diff options
Diffstat (limited to 'include/drm/drm_simple_kms_helper.h')
| -rw-r--r-- | include/drm/drm_simple_kms_helper.h | 269 |
1 files changed, 269 insertions, 0 deletions
diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h new file mode 100644 index 000000000..0b3647e61 --- /dev/null +++ b/include/drm/drm_simple_kms_helper.h @@ -0,0 +1,269 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2016 Noralf Trønnes + */ + +#ifndef __LINUX_DRM_SIMPLE_KMS_HELPER_H +#define __LINUX_DRM_SIMPLE_KMS_HELPER_H + +#include <drm/drm_crtc.h> +#include <drm/drm_encoder.h> +#include <drm/drm_plane.h> + +struct drm_simple_display_pipe; + +/** + * struct drm_simple_display_pipe_funcs - helper operations for a simple + * display pipeline + */ +struct drm_simple_display_pipe_funcs { + /** + * @mode_valid: + * + * This callback is used to check if a specific mode is valid in the + * crtc used in this simple display pipe. This should be implemented + * if the display pipe has some sort of restriction in the modes + * it can display. For example, a given display pipe may be responsible + * to set a clock value. If the clock can not produce all the values + * for the available modes then this callback can be used to restrict + * the number of modes to only the ones that can be displayed. Another + * reason can be bandwidth mitigation: the memory port on the display + * controller can have bandwidth limitations not allowing pixel data + * to be fetched at any rate. + * + * This hook is used by the probe helpers to filter the mode list in + * drm_helper_probe_single_connector_modes(), and it is used by the + * atomic helpers to validate modes supplied by userspace in + * drm_atomic_helper_check_modeset(). + * + * This function is optional. + * + * NOTE: + * + * Since this function is both called from the check phase of an atomic + * commit, and the mode validation in the probe paths it is not allowed + * to look at anything else but the passed-in mode, and validate it + * against configuration-invariant hardware constraints. + * + * RETURNS: + * + * drm_mode_status Enum + */ + enum drm_mode_status (*mode_valid)(struct drm_simple_display_pipe *pipe, + const struct drm_display_mode *mode); + + /** + * @enable: + * + * This function should be used to enable the pipeline. + * It is called when the underlying crtc is enabled. + * This hook is optional. + */ + void (*enable)(struct drm_simple_display_pipe *pipe, + struct drm_crtc_state *crtc_state, + struct drm_plane_state *plane_state); + /** + * @disable: + * + * This function should be used to disable the pipeline. + * It is called when the underlying crtc is disabled. + * This hook is optional. + */ + void (*disable)(struct drm_simple_display_pipe *pipe); + + /** + * @check: + * + * This function is called in the check phase of an atomic update, + * specifically when the underlying plane is checked. + * The simple display pipeline helpers already check that the plane is + * not scaled, fills the entire visible area and is always enabled + * when the crtc is also enabled. + * This hook is optional. + * + * RETURNS: + * + * 0 on success, -EINVAL if the state or the transition can't be + * supported, -ENOMEM on memory allocation failure and -EDEADLK if an + * attempt to obtain another state object ran into a &drm_modeset_lock + * deadlock. + */ + int (*check)(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *plane_state, + struct drm_crtc_state *crtc_state); + /** + * @update: + * + * This function is called when the underlying plane state is updated. + * This hook is optional. + * + * This is the function drivers should submit the + * &drm_pending_vblank_event from. Using either + * drm_crtc_arm_vblank_event(), when the driver supports vblank + * interrupt handling, or drm_crtc_send_vblank_event() for more + * complex case. In case the hardware lacks vblank support entirely, + * drivers can set &struct drm_crtc_state.no_vblank in + * &struct drm_simple_display_pipe_funcs.check and let DRM's + * atomic helper fake a vblank event. + */ + void (*update)(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *old_plane_state); + + /** + * @prepare_fb: + * + * Optional, called by &drm_plane_helper_funcs.prepare_fb. Please read + * the documentation for the &drm_plane_helper_funcs.prepare_fb hook for + * more details. + * + * For GEM drivers who neither have a @prepare_fb nor @cleanup_fb hook + * set drm_gem_simple_display_pipe_prepare_fb() is called automatically + * to implement this. Other drivers which need additional plane + * processing can call drm_gem_simple_display_pipe_prepare_fb() from + * their @prepare_fb hook. + */ + int (*prepare_fb)(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *plane_state); + + /** + * @cleanup_fb: + * + * Optional, called by &drm_plane_helper_funcs.cleanup_fb. Please read + * the documentation for the &drm_plane_helper_funcs.cleanup_fb hook for + * more details. + */ + void (*cleanup_fb)(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *plane_state); + + /** + * @enable_vblank: + * + * Optional, called by &drm_crtc_funcs.enable_vblank. Please read + * the documentation for the &drm_crtc_funcs.enable_vblank hook for + * more details. + */ + int (*enable_vblank)(struct drm_simple_display_pipe *pipe); + + /** + * @disable_vblank: + * + * Optional, called by &drm_crtc_funcs.disable_vblank. Please read + * the documentation for the &drm_crtc_funcs.disable_vblank hook for + * more details. + */ + void (*disable_vblank)(struct drm_simple_display_pipe *pipe); + + /** + * @reset_crtc: + * + * Optional, called by &drm_crtc_funcs.reset. Please read the + * documentation for the &drm_crtc_funcs.reset hook for more details. + */ + void (*reset_crtc)(struct drm_simple_display_pipe *pipe); + + /** + * @duplicate_crtc_state: + * + * Optional, called by &drm_crtc_funcs.atomic_duplicate_state. Please + * read the documentation for the &drm_crtc_funcs.atomic_duplicate_state + * hook for more details. + */ + struct drm_crtc_state * (*duplicate_crtc_state)(struct drm_simple_display_pipe *pipe); + + /** + * @destroy_crtc_state: + * + * Optional, called by &drm_crtc_funcs.atomic_destroy_state. Please + * read the documentation for the &drm_crtc_funcs.atomic_destroy_state + * hook for more details. + */ + void (*destroy_crtc_state)(struct drm_simple_display_pipe *pipe, + struct drm_crtc_state *crtc_state); + + /** + * @reset_plane: + * + * Optional, called by &drm_plane_funcs.reset. Please read the + * documentation for the &drm_plane_funcs.reset hook for more details. + */ + void (*reset_plane)(struct drm_simple_display_pipe *pipe); + + /** + * @duplicate_plane_state: + * + * Optional, called by &drm_plane_funcs.atomic_duplicate_state. Please + * read the documentation for the &drm_plane_funcs.atomic_duplicate_state + * hook for more details. + */ + struct drm_plane_state * (*duplicate_plane_state)(struct drm_simple_display_pipe *pipe); + + /** + * @destroy_plane_state: + * + * Optional, called by &drm_plane_funcs.atomic_destroy_state. Please + * read the documentation for the &drm_plane_funcs.atomic_destroy_state + * hook for more details. + */ + void (*destroy_plane_state)(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *plane_state); +}; + +/** + * struct drm_simple_display_pipe - simple display pipeline + * @crtc: CRTC control structure + * @plane: Plane control structure + * @encoder: Encoder control structure + * @connector: Connector control structure + * @funcs: Pipeline control functions (optional) + * + * Simple display pipeline with plane, crtc and encoder collapsed into one + * entity. It should be initialized by calling drm_simple_display_pipe_init(). + */ +struct drm_simple_display_pipe { + struct drm_crtc crtc; + struct drm_plane plane; + struct drm_encoder encoder; + struct drm_connector *connector; + + const struct drm_simple_display_pipe_funcs *funcs; +}; + +int drm_simple_display_pipe_attach_bridge(struct drm_simple_display_pipe *pipe, + struct drm_bridge *bridge); + +int drm_simple_display_pipe_init(struct drm_device *dev, + struct drm_simple_display_pipe *pipe, + const struct drm_simple_display_pipe_funcs *funcs, + const uint32_t *formats, unsigned int format_count, + const uint64_t *format_modifiers, + struct drm_connector *connector); + +int drm_simple_encoder_init(struct drm_device *dev, + struct drm_encoder *encoder, + int encoder_type); + +void *__drmm_simple_encoder_alloc(struct drm_device *dev, size_t size, + size_t offset, int encoder_type); + +/** + * drmm_simple_encoder_alloc - Allocate and initialize an encoder with basic + * functionality. + * @dev: drm device + * @type: the type of the struct which contains struct &drm_encoder + * @member: the name of the &drm_encoder within @type. + * @encoder_type: user visible type of the encoder + * + * Allocates and initializes an encoder that has no further functionality. + * Settings for possible CRTC and clones are left to their initial values. + * Cleanup is automatically handled through registering drm_encoder_cleanup() + * with drmm_add_action(). + * + * Returns: + * Pointer to new encoder, or ERR_PTR on failure. + */ +#define drmm_simple_encoder_alloc(dev, type, member, encoder_type) \ + ((type *)__drmm_simple_encoder_alloc(dev, sizeof(type), \ + offsetof(type, member), \ + encoder_type)) + +#endif /* __LINUX_DRM_SIMPLE_KMS_HELPER_H */ |