summaryrefslogtreecommitdiffstats
path: root/drivers/usb/misc/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/usb/misc/Kconfig313
1 files changed, 313 insertions, 0 deletions
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
new file mode 100644
index 000000000..9367c12c7
--- /dev/null
+++ b/drivers/usb/misc/Kconfig
@@ -0,0 +1,313 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Miscellaneous driver configuration
+#
+comment "USB Miscellaneous drivers"
+
+config USB_EMI62
+ tristate "EMI 6|2m USB Audio interface support"
+ help
+ This driver loads firmware to Emagic EMI 6|2m low latency USB
+ Audio and Midi interface.
+
+ After firmware load the device is handled with standard linux
+ USB Audio driver.
+
+ This code is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called audio. If you want to compile it as a
+ module, say M here and read <file:Documentation/kbuild/modules.rst>.
+
+config USB_EMI26
+ tristate "EMI 2|6 USB Audio interface support"
+ help
+ This driver loads firmware to Emagic EMI 2|6 low latency USB
+ Audio interface.
+
+ After firmware load the device is handled with standard linux
+ USB Audio driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called emi26.
+
+config USB_ADUTUX
+ tristate "ADU devices from Ontrak Control Systems"
+ help
+ Say Y if you want to use an ADU device from Ontrak Control
+ Systems.
+
+ To compile this driver as a module, choose M here. The module
+ will be called adutux.
+
+config USB_SEVSEG
+ tristate "USB 7-Segment LED Display"
+ help
+ Say Y here if you have a USB 7-Segment Display by Delcom
+
+ To compile this driver as a module, choose M here: the
+ module will be called usbsevseg.
+
+config USB_LEGOTOWER
+ tristate "USB Lego Infrared Tower support"
+ help
+ Say Y here if you want to connect a USB Lego Infrared Tower to your
+ computer's USB port.
+
+ This code is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called legousbtower. If you want to compile it as
+ a module, say M here and read
+ <file:Documentation/kbuild/modules.rst>.
+
+config USB_LCD
+ tristate "USB LCD driver support"
+ help
+ Say Y here if you want to connect an USBLCD to your computer's
+ USB port. The USBLCD is a small USB interface board for
+ alphanumeric LCD modules. See <http://www.usblcd.de/> for more
+ information.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usblcd.
+
+config USB_CYPRESS_CY7C63
+ tristate "Cypress CY7C63xxx USB driver support"
+ help
+ Say Y here if you want to connect a Cypress CY7C63xxx
+ micro controller to your computer's USB port. Currently this
+ driver supports the pre-programmed devices (incl. firmware)
+ by AK Modul-Bus Computer GmbH.
+
+ Please see: https://www.ak-modul-bus.de/stat/mikrocontroller.html
+
+ To compile this driver as a module, choose M here: the
+ module will be called cypress_cy7c63.
+
+config USB_CYTHERM
+ tristate "Cypress USB thermometer driver support"
+ help
+ Say Y here if you want to connect a Cypress USB thermometer
+ device to your computer's USB port. This device is also known
+ as the Cypress USB Starter kit or demo board. The Elektor
+ magazine published a modified version of this device in issue
+ #291.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cytherm.
+
+config USB_IDMOUSE
+ tristate "Siemens ID USB Mouse Fingerprint sensor support"
+ help
+ Say Y here if you want to use the fingerprint sensor on
+ the Siemens ID Mouse. There is also a Siemens ID Mouse
+ _Professional_, which has not been tested with this driver,
+ but uses the same sensor and may therefore work.
+
+ This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX",
+ which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm".
+
+ See also <https://www.fs.tum.de/~echtler/idmouse/>.
+
+config USB_FTDI_ELAN
+ tristate "Elan PCMCIA CardBus Adapter USB Client"
+ help
+ ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.
+ Currently only the U132 adapter is available.
+
+ The U132 is specifically designed for CardBus PC cards that contain
+ an OHCI host controller. Typical PC cards are the Orange Mobile 3G
+ Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work
+ with PC cards that do not contain an OHCI controller. To use a U132
+ adapter you will need this "ftdi-elan" module as well as the "u132-hcd"
+ module which is a USB host controller driver that talks to the OHCI
+ controller within CardBus card that are inserted in the U132 adapter.
+
+ This driver has been tested with a CardBus OHCI USB adapter, and
+ worked with a USB PEN Drive inserted into the first USB port of
+ the PCCARD. A rather pointless thing to do, but useful for testing.
+
+ See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller"
+
+ It is safe to say M here.
+
+config USB_APPLEDISPLAY
+ tristate "Apple Cinema Display support"
+ select BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to control the backlight of Apple Cinema
+ Displays over USB. This driver provides a sysfs interface.
+
+config USB_QCOM_EUD
+ tristate "QCOM Embedded USB Debugger(EUD) Driver"
+ depends on ARCH_QCOM || COMPILE_TEST
+ select USB_ROLE_SWITCH
+ help
+ This module enables support for Qualcomm Technologies, Inc.
+ Embedded USB Debugger (EUD). The EUD is a control peripheral
+ which reports VBUS attach/detach events and has USB-based
+ debug and trace capabilities. On selecting m, the module name
+ that is built is qcom_eud.ko
+
+config APPLE_MFI_FASTCHARGE
+ tristate "Fast charge control for iOS devices"
+ select POWER_SUPPLY
+ help
+ Say Y here if you want to control whether iOS devices will
+ fast charge from the USB interface, as implemented in "MFi"
+ chargers.
+
+ It is safe to say M here.
+
+source "drivers/usb/misc/sisusbvga/Kconfig"
+
+config USB_LD
+ tristate "USB LD driver"
+ help
+ This driver is for generic USB devices that use interrupt transfers,
+ like LD Didactic's USB devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ldusb.
+
+config USB_TRANCEVIBRATOR
+ tristate "PlayStation 2 Trance Vibrator driver support"
+ help
+ Say Y here if you want to connect a PlayStation 2 Trance Vibrator
+ device to your computer's USB port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called trancevibrator.
+
+config USB_IOWARRIOR
+ tristate "IO Warrior driver support"
+ help
+ Say Y here if you want to support the IO Warrior devices from Code
+ Mercenaries. This includes support for the following devices:
+ IO Warrior 40
+ IO Warrior 24
+ IO Warrior 56
+ IO Warrior 24 Power Vampire
+
+ To compile this driver as a module, choose M here: the
+ module will be called iowarrior.
+
+config USB_TEST
+ tristate "USB testing driver"
+ help
+ This driver is for testing host controller software. It is used
+ with specialized device firmware for regression and stress testing,
+ to help prevent problems from cropping up with "real" drivers.
+
+ See <http://www.linux-usb.org/usbtest/> for more information,
+ including sample test device firmware and "how to use it".
+
+config USB_EHSET_TEST_FIXTURE
+ tristate "USB EHSET Test Fixture driver"
+ help
+ Say Y here if you want to support the special test fixture device
+ used for the USB-IF Embedded Host High-Speed Electrical Test procedure.
+
+ When the test fixture is connected, it can enumerate as one of several
+ VID/PID pairs. This driver then initiates a corresponding test mode on
+ the downstream port to which the test fixture is attached.
+
+ See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more
+ information.
+
+config USB_ISIGHTFW
+ tristate "iSight firmware loading support"
+ select FW_LOADER
+ help
+ This driver loads firmware for USB Apple iSight cameras, allowing
+ them to be driven by the USB video class driver available at
+ http://linux-uvc.berlios.de
+
+ The firmware for this driver must be extracted from the MacOS
+ driver beforehand. Tools for doing so are available at
+ http://bersace03.free.fr
+
+config USB_YUREX
+ tristate "USB YUREX driver support"
+ help
+ Say Y here if you want to connect a YUREX to your computer's
+ USB port. The YUREX is a leg-shakes sensor. See
+ <http://bbu.kayac.com/en/> for further information.
+ This driver supports read/write of leg-shakes counter and
+ fasync for the counter update via a device file /dev/yurex*.
+
+ To compile this driver as a module, choose M here: the
+ module will be called yurex.
+
+config USB_EZUSB_FX2
+ tristate "Functions for loading firmware on EZUSB chips"
+ help
+ Say Y here if you need EZUSB device support.
+ (Cypress FX/FX2/FX2LP microcontrollers)
+
+config USB_HUB_USB251XB
+ tristate "USB251XB Hub Controller Configuration Driver"
+ depends on I2C
+ help
+ This option enables support for configuration via SMBus of the
+ Microchip USB251x/xBi USB 2.0 Hub Controller series. Configuration
+ parameters may be set in devicetree or platform data.
+ Say Y or M here if you need to configure such a device via SMBus.
+
+config USB_HSIC_USB3503
+ tristate "USB3503 HSIC to USB20 Driver"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
+
+config USB_HSIC_USB4604
+ tristate "USB4604 HSIC to USB20 Driver"
+ depends on I2C
+ help
+ This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver.
+
+config USB_LINK_LAYER_TEST
+ tristate "USB Link Layer Test driver"
+ help
+ This driver is for generating specific traffic for Super Speed Link
+ Layer Test Device. Say Y only when you want to conduct USB Super Speed
+ Link Layer Test for host controllers.
+
+config USB_CHAOSKEY
+ tristate "ChaosKey random number generator driver support"
+ depends on HW_RANDOM
+ help
+ Say Y here if you want to connect an AltusMetrum ChaosKey or
+ Araneus Alea I to your computer's USB port. These devices
+ are hardware random number generators which hook into the
+ kernel entropy pool to ensure a large supply of entropy for
+ /dev/random and /dev/urandom and also provides direct access
+ via /dev/chaoskeyX
+
+ To compile this driver as a module, choose M here: the
+ module will be called chaoskey.
+
+config BRCM_USB_PINMAP
+ tristate "Broadcom pinmap driver support"
+ depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST
+ default ARCH_BRCMSTB && PHY_BRCM_USB
+ help
+ This option enables support for remapping some USB external
+ signals, which are typically on dedicated pins on the chip,
+ to any gpio.
+
+config USB_ONBOARD_HUB
+ tristate "Onboard USB hub support"
+ depends on OF || COMPILE_TEST
+ help
+ Say Y here if you want to support discrete onboard USB hubs that
+ don't require an additional control bus for initialization, but
+ need some non-trivial form of initialization, such as enabling a
+ power regulator. An example for such a hub is the Realtek
+ RTS5411.
+
+ This driver can be used as a module but its state (module vs
+ builtin) must match the state of the USB subsystem. Enabling
+ this config will enable the driver and it will automatically
+ match the state of the USB subsystem. If this driver is a
+ module it will be called onboard_usb_hub.