diff options
Diffstat (limited to '')
-rw-r--r-- | drivers/usb/typec/tcpm/fusb302.c | 1848 |
1 files changed, 1848 insertions, 0 deletions
diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c new file mode 100644 index 000000000..721b2a548 --- /dev/null +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -0,0 +1,1848 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2016-2017 Google, Inc + * + * Fairchild FUSB302 Type-C Chip Driver + */ + +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/extcon.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_device.h> +#include <linux/pinctrl/consumer.h> +#include <linux/proc_fs.h> +#include <linux/regulator/consumer.h> +#include <linux/sched/clock.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/usb.h> +#include <linux/usb/typec.h> +#include <linux/usb/tcpm.h> +#include <linux/usb/pd.h> +#include <linux/workqueue.h> + +#include "fusb302_reg.h" + +/* + * When the device is SNK, BC_LVL interrupt is used to monitor cc pins + * for the current capability offered by the SRC. As FUSB302 chip fires + * the BC_LVL interrupt on PD signalings, cc lvl should be handled after + * a delay to avoid measuring on PD activities. The delay is slightly + * longer than PD_T_PD_DEBPUNCE (10-20ms). + */ +#define T_BC_LVL_DEBOUNCE_DELAY_MS 30 + +enum toggling_mode { + TOGGLING_MODE_OFF, + TOGGLING_MODE_DRP, + TOGGLING_MODE_SNK, + TOGGLING_MODE_SRC, +}; + +enum src_current_status { + SRC_CURRENT_DEFAULT, + SRC_CURRENT_MEDIUM, + SRC_CURRENT_HIGH, +}; + +static const u8 ra_mda_value[] = { + [SRC_CURRENT_DEFAULT] = 4, /* 210mV */ + [SRC_CURRENT_MEDIUM] = 9, /* 420mV */ + [SRC_CURRENT_HIGH] = 18, /* 798mV */ +}; + +static const u8 rd_mda_value[] = { + [SRC_CURRENT_DEFAULT] = 38, /* 1638mV */ + [SRC_CURRENT_MEDIUM] = 38, /* 1638mV */ + [SRC_CURRENT_HIGH] = 61, /* 2604mV */ +}; + +#define LOG_BUFFER_ENTRIES 1024 +#define LOG_BUFFER_ENTRY_SIZE 128 + +struct fusb302_chip { + struct device *dev; + struct i2c_client *i2c_client; + struct tcpm_port *tcpm_port; + struct tcpc_dev tcpc_dev; + + struct regulator *vbus; + + spinlock_t irq_lock; + struct work_struct irq_work; + bool irq_suspended; + bool irq_while_suspended; + struct gpio_desc *gpio_int_n; + int gpio_int_n_irq; + struct extcon_dev *extcon; + + struct workqueue_struct *wq; + struct delayed_work bc_lvl_handler; + + /* lock for sharing chip states */ + struct mutex lock; + + /* chip status */ + enum toggling_mode toggling_mode; + enum src_current_status src_current_status; + bool intr_togdone; + bool intr_bc_lvl; + bool intr_comp_chng; + + /* port status */ + bool vconn_on; + bool vbus_on; + bool charge_on; + bool vbus_present; + enum typec_cc_polarity cc_polarity; + enum typec_cc_status cc1; + enum typec_cc_status cc2; + u32 snk_pdo[PDO_MAX_OBJECTS]; + +#ifdef CONFIG_DEBUG_FS + struct dentry *dentry; + /* lock for log buffer access */ + struct mutex logbuffer_lock; + int logbuffer_head; + int logbuffer_tail; + u8 *logbuffer[LOG_BUFFER_ENTRIES]; +#endif +}; + +/* + * Logging + */ + +#ifdef CONFIG_DEBUG_FS +static bool fusb302_log_full(struct fusb302_chip *chip) +{ + return chip->logbuffer_tail == + (chip->logbuffer_head + 1) % LOG_BUFFER_ENTRIES; +} + +__printf(2, 0) +static void _fusb302_log(struct fusb302_chip *chip, const char *fmt, + va_list args) +{ + char tmpbuffer[LOG_BUFFER_ENTRY_SIZE]; + u64 ts_nsec = local_clock(); + unsigned long rem_nsec; + + if (!chip->logbuffer[chip->logbuffer_head]) { + chip->logbuffer[chip->logbuffer_head] = + kzalloc(LOG_BUFFER_ENTRY_SIZE, GFP_KERNEL); + if (!chip->logbuffer[chip->logbuffer_head]) + return; + } + + vsnprintf(tmpbuffer, sizeof(tmpbuffer), fmt, args); + + mutex_lock(&chip->logbuffer_lock); + + if (fusb302_log_full(chip)) { + chip->logbuffer_head = max(chip->logbuffer_head - 1, 0); + strscpy(tmpbuffer, "overflow", sizeof(tmpbuffer)); + } + + if (chip->logbuffer_head < 0 || + chip->logbuffer_head >= LOG_BUFFER_ENTRIES) { + dev_warn(chip->dev, + "Bad log buffer index %d\n", chip->logbuffer_head); + goto abort; + } + + if (!chip->logbuffer[chip->logbuffer_head]) { + dev_warn(chip->dev, + "Log buffer index %d is NULL\n", chip->logbuffer_head); + goto abort; + } + + rem_nsec = do_div(ts_nsec, 1000000000); + scnprintf(chip->logbuffer[chip->logbuffer_head], + LOG_BUFFER_ENTRY_SIZE, "[%5lu.%06lu] %s", + (unsigned long)ts_nsec, rem_nsec / 1000, + tmpbuffer); + chip->logbuffer_head = (chip->logbuffer_head + 1) % LOG_BUFFER_ENTRIES; + +abort: + mutex_unlock(&chip->logbuffer_lock); +} + +__printf(2, 3) +static void fusb302_log(struct fusb302_chip *chip, const char *fmt, ...) +{ + va_list args; + + va_start(args, fmt); + _fusb302_log(chip, fmt, args); + va_end(args); +} + +static int fusb302_debug_show(struct seq_file *s, void *v) +{ + struct fusb302_chip *chip = (struct fusb302_chip *)s->private; + int tail; + + mutex_lock(&chip->logbuffer_lock); + tail = chip->logbuffer_tail; + while (tail != chip->logbuffer_head) { + seq_printf(s, "%s\n", chip->logbuffer[tail]); + tail = (tail + 1) % LOG_BUFFER_ENTRIES; + } + if (!seq_has_overflowed(s)) + chip->logbuffer_tail = tail; + mutex_unlock(&chip->logbuffer_lock); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(fusb302_debug); + +static void fusb302_debugfs_init(struct fusb302_chip *chip) +{ + char name[NAME_MAX]; + + mutex_init(&chip->logbuffer_lock); + snprintf(name, NAME_MAX, "fusb302-%s", dev_name(chip->dev)); + chip->dentry = debugfs_create_dir(name, usb_debug_root); + debugfs_create_file("log", S_IFREG | 0444, chip->dentry, chip, + &fusb302_debug_fops); +} + +static void fusb302_debugfs_exit(struct fusb302_chip *chip) +{ + debugfs_remove(chip->dentry); +} + +#else + +static void fusb302_log(const struct fusb302_chip *chip, + const char *fmt, ...) { } +static void fusb302_debugfs_init(const struct fusb302_chip *chip) { } +static void fusb302_debugfs_exit(const struct fusb302_chip *chip) { } + +#endif + +static int fusb302_i2c_write(struct fusb302_chip *chip, + u8 address, u8 data) +{ + int ret = 0; + + ret = i2c_smbus_write_byte_data(chip->i2c_client, address, data); + if (ret < 0) + fusb302_log(chip, "cannot write 0x%02x to 0x%02x, ret=%d", + data, address, ret); + + return ret; +} + +static int fusb302_i2c_block_write(struct fusb302_chip *chip, u8 address, + u8 length, const u8 *data) +{ + int ret = 0; + + if (length <= 0) + return ret; + + ret = i2c_smbus_write_i2c_block_data(chip->i2c_client, address, + length, data); + if (ret < 0) + fusb302_log(chip, "cannot block write 0x%02x, len=%d, ret=%d", + address, length, ret); + + return ret; +} + +static int fusb302_i2c_read(struct fusb302_chip *chip, + u8 address, u8 *data) +{ + int ret = 0; + + ret = i2c_smbus_read_byte_data(chip->i2c_client, address); + *data = (u8)ret; + if (ret < 0) + fusb302_log(chip, "cannot read %02x, ret=%d", address, ret); + + return ret; +} + +static int fusb302_i2c_block_read(struct fusb302_chip *chip, u8 address, + u8 length, u8 *data) +{ + int ret = 0; + + if (length <= 0) + return ret; + + ret = i2c_smbus_read_i2c_block_data(chip->i2c_client, address, + length, data); + if (ret < 0) { + fusb302_log(chip, "cannot block read 0x%02x, len=%d, ret=%d", + address, length, ret); + goto done; + } + if (ret != length) { + fusb302_log(chip, "only read %d/%d bytes from 0x%02x", + ret, length, address); + ret = -EIO; + } + +done: + return ret; +} + +static int fusb302_i2c_mask_write(struct fusb302_chip *chip, u8 address, + u8 mask, u8 value) +{ + int ret = 0; + u8 data; + + ret = fusb302_i2c_read(chip, address, &data); + if (ret < 0) + return ret; + data &= ~mask; + data |= value; + ret = fusb302_i2c_write(chip, address, data); + if (ret < 0) + return ret; + + return ret; +} + +static int fusb302_i2c_set_bits(struct fusb302_chip *chip, u8 address, + u8 set_bits) +{ + return fusb302_i2c_mask_write(chip, address, 0x00, set_bits); +} + +static int fusb302_i2c_clear_bits(struct fusb302_chip *chip, u8 address, + u8 clear_bits) +{ + return fusb302_i2c_mask_write(chip, address, clear_bits, 0x00); +} + +static int fusb302_sw_reset(struct fusb302_chip *chip) +{ + int ret = 0; + + ret = fusb302_i2c_write(chip, FUSB_REG_RESET, + FUSB_REG_RESET_SW_RESET); + if (ret < 0) + fusb302_log(chip, "cannot sw reset the chip, ret=%d", ret); + else + fusb302_log(chip, "sw reset"); + + return ret; +} + +static int fusb302_enable_tx_auto_retries(struct fusb302_chip *chip, u8 retry_count) +{ + int ret = 0; + + ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3, retry_count | + FUSB_REG_CONTROL3_AUTO_RETRY); + + return ret; +} + +/* + * initialize interrupt on the chip + * - unmasked interrupt: VBUS_OK + */ +static int fusb302_init_interrupt(struct fusb302_chip *chip) +{ + int ret = 0; + + ret = fusb302_i2c_write(chip, FUSB_REG_MASK, + 0xFF & ~FUSB_REG_MASK_VBUSOK); + if (ret < 0) + return ret; + ret = fusb302_i2c_write(chip, FUSB_REG_MASKA, 0xFF); + if (ret < 0) + return ret; + ret = fusb302_i2c_write(chip, FUSB_REG_MASKB, 0xFF); + if (ret < 0) + return ret; + ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL0, + FUSB_REG_CONTROL0_INT_MASK); + if (ret < 0) + return ret; + + return ret; +} + +static int fusb302_set_power_mode(struct fusb302_chip *chip, u8 power_mode) +{ + int ret = 0; + + ret = fusb302_i2c_write(chip, FUSB_REG_POWER, power_mode); + + return ret; +} + +static int tcpm_init(struct tcpc_dev *dev) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + u8 data; + + ret = fusb302_sw_reset(chip); + if (ret < 0) + return ret; + ret = fusb302_enable_tx_auto_retries(chip, FUSB_REG_CONTROL3_N_RETRIES_3); + if (ret < 0) + return ret; + ret = fusb302_init_interrupt(chip); + if (ret < 0) + return ret; + ret = fusb302_set_power_mode(chip, FUSB_REG_POWER_PWR_ALL); + if (ret < 0) + return ret; + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &data); + if (ret < 0) + return ret; + chip->vbus_present = !!(data & FUSB_REG_STATUS0_VBUSOK); + ret = fusb302_i2c_read(chip, FUSB_REG_DEVICE_ID, &data); + if (ret < 0) + return ret; + fusb302_log(chip, "fusb302 device ID: 0x%02x", data); + + return ret; +} + +static int tcpm_get_vbus(struct tcpc_dev *dev) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + + mutex_lock(&chip->lock); + ret = chip->vbus_present ? 1 : 0; + mutex_unlock(&chip->lock); + + return ret; +} + +static int tcpm_get_current_limit(struct tcpc_dev *dev) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int current_limit = 0; + unsigned long timeout; + + if (!chip->extcon) + return 0; + + /* + * USB2 Charger detection may still be in progress when we get here, + * this can take upto 600ms, wait 800ms max. + */ + timeout = jiffies + msecs_to_jiffies(800); + do { + if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_SDP) == 1) + current_limit = 500; + + if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_CDP) == 1 || + extcon_get_state(chip->extcon, EXTCON_CHG_USB_ACA) == 1) + current_limit = 1500; + + if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_DCP) == 1) + current_limit = 2000; + + msleep(50); + } while (current_limit == 0 && time_before(jiffies, timeout)); + + return current_limit; +} + +static int fusb302_set_src_current(struct fusb302_chip *chip, + enum src_current_status status) +{ + int ret = 0; + + chip->src_current_status = status; + switch (status) { + case SRC_CURRENT_DEFAULT: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0, + FUSB_REG_CONTROL0_HOST_CUR_MASK, + FUSB_REG_CONTROL0_HOST_CUR_DEF); + break; + case SRC_CURRENT_MEDIUM: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0, + FUSB_REG_CONTROL0_HOST_CUR_MASK, + FUSB_REG_CONTROL0_HOST_CUR_MED); + break; + case SRC_CURRENT_HIGH: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0, + FUSB_REG_CONTROL0_HOST_CUR_MASK, + FUSB_REG_CONTROL0_HOST_CUR_HIGH); + break; + default: + break; + } + + return ret; +} + +static int fusb302_set_toggling(struct fusb302_chip *chip, + enum toggling_mode mode) +{ + int ret = 0; + + /* first disable toggling */ + ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_TOGGLE); + if (ret < 0) + return ret; + /* mask interrupts for SRC or SNK */ + ret = fusb302_i2c_set_bits(chip, FUSB_REG_MASK, + FUSB_REG_MASK_BC_LVL | + FUSB_REG_MASK_COMP_CHNG); + if (ret < 0) + return ret; + chip->intr_bc_lvl = false; + chip->intr_comp_chng = false; + /* configure toggling mode: none/snk/src/drp */ + switch (mode) { + case TOGGLING_MODE_OFF: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_MODE_MASK, + FUSB_REG_CONTROL2_MODE_NONE); + if (ret < 0) + return ret; + break; + case TOGGLING_MODE_SNK: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_MODE_MASK, + FUSB_REG_CONTROL2_MODE_UFP); + if (ret < 0) + return ret; + break; + case TOGGLING_MODE_SRC: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_MODE_MASK, + FUSB_REG_CONTROL2_MODE_DFP); + if (ret < 0) + return ret; + break; + case TOGGLING_MODE_DRP: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_MODE_MASK, + FUSB_REG_CONTROL2_MODE_DRP); + if (ret < 0) + return ret; + break; + default: + break; + } + + if (mode == TOGGLING_MODE_OFF) { + /* mask TOGDONE interrupt */ + ret = fusb302_i2c_set_bits(chip, FUSB_REG_MASKA, + FUSB_REG_MASKA_TOGDONE); + if (ret < 0) + return ret; + chip->intr_togdone = false; + } else { + /* Datasheet says vconn MUST be off when toggling */ + WARN(chip->vconn_on, "Vconn is on during toggle start"); + /* unmask TOGDONE interrupt */ + ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA, + FUSB_REG_MASKA_TOGDONE); + if (ret < 0) + return ret; + chip->intr_togdone = true; + /* start toggling */ + ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_TOGGLE); + if (ret < 0) + return ret; + /* during toggling, consider cc as Open */ + chip->cc1 = TYPEC_CC_OPEN; + chip->cc2 = TYPEC_CC_OPEN; + } + chip->toggling_mode = mode; + + return ret; +} + +static const char * const typec_cc_status_name[] = { + [TYPEC_CC_OPEN] = "Open", + [TYPEC_CC_RA] = "Ra", + [TYPEC_CC_RD] = "Rd", + [TYPEC_CC_RP_DEF] = "Rp-def", + [TYPEC_CC_RP_1_5] = "Rp-1.5", + [TYPEC_CC_RP_3_0] = "Rp-3.0", +}; + +static const enum src_current_status cc_src_current[] = { + [TYPEC_CC_OPEN] = SRC_CURRENT_DEFAULT, + [TYPEC_CC_RA] = SRC_CURRENT_DEFAULT, + [TYPEC_CC_RD] = SRC_CURRENT_DEFAULT, + [TYPEC_CC_RP_DEF] = SRC_CURRENT_DEFAULT, + [TYPEC_CC_RP_1_5] = SRC_CURRENT_MEDIUM, + [TYPEC_CC_RP_3_0] = SRC_CURRENT_HIGH, +}; + +static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + u8 switches0_mask = FUSB_REG_SWITCHES0_CC1_PU_EN | + FUSB_REG_SWITCHES0_CC2_PU_EN | + FUSB_REG_SWITCHES0_CC1_PD_EN | + FUSB_REG_SWITCHES0_CC2_PD_EN; + u8 rd_mda, switches0_data = 0x00; + int ret = 0; + + mutex_lock(&chip->lock); + switch (cc) { + case TYPEC_CC_OPEN: + break; + case TYPEC_CC_RD: + switches0_data |= FUSB_REG_SWITCHES0_CC1_PD_EN | + FUSB_REG_SWITCHES0_CC2_PD_EN; + break; + case TYPEC_CC_RP_DEF: + case TYPEC_CC_RP_1_5: + case TYPEC_CC_RP_3_0: + switches0_data |= (chip->cc_polarity == TYPEC_POLARITY_CC1) ? + FUSB_REG_SWITCHES0_CC1_PU_EN : + FUSB_REG_SWITCHES0_CC2_PU_EN; + break; + default: + fusb302_log(chip, "unsupported cc value %s", + typec_cc_status_name[cc]); + ret = -EINVAL; + goto done; + } + + fusb302_log(chip, "cc := %s", typec_cc_status_name[cc]); + + ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF); + if (ret < 0) { + fusb302_log(chip, "cannot set toggling mode, ret=%d", ret); + goto done; + } + + ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0, + switches0_mask, switches0_data); + if (ret < 0) { + fusb302_log(chip, "cannot set pull-up/-down, ret = %d", ret); + goto done; + } + /* reset the cc status */ + chip->cc1 = TYPEC_CC_OPEN; + chip->cc2 = TYPEC_CC_OPEN; + + /* adjust current for SRC */ + ret = fusb302_set_src_current(chip, cc_src_current[cc]); + if (ret < 0) { + fusb302_log(chip, "cannot set src current %s, ret=%d", + typec_cc_status_name[cc], ret); + goto done; + } + + /* enable/disable interrupts, BC_LVL for SNK and COMP_CHNG for SRC */ + switch (cc) { + case TYPEC_CC_RP_DEF: + case TYPEC_CC_RP_1_5: + case TYPEC_CC_RP_3_0: + rd_mda = rd_mda_value[cc_src_current[cc]]; + ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda); + if (ret < 0) { + fusb302_log(chip, + "cannot set SRC measure value, ret=%d", + ret); + goto done; + } + ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK, + FUSB_REG_MASK_BC_LVL | + FUSB_REG_MASK_COMP_CHNG, + FUSB_REG_MASK_BC_LVL); + if (ret < 0) { + fusb302_log(chip, "cannot set SRC interrupt, ret=%d", + ret); + goto done; + } + chip->intr_comp_chng = true; + chip->intr_bc_lvl = false; + break; + case TYPEC_CC_RD: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK, + FUSB_REG_MASK_BC_LVL | + FUSB_REG_MASK_COMP_CHNG, + FUSB_REG_MASK_COMP_CHNG); + if (ret < 0) { + fusb302_log(chip, "cannot set SRC interrupt, ret=%d", + ret); + goto done; + } + chip->intr_bc_lvl = true; + chip->intr_comp_chng = false; + break; + default: + break; + } +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static int tcpm_get_cc(struct tcpc_dev *dev, enum typec_cc_status *cc1, + enum typec_cc_status *cc2) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + + mutex_lock(&chip->lock); + *cc1 = chip->cc1; + *cc2 = chip->cc2; + fusb302_log(chip, "cc1=%s, cc2=%s", typec_cc_status_name[*cc1], + typec_cc_status_name[*cc2]); + mutex_unlock(&chip->lock); + + return 0; +} + +static int tcpm_set_polarity(struct tcpc_dev *dev, + enum typec_cc_polarity polarity) +{ + return 0; +} + +static int tcpm_set_vconn(struct tcpc_dev *dev, bool on) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + u8 switches0_data = 0x00; + u8 switches0_mask = FUSB_REG_SWITCHES0_VCONN_CC1 | + FUSB_REG_SWITCHES0_VCONN_CC2; + + mutex_lock(&chip->lock); + if (chip->vconn_on == on) { + fusb302_log(chip, "vconn is already %s", on ? "On" : "Off"); + goto done; + } + if (on) { + switches0_data = (chip->cc_polarity == TYPEC_POLARITY_CC1) ? + FUSB_REG_SWITCHES0_VCONN_CC2 : + FUSB_REG_SWITCHES0_VCONN_CC1; + } + ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0, + switches0_mask, switches0_data); + if (ret < 0) + goto done; + chip->vconn_on = on; + fusb302_log(chip, "vconn := %s", on ? "On" : "Off"); +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static int tcpm_set_vbus(struct tcpc_dev *dev, bool on, bool charge) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + + mutex_lock(&chip->lock); + if (chip->vbus_on == on) { + fusb302_log(chip, "vbus is already %s", on ? "On" : "Off"); + } else { + if (on) + ret = regulator_enable(chip->vbus); + else + ret = regulator_disable(chip->vbus); + if (ret < 0) { + fusb302_log(chip, "cannot %s vbus regulator, ret=%d", + on ? "enable" : "disable", ret); + goto done; + } + chip->vbus_on = on; + fusb302_log(chip, "vbus := %s", on ? "On" : "Off"); + } + if (chip->charge_on == charge) + fusb302_log(chip, "charge is already %s", + charge ? "On" : "Off"); + else + chip->charge_on = charge; + +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static int fusb302_pd_tx_flush(struct fusb302_chip *chip) +{ + return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL0, + FUSB_REG_CONTROL0_TX_FLUSH); +} + +static int fusb302_pd_rx_flush(struct fusb302_chip *chip) +{ + return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL1, + FUSB_REG_CONTROL1_RX_FLUSH); +} + +static int fusb302_pd_set_auto_goodcrc(struct fusb302_chip *chip, bool on) +{ + if (on) + return fusb302_i2c_set_bits(chip, FUSB_REG_SWITCHES1, + FUSB_REG_SWITCHES1_AUTO_GCRC); + return fusb302_i2c_clear_bits(chip, FUSB_REG_SWITCHES1, + FUSB_REG_SWITCHES1_AUTO_GCRC); +} + +static int fusb302_pd_set_interrupts(struct fusb302_chip *chip, bool on) +{ + int ret = 0; + u8 mask_interrupts = FUSB_REG_MASK_COLLISION; + u8 maska_interrupts = FUSB_REG_MASKA_RETRYFAIL | + FUSB_REG_MASKA_HARDSENT | + FUSB_REG_MASKA_TX_SUCCESS | + FUSB_REG_MASKA_HARDRESET; + u8 maskb_interrupts = FUSB_REG_MASKB_GCRCSENT; + + ret = on ? + fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, mask_interrupts) : + fusb302_i2c_set_bits(chip, FUSB_REG_MASK, mask_interrupts); + if (ret < 0) + return ret; + ret = on ? + fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA, maska_interrupts) : + fusb302_i2c_set_bits(chip, FUSB_REG_MASKA, maska_interrupts); + if (ret < 0) + return ret; + ret = on ? + fusb302_i2c_clear_bits(chip, FUSB_REG_MASKB, maskb_interrupts) : + fusb302_i2c_set_bits(chip, FUSB_REG_MASKB, maskb_interrupts); + return ret; +} + +static int tcpm_set_pd_rx(struct tcpc_dev *dev, bool on) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + + mutex_lock(&chip->lock); + ret = fusb302_pd_rx_flush(chip); + if (ret < 0) { + fusb302_log(chip, "cannot flush pd rx buffer, ret=%d", ret); + goto done; + } + ret = fusb302_pd_tx_flush(chip); + if (ret < 0) { + fusb302_log(chip, "cannot flush pd tx buffer, ret=%d", ret); + goto done; + } + ret = fusb302_pd_set_auto_goodcrc(chip, on); + if (ret < 0) { + fusb302_log(chip, "cannot turn %s auto GCRC, ret=%d", + on ? "on" : "off", ret); + goto done; + } + ret = fusb302_pd_set_interrupts(chip, on); + if (ret < 0) { + fusb302_log(chip, "cannot turn %s pd interrupts, ret=%d", + on ? "on" : "off", ret); + goto done; + } + fusb302_log(chip, "pd := %s", on ? "on" : "off"); +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static const char * const typec_role_name[] = { + [TYPEC_SINK] = "Sink", + [TYPEC_SOURCE] = "Source", +}; + +static const char * const typec_data_role_name[] = { + [TYPEC_DEVICE] = "Device", + [TYPEC_HOST] = "Host", +}; + +static int tcpm_set_roles(struct tcpc_dev *dev, bool attached, + enum typec_role pwr, enum typec_data_role data) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + u8 switches1_mask = FUSB_REG_SWITCHES1_POWERROLE | + FUSB_REG_SWITCHES1_DATAROLE; + u8 switches1_data = 0x00; + + mutex_lock(&chip->lock); + if (pwr == TYPEC_SOURCE) + switches1_data |= FUSB_REG_SWITCHES1_POWERROLE; + if (data == TYPEC_HOST) + switches1_data |= FUSB_REG_SWITCHES1_DATAROLE; + ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES1, + switches1_mask, switches1_data); + if (ret < 0) { + fusb302_log(chip, "unable to set pd header %s, %s, ret=%d", + typec_role_name[pwr], typec_data_role_name[data], + ret); + goto done; + } + fusb302_log(chip, "pd header := %s, %s", typec_role_name[pwr], + typec_data_role_name[data]); +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static int tcpm_start_toggling(struct tcpc_dev *dev, + enum typec_port_type port_type, + enum typec_cc_status cc) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + enum toggling_mode mode = TOGGLING_MODE_OFF; + int ret = 0; + + switch (port_type) { + case TYPEC_PORT_SRC: + mode = TOGGLING_MODE_SRC; + break; + case TYPEC_PORT_SNK: + mode = TOGGLING_MODE_SNK; + break; + case TYPEC_PORT_DRP: + mode = TOGGLING_MODE_DRP; + break; + } + + mutex_lock(&chip->lock); + ret = fusb302_set_src_current(chip, cc_src_current[cc]); + if (ret < 0) { + fusb302_log(chip, "unable to set src current %s, ret=%d", + typec_cc_status_name[cc], ret); + goto done; + } + ret = fusb302_set_toggling(chip, mode); + if (ret < 0) { + fusb302_log(chip, + "unable to start drp toggling, ret=%d", ret); + goto done; + } + fusb302_log(chip, "start drp toggling"); +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static int fusb302_pd_send_message(struct fusb302_chip *chip, + const struct pd_message *msg) +{ + int ret = 0; + u8 buf[40]; + u8 pos = 0; + int len; + + /* SOP tokens */ + buf[pos++] = FUSB302_TKN_SYNC1; + buf[pos++] = FUSB302_TKN_SYNC1; + buf[pos++] = FUSB302_TKN_SYNC1; + buf[pos++] = FUSB302_TKN_SYNC2; + + len = pd_header_cnt_le(msg->header) * 4; + /* plug 2 for header */ + len += 2; + if (len > 0x1F) { + fusb302_log(chip, + "PD message too long %d (incl. header)", len); + return -EINVAL; + } + /* packsym tells the FUSB302 chip that the next X bytes are payload */ + buf[pos++] = FUSB302_TKN_PACKSYM | (len & 0x1F); + memcpy(&buf[pos], &msg->header, sizeof(msg->header)); + pos += sizeof(msg->header); + + len -= 2; + memcpy(&buf[pos], msg->payload, len); + pos += len; + + /* CRC */ + buf[pos++] = FUSB302_TKN_JAMCRC; + /* EOP */ + buf[pos++] = FUSB302_TKN_EOP; + /* turn tx off after sending message */ + buf[pos++] = FUSB302_TKN_TXOFF; + /* start transmission */ + buf[pos++] = FUSB302_TKN_TXON; + + ret = fusb302_i2c_block_write(chip, FUSB_REG_FIFOS, pos, buf); + if (ret < 0) + return ret; + fusb302_log(chip, "sending PD message header: %x", msg->header); + fusb302_log(chip, "sending PD message len: %d", len); + + return ret; +} + +static int fusb302_pd_send_hardreset(struct fusb302_chip *chip) +{ + return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3, + FUSB_REG_CONTROL3_SEND_HARDRESET); +} + +static const char * const transmit_type_name[] = { + [TCPC_TX_SOP] = "SOP", + [TCPC_TX_SOP_PRIME] = "SOP'", + [TCPC_TX_SOP_PRIME_PRIME] = "SOP''", + [TCPC_TX_SOP_DEBUG_PRIME] = "DEBUG'", + [TCPC_TX_SOP_DEBUG_PRIME_PRIME] = "DEBUG''", + [TCPC_TX_HARD_RESET] = "HARD_RESET", + [TCPC_TX_CABLE_RESET] = "CABLE_RESET", + [TCPC_TX_BIST_MODE_2] = "BIST_MODE_2", +}; + +static int tcpm_pd_transmit(struct tcpc_dev *dev, enum tcpm_transmit_type type, + const struct pd_message *msg, unsigned int negotiated_rev) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + + mutex_lock(&chip->lock); + switch (type) { + case TCPC_TX_SOP: + /* nRetryCount 3 in P2.0 spec, whereas 2 in PD3.0 spec */ + ret = fusb302_enable_tx_auto_retries(chip, negotiated_rev > PD_REV20 ? + FUSB_REG_CONTROL3_N_RETRIES_2 : + FUSB_REG_CONTROL3_N_RETRIES_3); + if (ret < 0) + fusb302_log(chip, "Cannot update retry count ret=%d", ret); + + ret = fusb302_pd_send_message(chip, msg); + if (ret < 0) + fusb302_log(chip, + "cannot send PD message, ret=%d", ret); + break; + case TCPC_TX_HARD_RESET: + ret = fusb302_pd_send_hardreset(chip); + if (ret < 0) + fusb302_log(chip, + "cannot send hardreset, ret=%d", ret); + break; + default: + fusb302_log(chip, "type %s not supported", + transmit_type_name[type]); + ret = -EINVAL; + } + mutex_unlock(&chip->lock); + + return ret; +} + +static enum typec_cc_status fusb302_bc_lvl_to_cc(u8 bc_lvl) +{ + if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_1230_MAX) + return TYPEC_CC_RP_3_0; + if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_600_1230) + return TYPEC_CC_RP_1_5; + if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_200_600) + return TYPEC_CC_RP_DEF; + return TYPEC_CC_OPEN; +} + +static void fusb302_bc_lvl_handler_work(struct work_struct *work) +{ + struct fusb302_chip *chip = container_of(work, struct fusb302_chip, + bc_lvl_handler.work); + int ret = 0; + u8 status0; + u8 bc_lvl; + enum typec_cc_status cc_status; + + mutex_lock(&chip->lock); + if (!chip->intr_bc_lvl) { + fusb302_log(chip, "BC_LVL interrupt is turned off, abort"); + goto done; + } + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0); + if (ret < 0) + goto done; + fusb302_log(chip, "BC_LVL handler, status0=0x%02x", status0); + if (status0 & FUSB_REG_STATUS0_ACTIVITY) { + fusb302_log(chip, "CC activities detected, delay handling"); + mod_delayed_work(chip->wq, &chip->bc_lvl_handler, + msecs_to_jiffies(T_BC_LVL_DEBOUNCE_DELAY_MS)); + goto done; + } + bc_lvl = status0 & FUSB_REG_STATUS0_BC_LVL_MASK; + cc_status = fusb302_bc_lvl_to_cc(bc_lvl); + if (chip->cc_polarity == TYPEC_POLARITY_CC1) { + if (chip->cc1 != cc_status) { + fusb302_log(chip, "cc1: %s -> %s", + typec_cc_status_name[chip->cc1], + typec_cc_status_name[cc_status]); + chip->cc1 = cc_status; + tcpm_cc_change(chip->tcpm_port); + } + } else { + if (chip->cc2 != cc_status) { + fusb302_log(chip, "cc2: %s -> %s", + typec_cc_status_name[chip->cc2], + typec_cc_status_name[cc_status]); + chip->cc2 = cc_status; + tcpm_cc_change(chip->tcpm_port); + } + } + +done: + mutex_unlock(&chip->lock); +} + +static void init_tcpc_dev(struct tcpc_dev *fusb302_tcpc_dev) +{ + fusb302_tcpc_dev->init = tcpm_init; + fusb302_tcpc_dev->get_vbus = tcpm_get_vbus; + fusb302_tcpc_dev->get_current_limit = tcpm_get_current_limit; + fusb302_tcpc_dev->set_cc = tcpm_set_cc; + fusb302_tcpc_dev->get_cc = tcpm_get_cc; + fusb302_tcpc_dev->set_polarity = tcpm_set_polarity; + fusb302_tcpc_dev->set_vconn = tcpm_set_vconn; + fusb302_tcpc_dev->set_vbus = tcpm_set_vbus; + fusb302_tcpc_dev->set_pd_rx = tcpm_set_pd_rx; + fusb302_tcpc_dev->set_roles = tcpm_set_roles; + fusb302_tcpc_dev->start_toggling = tcpm_start_toggling; + fusb302_tcpc_dev->pd_transmit = tcpm_pd_transmit; +} + +static const char * const cc_polarity_name[] = { + [TYPEC_POLARITY_CC1] = "Polarity_CC1", + [TYPEC_POLARITY_CC2] = "Polarity_CC2", +}; + +static int fusb302_set_cc_polarity_and_pull(struct fusb302_chip *chip, + enum typec_cc_polarity cc_polarity, + bool pull_up, bool pull_down) +{ + int ret = 0; + u8 switches0_data = 0x00; + u8 switches1_mask = FUSB_REG_SWITCHES1_TXCC1_EN | + FUSB_REG_SWITCHES1_TXCC2_EN; + u8 switches1_data = 0x00; + + if (pull_down) + switches0_data |= FUSB_REG_SWITCHES0_CC1_PD_EN | + FUSB_REG_SWITCHES0_CC2_PD_EN; + + if (cc_polarity == TYPEC_POLARITY_CC1) { + switches0_data |= FUSB_REG_SWITCHES0_MEAS_CC1; + if (chip->vconn_on) + switches0_data |= FUSB_REG_SWITCHES0_VCONN_CC2; + if (pull_up) + switches0_data |= FUSB_REG_SWITCHES0_CC1_PU_EN; + switches1_data = FUSB_REG_SWITCHES1_TXCC1_EN; + } else { + switches0_data |= FUSB_REG_SWITCHES0_MEAS_CC2; + if (chip->vconn_on) + switches0_data |= FUSB_REG_SWITCHES0_VCONN_CC1; + if (pull_up) + switches0_data |= FUSB_REG_SWITCHES0_CC2_PU_EN; + switches1_data = FUSB_REG_SWITCHES1_TXCC2_EN; + } + ret = fusb302_i2c_write(chip, FUSB_REG_SWITCHES0, switches0_data); + if (ret < 0) + return ret; + ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES1, + switches1_mask, switches1_data); + if (ret < 0) + return ret; + chip->cc_polarity = cc_polarity; + + return ret; +} + +static int fusb302_handle_togdone_snk(struct fusb302_chip *chip, + u8 togdone_result) +{ + int ret = 0; + u8 status0; + u8 bc_lvl; + enum typec_cc_polarity cc_polarity; + enum typec_cc_status cc_status_active, cc1, cc2; + + /* set polarity and pull_up, pull_down */ + cc_polarity = (togdone_result == FUSB_REG_STATUS1A_TOGSS_SNK1) ? + TYPEC_POLARITY_CC1 : TYPEC_POLARITY_CC2; + ret = fusb302_set_cc_polarity_and_pull(chip, cc_polarity, false, true); + if (ret < 0) { + fusb302_log(chip, "cannot set cc polarity %s, ret=%d", + cc_polarity_name[cc_polarity], ret); + return ret; + } + /* fusb302_set_cc_polarity() has set the correct measure block */ + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0); + if (ret < 0) + return ret; + bc_lvl = status0 & FUSB_REG_STATUS0_BC_LVL_MASK; + cc_status_active = fusb302_bc_lvl_to_cc(bc_lvl); + /* restart toggling if the cc status on the active line is OPEN */ + if (cc_status_active == TYPEC_CC_OPEN) { + fusb302_log(chip, "restart toggling as CC_OPEN detected"); + ret = fusb302_set_toggling(chip, chip->toggling_mode); + return ret; + } + /* update tcpm with the new cc value */ + cc1 = (cc_polarity == TYPEC_POLARITY_CC1) ? + cc_status_active : TYPEC_CC_OPEN; + cc2 = (cc_polarity == TYPEC_POLARITY_CC2) ? + cc_status_active : TYPEC_CC_OPEN; + if ((chip->cc1 != cc1) || (chip->cc2 != cc2)) { + chip->cc1 = cc1; + chip->cc2 = cc2; + tcpm_cc_change(chip->tcpm_port); + } + /* turn off toggling */ + ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF); + if (ret < 0) { + fusb302_log(chip, + "cannot set toggling mode off, ret=%d", ret); + return ret; + } + /* unmask bc_lvl interrupt */ + ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, FUSB_REG_MASK_BC_LVL); + if (ret < 0) { + fusb302_log(chip, + "cannot unmask bc_lcl interrupt, ret=%d", ret); + return ret; + } + chip->intr_bc_lvl = true; + fusb302_log(chip, "detected cc1=%s, cc2=%s", + typec_cc_status_name[cc1], + typec_cc_status_name[cc2]); + + return ret; +} + +/* On error returns < 0, otherwise a typec_cc_status value */ +static int fusb302_get_src_cc_status(struct fusb302_chip *chip, + enum typec_cc_polarity cc_polarity, + enum typec_cc_status *cc) +{ + u8 ra_mda = ra_mda_value[chip->src_current_status]; + u8 rd_mda = rd_mda_value[chip->src_current_status]; + u8 switches0_data, status0; + int ret; + + /* Step 1: Set switches so that we measure the right CC pin */ + switches0_data = (cc_polarity == TYPEC_POLARITY_CC1) ? + FUSB_REG_SWITCHES0_CC1_PU_EN | FUSB_REG_SWITCHES0_MEAS_CC1 : + FUSB_REG_SWITCHES0_CC2_PU_EN | FUSB_REG_SWITCHES0_MEAS_CC2; + ret = fusb302_i2c_write(chip, FUSB_REG_SWITCHES0, switches0_data); + if (ret < 0) + return ret; + + fusb302_i2c_read(chip, FUSB_REG_SWITCHES0, &status0); + fusb302_log(chip, "get_src_cc_status switches: 0x%0x", status0); + + /* Step 2: Set compararator volt to differentiate between Open and Rd */ + ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda); + if (ret < 0) + return ret; + + usleep_range(50, 100); + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0); + if (ret < 0) + return ret; + + fusb302_log(chip, "get_src_cc_status rd_mda status0: 0x%0x", status0); + if (status0 & FUSB_REG_STATUS0_COMP) { + *cc = TYPEC_CC_OPEN; + return 0; + } + + /* Step 3: Set compararator input to differentiate between Rd and Ra. */ + ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, ra_mda); + if (ret < 0) + return ret; + + usleep_range(50, 100); + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0); + if (ret < 0) + return ret; + + fusb302_log(chip, "get_src_cc_status ra_mda status0: 0x%0x", status0); + if (status0 & FUSB_REG_STATUS0_COMP) + *cc = TYPEC_CC_RD; + else + *cc = TYPEC_CC_RA; + + return 0; +} + +static int fusb302_handle_togdone_src(struct fusb302_chip *chip, + u8 togdone_result) +{ + /* + * - set polarity (measure cc, vconn, tx) + * - set pull_up, pull_down + * - set cc1, cc2, and update to tcpm_port + * - set I_COMP interrupt on + */ + int ret = 0; + u8 rd_mda = rd_mda_value[chip->src_current_status]; + enum toggling_mode toggling_mode = chip->toggling_mode; + enum typec_cc_polarity cc_polarity; + enum typec_cc_status cc1, cc2; + + /* + * The toggle-engine will stop in a src state if it sees either Ra or + * Rd. Determine the status for both CC pins, starting with the one + * where toggling stopped, as that is where the switches point now. + */ + if (togdone_result == FUSB_REG_STATUS1A_TOGSS_SRC1) + ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC1, &cc1); + else + ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC2, &cc2); + if (ret < 0) + return ret; + /* we must turn off toggling before we can measure the other pin */ + ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF); + if (ret < 0) { + fusb302_log(chip, "cannot set toggling mode off, ret=%d", ret); + return ret; + } + /* get the status of the other pin */ + if (togdone_result == FUSB_REG_STATUS1A_TOGSS_SRC1) + ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC2, &cc2); + else + ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC1, &cc1); + if (ret < 0) + return ret; + + /* determine polarity based on the status of both pins */ + if (cc1 == TYPEC_CC_RD && + (cc2 == TYPEC_CC_OPEN || cc2 == TYPEC_CC_RA)) { + cc_polarity = TYPEC_POLARITY_CC1; + } else if (cc2 == TYPEC_CC_RD && + (cc1 == TYPEC_CC_OPEN || cc1 == TYPEC_CC_RA)) { + cc_polarity = TYPEC_POLARITY_CC2; + } else { + fusb302_log(chip, "unexpected CC status cc1=%s, cc2=%s, restarting toggling", + typec_cc_status_name[cc1], + typec_cc_status_name[cc2]); + return fusb302_set_toggling(chip, toggling_mode); + } + /* set polarity and pull_up, pull_down */ + ret = fusb302_set_cc_polarity_and_pull(chip, cc_polarity, true, false); + if (ret < 0) { + fusb302_log(chip, "cannot set cc polarity %s, ret=%d", + cc_polarity_name[cc_polarity], ret); + return ret; + } + /* update tcpm with the new cc value */ + if ((chip->cc1 != cc1) || (chip->cc2 != cc2)) { + chip->cc1 = cc1; + chip->cc2 = cc2; + tcpm_cc_change(chip->tcpm_port); + } + /* set MDAC to Rd threshold, and unmask I_COMP for unplug detection */ + ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda); + if (ret < 0) + return ret; + /* unmask comp_chng interrupt */ + ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, + FUSB_REG_MASK_COMP_CHNG); + if (ret < 0) { + fusb302_log(chip, + "cannot unmask comp_chng interrupt, ret=%d", ret); + return ret; + } + chip->intr_comp_chng = true; + fusb302_log(chip, "detected cc1=%s, cc2=%s", + typec_cc_status_name[cc1], + typec_cc_status_name[cc2]); + + return ret; +} + +static int fusb302_handle_togdone(struct fusb302_chip *chip) +{ + int ret = 0; + u8 status1a; + u8 togdone_result; + + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS1A, &status1a); + if (ret < 0) + return ret; + togdone_result = (status1a >> FUSB_REG_STATUS1A_TOGSS_POS) & + FUSB_REG_STATUS1A_TOGSS_MASK; + switch (togdone_result) { + case FUSB_REG_STATUS1A_TOGSS_SNK1: + case FUSB_REG_STATUS1A_TOGSS_SNK2: + return fusb302_handle_togdone_snk(chip, togdone_result); + case FUSB_REG_STATUS1A_TOGSS_SRC1: + case FUSB_REG_STATUS1A_TOGSS_SRC2: + return fusb302_handle_togdone_src(chip, togdone_result); + case FUSB_REG_STATUS1A_TOGSS_AA: + /* doesn't support */ + fusb302_log(chip, "AudioAccessory not supported"); + fusb302_set_toggling(chip, chip->toggling_mode); + break; + default: + fusb302_log(chip, "TOGDONE with an invalid state: %d", + togdone_result); + fusb302_set_toggling(chip, chip->toggling_mode); + break; + } + return ret; +} + +static int fusb302_pd_reset(struct fusb302_chip *chip) +{ + return fusb302_i2c_set_bits(chip, FUSB_REG_RESET, + FUSB_REG_RESET_PD_RESET); +} + +static int fusb302_pd_read_message(struct fusb302_chip *chip, + struct pd_message *msg) +{ + int ret = 0; + u8 token; + u8 crc[4]; + int len; + + /* first SOP token */ + ret = fusb302_i2c_read(chip, FUSB_REG_FIFOS, &token); + if (ret < 0) + return ret; + ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, 2, + (u8 *)&msg->header); + if (ret < 0) + return ret; + len = pd_header_cnt_le(msg->header) * 4; + /* add 4 to length to include the CRC */ + if (len > PD_MAX_PAYLOAD * 4) { + fusb302_log(chip, "PD message too long %d", len); + return -EINVAL; + } + if (len > 0) { + ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, len, + (u8 *)msg->payload); + if (ret < 0) + return ret; + } + /* another 4 bytes to read CRC out */ + ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, 4, crc); + if (ret < 0) + return ret; + fusb302_log(chip, "PD message header: %x", msg->header); + fusb302_log(chip, "PD message len: %d", len); + + /* + * Check if we've read off a GoodCRC message. If so then indicate to + * TCPM that the previous transmission has completed. Otherwise we pass + * the received message over to TCPM for processing. + * + * We make this check here instead of basing the reporting decision on + * the IRQ event type, as it's possible for the chip to report the + * TX_SUCCESS and GCRCSENT events out of order on occasion, so we need + * to check the message type to ensure correct reporting to TCPM. + */ + if ((!len) && (pd_header_type_le(msg->header) == PD_CTRL_GOOD_CRC)) + tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS); + else + tcpm_pd_receive(chip->tcpm_port, msg); + + return ret; +} + +static irqreturn_t fusb302_irq_intn(int irq, void *dev_id) +{ + struct fusb302_chip *chip = dev_id; + unsigned long flags; + + /* Disable our level triggered IRQ until our irq_work has cleared it */ + disable_irq_nosync(chip->gpio_int_n_irq); + + spin_lock_irqsave(&chip->irq_lock, flags); + if (chip->irq_suspended) + chip->irq_while_suspended = true; + else + schedule_work(&chip->irq_work); + spin_unlock_irqrestore(&chip->irq_lock, flags); + + return IRQ_HANDLED; +} + +static void fusb302_irq_work(struct work_struct *work) +{ + struct fusb302_chip *chip = container_of(work, struct fusb302_chip, + irq_work); + int ret = 0; + u8 interrupt; + u8 interrupta; + u8 interruptb; + u8 status0; + bool vbus_present; + bool comp_result; + bool intr_togdone; + bool intr_bc_lvl; + bool intr_comp_chng; + struct pd_message pd_msg; + + mutex_lock(&chip->lock); + /* grab a snapshot of intr flags */ + intr_togdone = chip->intr_togdone; + intr_bc_lvl = chip->intr_bc_lvl; + intr_comp_chng = chip->intr_comp_chng; + + ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPT, &interrupt); + if (ret < 0) + goto done; + ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPTA, &interrupta); + if (ret < 0) + goto done; + ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPTB, &interruptb); + if (ret < 0) + goto done; + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0); + if (ret < 0) + goto done; + fusb302_log(chip, + "IRQ: 0x%02x, a: 0x%02x, b: 0x%02x, status0: 0x%02x", + interrupt, interrupta, interruptb, status0); + + if (interrupt & FUSB_REG_INTERRUPT_VBUSOK) { + vbus_present = !!(status0 & FUSB_REG_STATUS0_VBUSOK); + fusb302_log(chip, "IRQ: VBUS_OK, vbus=%s", + vbus_present ? "On" : "Off"); + if (vbus_present != chip->vbus_present) { + chip->vbus_present = vbus_present; + tcpm_vbus_change(chip->tcpm_port); + } + } + + if ((interrupta & FUSB_REG_INTERRUPTA_TOGDONE) && intr_togdone) { + fusb302_log(chip, "IRQ: TOGDONE"); + ret = fusb302_handle_togdone(chip); + if (ret < 0) { + fusb302_log(chip, + "handle togdone error, ret=%d", ret); + goto done; + } + } + + if ((interrupt & FUSB_REG_INTERRUPT_BC_LVL) && intr_bc_lvl) { + fusb302_log(chip, "IRQ: BC_LVL, handler pending"); + /* + * as BC_LVL interrupt can be affected by PD activity, + * apply delay to for the handler to wait for the PD + * signaling to finish. + */ + mod_delayed_work(chip->wq, &chip->bc_lvl_handler, + msecs_to_jiffies(T_BC_LVL_DEBOUNCE_DELAY_MS)); + } + + if ((interrupt & FUSB_REG_INTERRUPT_COMP_CHNG) && intr_comp_chng) { + comp_result = !!(status0 & FUSB_REG_STATUS0_COMP); + fusb302_log(chip, "IRQ: COMP_CHNG, comp=%s", + comp_result ? "true" : "false"); + if (comp_result) { + /* cc level > Rd_threshold, detach */ + chip->cc1 = TYPEC_CC_OPEN; + chip->cc2 = TYPEC_CC_OPEN; + tcpm_cc_change(chip->tcpm_port); + } + } + + if (interrupt & FUSB_REG_INTERRUPT_COLLISION) { + fusb302_log(chip, "IRQ: PD collision"); + tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_FAILED); + } + + if (interrupta & FUSB_REG_INTERRUPTA_RETRYFAIL) { + fusb302_log(chip, "IRQ: PD retry failed"); + tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_FAILED); + } + + if (interrupta & FUSB_REG_INTERRUPTA_HARDSENT) { + fusb302_log(chip, "IRQ: PD hardreset sent"); + ret = fusb302_pd_reset(chip); + if (ret < 0) { + fusb302_log(chip, "cannot PD reset, ret=%d", ret); + goto done; + } + tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS); + } + + if (interrupta & FUSB_REG_INTERRUPTA_TX_SUCCESS) { + fusb302_log(chip, "IRQ: PD tx success"); + ret = fusb302_pd_read_message(chip, &pd_msg); + if (ret < 0) { + fusb302_log(chip, + "cannot read in PD message, ret=%d", ret); + goto done; + } + } + + if (interrupta & FUSB_REG_INTERRUPTA_HARDRESET) { + fusb302_log(chip, "IRQ: PD received hardreset"); + ret = fusb302_pd_reset(chip); + if (ret < 0) { + fusb302_log(chip, "cannot PD reset, ret=%d", ret); + goto done; + } + tcpm_pd_hard_reset(chip->tcpm_port); + } + + if (interruptb & FUSB_REG_INTERRUPTB_GCRCSENT) { + fusb302_log(chip, "IRQ: PD sent good CRC"); + ret = fusb302_pd_read_message(chip, &pd_msg); + if (ret < 0) { + fusb302_log(chip, + "cannot read in PD message, ret=%d", ret); + goto done; + } + } +done: + mutex_unlock(&chip->lock); + enable_irq(chip->gpio_int_n_irq); +} + +static int init_gpio(struct fusb302_chip *chip) +{ + struct device *dev = chip->dev; + int ret = 0; + + chip->gpio_int_n = devm_gpiod_get(dev, "fcs,int_n", GPIOD_IN); + if (IS_ERR(chip->gpio_int_n)) { + dev_err(dev, "failed to request gpio_int_n\n"); + return PTR_ERR(chip->gpio_int_n); + } + ret = gpiod_to_irq(chip->gpio_int_n); + if (ret < 0) { + dev_err(dev, + "cannot request IRQ for GPIO Int_N, ret=%d", ret); + return ret; + } + chip->gpio_int_n_irq = ret; + return 0; +} + +#define PDO_FIXED_FLAGS \ + (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM) + +static const u32 src_pdo[] = { + PDO_FIXED(5000, 400, PDO_FIXED_FLAGS) +}; + +static const u32 snk_pdo[] = { + PDO_FIXED(5000, 400, PDO_FIXED_FLAGS) +}; + +static const struct property_entry port_props[] = { + PROPERTY_ENTRY_STRING("data-role", "dual"), + PROPERTY_ENTRY_STRING("power-role", "dual"), + PROPERTY_ENTRY_STRING("try-power-role", "sink"), + PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo), + PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo), + PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000), + { } +}; + +static struct fwnode_handle *fusb302_fwnode_get(struct device *dev) +{ + struct fwnode_handle *fwnode; + + fwnode = device_get_named_child_node(dev, "connector"); + if (!fwnode) + fwnode = fwnode_create_software_node(port_props, NULL); + + return fwnode; +} + +static int fusb302_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct fusb302_chip *chip; + struct i2c_adapter *adapter = client->adapter; + struct device *dev = &client->dev; + const char *name; + int ret = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + dev_err(&client->dev, + "I2C/SMBus block functionality not supported!\n"); + return -ENODEV; + } + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->i2c_client = client; + chip->dev = &client->dev; + mutex_init(&chip->lock); + + /* + * Devicetree platforms should get extcon via phandle (not yet + * supported). On ACPI platforms, we get the name from a device prop. + * This device prop is for kernel internal use only and is expected + * to be set by the platform code which also registers the i2c client + * for the fusb302. + */ + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) { + chip->extcon = extcon_get_extcon_dev(name); + if (IS_ERR(chip->extcon)) + return PTR_ERR(chip->extcon); + } + + chip->vbus = devm_regulator_get(chip->dev, "vbus"); + if (IS_ERR(chip->vbus)) + return PTR_ERR(chip->vbus); + + chip->wq = create_singlethread_workqueue(dev_name(chip->dev)); + if (!chip->wq) + return -ENOMEM; + + spin_lock_init(&chip->irq_lock); + INIT_WORK(&chip->irq_work, fusb302_irq_work); + INIT_DELAYED_WORK(&chip->bc_lvl_handler, fusb302_bc_lvl_handler_work); + init_tcpc_dev(&chip->tcpc_dev); + fusb302_debugfs_init(chip); + + if (client->irq) { + chip->gpio_int_n_irq = client->irq; + } else { + ret = init_gpio(chip); + if (ret < 0) + goto destroy_workqueue; + } + + chip->tcpc_dev.fwnode = fusb302_fwnode_get(dev); + if (IS_ERR(chip->tcpc_dev.fwnode)) { + ret = PTR_ERR(chip->tcpc_dev.fwnode); + goto destroy_workqueue; + } + + chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev); + if (IS_ERR(chip->tcpm_port)) { + fwnode_handle_put(chip->tcpc_dev.fwnode); + ret = dev_err_probe(dev, PTR_ERR(chip->tcpm_port), + "cannot register tcpm port\n"); + goto destroy_workqueue; + } + + ret = request_irq(chip->gpio_int_n_irq, fusb302_irq_intn, + IRQF_ONESHOT | IRQF_TRIGGER_LOW, + "fsc_interrupt_int_n", chip); + if (ret < 0) { + dev_err(dev, "cannot request IRQ for GPIO Int_N, ret=%d", ret); + goto tcpm_unregister_port; + } + enable_irq_wake(chip->gpio_int_n_irq); + i2c_set_clientdata(client, chip); + + return ret; + +tcpm_unregister_port: + tcpm_unregister_port(chip->tcpm_port); + fwnode_handle_put(chip->tcpc_dev.fwnode); +destroy_workqueue: + fusb302_debugfs_exit(chip); + destroy_workqueue(chip->wq); + + return ret; +} + +static void fusb302_remove(struct i2c_client *client) +{ + struct fusb302_chip *chip = i2c_get_clientdata(client); + + disable_irq_wake(chip->gpio_int_n_irq); + free_irq(chip->gpio_int_n_irq, chip); + cancel_work_sync(&chip->irq_work); + cancel_delayed_work_sync(&chip->bc_lvl_handler); + tcpm_unregister_port(chip->tcpm_port); + fwnode_handle_put(chip->tcpc_dev.fwnode); + destroy_workqueue(chip->wq); + fusb302_debugfs_exit(chip); +} + +static int fusb302_pm_suspend(struct device *dev) +{ + struct fusb302_chip *chip = dev->driver_data; + unsigned long flags; + + spin_lock_irqsave(&chip->irq_lock, flags); + chip->irq_suspended = true; + spin_unlock_irqrestore(&chip->irq_lock, flags); + + /* Make sure any pending irq_work is finished before the bus suspends */ + flush_work(&chip->irq_work); + return 0; +} + +static int fusb302_pm_resume(struct device *dev) +{ + struct fusb302_chip *chip = dev->driver_data; + unsigned long flags; + + spin_lock_irqsave(&chip->irq_lock, flags); + if (chip->irq_while_suspended) { + schedule_work(&chip->irq_work); + chip->irq_while_suspended = false; + } + chip->irq_suspended = false; + spin_unlock_irqrestore(&chip->irq_lock, flags); + + return 0; +} + +static const struct of_device_id fusb302_dt_match[] = { + {.compatible = "fcs,fusb302"}, + {}, +}; +MODULE_DEVICE_TABLE(of, fusb302_dt_match); + +static const struct i2c_device_id fusb302_i2c_device_id[] = { + {"typec_fusb302", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, fusb302_i2c_device_id); + +static const struct dev_pm_ops fusb302_pm_ops = { + .suspend = fusb302_pm_suspend, + .resume = fusb302_pm_resume, +}; + +static struct i2c_driver fusb302_driver = { + .driver = { + .name = "typec_fusb302", + .pm = &fusb302_pm_ops, + .of_match_table = of_match_ptr(fusb302_dt_match), + }, + .probe = fusb302_probe, + .remove = fusb302_remove, + .id_table = fusb302_i2c_device_id, +}; +module_i2c_driver(fusb302_driver); + +MODULE_AUTHOR("Yueyao Zhu <yueyao.zhu@gmail.com>"); +MODULE_DESCRIPTION("Fairchild FUSB302 Type-C Chip Driver"); +MODULE_LICENSE("GPL"); |