diff options
Diffstat (limited to '')
-rw-r--r-- | drivers/usb/host/uhci-hcd.h | 711 |
1 files changed, 711 insertions, 0 deletions
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h new file mode 100644 index 000000000..0688c3e5b --- /dev/null +++ b/drivers/usb/host/uhci-hcd.h @@ -0,0 +1,711 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LINUX_UHCI_HCD_H +#define __LINUX_UHCI_HCD_H + +#include <linux/list.h> +#include <linux/usb.h> +#include <linux/clk.h> + +#define usb_packetid(pipe) (usb_pipein(pipe) ? USB_PID_IN : USB_PID_OUT) +#define PIPE_DEVEP_MASK 0x0007ff00 + + +/* + * Universal Host Controller Interface data structures and defines + */ + +/* Command register */ +#define USBCMD 0 +#define USBCMD_RS 0x0001 /* Run/Stop */ +#define USBCMD_HCRESET 0x0002 /* Host reset */ +#define USBCMD_GRESET 0x0004 /* Global reset */ +#define USBCMD_EGSM 0x0008 /* Global Suspend Mode */ +#define USBCMD_FGR 0x0010 /* Force Global Resume */ +#define USBCMD_SWDBG 0x0020 /* SW Debug mode */ +#define USBCMD_CF 0x0040 /* Config Flag (sw only) */ +#define USBCMD_MAXP 0x0080 /* Max Packet (0 = 32, 1 = 64) */ + +/* Status register */ +#define USBSTS 2 +#define USBSTS_USBINT 0x0001 /* Interrupt due to IOC */ +#define USBSTS_ERROR 0x0002 /* Interrupt due to error */ +#define USBSTS_RD 0x0004 /* Resume Detect */ +#define USBSTS_HSE 0x0008 /* Host System Error: PCI problems */ +#define USBSTS_HCPE 0x0010 /* Host Controller Process Error: + * the schedule is buggy */ +#define USBSTS_HCH 0x0020 /* HC Halted */ + +/* Interrupt enable register */ +#define USBINTR 4 +#define USBINTR_TIMEOUT 0x0001 /* Timeout/CRC error enable */ +#define USBINTR_RESUME 0x0002 /* Resume interrupt enable */ +#define USBINTR_IOC 0x0004 /* Interrupt On Complete enable */ +#define USBINTR_SP 0x0008 /* Short packet interrupt enable */ + +#define USBFRNUM 6 +#define USBFLBASEADD 8 +#define USBSOF 12 +#define USBSOF_DEFAULT 64 /* Frame length is exactly 1 ms */ + +/* USB port status and control registers */ +#define USBPORTSC1 16 +#define USBPORTSC2 18 +#define USBPORTSC3 20 +#define USBPORTSC4 22 +#define USBPORTSC_CCS 0x0001 /* Current Connect Status + * ("device present") */ +#define USBPORTSC_CSC 0x0002 /* Connect Status Change */ +#define USBPORTSC_PE 0x0004 /* Port Enable */ +#define USBPORTSC_PEC 0x0008 /* Port Enable Change */ +#define USBPORTSC_DPLUS 0x0010 /* D+ high (line status) */ +#define USBPORTSC_DMINUS 0x0020 /* D- high (line status) */ +#define USBPORTSC_RD 0x0040 /* Resume Detect */ +#define USBPORTSC_RES1 0x0080 /* reserved, always 1 */ +#define USBPORTSC_LSDA 0x0100 /* Low Speed Device Attached */ +#define USBPORTSC_PR 0x0200 /* Port Reset */ +/* OC and OCC from Intel 430TX and later (not UHCI 1.1d spec) */ +#define USBPORTSC_OC 0x0400 /* Over Current condition */ +#define USBPORTSC_OCC 0x0800 /* Over Current Change R/WC */ +#define USBPORTSC_SUSP 0x1000 /* Suspend */ +#define USBPORTSC_RES2 0x2000 /* reserved, write zeroes */ +#define USBPORTSC_RES3 0x4000 /* reserved, write zeroes */ +#define USBPORTSC_RES4 0x8000 /* reserved, write zeroes */ + +/* PCI legacy support register */ +#define USBLEGSUP 0xc0 +#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ +#define USBLEGSUP_RWC 0x8f00 /* the R/WC bits */ +#define USBLEGSUP_RO 0x5040 /* R/O and reserved bits */ + +/* PCI Intel-specific resume-enable register */ +#define USBRES_INTEL 0xc4 +#define USBPORT1EN 0x01 +#define USBPORT2EN 0x02 + +#define UHCI_PTR_BITS(uhci) cpu_to_hc32((uhci), 0x000F) +#define UHCI_PTR_TERM(uhci) cpu_to_hc32((uhci), 0x0001) +#define UHCI_PTR_QH(uhci) cpu_to_hc32((uhci), 0x0002) +#define UHCI_PTR_DEPTH(uhci) cpu_to_hc32((uhci), 0x0004) +#define UHCI_PTR_BREADTH(uhci) cpu_to_hc32((uhci), 0x0000) + +#define UHCI_NUMFRAMES 1024 /* in the frame list [array] */ +#define UHCI_MAX_SOF_NUMBER 2047 /* in an SOF packet */ +#define CAN_SCHEDULE_FRAMES 1000 /* how far in the future frames + * can be scheduled */ +#define MAX_PHASE 32 /* Periodic scheduling length */ + +/* When no queues need Full-Speed Bandwidth Reclamation, + * delay this long before turning FSBR off */ +#define FSBR_OFF_DELAY msecs_to_jiffies(10) + +/* If a queue hasn't advanced after this much time, assume it is stuck */ +#define QH_WAIT_TIMEOUT msecs_to_jiffies(200) + + +/* + * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to + * __leXX (normally) or __beXX (given UHCI_BIG_ENDIAN_DESC), depending on + * the host controller implementation. + * + * To facilitate the strongest possible byte-order checking from "sparse" + * and so on, we use __leXX unless that's not practical. + */ +#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_DESC +typedef __u32 __bitwise __hc32; +typedef __u16 __bitwise __hc16; +#else +#define __hc32 __le32 +#define __hc16 __le16 +#endif + +/* + * Queue Headers + */ + +/* + * One role of a QH is to hold a queue of TDs for some endpoint. One QH goes + * with each endpoint, and qh->element (updated by the HC) is either: + * - the next unprocessed TD in the endpoint's queue, or + * - UHCI_PTR_TERM (when there's no more traffic for this endpoint). + * + * The other role of a QH is to serve as a "skeleton" framelist entry, so we + * can easily splice a QH for some endpoint into the schedule at the right + * place. Then qh->element is UHCI_PTR_TERM. + * + * In the schedule, qh->link maintains a list of QHs seen by the HC: + * skel1 --> ep1-qh --> ep2-qh --> ... --> skel2 --> ... + * + * qh->node is the software equivalent of qh->link. The differences + * are that the software list is doubly-linked and QHs in the UNLINKING + * state are on the software list but not the hardware schedule. + * + * For bookkeeping purposes we maintain QHs even for Isochronous endpoints, + * but they never get added to the hardware schedule. + */ +#define QH_STATE_IDLE 1 /* QH is not being used */ +#define QH_STATE_UNLINKING 2 /* QH has been removed from the + * schedule but the hardware may + * still be using it */ +#define QH_STATE_ACTIVE 3 /* QH is on the schedule */ + +struct uhci_qh { + /* Hardware fields */ + __hc32 link; /* Next QH in the schedule */ + __hc32 element; /* Queue element (TD) pointer */ + + /* Software fields */ + dma_addr_t dma_handle; + + struct list_head node; /* Node in the list of QHs */ + struct usb_host_endpoint *hep; /* Endpoint information */ + struct usb_device *udev; + struct list_head queue; /* Queue of urbps for this QH */ + struct uhci_td *dummy_td; /* Dummy TD to end the queue */ + struct uhci_td *post_td; /* Last TD completed */ + + struct usb_iso_packet_descriptor *iso_packet_desc; + /* Next urb->iso_frame_desc entry */ + unsigned long advance_jiffies; /* Time of last queue advance */ + unsigned int unlink_frame; /* When the QH was unlinked */ + unsigned int period; /* For Interrupt and Isochronous QHs */ + short phase; /* Between 0 and period-1 */ + short load; /* Periodic time requirement, in us */ + unsigned int iso_frame; /* Frame # for iso_packet_desc */ + + int state; /* QH_STATE_xxx; see above */ + int type; /* Queue type (control, bulk, etc) */ + int skel; /* Skeleton queue number */ + + unsigned int initial_toggle:1; /* Endpoint's current toggle value */ + unsigned int needs_fixup:1; /* Must fix the TD toggle values */ + unsigned int is_stopped:1; /* Queue was stopped by error/unlink */ + unsigned int wait_expired:1; /* QH_WAIT_TIMEOUT has expired */ + unsigned int bandwidth_reserved:1; /* Periodic bandwidth has + * been allocated */ +} __attribute__((aligned(16))); + +/* + * We need a special accessor for the element pointer because it is + * subject to asynchronous updates by the controller. + */ +#define qh_element(qh) READ_ONCE((qh)->element) + +#define LINK_TO_QH(uhci, qh) (UHCI_PTR_QH((uhci)) | \ + cpu_to_hc32((uhci), (qh)->dma_handle)) + + +/* + * Transfer Descriptors + */ + +/* + * for TD <status>: + */ +#define TD_CTRL_SPD (1 << 29) /* Short Packet Detect */ +#define TD_CTRL_C_ERR_MASK (3 << 27) /* Error Counter bits */ +#define TD_CTRL_C_ERR_SHIFT 27 +#define TD_CTRL_LS (1 << 26) /* Low Speed Device */ +#define TD_CTRL_IOS (1 << 25) /* Isochronous Select */ +#define TD_CTRL_IOC (1 << 24) /* Interrupt on Complete */ +#define TD_CTRL_ACTIVE (1 << 23) /* TD Active */ +#define TD_CTRL_STALLED (1 << 22) /* TD Stalled */ +#define TD_CTRL_DBUFERR (1 << 21) /* Data Buffer Error */ +#define TD_CTRL_BABBLE (1 << 20) /* Babble Detected */ +#define TD_CTRL_NAK (1 << 19) /* NAK Received */ +#define TD_CTRL_CRCTIMEO (1 << 18) /* CRC/Time Out Error */ +#define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */ +#define TD_CTRL_ACTLEN_MASK 0x7FF /* actual length, encoded as n - 1 */ + +#define uhci_maxerr(err) ((err) << TD_CTRL_C_ERR_SHIFT) +#define uhci_status_bits(ctrl_sts) ((ctrl_sts) & 0xF60000) +#define uhci_actual_length(ctrl_sts) (((ctrl_sts) + 1) & \ + TD_CTRL_ACTLEN_MASK) /* 1-based */ + +/* + * for TD <info>: (a.k.a. Token) + */ +#define td_token(uhci, td) hc32_to_cpu((uhci), (td)->token) +#define TD_TOKEN_DEVADDR_SHIFT 8 +#define TD_TOKEN_TOGGLE_SHIFT 19 +#define TD_TOKEN_TOGGLE (1 << 19) +#define TD_TOKEN_EXPLEN_SHIFT 21 +#define TD_TOKEN_EXPLEN_MASK 0x7FF /* expected length, encoded as n-1 */ +#define TD_TOKEN_PID_MASK 0xFF + +#define uhci_explen(len) ((((len) - 1) & TD_TOKEN_EXPLEN_MASK) << \ + TD_TOKEN_EXPLEN_SHIFT) + +#define uhci_expected_length(token) ((((token) >> TD_TOKEN_EXPLEN_SHIFT) + \ + 1) & TD_TOKEN_EXPLEN_MASK) +#define uhci_toggle(token) (((token) >> TD_TOKEN_TOGGLE_SHIFT) & 1) +#define uhci_endpoint(token) (((token) >> 15) & 0xf) +#define uhci_devaddr(token) (((token) >> TD_TOKEN_DEVADDR_SHIFT) & 0x7f) +#define uhci_devep(token) (((token) >> TD_TOKEN_DEVADDR_SHIFT) & 0x7ff) +#define uhci_packetid(token) ((token) & TD_TOKEN_PID_MASK) +#define uhci_packetout(token) (uhci_packetid(token) != USB_PID_IN) +#define uhci_packetin(token) (uhci_packetid(token) == USB_PID_IN) + +/* + * The documentation says "4 words for hardware, 4 words for software". + * + * That's silly, the hardware doesn't care. The hardware only cares that + * the hardware words are 16-byte aligned, and we can have any amount of + * sw space after the TD entry. + * + * td->link points to either another TD (not necessarily for the same urb or + * even the same endpoint), or nothing (PTR_TERM), or a QH. + */ +struct uhci_td { + /* Hardware fields */ + __hc32 link; + __hc32 status; + __hc32 token; + __hc32 buffer; + + /* Software fields */ + dma_addr_t dma_handle; + + struct list_head list; + + int frame; /* for iso: what frame? */ + struct list_head fl_list; +} __attribute__((aligned(16))); + +/* + * We need a special accessor for the control/status word because it is + * subject to asynchronous updates by the controller. + */ +#define td_status(uhci, td) hc32_to_cpu((uhci), \ + READ_ONCE((td)->status)) + +#define LINK_TO_TD(uhci, td) (cpu_to_hc32((uhci), (td)->dma_handle)) + + +/* + * Skeleton Queue Headers + */ + +/* + * The UHCI driver uses QHs with Interrupt, Control and Bulk URBs for + * automatic queuing. To make it easy to insert entries into the schedule, + * we have a skeleton of QHs for each predefined Interrupt latency. + * Asynchronous QHs (low-speed control, full-speed control, and bulk) + * go onto the period-1 interrupt list, since they all get accessed on + * every frame. + * + * When we want to add a new QH, we add it to the list starting from the + * appropriate skeleton QH. For instance, the schedule can look like this: + * + * skel int128 QH + * dev 1 interrupt QH + * dev 5 interrupt QH + * skel int64 QH + * skel int32 QH + * ... + * skel int1 + async QH + * dev 5 low-speed control QH + * dev 1 bulk QH + * dev 2 bulk QH + * + * There is a special terminating QH used to keep full-speed bandwidth + * reclamation active when no full-speed control or bulk QHs are linked + * into the schedule. It has an inactive TD (to work around a PIIX bug, + * see the Intel errata) and it points back to itself. + * + * There's a special skeleton QH for Isochronous QHs which never appears + * on the schedule. Isochronous TDs go on the schedule before the + * skeleton QHs. The hardware accesses them directly rather than + * through their QH, which is used only for bookkeeping purposes. + * While the UHCI spec doesn't forbid the use of QHs for Isochronous, + * it doesn't use them either. And the spec says that queues never + * advance on an error completion status, which makes them totally + * unsuitable for Isochronous transfers. + * + * There's also a special skeleton QH used for QHs which are in the process + * of unlinking and so may still be in use by the hardware. It too never + * appears on the schedule. + */ + +#define UHCI_NUM_SKELQH 11 +#define SKEL_UNLINK 0 +#define skel_unlink_qh skelqh[SKEL_UNLINK] +#define SKEL_ISO 1 +#define skel_iso_qh skelqh[SKEL_ISO] + /* int128, int64, ..., int1 = 2, 3, ..., 9 */ +#define SKEL_INDEX(exponent) (9 - exponent) +#define SKEL_ASYNC 9 +#define skel_async_qh skelqh[SKEL_ASYNC] +#define SKEL_TERM 10 +#define skel_term_qh skelqh[SKEL_TERM] + +/* The following entries refer to sublists of skel_async_qh */ +#define SKEL_LS_CONTROL 20 +#define SKEL_FS_CONTROL 21 +#define SKEL_FSBR SKEL_FS_CONTROL +#define SKEL_BULK 22 + +/* + * The UHCI controller and root hub + */ + +/* + * States for the root hub: + * + * To prevent "bouncing" in the presence of electrical noise, + * when there are no devices attached we delay for 1 second in the + * RUNNING_NODEVS state before switching to the AUTO_STOPPED state. + * + * (Note that the AUTO_STOPPED state won't be necessary once the hub + * driver learns to autosuspend.) + */ +enum uhci_rh_state { + /* In the following states the HC must be halted. + * These two must come first. */ + UHCI_RH_RESET, + UHCI_RH_SUSPENDED, + + UHCI_RH_AUTO_STOPPED, + UHCI_RH_RESUMING, + + /* In this state the HC changes from running to halted, + * so it can legally appear either way. */ + UHCI_RH_SUSPENDING, + + /* In the following states it's an error if the HC is halted. + * These two must come last. */ + UHCI_RH_RUNNING, /* The normal state */ + UHCI_RH_RUNNING_NODEVS, /* Running with no devices attached */ +}; + +/* + * The full UHCI controller information: + */ +struct uhci_hcd { + /* Grabbed from PCI */ + unsigned long io_addr; + + /* Used when registers are memory mapped */ + void __iomem *regs; + + struct dma_pool *qh_pool; + struct dma_pool *td_pool; + + struct uhci_td *term_td; /* Terminating TD, see UHCI bug */ + struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QHs */ + struct uhci_qh *next_qh; /* Next QH to scan */ + + spinlock_t lock; + + dma_addr_t frame_dma_handle; /* Hardware frame list */ + __hc32 *frame; + void **frame_cpu; /* CPU's frame list */ + + enum uhci_rh_state rh_state; + unsigned long auto_stop_time; /* When to AUTO_STOP */ + + unsigned int frame_number; /* As of last check */ + unsigned int is_stopped; +#define UHCI_IS_STOPPED 9999 /* Larger than a frame # */ + unsigned int last_iso_frame; /* Frame of last scan */ + unsigned int cur_iso_frame; /* Frame for current scan */ + + unsigned int scan_in_progress:1; /* Schedule scan is running */ + unsigned int need_rescan:1; /* Redo the schedule scan */ + unsigned int dead:1; /* Controller has died */ + unsigned int RD_enable:1; /* Suspended root hub with + Resume-Detect interrupts + enabled */ + unsigned int is_initialized:1; /* Data structure is usable */ + unsigned int fsbr_is_on:1; /* FSBR is turned on */ + unsigned int fsbr_is_wanted:1; /* Does any URB want FSBR? */ + unsigned int fsbr_expiring:1; /* FSBR is timing out */ + + struct timer_list fsbr_timer; /* For turning off FBSR */ + + /* Silicon quirks */ + unsigned int oc_low:1; /* OverCurrent bit active low */ + unsigned int wait_for_hp:1; /* Wait for HP port reset */ + unsigned int big_endian_mmio:1; /* Big endian registers */ + unsigned int big_endian_desc:1; /* Big endian descriptors */ + unsigned int is_aspeed:1; /* Aspeed impl. workarounds */ + + /* Support for port suspend/resume/reset */ + unsigned long port_c_suspend; /* Bit-arrays of ports */ + unsigned long resuming_ports; + unsigned long ports_timeout; /* Time to stop signalling */ + + struct list_head idle_qh_list; /* Where the idle QHs live */ + + int rh_numports; /* Number of root-hub ports */ + + wait_queue_head_t waitqh; /* endpoint_disable waiters */ + int num_waiting; /* Number of waiters */ + + int total_load; /* Sum of array values */ + short load[MAX_PHASE]; /* Periodic allocations */ + + struct clk *clk; /* (optional) clock source */ + + /* Reset host controller */ + void (*reset_hc) (struct uhci_hcd *uhci); + int (*check_and_reset_hc) (struct uhci_hcd *uhci); + /* configure_hc should perform arch specific settings, if needed */ + void (*configure_hc) (struct uhci_hcd *uhci); + /* Check for broken resume detect interrupts */ + int (*resume_detect_interrupts_are_broken) (struct uhci_hcd *uhci); + /* Check for broken global suspend */ + int (*global_suspend_mode_is_broken) (struct uhci_hcd *uhci); +}; + +/* Convert between a usb_hcd pointer and the corresponding uhci_hcd */ +static inline struct uhci_hcd *hcd_to_uhci(struct usb_hcd *hcd) +{ + return (struct uhci_hcd *) (hcd->hcd_priv); +} +static inline struct usb_hcd *uhci_to_hcd(struct uhci_hcd *uhci) +{ + return container_of((void *) uhci, struct usb_hcd, hcd_priv); +} + +#define uhci_dev(u) (uhci_to_hcd(u)->self.controller) + +/* Utility macro for comparing frame numbers */ +#define uhci_frame_before_eq(f1, f2) (0 <= (int) ((f2) - (f1))) + + +/* + * Private per-URB data + */ +struct urb_priv { + struct list_head node; /* Node in the QH's urbp list */ + + struct urb *urb; + + struct uhci_qh *qh; /* QH for this URB */ + struct list_head td_list; + + unsigned fsbr:1; /* URB wants FSBR */ +}; + + +/* Some special IDs */ + +#define PCI_VENDOR_ID_GENESYS 0x17a0 +#define PCI_DEVICE_ID_GL880S_UHCI 0x8083 + +/* Aspeed SoC needs some quirks */ +static inline bool uhci_is_aspeed(const struct uhci_hcd *uhci) +{ + return IS_ENABLED(CONFIG_USB_UHCI_ASPEED) && uhci->is_aspeed; +} + +/* + * Functions used to access controller registers. The UCHI spec says that host + * controller I/O registers are mapped into PCI I/O space. For non-PCI hosts + * we use memory mapped registers. + */ + +#ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC +/* Support PCI only */ +static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg) +{ + return inl(uhci->io_addr + reg); +} + +static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg) +{ + outl(val, uhci->io_addr + reg); +} + +static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg) +{ + return inw(uhci->io_addr + reg); +} + +static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg) +{ + outw(val, uhci->io_addr + reg); +} + +static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg) +{ + return inb(uhci->io_addr + reg); +} + +static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg) +{ + outb(val, uhci->io_addr + reg); +} + +#else +/* Support non-PCI host controllers */ +#ifdef CONFIG_USB_PCI +/* Support PCI and non-PCI host controllers */ +#define uhci_has_pci_registers(u) ((u)->io_addr != 0) +#else +/* Support non-PCI host controllers only */ +#define uhci_has_pci_registers(u) 0 +#endif + +#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO +/* Support (non-PCI) big endian host controllers */ +#define uhci_big_endian_mmio(u) ((u)->big_endian_mmio) +#else +#define uhci_big_endian_mmio(u) 0 +#endif + +static inline int uhci_aspeed_reg(unsigned int reg) +{ + switch (reg) { + case USBCMD: + return 00; + case USBSTS: + return 0x04; + case USBINTR: + return 0x08; + case USBFRNUM: + return 0x80; + case USBFLBASEADD: + return 0x0c; + case USBSOF: + return 0x84; + case USBPORTSC1: + return 0x88; + case USBPORTSC2: + return 0x8c; + case USBPORTSC3: + return 0x90; + case USBPORTSC4: + return 0x94; + default: + pr_warn("UHCI: Unsupported register 0x%02x on Aspeed\n", reg); + /* Return an unimplemented register */ + return 0x10; + } +} + +static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg) +{ + if (uhci_has_pci_registers(uhci)) + return inl(uhci->io_addr + reg); + else if (uhci_is_aspeed(uhci)) + return readl(uhci->regs + uhci_aspeed_reg(reg)); +#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO + else if (uhci_big_endian_mmio(uhci)) + return readl_be(uhci->regs + reg); +#endif + else + return readl(uhci->regs + reg); +} + +static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg) +{ + if (uhci_has_pci_registers(uhci)) + outl(val, uhci->io_addr + reg); + else if (uhci_is_aspeed(uhci)) + writel(val, uhci->regs + uhci_aspeed_reg(reg)); +#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO + else if (uhci_big_endian_mmio(uhci)) + writel_be(val, uhci->regs + reg); +#endif + else + writel(val, uhci->regs + reg); +} + +static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg) +{ + if (uhci_has_pci_registers(uhci)) + return inw(uhci->io_addr + reg); + else if (uhci_is_aspeed(uhci)) + return readl(uhci->regs + uhci_aspeed_reg(reg)); +#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO + else if (uhci_big_endian_mmio(uhci)) + return readw_be(uhci->regs + reg); +#endif + else + return readw(uhci->regs + reg); +} + +static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg) +{ + if (uhci_has_pci_registers(uhci)) + outw(val, uhci->io_addr + reg); + else if (uhci_is_aspeed(uhci)) + writel(val, uhci->regs + uhci_aspeed_reg(reg)); +#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO + else if (uhci_big_endian_mmio(uhci)) + writew_be(val, uhci->regs + reg); +#endif + else + writew(val, uhci->regs + reg); +} + +static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg) +{ + if (uhci_has_pci_registers(uhci)) + return inb(uhci->io_addr + reg); + else if (uhci_is_aspeed(uhci)) + return readl(uhci->regs + uhci_aspeed_reg(reg)); +#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO + else if (uhci_big_endian_mmio(uhci)) + return readb_be(uhci->regs + reg); +#endif + else + return readb(uhci->regs + reg); +} + +static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg) +{ + if (uhci_has_pci_registers(uhci)) + outb(val, uhci->io_addr + reg); + else if (uhci_is_aspeed(uhci)) + writel(val, uhci->regs + uhci_aspeed_reg(reg)); +#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO + else if (uhci_big_endian_mmio(uhci)) + writeb_be(val, uhci->regs + reg); +#endif + else + writeb(val, uhci->regs + reg); +} +#endif /* CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC */ + +/* + * The GRLIB GRUSBHC controller can use big endian format for its descriptors. + * + * UHCI controllers accessed through PCI work normally (little-endian + * everywhere), so we don't bother supporting a BE-only mode. + */ +#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_DESC +#define uhci_big_endian_desc(u) ((u)->big_endian_desc) + +/* cpu to uhci */ +static inline __hc32 cpu_to_hc32(const struct uhci_hcd *uhci, const u32 x) +{ + return uhci_big_endian_desc(uhci) + ? (__force __hc32)cpu_to_be32(x) + : (__force __hc32)cpu_to_le32(x); +} + +/* uhci to cpu */ +static inline u32 hc32_to_cpu(const struct uhci_hcd *uhci, const __hc32 x) +{ + return uhci_big_endian_desc(uhci) + ? be32_to_cpu((__force __be32)x) + : le32_to_cpu((__force __le32)x); +} + +#else +/* cpu to uhci */ +static inline __hc32 cpu_to_hc32(const struct uhci_hcd *uhci, const u32 x) +{ + return cpu_to_le32(x); +} + +/* uhci to cpu */ +static inline u32 hc32_to_cpu(const struct uhci_hcd *uhci, const __hc32 x) +{ + return le32_to_cpu(x); +} +#endif + +#endif |