diff options
Diffstat (limited to 'drivers/video/fbdev/ssd1307fb.c')
| -rw-r--r-- | drivers/video/fbdev/ssd1307fb.c | 864 |
1 files changed, 864 insertions, 0 deletions
diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c new file mode 100644 index 000000000..5c891aa00 --- /dev/null +++ b/drivers/video/fbdev/ssd1307fb.c @@ -0,0 +1,864 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for the Solomon SSD1307 OLED controller + * + * Copyright 2012 Free Electrons + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/property.h> +#include <linux/pwm.h> +#include <linux/uaccess.h> +#include <linux/regulator/consumer.h> + +#define SSD1307FB_DATA 0x40 +#define SSD1307FB_COMMAND 0x80 + +#define SSD1307FB_SET_ADDRESS_MODE 0x20 +#define SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL (0x00) +#define SSD1307FB_SET_ADDRESS_MODE_VERTICAL (0x01) +#define SSD1307FB_SET_ADDRESS_MODE_PAGE (0x02) +#define SSD1307FB_SET_COL_RANGE 0x21 +#define SSD1307FB_SET_PAGE_RANGE 0x22 +#define SSD1307FB_CONTRAST 0x81 +#define SSD1307FB_SET_LOOKUP_TABLE 0x91 +#define SSD1307FB_CHARGE_PUMP 0x8d +#define SSD1307FB_SEG_REMAP_ON 0xa1 +#define SSD1307FB_DISPLAY_OFF 0xae +#define SSD1307FB_SET_MULTIPLEX_RATIO 0xa8 +#define SSD1307FB_DISPLAY_ON 0xaf +#define SSD1307FB_START_PAGE_ADDRESS 0xb0 +#define SSD1307FB_SET_DISPLAY_OFFSET 0xd3 +#define SSD1307FB_SET_CLOCK_FREQ 0xd5 +#define SSD1307FB_SET_AREA_COLOR_MODE 0xd8 +#define SSD1307FB_SET_PRECHARGE_PERIOD 0xd9 +#define SSD1307FB_SET_COM_PINS_CONFIG 0xda +#define SSD1307FB_SET_VCOMH 0xdb + +#define MAX_CONTRAST 255 + +#define REFRESHRATE 1 + +static u_int refreshrate = REFRESHRATE; +module_param(refreshrate, uint, 0); + +struct ssd1307fb_deviceinfo { + u32 default_vcomh; + u32 default_dclk_div; + u32 default_dclk_frq; + int need_pwm; + int need_chargepump; +}; + +struct ssd1307fb_par { + unsigned area_color_enable : 1; + unsigned com_invdir : 1; + unsigned com_lrremap : 1; + unsigned com_seq : 1; + unsigned lookup_table_set : 1; + unsigned low_power : 1; + unsigned seg_remap : 1; + u32 com_offset; + u32 contrast; + u32 dclk_div; + u32 dclk_frq; + const struct ssd1307fb_deviceinfo *device_info; + struct i2c_client *client; + u32 height; + struct fb_info *info; + u8 lookup_table[4]; + u32 page_offset; + u32 col_offset; + u32 prechargep1; + u32 prechargep2; + struct pwm_device *pwm; + struct gpio_desc *reset; + struct regulator *vbat_reg; + u32 vcomh; + u32 width; + /* Cached address ranges */ + u8 col_start; + u8 col_end; + u8 page_start; + u8 page_end; +}; + +struct ssd1307fb_array { + u8 type; + u8 data[]; +}; + +static const struct fb_fix_screeninfo ssd1307fb_fix = { + .id = "Solomon SSD1307", + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_MONO10, + .xpanstep = 0, + .ypanstep = 0, + .ywrapstep = 0, + .accel = FB_ACCEL_NONE, +}; + +static const struct fb_var_screeninfo ssd1307fb_var = { + .bits_per_pixel = 1, + .red = { .length = 1 }, + .green = { .length = 1 }, + .blue = { .length = 1 }, +}; + +static struct ssd1307fb_array *ssd1307fb_alloc_array(u32 len, u8 type) +{ + struct ssd1307fb_array *array; + + array = kzalloc(sizeof(struct ssd1307fb_array) + len, GFP_KERNEL); + if (!array) + return NULL; + + array->type = type; + + return array; +} + +static int ssd1307fb_write_array(struct i2c_client *client, + struct ssd1307fb_array *array, u32 len) +{ + int ret; + + len += sizeof(struct ssd1307fb_array); + + ret = i2c_master_send(client, (u8 *)array, len); + if (ret != len) { + dev_err(&client->dev, "Couldn't send I2C command.\n"); + return ret; + } + + return 0; +} + +static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd) +{ + struct ssd1307fb_array *array; + int ret; + + array = ssd1307fb_alloc_array(1, SSD1307FB_COMMAND); + if (!array) + return -ENOMEM; + + array->data[0] = cmd; + + ret = ssd1307fb_write_array(client, array, 1); + kfree(array); + + return ret; +} + +static int ssd1307fb_set_col_range(struct ssd1307fb_par *par, u8 col_start, + u8 cols) +{ + u8 col_end = col_start + cols - 1; + int ret; + + if (col_start == par->col_start && col_end == par->col_end) + return 0; + + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, col_start); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, col_end); + if (ret < 0) + return ret; + + par->col_start = col_start; + par->col_end = col_end; + return 0; +} + +static int ssd1307fb_set_page_range(struct ssd1307fb_par *par, u8 page_start, + u8 pages) +{ + u8 page_end = page_start + pages - 1; + int ret; + + if (page_start == par->page_start && page_end == par->page_end) + return 0; + + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, page_start); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, page_end); + if (ret < 0) + return ret; + + par->page_start = page_start; + par->page_end = page_end; + return 0; +} + +static int ssd1307fb_update_rect(struct ssd1307fb_par *par, unsigned int x, + unsigned int y, unsigned int width, + unsigned int height) +{ + struct ssd1307fb_array *array; + u8 *vmem = par->info->screen_buffer; + unsigned int line_length = par->info->fix.line_length; + unsigned int pages = DIV_ROUND_UP(y % 8 + height, 8); + u32 array_idx = 0; + int ret, i, j, k; + + array = ssd1307fb_alloc_array(width * pages, SSD1307FB_DATA); + if (!array) + return -ENOMEM; + + /* + * The screen is divided in pages, each having a height of 8 + * pixels, and the width of the screen. When sending a byte of + * data to the controller, it gives the 8 bits for the current + * column. I.e, the first byte are the 8 bits of the first + * column, then the 8 bits for the second column, etc. + * + * + * Representation of the screen, assuming it is 5 bits + * wide. Each letter-number combination is a bit that controls + * one pixel. + * + * A0 A1 A2 A3 A4 + * B0 B1 B2 B3 B4 + * C0 C1 C2 C3 C4 + * D0 D1 D2 D3 D4 + * E0 E1 E2 E3 E4 + * F0 F1 F2 F3 F4 + * G0 G1 G2 G3 G4 + * H0 H1 H2 H3 H4 + * + * If you want to update this screen, you need to send 5 bytes: + * (1) A0 B0 C0 D0 E0 F0 G0 H0 + * (2) A1 B1 C1 D1 E1 F1 G1 H1 + * (3) A2 B2 C2 D2 E2 F2 G2 H2 + * (4) A3 B3 C3 D3 E3 F3 G3 H3 + * (5) A4 B4 C4 D4 E4 F4 G4 H4 + */ + + ret = ssd1307fb_set_col_range(par, par->col_offset + x, width); + if (ret < 0) + goto out_free; + + ret = ssd1307fb_set_page_range(par, par->page_offset + y / 8, pages); + if (ret < 0) + goto out_free; + + for (i = y / 8; i < y / 8 + pages; i++) { + int m = 8; + + /* Last page may be partial */ + if (8 * (i + 1) > par->height) + m = par->height % 8; + for (j = x; j < x + width; j++) { + u8 data = 0; + + for (k = 0; k < m; k++) { + u8 byte = vmem[(8 * i + k) * line_length + + j / 8]; + u8 bit = (byte >> (j % 8)) & 1; + data |= bit << k; + } + array->data[array_idx++] = data; + } + } + + ret = ssd1307fb_write_array(par->client, array, width * pages); + +out_free: + kfree(array); + return ret; +} + +static int ssd1307fb_update_display(struct ssd1307fb_par *par) +{ + return ssd1307fb_update_rect(par, 0, 0, par->width, par->height); +} + +static ssize_t ssd1307fb_write(struct fb_info *info, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct ssd1307fb_par *par = info->par; + unsigned long total_size; + unsigned long p = *ppos; + void *dst; + int ret; + + total_size = info->fix.smem_len; + + if (p > total_size) + return -EINVAL; + + if (count + p > total_size) + count = total_size - p; + + if (!count) + return -EINVAL; + + dst = info->screen_buffer + p; + + if (copy_from_user(dst, buf, count)) + return -EFAULT; + + ret = ssd1307fb_update_display(par); + if (ret < 0) + return ret; + + *ppos += count; + + return count; +} + +static int ssd1307fb_blank(int blank_mode, struct fb_info *info) +{ + struct ssd1307fb_par *par = info->par; + + if (blank_mode != FB_BLANK_UNBLANK) + return ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_OFF); + else + return ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON); +} + +static void ssd1307fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) +{ + struct ssd1307fb_par *par = info->par; + sys_fillrect(info, rect); + ssd1307fb_update_rect(par, rect->dx, rect->dy, rect->width, + rect->height); +} + +static void ssd1307fb_copyarea(struct fb_info *info, const struct fb_copyarea *area) +{ + struct ssd1307fb_par *par = info->par; + sys_copyarea(info, area); + ssd1307fb_update_rect(par, area->dx, area->dy, area->width, + area->height); +} + +static void ssd1307fb_imageblit(struct fb_info *info, const struct fb_image *image) +{ + struct ssd1307fb_par *par = info->par; + sys_imageblit(info, image); + ssd1307fb_update_rect(par, image->dx, image->dy, image->width, + image->height); +} + +static const struct fb_ops ssd1307fb_ops = { + .owner = THIS_MODULE, + .fb_read = fb_sys_read, + .fb_write = ssd1307fb_write, + .fb_blank = ssd1307fb_blank, + .fb_fillrect = ssd1307fb_fillrect, + .fb_copyarea = ssd1307fb_copyarea, + .fb_imageblit = ssd1307fb_imageblit, + .fb_mmap = fb_deferred_io_mmap, +}; + +static void ssd1307fb_deferred_io(struct fb_info *info, struct list_head *pagereflist) +{ + ssd1307fb_update_display(info->par); +} + +static int ssd1307fb_init(struct ssd1307fb_par *par) +{ + struct pwm_state pwmstate; + int ret; + u32 precharge, dclk, com_invdir, compins; + + if (par->device_info->need_pwm) { + par->pwm = pwm_get(&par->client->dev, NULL); + if (IS_ERR(par->pwm)) { + dev_err(&par->client->dev, "Could not get PWM from device tree!\n"); + return PTR_ERR(par->pwm); + } + + pwm_init_state(par->pwm, &pwmstate); + pwm_set_relative_duty_cycle(&pwmstate, 50, 100); + pwm_apply_state(par->pwm, &pwmstate); + + /* Enable the PWM */ + pwm_enable(par->pwm); + + dev_dbg(&par->client->dev, "Using PWM%d with a %lluns period.\n", + par->pwm->pwm, pwm_get_period(par->pwm)); + } + + /* Set initial contrast */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, par->contrast); + if (ret < 0) + return ret; + + /* Set segment re-map */ + if (par->seg_remap) { + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON); + if (ret < 0) + return ret; + } + + /* Set COM direction */ + com_invdir = 0xc0 | par->com_invdir << 3; + ret = ssd1307fb_write_cmd(par->client, com_invdir); + if (ret < 0) + return ret; + + /* Set multiplex ratio value */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_MULTIPLEX_RATIO); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, par->height - 1); + if (ret < 0) + return ret; + + /* set display offset value */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_DISPLAY_OFFSET); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, par->com_offset); + if (ret < 0) + return ret; + + /* Set clock frequency */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_CLOCK_FREQ); + if (ret < 0) + return ret; + + dclk = ((par->dclk_div - 1) & 0xf) | (par->dclk_frq & 0xf) << 4; + ret = ssd1307fb_write_cmd(par->client, dclk); + if (ret < 0) + return ret; + + /* Set Area Color Mode ON/OFF & Low Power Display Mode */ + if (par->area_color_enable || par->low_power) { + u32 mode; + + ret = ssd1307fb_write_cmd(par->client, + SSD1307FB_SET_AREA_COLOR_MODE); + if (ret < 0) + return ret; + + mode = (par->area_color_enable ? 0x30 : 0) | + (par->low_power ? 5 : 0); + ret = ssd1307fb_write_cmd(par->client, mode); + if (ret < 0) + return ret; + } + + /* Set precharge period in number of ticks from the internal clock */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PRECHARGE_PERIOD); + if (ret < 0) + return ret; + + precharge = (par->prechargep1 & 0xf) | (par->prechargep2 & 0xf) << 4; + ret = ssd1307fb_write_cmd(par->client, precharge); + if (ret < 0) + return ret; + + /* Set COM pins configuration */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COM_PINS_CONFIG); + if (ret < 0) + return ret; + + compins = 0x02 | !par->com_seq << 4 | par->com_lrremap << 5; + ret = ssd1307fb_write_cmd(par->client, compins); + if (ret < 0) + return ret; + + /* Set VCOMH */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_VCOMH); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, par->vcomh); + if (ret < 0) + return ret; + + /* Turn on the DC-DC Charge Pump */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, + BIT(4) | (par->device_info->need_chargepump ? BIT(2) : 0)); + if (ret < 0) + return ret; + + /* Set lookup table */ + if (par->lookup_table_set) { + int i; + + ret = ssd1307fb_write_cmd(par->client, + SSD1307FB_SET_LOOKUP_TABLE); + if (ret < 0) + return ret; + + for (i = 0; i < ARRAY_SIZE(par->lookup_table); ++i) { + u8 val = par->lookup_table[i]; + + if (val < 31 || val > 63) + dev_warn(&par->client->dev, + "lookup table index %d value out of range 31 <= %d <= 63\n", + i, val); + ret = ssd1307fb_write_cmd(par->client, val); + if (ret < 0) + return ret; + } + } + + /* Switch to horizontal addressing mode */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, + SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL); + if (ret < 0) + return ret; + + /* Clear the screen */ + ret = ssd1307fb_update_display(par); + if (ret < 0) + return ret; + + /* Turn on the display */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON); + if (ret < 0) + return ret; + + return 0; +} + +static int ssd1307fb_update_bl(struct backlight_device *bdev) +{ + struct ssd1307fb_par *par = bl_get_data(bdev); + int ret; + int brightness = bdev->props.brightness; + + par->contrast = brightness; + + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST); + if (ret < 0) + return ret; + ret = ssd1307fb_write_cmd(par->client, par->contrast); + if (ret < 0) + return ret; + return 0; +} + +static int ssd1307fb_get_brightness(struct backlight_device *bdev) +{ + struct ssd1307fb_par *par = bl_get_data(bdev); + + return par->contrast; +} + +static int ssd1307fb_check_fb(struct backlight_device *bdev, + struct fb_info *info) +{ + return (info->bl_dev == bdev); +} + +static const struct backlight_ops ssd1307fb_bl_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = ssd1307fb_update_bl, + .get_brightness = ssd1307fb_get_brightness, + .check_fb = ssd1307fb_check_fb, +}; + +static struct ssd1307fb_deviceinfo ssd1307fb_ssd1305_deviceinfo = { + .default_vcomh = 0x34, + .default_dclk_div = 1, + .default_dclk_frq = 7, +}; + +static struct ssd1307fb_deviceinfo ssd1307fb_ssd1306_deviceinfo = { + .default_vcomh = 0x20, + .default_dclk_div = 1, + .default_dclk_frq = 8, + .need_chargepump = 1, +}; + +static struct ssd1307fb_deviceinfo ssd1307fb_ssd1307_deviceinfo = { + .default_vcomh = 0x20, + .default_dclk_div = 2, + .default_dclk_frq = 12, + .need_pwm = 1, +}; + +static struct ssd1307fb_deviceinfo ssd1307fb_ssd1309_deviceinfo = { + .default_vcomh = 0x34, + .default_dclk_div = 1, + .default_dclk_frq = 10, +}; + +static const struct of_device_id ssd1307fb_of_match[] = { + { + .compatible = "solomon,ssd1305fb-i2c", + .data = (void *)&ssd1307fb_ssd1305_deviceinfo, + }, + { + .compatible = "solomon,ssd1306fb-i2c", + .data = (void *)&ssd1307fb_ssd1306_deviceinfo, + }, + { + .compatible = "solomon,ssd1307fb-i2c", + .data = (void *)&ssd1307fb_ssd1307_deviceinfo, + }, + { + .compatible = "solomon,ssd1309fb-i2c", + .data = (void *)&ssd1307fb_ssd1309_deviceinfo, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, ssd1307fb_of_match); + +static int ssd1307fb_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct backlight_device *bl; + char bl_name[12]; + struct fb_info *info; + struct fb_deferred_io *ssd1307fb_defio; + u32 vmem_size; + struct ssd1307fb_par *par; + void *vmem; + int ret; + + info = framebuffer_alloc(sizeof(struct ssd1307fb_par), dev); + if (!info) + return -ENOMEM; + + par = info->par; + par->info = info; + par->client = client; + + par->device_info = device_get_match_data(dev); + + par->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(par->reset)) { + ret = dev_err_probe(dev, PTR_ERR(par->reset), + "failed to get reset gpio\n"); + goto fb_alloc_error; + } + + par->vbat_reg = devm_regulator_get_optional(dev, "vbat"); + if (IS_ERR(par->vbat_reg)) { + ret = PTR_ERR(par->vbat_reg); + if (ret == -ENODEV) { + par->vbat_reg = NULL; + } else { + dev_err_probe(dev, ret, "failed to get VBAT regulator\n"); + goto fb_alloc_error; + } + } + + if (device_property_read_u32(dev, "solomon,width", &par->width)) + par->width = 96; + + if (device_property_read_u32(dev, "solomon,height", &par->height)) + par->height = 16; + + if (device_property_read_u32(dev, "solomon,page-offset", &par->page_offset)) + par->page_offset = 1; + + if (device_property_read_u32(dev, "solomon,col-offset", &par->col_offset)) + par->col_offset = 0; + + if (device_property_read_u32(dev, "solomon,com-offset", &par->com_offset)) + par->com_offset = 0; + + if (device_property_read_u32(dev, "solomon,prechargep1", &par->prechargep1)) + par->prechargep1 = 2; + + if (device_property_read_u32(dev, "solomon,prechargep2", &par->prechargep2)) + par->prechargep2 = 2; + + if (!device_property_read_u8_array(dev, "solomon,lookup-table", + par->lookup_table, + ARRAY_SIZE(par->lookup_table))) + par->lookup_table_set = 1; + + par->seg_remap = !device_property_read_bool(dev, "solomon,segment-no-remap"); + par->com_seq = device_property_read_bool(dev, "solomon,com-seq"); + par->com_lrremap = device_property_read_bool(dev, "solomon,com-lrremap"); + par->com_invdir = device_property_read_bool(dev, "solomon,com-invdir"); + par->area_color_enable = + device_property_read_bool(dev, "solomon,area-color-enable"); + par->low_power = device_property_read_bool(dev, "solomon,low-power"); + + par->contrast = 127; + par->vcomh = par->device_info->default_vcomh; + + /* Setup display timing */ + if (device_property_read_u32(dev, "solomon,dclk-div", &par->dclk_div)) + par->dclk_div = par->device_info->default_dclk_div; + if (device_property_read_u32(dev, "solomon,dclk-frq", &par->dclk_frq)) + par->dclk_frq = par->device_info->default_dclk_frq; + + vmem_size = DIV_ROUND_UP(par->width, 8) * par->height; + + vmem = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, + get_order(vmem_size)); + if (!vmem) { + dev_err(dev, "Couldn't allocate graphical memory.\n"); + ret = -ENOMEM; + goto fb_alloc_error; + } + + ssd1307fb_defio = devm_kzalloc(dev, sizeof(*ssd1307fb_defio), + GFP_KERNEL); + if (!ssd1307fb_defio) { + dev_err(dev, "Couldn't allocate deferred io.\n"); + ret = -ENOMEM; + goto fb_alloc_error; + } + + ssd1307fb_defio->delay = HZ / refreshrate; + ssd1307fb_defio->deferred_io = ssd1307fb_deferred_io; + + info->fbops = &ssd1307fb_ops; + info->fix = ssd1307fb_fix; + info->fix.line_length = DIV_ROUND_UP(par->width, 8); + info->fbdefio = ssd1307fb_defio; + + info->var = ssd1307fb_var; + info->var.xres = par->width; + info->var.xres_virtual = par->width; + info->var.yres = par->height; + info->var.yres_virtual = par->height; + + info->screen_buffer = vmem; + info->fix.smem_start = __pa(vmem); + info->fix.smem_len = vmem_size; + + fb_deferred_io_init(info); + + i2c_set_clientdata(client, info); + + if (par->reset) { + /* Reset the screen */ + gpiod_set_value_cansleep(par->reset, 1); + udelay(4); + gpiod_set_value_cansleep(par->reset, 0); + udelay(4); + } + + if (par->vbat_reg) { + ret = regulator_enable(par->vbat_reg); + if (ret) { + dev_err(dev, "failed to enable VBAT: %d\n", ret); + goto reset_oled_error; + } + } + + ret = ssd1307fb_init(par); + if (ret) + goto regulator_enable_error; + + ret = register_framebuffer(info); + if (ret) { + dev_err(dev, "Couldn't register the framebuffer\n"); + goto panel_init_error; + } + + snprintf(bl_name, sizeof(bl_name), "ssd1307fb%d", info->node); + bl = backlight_device_register(bl_name, dev, par, &ssd1307fb_bl_ops, + NULL); + if (IS_ERR(bl)) { + ret = PTR_ERR(bl); + dev_err(dev, "unable to register backlight device: %d\n", ret); + goto bl_init_error; + } + + bl->props.brightness = par->contrast; + bl->props.max_brightness = MAX_CONTRAST; + info->bl_dev = bl; + + dev_info(dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size); + + return 0; + +bl_init_error: + unregister_framebuffer(info); +panel_init_error: + if (par->device_info->need_pwm) { + pwm_disable(par->pwm); + pwm_put(par->pwm); + } +regulator_enable_error: + if (par->vbat_reg) + regulator_disable(par->vbat_reg); +reset_oled_error: + fb_deferred_io_cleanup(info); +fb_alloc_error: + framebuffer_release(info); + return ret; +} + +static void ssd1307fb_remove(struct i2c_client *client) +{ + struct fb_info *info = i2c_get_clientdata(client); + struct ssd1307fb_par *par = info->par; + + ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_OFF); + + backlight_device_unregister(info->bl_dev); + + unregister_framebuffer(info); + if (par->device_info->need_pwm) { + pwm_disable(par->pwm); + pwm_put(par->pwm); + } + if (par->vbat_reg) + regulator_disable(par->vbat_reg); + fb_deferred_io_cleanup(info); + __free_pages(__va(info->fix.smem_start), get_order(info->fix.smem_len)); + framebuffer_release(info); +} + +static const struct i2c_device_id ssd1307fb_i2c_id[] = { + { "ssd1305fb", 0 }, + { "ssd1306fb", 0 }, + { "ssd1307fb", 0 }, + { "ssd1309fb", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ssd1307fb_i2c_id); + +static struct i2c_driver ssd1307fb_driver = { + .probe_new = ssd1307fb_probe, + .remove = ssd1307fb_remove, + .id_table = ssd1307fb_i2c_id, + .driver = { + .name = "ssd1307fb", + .of_match_table = ssd1307fb_of_match, + }, +}; + +module_i2c_driver(ssd1307fb_driver); + +MODULE_DESCRIPTION("FB driver for the Solomon SSD1307 OLED controller"); +MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); +MODULE_LICENSE("GPL"); |