summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/octeon-hcd.h
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/usb/host/octeon-hcd.h1847
1 files changed, 1847 insertions, 0 deletions
diff --git a/drivers/usb/host/octeon-hcd.h b/drivers/usb/host/octeon-hcd.h
new file mode 100644
index 000000000..9ed619c93
--- /dev/null
+++ b/drivers/usb/host/octeon-hcd.h
@@ -0,0 +1,1847 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Octeon HCD hardware register definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Some parts of the code were originally released under BSD license:
+ *
+ * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
+ * reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ *
+ * * Neither the name of Cavium Networks nor the names of
+ * its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written
+ * permission.
+ *
+ * This Software, including technical data, may be subject to U.S. export
+ * control laws, including the U.S. Export Administration Act and its associated
+ * regulations, and may be subject to export or import regulations in other
+ * countries.
+ *
+ * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
+ * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
+ * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
+ * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION
+ * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
+ * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
+ * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
+ * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+ * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
+ * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
+ */
+
+#ifndef __OCTEON_HCD_H__
+#define __OCTEON_HCD_H__
+
+#include <asm/bitfield.h>
+
+#define CVMX_USBCXBASE 0x00016F0010000000ull
+#define CVMX_USBCXREG1(reg, bid) \
+ (CVMX_ADD_IO_SEG(CVMX_USBCXBASE | reg) + \
+ ((bid) & 1) * 0x100000000000ull)
+#define CVMX_USBCXREG2(reg, bid, off) \
+ (CVMX_ADD_IO_SEG(CVMX_USBCXBASE | reg) + \
+ (((off) & 7) + ((bid) & 1) * 0x8000000000ull) * 32)
+
+#define CVMX_USBCX_GAHBCFG(bid) CVMX_USBCXREG1(0x008, bid)
+#define CVMX_USBCX_GHWCFG3(bid) CVMX_USBCXREG1(0x04c, bid)
+#define CVMX_USBCX_GINTMSK(bid) CVMX_USBCXREG1(0x018, bid)
+#define CVMX_USBCX_GINTSTS(bid) CVMX_USBCXREG1(0x014, bid)
+#define CVMX_USBCX_GNPTXFSIZ(bid) CVMX_USBCXREG1(0x028, bid)
+#define CVMX_USBCX_GNPTXSTS(bid) CVMX_USBCXREG1(0x02c, bid)
+#define CVMX_USBCX_GOTGCTL(bid) CVMX_USBCXREG1(0x000, bid)
+#define CVMX_USBCX_GRSTCTL(bid) CVMX_USBCXREG1(0x010, bid)
+#define CVMX_USBCX_GRXFSIZ(bid) CVMX_USBCXREG1(0x024, bid)
+#define CVMX_USBCX_GRXSTSPH(bid) CVMX_USBCXREG1(0x020, bid)
+#define CVMX_USBCX_GUSBCFG(bid) CVMX_USBCXREG1(0x00c, bid)
+#define CVMX_USBCX_HAINT(bid) CVMX_USBCXREG1(0x414, bid)
+#define CVMX_USBCX_HAINTMSK(bid) CVMX_USBCXREG1(0x418, bid)
+#define CVMX_USBCX_HCCHARX(off, bid) CVMX_USBCXREG2(0x500, bid, off)
+#define CVMX_USBCX_HCFG(bid) CVMX_USBCXREG1(0x400, bid)
+#define CVMX_USBCX_HCINTMSKX(off, bid) CVMX_USBCXREG2(0x50c, bid, off)
+#define CVMX_USBCX_HCINTX(off, bid) CVMX_USBCXREG2(0x508, bid, off)
+#define CVMX_USBCX_HCSPLTX(off, bid) CVMX_USBCXREG2(0x504, bid, off)
+#define CVMX_USBCX_HCTSIZX(off, bid) CVMX_USBCXREG2(0x510, bid, off)
+#define CVMX_USBCX_HFIR(bid) CVMX_USBCXREG1(0x404, bid)
+#define CVMX_USBCX_HFNUM(bid) CVMX_USBCXREG1(0x408, bid)
+#define CVMX_USBCX_HPRT(bid) CVMX_USBCXREG1(0x440, bid)
+#define CVMX_USBCX_HPTXFSIZ(bid) CVMX_USBCXREG1(0x100, bid)
+#define CVMX_USBCX_HPTXSTS(bid) CVMX_USBCXREG1(0x410, bid)
+
+#define CVMX_USBNXBID1(bid) (((bid) & 1) * 0x10000000ull)
+#define CVMX_USBNXBID2(bid) (((bid) & 1) * 0x100000000000ull)
+
+#define CVMX_USBNXREG1(reg, bid) \
+ (CVMX_ADD_IO_SEG(0x0001180068000000ull | reg) + CVMX_USBNXBID1(bid))
+#define CVMX_USBNXREG2(reg, bid) \
+ (CVMX_ADD_IO_SEG(0x00016F0000000000ull | reg) + CVMX_USBNXBID2(bid))
+
+#define CVMX_USBNX_CLK_CTL(bid) CVMX_USBNXREG1(0x10, bid)
+#define CVMX_USBNX_DMA0_INB_CHN0(bid) CVMX_USBNXREG2(0x818, bid)
+#define CVMX_USBNX_DMA0_OUTB_CHN0(bid) CVMX_USBNXREG2(0x858, bid)
+#define CVMX_USBNX_USBP_CTL_STATUS(bid) CVMX_USBNXREG1(0x18, bid)
+
+/**
+ * cvmx_usbc#_gahbcfg
+ *
+ * Core AHB Configuration Register (GAHBCFG)
+ *
+ * This register can be used to configure the core after power-on or a change in
+ * mode of operation. This register mainly contains AHB system-related
+ * configuration parameters. The AHB is the processor interface to the O2P USB
+ * core. In general, software need not know about this interface except to
+ * program the values as specified.
+ *
+ * The application must program this register as part of the O2P USB core
+ * initialization. Do not change this register after the initial programming.
+ */
+union cvmx_usbcx_gahbcfg {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_gahbcfg_s
+ * @ptxfemplvl: Periodic TxFIFO Empty Level (PTxFEmpLvl)
+ * Software should set this bit to 0x1.
+ * Indicates when the Periodic TxFIFO Empty Interrupt bit in the
+ * Core Interrupt register (GINTSTS.PTxFEmp) is triggered. This
+ * bit is used only in Slave mode.
+ * * 1'b0: GINTSTS.PTxFEmp interrupt indicates that the Periodic
+ * TxFIFO is half empty
+ * * 1'b1: GINTSTS.PTxFEmp interrupt indicates that the Periodic
+ * TxFIFO is completely empty
+ * @nptxfemplvl: Non-Periodic TxFIFO Empty Level (NPTxFEmpLvl)
+ * Software should set this bit to 0x1.
+ * Indicates when the Non-Periodic TxFIFO Empty Interrupt bit in
+ * the Core Interrupt register (GINTSTS.NPTxFEmp) is triggered.
+ * This bit is used only in Slave mode.
+ * * 1'b0: GINTSTS.NPTxFEmp interrupt indicates that the Non-
+ * Periodic TxFIFO is half empty
+ * * 1'b1: GINTSTS.NPTxFEmp interrupt indicates that the Non-
+ * Periodic TxFIFO is completely empty
+ * @dmaen: DMA Enable (DMAEn)
+ * * 1'b0: Core operates in Slave mode
+ * * 1'b1: Core operates in a DMA mode
+ * @hbstlen: Burst Length/Type (HBstLen)
+ * This field has not effect and should be left as 0x0.
+ * @glblintrmsk: Global Interrupt Mask (GlblIntrMsk)
+ * Software should set this field to 0x1.
+ * The application uses this bit to mask or unmask the interrupt
+ * line assertion to itself. Irrespective of this bit's setting,
+ * the interrupt status registers are updated by the core.
+ * * 1'b0: Mask the interrupt assertion to the application.
+ * * 1'b1: Unmask the interrupt assertion to the application.
+ */
+ struct cvmx_usbcx_gahbcfg_s {
+ __BITFIELD_FIELD(u32 reserved_9_31 : 23,
+ __BITFIELD_FIELD(u32 ptxfemplvl : 1,
+ __BITFIELD_FIELD(u32 nptxfemplvl : 1,
+ __BITFIELD_FIELD(u32 reserved_6_6 : 1,
+ __BITFIELD_FIELD(u32 dmaen : 1,
+ __BITFIELD_FIELD(u32 hbstlen : 4,
+ __BITFIELD_FIELD(u32 glblintrmsk : 1,
+ ;)))))))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_ghwcfg3
+ *
+ * User HW Config3 Register (GHWCFG3)
+ *
+ * This register contains the configuration options of the O2P USB core.
+ */
+union cvmx_usbcx_ghwcfg3 {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_ghwcfg3_s
+ * @dfifodepth: DFIFO Depth (DfifoDepth)
+ * This value is in terms of 32-bit words.
+ * * Minimum value is 32
+ * * Maximum value is 32768
+ * @ahbphysync: AHB and PHY Synchronous (AhbPhySync)
+ * Indicates whether AHB and PHY clocks are synchronous to
+ * each other.
+ * * 1'b0: No
+ * * 1'b1: Yes
+ * This bit is tied to 1.
+ * @rsttype: Reset Style for Clocked always Blocks in RTL (RstType)
+ * * 1'b0: Asynchronous reset is used in the core
+ * * 1'b1: Synchronous reset is used in the core
+ * @optfeature: Optional Features Removed (OptFeature)
+ * Indicates whether the User ID register, GPIO interface ports,
+ * and SOF toggle and counter ports were removed for gate count
+ * optimization.
+ * @vendor_control_interface_support: Vendor Control Interface Support
+ * * 1'b0: Vendor Control Interface is not available on the core.
+ * * 1'b1: Vendor Control Interface is available.
+ * @i2c_selection: I2C Selection
+ * * 1'b0: I2C Interface is not available on the core.
+ * * 1'b1: I2C Interface is available on the core.
+ * @otgen: OTG Function Enabled (OtgEn)
+ * The application uses this bit to indicate the O2P USB core's
+ * OTG capabilities.
+ * * 1'b0: Not OTG capable
+ * * 1'b1: OTG Capable
+ * @pktsizewidth: Width of Packet Size Counters (PktSizeWidth)
+ * * 3'b000: 4 bits
+ * * 3'b001: 5 bits
+ * * 3'b010: 6 bits
+ * * 3'b011: 7 bits
+ * * 3'b100: 8 bits
+ * * 3'b101: 9 bits
+ * * 3'b110: 10 bits
+ * * Others: Reserved
+ * @xfersizewidth: Width of Transfer Size Counters (XferSizeWidth)
+ * * 4'b0000: 11 bits
+ * * 4'b0001: 12 bits
+ * - ...
+ * * 4'b1000: 19 bits
+ * * Others: Reserved
+ */
+ struct cvmx_usbcx_ghwcfg3_s {
+ __BITFIELD_FIELD(u32 dfifodepth : 16,
+ __BITFIELD_FIELD(u32 reserved_13_15 : 3,
+ __BITFIELD_FIELD(u32 ahbphysync : 1,
+ __BITFIELD_FIELD(u32 rsttype : 1,
+ __BITFIELD_FIELD(u32 optfeature : 1,
+ __BITFIELD_FIELD(u32 vendor_control_interface_support : 1,
+ __BITFIELD_FIELD(u32 i2c_selection : 1,
+ __BITFIELD_FIELD(u32 otgen : 1,
+ __BITFIELD_FIELD(u32 pktsizewidth : 3,
+ __BITFIELD_FIELD(u32 xfersizewidth : 4,
+ ;))))))))))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_gintmsk
+ *
+ * Core Interrupt Mask Register (GINTMSK)
+ *
+ * This register works with the Core Interrupt register to interrupt the
+ * application. When an interrupt bit is masked, the interrupt associated with
+ * that bit will not be generated. However, the Core Interrupt (GINTSTS)
+ * register bit corresponding to that interrupt will still be set.
+ * Mask interrupt: 1'b0, Unmask interrupt: 1'b1
+ */
+union cvmx_usbcx_gintmsk {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_gintmsk_s
+ * @wkupintmsk: Resume/Remote Wakeup Detected Interrupt Mask
+ * (WkUpIntMsk)
+ * @sessreqintmsk: Session Request/New Session Detected Interrupt Mask
+ * (SessReqIntMsk)
+ * @disconnintmsk: Disconnect Detected Interrupt Mask (DisconnIntMsk)
+ * @conidstschngmsk: Connector ID Status Change Mask (ConIDStsChngMsk)
+ * @ptxfempmsk: Periodic TxFIFO Empty Mask (PTxFEmpMsk)
+ * @hchintmsk: Host Channels Interrupt Mask (HChIntMsk)
+ * @prtintmsk: Host Port Interrupt Mask (PrtIntMsk)
+ * @fetsuspmsk: Data Fetch Suspended Mask (FetSuspMsk)
+ * @incomplpmsk: Incomplete Periodic Transfer Mask (incomplPMsk)
+ * Incomplete Isochronous OUT Transfer Mask
+ * (incompISOOUTMsk)
+ * @incompisoinmsk: Incomplete Isochronous IN Transfer Mask
+ * (incompISOINMsk)
+ * @oepintmsk: OUT Endpoints Interrupt Mask (OEPIntMsk)
+ * @inepintmsk: IN Endpoints Interrupt Mask (INEPIntMsk)
+ * @epmismsk: Endpoint Mismatch Interrupt Mask (EPMisMsk)
+ * @eopfmsk: End of Periodic Frame Interrupt Mask (EOPFMsk)
+ * @isooutdropmsk: Isochronous OUT Packet Dropped Interrupt Mask
+ * (ISOOutDropMsk)
+ * @enumdonemsk: Enumeration Done Mask (EnumDoneMsk)
+ * @usbrstmsk: USB Reset Mask (USBRstMsk)
+ * @usbsuspmsk: USB Suspend Mask (USBSuspMsk)
+ * @erlysuspmsk: Early Suspend Mask (ErlySuspMsk)
+ * @i2cint: I2C Interrupt Mask (I2CINT)
+ * @ulpickintmsk: ULPI Carkit Interrupt Mask (ULPICKINTMsk)
+ * I2C Carkit Interrupt Mask (I2CCKINTMsk)
+ * @goutnakeffmsk: Global OUT NAK Effective Mask (GOUTNakEffMsk)
+ * @ginnakeffmsk: Global Non-Periodic IN NAK Effective Mask
+ * (GINNakEffMsk)
+ * @nptxfempmsk: Non-Periodic TxFIFO Empty Mask (NPTxFEmpMsk)
+ * @rxflvlmsk: Receive FIFO Non-Empty Mask (RxFLvlMsk)
+ * @sofmsk: Start of (micro)Frame Mask (SofMsk)
+ * @otgintmsk: OTG Interrupt Mask (OTGIntMsk)
+ * @modemismsk: Mode Mismatch Interrupt Mask (ModeMisMsk)
+ */
+ struct cvmx_usbcx_gintmsk_s {
+ __BITFIELD_FIELD(u32 wkupintmsk : 1,
+ __BITFIELD_FIELD(u32 sessreqintmsk : 1,
+ __BITFIELD_FIELD(u32 disconnintmsk : 1,
+ __BITFIELD_FIELD(u32 conidstschngmsk : 1,
+ __BITFIELD_FIELD(u32 reserved_27_27 : 1,
+ __BITFIELD_FIELD(u32 ptxfempmsk : 1,
+ __BITFIELD_FIELD(u32 hchintmsk : 1,
+ __BITFIELD_FIELD(u32 prtintmsk : 1,
+ __BITFIELD_FIELD(u32 reserved_23_23 : 1,
+ __BITFIELD_FIELD(u32 fetsuspmsk : 1,
+ __BITFIELD_FIELD(u32 incomplpmsk : 1,
+ __BITFIELD_FIELD(u32 incompisoinmsk : 1,
+ __BITFIELD_FIELD(u32 oepintmsk : 1,
+ __BITFIELD_FIELD(u32 inepintmsk : 1,
+ __BITFIELD_FIELD(u32 epmismsk : 1,
+ __BITFIELD_FIELD(u32 reserved_16_16 : 1,
+ __BITFIELD_FIELD(u32 eopfmsk : 1,
+ __BITFIELD_FIELD(u32 isooutdropmsk : 1,
+ __BITFIELD_FIELD(u32 enumdonemsk : 1,
+ __BITFIELD_FIELD(u32 usbrstmsk : 1,
+ __BITFIELD_FIELD(u32 usbsuspmsk : 1,
+ __BITFIELD_FIELD(u32 erlysuspmsk : 1,
+ __BITFIELD_FIELD(u32 i2cint : 1,
+ __BITFIELD_FIELD(u32 ulpickintmsk : 1,
+ __BITFIELD_FIELD(u32 goutnakeffmsk : 1,
+ __BITFIELD_FIELD(u32 ginnakeffmsk : 1,
+ __BITFIELD_FIELD(u32 nptxfempmsk : 1,
+ __BITFIELD_FIELD(u32 rxflvlmsk : 1,
+ __BITFIELD_FIELD(u32 sofmsk : 1,
+ __BITFIELD_FIELD(u32 otgintmsk : 1,
+ __BITFIELD_FIELD(u32 modemismsk : 1,
+ __BITFIELD_FIELD(u32 reserved_0_0 : 1,
+ ;))))))))))))))))))))))))))))))))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_gintsts
+ *
+ * Core Interrupt Register (GINTSTS)
+ *
+ * This register interrupts the application for system-level events in the
+ * current mode of operation (Device mode or Host mode). It is shown in
+ * Interrupt. Some of the bits in this register are valid only in Host mode,
+ * while others are valid in Device mode only. This register also indicates the
+ * current mode of operation. In order to clear the interrupt status bits of
+ * type R_SS_WC, the application must write 1'b1 into the bit. The FIFO status
+ * interrupts are read only; once software reads from or writes to the FIFO
+ * while servicing these interrupts, FIFO interrupt conditions are cleared
+ * automatically.
+ */
+union cvmx_usbcx_gintsts {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_gintsts_s
+ * @wkupint: Resume/Remote Wakeup Detected Interrupt (WkUpInt)
+ * In Device mode, this interrupt is asserted when a resume is
+ * detected on the USB. In Host mode, this interrupt is asserted
+ * when a remote wakeup is detected on the USB.
+ * For more information on how to use this interrupt, see "Partial
+ * Power-Down and Clock Gating Programming Model" on
+ * page 353.
+ * @sessreqint: Session Request/New Session Detected Interrupt
+ * (SessReqInt)
+ * In Host mode, this interrupt is asserted when a session request
+ * is detected from the device. In Device mode, this interrupt is
+ * asserted when the utmiotg_bvalid signal goes high.
+ * For more information on how to use this interrupt, see "Partial
+ * Power-Down and Clock Gating Programming Model" on
+ * page 353.
+ * @disconnint: Disconnect Detected Interrupt (DisconnInt)
+ * Asserted when a device disconnect is detected.
+ * @conidstschng: Connector ID Status Change (ConIDStsChng)
+ * The core sets this bit when there is a change in connector ID
+ * status.
+ * @ptxfemp: Periodic TxFIFO Empty (PTxFEmp)
+ * Asserted when the Periodic Transmit FIFO is either half or
+ * completely empty and there is space for at least one entry to be
+ * written in the Periodic Request Queue. The half or completely
+ * empty status is determined by the Periodic TxFIFO Empty Level
+ * bit in the Core AHB Configuration register
+ * (GAHBCFG.PTxFEmpLvl).
+ * @hchint: Host Channels Interrupt (HChInt)
+ * The core sets this bit to indicate that an interrupt is pending
+ * on one of the channels of the core (in Host mode). The
+ * application must read the Host All Channels Interrupt (HAINT)
+ * register to determine the exact number of the channel on which
+ * the interrupt occurred, and then read the corresponding Host
+ * Channel-n Interrupt (HCINTn) register to determine the exact
+ * cause of the interrupt. The application must clear the
+ * appropriate status bit in the HCINTn register to clear this bit.
+ * @prtint: Host Port Interrupt (PrtInt)
+ * The core sets this bit to indicate a change in port status of
+ * one of the O2P USB core ports in Host mode. The application must
+ * read the Host Port Control and Status (HPRT) register to
+ * determine the exact event that caused this interrupt. The
+ * application must clear the appropriate status bit in the Host
+ * Port Control and Status register to clear this bit.
+ * @fetsusp: Data Fetch Suspended (FetSusp)
+ * This interrupt is valid only in DMA mode. This interrupt
+ * indicates that the core has stopped fetching data for IN
+ * endpoints due to the unavailability of TxFIFO space or Request
+ * Queue space. This interrupt is used by the application for an
+ * endpoint mismatch algorithm.
+ * @incomplp: Incomplete Periodic Transfer (incomplP)
+ * In Host mode, the core sets this interrupt bit when there are
+ * incomplete periodic transactions still pending which are
+ * scheduled for the current microframe.
+ * Incomplete Isochronous OUT Transfer (incompISOOUT)
+ * The Device mode, the core sets this interrupt to indicate that
+ * there is at least one isochronous OUT endpoint on which the
+ * transfer is not completed in the current microframe. This
+ * interrupt is asserted along with the End of Periodic Frame
+ * Interrupt (EOPF) bit in this register.
+ * @incompisoin: Incomplete Isochronous IN Transfer (incompISOIN)
+ * The core sets this interrupt to indicate that there is at least
+ * one isochronous IN endpoint on which the transfer is not
+ * completed in the current microframe. This interrupt is asserted
+ * along with the End of Periodic Frame Interrupt (EOPF) bit in
+ * this register.
+ * @oepint: OUT Endpoints Interrupt (OEPInt)
+ * The core sets this bit to indicate that an interrupt is pending
+ * on one of the OUT endpoints of the core (in Device mode). The
+ * application must read the Device All Endpoints Interrupt
+ * (DAINT) register to determine the exact number of the OUT
+ * endpoint on which the interrupt occurred, and then read the
+ * corresponding Device OUT Endpoint-n Interrupt (DOEPINTn)
+ * register to determine the exact cause of the interrupt. The
+ * application must clear the appropriate status bit in the
+ * corresponding DOEPINTn register to clear this bit.
+ * @iepint: IN Endpoints Interrupt (IEPInt)
+ * The core sets this bit to indicate that an interrupt is pending
+ * on one of the IN endpoints of the core (in Device mode). The
+ * application must read the Device All Endpoints Interrupt
+ * (DAINT) register to determine the exact number of the IN
+ * endpoint on which the interrupt occurred, and then read the
+ * corresponding Device IN Endpoint-n Interrupt (DIEPINTn)
+ * register to determine the exact cause of the interrupt. The
+ * application must clear the appropriate status bit in the
+ * corresponding DIEPINTn register to clear this bit.
+ * @epmis: Endpoint Mismatch Interrupt (EPMis)
+ * Indicates that an IN token has been received for a non-periodic
+ * endpoint, but the data for another endpoint is present in the
+ * top of the Non-Periodic Transmit FIFO and the IN endpoint
+ * mismatch count programmed by the application has expired.
+ * @eopf: End of Periodic Frame Interrupt (EOPF)
+ * Indicates that the period specified in the Periodic Frame
+ * Interval field of the Device Configuration register
+ * (DCFG.PerFrInt) has been reached in the current microframe.
+ * @isooutdrop: Isochronous OUT Packet Dropped Interrupt (ISOOutDrop)
+ * The core sets this bit when it fails to write an isochronous OUT
+ * packet into the RxFIFO because the RxFIFO doesn't have
+ * enough space to accommodate a maximum packet size packet
+ * for the isochronous OUT endpoint.
+ * @enumdone: Enumeration Done (EnumDone)
+ * The core sets this bit to indicate that speed enumeration is
+ * complete. The application must read the Device Status (DSTS)
+ * register to obtain the enumerated speed.
+ * @usbrst: USB Reset (USBRst)
+ * The core sets this bit to indicate that a reset is detected on
+ * the USB.
+ * @usbsusp: USB Suspend (USBSusp)
+ * The core sets this bit to indicate that a suspend was detected
+ * on the USB. The core enters the Suspended state when there
+ * is no activity on the phy_line_state_i signal for an extended
+ * period of time.
+ * @erlysusp: Early Suspend (ErlySusp)
+ * The core sets this bit to indicate that an Idle state has been
+ * detected on the USB for 3 ms.
+ * @i2cint: I2C Interrupt (I2CINT)
+ * This bit is always 0x0.
+ * @ulpickint: ULPI Carkit Interrupt (ULPICKINT)
+ * This bit is always 0x0.
+ * @goutnakeff: Global OUT NAK Effective (GOUTNakEff)
+ * Indicates that the Set Global OUT NAK bit in the Device Control
+ * register (DCTL.SGOUTNak), set by the application, has taken
+ * effect in the core. This bit can be cleared by writing the Clear
+ * Global OUT NAK bit in the Device Control register
+ * (DCTL.CGOUTNak).
+ * @ginnakeff: Global IN Non-Periodic NAK Effective (GINNakEff)
+ * Indicates that the Set Global Non-Periodic IN NAK bit in the
+ * Device Control register (DCTL.SGNPInNak), set by the
+ * application, has taken effect in the core. That is, the core has
+ * sampled the Global IN NAK bit set by the application. This bit
+ * can be cleared by clearing the Clear Global Non-Periodic IN
+ * NAK bit in the Device Control register (DCTL.CGNPInNak).
+ * This interrupt does not necessarily mean that a NAK handshake
+ * is sent out on the USB. The STALL bit takes precedence over
+ * the NAK bit.
+ * @nptxfemp: Non-Periodic TxFIFO Empty (NPTxFEmp)
+ * This interrupt is asserted when the Non-Periodic TxFIFO is
+ * either half or completely empty, and there is space for at least
+ * one entry to be written to the Non-Periodic Transmit Request
+ * Queue. The half or completely empty status is determined by
+ * the Non-Periodic TxFIFO Empty Level bit in the Core AHB
+ * Configuration register (GAHBCFG.NPTxFEmpLvl).
+ * @rxflvl: RxFIFO Non-Empty (RxFLvl)
+ * Indicates that there is at least one packet pending to be read
+ * from the RxFIFO.
+ * @sof: Start of (micro)Frame (Sof)
+ * In Host mode, the core sets this bit to indicate that an SOF
+ * (FS), micro-SOF (HS), or Keep-Alive (LS) is transmitted on the
+ * USB. The application must write a 1 to this bit to clear the
+ * interrupt.
+ * In Device mode, in the core sets this bit to indicate that an
+ * SOF token has been received on the USB. The application can read
+ * the Device Status register to get the current (micro)frame
+ * number. This interrupt is seen only when the core is operating
+ * at either HS or FS.
+ * @otgint: OTG Interrupt (OTGInt)
+ * The core sets this bit to indicate an OTG protocol event. The
+ * application must read the OTG Interrupt Status (GOTGINT)
+ * register to determine the exact event that caused this
+ * interrupt. The application must clear the appropriate status bit
+ * in the GOTGINT register to clear this bit.
+ * @modemis: Mode Mismatch Interrupt (ModeMis)
+ * The core sets this bit when the application is trying to access:
+ * * A Host mode register, when the core is operating in Device
+ * mode
+ * * A Device mode register, when the core is operating in Host
+ * mode
+ * The register access is completed on the AHB with an OKAY
+ * response, but is ignored by the core internally and doesn't
+ * affect the operation of the core.
+ * @curmod: Current Mode of Operation (CurMod)
+ * Indicates the current mode of operation.
+ * * 1'b0: Device mode
+ * * 1'b1: Host mode
+ */
+ struct cvmx_usbcx_gintsts_s {
+ __BITFIELD_FIELD(u32 wkupint : 1,
+ __BITFIELD_FIELD(u32 sessreqint : 1,
+ __BITFIELD_FIELD(u32 disconnint : 1,
+ __BITFIELD_FIELD(u32 conidstschng : 1,
+ __BITFIELD_FIELD(u32 reserved_27_27 : 1,
+ __BITFIELD_FIELD(u32 ptxfemp : 1,
+ __BITFIELD_FIELD(u32 hchint : 1,
+ __BITFIELD_FIELD(u32 prtint : 1,
+ __BITFIELD_FIELD(u32 reserved_23_23 : 1,
+ __BITFIELD_FIELD(u32 fetsusp : 1,
+ __BITFIELD_FIELD(u32 incomplp : 1,
+ __BITFIELD_FIELD(u32 incompisoin : 1,
+ __BITFIELD_FIELD(u32 oepint : 1,
+ __BITFIELD_FIELD(u32 iepint : 1,
+ __BITFIELD_FIELD(u32 epmis : 1,
+ __BITFIELD_FIELD(u32 reserved_16_16 : 1,
+ __BITFIELD_FIELD(u32 eopf : 1,
+ __BITFIELD_FIELD(u32 isooutdrop : 1,
+ __BITFIELD_FIELD(u32 enumdone : 1,
+ __BITFIELD_FIELD(u32 usbrst : 1,
+ __BITFIELD_FIELD(u32 usbsusp : 1,
+ __BITFIELD_FIELD(u32 erlysusp : 1,
+ __BITFIELD_FIELD(u32 i2cint : 1,
+ __BITFIELD_FIELD(u32 ulpickint : 1,
+ __BITFIELD_FIELD(u32 goutnakeff : 1,
+ __BITFIELD_FIELD(u32 ginnakeff : 1,
+ __BITFIELD_FIELD(u32 nptxfemp : 1,
+ __BITFIELD_FIELD(u32 rxflvl : 1,
+ __BITFIELD_FIELD(u32 sof : 1,
+ __BITFIELD_FIELD(u32 otgint : 1,
+ __BITFIELD_FIELD(u32 modemis : 1,
+ __BITFIELD_FIELD(u32 curmod : 1,
+ ;))))))))))))))))))))))))))))))))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_gnptxfsiz
+ *
+ * Non-Periodic Transmit FIFO Size Register (GNPTXFSIZ)
+ *
+ * The application can program the RAM size and the memory start address for the
+ * Non-Periodic TxFIFO.
+ */
+union cvmx_usbcx_gnptxfsiz {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_gnptxfsiz_s
+ * @nptxfdep: Non-Periodic TxFIFO Depth (NPTxFDep)
+ * This value is in terms of 32-bit words.
+ * Minimum value is 16
+ * Maximum value is 32768
+ * @nptxfstaddr: Non-Periodic Transmit RAM Start Address (NPTxFStAddr)
+ * This field contains the memory start address for Non-Periodic
+ * Transmit FIFO RAM.
+ */
+ struct cvmx_usbcx_gnptxfsiz_s {
+ __BITFIELD_FIELD(u32 nptxfdep : 16,
+ __BITFIELD_FIELD(u32 nptxfstaddr : 16,
+ ;))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_gnptxsts
+ *
+ * Non-Periodic Transmit FIFO/Queue Status Register (GNPTXSTS)
+ *
+ * This read-only register contains the free space information for the
+ * Non-Periodic TxFIFO and the Non-Periodic Transmit Request Queue.
+ */
+union cvmx_usbcx_gnptxsts {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_gnptxsts_s
+ * @nptxqtop: Top of the Non-Periodic Transmit Request Queue (NPTxQTop)
+ * Entry in the Non-Periodic Tx Request Queue that is currently
+ * being processed by the MAC.
+ * * Bits [30:27]: Channel/endpoint number
+ * * Bits [26:25]:
+ * - 2'b00: IN/OUT token
+ * - 2'b01: Zero-length transmit packet (device IN/host OUT)
+ * - 2'b10: PING/CSPLIT token
+ * - 2'b11: Channel halt command
+ * * Bit [24]: Terminate (last entry for selected channel/endpoint)
+ * @nptxqspcavail: Non-Periodic Transmit Request Queue Space Available
+ * (NPTxQSpcAvail)
+ * Indicates the amount of free space available in the Non-
+ * Periodic Transmit Request Queue. This queue holds both IN
+ * and OUT requests in Host mode. Device mode has only IN
+ * requests.
+ * * 8'h0: Non-Periodic Transmit Request Queue is full
+ * * 8'h1: 1 location available
+ * * 8'h2: 2 locations available
+ * * n: n locations available (0..8)
+ * * Others: Reserved
+ * @nptxfspcavail: Non-Periodic TxFIFO Space Avail (NPTxFSpcAvail)
+ * Indicates the amount of free space available in the Non-
+ * Periodic TxFIFO.
+ * Values are in terms of 32-bit words.
+ * * 16'h0: Non-Periodic TxFIFO is full
+ * * 16'h1: 1 word available
+ * * 16'h2: 2 words available
+ * * 16'hn: n words available (where 0..32768)
+ * * 16'h8000: 32768 words available
+ * * Others: Reserved
+ */
+ struct cvmx_usbcx_gnptxsts_s {
+ __BITFIELD_FIELD(u32 reserved_31_31 : 1,
+ __BITFIELD_FIELD(u32 nptxqtop : 7,
+ __BITFIELD_FIELD(u32 nptxqspcavail : 8,
+ __BITFIELD_FIELD(u32 nptxfspcavail : 16,
+ ;))))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_grstctl
+ *
+ * Core Reset Register (GRSTCTL)
+ *
+ * The application uses this register to reset various hardware features inside
+ * the core.
+ */
+union cvmx_usbcx_grstctl {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_grstctl_s
+ * @ahbidle: AHB Master Idle (AHBIdle)
+ * Indicates that the AHB Master State Machine is in the IDLE
+ * condition.
+ * @dmareq: DMA Request Signal (DMAReq)
+ * Indicates that the DMA request is in progress. Used for debug.
+ * @txfnum: TxFIFO Number (TxFNum)
+ * This is the FIFO number that must be flushed using the TxFIFO
+ * Flush bit. This field must not be changed until the core clears
+ * the TxFIFO Flush bit.
+ * * 5'h0: Non-Periodic TxFIFO flush
+ * * 5'h1: Periodic TxFIFO 1 flush in Device mode or Periodic
+ * TxFIFO flush in Host mode
+ * * 5'h2: Periodic TxFIFO 2 flush in Device mode
+ * - ...
+ * * 5'hF: Periodic TxFIFO 15 flush in Device mode
+ * * 5'h10: Flush all the Periodic and Non-Periodic TxFIFOs in the
+ * core
+ * @txfflsh: TxFIFO Flush (TxFFlsh)
+ * This bit selectively flushes a single or all transmit FIFOs, but
+ * cannot do so if the core is in the midst of a transaction.
+ * The application must only write this bit after checking that the
+ * core is neither writing to the TxFIFO nor reading from the
+ * TxFIFO.
+ * The application must wait until the core clears this bit before
+ * performing any operations. This bit takes 8 clocks (of phy_clk
+ * or hclk, whichever is slower) to clear.
+ * @rxfflsh: RxFIFO Flush (RxFFlsh)
+ * The application can flush the entire RxFIFO using this bit, but
+ * must first ensure that the core is not in the middle of a
+ * transaction.
+ * The application must only write to this bit after checking that
+ * the core is neither reading from the RxFIFO nor writing to the
+ * RxFIFO.
+ * The application must wait until the bit is cleared before
+ * performing any other operations. This bit will take 8 clocks
+ * (slowest of PHY or AHB clock) to clear.
+ * @intknqflsh: IN Token Sequence Learning Queue Flush (INTknQFlsh)
+ * The application writes this bit to flush the IN Token Sequence
+ * Learning Queue.
+ * @frmcntrrst: Host Frame Counter Reset (FrmCntrRst)
+ * The application writes this bit to reset the (micro)frame number
+ * counter inside the core. When the (micro)frame counter is reset,
+ * the subsequent SOF sent out by the core will have a
+ * (micro)frame number of 0.
+ * @hsftrst: HClk Soft Reset (HSftRst)
+ * The application uses this bit to flush the control logic in the
+ * AHB Clock domain. Only AHB Clock Domain pipelines are reset.
+ * * FIFOs are not flushed with this bit.
+ * * All state machines in the AHB clock domain are reset to the
+ * Idle state after terminating the transactions on the AHB,
+ * following the protocol.
+ * * CSR control bits used by the AHB clock domain state
+ * machines are cleared.
+ * * To clear this interrupt, status mask bits that control the
+ * interrupt status and are generated by the AHB clock domain
+ * state machine are cleared.
+ * * Because interrupt status bits are not cleared, the application
+ * can get the status of any core events that occurred after it set
+ * this bit.
+ * This is a self-clearing bit that the core clears after all
+ * necessary logic is reset in the core. This may take several
+ * clocks, depending on the core's current state.
+ * @csftrst: Core Soft Reset (CSftRst)
+ * Resets the hclk and phy_clock domains as follows:
+ * * Clears the interrupts and all the CSR registers except the
+ * following register bits:
+ * - PCGCCTL.RstPdwnModule
+ * - PCGCCTL.GateHclk
+ * - PCGCCTL.PwrClmp
+ * - PCGCCTL.StopPPhyLPwrClkSelclk
+ * - GUSBCFG.PhyLPwrClkSel
+ * - GUSBCFG.DDRSel
+ * - GUSBCFG.PHYSel
+ * - GUSBCFG.FSIntf
+ * - GUSBCFG.ULPI_UTMI_Sel
+ * - GUSBCFG.PHYIf
+ * - HCFG.FSLSPclkSel
+ * - DCFG.DevSpd
+ * * All module state machines (except the AHB Slave Unit) are
+ * reset to the IDLE state, and all the transmit FIFOs and the
+ * receive FIFO are flushed.
+ * * Any transactions on the AHB Master are terminated as soon
+ * as possible, after gracefully completing the last data phase of
+ * an AHB transfer. Any transactions on the USB are terminated
+ * immediately.
+ * The application can write to this bit any time it wants to reset
+ * the core. This is a self-clearing bit and the core clears this
+ * bit after all the necessary logic is reset in the core, which
+ * may take several clocks, depending on the current state of the
+ * core. Once this bit is cleared software should wait at least 3
+ * PHY clocks before doing any access to the PHY domain
+ * (synchronization delay). Software should also should check that
+ * bit 31 of this register is 1 (AHB Master is IDLE) before
+ * starting any operation.
+ * Typically software reset is used during software development
+ * and also when you dynamically change the PHY selection bits
+ * in the USB configuration registers listed above. When you
+ * change the PHY, the corresponding clock for the PHY is
+ * selected and used in the PHY domain. Once a new clock is
+ * selected, the PHY domain has to be reset for proper operation.
+ */
+ struct cvmx_usbcx_grstctl_s {
+ __BITFIELD_FIELD(u32 ahbidle : 1,
+ __BITFIELD_FIELD(u32 dmareq : 1,
+ __BITFIELD_FIELD(u32 reserved_11_29 : 19,
+ __BITFIELD_FIELD(u32 txfnum : 5,
+ __BITFIELD_FIELD(u32 txfflsh : 1,
+ __BITFIELD_FIELD(u32 rxfflsh : 1,
+ __BITFIELD_FIELD(u32 intknqflsh : 1,
+ __BITFIELD_FIELD(u32 frmcntrrst : 1,
+ __BITFIELD_FIELD(u32 hsftrst : 1,
+ __BITFIELD_FIELD(u32 csftrst : 1,
+ ;))))))))))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_grxfsiz
+ *
+ * Receive FIFO Size Register (GRXFSIZ)
+ *
+ * The application can program the RAM size that must be allocated to the
+ * RxFIFO.
+ */
+union cvmx_usbcx_grxfsiz {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_grxfsiz_s
+ * @rxfdep: RxFIFO Depth (RxFDep)
+ * This value is in terms of 32-bit words.
+ * * Minimum value is 16
+ * * Maximum value is 32768
+ */
+ struct cvmx_usbcx_grxfsiz_s {
+ __BITFIELD_FIELD(u32 reserved_16_31 : 16,
+ __BITFIELD_FIELD(u32 rxfdep : 16,
+ ;))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_grxstsph
+ *
+ * Receive Status Read and Pop Register, Host Mode (GRXSTSPH)
+ *
+ * A read to the Receive Status Read and Pop register returns and additionally
+ * pops the top data entry out of the RxFIFO.
+ * This Description is only valid when the core is in Host Mode. For Device Mode
+ * use USBC_GRXSTSPD instead.
+ * NOTE: GRXSTSPH and GRXSTSPD are physically the same register and share the
+ * same offset in the O2P USB core. The offset difference shown in this
+ * document is for software clarity and is actually ignored by the
+ * hardware.
+ */
+union cvmx_usbcx_grxstsph {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_grxstsph_s
+ * @pktsts: Packet Status (PktSts)
+ * Indicates the status of the received packet
+ * * 4'b0010: IN data packet received
+ * * 4'b0011: IN transfer completed (triggers an interrupt)
+ * * 4'b0101: Data toggle error (triggers an interrupt)
+ * * 4'b0111: Channel halted (triggers an interrupt)
+ * * Others: Reserved
+ * @dpid: Data PID (DPID)
+ * * 2'b00: DATA0
+ * * 2'b10: DATA1
+ * * 2'b01: DATA2
+ * * 2'b11: MDATA
+ * @bcnt: Byte Count (BCnt)
+ * Indicates the byte count of the received IN data packet
+ * @chnum: Channel Number (ChNum)
+ * Indicates the channel number to which the current received
+ * packet belongs.
+ */
+ struct cvmx_usbcx_grxstsph_s {
+ __BITFIELD_FIELD(u32 reserved_21_31 : 11,
+ __BITFIELD_FIELD(u32 pktsts : 4,
+ __BITFIELD_FIELD(u32 dpid : 2,
+ __BITFIELD_FIELD(u32 bcnt : 11,
+ __BITFIELD_FIELD(u32 chnum : 4,
+ ;)))))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_gusbcfg
+ *
+ * Core USB Configuration Register (GUSBCFG)
+ *
+ * This register can be used to configure the core after power-on or a changing
+ * to Host mode or Device mode. It contains USB and USB-PHY related
+ * configuration parameters. The application must program this register before
+ * starting any transactions on either the AHB or the USB. Do not make changes
+ * to this register after the initial programming.
+ */
+union cvmx_usbcx_gusbcfg {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_gusbcfg_s
+ * @otgi2csel: UTMIFS or I2C Interface Select (OtgI2CSel)
+ * This bit is always 0x0.
+ * @phylpwrclksel: PHY Low-Power Clock Select (PhyLPwrClkSel)
+ * Software should set this bit to 0x0.
+ * Selects either 480-MHz or 48-MHz (low-power) PHY mode. In
+ * FS and LS modes, the PHY can usually operate on a 48-MHz
+ * clock to save power.
+ * * 1'b0: 480-MHz Internal PLL clock
+ * * 1'b1: 48-MHz External Clock
+ * In 480 MHz mode, the UTMI interface operates at either 60 or
+ * 30-MHz, depending upon whether 8- or 16-bit data width is
+ * selected. In 48-MHz mode, the UTMI interface operates at 48
+ * MHz in FS mode and at either 48 or 6 MHz in LS mode
+ * (depending on the PHY vendor).
+ * This bit drives the utmi_fsls_low_power core output signal, and
+ * is valid only for UTMI+ PHYs.
+ * @usbtrdtim: USB Turnaround Time (USBTrdTim)
+ * Sets the turnaround time in PHY clocks.
+ * Specifies the response time for a MAC request to the Packet
+ * FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM).
+ * This must be programmed to 0x5.
+ * @hnpcap: HNP-Capable (HNPCap)
+ * This bit is always 0x0.
+ * @srpcap: SRP-Capable (SRPCap)
+ * This bit is always 0x0.
+ * @ddrsel: ULPI DDR Select (DDRSel)
+ * Software should set this bit to 0x0.
+ * @physel: USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial
+ * Software should set this bit to 0x0.
+ * @fsintf: Full-Speed Serial Interface Select (FSIntf)
+ * Software should set this bit to 0x0.
+ * @ulpi_utmi_sel: ULPI or UTMI+ Select (ULPI_UTMI_Sel)
+ * This bit is always 0x0.
+ * @phyif: PHY Interface (PHYIf)
+ * This bit is always 0x1.
+ * @toutcal: HS/FS Timeout Calibration (TOutCal)
+ * The number of PHY clocks that the application programs in this
+ * field is added to the high-speed/full-speed interpacket timeout
+ * duration in the core to account for any additional delays
+ * introduced by the PHY. This may be required, since the delay
+ * introduced by the PHY in generating the linestate condition may
+ * vary from one PHY to another.
+ * The USB standard timeout value for high-speed operation is
+ * 736 to 816 (inclusive) bit times. The USB standard timeout
+ * value for full-speed operation is 16 to 18 (inclusive) bit
+ * times. The application must program this field based on the
+ * speed of enumeration. The number of bit times added per PHY
+ * clock are:
+ * High-speed operation:
+ * * One 30-MHz PHY clock = 16 bit times
+ * * One 60-MHz PHY clock = 8 bit times
+ * Full-speed operation:
+ * * One 30-MHz PHY clock = 0.4 bit times
+ * * One 60-MHz PHY clock = 0.2 bit times
+ * * One 48-MHz PHY clock = 0.25 bit times
+ */
+ struct cvmx_usbcx_gusbcfg_s {
+ __BITFIELD_FIELD(u32 reserved_17_31 : 15,
+ __BITFIELD_FIELD(u32 otgi2csel : 1,
+ __BITFIELD_FIELD(u32 phylpwrclksel : 1,
+ __BITFIELD_FIELD(u32 reserved_14_14 : 1,
+ __BITFIELD_FIELD(u32 usbtrdtim : 4,
+ __BITFIELD_FIELD(u32 hnpcap : 1,
+ __BITFIELD_FIELD(u32 srpcap : 1,
+ __BITFIELD_FIELD(u32 ddrsel : 1,
+ __BITFIELD_FIELD(u32 physel : 1,
+ __BITFIELD_FIELD(u32 fsintf : 1,
+ __BITFIELD_FIELD(u32 ulpi_utmi_sel : 1,
+ __BITFIELD_FIELD(u32 phyif : 1,
+ __BITFIELD_FIELD(u32 toutcal : 3,
+ ;)))))))))))))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_haint
+ *
+ * Host All Channels Interrupt Register (HAINT)
+ *
+ * When a significant event occurs on a channel, the Host All Channels Interrupt
+ * register interrupts the application using the Host Channels Interrupt bit of
+ * the Core Interrupt register (GINTSTS.HChInt). This is shown in Interrupt.
+ * There is one interrupt bit per channel, up to a maximum of 16 bits. Bits in
+ * this register are set and cleared when the application sets and clears bits
+ * in the corresponding Host Channel-n Interrupt register.
+ */
+union cvmx_usbcx_haint {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_haint_s
+ * @haint: Channel Interrupts (HAINT)
+ * One bit per channel: Bit 0 for Channel 0, bit 15 for Channel 15
+ */
+ struct cvmx_usbcx_haint_s {
+ __BITFIELD_FIELD(u32 reserved_16_31 : 16,
+ __BITFIELD_FIELD(u32 haint : 16,
+ ;))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_haintmsk
+ *
+ * Host All Channels Interrupt Mask Register (HAINTMSK)
+ *
+ * The Host All Channel Interrupt Mask register works with the Host All Channel
+ * Interrupt register to interrupt the application when an event occurs on a
+ * channel. There is one interrupt mask bit per channel, up to a maximum of 16
+ * bits.
+ * Mask interrupt: 1'b0 Unmask interrupt: 1'b1
+ */
+union cvmx_usbcx_haintmsk {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_haintmsk_s
+ * @haintmsk: Channel Interrupt Mask (HAINTMsk)
+ * One bit per channel: Bit 0 for channel 0, bit 15 for channel 15
+ */
+ struct cvmx_usbcx_haintmsk_s {
+ __BITFIELD_FIELD(u32 reserved_16_31 : 16,
+ __BITFIELD_FIELD(u32 haintmsk : 16,
+ ;))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_hcchar#
+ *
+ * Host Channel-n Characteristics Register (HCCHAR)
+ *
+ */
+union cvmx_usbcx_hccharx {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_hccharx_s
+ * @chena: Channel Enable (ChEna)
+ * This field is set by the application and cleared by the OTG
+ * host.
+ * * 1'b0: Channel disabled
+ * * 1'b1: Channel enabled
+ * @chdis: Channel Disable (ChDis)
+ * The application sets this bit to stop transmitting/receiving
+ * data on a channel, even before the transfer for that channel is
+ * complete. The application must wait for the Channel Disabled
+ * interrupt before treating the channel as disabled.
+ * @oddfrm: Odd Frame (OddFrm)
+ * This field is set (reset) by the application to indicate that
+ * the OTG host must perform a transfer in an odd (micro)frame.
+ * This field is applicable for only periodic (isochronous and
+ * interrupt) transactions.
+ * * 1'b0: Even (micro)frame
+ * * 1'b1: Odd (micro)frame
+ * @devaddr: Device Address (DevAddr)
+ * This field selects the specific device serving as the data
+ * source or sink.
+ * @ec: Multi Count (MC) / Error Count (EC)
+ * When the Split Enable bit of the Host Channel-n Split Control
+ * register (HCSPLTn.SpltEna) is reset (1'b0), this field indicates
+ * to the host the number of transactions that should be executed
+ * per microframe for this endpoint.
+ * * 2'b00: Reserved. This field yields undefined results.
+ * * 2'b01: 1 transaction
+ * * 2'b10: 2 transactions to be issued for this endpoint per
+ * microframe
+ * * 2'b11: 3 transactions to be issued for this endpoint per
+ * microframe
+ * When HCSPLTn.SpltEna is set (1'b1), this field indicates the
+ * number of immediate retries to be performed for a periodic split
+ * transactions on transaction errors. This field must be set to at
+ * least 2'b01.
+ * @eptype: Endpoint Type (EPType)
+ * Indicates the transfer type selected.
+ * * 2'b00: Control
+ * * 2'b01: Isochronous
+ * * 2'b10: Bulk
+ * * 2'b11: Interrupt
+ * @lspddev: Low-Speed Device (LSpdDev)
+ * This field is set by the application to indicate that this
+ * channel is communicating to a low-speed device.
+ * @epdir: Endpoint Direction (EPDir)
+ * Indicates whether the transaction is IN or OUT.
+ * * 1'b0: OUT
+ * * 1'b1: IN
+ * @epnum: Endpoint Number (EPNum)
+ * Indicates the endpoint number on the device serving as the
+ * data source or sink.
+ * @mps: Maximum Packet Size (MPS)
+ * Indicates the maximum packet size of the associated endpoint.
+ */
+ struct cvmx_usbcx_hccharx_s {
+ __BITFIELD_FIELD(u32 chena : 1,
+ __BITFIELD_FIELD(u32 chdis : 1,
+ __BITFIELD_FIELD(u32 oddfrm : 1,
+ __BITFIELD_FIELD(u32 devaddr : 7,
+ __BITFIELD_FIELD(u32 ec : 2,
+ __BITFIELD_FIELD(u32 eptype : 2,
+ __BITFIELD_FIELD(u32 lspddev : 1,
+ __BITFIELD_FIELD(u32 reserved_16_16 : 1,
+ __BITFIELD_FIELD(u32 epdir : 1,
+ __BITFIELD_FIELD(u32 epnum : 4,
+ __BITFIELD_FIELD(u32 mps : 11,
+ ;)))))))))))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_hcfg
+ *
+ * Host Configuration Register (HCFG)
+ *
+ * This register configures the core after power-on. Do not make changes to this
+ * register after initializing the host.
+ */
+union cvmx_usbcx_hcfg {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_hcfg_s
+ * @fslssupp: FS- and LS-Only Support (FSLSSupp)
+ * The application uses this bit to control the core's enumeration
+ * speed. Using this bit, the application can make the core
+ * enumerate as a FS host, even if the connected device supports
+ * HS traffic. Do not make changes to this field after initial
+ * programming.
+ * * 1'b0: HS/FS/LS, based on the maximum speed supported by
+ * the connected device
+ * * 1'b1: FS/LS-only, even if the connected device can support HS
+ * @fslspclksel: FS/LS PHY Clock Select (FSLSPclkSel)
+ * When the core is in FS Host mode
+ * * 2'b00: PHY clock is running at 30/60 MHz
+ * * 2'b01: PHY clock is running at 48 MHz
+ * * Others: Reserved
+ * When the core is in LS Host mode
+ * * 2'b00: PHY clock is running at 30/60 MHz. When the
+ * UTMI+/ULPI PHY Low Power mode is not selected, use
+ * 30/60 MHz.
+ * * 2'b01: PHY clock is running at 48 MHz. When the UTMI+
+ * PHY Low Power mode is selected, use 48MHz if the PHY
+ * supplies a 48 MHz clock during LS mode.
+ * * 2'b10: PHY clock is running at 6 MHz. In USB 1.1 FS mode,
+ * use 6 MHz when the UTMI+ PHY Low Power mode is
+ * selected and the PHY supplies a 6 MHz clock during LS
+ * mode. If you select a 6 MHz clock during LS mode, you must
+ * do a soft reset.
+ * * 2'b11: Reserved
+ */
+ struct cvmx_usbcx_hcfg_s {
+ __BITFIELD_FIELD(u32 reserved_3_31 : 29,
+ __BITFIELD_FIELD(u32 fslssupp : 1,
+ __BITFIELD_FIELD(u32 fslspclksel : 2,
+ ;)))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_hcint#
+ *
+ * Host Channel-n Interrupt Register (HCINT)
+ *
+ * This register indicates the status of a channel with respect to USB- and
+ * AHB-related events. The application must read this register when the Host
+ * Channels Interrupt bit of the Core Interrupt register (GINTSTS.HChInt) is
+ * set. Before the application can read this register, it must first read
+ * the Host All Channels Interrupt (HAINT) register to get the exact channel
+ * number for the Host Channel-n Interrupt register. The application must clear
+ * the appropriate bit in this register to clear the corresponding bits in the
+ * HAINT and GINTSTS registers.
+ */
+union cvmx_usbcx_hcintx {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_hcintx_s
+ * @datatglerr: Data Toggle Error (DataTglErr)
+ * @frmovrun: Frame Overrun (FrmOvrun)
+ * @bblerr: Babble Error (BblErr)
+ * @xacterr: Transaction Error (XactErr)
+ * @nyet: NYET Response Received Interrupt (NYET)
+ * @ack: ACK Response Received Interrupt (ACK)
+ * @nak: NAK Response Received Interrupt (NAK)
+ * @stall: STALL Response Received Interrupt (STALL)
+ * @ahberr: This bit is always 0x0.
+ * @chhltd: Channel Halted (ChHltd)
+ * Indicates the transfer completed abnormally either because of
+ * any USB transaction error or in response to disable request by
+ * the application.
+ * @xfercompl: Transfer Completed (XferCompl)
+ * Transfer completed normally without any errors.
+ */
+ struct cvmx_usbcx_hcintx_s {
+ __BITFIELD_FIELD(u32 reserved_11_31 : 21,
+ __BITFIELD_FIELD(u32 datatglerr : 1,
+ __BITFIELD_FIELD(u32 frmovrun : 1,
+ __BITFIELD_FIELD(u32 bblerr : 1,
+ __BITFIELD_FIELD(u32 xacterr : 1,
+ __BITFIELD_FIELD(u32 nyet : 1,
+ __BITFIELD_FIELD(u32 ack : 1,
+ __BITFIELD_FIELD(u32 nak : 1,
+ __BITFIELD_FIELD(u32 stall : 1,
+ __BITFIELD_FIELD(u32 ahberr : 1,
+ __BITFIELD_FIELD(u32 chhltd : 1,
+ __BITFIELD_FIELD(u32 xfercompl : 1,
+ ;))))))))))))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_hcintmsk#
+ *
+ * Host Channel-n Interrupt Mask Register (HCINTMSKn)
+ *
+ * This register reflects the mask for each channel status described in the
+ * previous section.
+ * Mask interrupt: 1'b0 Unmask interrupt: 1'b1
+ */
+union cvmx_usbcx_hcintmskx {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_hcintmskx_s
+ * @datatglerrmsk: Data Toggle Error Mask (DataTglErrMsk)
+ * @frmovrunmsk: Frame Overrun Mask (FrmOvrunMsk)
+ * @bblerrmsk: Babble Error Mask (BblErrMsk)
+ * @xacterrmsk: Transaction Error Mask (XactErrMsk)
+ * @nyetmsk: NYET Response Received Interrupt Mask (NyetMsk)
+ * @ackmsk: ACK Response Received Interrupt Mask (AckMsk)
+ * @nakmsk: NAK Response Received Interrupt Mask (NakMsk)
+ * @stallmsk: STALL Response Received Interrupt Mask (StallMsk)
+ * @ahberrmsk: AHB Error Mask (AHBErrMsk)
+ * @chhltdmsk: Channel Halted Mask (ChHltdMsk)
+ * @xfercomplmsk: Transfer Completed Mask (XferComplMsk)
+ */
+ struct cvmx_usbcx_hcintmskx_s {
+ __BITFIELD_FIELD(u32 reserved_11_31 : 21,
+ __BITFIELD_FIELD(u32 datatglerrmsk : 1,
+ __BITFIELD_FIELD(u32 frmovrunmsk : 1,
+ __BITFIELD_FIELD(u32 bblerrmsk : 1,
+ __BITFIELD_FIELD(u32 xacterrmsk : 1,
+ __BITFIELD_FIELD(u32 nyetmsk : 1,
+ __BITFIELD_FIELD(u32 ackmsk : 1,
+ __BITFIELD_FIELD(u32 nakmsk : 1,
+ __BITFIELD_FIELD(u32 stallmsk : 1,
+ __BITFIELD_FIELD(u32 ahberrmsk : 1,
+ __BITFIELD_FIELD(u32 chhltdmsk : 1,
+ __BITFIELD_FIELD(u32 xfercomplmsk : 1,
+ ;))))))))))))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_hcsplt#
+ *
+ * Host Channel-n Split Control Register (HCSPLT)
+ *
+ */
+union cvmx_usbcx_hcspltx {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_hcspltx_s
+ * @spltena: Split Enable (SpltEna)
+ * The application sets this field to indicate that this channel is
+ * enabled to perform split transactions.
+ * @compsplt: Do Complete Split (CompSplt)
+ * The application sets this field to request the OTG host to
+ * perform a complete split transaction.
+ * @xactpos: Transaction Position (XactPos)
+ * This field is used to determine whether to send all, first,
+ * middle, or last payloads with each OUT transaction.
+ * * 2'b11: All. This is the entire data payload is of this
+ * transaction (which is less than or equal to 188 bytes).
+ * * 2'b10: Begin. This is the first data payload of this
+ * transaction (which is larger than 188 bytes).
+ * * 2'b00: Mid. This is the middle payload of this transaction
+ * (which is larger than 188 bytes).
+ * * 2'b01: End. This is the last payload of this transaction
+ * (which is larger than 188 bytes).
+ * @hubaddr: Hub Address (HubAddr)
+ * This field holds the device address of the transaction
+ * translator's hub.
+ * @prtaddr: Port Address (PrtAddr)
+ * This field is the port number of the recipient transaction
+ * translator.
+ */
+ struct cvmx_usbcx_hcspltx_s {
+ __BITFIELD_FIELD(u32 spltena : 1,
+ __BITFIELD_FIELD(u32 reserved_17_30 : 14,
+ __BITFIELD_FIELD(u32 compsplt : 1,
+ __BITFIELD_FIELD(u32 xactpos : 2,
+ __BITFIELD_FIELD(u32 hubaddr : 7,
+ __BITFIELD_FIELD(u32 prtaddr : 7,
+ ;))))))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_hctsiz#
+ *
+ * Host Channel-n Transfer Size Register (HCTSIZ)
+ *
+ */
+union cvmx_usbcx_hctsizx {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_hctsizx_s
+ * @dopng: Do Ping (DoPng)
+ * Setting this field to 1 directs the host to do PING protocol.
+ * @pid: PID (Pid)
+ * The application programs this field with the type of PID to use
+ * for the initial transaction. The host will maintain this field
+ * for the rest of the transfer.
+ * * 2'b00: DATA0
+ * * 2'b01: DATA2
+ * * 2'b10: DATA1
+ * * 2'b11: MDATA (non-control)/SETUP (control)
+ * @pktcnt: Packet Count (PktCnt)
+ * This field is programmed by the application with the expected
+ * number of packets to be transmitted (OUT) or received (IN).
+ * The host decrements this count on every successful
+ * transmission or reception of an OUT/IN packet. Once this count
+ * reaches zero, the application is interrupted to indicate normal
+ * completion.
+ * @xfersize: Transfer Size (XferSize)
+ * For an OUT, this field is the number of data bytes the host will
+ * send during the transfer.
+ * For an IN, this field is the buffer size that the application
+ * has reserved for the transfer. The application is expected to
+ * program this field as an integer multiple of the maximum packet
+ * size for IN transactions (periodic and non-periodic).
+ */
+ struct cvmx_usbcx_hctsizx_s {
+ __BITFIELD_FIELD(u32 dopng : 1,
+ __BITFIELD_FIELD(u32 pid : 2,
+ __BITFIELD_FIELD(u32 pktcnt : 10,
+ __BITFIELD_FIELD(u32 xfersize : 19,
+ ;))))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_hfir
+ *
+ * Host Frame Interval Register (HFIR)
+ *
+ * This register stores the frame interval information for the current speed to
+ * which the O2P USB core has enumerated.
+ */
+union cvmx_usbcx_hfir {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_hfir_s
+ * @frint: Frame Interval (FrInt)
+ * The value that the application programs to this field specifies
+ * the interval between two consecutive SOFs (FS) or micro-
+ * SOFs (HS) or Keep-Alive tokens (HS). This field contains the
+ * number of PHY clocks that constitute the required frame
+ * interval. The default value set in this field for a FS operation
+ * when the PHY clock frequency is 60 MHz. The application can
+ * write a value to this register only after the Port Enable bit of
+ * the Host Port Control and Status register (HPRT.PrtEnaPort)
+ * has been set. If no value is programmed, the core calculates
+ * the value based on the PHY clock specified in the FS/LS PHY
+ * Clock Select field of the Host Configuration register
+ * (HCFG.FSLSPclkSel). Do not change the value of this field
+ * after the initial configuration.
+ * * 125 us (PHY clock frequency for HS)
+ * * 1 ms (PHY clock frequency for FS/LS)
+ */
+ struct cvmx_usbcx_hfir_s {
+ __BITFIELD_FIELD(u32 reserved_16_31 : 16,
+ __BITFIELD_FIELD(u32 frint : 16,
+ ;))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_hfnum
+ *
+ * Host Frame Number/Frame Time Remaining Register (HFNUM)
+ *
+ * This register indicates the current frame number.
+ * It also indicates the time remaining (in terms of the number of PHY clocks)
+ * in the current (micro)frame.
+ */
+union cvmx_usbcx_hfnum {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_hfnum_s
+ * @frrem: Frame Time Remaining (FrRem)
+ * Indicates the amount of time remaining in the current
+ * microframe (HS) or frame (FS/LS), in terms of PHY clocks.
+ * This field decrements on each PHY clock. When it reaches
+ * zero, this field is reloaded with the value in the Frame
+ * Interval register and a new SOF is transmitted on the USB.
+ * @frnum: Frame Number (FrNum)
+ * This field increments when a new SOF is transmitted on the
+ * USB, and is reset to 0 when it reaches 16'h3FFF.
+ */
+ struct cvmx_usbcx_hfnum_s {
+ __BITFIELD_FIELD(u32 frrem : 16,
+ __BITFIELD_FIELD(u32 frnum : 16,
+ ;))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_hprt
+ *
+ * Host Port Control and Status Register (HPRT)
+ *
+ * This register is available in both Host and Device modes.
+ * Currently, the OTG Host supports only one port.
+ * A single register holds USB port-related information such as USB reset,
+ * enable, suspend, resume, connect status, and test mode for each port. The
+ * R_SS_WC bits in this register can trigger an interrupt to the application
+ * through the Host Port Interrupt bit of the Core Interrupt register
+ * (GINTSTS.PrtInt). On a Port Interrupt, the application must read this
+ * register and clear the bit that caused the interrupt. For the R_SS_WC bits,
+ * the application must write a 1 to the bit to clear the interrupt.
+ */
+union cvmx_usbcx_hprt {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_hprt_s
+ * @prtspd: Port Speed (PrtSpd)
+ * Indicates the speed of the device attached to this port.
+ * * 2'b00: High speed
+ * * 2'b01: Full speed
+ * * 2'b10: Low speed
+ * * 2'b11: Reserved
+ * @prttstctl: Port Test Control (PrtTstCtl)
+ * The application writes a nonzero value to this field to put
+ * the port into a Test mode, and the corresponding pattern is
+ * signaled on the port.
+ * * 4'b0000: Test mode disabled
+ * * 4'b0001: Test_J mode
+ * * 4'b0010: Test_K mode
+ * * 4'b0011: Test_SE0_NAK mode
+ * * 4'b0100: Test_Packet mode
+ * * 4'b0101: Test_Force_Enable
+ * * Others: Reserved
+ * PrtSpd must be zero (i.e. the interface must be in high-speed
+ * mode) to use the PrtTstCtl test modes.
+ * @prtpwr: Port Power (PrtPwr)
+ * The application uses this field to control power to this port,
+ * and the core clears this bit on an overcurrent condition.
+ * * 1'b0: Power off
+ * * 1'b1: Power on
+ * @prtlnsts: Port Line Status (PrtLnSts)
+ * Indicates the current logic level USB data lines
+ * * Bit [10]: Logic level of D-
+ * * Bit [11]: Logic level of D+
+ * @prtrst: Port Reset (PrtRst)
+ * When the application sets this bit, a reset sequence is
+ * started on this port. The application must time the reset
+ * period and clear this bit after the reset sequence is
+ * complete.
+ * * 1'b0: Port not in reset
+ * * 1'b1: Port in reset
+ * The application must leave this bit set for at least a
+ * minimum duration mentioned below to start a reset on the
+ * port. The application can leave it set for another 10 ms in
+ * addition to the required minimum duration, before clearing
+ * the bit, even though there is no maximum limit set by the
+ * USB standard.
+ * * High speed: 50 ms
+ * * Full speed/Low speed: 10 ms
+ * @prtsusp: Port Suspend (PrtSusp)
+ * The application sets this bit to put this port in Suspend
+ * mode. The core only stops sending SOFs when this is set.
+ * To stop the PHY clock, the application must set the Port
+ * Clock Stop bit, which will assert the suspend input pin of
+ * the PHY.
+ * The read value of this bit reflects the current suspend
+ * status of the port. This bit is cleared by the core after a
+ * remote wakeup signal is detected or the application sets
+ * the Port Reset bit or Port Resume bit in this register or the
+ * Resume/Remote Wakeup Detected Interrupt bit or
+ * Disconnect Detected Interrupt bit in the Core Interrupt
+ * register (GINTSTS.WkUpInt or GINTSTS.DisconnInt,
+ * respectively).
+ * * 1'b0: Port not in Suspend mode
+ * * 1'b1: Port in Suspend mode
+ * @prtres: Port Resume (PrtRes)
+ * The application sets this bit to drive resume signaling on
+ * the port. The core continues to drive the resume signal
+ * until the application clears this bit.
+ * If the core detects a USB remote wakeup sequence, as
+ * indicated by the Port Resume/Remote Wakeup Detected
+ * Interrupt bit of the Core Interrupt register
+ * (GINTSTS.WkUpInt), the core starts driving resume
+ * signaling without application intervention and clears this bit
+ * when it detects a disconnect condition. The read value of
+ * this bit indicates whether the core is currently driving
+ * resume signaling.
+ * * 1'b0: No resume driven
+ * * 1'b1: Resume driven
+ * @prtovrcurrchng: Port Overcurrent Change (PrtOvrCurrChng)
+ * The core sets this bit when the status of the Port
+ * Overcurrent Active bit (bit 4) in this register changes.
+ * @prtovrcurract: Port Overcurrent Active (PrtOvrCurrAct)
+ * Indicates the overcurrent condition of the port.
+ * * 1'b0: No overcurrent condition
+ * * 1'b1: Overcurrent condition
+ * @prtenchng: Port Enable/Disable Change (PrtEnChng)
+ * The core sets this bit when the status of the Port Enable bit
+ * [2] of this register changes.
+ * @prtena: Port Enable (PrtEna)
+ * A port is enabled only by the core after a reset sequence,
+ * and is disabled by an overcurrent condition, a disconnect
+ * condition, or by the application clearing this bit. The
+ * application cannot set this bit by a register write. It can only
+ * clear it to disable the port. This bit does not trigger any
+ * interrupt to the application.
+ * * 1'b0: Port disabled
+ * * 1'b1: Port enabled
+ * @prtconndet: Port Connect Detected (PrtConnDet)
+ * The core sets this bit when a device connection is detected
+ * to trigger an interrupt to the application using the Host Port
+ * Interrupt bit of the Core Interrupt register (GINTSTS.PrtInt).
+ * The application must write a 1 to this bit to clear the
+ * interrupt.
+ * @prtconnsts: Port Connect Status (PrtConnSts)
+ * * 0: No device is attached to the port.
+ * * 1: A device is attached to the port.
+ */
+ struct cvmx_usbcx_hprt_s {
+ __BITFIELD_FIELD(u32 reserved_19_31 : 13,
+ __BITFIELD_FIELD(u32 prtspd : 2,
+ __BITFIELD_FIELD(u32 prttstctl : 4,
+ __BITFIELD_FIELD(u32 prtpwr : 1,
+ __BITFIELD_FIELD(u32 prtlnsts : 2,
+ __BITFIELD_FIELD(u32 reserved_9_9 : 1,
+ __BITFIELD_FIELD(u32 prtrst : 1,
+ __BITFIELD_FIELD(u32 prtsusp : 1,
+ __BITFIELD_FIELD(u32 prtres : 1,
+ __BITFIELD_FIELD(u32 prtovrcurrchng : 1,
+ __BITFIELD_FIELD(u32 prtovrcurract : 1,
+ __BITFIELD_FIELD(u32 prtenchng : 1,
+ __BITFIELD_FIELD(u32 prtena : 1,
+ __BITFIELD_FIELD(u32 prtconndet : 1,
+ __BITFIELD_FIELD(u32 prtconnsts : 1,
+ ;)))))))))))))))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_hptxfsiz
+ *
+ * Host Periodic Transmit FIFO Size Register (HPTXFSIZ)
+ *
+ * This register holds the size and the memory start address of the Periodic
+ * TxFIFO, as shown in Figures 310 and 311.
+ */
+union cvmx_usbcx_hptxfsiz {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_hptxfsiz_s
+ * @ptxfsize: Host Periodic TxFIFO Depth (PTxFSize)
+ * This value is in terms of 32-bit words.
+ * * Minimum value is 16
+ * * Maximum value is 32768
+ * @ptxfstaddr: Host Periodic TxFIFO Start Address (PTxFStAddr)
+ */
+ struct cvmx_usbcx_hptxfsiz_s {
+ __BITFIELD_FIELD(u32 ptxfsize : 16,
+ __BITFIELD_FIELD(u32 ptxfstaddr : 16,
+ ;))
+ } s;
+};
+
+/**
+ * cvmx_usbc#_hptxsts
+ *
+ * Host Periodic Transmit FIFO/Queue Status Register (HPTXSTS)
+ *
+ * This read-only register contains the free space information for the Periodic
+ * TxFIFO and the Periodic Transmit Request Queue
+ */
+union cvmx_usbcx_hptxsts {
+ u32 u32;
+ /**
+ * struct cvmx_usbcx_hptxsts_s
+ * @ptxqtop: Top of the Periodic Transmit Request Queue (PTxQTop)
+ * This indicates the entry in the Periodic Tx Request Queue that
+ * is currently being processes by the MAC.
+ * This register is used for debugging.
+ * * Bit [31]: Odd/Even (micro)frame
+ * - 1'b0: send in even (micro)frame
+ * - 1'b1: send in odd (micro)frame
+ * * Bits [30:27]: Channel/endpoint number
+ * * Bits [26:25]: Type
+ * - 2'b00: IN/OUT
+ * - 2'b01: Zero-length packet
+ * - 2'b10: CSPLIT
+ * - 2'b11: Disable channel command
+ * * Bit [24]: Terminate (last entry for the selected
+ * channel/endpoint)
+ * @ptxqspcavail: Periodic Transmit Request Queue Space Available
+ * (PTxQSpcAvail)
+ * Indicates the number of free locations available to be written
+ * in the Periodic Transmit Request Queue. This queue holds both
+ * IN and OUT requests.
+ * * 8'h0: Periodic Transmit Request Queue is full
+ * * 8'h1: 1 location available
+ * * 8'h2: 2 locations available
+ * * n: n locations available (0..8)
+ * * Others: Reserved
+ * @ptxfspcavail: Periodic Transmit Data FIFO Space Available
+ * (PTxFSpcAvail)
+ * Indicates the number of free locations available to be written
+ * to in the Periodic TxFIFO.
+ * Values are in terms of 32-bit words
+ * * 16'h0: Periodic TxFIFO is full
+ * * 16'h1: 1 word available
+ * * 16'h2: 2 words available
+ * * 16'hn: n words available (where 0..32768)
+ * * 16'h8000: 32768 words available
+ * * Others: Reserved
+ */
+ struct cvmx_usbcx_hptxsts_s {
+ __BITFIELD_FIELD(u32 ptxqtop : 8,
+ __BITFIELD_FIELD(u32 ptxqspcavail : 8,
+ __BITFIELD_FIELD(u32 ptxfspcavail : 16,
+ ;)))
+ } s;
+};
+
+/**
+ * cvmx_usbn#_clk_ctl
+ *
+ * USBN_CLK_CTL = USBN's Clock Control
+ *
+ * This register is used to control the frequency of the hclk and the
+ * hreset and phy_rst signals.
+ */
+union cvmx_usbnx_clk_ctl {
+ u64 u64;
+ /**
+ * struct cvmx_usbnx_clk_ctl_s
+ * @divide2: The 'hclk' used by the USB subsystem is derived
+ * from the eclk.
+ * Also see the field DIVIDE. DIVIDE2<1> must currently
+ * be zero because it is not implemented, so the maximum
+ * ratio of eclk/hclk is currently 16.
+ * The actual divide number for hclk is:
+ * (DIVIDE2 + 1) * (DIVIDE + 1)
+ * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to
+ * generate the hclk in the USB Subsystem is held
+ * in reset. This bit must be set to '0' before
+ * changing the value os DIVIDE in this register.
+ * The reset to the HCLK_DIVIDERis also asserted
+ * when core reset is asserted.
+ * @p_x_on: Force USB-PHY on during suspend.
+ * '1' USB-PHY XO block is powered-down during
+ * suspend.
+ * '0' USB-PHY XO block is powered-up during
+ * suspend.
+ * The value of this field must be set while POR is
+ * active.
+ * @p_rtype: PHY reference clock type
+ * On CN50XX/CN52XX/CN56XX the values are:
+ * '0' The USB-PHY uses a 12MHz crystal as a clock source
+ * at the USB_XO and USB_XI pins.
+ * '1' Reserved.
+ * '2' The USB_PHY uses 12/24/48MHz 2.5V board clock at the
+ * USB_XO pin. USB_XI should be tied to ground in this
+ * case.
+ * '3' Reserved.
+ * On CN3xxx bits 14 and 15 are p_xenbn and p_rclk and values are:
+ * '0' Reserved.
+ * '1' Reserved.
+ * '2' The PHY PLL uses the XO block output as a reference.
+ * The XO block uses an external clock supplied on the
+ * XO pin. USB_XI should be tied to ground for this
+ * usage.
+ * '3' The XO block uses the clock from a crystal.
+ * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to
+ * remain powered in Suspend Mode.
+ * '1' The USB-PHY XO Bias, Bandgap and PLL are
+ * powered down in suspend mode.
+ * The value of this field must be set while POR is
+ * active.
+ * @p_c_sel: Phy clock speed select.
+ * Selects the reference clock / crystal frequency.
+ * '11': Reserved
+ * '10': 48 MHz (reserved when a crystal is used)
+ * '01': 24 MHz (reserved when a crystal is used)
+ * '00': 12 MHz
+ * The value of this field must be set while POR is
+ * active.
+ * NOTE: if a crystal is used as a reference clock,
+ * this field must be set to 12 MHz.
+ * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV.
+ * @sd_mode: Scaledown mode for the USBC. Control timing events
+ * in the USBC, for normal operation this must be '0'.
+ * @s_bist: Starts bist on the hclk memories, during the '0'
+ * to '1' transition.
+ * @por: Power On Reset for the PHY.
+ * Resets all the PHYS registers and state machines.
+ * @enable: When '1' allows the generation of the hclk. When
+ * '0' the hclk will not be generated. SEE DIVIDE
+ * field of this register.
+ * @prst: When this field is '0' the reset associated with
+ * the phy_clk functionality in the USB Subsystem is
+ * help in reset. This bit should not be set to '1'
+ * until the time it takes 6 clocks (hclk or phy_clk,
+ * whichever is slower) has passed. Under normal
+ * operation once this bit is set to '1' it should not
+ * be set to '0'.
+ * @hrst: When this field is '0' the reset associated with
+ * the hclk functioanlity in the USB Subsystem is
+ * held in reset.This bit should not be set to '1'
+ * until 12ms after phy_clk is stable. Under normal
+ * operation, once this bit is set to '1' it should
+ * not be set to '0'.
+ * @divide: The frequency of 'hclk' used by the USB subsystem
+ * is the eclk frequency divided by the value of
+ * (DIVIDE2 + 1) * (DIVIDE + 1), also see the field
+ * DIVIDE2 of this register.
+ * The hclk frequency should be less than 125Mhz.
+ * After writing a value to this field the SW should
+ * read the field for the value written.
+ * The ENABLE field of this register should not be set
+ * until AFTER this field is set and then read.
+ */
+ struct cvmx_usbnx_clk_ctl_s {
+ __BITFIELD_FIELD(u64 reserved_20_63 : 44,
+ __BITFIELD_FIELD(u64 divide2 : 2,
+ __BITFIELD_FIELD(u64 hclk_rst : 1,
+ __BITFIELD_FIELD(u64 p_x_on : 1,
+ __BITFIELD_FIELD(u64 p_rtype : 2,
+ __BITFIELD_FIELD(u64 p_com_on : 1,
+ __BITFIELD_FIELD(u64 p_c_sel : 2,
+ __BITFIELD_FIELD(u64 cdiv_byp : 1,
+ __BITFIELD_FIELD(u64 sd_mode : 2,
+ __BITFIELD_FIELD(u64 s_bist : 1,
+ __BITFIELD_FIELD(u64 por : 1,
+ __BITFIELD_FIELD(u64 enable : 1,
+ __BITFIELD_FIELD(u64 prst : 1,
+ __BITFIELD_FIELD(u64 hrst : 1,
+ __BITFIELD_FIELD(u64 divide : 3,
+ ;)))))))))))))))
+ } s;
+};
+
+/**
+ * cvmx_usbn#_usbp_ctl_status
+ *
+ * USBN_USBP_CTL_STATUS = USBP Control And Status Register
+ *
+ * Contains general control and status information for the USBN block.
+ */
+union cvmx_usbnx_usbp_ctl_status {
+ u64 u64;
+ /**
+ * struct cvmx_usbnx_usbp_ctl_status_s
+ * @txrisetune: HS Transmitter Rise/Fall Time Adjustment
+ * @txvreftune: HS DC Voltage Level Adjustment
+ * @txfslstune: FS/LS Source Impedance Adjustment
+ * @txhsxvtune: Transmitter High-Speed Crossover Adjustment
+ * @sqrxtune: Squelch Threshold Adjustment
+ * @compdistune: Disconnect Threshold Adjustment
+ * @otgtune: VBUS Valid Threshold Adjustment
+ * @otgdisable: OTG Block Disable
+ * @portreset: Per_Port Reset
+ * @drvvbus: Drive VBUS
+ * @lsbist: Low-Speed BIST Enable.
+ * @fsbist: Full-Speed BIST Enable.
+ * @hsbist: High-Speed BIST Enable.
+ * @bist_done: PHY Bist Done.
+ * Asserted at the end of the PHY BIST sequence.
+ * @bist_err: PHY Bist Error.
+ * Indicates an internal error was detected during
+ * the BIST sequence.
+ * @tdata_out: PHY Test Data Out.
+ * Presents either internally generated signals or
+ * test register contents, based upon the value of
+ * test_data_out_sel.
+ * @siddq: Drives the USBP (USB-PHY) SIDDQ input.
+ * Normally should be set to zero.
+ * When customers have no intent to use USB PHY
+ * interface, they should:
+ * - still provide 3.3V to USB_VDD33, and
+ * - tie USB_REXT to 3.3V supply, and
+ * - set USBN*_USBP_CTL_STATUS[SIDDQ]=1
+ * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable
+ * @dma_bmode: When set to 1 the L2C DMA address will be updated
+ * with byte-counts between packets. When set to 0
+ * the L2C DMA address is incremented to the next
+ * 4-byte aligned address after adding byte-count.
+ * @usbc_end: Bigendian input to the USB Core. This should be
+ * set to '0' for operation.
+ * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
+ * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
+ * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
+ * This signal enables the pull-down resistance on
+ * the D+ line. '1' pull down-resistance is connected
+ * to D+/ '0' pull down resistance is not connected
+ * to D+. When an A/B device is acting as a host
+ * (downstream-facing port), dp_pulldown and
+ * dm_pulldown are enabled. This must not toggle
+ * during normal operation.
+ * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
+ * This signal enables the pull-down resistance on
+ * the D- line. '1' pull down-resistance is connected
+ * to D-. '0' pull down resistance is not connected
+ * to D-. When an A/B device is acting as a host
+ * (downstream-facing port), dp_pulldown and
+ * dm_pulldown are enabled. This must not toggle
+ * during normal operation.
+ * @hst_mode: When '0' the USB is acting as HOST, when '1'
+ * USB is acting as device. This field needs to be
+ * set while the USB is in reset.
+ * @tuning: Transmitter Tuning for High-Speed Operation.
+ * Tunes the current supply and rise/fall output
+ * times for high-speed operation.
+ * [20:19] == 11: Current supply increased
+ * approximately 9%
+ * [20:19] == 10: Current supply increased
+ * approximately 4.5%
+ * [20:19] == 01: Design default.
+ * [20:19] == 00: Current supply decreased
+ * approximately 4.5%
+ * [22:21] == 11: Rise and fall times are increased.
+ * [22:21] == 10: Design default.
+ * [22:21] == 01: Rise and fall times are decreased.
+ * [22:21] == 00: Rise and fall times are decreased
+ * further as compared to the 01 setting.
+ * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
+ * Enables or disables bit stuffing on data[15:8]
+ * when bit-stuffing is enabled.
+ * @tx_bs_en: Transmit Bit Stuffing on [7:0].
+ * Enables or disables bit stuffing on data[7:0]
+ * when bit-stuffing is enabled.
+ * @loop_enb: PHY Loopback Test Enable.
+ * '1': During data transmission the receive is
+ * enabled.
+ * '0': During data transmission the receive is
+ * disabled.
+ * Must be '0' for normal operation.
+ * @vtest_enb: Analog Test Pin Enable.
+ * '1' The PHY's analog_test pin is enabled for the
+ * input and output of applicable analog test signals.
+ * '0' THe analog_test pin is disabled.
+ * @bist_enb: Built-In Self Test Enable.
+ * Used to activate BIST in the PHY.
+ * @tdata_sel: Test Data Out Select.
+ * '1' test_data_out[3:0] (PHY) register contents
+ * are output. '0' internally generated signals are
+ * output.
+ * @taddr_in: Mode Address for Test Interface.
+ * Specifies the register address for writing to or
+ * reading from the PHY test interface register.
+ * @tdata_in: Internal Testing Register Input Data and Select
+ * This is a test bus. Data is present on [3:0],
+ * and its corresponding select (enable) is present
+ * on bits [7:4].
+ * @ate_reset: Reset input from automatic test equipment.
+ * This is a test signal. When the USB Core is
+ * powered up (not in Susned Mode), an automatic
+ * tester can use this to disable phy_clock and
+ * free_clk, then re-enable them with an aligned
+ * phase.
+ * '1': The phy_clk and free_clk outputs are
+ * disabled. "0": The phy_clock and free_clk outputs
+ * are available within a specific period after the
+ * de-assertion.
+ */
+ struct cvmx_usbnx_usbp_ctl_status_s {
+ __BITFIELD_FIELD(u64 txrisetune : 1,
+ __BITFIELD_FIELD(u64 txvreftune : 4,
+ __BITFIELD_FIELD(u64 txfslstune : 4,
+ __BITFIELD_FIELD(u64 txhsxvtune : 2,
+ __BITFIELD_FIELD(u64 sqrxtune : 3,
+ __BITFIELD_FIELD(u64 compdistune : 3,
+ __BITFIELD_FIELD(u64 otgtune : 3,
+ __BITFIELD_FIELD(u64 otgdisable : 1,
+ __BITFIELD_FIELD(u64 portreset : 1,
+ __BITFIELD_FIELD(u64 drvvbus : 1,
+ __BITFIELD_FIELD(u64 lsbist : 1,
+ __BITFIELD_FIELD(u64 fsbist : 1,
+ __BITFIELD_FIELD(u64 hsbist : 1,
+ __BITFIELD_FIELD(u64 bist_done : 1,
+ __BITFIELD_FIELD(u64 bist_err : 1,
+ __BITFIELD_FIELD(u64 tdata_out : 4,
+ __BITFIELD_FIELD(u64 siddq : 1,
+ __BITFIELD_FIELD(u64 txpreemphasistune : 1,
+ __BITFIELD_FIELD(u64 dma_bmode : 1,
+ __BITFIELD_FIELD(u64 usbc_end : 1,
+ __BITFIELD_FIELD(u64 usbp_bist : 1,
+ __BITFIELD_FIELD(u64 tclk : 1,
+ __BITFIELD_FIELD(u64 dp_pulld : 1,
+ __BITFIELD_FIELD(u64 dm_pulld : 1,
+ __BITFIELD_FIELD(u64 hst_mode : 1,
+ __BITFIELD_FIELD(u64 tuning : 4,
+ __BITFIELD_FIELD(u64 tx_bs_enh : 1,
+ __BITFIELD_FIELD(u64 tx_bs_en : 1,
+ __BITFIELD_FIELD(u64 loop_enb : 1,
+ __BITFIELD_FIELD(u64 vtest_enb : 1,
+ __BITFIELD_FIELD(u64 bist_enb : 1,
+ __BITFIELD_FIELD(u64 tdata_sel : 1,
+ __BITFIELD_FIELD(u64 taddr_in : 4,
+ __BITFIELD_FIELD(u64 tdata_in : 8,
+ __BITFIELD_FIELD(u64 ate_reset : 1,
+ ;)))))))))))))))))))))))))))))))))))
+ } s;
+};
+
+#endif /* __OCTEON_HCD_H__ */