diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/usb/misc/ehset.c | 190 |
1 files changed, 190 insertions, 0 deletions
diff --git a/drivers/usb/misc/ehset.c b/drivers/usb/misc/ehset.c new file mode 100644 index 000000000..36b6e9fa7 --- /dev/null +++ b/drivers/usb/misc/ehset.c @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2010-2013, The Linux Foundation. All rights reserved. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/usb/ch11.h> + +#define TEST_SE0_NAK_PID 0x0101 +#define TEST_J_PID 0x0102 +#define TEST_K_PID 0x0103 +#define TEST_PACKET_PID 0x0104 +#define TEST_HS_HOST_PORT_SUSPEND_RESUME 0x0106 +#define TEST_SINGLE_STEP_GET_DEV_DESC 0x0107 +#define TEST_SINGLE_STEP_SET_FEATURE 0x0108 + +extern const struct usb_device_id *usb_device_match_id(struct usb_device *udev, + const struct usb_device_id *id); + +/* + * A list of USB hubs which requires to disable the power + * to the port before starting the testing procedures. + */ +static const struct usb_device_id ehset_hub_list[] = { + { USB_DEVICE(0x0424, 0x4502) }, + { USB_DEVICE(0x0424, 0x4913) }, + { USB_DEVICE(0x0451, 0x8027) }, + { } +}; + +static int ehset_prepare_port_for_testing(struct usb_device *hub_udev, u16 portnum) +{ + int ret = 0; + + /* + * The USB2.0 spec chapter 11.24.2.13 says that the USB port which is + * going under test needs to be put in suspend before sending the + * test command. Most hubs don't enforce this precondition, but there + * are some hubs which needs to disable the power to the port before + * starting the test. + */ + if (usb_device_match_id(hub_udev, ehset_hub_list)) { + ret = usb_control_msg_send(hub_udev, 0, USB_REQ_CLEAR_FEATURE, + USB_RT_PORT, USB_PORT_FEAT_ENABLE, + portnum, NULL, 0, 1000, GFP_KERNEL); + /* + * Wait for the port to be disabled. It's an arbitrary value + * which worked every time. + */ + msleep(100); + } else { + /* + * For the hubs which are compliant with the spec, + * put the port in SUSPEND. + */ + ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE, + USB_RT_PORT, USB_PORT_FEAT_SUSPEND, + portnum, NULL, 0, 1000, GFP_KERNEL); + } + return ret; +} + +static int ehset_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int ret = -EINVAL; + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_device *hub_udev = dev->parent; + struct usb_device_descriptor buf; + u8 portnum = dev->portnum; + u16 test_pid = le16_to_cpu(dev->descriptor.idProduct); + + switch (test_pid) { + case TEST_SE0_NAK_PID: + ret = ehset_prepare_port_for_testing(hub_udev, portnum); + if (ret < 0) + break; + ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE, + USB_RT_PORT, USB_PORT_FEAT_TEST, + (USB_TEST_SE0_NAK << 8) | portnum, + NULL, 0, 1000, GFP_KERNEL); + break; + case TEST_J_PID: + ret = ehset_prepare_port_for_testing(hub_udev, portnum); + if (ret < 0) + break; + ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE, + USB_RT_PORT, USB_PORT_FEAT_TEST, + (USB_TEST_J << 8) | portnum, NULL, 0, + 1000, GFP_KERNEL); + break; + case TEST_K_PID: + ret = ehset_prepare_port_for_testing(hub_udev, portnum); + if (ret < 0) + break; + ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE, + USB_RT_PORT, USB_PORT_FEAT_TEST, + (USB_TEST_K << 8) | portnum, NULL, 0, + 1000, GFP_KERNEL); + break; + case TEST_PACKET_PID: + ret = ehset_prepare_port_for_testing(hub_udev, portnum); + if (ret < 0) + break; + ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE, + USB_RT_PORT, USB_PORT_FEAT_TEST, + (USB_TEST_PACKET << 8) | portnum, + NULL, 0, 1000, GFP_KERNEL); + break; + case TEST_HS_HOST_PORT_SUSPEND_RESUME: + /* Test: wait for 15secs -> suspend -> 15secs delay -> resume */ + msleep(15 * 1000); + ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE, + USB_RT_PORT, USB_PORT_FEAT_SUSPEND, + portnum, NULL, 0, 1000, GFP_KERNEL); + if (ret < 0) + break; + + msleep(15 * 1000); + ret = usb_control_msg_send(hub_udev, 0, USB_REQ_CLEAR_FEATURE, + USB_RT_PORT, USB_PORT_FEAT_SUSPEND, + portnum, NULL, 0, 1000, GFP_KERNEL); + break; + case TEST_SINGLE_STEP_GET_DEV_DESC: + /* Test: wait for 15secs -> GetDescriptor request */ + msleep(15 * 1000); + + ret = usb_control_msg_recv(dev, 0, USB_REQ_GET_DESCRIPTOR, + USB_DIR_IN, USB_DT_DEVICE << 8, 0, + &buf, USB_DT_DEVICE_SIZE, + USB_CTRL_GET_TIMEOUT, GFP_KERNEL); + break; + case TEST_SINGLE_STEP_SET_FEATURE: + /* + * GetDescriptor SETUP request -> 15secs delay -> IN & STATUS + * + * Note, this test is only supported on root hubs since the + * SetPortFeature handling can only be done inside the HCD's + * hub_control callback function. + */ + if (hub_udev != dev->bus->root_hub) { + dev_err(&intf->dev, "SINGLE_STEP_SET_FEATURE test only supported on root hub\n"); + break; + } + + ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE, + USB_RT_PORT, USB_PORT_FEAT_TEST, + (6 << 8) | portnum, NULL, 0, + 60 * 1000, GFP_KERNEL); + + break; + default: + dev_err(&intf->dev, "%s: unsupported PID: 0x%x\n", + __func__, test_pid); + } + + return ret; +} + +static void ehset_disconnect(struct usb_interface *intf) +{ +} + +static const struct usb_device_id ehset_id_table[] = { + { USB_DEVICE(0x1a0a, TEST_SE0_NAK_PID) }, + { USB_DEVICE(0x1a0a, TEST_J_PID) }, + { USB_DEVICE(0x1a0a, TEST_K_PID) }, + { USB_DEVICE(0x1a0a, TEST_PACKET_PID) }, + { USB_DEVICE(0x1a0a, TEST_HS_HOST_PORT_SUSPEND_RESUME) }, + { USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_GET_DEV_DESC) }, + { USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_SET_FEATURE) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, ehset_id_table); + +static struct usb_driver ehset_driver = { + .name = "usb_ehset_test", + .probe = ehset_probe, + .disconnect = ehset_disconnect, + .id_table = ehset_id_table, +}; + +module_usb_driver(ehset_driver); + +MODULE_DESCRIPTION("USB Driver for EHSET Test Fixture"); +MODULE_LICENSE("GPL v2"); |