summaryrefslogtreecommitdiffstats
path: root/drivers/usb/phy/phy-twl6030-usb.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/usb/phy/phy-twl6030-usb.c460
1 files changed, 460 insertions, 0 deletions
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
new file mode 100644
index 000000000..ab3c38a7d
--- /dev/null
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Author: Hema HK <hemahk@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/usb/musb.h>
+#include <linux/usb/phy_companion.h>
+#include <linux/phy/omap_usb.h>
+#include <linux/mfd/twl.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+
+/* usb register definitions */
+#define USB_VENDOR_ID_LSB 0x00
+#define USB_VENDOR_ID_MSB 0x01
+#define USB_PRODUCT_ID_LSB 0x02
+#define USB_PRODUCT_ID_MSB 0x03
+#define USB_VBUS_CTRL_SET 0x04
+#define USB_VBUS_CTRL_CLR 0x05
+#define USB_ID_CTRL_SET 0x06
+#define USB_ID_CTRL_CLR 0x07
+#define USB_VBUS_INT_SRC 0x08
+#define USB_VBUS_INT_LATCH_SET 0x09
+#define USB_VBUS_INT_LATCH_CLR 0x0A
+#define USB_VBUS_INT_EN_LO_SET 0x0B
+#define USB_VBUS_INT_EN_LO_CLR 0x0C
+#define USB_VBUS_INT_EN_HI_SET 0x0D
+#define USB_VBUS_INT_EN_HI_CLR 0x0E
+#define USB_ID_INT_SRC 0x0F
+#define USB_ID_INT_LATCH_SET 0x10
+#define USB_ID_INT_LATCH_CLR 0x11
+
+#define USB_ID_INT_EN_LO_SET 0x12
+#define USB_ID_INT_EN_LO_CLR 0x13
+#define USB_ID_INT_EN_HI_SET 0x14
+#define USB_ID_INT_EN_HI_CLR 0x15
+#define USB_OTG_ADP_CTRL 0x16
+#define USB_OTG_ADP_HIGH 0x17
+#define USB_OTG_ADP_LOW 0x18
+#define USB_OTG_ADP_RISE 0x19
+#define USB_OTG_REVISION 0x1A
+
+/* to be moved to LDO */
+#define TWL6030_MISC2 0xE5
+#define TWL6030_CFG_LDO_PD2 0xF5
+#define TWL6030_BACKUP_REG 0xFA
+
+#define STS_HW_CONDITIONS 0x21
+
+/* In module TWL6030_MODULE_PM_MASTER */
+#define STS_HW_CONDITIONS 0x21
+#define STS_USB_ID BIT(2)
+
+/* In module TWL6030_MODULE_PM_RECEIVER */
+#define VUSB_CFG_TRANS 0x71
+#define VUSB_CFG_STATE 0x72
+#define VUSB_CFG_VOLTAGE 0x73
+
+/* in module TWL6030_MODULE_MAIN_CHARGE */
+
+#define CHARGERUSB_CTRL1 0x8
+
+#define CONTROLLER_STAT1 0x03
+#define VBUS_DET BIT(2)
+
+struct twl6030_usb {
+ struct phy_companion comparator;
+ struct device *dev;
+
+ /* for vbus reporting with irqs disabled */
+ spinlock_t lock;
+
+ struct regulator *usb3v3;
+
+ /* used to check initial cable status after probe */
+ struct delayed_work get_status_work;
+
+ /* used to set vbus, in atomic path */
+ struct work_struct set_vbus_work;
+
+ int irq1;
+ int irq2;
+ enum musb_vbus_id_status linkstat;
+ u8 asleep;
+ bool vbus_enable;
+};
+
+#define comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator)
+
+/*-------------------------------------------------------------------------*/
+
+static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module,
+ u8 data, u8 address)
+{
+ int ret = 0;
+
+ ret = twl_i2c_write_u8(module, data, address);
+ if (ret < 0)
+ dev_err(twl->dev,
+ "Write[0x%x] Error %d\n", address, ret);
+ return ret;
+}
+
+static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
+{
+ u8 data;
+ int ret;
+
+ ret = twl_i2c_read_u8(module, &data, address);
+ if (ret >= 0)
+ ret = data;
+ else
+ dev_err(twl->dev,
+ "readb[0x%x,0x%x] Error %d\n",
+ module, address, ret);
+ return ret;
+}
+
+static int twl6030_start_srp(struct phy_companion *comparator)
+{
+ struct twl6030_usb *twl = comparator_to_twl(comparator);
+
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET);
+
+ mdelay(100);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0xa0, USB_VBUS_CTRL_CLR);
+
+ return 0;
+}
+
+static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
+{
+ /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
+ twl6030_writeb(twl, TWL6030_MODULE_ID0, 0x1, TWL6030_BACKUP_REG);
+
+ /* Program CFG_LDO_PD2 register and set VUSB bit */
+ twl6030_writeb(twl, TWL6030_MODULE_ID0, 0x1, TWL6030_CFG_LDO_PD2);
+
+ /* Program MISC2 register and set bit VUSB_IN_VBAT */
+ twl6030_writeb(twl, TWL6030_MODULE_ID0, 0x10, TWL6030_MISC2);
+
+ twl->usb3v3 = regulator_get(twl->dev, "usb");
+ if (IS_ERR(twl->usb3v3))
+ return -ENODEV;
+
+ /* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
+
+ /*
+ * Program the USB_ID_CTRL_SET register to enable GND drive
+ * and the ID comparators
+ */
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET);
+
+ return 0;
+}
+
+static ssize_t vbus_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct twl6030_usb *twl = dev_get_drvdata(dev);
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ spin_lock_irqsave(&twl->lock, flags);
+
+ switch (twl->linkstat) {
+ case MUSB_VBUS_VALID:
+ ret = snprintf(buf, PAGE_SIZE, "vbus\n");
+ break;
+ case MUSB_ID_GROUND:
+ ret = snprintf(buf, PAGE_SIZE, "id\n");
+ break;
+ case MUSB_VBUS_OFF:
+ ret = snprintf(buf, PAGE_SIZE, "none\n");
+ break;
+ default:
+ ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
+ }
+ spin_unlock_irqrestore(&twl->lock, flags);
+
+ return ret;
+}
+static DEVICE_ATTR_RO(vbus);
+
+static struct attribute *twl6030_attrs[] = {
+ &dev_attr_vbus.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(twl6030);
+
+static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
+{
+ struct twl6030_usb *twl = _twl;
+ enum musb_vbus_id_status status = MUSB_UNKNOWN;
+ u8 vbus_state, hw_state;
+ int ret;
+
+ hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+ vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE,
+ CONTROLLER_STAT1);
+ if (!(hw_state & STS_USB_ID)) {
+ if (vbus_state & VBUS_DET) {
+ ret = regulator_enable(twl->usb3v3);
+ if (ret)
+ dev_err(twl->dev, "Failed to enable usb3v3\n");
+
+ twl->asleep = 1;
+ status = MUSB_VBUS_VALID;
+ twl->linkstat = status;
+ ret = musb_mailbox(status);
+ if (ret)
+ twl->linkstat = MUSB_UNKNOWN;
+ } else {
+ if (twl->linkstat != MUSB_UNKNOWN) {
+ status = MUSB_VBUS_OFF;
+ twl->linkstat = status;
+ ret = musb_mailbox(status);
+ if (ret)
+ twl->linkstat = MUSB_UNKNOWN;
+ if (twl->asleep) {
+ regulator_disable(twl->usb3v3);
+ twl->asleep = 0;
+ }
+ }
+ }
+ }
+ sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
+{
+ struct twl6030_usb *twl = _twl;
+ enum musb_vbus_id_status status = MUSB_UNKNOWN;
+ u8 hw_state;
+ int ret;
+
+ hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+ if (hw_state & STS_USB_ID) {
+ ret = regulator_enable(twl->usb3v3);
+ if (ret)
+ dev_err(twl->dev, "Failed to enable usb3v3\n");
+
+ twl->asleep = 1;
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
+ status = MUSB_ID_GROUND;
+ twl->linkstat = status;
+ ret = musb_mailbox(status);
+ if (ret)
+ twl->linkstat = MUSB_UNKNOWN;
+ } else {
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
+ }
+ twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
+
+ return IRQ_HANDLED;
+}
+
+static void twl6030_status_work(struct work_struct *work)
+{
+ struct twl6030_usb *twl = container_of(work, struct twl6030_usb,
+ get_status_work.work);
+
+ twl6030_usb_irq(twl->irq2, twl);
+ twl6030_usbotg_irq(twl->irq1, twl);
+}
+
+static int twl6030_enable_irq(struct twl6030_usb *twl)
+{
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
+ twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
+ twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
+
+ twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
+ REG_INT_MSK_LINE_C);
+ twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
+ REG_INT_MSK_STS_C);
+
+ return 0;
+}
+
+static void otg_set_vbus_work(struct work_struct *data)
+{
+ struct twl6030_usb *twl = container_of(data, struct twl6030_usb,
+ set_vbus_work);
+
+ /*
+ * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1
+ * register. This enables boost mode.
+ */
+
+ if (twl->vbus_enable)
+ twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE, 0x40,
+ CHARGERUSB_CTRL1);
+ else
+ twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE, 0x00,
+ CHARGERUSB_CTRL1);
+}
+
+static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled)
+{
+ struct twl6030_usb *twl = comparator_to_twl(comparator);
+
+ twl->vbus_enable = enabled;
+ schedule_work(&twl->set_vbus_work);
+
+ return 0;
+}
+
+static int twl6030_usb_probe(struct platform_device *pdev)
+{
+ u32 ret;
+ struct twl6030_usb *twl;
+ int status, err;
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+
+ if (!np) {
+ dev_err(dev, "no DT info\n");
+ return -EINVAL;
+ }
+
+ twl = devm_kzalloc(dev, sizeof(*twl), GFP_KERNEL);
+ if (!twl)
+ return -ENOMEM;
+
+ twl->dev = &pdev->dev;
+ twl->irq1 = platform_get_irq(pdev, 0);
+ twl->irq2 = platform_get_irq(pdev, 1);
+ twl->linkstat = MUSB_UNKNOWN;
+
+ if (twl->irq1 < 0)
+ return twl->irq1;
+ if (twl->irq2 < 0)
+ return twl->irq2;
+
+ twl->comparator.set_vbus = twl6030_set_vbus;
+ twl->comparator.start_srp = twl6030_start_srp;
+
+ ret = omap_usb2_set_comparator(&twl->comparator);
+ if (ret == -ENODEV) {
+ dev_info(&pdev->dev, "phy not ready, deferring probe");
+ return -EPROBE_DEFER;
+ }
+
+ /* init spinlock for workqueue */
+ spin_lock_init(&twl->lock);
+
+ err = twl6030_usb_ldo_init(twl);
+ if (err) {
+ dev_err(&pdev->dev, "ldo init failed\n");
+ return err;
+ }
+
+ platform_set_drvdata(pdev, twl);
+
+ INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);
+ INIT_DELAYED_WORK(&twl->get_status_work, twl6030_status_work);
+
+ status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "twl6030_usb", twl);
+ if (status < 0) {
+ dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+ twl->irq1, status);
+ goto err_put_regulator;
+ }
+
+ status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "twl6030_usb", twl);
+ if (status < 0) {
+ dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+ twl->irq2, status);
+ goto err_free_irq1;
+ }
+
+ twl->asleep = 0;
+ twl6030_enable_irq(twl);
+ schedule_delayed_work(&twl->get_status_work, HZ);
+ dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
+
+ return 0;
+
+err_free_irq1:
+ free_irq(twl->irq1, twl);
+err_put_regulator:
+ regulator_put(twl->usb3v3);
+
+ return status;
+}
+
+static int twl6030_usb_remove(struct platform_device *pdev)
+{
+ struct twl6030_usb *twl = platform_get_drvdata(pdev);
+
+ cancel_delayed_work_sync(&twl->get_status_work);
+ twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
+ REG_INT_MSK_LINE_C);
+ twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
+ REG_INT_MSK_STS_C);
+ free_irq(twl->irq1, twl);
+ free_irq(twl->irq2, twl);
+ regulator_put(twl->usb3v3);
+ cancel_work_sync(&twl->set_vbus_work);
+
+ return 0;
+}
+
+static const struct of_device_id twl6030_usb_id_table[] = {
+ { .compatible = "ti,twl6030-usb" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, twl6030_usb_id_table);
+
+static struct platform_driver twl6030_usb_driver = {
+ .probe = twl6030_usb_probe,
+ .remove = twl6030_usb_remove,
+ .driver = {
+ .name = "twl6030_usb",
+ .of_match_table = of_match_ptr(twl6030_usb_id_table),
+ .dev_groups = twl6030_groups,
+ },
+};
+
+static int __init twl6030_usb_init(void)
+{
+ return platform_driver_register(&twl6030_usb_driver);
+}
+subsys_initcall(twl6030_usb_init);
+
+static void __exit twl6030_usb_exit(void)
+{
+ platform_driver_unregister(&twl6030_usb_driver);
+}
+module_exit(twl6030_usb_exit);
+
+MODULE_ALIAS("platform:twl6030_usb");
+MODULE_AUTHOR("Hema HK <hemahk@ti.com>");
+MODULE_DESCRIPTION("TWL6030 USB transceiver driver");
+MODULE_LICENSE("GPL");