summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci.c')
-rw-r--r--drivers/usb/host/xhci.c5574
1 files changed, 5574 insertions, 0 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
new file mode 100644
index 000000000..c02ad4f76
--- /dev/null
+++ b/drivers/usb/host/xhci.c
@@ -0,0 +1,5574 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ */
+
+#include <linux/pci.h>
+#include <linux/iommu.h>
+#include <linux/iopoll.h>
+#include <linux/irq.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/dmi.h>
+#include <linux/dma-mapping.h>
+
+#include "xhci.h"
+#include "xhci-trace.h"
+#include "xhci-debugfs.h"
+#include "xhci-dbgcap.h"
+
+#define DRIVER_AUTHOR "Sarah Sharp"
+#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
+
+#define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
+
+/* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */
+static int link_quirk;
+module_param(link_quirk, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
+
+static unsigned long long quirks;
+module_param(quirks, ullong, S_IRUGO);
+MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
+
+static bool td_on_ring(struct xhci_td *td, struct xhci_ring *ring)
+{
+ struct xhci_segment *seg = ring->first_seg;
+
+ if (!td || !td->start_seg)
+ return false;
+ do {
+ if (seg == td->start_seg)
+ return true;
+ seg = seg->next;
+ } while (seg && seg != ring->first_seg);
+
+ return false;
+}
+
+/*
+ * xhci_handshake - spin reading hc until handshake completes or fails
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @usec: timeout in microseconds
+ *
+ * Returns negative errno, or zero on success
+ *
+ * Success happens when the "mask" bits have the specified value (hardware
+ * handshake done). There are two failure modes: "usec" have passed (major
+ * hardware flakeout), or the register reads as all-ones (hardware removed).
+ */
+int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us)
+{
+ u32 result;
+ int ret;
+
+ ret = readl_poll_timeout_atomic(ptr, result,
+ (result & mask) == done ||
+ result == U32_MAX,
+ 1, timeout_us);
+ if (result == U32_MAX) /* card removed */
+ return -ENODEV;
+
+ return ret;
+}
+
+/*
+ * Disable interrupts and begin the xHCI halting process.
+ */
+void xhci_quiesce(struct xhci_hcd *xhci)
+{
+ u32 halted;
+ u32 cmd;
+ u32 mask;
+
+ mask = ~(XHCI_IRQS);
+ halted = readl(&xhci->op_regs->status) & STS_HALT;
+ if (!halted)
+ mask &= ~CMD_RUN;
+
+ cmd = readl(&xhci->op_regs->command);
+ cmd &= mask;
+ writel(cmd, &xhci->op_regs->command);
+}
+
+/*
+ * Force HC into halt state.
+ *
+ * Disable any IRQs and clear the run/stop bit.
+ * HC will complete any current and actively pipelined transactions, and
+ * should halt within 16 ms of the run/stop bit being cleared.
+ * Read HC Halted bit in the status register to see when the HC is finished.
+ */
+int xhci_halt(struct xhci_hcd *xhci)
+{
+ int ret;
+
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Halt the HC");
+ xhci_quiesce(xhci);
+
+ ret = xhci_handshake(&xhci->op_regs->status,
+ STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
+ if (ret) {
+ xhci_warn(xhci, "Host halt failed, %d\n", ret);
+ return ret;
+ }
+
+ xhci->xhc_state |= XHCI_STATE_HALTED;
+ xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+
+ return ret;
+}
+
+/*
+ * Set the run bit and wait for the host to be running.
+ */
+int xhci_start(struct xhci_hcd *xhci)
+{
+ u32 temp;
+ int ret;
+
+ temp = readl(&xhci->op_regs->command);
+ temp |= (CMD_RUN);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Turn on HC, cmd = 0x%x.",
+ temp);
+ writel(temp, &xhci->op_regs->command);
+
+ /*
+ * Wait for the HCHalted Status bit to be 0 to indicate the host is
+ * running.
+ */
+ ret = xhci_handshake(&xhci->op_regs->status,
+ STS_HALT, 0, XHCI_MAX_HALT_USEC);
+ if (ret == -ETIMEDOUT)
+ xhci_err(xhci, "Host took too long to start, "
+ "waited %u microseconds.\n",
+ XHCI_MAX_HALT_USEC);
+ if (!ret) {
+ /* clear state flags. Including dying, halted or removing */
+ xhci->xhc_state = 0;
+ xhci->run_graceperiod = jiffies + msecs_to_jiffies(500);
+ }
+
+ return ret;
+}
+
+/*
+ * Reset a halted HC.
+ *
+ * This resets pipelines, timers, counters, state machines, etc.
+ * Transactions will be terminated immediately, and operational registers
+ * will be set to their defaults.
+ */
+int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us)
+{
+ u32 command;
+ u32 state;
+ int ret;
+
+ state = readl(&xhci->op_regs->status);
+
+ if (state == ~(u32)0) {
+ xhci_warn(xhci, "Host not accessible, reset failed.\n");
+ return -ENODEV;
+ }
+
+ if ((state & STS_HALT) == 0) {
+ xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
+ return 0;
+ }
+
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Reset the HC");
+ command = readl(&xhci->op_regs->command);
+ command |= CMD_RESET;
+ writel(command, &xhci->op_regs->command);
+
+ /* Existing Intel xHCI controllers require a delay of 1 mS,
+ * after setting the CMD_RESET bit, and before accessing any
+ * HC registers. This allows the HC to complete the
+ * reset operation and be ready for HC register access.
+ * Without this delay, the subsequent HC register access,
+ * may result in a system hang very rarely.
+ */
+ if (xhci->quirks & XHCI_INTEL_HOST)
+ udelay(1000);
+
+ ret = xhci_handshake(&xhci->op_regs->command, CMD_RESET, 0, timeout_us);
+ if (ret)
+ return ret;
+
+ if (xhci->quirks & XHCI_ASMEDIA_MODIFY_FLOWCONTROL)
+ usb_asmedia_modifyflowcontrol(to_pci_dev(xhci_to_hcd(xhci)->self.controller));
+
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "Wait for controller to be ready for doorbell rings");
+ /*
+ * xHCI cannot write to any doorbells or operational registers other
+ * than status until the "Controller Not Ready" flag is cleared.
+ */
+ ret = xhci_handshake(&xhci->op_regs->status, STS_CNR, 0, timeout_us);
+
+ xhci->usb2_rhub.bus_state.port_c_suspend = 0;
+ xhci->usb2_rhub.bus_state.suspended_ports = 0;
+ xhci->usb2_rhub.bus_state.resuming_ports = 0;
+ xhci->usb3_rhub.bus_state.port_c_suspend = 0;
+ xhci->usb3_rhub.bus_state.suspended_ports = 0;
+ xhci->usb3_rhub.bus_state.resuming_ports = 0;
+
+ return ret;
+}
+
+static void xhci_zero_64b_regs(struct xhci_hcd *xhci)
+{
+ struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+ struct iommu_domain *domain;
+ int err, i;
+ u64 val;
+ u32 intrs;
+
+ /*
+ * Some Renesas controllers get into a weird state if they are
+ * reset while programmed with 64bit addresses (they will preserve
+ * the top half of the address in internal, non visible
+ * registers). You end up with half the address coming from the
+ * kernel, and the other half coming from the firmware. Also,
+ * changing the programming leads to extra accesses even if the
+ * controller is supposed to be halted. The controller ends up with
+ * a fatal fault, and is then ripe for being properly reset.
+ *
+ * Special care is taken to only apply this if the device is behind
+ * an iommu. Doing anything when there is no iommu is definitely
+ * unsafe...
+ */
+ domain = iommu_get_domain_for_dev(dev);
+ if (!(xhci->quirks & XHCI_ZERO_64B_REGS) || !domain ||
+ domain->type == IOMMU_DOMAIN_IDENTITY)
+ return;
+
+ xhci_info(xhci, "Zeroing 64bit base registers, expecting fault\n");
+
+ /* Clear HSEIE so that faults do not get signaled */
+ val = readl(&xhci->op_regs->command);
+ val &= ~CMD_HSEIE;
+ writel(val, &xhci->op_regs->command);
+
+ /* Clear HSE (aka FATAL) */
+ val = readl(&xhci->op_regs->status);
+ val |= STS_FATAL;
+ writel(val, &xhci->op_regs->status);
+
+ /* Now zero the registers, and brace for impact */
+ val = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+ if (upper_32_bits(val))
+ xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
+ val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+ if (upper_32_bits(val))
+ xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
+
+ intrs = min_t(u32, HCS_MAX_INTRS(xhci->hcs_params1),
+ ARRAY_SIZE(xhci->run_regs->ir_set));
+
+ for (i = 0; i < intrs; i++) {
+ struct xhci_intr_reg __iomem *ir;
+
+ ir = &xhci->run_regs->ir_set[i];
+ val = xhci_read_64(xhci, &ir->erst_base);
+ if (upper_32_bits(val))
+ xhci_write_64(xhci, 0, &ir->erst_base);
+ val= xhci_read_64(xhci, &ir->erst_dequeue);
+ if (upper_32_bits(val))
+ xhci_write_64(xhci, 0, &ir->erst_dequeue);
+ }
+
+ /* Wait for the fault to appear. It will be cleared on reset */
+ err = xhci_handshake(&xhci->op_regs->status,
+ STS_FATAL, STS_FATAL,
+ XHCI_MAX_HALT_USEC);
+ if (!err)
+ xhci_info(xhci, "Fault detected\n");
+}
+
+#ifdef CONFIG_USB_PCI
+/*
+ * Set up MSI
+ */
+static int xhci_setup_msi(struct xhci_hcd *xhci)
+{
+ int ret;
+ /*
+ * TODO:Check with MSI Soc for sysdev
+ */
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
+ if (ret < 0) {
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "failed to allocate MSI entry");
+ return ret;
+ }
+
+ ret = request_irq(pdev->irq, xhci_msi_irq,
+ 0, "xhci_hcd", xhci_to_hcd(xhci));
+ if (ret) {
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "disable MSI interrupt");
+ pci_free_irq_vectors(pdev);
+ }
+
+ return ret;
+}
+
+/*
+ * Set up MSI-X
+ */
+static int xhci_setup_msix(struct xhci_hcd *xhci)
+{
+ int i, ret;
+ struct usb_hcd *hcd = xhci_to_hcd(xhci);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+ /*
+ * calculate number of msi-x vectors supported.
+ * - HCS_MAX_INTRS: the max number of interrupts the host can handle,
+ * with max number of interrupters based on the xhci HCSPARAMS1.
+ * - num_online_cpus: maximum msi-x vectors per CPUs core.
+ * Add additional 1 vector to ensure always available interrupt.
+ */
+ xhci->msix_count = min(num_online_cpus() + 1,
+ HCS_MAX_INTRS(xhci->hcs_params1));
+
+ ret = pci_alloc_irq_vectors(pdev, xhci->msix_count, xhci->msix_count,
+ PCI_IRQ_MSIX);
+ if (ret < 0) {
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "Failed to enable MSI-X");
+ return ret;
+ }
+
+ for (i = 0; i < xhci->msix_count; i++) {
+ ret = request_irq(pci_irq_vector(pdev, i), xhci_msi_irq, 0,
+ "xhci_hcd", xhci_to_hcd(xhci));
+ if (ret)
+ goto disable_msix;
+ }
+
+ hcd->msix_enabled = 1;
+ return ret;
+
+disable_msix:
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init, "disable MSI-X interrupt");
+ while (--i >= 0)
+ free_irq(pci_irq_vector(pdev, i), xhci_to_hcd(xhci));
+ pci_free_irq_vectors(pdev);
+ return ret;
+}
+
+/* Free any IRQs and disable MSI-X */
+static void xhci_cleanup_msix(struct xhci_hcd *xhci)
+{
+ struct usb_hcd *hcd = xhci_to_hcd(xhci);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+ if (xhci->quirks & XHCI_PLAT)
+ return;
+
+ /* return if using legacy interrupt */
+ if (hcd->irq > 0)
+ return;
+
+ if (hcd->msix_enabled) {
+ int i;
+
+ for (i = 0; i < xhci->msix_count; i++)
+ free_irq(pci_irq_vector(pdev, i), xhci_to_hcd(xhci));
+ } else {
+ free_irq(pci_irq_vector(pdev, 0), xhci_to_hcd(xhci));
+ }
+
+ pci_free_irq_vectors(pdev);
+ hcd->msix_enabled = 0;
+}
+
+static void __maybe_unused xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+{
+ struct usb_hcd *hcd = xhci_to_hcd(xhci);
+
+ if (hcd->msix_enabled) {
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ int i;
+
+ for (i = 0; i < xhci->msix_count; i++)
+ synchronize_irq(pci_irq_vector(pdev, i));
+ }
+}
+
+static int xhci_try_enable_msi(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev;
+ int ret;
+
+ /* The xhci platform device has set up IRQs through usb_add_hcd. */
+ if (xhci->quirks & XHCI_PLAT)
+ return 0;
+
+ pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+ /*
+ * Some Fresco Logic host controllers advertise MSI, but fail to
+ * generate interrupts. Don't even try to enable MSI.
+ */
+ if (xhci->quirks & XHCI_BROKEN_MSI)
+ goto legacy_irq;
+
+ /* unregister the legacy interrupt */
+ if (hcd->irq)
+ free_irq(hcd->irq, hcd);
+ hcd->irq = 0;
+
+ ret = xhci_setup_msix(xhci);
+ if (ret)
+ /* fall back to msi*/
+ ret = xhci_setup_msi(xhci);
+
+ if (!ret) {
+ hcd->msi_enabled = 1;
+ return 0;
+ }
+
+ if (!pdev->irq) {
+ xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
+ return -EINVAL;
+ }
+
+ legacy_irq:
+ if (!strlen(hcd->irq_descr))
+ snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
+ hcd->driver->description, hcd->self.busnum);
+
+ /* fall back to legacy interrupt*/
+ ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
+ hcd->irq_descr, hcd);
+ if (ret) {
+ xhci_err(xhci, "request interrupt %d failed\n",
+ pdev->irq);
+ return ret;
+ }
+ hcd->irq = pdev->irq;
+ return 0;
+}
+
+#else
+
+static inline int xhci_try_enable_msi(struct usb_hcd *hcd)
+{
+ return 0;
+}
+
+static inline void xhci_cleanup_msix(struct xhci_hcd *xhci)
+{
+}
+
+static inline void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+{
+}
+
+#endif
+
+static void compliance_mode_recovery(struct timer_list *t)
+{
+ struct xhci_hcd *xhci;
+ struct usb_hcd *hcd;
+ struct xhci_hub *rhub;
+ u32 temp;
+ int i;
+
+ xhci = from_timer(xhci, t, comp_mode_recovery_timer);
+ rhub = &xhci->usb3_rhub;
+ hcd = rhub->hcd;
+
+ if (!hcd)
+ return;
+
+ for (i = 0; i < rhub->num_ports; i++) {
+ temp = readl(rhub->ports[i]->addr);
+ if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
+ /*
+ * Compliance Mode Detected. Letting USB Core
+ * handle the Warm Reset
+ */
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "Compliance mode detected->port %d",
+ i + 1);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "Attempting compliance mode recovery");
+
+ if (hcd->state == HC_STATE_SUSPENDED)
+ usb_hcd_resume_root_hub(hcd);
+
+ usb_hcd_poll_rh_status(hcd);
+ }
+ }
+
+ if (xhci->port_status_u0 != ((1 << rhub->num_ports) - 1))
+ mod_timer(&xhci->comp_mode_recovery_timer,
+ jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+}
+
+/*
+ * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver
+ * that causes ports behind that hardware to enter compliance mode sometimes.
+ * The quirk creates a timer that polls every 2 seconds the link state of
+ * each host controller's port and recovers it by issuing a Warm reset
+ * if Compliance mode is detected, otherwise the port will become "dead" (no
+ * device connections or disconnections will be detected anymore). Becasue no
+ * status event is generated when entering compliance mode (per xhci spec),
+ * this quirk is needed on systems that have the failing hardware installed.
+ */
+static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
+{
+ xhci->port_status_u0 = 0;
+ timer_setup(&xhci->comp_mode_recovery_timer, compliance_mode_recovery,
+ 0);
+ xhci->comp_mode_recovery_timer.expires = jiffies +
+ msecs_to_jiffies(COMP_MODE_RCVRY_MSECS);
+
+ add_timer(&xhci->comp_mode_recovery_timer);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "Compliance mode recovery timer initialized");
+}
+
+/*
+ * This function identifies the systems that have installed the SN65LVPE502CP
+ * USB3.0 re-driver and that need the Compliance Mode Quirk.
+ * Systems:
+ * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
+ */
+static bool xhci_compliance_mode_recovery_timer_quirk_check(void)
+{
+ const char *dmi_product_name, *dmi_sys_vendor;
+
+ dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+ dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ if (!dmi_product_name || !dmi_sys_vendor)
+ return false;
+
+ if (!(strstr(dmi_sys_vendor, "Hewlett-Packard")))
+ return false;
+
+ if (strstr(dmi_product_name, "Z420") ||
+ strstr(dmi_product_name, "Z620") ||
+ strstr(dmi_product_name, "Z820") ||
+ strstr(dmi_product_name, "Z1 Workstation"))
+ return true;
+
+ return false;
+}
+
+static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci)
+{
+ return (xhci->port_status_u0 == ((1 << xhci->usb3_rhub.num_ports) - 1));
+}
+
+
+/*
+ * Initialize memory for HCD and xHC (one-time init).
+ *
+ * Program the PAGESIZE register, initialize the device context array, create
+ * device contexts (?), set up a command ring segment (or two?), create event
+ * ring (one for now).
+ */
+static int xhci_init(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ int retval;
+
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_init");
+ spin_lock_init(&xhci->lock);
+ if (xhci->hci_version == 0x95 && link_quirk) {
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "QUIRK: Not clearing Link TRB chain bits.");
+ xhci->quirks |= XHCI_LINK_TRB_QUIRK;
+ } else {
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "xHCI doesn't need link TRB QUIRK");
+ }
+ retval = xhci_mem_init(xhci, GFP_KERNEL);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init");
+
+ /* Initializing Compliance Mode Recovery Data If Needed */
+ if (xhci_compliance_mode_recovery_timer_quirk_check()) {
+ xhci->quirks |= XHCI_COMP_MODE_QUIRK;
+ compliance_mode_recovery_timer_init(xhci);
+ }
+
+ return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+
+static int xhci_run_finished(struct xhci_hcd *xhci)
+{
+ unsigned long flags;
+ u32 temp;
+
+ /*
+ * Enable interrupts before starting the host (xhci 4.2 and 5.5.2).
+ * Protect the short window before host is running with a lock
+ */
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Enable interrupts");
+ temp = readl(&xhci->op_regs->command);
+ temp |= (CMD_EIE);
+ writel(temp, &xhci->op_regs->command);
+
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Enable primary interrupter");
+ temp = readl(&xhci->ir_set->irq_pending);
+ writel(ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending);
+
+ if (xhci_start(xhci)) {
+ xhci_halt(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return -ENODEV;
+ }
+
+ xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
+
+ if (xhci->quirks & XHCI_NEC_HOST)
+ xhci_ring_cmd_db(xhci);
+
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ return 0;
+}
+
+/*
+ * Start the HC after it was halted.
+ *
+ * This function is called by the USB core when the HC driver is added.
+ * Its opposite is xhci_stop().
+ *
+ * xhci_init() must be called once before this function can be called.
+ * Reset the HC, enable device slot contexts, program DCBAAP, and
+ * set command ring pointer and event ring pointer.
+ *
+ * Setup MSI-X vectors and enable interrupts.
+ */
+int xhci_run(struct usb_hcd *hcd)
+{
+ u32 temp;
+ u64 temp_64;
+ int ret;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+ /* Start the xHCI host controller running only after the USB 2.0 roothub
+ * is setup.
+ */
+
+ hcd->uses_new_polling = 1;
+ if (!usb_hcd_is_primary_hcd(hcd))
+ return xhci_run_finished(xhci);
+
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_run");
+
+ ret = xhci_try_enable_msi(hcd);
+ if (ret)
+ return ret;
+
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ temp_64 &= ~ERST_PTR_MASK;
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "ERST deq = 64'h%0lx", (long unsigned int) temp_64);
+
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "// Set the interrupt modulation register");
+ temp = readl(&xhci->ir_set->irq_control);
+ temp &= ~ER_IRQ_INTERVAL_MASK;
+ temp |= (xhci->imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
+ writel(temp, &xhci->ir_set->irq_control);
+
+ if (xhci->quirks & XHCI_NEC_HOST) {
+ struct xhci_command *command;
+
+ command = xhci_alloc_command(xhci, false, GFP_KERNEL);
+ if (!command)
+ return -ENOMEM;
+
+ ret = xhci_queue_vendor_command(xhci, command, 0, 0, 0,
+ TRB_TYPE(TRB_NEC_GET_FW));
+ if (ret)
+ xhci_free_command(xhci, command);
+ }
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "Finished %s for main hcd", __func__);
+
+ xhci_create_dbc_dev(xhci);
+
+ xhci_debugfs_init(xhci);
+
+ if (xhci_has_one_roothub(xhci))
+ return xhci_run_finished(xhci);
+
+ set_bit(HCD_FLAG_DEFER_RH_REGISTER, &hcd->flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(xhci_run);
+
+/*
+ * Stop xHCI driver.
+ *
+ * This function is called by the USB core when the HC driver is removed.
+ * Its opposite is xhci_run().
+ *
+ * Disable device contexts, disable IRQs, and quiesce the HC.
+ * Reset the HC, finish any completed transactions, and cleanup memory.
+ */
+static void xhci_stop(struct usb_hcd *hcd)
+{
+ u32 temp;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+ mutex_lock(&xhci->mutex);
+
+ /* Only halt host and free memory after both hcds are removed */
+ if (!usb_hcd_is_primary_hcd(hcd)) {
+ mutex_unlock(&xhci->mutex);
+ return;
+ }
+
+ xhci_remove_dbc_dev(xhci);
+
+ spin_lock_irq(&xhci->lock);
+ xhci->xhc_state |= XHCI_STATE_HALTED;
+ xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+ xhci_halt(xhci);
+ xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
+ spin_unlock_irq(&xhci->lock);
+
+ xhci_cleanup_msix(xhci);
+
+ /* Deleting Compliance Mode Recovery Timer */
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ (!(xhci_all_ports_seen_u0(xhci)))) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "%s: compliance mode recovery timer deleted",
+ __func__);
+ }
+
+ if (xhci->quirks & XHCI_AMD_PLL_FIX)
+ usb_amd_dev_put();
+
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "// Disabling event ring interrupts");
+ temp = readl(&xhci->op_regs->status);
+ writel((temp & ~0x1fff) | STS_EINT, &xhci->op_regs->status);
+ temp = readl(&xhci->ir_set->irq_pending);
+ writel(ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending);
+
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init, "cleaning up memory");
+ xhci_mem_cleanup(xhci);
+ xhci_debugfs_exit(xhci);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "xhci_stop completed - status = %x",
+ readl(&xhci->op_regs->status));
+ mutex_unlock(&xhci->mutex);
+}
+
+/*
+ * Shutdown HC (not bus-specific)
+ *
+ * This is called when the machine is rebooting or halting. We assume that the
+ * machine will be powered off, and the HC's internal state will be reset.
+ * Don't bother to free memory.
+ *
+ * This will only ever be called with the main usb_hcd (the USB3 roothub).
+ */
+void xhci_shutdown(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+ if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
+ usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev));
+
+ /* Don't poll the roothubs after shutdown. */
+ xhci_dbg(xhci, "%s: stopping usb%d port polling.\n",
+ __func__, hcd->self.busnum);
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ del_timer_sync(&hcd->rh_timer);
+
+ if (xhci->shared_hcd) {
+ clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+ del_timer_sync(&xhci->shared_hcd->rh_timer);
+ }
+
+ spin_lock_irq(&xhci->lock);
+ xhci_halt(xhci);
+
+ /*
+ * Workaround for spurious wakeps at shutdown with HSW, and for boot
+ * firmware delay in ADL-P PCH if port are left in U3 at shutdown
+ */
+ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP ||
+ xhci->quirks & XHCI_RESET_TO_DEFAULT)
+ xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
+
+ spin_unlock_irq(&xhci->lock);
+
+ xhci_cleanup_msix(xhci);
+
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "xhci_shutdown completed - status = %x",
+ readl(&xhci->op_regs->status));
+}
+EXPORT_SYMBOL_GPL(xhci_shutdown);
+
+#ifdef CONFIG_PM
+static void xhci_save_registers(struct xhci_hcd *xhci)
+{
+ xhci->s3.command = readl(&xhci->op_regs->command);
+ xhci->s3.dev_nt = readl(&xhci->op_regs->dev_notification);
+ xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+ xhci->s3.config_reg = readl(&xhci->op_regs->config_reg);
+ xhci->s3.erst_size = readl(&xhci->ir_set->erst_size);
+ xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
+ xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci->s3.irq_pending = readl(&xhci->ir_set->irq_pending);
+ xhci->s3.irq_control = readl(&xhci->ir_set->irq_control);
+}
+
+static void xhci_restore_registers(struct xhci_hcd *xhci)
+{
+ writel(xhci->s3.command, &xhci->op_regs->command);
+ writel(xhci->s3.dev_nt, &xhci->op_regs->dev_notification);
+ xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
+ writel(xhci->s3.config_reg, &xhci->op_regs->config_reg);
+ writel(xhci->s3.erst_size, &xhci->ir_set->erst_size);
+ xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
+ xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue);
+ writel(xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
+ writel(xhci->s3.irq_control, &xhci->ir_set->irq_control);
+}
+
+static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
+{
+ u64 val_64;
+
+ /* step 2: initialize command ring buffer */
+ val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+ val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+ (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+ xhci->cmd_ring->dequeue) &
+ (u64) ~CMD_RING_RSVD_BITS) |
+ xhci->cmd_ring->cycle_state;
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "// Setting command ring address to 0x%llx",
+ (long unsigned long) val_64);
+ xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+}
+
+/*
+ * The whole command ring must be cleared to zero when we suspend the host.
+ *
+ * The host doesn't save the command ring pointer in the suspend well, so we
+ * need to re-program it on resume. Unfortunately, the pointer must be 64-byte
+ * aligned, because of the reserved bits in the command ring dequeue pointer
+ * register. Therefore, we can't just set the dequeue pointer back in the
+ * middle of the ring (TRBs are 16-byte aligned).
+ */
+static void xhci_clear_command_ring(struct xhci_hcd *xhci)
+{
+ struct xhci_ring *ring;
+ struct xhci_segment *seg;
+
+ ring = xhci->cmd_ring;
+ seg = ring->deq_seg;
+ do {
+ memset(seg->trbs, 0,
+ sizeof(union xhci_trb) * (TRBS_PER_SEGMENT - 1));
+ seg->trbs[TRBS_PER_SEGMENT - 1].link.control &=
+ cpu_to_le32(~TRB_CYCLE);
+ seg = seg->next;
+ } while (seg != ring->deq_seg);
+
+ /* Reset the software enqueue and dequeue pointers */
+ ring->deq_seg = ring->first_seg;
+ ring->dequeue = ring->first_seg->trbs;
+ ring->enq_seg = ring->deq_seg;
+ ring->enqueue = ring->dequeue;
+
+ ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1;
+ /*
+ * Ring is now zeroed, so the HW should look for change of ownership
+ * when the cycle bit is set to 1.
+ */
+ ring->cycle_state = 1;
+
+ /*
+ * Reset the hardware dequeue pointer.
+ * Yes, this will need to be re-written after resume, but we're paranoid
+ * and want to make sure the hardware doesn't access bogus memory
+ * because, say, the BIOS or an SMI started the host without changing
+ * the command ring pointers.
+ */
+ xhci_set_cmd_ring_deq(xhci);
+}
+
+/*
+ * Disable port wake bits if do_wakeup is not set.
+ *
+ * Also clear a possible internal port wake state left hanging for ports that
+ * detected termination but never successfully enumerated (trained to 0U).
+ * Internal wake causes immediate xHCI wake after suspend. PORT_CSC write done
+ * at enumeration clears this wake, force one here as well for unconnected ports
+ */
+
+static void xhci_disable_hub_port_wake(struct xhci_hcd *xhci,
+ struct xhci_hub *rhub,
+ bool do_wakeup)
+{
+ unsigned long flags;
+ u32 t1, t2, portsc;
+ int i;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ for (i = 0; i < rhub->num_ports; i++) {
+ portsc = readl(rhub->ports[i]->addr);
+ t1 = xhci_port_state_to_neutral(portsc);
+ t2 = t1;
+
+ /* clear wake bits if do_wake is not set */
+ if (!do_wakeup)
+ t2 &= ~PORT_WAKE_BITS;
+
+ /* Don't touch csc bit if connected or connect change is set */
+ if (!(portsc & (PORT_CSC | PORT_CONNECT)))
+ t2 |= PORT_CSC;
+
+ if (t1 != t2) {
+ writel(t2, rhub->ports[i]->addr);
+ xhci_dbg(xhci, "config port %d-%d wake bits, portsc: 0x%x, write: 0x%x\n",
+ rhub->hcd->self.busnum, i + 1, portsc, t2);
+ }
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
+static bool xhci_pending_portevent(struct xhci_hcd *xhci)
+{
+ struct xhci_port **ports;
+ int port_index;
+ u32 status;
+ u32 portsc;
+
+ status = readl(&xhci->op_regs->status);
+ if (status & STS_EINT)
+ return true;
+ /*
+ * Checking STS_EINT is not enough as there is a lag between a change
+ * bit being set and the Port Status Change Event that it generated
+ * being written to the Event Ring. See note in xhci 1.1 section 4.19.2.
+ */
+
+ port_index = xhci->usb2_rhub.num_ports;
+ ports = xhci->usb2_rhub.ports;
+ while (port_index--) {
+ portsc = readl(ports[port_index]->addr);
+ if (portsc & PORT_CHANGE_MASK ||
+ (portsc & PORT_PLS_MASK) == XDEV_RESUME)
+ return true;
+ }
+ port_index = xhci->usb3_rhub.num_ports;
+ ports = xhci->usb3_rhub.ports;
+ while (port_index--) {
+ portsc = readl(ports[port_index]->addr);
+ if (portsc & PORT_CHANGE_MASK ||
+ (portsc & PORT_PLS_MASK) == XDEV_RESUME)
+ return true;
+ }
+ return false;
+}
+
+/*
+ * Stop HC (not bus-specific)
+ *
+ * This is called when the machine transition into S3/S4 mode.
+ *
+ */
+int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
+{
+ int rc = 0;
+ unsigned int delay = XHCI_MAX_HALT_USEC * 2;
+ struct usb_hcd *hcd = xhci_to_hcd(xhci);
+ u32 command;
+ u32 res;
+
+ if (!hcd->state)
+ return 0;
+
+ if (hcd->state != HC_STATE_SUSPENDED ||
+ (xhci->shared_hcd && xhci->shared_hcd->state != HC_STATE_SUSPENDED))
+ return -EINVAL;
+
+ /* Clear root port wake on bits if wakeup not allowed. */
+ xhci_disable_hub_port_wake(xhci, &xhci->usb3_rhub, do_wakeup);
+ xhci_disable_hub_port_wake(xhci, &xhci->usb2_rhub, do_wakeup);
+
+ if (!HCD_HW_ACCESSIBLE(hcd))
+ return 0;
+
+ xhci_dbc_suspend(xhci);
+
+ /* Don't poll the roothubs on bus suspend. */
+ xhci_dbg(xhci, "%s: stopping usb%d port polling.\n",
+ __func__, hcd->self.busnum);
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ del_timer_sync(&hcd->rh_timer);
+ if (xhci->shared_hcd) {
+ clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+ del_timer_sync(&xhci->shared_hcd->rh_timer);
+ }
+
+ if (xhci->quirks & XHCI_SUSPEND_DELAY)
+ usleep_range(1000, 1500);
+
+ spin_lock_irq(&xhci->lock);
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ if (xhci->shared_hcd)
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
+ /* step 1: stop endpoint */
+ /* skipped assuming that port suspend has done */
+
+ /* step 2: clear Run/Stop bit */
+ command = readl(&xhci->op_regs->command);
+ command &= ~CMD_RUN;
+ writel(command, &xhci->op_regs->command);
+
+ /* Some chips from Fresco Logic need an extraordinary delay */
+ delay *= (xhci->quirks & XHCI_SLOW_SUSPEND) ? 10 : 1;
+
+ if (xhci_handshake(&xhci->op_regs->status,
+ STS_HALT, STS_HALT, delay)) {
+ xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n");
+ spin_unlock_irq(&xhci->lock);
+ return -ETIMEDOUT;
+ }
+ xhci_clear_command_ring(xhci);
+
+ /* step 3: save registers */
+ xhci_save_registers(xhci);
+
+ /* step 4: set CSS flag */
+ command = readl(&xhci->op_regs->command);
+ command |= CMD_CSS;
+ writel(command, &xhci->op_regs->command);
+ xhci->broken_suspend = 0;
+ if (xhci_handshake(&xhci->op_regs->status,
+ STS_SAVE, 0, 20 * 1000)) {
+ /*
+ * AMD SNPS xHC 3.0 occasionally does not clear the
+ * SSS bit of USBSTS and when driver tries to poll
+ * to see if the xHC clears BIT(8) which never happens
+ * and driver assumes that controller is not responding
+ * and times out. To workaround this, its good to check
+ * if SRE and HCE bits are not set (as per xhci
+ * Section 5.4.2) and bypass the timeout.
+ */
+ res = readl(&xhci->op_regs->status);
+ if ((xhci->quirks & XHCI_SNPS_BROKEN_SUSPEND) &&
+ (((res & STS_SRE) == 0) &&
+ ((res & STS_HCE) == 0))) {
+ xhci->broken_suspend = 1;
+ } else {
+ xhci_warn(xhci, "WARN: xHC save state timeout\n");
+ spin_unlock_irq(&xhci->lock);
+ return -ETIMEDOUT;
+ }
+ }
+ spin_unlock_irq(&xhci->lock);
+
+ /*
+ * Deleting Compliance Mode Recovery Timer because the xHCI Host
+ * is about to be suspended.
+ */
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ (!(xhci_all_ports_seen_u0(xhci)))) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "%s: compliance mode recovery timer deleted",
+ __func__);
+ }
+
+ /* step 5: remove core well power */
+ /* synchronize irq when using MSI-X */
+ xhci_msix_sync_irqs(xhci);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(xhci_suspend);
+
+/*
+ * start xHC (not bus-specific)
+ *
+ * This is called when the machine transition from S3/S4 mode.
+ *
+ */
+int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
+{
+ u32 command, temp = 0;
+ struct usb_hcd *hcd = xhci_to_hcd(xhci);
+ int retval = 0;
+ bool comp_timer_running = false;
+ bool pending_portevent = false;
+ bool reinit_xhc = false;
+
+ if (!hcd->state)
+ return 0;
+
+ /* Wait a bit if either of the roothubs need to settle from the
+ * transition into bus suspend.
+ */
+
+ if (time_before(jiffies, xhci->usb2_rhub.bus_state.next_statechange) ||
+ time_before(jiffies, xhci->usb3_rhub.bus_state.next_statechange))
+ msleep(100);
+
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ if (xhci->shared_hcd)
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
+
+ spin_lock_irq(&xhci->lock);
+
+ if (hibernated || xhci->quirks & XHCI_RESET_ON_RESUME || xhci->broken_suspend)
+ reinit_xhc = true;
+
+ if (!reinit_xhc) {
+ /*
+ * Some controllers might lose power during suspend, so wait
+ * for controller not ready bit to clear, just as in xHC init.
+ */
+ retval = xhci_handshake(&xhci->op_regs->status,
+ STS_CNR, 0, 10 * 1000 * 1000);
+ if (retval) {
+ xhci_warn(xhci, "Controller not ready at resume %d\n",
+ retval);
+ spin_unlock_irq(&xhci->lock);
+ return retval;
+ }
+ /* step 1: restore register */
+ xhci_restore_registers(xhci);
+ /* step 2: initialize command ring buffer */
+ xhci_set_cmd_ring_deq(xhci);
+ /* step 3: restore state and start state*/
+ /* step 3: set CRS flag */
+ command = readl(&xhci->op_regs->command);
+ command |= CMD_CRS;
+ writel(command, &xhci->op_regs->command);
+ /*
+ * Some controllers take up to 55+ ms to complete the controller
+ * restore so setting the timeout to 100ms. Xhci specification
+ * doesn't mention any timeout value.
+ */
+ if (xhci_handshake(&xhci->op_regs->status,
+ STS_RESTORE, 0, 100 * 1000)) {
+ xhci_warn(xhci, "WARN: xHC restore state timeout\n");
+ spin_unlock_irq(&xhci->lock);
+ return -ETIMEDOUT;
+ }
+ }
+
+ temp = readl(&xhci->op_regs->status);
+
+ /* re-initialize the HC on Restore Error, or Host Controller Error */
+ if (temp & (STS_SRE | STS_HCE)) {
+ reinit_xhc = true;
+ if (!xhci->broken_suspend)
+ xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp);
+ }
+
+ if (reinit_xhc) {
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ !(xhci_all_ports_seen_u0(xhci))) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "Compliance Mode Recovery Timer deleted!");
+ }
+
+ /* Let the USB core know _both_ roothubs lost power. */
+ usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
+ if (xhci->shared_hcd)
+ usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
+
+ xhci_dbg(xhci, "Stop HCD\n");
+ xhci_halt(xhci);
+ xhci_zero_64b_regs(xhci);
+ retval = xhci_reset(xhci, XHCI_RESET_LONG_USEC);
+ spin_unlock_irq(&xhci->lock);
+ if (retval)
+ return retval;
+ xhci_cleanup_msix(xhci);
+
+ xhci_dbg(xhci, "// Disabling event ring interrupts\n");
+ temp = readl(&xhci->op_regs->status);
+ writel((temp & ~0x1fff) | STS_EINT, &xhci->op_regs->status);
+ temp = readl(&xhci->ir_set->irq_pending);
+ writel(ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending);
+
+ xhci_dbg(xhci, "cleaning up memory\n");
+ xhci_mem_cleanup(xhci);
+ xhci_debugfs_exit(xhci);
+ xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
+ readl(&xhci->op_regs->status));
+
+ /* USB core calls the PCI reinit and start functions twice:
+ * first with the primary HCD, and then with the secondary HCD.
+ * If we don't do the same, the host will never be started.
+ */
+ xhci_dbg(xhci, "Initialize the xhci_hcd\n");
+ retval = xhci_init(hcd);
+ if (retval)
+ return retval;
+ comp_timer_running = true;
+
+ xhci_dbg(xhci, "Start the primary HCD\n");
+ retval = xhci_run(hcd);
+ if (!retval && xhci->shared_hcd) {
+ xhci_dbg(xhci, "Start the secondary HCD\n");
+ retval = xhci_run(xhci->shared_hcd);
+ }
+
+ hcd->state = HC_STATE_SUSPENDED;
+ if (xhci->shared_hcd)
+ xhci->shared_hcd->state = HC_STATE_SUSPENDED;
+ goto done;
+ }
+
+ /* step 4: set Run/Stop bit */
+ command = readl(&xhci->op_regs->command);
+ command |= CMD_RUN;
+ writel(command, &xhci->op_regs->command);
+ xhci_handshake(&xhci->op_regs->status, STS_HALT,
+ 0, 250 * 1000);
+
+ /* step 5: walk topology and initialize portsc,
+ * portpmsc and portli
+ */
+ /* this is done in bus_resume */
+
+ /* step 6: restart each of the previously
+ * Running endpoints by ringing their doorbells
+ */
+
+ spin_unlock_irq(&xhci->lock);
+
+ xhci_dbc_resume(xhci);
+
+ done:
+ if (retval == 0) {
+ /*
+ * Resume roothubs only if there are pending events.
+ * USB 3 devices resend U3 LFPS wake after a 100ms delay if
+ * the first wake signalling failed, give it that chance.
+ */
+ pending_portevent = xhci_pending_portevent(xhci);
+ if (!pending_portevent) {
+ msleep(120);
+ pending_portevent = xhci_pending_portevent(xhci);
+ }
+
+ if (pending_portevent) {
+ if (xhci->shared_hcd)
+ usb_hcd_resume_root_hub(xhci->shared_hcd);
+ usb_hcd_resume_root_hub(hcd);
+ }
+ }
+ /*
+ * If system is subject to the Quirk, Compliance Mode Timer needs to
+ * be re-initialized Always after a system resume. Ports are subject
+ * to suffer the Compliance Mode issue again. It doesn't matter if
+ * ports have entered previously to U0 before system's suspension.
+ */
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running)
+ compliance_mode_recovery_timer_init(xhci);
+
+ if (xhci->quirks & XHCI_ASMEDIA_MODIFY_FLOWCONTROL)
+ usb_asmedia_modifyflowcontrol(to_pci_dev(hcd->self.controller));
+
+ /* Re-enable port polling. */
+ xhci_dbg(xhci, "%s: starting usb%d port polling.\n",
+ __func__, hcd->self.busnum);
+ if (xhci->shared_hcd) {
+ set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+ usb_hcd_poll_rh_status(xhci->shared_hcd);
+ }
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ usb_hcd_poll_rh_status(hcd);
+
+ return retval;
+}
+EXPORT_SYMBOL_GPL(xhci_resume);
+#endif /* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+static int xhci_map_temp_buffer(struct usb_hcd *hcd, struct urb *urb)
+{
+ void *temp;
+ int ret = 0;
+ unsigned int buf_len;
+ enum dma_data_direction dir;
+
+ dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+ buf_len = urb->transfer_buffer_length;
+
+ temp = kzalloc_node(buf_len, GFP_ATOMIC,
+ dev_to_node(hcd->self.sysdev));
+
+ if (usb_urb_dir_out(urb))
+ sg_pcopy_to_buffer(urb->sg, urb->num_sgs,
+ temp, buf_len, 0);
+
+ urb->transfer_buffer = temp;
+ urb->transfer_dma = dma_map_single(hcd->self.sysdev,
+ urb->transfer_buffer,
+ urb->transfer_buffer_length,
+ dir);
+
+ if (dma_mapping_error(hcd->self.sysdev,
+ urb->transfer_dma)) {
+ ret = -EAGAIN;
+ kfree(temp);
+ } else {
+ urb->transfer_flags |= URB_DMA_MAP_SINGLE;
+ }
+
+ return ret;
+}
+
+static bool xhci_urb_temp_buffer_required(struct usb_hcd *hcd,
+ struct urb *urb)
+{
+ bool ret = false;
+ unsigned int i;
+ unsigned int len = 0;
+ unsigned int trb_size;
+ unsigned int max_pkt;
+ struct scatterlist *sg;
+ struct scatterlist *tail_sg;
+
+ tail_sg = urb->sg;
+ max_pkt = usb_endpoint_maxp(&urb->ep->desc);
+
+ if (!urb->num_sgs)
+ return ret;
+
+ if (urb->dev->speed >= USB_SPEED_SUPER)
+ trb_size = TRB_CACHE_SIZE_SS;
+ else
+ trb_size = TRB_CACHE_SIZE_HS;
+
+ if (urb->transfer_buffer_length != 0 &&
+ !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
+ for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+ len = len + sg->length;
+ if (i > trb_size - 2) {
+ len = len - tail_sg->length;
+ if (len < max_pkt) {
+ ret = true;
+ break;
+ }
+
+ tail_sg = sg_next(tail_sg);
+ }
+ }
+ }
+ return ret;
+}
+
+static void xhci_unmap_temp_buf(struct usb_hcd *hcd, struct urb *urb)
+{
+ unsigned int len;
+ unsigned int buf_len;
+ enum dma_data_direction dir;
+
+ dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+ buf_len = urb->transfer_buffer_length;
+
+ if (IS_ENABLED(CONFIG_HAS_DMA) &&
+ (urb->transfer_flags & URB_DMA_MAP_SINGLE))
+ dma_unmap_single(hcd->self.sysdev,
+ urb->transfer_dma,
+ urb->transfer_buffer_length,
+ dir);
+
+ if (usb_urb_dir_in(urb)) {
+ len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs,
+ urb->transfer_buffer,
+ buf_len,
+ 0);
+ if (len != buf_len) {
+ xhci_dbg(hcd_to_xhci(hcd),
+ "Copy from tmp buf to urb sg list failed\n");
+ urb->actual_length = len;
+ }
+ }
+ urb->transfer_flags &= ~URB_DMA_MAP_SINGLE;
+ kfree(urb->transfer_buffer);
+ urb->transfer_buffer = NULL;
+}
+
+/*
+ * Bypass the DMA mapping if URB is suitable for Immediate Transfer (IDT),
+ * we'll copy the actual data into the TRB address register. This is limited to
+ * transfers up to 8 bytes on output endpoints of any kind with wMaxPacketSize
+ * >= 8 bytes. If suitable for IDT only one Transfer TRB per TD is allowed.
+ */
+static int xhci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags)
+{
+ struct xhci_hcd *xhci;
+
+ xhci = hcd_to_xhci(hcd);
+
+ if (xhci_urb_suitable_for_idt(urb))
+ return 0;
+
+ if (xhci->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK) {
+ if (xhci_urb_temp_buffer_required(hcd, urb))
+ return xhci_map_temp_buffer(hcd, urb);
+ }
+ return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+}
+
+static void xhci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+ struct xhci_hcd *xhci;
+ bool unmap_temp_buf = false;
+
+ xhci = hcd_to_xhci(hcd);
+
+ if (urb->num_sgs && (urb->transfer_flags & URB_DMA_MAP_SINGLE))
+ unmap_temp_buf = true;
+
+ if ((xhci->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK) && unmap_temp_buf)
+ xhci_unmap_temp_buf(hcd, urb);
+ else
+ usb_hcd_unmap_urb_for_dma(hcd, urb);
+}
+
+/**
+ * xhci_get_endpoint_index - Used for passing endpoint bitmasks between the core and
+ * HCDs. Find the index for an endpoint given its descriptor. Use the return
+ * value to right shift 1 for the bitmask.
+ *
+ * Index = (epnum * 2) + direction - 1,
+ * where direction = 0 for OUT, 1 for IN.
+ * For control endpoints, the IN index is used (OUT index is unused), so
+ * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2)
+ */
+unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc)
+{
+ unsigned int index;
+ if (usb_endpoint_xfer_control(desc))
+ index = (unsigned int) (usb_endpoint_num(desc)*2);
+ else
+ index = (unsigned int) (usb_endpoint_num(desc)*2) +
+ (usb_endpoint_dir_in(desc) ? 1 : 0) - 1;
+ return index;
+}
+EXPORT_SYMBOL_GPL(xhci_get_endpoint_index);
+
+/* The reverse operation to xhci_get_endpoint_index. Calculate the USB endpoint
+ * address from the XHCI endpoint index.
+ */
+static unsigned int xhci_get_endpoint_address(unsigned int ep_index)
+{
+ unsigned int number = DIV_ROUND_UP(ep_index, 2);
+ unsigned int direction = ep_index % 2 ? USB_DIR_OUT : USB_DIR_IN;
+ return direction | number;
+}
+
+/* Find the flag for this endpoint (for use in the control context). Use the
+ * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is
+ * bit 1, etc.
+ */
+static unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc)
+{
+ return 1 << (xhci_get_endpoint_index(desc) + 1);
+}
+
+/* Compute the last valid endpoint context index. Basically, this is the
+ * endpoint index plus one. For slot contexts with more than valid endpoint,
+ * we find the most significant bit set in the added contexts flags.
+ * e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000
+ * fls(0b1000) = 4, but the endpoint context index is 3, so subtract one.
+ */
+unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
+{
+ return fls(added_ctxs) - 1;
+}
+
+/* Returns 1 if the arguments are OK;
+ * returns 0 this is a root hub; returns -EINVAL for NULL pointers.
+ */
+static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint *ep, int check_ep, bool check_virt_dev,
+ const char *func) {
+ struct xhci_hcd *xhci;
+ struct xhci_virt_device *virt_dev;
+
+ if (!hcd || (check_ep && !ep) || !udev) {
+ pr_debug("xHCI %s called with invalid args\n", func);
+ return -EINVAL;
+ }
+ if (!udev->parent) {
+ pr_debug("xHCI %s called for root hub\n", func);
+ return 0;
+ }
+
+ xhci = hcd_to_xhci(hcd);
+ if (check_virt_dev) {
+ if (!udev->slot_id || !xhci->devs[udev->slot_id]) {
+ xhci_dbg(xhci, "xHCI %s called with unaddressed device\n",
+ func);
+ return -EINVAL;
+ }
+
+ virt_dev = xhci->devs[udev->slot_id];
+ if (virt_dev->udev != udev) {
+ xhci_dbg(xhci, "xHCI %s called with udev and "
+ "virt_dev does not match\n", func);
+ return -EINVAL;
+ }
+ }
+
+ if (xhci->xhc_state & XHCI_STATE_HALTED)
+ return -ENODEV;
+
+ return 1;
+}
+
+static int xhci_configure_endpoint(struct xhci_hcd *xhci,
+ struct usb_device *udev, struct xhci_command *command,
+ bool ctx_change, bool must_succeed);
+
+/*
+ * Full speed devices may have a max packet size greater than 8 bytes, but the
+ * USB core doesn't know that until it reads the first 8 bytes of the
+ * descriptor. If the usb_device's max packet size changes after that point,
+ * we need to issue an evaluate context command and wait on it.
+ */
+static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
+ unsigned int ep_index, struct urb *urb, gfp_t mem_flags)
+{
+ struct xhci_container_ctx *out_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_ep_ctx *ep_ctx;
+ struct xhci_command *command;
+ int max_packet_size;
+ int hw_max_packet_size;
+ int ret = 0;
+
+ out_ctx = xhci->devs[slot_id]->out_ctx;
+ ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+ hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2));
+ max_packet_size = usb_endpoint_maxp(&urb->dev->ep0.desc);
+ if (hw_max_packet_size != max_packet_size) {
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "Max Packet Size for ep 0 changed.");
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "Max packet size in usb_device = %d",
+ max_packet_size);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "Max packet size in xHCI HW = %d",
+ hw_max_packet_size);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "Issuing evaluate context command.");
+
+ /* Set up the input context flags for the command */
+ /* FIXME: This won't work if a non-default control endpoint
+ * changes max packet sizes.
+ */
+
+ command = xhci_alloc_command(xhci, true, mem_flags);
+ if (!command)
+ return -ENOMEM;
+
+ command->in_ctx = xhci->devs[slot_id]->in_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ ret = -ENOMEM;
+ goto command_cleanup;
+ }
+ /* Set up the modified control endpoint 0 */
+ xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx,
+ xhci->devs[slot_id]->out_ctx, ep_index);
+
+ ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index);
+ ep_ctx->ep_info &= cpu_to_le32(~EP_STATE_MASK);/* must clear */
+ ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK);
+ ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size));
+
+ ctrl_ctx->add_flags = cpu_to_le32(EP0_FLAG);
+ ctrl_ctx->drop_flags = 0;
+
+ ret = xhci_configure_endpoint(xhci, urb->dev, command,
+ true, false);
+
+ /* Clean up the input context for later use by bandwidth
+ * functions.
+ */
+ ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG);
+command_cleanup:
+ kfree(command->completion);
+ kfree(command);
+ }
+ return ret;
+}
+
+/*
+ * non-error returns are a promise to giveback() the urb later
+ * we drop ownership so next owner (or urb unlink) can get it
+ */
+static int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ unsigned long flags;
+ int ret = 0;
+ unsigned int slot_id, ep_index;
+ unsigned int *ep_state;
+ struct urb_priv *urb_priv;
+ int num_tds;
+
+ if (!urb)
+ return -EINVAL;
+ ret = xhci_check_args(hcd, urb->dev, urb->ep,
+ true, true, __func__);
+ if (ret <= 0)
+ return ret ? ret : -EINVAL;
+
+ slot_id = urb->dev->slot_id;
+ ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+ ep_state = &xhci->devs[slot_id]->eps[ep_index].ep_state;
+
+ if (!HCD_HW_ACCESSIBLE(hcd))
+ return -ESHUTDOWN;
+
+ if (xhci->devs[slot_id]->flags & VDEV_PORT_ERROR) {
+ xhci_dbg(xhci, "Can't queue urb, port error, link inactive\n");
+ return -ENODEV;
+ }
+
+ if (usb_endpoint_xfer_isoc(&urb->ep->desc))
+ num_tds = urb->number_of_packets;
+ else if (usb_endpoint_is_bulk_out(&urb->ep->desc) &&
+ urb->transfer_buffer_length > 0 &&
+ urb->transfer_flags & URB_ZERO_PACKET &&
+ !(urb->transfer_buffer_length % usb_endpoint_maxp(&urb->ep->desc)))
+ num_tds = 2;
+ else
+ num_tds = 1;
+
+ urb_priv = kzalloc(struct_size(urb_priv, td, num_tds), mem_flags);
+ if (!urb_priv)
+ return -ENOMEM;
+
+ urb_priv->num_tds = num_tds;
+ urb_priv->num_tds_done = 0;
+ urb->hcpriv = urb_priv;
+
+ trace_xhci_urb_enqueue(urb);
+
+ if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+ /* Check to see if the max packet size for the default control
+ * endpoint changed during FS device enumeration
+ */
+ if (urb->dev->speed == USB_SPEED_FULL) {
+ ret = xhci_check_maxpacket(xhci, slot_id,
+ ep_index, urb, mem_flags);
+ if (ret < 0) {
+ xhci_urb_free_priv(urb_priv);
+ urb->hcpriv = NULL;
+ return ret;
+ }
+ }
+ }
+
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ if (xhci->xhc_state & XHCI_STATE_DYING) {
+ xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for non-responsive xHCI host.\n",
+ urb->ep->desc.bEndpointAddress, urb);
+ ret = -ESHUTDOWN;
+ goto free_priv;
+ }
+ if (*ep_state & (EP_GETTING_STREAMS | EP_GETTING_NO_STREAMS)) {
+ xhci_warn(xhci, "WARN: Can't enqueue URB, ep in streams transition state %x\n",
+ *ep_state);
+ ret = -EINVAL;
+ goto free_priv;
+ }
+ if (*ep_state & EP_SOFT_CLEAR_TOGGLE) {
+ xhci_warn(xhci, "Can't enqueue URB while manually clearing toggle\n");
+ ret = -EINVAL;
+ goto free_priv;
+ }
+
+ switch (usb_endpoint_type(&urb->ep->desc)) {
+
+ case USB_ENDPOINT_XFER_CONTROL:
+ ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
+ slot_id, ep_index);
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
+ slot_id, ep_index);
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb,
+ slot_id, ep_index);
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb,
+ slot_id, ep_index);
+ }
+
+ if (ret) {
+free_priv:
+ xhci_urb_free_priv(urb_priv);
+ urb->hcpriv = NULL;
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return ret;
+}
+
+/*
+ * Remove the URB's TD from the endpoint ring. This may cause the HC to stop
+ * USB transfers, potentially stopping in the middle of a TRB buffer. The HC
+ * should pick up where it left off in the TD, unless a Set Transfer Ring
+ * Dequeue Pointer is issued.
+ *
+ * The TRBs that make up the buffers for the canceled URB will be "removed" from
+ * the ring. Since the ring is a contiguous structure, they can't be physically
+ * removed. Instead, there are two options:
+ *
+ * 1) If the HC is in the middle of processing the URB to be canceled, we
+ * simply move the ring's dequeue pointer past those TRBs using the Set
+ * Transfer Ring Dequeue Pointer command. This will be the common case,
+ * when drivers timeout on the last submitted URB and attempt to cancel.
+ *
+ * 2) If the HC is in the middle of a different TD, we turn the TRBs into a
+ * series of 1-TRB transfer no-op TDs. (No-ops shouldn't be chained.) The
+ * HC will need to invalidate the any TRBs it has cached after the stop
+ * endpoint command, as noted in the xHCI 0.95 errata.
+ *
+ * 3) The TD may have completed by the time the Stop Endpoint Command
+ * completes, so software needs to handle that case too.
+ *
+ * This function should protect against the TD enqueueing code ringing the
+ * doorbell while this code is waiting for a Stop Endpoint command to complete.
+ * It also needs to account for multiple cancellations on happening at the same
+ * time for the same endpoint.
+ *
+ * Note that this function can be called in any context, or so says
+ * usb_hcd_unlink_urb()
+ */
+static int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+ unsigned long flags;
+ int ret, i;
+ u32 temp;
+ struct xhci_hcd *xhci;
+ struct urb_priv *urb_priv;
+ struct xhci_td *td;
+ unsigned int ep_index;
+ struct xhci_ring *ep_ring;
+ struct xhci_virt_ep *ep;
+ struct xhci_command *command;
+ struct xhci_virt_device *vdev;
+
+ xhci = hcd_to_xhci(hcd);
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ trace_xhci_urb_dequeue(urb);
+
+ /* Make sure the URB hasn't completed or been unlinked already */
+ ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (ret)
+ goto done;
+
+ /* give back URB now if we can't queue it for cancel */
+ vdev = xhci->devs[urb->dev->slot_id];
+ urb_priv = urb->hcpriv;
+ if (!vdev || !urb_priv)
+ goto err_giveback;
+
+ ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+ ep = &vdev->eps[ep_index];
+ ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
+ if (!ep || !ep_ring)
+ goto err_giveback;
+
+ /* If xHC is dead take it down and return ALL URBs in xhci_hc_died() */
+ temp = readl(&xhci->op_regs->status);
+ if (temp == ~(u32)0 || xhci->xhc_state & XHCI_STATE_DYING) {
+ xhci_hc_died(xhci);
+ goto done;
+ }
+
+ /*
+ * check ring is not re-allocated since URB was enqueued. If it is, then
+ * make sure none of the ring related pointers in this URB private data
+ * are touched, such as td_list, otherwise we overwrite freed data
+ */
+ if (!td_on_ring(&urb_priv->td[0], ep_ring)) {
+ xhci_err(xhci, "Canceled URB td not found on endpoint ring");
+ for (i = urb_priv->num_tds_done; i < urb_priv->num_tds; i++) {
+ td = &urb_priv->td[i];
+ if (!list_empty(&td->cancelled_td_list))
+ list_del_init(&td->cancelled_td_list);
+ }
+ goto err_giveback;
+ }
+
+ if (xhci->xhc_state & XHCI_STATE_HALTED) {
+ xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
+ "HC halted, freeing TD manually.");
+ for (i = urb_priv->num_tds_done;
+ i < urb_priv->num_tds;
+ i++) {
+ td = &urb_priv->td[i];
+ if (!list_empty(&td->td_list))
+ list_del_init(&td->td_list);
+ if (!list_empty(&td->cancelled_td_list))
+ list_del_init(&td->cancelled_td_list);
+ }
+ goto err_giveback;
+ }
+
+ i = urb_priv->num_tds_done;
+ if (i < urb_priv->num_tds)
+ xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
+ "Cancel URB %p, dev %s, ep 0x%x, "
+ "starting at offset 0x%llx",
+ urb, urb->dev->devpath,
+ urb->ep->desc.bEndpointAddress,
+ (unsigned long long) xhci_trb_virt_to_dma(
+ urb_priv->td[i].start_seg,
+ urb_priv->td[i].first_trb));
+
+ for (; i < urb_priv->num_tds; i++) {
+ td = &urb_priv->td[i];
+ /* TD can already be on cancelled list if ep halted on it */
+ if (list_empty(&td->cancelled_td_list)) {
+ td->cancel_status = TD_DIRTY;
+ list_add_tail(&td->cancelled_td_list,
+ &ep->cancelled_td_list);
+ }
+ }
+
+ /* Queue a stop endpoint command, but only if this is
+ * the first cancellation to be handled.
+ */
+ if (!(ep->ep_state & EP_STOP_CMD_PENDING)) {
+ command = xhci_alloc_command(xhci, false, GFP_ATOMIC);
+ if (!command) {
+ ret = -ENOMEM;
+ goto done;
+ }
+ ep->ep_state |= EP_STOP_CMD_PENDING;
+ xhci_queue_stop_endpoint(xhci, command, urb->dev->slot_id,
+ ep_index, 0);
+ xhci_ring_cmd_db(xhci);
+ }
+done:
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return ret;
+
+err_giveback:
+ if (urb_priv)
+ xhci_urb_free_priv(urb_priv);
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ usb_hcd_giveback_urb(hcd, urb, -ESHUTDOWN);
+ return ret;
+}
+
+/* Drop an endpoint from a new bandwidth configuration for this device.
+ * Only one call to this function is allowed per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+ * add the endpoint to the schedule with possibly new parameters denoted by a
+ * different endpoint descriptor in usb_host_endpoint.
+ * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+ * not allowed.
+ *
+ * The USB core will not allow URBs to be queued to an endpoint that is being
+ * disabled, so there's no need for mutual exclusion to protect
+ * the xhci->devs[slot_id] structure.
+ */
+int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_hcd *xhci;
+ struct xhci_container_ctx *in_ctx, *out_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ unsigned int ep_index;
+ struct xhci_ep_ctx *ep_ctx;
+ u32 drop_flag;
+ u32 new_add_flags, new_drop_flags;
+ int ret;
+
+ ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
+ if (ret <= 0)
+ return ret;
+ xhci = hcd_to_xhci(hcd);
+ if (xhci->xhc_state & XHCI_STATE_DYING)
+ return -ENODEV;
+
+ xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+ drop_flag = xhci_get_endpoint_flag(&ep->desc);
+ if (drop_flag == SLOT_FLAG || drop_flag == EP0_FLAG) {
+ xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n",
+ __func__, drop_flag);
+ return 0;
+ }
+
+ in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+ out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return 0;
+ }
+
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+ /* If the HC already knows the endpoint is disabled,
+ * or the HCD has noted it is disabled, ignore this request
+ */
+ if ((GET_EP_CTX_STATE(ep_ctx) == EP_STATE_DISABLED) ||
+ le32_to_cpu(ctrl_ctx->drop_flags) &
+ xhci_get_endpoint_flag(&ep->desc)) {
+ /* Do not warn when called after a usb_device_reset */
+ if (xhci->devs[udev->slot_id]->eps[ep_index].ring != NULL)
+ xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
+ __func__, ep);
+ return 0;
+ }
+
+ ctrl_ctx->drop_flags |= cpu_to_le32(drop_flag);
+ new_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags);
+
+ ctrl_ctx->add_flags &= cpu_to_le32(~drop_flag);
+ new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
+
+ xhci_debugfs_remove_endpoint(xhci, xhci->devs[udev->slot_id], ep_index);
+
+ xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
+
+ xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
+ (unsigned int) ep->desc.bEndpointAddress,
+ udev->slot_id,
+ (unsigned int) new_drop_flags,
+ (unsigned int) new_add_flags);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(xhci_drop_endpoint);
+
+/* Add an endpoint to a new possible bandwidth configuration for this device.
+ * Only one call to this function is allowed per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+ * add the endpoint to the schedule with possibly new parameters denoted by a
+ * different endpoint descriptor in usb_host_endpoint.
+ * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+ * not allowed.
+ *
+ * The USB core will not allow URBs to be queued to an endpoint until the
+ * configuration or alt setting is installed in the device, so there's no need
+ * for mutual exclusion to protect the xhci->devs[slot_id] structure.
+ */
+int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_hcd *xhci;
+ struct xhci_container_ctx *in_ctx;
+ unsigned int ep_index;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_ep_ctx *ep_ctx;
+ u32 added_ctxs;
+ u32 new_add_flags, new_drop_flags;
+ struct xhci_virt_device *virt_dev;
+ int ret = 0;
+
+ ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
+ if (ret <= 0) {
+ /* So we won't queue a reset ep command for a root hub */
+ ep->hcpriv = NULL;
+ return ret;
+ }
+ xhci = hcd_to_xhci(hcd);
+ if (xhci->xhc_state & XHCI_STATE_DYING)
+ return -ENODEV;
+
+ added_ctxs = xhci_get_endpoint_flag(&ep->desc);
+ if (added_ctxs == SLOT_FLAG || added_ctxs == EP0_FLAG) {
+ /* FIXME when we have to issue an evaluate endpoint command to
+ * deal with ep0 max packet size changing once we get the
+ * descriptors
+ */
+ xhci_dbg(xhci, "xHCI %s - can't add slot or ep 0 %#x\n",
+ __func__, added_ctxs);
+ return 0;
+ }
+
+ virt_dev = xhci->devs[udev->slot_id];
+ in_ctx = virt_dev->in_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return 0;
+ }
+
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ /* If this endpoint is already in use, and the upper layers are trying
+ * to add it again without dropping it, reject the addition.
+ */
+ if (virt_dev->eps[ep_index].ring &&
+ !(le32_to_cpu(ctrl_ctx->drop_flags) & added_ctxs)) {
+ xhci_warn(xhci, "Trying to add endpoint 0x%x "
+ "without dropping it.\n",
+ (unsigned int) ep->desc.bEndpointAddress);
+ return -EINVAL;
+ }
+
+ /* If the HCD has already noted the endpoint is enabled,
+ * ignore this request.
+ */
+ if (le32_to_cpu(ctrl_ctx->add_flags) & added_ctxs) {
+ xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
+ __func__, ep);
+ return 0;
+ }
+
+ /*
+ * Configuration and alternate setting changes must be done in
+ * process context, not interrupt context (or so documenation
+ * for usb_set_interface() and usb_set_configuration() claim).
+ */
+ if (xhci_endpoint_init(xhci, virt_dev, udev, ep, GFP_NOIO) < 0) {
+ dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n",
+ __func__, ep->desc.bEndpointAddress);
+ return -ENOMEM;
+ }
+
+ ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
+ new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
+
+ /* If xhci_endpoint_disable() was called for this endpoint, but the
+ * xHC hasn't been notified yet through the check_bandwidth() call,
+ * this re-adds a new state for the endpoint from the new endpoint
+ * descriptors. We must drop and re-add this endpoint, so we leave the
+ * drop flags alone.
+ */
+ new_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags);
+
+ /* Store the usb_device pointer for later use */
+ ep->hcpriv = udev;
+
+ ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
+ trace_xhci_add_endpoint(ep_ctx);
+
+ xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
+ (unsigned int) ep->desc.bEndpointAddress,
+ udev->slot_id,
+ (unsigned int) new_drop_flags,
+ (unsigned int) new_add_flags);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(xhci_add_endpoint);
+
+static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev)
+{
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_ep_ctx *ep_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ int i;
+
+ ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return;
+ }
+
+ /* When a device's add flag and drop flag are zero, any subsequent
+ * configure endpoint command will leave that endpoint's state
+ * untouched. Make sure we don't leave any old state in the input
+ * endpoint contexts.
+ */
+ ctrl_ctx->drop_flags = 0;
+ ctrl_ctx->add_flags = 0;
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
+ /* Endpoint 0 is always valid */
+ slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1));
+ for (i = 1; i < 31; i++) {
+ ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i);
+ ep_ctx->ep_info = 0;
+ ep_ctx->ep_info2 = 0;
+ ep_ctx->deq = 0;
+ ep_ctx->tx_info = 0;
+ }
+}
+
+static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
+ struct usb_device *udev, u32 *cmd_status)
+{
+ int ret;
+
+ switch (*cmd_status) {
+ case COMP_COMMAND_ABORTED:
+ case COMP_COMMAND_RING_STOPPED:
+ xhci_warn(xhci, "Timeout while waiting for configure endpoint command\n");
+ ret = -ETIME;
+ break;
+ case COMP_RESOURCE_ERROR:
+ dev_warn(&udev->dev,
+ "Not enough host controller resources for new device state.\n");
+ ret = -ENOMEM;
+ /* FIXME: can we allocate more resources for the HC? */
+ break;
+ case COMP_BANDWIDTH_ERROR:
+ case COMP_SECONDARY_BANDWIDTH_ERROR:
+ dev_warn(&udev->dev,
+ "Not enough bandwidth for new device state.\n");
+ ret = -ENOSPC;
+ /* FIXME: can we go back to the old state? */
+ break;
+ case COMP_TRB_ERROR:
+ /* the HCD set up something wrong */
+ dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, "
+ "add flag = 1, "
+ "and endpoint is not disabled.\n");
+ ret = -EINVAL;
+ break;
+ case COMP_INCOMPATIBLE_DEVICE_ERROR:
+ dev_warn(&udev->dev,
+ "ERROR: Incompatible device for endpoint configure command.\n");
+ ret = -ENODEV;
+ break;
+ case COMP_SUCCESS:
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "Successful Endpoint Configure command");
+ ret = 0;
+ break;
+ default:
+ xhci_err(xhci, "ERROR: unexpected command completion code 0x%x.\n",
+ *cmd_status);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
+ struct usb_device *udev, u32 *cmd_status)
+{
+ int ret;
+
+ switch (*cmd_status) {
+ case COMP_COMMAND_ABORTED:
+ case COMP_COMMAND_RING_STOPPED:
+ xhci_warn(xhci, "Timeout while waiting for evaluate context command\n");
+ ret = -ETIME;
+ break;
+ case COMP_PARAMETER_ERROR:
+ dev_warn(&udev->dev,
+ "WARN: xHCI driver setup invalid evaluate context command.\n");
+ ret = -EINVAL;
+ break;
+ case COMP_SLOT_NOT_ENABLED_ERROR:
+ dev_warn(&udev->dev,
+ "WARN: slot not enabled for evaluate context command.\n");
+ ret = -EINVAL;
+ break;
+ case COMP_CONTEXT_STATE_ERROR:
+ dev_warn(&udev->dev,
+ "WARN: invalid context state for evaluate context command.\n");
+ ret = -EINVAL;
+ break;
+ case COMP_INCOMPATIBLE_DEVICE_ERROR:
+ dev_warn(&udev->dev,
+ "ERROR: Incompatible device for evaluate context command.\n");
+ ret = -ENODEV;
+ break;
+ case COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR:
+ /* Max Exit Latency too large error */
+ dev_warn(&udev->dev, "WARN: Max Exit Latency too large\n");
+ ret = -EINVAL;
+ break;
+ case COMP_SUCCESS:
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "Successful evaluate context command");
+ ret = 0;
+ break;
+ default:
+ xhci_err(xhci, "ERROR: unexpected command completion code 0x%x.\n",
+ *cmd_status);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static u32 xhci_count_num_new_endpoints(struct xhci_hcd *xhci,
+ struct xhci_input_control_ctx *ctrl_ctx)
+{
+ u32 valid_add_flags;
+ u32 valid_drop_flags;
+
+ /* Ignore the slot flag (bit 0), and the default control endpoint flag
+ * (bit 1). The default control endpoint is added during the Address
+ * Device command and is never removed until the slot is disabled.
+ */
+ valid_add_flags = le32_to_cpu(ctrl_ctx->add_flags) >> 2;
+ valid_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags) >> 2;
+
+ /* Use hweight32 to count the number of ones in the add flags, or
+ * number of endpoints added. Don't count endpoints that are changed
+ * (both added and dropped).
+ */
+ return hweight32(valid_add_flags) -
+ hweight32(valid_add_flags & valid_drop_flags);
+}
+
+static unsigned int xhci_count_num_dropped_endpoints(struct xhci_hcd *xhci,
+ struct xhci_input_control_ctx *ctrl_ctx)
+{
+ u32 valid_add_flags;
+ u32 valid_drop_flags;
+
+ valid_add_flags = le32_to_cpu(ctrl_ctx->add_flags) >> 2;
+ valid_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags) >> 2;
+
+ return hweight32(valid_drop_flags) -
+ hweight32(valid_add_flags & valid_drop_flags);
+}
+
+/*
+ * We need to reserve the new number of endpoints before the configure endpoint
+ * command completes. We can't subtract the dropped endpoints from the number
+ * of active endpoints until the command completes because we can oversubscribe
+ * the host in this case:
+ *
+ * - the first configure endpoint command drops more endpoints than it adds
+ * - a second configure endpoint command that adds more endpoints is queued
+ * - the first configure endpoint command fails, so the config is unchanged
+ * - the second command may succeed, even though there isn't enough resources
+ *
+ * Must be called with xhci->lock held.
+ */
+static int xhci_reserve_host_resources(struct xhci_hcd *xhci,
+ struct xhci_input_control_ctx *ctrl_ctx)
+{
+ u32 added_eps;
+
+ added_eps = xhci_count_num_new_endpoints(xhci, ctrl_ctx);
+ if (xhci->num_active_eps + added_eps > xhci->limit_active_eps) {
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "Not enough ep ctxs: "
+ "%u active, need to add %u, limit is %u.",
+ xhci->num_active_eps, added_eps,
+ xhci->limit_active_eps);
+ return -ENOMEM;
+ }
+ xhci->num_active_eps += added_eps;
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "Adding %u ep ctxs, %u now active.", added_eps,
+ xhci->num_active_eps);
+ return 0;
+}
+
+/*
+ * The configure endpoint was failed by the xHC for some other reason, so we
+ * need to revert the resources that failed configuration would have used.
+ *
+ * Must be called with xhci->lock held.
+ */
+static void xhci_free_host_resources(struct xhci_hcd *xhci,
+ struct xhci_input_control_ctx *ctrl_ctx)
+{
+ u32 num_failed_eps;
+
+ num_failed_eps = xhci_count_num_new_endpoints(xhci, ctrl_ctx);
+ xhci->num_active_eps -= num_failed_eps;
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "Removing %u failed ep ctxs, %u now active.",
+ num_failed_eps,
+ xhci->num_active_eps);
+}
+
+/*
+ * Now that the command has completed, clean up the active endpoint count by
+ * subtracting out the endpoints that were dropped (but not changed).
+ *
+ * Must be called with xhci->lock held.
+ */
+static void xhci_finish_resource_reservation(struct xhci_hcd *xhci,
+ struct xhci_input_control_ctx *ctrl_ctx)
+{
+ u32 num_dropped_eps;
+
+ num_dropped_eps = xhci_count_num_dropped_endpoints(xhci, ctrl_ctx);
+ xhci->num_active_eps -= num_dropped_eps;
+ if (num_dropped_eps)
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "Removing %u dropped ep ctxs, %u now active.",
+ num_dropped_eps,
+ xhci->num_active_eps);
+}
+
+static unsigned int xhci_get_block_size(struct usb_device *udev)
+{
+ switch (udev->speed) {
+ case USB_SPEED_LOW:
+ case USB_SPEED_FULL:
+ return FS_BLOCK;
+ case USB_SPEED_HIGH:
+ return HS_BLOCK;
+ case USB_SPEED_SUPER:
+ case USB_SPEED_SUPER_PLUS:
+ return SS_BLOCK;
+ case USB_SPEED_UNKNOWN:
+ case USB_SPEED_WIRELESS:
+ default:
+ /* Should never happen */
+ return 1;
+ }
+}
+
+static unsigned int
+xhci_get_largest_overhead(struct xhci_interval_bw *interval_bw)
+{
+ if (interval_bw->overhead[LS_OVERHEAD_TYPE])
+ return LS_OVERHEAD;
+ if (interval_bw->overhead[FS_OVERHEAD_TYPE])
+ return FS_OVERHEAD;
+ return HS_OVERHEAD;
+}
+
+/* If we are changing a LS/FS device under a HS hub,
+ * make sure (if we are activating a new TT) that the HS bus has enough
+ * bandwidth for this new TT.
+ */
+static int xhci_check_tt_bw_table(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev,
+ int old_active_eps)
+{
+ struct xhci_interval_bw_table *bw_table;
+ struct xhci_tt_bw_info *tt_info;
+
+ /* Find the bandwidth table for the root port this TT is attached to. */
+ bw_table = &xhci->rh_bw[virt_dev->real_port - 1].bw_table;
+ tt_info = virt_dev->tt_info;
+ /* If this TT already had active endpoints, the bandwidth for this TT
+ * has already been added. Removing all periodic endpoints (and thus
+ * making the TT enactive) will only decrease the bandwidth used.
+ */
+ if (old_active_eps)
+ return 0;
+ if (old_active_eps == 0 && tt_info->active_eps != 0) {
+ if (bw_table->bw_used + TT_HS_OVERHEAD > HS_BW_LIMIT)
+ return -ENOMEM;
+ return 0;
+ }
+ /* Not sure why we would have no new active endpoints...
+ *
+ * Maybe because of an Evaluate Context change for a hub update or a
+ * control endpoint 0 max packet size change?
+ * FIXME: skip the bandwidth calculation in that case.
+ */
+ return 0;
+}
+
+static int xhci_check_ss_bw(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev)
+{
+ unsigned int bw_reserved;
+
+ bw_reserved = DIV_ROUND_UP(SS_BW_RESERVED*SS_BW_LIMIT_IN, 100);
+ if (virt_dev->bw_table->ss_bw_in > (SS_BW_LIMIT_IN - bw_reserved))
+ return -ENOMEM;
+
+ bw_reserved = DIV_ROUND_UP(SS_BW_RESERVED*SS_BW_LIMIT_OUT, 100);
+ if (virt_dev->bw_table->ss_bw_out > (SS_BW_LIMIT_OUT - bw_reserved))
+ return -ENOMEM;
+
+ return 0;
+}
+
+/*
+ * This algorithm is a very conservative estimate of the worst-case scheduling
+ * scenario for any one interval. The hardware dynamically schedules the
+ * packets, so we can't tell which microframe could be the limiting factor in
+ * the bandwidth scheduling. This only takes into account periodic endpoints.
+ *
+ * Obviously, we can't solve an NP complete problem to find the minimum worst
+ * case scenario. Instead, we come up with an estimate that is no less than
+ * the worst case bandwidth used for any one microframe, but may be an
+ * over-estimate.
+ *
+ * We walk the requirements for each endpoint by interval, starting with the
+ * smallest interval, and place packets in the schedule where there is only one
+ * possible way to schedule packets for that interval. In order to simplify
+ * this algorithm, we record the largest max packet size for each interval, and
+ * assume all packets will be that size.
+ *
+ * For interval 0, we obviously must schedule all packets for each interval.
+ * The bandwidth for interval 0 is just the amount of data to be transmitted
+ * (the sum of all max ESIT payload sizes, plus any overhead per packet times
+ * the number of packets).
+ *
+ * For interval 1, we have two possible microframes to schedule those packets
+ * in. For this algorithm, if we can schedule the same number of packets for
+ * each possible scheduling opportunity (each microframe), we will do so. The
+ * remaining number of packets will be saved to be transmitted in the gaps in
+ * the next interval's scheduling sequence.
+ *
+ * As we move those remaining packets to be scheduled with interval 2 packets,
+ * we have to double the number of remaining packets to transmit. This is
+ * because the intervals are actually powers of 2, and we would be transmitting
+ * the previous interval's packets twice in this interval. We also have to be
+ * sure that when we look at the largest max packet size for this interval, we
+ * also look at the largest max packet size for the remaining packets and take
+ * the greater of the two.
+ *
+ * The algorithm continues to evenly distribute packets in each scheduling
+ * opportunity, and push the remaining packets out, until we get to the last
+ * interval. Then those packets and their associated overhead are just added
+ * to the bandwidth used.
+ */
+static int xhci_check_bw_table(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev,
+ int old_active_eps)
+{
+ unsigned int bw_reserved;
+ unsigned int max_bandwidth;
+ unsigned int bw_used;
+ unsigned int block_size;
+ struct xhci_interval_bw_table *bw_table;
+ unsigned int packet_size = 0;
+ unsigned int overhead = 0;
+ unsigned int packets_transmitted = 0;
+ unsigned int packets_remaining = 0;
+ unsigned int i;
+
+ if (virt_dev->udev->speed >= USB_SPEED_SUPER)
+ return xhci_check_ss_bw(xhci, virt_dev);
+
+ if (virt_dev->udev->speed == USB_SPEED_HIGH) {
+ max_bandwidth = HS_BW_LIMIT;
+ /* Convert percent of bus BW reserved to blocks reserved */
+ bw_reserved = DIV_ROUND_UP(HS_BW_RESERVED * max_bandwidth, 100);
+ } else {
+ max_bandwidth = FS_BW_LIMIT;
+ bw_reserved = DIV_ROUND_UP(FS_BW_RESERVED * max_bandwidth, 100);
+ }
+
+ bw_table = virt_dev->bw_table;
+ /* We need to translate the max packet size and max ESIT payloads into
+ * the units the hardware uses.
+ */
+ block_size = xhci_get_block_size(virt_dev->udev);
+
+ /* If we are manipulating a LS/FS device under a HS hub, double check
+ * that the HS bus has enough bandwidth if we are activing a new TT.
+ */
+ if (virt_dev->tt_info) {
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "Recalculating BW for rootport %u",
+ virt_dev->real_port);
+ if (xhci_check_tt_bw_table(xhci, virt_dev, old_active_eps)) {
+ xhci_warn(xhci, "Not enough bandwidth on HS bus for "
+ "newly activated TT.\n");
+ return -ENOMEM;
+ }
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "Recalculating BW for TT slot %u port %u",
+ virt_dev->tt_info->slot_id,
+ virt_dev->tt_info->ttport);
+ } else {
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "Recalculating BW for rootport %u",
+ virt_dev->real_port);
+ }
+
+ /* Add in how much bandwidth will be used for interval zero, or the
+ * rounded max ESIT payload + number of packets * largest overhead.
+ */
+ bw_used = DIV_ROUND_UP(bw_table->interval0_esit_payload, block_size) +
+ bw_table->interval_bw[0].num_packets *
+ xhci_get_largest_overhead(&bw_table->interval_bw[0]);
+
+ for (i = 1; i < XHCI_MAX_INTERVAL; i++) {
+ unsigned int bw_added;
+ unsigned int largest_mps;
+ unsigned int interval_overhead;
+
+ /*
+ * How many packets could we transmit in this interval?
+ * If packets didn't fit in the previous interval, we will need
+ * to transmit that many packets twice within this interval.
+ */
+ packets_remaining = 2 * packets_remaining +
+ bw_table->interval_bw[i].num_packets;
+
+ /* Find the largest max packet size of this or the previous
+ * interval.
+ */
+ if (list_empty(&bw_table->interval_bw[i].endpoints))
+ largest_mps = 0;
+ else {
+ struct xhci_virt_ep *virt_ep;
+ struct list_head *ep_entry;
+
+ ep_entry = bw_table->interval_bw[i].endpoints.next;
+ virt_ep = list_entry(ep_entry,
+ struct xhci_virt_ep, bw_endpoint_list);
+ /* Convert to blocks, rounding up */
+ largest_mps = DIV_ROUND_UP(
+ virt_ep->bw_info.max_packet_size,
+ block_size);
+ }
+ if (largest_mps > packet_size)
+ packet_size = largest_mps;
+
+ /* Use the larger overhead of this or the previous interval. */
+ interval_overhead = xhci_get_largest_overhead(
+ &bw_table->interval_bw[i]);
+ if (interval_overhead > overhead)
+ overhead = interval_overhead;
+
+ /* How many packets can we evenly distribute across
+ * (1 << (i + 1)) possible scheduling opportunities?
+ */
+ packets_transmitted = packets_remaining >> (i + 1);
+
+ /* Add in the bandwidth used for those scheduled packets */
+ bw_added = packets_transmitted * (overhead + packet_size);
+
+ /* How many packets do we have remaining to transmit? */
+ packets_remaining = packets_remaining % (1 << (i + 1));
+
+ /* What largest max packet size should those packets have? */
+ /* If we've transmitted all packets, don't carry over the
+ * largest packet size.
+ */
+ if (packets_remaining == 0) {
+ packet_size = 0;
+ overhead = 0;
+ } else if (packets_transmitted > 0) {
+ /* Otherwise if we do have remaining packets, and we've
+ * scheduled some packets in this interval, take the
+ * largest max packet size from endpoints with this
+ * interval.
+ */
+ packet_size = largest_mps;
+ overhead = interval_overhead;
+ }
+ /* Otherwise carry over packet_size and overhead from the last
+ * time we had a remainder.
+ */
+ bw_used += bw_added;
+ if (bw_used > max_bandwidth) {
+ xhci_warn(xhci, "Not enough bandwidth. "
+ "Proposed: %u, Max: %u\n",
+ bw_used, max_bandwidth);
+ return -ENOMEM;
+ }
+ }
+ /*
+ * Ok, we know we have some packets left over after even-handedly
+ * scheduling interval 15. We don't know which microframes they will
+ * fit into, so we over-schedule and say they will be scheduled every
+ * microframe.
+ */
+ if (packets_remaining > 0)
+ bw_used += overhead + packet_size;
+
+ if (!virt_dev->tt_info && virt_dev->udev->speed == USB_SPEED_HIGH) {
+ unsigned int port_index = virt_dev->real_port - 1;
+
+ /* OK, we're manipulating a HS device attached to a
+ * root port bandwidth domain. Include the number of active TTs
+ * in the bandwidth used.
+ */
+ bw_used += TT_HS_OVERHEAD *
+ xhci->rh_bw[port_index].num_active_tts;
+ }
+
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "Final bandwidth: %u, Limit: %u, Reserved: %u, "
+ "Available: %u " "percent",
+ bw_used, max_bandwidth, bw_reserved,
+ (max_bandwidth - bw_used - bw_reserved) * 100 /
+ max_bandwidth);
+
+ bw_used += bw_reserved;
+ if (bw_used > max_bandwidth) {
+ xhci_warn(xhci, "Not enough bandwidth. Proposed: %u, Max: %u\n",
+ bw_used, max_bandwidth);
+ return -ENOMEM;
+ }
+
+ bw_table->bw_used = bw_used;
+ return 0;
+}
+
+static bool xhci_is_async_ep(unsigned int ep_type)
+{
+ return (ep_type != ISOC_OUT_EP && ep_type != INT_OUT_EP &&
+ ep_type != ISOC_IN_EP &&
+ ep_type != INT_IN_EP);
+}
+
+static bool xhci_is_sync_in_ep(unsigned int ep_type)
+{
+ return (ep_type == ISOC_IN_EP || ep_type == INT_IN_EP);
+}
+
+static unsigned int xhci_get_ss_bw_consumed(struct xhci_bw_info *ep_bw)
+{
+ unsigned int mps = DIV_ROUND_UP(ep_bw->max_packet_size, SS_BLOCK);
+
+ if (ep_bw->ep_interval == 0)
+ return SS_OVERHEAD_BURST +
+ (ep_bw->mult * ep_bw->num_packets *
+ (SS_OVERHEAD + mps));
+ return DIV_ROUND_UP(ep_bw->mult * ep_bw->num_packets *
+ (SS_OVERHEAD + mps + SS_OVERHEAD_BURST),
+ 1 << ep_bw->ep_interval);
+
+}
+
+static void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci,
+ struct xhci_bw_info *ep_bw,
+ struct xhci_interval_bw_table *bw_table,
+ struct usb_device *udev,
+ struct xhci_virt_ep *virt_ep,
+ struct xhci_tt_bw_info *tt_info)
+{
+ struct xhci_interval_bw *interval_bw;
+ int normalized_interval;
+
+ if (xhci_is_async_ep(ep_bw->type))
+ return;
+
+ if (udev->speed >= USB_SPEED_SUPER) {
+ if (xhci_is_sync_in_ep(ep_bw->type))
+ xhci->devs[udev->slot_id]->bw_table->ss_bw_in -=
+ xhci_get_ss_bw_consumed(ep_bw);
+ else
+ xhci->devs[udev->slot_id]->bw_table->ss_bw_out -=
+ xhci_get_ss_bw_consumed(ep_bw);
+ return;
+ }
+
+ /* SuperSpeed endpoints never get added to intervals in the table, so
+ * this check is only valid for HS/FS/LS devices.
+ */
+ if (list_empty(&virt_ep->bw_endpoint_list))
+ return;
+ /* For LS/FS devices, we need to translate the interval expressed in
+ * microframes to frames.
+ */
+ if (udev->speed == USB_SPEED_HIGH)
+ normalized_interval = ep_bw->ep_interval;
+ else
+ normalized_interval = ep_bw->ep_interval - 3;
+
+ if (normalized_interval == 0)
+ bw_table->interval0_esit_payload -= ep_bw->max_esit_payload;
+ interval_bw = &bw_table->interval_bw[normalized_interval];
+ interval_bw->num_packets -= ep_bw->num_packets;
+ switch (udev->speed) {
+ case USB_SPEED_LOW:
+ interval_bw->overhead[LS_OVERHEAD_TYPE] -= 1;
+ break;
+ case USB_SPEED_FULL:
+ interval_bw->overhead[FS_OVERHEAD_TYPE] -= 1;
+ break;
+ case USB_SPEED_HIGH:
+ interval_bw->overhead[HS_OVERHEAD_TYPE] -= 1;
+ break;
+ case USB_SPEED_SUPER:
+ case USB_SPEED_SUPER_PLUS:
+ case USB_SPEED_UNKNOWN:
+ case USB_SPEED_WIRELESS:
+ /* Should never happen because only LS/FS/HS endpoints will get
+ * added to the endpoint list.
+ */
+ return;
+ }
+ if (tt_info)
+ tt_info->active_eps -= 1;
+ list_del_init(&virt_ep->bw_endpoint_list);
+}
+
+static void xhci_add_ep_to_interval_table(struct xhci_hcd *xhci,
+ struct xhci_bw_info *ep_bw,
+ struct xhci_interval_bw_table *bw_table,
+ struct usb_device *udev,
+ struct xhci_virt_ep *virt_ep,
+ struct xhci_tt_bw_info *tt_info)
+{
+ struct xhci_interval_bw *interval_bw;
+ struct xhci_virt_ep *smaller_ep;
+ int normalized_interval;
+
+ if (xhci_is_async_ep(ep_bw->type))
+ return;
+
+ if (udev->speed == USB_SPEED_SUPER) {
+ if (xhci_is_sync_in_ep(ep_bw->type))
+ xhci->devs[udev->slot_id]->bw_table->ss_bw_in +=
+ xhci_get_ss_bw_consumed(ep_bw);
+ else
+ xhci->devs[udev->slot_id]->bw_table->ss_bw_out +=
+ xhci_get_ss_bw_consumed(ep_bw);
+ return;
+ }
+
+ /* For LS/FS devices, we need to translate the interval expressed in
+ * microframes to frames.
+ */
+ if (udev->speed == USB_SPEED_HIGH)
+ normalized_interval = ep_bw->ep_interval;
+ else
+ normalized_interval = ep_bw->ep_interval - 3;
+
+ if (normalized_interval == 0)
+ bw_table->interval0_esit_payload += ep_bw->max_esit_payload;
+ interval_bw = &bw_table->interval_bw[normalized_interval];
+ interval_bw->num_packets += ep_bw->num_packets;
+ switch (udev->speed) {
+ case USB_SPEED_LOW:
+ interval_bw->overhead[LS_OVERHEAD_TYPE] += 1;
+ break;
+ case USB_SPEED_FULL:
+ interval_bw->overhead[FS_OVERHEAD_TYPE] += 1;
+ break;
+ case USB_SPEED_HIGH:
+ interval_bw->overhead[HS_OVERHEAD_TYPE] += 1;
+ break;
+ case USB_SPEED_SUPER:
+ case USB_SPEED_SUPER_PLUS:
+ case USB_SPEED_UNKNOWN:
+ case USB_SPEED_WIRELESS:
+ /* Should never happen because only LS/FS/HS endpoints will get
+ * added to the endpoint list.
+ */
+ return;
+ }
+
+ if (tt_info)
+ tt_info->active_eps += 1;
+ /* Insert the endpoint into the list, largest max packet size first. */
+ list_for_each_entry(smaller_ep, &interval_bw->endpoints,
+ bw_endpoint_list) {
+ if (ep_bw->max_packet_size >=
+ smaller_ep->bw_info.max_packet_size) {
+ /* Add the new ep before the smaller endpoint */
+ list_add_tail(&virt_ep->bw_endpoint_list,
+ &smaller_ep->bw_endpoint_list);
+ return;
+ }
+ }
+ /* Add the new endpoint at the end of the list. */
+ list_add_tail(&virt_ep->bw_endpoint_list,
+ &interval_bw->endpoints);
+}
+
+void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev,
+ int old_active_eps)
+{
+ struct xhci_root_port_bw_info *rh_bw_info;
+ if (!virt_dev->tt_info)
+ return;
+
+ rh_bw_info = &xhci->rh_bw[virt_dev->real_port - 1];
+ if (old_active_eps == 0 &&
+ virt_dev->tt_info->active_eps != 0) {
+ rh_bw_info->num_active_tts += 1;
+ rh_bw_info->bw_table.bw_used += TT_HS_OVERHEAD;
+ } else if (old_active_eps != 0 &&
+ virt_dev->tt_info->active_eps == 0) {
+ rh_bw_info->num_active_tts -= 1;
+ rh_bw_info->bw_table.bw_used -= TT_HS_OVERHEAD;
+ }
+}
+
+static int xhci_reserve_bandwidth(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev,
+ struct xhci_container_ctx *in_ctx)
+{
+ struct xhci_bw_info ep_bw_info[31];
+ int i;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ int old_active_eps = 0;
+
+ if (virt_dev->tt_info)
+ old_active_eps = virt_dev->tt_info->active_eps;
+
+ ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < 31; i++) {
+ if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i))
+ continue;
+
+ /* Make a copy of the BW info in case we need to revert this */
+ memcpy(&ep_bw_info[i], &virt_dev->eps[i].bw_info,
+ sizeof(ep_bw_info[i]));
+ /* Drop the endpoint from the interval table if the endpoint is
+ * being dropped or changed.
+ */
+ if (EP_IS_DROPPED(ctrl_ctx, i))
+ xhci_drop_ep_from_interval_table(xhci,
+ &virt_dev->eps[i].bw_info,
+ virt_dev->bw_table,
+ virt_dev->udev,
+ &virt_dev->eps[i],
+ virt_dev->tt_info);
+ }
+ /* Overwrite the information stored in the endpoints' bw_info */
+ xhci_update_bw_info(xhci, virt_dev->in_ctx, ctrl_ctx, virt_dev);
+ for (i = 0; i < 31; i++) {
+ /* Add any changed or added endpoints to the interval table */
+ if (EP_IS_ADDED(ctrl_ctx, i))
+ xhci_add_ep_to_interval_table(xhci,
+ &virt_dev->eps[i].bw_info,
+ virt_dev->bw_table,
+ virt_dev->udev,
+ &virt_dev->eps[i],
+ virt_dev->tt_info);
+ }
+
+ if (!xhci_check_bw_table(xhci, virt_dev, old_active_eps)) {
+ /* Ok, this fits in the bandwidth we have.
+ * Update the number of active TTs.
+ */
+ xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps);
+ return 0;
+ }
+
+ /* We don't have enough bandwidth for this, revert the stored info. */
+ for (i = 0; i < 31; i++) {
+ if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i))
+ continue;
+
+ /* Drop the new copies of any added or changed endpoints from
+ * the interval table.
+ */
+ if (EP_IS_ADDED(ctrl_ctx, i)) {
+ xhci_drop_ep_from_interval_table(xhci,
+ &virt_dev->eps[i].bw_info,
+ virt_dev->bw_table,
+ virt_dev->udev,
+ &virt_dev->eps[i],
+ virt_dev->tt_info);
+ }
+ /* Revert the endpoint back to its old information */
+ memcpy(&virt_dev->eps[i].bw_info, &ep_bw_info[i],
+ sizeof(ep_bw_info[i]));
+ /* Add any changed or dropped endpoints back into the table */
+ if (EP_IS_DROPPED(ctrl_ctx, i))
+ xhci_add_ep_to_interval_table(xhci,
+ &virt_dev->eps[i].bw_info,
+ virt_dev->bw_table,
+ virt_dev->udev,
+ &virt_dev->eps[i],
+ virt_dev->tt_info);
+ }
+ return -ENOMEM;
+}
+
+
+/* Issue a configure endpoint command or evaluate context command
+ * and wait for it to finish.
+ */
+static int xhci_configure_endpoint(struct xhci_hcd *xhci,
+ struct usb_device *udev,
+ struct xhci_command *command,
+ bool ctx_change, bool must_succeed)
+{
+ int ret;
+ unsigned long flags;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_virt_device *virt_dev;
+ struct xhci_slot_ctx *slot_ctx;
+
+ if (!command)
+ return -EINVAL;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ if (xhci->xhc_state & XHCI_STATE_DYING) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return -ESHUTDOWN;
+ }
+
+ virt_dev = xhci->devs[udev->slot_id];
+
+ ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+ if (!ctrl_ctx) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
+ xhci_reserve_host_resources(xhci, ctrl_ctx)) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_warn(xhci, "Not enough host resources, "
+ "active endpoint contexts = %u\n",
+ xhci->num_active_eps);
+ return -ENOMEM;
+ }
+ if ((xhci->quirks & XHCI_SW_BW_CHECKING) &&
+ xhci_reserve_bandwidth(xhci, virt_dev, command->in_ctx)) {
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
+ xhci_free_host_resources(xhci, ctrl_ctx);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_warn(xhci, "Not enough bandwidth\n");
+ return -ENOMEM;
+ }
+
+ slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx);
+
+ trace_xhci_configure_endpoint_ctrl_ctx(ctrl_ctx);
+ trace_xhci_configure_endpoint(slot_ctx);
+
+ if (!ctx_change)
+ ret = xhci_queue_configure_endpoint(xhci, command,
+ command->in_ctx->dma,
+ udev->slot_id, must_succeed);
+ else
+ ret = xhci_queue_evaluate_context(xhci, command,
+ command->in_ctx->dma,
+ udev->slot_id, must_succeed);
+ if (ret < 0) {
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
+ xhci_free_host_resources(xhci, ctrl_ctx);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "FIXME allocate a new ring segment");
+ return -ENOMEM;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* Wait for the configure endpoint command to complete */
+ wait_for_completion(command->completion);
+
+ if (!ctx_change)
+ ret = xhci_configure_endpoint_result(xhci, udev,
+ &command->status);
+ else
+ ret = xhci_evaluate_context_result(xhci, udev,
+ &command->status);
+
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+ spin_lock_irqsave(&xhci->lock, flags);
+ /* If the command failed, remove the reserved resources.
+ * Otherwise, clean up the estimate to include dropped eps.
+ */
+ if (ret)
+ xhci_free_host_resources(xhci, ctrl_ctx);
+ else
+ xhci_finish_resource_reservation(xhci, ctrl_ctx);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ }
+ return ret;
+}
+
+static void xhci_check_bw_drop_ep_streams(struct xhci_hcd *xhci,
+ struct xhci_virt_device *vdev, int i)
+{
+ struct xhci_virt_ep *ep = &vdev->eps[i];
+
+ if (ep->ep_state & EP_HAS_STREAMS) {
+ xhci_warn(xhci, "WARN: endpoint 0x%02x has streams on set_interface, freeing streams.\n",
+ xhci_get_endpoint_address(i));
+ xhci_free_stream_info(xhci, ep->stream_info);
+ ep->stream_info = NULL;
+ ep->ep_state &= ~EP_HAS_STREAMS;
+ }
+}
+
+/* Called after one or more calls to xhci_add_endpoint() or
+ * xhci_drop_endpoint(). If this call fails, the USB core is expected
+ * to call xhci_reset_bandwidth().
+ *
+ * Since we are in the middle of changing either configuration or
+ * installing a new alt setting, the USB core won't allow URBs to be
+ * enqueued for any endpoint on the old config or interface. Nothing
+ * else should be touching the xhci->devs[slot_id] structure, so we
+ * don't need to take the xhci->lock for manipulating that.
+ */
+int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ int i;
+ int ret = 0;
+ struct xhci_hcd *xhci;
+ struct xhci_virt_device *virt_dev;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_command *command;
+
+ ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
+ if (ret <= 0)
+ return ret;
+ xhci = hcd_to_xhci(hcd);
+ if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+ (xhci->xhc_state & XHCI_STATE_REMOVING))
+ return -ENODEV;
+
+ xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+ virt_dev = xhci->devs[udev->slot_id];
+
+ command = xhci_alloc_command(xhci, true, GFP_KERNEL);
+ if (!command)
+ return -ENOMEM;
+
+ command->in_ctx = virt_dev->in_ctx;
+
+ /* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
+ ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ ret = -ENOMEM;
+ goto command_cleanup;
+ }
+ ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+ ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG);
+ ctrl_ctx->drop_flags &= cpu_to_le32(~(SLOT_FLAG | EP0_FLAG));
+
+ /* Don't issue the command if there's no endpoints to update. */
+ if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) &&
+ ctrl_ctx->drop_flags == 0) {
+ ret = 0;
+ goto command_cleanup;
+ }
+ /* Fix up Context Entries field. Minimum value is EP0 == BIT(1). */
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ for (i = 31; i >= 1; i--) {
+ __le32 le32 = cpu_to_le32(BIT(i));
+
+ if ((virt_dev->eps[i-1].ring && !(ctrl_ctx->drop_flags & le32))
+ || (ctrl_ctx->add_flags & le32) || i == 1) {
+ slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
+ slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(i));
+ break;
+ }
+ }
+
+ ret = xhci_configure_endpoint(xhci, udev, command,
+ false, false);
+ if (ret)
+ /* Callee should call reset_bandwidth() */
+ goto command_cleanup;
+
+ /* Free any rings that were dropped, but not changed. */
+ for (i = 1; i < 31; i++) {
+ if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) &&
+ !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))) {
+ xhci_free_endpoint_ring(xhci, virt_dev, i);
+ xhci_check_bw_drop_ep_streams(xhci, virt_dev, i);
+ }
+ }
+ xhci_zero_in_ctx(xhci, virt_dev);
+ /*
+ * Install any rings for completely new endpoints or changed endpoints,
+ * and free any old rings from changed endpoints.
+ */
+ for (i = 1; i < 31; i++) {
+ if (!virt_dev->eps[i].new_ring)
+ continue;
+ /* Only free the old ring if it exists.
+ * It may not if this is the first add of an endpoint.
+ */
+ if (virt_dev->eps[i].ring) {
+ xhci_free_endpoint_ring(xhci, virt_dev, i);
+ }
+ xhci_check_bw_drop_ep_streams(xhci, virt_dev, i);
+ virt_dev->eps[i].ring = virt_dev->eps[i].new_ring;
+ virt_dev->eps[i].new_ring = NULL;
+ xhci_debugfs_create_endpoint(xhci, virt_dev, i);
+ }
+command_cleanup:
+ kfree(command->completion);
+ kfree(command);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(xhci_check_bandwidth);
+
+void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct xhci_hcd *xhci;
+ struct xhci_virt_device *virt_dev;
+ int i, ret;
+
+ ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
+ if (ret <= 0)
+ return;
+ xhci = hcd_to_xhci(hcd);
+
+ xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+ virt_dev = xhci->devs[udev->slot_id];
+ /* Free any rings allocated for added endpoints */
+ for (i = 0; i < 31; i++) {
+ if (virt_dev->eps[i].new_ring) {
+ xhci_debugfs_remove_endpoint(xhci, virt_dev, i);
+ xhci_ring_free(xhci, virt_dev->eps[i].new_ring);
+ virt_dev->eps[i].new_ring = NULL;
+ }
+ }
+ xhci_zero_in_ctx(xhci, virt_dev);
+}
+EXPORT_SYMBOL_GPL(xhci_reset_bandwidth);
+
+static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *in_ctx,
+ struct xhci_container_ctx *out_ctx,
+ struct xhci_input_control_ctx *ctrl_ctx,
+ u32 add_flags, u32 drop_flags)
+{
+ ctrl_ctx->add_flags = cpu_to_le32(add_flags);
+ ctrl_ctx->drop_flags = cpu_to_le32(drop_flags);
+ xhci_slot_copy(xhci, in_ctx, out_ctx);
+ ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+}
+
+static void xhci_endpoint_disable(struct usb_hcd *hcd,
+ struct usb_host_endpoint *host_ep)
+{
+ struct xhci_hcd *xhci;
+ struct xhci_virt_device *vdev;
+ struct xhci_virt_ep *ep;
+ struct usb_device *udev;
+ unsigned long flags;
+ unsigned int ep_index;
+
+ xhci = hcd_to_xhci(hcd);
+rescan:
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ udev = (struct usb_device *)host_ep->hcpriv;
+ if (!udev || !udev->slot_id)
+ goto done;
+
+ vdev = xhci->devs[udev->slot_id];
+ if (!vdev)
+ goto done;
+
+ ep_index = xhci_get_endpoint_index(&host_ep->desc);
+ ep = &vdev->eps[ep_index];
+
+ /* wait for hub_tt_work to finish clearing hub TT */
+ if (ep->ep_state & EP_CLEARING_TT) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ schedule_timeout_uninterruptible(1);
+ goto rescan;
+ }
+
+ if (ep->ep_state)
+ xhci_dbg(xhci, "endpoint disable with ep_state 0x%x\n",
+ ep->ep_state);
+done:
+ host_ep->hcpriv = NULL;
+ spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
+/*
+ * Called after usb core issues a clear halt control message.
+ * The host side of the halt should already be cleared by a reset endpoint
+ * command issued when the STALL event was received.
+ *
+ * The reset endpoint command may only be issued to endpoints in the halted
+ * state. For software that wishes to reset the data toggle or sequence number
+ * of an endpoint that isn't in the halted state this function will issue a
+ * configure endpoint command with the Drop and Add bits set for the target
+ * endpoint. Refer to the additional note in xhci spcification section 4.6.8.
+ */
+
+static void xhci_endpoint_reset(struct usb_hcd *hcd,
+ struct usb_host_endpoint *host_ep)
+{
+ struct xhci_hcd *xhci;
+ struct usb_device *udev;
+ struct xhci_virt_device *vdev;
+ struct xhci_virt_ep *ep;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_command *stop_cmd, *cfg_cmd;
+ unsigned int ep_index;
+ unsigned long flags;
+ u32 ep_flag;
+ int err;
+
+ xhci = hcd_to_xhci(hcd);
+ if (!host_ep->hcpriv)
+ return;
+ udev = (struct usb_device *) host_ep->hcpriv;
+ vdev = xhci->devs[udev->slot_id];
+
+ /*
+ * vdev may be lost due to xHC restore error and re-initialization
+ * during S3/S4 resume. A new vdev will be allocated later by
+ * xhci_discover_or_reset_device()
+ */
+ if (!udev->slot_id || !vdev)
+ return;
+ ep_index = xhci_get_endpoint_index(&host_ep->desc);
+ ep = &vdev->eps[ep_index];
+
+ /* Bail out if toggle is already being cleared by a endpoint reset */
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (ep->ep_state & EP_HARD_CLEAR_TOGGLE) {
+ ep->ep_state &= ~EP_HARD_CLEAR_TOGGLE;
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ /* Only interrupt and bulk ep's use data toggle, USB2 spec 5.5.4-> */
+ if (usb_endpoint_xfer_control(&host_ep->desc) ||
+ usb_endpoint_xfer_isoc(&host_ep->desc))
+ return;
+
+ ep_flag = xhci_get_endpoint_flag(&host_ep->desc);
+
+ if (ep_flag == SLOT_FLAG || ep_flag == EP0_FLAG)
+ return;
+
+ stop_cmd = xhci_alloc_command(xhci, true, GFP_NOWAIT);
+ if (!stop_cmd)
+ return;
+
+ cfg_cmd = xhci_alloc_command_with_ctx(xhci, true, GFP_NOWAIT);
+ if (!cfg_cmd)
+ goto cleanup;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ /* block queuing new trbs and ringing ep doorbell */
+ ep->ep_state |= EP_SOFT_CLEAR_TOGGLE;
+
+ /*
+ * Make sure endpoint ring is empty before resetting the toggle/seq.
+ * Driver is required to synchronously cancel all transfer request.
+ * Stop the endpoint to force xHC to update the output context
+ */
+
+ if (!list_empty(&ep->ring->td_list)) {
+ dev_err(&udev->dev, "EP not empty, refuse reset\n");
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_free_command(xhci, cfg_cmd);
+ goto cleanup;
+ }
+
+ err = xhci_queue_stop_endpoint(xhci, stop_cmd, udev->slot_id,
+ ep_index, 0);
+ if (err < 0) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_free_command(xhci, cfg_cmd);
+ xhci_dbg(xhci, "%s: Failed to queue stop ep command, %d ",
+ __func__, err);
+ goto cleanup;
+ }
+
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ wait_for_completion(stop_cmd->completion);
+
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ /* config ep command clears toggle if add and drop ep flags are set */
+ ctrl_ctx = xhci_get_input_control_ctx(cfg_cmd->in_ctx);
+ if (!ctrl_ctx) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_free_command(xhci, cfg_cmd);
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ goto cleanup;
+ }
+
+ xhci_setup_input_ctx_for_config_ep(xhci, cfg_cmd->in_ctx, vdev->out_ctx,
+ ctrl_ctx, ep_flag, ep_flag);
+ xhci_endpoint_copy(xhci, cfg_cmd->in_ctx, vdev->out_ctx, ep_index);
+
+ err = xhci_queue_configure_endpoint(xhci, cfg_cmd, cfg_cmd->in_ctx->dma,
+ udev->slot_id, false);
+ if (err < 0) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_free_command(xhci, cfg_cmd);
+ xhci_dbg(xhci, "%s: Failed to queue config ep command, %d ",
+ __func__, err);
+ goto cleanup;
+ }
+
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ wait_for_completion(cfg_cmd->completion);
+
+ xhci_free_command(xhci, cfg_cmd);
+cleanup:
+ xhci_free_command(xhci, stop_cmd);
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (ep->ep_state & EP_SOFT_CLEAR_TOGGLE)
+ ep->ep_state &= ~EP_SOFT_CLEAR_TOGGLE;
+ spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
+static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
+ struct usb_device *udev, struct usb_host_endpoint *ep,
+ unsigned int slot_id)
+{
+ int ret;
+ unsigned int ep_index;
+ unsigned int ep_state;
+
+ if (!ep)
+ return -EINVAL;
+ ret = xhci_check_args(xhci_to_hcd(xhci), udev, ep, 1, true, __func__);
+ if (ret <= 0)
+ return ret ? ret : -EINVAL;
+ if (usb_ss_max_streams(&ep->ss_ep_comp) == 0) {
+ xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion"
+ " descriptor for ep 0x%x does not support streams\n",
+ ep->desc.bEndpointAddress);
+ return -EINVAL;
+ }
+
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
+ if (ep_state & EP_HAS_STREAMS ||
+ ep_state & EP_GETTING_STREAMS) {
+ xhci_warn(xhci, "WARN: SuperSpeed bulk endpoint 0x%x "
+ "already has streams set up.\n",
+ ep->desc.bEndpointAddress);
+ xhci_warn(xhci, "Send email to xHCI maintainer and ask for "
+ "dynamic stream context array reallocation.\n");
+ return -EINVAL;
+ }
+ if (!list_empty(&xhci->devs[slot_id]->eps[ep_index].ring->td_list)) {
+ xhci_warn(xhci, "Cannot setup streams for SuperSpeed bulk "
+ "endpoint 0x%x; URBs are pending.\n",
+ ep->desc.bEndpointAddress);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void xhci_calculate_streams_entries(struct xhci_hcd *xhci,
+ unsigned int *num_streams, unsigned int *num_stream_ctxs)
+{
+ unsigned int max_streams;
+
+ /* The stream context array size must be a power of two */
+ *num_stream_ctxs = roundup_pow_of_two(*num_streams);
+ /*
+ * Find out how many primary stream array entries the host controller
+ * supports. Later we may use secondary stream arrays (similar to 2nd
+ * level page entries), but that's an optional feature for xHCI host
+ * controllers. xHCs must support at least 4 stream IDs.
+ */
+ max_streams = HCC_MAX_PSA(xhci->hcc_params);
+ if (*num_stream_ctxs > max_streams) {
+ xhci_dbg(xhci, "xHCI HW only supports %u stream ctx entries.\n",
+ max_streams);
+ *num_stream_ctxs = max_streams;
+ *num_streams = max_streams;
+ }
+}
+
+/* Returns an error code if one of the endpoint already has streams.
+ * This does not change any data structures, it only checks and gathers
+ * information.
+ */
+static int xhci_calculate_streams_and_bitmask(struct xhci_hcd *xhci,
+ struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ unsigned int *num_streams, u32 *changed_ep_bitmask)
+{
+ unsigned int max_streams;
+ unsigned int endpoint_flag;
+ int i;
+ int ret;
+
+ for (i = 0; i < num_eps; i++) {
+ ret = xhci_check_streams_endpoint(xhci, udev,
+ eps[i], udev->slot_id);
+ if (ret < 0)
+ return ret;
+
+ max_streams = usb_ss_max_streams(&eps[i]->ss_ep_comp);
+ if (max_streams < (*num_streams - 1)) {
+ xhci_dbg(xhci, "Ep 0x%x only supports %u stream IDs.\n",
+ eps[i]->desc.bEndpointAddress,
+ max_streams);
+ *num_streams = max_streams+1;
+ }
+
+ endpoint_flag = xhci_get_endpoint_flag(&eps[i]->desc);
+ if (*changed_ep_bitmask & endpoint_flag)
+ return -EINVAL;
+ *changed_ep_bitmask |= endpoint_flag;
+ }
+ return 0;
+}
+
+static u32 xhci_calculate_no_streams_bitmask(struct xhci_hcd *xhci,
+ struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps)
+{
+ u32 changed_ep_bitmask = 0;
+ unsigned int slot_id;
+ unsigned int ep_index;
+ unsigned int ep_state;
+ int i;
+
+ slot_id = udev->slot_id;
+ if (!xhci->devs[slot_id])
+ return 0;
+
+ for (i = 0; i < num_eps; i++) {
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
+ /* Are streams already being freed for the endpoint? */
+ if (ep_state & EP_GETTING_NO_STREAMS) {
+ xhci_warn(xhci, "WARN Can't disable streams for "
+ "endpoint 0x%x, "
+ "streams are being disabled already\n",
+ eps[i]->desc.bEndpointAddress);
+ return 0;
+ }
+ /* Are there actually any streams to free? */
+ if (!(ep_state & EP_HAS_STREAMS) &&
+ !(ep_state & EP_GETTING_STREAMS)) {
+ xhci_warn(xhci, "WARN Can't disable streams for "
+ "endpoint 0x%x, "
+ "streams are already disabled!\n",
+ eps[i]->desc.bEndpointAddress);
+ xhci_warn(xhci, "WARN xhci_free_streams() called "
+ "with non-streams endpoint\n");
+ return 0;
+ }
+ changed_ep_bitmask |= xhci_get_endpoint_flag(&eps[i]->desc);
+ }
+ return changed_ep_bitmask;
+}
+
+/*
+ * The USB device drivers use this function (through the HCD interface in USB
+ * core) to prepare a set of bulk endpoints to use streams. Streams are used to
+ * coordinate mass storage command queueing across multiple endpoints (basically
+ * a stream ID == a task ID).
+ *
+ * Setting up streams involves allocating the same size stream context array
+ * for each endpoint and issuing a configure endpoint command for all endpoints.
+ *
+ * Don't allow the call to succeed if one endpoint only supports one stream
+ * (which means it doesn't support streams at all).
+ *
+ * Drivers may get less stream IDs than they asked for, if the host controller
+ * hardware or endpoints claim they can't support the number of requested
+ * stream IDs.
+ */
+static int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ unsigned int num_streams, gfp_t mem_flags)
+{
+ int i, ret;
+ struct xhci_hcd *xhci;
+ struct xhci_virt_device *vdev;
+ struct xhci_command *config_cmd;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ unsigned int ep_index;
+ unsigned int num_stream_ctxs;
+ unsigned int max_packet;
+ unsigned long flags;
+ u32 changed_ep_bitmask = 0;
+
+ if (!eps)
+ return -EINVAL;
+
+ /* Add one to the number of streams requested to account for
+ * stream 0 that is reserved for xHCI usage.
+ */
+ num_streams += 1;
+ xhci = hcd_to_xhci(hcd);
+ xhci_dbg(xhci, "Driver wants %u stream IDs (including stream 0).\n",
+ num_streams);
+
+ /* MaxPSASize value 0 (2 streams) means streams are not supported */
+ if ((xhci->quirks & XHCI_BROKEN_STREAMS) ||
+ HCC_MAX_PSA(xhci->hcc_params) < 4) {
+ xhci_dbg(xhci, "xHCI controller does not support streams.\n");
+ return -ENOSYS;
+ }
+
+ config_cmd = xhci_alloc_command_with_ctx(xhci, true, mem_flags);
+ if (!config_cmd)
+ return -ENOMEM;
+
+ ctrl_ctx = xhci_get_input_control_ctx(config_cmd->in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ xhci_free_command(xhci, config_cmd);
+ return -ENOMEM;
+ }
+
+ /* Check to make sure all endpoints are not already configured for
+ * streams. While we're at it, find the maximum number of streams that
+ * all the endpoints will support and check for duplicate endpoints.
+ */
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_calculate_streams_and_bitmask(xhci, udev, eps,
+ num_eps, &num_streams, &changed_ep_bitmask);
+ if (ret < 0) {
+ xhci_free_command(xhci, config_cmd);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return ret;
+ }
+ if (num_streams <= 1) {
+ xhci_warn(xhci, "WARN: endpoints can't handle "
+ "more than one stream.\n");
+ xhci_free_command(xhci, config_cmd);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return -EINVAL;
+ }
+ vdev = xhci->devs[udev->slot_id];
+ /* Mark each endpoint as being in transition, so
+ * xhci_urb_enqueue() will reject all URBs.
+ */
+ for (i = 0; i < num_eps; i++) {
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ vdev->eps[ep_index].ep_state |= EP_GETTING_STREAMS;
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* Setup internal data structures and allocate HW data structures for
+ * streams (but don't install the HW structures in the input context
+ * until we're sure all memory allocation succeeded).
+ */
+ xhci_calculate_streams_entries(xhci, &num_streams, &num_stream_ctxs);
+ xhci_dbg(xhci, "Need %u stream ctx entries for %u stream IDs.\n",
+ num_stream_ctxs, num_streams);
+
+ for (i = 0; i < num_eps; i++) {
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ max_packet = usb_endpoint_maxp(&eps[i]->desc);
+ vdev->eps[ep_index].stream_info = xhci_alloc_stream_info(xhci,
+ num_stream_ctxs,
+ num_streams,
+ max_packet, mem_flags);
+ if (!vdev->eps[ep_index].stream_info)
+ goto cleanup;
+ /* Set maxPstreams in endpoint context and update deq ptr to
+ * point to stream context array. FIXME
+ */
+ }
+
+ /* Set up the input context for a configure endpoint command. */
+ for (i = 0; i < num_eps; i++) {
+ struct xhci_ep_ctx *ep_ctx;
+
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ ep_ctx = xhci_get_ep_ctx(xhci, config_cmd->in_ctx, ep_index);
+
+ xhci_endpoint_copy(xhci, config_cmd->in_ctx,
+ vdev->out_ctx, ep_index);
+ xhci_setup_streams_ep_input_ctx(xhci, ep_ctx,
+ vdev->eps[ep_index].stream_info);
+ }
+ /* Tell the HW to drop its old copy of the endpoint context info
+ * and add the updated copy from the input context.
+ */
+ xhci_setup_input_ctx_for_config_ep(xhci, config_cmd->in_ctx,
+ vdev->out_ctx, ctrl_ctx,
+ changed_ep_bitmask, changed_ep_bitmask);
+
+ /* Issue and wait for the configure endpoint command */
+ ret = xhci_configure_endpoint(xhci, udev, config_cmd,
+ false, false);
+
+ /* xHC rejected the configure endpoint command for some reason, so we
+ * leave the old ring intact and free our internal streams data
+ * structure.
+ */
+ if (ret < 0)
+ goto cleanup;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ for (i = 0; i < num_eps; i++) {
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ vdev->eps[ep_index].ep_state &= ~EP_GETTING_STREAMS;
+ xhci_dbg(xhci, "Slot %u ep ctx %u now has streams.\n",
+ udev->slot_id, ep_index);
+ vdev->eps[ep_index].ep_state |= EP_HAS_STREAMS;
+ }
+ xhci_free_command(xhci, config_cmd);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ for (i = 0; i < num_eps; i++) {
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ xhci_debugfs_create_stream_files(xhci, vdev, ep_index);
+ }
+ /* Subtract 1 for stream 0, which drivers can't use */
+ return num_streams - 1;
+
+cleanup:
+ /* If it didn't work, free the streams! */
+ for (i = 0; i < num_eps; i++) {
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ xhci_free_stream_info(xhci, vdev->eps[ep_index].stream_info);
+ vdev->eps[ep_index].stream_info = NULL;
+ /* FIXME Unset maxPstreams in endpoint context and
+ * update deq ptr to point to normal string ring.
+ */
+ vdev->eps[ep_index].ep_state &= ~EP_GETTING_STREAMS;
+ vdev->eps[ep_index].ep_state &= ~EP_HAS_STREAMS;
+ xhci_endpoint_zero(xhci, vdev, eps[i]);
+ }
+ xhci_free_command(xhci, config_cmd);
+ return -ENOMEM;
+}
+
+/* Transition the endpoint from using streams to being a "normal" endpoint
+ * without streams.
+ *
+ * Modify the endpoint context state, submit a configure endpoint command,
+ * and free all endpoint rings for streams if that completes successfully.
+ */
+static int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ gfp_t mem_flags)
+{
+ int i, ret;
+ struct xhci_hcd *xhci;
+ struct xhci_virt_device *vdev;
+ struct xhci_command *command;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ unsigned int ep_index;
+ unsigned long flags;
+ u32 changed_ep_bitmask;
+
+ xhci = hcd_to_xhci(hcd);
+ vdev = xhci->devs[udev->slot_id];
+
+ /* Set up a configure endpoint command to remove the streams rings */
+ spin_lock_irqsave(&xhci->lock, flags);
+ changed_ep_bitmask = xhci_calculate_no_streams_bitmask(xhci,
+ udev, eps, num_eps);
+ if (changed_ep_bitmask == 0) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return -EINVAL;
+ }
+
+ /* Use the xhci_command structure from the first endpoint. We may have
+ * allocated too many, but the driver may call xhci_free_streams() for
+ * each endpoint it grouped into one call to xhci_alloc_streams().
+ */
+ ep_index = xhci_get_endpoint_index(&eps[0]->desc);
+ command = vdev->eps[ep_index].stream_info->free_streams_command;
+ ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+ if (!ctrl_ctx) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < num_eps; i++) {
+ struct xhci_ep_ctx *ep_ctx;
+
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index);
+ xhci->devs[udev->slot_id]->eps[ep_index].ep_state |=
+ EP_GETTING_NO_STREAMS;
+
+ xhci_endpoint_copy(xhci, command->in_ctx,
+ vdev->out_ctx, ep_index);
+ xhci_setup_no_streams_ep_input_ctx(ep_ctx,
+ &vdev->eps[ep_index]);
+ }
+ xhci_setup_input_ctx_for_config_ep(xhci, command->in_ctx,
+ vdev->out_ctx, ctrl_ctx,
+ changed_ep_bitmask, changed_ep_bitmask);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* Issue and wait for the configure endpoint command,
+ * which must succeed.
+ */
+ ret = xhci_configure_endpoint(xhci, udev, command,
+ false, true);
+
+ /* xHC rejected the configure endpoint command for some reason, so we
+ * leave the streams rings intact.
+ */
+ if (ret < 0)
+ return ret;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ for (i = 0; i < num_eps; i++) {
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ xhci_free_stream_info(xhci, vdev->eps[ep_index].stream_info);
+ vdev->eps[ep_index].stream_info = NULL;
+ /* FIXME Unset maxPstreams in endpoint context and
+ * update deq ptr to point to normal string ring.
+ */
+ vdev->eps[ep_index].ep_state &= ~EP_GETTING_NO_STREAMS;
+ vdev->eps[ep_index].ep_state &= ~EP_HAS_STREAMS;
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ return 0;
+}
+
+/*
+ * Deletes endpoint resources for endpoints that were active before a Reset
+ * Device command, or a Disable Slot command. The Reset Device command leaves
+ * the control endpoint intact, whereas the Disable Slot command deletes it.
+ *
+ * Must be called with xhci->lock held.
+ */
+void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev, bool drop_control_ep)
+{
+ int i;
+ unsigned int num_dropped_eps = 0;
+ unsigned int drop_flags = 0;
+
+ for (i = (drop_control_ep ? 0 : 1); i < 31; i++) {
+ if (virt_dev->eps[i].ring) {
+ drop_flags |= 1 << i;
+ num_dropped_eps++;
+ }
+ }
+ xhci->num_active_eps -= num_dropped_eps;
+ if (num_dropped_eps)
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "Dropped %u ep ctxs, flags = 0x%x, "
+ "%u now active.",
+ num_dropped_eps, drop_flags,
+ xhci->num_active_eps);
+}
+
+/*
+ * This submits a Reset Device Command, which will set the device state to 0,
+ * set the device address to 0, and disable all the endpoints except the default
+ * control endpoint. The USB core should come back and call
+ * xhci_address_device(), and then re-set up the configuration. If this is
+ * called because of a usb_reset_and_verify_device(), then the old alternate
+ * settings will be re-installed through the normal bandwidth allocation
+ * functions.
+ *
+ * Wait for the Reset Device command to finish. Remove all structures
+ * associated with the endpoints that were disabled. Clear the input device
+ * structure? Reset the control endpoint 0 max packet size?
+ *
+ * If the virt_dev to be reset does not exist or does not match the udev,
+ * it means the device is lost, possibly due to the xHC restore error and
+ * re-initialization during S3/S4. In this case, call xhci_alloc_dev() to
+ * re-allocate the device.
+ */
+static int xhci_discover_or_reset_device(struct usb_hcd *hcd,
+ struct usb_device *udev)
+{
+ int ret, i;
+ unsigned long flags;
+ struct xhci_hcd *xhci;
+ unsigned int slot_id;
+ struct xhci_virt_device *virt_dev;
+ struct xhci_command *reset_device_cmd;
+ struct xhci_slot_ctx *slot_ctx;
+ int old_active_eps = 0;
+
+ ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__);
+ if (ret <= 0)
+ return ret;
+ xhci = hcd_to_xhci(hcd);
+ slot_id = udev->slot_id;
+ virt_dev = xhci->devs[slot_id];
+ if (!virt_dev) {
+ xhci_dbg(xhci, "The device to be reset with slot ID %u does "
+ "not exist. Re-allocate the device\n", slot_id);
+ ret = xhci_alloc_dev(hcd, udev);
+ if (ret == 1)
+ return 0;
+ else
+ return -EINVAL;
+ }
+
+ if (virt_dev->tt_info)
+ old_active_eps = virt_dev->tt_info->active_eps;
+
+ if (virt_dev->udev != udev) {
+ /* If the virt_dev and the udev does not match, this virt_dev
+ * may belong to another udev.
+ * Re-allocate the device.
+ */
+ xhci_dbg(xhci, "The device to be reset with slot ID %u does "
+ "not match the udev. Re-allocate the device\n",
+ slot_id);
+ ret = xhci_alloc_dev(hcd, udev);
+ if (ret == 1)
+ return 0;
+ else
+ return -EINVAL;
+ }
+
+ /* If device is not setup, there is no point in resetting it */
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+ if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) ==
+ SLOT_STATE_DISABLED)
+ return 0;
+
+ trace_xhci_discover_or_reset_device(slot_ctx);
+
+ xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);
+ /* Allocate the command structure that holds the struct completion.
+ * Assume we're in process context, since the normal device reset
+ * process has to wait for the device anyway. Storage devices are
+ * reset as part of error handling, so use GFP_NOIO instead of
+ * GFP_KERNEL.
+ */
+ reset_device_cmd = xhci_alloc_command(xhci, true, GFP_NOIO);
+ if (!reset_device_cmd) {
+ xhci_dbg(xhci, "Couldn't allocate command structure.\n");
+ return -ENOMEM;
+ }
+
+ /* Attempt to submit the Reset Device command to the command ring */
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ ret = xhci_queue_reset_device(xhci, reset_device_cmd, slot_id);
+ if (ret) {
+ xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ goto command_cleanup;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* Wait for the Reset Device command to finish */
+ wait_for_completion(reset_device_cmd->completion);
+
+ /* The Reset Device command can't fail, according to the 0.95/0.96 spec,
+ * unless we tried to reset a slot ID that wasn't enabled,
+ * or the device wasn't in the addressed or configured state.
+ */
+ ret = reset_device_cmd->status;
+ switch (ret) {
+ case COMP_COMMAND_ABORTED:
+ case COMP_COMMAND_RING_STOPPED:
+ xhci_warn(xhci, "Timeout waiting for reset device command\n");
+ ret = -ETIME;
+ goto command_cleanup;
+ case COMP_SLOT_NOT_ENABLED_ERROR: /* 0.95 completion for bad slot ID */
+ case COMP_CONTEXT_STATE_ERROR: /* 0.96 completion code for same thing */
+ xhci_dbg(xhci, "Can't reset device (slot ID %u) in %s state\n",
+ slot_id,
+ xhci_get_slot_state(xhci, virt_dev->out_ctx));
+ xhci_dbg(xhci, "Not freeing device rings.\n");
+ /* Don't treat this as an error. May change my mind later. */
+ ret = 0;
+ goto command_cleanup;
+ case COMP_SUCCESS:
+ xhci_dbg(xhci, "Successful reset device command.\n");
+ break;
+ default:
+ if (xhci_is_vendor_info_code(xhci, ret))
+ break;
+ xhci_warn(xhci, "Unknown completion code %u for "
+ "reset device command.\n", ret);
+ ret = -EINVAL;
+ goto command_cleanup;
+ }
+
+ /* Free up host controller endpoint resources */
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+ spin_lock_irqsave(&xhci->lock, flags);
+ /* Don't delete the default control endpoint resources */
+ xhci_free_device_endpoint_resources(xhci, virt_dev, false);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ }
+
+ /* Everything but endpoint 0 is disabled, so free the rings. */
+ for (i = 1; i < 31; i++) {
+ struct xhci_virt_ep *ep = &virt_dev->eps[i];
+
+ if (ep->ep_state & EP_HAS_STREAMS) {
+ xhci_warn(xhci, "WARN: endpoint 0x%02x has streams on device reset, freeing streams.\n",
+ xhci_get_endpoint_address(i));
+ xhci_free_stream_info(xhci, ep->stream_info);
+ ep->stream_info = NULL;
+ ep->ep_state &= ~EP_HAS_STREAMS;
+ }
+
+ if (ep->ring) {
+ xhci_debugfs_remove_endpoint(xhci, virt_dev, i);
+ xhci_free_endpoint_ring(xhci, virt_dev, i);
+ }
+ if (!list_empty(&virt_dev->eps[i].bw_endpoint_list))
+ xhci_drop_ep_from_interval_table(xhci,
+ &virt_dev->eps[i].bw_info,
+ virt_dev->bw_table,
+ udev,
+ &virt_dev->eps[i],
+ virt_dev->tt_info);
+ xhci_clear_endpoint_bw_info(&virt_dev->eps[i].bw_info);
+ }
+ /* If necessary, update the number of active TTs on this root port */
+ xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps);
+ virt_dev->flags = 0;
+ ret = 0;
+
+command_cleanup:
+ xhci_free_command(xhci, reset_device_cmd);
+ return ret;
+}
+
+/*
+ * At this point, the struct usb_device is about to go away, the device has
+ * disconnected, and all traffic has been stopped and the endpoints have been
+ * disabled. Free any HC data structures associated with that device.
+ */
+static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct xhci_virt_device *virt_dev;
+ struct xhci_slot_ctx *slot_ctx;
+ unsigned long flags;
+ int i, ret;
+
+ /*
+ * We called pm_runtime_get_noresume when the device was attached.
+ * Decrement the counter here to allow controller to runtime suspend
+ * if no devices remain.
+ */
+ if (xhci->quirks & XHCI_RESET_ON_RESUME)
+ pm_runtime_put_noidle(hcd->self.controller);
+
+ ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
+ /* If the host is halted due to driver unload, we still need to free the
+ * device.
+ */
+ if (ret <= 0 && ret != -ENODEV)
+ return;
+
+ virt_dev = xhci->devs[udev->slot_id];
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+ trace_xhci_free_dev(slot_ctx);
+
+ /* Stop any wayward timer functions (which may grab the lock) */
+ for (i = 0; i < 31; i++)
+ virt_dev->eps[i].ep_state &= ~EP_STOP_CMD_PENDING;
+ virt_dev->udev = NULL;
+ xhci_disable_slot(xhci, udev->slot_id);
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ xhci_free_virt_device(xhci, udev->slot_id);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+}
+
+int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id)
+{
+ struct xhci_command *command;
+ unsigned long flags;
+ u32 state;
+ int ret;
+
+ command = xhci_alloc_command(xhci, true, GFP_KERNEL);
+ if (!command)
+ return -ENOMEM;
+
+ xhci_debugfs_remove_slot(xhci, slot_id);
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ /* Don't disable the slot if the host controller is dead. */
+ state = readl(&xhci->op_regs->status);
+ if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING) ||
+ (xhci->xhc_state & XHCI_STATE_HALTED)) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ kfree(command);
+ return -ENODEV;
+ }
+
+ ret = xhci_queue_slot_control(xhci, command, TRB_DISABLE_SLOT,
+ slot_id);
+ if (ret) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ kfree(command);
+ return ret;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ wait_for_completion(command->completion);
+
+ if (command->status != COMP_SUCCESS)
+ xhci_warn(xhci, "Unsuccessful disable slot %u command, status %d\n",
+ slot_id, command->status);
+
+ xhci_free_command(xhci, command);
+
+ return 0;
+}
+
+/*
+ * Checks if we have enough host controller resources for the default control
+ * endpoint.
+ *
+ * Must be called with xhci->lock held.
+ */
+static int xhci_reserve_host_control_ep_resources(struct xhci_hcd *xhci)
+{
+ if (xhci->num_active_eps + 1 > xhci->limit_active_eps) {
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "Not enough ep ctxs: "
+ "%u active, need to add 1, limit is %u.",
+ xhci->num_active_eps, xhci->limit_active_eps);
+ return -ENOMEM;
+ }
+ xhci->num_active_eps += 1;
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "Adding 1 ep ctx, %u now active.",
+ xhci->num_active_eps);
+ return 0;
+}
+
+
+/*
+ * Returns 0 if the xHC ran out of device slots, the Enable Slot command
+ * timed out, or allocating memory failed. Returns 1 on success.
+ */
+int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct xhci_virt_device *vdev;
+ struct xhci_slot_ctx *slot_ctx;
+ unsigned long flags;
+ int ret, slot_id;
+ struct xhci_command *command;
+
+ command = xhci_alloc_command(xhci, true, GFP_KERNEL);
+ if (!command)
+ return 0;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_queue_slot_control(xhci, command, TRB_ENABLE_SLOT, 0);
+ if (ret) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+ xhci_free_command(xhci, command);
+ return 0;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ wait_for_completion(command->completion);
+ slot_id = command->slot_id;
+
+ if (!slot_id || command->status != COMP_SUCCESS) {
+ xhci_err(xhci, "Error while assigning device slot ID: %s\n",
+ xhci_trb_comp_code_string(command->status));
+ xhci_err(xhci, "Max number of devices this xHCI host supports is %u.\n",
+ HCS_MAX_SLOTS(
+ readl(&xhci->cap_regs->hcs_params1)));
+ xhci_free_command(xhci, command);
+ return 0;
+ }
+
+ xhci_free_command(xhci, command);
+
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_reserve_host_control_ep_resources(xhci);
+ if (ret) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_warn(xhci, "Not enough host resources, "
+ "active endpoint contexts = %u\n",
+ xhci->num_active_eps);
+ goto disable_slot;
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ }
+ /* Use GFP_NOIO, since this function can be called from
+ * xhci_discover_or_reset_device(), which may be called as part of
+ * mass storage driver error handling.
+ */
+ if (!xhci_alloc_virt_device(xhci, slot_id, udev, GFP_NOIO)) {
+ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
+ goto disable_slot;
+ }
+ vdev = xhci->devs[slot_id];
+ slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
+ trace_xhci_alloc_dev(slot_ctx);
+
+ udev->slot_id = slot_id;
+
+ xhci_debugfs_create_slot(xhci, slot_id);
+
+ /*
+ * If resetting upon resume, we can't put the controller into runtime
+ * suspend if there is a device attached.
+ */
+ if (xhci->quirks & XHCI_RESET_ON_RESUME)
+ pm_runtime_get_noresume(hcd->self.controller);
+
+ /* Is this a LS or FS device under a HS hub? */
+ /* Hub or peripherial? */
+ return 1;
+
+disable_slot:
+ xhci_disable_slot(xhci, udev->slot_id);
+ xhci_free_virt_device(xhci, udev->slot_id);
+
+ return 0;
+}
+
+/*
+ * Issue an Address Device command and optionally send a corresponding
+ * SetAddress request to the device.
+ */
+static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
+ enum xhci_setup_dev setup)
+{
+ const char *act = setup == SETUP_CONTEXT_ONLY ? "context" : "address";
+ unsigned long flags;
+ struct xhci_virt_device *virt_dev;
+ int ret = 0;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ u64 temp_64;
+ struct xhci_command *command = NULL;
+
+ mutex_lock(&xhci->mutex);
+
+ if (xhci->xhc_state) { /* dying, removing or halted */
+ ret = -ESHUTDOWN;
+ goto out;
+ }
+
+ if (!udev->slot_id) {
+ xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+ "Bad Slot ID %d", udev->slot_id);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ virt_dev = xhci->devs[udev->slot_id];
+
+ if (WARN_ON(!virt_dev)) {
+ /*
+ * In plug/unplug torture test with an NEC controller,
+ * a zero-dereference was observed once due to virt_dev = 0.
+ * Print useful debug rather than crash if it is observed again!
+ */
+ xhci_warn(xhci, "Virt dev invalid for slot_id 0x%x!\n",
+ udev->slot_id);
+ ret = -EINVAL;
+ goto out;
+ }
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+ trace_xhci_setup_device_slot(slot_ctx);
+
+ if (setup == SETUP_CONTEXT_ONLY) {
+ if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) ==
+ SLOT_STATE_DEFAULT) {
+ xhci_dbg(xhci, "Slot already in default state\n");
+ goto out;
+ }
+ }
+
+ command = xhci_alloc_command(xhci, true, GFP_KERNEL);
+ if (!command) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ command->in_ctx = virt_dev->in_ctx;
+
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+ /*
+ * If this is the first Set Address since device plug-in or
+ * virt_device realloaction after a resume with an xHCI power loss,
+ * then set up the slot context.
+ */
+ if (!slot_ctx->dev_info)
+ xhci_setup_addressable_virt_dev(xhci, udev);
+ /* Otherwise, update the control endpoint ring enqueue pointer. */
+ else
+ xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
+ ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
+ ctrl_ctx->drop_flags = 0;
+
+ trace_xhci_address_ctx(xhci, virt_dev->in_ctx,
+ le32_to_cpu(slot_ctx->dev_info) >> 27);
+
+ trace_xhci_address_ctrl_ctx(ctrl_ctx);
+ spin_lock_irqsave(&xhci->lock, flags);
+ trace_xhci_setup_device(virt_dev);
+ ret = xhci_queue_address_device(xhci, command, virt_dev->in_ctx->dma,
+ udev->slot_id, setup);
+ if (ret) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+ "FIXME: allocate a command ring segment");
+ goto out;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */
+ wait_for_completion(command->completion);
+
+ /* FIXME: From section 4.3.4: "Software shall be responsible for timing
+ * the SetAddress() "recovery interval" required by USB and aborting the
+ * command on a timeout.
+ */
+ switch (command->status) {
+ case COMP_COMMAND_ABORTED:
+ case COMP_COMMAND_RING_STOPPED:
+ xhci_warn(xhci, "Timeout while waiting for setup device command\n");
+ ret = -ETIME;
+ break;
+ case COMP_CONTEXT_STATE_ERROR:
+ case COMP_SLOT_NOT_ENABLED_ERROR:
+ xhci_err(xhci, "Setup ERROR: setup %s command for slot %d.\n",
+ act, udev->slot_id);
+ ret = -EINVAL;
+ break;
+ case COMP_USB_TRANSACTION_ERROR:
+ dev_warn(&udev->dev, "Device not responding to setup %s.\n", act);
+
+ mutex_unlock(&xhci->mutex);
+ ret = xhci_disable_slot(xhci, udev->slot_id);
+ xhci_free_virt_device(xhci, udev->slot_id);
+ if (!ret)
+ xhci_alloc_dev(hcd, udev);
+ kfree(command->completion);
+ kfree(command);
+ return -EPROTO;
+ case COMP_INCOMPATIBLE_DEVICE_ERROR:
+ dev_warn(&udev->dev,
+ "ERROR: Incompatible device for setup %s command\n", act);
+ ret = -ENODEV;
+ break;
+ case COMP_SUCCESS:
+ xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+ "Successful setup %s command", act);
+ break;
+ default:
+ xhci_err(xhci,
+ "ERROR: unexpected setup %s command completion code 0x%x.\n",
+ act, command->status);
+ trace_xhci_address_ctx(xhci, virt_dev->out_ctx, 1);
+ ret = -EINVAL;
+ break;
+ }
+ if (ret)
+ goto out;
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+ "Op regs DCBAA ptr = %#016llx", temp_64);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+ "Slot ID %d dcbaa entry @%p = %#016llx",
+ udev->slot_id,
+ &xhci->dcbaa->dev_context_ptrs[udev->slot_id],
+ (unsigned long long)
+ le64_to_cpu(xhci->dcbaa->dev_context_ptrs[udev->slot_id]));
+ xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+ "Output Context DMA address = %#08llx",
+ (unsigned long long)virt_dev->out_ctx->dma);
+ trace_xhci_address_ctx(xhci, virt_dev->in_ctx,
+ le32_to_cpu(slot_ctx->dev_info) >> 27);
+ /*
+ * USB core uses address 1 for the roothubs, so we add one to the
+ * address given back to us by the HC.
+ */
+ trace_xhci_address_ctx(xhci, virt_dev->out_ctx,
+ le32_to_cpu(slot_ctx->dev_info) >> 27);
+ /* Zero the input context control for later use */
+ ctrl_ctx->add_flags = 0;
+ ctrl_ctx->drop_flags = 0;
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+ udev->devaddr = (u8)(le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK);
+
+ xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+ "Internal device address = %d",
+ le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK);
+out:
+ mutex_unlock(&xhci->mutex);
+ if (command) {
+ kfree(command->completion);
+ kfree(command);
+ }
+ return ret;
+}
+
+static int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ return xhci_setup_device(hcd, udev, SETUP_CONTEXT_ADDRESS);
+}
+
+static int xhci_enable_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ return xhci_setup_device(hcd, udev, SETUP_CONTEXT_ONLY);
+}
+
+/*
+ * Transfer the port index into real index in the HW port status
+ * registers. Caculate offset between the port's PORTSC register
+ * and port status base. Divide the number of per port register
+ * to get the real index. The raw port number bases 1.
+ */
+int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1)
+{
+ struct xhci_hub *rhub;
+
+ rhub = xhci_get_rhub(hcd);
+ return rhub->ports[port1 - 1]->hw_portnum + 1;
+}
+
+/*
+ * Issue an Evaluate Context command to change the Maximum Exit Latency in the
+ * slot context. If that succeeds, store the new MEL in the xhci_virt_device.
+ */
+static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
+ struct usb_device *udev, u16 max_exit_latency)
+{
+ struct xhci_virt_device *virt_dev;
+ struct xhci_command *command;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ unsigned long flags;
+ int ret;
+
+ command = xhci_alloc_command_with_ctx(xhci, true, GFP_KERNEL);
+ if (!command)
+ return -ENOMEM;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ virt_dev = xhci->devs[udev->slot_id];
+
+ /*
+ * virt_dev might not exists yet if xHC resumed from hibernate (S4) and
+ * xHC was re-initialized. Exit latency will be set later after
+ * hub_port_finish_reset() is done and xhci->devs[] are re-allocated
+ */
+
+ if (!virt_dev || max_exit_latency == virt_dev->current_mel) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_free_command(xhci, command);
+ return 0;
+ }
+
+ /* Attempt to issue an Evaluate Context command to change the MEL. */
+ ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+ if (!ctrl_ctx) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_free_command(xhci, command);
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ xhci_slot_copy(xhci, command->in_ctx, virt_dev->out_ctx);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+ slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx);
+ slot_ctx->dev_info2 &= cpu_to_le32(~((u32) MAX_EXIT));
+ slot_ctx->dev_info2 |= cpu_to_le32(max_exit_latency);
+ slot_ctx->dev_state = 0;
+
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "Set up evaluate context for LPM MEL change.");
+
+ /* Issue and wait for the evaluate context command. */
+ ret = xhci_configure_endpoint(xhci, udev, command,
+ true, true);
+
+ if (!ret) {
+ spin_lock_irqsave(&xhci->lock, flags);
+ virt_dev->current_mel = max_exit_latency;
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ }
+
+ xhci_free_command(xhci, command);
+
+ return ret;
+}
+
+#ifdef CONFIG_PM
+
+/* BESL to HIRD Encoding array for USB2 LPM */
+static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000,
+ 3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000};
+
+/* Calculate HIRD/BESL for USB2 PORTPMSC*/
+static int xhci_calculate_hird_besl(struct xhci_hcd *xhci,
+ struct usb_device *udev)
+{
+ int u2del, besl, besl_host;
+ int besl_device = 0;
+ u32 field;
+
+ u2del = HCS_U2_LATENCY(xhci->hcs_params3);
+ field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
+
+ if (field & USB_BESL_SUPPORT) {
+ for (besl_host = 0; besl_host < 16; besl_host++) {
+ if (xhci_besl_encoding[besl_host] >= u2del)
+ break;
+ }
+ /* Use baseline BESL value as default */
+ if (field & USB_BESL_BASELINE_VALID)
+ besl_device = USB_GET_BESL_BASELINE(field);
+ else if (field & USB_BESL_DEEP_VALID)
+ besl_device = USB_GET_BESL_DEEP(field);
+ } else {
+ if (u2del <= 50)
+ besl_host = 0;
+ else
+ besl_host = (u2del - 51) / 75 + 1;
+ }
+
+ besl = besl_host + besl_device;
+ if (besl > 15)
+ besl = 15;
+
+ return besl;
+}
+
+/* Calculate BESLD, L1 timeout and HIRDM for USB2 PORTHLPMC */
+static int xhci_calculate_usb2_hw_lpm_params(struct usb_device *udev)
+{
+ u32 field;
+ int l1;
+ int besld = 0;
+ int hirdm = 0;
+
+ field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
+
+ /* xHCI l1 is set in steps of 256us, xHCI 1.0 section 5.4.11.2 */
+ l1 = udev->l1_params.timeout / 256;
+
+ /* device has preferred BESLD */
+ if (field & USB_BESL_DEEP_VALID) {
+ besld = USB_GET_BESL_DEEP(field);
+ hirdm = 1;
+ }
+
+ return PORT_BESLD(besld) | PORT_L1_TIMEOUT(l1) | PORT_HIRDM(hirdm);
+}
+
+static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
+ struct usb_device *udev, int enable)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct xhci_port **ports;
+ __le32 __iomem *pm_addr, *hlpm_addr;
+ u32 pm_val, hlpm_val, field;
+ unsigned int port_num;
+ unsigned long flags;
+ int hird, exit_latency;
+ int ret;
+
+ if (xhci->quirks & XHCI_HW_LPM_DISABLE)
+ return -EPERM;
+
+ if (hcd->speed >= HCD_USB3 || !xhci->hw_lpm_support ||
+ !udev->lpm_capable)
+ return -EPERM;
+
+ if (!udev->parent || udev->parent->parent ||
+ udev->descriptor.bDeviceClass == USB_CLASS_HUB)
+ return -EPERM;
+
+ if (udev->usb2_hw_lpm_capable != 1)
+ return -EPERM;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ ports = xhci->usb2_rhub.ports;
+ port_num = udev->portnum - 1;
+ pm_addr = ports[port_num]->addr + PORTPMSC;
+ pm_val = readl(pm_addr);
+ hlpm_addr = ports[port_num]->addr + PORTHLPMC;
+
+ xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
+ enable ? "enable" : "disable", port_num + 1);
+
+ if (enable) {
+ /* Host supports BESL timeout instead of HIRD */
+ if (udev->usb2_hw_lpm_besl_capable) {
+ /* if device doesn't have a preferred BESL value use a
+ * default one which works with mixed HIRD and BESL
+ * systems. See XHCI_DEFAULT_BESL definition in xhci.h
+ */
+ field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
+ if ((field & USB_BESL_SUPPORT) &&
+ (field & USB_BESL_BASELINE_VALID))
+ hird = USB_GET_BESL_BASELINE(field);
+ else
+ hird = udev->l1_params.besl;
+
+ exit_latency = xhci_besl_encoding[hird];
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ ret = xhci_change_max_exit_latency(xhci, udev,
+ exit_latency);
+ if (ret < 0)
+ return ret;
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ hlpm_val = xhci_calculate_usb2_hw_lpm_params(udev);
+ writel(hlpm_val, hlpm_addr);
+ /* flush write */
+ readl(hlpm_addr);
+ } else {
+ hird = xhci_calculate_hird_besl(xhci, udev);
+ }
+
+ pm_val &= ~PORT_HIRD_MASK;
+ pm_val |= PORT_HIRD(hird) | PORT_RWE | PORT_L1DS(udev->slot_id);
+ writel(pm_val, pm_addr);
+ pm_val = readl(pm_addr);
+ pm_val |= PORT_HLE;
+ writel(pm_val, pm_addr);
+ /* flush write */
+ readl(pm_addr);
+ } else {
+ pm_val &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK | PORT_L1DS_MASK);
+ writel(pm_val, pm_addr);
+ /* flush write */
+ readl(pm_addr);
+ if (udev->usb2_hw_lpm_besl_capable) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_change_max_exit_latency(xhci, udev, 0);
+ readl_poll_timeout(ports[port_num]->addr, pm_val,
+ (pm_val & PORT_PLS_MASK) == XDEV_U0,
+ 100, 10000);
+ return 0;
+ }
+ }
+
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return 0;
+}
+
+/* check if a usb2 port supports a given extened capability protocol
+ * only USB2 ports extended protocol capability values are cached.
+ * Return 1 if capability is supported
+ */
+static int xhci_check_usb2_port_capability(struct xhci_hcd *xhci, int port,
+ unsigned capability)
+{
+ u32 port_offset, port_count;
+ int i;
+
+ for (i = 0; i < xhci->num_ext_caps; i++) {
+ if (xhci->ext_caps[i] & capability) {
+ /* port offsets starts at 1 */
+ port_offset = XHCI_EXT_PORT_OFF(xhci->ext_caps[i]) - 1;
+ port_count = XHCI_EXT_PORT_COUNT(xhci->ext_caps[i]);
+ if (port >= port_offset &&
+ port < port_offset + port_count)
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ int portnum = udev->portnum - 1;
+
+ if (hcd->speed >= HCD_USB3 || !udev->lpm_capable)
+ return 0;
+
+ /* we only support lpm for non-hub device connected to root hub yet */
+ if (!udev->parent || udev->parent->parent ||
+ udev->descriptor.bDeviceClass == USB_CLASS_HUB)
+ return 0;
+
+ if (xhci->hw_lpm_support == 1 &&
+ xhci_check_usb2_port_capability(
+ xhci, portnum, XHCI_HLC)) {
+ udev->usb2_hw_lpm_capable = 1;
+ udev->l1_params.timeout = XHCI_L1_TIMEOUT;
+ udev->l1_params.besl = XHCI_DEFAULT_BESL;
+ if (xhci_check_usb2_port_capability(xhci, portnum,
+ XHCI_BLC))
+ udev->usb2_hw_lpm_besl_capable = 1;
+ }
+
+ return 0;
+}
+
+/*---------------------- USB 3.0 Link PM functions ------------------------*/
+
+/* Service interval in nanoseconds = 2^(bInterval - 1) * 125us * 1000ns / 1us */
+static unsigned long long xhci_service_interval_to_ns(
+ struct usb_endpoint_descriptor *desc)
+{
+ return (1ULL << (desc->bInterval - 1)) * 125 * 1000;
+}
+
+static u16 xhci_get_timeout_no_hub_lpm(struct usb_device *udev,
+ enum usb3_link_state state)
+{
+ unsigned long long sel;
+ unsigned long long pel;
+ unsigned int max_sel_pel;
+ char *state_name;
+
+ switch (state) {
+ case USB3_LPM_U1:
+ /* Convert SEL and PEL stored in nanoseconds to microseconds */
+ sel = DIV_ROUND_UP(udev->u1_params.sel, 1000);
+ pel = DIV_ROUND_UP(udev->u1_params.pel, 1000);
+ max_sel_pel = USB3_LPM_MAX_U1_SEL_PEL;
+ state_name = "U1";
+ break;
+ case USB3_LPM_U2:
+ sel = DIV_ROUND_UP(udev->u2_params.sel, 1000);
+ pel = DIV_ROUND_UP(udev->u2_params.pel, 1000);
+ max_sel_pel = USB3_LPM_MAX_U2_SEL_PEL;
+ state_name = "U2";
+ break;
+ default:
+ dev_warn(&udev->dev, "%s: Can't get timeout for non-U1 or U2 state.\n",
+ __func__);
+ return USB3_LPM_DISABLED;
+ }
+
+ if (sel <= max_sel_pel && pel <= max_sel_pel)
+ return USB3_LPM_DEVICE_INITIATED;
+
+ if (sel > max_sel_pel)
+ dev_dbg(&udev->dev, "Device-initiated %s disabled "
+ "due to long SEL %llu ms\n",
+ state_name, sel);
+ else
+ dev_dbg(&udev->dev, "Device-initiated %s disabled "
+ "due to long PEL %llu ms\n",
+ state_name, pel);
+ return USB3_LPM_DISABLED;
+}
+
+/* The U1 timeout should be the maximum of the following values:
+ * - For control endpoints, U1 system exit latency (SEL) * 3
+ * - For bulk endpoints, U1 SEL * 5
+ * - For interrupt endpoints:
+ * - Notification EPs, U1 SEL * 3
+ * - Periodic EPs, max(105% of bInterval, U1 SEL * 2)
+ * - For isochronous endpoints, max(105% of bInterval, U1 SEL * 2)
+ */
+static unsigned long long xhci_calculate_intel_u1_timeout(
+ struct usb_device *udev,
+ struct usb_endpoint_descriptor *desc)
+{
+ unsigned long long timeout_ns;
+ int ep_type;
+ int intr_type;
+
+ ep_type = usb_endpoint_type(desc);
+ switch (ep_type) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ timeout_ns = udev->u1_params.sel * 3;
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ timeout_ns = udev->u1_params.sel * 5;
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ intr_type = usb_endpoint_interrupt_type(desc);
+ if (intr_type == USB_ENDPOINT_INTR_NOTIFICATION) {
+ timeout_ns = udev->u1_params.sel * 3;
+ break;
+ }
+ /* Otherwise the calculation is the same as isoc eps */
+ fallthrough;
+ case USB_ENDPOINT_XFER_ISOC:
+ timeout_ns = xhci_service_interval_to_ns(desc);
+ timeout_ns = DIV_ROUND_UP_ULL(timeout_ns * 105, 100);
+ if (timeout_ns < udev->u1_params.sel * 2)
+ timeout_ns = udev->u1_params.sel * 2;
+ break;
+ default:
+ return 0;
+ }
+
+ return timeout_ns;
+}
+
+/* Returns the hub-encoded U1 timeout value. */
+static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci,
+ struct usb_device *udev,
+ struct usb_endpoint_descriptor *desc)
+{
+ unsigned long long timeout_ns;
+
+ /* Prevent U1 if service interval is shorter than U1 exit latency */
+ if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
+ if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) {
+ dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n");
+ return USB3_LPM_DISABLED;
+ }
+ }
+
+ if (xhci->quirks & XHCI_INTEL_HOST)
+ timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
+ else
+ timeout_ns = udev->u1_params.sel;
+
+ /* The U1 timeout is encoded in 1us intervals.
+ * Don't return a timeout of zero, because that's USB3_LPM_DISABLED.
+ */
+ if (timeout_ns == USB3_LPM_DISABLED)
+ timeout_ns = 1;
+ else
+ timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 1000);
+
+ /* If the necessary timeout value is bigger than what we can set in the
+ * USB 3.0 hub, we have to disable hub-initiated U1.
+ */
+ if (timeout_ns <= USB3_LPM_U1_MAX_TIMEOUT)
+ return timeout_ns;
+ dev_dbg(&udev->dev, "Hub-initiated U1 disabled "
+ "due to long timeout %llu ms\n", timeout_ns);
+ return xhci_get_timeout_no_hub_lpm(udev, USB3_LPM_U1);
+}
+
+/* The U2 timeout should be the maximum of:
+ * - 10 ms (to avoid the bandwidth impact on the scheduler)
+ * - largest bInterval of any active periodic endpoint (to avoid going
+ * into lower power link states between intervals).
+ * - the U2 Exit Latency of the device
+ */
+static unsigned long long xhci_calculate_intel_u2_timeout(
+ struct usb_device *udev,
+ struct usb_endpoint_descriptor *desc)
+{
+ unsigned long long timeout_ns;
+ unsigned long long u2_del_ns;
+
+ timeout_ns = 10 * 1000 * 1000;
+
+ if ((usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) &&
+ (xhci_service_interval_to_ns(desc) > timeout_ns))
+ timeout_ns = xhci_service_interval_to_ns(desc);
+
+ u2_del_ns = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat) * 1000ULL;
+ if (u2_del_ns > timeout_ns)
+ timeout_ns = u2_del_ns;
+
+ return timeout_ns;
+}
+
+/* Returns the hub-encoded U2 timeout value. */
+static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci,
+ struct usb_device *udev,
+ struct usb_endpoint_descriptor *desc)
+{
+ unsigned long long timeout_ns;
+
+ /* Prevent U2 if service interval is shorter than U2 exit latency */
+ if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
+ if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) {
+ dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n");
+ return USB3_LPM_DISABLED;
+ }
+ }
+
+ if (xhci->quirks & XHCI_INTEL_HOST)
+ timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
+ else
+ timeout_ns = udev->u2_params.sel;
+
+ /* The U2 timeout is encoded in 256us intervals */
+ timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000);
+ /* If the necessary timeout value is bigger than what we can set in the
+ * USB 3.0 hub, we have to disable hub-initiated U2.
+ */
+ if (timeout_ns <= USB3_LPM_U2_MAX_TIMEOUT)
+ return timeout_ns;
+ dev_dbg(&udev->dev, "Hub-initiated U2 disabled "
+ "due to long timeout %llu ms\n", timeout_ns);
+ return xhci_get_timeout_no_hub_lpm(udev, USB3_LPM_U2);
+}
+
+static u16 xhci_call_host_update_timeout_for_endpoint(struct xhci_hcd *xhci,
+ struct usb_device *udev,
+ struct usb_endpoint_descriptor *desc,
+ enum usb3_link_state state,
+ u16 *timeout)
+{
+ if (state == USB3_LPM_U1)
+ return xhci_calculate_u1_timeout(xhci, udev, desc);
+ else if (state == USB3_LPM_U2)
+ return xhci_calculate_u2_timeout(xhci, udev, desc);
+
+ return USB3_LPM_DISABLED;
+}
+
+static int xhci_update_timeout_for_endpoint(struct xhci_hcd *xhci,
+ struct usb_device *udev,
+ struct usb_endpoint_descriptor *desc,
+ enum usb3_link_state state,
+ u16 *timeout)
+{
+ u16 alt_timeout;
+
+ alt_timeout = xhci_call_host_update_timeout_for_endpoint(xhci, udev,
+ desc, state, timeout);
+
+ /* If we found we can't enable hub-initiated LPM, and
+ * the U1 or U2 exit latency was too high to allow
+ * device-initiated LPM as well, then we will disable LPM
+ * for this device, so stop searching any further.
+ */
+ if (alt_timeout == USB3_LPM_DISABLED) {
+ *timeout = alt_timeout;
+ return -E2BIG;
+ }
+ if (alt_timeout > *timeout)
+ *timeout = alt_timeout;
+ return 0;
+}
+
+static int xhci_update_timeout_for_interface(struct xhci_hcd *xhci,
+ struct usb_device *udev,
+ struct usb_host_interface *alt,
+ enum usb3_link_state state,
+ u16 *timeout)
+{
+ int j;
+
+ for (j = 0; j < alt->desc.bNumEndpoints; j++) {
+ if (xhci_update_timeout_for_endpoint(xhci, udev,
+ &alt->endpoint[j].desc, state, timeout))
+ return -E2BIG;
+ }
+ return 0;
+}
+
+static int xhci_check_intel_tier_policy(struct usb_device *udev,
+ enum usb3_link_state state)
+{
+ struct usb_device *parent;
+ unsigned int num_hubs;
+
+ /* Don't enable U1 if the device is on a 2nd tier hub or lower. */
+ for (parent = udev->parent, num_hubs = 0; parent->parent;
+ parent = parent->parent)
+ num_hubs++;
+
+ if (num_hubs < 2)
+ return 0;
+
+ dev_dbg(&udev->dev, "Disabling U1/U2 link state for device"
+ " below second-tier hub.\n");
+ dev_dbg(&udev->dev, "Plug device into first-tier hub "
+ "to decrease power consumption.\n");
+ return -E2BIG;
+}
+
+static int xhci_check_tier_policy(struct xhci_hcd *xhci,
+ struct usb_device *udev,
+ enum usb3_link_state state)
+{
+ if (xhci->quirks & XHCI_INTEL_HOST)
+ return xhci_check_intel_tier_policy(udev, state);
+ else
+ return 0;
+}
+
+/* Returns the U1 or U2 timeout that should be enabled.
+ * If the tier check or timeout setting functions return with a non-zero exit
+ * code, that means the timeout value has been finalized and we shouldn't look
+ * at any more endpoints.
+ */
+static u16 xhci_calculate_lpm_timeout(struct usb_hcd *hcd,
+ struct usb_device *udev, enum usb3_link_state state)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct usb_host_config *config;
+ char *state_name;
+ int i;
+ u16 timeout = USB3_LPM_DISABLED;
+
+ if (state == USB3_LPM_U1)
+ state_name = "U1";
+ else if (state == USB3_LPM_U2)
+ state_name = "U2";
+ else {
+ dev_warn(&udev->dev, "Can't enable unknown link state %i\n",
+ state);
+ return timeout;
+ }
+
+ /* Gather some information about the currently installed configuration
+ * and alternate interface settings.
+ */
+ if (xhci_update_timeout_for_endpoint(xhci, udev, &udev->ep0.desc,
+ state, &timeout))
+ return timeout;
+
+ config = udev->actconfig;
+ if (!config)
+ return timeout;
+
+ for (i = 0; i < config->desc.bNumInterfaces; i++) {
+ struct usb_driver *driver;
+ struct usb_interface *intf = config->interface[i];
+
+ if (!intf)
+ continue;
+
+ /* Check if any currently bound drivers want hub-initiated LPM
+ * disabled.
+ */
+ if (intf->dev.driver) {
+ driver = to_usb_driver(intf->dev.driver);
+ if (driver && driver->disable_hub_initiated_lpm) {
+ dev_dbg(&udev->dev, "Hub-initiated %s disabled at request of driver %s\n",
+ state_name, driver->name);
+ timeout = xhci_get_timeout_no_hub_lpm(udev,
+ state);
+ if (timeout == USB3_LPM_DISABLED)
+ return timeout;
+ }
+ }
+
+ /* Not sure how this could happen... */
+ if (!intf->cur_altsetting)
+ continue;
+
+ if (xhci_update_timeout_for_interface(xhci, udev,
+ intf->cur_altsetting,
+ state, &timeout))
+ return timeout;
+ }
+ return timeout;
+}
+
+static int calculate_max_exit_latency(struct usb_device *udev,
+ enum usb3_link_state state_changed,
+ u16 hub_encoded_timeout)
+{
+ unsigned long long u1_mel_us = 0;
+ unsigned long long u2_mel_us = 0;
+ unsigned long long mel_us = 0;
+ bool disabling_u1;
+ bool disabling_u2;
+ bool enabling_u1;
+ bool enabling_u2;
+
+ disabling_u1 = (state_changed == USB3_LPM_U1 &&
+ hub_encoded_timeout == USB3_LPM_DISABLED);
+ disabling_u2 = (state_changed == USB3_LPM_U2 &&
+ hub_encoded_timeout == USB3_LPM_DISABLED);
+
+ enabling_u1 = (state_changed == USB3_LPM_U1 &&
+ hub_encoded_timeout != USB3_LPM_DISABLED);
+ enabling_u2 = (state_changed == USB3_LPM_U2 &&
+ hub_encoded_timeout != USB3_LPM_DISABLED);
+
+ /* If U1 was already enabled and we're not disabling it,
+ * or we're going to enable U1, account for the U1 max exit latency.
+ */
+ if ((udev->u1_params.timeout != USB3_LPM_DISABLED && !disabling_u1) ||
+ enabling_u1)
+ u1_mel_us = DIV_ROUND_UP(udev->u1_params.mel, 1000);
+ if ((udev->u2_params.timeout != USB3_LPM_DISABLED && !disabling_u2) ||
+ enabling_u2)
+ u2_mel_us = DIV_ROUND_UP(udev->u2_params.mel, 1000);
+
+ mel_us = max(u1_mel_us, u2_mel_us);
+
+ /* xHCI host controller max exit latency field is only 16 bits wide. */
+ if (mel_us > MAX_EXIT) {
+ dev_warn(&udev->dev, "Link PM max exit latency of %lluus "
+ "is too big.\n", mel_us);
+ return -E2BIG;
+ }
+ return mel_us;
+}
+
+/* Returns the USB3 hub-encoded value for the U1/U2 timeout. */
+static int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd,
+ struct usb_device *udev, enum usb3_link_state state)
+{
+ struct xhci_hcd *xhci;
+ struct xhci_port *port;
+ u16 hub_encoded_timeout;
+ int mel;
+ int ret;
+
+ xhci = hcd_to_xhci(hcd);
+ /* The LPM timeout values are pretty host-controller specific, so don't
+ * enable hub-initiated timeouts unless the vendor has provided
+ * information about their timeout algorithm.
+ */
+ if (!xhci || !(xhci->quirks & XHCI_LPM_SUPPORT) ||
+ !xhci->devs[udev->slot_id])
+ return USB3_LPM_DISABLED;
+
+ if (xhci_check_tier_policy(xhci, udev, state) < 0)
+ return USB3_LPM_DISABLED;
+
+ /* If connected to root port then check port can handle lpm */
+ if (udev->parent && !udev->parent->parent) {
+ port = xhci->usb3_rhub.ports[udev->portnum - 1];
+ if (port->lpm_incapable)
+ return USB3_LPM_DISABLED;
+ }
+
+ hub_encoded_timeout = xhci_calculate_lpm_timeout(hcd, udev, state);
+ mel = calculate_max_exit_latency(udev, state, hub_encoded_timeout);
+ if (mel < 0) {
+ /* Max Exit Latency is too big, disable LPM. */
+ hub_encoded_timeout = USB3_LPM_DISABLED;
+ mel = 0;
+ }
+
+ ret = xhci_change_max_exit_latency(xhci, udev, mel);
+ if (ret)
+ return ret;
+ return hub_encoded_timeout;
+}
+
+static int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
+ struct usb_device *udev, enum usb3_link_state state)
+{
+ struct xhci_hcd *xhci;
+ u16 mel;
+
+ xhci = hcd_to_xhci(hcd);
+ if (!xhci || !(xhci->quirks & XHCI_LPM_SUPPORT) ||
+ !xhci->devs[udev->slot_id])
+ return 0;
+
+ mel = calculate_max_exit_latency(udev, state, USB3_LPM_DISABLED);
+ return xhci_change_max_exit_latency(xhci, udev, mel);
+}
+#else /* CONFIG_PM */
+
+static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
+ struct usb_device *udev, int enable)
+{
+ return 0;
+}
+
+static int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ return 0;
+}
+
+static int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd,
+ struct usb_device *udev, enum usb3_link_state state)
+{
+ return USB3_LPM_DISABLED;
+}
+
+static int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
+ struct usb_device *udev, enum usb3_link_state state)
+{
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+/* Once a hub descriptor is fetched for a device, we need to update the xHC's
+ * internal data structures for the device.
+ */
+int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
+ struct usb_tt *tt, gfp_t mem_flags)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct xhci_virt_device *vdev;
+ struct xhci_command *config_cmd;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ unsigned long flags;
+ unsigned think_time;
+ int ret;
+
+ /* Ignore root hubs */
+ if (!hdev->parent)
+ return 0;
+
+ vdev = xhci->devs[hdev->slot_id];
+ if (!vdev) {
+ xhci_warn(xhci, "Cannot update hub desc for unknown device.\n");
+ return -EINVAL;
+ }
+
+ config_cmd = xhci_alloc_command_with_ctx(xhci, true, mem_flags);
+ if (!config_cmd)
+ return -ENOMEM;
+
+ ctrl_ctx = xhci_get_input_control_ctx(config_cmd->in_ctx);
+ if (!ctrl_ctx) {
+ xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+ __func__);
+ xhci_free_command(xhci, config_cmd);
+ return -ENOMEM;
+ }
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (hdev->speed == USB_SPEED_HIGH &&
+ xhci_alloc_tt_info(xhci, vdev, hdev, tt, GFP_ATOMIC)) {
+ xhci_dbg(xhci, "Could not allocate xHCI TT structure.\n");
+ xhci_free_command(xhci, config_cmd);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return -ENOMEM;
+ }
+
+ xhci_slot_copy(xhci, config_cmd->in_ctx, vdev->out_ctx);
+ ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+ slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx);
+ slot_ctx->dev_info |= cpu_to_le32(DEV_HUB);
+ /*
+ * refer to section 6.2.2: MTT should be 0 for full speed hub,
+ * but it may be already set to 1 when setup an xHCI virtual
+ * device, so clear it anyway.
+ */
+ if (tt->multi)
+ slot_ctx->dev_info |= cpu_to_le32(DEV_MTT);
+ else if (hdev->speed == USB_SPEED_FULL)
+ slot_ctx->dev_info &= cpu_to_le32(~DEV_MTT);
+
+ if (xhci->hci_version > 0x95) {
+ xhci_dbg(xhci, "xHCI version %x needs hub "
+ "TT think time and number of ports\n",
+ (unsigned int) xhci->hci_version);
+ slot_ctx->dev_info2 |= cpu_to_le32(XHCI_MAX_PORTS(hdev->maxchild));
+ /* Set TT think time - convert from ns to FS bit times.
+ * 0 = 8 FS bit times, 1 = 16 FS bit times,
+ * 2 = 24 FS bit times, 3 = 32 FS bit times.
+ *
+ * xHCI 1.0: this field shall be 0 if the device is not a
+ * High-spped hub.
+ */
+ think_time = tt->think_time;
+ if (think_time != 0)
+ think_time = (think_time / 666) - 1;
+ if (xhci->hci_version < 0x100 || hdev->speed == USB_SPEED_HIGH)
+ slot_ctx->tt_info |=
+ cpu_to_le32(TT_THINK_TIME(think_time));
+ } else {
+ xhci_dbg(xhci, "xHCI version %x doesn't need hub "
+ "TT think time or number of ports\n",
+ (unsigned int) xhci->hci_version);
+ }
+ slot_ctx->dev_state = 0;
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ xhci_dbg(xhci, "Set up %s for hub device.\n",
+ (xhci->hci_version > 0x95) ?
+ "configure endpoint" : "evaluate context");
+
+ /* Issue and wait for the configure endpoint or
+ * evaluate context command.
+ */
+ if (xhci->hci_version > 0x95)
+ ret = xhci_configure_endpoint(xhci, hdev, config_cmd,
+ false, false);
+ else
+ ret = xhci_configure_endpoint(xhci, hdev, config_cmd,
+ true, false);
+
+ xhci_free_command(xhci, config_cmd);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(xhci_update_hub_device);
+
+static int xhci_get_frame(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ /* EHCI mods by the periodic size. Why? */
+ return readl(&xhci->run_regs->microframe_index) >> 3;
+}
+
+static void xhci_hcd_init_usb2_data(struct xhci_hcd *xhci, struct usb_hcd *hcd)
+{
+ xhci->usb2_rhub.hcd = hcd;
+ hcd->speed = HCD_USB2;
+ hcd->self.root_hub->speed = USB_SPEED_HIGH;
+ /*
+ * USB 2.0 roothub under xHCI has an integrated TT,
+ * (rate matching hub) as opposed to having an OHCI/UHCI
+ * companion controller.
+ */
+ hcd->has_tt = 1;
+}
+
+static void xhci_hcd_init_usb3_data(struct xhci_hcd *xhci, struct usb_hcd *hcd)
+{
+ unsigned int minor_rev;
+
+ /*
+ * Early xHCI 1.1 spec did not mention USB 3.1 capable hosts
+ * should return 0x31 for sbrn, or that the minor revision
+ * is a two digit BCD containig minor and sub-minor numbers.
+ * This was later clarified in xHCI 1.2.
+ *
+ * Some USB 3.1 capable hosts therefore have sbrn 0x30, and
+ * minor revision set to 0x1 instead of 0x10.
+ */
+ if (xhci->usb3_rhub.min_rev == 0x1)
+ minor_rev = 1;
+ else
+ minor_rev = xhci->usb3_rhub.min_rev / 0x10;
+
+ switch (minor_rev) {
+ case 2:
+ hcd->speed = HCD_USB32;
+ hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
+ hcd->self.root_hub->rx_lanes = 2;
+ hcd->self.root_hub->tx_lanes = 2;
+ hcd->self.root_hub->ssp_rate = USB_SSP_GEN_2x2;
+ break;
+ case 1:
+ hcd->speed = HCD_USB31;
+ hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
+ hcd->self.root_hub->ssp_rate = USB_SSP_GEN_2x1;
+ break;
+ }
+ xhci_info(xhci, "Host supports USB 3.%x %sSuperSpeed\n",
+ minor_rev, minor_rev ? "Enhanced " : "");
+
+ xhci->usb3_rhub.hcd = hcd;
+}
+
+int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
+{
+ struct xhci_hcd *xhci;
+ /*
+ * TODO: Check with DWC3 clients for sysdev according to
+ * quirks
+ */
+ struct device *dev = hcd->self.sysdev;
+ int retval;
+
+ /* Accept arbitrarily long scatter-gather lists */
+ hcd->self.sg_tablesize = ~0;
+
+ /* support to build packet from discontinuous buffers */
+ hcd->self.no_sg_constraint = 1;
+
+ /* XHCI controllers don't stop the ep queue on short packets :| */
+ hcd->self.no_stop_on_short = 1;
+
+ xhci = hcd_to_xhci(hcd);
+
+ if (!usb_hcd_is_primary_hcd(hcd)) {
+ xhci_hcd_init_usb3_data(xhci, hcd);
+ return 0;
+ }
+
+ mutex_init(&xhci->mutex);
+ xhci->main_hcd = hcd;
+ xhci->cap_regs = hcd->regs;
+ xhci->op_regs = hcd->regs +
+ HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
+ xhci->run_regs = hcd->regs +
+ (readl(&xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
+ /* Cache read-only capability registers */
+ xhci->hcs_params1 = readl(&xhci->cap_regs->hcs_params1);
+ xhci->hcs_params2 = readl(&xhci->cap_regs->hcs_params2);
+ xhci->hcs_params3 = readl(&xhci->cap_regs->hcs_params3);
+ xhci->hci_version = HC_VERSION(readl(&xhci->cap_regs->hc_capbase));
+ xhci->hcc_params = readl(&xhci->cap_regs->hcc_params);
+ if (xhci->hci_version > 0x100)
+ xhci->hcc_params2 = readl(&xhci->cap_regs->hcc_params2);
+
+ xhci->quirks |= quirks;
+
+ get_quirks(dev, xhci);
+
+ /* In xhci controllers which follow xhci 1.0 spec gives a spurious
+ * success event after a short transfer. This quirk will ignore such
+ * spurious event.
+ */
+ if (xhci->hci_version > 0x96)
+ xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
+
+ /* Make sure the HC is halted. */
+ retval = xhci_halt(xhci);
+ if (retval)
+ return retval;
+
+ xhci_zero_64b_regs(xhci);
+
+ xhci_dbg(xhci, "Resetting HCD\n");
+ /* Reset the internal HC memory state and registers. */
+ retval = xhci_reset(xhci, XHCI_RESET_LONG_USEC);
+ if (retval)
+ return retval;
+ xhci_dbg(xhci, "Reset complete\n");
+
+ /*
+ * On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0)
+ * of HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit
+ * address memory pointers actually. So, this driver clears the AC64
+ * bit of xhci->hcc_params to call dma_set_coherent_mask(dev,
+ * DMA_BIT_MASK(32)) in this xhci_gen_setup().
+ */
+ if (xhci->quirks & XHCI_NO_64BIT_SUPPORT)
+ xhci->hcc_params &= ~BIT(0);
+
+ /* Set dma_mask and coherent_dma_mask to 64-bits,
+ * if xHC supports 64-bit addressing */
+ if (HCC_64BIT_ADDR(xhci->hcc_params) &&
+ !dma_set_mask(dev, DMA_BIT_MASK(64))) {
+ xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
+ dma_set_coherent_mask(dev, DMA_BIT_MASK(64));
+ } else {
+ /*
+ * This is to avoid error in cases where a 32-bit USB
+ * controller is used on a 64-bit capable system.
+ */
+ retval = dma_set_mask(dev, DMA_BIT_MASK(32));
+ if (retval)
+ return retval;
+ xhci_dbg(xhci, "Enabling 32-bit DMA addresses.\n");
+ dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
+ }
+
+ xhci_dbg(xhci, "Calling HCD init\n");
+ /* Initialize HCD and host controller data structures. */
+ retval = xhci_init(hcd);
+ if (retval)
+ return retval;
+ xhci_dbg(xhci, "Called HCD init\n");
+
+ if (xhci_hcd_is_usb3(hcd))
+ xhci_hcd_init_usb3_data(xhci, hcd);
+ else
+ xhci_hcd_init_usb2_data(xhci, hcd);
+
+ xhci_info(xhci, "hcc params 0x%08x hci version 0x%x quirks 0x%016llx\n",
+ xhci->hcc_params, xhci->hci_version, xhci->quirks);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(xhci_gen_setup);
+
+static void xhci_clear_tt_buffer_complete(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_hcd *xhci;
+ struct usb_device *udev;
+ unsigned int slot_id;
+ unsigned int ep_index;
+ unsigned long flags;
+
+ xhci = hcd_to_xhci(hcd);
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ udev = (struct usb_device *)ep->hcpriv;
+ slot_id = udev->slot_id;
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+
+ xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_CLEARING_TT;
+ xhci_ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
+static const struct hc_driver xhci_hc_driver = {
+ .description = "xhci-hcd",
+ .product_desc = "xHCI Host Controller",
+ .hcd_priv_size = sizeof(struct xhci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = xhci_irq,
+ .flags = HCD_MEMORY | HCD_DMA | HCD_USB3 | HCD_SHARED |
+ HCD_BH,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = NULL, /* set in xhci_init_driver() */
+ .start = xhci_run,
+ .stop = xhci_stop,
+ .shutdown = xhci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .map_urb_for_dma = xhci_map_urb_for_dma,
+ .unmap_urb_for_dma = xhci_unmap_urb_for_dma,
+ .urb_enqueue = xhci_urb_enqueue,
+ .urb_dequeue = xhci_urb_dequeue,
+ .alloc_dev = xhci_alloc_dev,
+ .free_dev = xhci_free_dev,
+ .alloc_streams = xhci_alloc_streams,
+ .free_streams = xhci_free_streams,
+ .add_endpoint = xhci_add_endpoint,
+ .drop_endpoint = xhci_drop_endpoint,
+ .endpoint_disable = xhci_endpoint_disable,
+ .endpoint_reset = xhci_endpoint_reset,
+ .check_bandwidth = xhci_check_bandwidth,
+ .reset_bandwidth = xhci_reset_bandwidth,
+ .address_device = xhci_address_device,
+ .enable_device = xhci_enable_device,
+ .update_hub_device = xhci_update_hub_device,
+ .reset_device = xhci_discover_or_reset_device,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = xhci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_control = xhci_hub_control,
+ .hub_status_data = xhci_hub_status_data,
+ .bus_suspend = xhci_bus_suspend,
+ .bus_resume = xhci_bus_resume,
+ .get_resuming_ports = xhci_get_resuming_ports,
+
+ /*
+ * call back when device connected and addressed
+ */
+ .update_device = xhci_update_device,
+ .set_usb2_hw_lpm = xhci_set_usb2_hardware_lpm,
+ .enable_usb3_lpm_timeout = xhci_enable_usb3_lpm_timeout,
+ .disable_usb3_lpm_timeout = xhci_disable_usb3_lpm_timeout,
+ .find_raw_port_number = xhci_find_raw_port_number,
+ .clear_tt_buffer_complete = xhci_clear_tt_buffer_complete,
+};
+
+void xhci_init_driver(struct hc_driver *drv,
+ const struct xhci_driver_overrides *over)
+{
+ BUG_ON(!over);
+
+ /* Copy the generic table to drv then apply the overrides */
+ *drv = xhci_hc_driver;
+
+ if (over) {
+ drv->hcd_priv_size += over->extra_priv_size;
+ if (over->reset)
+ drv->reset = over->reset;
+ if (over->start)
+ drv->start = over->start;
+ if (over->add_endpoint)
+ drv->add_endpoint = over->add_endpoint;
+ if (over->drop_endpoint)
+ drv->drop_endpoint = over->drop_endpoint;
+ if (over->check_bandwidth)
+ drv->check_bandwidth = over->check_bandwidth;
+ if (over->reset_bandwidth)
+ drv->reset_bandwidth = over->reset_bandwidth;
+ if (over->update_hub_device)
+ drv->update_hub_device = over->update_hub_device;
+ }
+}
+EXPORT_SYMBOL_GPL(xhci_init_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+
+static int __init xhci_hcd_init(void)
+{
+ /*
+ * Check the compiler generated sizes of structures that must be laid
+ * out in specific ways for hardware access.
+ */
+ BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_slot_ctx) != 8*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_ep_ctx) != 8*32/8);
+ /* xhci_device_control has eight fields, and also
+ * embeds one xhci_slot_ctx and 31 xhci_ep_ctx
+ */
+ BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8);
+ BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_cap_regs) != 8*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
+ /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
+ BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ xhci_debugfs_create_root();
+ xhci_dbc_init();
+
+ return 0;
+}
+
+/*
+ * If an init function is provided, an exit function must also be provided
+ * to allow module unload.
+ */
+static void __exit xhci_hcd_fini(void)
+{
+ xhci_debugfs_remove_root();
+ xhci_dbc_exit();
+}
+
+module_init(xhci_hcd_init);
+module_exit(xhci_hcd_fini);