diff options
Diffstat (limited to 'include/clocksource')
| -rw-r--r-- | include/clocksource/arm_arch_timer.h | 111 | ||||
| -rw-r--r-- | include/clocksource/hyperv_timer.h | 112 | ||||
| -rw-r--r-- | include/clocksource/pxa.h | 13 | ||||
| -rw-r--r-- | include/clocksource/samsung_pwm.h | 33 | ||||
| -rw-r--r-- | include/clocksource/timer-davinci.h | 44 | ||||
| -rw-r--r-- | include/clocksource/timer-goldfish.h | 31 | ||||
| -rw-r--r-- | include/clocksource/timer-riscv.h | 16 | ||||
| -rw-r--r-- | include/clocksource/timer-ti-dm.h | 138 | ||||
| -rw-r--r-- | include/clocksource/timer-xilinx.h | 73 |
9 files changed, 571 insertions, 0 deletions
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h new file mode 100644 index 000000000..057c8964a --- /dev/null +++ b/include/clocksource/arm_arch_timer.h @@ -0,0 +1,111 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2012 ARM Ltd. + */ +#ifndef __CLKSOURCE_ARM_ARCH_TIMER_H +#define __CLKSOURCE_ARM_ARCH_TIMER_H + +#include <linux/bitops.h> +#include <linux/timecounter.h> +#include <linux/types.h> + +#define ARCH_TIMER_TYPE_CP15 BIT(0) +#define ARCH_TIMER_TYPE_MEM BIT(1) + +#define ARCH_TIMER_CTRL_ENABLE (1 << 0) +#define ARCH_TIMER_CTRL_IT_MASK (1 << 1) +#define ARCH_TIMER_CTRL_IT_STAT (1 << 2) + +#define CNTHCTL_EL1PCTEN (1 << 0) +#define CNTHCTL_EL1PCEN (1 << 1) +#define CNTHCTL_EVNTEN (1 << 2) +#define CNTHCTL_EVNTDIR (1 << 3) +#define CNTHCTL_EVNTI (0xF << 4) + +enum arch_timer_reg { + ARCH_TIMER_REG_CTRL, + ARCH_TIMER_REG_CVAL, +}; + +enum arch_timer_ppi_nr { + ARCH_TIMER_PHYS_SECURE_PPI, + ARCH_TIMER_PHYS_NONSECURE_PPI, + ARCH_TIMER_VIRT_PPI, + ARCH_TIMER_HYP_PPI, + ARCH_TIMER_HYP_VIRT_PPI, + ARCH_TIMER_MAX_TIMER_PPI +}; + +enum arch_timer_spi_nr { + ARCH_TIMER_PHYS_SPI, + ARCH_TIMER_VIRT_SPI, + ARCH_TIMER_MAX_TIMER_SPI +}; + +#define ARCH_TIMER_PHYS_ACCESS 0 +#define ARCH_TIMER_VIRT_ACCESS 1 +#define ARCH_TIMER_MEM_PHYS_ACCESS 2 +#define ARCH_TIMER_MEM_VIRT_ACCESS 3 + +#define ARCH_TIMER_MEM_MAX_FRAMES 8 + +#define ARCH_TIMER_USR_PCT_ACCESS_EN (1 << 0) /* physical counter */ +#define ARCH_TIMER_USR_VCT_ACCESS_EN (1 << 1) /* virtual counter */ +#define ARCH_TIMER_VIRT_EVT_EN (1 << 2) +#define ARCH_TIMER_EVT_TRIGGER_SHIFT (4) +#define ARCH_TIMER_EVT_TRIGGER_MASK (0xF << ARCH_TIMER_EVT_TRIGGER_SHIFT) +#define ARCH_TIMER_USR_VT_ACCESS_EN (1 << 8) /* virtual timer registers */ +#define ARCH_TIMER_USR_PT_ACCESS_EN (1 << 9) /* physical timer registers */ +#define ARCH_TIMER_EVT_INTERVAL_SCALE (1 << 17) /* EVNTIS in the ARMv8 ARM */ + +#define ARCH_TIMER_EVT_STREAM_PERIOD_US 100 +#define ARCH_TIMER_EVT_STREAM_FREQ \ + (USEC_PER_SEC / ARCH_TIMER_EVT_STREAM_PERIOD_US) + +struct arch_timer_kvm_info { + struct timecounter timecounter; + int virtual_irq; + int physical_irq; +}; + +struct arch_timer_mem_frame { + bool valid; + phys_addr_t cntbase; + size_t size; + int phys_irq; + int virt_irq; +}; + +struct arch_timer_mem { + phys_addr_t cntctlbase; + size_t size; + struct arch_timer_mem_frame frame[ARCH_TIMER_MEM_MAX_FRAMES]; +}; + +#ifdef CONFIG_ARM_ARCH_TIMER + +extern u32 arch_timer_get_rate(void); +extern u64 (*arch_timer_read_counter)(void); +extern struct arch_timer_kvm_info *arch_timer_get_kvm_info(void); +extern bool arch_timer_evtstrm_available(void); + +#else + +static inline u32 arch_timer_get_rate(void) +{ + return 0; +} + +static inline u64 arch_timer_read_counter(void) +{ + return 0; +} + +static inline bool arch_timer_evtstrm_available(void) +{ + return false; +} + +#endif + +#endif diff --git a/include/clocksource/hyperv_timer.h b/include/clocksource/hyperv_timer.h new file mode 100644 index 000000000..b3f5d73ae --- /dev/null +++ b/include/clocksource/hyperv_timer.h @@ -0,0 +1,112 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* + * Definitions for the clocksource provided by the Hyper-V + * hypervisor to guest VMs, as described in the Hyper-V Top + * Level Functional Spec (TLFS). + * + * Copyright (C) 2019, Microsoft, Inc. + * + * Author: Michael Kelley <mikelley@microsoft.com> + */ + +#ifndef __CLKSOURCE_HYPERV_TIMER_H +#define __CLKSOURCE_HYPERV_TIMER_H + +#include <linux/clocksource.h> +#include <linux/math64.h> +#include <asm/mshyperv.h> + +#define HV_MAX_MAX_DELTA_TICKS 0xffffffff +#define HV_MIN_DELTA_TICKS 1 + +#ifdef CONFIG_HYPERV_TIMER + +/* Routines called by the VMbus driver */ +extern int hv_stimer_alloc(bool have_percpu_irqs); +extern int hv_stimer_cleanup(unsigned int cpu); +extern void hv_stimer_legacy_init(unsigned int cpu, int sint); +extern void hv_stimer_legacy_cleanup(unsigned int cpu); +extern void hv_stimer_global_cleanup(void); +extern void hv_stimer0_isr(void); + +extern void hv_init_clocksource(void); + +extern struct ms_hyperv_tsc_page *hv_get_tsc_page(void); + +static inline notrace u64 +hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg, u64 *cur_tsc) +{ + u64 scale, offset; + u32 sequence; + + /* + * The protocol for reading Hyper-V TSC page is specified in Hypervisor + * Top-Level Functional Specification ver. 3.0 and above. To get the + * reference time we must do the following: + * - READ ReferenceTscSequence + * A special '0' value indicates the time source is unreliable and we + * need to use something else. The currently published specification + * versions (up to 4.0b) contain a mistake and wrongly claim '-1' + * instead of '0' as the special value, see commit c35b82ef0294. + * - ReferenceTime = + * ((RDTSC() * ReferenceTscScale) >> 64) + ReferenceTscOffset + * - READ ReferenceTscSequence again. In case its value has changed + * since our first reading we need to discard ReferenceTime and repeat + * the whole sequence as the hypervisor was updating the page in + * between. + */ + do { + sequence = READ_ONCE(tsc_pg->tsc_sequence); + if (!sequence) + return U64_MAX; + /* + * Make sure we read sequence before we read other values from + * TSC page. + */ + smp_rmb(); + + scale = READ_ONCE(tsc_pg->tsc_scale); + offset = READ_ONCE(tsc_pg->tsc_offset); + *cur_tsc = hv_get_raw_timer(); + + /* + * Make sure we read sequence after we read all other values + * from TSC page. + */ + smp_rmb(); + + } while (READ_ONCE(tsc_pg->tsc_sequence) != sequence); + + return mul_u64_u64_shr(*cur_tsc, scale, 64) + offset; +} + +static inline notrace u64 +hv_read_tsc_page(const struct ms_hyperv_tsc_page *tsc_pg) +{ + u64 cur_tsc; + + return hv_read_tsc_page_tsc(tsc_pg, &cur_tsc); +} + +#else /* CONFIG_HYPERV_TIMER */ +static inline struct ms_hyperv_tsc_page *hv_get_tsc_page(void) +{ + return NULL; +} + +static inline u64 hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg, + u64 *cur_tsc) +{ + return U64_MAX; +} + +static inline int hv_stimer_cleanup(unsigned int cpu) { return 0; } +static inline void hv_stimer_legacy_init(unsigned int cpu, int sint) {} +static inline void hv_stimer_legacy_cleanup(unsigned int cpu) {} +static inline void hv_stimer_global_cleanup(void) {} +static inline void hv_stimer0_isr(void) {} + +#endif /* CONFIG_HYPERV_TIMER */ + +#endif diff --git a/include/clocksource/pxa.h b/include/clocksource/pxa.h new file mode 100644 index 000000000..0cfe7b9fd --- /dev/null +++ b/include/clocksource/pxa.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * PXA clocksource, clockevents, and OST interrupt handlers. + * + * Copyright (C) 2014 Robert Jarzmik + */ + +#ifndef _CLOCKSOURCE_PXA_H +#define _CLOCKSOURCE_PXA_H + +extern void pxa_timer_nodt_init(int irq, void __iomem *base); + +#endif diff --git a/include/clocksource/samsung_pwm.h b/include/clocksource/samsung_pwm.h new file mode 100644 index 000000000..9b435caa9 --- /dev/null +++ b/include/clocksource/samsung_pwm.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + */ +#ifndef __CLOCKSOURCE_SAMSUNG_PWM_H +#define __CLOCKSOURCE_SAMSUNG_PWM_H + +#include <linux/spinlock.h> + +#define SAMSUNG_PWM_NUM 5 + +/* + * Following declaration must be in an ifdef due to this symbol being static + * in pwm-samsung driver if the clocksource driver is not compiled in and the + * spinlock is not shared between both drivers. + */ +#ifdef CONFIG_CLKSRC_SAMSUNG_PWM +extern spinlock_t samsung_pwm_lock; +#endif + +struct samsung_pwm_variant { + u8 bits; + u8 div_base; + u8 tclk_mask; + u8 output_mask; + bool has_tint_cstat; +}; + +void samsung_pwm_clocksource_init(void __iomem *base, + unsigned int *irqs, + const struct samsung_pwm_variant *variant); + +#endif /* __CLOCKSOURCE_SAMSUNG_PWM_H */ diff --git a/include/clocksource/timer-davinci.h b/include/clocksource/timer-davinci.h new file mode 100644 index 000000000..1dcc1333f --- /dev/null +++ b/include/clocksource/timer-davinci.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * TI DaVinci clocksource driver + * + * Copyright (C) 2019 Texas Instruments + * Author: Bartosz Golaszewski <bgolaszewski@baylibre.com> + */ + +#ifndef __TIMER_DAVINCI_H__ +#define __TIMER_DAVINCI_H__ + +#include <linux/clk.h> +#include <linux/ioport.h> + +enum { + DAVINCI_TIMER_CLOCKEVENT_IRQ, + DAVINCI_TIMER_CLOCKSOURCE_IRQ, + DAVINCI_TIMER_NUM_IRQS, +}; + +/** + * struct davinci_timer_cfg - davinci clocksource driver configuration struct + * @reg: register range resource + * @irq: clockevent and clocksource interrupt resources + * @cmp_off: if set - it specifies the compare register used for clockevent + * + * Note: if the compare register is specified, the driver will use the bottom + * clock half for both clocksource and clockevent and the compare register + * to generate event irqs. The user must supply the correct compare register + * interrupt number. + * + * This is only used by da830 the DSP of which uses the top half. The timer + * driver still configures the top half to run in free-run mode. + */ +struct davinci_timer_cfg { + struct resource reg; + struct resource irq[DAVINCI_TIMER_NUM_IRQS]; + unsigned int cmp_off; +}; + +int __init davinci_timer_register(struct clk *clk, + const struct davinci_timer_cfg *data); + +#endif /* __TIMER_DAVINCI_H__ */ diff --git a/include/clocksource/timer-goldfish.h b/include/clocksource/timer-goldfish.h new file mode 100644 index 000000000..05a3a4f61 --- /dev/null +++ b/include/clocksource/timer-goldfish.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * goldfish-timer clocksource + * Registers definition for the goldfish-timer device + */ + +#ifndef _CLOCKSOURCE_TIMER_GOLDFISH_H +#define _CLOCKSOURCE_TIMER_GOLDFISH_H + +/* + * TIMER_TIME_LOW get low bits of current time and update TIMER_TIME_HIGH + * TIMER_TIME_HIGH get high bits of time at last TIMER_TIME_LOW read + * TIMER_ALARM_LOW set low bits of alarm and activate it + * TIMER_ALARM_HIGH set high bits of next alarm + * TIMER_IRQ_ENABLED enable alarm interrupt + * TIMER_CLEAR_ALARM disarm an existing alarm + * TIMER_ALARM_STATUS alarm status (running or not) + * TIMER_CLEAR_INTERRUPT clear interrupt + */ +#define TIMER_TIME_LOW 0x00 +#define TIMER_TIME_HIGH 0x04 +#define TIMER_ALARM_LOW 0x08 +#define TIMER_ALARM_HIGH 0x0c +#define TIMER_IRQ_ENABLED 0x10 +#define TIMER_CLEAR_ALARM 0x14 +#define TIMER_ALARM_STATUS 0x18 +#define TIMER_CLEAR_INTERRUPT 0x1c + +extern int goldfish_timer_init(int irq, void __iomem *base); + +#endif /* _CLOCKSOURCE_TIMER_GOLDFISH_H */ diff --git a/include/clocksource/timer-riscv.h b/include/clocksource/timer-riscv.h new file mode 100644 index 000000000..d7f455754 --- /dev/null +++ b/include/clocksource/timer-riscv.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2019 Western Digital Corporation or its affiliates. + * + * Authors: + * Atish Patra <atish.patra@wdc.com> + */ + +#ifndef __TIMER_RISCV_H +#define __TIMER_RISCV_H + +#include <linux/types.h> + +extern void riscv_cs_get_mult_shift(u32 *mult, u32 *shift); + +#endif diff --git a/include/clocksource/timer-ti-dm.h b/include/clocksource/timer-ti-dm.h new file mode 100644 index 000000000..77eceeae7 --- /dev/null +++ b/include/clocksource/timer-ti-dm.h @@ -0,0 +1,138 @@ +/* + * OMAP Dual-Mode Timers + * + * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/ + * Tarun Kanti DebBarma <tarun.kanti@ti.com> + * Thara Gopinath <thara@ti.com> + * + * Platform device conversion and hwmod support. + * + * Copyright (C) 2005 Nokia Corporation + * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com> + * PWM and clock framwork support by Timo Teras. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/platform_device.h> + +#ifndef __CLOCKSOURCE_DMTIMER_H +#define __CLOCKSOURCE_DMTIMER_H + +/* clock sources */ +#define OMAP_TIMER_SRC_SYS_CLK 0x00 +#define OMAP_TIMER_SRC_32_KHZ 0x01 +#define OMAP_TIMER_SRC_EXT_CLK 0x02 + +/* timer interrupt enable bits */ +#define OMAP_TIMER_INT_CAPTURE (1 << 2) +#define OMAP_TIMER_INT_OVERFLOW (1 << 1) +#define OMAP_TIMER_INT_MATCH (1 << 0) + +/* trigger types */ +#define OMAP_TIMER_TRIGGER_NONE 0x00 +#define OMAP_TIMER_TRIGGER_OVERFLOW 0x01 +#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 + +/* timer capabilities used in hwmod database */ +#define OMAP_TIMER_SECURE 0x80000000 +#define OMAP_TIMER_ALWON 0x40000000 +#define OMAP_TIMER_HAS_PWM 0x20000000 +#define OMAP_TIMER_NEEDS_RESET 0x10000000 +#define OMAP_TIMER_HAS_DSP_IRQ 0x08000000 + +struct omap_dm_timer { +}; + +int omap_dm_timer_get_irq(struct omap_dm_timer *timer); + +u32 omap_dm_timer_modify_idlect_mask(u32 inputmask); + +/* + * Do not use the defines below, they are not needed. They should be only + * used by dmtimer.c and sys_timer related code. + */ + +/* + * The interrupt registers are different between v1 and v2 ip. + * These registers are offsets from timer->iobase. + */ +#define OMAP_TIMER_ID_OFFSET 0x00 +#define OMAP_TIMER_OCP_CFG_OFFSET 0x10 + +#define OMAP_TIMER_V1_SYS_STAT_OFFSET 0x14 +#define OMAP_TIMER_V1_STAT_OFFSET 0x18 +#define OMAP_TIMER_V1_INT_EN_OFFSET 0x1c + +#define OMAP_TIMER_V2_IRQSTATUS_RAW 0x24 +#define OMAP_TIMER_V2_IRQSTATUS 0x28 +#define OMAP_TIMER_V2_IRQENABLE_SET 0x2c +#define OMAP_TIMER_V2_IRQENABLE_CLR 0x30 + +/* + * The functional registers have a different base on v1 and v2 ip. + * These registers are offsets from timer->func_base. The func_base + * is samae as io_base for v1 and io_base + 0x14 for v2 ip. + * + */ +#define OMAP_TIMER_V2_FUNC_OFFSET 0x14 + +#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20 +#define _OMAP_TIMER_CTRL_OFFSET 0x24 +#define OMAP_TIMER_CTRL_GPOCFG (1 << 14) +#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13) +#define OMAP_TIMER_CTRL_PT (1 << 12) +#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8) +#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8) +#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8) +#define OMAP_TIMER_CTRL_SCPWM (1 << 7) +#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */ +#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */ +#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* prescaler value shift */ +#define OMAP_TIMER_CTRL_POSTED (1 << 2) +#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */ +#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */ +#define _OMAP_TIMER_COUNTER_OFFSET 0x28 +#define _OMAP_TIMER_LOAD_OFFSET 0x2c +#define _OMAP_TIMER_TRIGGER_OFFSET 0x30 +#define _OMAP_TIMER_WRITE_PEND_OFFSET 0x34 +#define WP_NONE 0 /* no write pending bit */ +#define WP_TCLR (1 << 0) +#define WP_TCRR (1 << 1) +#define WP_TLDR (1 << 2) +#define WP_TTGR (1 << 3) +#define WP_TMAR (1 << 4) +#define WP_TPIR (1 << 5) +#define WP_TNIR (1 << 6) +#define WP_TCVR (1 << 7) +#define WP_TOCR (1 << 8) +#define WP_TOWR (1 << 9) +#define _OMAP_TIMER_MATCH_OFFSET 0x38 +#define _OMAP_TIMER_CAPTURE_OFFSET 0x3c +#define _OMAP_TIMER_IF_CTRL_OFFSET 0x40 +#define _OMAP_TIMER_CAPTURE2_OFFSET 0x44 /* TCAR2, 34xx only */ +#define _OMAP_TIMER_TICK_POS_OFFSET 0x48 /* TPIR, 34xx only */ +#define _OMAP_TIMER_TICK_NEG_OFFSET 0x4c /* TNIR, 34xx only */ +#define _OMAP_TIMER_TICK_COUNT_OFFSET 0x50 /* TCVR, 34xx only */ +#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET 0x54 /* TOCR, 34xx only */ +#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET 0x58 /* TOWR, 34xx only */ + +#endif /* __CLOCKSOURCE_DMTIMER_H */ diff --git a/include/clocksource/timer-xilinx.h b/include/clocksource/timer-xilinx.h new file mode 100644 index 000000000..c0f56fe6d --- /dev/null +++ b/include/clocksource/timer-xilinx.h @@ -0,0 +1,73 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2021 Sean Anderson <sean.anderson@seco.com> + */ + +#ifndef XILINX_TIMER_H +#define XILINX_TIMER_H + +#include <linux/compiler.h> + +#define TCSR0 0x00 +#define TLR0 0x04 +#define TCR0 0x08 +#define TCSR1 0x10 +#define TLR1 0x14 +#define TCR1 0x18 + +#define TCSR_MDT BIT(0) +#define TCSR_UDT BIT(1) +#define TCSR_GENT BIT(2) +#define TCSR_CAPT BIT(3) +#define TCSR_ARHT BIT(4) +#define TCSR_LOAD BIT(5) +#define TCSR_ENIT BIT(6) +#define TCSR_ENT BIT(7) +#define TCSR_TINT BIT(8) +#define TCSR_PWMA BIT(9) +#define TCSR_ENALL BIT(10) +#define TCSR_CASC BIT(11) + +struct clk; +struct device_node; +struct regmap; + +/** + * struct xilinx_timer_priv - Private data for Xilinx AXI timer drivers + * @map: Regmap of the device, possibly with an offset + * @clk: Parent clock + * @max: Maximum value of the counters + */ +struct xilinx_timer_priv { + struct regmap *map; + struct clk *clk; + u32 max; +}; + +/** + * xilinx_timer_tlr_cycles() - Calculate the TLR for a period specified + * in clock cycles + * @priv: The timer's private data + * @tcsr: The value of the TCSR register for this counter + * @cycles: The number of cycles in this period + * + * Callers of this function MUST ensure that @cycles is representable as + * a TLR. + * + * Return: The calculated value for TLR + */ +u32 xilinx_timer_tlr_cycles(struct xilinx_timer_priv *priv, u32 tcsr, + u64 cycles); + +/** + * xilinx_timer_get_period() - Get the current period of a counter + * @priv: The timer's private data + * @tlr: The value of TLR for this counter + * @tcsr: The value of TCSR for this counter + * + * Return: The period, in ns + */ +unsigned int xilinx_timer_get_period(struct xilinx_timer_priv *priv, + u32 tlr, u32 tcsr); + +#endif /* XILINX_TIMER_H */ |