summaryrefslogtreecommitdiffstats
path: root/include/media/drv-intf/cx25840.h
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--include/media/drv-intf/cx25840.h262
1 files changed, 262 insertions, 0 deletions
diff --git a/include/media/drv-intf/cx25840.h b/include/media/drv-intf/cx25840.h
new file mode 100644
index 000000000..ba69bc525
--- /dev/null
+++ b/include/media/drv-intf/cx25840.h
@@ -0,0 +1,262 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/*
+ * cx25840.h - definition for cx25840/1/2/3 inputs
+ *
+ * Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+ */
+
+#ifndef _CX25840_H_
+#define _CX25840_H_
+
+/*
+ * Note that the cx25840 driver requires that the bridge driver calls the
+ * v4l2_subdev's load_fw operation in order to load the driver's firmware.
+ * This will load the firmware on the first invocation (further ones are NOP).
+ * Without this the audio standard detection will fail and you will
+ * only get mono.
+ * Alternatively, you can call the reset operation (this can be done
+ * multiple times if needed, each invocation will fully reinitialize
+ * the device).
+ *
+ * Since loading the firmware is often problematic when the driver is
+ * compiled into the kernel I recommend postponing calling this function
+ * until the first open of the video device. Another reason for
+ * postponing it is that loading this firmware takes a long time (seconds)
+ * due to the slow i2c bus speed. So it will speed up the boot process if
+ * you can avoid loading the fw as long as the video device isn't used.
+ */
+
+enum cx25840_video_input {
+ /* Composite video inputs In1-In8 */
+ CX25840_COMPOSITE1 = 1,
+ CX25840_COMPOSITE2,
+ CX25840_COMPOSITE3,
+ CX25840_COMPOSITE4,
+ CX25840_COMPOSITE5,
+ CX25840_COMPOSITE6,
+ CX25840_COMPOSITE7,
+ CX25840_COMPOSITE8,
+
+ /*
+ * S-Video inputs consist of one luma input (In1-In8) ORed with one
+ * chroma input (In5-In8)
+ */
+ CX25840_SVIDEO_LUMA1 = 0x10,
+ CX25840_SVIDEO_LUMA2 = 0x20,
+ CX25840_SVIDEO_LUMA3 = 0x30,
+ CX25840_SVIDEO_LUMA4 = 0x40,
+ CX25840_SVIDEO_LUMA5 = 0x50,
+ CX25840_SVIDEO_LUMA6 = 0x60,
+ CX25840_SVIDEO_LUMA7 = 0x70,
+ CX25840_SVIDEO_LUMA8 = 0x80,
+ CX25840_SVIDEO_CHROMA4 = 0x400,
+ CX25840_SVIDEO_CHROMA5 = 0x500,
+ CX25840_SVIDEO_CHROMA6 = 0x600,
+ CX25840_SVIDEO_CHROMA7 = 0x700,
+ CX25840_SVIDEO_CHROMA8 = 0x800,
+
+ /* S-Video aliases for common luma/chroma combinations */
+ CX25840_SVIDEO1 = 0x510,
+ CX25840_SVIDEO2 = 0x620,
+ CX25840_SVIDEO3 = 0x730,
+ CX25840_SVIDEO4 = 0x840,
+
+ /* Allow frames to specify specific input configurations */
+ CX25840_VIN1_CH1 = 0x80000000,
+ CX25840_VIN2_CH1 = 0x80000001,
+ CX25840_VIN3_CH1 = 0x80000002,
+ CX25840_VIN4_CH1 = 0x80000003,
+ CX25840_VIN5_CH1 = 0x80000004,
+ CX25840_VIN6_CH1 = 0x80000005,
+ CX25840_VIN7_CH1 = 0x80000006,
+ CX25840_VIN8_CH1 = 0x80000007,
+ CX25840_VIN4_CH2 = 0x80000000,
+ CX25840_VIN5_CH2 = 0x80000010,
+ CX25840_VIN6_CH2 = 0x80000020,
+ CX25840_NONE_CH2 = 0x80000030,
+ CX25840_VIN7_CH3 = 0x80000000,
+ CX25840_VIN8_CH3 = 0x80000040,
+ CX25840_NONE0_CH3 = 0x80000080,
+ CX25840_NONE1_CH3 = 0x800000c0,
+ CX25840_SVIDEO_ON = 0x80000100,
+ CX25840_COMPONENT_ON = 0x80000200,
+ CX25840_DIF_ON = 0x80000400,
+};
+
+/*
+ * The defines below are used to set the chip video output settings
+ * in the generic mode that can be enabled by calling the subdevice
+ * init core op.
+ *
+ * The requested settings can be passed to the init core op as
+ * @val parameter and to the s_routing video op as @config parameter.
+ *
+ * For details please refer to the section 3.7 Video Output Formatting and
+ * to Video Out Control 1 to 4 registers in the section 5.6 Video Decoder Core
+ * of the chip datasheet.
+ */
+#define CX25840_VCONFIG_FMT_SHIFT 0
+#define CX25840_VCONFIG_FMT_MASK GENMASK(2, 0)
+#define CX25840_VCONFIG_FMT_BT601 BIT(0)
+#define CX25840_VCONFIG_FMT_BT656 BIT(1)
+#define CX25840_VCONFIG_FMT_VIP11 GENMASK(1, 0)
+#define CX25840_VCONFIG_FMT_VIP2 BIT(2)
+
+#define CX25840_VCONFIG_RES_SHIFT 3
+#define CX25840_VCONFIG_RES_MASK GENMASK(4, 3)
+#define CX25840_VCONFIG_RES_8BIT BIT(3)
+#define CX25840_VCONFIG_RES_10BIT BIT(4)
+
+#define CX25840_VCONFIG_VBIRAW_SHIFT 5
+#define CX25840_VCONFIG_VBIRAW_MASK GENMASK(6, 5)
+#define CX25840_VCONFIG_VBIRAW_DISABLED BIT(5)
+#define CX25840_VCONFIG_VBIRAW_ENABLED BIT(6)
+
+#define CX25840_VCONFIG_ANCDATA_SHIFT 7
+#define CX25840_VCONFIG_ANCDATA_MASK GENMASK(8, 7)
+#define CX25840_VCONFIG_ANCDATA_DISABLED BIT(7)
+#define CX25840_VCONFIG_ANCDATA_ENABLED BIT(8)
+
+#define CX25840_VCONFIG_TASKBIT_SHIFT 9
+#define CX25840_VCONFIG_TASKBIT_MASK GENMASK(10, 9)
+#define CX25840_VCONFIG_TASKBIT_ZERO BIT(9)
+#define CX25840_VCONFIG_TASKBIT_ONE BIT(10)
+
+#define CX25840_VCONFIG_ACTIVE_SHIFT 11
+#define CX25840_VCONFIG_ACTIVE_MASK GENMASK(12, 11)
+#define CX25840_VCONFIG_ACTIVE_COMPOSITE BIT(11)
+#define CX25840_VCONFIG_ACTIVE_HORIZONTAL BIT(12)
+
+#define CX25840_VCONFIG_VALID_SHIFT 13
+#define CX25840_VCONFIG_VALID_MASK GENMASK(14, 13)
+#define CX25840_VCONFIG_VALID_NORMAL BIT(13)
+#define CX25840_VCONFIG_VALID_ANDACTIVE BIT(14)
+
+#define CX25840_VCONFIG_HRESETW_SHIFT 15
+#define CX25840_VCONFIG_HRESETW_MASK GENMASK(16, 15)
+#define CX25840_VCONFIG_HRESETW_NORMAL BIT(15)
+#define CX25840_VCONFIG_HRESETW_PIXCLK BIT(16)
+
+#define CX25840_VCONFIG_CLKGATE_SHIFT 17
+#define CX25840_VCONFIG_CLKGATE_MASK GENMASK(18, 17)
+#define CX25840_VCONFIG_CLKGATE_NONE BIT(17)
+#define CX25840_VCONFIG_CLKGATE_VALID BIT(18)
+#define CX25840_VCONFIG_CLKGATE_VALIDACTIVE GENMASK(18, 17)
+
+#define CX25840_VCONFIG_DCMODE_SHIFT 19
+#define CX25840_VCONFIG_DCMODE_MASK GENMASK(20, 19)
+#define CX25840_VCONFIG_DCMODE_DWORDS BIT(19)
+#define CX25840_VCONFIG_DCMODE_BYTES BIT(20)
+
+#define CX25840_VCONFIG_IDID0S_SHIFT 21
+#define CX25840_VCONFIG_IDID0S_MASK GENMASK(22, 21)
+#define CX25840_VCONFIG_IDID0S_NORMAL BIT(21)
+#define CX25840_VCONFIG_IDID0S_LINECNT BIT(22)
+
+#define CX25840_VCONFIG_VIPCLAMP_SHIFT 23
+#define CX25840_VCONFIG_VIPCLAMP_MASK GENMASK(24, 23)
+#define CX25840_VCONFIG_VIPCLAMP_ENABLED BIT(23)
+#define CX25840_VCONFIG_VIPCLAMP_DISABLED BIT(24)
+
+enum cx25840_audio_input {
+ /* Audio inputs: serial or In4-In8 */
+ CX25840_AUDIO_SERIAL,
+ CX25840_AUDIO4 = 4,
+ CX25840_AUDIO5,
+ CX25840_AUDIO6,
+ CX25840_AUDIO7,
+ CX25840_AUDIO8,
+};
+
+enum cx25840_io_pin {
+ CX25840_PIN_DVALID_PRGM0 = 0,
+ CX25840_PIN_FIELD_PRGM1,
+ CX25840_PIN_HRESET_PRGM2,
+ CX25840_PIN_VRESET_HCTL_PRGM3,
+ CX25840_PIN_IRQ_N_PRGM4,
+ CX25840_PIN_IR_TX_PRGM6,
+ CX25840_PIN_IR_RX_PRGM5,
+ CX25840_PIN_GPIO0_PRGM8,
+ CX25840_PIN_GPIO1_PRGM9,
+ CX25840_PIN_SA_SDIN, /* Alternate GP Input only */
+ CX25840_PIN_SA_SDOUT, /* Alternate GP Input only */
+ CX25840_PIN_PLL_CLK_PRGM7,
+ CX25840_PIN_CHIP_SEL_VIPCLK, /* Output only */
+};
+
+enum cx25840_io_pad {
+ /* Output pads, these must match the actual chip register values */
+ CX25840_PAD_DEFAULT = 0,
+ CX25840_PAD_ACTIVE,
+ CX25840_PAD_VACTIVE,
+ CX25840_PAD_CBFLAG,
+ CX25840_PAD_VID_DATA_EXT0,
+ CX25840_PAD_VID_DATA_EXT1,
+ CX25840_PAD_GPO0,
+ CX25840_PAD_GPO1,
+ CX25840_PAD_GPO2,
+ CX25840_PAD_GPO3,
+ CX25840_PAD_IRQ_N,
+ CX25840_PAD_AC_SYNC,
+ CX25840_PAD_AC_SDOUT,
+ CX25840_PAD_PLL_CLK,
+ CX25840_PAD_VRESET,
+ CX25840_PAD_RESERVED,
+ /* Pads for PLL_CLK output only */
+ CX25840_PAD_XTI_X5_DLL,
+ CX25840_PAD_AUX_PLL,
+ CX25840_PAD_VID_PLL,
+ CX25840_PAD_XTI,
+ /* Input Pads */
+ CX25840_PAD_GPI0,
+ CX25840_PAD_GPI1,
+ CX25840_PAD_GPI2,
+ CX25840_PAD_GPI3,
+};
+
+enum cx25840_io_pin_strength {
+ CX25840_PIN_DRIVE_MEDIUM = 0,
+ CX25840_PIN_DRIVE_SLOW,
+ CX25840_PIN_DRIVE_FAST,
+};
+
+enum cx23885_io_pin {
+ CX23885_PIN_IR_RX_GPIO19,
+ CX23885_PIN_IR_TX_GPIO20,
+ CX23885_PIN_I2S_SDAT_GPIO21,
+ CX23885_PIN_I2S_WCLK_GPIO22,
+ CX23885_PIN_I2S_BCLK_GPIO23,
+ CX23885_PIN_IRQ_N_GPIO16,
+};
+
+enum cx23885_io_pad {
+ CX23885_PAD_IR_RX,
+ CX23885_PAD_GPIO19,
+ CX23885_PAD_IR_TX,
+ CX23885_PAD_GPIO20,
+ CX23885_PAD_I2S_SDAT,
+ CX23885_PAD_GPIO21,
+ CX23885_PAD_I2S_WCLK,
+ CX23885_PAD_GPIO22,
+ CX23885_PAD_I2S_BCLK,
+ CX23885_PAD_GPIO23,
+ CX23885_PAD_IRQ_N,
+ CX23885_PAD_GPIO16,
+};
+
+/*
+ * pvr150_workaround activates a workaround for a hardware bug that is
+ * present in Hauppauge PVR-150 (and possibly PVR-500) cards that have
+ * certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The
+ * audio autodetect fails on some channels for these models and the workaround
+ * is to select the audio standard explicitly. Many thanks to Hauppauge for
+ * providing this information.
+ *
+ * This platform data only needs to be supplied by the ivtv driver.
+ */
+struct cx25840_platform_data {
+ int pvr150_workaround;
+};
+
+#endif