diff options
Diffstat (limited to 'fs/pstore/Kconfig')
| -rw-r--r-- | fs/pstore/Kconfig | 273 |
1 files changed, 273 insertions, 0 deletions
diff --git a/fs/pstore/Kconfig b/fs/pstore/Kconfig new file mode 100644 index 000000000..c49d554cc --- /dev/null +++ b/fs/pstore/Kconfig @@ -0,0 +1,273 @@ +# SPDX-License-Identifier: GPL-2.0-only +config PSTORE + tristate "Persistent store support" + select CRYPTO if PSTORE_COMPRESS + default n + help + This option enables generic access to platform level + persistent storage via "pstore" filesystem that can + be mounted as /dev/pstore. Only useful if you have + a platform level driver that registers with pstore to + provide the data, so you probably should just go say "Y" + (or "M") to a platform specific persistent store driver + (e.g. ACPI_APEI on X86) which will select this for you. + If you don't have a platform persistent store driver, + say N. + +config PSTORE_DEFAULT_KMSG_BYTES + int "Default kernel log storage space" if EXPERT + depends on PSTORE + default "10240" + help + Defines default size of pstore kernel log storage. + Can be enlarged if needed, not recommended to shrink it. + +config PSTORE_DEFLATE_COMPRESS + tristate "DEFLATE (ZLIB) compression" + default y + depends on PSTORE + select CRYPTO_DEFLATE + help + This option enables DEFLATE (also known as ZLIB) compression + algorithm support. + +config PSTORE_LZO_COMPRESS + tristate "LZO compression" + depends on PSTORE + select CRYPTO_LZO + help + This option enables LZO compression algorithm support. + +config PSTORE_LZ4_COMPRESS + tristate "LZ4 compression" + depends on PSTORE + select CRYPTO_LZ4 + help + This option enables LZ4 compression algorithm support. + +config PSTORE_LZ4HC_COMPRESS + tristate "LZ4HC compression" + depends on PSTORE + select CRYPTO_LZ4HC + help + This option enables LZ4HC (high compression) mode algorithm. + +config PSTORE_842_COMPRESS + bool "842 compression" + depends on PSTORE + select CRYPTO_842 + help + This option enables 842 compression algorithm support. + +config PSTORE_ZSTD_COMPRESS + bool "zstd compression" + depends on PSTORE + select CRYPTO_ZSTD + help + This option enables zstd compression algorithm support. + +config PSTORE_COMPRESS + def_bool y + depends on PSTORE + depends on PSTORE_DEFLATE_COMPRESS || PSTORE_LZO_COMPRESS || \ + PSTORE_LZ4_COMPRESS || PSTORE_LZ4HC_COMPRESS || \ + PSTORE_842_COMPRESS || PSTORE_ZSTD_COMPRESS + +choice + prompt "Default pstore compression algorithm" + depends on PSTORE_COMPRESS + help + This option chooses the default active compression algorithm. + This change be changed at boot with "pstore.compress=..." on + the kernel command line. + + Currently, pstore has support for 6 compression algorithms: + deflate, lzo, lz4, lz4hc, 842 and zstd. + + The default compression algorithm is deflate. + + config PSTORE_DEFLATE_COMPRESS_DEFAULT + bool "deflate" if PSTORE_DEFLATE_COMPRESS + + config PSTORE_LZO_COMPRESS_DEFAULT + bool "lzo" if PSTORE_LZO_COMPRESS + + config PSTORE_LZ4_COMPRESS_DEFAULT + bool "lz4" if PSTORE_LZ4_COMPRESS + + config PSTORE_LZ4HC_COMPRESS_DEFAULT + bool "lz4hc" if PSTORE_LZ4HC_COMPRESS + + config PSTORE_842_COMPRESS_DEFAULT + bool "842" if PSTORE_842_COMPRESS + + config PSTORE_ZSTD_COMPRESS_DEFAULT + bool "zstd" if PSTORE_ZSTD_COMPRESS + +endchoice + +config PSTORE_COMPRESS_DEFAULT + string + depends on PSTORE_COMPRESS + default "deflate" if PSTORE_DEFLATE_COMPRESS_DEFAULT + default "lzo" if PSTORE_LZO_COMPRESS_DEFAULT + default "lz4" if PSTORE_LZ4_COMPRESS_DEFAULT + default "lz4hc" if PSTORE_LZ4HC_COMPRESS_DEFAULT + default "842" if PSTORE_842_COMPRESS_DEFAULT + default "zstd" if PSTORE_ZSTD_COMPRESS_DEFAULT + +config PSTORE_CONSOLE + bool "Log kernel console messages" + depends on PSTORE + help + When the option is enabled, pstore will log all kernel + messages, even if no oops or panic happened. + +config PSTORE_PMSG + bool "Log user space messages" + depends on PSTORE + select RT_MUTEXES + help + When the option is enabled, pstore will export a character + interface /dev/pmsg0 to log user space messages. On reboot + data can be retrieved from /sys/fs/pstore/pmsg-ramoops-[ID]. + + If unsure, say N. + +config PSTORE_FTRACE + bool "Persistent function tracer" + depends on PSTORE + depends on FUNCTION_TRACER + depends on DEBUG_FS + help + With this option kernel traces function calls into a persistent + ram buffer that can be decoded and dumped after reboot through + pstore filesystem. It can be used to determine what function + was last called before a reset or panic. + + If unsure, say N. + +config PSTORE_RAM + tristate "Log panic/oops to a RAM buffer" + depends on PSTORE + depends on HAS_IOMEM + select REED_SOLOMON + select REED_SOLOMON_ENC8 + select REED_SOLOMON_DEC8 + help + This enables panic and oops messages to be logged to a circular + buffer in RAM where it can be read back at some later point. + + Note that for historical reasons, the module will be named + "ramoops.ko". + + For more information, see Documentation/admin-guide/ramoops.rst. + +config PSTORE_ZONE + tristate + depends on PSTORE + help + The common layer for pstore/blk (and pstore/ram in the future) + to manage storage in zones. + +config PSTORE_BLK + tristate "Log panic/oops to a block device" + depends on PSTORE + depends on BLOCK + select PSTORE_ZONE + default n + help + This enables panic and oops message to be logged to a block dev + where it can be read back at some later point. + + For more information, see Documentation/admin-guide/pstore-blk.rst + + If unsure, say N. + +config PSTORE_BLK_BLKDEV + string "block device identifier" + depends on PSTORE_BLK + default "" + help + Which block device should be used for pstore/blk. + + It accepts the following variants: + 1) <hex_major><hex_minor> device number in hexadecimal representation, + with no leading 0x, for example b302. + 2) /dev/<disk_name> represents the device name of disk + 3) /dev/<disk_name><decimal> represents the device name and number + of partition - device number of disk plus the partition number + 4) /dev/<disk_name>p<decimal> - same as the above, this form is + used when disk name of partitioned disk ends with a digit. + 5) PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF representing the + unique id of a partition if the partition table provides it. + The UUID may be either an EFI/GPT UUID, or refer to an MSDOS + partition using the format SSSSSSSS-PP, where SSSSSSSS is a zero- + filled hex representation of the 32-bit "NT disk signature", and PP + is a zero-filled hex representation of the 1-based partition number. + 6) PARTUUID=<UUID>/PARTNROFF=<int> to select a partition in relation + to a partition with a known unique id. + 7) <major>:<minor> major and minor number of the device separated by + a colon. + + NOTE that, both Kconfig and module parameters can configure + pstore/blk, but module parameters have priority over Kconfig. + +config PSTORE_BLK_KMSG_SIZE + int "Size in Kbytes of kmsg dump log to store" + depends on PSTORE_BLK + default 64 + help + This just sets size of kmsg dump (oops, panic, etc) log for + pstore/blk. The size is in KB and must be a multiple of 4. + + NOTE that, both Kconfig and module parameters can configure + pstore/blk, but module parameters have priority over Kconfig. + +config PSTORE_BLK_MAX_REASON + int "Maximum kmsg dump reason to store" + depends on PSTORE_BLK + default 2 + help + The maximum reason for kmsg dumps to store. The default is + 2 (KMSG_DUMP_OOPS), see include/linux/kmsg_dump.h's + enum kmsg_dump_reason for more details. + + NOTE that, both Kconfig and module parameters can configure + pstore/blk, but module parameters have priority over Kconfig. + +config PSTORE_BLK_PMSG_SIZE + int "Size in Kbytes of pmsg to store" + depends on PSTORE_BLK + depends on PSTORE_PMSG + default 64 + help + This just sets size of pmsg (pmsg_size) for pstore/blk. The size is + in KB and must be a multiple of 4. + + NOTE that, both Kconfig and module parameters can configure + pstore/blk, but module parameters have priority over Kconfig. + +config PSTORE_BLK_CONSOLE_SIZE + int "Size in Kbytes of console log to store" + depends on PSTORE_BLK + depends on PSTORE_CONSOLE + default 64 + help + This just sets size of console log (console_size) to store via + pstore/blk. The size is in KB and must be a multiple of 4. + + NOTE that, both Kconfig and module parameters can configure + pstore/blk, but module parameters have priority over Kconfig. + +config PSTORE_BLK_FTRACE_SIZE + int "Size in Kbytes of ftrace log to store" + depends on PSTORE_BLK + depends on PSTORE_FTRACE + default 64 + help + This just sets size of ftrace log (ftrace_size) for pstore/blk. The + size is in KB and must be a multiple of 4. + + NOTE that, both Kconfig and module parameters can configure + pstore/blk, but module parameters have priority over Kconfig. |