summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/pci-quirks.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/usb/host/pci-quirks.c1287
1 files changed, 1287 insertions, 0 deletions
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
new file mode 100644
index 000000000..ef08d68b9
--- /dev/null
+++ b/drivers/usb/host/pci-quirks.c
@@ -0,0 +1,1287 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file contains code to reset and initialize USB host controllers.
+ * Some of it includes work-arounds for PCI hardware and BIOS quirks.
+ * It may need to run early during booting -- before USB would normally
+ * initialize -- to ensure that Linux doesn't use any legacy modes.
+ *
+ * Copyright (c) 1999 Martin Mares <mj@ucw.cz>
+ * (and others)
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/of.h>
+#include <linux/iopoll.h>
+
+#include "pci-quirks.h"
+#include "xhci-ext-caps.h"
+
+
+#define UHCI_USBLEGSUP 0xc0 /* legacy support */
+#define UHCI_USBCMD 0 /* command register */
+#define UHCI_USBINTR 4 /* interrupt register */
+#define UHCI_USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
+#define UHCI_USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
+#define UHCI_USBCMD_RUN 0x0001 /* RUN/STOP bit */
+#define UHCI_USBCMD_HCRESET 0x0002 /* Host Controller reset */
+#define UHCI_USBCMD_EGSM 0x0008 /* Global Suspend Mode */
+#define UHCI_USBCMD_CONFIGURE 0x0040 /* Config Flag */
+#define UHCI_USBINTR_RESUME 0x0002 /* Resume interrupt enable */
+
+#define OHCI_CONTROL 0x04
+#define OHCI_CMDSTATUS 0x08
+#define OHCI_INTRSTATUS 0x0c
+#define OHCI_INTRENABLE 0x10
+#define OHCI_INTRDISABLE 0x14
+#define OHCI_FMINTERVAL 0x34
+#define OHCI_HCFS (3 << 6) /* hc functional state */
+#define OHCI_HCR (1 << 0) /* host controller reset */
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
+#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
+#define OHCI_INTR_OC (1 << 30) /* ownership change */
+
+#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
+#define EHCI_USBCMD 0 /* command register */
+#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
+#define EHCI_USBSTS 4 /* status register */
+#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
+#define EHCI_USBINTR 8 /* interrupt register */
+#define EHCI_CONFIGFLAG 0x40 /* configured flag register */
+#define EHCI_USBLEGSUP 0 /* legacy support register */
+#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
+#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
+#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
+#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
+
+/* AMD quirk use */
+#define AB_REG_BAR_LOW 0xe0
+#define AB_REG_BAR_HIGH 0xe1
+#define AB_REG_BAR_SB700 0xf0
+#define AB_INDX(addr) ((addr) + 0x00)
+#define AB_DATA(addr) ((addr) + 0x04)
+#define AX_INDXC 0x30
+#define AX_DATAC 0x34
+
+#define PT_ADDR_INDX 0xE8
+#define PT_READ_INDX 0xE4
+#define PT_SIG_1_ADDR 0xA520
+#define PT_SIG_2_ADDR 0xA521
+#define PT_SIG_3_ADDR 0xA522
+#define PT_SIG_4_ADDR 0xA523
+#define PT_SIG_1_DATA 0x78
+#define PT_SIG_2_DATA 0x56
+#define PT_SIG_3_DATA 0x34
+#define PT_SIG_4_DATA 0x12
+#define PT4_P1_REG 0xB521
+#define PT4_P2_REG 0xB522
+#define PT2_P1_REG 0xD520
+#define PT2_P2_REG 0xD521
+#define PT1_P1_REG 0xD522
+#define PT1_P2_REG 0xD523
+
+#define NB_PCIE_INDX_ADDR 0xe0
+#define NB_PCIE_INDX_DATA 0xe4
+#define PCIE_P_CNTL 0x10040
+#define BIF_NB 0x10002
+#define NB_PIF0_PWRDOWN_0 0x01100012
+#define NB_PIF0_PWRDOWN_1 0x01100013
+
+#define USB_INTEL_XUSB2PR 0xD0
+#define USB_INTEL_USB2PRM 0xD4
+#define USB_INTEL_USB3_PSSEN 0xD8
+#define USB_INTEL_USB3PRM 0xDC
+
+/* ASMEDIA quirk use */
+#define ASMT_DATA_WRITE0_REG 0xF8
+#define ASMT_DATA_WRITE1_REG 0xFC
+#define ASMT_CONTROL_REG 0xE0
+#define ASMT_CONTROL_WRITE_BIT 0x02
+#define ASMT_WRITEREG_CMD 0x10423
+#define ASMT_FLOWCTL_ADDR 0xFA30
+#define ASMT_FLOWCTL_DATA 0xBA
+#define ASMT_PSEUDO_DATA 0
+
+/*
+ * amd_chipset_gen values represent AMD different chipset generations
+ */
+enum amd_chipset_gen {
+ NOT_AMD_CHIPSET = 0,
+ AMD_CHIPSET_SB600,
+ AMD_CHIPSET_SB700,
+ AMD_CHIPSET_SB800,
+ AMD_CHIPSET_HUDSON2,
+ AMD_CHIPSET_BOLTON,
+ AMD_CHIPSET_YANGTZE,
+ AMD_CHIPSET_TAISHAN,
+ AMD_CHIPSET_UNKNOWN,
+};
+
+struct amd_chipset_type {
+ enum amd_chipset_gen gen;
+ u8 rev;
+};
+
+static struct amd_chipset_info {
+ struct pci_dev *nb_dev;
+ struct pci_dev *smbus_dev;
+ int nb_type;
+ struct amd_chipset_type sb_type;
+ int isoc_reqs;
+ int probe_count;
+ bool need_pll_quirk;
+} amd_chipset;
+
+static DEFINE_SPINLOCK(amd_lock);
+
+/*
+ * amd_chipset_sb_type_init - initialize amd chipset southbridge type
+ *
+ * AMD FCH/SB generation and revision is identified by SMBus controller
+ * vendor, device and revision IDs.
+ *
+ * Returns: 1 if it is an AMD chipset, 0 otherwise.
+ */
+static int amd_chipset_sb_type_init(struct amd_chipset_info *pinfo)
+{
+ u8 rev = 0;
+ pinfo->sb_type.gen = AMD_CHIPSET_UNKNOWN;
+
+ pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
+ PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
+ if (pinfo->smbus_dev) {
+ rev = pinfo->smbus_dev->revision;
+ if (rev >= 0x10 && rev <= 0x1f)
+ pinfo->sb_type.gen = AMD_CHIPSET_SB600;
+ else if (rev >= 0x30 && rev <= 0x3f)
+ pinfo->sb_type.gen = AMD_CHIPSET_SB700;
+ else if (rev >= 0x40 && rev <= 0x4f)
+ pinfo->sb_type.gen = AMD_CHIPSET_SB800;
+ } else {
+ pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+ PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL);
+
+ if (pinfo->smbus_dev) {
+ rev = pinfo->smbus_dev->revision;
+ if (rev >= 0x11 && rev <= 0x14)
+ pinfo->sb_type.gen = AMD_CHIPSET_HUDSON2;
+ else if (rev >= 0x15 && rev <= 0x18)
+ pinfo->sb_type.gen = AMD_CHIPSET_BOLTON;
+ else if (rev >= 0x39 && rev <= 0x3a)
+ pinfo->sb_type.gen = AMD_CHIPSET_YANGTZE;
+ } else {
+ pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+ 0x145c, NULL);
+ if (pinfo->smbus_dev) {
+ rev = pinfo->smbus_dev->revision;
+ pinfo->sb_type.gen = AMD_CHIPSET_TAISHAN;
+ } else {
+ pinfo->sb_type.gen = NOT_AMD_CHIPSET;
+ return 0;
+ }
+ }
+ }
+ pinfo->sb_type.rev = rev;
+ return 1;
+}
+
+void sb800_prefetch(struct device *dev, int on)
+{
+ u16 misc;
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ pci_read_config_word(pdev, 0x50, &misc);
+ if (on == 0)
+ pci_write_config_word(pdev, 0x50, misc & 0xfcff);
+ else
+ pci_write_config_word(pdev, 0x50, misc | 0x0300);
+}
+EXPORT_SYMBOL_GPL(sb800_prefetch);
+
+static void usb_amd_find_chipset_info(void)
+{
+ unsigned long flags;
+ struct amd_chipset_info info;
+ info.need_pll_quirk = false;
+
+ spin_lock_irqsave(&amd_lock, flags);
+
+ /* probe only once */
+ if (amd_chipset.probe_count > 0) {
+ amd_chipset.probe_count++;
+ spin_unlock_irqrestore(&amd_lock, flags);
+ return;
+ }
+ memset(&info, 0, sizeof(info));
+ spin_unlock_irqrestore(&amd_lock, flags);
+
+ if (!amd_chipset_sb_type_init(&info)) {
+ goto commit;
+ }
+
+ switch (info.sb_type.gen) {
+ case AMD_CHIPSET_SB700:
+ info.need_pll_quirk = info.sb_type.rev <= 0x3B;
+ break;
+ case AMD_CHIPSET_SB800:
+ case AMD_CHIPSET_HUDSON2:
+ case AMD_CHIPSET_BOLTON:
+ info.need_pll_quirk = true;
+ break;
+ default:
+ info.need_pll_quirk = false;
+ break;
+ }
+
+ if (!info.need_pll_quirk) {
+ if (info.smbus_dev) {
+ pci_dev_put(info.smbus_dev);
+ info.smbus_dev = NULL;
+ }
+ goto commit;
+ }
+
+ info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL);
+ if (info.nb_dev) {
+ info.nb_type = 1;
+ } else {
+ info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
+ if (info.nb_dev) {
+ info.nb_type = 2;
+ } else {
+ info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+ 0x9600, NULL);
+ if (info.nb_dev)
+ info.nb_type = 3;
+ }
+ }
+
+ printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n");
+
+commit:
+
+ spin_lock_irqsave(&amd_lock, flags);
+ if (amd_chipset.probe_count > 0) {
+ /* race - someone else was faster - drop devices */
+
+ /* Mark that we where here */
+ amd_chipset.probe_count++;
+
+ spin_unlock_irqrestore(&amd_lock, flags);
+
+ pci_dev_put(info.nb_dev);
+ pci_dev_put(info.smbus_dev);
+
+ } else {
+ /* no race - commit the result */
+ info.probe_count++;
+ amd_chipset = info;
+ spin_unlock_irqrestore(&amd_lock, flags);
+ }
+}
+
+int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev)
+{
+ /* Make sure amd chipset type has already been initialized */
+ usb_amd_find_chipset_info();
+ if (amd_chipset.sb_type.gen == AMD_CHIPSET_YANGTZE ||
+ amd_chipset.sb_type.gen == AMD_CHIPSET_TAISHAN) {
+ dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n");
+ return 1;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_amd_remote_wakeup_quirk);
+
+bool usb_amd_hang_symptom_quirk(void)
+{
+ u8 rev;
+
+ usb_amd_find_chipset_info();
+ rev = amd_chipset.sb_type.rev;
+ /* SB600 and old version of SB700 have hang symptom bug */
+ return amd_chipset.sb_type.gen == AMD_CHIPSET_SB600 ||
+ (amd_chipset.sb_type.gen == AMD_CHIPSET_SB700 &&
+ rev >= 0x3a && rev <= 0x3b);
+}
+EXPORT_SYMBOL_GPL(usb_amd_hang_symptom_quirk);
+
+bool usb_amd_prefetch_quirk(void)
+{
+ usb_amd_find_chipset_info();
+ /* SB800 needs pre-fetch fix */
+ return amd_chipset.sb_type.gen == AMD_CHIPSET_SB800;
+}
+EXPORT_SYMBOL_GPL(usb_amd_prefetch_quirk);
+
+bool usb_amd_quirk_pll_check(void)
+{
+ usb_amd_find_chipset_info();
+ return amd_chipset.need_pll_quirk;
+}
+EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_check);
+
+/*
+ * The hardware normally enables the A-link power management feature, which
+ * lets the system lower the power consumption in idle states.
+ *
+ * This USB quirk prevents the link going into that lower power state
+ * during isochronous transfers.
+ *
+ * Without this quirk, isochronous stream on OHCI/EHCI/xHCI controllers of
+ * some AMD platforms may stutter or have breaks occasionally.
+ */
+static void usb_amd_quirk_pll(int disable)
+{
+ u32 addr, addr_low, addr_high, val;
+ u32 bit = disable ? 0 : 1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&amd_lock, flags);
+
+ if (disable) {
+ amd_chipset.isoc_reqs++;
+ if (amd_chipset.isoc_reqs > 1) {
+ spin_unlock_irqrestore(&amd_lock, flags);
+ return;
+ }
+ } else {
+ amd_chipset.isoc_reqs--;
+ if (amd_chipset.isoc_reqs > 0) {
+ spin_unlock_irqrestore(&amd_lock, flags);
+ return;
+ }
+ }
+
+ if (amd_chipset.sb_type.gen == AMD_CHIPSET_SB800 ||
+ amd_chipset.sb_type.gen == AMD_CHIPSET_HUDSON2 ||
+ amd_chipset.sb_type.gen == AMD_CHIPSET_BOLTON) {
+ outb_p(AB_REG_BAR_LOW, 0xcd6);
+ addr_low = inb_p(0xcd7);
+ outb_p(AB_REG_BAR_HIGH, 0xcd6);
+ addr_high = inb_p(0xcd7);
+ addr = addr_high << 8 | addr_low;
+
+ outl_p(0x30, AB_INDX(addr));
+ outl_p(0x40, AB_DATA(addr));
+ outl_p(0x34, AB_INDX(addr));
+ val = inl_p(AB_DATA(addr));
+ } else if (amd_chipset.sb_type.gen == AMD_CHIPSET_SB700 &&
+ amd_chipset.sb_type.rev <= 0x3b) {
+ pci_read_config_dword(amd_chipset.smbus_dev,
+ AB_REG_BAR_SB700, &addr);
+ outl(AX_INDXC, AB_INDX(addr));
+ outl(0x40, AB_DATA(addr));
+ outl(AX_DATAC, AB_INDX(addr));
+ val = inl(AB_DATA(addr));
+ } else {
+ spin_unlock_irqrestore(&amd_lock, flags);
+ return;
+ }
+
+ if (disable) {
+ val &= ~0x08;
+ val |= (1 << 4) | (1 << 9);
+ } else {
+ val |= 0x08;
+ val &= ~((1 << 4) | (1 << 9));
+ }
+ outl_p(val, AB_DATA(addr));
+
+ if (!amd_chipset.nb_dev) {
+ spin_unlock_irqrestore(&amd_lock, flags);
+ return;
+ }
+
+ if (amd_chipset.nb_type == 1 || amd_chipset.nb_type == 3) {
+ addr = PCIE_P_CNTL;
+ pci_write_config_dword(amd_chipset.nb_dev,
+ NB_PCIE_INDX_ADDR, addr);
+ pci_read_config_dword(amd_chipset.nb_dev,
+ NB_PCIE_INDX_DATA, &val);
+
+ val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12));
+ val |= bit | (bit << 3) | (bit << 12);
+ val |= ((!bit) << 4) | ((!bit) << 9);
+ pci_write_config_dword(amd_chipset.nb_dev,
+ NB_PCIE_INDX_DATA, val);
+
+ addr = BIF_NB;
+ pci_write_config_dword(amd_chipset.nb_dev,
+ NB_PCIE_INDX_ADDR, addr);
+ pci_read_config_dword(amd_chipset.nb_dev,
+ NB_PCIE_INDX_DATA, &val);
+ val &= ~(1 << 8);
+ val |= bit << 8;
+
+ pci_write_config_dword(amd_chipset.nb_dev,
+ NB_PCIE_INDX_DATA, val);
+ } else if (amd_chipset.nb_type == 2) {
+ addr = NB_PIF0_PWRDOWN_0;
+ pci_write_config_dword(amd_chipset.nb_dev,
+ NB_PCIE_INDX_ADDR, addr);
+ pci_read_config_dword(amd_chipset.nb_dev,
+ NB_PCIE_INDX_DATA, &val);
+ if (disable)
+ val &= ~(0x3f << 7);
+ else
+ val |= 0x3f << 7;
+
+ pci_write_config_dword(amd_chipset.nb_dev,
+ NB_PCIE_INDX_DATA, val);
+
+ addr = NB_PIF0_PWRDOWN_1;
+ pci_write_config_dword(amd_chipset.nb_dev,
+ NB_PCIE_INDX_ADDR, addr);
+ pci_read_config_dword(amd_chipset.nb_dev,
+ NB_PCIE_INDX_DATA, &val);
+ if (disable)
+ val &= ~(0x3f << 7);
+ else
+ val |= 0x3f << 7;
+
+ pci_write_config_dword(amd_chipset.nb_dev,
+ NB_PCIE_INDX_DATA, val);
+ }
+
+ spin_unlock_irqrestore(&amd_lock, flags);
+ return;
+}
+
+void usb_amd_quirk_pll_disable(void)
+{
+ usb_amd_quirk_pll(1);
+}
+EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
+
+static int usb_asmedia_wait_write(struct pci_dev *pdev)
+{
+ unsigned long retry_count;
+ unsigned char value;
+
+ for (retry_count = 1000; retry_count > 0; --retry_count) {
+
+ pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
+
+ if (value == 0xff) {
+ dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
+ return -EIO;
+ }
+
+ if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
+ return 0;
+
+ udelay(50);
+ }
+
+ dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
+ return -ETIMEDOUT;
+}
+
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
+{
+ if (usb_asmedia_wait_write(pdev) != 0)
+ return;
+
+ /* send command and address to device */
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
+ pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+
+ if (usb_asmedia_wait_write(pdev) != 0)
+ return;
+
+ /* send data to device */
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
+ pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+}
+EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+
+void usb_amd_quirk_pll_enable(void)
+{
+ usb_amd_quirk_pll(0);
+}
+EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_enable);
+
+void usb_amd_dev_put(void)
+{
+ struct pci_dev *nb, *smbus;
+ unsigned long flags;
+
+ spin_lock_irqsave(&amd_lock, flags);
+
+ amd_chipset.probe_count--;
+ if (amd_chipset.probe_count > 0) {
+ spin_unlock_irqrestore(&amd_lock, flags);
+ return;
+ }
+
+ /* save them to pci_dev_put outside of spinlock */
+ nb = amd_chipset.nb_dev;
+ smbus = amd_chipset.smbus_dev;
+
+ amd_chipset.nb_dev = NULL;
+ amd_chipset.smbus_dev = NULL;
+ amd_chipset.nb_type = 0;
+ memset(&amd_chipset.sb_type, 0, sizeof(amd_chipset.sb_type));
+ amd_chipset.isoc_reqs = 0;
+ amd_chipset.need_pll_quirk = false;
+
+ spin_unlock_irqrestore(&amd_lock, flags);
+
+ pci_dev_put(nb);
+ pci_dev_put(smbus);
+}
+EXPORT_SYMBOL_GPL(usb_amd_dev_put);
+
+/*
+ * Check if port is disabled in BIOS on AMD Promontory host.
+ * BIOS Disabled ports may wake on connect/disconnect and need
+ * driver workaround to keep them disabled.
+ * Returns true if port is marked disabled.
+ */
+bool usb_amd_pt_check_port(struct device *device, int port)
+{
+ unsigned char value, port_shift;
+ struct pci_dev *pdev;
+ u16 reg;
+
+ pdev = to_pci_dev(device);
+ pci_write_config_word(pdev, PT_ADDR_INDX, PT_SIG_1_ADDR);
+
+ pci_read_config_byte(pdev, PT_READ_INDX, &value);
+ if (value != PT_SIG_1_DATA)
+ return false;
+
+ pci_write_config_word(pdev, PT_ADDR_INDX, PT_SIG_2_ADDR);
+
+ pci_read_config_byte(pdev, PT_READ_INDX, &value);
+ if (value != PT_SIG_2_DATA)
+ return false;
+
+ pci_write_config_word(pdev, PT_ADDR_INDX, PT_SIG_3_ADDR);
+
+ pci_read_config_byte(pdev, PT_READ_INDX, &value);
+ if (value != PT_SIG_3_DATA)
+ return false;
+
+ pci_write_config_word(pdev, PT_ADDR_INDX, PT_SIG_4_ADDR);
+
+ pci_read_config_byte(pdev, PT_READ_INDX, &value);
+ if (value != PT_SIG_4_DATA)
+ return false;
+
+ /* Check disabled port setting, if bit is set port is enabled */
+ switch (pdev->device) {
+ case 0x43b9:
+ case 0x43ba:
+ /*
+ * device is AMD_PROMONTORYA_4(0x43b9) or PROMONTORYA_3(0x43ba)
+ * PT4_P1_REG bits[7..1] represents USB2.0 ports 6 to 0
+ * PT4_P2_REG bits[6..0] represents ports 13 to 7
+ */
+ if (port > 6) {
+ reg = PT4_P2_REG;
+ port_shift = port - 7;
+ } else {
+ reg = PT4_P1_REG;
+ port_shift = port + 1;
+ }
+ break;
+ case 0x43bb:
+ /*
+ * device is AMD_PROMONTORYA_2(0x43bb)
+ * PT2_P1_REG bits[7..5] represents USB2.0 ports 2 to 0
+ * PT2_P2_REG bits[5..0] represents ports 9 to 3
+ */
+ if (port > 2) {
+ reg = PT2_P2_REG;
+ port_shift = port - 3;
+ } else {
+ reg = PT2_P1_REG;
+ port_shift = port + 5;
+ }
+ break;
+ case 0x43bc:
+ /*
+ * device is AMD_PROMONTORYA_1(0x43bc)
+ * PT1_P1_REG[7..4] represents USB2.0 ports 3 to 0
+ * PT1_P2_REG[5..0] represents ports 9 to 4
+ */
+ if (port > 3) {
+ reg = PT1_P2_REG;
+ port_shift = port - 4;
+ } else {
+ reg = PT1_P1_REG;
+ port_shift = port + 4;
+ }
+ break;
+ default:
+ return false;
+ }
+ pci_write_config_word(pdev, PT_ADDR_INDX, reg);
+ pci_read_config_byte(pdev, PT_READ_INDX, &value);
+
+ return !(value & BIT(port_shift));
+}
+EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
+
+/*
+ * Make sure the controller is completely inactive, unable to
+ * generate interrupts or do DMA.
+ */
+void uhci_reset_hc(struct pci_dev *pdev, unsigned long base)
+{
+ /* Turn off PIRQ enable and SMI enable. (This also turns off the
+ * BIOS's USB Legacy Support.) Turn off all the R/WC bits too.
+ */
+ pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC);
+
+ /* Reset the HC - this will force us to get a
+ * new notification of any already connected
+ * ports due to the virtual disconnect that it
+ * implies.
+ */
+ outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD);
+ mb();
+ udelay(5);
+ if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET)
+ dev_warn(&pdev->dev, "HCRESET not completed yet!\n");
+
+ /* Just to be safe, disable interrupt requests and
+ * make sure the controller is stopped.
+ */
+ outw(0, base + UHCI_USBINTR);
+ outw(0, base + UHCI_USBCMD);
+}
+EXPORT_SYMBOL_GPL(uhci_reset_hc);
+
+/*
+ * Initialize a controller that was newly discovered or has just been
+ * resumed. In either case we can't be sure of its previous state.
+ *
+ * Returns: 1 if the controller was reset, 0 otherwise.
+ */
+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
+{
+ u16 legsup;
+ unsigned int cmd, intr;
+
+ /*
+ * When restarting a suspended controller, we expect all the
+ * settings to be the same as we left them:
+ *
+ * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
+ * Controller is stopped and configured with EGSM set;
+ * No interrupts enabled except possibly Resume Detect.
+ *
+ * If any of these conditions are violated we do a complete reset.
+ */
+ pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup);
+ if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) {
+ dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n",
+ __func__, legsup);
+ goto reset_needed;
+ }
+
+ cmd = inw(base + UHCI_USBCMD);
+ if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) ||
+ !(cmd & UHCI_USBCMD_EGSM)) {
+ dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n",
+ __func__, cmd);
+ goto reset_needed;
+ }
+
+ intr = inw(base + UHCI_USBINTR);
+ if (intr & (~UHCI_USBINTR_RESUME)) {
+ dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n",
+ __func__, intr);
+ goto reset_needed;
+ }
+ return 0;
+
+reset_needed:
+ dev_dbg(&pdev->dev, "Performing full reset\n");
+ uhci_reset_hc(pdev, base);
+ return 1;
+}
+EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
+
+static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
+{
+ u16 cmd;
+ return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask);
+}
+
+#define pio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_IO)
+#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY)
+
+static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
+{
+ unsigned long base = 0;
+ int i;
+
+ if (!pio_enabled(pdev))
+ return;
+
+ for (i = 0; i < PCI_STD_NUM_BARS; i++)
+ if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
+ base = pci_resource_start(pdev, i);
+ break;
+ }
+
+ if (base)
+ uhci_check_and_reset_hc(pdev, base);
+}
+
+static int mmio_resource_enabled(struct pci_dev *pdev, int idx)
+{
+ return pci_resource_start(pdev, idx) && mmio_enabled(pdev);
+}
+
+static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
+{
+ void __iomem *base;
+ u32 control;
+ u32 fminterval = 0;
+ bool no_fminterval = false;
+ int cnt;
+
+ if (!mmio_resource_enabled(pdev, 0))
+ return;
+
+ base = pci_ioremap_bar(pdev, 0);
+ if (base == NULL)
+ return;
+
+ /*
+ * ULi M5237 OHCI controller locks the whole system when accessing
+ * the OHCI_FMINTERVAL offset.
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_AL && pdev->device == 0x5237)
+ no_fminterval = true;
+
+ control = readl(base + OHCI_CONTROL);
+
+/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
+#ifdef __hppa__
+#define OHCI_CTRL_MASK (OHCI_CTRL_RWC | OHCI_CTRL_IR)
+#else
+#define OHCI_CTRL_MASK OHCI_CTRL_RWC
+
+ if (control & OHCI_CTRL_IR) {
+ int wait_time = 500; /* arbitrary; 5 seconds */
+ writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
+ writel(OHCI_OCR, base + OHCI_CMDSTATUS);
+ while (wait_time > 0 &&
+ readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
+ wait_time -= 10;
+ msleep(10);
+ }
+ if (wait_time <= 0)
+ dev_warn(&pdev->dev,
+ "OHCI: BIOS handoff failed (BIOS bug?) %08x\n",
+ readl(base + OHCI_CONTROL));
+ }
+#endif
+
+ /* disable interrupts */
+ writel((u32) ~0, base + OHCI_INTRDISABLE);
+
+ /* Go into the USB_RESET state, preserving RWC (and possibly IR) */
+ writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
+ readl(base + OHCI_CONTROL);
+
+ /* software reset of the controller, preserving HcFmInterval */
+ if (!no_fminterval)
+ fminterval = readl(base + OHCI_FMINTERVAL);
+
+ writel(OHCI_HCR, base + OHCI_CMDSTATUS);
+
+ /* reset requires max 10 us delay */
+ for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */
+ if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
+ break;
+ udelay(1);
+ }
+
+ if (!no_fminterval)
+ writel(fminterval, base + OHCI_FMINTERVAL);
+
+ /* Now the controller is safely in SUSPEND and nothing can wake it up */
+ iounmap(base);
+}
+
+static const struct dmi_system_id ehci_dmi_nohandoff_table[] = {
+ {
+ /* Pegatron Lucid (ExoPC) */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "EXOPG06411"),
+ DMI_MATCH(DMI_BIOS_VERSION, "Lucid-CE-133"),
+ },
+ },
+ {
+ /* Pegatron Lucid (Ordissimo AIRIS) */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "M11JB"),
+ DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
+ },
+ },
+ {
+ /* Pegatron Lucid (Ordissimo) */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "Ordissimo"),
+ DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
+ },
+ },
+ {
+ /* HASEE E200 */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "HASEE"),
+ DMI_MATCH(DMI_BOARD_NAME, "E210"),
+ DMI_MATCH(DMI_BIOS_VERSION, "6.00"),
+ },
+ },
+ { }
+};
+
+static void ehci_bios_handoff(struct pci_dev *pdev,
+ void __iomem *op_reg_base,
+ u32 cap, u8 offset)
+{
+ int try_handoff = 1, tried_handoff = 0;
+
+ /*
+ * The Pegatron Lucid tablet sporadically waits for 98 seconds trying
+ * the handoff on its unused controller. Skip it.
+ *
+ * The HASEE E200 hangs when the semaphore is set (bugzilla #77021).
+ */
+ if (pdev->vendor == 0x8086 && (pdev->device == 0x283a ||
+ pdev->device == 0x27cc)) {
+ if (dmi_check_system(ehci_dmi_nohandoff_table))
+ try_handoff = 0;
+ }
+
+ if (try_handoff && (cap & EHCI_USBLEGSUP_BIOS)) {
+ dev_dbg(&pdev->dev, "EHCI: BIOS handoff\n");
+
+#if 0
+/* aleksey_gorelov@phoenix.com reports that some systems need SMI forced on,
+ * but that seems dubious in general (the BIOS left it off intentionally)
+ * and is known to prevent some systems from booting. so we won't do this
+ * unless maybe we can determine when we're on a system that needs SMI forced.
+ */
+ /* BIOS workaround (?): be sure the pre-Linux code
+ * receives the SMI
+ */
+ pci_read_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, &val);
+ pci_write_config_dword(pdev, offset + EHCI_USBLEGCTLSTS,
+ val | EHCI_USBLEGCTLSTS_SOOE);
+#endif
+
+ /* some systems get upset if this semaphore is
+ * set for any other reason than forcing a BIOS
+ * handoff..
+ */
+ pci_write_config_byte(pdev, offset + 3, 1);
+ }
+
+ /* if boot firmware now owns EHCI, spin till it hands it over. */
+ if (try_handoff) {
+ int msec = 1000;
+ while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) {
+ tried_handoff = 1;
+ msleep(10);
+ msec -= 10;
+ pci_read_config_dword(pdev, offset, &cap);
+ }
+ }
+
+ if (cap & EHCI_USBLEGSUP_BIOS) {
+ /* well, possibly buggy BIOS... try to shut it down,
+ * and hope nothing goes too wrong
+ */
+ if (try_handoff)
+ dev_warn(&pdev->dev,
+ "EHCI: BIOS handoff failed (BIOS bug?) %08x\n",
+ cap);
+ pci_write_config_byte(pdev, offset + 2, 0);
+ }
+
+ /* just in case, always disable EHCI SMIs */
+ pci_write_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, 0);
+
+ /* If the BIOS ever owned the controller then we can't expect
+ * any power sessions to remain intact.
+ */
+ if (tried_handoff)
+ writel(0, op_reg_base + EHCI_CONFIGFLAG);
+}
+
+static void quirk_usb_disable_ehci(struct pci_dev *pdev)
+{
+ void __iomem *base, *op_reg_base;
+ u32 hcc_params, cap, val;
+ u8 offset, cap_length;
+ int wait_time, count = 256/4;
+
+ if (!mmio_resource_enabled(pdev, 0))
+ return;
+
+ base = pci_ioremap_bar(pdev, 0);
+ if (base == NULL)
+ return;
+
+ cap_length = readb(base);
+ op_reg_base = base + cap_length;
+
+ /* EHCI 0.96 and later may have "extended capabilities"
+ * spec section 5.1 explains the bios handoff, e.g. for
+ * booting from USB disk or using a usb keyboard
+ */
+ hcc_params = readl(base + EHCI_HCC_PARAMS);
+ offset = (hcc_params >> 8) & 0xff;
+ while (offset && --count) {
+ pci_read_config_dword(pdev, offset, &cap);
+
+ switch (cap & 0xff) {
+ case 1:
+ ehci_bios_handoff(pdev, op_reg_base, cap, offset);
+ break;
+ case 0: /* Illegal reserved cap, set cap=0 so we exit */
+ cap = 0;
+ fallthrough;
+ default:
+ dev_warn(&pdev->dev,
+ "EHCI: unrecognized capability %02x\n",
+ cap & 0xff);
+ }
+ offset = (cap >> 8) & 0xff;
+ }
+ if (!count)
+ dev_printk(KERN_DEBUG, &pdev->dev, "EHCI: capability loop?\n");
+
+ /*
+ * halt EHCI & disable its interrupts in any case
+ */
+ val = readl(op_reg_base + EHCI_USBSTS);
+ if ((val & EHCI_USBSTS_HALTED) == 0) {
+ val = readl(op_reg_base + EHCI_USBCMD);
+ val &= ~EHCI_USBCMD_RUN;
+ writel(val, op_reg_base + EHCI_USBCMD);
+
+ wait_time = 2000;
+ do {
+ writel(0x3f, op_reg_base + EHCI_USBSTS);
+ udelay(100);
+ wait_time -= 100;
+ val = readl(op_reg_base + EHCI_USBSTS);
+ if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
+ break;
+ }
+ } while (wait_time > 0);
+ }
+ writel(0, op_reg_base + EHCI_USBINTR);
+ writel(0x3f, op_reg_base + EHCI_USBSTS);
+
+ iounmap(base);
+}
+
+/*
+ * handshake - spin reading a register until handshake completes
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @wait_usec: timeout in microseconds
+ * @delay_usec: delay in microseconds to wait between polling
+ *
+ * Polls a register every delay_usec microseconds.
+ * Returns 0 when the mask bits have the value done.
+ * Returns -ETIMEDOUT if this condition is not true after
+ * wait_usec microseconds have passed.
+ */
+static int handshake(void __iomem *ptr, u32 mask, u32 done,
+ int wait_usec, int delay_usec)
+{
+ u32 result;
+
+ return readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done),
+ delay_usec, wait_usec);
+}
+
+/*
+ * Intel's Panther Point chipset has two host controllers (EHCI and xHCI) that
+ * share some number of ports. These ports can be switched between either
+ * controller. Not all of the ports under the EHCI host controller may be
+ * switchable.
+ *
+ * The ports should be switched over to xHCI before PCI probes for any device
+ * start. This avoids active devices under EHCI being disconnected during the
+ * port switchover, which could cause loss of data on USB storage devices, or
+ * failed boot when the root file system is on a USB mass storage device and is
+ * enumerated under EHCI first.
+ *
+ * We write into the xHC's PCI configuration space in some Intel-specific
+ * registers to switch the ports over. The USB 3.0 terminations and the USB
+ * 2.0 data wires are switched separately. We want to enable the SuperSpeed
+ * terminations before switching the USB 2.0 wires over, so that USB 3.0
+ * devices connect at SuperSpeed, rather than at USB 2.0 speeds.
+ */
+void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev)
+{
+ u32 ports_available;
+ bool ehci_found = false;
+ struct pci_dev *companion = NULL;
+
+ /* Sony VAIO t-series with subsystem device ID 90a8 is not capable of
+ * switching ports from EHCI to xHCI
+ */
+ if (xhci_pdev->subsystem_vendor == PCI_VENDOR_ID_SONY &&
+ xhci_pdev->subsystem_device == 0x90a8)
+ return;
+
+ /* make sure an intel EHCI controller exists */
+ for_each_pci_dev(companion) {
+ if (companion->class == PCI_CLASS_SERIAL_USB_EHCI &&
+ companion->vendor == PCI_VENDOR_ID_INTEL) {
+ ehci_found = true;
+ break;
+ }
+ }
+
+ if (!ehci_found)
+ return;
+
+ /* Don't switchover the ports if the user hasn't compiled the xHCI
+ * driver. Otherwise they will see "dead" USB ports that don't power
+ * the devices.
+ */
+ if (!IS_ENABLED(CONFIG_USB_XHCI_HCD)) {
+ dev_warn(&xhci_pdev->dev,
+ "CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.\n");
+ dev_warn(&xhci_pdev->dev,
+ "USB 3.0 devices will work at USB 2.0 speeds.\n");
+ usb_disable_xhci_ports(xhci_pdev);
+ return;
+ }
+
+ /* Read USB3PRM, the USB 3.0 Port Routing Mask Register
+ * Indicate the ports that can be changed from OS.
+ */
+ pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM,
+ &ports_available);
+
+ dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n",
+ ports_available);
+
+ /* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
+ * Register, to turn on SuperSpeed terminations for the
+ * switchable ports.
+ */
+ pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
+ ports_available);
+
+ pci_read_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
+ &ports_available);
+ dev_dbg(&xhci_pdev->dev,
+ "USB 3.0 ports that are now enabled under xHCI: 0x%x\n",
+ ports_available);
+
+ /* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register
+ * Indicate the USB 2.0 ports to be controlled by the xHCI host.
+ */
+
+ pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM,
+ &ports_available);
+
+ dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n",
+ ports_available);
+
+ /* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
+ * switch the USB 2.0 power and data lines over to the xHCI
+ * host.
+ */
+ pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
+ ports_available);
+
+ pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
+ &ports_available);
+ dev_dbg(&xhci_pdev->dev,
+ "USB 2.0 ports that are now switched over to xHCI: 0x%x\n",
+ ports_available);
+}
+EXPORT_SYMBOL_GPL(usb_enable_intel_xhci_ports);
+
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev)
+{
+ pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0);
+ pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0);
+}
+EXPORT_SYMBOL_GPL(usb_disable_xhci_ports);
+
+/*
+ * PCI Quirks for xHCI.
+ *
+ * Takes care of the handoff between the Pre-OS (i.e. BIOS) and the OS.
+ * It signals to the BIOS that the OS wants control of the host controller,
+ * and then waits 1 second for the BIOS to hand over control.
+ * If we timeout, assume the BIOS is broken and take control anyway.
+ */
+static void quirk_usb_handoff_xhci(struct pci_dev *pdev)
+{
+ void __iomem *base;
+ int ext_cap_offset;
+ void __iomem *op_reg_base;
+ u32 val;
+ int timeout;
+ int len = pci_resource_len(pdev, 0);
+
+ if (!mmio_resource_enabled(pdev, 0))
+ return;
+
+ base = ioremap(pci_resource_start(pdev, 0), len);
+ if (base == NULL)
+ return;
+
+ /*
+ * Find the Legacy Support Capability register -
+ * this is optional for xHCI host controllers.
+ */
+ ext_cap_offset = xhci_find_next_ext_cap(base, 0, XHCI_EXT_CAPS_LEGACY);
+
+ if (!ext_cap_offset)
+ goto hc_init;
+
+ if ((ext_cap_offset + sizeof(val)) > len) {
+ /* We're reading garbage from the controller */
+ dev_warn(&pdev->dev, "xHCI controller failing to respond");
+ goto iounmap;
+ }
+ val = readl(base + ext_cap_offset);
+
+ /* Auto handoff never worked for these devices. Force it and continue */
+ if ((pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) ||
+ (pdev->vendor == PCI_VENDOR_ID_RENESAS
+ && pdev->device == 0x0014)) {
+ val = (val | XHCI_HC_OS_OWNED) & ~XHCI_HC_BIOS_OWNED;
+ writel(val, base + ext_cap_offset);
+ }
+
+ /* If the BIOS owns the HC, signal that the OS wants it, and wait */
+ if (val & XHCI_HC_BIOS_OWNED) {
+ writel(val | XHCI_HC_OS_OWNED, base + ext_cap_offset);
+
+ /* Wait for 1 second with 10 microsecond polling interval */
+ timeout = handshake(base + ext_cap_offset, XHCI_HC_BIOS_OWNED,
+ 0, 1000000, 10);
+
+ /* Assume a buggy BIOS and take HC ownership anyway */
+ if (timeout) {
+ dev_warn(&pdev->dev,
+ "xHCI BIOS handoff failed (BIOS bug ?) %08x\n",
+ val);
+ writel(val & ~XHCI_HC_BIOS_OWNED, base + ext_cap_offset);
+ }
+ }
+
+ val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+ /* Mask off (turn off) any enabled SMIs */
+ val &= XHCI_LEGACY_DISABLE_SMI;
+ /* Mask all SMI events bits, RW1C */
+ val |= XHCI_LEGACY_SMI_EVENTS;
+ /* Disable any BIOS SMIs and clear all SMI events*/
+ writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+
+hc_init:
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+ usb_enable_intel_xhci_ports(pdev);
+
+ op_reg_base = base + XHCI_HC_LENGTH(readl(base));
+
+ /* Wait for the host controller to be ready before writing any
+ * operational or runtime registers. Wait 5 seconds and no more.
+ */
+ timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_CNR, 0,
+ 5000000, 10);
+ /* Assume a buggy HC and start HC initialization anyway */
+ if (timeout) {
+ val = readl(op_reg_base + XHCI_STS_OFFSET);
+ dev_warn(&pdev->dev,
+ "xHCI HW not ready after 5 sec (HC bug?) status = 0x%x\n",
+ val);
+ }
+
+ /* Send the halt and disable interrupts command */
+ val = readl(op_reg_base + XHCI_CMD_OFFSET);
+ val &= ~(XHCI_CMD_RUN | XHCI_IRQS);
+ writel(val, op_reg_base + XHCI_CMD_OFFSET);
+
+ /* Wait for the HC to halt - poll every 125 usec (one microframe). */
+ timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_HALT, 1,
+ XHCI_MAX_HALT_USEC, 125);
+ if (timeout) {
+ val = readl(op_reg_base + XHCI_STS_OFFSET);
+ dev_warn(&pdev->dev,
+ "xHCI HW did not halt within %d usec status = 0x%x\n",
+ XHCI_MAX_HALT_USEC, val);
+ }
+
+iounmap:
+ iounmap(base);
+}
+
+static void quirk_usb_early_handoff(struct pci_dev *pdev)
+{
+ struct device_node *parent;
+ bool is_rpi;
+
+ /* Skip Netlogic mips SoC's internal PCI USB controller.
+ * This device does not need/support EHCI/OHCI handoff
+ */
+ if (pdev->vendor == 0x184e) /* vendor Netlogic */
+ return;
+
+ /*
+ * Bypass the Raspberry Pi 4 controller xHCI controller, things are
+ * taken care of by the board's co-processor.
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
+ parent = of_get_parent(pdev->bus->dev.of_node);
+ is_rpi = of_device_is_compatible(parent, "brcm,bcm2711-pcie");
+ of_node_put(parent);
+ if (is_rpi)
+ return;
+ }
+
+ if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
+ pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
+ pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
+ pdev->class != PCI_CLASS_SERIAL_USB_XHCI)
+ return;
+
+ if (pci_enable_device(pdev) < 0) {
+ dev_warn(&pdev->dev,
+ "Can't enable PCI device, BIOS handoff failed.\n");
+ return;
+ }
+ if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
+ quirk_usb_handoff_uhci(pdev);
+ else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
+ quirk_usb_handoff_ohci(pdev);
+ else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI)
+ quirk_usb_disable_ehci(pdev);
+ else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
+ quirk_usb_handoff_xhci(pdev);
+ pci_disable_device(pdev);
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);