diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/usb/host/ohci-hcd.c | 1367 |
1 files changed, 1367 insertions, 0 deletions
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c new file mode 100644 index 000000000..0457dd9f6 --- /dev/null +++ b/drivers/usb/host/ohci-hcd.c @@ -0,0 +1,1367 @@ +// SPDX-License-Identifier: GPL-1.0+ +/* + * Open Host Controller Interface (OHCI) driver for USB. + * + * Maintainer: Alan Stern <stern@rowland.harvard.edu> + * + * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> + * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net> + * + * [ Initialisation is based on Linus' ] + * [ uhci code and gregs ohci fragments ] + * [ (C) Copyright 1999 Linus Torvalds ] + * [ (C) Copyright 1999 Gregory P. Smith] + * + * + * OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller + * interfaces (though some non-x86 Intel chips use it). It supports + * smarter hardware than UHCI. A download link for the spec available + * through the https://www.usb.org website. + * + * This file is licenced under the GPL. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/usb.h> +#include <linux/usb/otg.h> +#include <linux/usb/hcd.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/workqueue.h> +#include <linux/debugfs.h> +#include <linux/genalloc.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/unaligned.h> +#include <asm/byteorder.h> + + +#define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell" +#define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver" + +/*-------------------------------------------------------------------------*/ + +/* For initializing controller (mask in an HCFS mode too) */ +#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR +#define OHCI_INTR_INIT \ + (OHCI_INTR_MIE | OHCI_INTR_RHSC | OHCI_INTR_UE \ + | OHCI_INTR_RD | OHCI_INTR_WDH) + +#ifdef __hppa__ +/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */ +#define IR_DISABLE +#endif + +#ifdef CONFIG_ARCH_OMAP +/* OMAP doesn't support IR (no SMM; not needed) */ +#define IR_DISABLE +#endif + +/*-------------------------------------------------------------------------*/ + +static const char hcd_name [] = "ohci_hcd"; + +#define STATECHANGE_DELAY msecs_to_jiffies(300) +#define IO_WATCHDOG_DELAY msecs_to_jiffies(275) +#define IO_WATCHDOG_OFF 0xffffff00 + +#include "ohci.h" +#include "pci-quirks.h" + +static void ohci_dump(struct ohci_hcd *ohci); +static void ohci_stop(struct usb_hcd *hcd); +static void io_watchdog_func(struct timer_list *t); + +#include "ohci-hub.c" +#include "ohci-dbg.c" +#include "ohci-mem.c" +#include "ohci-q.c" + + +/* + * On architectures with edge-triggered interrupts we must never return + * IRQ_NONE. + */ +#if defined(CONFIG_SA1111) /* ... or other edge-triggered systems */ +#define IRQ_NOTMINE IRQ_HANDLED +#else +#define IRQ_NOTMINE IRQ_NONE +#endif + + +/* Some boards misreport power switching/overcurrent */ +static bool distrust_firmware; +module_param (distrust_firmware, bool, 0); +MODULE_PARM_DESC (distrust_firmware, + "true to distrust firmware power/overcurrent setup"); + +/* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */ +static bool no_handshake; +module_param (no_handshake, bool, 0); +MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake"); + +/*-------------------------------------------------------------------------*/ + +static int number_of_tds(struct urb *urb) +{ + int len, i, num, this_sg_len; + struct scatterlist *sg; + + len = urb->transfer_buffer_length; + i = urb->num_mapped_sgs; + + if (len > 0 && i > 0) { /* Scatter-gather transfer */ + num = 0; + sg = urb->sg; + for (;;) { + this_sg_len = min_t(int, sg_dma_len(sg), len); + num += DIV_ROUND_UP(this_sg_len, 4096); + len -= this_sg_len; + if (--i <= 0 || len <= 0) + break; + sg = sg_next(sg); + } + + } else { /* Non-SG transfer */ + /* one TD for every 4096 Bytes (could be up to 8K) */ + num = DIV_ROUND_UP(len, 4096); + } + return num; +} + +/* + * queue up an urb for anything except the root hub + */ +static int ohci_urb_enqueue ( + struct usb_hcd *hcd, + struct urb *urb, + gfp_t mem_flags +) { + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + struct ed *ed; + urb_priv_t *urb_priv; + unsigned int pipe = urb->pipe; + int i, size = 0; + unsigned long flags; + int retval = 0; + + /* every endpoint has a ed, locate and maybe (re)initialize it */ + ed = ed_get(ohci, urb->ep, urb->dev, pipe, urb->interval); + if (! ed) + return -ENOMEM; + + /* for the private part of the URB we need the number of TDs (size) */ + switch (ed->type) { + case PIPE_CONTROL: + /* td_submit_urb() doesn't yet handle these */ + if (urb->transfer_buffer_length > 4096) + return -EMSGSIZE; + + /* 1 TD for setup, 1 for ACK, plus ... */ + size = 2; + fallthrough; + // case PIPE_INTERRUPT: + // case PIPE_BULK: + default: + size += number_of_tds(urb); + /* maybe a zero-length packet to wrap it up */ + if (size == 0) + size++; + else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0 + && (urb->transfer_buffer_length + % usb_maxpacket(urb->dev, pipe)) == 0) + size++; + break; + case PIPE_ISOCHRONOUS: /* number of packets from URB */ + size = urb->number_of_packets; + break; + } + + /* allocate the private part of the URB */ + urb_priv = kzalloc(struct_size(urb_priv, td, size), mem_flags); + if (!urb_priv) + return -ENOMEM; + INIT_LIST_HEAD (&urb_priv->pending); + urb_priv->length = size; + urb_priv->ed = ed; + + /* allocate the TDs (deferring hash chain updates) */ + for (i = 0; i < size; i++) { + urb_priv->td [i] = td_alloc (ohci, mem_flags); + if (!urb_priv->td [i]) { + urb_priv->length = i; + urb_free_priv (ohci, urb_priv); + return -ENOMEM; + } + } + + spin_lock_irqsave (&ohci->lock, flags); + + /* don't submit to a dead HC */ + if (!HCD_HW_ACCESSIBLE(hcd)) { + retval = -ENODEV; + goto fail; + } + if (ohci->rh_state != OHCI_RH_RUNNING) { + retval = -ENODEV; + goto fail; + } + retval = usb_hcd_link_urb_to_ep(hcd, urb); + if (retval) + goto fail; + + /* schedule the ed if needed */ + if (ed->state == ED_IDLE) { + retval = ed_schedule (ohci, ed); + if (retval < 0) { + usb_hcd_unlink_urb_from_ep(hcd, urb); + goto fail; + } + + /* Start up the I/O watchdog timer, if it's not running */ + if (ohci->prev_frame_no == IO_WATCHDOG_OFF && + list_empty(&ohci->eds_in_use) && + !(ohci->flags & OHCI_QUIRK_QEMU)) { + ohci->prev_frame_no = ohci_frame_no(ohci); + mod_timer(&ohci->io_watchdog, + jiffies + IO_WATCHDOG_DELAY); + } + list_add(&ed->in_use_list, &ohci->eds_in_use); + + if (ed->type == PIPE_ISOCHRONOUS) { + u16 frame = ohci_frame_no(ohci); + + /* delay a few frames before the first TD */ + frame += max_t (u16, 8, ed->interval); + frame &= ~(ed->interval - 1); + frame |= ed->branch; + urb->start_frame = frame; + ed->last_iso = frame + ed->interval * (size - 1); + } + } else if (ed->type == PIPE_ISOCHRONOUS) { + u16 next = ohci_frame_no(ohci) + 1; + u16 frame = ed->last_iso + ed->interval; + u16 length = ed->interval * (size - 1); + + /* Behind the scheduling threshold? */ + if (unlikely(tick_before(frame, next))) { + + /* URB_ISO_ASAP: Round up to the first available slot */ + if (urb->transfer_flags & URB_ISO_ASAP) { + frame += (next - frame + ed->interval - 1) & + -ed->interval; + + /* + * Not ASAP: Use the next slot in the stream, + * no matter what. + */ + } else { + /* + * Some OHCI hardware doesn't handle late TDs + * correctly. After retiring them it proceeds + * to the next ED instead of the next TD. + * Therefore we have to omit the late TDs + * entirely. + */ + urb_priv->td_cnt = DIV_ROUND_UP( + (u16) (next - frame), + ed->interval); + if (urb_priv->td_cnt >= urb_priv->length) { + ++urb_priv->td_cnt; /* Mark it */ + ohci_dbg(ohci, "iso underrun %p (%u+%u < %u)\n", + urb, frame, length, + next); + } + } + } + urb->start_frame = frame; + ed->last_iso = frame + length; + } + + /* fill the TDs and link them to the ed; and + * enable that part of the schedule, if needed + * and update count of queued periodic urbs + */ + urb->hcpriv = urb_priv; + td_submit_urb (ohci, urb); + +fail: + if (retval) + urb_free_priv (ohci, urb_priv); + spin_unlock_irqrestore (&ohci->lock, flags); + return retval; +} + +/* + * decouple the URB from the HC queues (TDs, urb_priv). + * reporting is always done + * asynchronously, and we might be dealing with an urb that's + * partially transferred, or an ED with other urbs being unlinked. + */ +static int ohci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + unsigned long flags; + int rc; + urb_priv_t *urb_priv; + + spin_lock_irqsave (&ohci->lock, flags); + rc = usb_hcd_check_unlink_urb(hcd, urb, status); + if (rc == 0) { + + /* Unless an IRQ completed the unlink while it was being + * handed to us, flag it for unlink and giveback, and force + * some upcoming INTR_SF to call finish_unlinks() + */ + urb_priv = urb->hcpriv; + if (urb_priv->ed->state == ED_OPER) + start_ed_unlink(ohci, urb_priv->ed); + + if (ohci->rh_state != OHCI_RH_RUNNING) { + /* With HC dead, we can clean up right away */ + ohci_work(ohci); + } + } + spin_unlock_irqrestore (&ohci->lock, flags); + return rc; +} + +/*-------------------------------------------------------------------------*/ + +/* frees config/altsetting state for endpoints, + * including ED memory, dummy TD, and bulk/intr data toggle + */ + +static void +ohci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + unsigned long flags; + struct ed *ed = ep->hcpriv; + unsigned limit = 1000; + + /* ASSERT: any requests/urbs are being unlinked */ + /* ASSERT: nobody can be submitting urbs for this any more */ + + if (!ed) + return; + +rescan: + spin_lock_irqsave (&ohci->lock, flags); + + if (ohci->rh_state != OHCI_RH_RUNNING) { +sanitize: + ed->state = ED_IDLE; + ohci_work(ohci); + } + + switch (ed->state) { + case ED_UNLINK: /* wait for hw to finish? */ + /* major IRQ delivery trouble loses INTR_SF too... */ + if (limit-- == 0) { + ohci_warn(ohci, "ED unlink timeout\n"); + goto sanitize; + } + spin_unlock_irqrestore (&ohci->lock, flags); + schedule_timeout_uninterruptible(1); + goto rescan; + case ED_IDLE: /* fully unlinked */ + if (list_empty (&ed->td_list)) { + td_free (ohci, ed->dummy); + ed_free (ohci, ed); + break; + } + fallthrough; + default: + /* caller was supposed to have unlinked any requests; + * that's not our job. can't recover; must leak ed. + */ + ohci_err (ohci, "leak ed %p (#%02x) state %d%s\n", + ed, ep->desc.bEndpointAddress, ed->state, + list_empty (&ed->td_list) ? "" : " (has tds)"); + td_free (ohci, ed->dummy); + break; + } + ep->hcpriv = NULL; + spin_unlock_irqrestore (&ohci->lock, flags); +} + +static int ohci_get_frame (struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + + return ohci_frame_no(ohci); +} + +static void ohci_usb_reset (struct ohci_hcd *ohci) +{ + ohci->hc_control = ohci_readl (ohci, &ohci->regs->control); + ohci->hc_control &= OHCI_CTRL_RWC; + ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); + ohci->rh_state = OHCI_RH_HALTED; +} + +/* ohci_shutdown forcibly disables IRQs and DMA, helping kexec and + * other cases where the next software may expect clean state from the + * "firmware". this is bus-neutral, unlike shutdown() methods. + */ +static void _ohci_shutdown(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci; + + ohci = hcd_to_ohci (hcd); + ohci_writel(ohci, (u32) ~0, &ohci->regs->intrdisable); + + /* Software reset, after which the controller goes into SUSPEND */ + ohci_writel(ohci, OHCI_HCR, &ohci->regs->cmdstatus); + ohci_readl(ohci, &ohci->regs->cmdstatus); /* flush the writes */ + udelay(10); + + ohci_writel(ohci, ohci->fminterval, &ohci->regs->fminterval); + ohci->rh_state = OHCI_RH_HALTED; +} + +static void ohci_shutdown(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + unsigned long flags; + + spin_lock_irqsave(&ohci->lock, flags); + _ohci_shutdown(hcd); + spin_unlock_irqrestore(&ohci->lock, flags); +} + +/*-------------------------------------------------------------------------* + * HC functions + *-------------------------------------------------------------------------*/ + +/* init memory, and kick BIOS/SMM off */ + +static int ohci_init (struct ohci_hcd *ohci) +{ + int ret; + struct usb_hcd *hcd = ohci_to_hcd(ohci); + + /* Accept arbitrarily long scatter-gather lists */ + if (!hcd->localmem_pool) + hcd->self.sg_tablesize = ~0; + + if (distrust_firmware) + ohci->flags |= OHCI_QUIRK_HUB_POWER; + + ohci->rh_state = OHCI_RH_HALTED; + ohci->regs = hcd->regs; + + /* REVISIT this BIOS handshake is now moved into PCI "quirks", and + * was never needed for most non-PCI systems ... remove the code? + */ + +#ifndef IR_DISABLE + /* SMM owns the HC? not for long! */ + if (!no_handshake && ohci_readl (ohci, + &ohci->regs->control) & OHCI_CTRL_IR) { + u32 temp; + + ohci_dbg (ohci, "USB HC TakeOver from BIOS/SMM\n"); + + /* this timeout is arbitrary. we make it long, so systems + * depending on usb keyboards may be usable even if the + * BIOS/SMM code seems pretty broken. + */ + temp = 500; /* arbitrary: five seconds */ + + ohci_writel (ohci, OHCI_INTR_OC, &ohci->regs->intrenable); + ohci_writel (ohci, OHCI_OCR, &ohci->regs->cmdstatus); + while (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_IR) { + msleep (10); + if (--temp == 0) { + ohci_err (ohci, "USB HC takeover failed!" + " (BIOS/SMM bug)\n"); + return -EBUSY; + } + } + ohci_usb_reset (ohci); + } +#endif + + /* Disable HC interrupts */ + ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); + + /* flush the writes, and save key bits like RWC */ + if (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_RWC) + ohci->hc_control |= OHCI_CTRL_RWC; + + /* Read the number of ports unless overridden */ + if (ohci->num_ports == 0) + ohci->num_ports = roothub_a(ohci) & RH_A_NDP; + + if (ohci->hcca) + return 0; + + timer_setup(&ohci->io_watchdog, io_watchdog_func, 0); + ohci->prev_frame_no = IO_WATCHDOG_OFF; + + if (hcd->localmem_pool) + ohci->hcca = gen_pool_dma_alloc_align(hcd->localmem_pool, + sizeof(*ohci->hcca), + &ohci->hcca_dma, 256); + else + ohci->hcca = dma_alloc_coherent(hcd->self.controller, + sizeof(*ohci->hcca), + &ohci->hcca_dma, + GFP_KERNEL); + if (!ohci->hcca) + return -ENOMEM; + + if ((ret = ohci_mem_init (ohci)) < 0) + ohci_stop (hcd); + else { + create_debug_files (ohci); + } + + return ret; +} + +/*-------------------------------------------------------------------------*/ + +/* Start an OHCI controller, set the BUS operational + * resets USB and controller + * enable interrupts + */ +static int ohci_run (struct ohci_hcd *ohci) +{ + u32 mask, val; + int first = ohci->fminterval == 0; + struct usb_hcd *hcd = ohci_to_hcd(ohci); + + ohci->rh_state = OHCI_RH_HALTED; + + /* boot firmware should have set this up (5.1.1.3.1) */ + if (first) { + + val = ohci_readl (ohci, &ohci->regs->fminterval); + ohci->fminterval = val & 0x3fff; + if (ohci->fminterval != FI) + ohci_dbg (ohci, "fminterval delta %d\n", + ohci->fminterval - FI); + ohci->fminterval |= FSMP (ohci->fminterval) << 16; + /* also: power/overcurrent flags in roothub.a */ + } + + /* Reset USB nearly "by the book". RemoteWakeupConnected has + * to be checked in case boot firmware (BIOS/SMM/...) has set up + * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM). + * If the bus glue detected wakeup capability then it should + * already be enabled; if so we'll just enable it again. + */ + if ((ohci->hc_control & OHCI_CTRL_RWC) != 0) + device_set_wakeup_capable(hcd->self.controller, 1); + + switch (ohci->hc_control & OHCI_CTRL_HCFS) { + case OHCI_USB_OPER: + val = 0; + break; + case OHCI_USB_SUSPEND: + case OHCI_USB_RESUME: + ohci->hc_control &= OHCI_CTRL_RWC; + ohci->hc_control |= OHCI_USB_RESUME; + val = 10 /* msec wait */; + break; + // case OHCI_USB_RESET: + default: + ohci->hc_control &= OHCI_CTRL_RWC; + ohci->hc_control |= OHCI_USB_RESET; + val = 50 /* msec wait */; + break; + } + ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); + // flush the writes + (void) ohci_readl (ohci, &ohci->regs->control); + msleep(val); + + memset (ohci->hcca, 0, sizeof (struct ohci_hcca)); + + /* 2msec timelimit here means no irqs/preempt */ + spin_lock_irq (&ohci->lock); + +retry: + /* HC Reset requires max 10 us delay */ + ohci_writel (ohci, OHCI_HCR, &ohci->regs->cmdstatus); + val = 30; /* ... allow extra time */ + while ((ohci_readl (ohci, &ohci->regs->cmdstatus) & OHCI_HCR) != 0) { + if (--val == 0) { + spin_unlock_irq (&ohci->lock); + ohci_err (ohci, "USB HC reset timed out!\n"); + return -1; + } + udelay (1); + } + + /* now we're in the SUSPEND state ... must go OPERATIONAL + * within 2msec else HC enters RESUME + * + * ... but some hardware won't init fmInterval "by the book" + * (SiS, OPTi ...), so reset again instead. SiS doesn't need + * this if we write fmInterval after we're OPERATIONAL. + * Unclear about ALi, ServerWorks, and others ... this could + * easily be a longstanding bug in chip init on Linux. + */ + if (ohci->flags & OHCI_QUIRK_INITRESET) { + ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); + // flush those writes + (void) ohci_readl (ohci, &ohci->regs->control); + } + + /* Tell the controller where the control and bulk lists are + * The lists are empty now. */ + ohci_writel (ohci, 0, &ohci->regs->ed_controlhead); + ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead); + + /* a reset clears this */ + ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca); + + periodic_reinit (ohci); + + /* some OHCI implementations are finicky about how they init. + * bogus values here mean not even enumeration could work. + */ + if ((ohci_readl (ohci, &ohci->regs->fminterval) & 0x3fff0000) == 0 + || !ohci_readl (ohci, &ohci->regs->periodicstart)) { + if (!(ohci->flags & OHCI_QUIRK_INITRESET)) { + ohci->flags |= OHCI_QUIRK_INITRESET; + ohci_dbg (ohci, "enabling initreset quirk\n"); + goto retry; + } + spin_unlock_irq (&ohci->lock); + ohci_err (ohci, "init err (%08x %04x)\n", + ohci_readl (ohci, &ohci->regs->fminterval), + ohci_readl (ohci, &ohci->regs->periodicstart)); + return -EOVERFLOW; + } + + /* use rhsc irqs after hub_wq is allocated */ + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + hcd->uses_new_polling = 1; + + /* start controller operations */ + ohci->hc_control &= OHCI_CTRL_RWC; + ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER; + ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); + ohci->rh_state = OHCI_RH_RUNNING; + + /* wake on ConnectStatusChange, matching external hubs */ + ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status); + + /* Choose the interrupts we care about now, others later on demand */ + mask = OHCI_INTR_INIT; + ohci_writel (ohci, ~0, &ohci->regs->intrstatus); + ohci_writel (ohci, mask, &ohci->regs->intrenable); + + /* handle root hub init quirks ... */ + val = roothub_a (ohci); + /* Configure for per-port over-current protection by default */ + val &= ~RH_A_NOCP; + val |= RH_A_OCPM; + if (ohci->flags & OHCI_QUIRK_SUPERIO) { + /* NSC 87560 and maybe others. + * Ganged power switching, no over-current protection. + */ + val |= RH_A_NOCP; + val &= ~(RH_A_POTPGT | RH_A_NPS | RH_A_PSM | RH_A_OCPM); + } else if ((ohci->flags & OHCI_QUIRK_AMD756) || + (ohci->flags & OHCI_QUIRK_HUB_POWER)) { + /* hub power always on; required for AMD-756 and some + * Mac platforms. + */ + val |= RH_A_NPS; + } + ohci_writel(ohci, val, &ohci->regs->roothub.a); + + ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status); + ohci_writel (ohci, (val & RH_A_NPS) ? 0 : RH_B_PPCM, + &ohci->regs->roothub.b); + // flush those writes + (void) ohci_readl (ohci, &ohci->regs->control); + + ohci->next_statechange = jiffies + STATECHANGE_DELAY; + spin_unlock_irq (&ohci->lock); + + // POTPGT delay is bits 24-31, in 2 ms units. + mdelay ((val >> 23) & 0x1fe); + + ohci_dump(ohci); + + return 0; +} + +/* ohci_setup routine for generic controller initialization */ + +int ohci_setup(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + ohci_hcd_init(ohci); + + return ohci_init(ohci); +} +EXPORT_SYMBOL_GPL(ohci_setup); + +/* ohci_start routine for generic controller start of all OHCI bus glue */ +static int ohci_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; + + ret = ohci_run(ohci); + if (ret < 0) { + ohci_err(ohci, "can't start\n"); + ohci_stop(hcd); + } + return ret; +} + +/*-------------------------------------------------------------------------*/ + +/* + * Some OHCI controllers are known to lose track of completed TDs. They + * don't add the TDs to the hardware done queue, which means we never see + * them as being completed. + * + * This watchdog routine checks for such problems. Without some way to + * tell when those TDs have completed, we would never take their EDs off + * the unlink list. As a result, URBs could never be dequeued and + * endpoints could never be released. + */ +static void io_watchdog_func(struct timer_list *t) +{ + struct ohci_hcd *ohci = from_timer(ohci, t, io_watchdog); + bool takeback_all_pending = false; + u32 status; + u32 head; + struct ed *ed; + struct td *td, *td_start, *td_next; + unsigned frame_no, prev_frame_no = IO_WATCHDOG_OFF; + unsigned long flags; + + spin_lock_irqsave(&ohci->lock, flags); + + /* + * One way to lose track of completed TDs is if the controller + * never writes back the done queue head. If it hasn't been + * written back since the last time this function ran and if it + * was non-empty at that time, something is badly wrong with the + * hardware. + */ + status = ohci_readl(ohci, &ohci->regs->intrstatus); + if (!(status & OHCI_INTR_WDH) && ohci->wdh_cnt == ohci->prev_wdh_cnt) { + if (ohci->prev_donehead) { + ohci_err(ohci, "HcDoneHead not written back; disabled\n"); + died: + usb_hc_died(ohci_to_hcd(ohci)); + ohci_dump(ohci); + _ohci_shutdown(ohci_to_hcd(ohci)); + goto done; + } else { + /* No write back because the done queue was empty */ + takeback_all_pending = true; + } + } + + /* Check every ED which might have pending TDs */ + list_for_each_entry(ed, &ohci->eds_in_use, in_use_list) { + if (ed->pending_td) { + if (takeback_all_pending || + OKAY_TO_TAKEBACK(ohci, ed)) { + unsigned tmp = hc32_to_cpu(ohci, ed->hwINFO); + + ohci_dbg(ohci, "takeback pending TD for dev %d ep 0x%x\n", + 0x007f & tmp, + (0x000f & (tmp >> 7)) + + ((tmp & ED_IN) >> 5)); + add_to_done_list(ohci, ed->pending_td); + } + } + + /* Starting from the latest pending TD, */ + td = ed->pending_td; + + /* or the last TD on the done list, */ + if (!td) { + list_for_each_entry(td_next, &ed->td_list, td_list) { + if (!td_next->next_dl_td) + break; + td = td_next; + } + } + + /* find the last TD processed by the controller. */ + head = hc32_to_cpu(ohci, READ_ONCE(ed->hwHeadP)) & TD_MASK; + td_start = td; + td_next = list_prepare_entry(td, &ed->td_list, td_list); + list_for_each_entry_continue(td_next, &ed->td_list, td_list) { + if (head == (u32) td_next->td_dma) + break; + td = td_next; /* head pointer has passed this TD */ + } + if (td != td_start) { + /* + * In case a WDH cycle is in progress, we will wait + * for the next two cycles to complete before assuming + * this TD will never get on the done queue. + */ + ed->takeback_wdh_cnt = ohci->wdh_cnt + 2; + ed->pending_td = td; + } + } + + ohci_work(ohci); + + if (ohci->rh_state == OHCI_RH_RUNNING) { + + /* + * Sometimes a controller just stops working. We can tell + * by checking that the frame counter has advanced since + * the last time we ran. + * + * But be careful: Some controllers violate the spec by + * stopping their frame counter when no ports are active. + */ + frame_no = ohci_frame_no(ohci); + if (frame_no == ohci->prev_frame_no) { + int active_cnt = 0; + int i; + unsigned tmp; + + for (i = 0; i < ohci->num_ports; ++i) { + tmp = roothub_portstatus(ohci, i); + /* Enabled and not suspended? */ + if ((tmp & RH_PS_PES) && !(tmp & RH_PS_PSS)) + ++active_cnt; + } + + if (active_cnt > 0) { + ohci_err(ohci, "frame counter not updating; disabled\n"); + goto died; + } + } + if (!list_empty(&ohci->eds_in_use)) { + prev_frame_no = frame_no; + ohci->prev_wdh_cnt = ohci->wdh_cnt; + ohci->prev_donehead = ohci_readl(ohci, + &ohci->regs->donehead); + mod_timer(&ohci->io_watchdog, + jiffies + IO_WATCHDOG_DELAY); + } + } + + done: + ohci->prev_frame_no = prev_frame_no; + spin_unlock_irqrestore(&ohci->lock, flags); +} + +/* an interrupt happens */ + +static irqreturn_t ohci_irq (struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + struct ohci_regs __iomem *regs = ohci->regs; + int ints; + + /* Read interrupt status (and flush pending writes). We ignore the + * optimization of checking the LSB of hcca->done_head; it doesn't + * work on all systems (edge triggering for OHCI can be a factor). + */ + ints = ohci_readl(ohci, ®s->intrstatus); + + /* Check for an all 1's result which is a typical consequence + * of dead, unclocked, or unplugged (CardBus...) devices + */ + if (ints == ~(u32)0) { + ohci->rh_state = OHCI_RH_HALTED; + ohci_dbg (ohci, "device removed!\n"); + usb_hc_died(hcd); + return IRQ_HANDLED; + } + + /* We only care about interrupts that are enabled */ + ints &= ohci_readl(ohci, ®s->intrenable); + + /* interrupt for some other device? */ + if (ints == 0 || unlikely(ohci->rh_state == OHCI_RH_HALTED)) + return IRQ_NOTMINE; + + if (ints & OHCI_INTR_UE) { + // e.g. due to PCI Master/Target Abort + if (quirk_nec(ohci)) { + /* Workaround for a silicon bug in some NEC chips used + * in Apple's PowerBooks. Adapted from Darwin code. + */ + ohci_err (ohci, "OHCI Unrecoverable Error, scheduling NEC chip restart\n"); + + ohci_writel (ohci, OHCI_INTR_UE, ®s->intrdisable); + + schedule_work (&ohci->nec_work); + } else { + ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n"); + ohci->rh_state = OHCI_RH_HALTED; + usb_hc_died(hcd); + } + + ohci_dump(ohci); + ohci_usb_reset (ohci); + } + + if (ints & OHCI_INTR_RHSC) { + ohci_dbg(ohci, "rhsc\n"); + ohci->next_statechange = jiffies + STATECHANGE_DELAY; + ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC, + ®s->intrstatus); + + /* NOTE: Vendors didn't always make the same implementation + * choices for RHSC. Many followed the spec; RHSC triggers + * on an edge, like setting and maybe clearing a port status + * change bit. With others it's level-triggered, active + * until hub_wq clears all the port status change bits. We'll + * always disable it here and rely on polling until hub_wq + * re-enables it. + */ + ohci_writel(ohci, OHCI_INTR_RHSC, ®s->intrdisable); + usb_hcd_poll_rh_status(hcd); + } + + /* For connect and disconnect events, we expect the controller + * to turn on RHSC along with RD. But for remote wakeup events + * this might not happen. + */ + else if (ints & OHCI_INTR_RD) { + ohci_dbg(ohci, "resume detect\n"); + ohci_writel(ohci, OHCI_INTR_RD, ®s->intrstatus); + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + if (ohci->autostop) { + spin_lock (&ohci->lock); + ohci_rh_resume (ohci); + spin_unlock (&ohci->lock); + } else + usb_hcd_resume_root_hub(hcd); + } + + spin_lock(&ohci->lock); + if (ints & OHCI_INTR_WDH) + update_done_list(ohci); + + /* could track INTR_SO to reduce available PCI/... bandwidth */ + + /* handle any pending URB/ED unlinks, leaving INTR_SF enabled + * when there's still unlinking to be done (next frame). + */ + ohci_work(ohci); + if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list + && ohci->rh_state == OHCI_RH_RUNNING) + ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable); + + if (ohci->rh_state == OHCI_RH_RUNNING) { + ohci_writel (ohci, ints, ®s->intrstatus); + if (ints & OHCI_INTR_WDH) + ++ohci->wdh_cnt; + + ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable); + // flush those writes + (void) ohci_readl (ohci, &ohci->regs->control); + } + spin_unlock(&ohci->lock); + + return IRQ_HANDLED; +} + +/*-------------------------------------------------------------------------*/ + +static void ohci_stop (struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + + ohci_dump(ohci); + + if (quirk_nec(ohci)) + flush_work(&ohci->nec_work); + del_timer_sync(&ohci->io_watchdog); + ohci->prev_frame_no = IO_WATCHDOG_OFF; + + ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); + ohci_usb_reset(ohci); + free_irq(hcd->irq, hcd); + hcd->irq = 0; + + if (quirk_amdiso(ohci)) + usb_amd_dev_put(); + + remove_debug_files (ohci); + ohci_mem_cleanup (ohci); + if (ohci->hcca) { + if (hcd->localmem_pool) + gen_pool_free(hcd->localmem_pool, + (unsigned long)ohci->hcca, + sizeof(*ohci->hcca)); + else + dma_free_coherent(hcd->self.controller, + sizeof(*ohci->hcca), + ohci->hcca, ohci->hcca_dma); + ohci->hcca = NULL; + ohci->hcca_dma = 0; + } +} + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_PM) || defined(CONFIG_USB_PCI) + +/* must not be called from interrupt context */ +int ohci_restart(struct ohci_hcd *ohci) +{ + int temp; + int i; + struct urb_priv *priv; + + ohci_init(ohci); + spin_lock_irq(&ohci->lock); + ohci->rh_state = OHCI_RH_HALTED; + + /* Recycle any "live" eds/tds (and urbs). */ + if (!list_empty (&ohci->pending)) + ohci_dbg(ohci, "abort schedule...\n"); + list_for_each_entry (priv, &ohci->pending, pending) { + struct urb *urb = priv->td[0]->urb; + struct ed *ed = priv->ed; + + switch (ed->state) { + case ED_OPER: + ed->state = ED_UNLINK; + ed->hwINFO |= cpu_to_hc32(ohci, ED_DEQUEUE); + ed_deschedule (ohci, ed); + + ed->ed_next = ohci->ed_rm_list; + ed->ed_prev = NULL; + ohci->ed_rm_list = ed; + fallthrough; + case ED_UNLINK: + break; + default: + ohci_dbg(ohci, "bogus ed %p state %d\n", + ed, ed->state); + } + + if (!urb->unlinked) + urb->unlinked = -ESHUTDOWN; + } + ohci_work(ohci); + spin_unlock_irq(&ohci->lock); + + /* paranoia, in case that didn't work: */ + + /* empty the interrupt branches */ + for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0; + for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0; + + /* no EDs to remove */ + ohci->ed_rm_list = NULL; + + /* empty control and bulk lists */ + ohci->ed_controltail = NULL; + ohci->ed_bulktail = NULL; + + if ((temp = ohci_run (ohci)) < 0) { + ohci_err (ohci, "can't restart, %d\n", temp); + return temp; + } + ohci_dbg(ohci, "restart complete\n"); + return 0; +} +EXPORT_SYMBOL_GPL(ohci_restart); + +#endif + +#ifdef CONFIG_PM + +int ohci_suspend(struct usb_hcd *hcd, bool do_wakeup) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + unsigned long flags; + int rc = 0; + + /* Disable irq emission and mark HW unaccessible. Use + * the spinlock to properly synchronize with possible pending + * RH suspend or resume activity. + */ + spin_lock_irqsave (&ohci->lock, flags); + ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); + (void)ohci_readl(ohci, &ohci->regs->intrdisable); + + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + spin_unlock_irqrestore (&ohci->lock, flags); + + synchronize_irq(hcd->irq); + + if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) { + ohci_resume(hcd, false); + rc = -EBUSY; + } + return rc; +} +EXPORT_SYMBOL_GPL(ohci_suspend); + + +int ohci_resume(struct usb_hcd *hcd, bool hibernated) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int port; + bool need_reinit = false; + + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + /* Make sure resume from hibernation re-enumerates everything */ + if (hibernated) + ohci_usb_reset(ohci); + + /* See if the controller is already running or has been reset */ + ohci->hc_control = ohci_readl(ohci, &ohci->regs->control); + if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) { + need_reinit = true; + } else { + switch (ohci->hc_control & OHCI_CTRL_HCFS) { + case OHCI_USB_OPER: + case OHCI_USB_RESET: + need_reinit = true; + } + } + + /* If needed, reinitialize and suspend the root hub */ + if (need_reinit) { + spin_lock_irq(&ohci->lock); + ohci_rh_resume(ohci); + ohci_rh_suspend(ohci, 0); + spin_unlock_irq(&ohci->lock); + } + + /* Normally just turn on port power and enable interrupts */ + else { + ohci_dbg(ohci, "powerup ports\n"); + for (port = 0; port < ohci->num_ports; port++) + ohci_writel(ohci, RH_PS_PPS, + &ohci->regs->roothub.portstatus[port]); + + ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable); + ohci_readl(ohci, &ohci->regs->intrenable); + msleep(20); + } + + usb_hcd_resume_root_hub(hcd); + + return 0; +} +EXPORT_SYMBOL_GPL(ohci_resume); + +#endif + +/*-------------------------------------------------------------------------*/ + +/* + * Generic structure: This gets copied for platform drivers so that + * individual entries can be overridden as needed. + */ + +static const struct hc_driver ohci_hc_driver = { + .description = hcd_name, + .product_desc = "OHCI Host Controller", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB11, + + /* + * basic lifecycle operations + */ + .reset = ohci_setup, + .start = ohci_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +void ohci_init_driver(struct hc_driver *drv, + const struct ohci_driver_overrides *over) +{ + /* Copy the generic table to drv and then apply the overrides */ + *drv = ohci_hc_driver; + + if (over) { + drv->product_desc = over->product_desc; + drv->hcd_priv_size += over->extra_priv_size; + if (over->reset) + drv->reset = over->reset; + } +} +EXPORT_SYMBOL_GPL(ohci_init_driver); + +/*-------------------------------------------------------------------------*/ + +MODULE_AUTHOR (DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE ("GPL"); + +#if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_SA1111) +#include "ohci-sa1111.c" +#define SA1111_DRIVER ohci_hcd_sa1111_driver +#endif + +#ifdef CONFIG_USB_OHCI_HCD_PPC_OF +#include "ohci-ppc-of.c" +#define OF_PLATFORM_DRIVER ohci_hcd_ppc_of_driver +#endif + +#ifdef CONFIG_PPC_PS3 +#include "ohci-ps3.c" +#define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver +#endif + +#ifdef CONFIG_MFD_SM501 +#include "ohci-sm501.c" +#define SM501_OHCI_DRIVER ohci_hcd_sm501_driver +#endif + +#ifdef CONFIG_MFD_TC6393XB +#include "ohci-tmio.c" +#define TMIO_OHCI_DRIVER ohci_hcd_tmio_driver +#endif + +static int __init ohci_hcd_mod_init(void) +{ + int retval = 0; + + if (usb_disabled()) + return -ENODEV; + + pr_debug ("%s: block sizes: ed %zd td %zd\n", hcd_name, + sizeof (struct ed), sizeof (struct td)); + set_bit(USB_OHCI_LOADED, &usb_hcds_loaded); + + ohci_debug_root = debugfs_create_dir("ohci", usb_debug_root); + +#ifdef PS3_SYSTEM_BUS_DRIVER + retval = ps3_ohci_driver_register(&PS3_SYSTEM_BUS_DRIVER); + if (retval < 0) + goto error_ps3; +#endif + +#ifdef OF_PLATFORM_DRIVER + retval = platform_driver_register(&OF_PLATFORM_DRIVER); + if (retval < 0) + goto error_of_platform; +#endif + +#ifdef SA1111_DRIVER + retval = sa1111_driver_register(&SA1111_DRIVER); + if (retval < 0) + goto error_sa1111; +#endif + +#ifdef SM501_OHCI_DRIVER + retval = platform_driver_register(&SM501_OHCI_DRIVER); + if (retval < 0) + goto error_sm501; +#endif + +#ifdef TMIO_OHCI_DRIVER + retval = platform_driver_register(&TMIO_OHCI_DRIVER); + if (retval < 0) + goto error_tmio; +#endif + + return retval; + + /* Error path */ +#ifdef TMIO_OHCI_DRIVER + platform_driver_unregister(&TMIO_OHCI_DRIVER); + error_tmio: +#endif +#ifdef SM501_OHCI_DRIVER + platform_driver_unregister(&SM501_OHCI_DRIVER); + error_sm501: +#endif +#ifdef SA1111_DRIVER + sa1111_driver_unregister(&SA1111_DRIVER); + error_sa1111: +#endif +#ifdef OF_PLATFORM_DRIVER + platform_driver_unregister(&OF_PLATFORM_DRIVER); + error_of_platform: +#endif +#ifdef PS3_SYSTEM_BUS_DRIVER + ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); + error_ps3: +#endif + debugfs_remove(ohci_debug_root); + ohci_debug_root = NULL; + + clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded); + return retval; +} +module_init(ohci_hcd_mod_init); + +static void __exit ohci_hcd_mod_exit(void) +{ +#ifdef TMIO_OHCI_DRIVER + platform_driver_unregister(&TMIO_OHCI_DRIVER); +#endif +#ifdef SM501_OHCI_DRIVER + platform_driver_unregister(&SM501_OHCI_DRIVER); +#endif +#ifdef SA1111_DRIVER + sa1111_driver_unregister(&SA1111_DRIVER); +#endif +#ifdef OF_PLATFORM_DRIVER + platform_driver_unregister(&OF_PLATFORM_DRIVER); +#endif +#ifdef PS3_SYSTEM_BUS_DRIVER + ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); +#endif + debugfs_remove(ohci_debug_root); + clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded); +} +module_exit(ohci_hcd_mod_exit); + |