summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/digi_acceleport.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/digi_acceleport.c')
-rw-r--r--drivers/usb/serial/digi_acceleport.c1534
1 files changed, 1534 insertions, 0 deletions
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
new file mode 100644
index 000000000..45d688e9b
--- /dev/null
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -0,0 +1,1534 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+* Digi AccelePort USB-4 and USB-2 Serial Converters
+*
+* Copyright 2000 by Digi International
+*
+* Shamelessly based on Brian Warner's keyspan_pda.c and Greg Kroah-Hartman's
+* usb-serial driver.
+*
+* Peter Berger (pberger@brimson.com)
+* Al Borchers (borchers@steinerpoint.com)
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/wait.h>
+#include <linux/sched/signal.h>
+#include <linux/usb/serial.h>
+
+/* Defines */
+
+#define DRIVER_AUTHOR "Peter Berger <pberger@brimson.com>, Al Borchers <borchers@steinerpoint.com>"
+#define DRIVER_DESC "Digi AccelePort USB-2/USB-4 Serial Converter driver"
+
+/* port output buffer length -- must be <= transfer buffer length - 2 */
+/* so we can be sure to send the full buffer in one urb */
+#define DIGI_OUT_BUF_SIZE 8
+
+/* port input buffer length -- must be >= transfer buffer length - 3 */
+/* so we can be sure to hold at least one full buffer from one urb */
+#define DIGI_IN_BUF_SIZE 64
+
+/* retry timeout while sleeping */
+#define DIGI_RETRY_TIMEOUT (HZ/10)
+
+/* timeout while waiting for tty output to drain in close */
+/* this delay is used twice in close, so the total delay could */
+/* be twice this value */
+#define DIGI_CLOSE_TIMEOUT (5*HZ)
+
+
+/* AccelePort USB Defines */
+
+/* ids */
+#define DIGI_VENDOR_ID 0x05c5
+#define DIGI_2_ID 0x0002 /* USB-2 */
+#define DIGI_4_ID 0x0004 /* USB-4 */
+
+/* commands
+ * "INB": can be used on the in-band endpoint
+ * "OOB": can be used on the out-of-band endpoint
+ */
+#define DIGI_CMD_SET_BAUD_RATE 0 /* INB, OOB */
+#define DIGI_CMD_SET_WORD_SIZE 1 /* INB, OOB */
+#define DIGI_CMD_SET_PARITY 2 /* INB, OOB */
+#define DIGI_CMD_SET_STOP_BITS 3 /* INB, OOB */
+#define DIGI_CMD_SET_INPUT_FLOW_CONTROL 4 /* INB, OOB */
+#define DIGI_CMD_SET_OUTPUT_FLOW_CONTROL 5 /* INB, OOB */
+#define DIGI_CMD_SET_DTR_SIGNAL 6 /* INB, OOB */
+#define DIGI_CMD_SET_RTS_SIGNAL 7 /* INB, OOB */
+#define DIGI_CMD_READ_INPUT_SIGNALS 8 /* OOB */
+#define DIGI_CMD_IFLUSH_FIFO 9 /* OOB */
+#define DIGI_CMD_RECEIVE_ENABLE 10 /* INB, OOB */
+#define DIGI_CMD_BREAK_CONTROL 11 /* INB, OOB */
+#define DIGI_CMD_LOCAL_LOOPBACK 12 /* INB, OOB */
+#define DIGI_CMD_TRANSMIT_IDLE 13 /* INB, OOB */
+#define DIGI_CMD_READ_UART_REGISTER 14 /* OOB */
+#define DIGI_CMD_WRITE_UART_REGISTER 15 /* INB, OOB */
+#define DIGI_CMD_AND_UART_REGISTER 16 /* INB, OOB */
+#define DIGI_CMD_OR_UART_REGISTER 17 /* INB, OOB */
+#define DIGI_CMD_SEND_DATA 18 /* INB */
+#define DIGI_CMD_RECEIVE_DATA 19 /* INB */
+#define DIGI_CMD_RECEIVE_DISABLE 20 /* INB */
+#define DIGI_CMD_GET_PORT_TYPE 21 /* OOB */
+
+/* baud rates */
+#define DIGI_BAUD_50 0
+#define DIGI_BAUD_75 1
+#define DIGI_BAUD_110 2
+#define DIGI_BAUD_150 3
+#define DIGI_BAUD_200 4
+#define DIGI_BAUD_300 5
+#define DIGI_BAUD_600 6
+#define DIGI_BAUD_1200 7
+#define DIGI_BAUD_1800 8
+#define DIGI_BAUD_2400 9
+#define DIGI_BAUD_4800 10
+#define DIGI_BAUD_7200 11
+#define DIGI_BAUD_9600 12
+#define DIGI_BAUD_14400 13
+#define DIGI_BAUD_19200 14
+#define DIGI_BAUD_28800 15
+#define DIGI_BAUD_38400 16
+#define DIGI_BAUD_57600 17
+#define DIGI_BAUD_76800 18
+#define DIGI_BAUD_115200 19
+#define DIGI_BAUD_153600 20
+#define DIGI_BAUD_230400 21
+#define DIGI_BAUD_460800 22
+
+/* arguments */
+#define DIGI_WORD_SIZE_5 0
+#define DIGI_WORD_SIZE_6 1
+#define DIGI_WORD_SIZE_7 2
+#define DIGI_WORD_SIZE_8 3
+
+#define DIGI_PARITY_NONE 0
+#define DIGI_PARITY_ODD 1
+#define DIGI_PARITY_EVEN 2
+#define DIGI_PARITY_MARK 3
+#define DIGI_PARITY_SPACE 4
+
+#define DIGI_STOP_BITS_1 0
+#define DIGI_STOP_BITS_2 1
+
+#define DIGI_INPUT_FLOW_CONTROL_XON_XOFF 1
+#define DIGI_INPUT_FLOW_CONTROL_RTS 2
+#define DIGI_INPUT_FLOW_CONTROL_DTR 4
+
+#define DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF 1
+#define DIGI_OUTPUT_FLOW_CONTROL_CTS 2
+#define DIGI_OUTPUT_FLOW_CONTROL_DSR 4
+
+#define DIGI_DTR_INACTIVE 0
+#define DIGI_DTR_ACTIVE 1
+#define DIGI_DTR_INPUT_FLOW_CONTROL 2
+
+#define DIGI_RTS_INACTIVE 0
+#define DIGI_RTS_ACTIVE 1
+#define DIGI_RTS_INPUT_FLOW_CONTROL 2
+#define DIGI_RTS_TOGGLE 3
+
+#define DIGI_FLUSH_TX 1
+#define DIGI_FLUSH_RX 2
+#define DIGI_RESUME_TX 4 /* clears xoff condition */
+
+#define DIGI_TRANSMIT_NOT_IDLE 0
+#define DIGI_TRANSMIT_IDLE 1
+
+#define DIGI_DISABLE 0
+#define DIGI_ENABLE 1
+
+#define DIGI_DEASSERT 0
+#define DIGI_ASSERT 1
+
+/* in band status codes */
+#define DIGI_OVERRUN_ERROR 4
+#define DIGI_PARITY_ERROR 8
+#define DIGI_FRAMING_ERROR 16
+#define DIGI_BREAK_ERROR 32
+
+/* out of band status */
+#define DIGI_NO_ERROR 0
+#define DIGI_BAD_FIRST_PARAMETER 1
+#define DIGI_BAD_SECOND_PARAMETER 2
+#define DIGI_INVALID_LINE 3
+#define DIGI_INVALID_OPCODE 4
+
+/* input signals */
+#define DIGI_READ_INPUT_SIGNALS_SLOT 1
+#define DIGI_READ_INPUT_SIGNALS_ERR 2
+#define DIGI_READ_INPUT_SIGNALS_BUSY 4
+#define DIGI_READ_INPUT_SIGNALS_PE 8
+#define DIGI_READ_INPUT_SIGNALS_CTS 16
+#define DIGI_READ_INPUT_SIGNALS_DSR 32
+#define DIGI_READ_INPUT_SIGNALS_RI 64
+#define DIGI_READ_INPUT_SIGNALS_DCD 128
+
+
+/* Structures */
+
+struct digi_serial {
+ spinlock_t ds_serial_lock;
+ struct usb_serial_port *ds_oob_port; /* out-of-band port */
+ int ds_oob_port_num; /* index of out-of-band port */
+ int ds_device_started;
+};
+
+struct digi_port {
+ spinlock_t dp_port_lock;
+ int dp_port_num;
+ int dp_out_buf_len;
+ unsigned char dp_out_buf[DIGI_OUT_BUF_SIZE];
+ int dp_write_urb_in_use;
+ unsigned int dp_modem_signals;
+ int dp_transmit_idle;
+ wait_queue_head_t dp_transmit_idle_wait;
+ int dp_throttled;
+ int dp_throttle_restart;
+ wait_queue_head_t dp_flush_wait;
+ wait_queue_head_t dp_close_wait; /* wait queue for close */
+ wait_queue_head_t write_wait;
+ struct usb_serial_port *dp_port;
+};
+
+
+/* Local Function Declarations */
+
+static int digi_write_oob_command(struct usb_serial_port *port,
+ unsigned char *buf, int count, int interruptible);
+static int digi_write_inb_command(struct usb_serial_port *port,
+ unsigned char *buf, int count, unsigned long timeout);
+static int digi_set_modem_signals(struct usb_serial_port *port,
+ unsigned int modem_signals, int interruptible);
+static int digi_transmit_idle(struct usb_serial_port *port,
+ unsigned long timeout);
+static void digi_rx_throttle(struct tty_struct *tty);
+static void digi_rx_unthrottle(struct tty_struct *tty);
+static void digi_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ const struct ktermios *old_termios);
+static void digi_break_ctl(struct tty_struct *tty, int break_state);
+static int digi_tiocmget(struct tty_struct *tty);
+static int digi_tiocmset(struct tty_struct *tty, unsigned int set,
+ unsigned int clear);
+static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count);
+static void digi_write_bulk_callback(struct urb *urb);
+static unsigned int digi_write_room(struct tty_struct *tty);
+static unsigned int digi_chars_in_buffer(struct tty_struct *tty);
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
+static void digi_close(struct usb_serial_port *port);
+static void digi_dtr_rts(struct usb_serial_port *port, int on);
+static int digi_startup_device(struct usb_serial *serial);
+static int digi_startup(struct usb_serial *serial);
+static void digi_disconnect(struct usb_serial *serial);
+static void digi_release(struct usb_serial *serial);
+static int digi_port_probe(struct usb_serial_port *port);
+static void digi_port_remove(struct usb_serial_port *port);
+static void digi_read_bulk_callback(struct urb *urb);
+static int digi_read_inb_callback(struct urb *urb);
+static int digi_read_oob_callback(struct urb *urb);
+
+
+static const struct usb_device_id id_table_combined[] = {
+ { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
+ { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
+ { } /* Terminating entry */
+};
+
+static const struct usb_device_id id_table_2[] = {
+ { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
+ { } /* Terminating entry */
+};
+
+static const struct usb_device_id id_table_4[] = {
+ { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table_combined);
+
+/* device info needed for the Digi serial converter */
+
+static struct usb_serial_driver digi_acceleport_2_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "digi_2",
+ },
+ .description = "Digi 2 port USB adapter",
+ .id_table = id_table_2,
+ .num_ports = 3,
+ .num_bulk_in = 4,
+ .num_bulk_out = 4,
+ .open = digi_open,
+ .close = digi_close,
+ .dtr_rts = digi_dtr_rts,
+ .write = digi_write,
+ .write_room = digi_write_room,
+ .write_bulk_callback = digi_write_bulk_callback,
+ .read_bulk_callback = digi_read_bulk_callback,
+ .chars_in_buffer = digi_chars_in_buffer,
+ .throttle = digi_rx_throttle,
+ .unthrottle = digi_rx_unthrottle,
+ .set_termios = digi_set_termios,
+ .break_ctl = digi_break_ctl,
+ .tiocmget = digi_tiocmget,
+ .tiocmset = digi_tiocmset,
+ .attach = digi_startup,
+ .disconnect = digi_disconnect,
+ .release = digi_release,
+ .port_probe = digi_port_probe,
+ .port_remove = digi_port_remove,
+};
+
+static struct usb_serial_driver digi_acceleport_4_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "digi_4",
+ },
+ .description = "Digi 4 port USB adapter",
+ .id_table = id_table_4,
+ .num_ports = 4,
+ .num_bulk_in = 5,
+ .num_bulk_out = 5,
+ .open = digi_open,
+ .close = digi_close,
+ .write = digi_write,
+ .write_room = digi_write_room,
+ .write_bulk_callback = digi_write_bulk_callback,
+ .read_bulk_callback = digi_read_bulk_callback,
+ .chars_in_buffer = digi_chars_in_buffer,
+ .throttle = digi_rx_throttle,
+ .unthrottle = digi_rx_unthrottle,
+ .set_termios = digi_set_termios,
+ .break_ctl = digi_break_ctl,
+ .tiocmget = digi_tiocmget,
+ .tiocmset = digi_tiocmset,
+ .attach = digi_startup,
+ .disconnect = digi_disconnect,
+ .release = digi_release,
+ .port_probe = digi_port_probe,
+ .port_remove = digi_port_remove,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+ &digi_acceleport_2_device, &digi_acceleport_4_device, NULL
+};
+
+/* Functions */
+
+/*
+ * Cond Wait Interruptible Timeout Irqrestore
+ *
+ * Do spin_unlock_irqrestore and interruptible_sleep_on_timeout
+ * so that wake ups are not lost if they occur between the unlock
+ * and the sleep. In other words, spin_unlock_irqrestore and
+ * interruptible_sleep_on_timeout are "atomic" with respect to
+ * wake ups. This is used to implement condition variables.
+ *
+ * interruptible_sleep_on_timeout is deprecated and has been replaced
+ * with the equivalent code.
+ */
+
+static long cond_wait_interruptible_timeout_irqrestore(
+ wait_queue_head_t *q, long timeout,
+ spinlock_t *lock, unsigned long flags)
+__releases(lock)
+{
+ DEFINE_WAIT(wait);
+
+ prepare_to_wait(q, &wait, TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(lock, flags);
+ timeout = schedule_timeout(timeout);
+ finish_wait(q, &wait);
+
+ return timeout;
+}
+
+/*
+ * Digi Write OOB Command
+ *
+ * Write commands on the out of band port. Commands are 4
+ * bytes each, multiple commands can be sent at once, and
+ * no command will be split across USB packets. Returns 0
+ * if successful, -EINTR if interrupted while sleeping and
+ * the interruptible flag is true, or a negative error
+ * returned by usb_submit_urb.
+ */
+
+static int digi_write_oob_command(struct usb_serial_port *port,
+ unsigned char *buf, int count, int interruptible)
+{
+ int ret = 0;
+ int len;
+ struct usb_serial_port *oob_port = (struct usb_serial_port *)((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
+ struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
+ unsigned long flags;
+
+ dev_dbg(&port->dev,
+ "digi_write_oob_command: TOP: port=%d, count=%d\n",
+ oob_priv->dp_port_num, count);
+
+ spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
+ while (count > 0) {
+ while (oob_priv->dp_write_urb_in_use) {
+ cond_wait_interruptible_timeout_irqrestore(
+ &oob_priv->write_wait, DIGI_RETRY_TIMEOUT,
+ &oob_priv->dp_port_lock, flags);
+ if (interruptible && signal_pending(current))
+ return -EINTR;
+ spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
+ }
+
+ /* len must be a multiple of 4, so commands are not split */
+ len = min(count, oob_port->bulk_out_size);
+ if (len > 4)
+ len &= ~3;
+ memcpy(oob_port->write_urb->transfer_buffer, buf, len);
+ oob_port->write_urb->transfer_buffer_length = len;
+ ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
+ if (ret == 0) {
+ oob_priv->dp_write_urb_in_use = 1;
+ count -= len;
+ buf += len;
+ }
+ }
+ spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
+ if (ret)
+ dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
+ __func__, ret);
+ return ret;
+
+}
+
+
+/*
+ * Digi Write In Band Command
+ *
+ * Write commands on the given port. Commands are 4
+ * bytes each, multiple commands can be sent at once, and
+ * no command will be split across USB packets. If timeout
+ * is non-zero, write in band command will return after
+ * waiting unsuccessfully for the URB status to clear for
+ * timeout ticks. Returns 0 if successful, or a negative
+ * error returned by digi_write.
+ */
+
+static int digi_write_inb_command(struct usb_serial_port *port,
+ unsigned char *buf, int count, unsigned long timeout)
+{
+ int ret = 0;
+ int len;
+ struct digi_port *priv = usb_get_serial_port_data(port);
+ unsigned char *data = port->write_urb->transfer_buffer;
+ unsigned long flags;
+
+ dev_dbg(&port->dev, "digi_write_inb_command: TOP: port=%d, count=%d\n",
+ priv->dp_port_num, count);
+
+ if (timeout)
+ timeout += jiffies;
+ else
+ timeout = ULONG_MAX;
+
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+ while (count > 0 && ret == 0) {
+ while (priv->dp_write_urb_in_use &&
+ time_before(jiffies, timeout)) {
+ cond_wait_interruptible_timeout_irqrestore(
+ &priv->write_wait, DIGI_RETRY_TIMEOUT,
+ &priv->dp_port_lock, flags);
+ if (signal_pending(current))
+ return -EINTR;
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+ }
+
+ /* len must be a multiple of 4 and small enough to */
+ /* guarantee the write will send buffered data first, */
+ /* so commands are in order with data and not split */
+ len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
+ if (len > 4)
+ len &= ~3;
+
+ /* write any buffered data first */
+ if (priv->dp_out_buf_len > 0) {
+ data[0] = DIGI_CMD_SEND_DATA;
+ data[1] = priv->dp_out_buf_len;
+ memcpy(data + 2, priv->dp_out_buf,
+ priv->dp_out_buf_len);
+ memcpy(data + 2 + priv->dp_out_buf_len, buf, len);
+ port->write_urb->transfer_buffer_length
+ = priv->dp_out_buf_len + 2 + len;
+ } else {
+ memcpy(data, buf, len);
+ port->write_urb->transfer_buffer_length = len;
+ }
+
+ ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+ if (ret == 0) {
+ priv->dp_write_urb_in_use = 1;
+ priv->dp_out_buf_len = 0;
+ count -= len;
+ buf += len;
+ }
+
+ }
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
+ if (ret)
+ dev_err(&port->dev,
+ "%s: usb_submit_urb failed, ret=%d, port=%d\n",
+ __func__, ret, priv->dp_port_num);
+ return ret;
+}
+
+
+/*
+ * Digi Set Modem Signals
+ *
+ * Sets or clears DTR and RTS on the port, according to the
+ * modem_signals argument. Use TIOCM_DTR and TIOCM_RTS flags
+ * for the modem_signals argument. Returns 0 if successful,
+ * -EINTR if interrupted while sleeping, or a non-zero error
+ * returned by usb_submit_urb.
+ */
+
+static int digi_set_modem_signals(struct usb_serial_port *port,
+ unsigned int modem_signals, int interruptible)
+{
+
+ int ret;
+ struct digi_port *port_priv = usb_get_serial_port_data(port);
+ struct usb_serial_port *oob_port = (struct usb_serial_port *) ((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
+ struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
+ unsigned char *data = oob_port->write_urb->transfer_buffer;
+ unsigned long flags;
+
+ dev_dbg(&port->dev,
+ "digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x\n",
+ port_priv->dp_port_num, modem_signals);
+
+ spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
+ spin_lock(&port_priv->dp_port_lock);
+
+ while (oob_priv->dp_write_urb_in_use) {
+ spin_unlock(&port_priv->dp_port_lock);
+ cond_wait_interruptible_timeout_irqrestore(
+ &oob_priv->write_wait, DIGI_RETRY_TIMEOUT,
+ &oob_priv->dp_port_lock, flags);
+ if (interruptible && signal_pending(current))
+ return -EINTR;
+ spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
+ spin_lock(&port_priv->dp_port_lock);
+ }
+ data[0] = DIGI_CMD_SET_DTR_SIGNAL;
+ data[1] = port_priv->dp_port_num;
+ data[2] = (modem_signals & TIOCM_DTR) ?
+ DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE;
+ data[3] = 0;
+ data[4] = DIGI_CMD_SET_RTS_SIGNAL;
+ data[5] = port_priv->dp_port_num;
+ data[6] = (modem_signals & TIOCM_RTS) ?
+ DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE;
+ data[7] = 0;
+
+ oob_port->write_urb->transfer_buffer_length = 8;
+
+ ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
+ if (ret == 0) {
+ oob_priv->dp_write_urb_in_use = 1;
+ port_priv->dp_modem_signals &= ~(TIOCM_DTR | TIOCM_RTS);
+ port_priv->dp_modem_signals |=
+ modem_signals & (TIOCM_DTR | TIOCM_RTS);
+ }
+ spin_unlock(&port_priv->dp_port_lock);
+ spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
+ if (ret)
+ dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
+ __func__, ret);
+ return ret;
+}
+
+/*
+ * Digi Transmit Idle
+ *
+ * Digi transmit idle waits, up to timeout ticks, for the transmitter
+ * to go idle. It returns 0 if successful or a negative error.
+ *
+ * There are race conditions here if more than one process is calling
+ * digi_transmit_idle on the same port at the same time. However, this
+ * is only called from close, and only one process can be in close on a
+ * port at a time, so its ok.
+ */
+
+static int digi_transmit_idle(struct usb_serial_port *port,
+ unsigned long timeout)
+{
+ int ret;
+ unsigned char buf[2];
+ struct digi_port *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+ priv->dp_transmit_idle = 0;
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
+ buf[0] = DIGI_CMD_TRANSMIT_IDLE;
+ buf[1] = 0;
+
+ timeout += jiffies;
+
+ ret = digi_write_inb_command(port, buf, 2, timeout - jiffies);
+ if (ret != 0)
+ return ret;
+
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+
+ while (time_before(jiffies, timeout) && !priv->dp_transmit_idle) {
+ cond_wait_interruptible_timeout_irqrestore(
+ &priv->dp_transmit_idle_wait, DIGI_RETRY_TIMEOUT,
+ &priv->dp_port_lock, flags);
+ if (signal_pending(current))
+ return -EINTR;
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+ }
+ priv->dp_transmit_idle = 0;
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+ return 0;
+
+}
+
+
+static void digi_rx_throttle(struct tty_struct *tty)
+{
+ unsigned long flags;
+ struct usb_serial_port *port = tty->driver_data;
+ struct digi_port *priv = usb_get_serial_port_data(port);
+
+ /* stop receiving characters by not resubmitting the read urb */
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+ priv->dp_throttled = 1;
+ priv->dp_throttle_restart = 0;
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+}
+
+
+static void digi_rx_unthrottle(struct tty_struct *tty)
+{
+ int ret = 0;
+ unsigned long flags;
+ struct usb_serial_port *port = tty->driver_data;
+ struct digi_port *priv = usb_get_serial_port_data(port);
+
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+
+ /* restart read chain */
+ if (priv->dp_throttle_restart)
+ ret = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+
+ /* turn throttle off */
+ priv->dp_throttled = 0;
+ priv->dp_throttle_restart = 0;
+
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
+ if (ret)
+ dev_err(&port->dev,
+ "%s: usb_submit_urb failed, ret=%d, port=%d\n",
+ __func__, ret, priv->dp_port_num);
+}
+
+
+static void digi_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ const struct ktermios *old_termios)
+{
+ struct digi_port *priv = usb_get_serial_port_data(port);
+ struct device *dev = &port->dev;
+ unsigned int iflag = tty->termios.c_iflag;
+ unsigned int cflag = tty->termios.c_cflag;
+ unsigned int old_iflag = old_termios->c_iflag;
+ unsigned int old_cflag = old_termios->c_cflag;
+ unsigned char buf[32];
+ unsigned int modem_signals;
+ int arg, ret;
+ int i = 0;
+ speed_t baud;
+
+ dev_dbg(dev,
+ "digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x\n",
+ priv->dp_port_num, iflag, old_iflag, cflag, old_cflag);
+
+ /* set baud rate */
+ baud = tty_get_baud_rate(tty);
+ if (baud != tty_termios_baud_rate(old_termios)) {
+ arg = -1;
+
+ /* reassert DTR and (maybe) RTS on transition from B0 */
+ if ((old_cflag & CBAUD) == B0) {
+ /* don't set RTS if using hardware flow control */
+ /* and throttling input */
+ modem_signals = TIOCM_DTR;
+ if (!C_CRTSCTS(tty) || !tty_throttled(tty))
+ modem_signals |= TIOCM_RTS;
+ digi_set_modem_signals(port, modem_signals, 1);
+ }
+ switch (baud) {
+ /* drop DTR and RTS on transition to B0 */
+ case 0: digi_set_modem_signals(port, 0, 1); break;
+ case 50: arg = DIGI_BAUD_50; break;
+ case 75: arg = DIGI_BAUD_75; break;
+ case 110: arg = DIGI_BAUD_110; break;
+ case 150: arg = DIGI_BAUD_150; break;
+ case 200: arg = DIGI_BAUD_200; break;
+ case 300: arg = DIGI_BAUD_300; break;
+ case 600: arg = DIGI_BAUD_600; break;
+ case 1200: arg = DIGI_BAUD_1200; break;
+ case 1800: arg = DIGI_BAUD_1800; break;
+ case 2400: arg = DIGI_BAUD_2400; break;
+ case 4800: arg = DIGI_BAUD_4800; break;
+ case 9600: arg = DIGI_BAUD_9600; break;
+ case 19200: arg = DIGI_BAUD_19200; break;
+ case 38400: arg = DIGI_BAUD_38400; break;
+ case 57600: arg = DIGI_BAUD_57600; break;
+ case 115200: arg = DIGI_BAUD_115200; break;
+ case 230400: arg = DIGI_BAUD_230400; break;
+ case 460800: arg = DIGI_BAUD_460800; break;
+ default:
+ arg = DIGI_BAUD_9600;
+ baud = 9600;
+ break;
+ }
+ if (arg != -1) {
+ buf[i++] = DIGI_CMD_SET_BAUD_RATE;
+ buf[i++] = priv->dp_port_num;
+ buf[i++] = arg;
+ buf[i++] = 0;
+ }
+ }
+ /* set parity */
+ tty->termios.c_cflag &= ~CMSPAR;
+
+ if ((cflag & (PARENB | PARODD)) != (old_cflag & (PARENB | PARODD))) {
+ if (cflag & PARENB) {
+ if (cflag & PARODD)
+ arg = DIGI_PARITY_ODD;
+ else
+ arg = DIGI_PARITY_EVEN;
+ } else {
+ arg = DIGI_PARITY_NONE;
+ }
+ buf[i++] = DIGI_CMD_SET_PARITY;
+ buf[i++] = priv->dp_port_num;
+ buf[i++] = arg;
+ buf[i++] = 0;
+ }
+ /* set word size */
+ if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
+ arg = -1;
+ switch (cflag & CSIZE) {
+ case CS5: arg = DIGI_WORD_SIZE_5; break;
+ case CS6: arg = DIGI_WORD_SIZE_6; break;
+ case CS7: arg = DIGI_WORD_SIZE_7; break;
+ case CS8: arg = DIGI_WORD_SIZE_8; break;
+ default:
+ dev_dbg(dev,
+ "digi_set_termios: can't handle word size %d\n",
+ cflag & CSIZE);
+ break;
+ }
+
+ if (arg != -1) {
+ buf[i++] = DIGI_CMD_SET_WORD_SIZE;
+ buf[i++] = priv->dp_port_num;
+ buf[i++] = arg;
+ buf[i++] = 0;
+ }
+
+ }
+
+ /* set stop bits */
+ if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
+
+ if ((cflag & CSTOPB))
+ arg = DIGI_STOP_BITS_2;
+ else
+ arg = DIGI_STOP_BITS_1;
+
+ buf[i++] = DIGI_CMD_SET_STOP_BITS;
+ buf[i++] = priv->dp_port_num;
+ buf[i++] = arg;
+ buf[i++] = 0;
+
+ }
+
+ /* set input flow control */
+ if ((iflag & IXOFF) != (old_iflag & IXOFF) ||
+ (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
+ arg = 0;
+ if (iflag & IXOFF)
+ arg |= DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
+ else
+ arg &= ~DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
+
+ if (cflag & CRTSCTS) {
+ arg |= DIGI_INPUT_FLOW_CONTROL_RTS;
+
+ /* On USB-4 it is necessary to assert RTS prior */
+ /* to selecting RTS input flow control. */
+ buf[i++] = DIGI_CMD_SET_RTS_SIGNAL;
+ buf[i++] = priv->dp_port_num;
+ buf[i++] = DIGI_RTS_ACTIVE;
+ buf[i++] = 0;
+
+ } else {
+ arg &= ~DIGI_INPUT_FLOW_CONTROL_RTS;
+ }
+ buf[i++] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
+ buf[i++] = priv->dp_port_num;
+ buf[i++] = arg;
+ buf[i++] = 0;
+ }
+
+ /* set output flow control */
+ if ((iflag & IXON) != (old_iflag & IXON) ||
+ (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
+ arg = 0;
+ if (iflag & IXON)
+ arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
+ else
+ arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
+
+ if (cflag & CRTSCTS)
+ arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS;
+ else
+ arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS;
+
+ buf[i++] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
+ buf[i++] = priv->dp_port_num;
+ buf[i++] = arg;
+ buf[i++] = 0;
+ }
+
+ /* set receive enable/disable */
+ if ((cflag & CREAD) != (old_cflag & CREAD)) {
+ if (cflag & CREAD)
+ arg = DIGI_ENABLE;
+ else
+ arg = DIGI_DISABLE;
+
+ buf[i++] = DIGI_CMD_RECEIVE_ENABLE;
+ buf[i++] = priv->dp_port_num;
+ buf[i++] = arg;
+ buf[i++] = 0;
+ }
+ ret = digi_write_oob_command(port, buf, i, 1);
+ if (ret != 0)
+ dev_dbg(dev, "digi_set_termios: write oob failed, ret=%d\n", ret);
+ tty_encode_baud_rate(tty, baud, baud);
+}
+
+
+static void digi_break_ctl(struct tty_struct *tty, int break_state)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ unsigned char buf[4];
+
+ buf[0] = DIGI_CMD_BREAK_CONTROL;
+ buf[1] = 2; /* length */
+ buf[2] = break_state ? 1 : 0;
+ buf[3] = 0; /* pad */
+ digi_write_inb_command(port, buf, 4, 0);
+}
+
+
+static int digi_tiocmget(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct digi_port *priv = usb_get_serial_port_data(port);
+ unsigned int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+ val = priv->dp_modem_signals;
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+ return val;
+}
+
+
+static int digi_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct digi_port *priv = usb_get_serial_port_data(port);
+ unsigned int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+ val = (priv->dp_modem_signals & ~clear) | set;
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+ return digi_set_modem_signals(port, val, 1);
+}
+
+
+static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count)
+{
+
+ int ret, data_len, new_len;
+ struct digi_port *priv = usb_get_serial_port_data(port);
+ unsigned char *data = port->write_urb->transfer_buffer;
+ unsigned long flags;
+
+ dev_dbg(&port->dev, "digi_write: TOP: port=%d, count=%d\n",
+ priv->dp_port_num, count);
+
+ /* copy user data (which can sleep) before getting spin lock */
+ count = min(count, port->bulk_out_size-2);
+ count = min(64, count);
+
+ /* be sure only one write proceeds at a time */
+ /* there are races on the port private buffer */
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+
+ /* wait for urb status clear to submit another urb */
+ if (priv->dp_write_urb_in_use) {
+ /* buffer data if count is 1 (probably put_char) if possible */
+ if (count == 1 && priv->dp_out_buf_len < DIGI_OUT_BUF_SIZE) {
+ priv->dp_out_buf[priv->dp_out_buf_len++] = *buf;
+ new_len = 1;
+ } else {
+ new_len = 0;
+ }
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+ return new_len;
+ }
+
+ /* allow space for any buffered data and for new data, up to */
+ /* transfer buffer size - 2 (for command and length bytes) */
+ new_len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
+ data_len = new_len + priv->dp_out_buf_len;
+
+ if (data_len == 0) {
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+ return 0;
+ }
+
+ port->write_urb->transfer_buffer_length = data_len+2;
+
+ *data++ = DIGI_CMD_SEND_DATA;
+ *data++ = data_len;
+
+ /* copy in buffered data first */
+ memcpy(data, priv->dp_out_buf, priv->dp_out_buf_len);
+ data += priv->dp_out_buf_len;
+
+ /* copy in new data */
+ memcpy(data, buf, new_len);
+
+ ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+ if (ret == 0) {
+ priv->dp_write_urb_in_use = 1;
+ ret = new_len;
+ priv->dp_out_buf_len = 0;
+ }
+
+ /* return length of new data written, or error */
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+ if (ret < 0)
+ dev_err_console(port,
+ "%s: usb_submit_urb failed, ret=%d, port=%d\n",
+ __func__, ret, priv->dp_port_num);
+ dev_dbg(&port->dev, "digi_write: returning %d\n", ret);
+ return ret;
+
+}
+
+static void digi_write_bulk_callback(struct urb *urb)
+{
+
+ struct usb_serial_port *port = urb->context;
+ struct usb_serial *serial;
+ struct digi_port *priv;
+ struct digi_serial *serial_priv;
+ unsigned long flags;
+ int ret = 0;
+ int status = urb->status;
+ bool wakeup;
+
+ /* port and serial sanity check */
+ if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
+ pr_err("%s: port or port->private is NULL, status=%d\n",
+ __func__, status);
+ return;
+ }
+ serial = port->serial;
+ if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) {
+ dev_err(&port->dev,
+ "%s: serial or serial->private is NULL, status=%d\n",
+ __func__, status);
+ return;
+ }
+
+ /* handle oob callback */
+ if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
+ dev_dbg(&port->dev, "digi_write_bulk_callback: oob callback\n");
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+ priv->dp_write_urb_in_use = 0;
+ wake_up_interruptible(&priv->write_wait);
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+ return;
+ }
+
+ /* try to send any buffered data on this port */
+ wakeup = true;
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+ priv->dp_write_urb_in_use = 0;
+ if (priv->dp_out_buf_len > 0) {
+ *((unsigned char *)(port->write_urb->transfer_buffer))
+ = (unsigned char)DIGI_CMD_SEND_DATA;
+ *((unsigned char *)(port->write_urb->transfer_buffer) + 1)
+ = (unsigned char)priv->dp_out_buf_len;
+ port->write_urb->transfer_buffer_length =
+ priv->dp_out_buf_len + 2;
+ memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf,
+ priv->dp_out_buf_len);
+ ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+ if (ret == 0) {
+ priv->dp_write_urb_in_use = 1;
+ priv->dp_out_buf_len = 0;
+ wakeup = false;
+ }
+ }
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
+ if (ret && ret != -EPERM)
+ dev_err_console(port,
+ "%s: usb_submit_urb failed, ret=%d, port=%d\n",
+ __func__, ret, priv->dp_port_num);
+
+ if (wakeup)
+ tty_port_tty_wakeup(&port->port);
+}
+
+static unsigned int digi_write_room(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct digi_port *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ unsigned int room;
+
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+
+ if (priv->dp_write_urb_in_use)
+ room = 0;
+ else
+ room = port->bulk_out_size - 2 - priv->dp_out_buf_len;
+
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+ dev_dbg(&port->dev, "digi_write_room: port=%d, room=%u\n", priv->dp_port_num, room);
+ return room;
+
+}
+
+static unsigned int digi_chars_in_buffer(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct digi_port *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ unsigned int chars;
+
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+ if (priv->dp_write_urb_in_use)
+ chars = port->bulk_out_size - 2;
+ else
+ chars = priv->dp_out_buf_len;
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
+ dev_dbg(&port->dev, "%s: port=%d, chars=%d\n", __func__,
+ priv->dp_port_num, chars);
+ return chars;
+}
+
+static void digi_dtr_rts(struct usb_serial_port *port, int on)
+{
+ /* Adjust DTR and RTS */
+ digi_set_modem_signals(port, on * (TIOCM_DTR | TIOCM_RTS), 1);
+}
+
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+ int ret;
+ unsigned char buf[32];
+ struct digi_port *priv = usb_get_serial_port_data(port);
+ struct ktermios not_termios;
+
+ /* be sure the device is started up */
+ if (digi_startup_device(port->serial) != 0)
+ return -ENXIO;
+
+ /* read modem signals automatically whenever they change */
+ buf[0] = DIGI_CMD_READ_INPUT_SIGNALS;
+ buf[1] = priv->dp_port_num;
+ buf[2] = DIGI_ENABLE;
+ buf[3] = 0;
+
+ /* flush fifos */
+ buf[4] = DIGI_CMD_IFLUSH_FIFO;
+ buf[5] = priv->dp_port_num;
+ buf[6] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
+ buf[7] = 0;
+
+ ret = digi_write_oob_command(port, buf, 8, 1);
+ if (ret != 0)
+ dev_dbg(&port->dev, "digi_open: write oob failed, ret=%d\n", ret);
+
+ /* set termios settings */
+ if (tty) {
+ not_termios.c_cflag = ~tty->termios.c_cflag;
+ not_termios.c_iflag = ~tty->termios.c_iflag;
+ digi_set_termios(tty, port, &not_termios);
+ }
+ return 0;
+}
+
+
+static void digi_close(struct usb_serial_port *port)
+{
+ DEFINE_WAIT(wait);
+ int ret;
+ unsigned char buf[32];
+ struct digi_port *priv = usb_get_serial_port_data(port);
+
+ mutex_lock(&port->serial->disc_mutex);
+ /* if disconnected, just clear flags */
+ if (port->serial->disconnected)
+ goto exit;
+
+ /* FIXME: Transmit idle belongs in the wait_unti_sent path */
+ digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
+
+ /* disable input flow control */
+ buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
+ buf[1] = priv->dp_port_num;
+ buf[2] = DIGI_DISABLE;
+ buf[3] = 0;
+
+ /* disable output flow control */
+ buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
+ buf[5] = priv->dp_port_num;
+ buf[6] = DIGI_DISABLE;
+ buf[7] = 0;
+
+ /* disable reading modem signals automatically */
+ buf[8] = DIGI_CMD_READ_INPUT_SIGNALS;
+ buf[9] = priv->dp_port_num;
+ buf[10] = DIGI_DISABLE;
+ buf[11] = 0;
+
+ /* disable receive */
+ buf[12] = DIGI_CMD_RECEIVE_ENABLE;
+ buf[13] = priv->dp_port_num;
+ buf[14] = DIGI_DISABLE;
+ buf[15] = 0;
+
+ /* flush fifos */
+ buf[16] = DIGI_CMD_IFLUSH_FIFO;
+ buf[17] = priv->dp_port_num;
+ buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
+ buf[19] = 0;
+
+ ret = digi_write_oob_command(port, buf, 20, 0);
+ if (ret != 0)
+ dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n",
+ ret);
+ /* wait for final commands on oob port to complete */
+ prepare_to_wait(&priv->dp_flush_wait, &wait,
+ TASK_INTERRUPTIBLE);
+ schedule_timeout(DIGI_CLOSE_TIMEOUT);
+ finish_wait(&priv->dp_flush_wait, &wait);
+
+ /* shutdown any outstanding bulk writes */
+ usb_kill_urb(port->write_urb);
+exit:
+ spin_lock_irq(&priv->dp_port_lock);
+ priv->dp_write_urb_in_use = 0;
+ wake_up_interruptible(&priv->dp_close_wait);
+ spin_unlock_irq(&priv->dp_port_lock);
+ mutex_unlock(&port->serial->disc_mutex);
+}
+
+
+/*
+ * Digi Startup Device
+ *
+ * Starts reads on all ports. Must be called AFTER startup, with
+ * urbs initialized. Returns 0 if successful, non-zero error otherwise.
+ */
+
+static int digi_startup_device(struct usb_serial *serial)
+{
+ int i, ret = 0;
+ struct digi_serial *serial_priv = usb_get_serial_data(serial);
+ struct usb_serial_port *port;
+
+ /* be sure this happens exactly once */
+ spin_lock(&serial_priv->ds_serial_lock);
+ if (serial_priv->ds_device_started) {
+ spin_unlock(&serial_priv->ds_serial_lock);
+ return 0;
+ }
+ serial_priv->ds_device_started = 1;
+ spin_unlock(&serial_priv->ds_serial_lock);
+
+ /* start reading from each bulk in endpoint for the device */
+ /* set USB_DISABLE_SPD flag for write bulk urbs */
+ for (i = 0; i < serial->type->num_ports + 1; i++) {
+ port = serial->port[i];
+ ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
+ if (ret != 0) {
+ dev_err(&port->dev,
+ "%s: usb_submit_urb failed, ret=%d, port=%d\n",
+ __func__, ret, i);
+ break;
+ }
+ }
+ return ret;
+}
+
+static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
+{
+ struct digi_port *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->dp_port_lock);
+ priv->dp_port_num = port_num;
+ init_waitqueue_head(&priv->dp_transmit_idle_wait);
+ init_waitqueue_head(&priv->dp_flush_wait);
+ init_waitqueue_head(&priv->dp_close_wait);
+ init_waitqueue_head(&priv->write_wait);
+ priv->dp_port = port;
+
+ usb_set_serial_port_data(port, priv);
+
+ return 0;
+}
+
+static int digi_startup(struct usb_serial *serial)
+{
+ struct digi_serial *serial_priv;
+ int ret;
+
+ serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
+ if (!serial_priv)
+ return -ENOMEM;
+
+ spin_lock_init(&serial_priv->ds_serial_lock);
+ serial_priv->ds_oob_port_num = serial->type->num_ports;
+ serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num];
+
+ ret = digi_port_init(serial_priv->ds_oob_port,
+ serial_priv->ds_oob_port_num);
+ if (ret) {
+ kfree(serial_priv);
+ return ret;
+ }
+
+ usb_set_serial_data(serial, serial_priv);
+
+ return 0;
+}
+
+
+static void digi_disconnect(struct usb_serial *serial)
+{
+ int i;
+
+ /* stop reads and writes on all ports */
+ for (i = 0; i < serial->type->num_ports + 1; i++) {
+ usb_kill_urb(serial->port[i]->read_urb);
+ usb_kill_urb(serial->port[i]->write_urb);
+ }
+}
+
+
+static void digi_release(struct usb_serial *serial)
+{
+ struct digi_serial *serial_priv;
+ struct digi_port *priv;
+
+ serial_priv = usb_get_serial_data(serial);
+
+ priv = usb_get_serial_port_data(serial_priv->ds_oob_port);
+ kfree(priv);
+
+ kfree(serial_priv);
+}
+
+static int digi_port_probe(struct usb_serial_port *port)
+{
+ return digi_port_init(port, port->port_number);
+}
+
+static void digi_port_remove(struct usb_serial_port *port)
+{
+ struct digi_port *priv;
+
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+}
+
+static void digi_read_bulk_callback(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+ struct digi_port *priv;
+ struct digi_serial *serial_priv;
+ int ret;
+ int status = urb->status;
+
+ /* port sanity check, do not resubmit if port is not valid */
+ if (port == NULL)
+ return;
+ priv = usb_get_serial_port_data(port);
+ if (priv == NULL) {
+ dev_err(&port->dev, "%s: port->private is NULL, status=%d\n",
+ __func__, status);
+ return;
+ }
+ if (port->serial == NULL ||
+ (serial_priv = usb_get_serial_data(port->serial)) == NULL) {
+ dev_err(&port->dev, "%s: serial is bad or serial->private "
+ "is NULL, status=%d\n", __func__, status);
+ return;
+ }
+
+ /* do not resubmit urb if it has any status error */
+ if (status) {
+ dev_err(&port->dev,
+ "%s: nonzero read bulk status: status=%d, port=%d\n",
+ __func__, status, priv->dp_port_num);
+ return;
+ }
+
+ /* handle oob or inb callback, do not resubmit if error */
+ if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
+ if (digi_read_oob_callback(urb) != 0)
+ return;
+ } else {
+ if (digi_read_inb_callback(urb) != 0)
+ return;
+ }
+
+ /* continue read */
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret != 0 && ret != -EPERM) {
+ dev_err(&port->dev,
+ "%s: failed resubmitting urb, ret=%d, port=%d\n",
+ __func__, ret, priv->dp_port_num);
+ }
+
+}
+
+/*
+ * Digi Read INB Callback
+ *
+ * Digi Read INB Callback handles reads on the in band ports, sending
+ * the data on to the tty subsystem. When called we know port and
+ * port->private are not NULL and port->serial has been validated.
+ * It returns 0 if successful, 1 if successful but the port is
+ * throttled, and -1 if the sanity checks failed.
+ */
+
+static int digi_read_inb_callback(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+ struct digi_port *priv = usb_get_serial_port_data(port);
+ unsigned char *buf = urb->transfer_buffer;
+ unsigned long flags;
+ int opcode;
+ int len;
+ int port_status;
+ unsigned char *data;
+ int tty_flag, throttled;
+
+ /* short/multiple packet check */
+ if (urb->actual_length < 2) {
+ dev_warn(&port->dev, "short packet received\n");
+ return -1;
+ }
+
+ opcode = buf[0];
+ len = buf[1];
+
+ if (urb->actual_length != len + 2) {
+ dev_err(&port->dev, "malformed packet received: port=%d, opcode=%d, len=%d, actual_length=%u\n",
+ priv->dp_port_num, opcode, len, urb->actual_length);
+ return -1;
+ }
+
+ if (opcode == DIGI_CMD_RECEIVE_DATA && len < 1) {
+ dev_err(&port->dev, "malformed data packet received\n");
+ return -1;
+ }
+
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+
+ /* check for throttle; if set, do not resubmit read urb */
+ /* indicate the read chain needs to be restarted on unthrottle */
+ throttled = priv->dp_throttled;
+ if (throttled)
+ priv->dp_throttle_restart = 1;
+
+ /* receive data */
+ if (opcode == DIGI_CMD_RECEIVE_DATA) {
+ port_status = buf[2];
+ data = &buf[3];
+
+ /* get flag from port_status */
+ tty_flag = 0;
+
+ /* overrun is special, not associated with a char */
+ if (port_status & DIGI_OVERRUN_ERROR)
+ tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
+
+ /* break takes precedence over parity, */
+ /* which takes precedence over framing errors */
+ if (port_status & DIGI_BREAK_ERROR)
+ tty_flag = TTY_BREAK;
+ else if (port_status & DIGI_PARITY_ERROR)
+ tty_flag = TTY_PARITY;
+ else if (port_status & DIGI_FRAMING_ERROR)
+ tty_flag = TTY_FRAME;
+
+ /* data length is len-1 (one byte of len is port_status) */
+ --len;
+ if (len > 0) {
+ tty_insert_flip_string_fixed_flag(&port->port, data,
+ tty_flag, len);
+ tty_flip_buffer_push(&port->port);
+ }
+ }
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
+ if (opcode == DIGI_CMD_RECEIVE_DISABLE)
+ dev_dbg(&port->dev, "%s: got RECEIVE_DISABLE\n", __func__);
+ else if (opcode != DIGI_CMD_RECEIVE_DATA)
+ dev_dbg(&port->dev, "%s: unknown opcode: %d\n", __func__, opcode);
+
+ return throttled ? 1 : 0;
+
+}
+
+
+/*
+ * Digi Read OOB Callback
+ *
+ * Digi Read OOB Callback handles reads on the out of band port.
+ * When called we know port and port->private are not NULL and
+ * the port->serial is valid. It returns 0 if successful, and
+ * -1 if the sanity checks failed.
+ */
+
+static int digi_read_oob_callback(struct urb *urb)
+{
+
+ struct usb_serial_port *port = urb->context;
+ struct usb_serial *serial = port->serial;
+ struct tty_struct *tty;
+ struct digi_port *priv;
+ unsigned char *buf = urb->transfer_buffer;
+ int opcode, line, status, val;
+ unsigned long flags;
+ int i;
+ unsigned int rts;
+
+ if (urb->actual_length < 4)
+ return -1;
+
+ /* handle each oob command */
+ for (i = 0; i < urb->actual_length - 3; i += 4) {
+ opcode = buf[i];
+ line = buf[i + 1];
+ status = buf[i + 2];
+ val = buf[i + 3];
+
+ dev_dbg(&port->dev, "digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d\n",
+ opcode, line, status, val);
+
+ if (status != 0 || line >= serial->type->num_ports)
+ continue;
+
+ port = serial->port[line];
+
+ priv = usb_get_serial_port_data(port);
+ if (priv == NULL)
+ return -1;
+
+ tty = tty_port_tty_get(&port->port);
+
+ rts = 0;
+ if (tty)
+ rts = C_CRTSCTS(tty);
+
+ if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
+ bool wakeup = false;
+
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+ /* convert from digi flags to termiox flags */
+ if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
+ priv->dp_modem_signals |= TIOCM_CTS;
+ if (rts)
+ wakeup = true;
+ } else {
+ priv->dp_modem_signals &= ~TIOCM_CTS;
+ /* port must be open to use tty struct */
+ }
+ if (val & DIGI_READ_INPUT_SIGNALS_DSR)
+ priv->dp_modem_signals |= TIOCM_DSR;
+ else
+ priv->dp_modem_signals &= ~TIOCM_DSR;
+ if (val & DIGI_READ_INPUT_SIGNALS_RI)
+ priv->dp_modem_signals |= TIOCM_RI;
+ else
+ priv->dp_modem_signals &= ~TIOCM_RI;
+ if (val & DIGI_READ_INPUT_SIGNALS_DCD)
+ priv->dp_modem_signals |= TIOCM_CD;
+ else
+ priv->dp_modem_signals &= ~TIOCM_CD;
+
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
+ if (wakeup)
+ tty_port_tty_wakeup(&port->port);
+ } else if (opcode == DIGI_CMD_TRANSMIT_IDLE) {
+ spin_lock_irqsave(&priv->dp_port_lock, flags);
+ priv->dp_transmit_idle = 1;
+ wake_up_interruptible(&priv->dp_transmit_idle_wait);
+ spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+ } else if (opcode == DIGI_CMD_IFLUSH_FIFO) {
+ wake_up_interruptible(&priv->dp_flush_wait);
+ }
+ tty_kref_put(tty);
+ }
+ return 0;
+
+}
+
+module_usb_serial_driver(serial_drivers, id_table_combined);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");