diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/usb/phy/phy-mv-usb.h | 160 |
1 files changed, 160 insertions, 0 deletions
diff --git a/drivers/usb/phy/phy-mv-usb.h b/drivers/usb/phy/phy-mv-usb.h new file mode 100644 index 000000000..5d5c0abb0 --- /dev/null +++ b/drivers/usb/phy/phy-mv-usb.h @@ -0,0 +1,160 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + */ + +#ifndef __MV_USB_OTG_CONTROLLER__ +#define __MV_USB_OTG_CONTROLLER__ + +#include <linux/types.h> + +/* Command Register Bit Masks */ +#define USBCMD_RUN_STOP (0x00000001) +#define USBCMD_CTRL_RESET (0x00000002) + +/* otgsc Register Bit Masks */ +#define OTGSC_CTRL_VUSB_DISCHARGE 0x00000001 +#define OTGSC_CTRL_VUSB_CHARGE 0x00000002 +#define OTGSC_CTRL_OTG_TERM 0x00000008 +#define OTGSC_CTRL_DATA_PULSING 0x00000010 +#define OTGSC_STS_USB_ID 0x00000100 +#define OTGSC_STS_A_VBUS_VALID 0x00000200 +#define OTGSC_STS_A_SESSION_VALID 0x00000400 +#define OTGSC_STS_B_SESSION_VALID 0x00000800 +#define OTGSC_STS_B_SESSION_END 0x00001000 +#define OTGSC_STS_1MS_TOGGLE 0x00002000 +#define OTGSC_STS_DATA_PULSING 0x00004000 +#define OTGSC_INTSTS_USB_ID 0x00010000 +#define OTGSC_INTSTS_A_VBUS_VALID 0x00020000 +#define OTGSC_INTSTS_A_SESSION_VALID 0x00040000 +#define OTGSC_INTSTS_B_SESSION_VALID 0x00080000 +#define OTGSC_INTSTS_B_SESSION_END 0x00100000 +#define OTGSC_INTSTS_1MS 0x00200000 +#define OTGSC_INTSTS_DATA_PULSING 0x00400000 +#define OTGSC_INTR_USB_ID 0x01000000 +#define OTGSC_INTR_A_VBUS_VALID 0x02000000 +#define OTGSC_INTR_A_SESSION_VALID 0x04000000 +#define OTGSC_INTR_B_SESSION_VALID 0x08000000 +#define OTGSC_INTR_B_SESSION_END 0x10000000 +#define OTGSC_INTR_1MS_TIMER 0x20000000 +#define OTGSC_INTR_DATA_PULSING 0x40000000 + +#define CAPLENGTH_MASK (0xff) + +/* Timer's interval, unit 10ms */ +#define T_A_WAIT_VRISE 100 +#define T_A_WAIT_BCON 2000 +#define T_A_AIDL_BDIS 100 +#define T_A_BIDL_ADIS 20 +#define T_B_ASE0_BRST 400 +#define T_B_SE0_SRP 300 +#define T_B_SRP_FAIL 2000 +#define T_B_DATA_PLS 10 +#define T_B_SRP_INIT 100 +#define T_A_SRP_RSPNS 10 +#define T_A_DRV_RSM 5 + +enum otg_function { + OTG_B_DEVICE = 0, + OTG_A_DEVICE +}; + +enum mv_otg_timer { + A_WAIT_BCON_TIMER = 0, + OTG_TIMER_NUM +}; + +/* PXA OTG state machine */ +struct mv_otg_ctrl { + /* internal variables */ + u8 a_set_b_hnp_en; /* A-Device set b_hnp_en */ + u8 b_srp_done; + u8 b_hnp_en; + + /* OTG inputs */ + u8 a_bus_drop; + u8 a_bus_req; + u8 a_clr_err; + u8 a_bus_resume; + u8 a_bus_suspend; + u8 a_conn; + u8 a_sess_vld; + u8 a_srp_det; + u8 a_vbus_vld; + u8 b_bus_req; /* B-Device Require Bus */ + u8 b_bus_resume; + u8 b_bus_suspend; + u8 b_conn; + u8 b_se0_srp; + u8 b_sess_end; + u8 b_sess_vld; + u8 id; + u8 a_suspend_req; + + /*Timer event */ + u8 a_aidl_bdis_timeout; + u8 b_ase0_brst_timeout; + u8 a_bidl_adis_timeout; + u8 a_wait_bcon_timeout; + + struct timer_list timer[OTG_TIMER_NUM]; +}; + +#define VUSBHS_MAX_PORTS 8 + +struct mv_otg_regs { + u32 usbcmd; /* Command register */ + u32 usbsts; /* Status register */ + u32 usbintr; /* Interrupt enable */ + u32 frindex; /* Frame index */ + u32 reserved1[1]; + u32 deviceaddr; /* Device Address */ + u32 eplistaddr; /* Endpoint List Address */ + u32 ttctrl; /* HOST TT status and control */ + u32 burstsize; /* Programmable Burst Size */ + u32 txfilltuning; /* Host Transmit Pre-Buffer Packet Tuning */ + u32 reserved[4]; + u32 epnak; /* Endpoint NAK */ + u32 epnaken; /* Endpoint NAK Enable */ + u32 configflag; /* Configured Flag register */ + u32 portsc[VUSBHS_MAX_PORTS]; /* Port Status/Control x, x = 1..8 */ + u32 otgsc; + u32 usbmode; /* USB Host/Device mode */ + u32 epsetupstat; /* Endpoint Setup Status */ + u32 epprime; /* Endpoint Initialize */ + u32 epflush; /* Endpoint De-initialize */ + u32 epstatus; /* Endpoint Status */ + u32 epcomplete; /* Endpoint Interrupt On Complete */ + u32 epctrlx[16]; /* Endpoint Control, where x = 0.. 15 */ + u32 mcr; /* Mux Control */ + u32 isr; /* Interrupt Status */ + u32 ier; /* Interrupt Enable */ +}; + +struct mv_otg { + struct usb_phy phy; + struct mv_otg_ctrl otg_ctrl; + + /* base address */ + void __iomem *phy_regs; + void __iomem *cap_regs; + struct mv_otg_regs __iomem *op_regs; + + struct platform_device *pdev; + int irq; + u32 irq_status; + u32 irq_en; + + struct delayed_work work; + struct workqueue_struct *qwork; + + spinlock_t wq_lock; + + struct mv_usb_platform_data *pdata; + + unsigned int active; + unsigned int clock_gating; + struct clk *clk; +}; + +#endif |