summaryrefslogtreecommitdiffstats
path: root/drivers/usb/phy/phy-tegra-usb.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/usb/phy/phy-tegra-usb.c1509
1 files changed, 1509 insertions, 0 deletions
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
new file mode 100644
index 000000000..f0240107e
--- /dev/null
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -0,0 +1,1509 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2013 NVIDIA Corporation
+ *
+ * Author:
+ * Erik Gilling <konkers@google.com>
+ * Benoit Goby <benoit@android.com>
+ * Venu Byravarasu <vbyravarasu@nvidia.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <linux/regulator/consumer.h>
+
+#include <linux/usb/ehci_def.h>
+#include <linux/usb/of.h>
+#include <linux/usb/tegra_usb_phy.h>
+#include <linux/usb/ulpi.h>
+
+#define ULPI_VIEWPORT 0x170
+
+/* PORTSC PTS/PHCD bits, Tegra20 only */
+#define TEGRA_USB_PORTSC1 0x184
+#define TEGRA_USB_PORTSC1_PTS(x) (((x) & 0x3) << 30)
+#define TEGRA_USB_PORTSC1_PHCD BIT(23)
+
+/* HOSTPC1 PTS/PHCD bits, Tegra30 and above */
+#define TEGRA_USB_HOSTPC1_DEVLC 0x1b4
+#define TEGRA_USB_HOSTPC1_DEVLC_PTS(x) (((x) & 0x7) << 29)
+#define TEGRA_USB_HOSTPC1_DEVLC_PHCD BIT(22)
+
+/* Bits of PORTSC1, which will get cleared by writing 1 into them */
+#define TEGRA_PORTSC1_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
+
+#define USB_SUSP_CTRL 0x400
+#define USB_WAKE_ON_RESUME_EN BIT(2)
+#define USB_WAKE_ON_CNNT_EN_DEV BIT(3)
+#define USB_WAKE_ON_DISCON_EN_DEV BIT(4)
+#define USB_SUSP_CLR BIT(5)
+#define USB_PHY_CLK_VALID BIT(7)
+#define UTMIP_RESET BIT(11)
+#define UHSIC_RESET BIT(11)
+#define UTMIP_PHY_ENABLE BIT(12)
+#define ULPI_PHY_ENABLE BIT(13)
+#define USB_SUSP_SET BIT(14)
+#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16)
+
+#define USB_PHY_VBUS_SENSORS 0x404
+#define B_SESS_VLD_WAKEUP_EN BIT(14)
+#define A_SESS_VLD_WAKEUP_EN BIT(22)
+#define A_VBUS_VLD_WAKEUP_EN BIT(30)
+
+#define USB_PHY_VBUS_WAKEUP_ID 0x408
+#define ID_INT_EN BIT(0)
+#define ID_CHG_DET BIT(1)
+#define VBUS_WAKEUP_INT_EN BIT(8)
+#define VBUS_WAKEUP_CHG_DET BIT(9)
+#define VBUS_WAKEUP_STS BIT(10)
+#define VBUS_WAKEUP_WAKEUP_EN BIT(30)
+
+#define USB1_LEGACY_CTRL 0x410
+#define USB1_NO_LEGACY_MODE BIT(0)
+#define USB1_VBUS_SENSE_CTL_MASK (3 << 1)
+#define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1)
+#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \
+ (1 << 1)
+#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1)
+#define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1)
+
+#define ULPI_TIMING_CTRL_0 0x424
+#define ULPI_OUTPUT_PINMUX_BYP BIT(10)
+#define ULPI_CLKOUT_PINMUX_BYP BIT(11)
+
+#define ULPI_TIMING_CTRL_1 0x428
+#define ULPI_DATA_TRIMMER_LOAD BIT(0)
+#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
+#define ULPI_STPDIRNXT_TRIMMER_LOAD BIT(16)
+#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
+#define ULPI_DIR_TRIMMER_LOAD BIT(24)
+#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
+
+#define UTMIP_PLL_CFG1 0x804
+#define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
+#define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27)
+
+#define UTMIP_XCVR_CFG0 0x808
+#define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0)
+#define UTMIP_XCVR_SETUP_MSB(x) ((((x) & 0x70) >> 4) << 22)
+#define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8)
+#define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10)
+#define UTMIP_FORCE_PD_POWERDOWN BIT(14)
+#define UTMIP_FORCE_PD2_POWERDOWN BIT(16)
+#define UTMIP_FORCE_PDZI_POWERDOWN BIT(18)
+#define UTMIP_XCVR_LSBIAS_SEL BIT(21)
+#define UTMIP_XCVR_HSSLEW(x) (((x) & 0x3) << 4)
+#define UTMIP_XCVR_HSSLEW_MSB(x) ((((x) & 0x1fc) >> 2) << 25)
+
+#define UTMIP_BIAS_CFG0 0x80c
+#define UTMIP_OTGPD BIT(11)
+#define UTMIP_BIASPD BIT(10)
+#define UTMIP_HSSQUELCH_LEVEL(x) (((x) & 0x3) << 0)
+#define UTMIP_HSDISCON_LEVEL(x) (((x) & 0x3) << 2)
+#define UTMIP_HSDISCON_LEVEL_MSB(x) ((((x) & 0x4) >> 2) << 24)
+
+#define UTMIP_HSRX_CFG0 0x810
+#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10)
+#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15)
+
+#define UTMIP_HSRX_CFG1 0x814
+#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1)
+
+#define UTMIP_TX_CFG0 0x820
+#define UTMIP_FS_PREABMLE_J BIT(19)
+#define UTMIP_HS_DISCON_DISABLE BIT(8)
+
+#define UTMIP_MISC_CFG0 0x824
+#define UTMIP_DPDM_OBSERVE BIT(26)
+#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27)
+#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf)
+#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe)
+#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd)
+#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc)
+#define UTMIP_SUSPEND_EXIT_ON_EDGE BIT(22)
+
+#define UTMIP_MISC_CFG1 0x828
+#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18)
+#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6)
+
+#define UTMIP_DEBOUNCE_CFG0 0x82c
+#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0)
+
+#define UTMIP_BAT_CHRG_CFG0 0x830
+#define UTMIP_PD_CHRG BIT(0)
+
+#define UTMIP_SPARE_CFG0 0x834
+#define FUSE_SETUP_SEL BIT(3)
+
+#define UTMIP_XCVR_CFG1 0x838
+#define UTMIP_FORCE_PDDISC_POWERDOWN BIT(0)
+#define UTMIP_FORCE_PDCHRP_POWERDOWN BIT(2)
+#define UTMIP_FORCE_PDDR_POWERDOWN BIT(4)
+#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18)
+
+#define UTMIP_BIAS_CFG1 0x83c
+#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3)
+
+/* For Tegra30 and above only, the address is different in Tegra20 */
+#define USB_USBMODE 0x1f8
+#define USB_USBMODE_MASK (3 << 0)
+#define USB_USBMODE_HOST (3 << 0)
+#define USB_USBMODE_DEVICE (2 << 0)
+
+#define PMC_USB_AO 0xf0
+#define VBUS_WAKEUP_PD_P0 BIT(2)
+#define ID_PD_P0 BIT(3)
+
+static DEFINE_SPINLOCK(utmip_pad_lock);
+static unsigned int utmip_pad_count;
+
+struct tegra_xtal_freq {
+ unsigned int freq;
+ u8 enable_delay;
+ u8 stable_count;
+ u8 active_delay;
+ u8 xtal_freq_count;
+ u16 debounce;
+};
+
+static const struct tegra_xtal_freq tegra_freq_table[] = {
+ {
+ .freq = 12000000,
+ .enable_delay = 0x02,
+ .stable_count = 0x2F,
+ .active_delay = 0x04,
+ .xtal_freq_count = 0x76,
+ .debounce = 0x7530,
+ },
+ {
+ .freq = 13000000,
+ .enable_delay = 0x02,
+ .stable_count = 0x33,
+ .active_delay = 0x05,
+ .xtal_freq_count = 0x7F,
+ .debounce = 0x7EF4,
+ },
+ {
+ .freq = 19200000,
+ .enable_delay = 0x03,
+ .stable_count = 0x4B,
+ .active_delay = 0x06,
+ .xtal_freq_count = 0xBB,
+ .debounce = 0xBB80,
+ },
+ {
+ .freq = 26000000,
+ .enable_delay = 0x04,
+ .stable_count = 0x66,
+ .active_delay = 0x09,
+ .xtal_freq_count = 0xFE,
+ .debounce = 0xFDE8,
+ },
+};
+
+static inline struct tegra_usb_phy *to_tegra_usb_phy(struct usb_phy *u_phy)
+{
+ return container_of(u_phy, struct tegra_usb_phy, u_phy);
+}
+
+static void set_pts(struct tegra_usb_phy *phy, u8 pts_val)
+{
+ void __iomem *base = phy->regs;
+ u32 val;
+
+ if (phy->soc_config->has_hostpc) {
+ val = readl_relaxed(base + TEGRA_USB_HOSTPC1_DEVLC);
+ val &= ~TEGRA_USB_HOSTPC1_DEVLC_PTS(~0);
+ val |= TEGRA_USB_HOSTPC1_DEVLC_PTS(pts_val);
+ writel_relaxed(val, base + TEGRA_USB_HOSTPC1_DEVLC);
+ } else {
+ val = readl_relaxed(base + TEGRA_USB_PORTSC1);
+ val &= ~TEGRA_PORTSC1_RWC_BITS;
+ val &= ~TEGRA_USB_PORTSC1_PTS(~0);
+ val |= TEGRA_USB_PORTSC1_PTS(pts_val);
+ writel_relaxed(val, base + TEGRA_USB_PORTSC1);
+ }
+}
+
+static void set_phcd(struct tegra_usb_phy *phy, bool enable)
+{
+ void __iomem *base = phy->regs;
+ u32 val;
+
+ if (phy->soc_config->has_hostpc) {
+ val = readl_relaxed(base + TEGRA_USB_HOSTPC1_DEVLC);
+ if (enable)
+ val |= TEGRA_USB_HOSTPC1_DEVLC_PHCD;
+ else
+ val &= ~TEGRA_USB_HOSTPC1_DEVLC_PHCD;
+ writel_relaxed(val, base + TEGRA_USB_HOSTPC1_DEVLC);
+ } else {
+ val = readl_relaxed(base + TEGRA_USB_PORTSC1) & ~PORT_RWC_BITS;
+ if (enable)
+ val |= TEGRA_USB_PORTSC1_PHCD;
+ else
+ val &= ~TEGRA_USB_PORTSC1_PHCD;
+ writel_relaxed(val, base + TEGRA_USB_PORTSC1);
+ }
+}
+
+static int utmip_pad_open(struct tegra_usb_phy *phy)
+{
+ int ret;
+
+ ret = clk_prepare_enable(phy->pad_clk);
+ if (ret) {
+ dev_err(phy->u_phy.dev,
+ "Failed to enable UTMI-pads clock: %d\n", ret);
+ return ret;
+ }
+
+ spin_lock(&utmip_pad_lock);
+
+ ret = reset_control_deassert(phy->pad_rst);
+ if (ret) {
+ dev_err(phy->u_phy.dev,
+ "Failed to initialize UTMI-pads reset: %d\n", ret);
+ goto unlock;
+ }
+
+ ret = reset_control_assert(phy->pad_rst);
+ if (ret) {
+ dev_err(phy->u_phy.dev,
+ "Failed to assert UTMI-pads reset: %d\n", ret);
+ goto unlock;
+ }
+
+ udelay(1);
+
+ ret = reset_control_deassert(phy->pad_rst);
+ if (ret)
+ dev_err(phy->u_phy.dev,
+ "Failed to deassert UTMI-pads reset: %d\n", ret);
+unlock:
+ spin_unlock(&utmip_pad_lock);
+
+ clk_disable_unprepare(phy->pad_clk);
+
+ return ret;
+}
+
+static int utmip_pad_close(struct tegra_usb_phy *phy)
+{
+ int ret;
+
+ ret = clk_prepare_enable(phy->pad_clk);
+ if (ret) {
+ dev_err(phy->u_phy.dev,
+ "Failed to enable UTMI-pads clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = reset_control_assert(phy->pad_rst);
+ if (ret)
+ dev_err(phy->u_phy.dev,
+ "Failed to assert UTMI-pads reset: %d\n", ret);
+
+ udelay(1);
+
+ clk_disable_unprepare(phy->pad_clk);
+
+ return ret;
+}
+
+static int utmip_pad_power_on(struct tegra_usb_phy *phy)
+{
+ struct tegra_utmip_config *config = phy->config;
+ void __iomem *base = phy->pad_regs;
+ u32 val;
+ int err;
+
+ err = clk_prepare_enable(phy->pad_clk);
+ if (err)
+ return err;
+
+ spin_lock(&utmip_pad_lock);
+
+ if (utmip_pad_count++ == 0) {
+ val = readl_relaxed(base + UTMIP_BIAS_CFG0);
+ val &= ~(UTMIP_OTGPD | UTMIP_BIASPD);
+
+ if (phy->soc_config->requires_extra_tuning_parameters) {
+ val &= ~(UTMIP_HSSQUELCH_LEVEL(~0) |
+ UTMIP_HSDISCON_LEVEL(~0) |
+ UTMIP_HSDISCON_LEVEL_MSB(~0));
+
+ val |= UTMIP_HSSQUELCH_LEVEL(config->hssquelch_level);
+ val |= UTMIP_HSDISCON_LEVEL(config->hsdiscon_level);
+ val |= UTMIP_HSDISCON_LEVEL_MSB(config->hsdiscon_level);
+ }
+ writel_relaxed(val, base + UTMIP_BIAS_CFG0);
+ }
+
+ if (phy->pad_wakeup) {
+ phy->pad_wakeup = false;
+ utmip_pad_count--;
+ }
+
+ spin_unlock(&utmip_pad_lock);
+
+ clk_disable_unprepare(phy->pad_clk);
+
+ return 0;
+}
+
+static int utmip_pad_power_off(struct tegra_usb_phy *phy)
+{
+ void __iomem *base = phy->pad_regs;
+ u32 val;
+ int ret;
+
+ ret = clk_prepare_enable(phy->pad_clk);
+ if (ret)
+ return ret;
+
+ spin_lock(&utmip_pad_lock);
+
+ if (!utmip_pad_count) {
+ dev_err(phy->u_phy.dev, "UTMIP pad already powered off\n");
+ ret = -EINVAL;
+ goto ulock;
+ }
+
+ /*
+ * In accordance to TRM, OTG and Bias pad circuits could be turned off
+ * to save power if wake is enabled, but the VBUS-change detection
+ * method is board-specific and these circuits may need to be enabled
+ * to generate wakeup event, hence we will just keep them both enabled.
+ */
+ if (phy->wakeup_enabled) {
+ phy->pad_wakeup = true;
+ utmip_pad_count++;
+ }
+
+ if (--utmip_pad_count == 0) {
+ val = readl_relaxed(base + UTMIP_BIAS_CFG0);
+ val |= UTMIP_OTGPD | UTMIP_BIASPD;
+ writel_relaxed(val, base + UTMIP_BIAS_CFG0);
+ }
+ulock:
+ spin_unlock(&utmip_pad_lock);
+
+ clk_disable_unprepare(phy->pad_clk);
+
+ return ret;
+}
+
+static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result)
+{
+ u32 tmp;
+
+ return readl_relaxed_poll_timeout(reg, tmp, (tmp & mask) == result,
+ 2000, 6000);
+}
+
+static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
+{
+ void __iomem *base = phy->regs;
+ u32 val;
+
+ /*
+ * The USB driver may have already initiated the phy clock
+ * disable so wait to see if the clock turns off and if not
+ * then proceed with gating the clock.
+ */
+ if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) == 0)
+ return;
+
+ if (phy->is_legacy_phy) {
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val |= USB_SUSP_SET;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+
+ usleep_range(10, 100);
+
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val &= ~USB_SUSP_SET;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+ } else {
+ set_phcd(phy, true);
+ }
+
+ if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0))
+ dev_err(phy->u_phy.dev,
+ "Timeout waiting for PHY to stabilize on disable\n");
+}
+
+static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
+{
+ void __iomem *base = phy->regs;
+ u32 val;
+
+ /*
+ * The USB driver may have already initiated the phy clock
+ * enable so wait to see if the clock turns on and if not
+ * then proceed with ungating the clock.
+ */
+ if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
+ USB_PHY_CLK_VALID) == 0)
+ return;
+
+ if (phy->is_legacy_phy) {
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val |= USB_SUSP_CLR;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+
+ usleep_range(10, 100);
+
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val &= ~USB_SUSP_CLR;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+ } else {
+ set_phcd(phy, false);
+ }
+
+ if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
+ USB_PHY_CLK_VALID))
+ dev_err(phy->u_phy.dev,
+ "Timeout waiting for PHY to stabilize on enable\n");
+}
+
+static int utmi_phy_power_on(struct tegra_usb_phy *phy)
+{
+ struct tegra_utmip_config *config = phy->config;
+ void __iomem *base = phy->regs;
+ u32 val;
+ int err;
+
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val |= UTMIP_RESET;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+
+ if (phy->is_legacy_phy) {
+ val = readl_relaxed(base + USB1_LEGACY_CTRL);
+ val |= USB1_NO_LEGACY_MODE;
+ writel_relaxed(val, base + USB1_LEGACY_CTRL);
+ }
+
+ val = readl_relaxed(base + UTMIP_TX_CFG0);
+ val |= UTMIP_FS_PREABMLE_J;
+ writel_relaxed(val, base + UTMIP_TX_CFG0);
+
+ val = readl_relaxed(base + UTMIP_HSRX_CFG0);
+ val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0));
+ val |= UTMIP_IDLE_WAIT(config->idle_wait_delay);
+ val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit);
+ writel_relaxed(val, base + UTMIP_HSRX_CFG0);
+
+ val = readl_relaxed(base + UTMIP_HSRX_CFG1);
+ val &= ~UTMIP_HS_SYNC_START_DLY(~0);
+ val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay);
+ writel_relaxed(val, base + UTMIP_HSRX_CFG1);
+
+ val = readl_relaxed(base + UTMIP_DEBOUNCE_CFG0);
+ val &= ~UTMIP_BIAS_DEBOUNCE_A(~0);
+ val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce);
+ writel_relaxed(val, base + UTMIP_DEBOUNCE_CFG0);
+
+ val = readl_relaxed(base + UTMIP_MISC_CFG0);
+ val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE;
+ writel_relaxed(val, base + UTMIP_MISC_CFG0);
+
+ if (!phy->soc_config->utmi_pll_config_in_car_module) {
+ val = readl_relaxed(base + UTMIP_MISC_CFG1);
+ val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) |
+ UTMIP_PLLU_STABLE_COUNT(~0));
+ val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) |
+ UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count);
+ writel_relaxed(val, base + UTMIP_MISC_CFG1);
+
+ val = readl_relaxed(base + UTMIP_PLL_CFG1);
+ val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) |
+ UTMIP_PLLU_ENABLE_DLY_COUNT(~0));
+ val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) |
+ UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay);
+ writel_relaxed(val, base + UTMIP_PLL_CFG1);
+ }
+
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val &= ~USB_WAKE_ON_RESUME_EN;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+
+ if (phy->mode != USB_DR_MODE_HOST) {
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+
+ val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+ val &= ~VBUS_WAKEUP_WAKEUP_EN;
+ val &= ~(ID_CHG_DET | VBUS_WAKEUP_CHG_DET);
+ writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+ val = readl_relaxed(base + USB_PHY_VBUS_SENSORS);
+ val &= ~(A_VBUS_VLD_WAKEUP_EN | A_SESS_VLD_WAKEUP_EN);
+ val &= ~(B_SESS_VLD_WAKEUP_EN);
+ writel_relaxed(val, base + USB_PHY_VBUS_SENSORS);
+
+ val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0);
+ val &= ~UTMIP_PD_CHRG;
+ writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0);
+ } else {
+ val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0);
+ val |= UTMIP_PD_CHRG;
+ writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0);
+ }
+
+ err = utmip_pad_power_on(phy);
+ if (err)
+ return err;
+
+ val = readl_relaxed(base + UTMIP_XCVR_CFG0);
+ val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
+ UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_LSBIAS_SEL |
+ UTMIP_XCVR_SETUP(~0) | UTMIP_XCVR_SETUP_MSB(~0) |
+ UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0));
+
+ if (!config->xcvr_setup_use_fuses) {
+ val |= UTMIP_XCVR_SETUP(config->xcvr_setup);
+ val |= UTMIP_XCVR_SETUP_MSB(config->xcvr_setup);
+ }
+ val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew);
+ val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew);
+
+ if (phy->soc_config->requires_extra_tuning_parameters) {
+ val &= ~(UTMIP_XCVR_HSSLEW(~0) | UTMIP_XCVR_HSSLEW_MSB(~0));
+ val |= UTMIP_XCVR_HSSLEW(config->xcvr_hsslew);
+ val |= UTMIP_XCVR_HSSLEW_MSB(config->xcvr_hsslew);
+ }
+ writel_relaxed(val, base + UTMIP_XCVR_CFG0);
+
+ val = readl_relaxed(base + UTMIP_XCVR_CFG1);
+ val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
+ UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0));
+ val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj);
+ writel_relaxed(val, base + UTMIP_XCVR_CFG1);
+
+ val = readl_relaxed(base + UTMIP_BIAS_CFG1);
+ val &= ~UTMIP_BIAS_PDTRK_COUNT(~0);
+ val |= UTMIP_BIAS_PDTRK_COUNT(0x5);
+ writel_relaxed(val, base + UTMIP_BIAS_CFG1);
+
+ val = readl_relaxed(base + UTMIP_SPARE_CFG0);
+ if (config->xcvr_setup_use_fuses)
+ val |= FUSE_SETUP_SEL;
+ else
+ val &= ~FUSE_SETUP_SEL;
+ writel_relaxed(val, base + UTMIP_SPARE_CFG0);
+
+ if (!phy->is_legacy_phy) {
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val |= UTMIP_PHY_ENABLE;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+ }
+
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val &= ~UTMIP_RESET;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+
+ if (phy->is_legacy_phy) {
+ val = readl_relaxed(base + USB1_LEGACY_CTRL);
+ val &= ~USB1_VBUS_SENSE_CTL_MASK;
+ val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD;
+ writel_relaxed(val, base + USB1_LEGACY_CTRL);
+
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val &= ~USB_SUSP_SET;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+ }
+
+ utmi_phy_clk_enable(phy);
+
+ if (phy->soc_config->requires_usbmode_setup) {
+ val = readl_relaxed(base + USB_USBMODE);
+ val &= ~USB_USBMODE_MASK;
+ if (phy->mode == USB_DR_MODE_HOST)
+ val |= USB_USBMODE_HOST;
+ else
+ val |= USB_USBMODE_DEVICE;
+ writel_relaxed(val, base + USB_USBMODE);
+ }
+
+ if (!phy->is_legacy_phy)
+ set_pts(phy, 0);
+
+ return 0;
+}
+
+static int utmi_phy_power_off(struct tegra_usb_phy *phy)
+{
+ void __iomem *base = phy->regs;
+ u32 val;
+
+ /*
+ * Give hardware time to settle down after VBUS disconnection,
+ * otherwise PHY will immediately wake up from suspend.
+ */
+ if (phy->wakeup_enabled && phy->mode != USB_DR_MODE_HOST)
+ readl_relaxed_poll_timeout(base + USB_PHY_VBUS_WAKEUP_ID,
+ val, !(val & VBUS_WAKEUP_STS),
+ 5000, 100000);
+
+ utmi_phy_clk_disable(phy);
+
+ /* PHY won't resume if reset is asserted */
+ if (!phy->wakeup_enabled) {
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val |= UTMIP_RESET;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+ }
+
+ val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0);
+ val |= UTMIP_PD_CHRG;
+ writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0);
+
+ if (!phy->wakeup_enabled) {
+ val = readl_relaxed(base + UTMIP_XCVR_CFG0);
+ val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
+ UTMIP_FORCE_PDZI_POWERDOWN;
+ writel_relaxed(val, base + UTMIP_XCVR_CFG0);
+ }
+
+ val = readl_relaxed(base + UTMIP_XCVR_CFG1);
+ val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
+ UTMIP_FORCE_PDDR_POWERDOWN;
+ writel_relaxed(val, base + UTMIP_XCVR_CFG1);
+
+ if (phy->wakeup_enabled) {
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0);
+ val |= USB_WAKEUP_DEBOUNCE_COUNT(5);
+ val |= USB_WAKE_ON_RESUME_EN;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+
+ /*
+ * Ask VBUS sensor to generate wake event once cable is
+ * connected.
+ */
+ if (phy->mode != USB_DR_MODE_HOST) {
+ val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+ val |= VBUS_WAKEUP_WAKEUP_EN;
+ val &= ~(ID_CHG_DET | VBUS_WAKEUP_CHG_DET);
+ writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+ val = readl_relaxed(base + USB_PHY_VBUS_SENSORS);
+ val |= A_VBUS_VLD_WAKEUP_EN;
+ writel_relaxed(val, base + USB_PHY_VBUS_SENSORS);
+ }
+ }
+
+ return utmip_pad_power_off(phy);
+}
+
+static void utmi_phy_preresume(struct tegra_usb_phy *phy)
+{
+ void __iomem *base = phy->regs;
+ u32 val;
+
+ val = readl_relaxed(base + UTMIP_TX_CFG0);
+ val |= UTMIP_HS_DISCON_DISABLE;
+ writel_relaxed(val, base + UTMIP_TX_CFG0);
+}
+
+static void utmi_phy_postresume(struct tegra_usb_phy *phy)
+{
+ void __iomem *base = phy->regs;
+ u32 val;
+
+ val = readl_relaxed(base + UTMIP_TX_CFG0);
+ val &= ~UTMIP_HS_DISCON_DISABLE;
+ writel_relaxed(val, base + UTMIP_TX_CFG0);
+}
+
+static void utmi_phy_restore_start(struct tegra_usb_phy *phy,
+ enum tegra_usb_phy_port_speed port_speed)
+{
+ void __iomem *base = phy->regs;
+ u32 val;
+
+ val = readl_relaxed(base + UTMIP_MISC_CFG0);
+ val &= ~UTMIP_DPDM_OBSERVE_SEL(~0);
+ if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
+ val |= UTMIP_DPDM_OBSERVE_SEL_FS_K;
+ else
+ val |= UTMIP_DPDM_OBSERVE_SEL_FS_J;
+ writel_relaxed(val, base + UTMIP_MISC_CFG0);
+ usleep_range(1, 10);
+
+ val = readl_relaxed(base + UTMIP_MISC_CFG0);
+ val |= UTMIP_DPDM_OBSERVE;
+ writel_relaxed(val, base + UTMIP_MISC_CFG0);
+ usleep_range(10, 100);
+}
+
+static void utmi_phy_restore_end(struct tegra_usb_phy *phy)
+{
+ void __iomem *base = phy->regs;
+ u32 val;
+
+ val = readl_relaxed(base + UTMIP_MISC_CFG0);
+ val &= ~UTMIP_DPDM_OBSERVE;
+ writel_relaxed(val, base + UTMIP_MISC_CFG0);
+ usleep_range(10, 100);
+}
+
+static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
+{
+ void __iomem *base = phy->regs;
+ u32 val;
+ int err;
+
+ gpiod_set_value_cansleep(phy->reset_gpio, 1);
+
+ err = clk_prepare_enable(phy->clk);
+ if (err)
+ return err;
+
+ usleep_range(5000, 6000);
+
+ gpiod_set_value_cansleep(phy->reset_gpio, 0);
+
+ usleep_range(1000, 2000);
+
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val |= UHSIC_RESET;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+
+ val = readl_relaxed(base + ULPI_TIMING_CTRL_0);
+ val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP;
+ writel_relaxed(val, base + ULPI_TIMING_CTRL_0);
+
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val |= ULPI_PHY_ENABLE;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+
+ val = 0;
+ writel_relaxed(val, base + ULPI_TIMING_CTRL_1);
+
+ val |= ULPI_DATA_TRIMMER_SEL(4);
+ val |= ULPI_STPDIRNXT_TRIMMER_SEL(4);
+ val |= ULPI_DIR_TRIMMER_SEL(4);
+ writel_relaxed(val, base + ULPI_TIMING_CTRL_1);
+ usleep_range(10, 100);
+
+ val |= ULPI_DATA_TRIMMER_LOAD;
+ val |= ULPI_STPDIRNXT_TRIMMER_LOAD;
+ val |= ULPI_DIR_TRIMMER_LOAD;
+ writel_relaxed(val, base + ULPI_TIMING_CTRL_1);
+
+ /* Fix VbusInvalid due to floating VBUS */
+ err = usb_phy_io_write(phy->ulpi, 0x40, 0x08);
+ if (err) {
+ dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", err);
+ goto disable_clk;
+ }
+
+ err = usb_phy_io_write(phy->ulpi, 0x80, 0x0B);
+ if (err) {
+ dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", err);
+ goto disable_clk;
+ }
+
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val |= USB_SUSP_CLR;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+ usleep_range(100, 1000);
+
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val &= ~USB_SUSP_CLR;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+
+ return 0;
+
+disable_clk:
+ clk_disable_unprepare(phy->clk);
+
+ return err;
+}
+
+static int ulpi_phy_power_off(struct tegra_usb_phy *phy)
+{
+ gpiod_set_value_cansleep(phy->reset_gpio, 1);
+ usleep_range(5000, 6000);
+ clk_disable_unprepare(phy->clk);
+
+ /*
+ * Wakeup currently unimplemented for ULPI, thus PHY needs to be
+ * force-resumed.
+ */
+ if (WARN_ON_ONCE(phy->wakeup_enabled)) {
+ ulpi_phy_power_on(phy);
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
+{
+ int err;
+
+ if (phy->powered_on)
+ return 0;
+
+ if (phy->is_ulpi_phy)
+ err = ulpi_phy_power_on(phy);
+ else
+ err = utmi_phy_power_on(phy);
+ if (err)
+ return err;
+
+ phy->powered_on = true;
+
+ /* Let PHY settle down */
+ usleep_range(2000, 2500);
+
+ return 0;
+}
+
+static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
+{
+ int err;
+
+ if (!phy->powered_on)
+ return 0;
+
+ if (phy->is_ulpi_phy)
+ err = ulpi_phy_power_off(phy);
+ else
+ err = utmi_phy_power_off(phy);
+ if (err)
+ return err;
+
+ phy->powered_on = false;
+
+ return 0;
+}
+
+static void tegra_usb_phy_shutdown(struct usb_phy *u_phy)
+{
+ struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+
+ if (WARN_ON(!phy->freq))
+ return;
+
+ usb_phy_set_wakeup(u_phy, false);
+ tegra_usb_phy_power_off(phy);
+
+ if (!phy->is_ulpi_phy)
+ utmip_pad_close(phy);
+
+ regulator_disable(phy->vbus);
+ clk_disable_unprepare(phy->pll_u);
+
+ phy->freq = NULL;
+}
+
+static irqreturn_t tegra_usb_phy_isr(int irq, void *data)
+{
+ u32 val, int_mask = ID_CHG_DET | VBUS_WAKEUP_CHG_DET;
+ struct tegra_usb_phy *phy = data;
+ void __iomem *base = phy->regs;
+
+ /*
+ * The PHY interrupt also wakes the USB controller driver since
+ * interrupt is shared. We don't do anything in the PHY driver,
+ * so just clear the interrupt.
+ */
+ val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+ writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+ return val & int_mask ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int tegra_usb_phy_set_wakeup(struct usb_phy *u_phy, bool enable)
+{
+ struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+ void __iomem *base = phy->regs;
+ int ret = 0;
+ u32 val;
+
+ if (phy->wakeup_enabled && phy->mode != USB_DR_MODE_HOST &&
+ phy->irq > 0) {
+ disable_irq(phy->irq);
+
+ val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+ val &= ~(ID_INT_EN | VBUS_WAKEUP_INT_EN);
+ writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+ enable_irq(phy->irq);
+
+ free_irq(phy->irq, phy);
+
+ phy->wakeup_enabled = false;
+ }
+
+ if (enable && phy->mode != USB_DR_MODE_HOST && phy->irq > 0) {
+ ret = request_irq(phy->irq, tegra_usb_phy_isr, IRQF_SHARED,
+ dev_name(phy->u_phy.dev), phy);
+ if (!ret) {
+ disable_irq(phy->irq);
+
+ /*
+ * USB clock will be resumed once wake event will be
+ * generated. The ID-change event requires to have
+ * interrupts enabled, otherwise it won't be generated.
+ */
+ val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+ val |= ID_INT_EN | VBUS_WAKEUP_INT_EN;
+ writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+ enable_irq(phy->irq);
+ } else {
+ dev_err(phy->u_phy.dev,
+ "Failed to request interrupt: %d", ret);
+ enable = false;
+ }
+ }
+
+ phy->wakeup_enabled = enable;
+
+ return ret;
+}
+
+static int tegra_usb_phy_set_suspend(struct usb_phy *u_phy, int suspend)
+{
+ struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+ int ret;
+
+ if (WARN_ON(!phy->freq))
+ return -EINVAL;
+
+ /*
+ * PHY is sharing IRQ with the CI driver, hence here we either
+ * disable interrupt for both PHY and CI or for CI only. The
+ * interrupt needs to be disabled while hardware is reprogrammed
+ * because interrupt touches the programmed registers, and thus,
+ * there could be a race condition.
+ */
+ if (phy->irq > 0)
+ disable_irq(phy->irq);
+
+ if (suspend)
+ ret = tegra_usb_phy_power_off(phy);
+ else
+ ret = tegra_usb_phy_power_on(phy);
+
+ if (phy->irq > 0)
+ enable_irq(phy->irq);
+
+ return ret;
+}
+
+static int tegra_usb_phy_configure_pmc(struct tegra_usb_phy *phy)
+{
+ int err, val = 0;
+
+ /* older device-trees don't have PMC regmap */
+ if (!phy->pmc_regmap)
+ return 0;
+
+ /*
+ * Tegra20 has a different layout of PMC USB register bits and AO is
+ * enabled by default after system reset on Tegra20, so assume nothing
+ * to do on Tegra20.
+ */
+ if (!phy->soc_config->requires_pmc_ao_power_up)
+ return 0;
+
+ /* enable VBUS wake-up detector */
+ if (phy->mode != USB_DR_MODE_HOST)
+ val |= VBUS_WAKEUP_PD_P0 << phy->instance * 4;
+
+ /* enable ID-pin ACC detector for OTG mode switching */
+ if (phy->mode == USB_DR_MODE_OTG)
+ val |= ID_PD_P0 << phy->instance * 4;
+
+ /* disable detectors to reset them */
+ err = regmap_set_bits(phy->pmc_regmap, PMC_USB_AO, val);
+ if (err) {
+ dev_err(phy->u_phy.dev, "Failed to disable PMC AO: %d\n", err);
+ return err;
+ }
+
+ usleep_range(10, 100);
+
+ /* enable detectors */
+ err = regmap_clear_bits(phy->pmc_regmap, PMC_USB_AO, val);
+ if (err) {
+ dev_err(phy->u_phy.dev, "Failed to enable PMC AO: %d\n", err);
+ return err;
+ }
+
+ /* detectors starts to work after 10ms */
+ usleep_range(10000, 15000);
+
+ return 0;
+}
+
+static int tegra_usb_phy_init(struct usb_phy *u_phy)
+{
+ struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+ unsigned long parent_rate;
+ unsigned int i;
+ int err;
+
+ if (WARN_ON(phy->freq))
+ return 0;
+
+ err = clk_prepare_enable(phy->pll_u);
+ if (err)
+ return err;
+
+ parent_rate = clk_get_rate(clk_get_parent(phy->pll_u));
+ for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) {
+ if (tegra_freq_table[i].freq == parent_rate) {
+ phy->freq = &tegra_freq_table[i];
+ break;
+ }
+ }
+ if (!phy->freq) {
+ dev_err(phy->u_phy.dev, "Invalid pll_u parent rate %ld\n",
+ parent_rate);
+ err = -EINVAL;
+ goto disable_clk;
+ }
+
+ err = regulator_enable(phy->vbus);
+ if (err) {
+ dev_err(phy->u_phy.dev,
+ "Failed to enable USB VBUS regulator: %d\n", err);
+ goto disable_clk;
+ }
+
+ if (!phy->is_ulpi_phy) {
+ err = utmip_pad_open(phy);
+ if (err)
+ goto disable_vbus;
+ }
+
+ err = tegra_usb_phy_configure_pmc(phy);
+ if (err)
+ goto close_phy;
+
+ err = tegra_usb_phy_power_on(phy);
+ if (err)
+ goto close_phy;
+
+ return 0;
+
+close_phy:
+ if (!phy->is_ulpi_phy)
+ utmip_pad_close(phy);
+
+disable_vbus:
+ regulator_disable(phy->vbus);
+
+disable_clk:
+ clk_disable_unprepare(phy->pll_u);
+
+ phy->freq = NULL;
+
+ return err;
+}
+
+void tegra_usb_phy_preresume(struct usb_phy *u_phy)
+{
+ struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+
+ if (!phy->is_ulpi_phy)
+ utmi_phy_preresume(phy);
+}
+EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume);
+
+void tegra_usb_phy_postresume(struct usb_phy *u_phy)
+{
+ struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+
+ if (!phy->is_ulpi_phy)
+ utmi_phy_postresume(phy);
+}
+EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume);
+
+void tegra_ehci_phy_restore_start(struct usb_phy *u_phy,
+ enum tegra_usb_phy_port_speed port_speed)
+{
+ struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+
+ if (!phy->is_ulpi_phy)
+ utmi_phy_restore_start(phy, port_speed);
+}
+EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start);
+
+void tegra_ehci_phy_restore_end(struct usb_phy *u_phy)
+{
+ struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+
+ if (!phy->is_ulpi_phy)
+ utmi_phy_restore_end(phy);
+}
+EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end);
+
+static int read_utmi_param(struct platform_device *pdev, const char *param,
+ u8 *dest)
+{
+ u32 value;
+ int err;
+
+ err = of_property_read_u32(pdev->dev.of_node, param, &value);
+ if (err)
+ dev_err(&pdev->dev,
+ "Failed to read USB UTMI parameter %s: %d\n",
+ param, err);
+ else
+ *dest = value;
+
+ return err;
+}
+
+static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy,
+ struct platform_device *pdev)
+{
+ struct tegra_utmip_config *config;
+ struct resource *res;
+ int err;
+
+ tegra_phy->is_ulpi_phy = false;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get UTMI pad regs\n");
+ return -ENXIO;
+ }
+
+ /*
+ * Note that UTMI pad registers are shared by all PHYs, therefore
+ * devm_platform_ioremap_resource() can't be used here.
+ */
+ tegra_phy->pad_regs = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!tegra_phy->pad_regs) {
+ dev_err(&pdev->dev, "Failed to remap UTMI pad regs\n");
+ return -ENOMEM;
+ }
+
+ tegra_phy->config = devm_kzalloc(&pdev->dev, sizeof(*config),
+ GFP_KERNEL);
+ if (!tegra_phy->config)
+ return -ENOMEM;
+
+ config = tegra_phy->config;
+
+ err = read_utmi_param(pdev, "nvidia,hssync-start-delay",
+ &config->hssync_start_delay);
+ if (err)
+ return err;
+
+ err = read_utmi_param(pdev, "nvidia,elastic-limit",
+ &config->elastic_limit);
+ if (err)
+ return err;
+
+ err = read_utmi_param(pdev, "nvidia,idle-wait-delay",
+ &config->idle_wait_delay);
+ if (err)
+ return err;
+
+ err = read_utmi_param(pdev, "nvidia,term-range-adj",
+ &config->term_range_adj);
+ if (err)
+ return err;
+
+ err = read_utmi_param(pdev, "nvidia,xcvr-lsfslew",
+ &config->xcvr_lsfslew);
+ if (err)
+ return err;
+
+ err = read_utmi_param(pdev, "nvidia,xcvr-lsrslew",
+ &config->xcvr_lsrslew);
+ if (err)
+ return err;
+
+ if (tegra_phy->soc_config->requires_extra_tuning_parameters) {
+ err = read_utmi_param(pdev, "nvidia,xcvr-hsslew",
+ &config->xcvr_hsslew);
+ if (err)
+ return err;
+
+ err = read_utmi_param(pdev, "nvidia,hssquelch-level",
+ &config->hssquelch_level);
+ if (err)
+ return err;
+
+ err = read_utmi_param(pdev, "nvidia,hsdiscon-level",
+ &config->hsdiscon_level);
+ if (err)
+ return err;
+ }
+
+ config->xcvr_setup_use_fuses = of_property_read_bool(
+ pdev->dev.of_node, "nvidia,xcvr-setup-use-fuses");
+
+ if (!config->xcvr_setup_use_fuses) {
+ err = read_utmi_param(pdev, "nvidia,xcvr-setup",
+ &config->xcvr_setup);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static void tegra_usb_phy_put_pmc_device(void *dev)
+{
+ put_device(dev);
+}
+
+static int tegra_usb_phy_parse_pmc(struct device *dev,
+ struct tegra_usb_phy *phy)
+{
+ struct platform_device *pmc_pdev;
+ struct of_phandle_args args;
+ int err;
+
+ err = of_parse_phandle_with_fixed_args(dev->of_node, "nvidia,pmc",
+ 1, 0, &args);
+ if (err) {
+ if (err != -ENOENT)
+ return err;
+
+ dev_warn_once(dev, "nvidia,pmc is missing, please update your device-tree\n");
+ return 0;
+ }
+
+ pmc_pdev = of_find_device_by_node(args.np);
+ of_node_put(args.np);
+ if (!pmc_pdev)
+ return -ENODEV;
+
+ err = devm_add_action_or_reset(dev, tegra_usb_phy_put_pmc_device,
+ &pmc_pdev->dev);
+ if (err)
+ return err;
+
+ if (!platform_get_drvdata(pmc_pdev))
+ return -EPROBE_DEFER;
+
+ phy->pmc_regmap = dev_get_regmap(&pmc_pdev->dev, "usb_sleepwalk");
+ if (!phy->pmc_regmap)
+ return -EINVAL;
+
+ phy->instance = args.args[0];
+
+ return 0;
+}
+
+static const struct tegra_phy_soc_config tegra20_soc_config = {
+ .utmi_pll_config_in_car_module = false,
+ .has_hostpc = false,
+ .requires_usbmode_setup = false,
+ .requires_extra_tuning_parameters = false,
+ .requires_pmc_ao_power_up = false,
+};
+
+static const struct tegra_phy_soc_config tegra30_soc_config = {
+ .utmi_pll_config_in_car_module = true,
+ .has_hostpc = true,
+ .requires_usbmode_setup = true,
+ .requires_extra_tuning_parameters = true,
+ .requires_pmc_ao_power_up = true,
+};
+
+static const struct of_device_id tegra_usb_phy_id_table[] = {
+ { .compatible = "nvidia,tegra30-usb-phy", .data = &tegra30_soc_config },
+ { .compatible = "nvidia,tegra20-usb-phy", .data = &tegra20_soc_config },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tegra_usb_phy_id_table);
+
+static int tegra_usb_phy_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct tegra_usb_phy *tegra_phy;
+ enum usb_phy_interface phy_type;
+ struct reset_control *reset;
+ struct gpio_desc *gpiod;
+ struct resource *res;
+ struct usb_phy *phy;
+ int err;
+
+ tegra_phy = devm_kzalloc(&pdev->dev, sizeof(*tegra_phy), GFP_KERNEL);
+ if (!tegra_phy)
+ return -ENOMEM;
+
+ tegra_phy->soc_config = of_device_get_match_data(&pdev->dev);
+ tegra_phy->irq = platform_get_irq_optional(pdev, 0);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get I/O memory\n");
+ return -ENXIO;
+ }
+
+ /*
+ * Note that PHY and USB controller are using shared registers,
+ * therefore devm_platform_ioremap_resource() can't be used here.
+ */
+ tegra_phy->regs = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!tegra_phy->regs) {
+ dev_err(&pdev->dev, "Failed to remap I/O memory\n");
+ return -ENOMEM;
+ }
+
+ tegra_phy->is_legacy_phy =
+ of_property_read_bool(np, "nvidia,has-legacy-mode");
+
+ if (of_find_property(np, "dr_mode", NULL))
+ tegra_phy->mode = usb_get_dr_mode(&pdev->dev);
+ else
+ tegra_phy->mode = USB_DR_MODE_HOST;
+
+ if (tegra_phy->mode == USB_DR_MODE_UNKNOWN) {
+ dev_err(&pdev->dev, "dr_mode is invalid\n");
+ return -EINVAL;
+ }
+
+ /* On some boards, the VBUS regulator doesn't need to be controlled */
+ tegra_phy->vbus = devm_regulator_get(&pdev->dev, "vbus");
+ if (IS_ERR(tegra_phy->vbus))
+ return PTR_ERR(tegra_phy->vbus);
+
+ tegra_phy->pll_u = devm_clk_get(&pdev->dev, "pll_u");
+ err = PTR_ERR_OR_ZERO(tegra_phy->pll_u);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to get pll_u clock: %d\n", err);
+ return err;
+ }
+
+ err = tegra_usb_phy_parse_pmc(&pdev->dev, tegra_phy);
+ if (err) {
+ dev_err_probe(&pdev->dev, err, "Failed to get PMC regmap\n");
+ return err;
+ }
+
+ phy_type = of_usb_get_phy_mode(np);
+ switch (phy_type) {
+ case USBPHY_INTERFACE_MODE_UTMI:
+ err = utmi_phy_probe(tegra_phy, pdev);
+ if (err)
+ return err;
+
+ tegra_phy->pad_clk = devm_clk_get(&pdev->dev, "utmi-pads");
+ err = PTR_ERR_OR_ZERO(tegra_phy->pad_clk);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Failed to get UTMIP pad clock: %d\n", err);
+ return err;
+ }
+
+ reset = devm_reset_control_get_optional_shared(&pdev->dev,
+ "utmi-pads");
+ err = PTR_ERR_OR_ZERO(reset);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Failed to get UTMI-pads reset: %d\n", err);
+ return err;
+ }
+ tegra_phy->pad_rst = reset;
+ break;
+
+ case USBPHY_INTERFACE_MODE_ULPI:
+ tegra_phy->is_ulpi_phy = true;
+
+ tegra_phy->clk = devm_clk_get(&pdev->dev, "ulpi-link");
+ err = PTR_ERR_OR_ZERO(tegra_phy->clk);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Failed to get ULPI clock: %d\n", err);
+ return err;
+ }
+
+ gpiod = devm_gpiod_get(&pdev->dev, "nvidia,phy-reset",
+ GPIOD_OUT_HIGH);
+ err = PTR_ERR_OR_ZERO(gpiod);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Request failed for reset GPIO: %d\n", err);
+ return err;
+ }
+
+ err = gpiod_set_consumer_name(gpiod, "ulpi_phy_reset_b");
+ if (err) {
+ dev_err(&pdev->dev,
+ "Failed to set up reset GPIO name: %d\n", err);
+ return err;
+ }
+
+ tegra_phy->reset_gpio = gpiod;
+
+ phy = devm_otg_ulpi_create(&pdev->dev,
+ &ulpi_viewport_access_ops, 0);
+ if (!phy) {
+ dev_err(&pdev->dev, "Failed to create ULPI OTG\n");
+ return -ENOMEM;
+ }
+
+ tegra_phy->ulpi = phy;
+ tegra_phy->ulpi->io_priv = tegra_phy->regs + ULPI_VIEWPORT;
+ break;
+
+ default:
+ dev_err(&pdev->dev, "phy_type %u is invalid or unsupported\n",
+ phy_type);
+ return -EINVAL;
+ }
+
+ tegra_phy->u_phy.dev = &pdev->dev;
+ tegra_phy->u_phy.init = tegra_usb_phy_init;
+ tegra_phy->u_phy.shutdown = tegra_usb_phy_shutdown;
+ tegra_phy->u_phy.set_wakeup = tegra_usb_phy_set_wakeup;
+ tegra_phy->u_phy.set_suspend = tegra_usb_phy_set_suspend;
+
+ platform_set_drvdata(pdev, tegra_phy);
+
+ return usb_add_phy_dev(&tegra_phy->u_phy);
+}
+
+static int tegra_usb_phy_remove(struct platform_device *pdev)
+{
+ struct tegra_usb_phy *tegra_phy = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&tegra_phy->u_phy);
+
+ return 0;
+}
+
+static struct platform_driver tegra_usb_phy_driver = {
+ .probe = tegra_usb_phy_probe,
+ .remove = tegra_usb_phy_remove,
+ .driver = {
+ .name = "tegra-phy",
+ .of_match_table = tegra_usb_phy_id_table,
+ },
+};
+module_platform_driver(tegra_usb_phy_driver);
+
+MODULE_DESCRIPTION("Tegra USB PHY driver");
+MODULE_LICENSE("GPL v2");