summaryrefslogtreecommitdiffstats
path: root/include/drm/display
diff options
context:
space:
mode:
Diffstat (limited to 'include/drm/display')
-rw-r--r--include/drm/display/drm_dp.h1699
-rw-r--r--include/drm/display/drm_dp_aux_bus.h85
-rw-r--r--include/drm/display/drm_dp_dual_mode_helper.h121
-rw-r--r--include/drm/display/drm_dp_helper.h765
-rw-r--r--include/drm/display/drm_dp_mst_helper.h1014
-rw-r--r--include/drm/display/drm_dsc.h605
-rw-r--r--include/drm/display/drm_dsc_helper.h20
-rw-r--r--include/drm/display/drm_hdcp.h298
-rw-r--r--include/drm/display/drm_hdcp_helper.h22
-rw-r--r--include/drm/display/drm_hdmi_helper.h27
-rw-r--r--include/drm/display/drm_scdc.h88
-rw-r--r--include/drm/display/drm_scdc_helper.h79
12 files changed, 4823 insertions, 0 deletions
diff --git a/include/drm/display/drm_dp.h b/include/drm/display/drm_dp.h
new file mode 100644
index 000000000..b235d6833
--- /dev/null
+++ b/include/drm/display/drm_dp.h
@@ -0,0 +1,1699 @@
+/*
+ * Copyright © 2008 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. The copyright holders make no representations
+ * about the suitability of this software for any purpose. It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef _DRM_DP_H_
+#define _DRM_DP_H_
+
+#include <linux/types.h>
+
+/*
+ * Unless otherwise noted, all values are from the DP 1.1a spec. Note that
+ * DP and DPCD versions are independent. Differences from 1.0 are not noted,
+ * 1.0 devices basically don't exist in the wild.
+ *
+ * Abbreviations, in chronological order:
+ *
+ * eDP: Embedded DisplayPort version 1
+ * DPI: DisplayPort Interoperability Guideline v1.1a
+ * 1.2: DisplayPort 1.2
+ * MST: Multistream Transport - part of DP 1.2a
+ *
+ * 1.2 formally includes both eDP and DPI definitions.
+ */
+
+/* MSA (Main Stream Attribute) MISC bits (as MISC1<<8|MISC0) */
+#define DP_MSA_MISC_SYNC_CLOCK (1 << 0)
+#define DP_MSA_MISC_INTERLACE_VTOTAL_EVEN (1 << 8)
+#define DP_MSA_MISC_STEREO_NO_3D (0 << 9)
+#define DP_MSA_MISC_STEREO_PROG_RIGHT_EYE (1 << 9)
+#define DP_MSA_MISC_STEREO_PROG_LEFT_EYE (3 << 9)
+/* bits per component for non-RAW */
+#define DP_MSA_MISC_6_BPC (0 << 5)
+#define DP_MSA_MISC_8_BPC (1 << 5)
+#define DP_MSA_MISC_10_BPC (2 << 5)
+#define DP_MSA_MISC_12_BPC (3 << 5)
+#define DP_MSA_MISC_16_BPC (4 << 5)
+/* bits per component for RAW */
+#define DP_MSA_MISC_RAW_6_BPC (1 << 5)
+#define DP_MSA_MISC_RAW_7_BPC (2 << 5)
+#define DP_MSA_MISC_RAW_8_BPC (3 << 5)
+#define DP_MSA_MISC_RAW_10_BPC (4 << 5)
+#define DP_MSA_MISC_RAW_12_BPC (5 << 5)
+#define DP_MSA_MISC_RAW_14_BPC (6 << 5)
+#define DP_MSA_MISC_RAW_16_BPC (7 << 5)
+/* pixel encoding/colorimetry format */
+#define _DP_MSA_MISC_COLOR(misc1_7, misc0_21, misc0_3, misc0_4) \
+ ((misc1_7) << 15 | (misc0_4) << 4 | (misc0_3) << 3 | ((misc0_21) << 1))
+#define DP_MSA_MISC_COLOR_RGB _DP_MSA_MISC_COLOR(0, 0, 0, 0)
+#define DP_MSA_MISC_COLOR_CEA_RGB _DP_MSA_MISC_COLOR(0, 0, 1, 0)
+#define DP_MSA_MISC_COLOR_RGB_WIDE_FIXED _DP_MSA_MISC_COLOR(0, 3, 0, 0)
+#define DP_MSA_MISC_COLOR_RGB_WIDE_FLOAT _DP_MSA_MISC_COLOR(0, 3, 0, 1)
+#define DP_MSA_MISC_COLOR_Y_ONLY _DP_MSA_MISC_COLOR(1, 0, 0, 0)
+#define DP_MSA_MISC_COLOR_RAW _DP_MSA_MISC_COLOR(1, 1, 0, 0)
+#define DP_MSA_MISC_COLOR_YCBCR_422_BT601 _DP_MSA_MISC_COLOR(0, 1, 1, 0)
+#define DP_MSA_MISC_COLOR_YCBCR_422_BT709 _DP_MSA_MISC_COLOR(0, 1, 1, 1)
+#define DP_MSA_MISC_COLOR_YCBCR_444_BT601 _DP_MSA_MISC_COLOR(0, 2, 1, 0)
+#define DP_MSA_MISC_COLOR_YCBCR_444_BT709 _DP_MSA_MISC_COLOR(0, 2, 1, 1)
+#define DP_MSA_MISC_COLOR_XVYCC_422_BT601 _DP_MSA_MISC_COLOR(0, 1, 0, 0)
+#define DP_MSA_MISC_COLOR_XVYCC_422_BT709 _DP_MSA_MISC_COLOR(0, 1, 0, 1)
+#define DP_MSA_MISC_COLOR_XVYCC_444_BT601 _DP_MSA_MISC_COLOR(0, 2, 0, 0)
+#define DP_MSA_MISC_COLOR_XVYCC_444_BT709 _DP_MSA_MISC_COLOR(0, 2, 0, 1)
+#define DP_MSA_MISC_COLOR_OPRGB _DP_MSA_MISC_COLOR(0, 0, 1, 1)
+#define DP_MSA_MISC_COLOR_DCI_P3 _DP_MSA_MISC_COLOR(0, 3, 1, 0)
+#define DP_MSA_MISC_COLOR_COLOR_PROFILE _DP_MSA_MISC_COLOR(0, 3, 1, 1)
+#define DP_MSA_MISC_COLOR_VSC_SDP (1 << 14)
+
+#define DP_AUX_MAX_PAYLOAD_BYTES 16
+
+#define DP_AUX_I2C_WRITE 0x0
+#define DP_AUX_I2C_READ 0x1
+#define DP_AUX_I2C_WRITE_STATUS_UPDATE 0x2
+#define DP_AUX_I2C_MOT 0x4
+#define DP_AUX_NATIVE_WRITE 0x8
+#define DP_AUX_NATIVE_READ 0x9
+
+#define DP_AUX_NATIVE_REPLY_ACK (0x0 << 0)
+#define DP_AUX_NATIVE_REPLY_NACK (0x1 << 0)
+#define DP_AUX_NATIVE_REPLY_DEFER (0x2 << 0)
+#define DP_AUX_NATIVE_REPLY_MASK (0x3 << 0)
+
+#define DP_AUX_I2C_REPLY_ACK (0x0 << 2)
+#define DP_AUX_I2C_REPLY_NACK (0x1 << 2)
+#define DP_AUX_I2C_REPLY_DEFER (0x2 << 2)
+#define DP_AUX_I2C_REPLY_MASK (0x3 << 2)
+
+/* DPCD Field Address Mapping */
+
+/* Receiver Capability */
+#define DP_DPCD_REV 0x000
+# define DP_DPCD_REV_10 0x10
+# define DP_DPCD_REV_11 0x11
+# define DP_DPCD_REV_12 0x12
+# define DP_DPCD_REV_13 0x13
+# define DP_DPCD_REV_14 0x14
+
+#define DP_MAX_LINK_RATE 0x001
+
+#define DP_MAX_LANE_COUNT 0x002
+# define DP_MAX_LANE_COUNT_MASK 0x1f
+# define DP_TPS3_SUPPORTED (1 << 6) /* 1.2 */
+# define DP_ENHANCED_FRAME_CAP (1 << 7)
+
+#define DP_MAX_DOWNSPREAD 0x003
+# define DP_MAX_DOWNSPREAD_0_5 (1 << 0)
+# define DP_STREAM_REGENERATION_STATUS_CAP (1 << 1) /* 2.0 */
+# define DP_NO_AUX_HANDSHAKE_LINK_TRAINING (1 << 6)
+# define DP_TPS4_SUPPORTED (1 << 7)
+
+#define DP_NORP 0x004
+
+#define DP_DOWNSTREAMPORT_PRESENT 0x005
+# define DP_DWN_STRM_PORT_PRESENT (1 << 0)
+# define DP_DWN_STRM_PORT_TYPE_MASK 0x06
+# define DP_DWN_STRM_PORT_TYPE_DP (0 << 1)
+# define DP_DWN_STRM_PORT_TYPE_ANALOG (1 << 1)
+# define DP_DWN_STRM_PORT_TYPE_TMDS (2 << 1)
+# define DP_DWN_STRM_PORT_TYPE_OTHER (3 << 1)
+# define DP_FORMAT_CONVERSION (1 << 3)
+# define DP_DETAILED_CAP_INFO_AVAILABLE (1 << 4) /* DPI */
+
+#define DP_MAIN_LINK_CHANNEL_CODING 0x006
+# define DP_CAP_ANSI_8B10B (1 << 0)
+# define DP_CAP_ANSI_128B132B (1 << 1) /* 2.0 */
+
+#define DP_DOWN_STREAM_PORT_COUNT 0x007
+# define DP_PORT_COUNT_MASK 0x0f
+# define DP_MSA_TIMING_PAR_IGNORED (1 << 6) /* eDP */
+# define DP_OUI_SUPPORT (1 << 7)
+
+#define DP_RECEIVE_PORT_0_CAP_0 0x008
+# define DP_LOCAL_EDID_PRESENT (1 << 1)
+# define DP_ASSOCIATED_TO_PRECEDING_PORT (1 << 2)
+
+#define DP_RECEIVE_PORT_0_BUFFER_SIZE 0x009
+
+#define DP_RECEIVE_PORT_1_CAP_0 0x00a
+#define DP_RECEIVE_PORT_1_BUFFER_SIZE 0x00b
+
+#define DP_I2C_SPEED_CAP 0x00c /* DPI */
+# define DP_I2C_SPEED_1K 0x01
+# define DP_I2C_SPEED_5K 0x02
+# define DP_I2C_SPEED_10K 0x04
+# define DP_I2C_SPEED_100K 0x08
+# define DP_I2C_SPEED_400K 0x10
+# define DP_I2C_SPEED_1M 0x20
+
+#define DP_EDP_CONFIGURATION_CAP 0x00d /* XXX 1.2? */
+# define DP_ALTERNATE_SCRAMBLER_RESET_CAP (1 << 0)
+# define DP_FRAMING_CHANGE_CAP (1 << 1)
+# define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3) /* edp v1.2 or higher */
+
+#define DP_TRAINING_AUX_RD_INTERVAL 0x00e /* XXX 1.2? */
+# define DP_TRAINING_AUX_RD_MASK 0x7F /* DP 1.3 */
+# define DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT (1 << 7) /* DP 1.3 */
+
+#define DP_ADAPTER_CAP 0x00f /* 1.2 */
+# define DP_FORCE_LOAD_SENSE_CAP (1 << 0)
+# define DP_ALTERNATE_I2C_PATTERN_CAP (1 << 1)
+
+#define DP_SUPPORTED_LINK_RATES 0x010 /* eDP 1.4 */
+# define DP_MAX_SUPPORTED_RATES 8 /* 16-bit little-endian */
+
+/* Multiple stream transport */
+#define DP_FAUX_CAP 0x020 /* 1.2 */
+# define DP_FAUX_CAP_1 (1 << 0)
+
+#define DP_SINK_VIDEO_FALLBACK_FORMATS 0x020 /* 2.0 */
+# define DP_FALLBACK_1024x768_60HZ_24BPP (1 << 0)
+# define DP_FALLBACK_1280x720_60HZ_24BPP (1 << 1)
+# define DP_FALLBACK_1920x1080_60HZ_24BPP (1 << 2)
+
+#define DP_MSTM_CAP 0x021 /* 1.2 */
+# define DP_MST_CAP (1 << 0)
+# define DP_SINGLE_STREAM_SIDEBAND_MSG (1 << 1) /* 2.0 */
+
+#define DP_NUMBER_OF_AUDIO_ENDPOINTS 0x022 /* 1.2 */
+
+/* AV_SYNC_DATA_BLOCK 1.2 */
+#define DP_AV_GRANULARITY 0x023
+# define DP_AG_FACTOR_MASK (0xf << 0)
+# define DP_AG_FACTOR_3MS (0 << 0)
+# define DP_AG_FACTOR_2MS (1 << 0)
+# define DP_AG_FACTOR_1MS (2 << 0)
+# define DP_AG_FACTOR_500US (3 << 0)
+# define DP_AG_FACTOR_200US (4 << 0)
+# define DP_AG_FACTOR_100US (5 << 0)
+# define DP_AG_FACTOR_10US (6 << 0)
+# define DP_AG_FACTOR_1US (7 << 0)
+# define DP_VG_FACTOR_MASK (0xf << 4)
+# define DP_VG_FACTOR_3MS (0 << 4)
+# define DP_VG_FACTOR_2MS (1 << 4)
+# define DP_VG_FACTOR_1MS (2 << 4)
+# define DP_VG_FACTOR_500US (3 << 4)
+# define DP_VG_FACTOR_200US (4 << 4)
+# define DP_VG_FACTOR_100US (5 << 4)
+
+#define DP_AUD_DEC_LAT0 0x024
+#define DP_AUD_DEC_LAT1 0x025
+
+#define DP_AUD_PP_LAT0 0x026
+#define DP_AUD_PP_LAT1 0x027
+
+#define DP_VID_INTER_LAT 0x028
+
+#define DP_VID_PROG_LAT 0x029
+
+#define DP_REP_LAT 0x02a
+
+#define DP_AUD_DEL_INS0 0x02b
+#define DP_AUD_DEL_INS1 0x02c
+#define DP_AUD_DEL_INS2 0x02d
+/* End of AV_SYNC_DATA_BLOCK */
+
+#define DP_RECEIVER_ALPM_CAP 0x02e /* eDP 1.4 */
+# define DP_ALPM_CAP (1 << 0)
+
+#define DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP 0x02f /* eDP 1.4 */
+# define DP_AUX_FRAME_SYNC_CAP (1 << 0)
+
+#define DP_GUID 0x030 /* 1.2 */
+
+#define DP_DSC_SUPPORT 0x060 /* DP 1.4 */
+# define DP_DSC_DECOMPRESSION_IS_SUPPORTED (1 << 0)
+# define DP_DSC_PASSTHROUGH_IS_SUPPORTED (1 << 1)
+# define DP_DSC_DYNAMIC_PPS_UPDATE_SUPPORT_COMP_TO_COMP (1 << 2)
+# define DP_DSC_DYNAMIC_PPS_UPDATE_SUPPORT_UNCOMP_TO_COMP (1 << 3)
+
+#define DP_DSC_REV 0x061
+# define DP_DSC_MAJOR_MASK (0xf << 0)
+# define DP_DSC_MINOR_MASK (0xf << 4)
+# define DP_DSC_MAJOR_SHIFT 0
+# define DP_DSC_MINOR_SHIFT 4
+
+#define DP_DSC_RC_BUF_BLK_SIZE 0x062
+# define DP_DSC_RC_BUF_BLK_SIZE_1 0x0
+# define DP_DSC_RC_BUF_BLK_SIZE_4 0x1
+# define DP_DSC_RC_BUF_BLK_SIZE_16 0x2
+# define DP_DSC_RC_BUF_BLK_SIZE_64 0x3
+
+#define DP_DSC_RC_BUF_SIZE 0x063
+
+#define DP_DSC_SLICE_CAP_1 0x064
+# define DP_DSC_1_PER_DP_DSC_SINK (1 << 0)
+# define DP_DSC_2_PER_DP_DSC_SINK (1 << 1)
+# define DP_DSC_4_PER_DP_DSC_SINK (1 << 3)
+# define DP_DSC_6_PER_DP_DSC_SINK (1 << 4)
+# define DP_DSC_8_PER_DP_DSC_SINK (1 << 5)
+# define DP_DSC_10_PER_DP_DSC_SINK (1 << 6)
+# define DP_DSC_12_PER_DP_DSC_SINK (1 << 7)
+
+#define DP_DSC_LINE_BUF_BIT_DEPTH 0x065
+# define DP_DSC_LINE_BUF_BIT_DEPTH_MASK (0xf << 0)
+# define DP_DSC_LINE_BUF_BIT_DEPTH_9 0x0
+# define DP_DSC_LINE_BUF_BIT_DEPTH_10 0x1
+# define DP_DSC_LINE_BUF_BIT_DEPTH_11 0x2
+# define DP_DSC_LINE_BUF_BIT_DEPTH_12 0x3
+# define DP_DSC_LINE_BUF_BIT_DEPTH_13 0x4
+# define DP_DSC_LINE_BUF_BIT_DEPTH_14 0x5
+# define DP_DSC_LINE_BUF_BIT_DEPTH_15 0x6
+# define DP_DSC_LINE_BUF_BIT_DEPTH_16 0x7
+# define DP_DSC_LINE_BUF_BIT_DEPTH_8 0x8
+
+#define DP_DSC_BLK_PREDICTION_SUPPORT 0x066
+# define DP_DSC_BLK_PREDICTION_IS_SUPPORTED (1 << 0)
+# define DP_DSC_RGB_COLOR_CONV_BYPASS_SUPPORT (1 << 1)
+
+#define DP_DSC_MAX_BITS_PER_PIXEL_LOW 0x067 /* eDP 1.4 */
+
+#define DP_DSC_MAX_BITS_PER_PIXEL_HI 0x068 /* eDP 1.4 */
+# define DP_DSC_MAX_BITS_PER_PIXEL_HI_MASK (0x3 << 0)
+# define DP_DSC_MAX_BPP_DELTA_VERSION_MASK (0x3 << 5) /* eDP 1.5 & DP 2.0 */
+# define DP_DSC_MAX_BPP_DELTA_AVAILABILITY (1 << 7) /* eDP 1.5 & DP 2.0 */
+
+#define DP_DSC_DEC_COLOR_FORMAT_CAP 0x069
+# define DP_DSC_RGB (1 << 0)
+# define DP_DSC_YCbCr444 (1 << 1)
+# define DP_DSC_YCbCr422_Simple (1 << 2)
+# define DP_DSC_YCbCr422_Native (1 << 3)
+# define DP_DSC_YCbCr420_Native (1 << 4)
+
+#define DP_DSC_DEC_COLOR_DEPTH_CAP 0x06A
+# define DP_DSC_8_BPC (1 << 1)
+# define DP_DSC_10_BPC (1 << 2)
+# define DP_DSC_12_BPC (1 << 3)
+
+#define DP_DSC_PEAK_THROUGHPUT 0x06B
+# define DP_DSC_THROUGHPUT_MODE_0_MASK (0xf << 0)
+# define DP_DSC_THROUGHPUT_MODE_0_SHIFT 0
+# define DP_DSC_THROUGHPUT_MODE_0_UNSUPPORTED 0
+# define DP_DSC_THROUGHPUT_MODE_0_340 (1 << 0)
+# define DP_DSC_THROUGHPUT_MODE_0_400 (2 << 0)
+# define DP_DSC_THROUGHPUT_MODE_0_450 (3 << 0)
+# define DP_DSC_THROUGHPUT_MODE_0_500 (4 << 0)
+# define DP_DSC_THROUGHPUT_MODE_0_550 (5 << 0)
+# define DP_DSC_THROUGHPUT_MODE_0_600 (6 << 0)
+# define DP_DSC_THROUGHPUT_MODE_0_650 (7 << 0)
+# define DP_DSC_THROUGHPUT_MODE_0_700 (8 << 0)
+# define DP_DSC_THROUGHPUT_MODE_0_750 (9 << 0)
+# define DP_DSC_THROUGHPUT_MODE_0_800 (10 << 0)
+# define DP_DSC_THROUGHPUT_MODE_0_850 (11 << 0)
+# define DP_DSC_THROUGHPUT_MODE_0_900 (12 << 0)
+# define DP_DSC_THROUGHPUT_MODE_0_950 (13 << 0)
+# define DP_DSC_THROUGHPUT_MODE_0_1000 (14 << 0)
+# define DP_DSC_THROUGHPUT_MODE_0_170 (15 << 0) /* 1.4a */
+# define DP_DSC_THROUGHPUT_MODE_1_MASK (0xf << 4)
+# define DP_DSC_THROUGHPUT_MODE_1_SHIFT 4
+# define DP_DSC_THROUGHPUT_MODE_1_UNSUPPORTED 0
+# define DP_DSC_THROUGHPUT_MODE_1_340 (1 << 4)
+# define DP_DSC_THROUGHPUT_MODE_1_400 (2 << 4)
+# define DP_DSC_THROUGHPUT_MODE_1_450 (3 << 4)
+# define DP_DSC_THROUGHPUT_MODE_1_500 (4 << 4)
+# define DP_DSC_THROUGHPUT_MODE_1_550 (5 << 4)
+# define DP_DSC_THROUGHPUT_MODE_1_600 (6 << 4)
+# define DP_DSC_THROUGHPUT_MODE_1_650 (7 << 4)
+# define DP_DSC_THROUGHPUT_MODE_1_700 (8 << 4)
+# define DP_DSC_THROUGHPUT_MODE_1_750 (9 << 4)
+# define DP_DSC_THROUGHPUT_MODE_1_800 (10 << 4)
+# define DP_DSC_THROUGHPUT_MODE_1_850 (11 << 4)
+# define DP_DSC_THROUGHPUT_MODE_1_900 (12 << 4)
+# define DP_DSC_THROUGHPUT_MODE_1_950 (13 << 4)
+# define DP_DSC_THROUGHPUT_MODE_1_1000 (14 << 4)
+# define DP_DSC_THROUGHPUT_MODE_1_170 (15 << 4)
+
+#define DP_DSC_MAX_SLICE_WIDTH 0x06C
+#define DP_DSC_MIN_SLICE_WIDTH_VALUE 2560
+#define DP_DSC_SLICE_WIDTH_MULTIPLIER 320
+
+#define DP_DSC_SLICE_CAP_2 0x06D
+# define DP_DSC_16_PER_DP_DSC_SINK (1 << 0)
+# define DP_DSC_20_PER_DP_DSC_SINK (1 << 1)
+# define DP_DSC_24_PER_DP_DSC_SINK (1 << 2)
+
+#define DP_DSC_BITS_PER_PIXEL_INC 0x06F
+# define DP_DSC_RGB_YCbCr444_MAX_BPP_DELTA_MASK 0x1f
+# define DP_DSC_RGB_YCbCr420_MAX_BPP_DELTA_MASK 0xe0
+# define DP_DSC_BITS_PER_PIXEL_1_16 0x0
+# define DP_DSC_BITS_PER_PIXEL_1_8 0x1
+# define DP_DSC_BITS_PER_PIXEL_1_4 0x2
+# define DP_DSC_BITS_PER_PIXEL_1_2 0x3
+# define DP_DSC_BITS_PER_PIXEL_1_1 0x4
+
+#define DP_PSR_SUPPORT 0x070 /* XXX 1.2? */
+# define DP_PSR_IS_SUPPORTED 1
+# define DP_PSR2_IS_SUPPORTED 2 /* eDP 1.4 */
+# define DP_PSR2_WITH_Y_COORD_IS_SUPPORTED 3 /* eDP 1.4a */
+# define DP_PSR2_WITH_Y_COORD_ET_SUPPORTED 4 /* eDP 1.5, adopted eDP 1.4b SCR */
+
+#define DP_PSR_CAPS 0x071 /* XXX 1.2? */
+# define DP_PSR_NO_TRAIN_ON_EXIT 1
+# define DP_PSR_SETUP_TIME_330 (0 << 1)
+# define DP_PSR_SETUP_TIME_275 (1 << 1)
+# define DP_PSR_SETUP_TIME_220 (2 << 1)
+# define DP_PSR_SETUP_TIME_165 (3 << 1)
+# define DP_PSR_SETUP_TIME_110 (4 << 1)
+# define DP_PSR_SETUP_TIME_55 (5 << 1)
+# define DP_PSR_SETUP_TIME_0 (6 << 1)
+# define DP_PSR_SETUP_TIME_MASK (7 << 1)
+# define DP_PSR_SETUP_TIME_SHIFT 1
+# define DP_PSR2_SU_Y_COORDINATE_REQUIRED (1 << 4) /* eDP 1.4a */
+# define DP_PSR2_SU_GRANULARITY_REQUIRED (1 << 5) /* eDP 1.4b */
+# define DP_PSR2_SU_AUX_FRAME_SYNC_NOT_NEEDED (1 << 6)/* eDP 1.5, adopted eDP 1.4b SCR */
+
+#define DP_PSR2_SU_X_GRANULARITY 0x072 /* eDP 1.4b */
+#define DP_PSR2_SU_Y_GRANULARITY 0x074 /* eDP 1.4b */
+
+/*
+ * 0x80-0x8f describe downstream port capabilities, but there are two layouts
+ * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set. If it was not,
+ * each port's descriptor is one byte wide. If it was set, each port's is
+ * four bytes wide, starting with the one byte from the base info. As of
+ * DP interop v1.1a only VGA defines additional detail.
+ */
+
+/* offset 0 */
+#define DP_DOWNSTREAM_PORT_0 0x80
+# define DP_DS_PORT_TYPE_MASK (7 << 0)
+# define DP_DS_PORT_TYPE_DP 0
+# define DP_DS_PORT_TYPE_VGA 1
+# define DP_DS_PORT_TYPE_DVI 2
+# define DP_DS_PORT_TYPE_HDMI 3
+# define DP_DS_PORT_TYPE_NON_EDID 4
+# define DP_DS_PORT_TYPE_DP_DUALMODE 5
+# define DP_DS_PORT_TYPE_WIRELESS 6
+# define DP_DS_PORT_HPD (1 << 3)
+# define DP_DS_NON_EDID_MASK (0xf << 4)
+# define DP_DS_NON_EDID_720x480i_60 (1 << 4)
+# define DP_DS_NON_EDID_720x480i_50 (2 << 4)
+# define DP_DS_NON_EDID_1920x1080i_60 (3 << 4)
+# define DP_DS_NON_EDID_1920x1080i_50 (4 << 4)
+# define DP_DS_NON_EDID_1280x720_60 (5 << 4)
+# define DP_DS_NON_EDID_1280x720_50 (7 << 4)
+/* offset 1 for VGA is maximum megapixels per second / 8 */
+/* offset 1 for DVI/HDMI is maximum TMDS clock in Mbps / 2.5 */
+/* offset 2 for VGA/DVI/HDMI */
+# define DP_DS_MAX_BPC_MASK (3 << 0)
+# define DP_DS_8BPC 0
+# define DP_DS_10BPC 1
+# define DP_DS_12BPC 2
+# define DP_DS_16BPC 3
+/* HDMI2.1 PCON FRL CONFIGURATION */
+# define DP_PCON_MAX_FRL_BW (7 << 2)
+# define DP_PCON_MAX_0GBPS (0 << 2)
+# define DP_PCON_MAX_9GBPS (1 << 2)
+# define DP_PCON_MAX_18GBPS (2 << 2)
+# define DP_PCON_MAX_24GBPS (3 << 2)
+# define DP_PCON_MAX_32GBPS (4 << 2)
+# define DP_PCON_MAX_40GBPS (5 << 2)
+# define DP_PCON_MAX_48GBPS (6 << 2)
+# define DP_PCON_SOURCE_CTL_MODE (1 << 5)
+
+/* offset 3 for DVI */
+# define DP_DS_DVI_DUAL_LINK (1 << 1)
+# define DP_DS_DVI_HIGH_COLOR_DEPTH (1 << 2)
+/* offset 3 for HDMI */
+# define DP_DS_HDMI_FRAME_SEQ_TO_FRAME_PACK (1 << 0)
+# define DP_DS_HDMI_YCBCR422_PASS_THROUGH (1 << 1)
+# define DP_DS_HDMI_YCBCR420_PASS_THROUGH (1 << 2)
+# define DP_DS_HDMI_YCBCR444_TO_422_CONV (1 << 3)
+# define DP_DS_HDMI_YCBCR444_TO_420_CONV (1 << 4)
+
+/*
+ * VESA DP-to-HDMI PCON Specification adds caps for colorspace
+ * conversion in DFP cap DPCD 83h. Sec6.1 Table-3.
+ * Based on the available support the source can enable
+ * color conversion by writing into PROTOCOL_COVERTER_CONTROL_2
+ * DPCD 3052h.
+ */
+# define DP_DS_HDMI_BT601_RGB_YCBCR_CONV (1 << 5)
+# define DP_DS_HDMI_BT709_RGB_YCBCR_CONV (1 << 6)
+# define DP_DS_HDMI_BT2020_RGB_YCBCR_CONV (1 << 7)
+
+#define DP_MAX_DOWNSTREAM_PORTS 0x10
+
+/* DP Forward error Correction Registers */
+#define DP_FEC_CAPABILITY 0x090 /* 1.4 */
+# define DP_FEC_CAPABLE (1 << 0)
+# define DP_FEC_UNCORR_BLK_ERROR_COUNT_CAP (1 << 1)
+# define DP_FEC_CORR_BLK_ERROR_COUNT_CAP (1 << 2)
+# define DP_FEC_BIT_ERROR_COUNT_CAP (1 << 3)
+#define DP_FEC_CAPABILITY_1 0x091 /* 2.0 */
+
+/* DP-HDMI2.1 PCON DSC ENCODER SUPPORT */
+#define DP_PCON_DSC_ENCODER_CAP_SIZE 0xD /* 0x92 through 0x9E */
+#define DP_PCON_DSC_ENCODER 0x092
+# define DP_PCON_DSC_ENCODER_SUPPORTED (1 << 0)
+# define DP_PCON_DSC_PPS_ENC_OVERRIDE (1 << 1)
+
+/* DP-HDMI2.1 PCON DSC Version */
+#define DP_PCON_DSC_VERSION 0x093
+# define DP_PCON_DSC_MAJOR_MASK (0xF << 0)
+# define DP_PCON_DSC_MINOR_MASK (0xF << 4)
+# define DP_PCON_DSC_MAJOR_SHIFT 0
+# define DP_PCON_DSC_MINOR_SHIFT 4
+
+/* DP-HDMI2.1 PCON DSC RC Buffer block size */
+#define DP_PCON_DSC_RC_BUF_BLK_INFO 0x094
+# define DP_PCON_DSC_RC_BUF_BLK_SIZE (0x3 << 0)
+# define DP_PCON_DSC_RC_BUF_BLK_1KB 0
+# define DP_PCON_DSC_RC_BUF_BLK_4KB 1
+# define DP_PCON_DSC_RC_BUF_BLK_16KB 2
+# define DP_PCON_DSC_RC_BUF_BLK_64KB 3
+
+/* DP-HDMI2.1 PCON DSC RC Buffer size */
+#define DP_PCON_DSC_RC_BUF_SIZE 0x095
+
+/* DP-HDMI2.1 PCON DSC Slice capabilities-1 */
+#define DP_PCON_DSC_SLICE_CAP_1 0x096
+# define DP_PCON_DSC_1_PER_DSC_ENC (0x1 << 0)
+# define DP_PCON_DSC_2_PER_DSC_ENC (0x1 << 1)
+# define DP_PCON_DSC_4_PER_DSC_ENC (0x1 << 3)
+# define DP_PCON_DSC_6_PER_DSC_ENC (0x1 << 4)
+# define DP_PCON_DSC_8_PER_DSC_ENC (0x1 << 5)
+# define DP_PCON_DSC_10_PER_DSC_ENC (0x1 << 6)
+# define DP_PCON_DSC_12_PER_DSC_ENC (0x1 << 7)
+
+#define DP_PCON_DSC_BUF_BIT_DEPTH 0x097
+# define DP_PCON_DSC_BIT_DEPTH_MASK (0xF << 0)
+# define DP_PCON_DSC_DEPTH_9_BITS 0
+# define DP_PCON_DSC_DEPTH_10_BITS 1
+# define DP_PCON_DSC_DEPTH_11_BITS 2
+# define DP_PCON_DSC_DEPTH_12_BITS 3
+# define DP_PCON_DSC_DEPTH_13_BITS 4
+# define DP_PCON_DSC_DEPTH_14_BITS 5
+# define DP_PCON_DSC_DEPTH_15_BITS 6
+# define DP_PCON_DSC_DEPTH_16_BITS 7
+# define DP_PCON_DSC_DEPTH_8_BITS 8
+
+#define DP_PCON_DSC_BLOCK_PREDICTION 0x098
+# define DP_PCON_DSC_BLOCK_PRED_SUPPORT (0x1 << 0)
+
+#define DP_PCON_DSC_ENC_COLOR_FMT_CAP 0x099
+# define DP_PCON_DSC_ENC_RGB (0x1 << 0)
+# define DP_PCON_DSC_ENC_YUV444 (0x1 << 1)
+# define DP_PCON_DSC_ENC_YUV422_S (0x1 << 2)
+# define DP_PCON_DSC_ENC_YUV422_N (0x1 << 3)
+# define DP_PCON_DSC_ENC_YUV420_N (0x1 << 4)
+
+#define DP_PCON_DSC_ENC_COLOR_DEPTH_CAP 0x09A
+# define DP_PCON_DSC_ENC_8BPC (0x1 << 1)
+# define DP_PCON_DSC_ENC_10BPC (0x1 << 2)
+# define DP_PCON_DSC_ENC_12BPC (0x1 << 3)
+
+#define DP_PCON_DSC_MAX_SLICE_WIDTH 0x09B
+
+/* DP-HDMI2.1 PCON DSC Slice capabilities-2 */
+#define DP_PCON_DSC_SLICE_CAP_2 0x09C
+# define DP_PCON_DSC_16_PER_DSC_ENC (0x1 << 0)
+# define DP_PCON_DSC_20_PER_DSC_ENC (0x1 << 1)
+# define DP_PCON_DSC_24_PER_DSC_ENC (0x1 << 2)
+
+/* DP-HDMI2.1 PCON HDMI TX Encoder Bits/pixel increment */
+#define DP_PCON_DSC_BPP_INCR 0x09E
+# define DP_PCON_DSC_BPP_INCR_MASK (0x7 << 0)
+# define DP_PCON_DSC_ONE_16TH_BPP 0
+# define DP_PCON_DSC_ONE_8TH_BPP 1
+# define DP_PCON_DSC_ONE_4TH_BPP 2
+# define DP_PCON_DSC_ONE_HALF_BPP 3
+# define DP_PCON_DSC_ONE_BPP 4
+
+/* DP Extended DSC Capabilities */
+#define DP_DSC_BRANCH_OVERALL_THROUGHPUT_0 0x0a0 /* DP 1.4a SCR */
+#define DP_DSC_BRANCH_OVERALL_THROUGHPUT_1 0x0a1
+#define DP_DSC_BRANCH_MAX_LINE_WIDTH 0x0a2
+
+/* DFP Capability Extension */
+#define DP_DFP_CAPABILITY_EXTENSION_SUPPORT 0x0a3 /* 2.0 */
+
+/* Link Configuration */
+#define DP_LINK_BW_SET 0x100
+# define DP_LINK_RATE_TABLE 0x00 /* eDP 1.4 */
+# define DP_LINK_BW_1_62 0x06
+# define DP_LINK_BW_2_7 0x0a
+# define DP_LINK_BW_5_4 0x14 /* 1.2 */
+# define DP_LINK_BW_8_1 0x1e /* 1.4 */
+# define DP_LINK_BW_10 0x01 /* 2.0 128b/132b Link Layer */
+# define DP_LINK_BW_13_5 0x04 /* 2.0 128b/132b Link Layer */
+# define DP_LINK_BW_20 0x02 /* 2.0 128b/132b Link Layer */
+
+#define DP_LANE_COUNT_SET 0x101
+# define DP_LANE_COUNT_MASK 0x0f
+# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7)
+
+#define DP_TRAINING_PATTERN_SET 0x102
+# define DP_TRAINING_PATTERN_DISABLE 0
+# define DP_TRAINING_PATTERN_1 1
+# define DP_TRAINING_PATTERN_2 2
+# define DP_TRAINING_PATTERN_2_CDS 3 /* 2.0 E11 */
+# define DP_TRAINING_PATTERN_3 3 /* 1.2 */
+# define DP_TRAINING_PATTERN_4 7 /* 1.4 */
+# define DP_TRAINING_PATTERN_MASK 0x3
+# define DP_TRAINING_PATTERN_MASK_1_4 0xf
+
+/* DPCD 1.1 only. For DPCD >= 1.2 see per-lane DP_LINK_QUAL_LANEn_SET */
+# define DP_LINK_QUAL_PATTERN_11_DISABLE (0 << 2)
+# define DP_LINK_QUAL_PATTERN_11_D10_2 (1 << 2)
+# define DP_LINK_QUAL_PATTERN_11_ERROR_RATE (2 << 2)
+# define DP_LINK_QUAL_PATTERN_11_PRBS7 (3 << 2)
+# define DP_LINK_QUAL_PATTERN_11_MASK (3 << 2)
+
+# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4)
+# define DP_LINK_SCRAMBLING_DISABLE (1 << 5)
+
+# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6)
+# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6)
+# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6)
+# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6)
+
+#define DP_TRAINING_LANE0_SET 0x103
+#define DP_TRAINING_LANE1_SET 0x104
+#define DP_TRAINING_LANE2_SET 0x105
+#define DP_TRAINING_LANE3_SET 0x106
+
+# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3
+# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0
+# define DP_TRAIN_MAX_SWING_REACHED (1 << 2)
+# define DP_TRAIN_VOLTAGE_SWING_LEVEL_0 (0 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_LEVEL_1 (1 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_LEVEL_2 (2 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_LEVEL_3 (3 << 0)
+
+# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3)
+# define DP_TRAIN_PRE_EMPH_LEVEL_0 (0 << 3)
+# define DP_TRAIN_PRE_EMPH_LEVEL_1 (1 << 3)
+# define DP_TRAIN_PRE_EMPH_LEVEL_2 (2 << 3)
+# define DP_TRAIN_PRE_EMPH_LEVEL_3 (3 << 3)
+
+# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3
+# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5)
+
+# define DP_TX_FFE_PRESET_VALUE_MASK (0xf << 0) /* 2.0 128b/132b Link Layer */
+
+#define DP_DOWNSPREAD_CTRL 0x107
+# define DP_SPREAD_AMP_0_5 (1 << 4)
+# define DP_MSA_TIMING_PAR_IGNORE_EN (1 << 7) /* eDP */
+
+#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108
+# define DP_SET_ANSI_8B10B (1 << 0)
+# define DP_SET_ANSI_128B132B (1 << 1)
+
+#define DP_I2C_SPEED_CONTROL_STATUS 0x109 /* DPI */
+/* bitmask as for DP_I2C_SPEED_CAP */
+
+#define DP_EDP_CONFIGURATION_SET 0x10a /* XXX 1.2? */
+# define DP_ALTERNATE_SCRAMBLER_RESET_ENABLE (1 << 0)
+# define DP_FRAMING_CHANGE_ENABLE (1 << 1)
+# define DP_PANEL_SELF_TEST_ENABLE (1 << 7)
+
+#define DP_LINK_QUAL_LANE0_SET 0x10b /* DPCD >= 1.2 */
+#define DP_LINK_QUAL_LANE1_SET 0x10c
+#define DP_LINK_QUAL_LANE2_SET 0x10d
+#define DP_LINK_QUAL_LANE3_SET 0x10e
+# define DP_LINK_QUAL_PATTERN_DISABLE 0
+# define DP_LINK_QUAL_PATTERN_D10_2 1
+# define DP_LINK_QUAL_PATTERN_ERROR_RATE 2
+# define DP_LINK_QUAL_PATTERN_PRBS7 3
+# define DP_LINK_QUAL_PATTERN_80BIT_CUSTOM 4
+# define DP_LINK_QUAL_PATTERN_CP2520_PAT_1 5
+# define DP_LINK_QUAL_PATTERN_CP2520_PAT_2 6
+# define DP_LINK_QUAL_PATTERN_CP2520_PAT_3 7
+/* DP 2.0 UHBR10, UHBR13.5, UHBR20 */
+# define DP_LINK_QUAL_PATTERN_128B132B_TPS1 0x08
+# define DP_LINK_QUAL_PATTERN_128B132B_TPS2 0x10
+# define DP_LINK_QUAL_PATTERN_PRSBS9 0x18
+# define DP_LINK_QUAL_PATTERN_PRSBS11 0x20
+# define DP_LINK_QUAL_PATTERN_PRSBS15 0x28
+# define DP_LINK_QUAL_PATTERN_PRSBS23 0x30
+# define DP_LINK_QUAL_PATTERN_PRSBS31 0x38
+# define DP_LINK_QUAL_PATTERN_CUSTOM 0x40
+# define DP_LINK_QUAL_PATTERN_SQUARE 0x48
+
+#define DP_TRAINING_LANE0_1_SET2 0x10f
+#define DP_TRAINING_LANE2_3_SET2 0x110
+# define DP_LANE02_POST_CURSOR2_SET_MASK (3 << 0)
+# define DP_LANE02_MAX_POST_CURSOR2_REACHED (1 << 2)
+# define DP_LANE13_POST_CURSOR2_SET_MASK (3 << 4)
+# define DP_LANE13_MAX_POST_CURSOR2_REACHED (1 << 6)
+
+#define DP_MSTM_CTRL 0x111 /* 1.2 */
+# define DP_MST_EN (1 << 0)
+# define DP_UP_REQ_EN (1 << 1)
+# define DP_UPSTREAM_IS_SRC (1 << 2)
+
+#define DP_AUDIO_DELAY0 0x112 /* 1.2 */
+#define DP_AUDIO_DELAY1 0x113
+#define DP_AUDIO_DELAY2 0x114
+
+#define DP_LINK_RATE_SET 0x115 /* eDP 1.4 */
+# define DP_LINK_RATE_SET_SHIFT 0
+# define DP_LINK_RATE_SET_MASK (7 << 0)
+
+#define DP_RECEIVER_ALPM_CONFIG 0x116 /* eDP 1.4 */
+# define DP_ALPM_ENABLE (1 << 0)
+# define DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE (1 << 1)
+
+#define DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF 0x117 /* eDP 1.4 */
+# define DP_AUX_FRAME_SYNC_ENABLE (1 << 0)
+# define DP_IRQ_HPD_ENABLE (1 << 1)
+
+#define DP_UPSTREAM_DEVICE_DP_PWR_NEED 0x118 /* 1.2 */
+# define DP_PWR_NOT_NEEDED (1 << 0)
+
+#define DP_FEC_CONFIGURATION 0x120 /* 1.4 */
+# define DP_FEC_READY (1 << 0)
+# define DP_FEC_ERR_COUNT_SEL_MASK (7 << 1)
+# define DP_FEC_ERR_COUNT_DIS (0 << 1)
+# define DP_FEC_UNCORR_BLK_ERROR_COUNT (1 << 1)
+# define DP_FEC_CORR_BLK_ERROR_COUNT (2 << 1)
+# define DP_FEC_BIT_ERROR_COUNT (3 << 1)
+# define DP_FEC_LANE_SELECT_MASK (3 << 4)
+# define DP_FEC_LANE_0_SELECT (0 << 4)
+# define DP_FEC_LANE_1_SELECT (1 << 4)
+# define DP_FEC_LANE_2_SELECT (2 << 4)
+# define DP_FEC_LANE_3_SELECT (3 << 4)
+
+#define DP_AUX_FRAME_SYNC_VALUE 0x15c /* eDP 1.4 */
+# define DP_AUX_FRAME_SYNC_VALID (1 << 0)
+
+#define DP_DSC_ENABLE 0x160 /* DP 1.4 */
+# define DP_DECOMPRESSION_EN (1 << 0)
+#define DP_DSC_CONFIGURATION 0x161 /* DP 2.0 */
+
+#define DP_PSR_EN_CFG 0x170 /* XXX 1.2? */
+# define DP_PSR_ENABLE BIT(0)
+# define DP_PSR_MAIN_LINK_ACTIVE BIT(1)
+# define DP_PSR_CRC_VERIFICATION BIT(2)
+# define DP_PSR_FRAME_CAPTURE BIT(3)
+# define DP_PSR_SU_REGION_SCANLINE_CAPTURE BIT(4) /* eDP 1.4a */
+# define DP_PSR_IRQ_HPD_WITH_CRC_ERRORS BIT(5) /* eDP 1.4a */
+# define DP_PSR_ENABLE_PSR2 BIT(6) /* eDP 1.4a */
+
+#define DP_ADAPTER_CTRL 0x1a0
+# define DP_ADAPTER_CTRL_FORCE_LOAD_SENSE (1 << 0)
+
+#define DP_BRANCH_DEVICE_CTRL 0x1a1
+# define DP_BRANCH_DEVICE_IRQ_HPD (1 << 0)
+
+#define DP_PAYLOAD_ALLOCATE_SET 0x1c0
+#define DP_PAYLOAD_ALLOCATE_START_TIME_SLOT 0x1c1
+#define DP_PAYLOAD_ALLOCATE_TIME_SLOT_COUNT 0x1c2
+
+/* Link/Sink Device Status */
+#define DP_SINK_COUNT 0x200
+/* prior to 1.2 bit 7 was reserved mbz */
+# define DP_GET_SINK_COUNT(x) ((((x) & 0x80) >> 1) | ((x) & 0x3f))
+# define DP_SINK_CP_READY (1 << 6)
+
+#define DP_DEVICE_SERVICE_IRQ_VECTOR 0x201
+# define DP_REMOTE_CONTROL_COMMAND_PENDING (1 << 0)
+# define DP_AUTOMATED_TEST_REQUEST (1 << 1)
+# define DP_CP_IRQ (1 << 2)
+# define DP_MCCS_IRQ (1 << 3)
+# define DP_DOWN_REP_MSG_RDY (1 << 4) /* 1.2 MST */
+# define DP_UP_REQ_MSG_RDY (1 << 5) /* 1.2 MST */
+# define DP_SINK_SPECIFIC_IRQ (1 << 6)
+
+#define DP_LANE0_1_STATUS 0x202
+#define DP_LANE2_3_STATUS 0x203
+# define DP_LANE_CR_DONE (1 << 0)
+# define DP_LANE_CHANNEL_EQ_DONE (1 << 1)
+# define DP_LANE_SYMBOL_LOCKED (1 << 2)
+
+#define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE | \
+ DP_LANE_CHANNEL_EQ_DONE | \
+ DP_LANE_SYMBOL_LOCKED)
+
+#define DP_LANE_ALIGN_STATUS_UPDATED 0x204
+#define DP_INTERLANE_ALIGN_DONE (1 << 0)
+#define DP_128B132B_DPRX_EQ_INTERLANE_ALIGN_DONE (1 << 2) /* 2.0 E11 */
+#define DP_128B132B_DPRX_CDS_INTERLANE_ALIGN_DONE (1 << 3) /* 2.0 E11 */
+#define DP_128B132B_LT_FAILED (1 << 4) /* 2.0 E11 */
+#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6)
+#define DP_LINK_STATUS_UPDATED (1 << 7)
+
+#define DP_SINK_STATUS 0x205
+# define DP_RECEIVE_PORT_0_STATUS (1 << 0)
+# define DP_RECEIVE_PORT_1_STATUS (1 << 1)
+# define DP_STREAM_REGENERATION_STATUS (1 << 2) /* 2.0 */
+# define DP_INTRA_HOP_AUX_REPLY_INDICATION (1 << 3) /* 2.0 */
+
+#define DP_ADJUST_REQUEST_LANE0_1 0x206
+#define DP_ADJUST_REQUEST_LANE2_3 0x207
+# define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03
+# define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
+# define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c
+# define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2
+# define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30
+# define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
+# define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0
+# define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6
+
+/* DP 2.0 128b/132b Link Layer */
+# define DP_ADJUST_TX_FFE_PRESET_LANE0_MASK (0xf << 0)
+# define DP_ADJUST_TX_FFE_PRESET_LANE0_SHIFT 0
+# define DP_ADJUST_TX_FFE_PRESET_LANE1_MASK (0xf << 4)
+# define DP_ADJUST_TX_FFE_PRESET_LANE1_SHIFT 4
+
+#define DP_ADJUST_REQUEST_POST_CURSOR2 0x20c
+# define DP_ADJUST_POST_CURSOR2_LANE0_MASK 0x03
+# define DP_ADJUST_POST_CURSOR2_LANE0_SHIFT 0
+# define DP_ADJUST_POST_CURSOR2_LANE1_MASK 0x0c
+# define DP_ADJUST_POST_CURSOR2_LANE1_SHIFT 2
+# define DP_ADJUST_POST_CURSOR2_LANE2_MASK 0x30
+# define DP_ADJUST_POST_CURSOR2_LANE2_SHIFT 4
+# define DP_ADJUST_POST_CURSOR2_LANE3_MASK 0xc0
+# define DP_ADJUST_POST_CURSOR2_LANE3_SHIFT 6
+
+#define DP_TEST_REQUEST 0x218
+# define DP_TEST_LINK_TRAINING (1 << 0)
+# define DP_TEST_LINK_VIDEO_PATTERN (1 << 1)
+# define DP_TEST_LINK_EDID_READ (1 << 2)
+# define DP_TEST_LINK_PHY_TEST_PATTERN (1 << 3) /* DPCD >= 1.1 */
+# define DP_TEST_LINK_FAUX_PATTERN (1 << 4) /* DPCD >= 1.2 */
+# define DP_TEST_LINK_AUDIO_PATTERN (1 << 5) /* DPCD >= 1.2 */
+# define DP_TEST_LINK_AUDIO_DISABLED_VIDEO (1 << 6) /* DPCD >= 1.2 */
+
+#define DP_TEST_LINK_RATE 0x219
+# define DP_LINK_RATE_162 (0x6)
+# define DP_LINK_RATE_27 (0xa)
+
+#define DP_TEST_LANE_COUNT 0x220
+
+#define DP_TEST_PATTERN 0x221
+# define DP_NO_TEST_PATTERN 0x0
+# define DP_COLOR_RAMP 0x1
+# define DP_BLACK_AND_WHITE_VERTICAL_LINES 0x2
+# define DP_COLOR_SQUARE 0x3
+
+#define DP_TEST_H_TOTAL_HI 0x222
+#define DP_TEST_H_TOTAL_LO 0x223
+
+#define DP_TEST_V_TOTAL_HI 0x224
+#define DP_TEST_V_TOTAL_LO 0x225
+
+#define DP_TEST_H_START_HI 0x226
+#define DP_TEST_H_START_LO 0x227
+
+#define DP_TEST_V_START_HI 0x228
+#define DP_TEST_V_START_LO 0x229
+
+#define DP_TEST_HSYNC_HI 0x22A
+# define DP_TEST_HSYNC_POLARITY (1 << 7)
+# define DP_TEST_HSYNC_WIDTH_HI_MASK (127 << 0)
+#define DP_TEST_HSYNC_WIDTH_LO 0x22B
+
+#define DP_TEST_VSYNC_HI 0x22C
+# define DP_TEST_VSYNC_POLARITY (1 << 7)
+# define DP_TEST_VSYNC_WIDTH_HI_MASK (127 << 0)
+#define DP_TEST_VSYNC_WIDTH_LO 0x22D
+
+#define DP_TEST_H_WIDTH_HI 0x22E
+#define DP_TEST_H_WIDTH_LO 0x22F
+
+#define DP_TEST_V_HEIGHT_HI 0x230
+#define DP_TEST_V_HEIGHT_LO 0x231
+
+#define DP_TEST_MISC0 0x232
+# define DP_TEST_SYNC_CLOCK (1 << 0)
+# define DP_TEST_COLOR_FORMAT_MASK (3 << 1)
+# define DP_TEST_COLOR_FORMAT_SHIFT 1
+# define DP_COLOR_FORMAT_RGB (0 << 1)
+# define DP_COLOR_FORMAT_YCbCr422 (1 << 1)
+# define DP_COLOR_FORMAT_YCbCr444 (2 << 1)
+# define DP_TEST_DYNAMIC_RANGE_VESA (0 << 3)
+# define DP_TEST_DYNAMIC_RANGE_CEA (1 << 3)
+# define DP_TEST_YCBCR_COEFFICIENTS (1 << 4)
+# define DP_YCBCR_COEFFICIENTS_ITU601 (0 << 4)
+# define DP_YCBCR_COEFFICIENTS_ITU709 (1 << 4)
+# define DP_TEST_BIT_DEPTH_MASK (7 << 5)
+# define DP_TEST_BIT_DEPTH_SHIFT 5
+# define DP_TEST_BIT_DEPTH_6 (0 << 5)
+# define DP_TEST_BIT_DEPTH_8 (1 << 5)
+# define DP_TEST_BIT_DEPTH_10 (2 << 5)
+# define DP_TEST_BIT_DEPTH_12 (3 << 5)
+# define DP_TEST_BIT_DEPTH_16 (4 << 5)
+
+#define DP_TEST_MISC1 0x233
+# define DP_TEST_REFRESH_DENOMINATOR (1 << 0)
+# define DP_TEST_INTERLACED (1 << 1)
+
+#define DP_TEST_REFRESH_RATE_NUMERATOR 0x234
+
+#define DP_TEST_MISC0 0x232
+
+#define DP_TEST_CRC_R_CR 0x240
+#define DP_TEST_CRC_G_Y 0x242
+#define DP_TEST_CRC_B_CB 0x244
+
+#define DP_TEST_SINK_MISC 0x246
+# define DP_TEST_CRC_SUPPORTED (1 << 5)
+# define DP_TEST_COUNT_MASK 0xf
+
+#define DP_PHY_TEST_PATTERN 0x248
+# define DP_PHY_TEST_PATTERN_SEL_MASK 0x7
+# define DP_PHY_TEST_PATTERN_NONE 0x0
+# define DP_PHY_TEST_PATTERN_D10_2 0x1
+# define DP_PHY_TEST_PATTERN_ERROR_COUNT 0x2
+# define DP_PHY_TEST_PATTERN_PRBS7 0x3
+# define DP_PHY_TEST_PATTERN_80BIT_CUSTOM 0x4
+# define DP_PHY_TEST_PATTERN_CP2520 0x5
+
+#define DP_PHY_SQUARE_PATTERN 0x249
+
+#define DP_TEST_HBR2_SCRAMBLER_RESET 0x24A
+#define DP_TEST_80BIT_CUSTOM_PATTERN_7_0 0x250
+#define DP_TEST_80BIT_CUSTOM_PATTERN_15_8 0x251
+#define DP_TEST_80BIT_CUSTOM_PATTERN_23_16 0x252
+#define DP_TEST_80BIT_CUSTOM_PATTERN_31_24 0x253
+#define DP_TEST_80BIT_CUSTOM_PATTERN_39_32 0x254
+#define DP_TEST_80BIT_CUSTOM_PATTERN_47_40 0x255
+#define DP_TEST_80BIT_CUSTOM_PATTERN_55_48 0x256
+#define DP_TEST_80BIT_CUSTOM_PATTERN_63_56 0x257
+#define DP_TEST_80BIT_CUSTOM_PATTERN_71_64 0x258
+#define DP_TEST_80BIT_CUSTOM_PATTERN_79_72 0x259
+
+#define DP_TEST_RESPONSE 0x260
+# define DP_TEST_ACK (1 << 0)
+# define DP_TEST_NAK (1 << 1)
+# define DP_TEST_EDID_CHECKSUM_WRITE (1 << 2)
+
+#define DP_TEST_EDID_CHECKSUM 0x261
+
+#define DP_TEST_SINK 0x270
+# define DP_TEST_SINK_START (1 << 0)
+#define DP_TEST_AUDIO_MODE 0x271
+#define DP_TEST_AUDIO_PATTERN_TYPE 0x272
+#define DP_TEST_AUDIO_PERIOD_CH1 0x273
+#define DP_TEST_AUDIO_PERIOD_CH2 0x274
+#define DP_TEST_AUDIO_PERIOD_CH3 0x275
+#define DP_TEST_AUDIO_PERIOD_CH4 0x276
+#define DP_TEST_AUDIO_PERIOD_CH5 0x277
+#define DP_TEST_AUDIO_PERIOD_CH6 0x278
+#define DP_TEST_AUDIO_PERIOD_CH7 0x279
+#define DP_TEST_AUDIO_PERIOD_CH8 0x27A
+
+#define DP_FEC_STATUS 0x280 /* 1.4 */
+# define DP_FEC_DECODE_EN_DETECTED (1 << 0)
+# define DP_FEC_DECODE_DIS_DETECTED (1 << 1)
+
+#define DP_FEC_ERROR_COUNT_LSB 0x0281 /* 1.4 */
+
+#define DP_FEC_ERROR_COUNT_MSB 0x0282 /* 1.4 */
+# define DP_FEC_ERROR_COUNT_MASK 0x7F
+# define DP_FEC_ERR_COUNT_VALID (1 << 7)
+
+#define DP_PAYLOAD_TABLE_UPDATE_STATUS 0x2c0 /* 1.2 MST */
+# define DP_PAYLOAD_TABLE_UPDATED (1 << 0)
+# define DP_PAYLOAD_ACT_HANDLED (1 << 1)
+
+#define DP_VC_PAYLOAD_ID_SLOT_1 0x2c1 /* 1.2 MST */
+/* up to ID_SLOT_63 at 0x2ff */
+
+/* Source Device-specific */
+#define DP_SOURCE_OUI 0x300
+
+/* Sink Device-specific */
+#define DP_SINK_OUI 0x400
+
+/* Branch Device-specific */
+#define DP_BRANCH_OUI 0x500
+#define DP_BRANCH_ID 0x503
+#define DP_BRANCH_REVISION_START 0x509
+#define DP_BRANCH_HW_REV 0x509
+#define DP_BRANCH_SW_REV 0x50A
+
+/* Link/Sink Device Power Control */
+#define DP_SET_POWER 0x600
+# define DP_SET_POWER_D0 0x1
+# define DP_SET_POWER_D3 0x2
+# define DP_SET_POWER_MASK 0x3
+# define DP_SET_POWER_D3_AUX_ON 0x5
+
+/* eDP-specific */
+#define DP_EDP_DPCD_REV 0x700 /* eDP 1.2 */
+# define DP_EDP_11 0x00
+# define DP_EDP_12 0x01
+# define DP_EDP_13 0x02
+# define DP_EDP_14 0x03
+# define DP_EDP_14a 0x04 /* eDP 1.4a */
+# define DP_EDP_14b 0x05 /* eDP 1.4b */
+
+#define DP_EDP_GENERAL_CAP_1 0x701
+# define DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP (1 << 0)
+# define DP_EDP_BACKLIGHT_PIN_ENABLE_CAP (1 << 1)
+# define DP_EDP_BACKLIGHT_AUX_ENABLE_CAP (1 << 2)
+# define DP_EDP_PANEL_SELF_TEST_PIN_ENABLE_CAP (1 << 3)
+# define DP_EDP_PANEL_SELF_TEST_AUX_ENABLE_CAP (1 << 4)
+# define DP_EDP_FRC_ENABLE_CAP (1 << 5)
+# define DP_EDP_COLOR_ENGINE_CAP (1 << 6)
+# define DP_EDP_SET_POWER_CAP (1 << 7)
+
+#define DP_EDP_BACKLIGHT_ADJUSTMENT_CAP 0x702
+# define DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP (1 << 0)
+# define DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP (1 << 1)
+# define DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT (1 << 2)
+# define DP_EDP_BACKLIGHT_AUX_PWM_PRODUCT_CAP (1 << 3)
+# define DP_EDP_BACKLIGHT_FREQ_PWM_PIN_PASSTHRU_CAP (1 << 4)
+# define DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP (1 << 5)
+# define DP_EDP_DYNAMIC_BACKLIGHT_CAP (1 << 6)
+# define DP_EDP_VBLANK_BACKLIGHT_UPDATE_CAP (1 << 7)
+
+#define DP_EDP_GENERAL_CAP_2 0x703
+# define DP_EDP_OVERDRIVE_ENGINE_ENABLED (1 << 0)
+
+#define DP_EDP_GENERAL_CAP_3 0x704 /* eDP 1.4 */
+# define DP_EDP_X_REGION_CAP_MASK (0xf << 0)
+# define DP_EDP_X_REGION_CAP_SHIFT 0
+# define DP_EDP_Y_REGION_CAP_MASK (0xf << 4)
+# define DP_EDP_Y_REGION_CAP_SHIFT 4
+
+#define DP_EDP_DISPLAY_CONTROL_REGISTER 0x720
+# define DP_EDP_BACKLIGHT_ENABLE (1 << 0)
+# define DP_EDP_BLACK_VIDEO_ENABLE (1 << 1)
+# define DP_EDP_FRC_ENABLE (1 << 2)
+# define DP_EDP_COLOR_ENGINE_ENABLE (1 << 3)
+# define DP_EDP_VBLANK_BACKLIGHT_UPDATE_ENABLE (1 << 7)
+
+#define DP_EDP_BACKLIGHT_MODE_SET_REGISTER 0x721
+# define DP_EDP_BACKLIGHT_CONTROL_MODE_MASK (3 << 0)
+# define DP_EDP_BACKLIGHT_CONTROL_MODE_PWM (0 << 0)
+# define DP_EDP_BACKLIGHT_CONTROL_MODE_PRESET (1 << 0)
+# define DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD (2 << 0)
+# define DP_EDP_BACKLIGHT_CONTROL_MODE_PRODUCT (3 << 0)
+# define DP_EDP_BACKLIGHT_FREQ_PWM_PIN_PASSTHRU_ENABLE (1 << 2)
+# define DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE (1 << 3)
+# define DP_EDP_DYNAMIC_BACKLIGHT_ENABLE (1 << 4)
+# define DP_EDP_REGIONAL_BACKLIGHT_ENABLE (1 << 5)
+# define DP_EDP_UPDATE_REGION_BRIGHTNESS (1 << 6) /* eDP 1.4 */
+
+#define DP_EDP_BACKLIGHT_BRIGHTNESS_MSB 0x722
+#define DP_EDP_BACKLIGHT_BRIGHTNESS_LSB 0x723
+
+#define DP_EDP_PWMGEN_BIT_COUNT 0x724
+#define DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN 0x725
+#define DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX 0x726
+# define DP_EDP_PWMGEN_BIT_COUNT_MASK (0x1f << 0)
+
+#define DP_EDP_BACKLIGHT_CONTROL_STATUS 0x727
+
+#define DP_EDP_BACKLIGHT_FREQ_SET 0x728
+# define DP_EDP_BACKLIGHT_FREQ_BASE_KHZ 27000
+
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MSB 0x72a
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MID 0x72b
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_LSB 0x72c
+
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_MSB 0x72d
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_MID 0x72e
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_LSB 0x72f
+
+#define DP_EDP_DBC_MINIMUM_BRIGHTNESS_SET 0x732
+#define DP_EDP_DBC_MAXIMUM_BRIGHTNESS_SET 0x733
+
+#define DP_EDP_REGIONAL_BACKLIGHT_BASE 0x740 /* eDP 1.4 */
+#define DP_EDP_REGIONAL_BACKLIGHT_0 0x741 /* eDP 1.4 */
+
+#define DP_EDP_MSO_LINK_CAPABILITIES 0x7a4 /* eDP 1.4 */
+# define DP_EDP_MSO_NUMBER_OF_LINKS_MASK (7 << 0)
+# define DP_EDP_MSO_NUMBER_OF_LINKS_SHIFT 0
+# define DP_EDP_MSO_INDEPENDENT_LINK_BIT (1 << 3)
+
+/* Sideband MSG Buffers */
+#define DP_SIDEBAND_MSG_DOWN_REQ_BASE 0x1000 /* 1.2 MST */
+#define DP_SIDEBAND_MSG_UP_REP_BASE 0x1200 /* 1.2 MST */
+#define DP_SIDEBAND_MSG_DOWN_REP_BASE 0x1400 /* 1.2 MST */
+#define DP_SIDEBAND_MSG_UP_REQ_BASE 0x1600 /* 1.2 MST */
+
+/* DPRX Event Status Indicator */
+#define DP_SINK_COUNT_ESI 0x2002 /* same as 0x200 */
+#define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 0x2003 /* same as 0x201 */
+
+#define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI1 0x2004 /* 1.2 */
+# define DP_RX_GTC_MSTR_REQ_STATUS_CHANGE (1 << 0)
+# define DP_LOCK_ACQUISITION_REQUEST (1 << 1)
+# define DP_CEC_IRQ (1 << 2)
+
+#define DP_LINK_SERVICE_IRQ_VECTOR_ESI0 0x2005 /* 1.2 */
+# define RX_CAP_CHANGED (1 << 0)
+# define LINK_STATUS_CHANGED (1 << 1)
+# define STREAM_STATUS_CHANGED (1 << 2)
+# define HDMI_LINK_STATUS_CHANGED (1 << 3)
+# define CONNECTED_OFF_ENTRY_REQUESTED (1 << 4)
+
+#define DP_PSR_ERROR_STATUS 0x2006 /* XXX 1.2? */
+# define DP_PSR_LINK_CRC_ERROR (1 << 0)
+# define DP_PSR_RFB_STORAGE_ERROR (1 << 1)
+# define DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR (1 << 2) /* eDP 1.4 */
+
+#define DP_PSR_ESI 0x2007 /* XXX 1.2? */
+# define DP_PSR_CAPS_CHANGE (1 << 0)
+
+#define DP_PSR_STATUS 0x2008 /* XXX 1.2? */
+# define DP_PSR_SINK_INACTIVE 0
+# define DP_PSR_SINK_ACTIVE_SRC_SYNCED 1
+# define DP_PSR_SINK_ACTIVE_RFB 2
+# define DP_PSR_SINK_ACTIVE_SINK_SYNCED 3
+# define DP_PSR_SINK_ACTIVE_RESYNC 4
+# define DP_PSR_SINK_INTERNAL_ERROR 7
+# define DP_PSR_SINK_STATE_MASK 0x07
+
+#define DP_SYNCHRONIZATION_LATENCY_IN_SINK 0x2009 /* edp 1.4 */
+# define DP_MAX_RESYNC_FRAME_COUNT_MASK (0xf << 0)
+# define DP_MAX_RESYNC_FRAME_COUNT_SHIFT 0
+# define DP_LAST_ACTUAL_SYNCHRONIZATION_LATENCY_MASK (0xf << 4)
+# define DP_LAST_ACTUAL_SYNCHRONIZATION_LATENCY_SHIFT 4
+
+#define DP_LAST_RECEIVED_PSR_SDP 0x200a /* eDP 1.2 */
+# define DP_PSR_STATE_BIT (1 << 0) /* eDP 1.2 */
+# define DP_UPDATE_RFB_BIT (1 << 1) /* eDP 1.2 */
+# define DP_CRC_VALID_BIT (1 << 2) /* eDP 1.2 */
+# define DP_SU_VALID (1 << 3) /* eDP 1.4 */
+# define DP_FIRST_SCAN_LINE_SU_REGION (1 << 4) /* eDP 1.4 */
+# define DP_LAST_SCAN_LINE_SU_REGION (1 << 5) /* eDP 1.4 */
+# define DP_Y_COORDINATE_VALID (1 << 6) /* eDP 1.4a */
+
+#define DP_RECEIVER_ALPM_STATUS 0x200b /* eDP 1.4 */
+# define DP_ALPM_LOCK_TIMEOUT_ERROR (1 << 0)
+
+#define DP_LANE0_1_STATUS_ESI 0x200c /* status same as 0x202 */
+#define DP_LANE2_3_STATUS_ESI 0x200d /* status same as 0x203 */
+#define DP_LANE_ALIGN_STATUS_UPDATED_ESI 0x200e /* status same as 0x204 */
+#define DP_SINK_STATUS_ESI 0x200f /* status same as 0x205 */
+
+/* Extended Receiver Capability: See DP_DPCD_REV for definitions */
+#define DP_DP13_DPCD_REV 0x2200
+
+#define DP_DPRX_FEATURE_ENUMERATION_LIST 0x2210 /* DP 1.3 */
+# define DP_GTC_CAP (1 << 0) /* DP 1.3 */
+# define DP_SST_SPLIT_SDP_CAP (1 << 1) /* DP 1.4 */
+# define DP_AV_SYNC_CAP (1 << 2) /* DP 1.3 */
+# define DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED (1 << 3) /* DP 1.3 */
+# define DP_VSC_EXT_VESA_SDP_SUPPORTED (1 << 4) /* DP 1.4 */
+# define DP_VSC_EXT_VESA_SDP_CHAINING_SUPPORTED (1 << 5) /* DP 1.4 */
+# define DP_VSC_EXT_CEA_SDP_SUPPORTED (1 << 6) /* DP 1.4 */
+# define DP_VSC_EXT_CEA_SDP_CHAINING_SUPPORTED (1 << 7) /* DP 1.4 */
+
+#define DP_128B132B_SUPPORTED_LINK_RATES 0x2215 /* 2.0 */
+# define DP_UHBR10 (1 << 0)
+# define DP_UHBR20 (1 << 1)
+# define DP_UHBR13_5 (1 << 2)
+
+#define DP_128B132B_TRAINING_AUX_RD_INTERVAL 0x2216 /* 2.0 */
+# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_1MS_UNIT (1 << 7)
+# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_MASK 0x7f
+# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_400_US 0x00
+# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_4_MS 0x01
+# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_8_MS 0x02
+# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_12_MS 0x03
+# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_16_MS 0x04
+# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_32_MS 0x05
+# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_64_MS 0x06
+
+#define DP_TEST_264BIT_CUSTOM_PATTERN_7_0 0x2230
+#define DP_TEST_264BIT_CUSTOM_PATTERN_263_256 0x2250
+
+/* DSC Extended Capability Branch Total DSC Resources */
+#define DP_DSC_SUPPORT_AND_DSC_DECODER_COUNT 0x2260 /* 2.0 */
+# define DP_DSC_DECODER_COUNT_MASK (0b111 << 5)
+# define DP_DSC_DECODER_COUNT_SHIFT 5
+#define DP_DSC_MAX_SLICE_COUNT_AND_AGGREGATION_0 0x2270 /* 2.0 */
+# define DP_DSC_DECODER_0_MAXIMUM_SLICE_COUNT_MASK (1 << 0)
+# define DP_DSC_DECODER_0_AGGREGATION_SUPPORT_MASK (0b111 << 1)
+# define DP_DSC_DECODER_0_AGGREGATION_SUPPORT_SHIFT 1
+
+/* Protocol Converter Extension */
+/* HDMI CEC tunneling over AUX DP 1.3 section 5.3.3.3.1 DPCD 1.4+ */
+#define DP_CEC_TUNNELING_CAPABILITY 0x3000
+# define DP_CEC_TUNNELING_CAPABLE (1 << 0)
+# define DP_CEC_SNOOPING_CAPABLE (1 << 1)
+# define DP_CEC_MULTIPLE_LA_CAPABLE (1 << 2)
+
+#define DP_CEC_TUNNELING_CONTROL 0x3001
+# define DP_CEC_TUNNELING_ENABLE (1 << 0)
+# define DP_CEC_SNOOPING_ENABLE (1 << 1)
+
+#define DP_CEC_RX_MESSAGE_INFO 0x3002
+# define DP_CEC_RX_MESSAGE_LEN_MASK (0xf << 0)
+# define DP_CEC_RX_MESSAGE_LEN_SHIFT 0
+# define DP_CEC_RX_MESSAGE_HPD_STATE (1 << 4)
+# define DP_CEC_RX_MESSAGE_HPD_LOST (1 << 5)
+# define DP_CEC_RX_MESSAGE_ACKED (1 << 6)
+# define DP_CEC_RX_MESSAGE_ENDED (1 << 7)
+
+#define DP_CEC_TX_MESSAGE_INFO 0x3003
+# define DP_CEC_TX_MESSAGE_LEN_MASK (0xf << 0)
+# define DP_CEC_TX_MESSAGE_LEN_SHIFT 0
+# define DP_CEC_TX_RETRY_COUNT_MASK (0x7 << 4)
+# define DP_CEC_TX_RETRY_COUNT_SHIFT 4
+# define DP_CEC_TX_MESSAGE_SEND (1 << 7)
+
+#define DP_CEC_TUNNELING_IRQ_FLAGS 0x3004
+# define DP_CEC_RX_MESSAGE_INFO_VALID (1 << 0)
+# define DP_CEC_RX_MESSAGE_OVERFLOW (1 << 1)
+# define DP_CEC_TX_MESSAGE_SENT (1 << 4)
+# define DP_CEC_TX_LINE_ERROR (1 << 5)
+# define DP_CEC_TX_ADDRESS_NACK_ERROR (1 << 6)
+# define DP_CEC_TX_DATA_NACK_ERROR (1 << 7)
+
+#define DP_CEC_LOGICAL_ADDRESS_MASK 0x300E /* 0x300F word */
+# define DP_CEC_LOGICAL_ADDRESS_0 (1 << 0)
+# define DP_CEC_LOGICAL_ADDRESS_1 (1 << 1)
+# define DP_CEC_LOGICAL_ADDRESS_2 (1 << 2)
+# define DP_CEC_LOGICAL_ADDRESS_3 (1 << 3)
+# define DP_CEC_LOGICAL_ADDRESS_4 (1 << 4)
+# define DP_CEC_LOGICAL_ADDRESS_5 (1 << 5)
+# define DP_CEC_LOGICAL_ADDRESS_6 (1 << 6)
+# define DP_CEC_LOGICAL_ADDRESS_7 (1 << 7)
+#define DP_CEC_LOGICAL_ADDRESS_MASK_2 0x300F /* 0x300E word */
+# define DP_CEC_LOGICAL_ADDRESS_8 (1 << 0)
+# define DP_CEC_LOGICAL_ADDRESS_9 (1 << 1)
+# define DP_CEC_LOGICAL_ADDRESS_10 (1 << 2)
+# define DP_CEC_LOGICAL_ADDRESS_11 (1 << 3)
+# define DP_CEC_LOGICAL_ADDRESS_12 (1 << 4)
+# define DP_CEC_LOGICAL_ADDRESS_13 (1 << 5)
+# define DP_CEC_LOGICAL_ADDRESS_14 (1 << 6)
+# define DP_CEC_LOGICAL_ADDRESS_15 (1 << 7)
+
+#define DP_CEC_RX_MESSAGE_BUFFER 0x3010
+#define DP_CEC_TX_MESSAGE_BUFFER 0x3020
+#define DP_CEC_MESSAGE_BUFFER_LENGTH 0x10
+
+/* PCON CONFIGURE-1 FRL FOR HDMI SINK */
+#define DP_PCON_HDMI_LINK_CONFIG_1 0x305A
+# define DP_PCON_ENABLE_MAX_FRL_BW (7 << 0)
+# define DP_PCON_ENABLE_MAX_BW_0GBPS 0
+# define DP_PCON_ENABLE_MAX_BW_9GBPS 1
+# define DP_PCON_ENABLE_MAX_BW_18GBPS 2
+# define DP_PCON_ENABLE_MAX_BW_24GBPS 3
+# define DP_PCON_ENABLE_MAX_BW_32GBPS 4
+# define DP_PCON_ENABLE_MAX_BW_40GBPS 5
+# define DP_PCON_ENABLE_MAX_BW_48GBPS 6
+# define DP_PCON_ENABLE_SOURCE_CTL_MODE (1 << 3)
+# define DP_PCON_ENABLE_CONCURRENT_LINK (1 << 4)
+# define DP_PCON_ENABLE_SEQUENTIAL_LINK (0 << 4)
+# define DP_PCON_ENABLE_LINK_FRL_MODE (1 << 5)
+# define DP_PCON_ENABLE_HPD_READY (1 << 6)
+# define DP_PCON_ENABLE_HDMI_LINK (1 << 7)
+
+/* PCON CONFIGURE-2 FRL FOR HDMI SINK */
+#define DP_PCON_HDMI_LINK_CONFIG_2 0x305B
+# define DP_PCON_MAX_LINK_BW_MASK (0x3F << 0)
+# define DP_PCON_FRL_BW_MASK_9GBPS (1 << 0)
+# define DP_PCON_FRL_BW_MASK_18GBPS (1 << 1)
+# define DP_PCON_FRL_BW_MASK_24GBPS (1 << 2)
+# define DP_PCON_FRL_BW_MASK_32GBPS (1 << 3)
+# define DP_PCON_FRL_BW_MASK_40GBPS (1 << 4)
+# define DP_PCON_FRL_BW_MASK_48GBPS (1 << 5)
+# define DP_PCON_FRL_LINK_TRAIN_EXTENDED (1 << 6)
+# define DP_PCON_FRL_LINK_TRAIN_NORMAL (0 << 6)
+
+/* PCON HDMI LINK STATUS */
+#define DP_PCON_HDMI_TX_LINK_STATUS 0x303B
+# define DP_PCON_HDMI_TX_LINK_ACTIVE (1 << 0)
+# define DP_PCON_FRL_READY (1 << 1)
+
+/* PCON HDMI POST FRL STATUS */
+#define DP_PCON_HDMI_POST_FRL_STATUS 0x3036
+# define DP_PCON_HDMI_LINK_MODE (1 << 0)
+# define DP_PCON_HDMI_MODE_TMDS 0
+# define DP_PCON_HDMI_MODE_FRL 1
+# define DP_PCON_HDMI_FRL_TRAINED_BW (0x3F << 1)
+# define DP_PCON_FRL_TRAINED_BW_9GBPS (1 << 1)
+# define DP_PCON_FRL_TRAINED_BW_18GBPS (1 << 2)
+# define DP_PCON_FRL_TRAINED_BW_24GBPS (1 << 3)
+# define DP_PCON_FRL_TRAINED_BW_32GBPS (1 << 4)
+# define DP_PCON_FRL_TRAINED_BW_40GBPS (1 << 5)
+# define DP_PCON_FRL_TRAINED_BW_48GBPS (1 << 6)
+
+#define DP_PROTOCOL_CONVERTER_CONTROL_0 0x3050 /* DP 1.3 */
+# define DP_HDMI_DVI_OUTPUT_CONFIG (1 << 0) /* DP 1.3 */
+#define DP_PROTOCOL_CONVERTER_CONTROL_1 0x3051 /* DP 1.3 */
+# define DP_CONVERSION_TO_YCBCR420_ENABLE (1 << 0) /* DP 1.3 */
+# define DP_HDMI_EDID_PROCESSING_DISABLE (1 << 1) /* DP 1.4 */
+# define DP_HDMI_AUTONOMOUS_SCRAMBLING_DISABLE (1 << 2) /* DP 1.4 */
+# define DP_HDMI_FORCE_SCRAMBLING (1 << 3) /* DP 1.4 */
+#define DP_PROTOCOL_CONVERTER_CONTROL_2 0x3052 /* DP 1.3 */
+# define DP_CONVERSION_TO_YCBCR422_ENABLE (1 << 0) /* DP 1.3 */
+# define DP_PCON_ENABLE_DSC_ENCODER (1 << 1)
+# define DP_PCON_ENCODER_PPS_OVERRIDE_MASK (0x3 << 2)
+# define DP_PCON_ENC_PPS_OVERRIDE_DISABLED 0
+# define DP_PCON_ENC_PPS_OVERRIDE_EN_PARAMS 1
+# define DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER 2
+# define DP_CONVERSION_RGB_YCBCR_MASK (7 << 4)
+# define DP_CONVERSION_BT601_RGB_YCBCR_ENABLE (1 << 4)
+# define DP_CONVERSION_BT709_RGB_YCBCR_ENABLE (1 << 5)
+# define DP_CONVERSION_BT2020_RGB_YCBCR_ENABLE (1 << 6)
+
+/* PCON Downstream HDMI ERROR Status per Lane */
+#define DP_PCON_HDMI_ERROR_STATUS_LN0 0x3037
+#define DP_PCON_HDMI_ERROR_STATUS_LN1 0x3038
+#define DP_PCON_HDMI_ERROR_STATUS_LN2 0x3039
+#define DP_PCON_HDMI_ERROR_STATUS_LN3 0x303A
+# define DP_PCON_HDMI_ERROR_COUNT_MASK (0x7 << 0)
+# define DP_PCON_HDMI_ERROR_COUNT_THREE_PLUS (1 << 0)
+# define DP_PCON_HDMI_ERROR_COUNT_TEN_PLUS (1 << 1)
+# define DP_PCON_HDMI_ERROR_COUNT_HUNDRED_PLUS (1 << 2)
+
+/* PCON HDMI CONFIG PPS Override Buffer
+ * Valid Offsets to be added to Base : 0-127
+ */
+#define DP_PCON_HDMI_PPS_OVERRIDE_BASE 0x3100
+
+/* PCON HDMI CONFIG PPS Override Parameter: Slice height
+ * Offset-0 8LSBs of the Slice height.
+ * Offset-1 8MSBs of the Slice height.
+ */
+#define DP_PCON_HDMI_PPS_OVRD_SLICE_HEIGHT 0x3180
+
+/* PCON HDMI CONFIG PPS Override Parameter: Slice width
+ * Offset-0 8LSBs of the Slice width.
+ * Offset-1 8MSBs of the Slice width.
+ */
+#define DP_PCON_HDMI_PPS_OVRD_SLICE_WIDTH 0x3182
+
+/* PCON HDMI CONFIG PPS Override Parameter: bits_per_pixel
+ * Offset-0 8LSBs of the bits_per_pixel.
+ * Offset-1 2MSBs of the bits_per_pixel.
+ */
+#define DP_PCON_HDMI_PPS_OVRD_BPP 0x3184
+
+/* HDCP 1.3 and HDCP 2.2 */
+#define DP_AUX_HDCP_BKSV 0x68000
+#define DP_AUX_HDCP_RI_PRIME 0x68005
+#define DP_AUX_HDCP_AKSV 0x68007
+#define DP_AUX_HDCP_AN 0x6800C
+#define DP_AUX_HDCP_V_PRIME(h) (0x68014 + h * 4)
+#define DP_AUX_HDCP_BCAPS 0x68028
+# define DP_BCAPS_REPEATER_PRESENT BIT(1)
+# define DP_BCAPS_HDCP_CAPABLE BIT(0)
+#define DP_AUX_HDCP_BSTATUS 0x68029
+# define DP_BSTATUS_REAUTH_REQ BIT(3)
+# define DP_BSTATUS_LINK_FAILURE BIT(2)
+# define DP_BSTATUS_R0_PRIME_READY BIT(1)
+# define DP_BSTATUS_READY BIT(0)
+#define DP_AUX_HDCP_BINFO 0x6802A
+#define DP_AUX_HDCP_KSV_FIFO 0x6802C
+#define DP_AUX_HDCP_AINFO 0x6803B
+
+/* DP HDCP2.2 parameter offsets in DPCD address space */
+#define DP_HDCP_2_2_REG_RTX_OFFSET 0x69000
+#define DP_HDCP_2_2_REG_TXCAPS_OFFSET 0x69008
+#define DP_HDCP_2_2_REG_CERT_RX_OFFSET 0x6900B
+#define DP_HDCP_2_2_REG_RRX_OFFSET 0x69215
+#define DP_HDCP_2_2_REG_RX_CAPS_OFFSET 0x6921D
+#define DP_HDCP_2_2_REG_EKPUB_KM_OFFSET 0x69220
+#define DP_HDCP_2_2_REG_EKH_KM_WR_OFFSET 0x692A0
+#define DP_HDCP_2_2_REG_M_OFFSET 0x692B0
+#define DP_HDCP_2_2_REG_HPRIME_OFFSET 0x692C0
+#define DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET 0x692E0
+#define DP_HDCP_2_2_REG_RN_OFFSET 0x692F0
+#define DP_HDCP_2_2_REG_LPRIME_OFFSET 0x692F8
+#define DP_HDCP_2_2_REG_EDKEY_KS_OFFSET 0x69318
+#define DP_HDCP_2_2_REG_RIV_OFFSET 0x69328
+#define DP_HDCP_2_2_REG_RXINFO_OFFSET 0x69330
+#define DP_HDCP_2_2_REG_SEQ_NUM_V_OFFSET 0x69332
+#define DP_HDCP_2_2_REG_VPRIME_OFFSET 0x69335
+#define DP_HDCP_2_2_REG_RECV_ID_LIST_OFFSET 0x69345
+#define DP_HDCP_2_2_REG_V_OFFSET 0x693E0
+#define DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET 0x693F0
+#define DP_HDCP_2_2_REG_K_OFFSET 0x693F3
+#define DP_HDCP_2_2_REG_STREAM_ID_TYPE_OFFSET 0x693F5
+#define DP_HDCP_2_2_REG_MPRIME_OFFSET 0x69473
+#define DP_HDCP_2_2_REG_RXSTATUS_OFFSET 0x69493
+#define DP_HDCP_2_2_REG_STREAM_TYPE_OFFSET 0x69494
+#define DP_HDCP_2_2_REG_DBG_OFFSET 0x69518
+
+/* LTTPR: Link Training (LT)-tunable PHY Repeaters */
+#define DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV 0xf0000 /* 1.3 */
+#define DP_MAX_LINK_RATE_PHY_REPEATER 0xf0001 /* 1.4a */
+#define DP_PHY_REPEATER_CNT 0xf0002 /* 1.3 */
+#define DP_PHY_REPEATER_MODE 0xf0003 /* 1.3 */
+#define DP_MAX_LANE_COUNT_PHY_REPEATER 0xf0004 /* 1.4a */
+#define DP_Repeater_FEC_CAPABILITY 0xf0004 /* 1.4 */
+#define DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT 0xf0005 /* 1.4a */
+#define DP_MAIN_LINK_CHANNEL_CODING_PHY_REPEATER 0xf0006 /* 2.0 */
+# define DP_PHY_REPEATER_128B132B_SUPPORTED (1 << 0)
+/* See DP_128B132B_SUPPORTED_LINK_RATES for values */
+#define DP_PHY_REPEATER_128B132B_RATES 0xf0007 /* 2.0 */
+#define DP_PHY_REPEATER_EQ_DONE 0xf0008 /* 2.0 E11 */
+
+enum drm_dp_phy {
+ DP_PHY_DPRX,
+
+ DP_PHY_LTTPR1,
+ DP_PHY_LTTPR2,
+ DP_PHY_LTTPR3,
+ DP_PHY_LTTPR4,
+ DP_PHY_LTTPR5,
+ DP_PHY_LTTPR6,
+ DP_PHY_LTTPR7,
+ DP_PHY_LTTPR8,
+
+ DP_MAX_LTTPR_COUNT = DP_PHY_LTTPR8,
+};
+
+#define DP_PHY_LTTPR(i) (DP_PHY_LTTPR1 + (i))
+
+#define __DP_LTTPR1_BASE 0xf0010 /* 1.3 */
+#define __DP_LTTPR2_BASE 0xf0060 /* 1.3 */
+#define DP_LTTPR_BASE(dp_phy) \
+ (__DP_LTTPR1_BASE + (__DP_LTTPR2_BASE - __DP_LTTPR1_BASE) * \
+ ((dp_phy) - DP_PHY_LTTPR1))
+
+#define DP_LTTPR_REG(dp_phy, lttpr1_reg) \
+ (DP_LTTPR_BASE(dp_phy) - DP_LTTPR_BASE(DP_PHY_LTTPR1) + (lttpr1_reg))
+
+#define DP_TRAINING_PATTERN_SET_PHY_REPEATER1 0xf0010 /* 1.3 */
+#define DP_TRAINING_PATTERN_SET_PHY_REPEATER(dp_phy) \
+ DP_LTTPR_REG(dp_phy, DP_TRAINING_PATTERN_SET_PHY_REPEATER1)
+
+#define DP_TRAINING_LANE0_SET_PHY_REPEATER1 0xf0011 /* 1.3 */
+#define DP_TRAINING_LANE0_SET_PHY_REPEATER(dp_phy) \
+ DP_LTTPR_REG(dp_phy, DP_TRAINING_LANE0_SET_PHY_REPEATER1)
+
+#define DP_TRAINING_LANE1_SET_PHY_REPEATER1 0xf0012 /* 1.3 */
+#define DP_TRAINING_LANE2_SET_PHY_REPEATER1 0xf0013 /* 1.3 */
+#define DP_TRAINING_LANE3_SET_PHY_REPEATER1 0xf0014 /* 1.3 */
+#define DP_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1 0xf0020 /* 1.4a */
+#define DP_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER(dp_phy) \
+ DP_LTTPR_REG(dp_phy, DP_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1)
+
+#define DP_TRANSMITTER_CAPABILITY_PHY_REPEATER1 0xf0021 /* 1.4a */
+# define DP_VOLTAGE_SWING_LEVEL_3_SUPPORTED BIT(0)
+# define DP_PRE_EMPHASIS_LEVEL_3_SUPPORTED BIT(1)
+
+#define DP_128B132B_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1 0xf0022 /* 2.0 */
+#define DP_128B132B_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER(dp_phy) \
+ DP_LTTPR_REG(dp_phy, DP_128B132B_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1)
+/* see DP_128B132B_TRAINING_AUX_RD_INTERVAL for values */
+
+#define DP_LANE0_1_STATUS_PHY_REPEATER1 0xf0030 /* 1.3 */
+#define DP_LANE0_1_STATUS_PHY_REPEATER(dp_phy) \
+ DP_LTTPR_REG(dp_phy, DP_LANE0_1_STATUS_PHY_REPEATER1)
+
+#define DP_LANE2_3_STATUS_PHY_REPEATER1 0xf0031 /* 1.3 */
+
+#define DP_LANE_ALIGN_STATUS_UPDATED_PHY_REPEATER1 0xf0032 /* 1.3 */
+#define DP_ADJUST_REQUEST_LANE0_1_PHY_REPEATER1 0xf0033 /* 1.3 */
+#define DP_ADJUST_REQUEST_LANE2_3_PHY_REPEATER1 0xf0034 /* 1.3 */
+#define DP_SYMBOL_ERROR_COUNT_LANE0_PHY_REPEATER1 0xf0035 /* 1.3 */
+#define DP_SYMBOL_ERROR_COUNT_LANE1_PHY_REPEATER1 0xf0037 /* 1.3 */
+#define DP_SYMBOL_ERROR_COUNT_LANE2_PHY_REPEATER1 0xf0039 /* 1.3 */
+#define DP_SYMBOL_ERROR_COUNT_LANE3_PHY_REPEATER1 0xf003b /* 1.3 */
+
+#define __DP_FEC1_BASE 0xf0290 /* 1.4 */
+#define __DP_FEC2_BASE 0xf0298 /* 1.4 */
+#define DP_FEC_BASE(dp_phy) \
+ (__DP_FEC1_BASE + ((__DP_FEC2_BASE - __DP_FEC1_BASE) * \
+ ((dp_phy) - DP_PHY_LTTPR1)))
+
+#define DP_FEC_REG(dp_phy, fec1_reg) \
+ (DP_FEC_BASE(dp_phy) - DP_FEC_BASE(DP_PHY_LTTPR1) + fec1_reg)
+
+#define DP_FEC_STATUS_PHY_REPEATER1 0xf0290 /* 1.4 */
+#define DP_FEC_STATUS_PHY_REPEATER(dp_phy) \
+ DP_FEC_REG(dp_phy, DP_FEC_STATUS_PHY_REPEATER1)
+
+#define DP_FEC_ERROR_COUNT_PHY_REPEATER1 0xf0291 /* 1.4 */
+#define DP_FEC_CAPABILITY_PHY_REPEATER1 0xf0294 /* 1.4a */
+
+#define DP_LTTPR_MAX_ADD 0xf02ff /* 1.4 */
+
+#define DP_DPCD_MAX_ADD 0xfffff /* 1.4 */
+
+/* Repeater modes */
+#define DP_PHY_REPEATER_MODE_TRANSPARENT 0x55 /* 1.3 */
+#define DP_PHY_REPEATER_MODE_NON_TRANSPARENT 0xaa /* 1.3 */
+
+/* DP HDCP message start offsets in DPCD address space */
+#define DP_HDCP_2_2_AKE_INIT_OFFSET DP_HDCP_2_2_REG_RTX_OFFSET
+#define DP_HDCP_2_2_AKE_SEND_CERT_OFFSET DP_HDCP_2_2_REG_CERT_RX_OFFSET
+#define DP_HDCP_2_2_AKE_NO_STORED_KM_OFFSET DP_HDCP_2_2_REG_EKPUB_KM_OFFSET
+#define DP_HDCP_2_2_AKE_STORED_KM_OFFSET DP_HDCP_2_2_REG_EKH_KM_WR_OFFSET
+#define DP_HDCP_2_2_AKE_SEND_HPRIME_OFFSET DP_HDCP_2_2_REG_HPRIME_OFFSET
+#define DP_HDCP_2_2_AKE_SEND_PAIRING_INFO_OFFSET \
+ DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET
+#define DP_HDCP_2_2_LC_INIT_OFFSET DP_HDCP_2_2_REG_RN_OFFSET
+#define DP_HDCP_2_2_LC_SEND_LPRIME_OFFSET DP_HDCP_2_2_REG_LPRIME_OFFSET
+#define DP_HDCP_2_2_SKE_SEND_EKS_OFFSET DP_HDCP_2_2_REG_EDKEY_KS_OFFSET
+#define DP_HDCP_2_2_REP_SEND_RECVID_LIST_OFFSET DP_HDCP_2_2_REG_RXINFO_OFFSET
+#define DP_HDCP_2_2_REP_SEND_ACK_OFFSET DP_HDCP_2_2_REG_V_OFFSET
+#define DP_HDCP_2_2_REP_STREAM_MANAGE_OFFSET DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET
+#define DP_HDCP_2_2_REP_STREAM_READY_OFFSET DP_HDCP_2_2_REG_MPRIME_OFFSET
+
+#define HDCP_2_2_DP_RXSTATUS_LEN 1
+#define HDCP_2_2_DP_RXSTATUS_READY(x) ((x) & BIT(0))
+#define HDCP_2_2_DP_RXSTATUS_H_PRIME(x) ((x) & BIT(1))
+#define HDCP_2_2_DP_RXSTATUS_PAIRING(x) ((x) & BIT(2))
+#define HDCP_2_2_DP_RXSTATUS_REAUTH_REQ(x) ((x) & BIT(3))
+#define HDCP_2_2_DP_RXSTATUS_LINK_FAILED(x) ((x) & BIT(4))
+
+/* DP 1.2 Sideband message defines */
+/* peer device type - DP 1.2a Table 2-92 */
+#define DP_PEER_DEVICE_NONE 0x0
+#define DP_PEER_DEVICE_SOURCE_OR_SST 0x1
+#define DP_PEER_DEVICE_MST_BRANCHING 0x2
+#define DP_PEER_DEVICE_SST_SINK 0x3
+#define DP_PEER_DEVICE_DP_LEGACY_CONV 0x4
+
+/* DP 1.2 MST sideband request names DP 1.2a Table 2-80 */
+#define DP_GET_MSG_TRANSACTION_VERSION 0x00 /* DP 1.3 */
+#define DP_LINK_ADDRESS 0x01
+#define DP_CONNECTION_STATUS_NOTIFY 0x02
+#define DP_ENUM_PATH_RESOURCES 0x10
+#define DP_ALLOCATE_PAYLOAD 0x11
+#define DP_QUERY_PAYLOAD 0x12
+#define DP_RESOURCE_STATUS_NOTIFY 0x13
+#define DP_CLEAR_PAYLOAD_ID_TABLE 0x14
+#define DP_REMOTE_DPCD_READ 0x20
+#define DP_REMOTE_DPCD_WRITE 0x21
+#define DP_REMOTE_I2C_READ 0x22
+#define DP_REMOTE_I2C_WRITE 0x23
+#define DP_POWER_UP_PHY 0x24
+#define DP_POWER_DOWN_PHY 0x25
+#define DP_SINK_EVENT_NOTIFY 0x30
+#define DP_QUERY_STREAM_ENC_STATUS 0x38
+#define DP_QUERY_STREAM_ENC_STATUS_STATE_NO_EXIST 0
+#define DP_QUERY_STREAM_ENC_STATUS_STATE_INACTIVE 1
+#define DP_QUERY_STREAM_ENC_STATUS_STATE_ACTIVE 2
+
+/* DP 1.2 MST sideband reply types */
+#define DP_SIDEBAND_REPLY_ACK 0x00
+#define DP_SIDEBAND_REPLY_NAK 0x01
+
+/* DP 1.2 MST sideband nak reasons - table 2.84 */
+#define DP_NAK_WRITE_FAILURE 0x01
+#define DP_NAK_INVALID_READ 0x02
+#define DP_NAK_CRC_FAILURE 0x03
+#define DP_NAK_BAD_PARAM 0x04
+#define DP_NAK_DEFER 0x05
+#define DP_NAK_LINK_FAILURE 0x06
+#define DP_NAK_NO_RESOURCES 0x07
+#define DP_NAK_DPCD_FAIL 0x08
+#define DP_NAK_I2C_NAK 0x09
+#define DP_NAK_ALLOCATE_FAIL 0x0a
+
+#define MODE_I2C_START 1
+#define MODE_I2C_WRITE 2
+#define MODE_I2C_READ 4
+#define MODE_I2C_STOP 8
+
+/* DP 1.2 MST PORTs - Section 2.5.1 v1.2a spec */
+#define DP_MST_PHYSICAL_PORT_0 0
+#define DP_MST_LOGICAL_PORT_0 8
+
+#define DP_LINK_CONSTANT_N_VALUE 0x8000
+#define DP_LINK_STATUS_SIZE 6
+
+#define DP_BRANCH_OUI_HEADER_SIZE 0xc
+#define DP_RECEIVER_CAP_SIZE 0xf
+#define DP_DSC_RECEIVER_CAP_SIZE 0x10 /* DSC Capabilities 0x60 through 0x6F */
+#define EDP_PSR_RECEIVER_CAP_SIZE 2
+#define EDP_DISPLAY_CTL_CAP_SIZE 3
+#define DP_LTTPR_COMMON_CAP_SIZE 8
+#define DP_LTTPR_PHY_CAP_SIZE 3
+
+#define DP_SDP_AUDIO_TIMESTAMP 0x01
+#define DP_SDP_AUDIO_STREAM 0x02
+#define DP_SDP_EXTENSION 0x04 /* DP 1.1 */
+#define DP_SDP_AUDIO_COPYMANAGEMENT 0x05 /* DP 1.2 */
+#define DP_SDP_ISRC 0x06 /* DP 1.2 */
+#define DP_SDP_VSC 0x07 /* DP 1.2 */
+#define DP_SDP_CAMERA_GENERIC(i) (0x08 + (i)) /* 0-7, DP 1.3 */
+#define DP_SDP_PPS 0x10 /* DP 1.4 */
+#define DP_SDP_VSC_EXT_VESA 0x20 /* DP 1.4 */
+#define DP_SDP_VSC_EXT_CEA 0x21 /* DP 1.4 */
+/* 0x80+ CEA-861 infoframe types */
+
+#define DP_SDP_AUDIO_INFOFRAME_HB2 0x1b
+
+/**
+ * struct dp_sdp_header - DP secondary data packet header
+ * @HB0: Secondary Data Packet ID
+ * @HB1: Secondary Data Packet Type
+ * @HB2: Secondary Data Packet Specific header, Byte 0
+ * @HB3: Secondary Data packet Specific header, Byte 1
+ */
+struct dp_sdp_header {
+ u8 HB0;
+ u8 HB1;
+ u8 HB2;
+ u8 HB3;
+} __packed;
+
+#define EDP_SDP_HEADER_REVISION_MASK 0x1F
+#define EDP_SDP_HEADER_VALID_PAYLOAD_BYTES 0x1F
+#define DP_SDP_PPS_HEADER_PAYLOAD_BYTES_MINUS_1 0x7F
+
+/**
+ * struct dp_sdp - DP secondary data packet
+ * @sdp_header: DP secondary data packet header
+ * @db: DP secondaray data packet data blocks
+ * VSC SDP Payload for PSR
+ * db[0]: Stereo Interface
+ * db[1]: 0 - PSR State; 1 - Update RFB; 2 - CRC Valid
+ * db[2]: CRC value bits 7:0 of the R or Cr component
+ * db[3]: CRC value bits 15:8 of the R or Cr component
+ * db[4]: CRC value bits 7:0 of the G or Y component
+ * db[5]: CRC value bits 15:8 of the G or Y component
+ * db[6]: CRC value bits 7:0 of the B or Cb component
+ * db[7]: CRC value bits 15:8 of the B or Cb component
+ * db[8] - db[31]: Reserved
+ * VSC SDP Payload for Pixel Encoding/Colorimetry Format
+ * db[0] - db[15]: Reserved
+ * db[16]: Pixel Encoding and Colorimetry Formats
+ * db[17]: Dynamic Range and Component Bit Depth
+ * db[18]: Content Type
+ * db[19] - db[31]: Reserved
+ */
+struct dp_sdp {
+ struct dp_sdp_header sdp_header;
+ u8 db[32];
+} __packed;
+
+#define EDP_VSC_PSR_STATE_ACTIVE (1<<0)
+#define EDP_VSC_PSR_UPDATE_RFB (1<<1)
+#define EDP_VSC_PSR_CRC_VALUES_VALID (1<<2)
+
+/**
+ * enum dp_pixelformat - drm DP Pixel encoding formats
+ *
+ * This enum is used to indicate DP VSC SDP Pixel encoding formats.
+ * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through
+ * DB18]
+ *
+ * @DP_PIXELFORMAT_RGB: RGB pixel encoding format
+ * @DP_PIXELFORMAT_YUV444: YCbCr 4:4:4 pixel encoding format
+ * @DP_PIXELFORMAT_YUV422: YCbCr 4:2:2 pixel encoding format
+ * @DP_PIXELFORMAT_YUV420: YCbCr 4:2:0 pixel encoding format
+ * @DP_PIXELFORMAT_Y_ONLY: Y Only pixel encoding format
+ * @DP_PIXELFORMAT_RAW: RAW pixel encoding format
+ * @DP_PIXELFORMAT_RESERVED: Reserved pixel encoding format
+ */
+enum dp_pixelformat {
+ DP_PIXELFORMAT_RGB = 0,
+ DP_PIXELFORMAT_YUV444 = 0x1,
+ DP_PIXELFORMAT_YUV422 = 0x2,
+ DP_PIXELFORMAT_YUV420 = 0x3,
+ DP_PIXELFORMAT_Y_ONLY = 0x4,
+ DP_PIXELFORMAT_RAW = 0x5,
+ DP_PIXELFORMAT_RESERVED = 0x6,
+};
+
+/**
+ * enum dp_colorimetry - drm DP Colorimetry formats
+ *
+ * This enum is used to indicate DP VSC SDP Colorimetry formats.
+ * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through
+ * DB18] and a name of enum member follows DRM_MODE_COLORIMETRY definition.
+ *
+ * @DP_COLORIMETRY_DEFAULT: sRGB (IEC 61966-2-1) or
+ * ITU-R BT.601 colorimetry format
+ * @DP_COLORIMETRY_RGB_WIDE_FIXED: RGB wide gamut fixed point colorimetry format
+ * @DP_COLORIMETRY_BT709_YCC: ITU-R BT.709 colorimetry format
+ * @DP_COLORIMETRY_RGB_WIDE_FLOAT: RGB wide gamut floating point
+ * (scRGB (IEC 61966-2-2)) colorimetry format
+ * @DP_COLORIMETRY_XVYCC_601: xvYCC601 colorimetry format
+ * @DP_COLORIMETRY_OPRGB: OpRGB colorimetry format
+ * @DP_COLORIMETRY_XVYCC_709: xvYCC709 colorimetry format
+ * @DP_COLORIMETRY_DCI_P3_RGB: DCI-P3 (SMPTE RP 431-2) colorimetry format
+ * @DP_COLORIMETRY_SYCC_601: sYCC601 colorimetry format
+ * @DP_COLORIMETRY_RGB_CUSTOM: RGB Custom Color Profile colorimetry format
+ * @DP_COLORIMETRY_OPYCC_601: opYCC601 colorimetry format
+ * @DP_COLORIMETRY_BT2020_RGB: ITU-R BT.2020 R' G' B' colorimetry format
+ * @DP_COLORIMETRY_BT2020_CYCC: ITU-R BT.2020 Y'c C'bc C'rc colorimetry format
+ * @DP_COLORIMETRY_BT2020_YCC: ITU-R BT.2020 Y' C'b C'r colorimetry format
+ */
+enum dp_colorimetry {
+ DP_COLORIMETRY_DEFAULT = 0,
+ DP_COLORIMETRY_RGB_WIDE_FIXED = 0x1,
+ DP_COLORIMETRY_BT709_YCC = 0x1,
+ DP_COLORIMETRY_RGB_WIDE_FLOAT = 0x2,
+ DP_COLORIMETRY_XVYCC_601 = 0x2,
+ DP_COLORIMETRY_OPRGB = 0x3,
+ DP_COLORIMETRY_XVYCC_709 = 0x3,
+ DP_COLORIMETRY_DCI_P3_RGB = 0x4,
+ DP_COLORIMETRY_SYCC_601 = 0x4,
+ DP_COLORIMETRY_RGB_CUSTOM = 0x5,
+ DP_COLORIMETRY_OPYCC_601 = 0x5,
+ DP_COLORIMETRY_BT2020_RGB = 0x6,
+ DP_COLORIMETRY_BT2020_CYCC = 0x6,
+ DP_COLORIMETRY_BT2020_YCC = 0x7,
+};
+
+/**
+ * enum dp_dynamic_range - drm DP Dynamic Range
+ *
+ * This enum is used to indicate DP VSC SDP Dynamic Range.
+ * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through
+ * DB18]
+ *
+ * @DP_DYNAMIC_RANGE_VESA: VESA range
+ * @DP_DYNAMIC_RANGE_CTA: CTA range
+ */
+enum dp_dynamic_range {
+ DP_DYNAMIC_RANGE_VESA = 0,
+ DP_DYNAMIC_RANGE_CTA = 1,
+};
+
+/**
+ * enum dp_content_type - drm DP Content Type
+ *
+ * This enum is used to indicate DP VSC SDP Content Types.
+ * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through
+ * DB18]
+ * CTA-861-G defines content types and expected processing by a sink device
+ *
+ * @DP_CONTENT_TYPE_NOT_DEFINED: Not defined type
+ * @DP_CONTENT_TYPE_GRAPHICS: Graphics type
+ * @DP_CONTENT_TYPE_PHOTO: Photo type
+ * @DP_CONTENT_TYPE_VIDEO: Video type
+ * @DP_CONTENT_TYPE_GAME: Game type
+ */
+enum dp_content_type {
+ DP_CONTENT_TYPE_NOT_DEFINED = 0x00,
+ DP_CONTENT_TYPE_GRAPHICS = 0x01,
+ DP_CONTENT_TYPE_PHOTO = 0x02,
+ DP_CONTENT_TYPE_VIDEO = 0x03,
+ DP_CONTENT_TYPE_GAME = 0x04,
+};
+
+#endif /* _DRM_DP_H_ */
diff --git a/include/drm/display/drm_dp_aux_bus.h b/include/drm/display/drm_dp_aux_bus.h
new file mode 100644
index 000000000..8a0a48638
--- /dev/null
+++ b/include/drm/display/drm_dp_aux_bus.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2021 Google Inc.
+ *
+ * The DP AUX bus is used for devices that are connected over a DisplayPort
+ * AUX bus. The devices on the far side of the bus are referred to as
+ * endpoints in this code.
+ */
+
+#ifndef _DP_AUX_BUS_H_
+#define _DP_AUX_BUS_H_
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+/**
+ * struct dp_aux_ep_device - Main dev structure for DP AUX endpoints
+ *
+ * This is used to instantiate devices that are connected via a DP AUX
+ * bus. Usually the device is a panel, but conceivable other devices could
+ * be hooked up there.
+ */
+struct dp_aux_ep_device {
+ /** @dev: The normal dev pointer */
+ struct device dev;
+ /** @aux: Pointer to the aux bus */
+ struct drm_dp_aux *aux;
+};
+
+struct dp_aux_ep_driver {
+ int (*probe)(struct dp_aux_ep_device *aux_ep);
+ void (*remove)(struct dp_aux_ep_device *aux_ep);
+ void (*shutdown)(struct dp_aux_ep_device *aux_ep);
+ struct device_driver driver;
+};
+
+static inline struct dp_aux_ep_device *to_dp_aux_ep_dev(struct device *dev)
+{
+ return container_of(dev, struct dp_aux_ep_device, dev);
+}
+
+static inline struct dp_aux_ep_driver *to_dp_aux_ep_drv(struct device_driver *drv)
+{
+ return container_of(drv, struct dp_aux_ep_driver, driver);
+}
+
+int of_dp_aux_populate_bus(struct drm_dp_aux *aux,
+ int (*done_probing)(struct drm_dp_aux *aux));
+void of_dp_aux_depopulate_bus(struct drm_dp_aux *aux);
+int devm_of_dp_aux_populate_bus(struct drm_dp_aux *aux,
+ int (*done_probing)(struct drm_dp_aux *aux));
+
+/* Deprecated versions of the above functions. To be removed when no callers. */
+static inline int of_dp_aux_populate_ep_devices(struct drm_dp_aux *aux)
+{
+ int ret;
+
+ ret = of_dp_aux_populate_bus(aux, NULL);
+
+ /* New API returns -ENODEV for no child case; adapt to old assumption */
+ return (ret != -ENODEV) ? ret : 0;
+}
+
+static inline int devm_of_dp_aux_populate_ep_devices(struct drm_dp_aux *aux)
+{
+ int ret;
+
+ ret = devm_of_dp_aux_populate_bus(aux, NULL);
+
+ /* New API returns -ENODEV for no child case; adapt to old assumption */
+ return (ret != -ENODEV) ? ret : 0;
+}
+
+static inline void of_dp_aux_depopulate_ep_devices(struct drm_dp_aux *aux)
+{
+ of_dp_aux_depopulate_bus(aux);
+}
+
+#define dp_aux_dp_driver_register(aux_ep_drv) \
+ __dp_aux_dp_driver_register(aux_ep_drv, THIS_MODULE)
+int __dp_aux_dp_driver_register(struct dp_aux_ep_driver *aux_ep_drv,
+ struct module *owner);
+void dp_aux_dp_driver_unregister(struct dp_aux_ep_driver *aux_ep_drv);
+
+#endif /* _DP_AUX_BUS_H_ */
diff --git a/include/drm/display/drm_dp_dual_mode_helper.h b/include/drm/display/drm_dp_dual_mode_helper.h
new file mode 100644
index 000000000..7ee482265
--- /dev/null
+++ b/include/drm/display/drm_dp_dual_mode_helper.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef DRM_DP_DUAL_MODE_HELPER_H
+#define DRM_DP_DUAL_MODE_HELPER_H
+
+#include <linux/types.h>
+
+/*
+ * Optional for type 1 DVI adaptors
+ * Mandatory for type 1 HDMI and type 2 adaptors
+ */
+#define DP_DUAL_MODE_HDMI_ID 0x00 /* 00-0f */
+#define DP_DUAL_MODE_HDMI_ID_LEN 16
+/*
+ * Optional for type 1 adaptors
+ * Mandatory for type 2 adaptors
+ */
+#define DP_DUAL_MODE_ADAPTOR_ID 0x10
+#define DP_DUAL_MODE_REV_MASK 0x07
+#define DP_DUAL_MODE_REV_TYPE2 0x00
+#define DP_DUAL_MODE_TYPE_MASK 0xf0
+#define DP_DUAL_MODE_TYPE_TYPE2 0xa0
+/* This field is marked reserved in dual mode spec, used in LSPCON */
+#define DP_DUAL_MODE_TYPE_HAS_DPCD 0x08
+#define DP_DUAL_MODE_IEEE_OUI 0x11 /* 11-13*/
+#define DP_DUAL_IEEE_OUI_LEN 3
+#define DP_DUAL_DEVICE_ID 0x14 /* 14-19 */
+#define DP_DUAL_DEVICE_ID_LEN 6
+#define DP_DUAL_MODE_HARDWARE_REV 0x1a
+#define DP_DUAL_MODE_FIRMWARE_MAJOR_REV 0x1b
+#define DP_DUAL_MODE_FIRMWARE_MINOR_REV 0x1c
+#define DP_DUAL_MODE_MAX_TMDS_CLOCK 0x1d
+#define DP_DUAL_MODE_I2C_SPEED_CAP 0x1e
+#define DP_DUAL_MODE_TMDS_OEN 0x20
+#define DP_DUAL_MODE_TMDS_DISABLE 0x01
+#define DP_DUAL_MODE_HDMI_PIN_CTRL 0x21
+#define DP_DUAL_MODE_CEC_ENABLE 0x01
+#define DP_DUAL_MODE_I2C_SPEED_CTRL 0x22
+
+/* LSPCON specific registers, defined by MCA */
+#define DP_DUAL_MODE_LSPCON_MODE_CHANGE 0x40
+#define DP_DUAL_MODE_LSPCON_CURRENT_MODE 0x41
+#define DP_DUAL_MODE_LSPCON_MODE_PCON 0x1
+
+struct drm_device;
+struct i2c_adapter;
+
+ssize_t drm_dp_dual_mode_read(struct i2c_adapter *adapter,
+ u8 offset, void *buffer, size_t size);
+ssize_t drm_dp_dual_mode_write(struct i2c_adapter *adapter,
+ u8 offset, const void *buffer, size_t size);
+
+/**
+ * enum drm_lspcon_mode
+ * @DRM_LSPCON_MODE_INVALID: No LSPCON.
+ * @DRM_LSPCON_MODE_LS: Level shifter mode of LSPCON
+ * which drives DP++ to HDMI 1.4 conversion.
+ * @DRM_LSPCON_MODE_PCON: Protocol converter mode of LSPCON
+ * which drives DP++ to HDMI 2.0 active conversion.
+ */
+enum drm_lspcon_mode {
+ DRM_LSPCON_MODE_INVALID,
+ DRM_LSPCON_MODE_LS,
+ DRM_LSPCON_MODE_PCON,
+};
+
+/**
+ * enum drm_dp_dual_mode_type - Type of the DP dual mode adaptor
+ * @DRM_DP_DUAL_MODE_NONE: No DP dual mode adaptor
+ * @DRM_DP_DUAL_MODE_UNKNOWN: Could be either none or type 1 DVI adaptor
+ * @DRM_DP_DUAL_MODE_TYPE1_DVI: Type 1 DVI adaptor
+ * @DRM_DP_DUAL_MODE_TYPE1_HDMI: Type 1 HDMI adaptor
+ * @DRM_DP_DUAL_MODE_TYPE2_DVI: Type 2 DVI adaptor
+ * @DRM_DP_DUAL_MODE_TYPE2_HDMI: Type 2 HDMI adaptor
+ * @DRM_DP_DUAL_MODE_LSPCON: Level shifter / protocol converter
+ */
+enum drm_dp_dual_mode_type {
+ DRM_DP_DUAL_MODE_NONE,
+ DRM_DP_DUAL_MODE_UNKNOWN,
+ DRM_DP_DUAL_MODE_TYPE1_DVI,
+ DRM_DP_DUAL_MODE_TYPE1_HDMI,
+ DRM_DP_DUAL_MODE_TYPE2_DVI,
+ DRM_DP_DUAL_MODE_TYPE2_HDMI,
+ DRM_DP_DUAL_MODE_LSPCON,
+};
+
+enum drm_dp_dual_mode_type
+drm_dp_dual_mode_detect(const struct drm_device *dev, struct i2c_adapter *adapter);
+int drm_dp_dual_mode_max_tmds_clock(const struct drm_device *dev, enum drm_dp_dual_mode_type type,
+ struct i2c_adapter *adapter);
+int drm_dp_dual_mode_get_tmds_output(const struct drm_device *dev, enum drm_dp_dual_mode_type type,
+ struct i2c_adapter *adapter, bool *enabled);
+int drm_dp_dual_mode_set_tmds_output(const struct drm_device *dev, enum drm_dp_dual_mode_type type,
+ struct i2c_adapter *adapter, bool enable);
+const char *drm_dp_get_dual_mode_type_name(enum drm_dp_dual_mode_type type);
+
+int drm_lspcon_get_mode(const struct drm_device *dev, struct i2c_adapter *adapter,
+ enum drm_lspcon_mode *current_mode);
+int drm_lspcon_set_mode(const struct drm_device *dev, struct i2c_adapter *adapter,
+ enum drm_lspcon_mode reqd_mode);
+#endif
diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h
new file mode 100644
index 000000000..ade9df59e
--- /dev/null
+++ b/include/drm/display/drm_dp_helper.h
@@ -0,0 +1,765 @@
+/*
+ * Copyright © 2008 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. The copyright holders make no representations
+ * about the suitability of this software for any purpose. It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef _DRM_DP_HELPER_H_
+#define _DRM_DP_HELPER_H_
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+
+#include <drm/display/drm_dp.h>
+#include <drm/drm_connector.h>
+
+struct drm_device;
+struct drm_dp_aux;
+struct drm_panel;
+
+bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
+ int lane_count);
+bool drm_dp_clock_recovery_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
+ int lane_count);
+u8 drm_dp_get_adjust_request_voltage(const u8 link_status[DP_LINK_STATUS_SIZE],
+ int lane);
+u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SIZE],
+ int lane);
+u8 drm_dp_get_adjust_tx_ffe_preset(const u8 link_status[DP_LINK_STATUS_SIZE],
+ int lane);
+
+int drm_dp_read_clock_recovery_delay(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ enum drm_dp_phy dp_phy, bool uhbr);
+int drm_dp_read_channel_eq_delay(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ enum drm_dp_phy dp_phy, bool uhbr);
+
+void drm_dp_link_train_clock_recovery_delay(const struct drm_dp_aux *aux,
+ const u8 dpcd[DP_RECEIVER_CAP_SIZE]);
+void drm_dp_lttpr_link_train_clock_recovery_delay(void);
+void drm_dp_link_train_channel_eq_delay(const struct drm_dp_aux *aux,
+ const u8 dpcd[DP_RECEIVER_CAP_SIZE]);
+void drm_dp_lttpr_link_train_channel_eq_delay(const struct drm_dp_aux *aux,
+ const u8 caps[DP_LTTPR_PHY_CAP_SIZE]);
+
+int drm_dp_128b132b_read_aux_rd_interval(struct drm_dp_aux *aux);
+bool drm_dp_128b132b_lane_channel_eq_done(const u8 link_status[DP_LINK_STATUS_SIZE],
+ int lane_count);
+bool drm_dp_128b132b_lane_symbol_locked(const u8 link_status[DP_LINK_STATUS_SIZE],
+ int lane_count);
+bool drm_dp_128b132b_eq_interlane_align_done(const u8 link_status[DP_LINK_STATUS_SIZE]);
+bool drm_dp_128b132b_cds_interlane_align_done(const u8 link_status[DP_LINK_STATUS_SIZE]);
+bool drm_dp_128b132b_link_training_failed(const u8 link_status[DP_LINK_STATUS_SIZE]);
+
+u8 drm_dp_link_rate_to_bw_code(int link_rate);
+int drm_dp_bw_code_to_link_rate(u8 link_bw);
+
+const char *drm_dp_phy_name(enum drm_dp_phy dp_phy);
+
+/**
+ * struct drm_dp_vsc_sdp - drm DP VSC SDP
+ *
+ * This structure represents a DP VSC SDP of drm
+ * It is based on DP 1.4 spec [Table 2-116: VSC SDP Header Bytes] and
+ * [Table 2-117: VSC SDP Payload for DB16 through DB18]
+ *
+ * @sdp_type: secondary-data packet type
+ * @revision: revision number
+ * @length: number of valid data bytes
+ * @pixelformat: pixel encoding format
+ * @colorimetry: colorimetry format
+ * @bpc: bit per color
+ * @dynamic_range: dynamic range information
+ * @content_type: CTA-861-G defines content types and expected processing by a sink device
+ */
+struct drm_dp_vsc_sdp {
+ unsigned char sdp_type;
+ unsigned char revision;
+ unsigned char length;
+ enum dp_pixelformat pixelformat;
+ enum dp_colorimetry colorimetry;
+ int bpc;
+ enum dp_dynamic_range dynamic_range;
+ enum dp_content_type content_type;
+};
+
+void drm_dp_vsc_sdp_log(const char *level, struct device *dev,
+ const struct drm_dp_vsc_sdp *vsc);
+
+int drm_dp_psr_setup_time(const u8 psr_cap[EDP_PSR_RECEIVER_CAP_SIZE]);
+
+static inline int
+drm_dp_max_link_rate(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+ return drm_dp_bw_code_to_link_rate(dpcd[DP_MAX_LINK_RATE]);
+}
+
+static inline u8
+drm_dp_max_lane_count(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+ return dpcd[DP_MAX_LANE_COUNT] & DP_MAX_LANE_COUNT_MASK;
+}
+
+static inline bool
+drm_dp_enhanced_frame_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+ return dpcd[DP_DPCD_REV] >= 0x11 &&
+ (dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP);
+}
+
+static inline bool
+drm_dp_fast_training_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+ return dpcd[DP_DPCD_REV] >= 0x11 &&
+ (dpcd[DP_MAX_DOWNSPREAD] & DP_NO_AUX_HANDSHAKE_LINK_TRAINING);
+}
+
+static inline bool
+drm_dp_tps3_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+ return dpcd[DP_DPCD_REV] >= 0x12 &&
+ dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED;
+}
+
+static inline bool
+drm_dp_max_downspread(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+ return dpcd[DP_DPCD_REV] >= 0x11 ||
+ dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5;
+}
+
+static inline bool
+drm_dp_tps4_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+ return dpcd[DP_DPCD_REV] >= 0x14 &&
+ dpcd[DP_MAX_DOWNSPREAD] & DP_TPS4_SUPPORTED;
+}
+
+static inline u8
+drm_dp_training_pattern_mask(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+ return (dpcd[DP_DPCD_REV] >= 0x14) ? DP_TRAINING_PATTERN_MASK_1_4 :
+ DP_TRAINING_PATTERN_MASK;
+}
+
+static inline bool
+drm_dp_is_branch(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+ return dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT;
+}
+
+/* DP/eDP DSC support */
+u8 drm_dp_dsc_sink_max_slice_count(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE],
+ bool is_edp);
+u8 drm_dp_dsc_sink_line_buf_depth(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]);
+int drm_dp_dsc_sink_supported_input_bpcs(const u8 dsc_dpc[DP_DSC_RECEIVER_CAP_SIZE],
+ u8 dsc_bpc[3]);
+
+static inline bool
+drm_dp_sink_supports_dsc(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE])
+{
+ return dsc_dpcd[DP_DSC_SUPPORT - DP_DSC_SUPPORT] &
+ DP_DSC_DECOMPRESSION_IS_SUPPORTED;
+}
+
+static inline u16
+drm_edp_dsc_sink_output_bpp(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE])
+{
+ return dsc_dpcd[DP_DSC_MAX_BITS_PER_PIXEL_LOW - DP_DSC_SUPPORT] |
+ ((dsc_dpcd[DP_DSC_MAX_BITS_PER_PIXEL_HI - DP_DSC_SUPPORT] &
+ DP_DSC_MAX_BITS_PER_PIXEL_HI_MASK) << 8);
+}
+
+static inline u32
+drm_dp_dsc_sink_max_slice_width(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE])
+{
+ /* Max Slicewidth = Number of Pixels * 320 */
+ return dsc_dpcd[DP_DSC_MAX_SLICE_WIDTH - DP_DSC_SUPPORT] *
+ DP_DSC_SLICE_WIDTH_MULTIPLIER;
+}
+
+/* Forward Error Correction Support on DP 1.4 */
+static inline bool
+drm_dp_sink_supports_fec(const u8 fec_capable)
+{
+ return fec_capable & DP_FEC_CAPABLE;
+}
+
+static inline bool
+drm_dp_channel_coding_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+ return dpcd[DP_MAIN_LINK_CHANNEL_CODING] & DP_CAP_ANSI_8B10B;
+}
+
+static inline bool
+drm_dp_alternate_scrambler_reset_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+ return dpcd[DP_EDP_CONFIGURATION_CAP] &
+ DP_ALTERNATE_SCRAMBLER_RESET_CAP;
+}
+
+/* Ignore MSA timing for Adaptive Sync support on DP 1.4 */
+static inline bool
+drm_dp_sink_can_do_video_without_timing_msa(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+ return dpcd[DP_DOWN_STREAM_PORT_COUNT] &
+ DP_MSA_TIMING_PAR_IGNORED;
+}
+
+/**
+ * drm_edp_backlight_supported() - Check an eDP DPCD for VESA backlight support
+ * @edp_dpcd: The DPCD to check
+ *
+ * Note that currently this function will return %false for panels which support various DPCD
+ * backlight features but which require the brightness be set through PWM, and don't support setting
+ * the brightness level via the DPCD.
+ *
+ * Returns: %True if @edp_dpcd indicates that VESA backlight controls are supported, %false
+ * otherwise
+ */
+static inline bool
+drm_edp_backlight_supported(const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE])
+{
+ return !!(edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP);
+}
+
+/*
+ * DisplayPort AUX channel
+ */
+
+/**
+ * struct drm_dp_aux_msg - DisplayPort AUX channel transaction
+ * @address: address of the (first) register to access
+ * @request: contains the type of transaction (see DP_AUX_* macros)
+ * @reply: upon completion, contains the reply type of the transaction
+ * @buffer: pointer to a transmission or reception buffer
+ * @size: size of @buffer
+ */
+struct drm_dp_aux_msg {
+ unsigned int address;
+ u8 request;
+ u8 reply;
+ void *buffer;
+ size_t size;
+};
+
+struct cec_adapter;
+struct edid;
+struct drm_connector;
+
+/**
+ * struct drm_dp_aux_cec - DisplayPort CEC-Tunneling-over-AUX
+ * @lock: mutex protecting this struct
+ * @adap: the CEC adapter for CEC-Tunneling-over-AUX support.
+ * @connector: the connector this CEC adapter is associated with
+ * @unregister_work: unregister the CEC adapter
+ */
+struct drm_dp_aux_cec {
+ struct mutex lock;
+ struct cec_adapter *adap;
+ struct drm_connector *connector;
+ struct delayed_work unregister_work;
+};
+
+/**
+ * struct drm_dp_aux - DisplayPort AUX channel
+ *
+ * An AUX channel can also be used to transport I2C messages to a sink. A
+ * typical application of that is to access an EDID that's present in the sink
+ * device. The @transfer() function can also be used to execute such
+ * transactions. The drm_dp_aux_register() function registers an I2C adapter
+ * that can be passed to drm_probe_ddc(). Upon removal, drivers should call
+ * drm_dp_aux_unregister() to remove the I2C adapter. The I2C adapter uses long
+ * transfers by default; if a partial response is received, the adapter will
+ * drop down to the size given by the partial response for this transaction
+ * only.
+ */
+struct drm_dp_aux {
+ /**
+ * @name: user-visible name of this AUX channel and the
+ * I2C-over-AUX adapter.
+ *
+ * It's also used to specify the name of the I2C adapter. If set
+ * to %NULL, dev_name() of @dev will be used.
+ */
+ const char *name;
+
+ /**
+ * @ddc: I2C adapter that can be used for I2C-over-AUX
+ * communication
+ */
+ struct i2c_adapter ddc;
+
+ /**
+ * @dev: pointer to struct device that is the parent for this
+ * AUX channel.
+ */
+ struct device *dev;
+
+ /**
+ * @drm_dev: pointer to the &drm_device that owns this AUX channel.
+ * Beware, this may be %NULL before drm_dp_aux_register() has been
+ * called.
+ *
+ * It should be set to the &drm_device that will be using this AUX
+ * channel as early as possible. For many graphics drivers this should
+ * happen before drm_dp_aux_init(), however it's perfectly fine to set
+ * this field later so long as it's assigned before calling
+ * drm_dp_aux_register().
+ */
+ struct drm_device *drm_dev;
+
+ /**
+ * @crtc: backpointer to the crtc that is currently using this
+ * AUX channel
+ */
+ struct drm_crtc *crtc;
+
+ /**
+ * @hw_mutex: internal mutex used for locking transfers.
+ *
+ * Note that if the underlying hardware is shared among multiple
+ * channels, the driver needs to do additional locking to
+ * prevent concurrent access.
+ */
+ struct mutex hw_mutex;
+
+ /**
+ * @crc_work: worker that captures CRCs for each frame
+ */
+ struct work_struct crc_work;
+
+ /**
+ * @crc_count: counter of captured frame CRCs
+ */
+ u8 crc_count;
+
+ /**
+ * @transfer: transfers a message representing a single AUX
+ * transaction.
+ *
+ * This is a hardware-specific implementation of how
+ * transactions are executed that the drivers must provide.
+ *
+ * A pointer to a &drm_dp_aux_msg structure describing the
+ * transaction is passed into this function. Upon success, the
+ * implementation should return the number of payload bytes that
+ * were transferred, or a negative error-code on failure.
+ *
+ * Helpers will propagate these errors, with the exception of
+ * the %-EBUSY error, which causes a transaction to be retried.
+ * On a short, helpers will return %-EPROTO to make it simpler
+ * to check for failure.
+ *
+ * The @transfer() function must only modify the reply field of
+ * the &drm_dp_aux_msg structure. The retry logic and i2c
+ * helpers assume this is the case.
+ *
+ * Also note that this callback can be called no matter the
+ * state @dev is in and also no matter what state the panel is
+ * in. It's expected:
+ *
+ * - If the @dev providing the AUX bus is currently unpowered then
+ * it will power itself up for the transfer.
+ *
+ * - If we're on eDP (using a drm_panel) and the panel is not in a
+ * state where it can respond (it's not powered or it's in a
+ * low power state) then this function may return an error, but
+ * not crash. It's up to the caller of this code to make sure that
+ * the panel is powered on if getting an error back is not OK. If a
+ * drm_panel driver is initiating a DP AUX transfer it may power
+ * itself up however it wants. All other code should ensure that
+ * the pre_enable() bridge chain (which eventually calls the
+ * drm_panel prepare function) has powered the panel.
+ */
+ ssize_t (*transfer)(struct drm_dp_aux *aux,
+ struct drm_dp_aux_msg *msg);
+
+ /**
+ * @wait_hpd_asserted: wait for HPD to be asserted
+ *
+ * This is mainly useful for eDP panels drivers to wait for an eDP
+ * panel to finish powering on. This is an optional function.
+ *
+ * This function will efficiently wait for the HPD signal to be
+ * asserted. The `wait_us` parameter that is passed in says that we
+ * know that the HPD signal is expected to be asserted within `wait_us`
+ * microseconds. This function could wait for longer than `wait_us` if
+ * the logic in the DP controller has a long debouncing time. The
+ * important thing is that if this function returns success that the
+ * DP controller is ready to send AUX transactions.
+ *
+ * This function returns 0 if HPD was asserted or -ETIMEDOUT if time
+ * expired and HPD wasn't asserted. This function should not print
+ * timeout errors to the log.
+ *
+ * The semantics of this function are designed to match the
+ * readx_poll_timeout() function. That means a `wait_us` of 0 means
+ * to wait forever. Like readx_poll_timeout(), this function may sleep.
+ *
+ * NOTE: this function specifically reports the state of the HPD pin
+ * that's associated with the DP AUX channel. This is different from
+ * the HPD concept in much of the rest of DRM which is more about
+ * physical presence of a display. For eDP, for instance, a display is
+ * assumed always present even if the HPD pin is deasserted.
+ */
+ int (*wait_hpd_asserted)(struct drm_dp_aux *aux, unsigned long wait_us);
+
+ /**
+ * @i2c_nack_count: Counts I2C NACKs, used for DP validation.
+ */
+ unsigned i2c_nack_count;
+ /**
+ * @i2c_defer_count: Counts I2C DEFERs, used for DP validation.
+ */
+ unsigned i2c_defer_count;
+ /**
+ * @cec: struct containing fields used for CEC-Tunneling-over-AUX.
+ */
+ struct drm_dp_aux_cec cec;
+ /**
+ * @is_remote: Is this AUX CH actually using sideband messaging.
+ */
+ bool is_remote;
+};
+
+int drm_dp_dpcd_probe(struct drm_dp_aux *aux, unsigned int offset);
+ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset,
+ void *buffer, size_t size);
+ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset,
+ void *buffer, size_t size);
+
+/**
+ * drm_dp_dpcd_readb() - read a single byte from the DPCD
+ * @aux: DisplayPort AUX channel
+ * @offset: address of the register to read
+ * @valuep: location where the value of the register will be stored
+ *
+ * Returns the number of bytes transferred (1) on success, or a negative
+ * error code on failure.
+ */
+static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux,
+ unsigned int offset, u8 *valuep)
+{
+ return drm_dp_dpcd_read(aux, offset, valuep, 1);
+}
+
+/**
+ * drm_dp_dpcd_writeb() - write a single byte to the DPCD
+ * @aux: DisplayPort AUX channel
+ * @offset: address of the register to write
+ * @value: value to write to the register
+ *
+ * Returns the number of bytes transferred (1) on success, or a negative
+ * error code on failure.
+ */
+static inline ssize_t drm_dp_dpcd_writeb(struct drm_dp_aux *aux,
+ unsigned int offset, u8 value)
+{
+ return drm_dp_dpcd_write(aux, offset, &value, 1);
+}
+
+int drm_dp_read_dpcd_caps(struct drm_dp_aux *aux,
+ u8 dpcd[DP_RECEIVER_CAP_SIZE]);
+
+int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux,
+ u8 status[DP_LINK_STATUS_SIZE]);
+
+int drm_dp_dpcd_read_phy_link_status(struct drm_dp_aux *aux,
+ enum drm_dp_phy dp_phy,
+ u8 link_status[DP_LINK_STATUS_SIZE]);
+
+bool drm_dp_send_real_edid_checksum(struct drm_dp_aux *aux,
+ u8 real_edid_checksum);
+
+int drm_dp_read_downstream_info(struct drm_dp_aux *aux,
+ const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ u8 downstream_ports[DP_MAX_DOWNSTREAM_PORTS]);
+bool drm_dp_downstream_is_type(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ const u8 port_cap[4], u8 type);
+bool drm_dp_downstream_is_tmds(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ const u8 port_cap[4],
+ const struct edid *edid);
+int drm_dp_downstream_max_dotclock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ const u8 port_cap[4]);
+int drm_dp_downstream_max_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ const u8 port_cap[4],
+ const struct edid *edid);
+int drm_dp_downstream_min_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ const u8 port_cap[4],
+ const struct edid *edid);
+int drm_dp_downstream_max_bpc(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ const u8 port_cap[4],
+ const struct edid *edid);
+bool drm_dp_downstream_420_passthrough(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ const u8 port_cap[4]);
+bool drm_dp_downstream_444_to_420_conversion(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ const u8 port_cap[4]);
+struct drm_display_mode *drm_dp_downstream_mode(struct drm_device *dev,
+ const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ const u8 port_cap[4]);
+int drm_dp_downstream_id(struct drm_dp_aux *aux, char id[6]);
+void drm_dp_downstream_debug(struct seq_file *m,
+ const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ const u8 port_cap[4],
+ const struct edid *edid,
+ struct drm_dp_aux *aux);
+enum drm_mode_subconnector
+drm_dp_subconnector_type(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ const u8 port_cap[4]);
+void drm_dp_set_subconnector_property(struct drm_connector *connector,
+ enum drm_connector_status status,
+ const u8 *dpcd,
+ const u8 port_cap[4]);
+
+struct drm_dp_desc;
+bool drm_dp_read_sink_count_cap(struct drm_connector *connector,
+ const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ const struct drm_dp_desc *desc);
+int drm_dp_read_sink_count(struct drm_dp_aux *aux);
+
+int drm_dp_read_lttpr_common_caps(struct drm_dp_aux *aux,
+ const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ u8 caps[DP_LTTPR_COMMON_CAP_SIZE]);
+int drm_dp_read_lttpr_phy_caps(struct drm_dp_aux *aux,
+ const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ enum drm_dp_phy dp_phy,
+ u8 caps[DP_LTTPR_PHY_CAP_SIZE]);
+int drm_dp_lttpr_count(const u8 cap[DP_LTTPR_COMMON_CAP_SIZE]);
+int drm_dp_lttpr_max_link_rate(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]);
+int drm_dp_lttpr_max_lane_count(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]);
+bool drm_dp_lttpr_voltage_swing_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]);
+bool drm_dp_lttpr_pre_emphasis_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]);
+
+void drm_dp_remote_aux_init(struct drm_dp_aux *aux);
+void drm_dp_aux_init(struct drm_dp_aux *aux);
+int drm_dp_aux_register(struct drm_dp_aux *aux);
+void drm_dp_aux_unregister(struct drm_dp_aux *aux);
+
+int drm_dp_start_crc(struct drm_dp_aux *aux, struct drm_crtc *crtc);
+int drm_dp_stop_crc(struct drm_dp_aux *aux);
+
+struct drm_dp_dpcd_ident {
+ u8 oui[3];
+ u8 device_id[6];
+ u8 hw_rev;
+ u8 sw_major_rev;
+ u8 sw_minor_rev;
+} __packed;
+
+/**
+ * struct drm_dp_desc - DP branch/sink device descriptor
+ * @ident: DP device identification from DPCD 0x400 (sink) or 0x500 (branch).
+ * @quirks: Quirks; use drm_dp_has_quirk() to query for the quirks.
+ */
+struct drm_dp_desc {
+ struct drm_dp_dpcd_ident ident;
+ u32 quirks;
+};
+
+int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc,
+ bool is_branch);
+
+/**
+ * enum drm_dp_quirk - Display Port sink/branch device specific quirks
+ *
+ * Display Port sink and branch devices in the wild have a variety of bugs, try
+ * to collect them here. The quirks are shared, but it's up to the drivers to
+ * implement workarounds for them.
+ */
+enum drm_dp_quirk {
+ /**
+ * @DP_DPCD_QUIRK_CONSTANT_N:
+ *
+ * The device requires main link attributes Mvid and Nvid to be limited
+ * to 16 bits. So will give a constant value (0x8000) for compatability.
+ */
+ DP_DPCD_QUIRK_CONSTANT_N,
+ /**
+ * @DP_DPCD_QUIRK_NO_PSR:
+ *
+ * The device does not support PSR even if reports that it supports or
+ * driver still need to implement proper handling for such device.
+ */
+ DP_DPCD_QUIRK_NO_PSR,
+ /**
+ * @DP_DPCD_QUIRK_NO_SINK_COUNT:
+ *
+ * The device does not set SINK_COUNT to a non-zero value.
+ * The driver should ignore SINK_COUNT during detection. Note that
+ * drm_dp_read_sink_count_cap() automatically checks for this quirk.
+ */
+ DP_DPCD_QUIRK_NO_SINK_COUNT,
+ /**
+ * @DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD:
+ *
+ * The device supports MST DSC despite not supporting Virtual DPCD.
+ * The DSC caps can be read from the physical aux instead.
+ */
+ DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD,
+ /**
+ * @DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS:
+ *
+ * The device supports a link rate of 3.24 Gbps (multiplier 0xc) despite
+ * the DP_MAX_LINK_RATE register reporting a lower max multiplier.
+ */
+ DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS,
+};
+
+/**
+ * drm_dp_has_quirk() - does the DP device have a specific quirk
+ * @desc: Device descriptor filled by drm_dp_read_desc()
+ * @quirk: Quirk to query for
+ *
+ * Return true if DP device identified by @desc has @quirk.
+ */
+static inline bool
+drm_dp_has_quirk(const struct drm_dp_desc *desc, enum drm_dp_quirk quirk)
+{
+ return desc->quirks & BIT(quirk);
+}
+
+/**
+ * struct drm_edp_backlight_info - Probed eDP backlight info struct
+ * @pwmgen_bit_count: The pwmgen bit count
+ * @pwm_freq_pre_divider: The PWM frequency pre-divider value being used for this backlight, if any
+ * @max: The maximum backlight level that may be set
+ * @lsb_reg_used: Do we also write values to the DP_EDP_BACKLIGHT_BRIGHTNESS_LSB register?
+ * @aux_enable: Does the panel support the AUX enable cap?
+ * @aux_set: Does the panel support setting the brightness through AUX?
+ *
+ * This structure contains various data about an eDP backlight, which can be populated by using
+ * drm_edp_backlight_init().
+ */
+struct drm_edp_backlight_info {
+ u8 pwmgen_bit_count;
+ u8 pwm_freq_pre_divider;
+ u16 max;
+
+ bool lsb_reg_used : 1;
+ bool aux_enable : 1;
+ bool aux_set : 1;
+};
+
+int
+drm_edp_backlight_init(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl,
+ u16 driver_pwm_freq_hz, const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE],
+ u16 *current_level, u8 *current_mode);
+int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl,
+ u16 level);
+int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl,
+ u16 level);
+int drm_edp_backlight_disable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl);
+
+#if IS_ENABLED(CONFIG_DRM_KMS_HELPER) && (IS_BUILTIN(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
+ (IS_MODULE(CONFIG_DRM_KMS_HELPER) && IS_MODULE(CONFIG_BACKLIGHT_CLASS_DEVICE)))
+
+int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux);
+
+#else
+
+static inline int drm_panel_dp_aux_backlight(struct drm_panel *panel,
+ struct drm_dp_aux *aux)
+{
+ return 0;
+}
+
+#endif
+
+#ifdef CONFIG_DRM_DP_CEC
+void drm_dp_cec_irq(struct drm_dp_aux *aux);
+void drm_dp_cec_register_connector(struct drm_dp_aux *aux,
+ struct drm_connector *connector);
+void drm_dp_cec_unregister_connector(struct drm_dp_aux *aux);
+void drm_dp_cec_set_edid(struct drm_dp_aux *aux, const struct edid *edid);
+void drm_dp_cec_unset_edid(struct drm_dp_aux *aux);
+#else
+static inline void drm_dp_cec_irq(struct drm_dp_aux *aux)
+{
+}
+
+static inline void
+drm_dp_cec_register_connector(struct drm_dp_aux *aux,
+ struct drm_connector *connector)
+{
+}
+
+static inline void drm_dp_cec_unregister_connector(struct drm_dp_aux *aux)
+{
+}
+
+static inline void drm_dp_cec_set_edid(struct drm_dp_aux *aux,
+ const struct edid *edid)
+{
+}
+
+static inline void drm_dp_cec_unset_edid(struct drm_dp_aux *aux)
+{
+}
+
+#endif
+
+/**
+ * struct drm_dp_phy_test_params - DP Phy Compliance parameters
+ * @link_rate: Requested Link rate from DPCD 0x219
+ * @num_lanes: Number of lanes requested by sing through DPCD 0x220
+ * @phy_pattern: DP Phy test pattern from DPCD 0x248
+ * @hbr2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD 0x24A and 0x24B
+ * @custom80: DP Test_80BIT_CUSTOM_PATTERN from DPCDs 0x250 through 0x259
+ * @enhanced_frame_cap: flag for enhanced frame capability.
+ */
+struct drm_dp_phy_test_params {
+ int link_rate;
+ u8 num_lanes;
+ u8 phy_pattern;
+ u8 hbr2_reset[2];
+ u8 custom80[10];
+ bool enhanced_frame_cap;
+};
+
+int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
+ struct drm_dp_phy_test_params *data);
+int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
+ struct drm_dp_phy_test_params *data, u8 dp_rev);
+int drm_dp_get_pcon_max_frl_bw(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ const u8 port_cap[4]);
+int drm_dp_pcon_frl_prepare(struct drm_dp_aux *aux, bool enable_frl_ready_hpd);
+bool drm_dp_pcon_is_frl_ready(struct drm_dp_aux *aux);
+int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps,
+ u8 frl_mode);
+int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask,
+ u8 frl_type);
+int drm_dp_pcon_reset_frl_config(struct drm_dp_aux *aux);
+int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux);
+
+bool drm_dp_pcon_hdmi_link_active(struct drm_dp_aux *aux);
+int drm_dp_pcon_hdmi_link_mode(struct drm_dp_aux *aux, u8 *frl_trained_mask);
+void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux,
+ struct drm_connector *connector);
+bool drm_dp_pcon_enc_is_dsc_1_2(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]);
+int drm_dp_pcon_dsc_max_slices(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]);
+int drm_dp_pcon_dsc_max_slice_width(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]);
+int drm_dp_pcon_dsc_bpp_incr(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]);
+int drm_dp_pcon_pps_default(struct drm_dp_aux *aux);
+int drm_dp_pcon_pps_override_buf(struct drm_dp_aux *aux, u8 pps_buf[128]);
+int drm_dp_pcon_pps_override_param(struct drm_dp_aux *aux, u8 pps_param[6]);
+bool drm_dp_downstream_rgb_to_ycbcr_conversion(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+ const u8 port_cap[4], u8 color_spc);
+int drm_dp_pcon_convert_rgb_to_ycbcr(struct drm_dp_aux *aux, u8 color_spc);
+
+#endif /* _DRM_DP_HELPER_H_ */
diff --git a/include/drm/display/drm_dp_mst_helper.h b/include/drm/display/drm_dp_mst_helper.h
new file mode 100644
index 000000000..40e855c84
--- /dev/null
+++ b/include/drm/display/drm_dp_mst_helper.h
@@ -0,0 +1,1014 @@
+/*
+ * Copyright © 2014 Red Hat.
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. The copyright holders make no representations
+ * about the suitability of this software for any purpose. It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+#ifndef _DRM_DP_MST_HELPER_H_
+#define _DRM_DP_MST_HELPER_H_
+
+#include <linux/types.h>
+#include <drm/display/drm_dp_helper.h>
+#include <drm/drm_atomic.h>
+
+#if IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS)
+#include <linux/stackdepot.h>
+#include <linux/timekeeping.h>
+
+enum drm_dp_mst_topology_ref_type {
+ DRM_DP_MST_TOPOLOGY_REF_GET,
+ DRM_DP_MST_TOPOLOGY_REF_PUT,
+};
+
+struct drm_dp_mst_topology_ref_history {
+ struct drm_dp_mst_topology_ref_entry {
+ enum drm_dp_mst_topology_ref_type type;
+ int count;
+ ktime_t ts_nsec;
+ depot_stack_handle_t backtrace;
+ } *entries;
+ int len;
+};
+#endif /* IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS) */
+
+struct drm_dp_mst_branch;
+
+/**
+ * struct drm_dp_mst_port - MST port
+ * @port_num: port number
+ * @input: if this port is an input port. Protected by
+ * &drm_dp_mst_topology_mgr.base.lock.
+ * @mcs: message capability status - DP 1.2 spec. Protected by
+ * &drm_dp_mst_topology_mgr.base.lock.
+ * @ddps: DisplayPort Device Plug Status - DP 1.2. Protected by
+ * &drm_dp_mst_topology_mgr.base.lock.
+ * @pdt: Peer Device Type. Protected by
+ * &drm_dp_mst_topology_mgr.base.lock.
+ * @ldps: Legacy Device Plug Status. Protected by
+ * &drm_dp_mst_topology_mgr.base.lock.
+ * @dpcd_rev: DPCD revision of device on this port. Protected by
+ * &drm_dp_mst_topology_mgr.base.lock.
+ * @num_sdp_streams: Number of simultaneous streams. Protected by
+ * &drm_dp_mst_topology_mgr.base.lock.
+ * @num_sdp_stream_sinks: Number of stream sinks. Protected by
+ * &drm_dp_mst_topology_mgr.base.lock.
+ * @full_pbn: Max possible bandwidth for this port. Protected by
+ * &drm_dp_mst_topology_mgr.base.lock.
+ * @next: link to next port on this branch device
+ * @aux: i2c aux transport to talk to device connected to this port, protected
+ * by &drm_dp_mst_topology_mgr.base.lock.
+ * @passthrough_aux: parent aux to which DSC pass-through requests should be
+ * sent, only set if DSC pass-through is possible.
+ * @parent: branch device parent of this port
+ * @vcpi: Virtual Channel Payload info for this port.
+ * @connector: DRM connector this port is connected to. Protected by
+ * &drm_dp_mst_topology_mgr.base.lock.
+ * @mgr: topology manager this port lives under.
+ *
+ * This structure represents an MST port endpoint on a device somewhere
+ * in the MST topology.
+ */
+struct drm_dp_mst_port {
+ /**
+ * @topology_kref: refcount for this port's lifetime in the topology,
+ * only the DP MST helpers should need to touch this
+ */
+ struct kref topology_kref;
+
+ /**
+ * @malloc_kref: refcount for the memory allocation containing this
+ * structure. See drm_dp_mst_get_port_malloc() and
+ * drm_dp_mst_put_port_malloc().
+ */
+ struct kref malloc_kref;
+
+#if IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS)
+ /**
+ * @topology_ref_history: A history of each topology
+ * reference/dereference. See CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS.
+ */
+ struct drm_dp_mst_topology_ref_history topology_ref_history;
+#endif
+
+ u8 port_num;
+ bool input;
+ bool mcs;
+ bool ddps;
+ u8 pdt;
+ bool ldps;
+ u8 dpcd_rev;
+ u8 num_sdp_streams;
+ u8 num_sdp_stream_sinks;
+ uint16_t full_pbn;
+ struct list_head next;
+ /**
+ * @mstb: the branch device connected to this port, if there is one.
+ * This should be considered protected for reading by
+ * &drm_dp_mst_topology_mgr.lock. There are two exceptions to this:
+ * &drm_dp_mst_topology_mgr.up_req_work and
+ * &drm_dp_mst_topology_mgr.work, which do not grab
+ * &drm_dp_mst_topology_mgr.lock during reads but are the only
+ * updaters of this list and are protected from writing concurrently
+ * by &drm_dp_mst_topology_mgr.probe_lock.
+ */
+ struct drm_dp_mst_branch *mstb;
+ struct drm_dp_aux aux; /* i2c bus for this port? */
+ struct drm_dp_aux *passthrough_aux;
+ struct drm_dp_mst_branch *parent;
+
+ struct drm_connector *connector;
+ struct drm_dp_mst_topology_mgr *mgr;
+
+ /**
+ * @cached_edid: for DP logical ports - make tiling work by ensuring
+ * that the EDID for all connectors is read immediately.
+ */
+ struct edid *cached_edid;
+ /**
+ * @has_audio: Tracks whether the sink connector to this port is
+ * audio-capable.
+ */
+ bool has_audio;
+
+ /**
+ * @fec_capable: bool indicating if FEC can be supported up to that
+ * point in the MST topology.
+ */
+ bool fec_capable;
+};
+
+/* sideband msg header - not bit struct */
+struct drm_dp_sideband_msg_hdr {
+ u8 lct;
+ u8 lcr;
+ u8 rad[8];
+ bool broadcast;
+ bool path_msg;
+ u8 msg_len;
+ bool somt;
+ bool eomt;
+ bool seqno;
+};
+
+struct drm_dp_sideband_msg_rx {
+ u8 chunk[48];
+ u8 msg[256];
+ u8 curchunk_len;
+ u8 curchunk_idx; /* chunk we are parsing now */
+ u8 curchunk_hdrlen;
+ u8 curlen; /* total length of the msg */
+ bool have_somt;
+ bool have_eomt;
+ struct drm_dp_sideband_msg_hdr initial_hdr;
+};
+
+/**
+ * struct drm_dp_mst_branch - MST branch device.
+ * @rad: Relative Address to talk to this branch device.
+ * @lct: Link count total to talk to this branch device.
+ * @num_ports: number of ports on the branch.
+ * @port_parent: pointer to the port parent, NULL if toplevel.
+ * @mgr: topology manager for this branch device.
+ * @link_address_sent: if a link address message has been sent to this device yet.
+ * @guid: guid for DP 1.2 branch device. port under this branch can be
+ * identified by port #.
+ *
+ * This structure represents an MST branch device, there is one
+ * primary branch device at the root, along with any other branches connected
+ * to downstream port of parent branches.
+ */
+struct drm_dp_mst_branch {
+ /**
+ * @topology_kref: refcount for this branch device's lifetime in the
+ * topology, only the DP MST helpers should need to touch this
+ */
+ struct kref topology_kref;
+
+ /**
+ * @malloc_kref: refcount for the memory allocation containing this
+ * structure. See drm_dp_mst_get_mstb_malloc() and
+ * drm_dp_mst_put_mstb_malloc().
+ */
+ struct kref malloc_kref;
+
+#if IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS)
+ /**
+ * @topology_ref_history: A history of each topology
+ * reference/dereference. See CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS.
+ */
+ struct drm_dp_mst_topology_ref_history topology_ref_history;
+#endif
+
+ /**
+ * @destroy_next: linked-list entry used by
+ * drm_dp_delayed_destroy_work()
+ */
+ struct list_head destroy_next;
+
+ u8 rad[8];
+ u8 lct;
+ int num_ports;
+
+ /**
+ * @ports: the list of ports on this branch device. This should be
+ * considered protected for reading by &drm_dp_mst_topology_mgr.lock.
+ * There are two exceptions to this:
+ * &drm_dp_mst_topology_mgr.up_req_work and
+ * &drm_dp_mst_topology_mgr.work, which do not grab
+ * &drm_dp_mst_topology_mgr.lock during reads but are the only
+ * updaters of this list and are protected from updating the list
+ * concurrently by @drm_dp_mst_topology_mgr.probe_lock
+ */
+ struct list_head ports;
+
+ struct drm_dp_mst_port *port_parent;
+ struct drm_dp_mst_topology_mgr *mgr;
+
+ bool link_address_sent;
+
+ /* global unique identifier to identify branch devices */
+ u8 guid[16];
+};
+
+
+struct drm_dp_nak_reply {
+ u8 guid[16];
+ u8 reason;
+ u8 nak_data;
+};
+
+struct drm_dp_link_address_ack_reply {
+ u8 guid[16];
+ u8 nports;
+ struct drm_dp_link_addr_reply_port {
+ bool input_port;
+ u8 peer_device_type;
+ u8 port_number;
+ bool mcs;
+ bool ddps;
+ bool legacy_device_plug_status;
+ u8 dpcd_revision;
+ u8 peer_guid[16];
+ u8 num_sdp_streams;
+ u8 num_sdp_stream_sinks;
+ } ports[16];
+};
+
+struct drm_dp_remote_dpcd_read_ack_reply {
+ u8 port_number;
+ u8 num_bytes;
+ u8 bytes[255];
+};
+
+struct drm_dp_remote_dpcd_write_ack_reply {
+ u8 port_number;
+};
+
+struct drm_dp_remote_dpcd_write_nak_reply {
+ u8 port_number;
+ u8 reason;
+ u8 bytes_written_before_failure;
+};
+
+struct drm_dp_remote_i2c_read_ack_reply {
+ u8 port_number;
+ u8 num_bytes;
+ u8 bytes[255];
+};
+
+struct drm_dp_remote_i2c_read_nak_reply {
+ u8 port_number;
+ u8 nak_reason;
+ u8 i2c_nak_transaction;
+};
+
+struct drm_dp_remote_i2c_write_ack_reply {
+ u8 port_number;
+};
+
+struct drm_dp_query_stream_enc_status_ack_reply {
+ /* Bit[23:16]- Stream Id */
+ u8 stream_id;
+
+ /* Bit[15]- Signed */
+ bool reply_signed;
+
+ /* Bit[10:8]- Stream Output Sink Type */
+ bool unauthorizable_device_present;
+ bool legacy_device_present;
+ bool query_capable_device_present;
+
+ /* Bit[12:11]- Stream Output CP Type */
+ bool hdcp_1x_device_present;
+ bool hdcp_2x_device_present;
+
+ /* Bit[4]- Stream Authentication */
+ bool auth_completed;
+
+ /* Bit[3]- Stream Encryption */
+ bool encryption_enabled;
+
+ /* Bit[2]- Stream Repeater Function Present */
+ bool repeater_present;
+
+ /* Bit[1:0]- Stream State */
+ u8 state;
+};
+
+#define DRM_DP_MAX_SDP_STREAMS 16
+struct drm_dp_allocate_payload {
+ u8 port_number;
+ u8 number_sdp_streams;
+ u8 vcpi;
+ u16 pbn;
+ u8 sdp_stream_sink[DRM_DP_MAX_SDP_STREAMS];
+};
+
+struct drm_dp_allocate_payload_ack_reply {
+ u8 port_number;
+ u8 vcpi;
+ u16 allocated_pbn;
+};
+
+struct drm_dp_connection_status_notify {
+ u8 guid[16];
+ u8 port_number;
+ bool legacy_device_plug_status;
+ bool displayport_device_plug_status;
+ bool message_capability_status;
+ bool input_port;
+ u8 peer_device_type;
+};
+
+struct drm_dp_remote_dpcd_read {
+ u8 port_number;
+ u32 dpcd_address;
+ u8 num_bytes;
+};
+
+struct drm_dp_remote_dpcd_write {
+ u8 port_number;
+ u32 dpcd_address;
+ u8 num_bytes;
+ u8 *bytes;
+};
+
+#define DP_REMOTE_I2C_READ_MAX_TRANSACTIONS 4
+struct drm_dp_remote_i2c_read {
+ u8 num_transactions;
+ u8 port_number;
+ struct drm_dp_remote_i2c_read_tx {
+ u8 i2c_dev_id;
+ u8 num_bytes;
+ u8 *bytes;
+ u8 no_stop_bit;
+ u8 i2c_transaction_delay;
+ } transactions[DP_REMOTE_I2C_READ_MAX_TRANSACTIONS];
+ u8 read_i2c_device_id;
+ u8 num_bytes_read;
+};
+
+struct drm_dp_remote_i2c_write {
+ u8 port_number;
+ u8 write_i2c_device_id;
+ u8 num_bytes;
+ u8 *bytes;
+};
+
+struct drm_dp_query_stream_enc_status {
+ u8 stream_id;
+ u8 client_id[7]; /* 56-bit nonce */
+ u8 stream_event;
+ bool valid_stream_event;
+ u8 stream_behavior;
+ u8 valid_stream_behavior;
+};
+
+/* this covers ENUM_RESOURCES, POWER_DOWN_PHY, POWER_UP_PHY */
+struct drm_dp_port_number_req {
+ u8 port_number;
+};
+
+struct drm_dp_enum_path_resources_ack_reply {
+ u8 port_number;
+ bool fec_capable;
+ u16 full_payload_bw_number;
+ u16 avail_payload_bw_number;
+};
+
+/* covers POWER_DOWN_PHY, POWER_UP_PHY */
+struct drm_dp_port_number_rep {
+ u8 port_number;
+};
+
+struct drm_dp_query_payload {
+ u8 port_number;
+ u8 vcpi;
+};
+
+struct drm_dp_resource_status_notify {
+ u8 port_number;
+ u8 guid[16];
+ u16 available_pbn;
+};
+
+struct drm_dp_query_payload_ack_reply {
+ u8 port_number;
+ u16 allocated_pbn;
+};
+
+struct drm_dp_sideband_msg_req_body {
+ u8 req_type;
+ union ack_req {
+ struct drm_dp_connection_status_notify conn_stat;
+ struct drm_dp_port_number_req port_num;
+ struct drm_dp_resource_status_notify resource_stat;
+
+ struct drm_dp_query_payload query_payload;
+ struct drm_dp_allocate_payload allocate_payload;
+
+ struct drm_dp_remote_dpcd_read dpcd_read;
+ struct drm_dp_remote_dpcd_write dpcd_write;
+
+ struct drm_dp_remote_i2c_read i2c_read;
+ struct drm_dp_remote_i2c_write i2c_write;
+
+ struct drm_dp_query_stream_enc_status enc_status;
+ } u;
+};
+
+struct drm_dp_sideband_msg_reply_body {
+ u8 reply_type;
+ u8 req_type;
+ union ack_replies {
+ struct drm_dp_nak_reply nak;
+ struct drm_dp_link_address_ack_reply link_addr;
+ struct drm_dp_port_number_rep port_number;
+
+ struct drm_dp_enum_path_resources_ack_reply path_resources;
+ struct drm_dp_allocate_payload_ack_reply allocate_payload;
+ struct drm_dp_query_payload_ack_reply query_payload;
+
+ struct drm_dp_remote_dpcd_read_ack_reply remote_dpcd_read_ack;
+ struct drm_dp_remote_dpcd_write_ack_reply remote_dpcd_write_ack;
+ struct drm_dp_remote_dpcd_write_nak_reply remote_dpcd_write_nack;
+
+ struct drm_dp_remote_i2c_read_ack_reply remote_i2c_read_ack;
+ struct drm_dp_remote_i2c_read_nak_reply remote_i2c_read_nack;
+ struct drm_dp_remote_i2c_write_ack_reply remote_i2c_write_ack;
+
+ struct drm_dp_query_stream_enc_status_ack_reply enc_status;
+ } u;
+};
+
+/* msg is queued to be put into a slot */
+#define DRM_DP_SIDEBAND_TX_QUEUED 0
+/* msg has started transmitting on a slot - still on msgq */
+#define DRM_DP_SIDEBAND_TX_START_SEND 1
+/* msg has finished transmitting on a slot - removed from msgq only in slot */
+#define DRM_DP_SIDEBAND_TX_SENT 2
+/* msg has received a response - removed from slot */
+#define DRM_DP_SIDEBAND_TX_RX 3
+#define DRM_DP_SIDEBAND_TX_TIMEOUT 4
+
+struct drm_dp_sideband_msg_tx {
+ u8 msg[256];
+ u8 chunk[48];
+ u8 cur_offset;
+ u8 cur_len;
+ struct drm_dp_mst_branch *dst;
+ struct list_head next;
+ int seqno;
+ int state;
+ bool path_msg;
+ struct drm_dp_sideband_msg_reply_body reply;
+};
+
+/* sideband msg handler */
+struct drm_dp_mst_topology_mgr;
+struct drm_dp_mst_topology_cbs {
+ /* create a connector for a port */
+ struct drm_connector *(*add_connector)(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port, const char *path);
+ /*
+ * Checks for any pending MST interrupts, passing them to MST core for
+ * processing, the same way an HPD IRQ pulse handler would do this.
+ * If provided MST core calls this callback from a poll-waiting loop
+ * when waiting for MST down message replies. The driver is expected
+ * to guard against a race between this callback and the driver's HPD
+ * IRQ pulse handler.
+ */
+ void (*poll_hpd_irq)(struct drm_dp_mst_topology_mgr *mgr);
+};
+
+#define to_dp_mst_topology_state(x) container_of(x, struct drm_dp_mst_topology_state, base)
+
+/**
+ * struct drm_dp_mst_atomic_payload - Atomic state struct for an MST payload
+ *
+ * The primary atomic state structure for a given MST payload. Stores information like current
+ * bandwidth allocation, intended action for this payload, etc.
+ */
+struct drm_dp_mst_atomic_payload {
+ /** @port: The MST port assigned to this payload */
+ struct drm_dp_mst_port *port;
+
+ /**
+ * @vc_start_slot: The time slot that this payload starts on. Because payload start slots
+ * can't be determined ahead of time, the contents of this value are UNDEFINED at atomic
+ * check time. This shouldn't usually matter, as the start slot should never be relevant for
+ * atomic state computations.
+ *
+ * Since this value is determined at commit time instead of check time, this value is
+ * protected by the MST helpers ensuring that async commits operating on the given topology
+ * never run in parallel. In the event that a driver does need to read this value (e.g. to
+ * inform hardware of the starting timeslot for a payload), the driver may either:
+ *
+ * * Read this field during the atomic commit after
+ * drm_dp_mst_atomic_wait_for_dependencies() has been called, which will ensure the
+ * previous MST states payload start slots have been copied over to the new state. Note
+ * that a new start slot won't be assigned/removed from this payload until
+ * drm_dp_add_payload_part1()/drm_dp_remove_payload() have been called.
+ * * Acquire the MST modesetting lock, and then wait for any pending MST-related commits to
+ * get committed to hardware by calling drm_crtc_commit_wait() on each of the
+ * &drm_crtc_commit structs in &drm_dp_mst_topology_state.commit_deps.
+ *
+ * If neither of the two above solutions suffice (e.g. the driver needs to read the start
+ * slot in the middle of an atomic commit without waiting for some reason), then drivers
+ * should cache this value themselves after changing payloads.
+ */
+ s8 vc_start_slot;
+
+ /** @vcpi: The Virtual Channel Payload Identifier */
+ u8 vcpi;
+ /**
+ * @time_slots:
+ * The number of timeslots allocated to this payload from the source DP Tx to
+ * the immediate downstream DP Rx
+ */
+ int time_slots;
+ /** @pbn: The payload bandwidth for this payload */
+ int pbn;
+
+ /** @delete: Whether or not we intend to delete this payload during this atomic commit */
+ bool delete : 1;
+ /** @dsc_enabled: Whether or not this payload has DSC enabled */
+ bool dsc_enabled : 1;
+
+ /** @next: The list node for this payload */
+ struct list_head next;
+};
+
+/**
+ * struct drm_dp_mst_topology_state - DisplayPort MST topology atomic state
+ *
+ * This struct represents the atomic state of the toplevel DisplayPort MST manager
+ */
+struct drm_dp_mst_topology_state {
+ /** @base: Base private state for atomic */
+ struct drm_private_state base;
+
+ /** @mgr: The topology manager */
+ struct drm_dp_mst_topology_mgr *mgr;
+
+ /**
+ * @pending_crtc_mask: A bitmask of all CRTCs this topology state touches, drivers may
+ * modify this to add additional dependencies if needed.
+ */
+ u32 pending_crtc_mask;
+ /**
+ * @commit_deps: A list of all CRTC commits affecting this topology, this field isn't
+ * populated until drm_dp_mst_atomic_wait_for_dependencies() is called.
+ */
+ struct drm_crtc_commit **commit_deps;
+ /** @num_commit_deps: The number of CRTC commits in @commit_deps */
+ size_t num_commit_deps;
+
+ /** @payload_mask: A bitmask of allocated VCPIs, used for VCPI assignments */
+ u32 payload_mask;
+ /** @payloads: The list of payloads being created/destroyed in this state */
+ struct list_head payloads;
+
+ /** @total_avail_slots: The total number of slots this topology can handle (63 or 64) */
+ u8 total_avail_slots;
+ /** @start_slot: The first usable time slot in this topology (1 or 0) */
+ u8 start_slot;
+
+ /**
+ * @pbn_div: The current PBN divisor for this topology. The driver is expected to fill this
+ * out itself.
+ */
+ int pbn_div;
+};
+
+#define to_dp_mst_topology_mgr(x) container_of(x, struct drm_dp_mst_topology_mgr, base)
+
+/**
+ * struct drm_dp_mst_topology_mgr - DisplayPort MST manager
+ *
+ * This struct represents the toplevel displayport MST topology manager.
+ * There should be one instance of this for every MST capable DP connector
+ * on the GPU.
+ */
+struct drm_dp_mst_topology_mgr {
+ /**
+ * @base: Base private object for atomic
+ */
+ struct drm_private_obj base;
+
+ /**
+ * @dev: device pointer for adding i2c devices etc.
+ */
+ struct drm_device *dev;
+ /**
+ * @cbs: callbacks for connector addition and destruction.
+ */
+ const struct drm_dp_mst_topology_cbs *cbs;
+ /**
+ * @max_dpcd_transaction_bytes: maximum number of bytes to read/write
+ * in one go.
+ */
+ int max_dpcd_transaction_bytes;
+ /**
+ * @aux: AUX channel for the DP MST connector this topolgy mgr is
+ * controlling.
+ */
+ struct drm_dp_aux *aux;
+ /**
+ * @max_payloads: maximum number of payloads the GPU can generate.
+ */
+ int max_payloads;
+ /**
+ * @conn_base_id: DRM connector ID this mgr is connected to. Only used
+ * to build the MST connector path value.
+ */
+ int conn_base_id;
+
+ /**
+ * @up_req_recv: Message receiver state for up requests.
+ */
+ struct drm_dp_sideband_msg_rx up_req_recv;
+
+ /**
+ * @down_rep_recv: Message receiver state for replies to down
+ * requests.
+ */
+ struct drm_dp_sideband_msg_rx down_rep_recv;
+
+ /**
+ * @lock: protects @mst_state, @mst_primary, @dpcd, and
+ * @payload_id_table_cleared.
+ */
+ struct mutex lock;
+
+ /**
+ * @probe_lock: Prevents @work and @up_req_work, the only writers of
+ * &drm_dp_mst_port.mstb and &drm_dp_mst_branch.ports, from racing
+ * while they update the topology.
+ */
+ struct mutex probe_lock;
+
+ /**
+ * @mst_state: If this manager is enabled for an MST capable port. False
+ * if no MST sink/branch devices is connected.
+ */
+ bool mst_state : 1;
+
+ /**
+ * @payload_id_table_cleared: Whether or not we've cleared the payload
+ * ID table for @mst_primary. Protected by @lock.
+ */
+ bool payload_id_table_cleared : 1;
+
+ /**
+ * @payload_count: The number of currently active payloads in hardware. This value is only
+ * intended to be used internally by MST helpers for payload tracking, and is only safe to
+ * read/write from the atomic commit (not check) context.
+ */
+ u8 payload_count;
+
+ /**
+ * @next_start_slot: The starting timeslot to use for new VC payloads. This value is used
+ * internally by MST helpers for payload tracking, and is only safe to read/write from the
+ * atomic commit (not check) context.
+ */
+ u8 next_start_slot;
+
+ /**
+ * @mst_primary: Pointer to the primary/first branch device.
+ */
+ struct drm_dp_mst_branch *mst_primary;
+
+ /**
+ * @dpcd: Cache of DPCD for primary port.
+ */
+ u8 dpcd[DP_RECEIVER_CAP_SIZE];
+ /**
+ * @sink_count: Sink count from DEVICE_SERVICE_IRQ_VECTOR_ESI0.
+ */
+ u8 sink_count;
+
+ /**
+ * @funcs: Atomic helper callbacks
+ */
+ const struct drm_private_state_funcs *funcs;
+
+ /**
+ * @qlock: protects @tx_msg_downq and &drm_dp_sideband_msg_tx.state
+ */
+ struct mutex qlock;
+
+ /**
+ * @tx_msg_downq: List of pending down requests
+ */
+ struct list_head tx_msg_downq;
+
+ /**
+ * @tx_waitq: Wait to queue stall for the tx worker.
+ */
+ wait_queue_head_t tx_waitq;
+ /**
+ * @work: Probe work.
+ */
+ struct work_struct work;
+ /**
+ * @tx_work: Sideband transmit worker. This can nest within the main
+ * @work worker for each transaction @work launches.
+ */
+ struct work_struct tx_work;
+
+ /**
+ * @destroy_port_list: List of to be destroyed connectors.
+ */
+ struct list_head destroy_port_list;
+ /**
+ * @destroy_branch_device_list: List of to be destroyed branch
+ * devices.
+ */
+ struct list_head destroy_branch_device_list;
+ /**
+ * @delayed_destroy_lock: Protects @destroy_port_list and
+ * @destroy_branch_device_list.
+ */
+ struct mutex delayed_destroy_lock;
+
+ /**
+ * @delayed_destroy_wq: Workqueue used for delayed_destroy_work items.
+ * A dedicated WQ makes it possible to drain any requeued work items
+ * on it.
+ */
+ struct workqueue_struct *delayed_destroy_wq;
+
+ /**
+ * @delayed_destroy_work: Work item to destroy MST port and branch
+ * devices, needed to avoid locking inversion.
+ */
+ struct work_struct delayed_destroy_work;
+
+ /**
+ * @up_req_list: List of pending up requests from the topology that
+ * need to be processed, in chronological order.
+ */
+ struct list_head up_req_list;
+ /**
+ * @up_req_lock: Protects @up_req_list
+ */
+ struct mutex up_req_lock;
+ /**
+ * @up_req_work: Work item to process up requests received from the
+ * topology. Needed to avoid blocking hotplug handling and sideband
+ * transmissions.
+ */
+ struct work_struct up_req_work;
+
+#if IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS)
+ /**
+ * @topology_ref_history_lock: protects
+ * &drm_dp_mst_port.topology_ref_history and
+ * &drm_dp_mst_branch.topology_ref_history.
+ */
+ struct mutex topology_ref_history_lock;
+#endif
+};
+
+int drm_dp_mst_topology_mgr_init(struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_device *dev, struct drm_dp_aux *aux,
+ int max_dpcd_transaction_bytes,
+ int max_payloads, int conn_base_id);
+
+void drm_dp_mst_topology_mgr_destroy(struct drm_dp_mst_topology_mgr *mgr);
+
+bool drm_dp_read_mst_cap(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE]);
+int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool mst_state);
+
+int drm_dp_mst_hpd_irq_handle_event(struct drm_dp_mst_topology_mgr *mgr,
+ const u8 *esi,
+ u8 *ack,
+ bool *handled);
+void drm_dp_mst_hpd_irq_send_new_request(struct drm_dp_mst_topology_mgr *mgr);
+
+int
+drm_dp_mst_detect_port(struct drm_connector *connector,
+ struct drm_modeset_acquire_ctx *ctx,
+ struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_dp_mst_port *port);
+
+struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port);
+
+int drm_dp_get_vc_payload_bw(const struct drm_dp_mst_topology_mgr *mgr,
+ int link_rate, int link_lane_count);
+
+int drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc);
+
+void drm_dp_mst_update_slots(struct drm_dp_mst_topology_state *mst_state, uint8_t link_encoding_cap);
+
+int drm_dp_add_payload_part1(struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_dp_mst_topology_state *mst_state,
+ struct drm_dp_mst_atomic_payload *payload);
+int drm_dp_add_payload_part2(struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_atomic_state *state,
+ struct drm_dp_mst_atomic_payload *payload);
+void drm_dp_remove_payload(struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_dp_mst_topology_state *mst_state,
+ const struct drm_dp_mst_atomic_payload *old_payload,
+ struct drm_dp_mst_atomic_payload *new_payload);
+
+int drm_dp_check_act_status(struct drm_dp_mst_topology_mgr *mgr);
+
+void drm_dp_mst_dump_topology(struct seq_file *m,
+ struct drm_dp_mst_topology_mgr *mgr);
+
+void drm_dp_mst_topology_mgr_suspend(struct drm_dp_mst_topology_mgr *mgr);
+int __must_check
+drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr,
+ bool sync);
+
+ssize_t drm_dp_mst_dpcd_read(struct drm_dp_aux *aux,
+ unsigned int offset, void *buffer, size_t size);
+ssize_t drm_dp_mst_dpcd_write(struct drm_dp_aux *aux,
+ unsigned int offset, void *buffer, size_t size);
+
+int drm_dp_mst_connector_late_register(struct drm_connector *connector,
+ struct drm_dp_mst_port *port);
+void drm_dp_mst_connector_early_unregister(struct drm_connector *connector,
+ struct drm_dp_mst_port *port);
+
+struct drm_dp_mst_topology_state *
+drm_atomic_get_mst_topology_state(struct drm_atomic_state *state,
+ struct drm_dp_mst_topology_mgr *mgr);
+struct drm_dp_mst_topology_state *
+drm_atomic_get_old_mst_topology_state(struct drm_atomic_state *state,
+ struct drm_dp_mst_topology_mgr *mgr);
+struct drm_dp_mst_topology_state *
+drm_atomic_get_new_mst_topology_state(struct drm_atomic_state *state,
+ struct drm_dp_mst_topology_mgr *mgr);
+struct drm_dp_mst_atomic_payload *
+drm_atomic_get_mst_payload_state(struct drm_dp_mst_topology_state *state,
+ struct drm_dp_mst_port *port);
+int __must_check
+drm_dp_atomic_find_time_slots(struct drm_atomic_state *state,
+ struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_dp_mst_port *port, int pbn);
+int drm_dp_mst_atomic_enable_dsc(struct drm_atomic_state *state,
+ struct drm_dp_mst_port *port,
+ int pbn, bool enable);
+int __must_check
+drm_dp_mst_add_affected_dsc_crtcs(struct drm_atomic_state *state,
+ struct drm_dp_mst_topology_mgr *mgr);
+int __must_check
+drm_dp_atomic_release_time_slots(struct drm_atomic_state *state,
+ struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_dp_mst_port *port);
+void drm_dp_mst_atomic_wait_for_dependencies(struct drm_atomic_state *state);
+int __must_check drm_dp_mst_atomic_setup_commit(struct drm_atomic_state *state);
+int drm_dp_send_power_updown_phy(struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_dp_mst_port *port, bool power_up);
+int drm_dp_send_query_stream_enc_status(struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_dp_mst_port *port,
+ struct drm_dp_query_stream_enc_status_ack_reply *status);
+int __must_check drm_dp_mst_atomic_check(struct drm_atomic_state *state);
+int __must_check drm_dp_mst_root_conn_atomic_check(struct drm_connector_state *new_conn_state,
+ struct drm_dp_mst_topology_mgr *mgr);
+
+void drm_dp_mst_get_port_malloc(struct drm_dp_mst_port *port);
+void drm_dp_mst_put_port_malloc(struct drm_dp_mst_port *port);
+
+struct drm_dp_aux *drm_dp_mst_dsc_aux_for_port(struct drm_dp_mst_port *port);
+
+static inline struct drm_dp_mst_topology_state *
+to_drm_dp_mst_topology_state(struct drm_private_state *state)
+{
+ return container_of(state, struct drm_dp_mst_topology_state, base);
+}
+
+extern const struct drm_private_state_funcs drm_dp_mst_topology_state_funcs;
+
+/**
+ * __drm_dp_mst_state_iter_get - private atomic state iterator function for
+ * macro-internal use
+ * @state: &struct drm_atomic_state pointer
+ * @mgr: pointer to the &struct drm_dp_mst_topology_mgr iteration cursor
+ * @old_state: optional pointer to the old &struct drm_dp_mst_topology_state
+ * iteration cursor
+ * @new_state: optional pointer to the new &struct drm_dp_mst_topology_state
+ * iteration cursor
+ * @i: int iteration cursor, for macro-internal use
+ *
+ * Used by for_each_oldnew_mst_mgr_in_state(),
+ * for_each_old_mst_mgr_in_state(), and for_each_new_mst_mgr_in_state(). Don't
+ * call this directly.
+ *
+ * Returns:
+ * True if the current &struct drm_private_obj is a &struct
+ * drm_dp_mst_topology_mgr, false otherwise.
+ */
+static inline bool
+__drm_dp_mst_state_iter_get(struct drm_atomic_state *state,
+ struct drm_dp_mst_topology_mgr **mgr,
+ struct drm_dp_mst_topology_state **old_state,
+ struct drm_dp_mst_topology_state **new_state,
+ int i)
+{
+ struct __drm_private_objs_state *objs_state = &state->private_objs[i];
+
+ if (objs_state->ptr->funcs != &drm_dp_mst_topology_state_funcs)
+ return false;
+
+ *mgr = to_dp_mst_topology_mgr(objs_state->ptr);
+ if (old_state)
+ *old_state = to_dp_mst_topology_state(objs_state->old_state);
+ if (new_state)
+ *new_state = to_dp_mst_topology_state(objs_state->new_state);
+
+ return true;
+}
+
+/**
+ * for_each_oldnew_mst_mgr_in_state - iterate over all DP MST topology
+ * managers in an atomic update
+ * @__state: &struct drm_atomic_state pointer
+ * @mgr: &struct drm_dp_mst_topology_mgr iteration cursor
+ * @old_state: &struct drm_dp_mst_topology_state iteration cursor for the old
+ * state
+ * @new_state: &struct drm_dp_mst_topology_state iteration cursor for the new
+ * state
+ * @__i: int iteration cursor, for macro-internal use
+ *
+ * This iterates over all DRM DP MST topology managers in an atomic update,
+ * tracking both old and new state. This is useful in places where the state
+ * delta needs to be considered, for example in atomic check functions.
+ */
+#define for_each_oldnew_mst_mgr_in_state(__state, mgr, old_state, new_state, __i) \
+ for ((__i) = 0; (__i) < (__state)->num_private_objs; (__i)++) \
+ for_each_if(__drm_dp_mst_state_iter_get((__state), &(mgr), &(old_state), &(new_state), (__i)))
+
+/**
+ * for_each_old_mst_mgr_in_state - iterate over all DP MST topology managers
+ * in an atomic update
+ * @__state: &struct drm_atomic_state pointer
+ * @mgr: &struct drm_dp_mst_topology_mgr iteration cursor
+ * @old_state: &struct drm_dp_mst_topology_state iteration cursor for the old
+ * state
+ * @__i: int iteration cursor, for macro-internal use
+ *
+ * This iterates over all DRM DP MST topology managers in an atomic update,
+ * tracking only the old state. This is useful in disable functions, where we
+ * need the old state the hardware is still in.
+ */
+#define for_each_old_mst_mgr_in_state(__state, mgr, old_state, __i) \
+ for ((__i) = 0; (__i) < (__state)->num_private_objs; (__i)++) \
+ for_each_if(__drm_dp_mst_state_iter_get((__state), &(mgr), &(old_state), NULL, (__i)))
+
+/**
+ * for_each_new_mst_mgr_in_state - iterate over all DP MST topology managers
+ * in an atomic update
+ * @__state: &struct drm_atomic_state pointer
+ * @mgr: &struct drm_dp_mst_topology_mgr iteration cursor
+ * @new_state: &struct drm_dp_mst_topology_state iteration cursor for the new
+ * state
+ * @__i: int iteration cursor, for macro-internal use
+ *
+ * This iterates over all DRM DP MST topology managers in an atomic update,
+ * tracking only the new state. This is useful in enable functions, where we
+ * need the new state the hardware should be in when the atomic commit
+ * operation has completed.
+ */
+#define for_each_new_mst_mgr_in_state(__state, mgr, new_state, __i) \
+ for ((__i) = 0; (__i) < (__state)->num_private_objs; (__i)++) \
+ for_each_if(__drm_dp_mst_state_iter_get((__state), &(mgr), NULL, &(new_state), (__i)))
+
+#endif
diff --git a/include/drm/display/drm_dsc.h b/include/drm/display/drm_dsc.h
new file mode 100644
index 000000000..bc90273d0
--- /dev/null
+++ b/include/drm/display/drm_dsc.h
@@ -0,0 +1,605 @@
+/* SPDX-License-Identifier: MIT
+ * Copyright (C) 2018 Intel Corp.
+ *
+ * Authors:
+ * Manasi Navare <manasi.d.navare@intel.com>
+ */
+
+#ifndef DRM_DSC_H_
+#define DRM_DSC_H_
+
+#include <drm/display/drm_dp.h>
+
+/* VESA Display Stream Compression DSC 1.2 constants */
+#define DSC_NUM_BUF_RANGES 15
+#define DSC_MUX_WORD_SIZE_8_10_BPC 48
+#define DSC_MUX_WORD_SIZE_12_BPC 64
+#define DSC_RC_PIXELS_PER_GROUP 3
+#define DSC_SCALE_DECREMENT_INTERVAL_MAX 4095
+#define DSC_RANGE_BPG_OFFSET_MASK 0x3f
+
+/* DSC Rate Control Constants */
+#define DSC_RC_MODEL_SIZE_CONST 8192
+#define DSC_RC_EDGE_FACTOR_CONST 6
+#define DSC_RC_TGT_OFFSET_HI_CONST 3
+#define DSC_RC_TGT_OFFSET_LO_CONST 3
+
+/* DSC PPS constants and macros */
+#define DSC_PPS_VERSION_MAJOR_SHIFT 4
+#define DSC_PPS_BPC_SHIFT 4
+#define DSC_PPS_MSB_SHIFT 8
+#define DSC_PPS_LSB_MASK (0xFF << 0)
+#define DSC_PPS_BPP_HIGH_MASK (0x3 << 8)
+#define DSC_PPS_VBR_EN_SHIFT 2
+#define DSC_PPS_SIMPLE422_SHIFT 3
+#define DSC_PPS_CONVERT_RGB_SHIFT 4
+#define DSC_PPS_BLOCK_PRED_EN_SHIFT 5
+#define DSC_PPS_INIT_XMIT_DELAY_HIGH_MASK (0x3 << 8)
+#define DSC_PPS_SCALE_DEC_INT_HIGH_MASK (0xF << 8)
+#define DSC_PPS_RC_TGT_OFFSET_HI_SHIFT 4
+#define DSC_PPS_RC_RANGE_MINQP_SHIFT 11
+#define DSC_PPS_RC_RANGE_MAXQP_SHIFT 6
+#define DSC_PPS_NATIVE_420_SHIFT 1
+#define DSC_1_2_MAX_LINEBUF_DEPTH_BITS 16
+#define DSC_1_2_MAX_LINEBUF_DEPTH_VAL 0
+#define DSC_1_1_MAX_LINEBUF_DEPTH_BITS 13
+
+/**
+ * struct drm_dsc_rc_range_parameters - DSC Rate Control range parameters
+ *
+ * This defines different rate control parameters used by the DSC engine
+ * to compress the frame.
+ */
+struct drm_dsc_rc_range_parameters {
+ /**
+ * @range_min_qp: Min Quantization Parameters allowed for this range
+ */
+ u8 range_min_qp;
+ /**
+ * @range_max_qp: Max Quantization Parameters allowed for this range
+ */
+ u8 range_max_qp;
+ /**
+ * @range_bpg_offset:
+ * Bits/group offset to apply to target for this group
+ */
+ u8 range_bpg_offset;
+};
+
+/**
+ * struct drm_dsc_config - Parameters required to configure DSC
+ *
+ * Driver populates this structure with all the parameters required
+ * to configure the display stream compression on the source.
+ */
+struct drm_dsc_config {
+ /**
+ * @line_buf_depth:
+ * Bits per component for previous reconstructed line buffer
+ */
+ u8 line_buf_depth;
+ /**
+ * @bits_per_component: Bits per component to code (8/10/12)
+ */
+ u8 bits_per_component;
+ /**
+ * @convert_rgb:
+ * Flag to indicate if RGB - YCoCg conversion is needed
+ * True if RGB input, False if YCoCg input
+ */
+ bool convert_rgb;
+ /**
+ * @slice_count: Number fo slices per line used by the DSC encoder
+ */
+ u8 slice_count;
+ /**
+ * @slice_width: Width of each slice in pixels
+ */
+ u16 slice_width;
+ /**
+ * @slice_height: Slice height in pixels
+ */
+ u16 slice_height;
+ /**
+ * @simple_422: True if simple 4_2_2 mode is enabled else False
+ */
+ bool simple_422;
+ /**
+ * @pic_width: Width of the input display frame in pixels
+ */
+ u16 pic_width;
+ /**
+ * @pic_height: Vertical height of the input display frame
+ */
+ u16 pic_height;
+ /**
+ * @rc_tgt_offset_high:
+ * Offset to bits/group used by RC to determine QP adjustment
+ */
+ u8 rc_tgt_offset_high;
+ /**
+ * @rc_tgt_offset_low:
+ * Offset to bits/group used by RC to determine QP adjustment
+ */
+ u8 rc_tgt_offset_low;
+ /**
+ * @bits_per_pixel:
+ * Target bits per pixel with 4 fractional bits, bits_per_pixel << 4
+ */
+ u16 bits_per_pixel;
+ /**
+ * @rc_edge_factor:
+ * Factor to determine if an edge is present based on the bits produced
+ */
+ u8 rc_edge_factor;
+ /**
+ * @rc_quant_incr_limit1:
+ * Slow down incrementing once the range reaches this value
+ */
+ u8 rc_quant_incr_limit1;
+ /**
+ * @rc_quant_incr_limit0:
+ * Slow down incrementing once the range reaches this value
+ */
+ u8 rc_quant_incr_limit0;
+ /**
+ * @initial_xmit_delay:
+ * Number of pixels to delay the initial transmission
+ */
+ u16 initial_xmit_delay;
+ /**
+ * @initial_dec_delay:
+ * Initial decoder delay, number of pixel times that the decoder
+ * accumulates data in its rate buffer before starting to decode
+ * and output pixels.
+ */
+ u16 initial_dec_delay;
+ /**
+ * @block_pred_enable:
+ * True if block prediction is used to code any groups within the
+ * picture. False if BP not used
+ */
+ bool block_pred_enable;
+ /**
+ * @first_line_bpg_offset:
+ * Number of additional bits allocated for each group on the first
+ * line of slice.
+ */
+ u8 first_line_bpg_offset;
+ /**
+ * @initial_offset: Value to use for RC model offset at slice start
+ */
+ u16 initial_offset;
+ /**
+ * @rc_buf_thresh: Thresholds defining each of the buffer ranges
+ */
+ u16 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1];
+ /**
+ * @rc_range_params:
+ * Parameters for each of the RC ranges defined in
+ * &struct drm_dsc_rc_range_parameters
+ */
+ struct drm_dsc_rc_range_parameters rc_range_params[DSC_NUM_BUF_RANGES];
+ /**
+ * @rc_model_size: Total size of RC model
+ */
+ u16 rc_model_size;
+ /**
+ * @flatness_min_qp: Minimum QP where flatness information is sent
+ */
+ u8 flatness_min_qp;
+ /**
+ * @flatness_max_qp: Maximum QP where flatness information is sent
+ */
+ u8 flatness_max_qp;
+ /**
+ * @initial_scale_value: Initial value for the scale factor
+ */
+ u8 initial_scale_value;
+ /**
+ * @scale_decrement_interval:
+ * Specifies number of group times between decrementing the scale factor
+ * at beginning of a slice.
+ */
+ u16 scale_decrement_interval;
+ /**
+ * @scale_increment_interval:
+ * Number of group times between incrementing the scale factor value
+ * used at the beginning of a slice.
+ */
+ u16 scale_increment_interval;
+ /**
+ * @nfl_bpg_offset: Non first line BPG offset to be used
+ */
+ u16 nfl_bpg_offset;
+ /**
+ * @slice_bpg_offset: BPG offset used to enforce slice bit
+ */
+ u16 slice_bpg_offset;
+ /**
+ * @final_offset: Final RC linear transformation offset value
+ */
+ u16 final_offset;
+ /**
+ * @vbr_enable: True if VBR mode is enabled, false if disabled
+ */
+ bool vbr_enable;
+ /**
+ * @mux_word_size: Mux word size (in bits) for SSM mode
+ */
+ u8 mux_word_size;
+ /**
+ * @slice_chunk_size:
+ * The (max) size in bytes of the "chunks" that are used in slice
+ * multiplexing.
+ */
+ u16 slice_chunk_size;
+ /**
+ * @rc_bits: Rate control buffer size in bits
+ */
+ u16 rc_bits;
+ /**
+ * @dsc_version_minor: DSC minor version
+ */
+ u8 dsc_version_minor;
+ /**
+ * @dsc_version_major: DSC major version
+ */
+ u8 dsc_version_major;
+ /**
+ * @native_422: True if Native 4:2:2 supported, else false
+ */
+ bool native_422;
+ /**
+ * @native_420: True if Native 4:2:0 supported else false.
+ */
+ bool native_420;
+ /**
+ * @second_line_bpg_offset:
+ * Additional bits/grp for seconnd line of slice for native 4:2:0
+ */
+ u8 second_line_bpg_offset;
+ /**
+ * @nsl_bpg_offset:
+ * Num of bits deallocated for each grp that is not in second line of
+ * slice
+ */
+ u16 nsl_bpg_offset;
+ /**
+ * @second_line_offset_adj:
+ * Offset adjustment for second line in Native 4:2:0 mode
+ */
+ u16 second_line_offset_adj;
+};
+
+/**
+ * struct drm_dsc_picture_parameter_set - Represents 128 bytes of
+ * Picture Parameter Set
+ *
+ * The VESA DSC standard defines picture parameter set (PPS) which display
+ * stream compression encoders must communicate to decoders.
+ * The PPS is encapsulated in 128 bytes (PPS 0 through PPS 127). The fields in
+ * this structure are as per Table 4.1 in Vesa DSC specification v1.1/v1.2.
+ * The PPS fields that span over more than a byte should be stored in Big Endian
+ * format.
+ */
+struct drm_dsc_picture_parameter_set {
+ /**
+ * @dsc_version:
+ * PPS0[3:0] - dsc_version_minor: Contains Minor version of DSC
+ * PPS0[7:4] - dsc_version_major: Contains major version of DSC
+ */
+ u8 dsc_version;
+ /**
+ * @pps_identifier:
+ * PPS1[7:0] - Application specific identifier that can be
+ * used to differentiate between different PPS tables.
+ */
+ u8 pps_identifier;
+ /**
+ * @pps_reserved:
+ * PPS2[7:0]- RESERVED Byte
+ */
+ u8 pps_reserved;
+ /**
+ * @pps_3:
+ * PPS3[3:0] - linebuf_depth: Contains linebuffer bit depth used to
+ * generate the bitstream. (0x0 - 16 bits for DSC 1.2, 0x8 - 8 bits,
+ * 0xA - 10 bits, 0xB - 11 bits, 0xC - 12 bits, 0xD - 13 bits,
+ * 0xE - 14 bits for DSC1.2, 0xF - 14 bits for DSC 1.2.
+ * PPS3[7:4] - bits_per_component: Bits per component for the original
+ * pixels of the encoded picture.
+ * 0x0 = 16bpc (allowed only when dsc_version_minor = 0x2)
+ * 0x8 = 8bpc, 0xA = 10bpc, 0xC = 12bpc, 0xE = 14bpc (also
+ * allowed only when dsc_minor_version = 0x2)
+ */
+ u8 pps_3;
+ /**
+ * @pps_4:
+ * PPS4[1:0] -These are the most significant 2 bits of
+ * compressed BPP bits_per_pixel[9:0] syntax element.
+ * PPS4[2] - vbr_enable: 0 = VBR disabled, 1 = VBR enabled
+ * PPS4[3] - simple_422: Indicates if decoder drops samples to
+ * reconstruct the 4:2:2 picture.
+ * PPS4[4] - Convert_rgb: Indicates if DSC color space conversion is
+ * active.
+ * PPS4[5] - blobk_pred_enable: Indicates if BP is used to code any
+ * groups in picture
+ * PPS4[7:6] - Reseved bits
+ */
+ u8 pps_4;
+ /**
+ * @bits_per_pixel_low:
+ * PPS5[7:0] - This indicates the lower significant 8 bits of
+ * the compressed BPP bits_per_pixel[9:0] element.
+ */
+ u8 bits_per_pixel_low;
+ /**
+ * @pic_height:
+ * PPS6[7:0], PPS7[7:0] -pic_height: Specifies the number of pixel rows
+ * within the raster.
+ */
+ __be16 pic_height;
+ /**
+ * @pic_width:
+ * PPS8[7:0], PPS9[7:0] - pic_width: Number of pixel columns within
+ * the raster.
+ */
+ __be16 pic_width;
+ /**
+ * @slice_height:
+ * PPS10[7:0], PPS11[7:0] - Slice height in units of pixels.
+ */
+ __be16 slice_height;
+ /**
+ * @slice_width:
+ * PPS12[7:0], PPS13[7:0] - Slice width in terms of pixels.
+ */
+ __be16 slice_width;
+ /**
+ * @chunk_size:
+ * PPS14[7:0], PPS15[7:0] - Size in units of bytes of the chunks
+ * that are used for slice multiplexing.
+ */
+ __be16 chunk_size;
+ /**
+ * @initial_xmit_delay_high:
+ * PPS16[1:0] - Most Significant two bits of initial transmission delay.
+ * It specifies the number of pixel times that the encoder waits before
+ * transmitting data from its rate buffer.
+ * PPS16[7:2] - Reserved
+ */
+ u8 initial_xmit_delay_high;
+ /**
+ * @initial_xmit_delay_low:
+ * PPS17[7:0] - Least significant 8 bits of initial transmission delay.
+ */
+ u8 initial_xmit_delay_low;
+ /**
+ * @initial_dec_delay:
+ *
+ * PPS18[7:0], PPS19[7:0] - Initial decoding delay which is the number
+ * of pixel times that the decoder accumulates data in its rate buffer
+ * before starting to decode and output pixels.
+ */
+ __be16 initial_dec_delay;
+ /**
+ * @pps20_reserved:
+ *
+ * PPS20[7:0] - Reserved
+ */
+ u8 pps20_reserved;
+ /**
+ * @initial_scale_value:
+ * PPS21[5:0] - Initial rcXformScale factor used at beginning
+ * of a slice.
+ * PPS21[7:6] - Reserved
+ */
+ u8 initial_scale_value;
+ /**
+ * @scale_increment_interval:
+ * PPS22[7:0], PPS23[7:0] - Number of group times between incrementing
+ * the rcXformScale factor at end of a slice.
+ */
+ __be16 scale_increment_interval;
+ /**
+ * @scale_decrement_interval_high:
+ * PPS24[3:0] - Higher 4 bits indicating number of group times between
+ * decrementing the rcXformScale factor at beginning of a slice.
+ * PPS24[7:4] - Reserved
+ */
+ u8 scale_decrement_interval_high;
+ /**
+ * @scale_decrement_interval_low:
+ * PPS25[7:0] - Lower 8 bits of scale decrement interval
+ */
+ u8 scale_decrement_interval_low;
+ /**
+ * @pps26_reserved:
+ * PPS26[7:0]
+ */
+ u8 pps26_reserved;
+ /**
+ * @first_line_bpg_offset:
+ * PPS27[4:0] - Number of additional bits that are allocated
+ * for each group on first line of a slice.
+ * PPS27[7:5] - Reserved
+ */
+ u8 first_line_bpg_offset;
+ /**
+ * @nfl_bpg_offset:
+ * PPS28[7:0], PPS29[7:0] - Number of bits including frac bits
+ * deallocated for each group for groups after the first line of slice.
+ */
+ __be16 nfl_bpg_offset;
+ /**
+ * @slice_bpg_offset:
+ * PPS30, PPS31[7:0] - Number of bits that are deallocated for each
+ * group to enforce the slice constraint.
+ */
+ __be16 slice_bpg_offset;
+ /**
+ * @initial_offset:
+ * PPS32,33[7:0] - Initial value for rcXformOffset
+ */
+ __be16 initial_offset;
+ /**
+ * @final_offset:
+ * PPS34,35[7:0] - Maximum end-of-slice value for rcXformOffset
+ */
+ __be16 final_offset;
+ /**
+ * @flatness_min_qp:
+ * PPS36[4:0] - Minimum QP at which flatness is signaled and
+ * flatness QP adjustment is made.
+ * PPS36[7:5] - Reserved
+ */
+ u8 flatness_min_qp;
+ /**
+ * @flatness_max_qp:
+ * PPS37[4:0] - Max QP at which flatness is signalled and
+ * the flatness adjustment is made.
+ * PPS37[7:5] - Reserved
+ */
+ u8 flatness_max_qp;
+ /**
+ * @rc_model_size:
+ * PPS38,39[7:0] - Number of bits within RC Model.
+ */
+ __be16 rc_model_size;
+ /**
+ * @rc_edge_factor:
+ * PPS40[3:0] - Ratio of current activity vs, previous
+ * activity to determine presence of edge.
+ * PPS40[7:4] - Reserved
+ */
+ u8 rc_edge_factor;
+ /**
+ * @rc_quant_incr_limit0:
+ * PPS41[4:0] - QP threshold used in short term RC
+ * PPS41[7:5] - Reserved
+ */
+ u8 rc_quant_incr_limit0;
+ /**
+ * @rc_quant_incr_limit1:
+ * PPS42[4:0] - QP threshold used in short term RC
+ * PPS42[7:5] - Reserved
+ */
+ u8 rc_quant_incr_limit1;
+ /**
+ * @rc_tgt_offset:
+ * PPS43[3:0] - Lower end of the variability range around the target
+ * bits per group that is allowed by short term RC.
+ * PPS43[7:4]- Upper end of the variability range around the target
+ * bits per group that i allowed by short term rc.
+ */
+ u8 rc_tgt_offset;
+ /**
+ * @rc_buf_thresh:
+ * PPS44[7:0] - PPS57[7:0] - Specifies the thresholds in RC model for
+ * the 15 ranges defined by 14 thresholds.
+ */
+ u8 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1];
+ /**
+ * @rc_range_parameters:
+ * PPS58[7:0] - PPS87[7:0]
+ * Parameters that correspond to each of the 15 ranges.
+ */
+ __be16 rc_range_parameters[DSC_NUM_BUF_RANGES];
+ /**
+ * @native_422_420:
+ * PPS88[0] - 0 = Native 4:2:2 not used
+ * 1 = Native 4:2:2 used
+ * PPS88[1] - 0 = Native 4:2:0 not use
+ * 1 = Native 4:2:0 used
+ * PPS88[7:2] - Reserved 6 bits
+ */
+ u8 native_422_420;
+ /**
+ * @second_line_bpg_offset:
+ * PPS89[4:0] - Additional bits/group budget for the
+ * second line of a slice in Native 4:2:0 mode.
+ * Set to 0 if DSC minor version is 1 or native420 is 0.
+ * PPS89[7:5] - Reserved
+ */
+ u8 second_line_bpg_offset;
+ /**
+ * @nsl_bpg_offset:
+ * PPS90[7:0], PPS91[7:0] - Number of bits that are deallocated
+ * for each group that is not in the second line of a slice.
+ */
+ __be16 nsl_bpg_offset;
+ /**
+ * @second_line_offset_adj:
+ * PPS92[7:0], PPS93[7:0] - Used as offset adjustment for the second
+ * line in Native 4:2:0 mode.
+ */
+ __be16 second_line_offset_adj;
+ /**
+ * @pps_long_94_reserved:
+ * PPS 94, 95, 96, 97 - Reserved
+ */
+ u32 pps_long_94_reserved;
+ /**
+ * @pps_long_98_reserved:
+ * PPS 98, 99, 100, 101 - Reserved
+ */
+ u32 pps_long_98_reserved;
+ /**
+ * @pps_long_102_reserved:
+ * PPS 102, 103, 104, 105 - Reserved
+ */
+ u32 pps_long_102_reserved;
+ /**
+ * @pps_long_106_reserved:
+ * PPS 106, 107, 108, 109 - reserved
+ */
+ u32 pps_long_106_reserved;
+ /**
+ * @pps_long_110_reserved:
+ * PPS 110, 111, 112, 113 - reserved
+ */
+ u32 pps_long_110_reserved;
+ /**
+ * @pps_long_114_reserved:
+ * PPS 114 - 117 - reserved
+ */
+ u32 pps_long_114_reserved;
+ /**
+ * @pps_long_118_reserved:
+ * PPS 118 - 121 - reserved
+ */
+ u32 pps_long_118_reserved;
+ /**
+ * @pps_long_122_reserved:
+ * PPS 122- 125 - reserved
+ */
+ u32 pps_long_122_reserved;
+ /**
+ * @pps_short_126_reserved:
+ * PPS 126, 127 - reserved
+ */
+ __be16 pps_short_126_reserved;
+} __packed;
+
+/**
+ * struct drm_dsc_pps_infoframe - DSC infoframe carrying the Picture Parameter
+ * Set Metadata
+ *
+ * This structure represents the DSC PPS infoframe required to send the Picture
+ * Parameter Set metadata required before enabling VESA Display Stream
+ * Compression. This is based on the DP Secondary Data Packet structure and
+ * comprises of SDP Header as defined &struct dp_sdp_header in drm_dp_helper.h
+ * and PPS payload defined in &struct drm_dsc_picture_parameter_set.
+ *
+ * @pps_header: Header for PPS as per DP SDP header format of type
+ * &struct dp_sdp_header
+ * @pps_payload: PPS payload fields as per DSC specification Table 4-1
+ * as represented in &struct drm_dsc_picture_parameter_set
+ */
+struct drm_dsc_pps_infoframe {
+ struct dp_sdp_header pps_header;
+ struct drm_dsc_picture_parameter_set pps_payload;
+} __packed;
+
+#endif /* _DRM_DSC_H_ */
diff --git a/include/drm/display/drm_dsc_helper.h b/include/drm/display/drm_dsc_helper.h
new file mode 100644
index 000000000..8b41edbba
--- /dev/null
+++ b/include/drm/display/drm_dsc_helper.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: MIT
+ * Copyright (C) 2018 Intel Corp.
+ *
+ * Authors:
+ * Manasi Navare <manasi.d.navare@intel.com>
+ */
+
+#ifndef DRM_DSC_HELPER_H_
+#define DRM_DSC_HELPER_H_
+
+#include <drm/display/drm_dsc.h>
+
+void drm_dsc_dp_pps_header_init(struct dp_sdp_header *pps_header);
+int drm_dsc_dp_rc_buffer_size(u8 rc_buffer_block_size, u8 rc_buffer_size);
+void drm_dsc_pps_payload_pack(struct drm_dsc_picture_parameter_set *pps_sdp,
+ const struct drm_dsc_config *dsc_cfg);
+int drm_dsc_compute_rc_parameters(struct drm_dsc_config *vdsc_cfg);
+
+#endif /* _DRM_DSC_HELPER_H_ */
+
diff --git a/include/drm/display/drm_hdcp.h b/include/drm/display/drm_hdcp.h
new file mode 100644
index 000000000..96a99b137
--- /dev/null
+++ b/include/drm/display/drm_hdcp.h
@@ -0,0 +1,298 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright (C) 2017 Google, Inc.
+ *
+ * Authors:
+ * Sean Paul <seanpaul@chromium.org>
+ */
+
+#ifndef _DRM_HDCP_H_
+#define _DRM_HDCP_H_
+
+#include <linux/types.h>
+
+/* Period of hdcp checks (to ensure we're still authenticated) */
+#define DRM_HDCP_CHECK_PERIOD_MS (128 * 16)
+#define DRM_HDCP2_CHECK_PERIOD_MS 500
+
+/* Shared lengths/masks between HDMI/DVI/DisplayPort */
+#define DRM_HDCP_AN_LEN 8
+#define DRM_HDCP_BSTATUS_LEN 2
+#define DRM_HDCP_KSV_LEN 5
+#define DRM_HDCP_RI_LEN 2
+#define DRM_HDCP_V_PRIME_PART_LEN 4
+#define DRM_HDCP_V_PRIME_NUM_PARTS 5
+#define DRM_HDCP_NUM_DOWNSTREAM(x) (x & 0x7f)
+#define DRM_HDCP_MAX_CASCADE_EXCEEDED(x) (x & BIT(3))
+#define DRM_HDCP_MAX_DEVICE_EXCEEDED(x) (x & BIT(7))
+
+/* Slave address for the HDCP registers in the receiver */
+#define DRM_HDCP_DDC_ADDR 0x3A
+
+/* Value to use at the end of the SHA-1 bytestream used for repeaters */
+#define DRM_HDCP_SHA1_TERMINATOR 0x80
+
+/* HDCP register offsets for HDMI/DVI devices */
+#define DRM_HDCP_DDC_BKSV 0x00
+#define DRM_HDCP_DDC_RI_PRIME 0x08
+#define DRM_HDCP_DDC_AKSV 0x10
+#define DRM_HDCP_DDC_AN 0x18
+#define DRM_HDCP_DDC_V_PRIME(h) (0x20 + h * 4)
+#define DRM_HDCP_DDC_BCAPS 0x40
+#define DRM_HDCP_DDC_BCAPS_REPEATER_PRESENT BIT(6)
+#define DRM_HDCP_DDC_BCAPS_KSV_FIFO_READY BIT(5)
+#define DRM_HDCP_DDC_BSTATUS 0x41
+#define DRM_HDCP_DDC_KSV_FIFO 0x43
+
+#define DRM_HDCP_1_4_SRM_ID 0x8
+#define DRM_HDCP_1_4_VRL_LENGTH_SIZE 3
+#define DRM_HDCP_1_4_DCP_SIG_SIZE 40
+
+/* Protocol message definition for HDCP2.2 specification */
+/*
+ * Protected content streams are classified into 2 types:
+ * - Type0: Can be transmitted with HDCP 1.4+
+ * - Type1: Can be transmitted with HDCP 2.2+
+ */
+#define HDCP_STREAM_TYPE0 0x00
+#define HDCP_STREAM_TYPE1 0x01
+
+/* HDCP2.2 Msg IDs */
+#define HDCP_2_2_NULL_MSG 1
+#define HDCP_2_2_AKE_INIT 2
+#define HDCP_2_2_AKE_SEND_CERT 3
+#define HDCP_2_2_AKE_NO_STORED_KM 4
+#define HDCP_2_2_AKE_STORED_KM 5
+#define HDCP_2_2_AKE_SEND_HPRIME 7
+#define HDCP_2_2_AKE_SEND_PAIRING_INFO 8
+#define HDCP_2_2_LC_INIT 9
+#define HDCP_2_2_LC_SEND_LPRIME 10
+#define HDCP_2_2_SKE_SEND_EKS 11
+#define HDCP_2_2_REP_SEND_RECVID_LIST 12
+#define HDCP_2_2_REP_SEND_ACK 15
+#define HDCP_2_2_REP_STREAM_MANAGE 16
+#define HDCP_2_2_REP_STREAM_READY 17
+
+#define HDCP_2_2_RTX_LEN 8
+#define HDCP_2_2_RRX_LEN 8
+
+#define HDCP_2_2_K_PUB_RX_MOD_N_LEN 128
+#define HDCP_2_2_K_PUB_RX_EXP_E_LEN 3
+#define HDCP_2_2_K_PUB_RX_LEN (HDCP_2_2_K_PUB_RX_MOD_N_LEN + \
+ HDCP_2_2_K_PUB_RX_EXP_E_LEN)
+
+#define HDCP_2_2_DCP_LLC_SIG_LEN 384
+
+#define HDCP_2_2_E_KPUB_KM_LEN 128
+#define HDCP_2_2_E_KH_KM_M_LEN (16 + 16)
+#define HDCP_2_2_H_PRIME_LEN 32
+#define HDCP_2_2_E_KH_KM_LEN 16
+#define HDCP_2_2_RN_LEN 8
+#define HDCP_2_2_L_PRIME_LEN 32
+#define HDCP_2_2_E_DKEY_KS_LEN 16
+#define HDCP_2_2_RIV_LEN 8
+#define HDCP_2_2_SEQ_NUM_LEN 3
+#define HDCP_2_2_V_PRIME_HALF_LEN (HDCP_2_2_L_PRIME_LEN / 2)
+#define HDCP_2_2_RECEIVER_ID_LEN DRM_HDCP_KSV_LEN
+#define HDCP_2_2_MAX_DEVICE_COUNT 31
+#define HDCP_2_2_RECEIVER_IDS_MAX_LEN (HDCP_2_2_RECEIVER_ID_LEN * \
+ HDCP_2_2_MAX_DEVICE_COUNT)
+#define HDCP_2_2_MPRIME_LEN 32
+
+/* Following Macros take a byte at a time for bit(s) masking */
+/*
+ * TODO: HDCP_2_2_MAX_CONTENT_STREAMS_CNT is based upon actual
+ * H/W MST streams capacity.
+ * This required to be moved out to platform specific header.
+ */
+#define HDCP_2_2_MAX_CONTENT_STREAMS_CNT 4
+#define HDCP_2_2_TXCAP_MASK_LEN 2
+#define HDCP_2_2_RXCAPS_LEN 3
+#define HDCP_2_2_RX_REPEATER(x) ((x) & BIT(0))
+#define HDCP_2_2_DP_HDCP_CAPABLE(x) ((x) & BIT(1))
+#define HDCP_2_2_RXINFO_LEN 2
+
+/* HDCP1.x compliant device in downstream */
+#define HDCP_2_2_HDCP1_DEVICE_CONNECTED(x) ((x) & BIT(0))
+
+/* HDCP2.0 Compliant repeater in downstream */
+#define HDCP_2_2_HDCP_2_0_REP_CONNECTED(x) ((x) & BIT(1))
+#define HDCP_2_2_MAX_CASCADE_EXCEEDED(x) ((x) & BIT(2))
+#define HDCP_2_2_MAX_DEVS_EXCEEDED(x) ((x) & BIT(3))
+#define HDCP_2_2_DEV_COUNT_LO(x) (((x) & (0xF << 4)) >> 4)
+#define HDCP_2_2_DEV_COUNT_HI(x) ((x) & BIT(0))
+#define HDCP_2_2_DEPTH(x) (((x) & (0x7 << 1)) >> 1)
+
+struct hdcp2_cert_rx {
+ u8 receiver_id[HDCP_2_2_RECEIVER_ID_LEN];
+ u8 kpub_rx[HDCP_2_2_K_PUB_RX_LEN];
+ u8 reserved[2];
+ u8 dcp_signature[HDCP_2_2_DCP_LLC_SIG_LEN];
+} __packed;
+
+struct hdcp2_streamid_type {
+ u8 stream_id;
+ u8 stream_type;
+} __packed;
+
+/*
+ * The TxCaps field specified in the HDCP HDMI, DP specs
+ * This field is big endian as specified in the errata.
+ */
+struct hdcp2_tx_caps {
+ /* Transmitter must set this to 0x2 */
+ u8 version;
+
+ /* Reserved for HDCP and DP Spec. Read as Zero */
+ u8 tx_cap_mask[HDCP_2_2_TXCAP_MASK_LEN];
+} __packed;
+
+/* Main structures for HDCP2.2 protocol communication */
+struct hdcp2_ake_init {
+ u8 msg_id;
+ u8 r_tx[HDCP_2_2_RTX_LEN];
+ struct hdcp2_tx_caps tx_caps;
+} __packed;
+
+struct hdcp2_ake_send_cert {
+ u8 msg_id;
+ struct hdcp2_cert_rx cert_rx;
+ u8 r_rx[HDCP_2_2_RRX_LEN];
+ u8 rx_caps[HDCP_2_2_RXCAPS_LEN];
+} __packed;
+
+struct hdcp2_ake_no_stored_km {
+ u8 msg_id;
+ u8 e_kpub_km[HDCP_2_2_E_KPUB_KM_LEN];
+} __packed;
+
+struct hdcp2_ake_stored_km {
+ u8 msg_id;
+ u8 e_kh_km_m[HDCP_2_2_E_KH_KM_M_LEN];
+} __packed;
+
+struct hdcp2_ake_send_hprime {
+ u8 msg_id;
+ u8 h_prime[HDCP_2_2_H_PRIME_LEN];
+} __packed;
+
+struct hdcp2_ake_send_pairing_info {
+ u8 msg_id;
+ u8 e_kh_km[HDCP_2_2_E_KH_KM_LEN];
+} __packed;
+
+struct hdcp2_lc_init {
+ u8 msg_id;
+ u8 r_n[HDCP_2_2_RN_LEN];
+} __packed;
+
+struct hdcp2_lc_send_lprime {
+ u8 msg_id;
+ u8 l_prime[HDCP_2_2_L_PRIME_LEN];
+} __packed;
+
+struct hdcp2_ske_send_eks {
+ u8 msg_id;
+ u8 e_dkey_ks[HDCP_2_2_E_DKEY_KS_LEN];
+ u8 riv[HDCP_2_2_RIV_LEN];
+} __packed;
+
+struct hdcp2_rep_send_receiverid_list {
+ u8 msg_id;
+ u8 rx_info[HDCP_2_2_RXINFO_LEN];
+ u8 seq_num_v[HDCP_2_2_SEQ_NUM_LEN];
+ u8 v_prime[HDCP_2_2_V_PRIME_HALF_LEN];
+ u8 receiver_ids[HDCP_2_2_RECEIVER_IDS_MAX_LEN];
+} __packed;
+
+struct hdcp2_rep_send_ack {
+ u8 msg_id;
+ u8 v[HDCP_2_2_V_PRIME_HALF_LEN];
+} __packed;
+
+struct hdcp2_rep_stream_manage {
+ u8 msg_id;
+ u8 seq_num_m[HDCP_2_2_SEQ_NUM_LEN];
+ __be16 k;
+ struct hdcp2_streamid_type streams[HDCP_2_2_MAX_CONTENT_STREAMS_CNT];
+} __packed;
+
+struct hdcp2_rep_stream_ready {
+ u8 msg_id;
+ u8 m_prime[HDCP_2_2_MPRIME_LEN];
+} __packed;
+
+/* HDCP2.2 TIMEOUTs in mSec */
+#define HDCP_2_2_CERT_TIMEOUT_MS 100
+#define HDCP_2_2_DP_CERT_READ_TIMEOUT_MS 110
+#define HDCP_2_2_HPRIME_NO_PAIRED_TIMEOUT_MS 1000
+#define HDCP_2_2_HPRIME_PAIRED_TIMEOUT_MS 200
+#define HDCP_2_2_DP_HPRIME_READ_TIMEOUT_MS 7
+#define HDCP_2_2_PAIRING_TIMEOUT_MS 200
+#define HDCP_2_2_DP_PAIRING_READ_TIMEOUT_MS 5
+#define HDCP_2_2_HDMI_LPRIME_TIMEOUT_MS 20
+#define HDCP_2_2_DP_LPRIME_TIMEOUT_MS 16
+#define HDCP_2_2_RECVID_LIST_TIMEOUT_MS 3000
+#define HDCP_2_2_STREAM_READY_TIMEOUT_MS 100
+
+/* HDMI HDCP2.2 Register Offsets */
+#define HDCP_2_2_HDMI_REG_VER_OFFSET 0x50
+#define HDCP_2_2_HDMI_REG_WR_MSG_OFFSET 0x60
+#define HDCP_2_2_HDMI_REG_RXSTATUS_OFFSET 0x70
+#define HDCP_2_2_HDMI_REG_RD_MSG_OFFSET 0x80
+#define HDCP_2_2_HDMI_REG_DBG_OFFSET 0xC0
+
+#define HDCP_2_2_HDMI_SUPPORT_MASK BIT(2)
+#define HDCP_2_2_RX_CAPS_VERSION_VAL 0x02
+#define HDCP_2_2_SEQ_NUM_MAX 0xFFFFFF
+#define HDCP_2_2_DELAY_BEFORE_ENCRYPTION_EN 200
+
+/* Below macros take a byte at a time and mask the bit(s) */
+#define HDCP_2_2_HDMI_RXSTATUS_LEN 2
+#define HDCP_2_2_HDMI_RXSTATUS_MSG_SZ_HI(x) ((x) & 0x3)
+#define HDCP_2_2_HDMI_RXSTATUS_READY(x) ((x) & BIT(2))
+#define HDCP_2_2_HDMI_RXSTATUS_REAUTH_REQ(x) ((x) & BIT(3))
+
+/*
+ * Helper functions to convert 24bit big endian hdcp sequence number to
+ * host format and back
+ */
+static inline
+u32 drm_hdcp_be24_to_cpu(const u8 seq_num[HDCP_2_2_SEQ_NUM_LEN])
+{
+ return (u32)(seq_num[2] | seq_num[1] << 8 | seq_num[0] << 16);
+}
+
+static inline
+void drm_hdcp_cpu_to_be24(u8 seq_num[HDCP_2_2_SEQ_NUM_LEN], u32 val)
+{
+ seq_num[0] = val >> 16;
+ seq_num[1] = val >> 8;
+ seq_num[2] = val;
+}
+
+#define DRM_HDCP_SRM_GEN1_MAX_BYTES (5 * 1024)
+#define DRM_HDCP_1_4_SRM_ID 0x8
+#define DRM_HDCP_SRM_ID_MASK (0xF << 4)
+#define DRM_HDCP_1_4_VRL_LENGTH_SIZE 3
+#define DRM_HDCP_1_4_DCP_SIG_SIZE 40
+#define DRM_HDCP_2_SRM_ID 0x9
+#define DRM_HDCP_2_INDICATOR 0x1
+#define DRM_HDCP_2_INDICATOR_MASK 0xF
+#define DRM_HDCP_2_VRL_LENGTH_SIZE 3
+#define DRM_HDCP_2_DCP_SIG_SIZE 384
+#define DRM_HDCP_2_NO_OF_DEV_PLUS_RESERVED_SZ 4
+#define DRM_HDCP_2_KSV_COUNT_2_LSBITS(byte) (((byte) & 0xC0) >> 6)
+
+struct hdcp_srm_header {
+ u8 srm_id;
+ u8 reserved;
+ __be16 srm_version;
+ u8 srm_gen_no;
+} __packed;
+
+/* Content Type classification for HDCP2.2 vs others */
+#define DRM_MODE_HDCP_CONTENT_TYPE0 0
+#define DRM_MODE_HDCP_CONTENT_TYPE1 1
+
+#endif
diff --git a/include/drm/display/drm_hdcp_helper.h b/include/drm/display/drm_hdcp_helper.h
new file mode 100644
index 000000000..8aaf87bf2
--- /dev/null
+++ b/include/drm/display/drm_hdcp_helper.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright (C) 2017 Google, Inc.
+ *
+ * Authors:
+ * Sean Paul <seanpaul@chromium.org>
+ */
+
+#ifndef _DRM_HDCP_HELPER_H_INCLUDED_
+#define _DRM_HDCP_HELPER_H_INCLUDED_
+
+#include <drm/display/drm_hdcp.h>
+
+struct drm_device;
+struct drm_connector;
+
+int drm_hdcp_check_ksvs_revoked(struct drm_device *dev, u8 *ksvs, u32 ksv_count);
+int drm_connector_attach_content_protection_property(struct drm_connector *connector,
+ bool hdcp_content_type);
+void drm_hdcp_update_content_protection(struct drm_connector *connector, u64 val);
+
+#endif
diff --git a/include/drm/display/drm_hdmi_helper.h b/include/drm/display/drm_hdmi_helper.h
new file mode 100644
index 000000000..76d234826
--- /dev/null
+++ b/include/drm/display/drm_hdmi_helper.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: MIT */
+
+#ifndef DRM_HDMI_HELPER
+#define DRM_HDMI_HELPER
+
+#include <linux/hdmi.h>
+
+struct drm_connector;
+struct drm_connector_state;
+struct drm_display_mode;
+
+void
+drm_hdmi_avi_infoframe_colorimetry(struct hdmi_avi_infoframe *frame,
+ const struct drm_connector_state *conn_state);
+
+void
+drm_hdmi_avi_infoframe_bars(struct hdmi_avi_infoframe *frame,
+ const struct drm_connector_state *conn_state);
+
+int
+drm_hdmi_infoframe_set_hdr_metadata(struct hdmi_drm_infoframe *frame,
+ const struct drm_connector_state *conn_state);
+
+void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame,
+ const struct drm_connector_state *conn_state);
+
+#endif
diff --git a/include/drm/display/drm_scdc.h b/include/drm/display/drm_scdc.h
new file mode 100644
index 000000000..3d58f37e8
--- /dev/null
+++ b/include/drm/display/drm_scdc.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright (c) 2015 NVIDIA Corporation. All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef DRM_SCDC_H
+#define DRM_SCDC_H
+
+#define SCDC_SINK_VERSION 0x01
+
+#define SCDC_SOURCE_VERSION 0x02
+
+#define SCDC_UPDATE_0 0x10
+#define SCDC_READ_REQUEST_TEST (1 << 2)
+#define SCDC_CED_UPDATE (1 << 1)
+#define SCDC_STATUS_UPDATE (1 << 0)
+
+#define SCDC_UPDATE_1 0x11
+
+#define SCDC_TMDS_CONFIG 0x20
+#define SCDC_TMDS_BIT_CLOCK_RATIO_BY_40 (1 << 1)
+#define SCDC_TMDS_BIT_CLOCK_RATIO_BY_10 (0 << 1)
+#define SCDC_SCRAMBLING_ENABLE (1 << 0)
+
+#define SCDC_SCRAMBLER_STATUS 0x21
+#define SCDC_SCRAMBLING_STATUS (1 << 0)
+
+#define SCDC_CONFIG_0 0x30
+#define SCDC_READ_REQUEST_ENABLE (1 << 0)
+
+#define SCDC_STATUS_FLAGS_0 0x40
+#define SCDC_CH2_LOCK (1 << 3)
+#define SCDC_CH1_LOCK (1 << 2)
+#define SCDC_CH0_LOCK (1 << 1)
+#define SCDC_CH_LOCK_MASK (SCDC_CH2_LOCK | SCDC_CH1_LOCK | SCDC_CH0_LOCK)
+#define SCDC_CLOCK_DETECT (1 << 0)
+
+#define SCDC_STATUS_FLAGS_1 0x41
+
+#define SCDC_ERR_DET_0_L 0x50
+#define SCDC_ERR_DET_0_H 0x51
+#define SCDC_ERR_DET_1_L 0x52
+#define SCDC_ERR_DET_1_H 0x53
+#define SCDC_ERR_DET_2_L 0x54
+#define SCDC_ERR_DET_2_H 0x55
+#define SCDC_CHANNEL_VALID (1 << 7)
+
+#define SCDC_ERR_DET_CHECKSUM 0x56
+
+#define SCDC_TEST_CONFIG_0 0xc0
+#define SCDC_TEST_READ_REQUEST (1 << 7)
+#define SCDC_TEST_READ_REQUEST_DELAY(x) ((x) & 0x7f)
+
+#define SCDC_MANUFACTURER_IEEE_OUI 0xd0
+#define SCDC_MANUFACTURER_IEEE_OUI_SIZE 3
+
+#define SCDC_DEVICE_ID 0xd3
+#define SCDC_DEVICE_ID_SIZE 8
+
+#define SCDC_DEVICE_HARDWARE_REVISION 0xdb
+#define SCDC_GET_DEVICE_HARDWARE_REVISION_MAJOR(x) (((x) >> 4) & 0xf)
+#define SCDC_GET_DEVICE_HARDWARE_REVISION_MINOR(x) (((x) >> 0) & 0xf)
+
+#define SCDC_DEVICE_SOFTWARE_MAJOR_REVISION 0xdc
+#define SCDC_DEVICE_SOFTWARE_MINOR_REVISION 0xdd
+
+#define SCDC_MANUFACTURER_SPECIFIC 0xde
+#define SCDC_MANUFACTURER_SPECIFIC_SIZE 34
+
+#endif
diff --git a/include/drm/display/drm_scdc_helper.h b/include/drm/display/drm_scdc_helper.h
new file mode 100644
index 000000000..ded01fd94
--- /dev/null
+++ b/include/drm/display/drm_scdc_helper.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (c) 2015 NVIDIA Corporation. All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef DRM_SCDC_HELPER_H
+#define DRM_SCDC_HELPER_H
+
+#include <linux/types.h>
+
+#include <drm/display/drm_scdc.h>
+
+struct i2c_adapter;
+
+ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer,
+ size_t size);
+ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset,
+ const void *buffer, size_t size);
+
+/**
+ * drm_scdc_readb - read a single byte from SCDC
+ * @adapter: I2C adapter
+ * @offset: offset of register to read
+ * @value: return location for the register value
+ *
+ * Reads a single byte from SCDC. This is a convenience wrapper around the
+ * drm_scdc_read() function.
+ *
+ * Returns:
+ * 0 on success or a negative error code on failure.
+ */
+static inline int drm_scdc_readb(struct i2c_adapter *adapter, u8 offset,
+ u8 *value)
+{
+ return drm_scdc_read(adapter, offset, value, sizeof(*value));
+}
+
+/**
+ * drm_scdc_writeb - write a single byte to SCDC
+ * @adapter: I2C adapter
+ * @offset: offset of register to read
+ * @value: return location for the register value
+ *
+ * Writes a single byte to SCDC. This is a convenience wrapper around the
+ * drm_scdc_write() function.
+ *
+ * Returns:
+ * 0 on success or a negative error code on failure.
+ */
+static inline int drm_scdc_writeb(struct i2c_adapter *adapter, u8 offset,
+ u8 value)
+{
+ return drm_scdc_write(adapter, offset, &value, sizeof(value));
+}
+
+bool drm_scdc_get_scrambling_status(struct i2c_adapter *adapter);
+
+bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable);
+bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set);
+
+#endif
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 04:06:37 +0000