diff options
Diffstat (limited to 'include/drm/display/drm_dp_helper.h')
| -rw-r--r-- | include/drm/display/drm_dp_helper.h | 765 |
1 files changed, 765 insertions, 0 deletions
diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h new file mode 100644 index 000000000..ade9df59e --- /dev/null +++ b/include/drm/display/drm_dp_helper.h @@ -0,0 +1,765 @@ +/* + * Copyright © 2008 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _DRM_DP_HELPER_H_ +#define _DRM_DP_HELPER_H_ + +#include <linux/delay.h> +#include <linux/i2c.h> + +#include <drm/display/drm_dp.h> +#include <drm/drm_connector.h> + +struct drm_device; +struct drm_dp_aux; +struct drm_panel; + +bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane_count); +bool drm_dp_clock_recovery_ok(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane_count); +u8 drm_dp_get_adjust_request_voltage(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane); +u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane); +u8 drm_dp_get_adjust_tx_ffe_preset(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane); + +int drm_dp_read_clock_recovery_delay(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE], + enum drm_dp_phy dp_phy, bool uhbr); +int drm_dp_read_channel_eq_delay(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE], + enum drm_dp_phy dp_phy, bool uhbr); + +void drm_dp_link_train_clock_recovery_delay(const struct drm_dp_aux *aux, + const u8 dpcd[DP_RECEIVER_CAP_SIZE]); +void drm_dp_lttpr_link_train_clock_recovery_delay(void); +void drm_dp_link_train_channel_eq_delay(const struct drm_dp_aux *aux, + const u8 dpcd[DP_RECEIVER_CAP_SIZE]); +void drm_dp_lttpr_link_train_channel_eq_delay(const struct drm_dp_aux *aux, + const u8 caps[DP_LTTPR_PHY_CAP_SIZE]); + +int drm_dp_128b132b_read_aux_rd_interval(struct drm_dp_aux *aux); +bool drm_dp_128b132b_lane_channel_eq_done(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane_count); +bool drm_dp_128b132b_lane_symbol_locked(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane_count); +bool drm_dp_128b132b_eq_interlane_align_done(const u8 link_status[DP_LINK_STATUS_SIZE]); +bool drm_dp_128b132b_cds_interlane_align_done(const u8 link_status[DP_LINK_STATUS_SIZE]); +bool drm_dp_128b132b_link_training_failed(const u8 link_status[DP_LINK_STATUS_SIZE]); + +u8 drm_dp_link_rate_to_bw_code(int link_rate); +int drm_dp_bw_code_to_link_rate(u8 link_bw); + +const char *drm_dp_phy_name(enum drm_dp_phy dp_phy); + +/** + * struct drm_dp_vsc_sdp - drm DP VSC SDP + * + * This structure represents a DP VSC SDP of drm + * It is based on DP 1.4 spec [Table 2-116: VSC SDP Header Bytes] and + * [Table 2-117: VSC SDP Payload for DB16 through DB18] + * + * @sdp_type: secondary-data packet type + * @revision: revision number + * @length: number of valid data bytes + * @pixelformat: pixel encoding format + * @colorimetry: colorimetry format + * @bpc: bit per color + * @dynamic_range: dynamic range information + * @content_type: CTA-861-G defines content types and expected processing by a sink device + */ +struct drm_dp_vsc_sdp { + unsigned char sdp_type; + unsigned char revision; + unsigned char length; + enum dp_pixelformat pixelformat; + enum dp_colorimetry colorimetry; + int bpc; + enum dp_dynamic_range dynamic_range; + enum dp_content_type content_type; +}; + +void drm_dp_vsc_sdp_log(const char *level, struct device *dev, + const struct drm_dp_vsc_sdp *vsc); + +int drm_dp_psr_setup_time(const u8 psr_cap[EDP_PSR_RECEIVER_CAP_SIZE]); + +static inline int +drm_dp_max_link_rate(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return drm_dp_bw_code_to_link_rate(dpcd[DP_MAX_LINK_RATE]); +} + +static inline u8 +drm_dp_max_lane_count(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_MAX_LANE_COUNT] & DP_MAX_LANE_COUNT_MASK; +} + +static inline bool +drm_dp_enhanced_frame_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DPCD_REV] >= 0x11 && + (dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP); +} + +static inline bool +drm_dp_fast_training_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DPCD_REV] >= 0x11 && + (dpcd[DP_MAX_DOWNSPREAD] & DP_NO_AUX_HANDSHAKE_LINK_TRAINING); +} + +static inline bool +drm_dp_tps3_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DPCD_REV] >= 0x12 && + dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED; +} + +static inline bool +drm_dp_max_downspread(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DPCD_REV] >= 0x11 || + dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5; +} + +static inline bool +drm_dp_tps4_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DPCD_REV] >= 0x14 && + dpcd[DP_MAX_DOWNSPREAD] & DP_TPS4_SUPPORTED; +} + +static inline u8 +drm_dp_training_pattern_mask(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return (dpcd[DP_DPCD_REV] >= 0x14) ? DP_TRAINING_PATTERN_MASK_1_4 : + DP_TRAINING_PATTERN_MASK; +} + +static inline bool +drm_dp_is_branch(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT; +} + +/* DP/eDP DSC support */ +u8 drm_dp_dsc_sink_max_slice_count(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE], + bool is_edp); +u8 drm_dp_dsc_sink_line_buf_depth(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]); +int drm_dp_dsc_sink_supported_input_bpcs(const u8 dsc_dpc[DP_DSC_RECEIVER_CAP_SIZE], + u8 dsc_bpc[3]); + +static inline bool +drm_dp_sink_supports_dsc(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) +{ + return dsc_dpcd[DP_DSC_SUPPORT - DP_DSC_SUPPORT] & + DP_DSC_DECOMPRESSION_IS_SUPPORTED; +} + +static inline u16 +drm_edp_dsc_sink_output_bpp(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) +{ + return dsc_dpcd[DP_DSC_MAX_BITS_PER_PIXEL_LOW - DP_DSC_SUPPORT] | + ((dsc_dpcd[DP_DSC_MAX_BITS_PER_PIXEL_HI - DP_DSC_SUPPORT] & + DP_DSC_MAX_BITS_PER_PIXEL_HI_MASK) << 8); +} + +static inline u32 +drm_dp_dsc_sink_max_slice_width(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) +{ + /* Max Slicewidth = Number of Pixels * 320 */ + return dsc_dpcd[DP_DSC_MAX_SLICE_WIDTH - DP_DSC_SUPPORT] * + DP_DSC_SLICE_WIDTH_MULTIPLIER; +} + +/* Forward Error Correction Support on DP 1.4 */ +static inline bool +drm_dp_sink_supports_fec(const u8 fec_capable) +{ + return fec_capable & DP_FEC_CAPABLE; +} + +static inline bool +drm_dp_channel_coding_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_MAIN_LINK_CHANNEL_CODING] & DP_CAP_ANSI_8B10B; +} + +static inline bool +drm_dp_alternate_scrambler_reset_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_EDP_CONFIGURATION_CAP] & + DP_ALTERNATE_SCRAMBLER_RESET_CAP; +} + +/* Ignore MSA timing for Adaptive Sync support on DP 1.4 */ +static inline bool +drm_dp_sink_can_do_video_without_timing_msa(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DOWN_STREAM_PORT_COUNT] & + DP_MSA_TIMING_PAR_IGNORED; +} + +/** + * drm_edp_backlight_supported() - Check an eDP DPCD for VESA backlight support + * @edp_dpcd: The DPCD to check + * + * Note that currently this function will return %false for panels which support various DPCD + * backlight features but which require the brightness be set through PWM, and don't support setting + * the brightness level via the DPCD. + * + * Returns: %True if @edp_dpcd indicates that VESA backlight controls are supported, %false + * otherwise + */ +static inline bool +drm_edp_backlight_supported(const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE]) +{ + return !!(edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP); +} + +/* + * DisplayPort AUX channel + */ + +/** + * struct drm_dp_aux_msg - DisplayPort AUX channel transaction + * @address: address of the (first) register to access + * @request: contains the type of transaction (see DP_AUX_* macros) + * @reply: upon completion, contains the reply type of the transaction + * @buffer: pointer to a transmission or reception buffer + * @size: size of @buffer + */ +struct drm_dp_aux_msg { + unsigned int address; + u8 request; + u8 reply; + void *buffer; + size_t size; +}; + +struct cec_adapter; +struct edid; +struct drm_connector; + +/** + * struct drm_dp_aux_cec - DisplayPort CEC-Tunneling-over-AUX + * @lock: mutex protecting this struct + * @adap: the CEC adapter for CEC-Tunneling-over-AUX support. + * @connector: the connector this CEC adapter is associated with + * @unregister_work: unregister the CEC adapter + */ +struct drm_dp_aux_cec { + struct mutex lock; + struct cec_adapter *adap; + struct drm_connector *connector; + struct delayed_work unregister_work; +}; + +/** + * struct drm_dp_aux - DisplayPort AUX channel + * + * An AUX channel can also be used to transport I2C messages to a sink. A + * typical application of that is to access an EDID that's present in the sink + * device. The @transfer() function can also be used to execute such + * transactions. The drm_dp_aux_register() function registers an I2C adapter + * that can be passed to drm_probe_ddc(). Upon removal, drivers should call + * drm_dp_aux_unregister() to remove the I2C adapter. The I2C adapter uses long + * transfers by default; if a partial response is received, the adapter will + * drop down to the size given by the partial response for this transaction + * only. + */ +struct drm_dp_aux { + /** + * @name: user-visible name of this AUX channel and the + * I2C-over-AUX adapter. + * + * It's also used to specify the name of the I2C adapter. If set + * to %NULL, dev_name() of @dev will be used. + */ + const char *name; + + /** + * @ddc: I2C adapter that can be used for I2C-over-AUX + * communication + */ + struct i2c_adapter ddc; + + /** + * @dev: pointer to struct device that is the parent for this + * AUX channel. + */ + struct device *dev; + + /** + * @drm_dev: pointer to the &drm_device that owns this AUX channel. + * Beware, this may be %NULL before drm_dp_aux_register() has been + * called. + * + * It should be set to the &drm_device that will be using this AUX + * channel as early as possible. For many graphics drivers this should + * happen before drm_dp_aux_init(), however it's perfectly fine to set + * this field later so long as it's assigned before calling + * drm_dp_aux_register(). + */ + struct drm_device *drm_dev; + + /** + * @crtc: backpointer to the crtc that is currently using this + * AUX channel + */ + struct drm_crtc *crtc; + + /** + * @hw_mutex: internal mutex used for locking transfers. + * + * Note that if the underlying hardware is shared among multiple + * channels, the driver needs to do additional locking to + * prevent concurrent access. + */ + struct mutex hw_mutex; + + /** + * @crc_work: worker that captures CRCs for each frame + */ + struct work_struct crc_work; + + /** + * @crc_count: counter of captured frame CRCs + */ + u8 crc_count; + + /** + * @transfer: transfers a message representing a single AUX + * transaction. + * + * This is a hardware-specific implementation of how + * transactions are executed that the drivers must provide. + * + * A pointer to a &drm_dp_aux_msg structure describing the + * transaction is passed into this function. Upon success, the + * implementation should return the number of payload bytes that + * were transferred, or a negative error-code on failure. + * + * Helpers will propagate these errors, with the exception of + * the %-EBUSY error, which causes a transaction to be retried. + * On a short, helpers will return %-EPROTO to make it simpler + * to check for failure. + * + * The @transfer() function must only modify the reply field of + * the &drm_dp_aux_msg structure. The retry logic and i2c + * helpers assume this is the case. + * + * Also note that this callback can be called no matter the + * state @dev is in and also no matter what state the panel is + * in. It's expected: + * + * - If the @dev providing the AUX bus is currently unpowered then + * it will power itself up for the transfer. + * + * - If we're on eDP (using a drm_panel) and the panel is not in a + * state where it can respond (it's not powered or it's in a + * low power state) then this function may return an error, but + * not crash. It's up to the caller of this code to make sure that + * the panel is powered on if getting an error back is not OK. If a + * drm_panel driver is initiating a DP AUX transfer it may power + * itself up however it wants. All other code should ensure that + * the pre_enable() bridge chain (which eventually calls the + * drm_panel prepare function) has powered the panel. + */ + ssize_t (*transfer)(struct drm_dp_aux *aux, + struct drm_dp_aux_msg *msg); + + /** + * @wait_hpd_asserted: wait for HPD to be asserted + * + * This is mainly useful for eDP panels drivers to wait for an eDP + * panel to finish powering on. This is an optional function. + * + * This function will efficiently wait for the HPD signal to be + * asserted. The `wait_us` parameter that is passed in says that we + * know that the HPD signal is expected to be asserted within `wait_us` + * microseconds. This function could wait for longer than `wait_us` if + * the logic in the DP controller has a long debouncing time. The + * important thing is that if this function returns success that the + * DP controller is ready to send AUX transactions. + * + * This function returns 0 if HPD was asserted or -ETIMEDOUT if time + * expired and HPD wasn't asserted. This function should not print + * timeout errors to the log. + * + * The semantics of this function are designed to match the + * readx_poll_timeout() function. That means a `wait_us` of 0 means + * to wait forever. Like readx_poll_timeout(), this function may sleep. + * + * NOTE: this function specifically reports the state of the HPD pin + * that's associated with the DP AUX channel. This is different from + * the HPD concept in much of the rest of DRM which is more about + * physical presence of a display. For eDP, for instance, a display is + * assumed always present even if the HPD pin is deasserted. + */ + int (*wait_hpd_asserted)(struct drm_dp_aux *aux, unsigned long wait_us); + + /** + * @i2c_nack_count: Counts I2C NACKs, used for DP validation. + */ + unsigned i2c_nack_count; + /** + * @i2c_defer_count: Counts I2C DEFERs, used for DP validation. + */ + unsigned i2c_defer_count; + /** + * @cec: struct containing fields used for CEC-Tunneling-over-AUX. + */ + struct drm_dp_aux_cec cec; + /** + * @is_remote: Is this AUX CH actually using sideband messaging. + */ + bool is_remote; +}; + +int drm_dp_dpcd_probe(struct drm_dp_aux *aux, unsigned int offset); +ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset, + void *buffer, size_t size); +ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset, + void *buffer, size_t size); + +/** + * drm_dp_dpcd_readb() - read a single byte from the DPCD + * @aux: DisplayPort AUX channel + * @offset: address of the register to read + * @valuep: location where the value of the register will be stored + * + * Returns the number of bytes transferred (1) on success, or a negative + * error code on failure. + */ +static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux, + unsigned int offset, u8 *valuep) +{ + return drm_dp_dpcd_read(aux, offset, valuep, 1); +} + +/** + * drm_dp_dpcd_writeb() - write a single byte to the DPCD + * @aux: DisplayPort AUX channel + * @offset: address of the register to write + * @value: value to write to the register + * + * Returns the number of bytes transferred (1) on success, or a negative + * error code on failure. + */ +static inline ssize_t drm_dp_dpcd_writeb(struct drm_dp_aux *aux, + unsigned int offset, u8 value) +{ + return drm_dp_dpcd_write(aux, offset, &value, 1); +} + +int drm_dp_read_dpcd_caps(struct drm_dp_aux *aux, + u8 dpcd[DP_RECEIVER_CAP_SIZE]); + +int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux, + u8 status[DP_LINK_STATUS_SIZE]); + +int drm_dp_dpcd_read_phy_link_status(struct drm_dp_aux *aux, + enum drm_dp_phy dp_phy, + u8 link_status[DP_LINK_STATUS_SIZE]); + +bool drm_dp_send_real_edid_checksum(struct drm_dp_aux *aux, + u8 real_edid_checksum); + +int drm_dp_read_downstream_info(struct drm_dp_aux *aux, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + u8 downstream_ports[DP_MAX_DOWNSTREAM_PORTS]); +bool drm_dp_downstream_is_type(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], u8 type); +bool drm_dp_downstream_is_tmds(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid); +int drm_dp_downstream_max_dotclock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +int drm_dp_downstream_max_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid); +int drm_dp_downstream_min_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid); +int drm_dp_downstream_max_bpc(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid); +bool drm_dp_downstream_420_passthrough(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +bool drm_dp_downstream_444_to_420_conversion(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +struct drm_display_mode *drm_dp_downstream_mode(struct drm_device *dev, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +int drm_dp_downstream_id(struct drm_dp_aux *aux, char id[6]); +void drm_dp_downstream_debug(struct seq_file *m, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid, + struct drm_dp_aux *aux); +enum drm_mode_subconnector +drm_dp_subconnector_type(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +void drm_dp_set_subconnector_property(struct drm_connector *connector, + enum drm_connector_status status, + const u8 *dpcd, + const u8 port_cap[4]); + +struct drm_dp_desc; +bool drm_dp_read_sink_count_cap(struct drm_connector *connector, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const struct drm_dp_desc *desc); +int drm_dp_read_sink_count(struct drm_dp_aux *aux); + +int drm_dp_read_lttpr_common_caps(struct drm_dp_aux *aux, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + u8 caps[DP_LTTPR_COMMON_CAP_SIZE]); +int drm_dp_read_lttpr_phy_caps(struct drm_dp_aux *aux, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + enum drm_dp_phy dp_phy, + u8 caps[DP_LTTPR_PHY_CAP_SIZE]); +int drm_dp_lttpr_count(const u8 cap[DP_LTTPR_COMMON_CAP_SIZE]); +int drm_dp_lttpr_max_link_rate(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]); +int drm_dp_lttpr_max_lane_count(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]); +bool drm_dp_lttpr_voltage_swing_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]); +bool drm_dp_lttpr_pre_emphasis_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]); + +void drm_dp_remote_aux_init(struct drm_dp_aux *aux); +void drm_dp_aux_init(struct drm_dp_aux *aux); +int drm_dp_aux_register(struct drm_dp_aux *aux); +void drm_dp_aux_unregister(struct drm_dp_aux *aux); + +int drm_dp_start_crc(struct drm_dp_aux *aux, struct drm_crtc *crtc); +int drm_dp_stop_crc(struct drm_dp_aux *aux); + +struct drm_dp_dpcd_ident { + u8 oui[3]; + u8 device_id[6]; + u8 hw_rev; + u8 sw_major_rev; + u8 sw_minor_rev; +} __packed; + +/** + * struct drm_dp_desc - DP branch/sink device descriptor + * @ident: DP device identification from DPCD 0x400 (sink) or 0x500 (branch). + * @quirks: Quirks; use drm_dp_has_quirk() to query for the quirks. + */ +struct drm_dp_desc { + struct drm_dp_dpcd_ident ident; + u32 quirks; +}; + +int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc, + bool is_branch); + +/** + * enum drm_dp_quirk - Display Port sink/branch device specific quirks + * + * Display Port sink and branch devices in the wild have a variety of bugs, try + * to collect them here. The quirks are shared, but it's up to the drivers to + * implement workarounds for them. + */ +enum drm_dp_quirk { + /** + * @DP_DPCD_QUIRK_CONSTANT_N: + * + * The device requires main link attributes Mvid and Nvid to be limited + * to 16 bits. So will give a constant value (0x8000) for compatability. + */ + DP_DPCD_QUIRK_CONSTANT_N, + /** + * @DP_DPCD_QUIRK_NO_PSR: + * + * The device does not support PSR even if reports that it supports or + * driver still need to implement proper handling for such device. + */ + DP_DPCD_QUIRK_NO_PSR, + /** + * @DP_DPCD_QUIRK_NO_SINK_COUNT: + * + * The device does not set SINK_COUNT to a non-zero value. + * The driver should ignore SINK_COUNT during detection. Note that + * drm_dp_read_sink_count_cap() automatically checks for this quirk. + */ + DP_DPCD_QUIRK_NO_SINK_COUNT, + /** + * @DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD: + * + * The device supports MST DSC despite not supporting Virtual DPCD. + * The DSC caps can be read from the physical aux instead. + */ + DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD, + /** + * @DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS: + * + * The device supports a link rate of 3.24 Gbps (multiplier 0xc) despite + * the DP_MAX_LINK_RATE register reporting a lower max multiplier. + */ + DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS, +}; + +/** + * drm_dp_has_quirk() - does the DP device have a specific quirk + * @desc: Device descriptor filled by drm_dp_read_desc() + * @quirk: Quirk to query for + * + * Return true if DP device identified by @desc has @quirk. + */ +static inline bool +drm_dp_has_quirk(const struct drm_dp_desc *desc, enum drm_dp_quirk quirk) +{ + return desc->quirks & BIT(quirk); +} + +/** + * struct drm_edp_backlight_info - Probed eDP backlight info struct + * @pwmgen_bit_count: The pwmgen bit count + * @pwm_freq_pre_divider: The PWM frequency pre-divider value being used for this backlight, if any + * @max: The maximum backlight level that may be set + * @lsb_reg_used: Do we also write values to the DP_EDP_BACKLIGHT_BRIGHTNESS_LSB register? + * @aux_enable: Does the panel support the AUX enable cap? + * @aux_set: Does the panel support setting the brightness through AUX? + * + * This structure contains various data about an eDP backlight, which can be populated by using + * drm_edp_backlight_init(). + */ +struct drm_edp_backlight_info { + u8 pwmgen_bit_count; + u8 pwm_freq_pre_divider; + u16 max; + + bool lsb_reg_used : 1; + bool aux_enable : 1; + bool aux_set : 1; +}; + +int +drm_edp_backlight_init(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl, + u16 driver_pwm_freq_hz, const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE], + u16 *current_level, u8 *current_mode); +int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl, + u16 level); +int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl, + u16 level); +int drm_edp_backlight_disable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl); + +#if IS_ENABLED(CONFIG_DRM_KMS_HELPER) && (IS_BUILTIN(CONFIG_BACKLIGHT_CLASS_DEVICE) || \ + (IS_MODULE(CONFIG_DRM_KMS_HELPER) && IS_MODULE(CONFIG_BACKLIGHT_CLASS_DEVICE))) + +int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux); + +#else + +static inline int drm_panel_dp_aux_backlight(struct drm_panel *panel, + struct drm_dp_aux *aux) +{ + return 0; +} + +#endif + +#ifdef CONFIG_DRM_DP_CEC +void drm_dp_cec_irq(struct drm_dp_aux *aux); +void drm_dp_cec_register_connector(struct drm_dp_aux *aux, + struct drm_connector *connector); +void drm_dp_cec_unregister_connector(struct drm_dp_aux *aux); +void drm_dp_cec_set_edid(struct drm_dp_aux *aux, const struct edid *edid); +void drm_dp_cec_unset_edid(struct drm_dp_aux *aux); +#else +static inline void drm_dp_cec_irq(struct drm_dp_aux *aux) +{ +} + +static inline void +drm_dp_cec_register_connector(struct drm_dp_aux *aux, + struct drm_connector *connector) +{ +} + +static inline void drm_dp_cec_unregister_connector(struct drm_dp_aux *aux) +{ +} + +static inline void drm_dp_cec_set_edid(struct drm_dp_aux *aux, + const struct edid *edid) +{ +} + +static inline void drm_dp_cec_unset_edid(struct drm_dp_aux *aux) +{ +} + +#endif + +/** + * struct drm_dp_phy_test_params - DP Phy Compliance parameters + * @link_rate: Requested Link rate from DPCD 0x219 + * @num_lanes: Number of lanes requested by sing through DPCD 0x220 + * @phy_pattern: DP Phy test pattern from DPCD 0x248 + * @hbr2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD 0x24A and 0x24B + * @custom80: DP Test_80BIT_CUSTOM_PATTERN from DPCDs 0x250 through 0x259 + * @enhanced_frame_cap: flag for enhanced frame capability. + */ +struct drm_dp_phy_test_params { + int link_rate; + u8 num_lanes; + u8 phy_pattern; + u8 hbr2_reset[2]; + u8 custom80[10]; + bool enhanced_frame_cap; +}; + +int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux, + struct drm_dp_phy_test_params *data); +int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux, + struct drm_dp_phy_test_params *data, u8 dp_rev); +int drm_dp_get_pcon_max_frl_bw(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +int drm_dp_pcon_frl_prepare(struct drm_dp_aux *aux, bool enable_frl_ready_hpd); +bool drm_dp_pcon_is_frl_ready(struct drm_dp_aux *aux); +int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps, + u8 frl_mode); +int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask, + u8 frl_type); +int drm_dp_pcon_reset_frl_config(struct drm_dp_aux *aux); +int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux); + +bool drm_dp_pcon_hdmi_link_active(struct drm_dp_aux *aux); +int drm_dp_pcon_hdmi_link_mode(struct drm_dp_aux *aux, u8 *frl_trained_mask); +void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux, + struct drm_connector *connector); +bool drm_dp_pcon_enc_is_dsc_1_2(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_dsc_max_slices(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_dsc_max_slice_width(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_dsc_bpp_incr(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_pps_default(struct drm_dp_aux *aux); +int drm_dp_pcon_pps_override_buf(struct drm_dp_aux *aux, u8 pps_buf[128]); +int drm_dp_pcon_pps_override_param(struct drm_dp_aux *aux, u8 pps_param[6]); +bool drm_dp_downstream_rgb_to_ycbcr_conversion(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], u8 color_spc); +int drm_dp_pcon_convert_rgb_to_ycbcr(struct drm_dp_aux *aux, u8 color_spc); + +#endif /* _DRM_DP_HELPER_H_ */ |