diff options
Diffstat (limited to '')
| -rw-r--r-- | include/soc/fsl/bman.h | 145 | ||||
| -rw-r--r-- | include/soc/fsl/caam-blob.h | 103 | ||||
| -rw-r--r-- | include/soc/fsl/cpm.h | 171 | ||||
| -rw-r--r-- | include/soc/fsl/dpaa2-fd.h | 681 | ||||
| -rw-r--r-- | include/soc/fsl/dpaa2-global.h | 192 | ||||
| -rw-r--r-- | include/soc/fsl/dpaa2-io.h | 141 | ||||
| -rw-r--r-- | include/soc/fsl/qe/immap_qe.h | 466 | ||||
| -rw-r--r-- | include/soc/fsl/qe/qe.h | 811 | ||||
| -rw-r--r-- | include/soc/fsl/qe/qe_tdm.h | 92 | ||||
| -rw-r--r-- | include/soc/fsl/qe/ucc.h | 64 | ||||
| -rw-r--r-- | include/soc/fsl/qe/ucc_fast.h | 266 | ||||
| -rw-r--r-- | include/soc/fsl/qe/ucc_slow.h | 272 | ||||
| -rw-r--r-- | include/soc/fsl/qman.h | 1259 |
13 files changed, 4663 insertions, 0 deletions
diff --git a/include/soc/fsl/bman.h b/include/soc/fsl/bman.h new file mode 100644 index 000000000..173e4049d --- /dev/null +++ b/include/soc/fsl/bman.h @@ -0,0 +1,145 @@ +/* Copyright 2008 - 2016 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __FSL_BMAN_H +#define __FSL_BMAN_H + +/* wrapper for 48-bit buffers */ +struct bm_buffer { + union { + struct { + __be16 bpid; /* hi 8-bits reserved */ + __be16 hi; /* High 16-bits of 48-bit address */ + __be32 lo; /* Low 32-bits of 48-bit address */ + }; + __be64 data; + }; +} __aligned(8); +/* + * Restore the 48 bit address previously stored in BMan + * hardware pools as a dma_addr_t + */ +static inline dma_addr_t bm_buf_addr(const struct bm_buffer *buf) +{ + return be64_to_cpu(buf->data) & 0xffffffffffffLLU; +} + +static inline u64 bm_buffer_get64(const struct bm_buffer *buf) +{ + return be64_to_cpu(buf->data) & 0xffffffffffffLLU; +} + +static inline void bm_buffer_set64(struct bm_buffer *buf, u64 addr) +{ + buf->hi = cpu_to_be16(upper_32_bits(addr)); + buf->lo = cpu_to_be32(lower_32_bits(addr)); +} + +static inline u8 bm_buffer_get_bpid(const struct bm_buffer *buf) +{ + return be16_to_cpu(buf->bpid) & 0xff; +} + +static inline void bm_buffer_set_bpid(struct bm_buffer *buf, int bpid) +{ + buf->bpid = cpu_to_be16(bpid & 0xff); +} + +/* Managed portal, high-level i/face */ + +/* Portal and Buffer Pools */ +struct bman_portal; +struct bman_pool; + +#define BM_POOL_MAX 64 /* max # of buffer pools */ + +/** + * bman_new_pool - Allocates a Buffer Pool object + * + * Creates a pool object, and returns a reference to it or NULL on error. + */ +struct bman_pool *bman_new_pool(void); + +/** + * bman_free_pool - Deallocates a Buffer Pool object + * @pool: the pool object to release + */ +void bman_free_pool(struct bman_pool *pool); + +/** + * bman_get_bpid - Returns a pool object's BPID. + * @pool: the pool object + * + * The returned value is the index of the encapsulated buffer pool, + * in the range of [0, @BM_POOL_MAX-1]. + */ +int bman_get_bpid(const struct bman_pool *pool); + +/** + * bman_release - Release buffer(s) to the buffer pool + * @pool: the buffer pool object to release to + * @bufs: an array of buffers to release + * @num: the number of buffers in @bufs (1-8) + * + * Adds the given buffers to RCR entries. If the RCR ring is unresponsive, + * the function will return -ETIMEDOUT. Otherwise, it returns zero. + */ +int bman_release(struct bman_pool *pool, const struct bm_buffer *bufs, u8 num); + +/** + * bman_acquire - Acquire buffer(s) from a buffer pool + * @pool: the buffer pool object to acquire from + * @bufs: array for storing the acquired buffers + * @num: the number of buffers desired (@bufs is at least this big) + * + * Issues an "Acquire" command via the portal's management command interface. + * The return value will be the number of buffers obtained from the pool, or a + * negative error code if a h/w error or pool starvation was encountered. In + * the latter case, the content of @bufs is undefined. + */ +int bman_acquire(struct bman_pool *pool, struct bm_buffer *bufs, u8 num); + +/** + * bman_is_probed - Check if bman is probed + * + * Returns 1 if the bman driver successfully probed, -1 if the bman driver + * failed to probe or 0 if the bman driver did not probed yet. + */ +int bman_is_probed(void); +/** + * bman_portals_probed - Check if all cpu bound bman portals are probed + * + * Returns 1 if all the required cpu bound bman portals successfully probed, + * -1 if probe errors appeared or 0 if the bman portals did not yet finished + * probing. + */ +int bman_portals_probed(void); + +#endif /* __FSL_BMAN_H */ diff --git a/include/soc/fsl/caam-blob.h b/include/soc/fsl/caam-blob.h new file mode 100644 index 000000000..937cac52f --- /dev/null +++ b/include/soc/fsl/caam-blob.h @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2020 Pengutronix, Ahmad Fatoum <kernel@pengutronix.de> + */ + +#ifndef __CAAM_BLOB_GEN +#define __CAAM_BLOB_GEN + +#include <linux/types.h> +#include <linux/errno.h> + +#define CAAM_BLOB_KEYMOD_LENGTH 16 +#define CAAM_BLOB_OVERHEAD (32 + 16) +#define CAAM_BLOB_MAX_LEN 4096 + +struct caam_blob_priv; + +/** + * struct caam_blob_info - information for CAAM blobbing + * @input: pointer to input buffer (must be DMAable) + * @input_len: length of @input buffer in bytes. + * @output: pointer to output buffer (must be DMAable) + * @output_len: length of @output buffer in bytes. + * @key_mod: key modifier + * @key_mod_len: length of @key_mod in bytes. + * May not exceed %CAAM_BLOB_KEYMOD_LENGTH + */ +struct caam_blob_info { + void *input; + size_t input_len; + + void *output; + size_t output_len; + + const void *key_mod; + size_t key_mod_len; +}; + +/** + * caam_blob_gen_init - initialize blob generation + * Return: pointer to new &struct caam_blob_priv instance on success + * and ``ERR_PTR(-ENODEV)`` if CAAM has no hardware blobbing support + * or no job ring could be allocated. + */ +struct caam_blob_priv *caam_blob_gen_init(void); + +/** + * caam_blob_gen_exit - free blob generation resources + * @priv: instance returned by caam_blob_gen_init() + */ +void caam_blob_gen_exit(struct caam_blob_priv *priv); + +/** + * caam_process_blob - encapsulate or decapsulate blob + * @priv: instance returned by caam_blob_gen_init() + * @info: pointer to blobbing info describing key, blob and + * key modifier buffers. + * @encap: true for encapsulation, false for decapsulation + * + * Return: %0 and sets ``info->output_len`` on success and a negative + * error code otherwise. + */ +int caam_process_blob(struct caam_blob_priv *priv, + struct caam_blob_info *info, bool encap); + +/** + * caam_encap_blob - encapsulate blob + * @priv: instance returned by caam_blob_gen_init() + * @info: pointer to blobbing info describing input key, + * output blob and key modifier buffers. + * + * Return: %0 and sets ``info->output_len`` on success and + * a negative error code otherwise. + */ +static inline int caam_encap_blob(struct caam_blob_priv *priv, + struct caam_blob_info *info) +{ + if (info->output_len < info->input_len + CAAM_BLOB_OVERHEAD) + return -EINVAL; + + return caam_process_blob(priv, info, true); +} + +/** + * caam_decap_blob - decapsulate blob + * @priv: instance returned by caam_blob_gen_init() + * @info: pointer to blobbing info describing output key, + * input blob and key modifier buffers. + * + * Return: %0 and sets ``info->output_len`` on success and + * a negative error code otherwise. + */ +static inline int caam_decap_blob(struct caam_blob_priv *priv, + struct caam_blob_info *info) +{ + if (info->input_len < CAAM_BLOB_OVERHEAD || + info->output_len < info->input_len - CAAM_BLOB_OVERHEAD) + return -EINVAL; + + return caam_process_blob(priv, info, false); +} + +#endif diff --git a/include/soc/fsl/cpm.h b/include/soc/fsl/cpm.h new file mode 100644 index 000000000..4c24ea820 --- /dev/null +++ b/include/soc/fsl/cpm.h @@ -0,0 +1,171 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __CPM_H +#define __CPM_H + +#include <linux/compiler.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/of.h> +#include <soc/fsl/qe/qe.h> + +/* + * SPI Parameter RAM common to QE and CPM. + */ +struct spi_pram { + __be16 rbase; /* Rx Buffer descriptor base address */ + __be16 tbase; /* Tx Buffer descriptor base address */ + u8 rfcr; /* Rx function code */ + u8 tfcr; /* Tx function code */ + __be16 mrblr; /* Max receive buffer length */ + __be32 rstate; /* Internal */ + __be32 rdp; /* Internal */ + __be16 rbptr; /* Internal */ + __be16 rbc; /* Internal */ + __be32 rxtmp; /* Internal */ + __be32 tstate; /* Internal */ + __be32 tdp; /* Internal */ + __be16 tbptr; /* Internal */ + __be16 tbc; /* Internal */ + __be32 txtmp; /* Internal */ + __be32 res; /* Tx temp. */ + __be16 rpbase; /* Relocation pointer (CPM1 only) */ + __be16 res1; /* Reserved */ +}; + +/* + * USB Controller pram common to QE and CPM. + */ +struct usb_ctlr { + u8 usb_usmod; + u8 usb_usadr; + u8 usb_uscom; + u8 res1[1]; + __be16 usb_usep[4]; + u8 res2[4]; + __be16 usb_usber; + u8 res3[2]; + __be16 usb_usbmr; + u8 res4[1]; + u8 usb_usbs; + /* Fields down below are QE-only */ + __be16 usb_ussft; + u8 res5[2]; + __be16 usb_usfrn; + u8 res6[0x22]; +} __attribute__ ((packed)); + +/* + * Function code bits, usually generic to devices. + */ +#ifdef CONFIG_CPM1 +#define CPMFCR_GBL ((u_char)0x00) /* Flag doesn't exist in CPM1 */ +#define CPMFCR_TC2 ((u_char)0x00) /* Flag doesn't exist in CPM1 */ +#define CPMFCR_DTB ((u_char)0x00) /* Flag doesn't exist in CPM1 */ +#define CPMFCR_BDB ((u_char)0x00) /* Flag doesn't exist in CPM1 */ +#else +#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */ +#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */ +#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */ +#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */ +#endif +#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */ + +/* Opcodes common to CPM1 and CPM2 +*/ +#define CPM_CR_INIT_TRX ((ushort)0x0000) +#define CPM_CR_INIT_RX ((ushort)0x0001) +#define CPM_CR_INIT_TX ((ushort)0x0002) +#define CPM_CR_HUNT_MODE ((ushort)0x0003) +#define CPM_CR_STOP_TX ((ushort)0x0004) +#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) +#define CPM_CR_RESTART_TX ((ushort)0x0006) +#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007) +#define CPM_CR_SET_GADDR ((ushort)0x0008) +#define CPM_CR_SET_TIMER ((ushort)0x0008) +#define CPM_CR_STOP_IDMA ((ushort)0x000b) + +/* Buffer descriptors used by many of the CPM protocols. */ +typedef struct cpm_buf_desc { + ushort cbd_sc; /* Status and Control */ + ushort cbd_datlen; /* Data length in buffer */ + uint cbd_bufaddr; /* Buffer address in host memory */ +} cbd_t; + +/* Buffer descriptor control/status used by serial + */ + +#define BD_SC_EMPTY (0x8000) /* Receive is empty */ +#define BD_SC_READY (0x8000) /* Transmit is ready */ +#define BD_SC_WRAP (0x2000) /* Last buffer descriptor */ +#define BD_SC_INTRPT (0x1000) /* Interrupt on change */ +#define BD_SC_LAST (0x0800) /* Last buffer in frame */ +#define BD_SC_TC (0x0400) /* Transmit CRC */ +#define BD_SC_CM (0x0200) /* Continuous mode */ +#define BD_SC_ID (0x0100) /* Rec'd too many idles */ +#define BD_SC_P (0x0100) /* xmt preamble */ +#define BD_SC_BR (0x0020) /* Break received */ +#define BD_SC_FR (0x0010) /* Framing error */ +#define BD_SC_PR (0x0008) /* Parity error */ +#define BD_SC_NAK (0x0004) /* NAK - did not respond */ +#define BD_SC_OV (0x0002) /* Overrun */ +#define BD_SC_UN (0x0002) /* Underrun */ +#define BD_SC_CD (0x0001) /* */ +#define BD_SC_CL (0x0001) /* Collision */ + +/* Buffer descriptor control/status used by Ethernet receive. + * Common to SCC and FCC. + */ +#define BD_ENET_RX_EMPTY (0x8000) +#define BD_ENET_RX_WRAP (0x2000) +#define BD_ENET_RX_INTR (0x1000) +#define BD_ENET_RX_LAST (0x0800) +#define BD_ENET_RX_FIRST (0x0400) +#define BD_ENET_RX_MISS (0x0100) +#define BD_ENET_RX_BC (0x0080) /* FCC Only */ +#define BD_ENET_RX_MC (0x0040) /* FCC Only */ +#define BD_ENET_RX_LG (0x0020) +#define BD_ENET_RX_NO (0x0010) +#define BD_ENET_RX_SH (0x0008) +#define BD_ENET_RX_CR (0x0004) +#define BD_ENET_RX_OV (0x0002) +#define BD_ENET_RX_CL (0x0001) +#define BD_ENET_RX_STATS (0x01ff) /* All status bits */ + +/* Buffer descriptor control/status used by Ethernet transmit. + * Common to SCC and FCC. + */ +#define BD_ENET_TX_READY (0x8000) +#define BD_ENET_TX_PAD (0x4000) +#define BD_ENET_TX_WRAP (0x2000) +#define BD_ENET_TX_INTR (0x1000) +#define BD_ENET_TX_LAST (0x0800) +#define BD_ENET_TX_TC (0x0400) +#define BD_ENET_TX_DEF (0x0200) +#define BD_ENET_TX_HB (0x0100) +#define BD_ENET_TX_LC (0x0080) +#define BD_ENET_TX_RL (0x0040) +#define BD_ENET_TX_RCMASK (0x003c) +#define BD_ENET_TX_UN (0x0002) +#define BD_ENET_TX_CSL (0x0001) +#define BD_ENET_TX_STATS (0x03ff) /* All status bits */ + +/* Buffer descriptor control/status used by Transparent mode SCC. + */ +#define BD_SCC_TX_LAST (0x0800) + +/* Buffer descriptor control/status used by I2C. + */ +#define BD_I2C_START (0x0400) + +#ifdef CONFIG_CPM +int cpm_command(u32 command, u8 opcode); +#else +static inline int cpm_command(u32 command, u8 opcode) +{ + return -ENOSYS; +} +#endif /* CONFIG_CPM */ + +int cpm2_gpiochip_add32(struct device *dev); + +#endif diff --git a/include/soc/fsl/dpaa2-fd.h b/include/soc/fsl/dpaa2-fd.h new file mode 100644 index 000000000..bae490cac --- /dev/null +++ b/include/soc/fsl/dpaa2-fd.h @@ -0,0 +1,681 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright 2014-2016 Freescale Semiconductor Inc. + * Copyright 2016 NXP + * + */ +#ifndef __FSL_DPAA2_FD_H +#define __FSL_DPAA2_FD_H + +#include <linux/byteorder/generic.h> +#include <linux/types.h> + +/** + * DOC: DPAA2 FD - Frame Descriptor APIs for DPAA2 + * + * Frame Descriptors (FDs) are used to describe frame data in the DPAA2. + * Frames can be enqueued and dequeued to Frame Queues (FQs) which are consumed + * by the various DPAA accelerators (WRIOP, SEC, PME, DCE) + * + * There are three types of frames: single, scatter gather, and frame lists. + * + * The set of APIs in this file must be used to create, manipulate and + * query Frame Descriptors. + */ + +/** + * struct dpaa2_fd - Struct describing FDs + * @words: for easier/faster copying the whole FD structure + * @addr: address in the FD + * @len: length in the FD + * @bpid: buffer pool ID + * @format_offset: format, offset, and short-length fields + * @frc: frame context + * @ctrl: control bits...including dd, sc, va, err, etc + * @flc: flow context address + * + * This structure represents the basic Frame Descriptor used in the system. + */ +struct dpaa2_fd { + union { + u32 words[8]; + struct dpaa2_fd_simple { + __le64 addr; + __le32 len; + __le16 bpid; + __le16 format_offset; + __le32 frc; + __le32 ctrl; + __le64 flc; + } simple; + }; +}; + +#define FD_SHORT_LEN_FLAG_MASK 0x1 +#define FD_SHORT_LEN_FLAG_SHIFT 14 +#define FD_SHORT_LEN_MASK 0x3FFFF +#define FD_OFFSET_MASK 0x0FFF +#define FD_FORMAT_MASK 0x3 +#define FD_FORMAT_SHIFT 12 +#define FD_BPID_MASK 0x3FFF +#define SG_SHORT_LEN_FLAG_MASK 0x1 +#define SG_SHORT_LEN_FLAG_SHIFT 14 +#define SG_SHORT_LEN_MASK 0x1FFFF +#define SG_OFFSET_MASK 0x0FFF +#define SG_FORMAT_MASK 0x3 +#define SG_FORMAT_SHIFT 12 +#define SG_BPID_MASK 0x3FFF +#define SG_FINAL_FLAG_MASK 0x1 +#define SG_FINAL_FLAG_SHIFT 15 +#define FL_SHORT_LEN_FLAG_MASK 0x1 +#define FL_SHORT_LEN_FLAG_SHIFT 14 +#define FL_SHORT_LEN_MASK 0x3FFFF +#define FL_OFFSET_MASK 0x0FFF +#define FL_FORMAT_MASK 0x3 +#define FL_FORMAT_SHIFT 12 +#define FL_BPID_MASK 0x3FFF +#define FL_FINAL_FLAG_MASK 0x1 +#define FL_FINAL_FLAG_SHIFT 15 + +/* Error bits in FD CTRL */ +#define FD_CTRL_ERR_MASK 0x000000FF +#define FD_CTRL_UFD 0x00000004 +#define FD_CTRL_SBE 0x00000008 +#define FD_CTRL_FLC 0x00000010 +#define FD_CTRL_FSE 0x00000020 +#define FD_CTRL_FAERR 0x00000040 + +/* Annotation bits in FD CTRL */ +#define FD_CTRL_PTA 0x00800000 +#define FD_CTRL_PTV1 0x00400000 + +enum dpaa2_fd_format { + dpaa2_fd_single = 0, + dpaa2_fd_list, + dpaa2_fd_sg +}; + +/** + * dpaa2_fd_get_addr() - get the addr field of frame descriptor + * @fd: the given frame descriptor + * + * Return the address in the frame descriptor. + */ +static inline dma_addr_t dpaa2_fd_get_addr(const struct dpaa2_fd *fd) +{ + return (dma_addr_t)le64_to_cpu(fd->simple.addr); +} + +/** + * dpaa2_fd_set_addr() - Set the addr field of frame descriptor + * @fd: the given frame descriptor + * @addr: the address needs to be set in frame descriptor + */ +static inline void dpaa2_fd_set_addr(struct dpaa2_fd *fd, dma_addr_t addr) +{ + fd->simple.addr = cpu_to_le64(addr); +} + +/** + * dpaa2_fd_get_frc() - Get the frame context in the frame descriptor + * @fd: the given frame descriptor + * + * Return the frame context field in the frame descriptor. + */ +static inline u32 dpaa2_fd_get_frc(const struct dpaa2_fd *fd) +{ + return le32_to_cpu(fd->simple.frc); +} + +/** + * dpaa2_fd_set_frc() - Set the frame context in the frame descriptor + * @fd: the given frame descriptor + * @frc: the frame context needs to be set in frame descriptor + */ +static inline void dpaa2_fd_set_frc(struct dpaa2_fd *fd, u32 frc) +{ + fd->simple.frc = cpu_to_le32(frc); +} + +/** + * dpaa2_fd_get_ctrl() - Get the control bits in the frame descriptor + * @fd: the given frame descriptor + * + * Return the control bits field in the frame descriptor. + */ +static inline u32 dpaa2_fd_get_ctrl(const struct dpaa2_fd *fd) +{ + return le32_to_cpu(fd->simple.ctrl); +} + +/** + * dpaa2_fd_set_ctrl() - Set the control bits in the frame descriptor + * @fd: the given frame descriptor + * @ctrl: the control bits to be set in the frame descriptor + */ +static inline void dpaa2_fd_set_ctrl(struct dpaa2_fd *fd, u32 ctrl) +{ + fd->simple.ctrl = cpu_to_le32(ctrl); +} + +/** + * dpaa2_fd_get_flc() - Get the flow context in the frame descriptor + * @fd: the given frame descriptor + * + * Return the flow context in the frame descriptor. + */ +static inline dma_addr_t dpaa2_fd_get_flc(const struct dpaa2_fd *fd) +{ + return (dma_addr_t)le64_to_cpu(fd->simple.flc); +} + +/** + * dpaa2_fd_set_flc() - Set the flow context field of frame descriptor + * @fd: the given frame descriptor + * @flc_addr: the flow context needs to be set in frame descriptor + */ +static inline void dpaa2_fd_set_flc(struct dpaa2_fd *fd, dma_addr_t flc_addr) +{ + fd->simple.flc = cpu_to_le64(flc_addr); +} + +static inline bool dpaa2_fd_short_len(const struct dpaa2_fd *fd) +{ + return !!((le16_to_cpu(fd->simple.format_offset) >> + FD_SHORT_LEN_FLAG_SHIFT) & FD_SHORT_LEN_FLAG_MASK); +} + +/** + * dpaa2_fd_get_len() - Get the length in the frame descriptor + * @fd: the given frame descriptor + * + * Return the length field in the frame descriptor. + */ +static inline u32 dpaa2_fd_get_len(const struct dpaa2_fd *fd) +{ + if (dpaa2_fd_short_len(fd)) + return le32_to_cpu(fd->simple.len) & FD_SHORT_LEN_MASK; + + return le32_to_cpu(fd->simple.len); +} + +/** + * dpaa2_fd_set_len() - Set the length field of frame descriptor + * @fd: the given frame descriptor + * @len: the length needs to be set in frame descriptor + */ +static inline void dpaa2_fd_set_len(struct dpaa2_fd *fd, u32 len) +{ + fd->simple.len = cpu_to_le32(len); +} + +/** + * dpaa2_fd_get_offset() - Get the offset field in the frame descriptor + * @fd: the given frame descriptor + * + * Return the offset. + */ +static inline uint16_t dpaa2_fd_get_offset(const struct dpaa2_fd *fd) +{ + return le16_to_cpu(fd->simple.format_offset) & FD_OFFSET_MASK; +} + +/** + * dpaa2_fd_set_offset() - Set the offset field of frame descriptor + * @fd: the given frame descriptor + * @offset: the offset needs to be set in frame descriptor + */ +static inline void dpaa2_fd_set_offset(struct dpaa2_fd *fd, uint16_t offset) +{ + fd->simple.format_offset &= cpu_to_le16(~FD_OFFSET_MASK); + fd->simple.format_offset |= cpu_to_le16(offset); +} + +/** + * dpaa2_fd_get_format() - Get the format field in the frame descriptor + * @fd: the given frame descriptor + * + * Return the format. + */ +static inline enum dpaa2_fd_format dpaa2_fd_get_format( + const struct dpaa2_fd *fd) +{ + return (enum dpaa2_fd_format)((le16_to_cpu(fd->simple.format_offset) + >> FD_FORMAT_SHIFT) & FD_FORMAT_MASK); +} + +/** + * dpaa2_fd_set_format() - Set the format field of frame descriptor + * @fd: the given frame descriptor + * @format: the format needs to be set in frame descriptor + */ +static inline void dpaa2_fd_set_format(struct dpaa2_fd *fd, + enum dpaa2_fd_format format) +{ + fd->simple.format_offset &= + cpu_to_le16(~(FD_FORMAT_MASK << FD_FORMAT_SHIFT)); + fd->simple.format_offset |= cpu_to_le16(format << FD_FORMAT_SHIFT); +} + +/** + * dpaa2_fd_get_bpid() - Get the bpid field in the frame descriptor + * @fd: the given frame descriptor + * + * Return the buffer pool id. + */ +static inline uint16_t dpaa2_fd_get_bpid(const struct dpaa2_fd *fd) +{ + return le16_to_cpu(fd->simple.bpid) & FD_BPID_MASK; +} + +/** + * dpaa2_fd_set_bpid() - Set the bpid field of frame descriptor + * @fd: the given frame descriptor + * @bpid: buffer pool id to be set + */ +static inline void dpaa2_fd_set_bpid(struct dpaa2_fd *fd, uint16_t bpid) +{ + fd->simple.bpid &= cpu_to_le16(~(FD_BPID_MASK)); + fd->simple.bpid |= cpu_to_le16(bpid); +} + +/** + * struct dpaa2_sg_entry - the scatter-gathering structure + * @addr: address of the sg entry + * @len: length in this sg entry + * @bpid: buffer pool id + * @format_offset: format and offset fields + */ +struct dpaa2_sg_entry { + __le64 addr; + __le32 len; + __le16 bpid; + __le16 format_offset; +}; + +enum dpaa2_sg_format { + dpaa2_sg_single = 0, + dpaa2_sg_frame_data, + dpaa2_sg_sgt_ext +}; + +/* Accessors for SG entry fields */ + +/** + * dpaa2_sg_get_addr() - Get the address from SG entry + * @sg: the given scatter-gathering object + * + * Return the address. + */ +static inline dma_addr_t dpaa2_sg_get_addr(const struct dpaa2_sg_entry *sg) +{ + return (dma_addr_t)le64_to_cpu(sg->addr); +} + +/** + * dpaa2_sg_set_addr() - Set the address in SG entry + * @sg: the given scatter-gathering object + * @addr: the address to be set + */ +static inline void dpaa2_sg_set_addr(struct dpaa2_sg_entry *sg, dma_addr_t addr) +{ + sg->addr = cpu_to_le64(addr); +} + +static inline bool dpaa2_sg_short_len(const struct dpaa2_sg_entry *sg) +{ + return !!((le16_to_cpu(sg->format_offset) >> SG_SHORT_LEN_FLAG_SHIFT) + & SG_SHORT_LEN_FLAG_MASK); +} + +/** + * dpaa2_sg_get_len() - Get the length in SG entry + * @sg: the given scatter-gathering object + * + * Return the length. + */ +static inline u32 dpaa2_sg_get_len(const struct dpaa2_sg_entry *sg) +{ + if (dpaa2_sg_short_len(sg)) + return le32_to_cpu(sg->len) & SG_SHORT_LEN_MASK; + + return le32_to_cpu(sg->len); +} + +/** + * dpaa2_sg_set_len() - Set the length in SG entry + * @sg: the given scatter-gathering object + * @len: the length to be set + */ +static inline void dpaa2_sg_set_len(struct dpaa2_sg_entry *sg, u32 len) +{ + sg->len = cpu_to_le32(len); +} + +/** + * dpaa2_sg_get_offset() - Get the offset in SG entry + * @sg: the given scatter-gathering object + * + * Return the offset. + */ +static inline u16 dpaa2_sg_get_offset(const struct dpaa2_sg_entry *sg) +{ + return le16_to_cpu(sg->format_offset) & SG_OFFSET_MASK; +} + +/** + * dpaa2_sg_set_offset() - Set the offset in SG entry + * @sg: the given scatter-gathering object + * @offset: the offset to be set + */ +static inline void dpaa2_sg_set_offset(struct dpaa2_sg_entry *sg, + u16 offset) +{ + sg->format_offset &= cpu_to_le16(~SG_OFFSET_MASK); + sg->format_offset |= cpu_to_le16(offset); +} + +/** + * dpaa2_sg_get_format() - Get the SG format in SG entry + * @sg: the given scatter-gathering object + * + * Return the format. + */ +static inline enum dpaa2_sg_format + dpaa2_sg_get_format(const struct dpaa2_sg_entry *sg) +{ + return (enum dpaa2_sg_format)((le16_to_cpu(sg->format_offset) + >> SG_FORMAT_SHIFT) & SG_FORMAT_MASK); +} + +/** + * dpaa2_sg_set_format() - Set the SG format in SG entry + * @sg: the given scatter-gathering object + * @format: the format to be set + */ +static inline void dpaa2_sg_set_format(struct dpaa2_sg_entry *sg, + enum dpaa2_sg_format format) +{ + sg->format_offset &= cpu_to_le16(~(SG_FORMAT_MASK << SG_FORMAT_SHIFT)); + sg->format_offset |= cpu_to_le16(format << SG_FORMAT_SHIFT); +} + +/** + * dpaa2_sg_get_bpid() - Get the buffer pool id in SG entry + * @sg: the given scatter-gathering object + * + * Return the bpid. + */ +static inline u16 dpaa2_sg_get_bpid(const struct dpaa2_sg_entry *sg) +{ + return le16_to_cpu(sg->bpid) & SG_BPID_MASK; +} + +/** + * dpaa2_sg_set_bpid() - Set the buffer pool id in SG entry + * @sg: the given scatter-gathering object + * @bpid: the bpid to be set + */ +static inline void dpaa2_sg_set_bpid(struct dpaa2_sg_entry *sg, u16 bpid) +{ + sg->bpid &= cpu_to_le16(~(SG_BPID_MASK)); + sg->bpid |= cpu_to_le16(bpid); +} + +/** + * dpaa2_sg_is_final() - Check final bit in SG entry + * @sg: the given scatter-gathering object + * + * Return bool. + */ +static inline bool dpaa2_sg_is_final(const struct dpaa2_sg_entry *sg) +{ + return !!(le16_to_cpu(sg->format_offset) >> SG_FINAL_FLAG_SHIFT); +} + +/** + * dpaa2_sg_set_final() - Set the final bit in SG entry + * @sg: the given scatter-gathering object + * @final: the final boolean to be set + */ +static inline void dpaa2_sg_set_final(struct dpaa2_sg_entry *sg, bool final) +{ + sg->format_offset &= cpu_to_le16((~(SG_FINAL_FLAG_MASK + << SG_FINAL_FLAG_SHIFT)) & 0xFFFF); + sg->format_offset |= cpu_to_le16(final << SG_FINAL_FLAG_SHIFT); +} + +/** + * struct dpaa2_fl_entry - structure for frame list entry. + * @addr: address in the FLE + * @len: length in the FLE + * @bpid: buffer pool ID + * @format_offset: format, offset, and short-length fields + * @frc: frame context + * @ctrl: control bits...including pta, pvt1, pvt2, err, etc + * @flc: flow context address + */ +struct dpaa2_fl_entry { + __le64 addr; + __le32 len; + __le16 bpid; + __le16 format_offset; + __le32 frc; + __le32 ctrl; + __le64 flc; +}; + +enum dpaa2_fl_format { + dpaa2_fl_single = 0, + dpaa2_fl_res, + dpaa2_fl_sg +}; + +/** + * dpaa2_fl_get_addr() - get the addr field of FLE + * @fle: the given frame list entry + * + * Return the address in the frame list entry. + */ +static inline dma_addr_t dpaa2_fl_get_addr(const struct dpaa2_fl_entry *fle) +{ + return (dma_addr_t)le64_to_cpu(fle->addr); +} + +/** + * dpaa2_fl_set_addr() - Set the addr field of FLE + * @fle: the given frame list entry + * @addr: the address needs to be set in frame list entry + */ +static inline void dpaa2_fl_set_addr(struct dpaa2_fl_entry *fle, + dma_addr_t addr) +{ + fle->addr = cpu_to_le64(addr); +} + +/** + * dpaa2_fl_get_frc() - Get the frame context in the FLE + * @fle: the given frame list entry + * + * Return the frame context field in the frame lsit entry. + */ +static inline u32 dpaa2_fl_get_frc(const struct dpaa2_fl_entry *fle) +{ + return le32_to_cpu(fle->frc); +} + +/** + * dpaa2_fl_set_frc() - Set the frame context in the FLE + * @fle: the given frame list entry + * @frc: the frame context needs to be set in frame list entry + */ +static inline void dpaa2_fl_set_frc(struct dpaa2_fl_entry *fle, u32 frc) +{ + fle->frc = cpu_to_le32(frc); +} + +/** + * dpaa2_fl_get_ctrl() - Get the control bits in the FLE + * @fle: the given frame list entry + * + * Return the control bits field in the frame list entry. + */ +static inline u32 dpaa2_fl_get_ctrl(const struct dpaa2_fl_entry *fle) +{ + return le32_to_cpu(fle->ctrl); +} + +/** + * dpaa2_fl_set_ctrl() - Set the control bits in the FLE + * @fle: the given frame list entry + * @ctrl: the control bits to be set in the frame list entry + */ +static inline void dpaa2_fl_set_ctrl(struct dpaa2_fl_entry *fle, u32 ctrl) +{ + fle->ctrl = cpu_to_le32(ctrl); +} + +/** + * dpaa2_fl_get_flc() - Get the flow context in the FLE + * @fle: the given frame list entry + * + * Return the flow context in the frame list entry. + */ +static inline dma_addr_t dpaa2_fl_get_flc(const struct dpaa2_fl_entry *fle) +{ + return (dma_addr_t)le64_to_cpu(fle->flc); +} + +/** + * dpaa2_fl_set_flc() - Set the flow context field of FLE + * @fle: the given frame list entry + * @flc_addr: the flow context needs to be set in frame list entry + */ +static inline void dpaa2_fl_set_flc(struct dpaa2_fl_entry *fle, + dma_addr_t flc_addr) +{ + fle->flc = cpu_to_le64(flc_addr); +} + +static inline bool dpaa2_fl_short_len(const struct dpaa2_fl_entry *fle) +{ + return !!((le16_to_cpu(fle->format_offset) >> + FL_SHORT_LEN_FLAG_SHIFT) & FL_SHORT_LEN_FLAG_MASK); +} + +/** + * dpaa2_fl_get_len() - Get the length in the FLE + * @fle: the given frame list entry + * + * Return the length field in the frame list entry. + */ +static inline u32 dpaa2_fl_get_len(const struct dpaa2_fl_entry *fle) +{ + if (dpaa2_fl_short_len(fle)) + return le32_to_cpu(fle->len) & FL_SHORT_LEN_MASK; + + return le32_to_cpu(fle->len); +} + +/** + * dpaa2_fl_set_len() - Set the length field of FLE + * @fle: the given frame list entry + * @len: the length needs to be set in frame list entry + */ +static inline void dpaa2_fl_set_len(struct dpaa2_fl_entry *fle, u32 len) +{ + fle->len = cpu_to_le32(len); +} + +/** + * dpaa2_fl_get_offset() - Get the offset field in the frame list entry + * @fle: the given frame list entry + * + * Return the offset. + */ +static inline u16 dpaa2_fl_get_offset(const struct dpaa2_fl_entry *fle) +{ + return le16_to_cpu(fle->format_offset) & FL_OFFSET_MASK; +} + +/** + * dpaa2_fl_set_offset() - Set the offset field of FLE + * @fle: the given frame list entry + * @offset: the offset needs to be set in frame list entry + */ +static inline void dpaa2_fl_set_offset(struct dpaa2_fl_entry *fle, u16 offset) +{ + fle->format_offset &= cpu_to_le16(~FL_OFFSET_MASK); + fle->format_offset |= cpu_to_le16(offset); +} + +/** + * dpaa2_fl_get_format() - Get the format field in the FLE + * @fle: the given frame list entry + * + * Return the format. + */ +static inline enum dpaa2_fl_format dpaa2_fl_get_format(const struct dpaa2_fl_entry *fle) +{ + return (enum dpaa2_fl_format)((le16_to_cpu(fle->format_offset) >> + FL_FORMAT_SHIFT) & FL_FORMAT_MASK); +} + +/** + * dpaa2_fl_set_format() - Set the format field of FLE + * @fle: the given frame list entry + * @format: the format needs to be set in frame list entry + */ +static inline void dpaa2_fl_set_format(struct dpaa2_fl_entry *fle, + enum dpaa2_fl_format format) +{ + fle->format_offset &= cpu_to_le16(~(FL_FORMAT_MASK << FL_FORMAT_SHIFT)); + fle->format_offset |= cpu_to_le16(format << FL_FORMAT_SHIFT); +} + +/** + * dpaa2_fl_get_bpid() - Get the bpid field in the FLE + * @fle: the given frame list entry + * + * Return the buffer pool id. + */ +static inline u16 dpaa2_fl_get_bpid(const struct dpaa2_fl_entry *fle) +{ + return le16_to_cpu(fle->bpid) & FL_BPID_MASK; +} + +/** + * dpaa2_fl_set_bpid() - Set the bpid field of FLE + * @fle: the given frame list entry + * @bpid: buffer pool id to be set + */ +static inline void dpaa2_fl_set_bpid(struct dpaa2_fl_entry *fle, u16 bpid) +{ + fle->bpid &= cpu_to_le16(~(FL_BPID_MASK)); + fle->bpid |= cpu_to_le16(bpid); +} + +/** + * dpaa2_fl_is_final() - Check final bit in FLE + * @fle: the given frame list entry + * + * Return bool. + */ +static inline bool dpaa2_fl_is_final(const struct dpaa2_fl_entry *fle) +{ + return !!(le16_to_cpu(fle->format_offset) >> FL_FINAL_FLAG_SHIFT); +} + +/** + * dpaa2_fl_set_final() - Set the final bit in FLE + * @fle: the given frame list entry + * @final: the final boolean to be set + */ +static inline void dpaa2_fl_set_final(struct dpaa2_fl_entry *fle, bool final) +{ + fle->format_offset &= cpu_to_le16((~(FL_FINAL_FLAG_MASK << + FL_FINAL_FLAG_SHIFT)) & 0xFFFF); + fle->format_offset |= cpu_to_le16(final << FL_FINAL_FLAG_SHIFT); +} + +#endif /* __FSL_DPAA2_FD_H */ diff --git a/include/soc/fsl/dpaa2-global.h b/include/soc/fsl/dpaa2-global.h new file mode 100644 index 000000000..2bfc379d3 --- /dev/null +++ b/include/soc/fsl/dpaa2-global.h @@ -0,0 +1,192 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright 2014-2016 Freescale Semiconductor Inc. + * Copyright 2016 NXP + * + */ +#ifndef __FSL_DPAA2_GLOBAL_H +#define __FSL_DPAA2_GLOBAL_H + +#include <linux/types.h> +#include <linux/cpumask.h> +#include "dpaa2-fd.h" + +struct dpaa2_dq { + union { + struct common { + u8 verb; + u8 reserved[63]; + } common; + struct dq { + u8 verb; + u8 stat; + __le16 seqnum; + __le16 oprid; + u8 reserved; + u8 tok; + __le32 fqid; + u32 reserved2; + __le32 fq_byte_cnt; + __le32 fq_frm_cnt; + __le64 fqd_ctx; + u8 fd[32]; + } dq; + struct scn { + u8 verb; + u8 stat; + u8 state; + u8 reserved; + __le32 rid_tok; + __le64 ctx; + } scn; + }; +}; + +/* Parsing frame dequeue results */ +/* FQ empty */ +#define DPAA2_DQ_STAT_FQEMPTY 0x80 +/* FQ held active */ +#define DPAA2_DQ_STAT_HELDACTIVE 0x40 +/* FQ force eligible */ +#define DPAA2_DQ_STAT_FORCEELIGIBLE 0x20 +/* valid frame */ +#define DPAA2_DQ_STAT_VALIDFRAME 0x10 +/* FQ ODP enable */ +#define DPAA2_DQ_STAT_ODPVALID 0x04 +/* volatile dequeue */ +#define DPAA2_DQ_STAT_VOLATILE 0x02 +/* volatile dequeue command is expired */ +#define DPAA2_DQ_STAT_EXPIRED 0x01 + +#define DQ_FQID_MASK 0x00FFFFFF +#define DQ_FRAME_COUNT_MASK 0x00FFFFFF + +/** + * dpaa2_dq_flags() - Get the stat field of dequeue response + * @dq: the dequeue result. + */ +static inline u32 dpaa2_dq_flags(const struct dpaa2_dq *dq) +{ + return dq->dq.stat; +} + +/** + * dpaa2_dq_is_pull() - Check whether the dq response is from a pull + * command. + * @dq: the dequeue result + * + * Return 1 for volatile(pull) dequeue, 0 for static dequeue. + */ +static inline int dpaa2_dq_is_pull(const struct dpaa2_dq *dq) +{ + return (int)(dpaa2_dq_flags(dq) & DPAA2_DQ_STAT_VOLATILE); +} + +/** + * dpaa2_dq_is_pull_complete() - Check whether the pull command is completed. + * @dq: the dequeue result + * + * Return boolean. + */ +static inline bool dpaa2_dq_is_pull_complete(const struct dpaa2_dq *dq) +{ + return !!(dpaa2_dq_flags(dq) & DPAA2_DQ_STAT_EXPIRED); +} + +/** + * dpaa2_dq_seqnum() - Get the seqnum field in dequeue response + * @dq: the dequeue result + * + * seqnum is valid only if VALIDFRAME flag is TRUE + * + * Return seqnum. + */ +static inline u16 dpaa2_dq_seqnum(const struct dpaa2_dq *dq) +{ + return le16_to_cpu(dq->dq.seqnum); +} + +/** + * dpaa2_dq_odpid() - Get the odpid field in dequeue response + * @dq: the dequeue result + * + * odpid is valid only if ODPVALID flag is TRUE. + * + * Return odpid. + */ +static inline u16 dpaa2_dq_odpid(const struct dpaa2_dq *dq) +{ + return le16_to_cpu(dq->dq.oprid); +} + +/** + * dpaa2_dq_fqid() - Get the fqid in dequeue response + * @dq: the dequeue result + * + * Return fqid. + */ +static inline u32 dpaa2_dq_fqid(const struct dpaa2_dq *dq) +{ + return le32_to_cpu(dq->dq.fqid) & DQ_FQID_MASK; +} + +/** + * dpaa2_dq_byte_count() - Get the byte count in dequeue response + * @dq: the dequeue result + * + * Return the byte count remaining in the FQ. + */ +static inline u32 dpaa2_dq_byte_count(const struct dpaa2_dq *dq) +{ + return le32_to_cpu(dq->dq.fq_byte_cnt); +} + +/** + * dpaa2_dq_frame_count() - Get the frame count in dequeue response + * @dq: the dequeue result + * + * Return the frame count remaining in the FQ. + */ +static inline u32 dpaa2_dq_frame_count(const struct dpaa2_dq *dq) +{ + return le32_to_cpu(dq->dq.fq_frm_cnt) & DQ_FRAME_COUNT_MASK; +} + +/** + * dpaa2_dq_fd_ctx() - Get the frame queue context in dequeue response + * @dq: the dequeue result + * + * Return the frame queue context. + */ +static inline u64 dpaa2_dq_fqd_ctx(const struct dpaa2_dq *dq) +{ + return le64_to_cpu(dq->dq.fqd_ctx); +} + +/** + * dpaa2_dq_fd() - Get the frame descriptor in dequeue response + * @dq: the dequeue result + * + * Return the frame descriptor. + */ +static inline const struct dpaa2_fd *dpaa2_dq_fd(const struct dpaa2_dq *dq) +{ + return (const struct dpaa2_fd *)&dq->dq.fd[0]; +} + +#define DPAA2_CSCN_SIZE sizeof(struct dpaa2_dq) +#define DPAA2_CSCN_ALIGN 16 +#define DPAA2_CSCN_STATE_CG BIT(0) + +/** + * dpaa2_cscn_state_congested() - Check congestion state + * @cscn: congestion SCN (delivered to WQ or memory) + * +i * Return true is congested. + */ +static inline bool dpaa2_cscn_state_congested(struct dpaa2_dq *cscn) +{ + return !!(cscn->scn.state & DPAA2_CSCN_STATE_CG); +} + +#endif /* __FSL_DPAA2_GLOBAL_H */ diff --git a/include/soc/fsl/dpaa2-io.h b/include/soc/fsl/dpaa2-io.h new file mode 100644 index 000000000..4bf62de2e --- /dev/null +++ b/include/soc/fsl/dpaa2-io.h @@ -0,0 +1,141 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright 2014-2016 Freescale Semiconductor Inc. + * Copyright 2017-2019 NXP + * + */ +#ifndef __FSL_DPAA2_IO_H +#define __FSL_DPAA2_IO_H + +#include <linux/types.h> +#include <linux/cpumask.h> +#include <linux/irqreturn.h> + +#include "dpaa2-fd.h" +#include "dpaa2-global.h" + +struct dpaa2_io; +struct dpaa2_io_store; +struct device; + +/** + * DOC: DPIO Service + * + * The DPIO service provides APIs for users to interact with the datapath + * by enqueueing and dequeing frame descriptors. + * + * The following set of APIs can be used to enqueue and dequeue frames + * as well as producing notification callbacks when data is available + * for dequeue. + */ + +#define DPAA2_IO_ANY_CPU -1 + +/** + * struct dpaa2_io_desc - The DPIO descriptor + * @receives_notifications: Use notificaton mode. Non-zero if the DPIO + * has a channel. + * @has_8prio: Set to non-zero for channel with 8 priority WQs. Ignored + * unless receives_notification is TRUE. + * @cpu: The cpu index that at least interrupt handlers will + * execute on. + * @stash_affinity: The stash affinity for this portal favour 'cpu' + * @regs_cena: The cache enabled regs. + * @regs_cinh: The cache inhibited regs + * @dpio_id: The dpio index + * @qman_version: The qman version + * @qman_clk: The qman clock frequency in Hz + * + * Describes the attributes and features of the DPIO object. + */ +struct dpaa2_io_desc { + int receives_notifications; + int has_8prio; + int cpu; + void *regs_cena; + void __iomem *regs_cinh; + int dpio_id; + u32 qman_version; + u32 qman_clk; +}; + +struct dpaa2_io *dpaa2_io_create(const struct dpaa2_io_desc *desc, + struct device *dev); + +void dpaa2_io_down(struct dpaa2_io *d); + +irqreturn_t dpaa2_io_irq(struct dpaa2_io *obj); + +struct dpaa2_io *dpaa2_io_service_select(int cpu); + +/** + * struct dpaa2_io_notification_ctx - The DPIO notification context structure + * @cb: The callback to be invoked when the notification arrives + * @is_cdan: Zero for FQDAN, non-zero for CDAN + * @id: FQID or channel ID, needed for rearm + * @desired_cpu: The cpu on which the notifications will show up. Use + * DPAA2_IO_ANY_CPU if don't care + * @dpio_id: The dpio index + * @qman64: The 64-bit context value shows up in the FQDAN/CDAN. + * @node: The list node + * @dpio_private: The dpio object internal to dpio_service + * + * Used when a FQDAN/CDAN registration is made by drivers. + */ +struct dpaa2_io_notification_ctx { + void (*cb)(struct dpaa2_io_notification_ctx *ctx); + int is_cdan; + u32 id; + int desired_cpu; + int dpio_id; + u64 qman64; + struct list_head node; + void *dpio_private; +}; + +int dpaa2_io_get_cpu(struct dpaa2_io *d); + +int dpaa2_io_service_register(struct dpaa2_io *service, + struct dpaa2_io_notification_ctx *ctx, + struct device *dev); +void dpaa2_io_service_deregister(struct dpaa2_io *service, + struct dpaa2_io_notification_ctx *ctx, + struct device *dev); +int dpaa2_io_service_rearm(struct dpaa2_io *service, + struct dpaa2_io_notification_ctx *ctx); + +int dpaa2_io_service_pull_fq(struct dpaa2_io *d, u32 fqid, + struct dpaa2_io_store *s); +int dpaa2_io_service_pull_channel(struct dpaa2_io *d, u32 channelid, + struct dpaa2_io_store *s); + +int dpaa2_io_service_enqueue_fq(struct dpaa2_io *d, u32 fqid, + const struct dpaa2_fd *fd); +int dpaa2_io_service_enqueue_multiple_fq(struct dpaa2_io *d, u32 fqid, + const struct dpaa2_fd *fd, int number_of_frame); +int dpaa2_io_service_enqueue_multiple_desc_fq(struct dpaa2_io *d, u32 *fqid, + const struct dpaa2_fd *fd, int number_of_frame); +int dpaa2_io_service_enqueue_qd(struct dpaa2_io *d, u32 qdid, u8 prio, + u16 qdbin, const struct dpaa2_fd *fd); +int dpaa2_io_service_release(struct dpaa2_io *d, u16 bpid, + const u64 *buffers, unsigned int num_buffers); +int dpaa2_io_service_acquire(struct dpaa2_io *d, u16 bpid, + u64 *buffers, unsigned int num_buffers); + +struct dpaa2_io_store *dpaa2_io_store_create(unsigned int max_frames, + struct device *dev); +void dpaa2_io_store_destroy(struct dpaa2_io_store *s); +struct dpaa2_dq *dpaa2_io_store_next(struct dpaa2_io_store *s, int *is_last); + +int dpaa2_io_query_fq_count(struct dpaa2_io *d, u32 fqid, + u32 *fcnt, u32 *bcnt); +int dpaa2_io_query_bp_count(struct dpaa2_io *d, u16 bpid, + u32 *num); + +int dpaa2_io_set_irq_coalescing(struct dpaa2_io *d, u32 irq_holdoff); +void dpaa2_io_get_irq_coalescing(struct dpaa2_io *d, u32 *irq_holdoff); +void dpaa2_io_set_adaptive_coalescing(struct dpaa2_io *d, + int use_adaptive_rx_coalesce); +int dpaa2_io_get_adaptive_coalescing(struct dpaa2_io *d); +void dpaa2_io_update_net_dim(struct dpaa2_io *d, __u64 frames, __u64 bytes); +#endif /* __FSL_DPAA2_IO_H */ diff --git a/include/soc/fsl/qe/immap_qe.h b/include/soc/fsl/qe/immap_qe.h new file mode 100644 index 000000000..edd601f53 --- /dev/null +++ b/include/soc/fsl/qe/immap_qe.h @@ -0,0 +1,466 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * QUICC Engine (QE) Internal Memory Map. + * The Internal Memory Map for devices with QE on them. This + * is the superset of all QE devices (8360, etc.). + + * Copyright (C) 2006. Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish <gridish@freescale.com> + * Li Yang <leoli@freescale.com> + */ +#ifndef _ASM_POWERPC_IMMAP_QE_H +#define _ASM_POWERPC_IMMAP_QE_H +#ifdef __KERNEL__ + +#include <linux/types.h> + +#include <asm/io.h> + +#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */ + +/* QE I-RAM */ +struct qe_iram { + __be32 iadd; /* I-RAM Address Register */ + __be32 idata; /* I-RAM Data Register */ + u8 res0[0x04]; + __be32 iready; /* I-RAM Ready Register */ + u8 res1[0x70]; +} __attribute__ ((packed)); + +/* QE Interrupt Controller */ +struct qe_ic_regs { + __be32 qicr; + __be32 qivec; + __be32 qripnr; + __be32 qipnr; + __be32 qipxcc; + __be32 qipycc; + __be32 qipwcc; + __be32 qipzcc; + __be32 qimr; + __be32 qrimr; + __be32 qicnr; + u8 res0[0x4]; + __be32 qiprta; + __be32 qiprtb; + u8 res1[0x4]; + __be32 qricr; + u8 res2[0x20]; + __be32 qhivec; + u8 res3[0x1C]; +} __attribute__ ((packed)); + +/* Communications Processor */ +struct cp_qe { + __be32 cecr; /* QE command register */ + __be32 ceccr; /* QE controller configuration register */ + __be32 cecdr; /* QE command data register */ + u8 res0[0xA]; + __be16 ceter; /* QE timer event register */ + u8 res1[0x2]; + __be16 cetmr; /* QE timers mask register */ + __be32 cetscr; /* QE time-stamp timer control register */ + __be32 cetsr1; /* QE time-stamp register 1 */ + __be32 cetsr2; /* QE time-stamp register 2 */ + u8 res2[0x8]; + __be32 cevter; /* QE virtual tasks event register */ + __be32 cevtmr; /* QE virtual tasks mask register */ + __be16 cercr; /* QE RAM control register */ + u8 res3[0x2]; + u8 res4[0x24]; + __be16 ceexe1; /* QE external request 1 event register */ + u8 res5[0x2]; + __be16 ceexm1; /* QE external request 1 mask register */ + u8 res6[0x2]; + __be16 ceexe2; /* QE external request 2 event register */ + u8 res7[0x2]; + __be16 ceexm2; /* QE external request 2 mask register */ + u8 res8[0x2]; + __be16 ceexe3; /* QE external request 3 event register */ + u8 res9[0x2]; + __be16 ceexm3; /* QE external request 3 mask register */ + u8 res10[0x2]; + __be16 ceexe4; /* QE external request 4 event register */ + u8 res11[0x2]; + __be16 ceexm4; /* QE external request 4 mask register */ + u8 res12[0x3A]; + __be32 ceurnr; /* QE microcode revision number register */ + u8 res13[0x244]; +} __attribute__ ((packed)); + +/* QE Multiplexer */ +struct qe_mux { + __be32 cmxgcr; /* CMX general clock route register */ + __be32 cmxsi1cr_l; /* CMX SI1 clock route low register */ + __be32 cmxsi1cr_h; /* CMX SI1 clock route high register */ + __be32 cmxsi1syr; /* CMX SI1 SYNC route register */ + __be32 cmxucr[4]; /* CMX UCCx clock route registers */ + __be32 cmxupcr; /* CMX UPC clock route register */ + u8 res0[0x1C]; +} __attribute__ ((packed)); + +/* QE Timers */ +struct qe_timers { + u8 gtcfr1; /* Timer 1 and Timer 2 global config register*/ + u8 res0[0x3]; + u8 gtcfr2; /* Timer 3 and timer 4 global config register*/ + u8 res1[0xB]; + __be16 gtmdr1; /* Timer 1 mode register */ + __be16 gtmdr2; /* Timer 2 mode register */ + __be16 gtrfr1; /* Timer 1 reference register */ + __be16 gtrfr2; /* Timer 2 reference register */ + __be16 gtcpr1; /* Timer 1 capture register */ + __be16 gtcpr2; /* Timer 2 capture register */ + __be16 gtcnr1; /* Timer 1 counter */ + __be16 gtcnr2; /* Timer 2 counter */ + __be16 gtmdr3; /* Timer 3 mode register */ + __be16 gtmdr4; /* Timer 4 mode register */ + __be16 gtrfr3; /* Timer 3 reference register */ + __be16 gtrfr4; /* Timer 4 reference register */ + __be16 gtcpr3; /* Timer 3 capture register */ + __be16 gtcpr4; /* Timer 4 capture register */ + __be16 gtcnr3; /* Timer 3 counter */ + __be16 gtcnr4; /* Timer 4 counter */ + __be16 gtevr1; /* Timer 1 event register */ + __be16 gtevr2; /* Timer 2 event register */ + __be16 gtevr3; /* Timer 3 event register */ + __be16 gtevr4; /* Timer 4 event register */ + __be16 gtps; /* Timer 1 prescale register */ + u8 res2[0x46]; +} __attribute__ ((packed)); + +/* BRG */ +struct qe_brg { + __be32 brgc[16]; /* BRG configuration registers */ + u8 res0[0x40]; +} __attribute__ ((packed)); + +/* SPI */ +struct spi { + u8 res0[0x20]; + __be32 spmode; /* SPI mode register */ + u8 res1[0x2]; + u8 spie; /* SPI event register */ + u8 res2[0x1]; + u8 res3[0x2]; + u8 spim; /* SPI mask register */ + u8 res4[0x1]; + u8 res5[0x1]; + u8 spcom; /* SPI command register */ + u8 res6[0x2]; + __be32 spitd; /* SPI transmit data register (cpu mode) */ + __be32 spird; /* SPI receive data register (cpu mode) */ + u8 res7[0x8]; +} __attribute__ ((packed)); + +/* SI */ +struct si1 { + __be16 sixmr1[4]; /* SI1 TDMx (x = A B C D) mode register */ + u8 siglmr1_h; /* SI1 global mode register high */ + u8 res0[0x1]; + u8 sicmdr1_h; /* SI1 command register high */ + u8 res2[0x1]; + u8 sistr1_h; /* SI1 status register high */ + u8 res3[0x1]; + __be16 sirsr1_h; /* SI1 RAM shadow address register high */ + u8 sitarc1; /* SI1 RAM counter Tx TDMA */ + u8 sitbrc1; /* SI1 RAM counter Tx TDMB */ + u8 sitcrc1; /* SI1 RAM counter Tx TDMC */ + u8 sitdrc1; /* SI1 RAM counter Tx TDMD */ + u8 sirarc1; /* SI1 RAM counter Rx TDMA */ + u8 sirbrc1; /* SI1 RAM counter Rx TDMB */ + u8 sircrc1; /* SI1 RAM counter Rx TDMC */ + u8 sirdrc1; /* SI1 RAM counter Rx TDMD */ + u8 res4[0x8]; + __be16 siemr1; /* SI1 TDME mode register 16 bits */ + __be16 sifmr1; /* SI1 TDMF mode register 16 bits */ + __be16 sigmr1; /* SI1 TDMG mode register 16 bits */ + __be16 sihmr1; /* SI1 TDMH mode register 16 bits */ + u8 siglmg1_l; /* SI1 global mode register low 8 bits */ + u8 res5[0x1]; + u8 sicmdr1_l; /* SI1 command register low 8 bits */ + u8 res6[0x1]; + u8 sistr1_l; /* SI1 status register low 8 bits */ + u8 res7[0x1]; + __be16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits*/ + u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */ + u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */ + u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */ + u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */ + u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */ + u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */ + u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */ + u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */ + u8 res8[0x8]; + __be32 siml1; /* SI1 multiframe limit register */ + u8 siedm1; /* SI1 extended diagnostic mode register */ + u8 res9[0xBB]; +} __attribute__ ((packed)); + +/* SI Routing Tables */ +struct sir { + u8 tx[0x400]; + u8 rx[0x400]; + u8 res0[0x800]; +} __attribute__ ((packed)); + +/* USB Controller */ +struct qe_usb_ctlr { + u8 usb_usmod; + u8 usb_usadr; + u8 usb_uscom; + u8 res1[1]; + __be16 usb_usep[4]; + u8 res2[4]; + __be16 usb_usber; + u8 res3[2]; + __be16 usb_usbmr; + u8 res4[1]; + u8 usb_usbs; + __be16 usb_ussft; + u8 res5[2]; + __be16 usb_usfrn; + u8 res6[0x22]; +} __attribute__ ((packed)); + +/* MCC */ +struct qe_mcc { + __be32 mcce; /* MCC event register */ + __be32 mccm; /* MCC mask register */ + __be32 mccf; /* MCC configuration register */ + __be32 merl; /* MCC emergency request level register */ + u8 res0[0xF0]; +} __attribute__ ((packed)); + +/* QE UCC Slow */ +struct ucc_slow { + __be32 gumr_l; /* UCCx general mode register (low) */ + __be32 gumr_h; /* UCCx general mode register (high) */ + __be16 upsmr; /* UCCx protocol-specific mode register */ + u8 res0[0x2]; + __be16 utodr; /* UCCx transmit on demand register */ + __be16 udsr; /* UCCx data synchronization register */ + __be16 ucce; /* UCCx event register */ + u8 res1[0x2]; + __be16 uccm; /* UCCx mask register */ + u8 res2[0x1]; + u8 uccs; /* UCCx status register */ + u8 res3[0x24]; + __be16 utpt; + u8 res4[0x52]; + u8 guemr; /* UCC general extended mode register */ +} __attribute__ ((packed)); + +/* QE UCC Fast */ +struct ucc_fast { + __be32 gumr; /* UCCx general mode register */ + __be32 upsmr; /* UCCx protocol-specific mode register */ + __be16 utodr; /* UCCx transmit on demand register */ + u8 res0[0x2]; + __be16 udsr; /* UCCx data synchronization register */ + u8 res1[0x2]; + __be32 ucce; /* UCCx event register */ + __be32 uccm; /* UCCx mask register */ + u8 uccs; /* UCCx status register */ + u8 res2[0x7]; + __be32 urfb; /* UCC receive FIFO base */ + __be16 urfs; /* UCC receive FIFO size */ + u8 res3[0x2]; + __be16 urfet; /* UCC receive FIFO emergency threshold */ + __be16 urfset; /* UCC receive FIFO special emergency + threshold */ + __be32 utfb; /* UCC transmit FIFO base */ + __be16 utfs; /* UCC transmit FIFO size */ + u8 res4[0x2]; + __be16 utfet; /* UCC transmit FIFO emergency threshold */ + u8 res5[0x2]; + __be16 utftt; /* UCC transmit FIFO transmit threshold */ + u8 res6[0x2]; + __be16 utpt; /* UCC transmit polling timer */ + u8 res7[0x2]; + __be32 urtry; /* UCC retry counter register */ + u8 res8[0x4C]; + u8 guemr; /* UCC general extended mode register */ +} __attribute__ ((packed)); + +struct ucc { + union { + struct ucc_slow slow; + struct ucc_fast fast; + u8 res[0x200]; /* UCC blocks are 512 bytes each */ + }; +} __attribute__ ((packed)); + +/* MultiPHY UTOPIA POS Controllers (UPC) */ +struct upc { + __be32 upgcr; /* UTOPIA/POS general configuration register */ + __be32 uplpa; /* UTOPIA/POS last PHY address */ + __be32 uphec; /* ATM HEC register */ + __be32 upuc; /* UTOPIA/POS UCC configuration */ + __be32 updc1; /* UTOPIA/POS device 1 configuration */ + __be32 updc2; /* UTOPIA/POS device 2 configuration */ + __be32 updc3; /* UTOPIA/POS device 3 configuration */ + __be32 updc4; /* UTOPIA/POS device 4 configuration */ + __be32 upstpa; /* UTOPIA/POS STPA threshold */ + u8 res0[0xC]; + __be32 updrs1_h; /* UTOPIA/POS device 1 rate select */ + __be32 updrs1_l; /* UTOPIA/POS device 1 rate select */ + __be32 updrs2_h; /* UTOPIA/POS device 2 rate select */ + __be32 updrs2_l; /* UTOPIA/POS device 2 rate select */ + __be32 updrs3_h; /* UTOPIA/POS device 3 rate select */ + __be32 updrs3_l; /* UTOPIA/POS device 3 rate select */ + __be32 updrs4_h; /* UTOPIA/POS device 4 rate select */ + __be32 updrs4_l; /* UTOPIA/POS device 4 rate select */ + __be32 updrp1; /* UTOPIA/POS device 1 receive priority low */ + __be32 updrp2; /* UTOPIA/POS device 2 receive priority low */ + __be32 updrp3; /* UTOPIA/POS device 3 receive priority low */ + __be32 updrp4; /* UTOPIA/POS device 4 receive priority low */ + __be32 upde1; /* UTOPIA/POS device 1 event */ + __be32 upde2; /* UTOPIA/POS device 2 event */ + __be32 upde3; /* UTOPIA/POS device 3 event */ + __be32 upde4; /* UTOPIA/POS device 4 event */ + __be16 uprp1; + __be16 uprp2; + __be16 uprp3; + __be16 uprp4; + u8 res1[0x8]; + __be16 uptirr1_0; /* Device 1 transmit internal rate 0 */ + __be16 uptirr1_1; /* Device 1 transmit internal rate 1 */ + __be16 uptirr1_2; /* Device 1 transmit internal rate 2 */ + __be16 uptirr1_3; /* Device 1 transmit internal rate 3 */ + __be16 uptirr2_0; /* Device 2 transmit internal rate 0 */ + __be16 uptirr2_1; /* Device 2 transmit internal rate 1 */ + __be16 uptirr2_2; /* Device 2 transmit internal rate 2 */ + __be16 uptirr2_3; /* Device 2 transmit internal rate 3 */ + __be16 uptirr3_0; /* Device 3 transmit internal rate 0 */ + __be16 uptirr3_1; /* Device 3 transmit internal rate 1 */ + __be16 uptirr3_2; /* Device 3 transmit internal rate 2 */ + __be16 uptirr3_3; /* Device 3 transmit internal rate 3 */ + __be16 uptirr4_0; /* Device 4 transmit internal rate 0 */ + __be16 uptirr4_1; /* Device 4 transmit internal rate 1 */ + __be16 uptirr4_2; /* Device 4 transmit internal rate 2 */ + __be16 uptirr4_3; /* Device 4 transmit internal rate 3 */ + __be32 uper1; /* Device 1 port enable register */ + __be32 uper2; /* Device 2 port enable register */ + __be32 uper3; /* Device 3 port enable register */ + __be32 uper4; /* Device 4 port enable register */ + u8 res2[0x150]; +} __attribute__ ((packed)); + +/* SDMA */ +struct sdma { + __be32 sdsr; /* Serial DMA status register */ + __be32 sdmr; /* Serial DMA mode register */ + __be32 sdtr1; /* SDMA system bus threshold register */ + __be32 sdtr2; /* SDMA secondary bus threshold register */ + __be32 sdhy1; /* SDMA system bus hysteresis register */ + __be32 sdhy2; /* SDMA secondary bus hysteresis register */ + __be32 sdta1; /* SDMA system bus address register */ + __be32 sdta2; /* SDMA secondary bus address register */ + __be32 sdtm1; /* SDMA system bus MSNUM register */ + __be32 sdtm2; /* SDMA secondary bus MSNUM register */ + u8 res0[0x10]; + __be32 sdaqr; /* SDMA address bus qualify register */ + __be32 sdaqmr; /* SDMA address bus qualify mask register */ + u8 res1[0x4]; + __be32 sdebcr; /* SDMA CAM entries base register */ + u8 res2[0x38]; +} __attribute__ ((packed)); + +/* Debug Space */ +struct dbg { + __be32 bpdcr; /* Breakpoint debug command register */ + __be32 bpdsr; /* Breakpoint debug status register */ + __be32 bpdmr; /* Breakpoint debug mask register */ + __be32 bprmrr0; /* Breakpoint request mode risc register 0 */ + __be32 bprmrr1; /* Breakpoint request mode risc register 1 */ + u8 res0[0x8]; + __be32 bprmtr0; /* Breakpoint request mode trb register 0 */ + __be32 bprmtr1; /* Breakpoint request mode trb register 1 */ + u8 res1[0x8]; + __be32 bprmir; /* Breakpoint request mode immediate register */ + __be32 bprmsr; /* Breakpoint request mode serial register */ + __be32 bpemr; /* Breakpoint exit mode register */ + u8 res2[0x48]; +} __attribute__ ((packed)); + +/* + * RISC Special Registers (Trap and Breakpoint). These are described in + * the QE Developer's Handbook. + */ +struct rsp { + __be32 tibcr[16]; /* Trap/instruction breakpoint control regs */ + u8 res0[64]; + __be32 ibcr0; + __be32 ibs0; + __be32 ibcnr0; + u8 res1[4]; + __be32 ibcr1; + __be32 ibs1; + __be32 ibcnr1; + __be32 npcr; + __be32 dbcr; + __be32 dbar; + __be32 dbamr; + __be32 dbsr; + __be32 dbcnr; + u8 res2[12]; + __be32 dbdr_h; + __be32 dbdr_l; + __be32 dbdmr_h; + __be32 dbdmr_l; + __be32 bsr; + __be32 bor; + __be32 bior; + u8 res3[4]; + __be32 iatr[4]; + __be32 eccr; /* Exception control configuration register */ + __be32 eicr; + u8 res4[0x100-0xf8]; +} __attribute__ ((packed)); + +struct qe_immap { + struct qe_iram iram; /* I-RAM */ + struct qe_ic_regs ic; /* Interrupt Controller */ + struct cp_qe cp; /* Communications Processor */ + struct qe_mux qmx; /* QE Multiplexer */ + struct qe_timers qet; /* QE Timers */ + struct spi spi[0x2]; /* spi */ + struct qe_mcc mcc; /* mcc */ + struct qe_brg brg; /* brg */ + struct qe_usb_ctlr usb; /* USB */ + struct si1 si1; /* SI */ + u8 res11[0x800]; + struct sir sir; /* SI Routing Tables */ + struct ucc ucc1; /* ucc1 */ + struct ucc ucc3; /* ucc3 */ + struct ucc ucc5; /* ucc5 */ + struct ucc ucc7; /* ucc7 */ + u8 res12[0x600]; + struct upc upc1; /* MultiPHY UTOPIA POS Ctrlr 1*/ + struct ucc ucc2; /* ucc2 */ + struct ucc ucc4; /* ucc4 */ + struct ucc ucc6; /* ucc6 */ + struct ucc ucc8; /* ucc8 */ + u8 res13[0x600]; + struct upc upc2; /* MultiPHY UTOPIA POS Ctrlr 2*/ + struct sdma sdma; /* SDMA */ + struct dbg dbg; /* 0x104080 - 0x1040FF + Debug Space */ + struct rsp rsp[0x2]; /* 0x104100 - 0x1042FF + RISC Special Registers + (Trap and Breakpoint) */ + u8 res14[0x300]; /* 0x104300 - 0x1045FF */ + u8 res15[0x3A00]; /* 0x104600 - 0x107FFF */ + u8 res16[0x8000]; /* 0x108000 - 0x110000 */ + u8 muram[0xC000]; /* 0x110000 - 0x11C000 + Multi-user RAM */ + u8 res17[0x24000]; /* 0x11C000 - 0x140000 */ + u8 res18[0xC0000]; /* 0x140000 - 0x200000 */ +} __attribute__ ((packed)); + +extern struct qe_immap __iomem *qe_immr; + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_IMMAP_QE_H */ diff --git a/include/soc/fsl/qe/qe.h b/include/soc/fsl/qe/qe.h new file mode 100644 index 000000000..b02e9fe69 --- /dev/null +++ b/include/soc/fsl/qe/qe.h @@ -0,0 +1,811 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish <gridish@freescale.com> + * Li Yang <leoli@freescale.com> + * + * Description: + * QUICC Engine (QE) external definitions and structure. + */ +#ifndef _ASM_POWERPC_QE_H +#define _ASM_POWERPC_QE_H +#ifdef __KERNEL__ + +#include <linux/compiler.h> +#include <linux/genalloc.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <soc/fsl/cpm.h> +#include <soc/fsl/qe/immap_qe.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/types.h> + +#define QE_NUM_OF_SNUM 256 /* There are 256 serial number in QE */ +#define QE_NUM_OF_BRGS 16 +#define QE_NUM_OF_PORTS 1024 + +/* Clocks and BRGs */ +enum qe_clock { + QE_CLK_NONE = 0, + QE_BRG1, /* Baud Rate Generator 1 */ + QE_BRG2, /* Baud Rate Generator 2 */ + QE_BRG3, /* Baud Rate Generator 3 */ + QE_BRG4, /* Baud Rate Generator 4 */ + QE_BRG5, /* Baud Rate Generator 5 */ + QE_BRG6, /* Baud Rate Generator 6 */ + QE_BRG7, /* Baud Rate Generator 7 */ + QE_BRG8, /* Baud Rate Generator 8 */ + QE_BRG9, /* Baud Rate Generator 9 */ + QE_BRG10, /* Baud Rate Generator 10 */ + QE_BRG11, /* Baud Rate Generator 11 */ + QE_BRG12, /* Baud Rate Generator 12 */ + QE_BRG13, /* Baud Rate Generator 13 */ + QE_BRG14, /* Baud Rate Generator 14 */ + QE_BRG15, /* Baud Rate Generator 15 */ + QE_BRG16, /* Baud Rate Generator 16 */ + QE_CLK1, /* Clock 1 */ + QE_CLK2, /* Clock 2 */ + QE_CLK3, /* Clock 3 */ + QE_CLK4, /* Clock 4 */ + QE_CLK5, /* Clock 5 */ + QE_CLK6, /* Clock 6 */ + QE_CLK7, /* Clock 7 */ + QE_CLK8, /* Clock 8 */ + QE_CLK9, /* Clock 9 */ + QE_CLK10, /* Clock 10 */ + QE_CLK11, /* Clock 11 */ + QE_CLK12, /* Clock 12 */ + QE_CLK13, /* Clock 13 */ + QE_CLK14, /* Clock 14 */ + QE_CLK15, /* Clock 15 */ + QE_CLK16, /* Clock 16 */ + QE_CLK17, /* Clock 17 */ + QE_CLK18, /* Clock 18 */ + QE_CLK19, /* Clock 19 */ + QE_CLK20, /* Clock 20 */ + QE_CLK21, /* Clock 21 */ + QE_CLK22, /* Clock 22 */ + QE_CLK23, /* Clock 23 */ + QE_CLK24, /* Clock 24 */ + QE_RSYNC_PIN, /* RSYNC from pin */ + QE_TSYNC_PIN, /* TSYNC from pin */ + QE_CLK_DUMMY +}; + +static inline bool qe_clock_is_brg(enum qe_clock clk) +{ + return clk >= QE_BRG1 && clk <= QE_BRG16; +} + +extern spinlock_t cmxgcr_lock; + +/* Export QE common operations */ +#ifdef CONFIG_QUICC_ENGINE +extern void qe_reset(void); +#else +static inline void qe_reset(void) {} +#endif + +int cpm_muram_init(void); + +#if defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) +s32 cpm_muram_alloc(unsigned long size, unsigned long align); +void cpm_muram_free(s32 offset); +s32 cpm_muram_alloc_fixed(unsigned long offset, unsigned long size); +void __iomem *cpm_muram_addr(unsigned long offset); +unsigned long cpm_muram_offset(const void __iomem *addr); +dma_addr_t cpm_muram_dma(void __iomem *addr); +void cpm_muram_free_addr(const void __iomem *addr); +#else +static inline s32 cpm_muram_alloc(unsigned long size, + unsigned long align) +{ + return -ENOSYS; +} + +static inline void cpm_muram_free(s32 offset) +{ +} + +static inline s32 cpm_muram_alloc_fixed(unsigned long offset, + unsigned long size) +{ + return -ENOSYS; +} + +static inline void __iomem *cpm_muram_addr(unsigned long offset) +{ + return NULL; +} + +static inline unsigned long cpm_muram_offset(const void __iomem *addr) +{ + return -ENOSYS; +} + +static inline dma_addr_t cpm_muram_dma(void __iomem *addr) +{ + return 0; +} +static inline void cpm_muram_free_addr(const void __iomem *addr) +{ +} +#endif /* defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) */ + +/* QE PIO */ +#define QE_PIO_PINS 32 + +struct qe_pio_regs { + __be32 cpodr; /* Open drain register */ + __be32 cpdata; /* Data register */ + __be32 cpdir1; /* Direction register */ + __be32 cpdir2; /* Direction register */ + __be32 cppar1; /* Pin assignment register */ + __be32 cppar2; /* Pin assignment register */ +#ifdef CONFIG_PPC_85xx + u8 pad[8]; +#endif +}; + +#define QE_PIO_DIR_IN 2 +#define QE_PIO_DIR_OUT 1 +extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, + int dir, int open_drain, int assignment, + int has_irq); +#ifdef CONFIG_QUICC_ENGINE +extern int par_io_init(struct device_node *np); +extern int par_io_of_config(struct device_node *np); +extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, + int assignment, int has_irq); +extern int par_io_data_set(u8 port, u8 pin, u8 val); +#else +static inline int par_io_init(struct device_node *np) { return -ENOSYS; } +static inline int par_io_of_config(struct device_node *np) { return -ENOSYS; } +static inline int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, + int assignment, int has_irq) { return -ENOSYS; } +static inline int par_io_data_set(u8 port, u8 pin, u8 val) { return -ENOSYS; } +#endif /* CONFIG_QUICC_ENGINE */ + +/* + * Pin multiplexing functions. + */ +struct qe_pin; +#ifdef CONFIG_QE_GPIO +extern struct qe_pin *qe_pin_request(struct device_node *np, int index); +extern void qe_pin_free(struct qe_pin *qe_pin); +extern void qe_pin_set_gpio(struct qe_pin *qe_pin); +extern void qe_pin_set_dedicated(struct qe_pin *pin); +#else +static inline struct qe_pin *qe_pin_request(struct device_node *np, int index) +{ + return ERR_PTR(-ENOSYS); +} +static inline void qe_pin_free(struct qe_pin *qe_pin) {} +static inline void qe_pin_set_gpio(struct qe_pin *qe_pin) {} +static inline void qe_pin_set_dedicated(struct qe_pin *pin) {} +#endif /* CONFIG_QE_GPIO */ + +#ifdef CONFIG_QUICC_ENGINE +int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input); +#else +static inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, + u32 cmd_input) +{ + return -ENOSYS; +} +#endif /* CONFIG_QUICC_ENGINE */ + +/* QE internal API */ +enum qe_clock qe_clock_source(const char *source); +unsigned int qe_get_brg_clk(void); +int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier); +int qe_get_snum(void); +void qe_put_snum(u8 snum); +unsigned int qe_get_num_of_risc(void); +unsigned int qe_get_num_of_snums(void); + +static inline int qe_alive_during_sleep(void) +{ + /* + * MPC8568E reference manual says: + * + * "...power down sequence waits for all I/O interfaces to become idle. + * In some applications this may happen eventually without actively + * shutting down interfaces, but most likely, software will have to + * take steps to shut down the eTSEC, QUICC Engine Block, and PCI + * interfaces before issuing the command (either the write to the core + * MSR[WE] as described above or writing to POWMGTCSR) to put the + * device into sleep state." + * + * MPC8569E reference manual has a similar paragraph. + */ +#ifdef CONFIG_PPC_85xx + return 0; +#else + return 1; +#endif +} + +/* we actually use cpm_muram implementation, define this for convenience */ +#define qe_muram_init cpm_muram_init +#define qe_muram_alloc cpm_muram_alloc +#define qe_muram_alloc_fixed cpm_muram_alloc_fixed +#define qe_muram_free cpm_muram_free +#define qe_muram_addr cpm_muram_addr +#define qe_muram_offset cpm_muram_offset +#define qe_muram_dma cpm_muram_dma +#define qe_muram_free_addr cpm_muram_free_addr + +#define qe_setbits_be32(_addr, _v) iowrite32be(ioread32be(_addr) | (_v), (_addr)) +#define qe_clrbits_be32(_addr, _v) iowrite32be(ioread32be(_addr) & ~(_v), (_addr)) + +#define qe_setbits_be16(_addr, _v) iowrite16be(ioread16be(_addr) | (_v), (_addr)) +#define qe_clrbits_be16(_addr, _v) iowrite16be(ioread16be(_addr) & ~(_v), (_addr)) + +#define qe_setbits_8(_addr, _v) iowrite8(ioread8(_addr) | (_v), (_addr)) +#define qe_clrbits_8(_addr, _v) iowrite8(ioread8(_addr) & ~(_v), (_addr)) + +#define qe_clrsetbits_be32(addr, clear, set) \ + iowrite32be((ioread32be(addr) & ~(clear)) | (set), (addr)) +#define qe_clrsetbits_be16(addr, clear, set) \ + iowrite16be((ioread16be(addr) & ~(clear)) | (set), (addr)) +#define qe_clrsetbits_8(addr, clear, set) \ + iowrite8((ioread8(addr) & ~(clear)) | (set), (addr)) + +/* Structure that defines QE firmware binary files. + * + * See Documentation/powerpc/qe_firmware.rst for a description of these + * fields. + */ +struct qe_firmware { + struct qe_header { + __be32 length; /* Length of the entire structure, in bytes */ + u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */ + u8 version; /* Version of this layout. First ver is '1' */ + } header; + u8 id[62]; /* Null-terminated identifier string */ + u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */ + u8 count; /* Number of microcode[] structures */ + struct { + __be16 model; /* The SOC model */ + u8 major; /* The SOC revision major */ + u8 minor; /* The SOC revision minor */ + } __attribute__ ((packed)) soc; + u8 padding[4]; /* Reserved, for alignment */ + __be64 extended_modes; /* Extended modes */ + __be32 vtraps[8]; /* Virtual trap addresses */ + u8 reserved[4]; /* Reserved, for future expansion */ + struct qe_microcode { + u8 id[32]; /* Null-terminated identifier */ + __be32 traps[16]; /* Trap addresses, 0 == ignore */ + __be32 eccr; /* The value for the ECCR register */ + __be32 iram_offset; /* Offset into I-RAM for the code */ + __be32 count; /* Number of 32-bit words of the code */ + __be32 code_offset; /* Offset of the actual microcode */ + u8 major; /* The microcode version major */ + u8 minor; /* The microcode version minor */ + u8 revision; /* The microcode version revision */ + u8 padding; /* Reserved, for alignment */ + u8 reserved[4]; /* Reserved, for future expansion */ + } __packed microcode[]; + /* All microcode binaries should be located here */ + /* CRC32 should be located here, after the microcode binaries */ +} __attribute__ ((packed)); + +struct qe_firmware_info { + char id[64]; /* Firmware name */ + u32 vtraps[8]; /* Virtual trap addresses */ + u64 extended_modes; /* Extended modes */ +}; + +#ifdef CONFIG_QUICC_ENGINE +/* Upload a firmware to the QE */ +int qe_upload_firmware(const struct qe_firmware *firmware); +#else +static inline int qe_upload_firmware(const struct qe_firmware *firmware) +{ + return -ENOSYS; +} +#endif /* CONFIG_QUICC_ENGINE */ + +/* Obtain information on the uploaded firmware */ +struct qe_firmware_info *qe_get_firmware_info(void); + +/* QE USB */ +int qe_usb_clock_set(enum qe_clock clk, int rate); + +/* Buffer descriptors */ +struct qe_bd { + __be16 status; + __be16 length; + __be32 buf; +} __attribute__ ((packed)); + +#define BD_STATUS_MASK 0xffff0000 +#define BD_LENGTH_MASK 0x0000ffff + +/* Alignment */ +#define QE_INTR_TABLE_ALIGN 16 /* ??? */ +#define QE_ALIGNMENT_OF_BD 8 +#define QE_ALIGNMENT_OF_PRAM 64 + +/* RISC allocation */ +#define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */ +#define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */ +#define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */ +#define QE_RISC_ALLOCATION_RISC4 0x8 /* RISC 4 */ +#define QE_RISC_ALLOCATION_RISC1_AND_RISC2 (QE_RISC_ALLOCATION_RISC1 | \ + QE_RISC_ALLOCATION_RISC2) +#define QE_RISC_ALLOCATION_FOUR_RISCS (QE_RISC_ALLOCATION_RISC1 | \ + QE_RISC_ALLOCATION_RISC2 | \ + QE_RISC_ALLOCATION_RISC3 | \ + QE_RISC_ALLOCATION_RISC4) + +/* QE extended filtering Table Lookup Key Size */ +enum qe_fltr_tbl_lookup_key_size { + QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES + = 0x3f, /* LookupKey parsed by the Generate LookupKey + CMD is truncated to 8 bytes */ + QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES + = 0x5f, /* LookupKey parsed by the Generate LookupKey + CMD is truncated to 16 bytes */ +}; + +/* QE FLTR extended filtering Largest External Table Lookup Key Size */ +enum qe_fltr_largest_external_tbl_lookup_key_size { + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE + = 0x0,/* not used */ + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES + = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */ + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES + = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */ +}; + +/* structure representing QE parameter RAM */ +struct qe_timer_tables { + u16 tm_base; /* QE timer table base adr */ + u16 tm_ptr; /* QE timer table pointer */ + u16 r_tmr; /* QE timer mode register */ + u16 r_tmv; /* QE timer valid register */ + u32 tm_cmd; /* QE timer cmd register */ + u32 tm_cnt; /* QE timer internal cnt */ +} __attribute__ ((packed)); + +#define QE_FLTR_TAD_SIZE 8 + +/* QE extended filtering Termination Action Descriptor (TAD) */ +struct qe_fltr_tad { + u8 serialized[QE_FLTR_TAD_SIZE]; +} __attribute__ ((packed)); + +/* Communication Direction */ +enum comm_dir { + COMM_DIR_NONE = 0, + COMM_DIR_RX = 1, + COMM_DIR_TX = 2, + COMM_DIR_RX_AND_TX = 3 +}; + +/* QE CMXUCR Registers. + * There are two UCCs represented in each of the four CMXUCR registers. + * These values are for the UCC in the LSBs + */ +#define QE_CMXUCR_MII_ENET_MNG 0x00007000 +#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12 +#define QE_CMXUCR_GRANT 0x00008000 +#define QE_CMXUCR_TSA 0x00004000 +#define QE_CMXUCR_BKPT 0x00000100 +#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F + +/* QE CMXGCR Registers. +*/ +#define QE_CMXGCR_MII_ENET_MNG 0x00007000 +#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12 +#define QE_CMXGCR_USBCS 0x0000000f +#define QE_CMXGCR_USBCS_CLK3 0x1 +#define QE_CMXGCR_USBCS_CLK5 0x2 +#define QE_CMXGCR_USBCS_CLK7 0x3 +#define QE_CMXGCR_USBCS_CLK9 0x4 +#define QE_CMXGCR_USBCS_CLK13 0x5 +#define QE_CMXGCR_USBCS_CLK17 0x6 +#define QE_CMXGCR_USBCS_CLK19 0x7 +#define QE_CMXGCR_USBCS_CLK21 0x8 +#define QE_CMXGCR_USBCS_BRG9 0x9 +#define QE_CMXGCR_USBCS_BRG10 0xa + +/* QE CECR Commands. +*/ +#define QE_CR_FLG 0x00010000 +#define QE_RESET 0x80000000 +#define QE_INIT_TX_RX 0x00000000 +#define QE_INIT_RX 0x00000001 +#define QE_INIT_TX 0x00000002 +#define QE_ENTER_HUNT_MODE 0x00000003 +#define QE_STOP_TX 0x00000004 +#define QE_GRACEFUL_STOP_TX 0x00000005 +#define QE_RESTART_TX 0x00000006 +#define QE_CLOSE_RX_BD 0x00000007 +#define QE_SWITCH_COMMAND 0x00000007 +#define QE_SET_GROUP_ADDRESS 0x00000008 +#define QE_START_IDMA 0x00000009 +#define QE_MCC_STOP_RX 0x00000009 +#define QE_ATM_TRANSMIT 0x0000000a +#define QE_HPAC_CLEAR_ALL 0x0000000b +#define QE_GRACEFUL_STOP_RX 0x0000001a +#define QE_RESTART_RX 0x0000001b +#define QE_HPAC_SET_PRIORITY 0x0000010b +#define QE_HPAC_STOP_TX 0x0000020b +#define QE_HPAC_STOP_RX 0x0000030b +#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b +#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b +#define QE_HPAC_START_TX 0x0000060b +#define QE_HPAC_START_RX 0x0000070b +#define QE_USB_STOP_TX 0x0000000a +#define QE_USB_RESTART_TX 0x0000000c +#define QE_QMC_STOP_TX 0x0000000c +#define QE_QMC_STOP_RX 0x0000000d +#define QE_SS7_SU_FIL_RESET 0x0000000e +/* jonathbr added from here down for 83xx */ +#define QE_RESET_BCS 0x0000000a +#define QE_MCC_INIT_TX_RX_16 0x00000003 +#define QE_MCC_STOP_TX 0x00000004 +#define QE_MCC_INIT_TX_1 0x00000005 +#define QE_MCC_INIT_RX_1 0x00000006 +#define QE_MCC_RESET 0x00000007 +#define QE_SET_TIMER 0x00000008 +#define QE_RANDOM_NUMBER 0x0000000c +#define QE_ATM_MULTI_THREAD_INIT 0x00000011 +#define QE_ASSIGN_PAGE 0x00000012 +#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013 +#define QE_START_FLOW_CONTROL 0x00000014 +#define QE_STOP_FLOW_CONTROL 0x00000015 +#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016 + +#define QE_ASSIGN_RISC 0x00000010 +#define QE_CR_MCN_NORMAL_SHIFT 6 +#define QE_CR_MCN_USB_SHIFT 4 +#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8 +#define QE_CR_SNUM_SHIFT 17 + +/* QE CECR Sub Block - sub block of QE command. +*/ +#define QE_CR_SUBBLOCK_INVALID 0x00000000 +#define QE_CR_SUBBLOCK_USB 0x03200000 +#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000 +#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000 +#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000 +#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000 +#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000 +#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000 +#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000 +#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000 +#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000 +#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000 +#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000 +#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000 +#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000 +#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000 +#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000 +#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000 +#define QE_CR_SUBBLOCK_MCC1 0x03800000 +#define QE_CR_SUBBLOCK_MCC2 0x03a00000 +#define QE_CR_SUBBLOCK_MCC3 0x03000000 +#define QE_CR_SUBBLOCK_IDMA1 0x02800000 +#define QE_CR_SUBBLOCK_IDMA2 0x02a00000 +#define QE_CR_SUBBLOCK_IDMA3 0x02c00000 +#define QE_CR_SUBBLOCK_IDMA4 0x02e00000 +#define QE_CR_SUBBLOCK_HPAC 0x01e00000 +#define QE_CR_SUBBLOCK_SPI1 0x01400000 +#define QE_CR_SUBBLOCK_SPI2 0x01600000 +#define QE_CR_SUBBLOCK_RAND 0x01c00000 +#define QE_CR_SUBBLOCK_TIMER 0x01e00000 +#define QE_CR_SUBBLOCK_GENERAL 0x03c00000 + +/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */ +#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */ +#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00 +#define QE_CR_PROTOCOL_QMC 0x02 +#define QE_CR_PROTOCOL_UART 0x04 +#define QE_CR_PROTOCOL_ATM_POS 0x0A +#define QE_CR_PROTOCOL_ETHERNET 0x0C +#define QE_CR_PROTOCOL_L2_SWITCH 0x0D + +/* BRG configuration register */ +#define QE_BRGC_ENABLE 0x00010000 +#define QE_BRGC_DIVISOR_SHIFT 1 +#define QE_BRGC_DIVISOR_MAX 0xFFF +#define QE_BRGC_DIV16 1 + +/* QE Timers registers */ +#define QE_GTCFR1_PCAS 0x80 +#define QE_GTCFR1_STP2 0x20 +#define QE_GTCFR1_RST2 0x10 +#define QE_GTCFR1_GM2 0x08 +#define QE_GTCFR1_GM1 0x04 +#define QE_GTCFR1_STP1 0x02 +#define QE_GTCFR1_RST1 0x01 + +/* SDMA registers */ +#define QE_SDSR_BER1 0x02000000 +#define QE_SDSR_BER2 0x01000000 + +#define QE_SDMR_GLB_1_MSK 0x80000000 +#define QE_SDMR_ADR_SEL 0x20000000 +#define QE_SDMR_BER1_MSK 0x02000000 +#define QE_SDMR_BER2_MSK 0x01000000 +#define QE_SDMR_EB1_MSK 0x00800000 +#define QE_SDMR_ER1_MSK 0x00080000 +#define QE_SDMR_ER2_MSK 0x00040000 +#define QE_SDMR_CEN_MASK 0x0000E000 +#define QE_SDMR_SBER_1 0x00000200 +#define QE_SDMR_SBER_2 0x00000200 +#define QE_SDMR_EB1_PR_MASK 0x000000C0 +#define QE_SDMR_ER1_PR 0x00000008 + +#define QE_SDMR_CEN_SHIFT 13 +#define QE_SDMR_EB1_PR_SHIFT 6 + +#define QE_SDTM_MSNUM_SHIFT 24 + +#define QE_SDEBCR_BA_MASK 0x01FFFFFF + +/* Communication Processor */ +#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */ +#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */ +#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */ + +/* I-RAM */ +#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */ +#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */ +#define QE_IRAM_READY 0x80000000 /* Ready */ + +/* UPC */ +#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */ +#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */ +#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */ +#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */ +#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */ + +/* UCC GUEMR register */ +#define UCC_GUEMR_MODE_MASK_RX 0x02 +#define UCC_GUEMR_MODE_FAST_RX 0x02 +#define UCC_GUEMR_MODE_SLOW_RX 0x00 +#define UCC_GUEMR_MODE_MASK_TX 0x01 +#define UCC_GUEMR_MODE_FAST_TX 0x01 +#define UCC_GUEMR_MODE_SLOW_TX 0x00 +#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX) +#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but + must be set 1 */ + +/* structure representing UCC SLOW parameter RAM */ +struct ucc_slow_pram { + __be16 rbase; /* RX BD base address */ + __be16 tbase; /* TX BD base address */ + u8 rbmr; /* RX bus mode register (same as CPM's RFCR) */ + u8 tbmr; /* TX bus mode register (same as CPM's TFCR) */ + __be16 mrblr; /* Rx buffer length */ + __be32 rstate; /* Rx internal state */ + __be32 rptr; /* Rx internal data pointer */ + __be16 rbptr; /* rb BD Pointer */ + __be16 rcount; /* Rx internal byte count */ + __be32 rtemp; /* Rx temp */ + __be32 tstate; /* Tx internal state */ + __be32 tptr; /* Tx internal data pointer */ + __be16 tbptr; /* Tx BD pointer */ + __be16 tcount; /* Tx byte count */ + __be32 ttemp; /* Tx temp */ + __be32 rcrc; /* temp receive CRC */ + __be32 tcrc; /* temp transmit CRC */ +} __attribute__ ((packed)); + +/* General UCC SLOW Mode Register (GUMRH & GUMRL) */ +#define UCC_SLOW_GUMR_H_SAM_QMC 0x00000000 +#define UCC_SLOW_GUMR_H_SAM_SATM 0x00008000 +#define UCC_SLOW_GUMR_H_REVD 0x00002000 +#define UCC_SLOW_GUMR_H_TRX 0x00001000 +#define UCC_SLOW_GUMR_H_TTX 0x00000800 +#define UCC_SLOW_GUMR_H_CDP 0x00000400 +#define UCC_SLOW_GUMR_H_CTSP 0x00000200 +#define UCC_SLOW_GUMR_H_CDS 0x00000100 +#define UCC_SLOW_GUMR_H_CTSS 0x00000080 +#define UCC_SLOW_GUMR_H_TFL 0x00000040 +#define UCC_SLOW_GUMR_H_RFW 0x00000020 +#define UCC_SLOW_GUMR_H_TXSY 0x00000010 +#define UCC_SLOW_GUMR_H_4SYNC 0x00000004 +#define UCC_SLOW_GUMR_H_8SYNC 0x00000008 +#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c +#define UCC_SLOW_GUMR_H_RTSM 0x00000002 +#define UCC_SLOW_GUMR_H_RSYN 0x00000001 + +#define UCC_SLOW_GUMR_L_TCI 0x10000000 +#define UCC_SLOW_GUMR_L_RINV 0x02000000 +#define UCC_SLOW_GUMR_L_TINV 0x01000000 +#define UCC_SLOW_GUMR_L_TEND 0x00040000 +#define UCC_SLOW_GUMR_L_TDCR_MASK 0x00030000 +#define UCC_SLOW_GUMR_L_TDCR_32 0x00030000 +#define UCC_SLOW_GUMR_L_TDCR_16 0x00020000 +#define UCC_SLOW_GUMR_L_TDCR_8 0x00010000 +#define UCC_SLOW_GUMR_L_TDCR_1 0x00000000 +#define UCC_SLOW_GUMR_L_RDCR_MASK 0x0000c000 +#define UCC_SLOW_GUMR_L_RDCR_32 0x0000c000 +#define UCC_SLOW_GUMR_L_RDCR_16 0x00008000 +#define UCC_SLOW_GUMR_L_RDCR_8 0x00004000 +#define UCC_SLOW_GUMR_L_RDCR_1 0x00000000 +#define UCC_SLOW_GUMR_L_RENC_NRZI 0x00000800 +#define UCC_SLOW_GUMR_L_RENC_NRZ 0x00000000 +#define UCC_SLOW_GUMR_L_TENC_NRZI 0x00000100 +#define UCC_SLOW_GUMR_L_TENC_NRZ 0x00000000 +#define UCC_SLOW_GUMR_L_DIAG_MASK 0x000000c0 +#define UCC_SLOW_GUMR_L_DIAG_LE 0x000000c0 +#define UCC_SLOW_GUMR_L_DIAG_ECHO 0x00000080 +#define UCC_SLOW_GUMR_L_DIAG_LOOP 0x00000040 +#define UCC_SLOW_GUMR_L_DIAG_NORM 0x00000000 +#define UCC_SLOW_GUMR_L_ENR 0x00000020 +#define UCC_SLOW_GUMR_L_ENT 0x00000010 +#define UCC_SLOW_GUMR_L_MODE_MASK 0x0000000F +#define UCC_SLOW_GUMR_L_MODE_BISYNC 0x00000008 +#define UCC_SLOW_GUMR_L_MODE_AHDLC 0x00000006 +#define UCC_SLOW_GUMR_L_MODE_UART 0x00000004 +#define UCC_SLOW_GUMR_L_MODE_QMC 0x00000002 + +/* General UCC FAST Mode Register */ +#define UCC_FAST_GUMR_LOOPBACK 0x40000000 +#define UCC_FAST_GUMR_TCI 0x20000000 +#define UCC_FAST_GUMR_TRX 0x10000000 +#define UCC_FAST_GUMR_TTX 0x08000000 +#define UCC_FAST_GUMR_CDP 0x04000000 +#define UCC_FAST_GUMR_CTSP 0x02000000 +#define UCC_FAST_GUMR_CDS 0x01000000 +#define UCC_FAST_GUMR_CTSS 0x00800000 +#define UCC_FAST_GUMR_TXSY 0x00020000 +#define UCC_FAST_GUMR_RSYN 0x00010000 +#define UCC_FAST_GUMR_SYNL_MASK 0x0000C000 +#define UCC_FAST_GUMR_SYNL_16 0x0000C000 +#define UCC_FAST_GUMR_SYNL_8 0x00008000 +#define UCC_FAST_GUMR_SYNL_AUTO 0x00004000 +#define UCC_FAST_GUMR_RTSM 0x00002000 +#define UCC_FAST_GUMR_REVD 0x00000400 +#define UCC_FAST_GUMR_ENR 0x00000020 +#define UCC_FAST_GUMR_ENT 0x00000010 + +/* UART Slow UCC Event Register (UCCE) */ +#define UCC_UART_UCCE_AB 0x0200 +#define UCC_UART_UCCE_IDLE 0x0100 +#define UCC_UART_UCCE_GRA 0x0080 +#define UCC_UART_UCCE_BRKE 0x0040 +#define UCC_UART_UCCE_BRKS 0x0020 +#define UCC_UART_UCCE_CCR 0x0008 +#define UCC_UART_UCCE_BSY 0x0004 +#define UCC_UART_UCCE_TX 0x0002 +#define UCC_UART_UCCE_RX 0x0001 + +/* HDLC Slow UCC Event Register (UCCE) */ +#define UCC_HDLC_UCCE_GLR 0x1000 +#define UCC_HDLC_UCCE_GLT 0x0800 +#define UCC_HDLC_UCCE_IDLE 0x0100 +#define UCC_HDLC_UCCE_BRKE 0x0040 +#define UCC_HDLC_UCCE_BRKS 0x0020 +#define UCC_HDLC_UCCE_TXE 0x0010 +#define UCC_HDLC_UCCE_RXF 0x0008 +#define UCC_HDLC_UCCE_BSY 0x0004 +#define UCC_HDLC_UCCE_TXB 0x0002 +#define UCC_HDLC_UCCE_RXB 0x0001 + +/* BISYNC Slow UCC Event Register (UCCE) */ +#define UCC_BISYNC_UCCE_GRA 0x0080 +#define UCC_BISYNC_UCCE_TXE 0x0010 +#define UCC_BISYNC_UCCE_RCH 0x0008 +#define UCC_BISYNC_UCCE_BSY 0x0004 +#define UCC_BISYNC_UCCE_TXB 0x0002 +#define UCC_BISYNC_UCCE_RXB 0x0001 + +/* Gigabit Ethernet Fast UCC Event Register (UCCE) */ +#define UCC_GETH_UCCE_MPD 0x80000000 +#define UCC_GETH_UCCE_SCAR 0x40000000 +#define UCC_GETH_UCCE_GRA 0x20000000 +#define UCC_GETH_UCCE_CBPR 0x10000000 +#define UCC_GETH_UCCE_BSY 0x08000000 +#define UCC_GETH_UCCE_RXC 0x04000000 +#define UCC_GETH_UCCE_TXC 0x02000000 +#define UCC_GETH_UCCE_TXE 0x01000000 +#define UCC_GETH_UCCE_TXB7 0x00800000 +#define UCC_GETH_UCCE_TXB6 0x00400000 +#define UCC_GETH_UCCE_TXB5 0x00200000 +#define UCC_GETH_UCCE_TXB4 0x00100000 +#define UCC_GETH_UCCE_TXB3 0x00080000 +#define UCC_GETH_UCCE_TXB2 0x00040000 +#define UCC_GETH_UCCE_TXB1 0x00020000 +#define UCC_GETH_UCCE_TXB0 0x00010000 +#define UCC_GETH_UCCE_RXB7 0x00008000 +#define UCC_GETH_UCCE_RXB6 0x00004000 +#define UCC_GETH_UCCE_RXB5 0x00002000 +#define UCC_GETH_UCCE_RXB4 0x00001000 +#define UCC_GETH_UCCE_RXB3 0x00000800 +#define UCC_GETH_UCCE_RXB2 0x00000400 +#define UCC_GETH_UCCE_RXB1 0x00000200 +#define UCC_GETH_UCCE_RXB0 0x00000100 +#define UCC_GETH_UCCE_RXF7 0x00000080 +#define UCC_GETH_UCCE_RXF6 0x00000040 +#define UCC_GETH_UCCE_RXF5 0x00000020 +#define UCC_GETH_UCCE_RXF4 0x00000010 +#define UCC_GETH_UCCE_RXF3 0x00000008 +#define UCC_GETH_UCCE_RXF2 0x00000004 +#define UCC_GETH_UCCE_RXF1 0x00000002 +#define UCC_GETH_UCCE_RXF0 0x00000001 + +/* UCC Protocol Specific Mode Register (UPSMR), when used for UART */ +#define UCC_UART_UPSMR_FLC 0x8000 +#define UCC_UART_UPSMR_SL 0x4000 +#define UCC_UART_UPSMR_CL_MASK 0x3000 +#define UCC_UART_UPSMR_CL_8 0x3000 +#define UCC_UART_UPSMR_CL_7 0x2000 +#define UCC_UART_UPSMR_CL_6 0x1000 +#define UCC_UART_UPSMR_CL_5 0x0000 +#define UCC_UART_UPSMR_UM_MASK 0x0c00 +#define UCC_UART_UPSMR_UM_NORMAL 0x0000 +#define UCC_UART_UPSMR_UM_MAN_MULTI 0x0400 +#define UCC_UART_UPSMR_UM_AUTO_MULTI 0x0c00 +#define UCC_UART_UPSMR_FRZ 0x0200 +#define UCC_UART_UPSMR_RZS 0x0100 +#define UCC_UART_UPSMR_SYN 0x0080 +#define UCC_UART_UPSMR_DRT 0x0040 +#define UCC_UART_UPSMR_PEN 0x0010 +#define UCC_UART_UPSMR_RPM_MASK 0x000c +#define UCC_UART_UPSMR_RPM_ODD 0x0000 +#define UCC_UART_UPSMR_RPM_LOW 0x0004 +#define UCC_UART_UPSMR_RPM_EVEN 0x0008 +#define UCC_UART_UPSMR_RPM_HIGH 0x000C +#define UCC_UART_UPSMR_TPM_MASK 0x0003 +#define UCC_UART_UPSMR_TPM_ODD 0x0000 +#define UCC_UART_UPSMR_TPM_LOW 0x0001 +#define UCC_UART_UPSMR_TPM_EVEN 0x0002 +#define UCC_UART_UPSMR_TPM_HIGH 0x0003 + +/* UCC Protocol Specific Mode Register (UPSMR), when used for Ethernet */ +#define UCC_GETH_UPSMR_FTFE 0x80000000 +#define UCC_GETH_UPSMR_PTPE 0x40000000 +#define UCC_GETH_UPSMR_ECM 0x04000000 +#define UCC_GETH_UPSMR_HSE 0x02000000 +#define UCC_GETH_UPSMR_PRO 0x00400000 +#define UCC_GETH_UPSMR_CAP 0x00200000 +#define UCC_GETH_UPSMR_RSH 0x00100000 +#define UCC_GETH_UPSMR_RPM 0x00080000 +#define UCC_GETH_UPSMR_R10M 0x00040000 +#define UCC_GETH_UPSMR_RLPB 0x00020000 +#define UCC_GETH_UPSMR_TBIM 0x00010000 +#define UCC_GETH_UPSMR_RES1 0x00002000 +#define UCC_GETH_UPSMR_RMM 0x00001000 +#define UCC_GETH_UPSMR_CAM 0x00000400 +#define UCC_GETH_UPSMR_BRO 0x00000200 +#define UCC_GETH_UPSMR_SMM 0x00000080 +#define UCC_GETH_UPSMR_SGMM 0x00000020 + +/* UCC Protocol Specific Mode Register (UPSMR), when used for HDLC */ +#define UCC_HDLC_UPSMR_RTE 0x02000000 +#define UCC_HDLC_UPSMR_BUS 0x00200000 +#define UCC_HDLC_UPSMR_CW8 0x00007000 + +/* UCC Transmit On Demand Register (UTODR) */ +#define UCC_SLOW_TOD 0x8000 +#define UCC_FAST_TOD 0x8000 + +/* UCC Bus Mode Register masks */ +/* Not to be confused with the Bundle Mode Register */ +#define UCC_BMR_GBL 0x20 +#define UCC_BMR_BO_BE 0x10 +#define UCC_BMR_CETM 0x04 +#define UCC_BMR_DTB 0x02 +#define UCC_BMR_BDB 0x01 + +/* Function code masks */ +#define FC_GBL 0x20 +#define FC_DTB_LCL 0x02 +#define UCC_FAST_FUNCTION_CODE_GBL 0x20 +#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02 +#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01 + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_QE_H */ diff --git a/include/soc/fsl/qe/qe_tdm.h b/include/soc/fsl/qe/qe_tdm.h new file mode 100644 index 000000000..43ea830cf --- /dev/null +++ b/include/soc/fsl/qe/qe_tdm.h @@ -0,0 +1,92 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Internal header file for QE TDM mode routines. + * + * Copyright (C) 2016 Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Zhao Qiang <qiang.zhao@nxp.com> + */ + +#ifndef _QE_TDM_H_ +#define _QE_TDM_H_ + +#include <linux/list.h> +#include <linux/types.h> + +#include <soc/fsl/qe/immap_qe.h> +#include <soc/fsl/qe/qe.h> + +#include <soc/fsl/qe/ucc.h> +#include <soc/fsl/qe/ucc_fast.h> + +struct device_node; + +/* SI RAM entries */ +#define SIR_LAST 0x0001 +#define SIR_BYTE 0x0002 +#define SIR_CNT(x) ((x) << 2) +#define SIR_CSEL(x) ((x) << 5) +#define SIR_SGS 0x0200 +#define SIR_SWTR 0x4000 +#define SIR_MCC 0x8000 +#define SIR_IDLE 0 + +/* SIxMR fields */ +#define SIMR_SAD(x) ((x) << 12) +#define SIMR_SDM_NORMAL 0x0000 +#define SIMR_SDM_INTERNAL_LOOPBACK 0x0800 +#define SIMR_SDM_MASK 0x0c00 +#define SIMR_CRT 0x0040 +#define SIMR_SL 0x0020 +#define SIMR_CE 0x0010 +#define SIMR_FE 0x0008 +#define SIMR_GM 0x0004 +#define SIMR_TFSD(n) (n) +#define SIMR_RFSD(n) ((n) << 8) + +enum tdm_ts_t { + TDM_TX_TS, + TDM_RX_TS +}; + +enum tdm_framer_t { + TDM_FRAMER_T1, + TDM_FRAMER_E1 +}; + +enum tdm_mode_t { + TDM_INTERNAL_LOOPBACK, + TDM_NORMAL +}; + +struct si_mode_info { + u8 simr_rfsd; + u8 simr_tfsd; + u8 simr_crt; + u8 simr_sl; + u8 simr_ce; + u8 simr_fe; + u8 simr_gm; +}; + +struct ucc_tdm_info { + struct ucc_fast_info uf_info; + struct si_mode_info si_info; +}; + +struct ucc_tdm { + u16 tdm_port; /* port for this tdm:TDMA,TDMB */ + u32 siram_entry_id; + u16 __iomem *siram; + struct si1 __iomem *si_regs; + enum tdm_framer_t tdm_framer_type; + enum tdm_mode_t tdm_mode; + u8 num_of_ts; /* the number of timeslots in this tdm frame */ + u32 tx_ts_mask; /* tx time slot mask */ + u32 rx_ts_mask; /* rx time slot mask */ +}; + +int ucc_of_parse_tdm(struct device_node *np, struct ucc_tdm *utdm, + struct ucc_tdm_info *ut_info); +void ucc_tdm_init(struct ucc_tdm *utdm, struct ucc_tdm_info *ut_info); +#endif diff --git a/include/soc/fsl/qe/ucc.h b/include/soc/fsl/qe/ucc.h new file mode 100644 index 000000000..09e71557a --- /dev/null +++ b/include/soc/fsl/qe/ucc.h @@ -0,0 +1,64 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish <gridish@freescale.com> + * Li Yang <leoli@freescale.com> + * + * Description: + * Internal header file for UCC unit routines. + */ +#ifndef __UCC_H__ +#define __UCC_H__ + +#include <soc/fsl/qe/immap_qe.h> +#include <soc/fsl/qe/qe.h> + +#define STATISTICS + +#define UCC_MAX_NUM 8 + +/* Slow or fast type for UCCs. +*/ +enum ucc_speed_type { + UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX, + UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX +}; + +/* ucc_set_type + * Sets UCC to slow or fast mode. + * + * ucc_num - (In) number of UCC (0-7). + * speed - (In) slow or fast mode for UCC. + */ +int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed); + +int ucc_set_qe_mux_mii_mng(unsigned int ucc_num); + +int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock, + enum comm_dir mode); +int ucc_set_tdm_rxtx_clk(unsigned int tdm_num, enum qe_clock clock, + enum comm_dir mode); +int ucc_set_tdm_rxtx_sync(unsigned int tdm_num, enum qe_clock clock, + enum comm_dir mode); + +int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask); + +/* QE MUX clock routing for UCC +*/ +static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set) +{ + return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT); +} + +static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set) +{ + return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA); +} + +static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set) +{ + return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT); +} + +#endif /* __UCC_H__ */ diff --git a/include/soc/fsl/qe/ucc_fast.h b/include/soc/fsl/qe/ucc_fast.h new file mode 100644 index 000000000..ad60b87a3 --- /dev/null +++ b/include/soc/fsl/qe/ucc_fast.h @@ -0,0 +1,266 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Internal header file for UCC FAST unit routines. + * + * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish <gridish@freescale.com> + * Li Yang <leoli@freescale.com> + */ +#ifndef __UCC_FAST_H__ +#define __UCC_FAST_H__ + +#include <linux/types.h> + +#include <soc/fsl/qe/immap_qe.h> +#include <soc/fsl/qe/qe.h> + +#include <soc/fsl/qe/ucc.h> + +/* Receive BD's status and length*/ +#define R_E 0x80000000 /* buffer empty */ +#define R_W 0x20000000 /* wrap bit */ +#define R_I 0x10000000 /* interrupt on reception */ +#define R_L 0x08000000 /* last */ +#define R_F 0x04000000 /* first */ + +/* transmit BD's status and length*/ +#define T_R 0x80000000 /* ready bit */ +#define T_W 0x20000000 /* wrap bit */ +#define T_I 0x10000000 /* interrupt on completion */ +#define T_L 0x08000000 /* last */ + +/* Receive BD's status */ +#define R_E_S 0x8000 /* buffer empty */ +#define R_W_S 0x2000 /* wrap bit */ +#define R_I_S 0x1000 /* interrupt on reception */ +#define R_L_S 0x0800 /* last */ +#define R_F_S 0x0400 /* first */ +#define R_CM_S 0x0200 /* continuous mode */ +#define R_LG_S 0x0020 /* frame length */ +#define R_NO_S 0x0010 /* nonoctet */ +#define R_AB_S 0x0008 /* abort */ +#define R_CR_S 0x0004 /* crc */ +#define R_OV_S 0x0002 /* overrun */ +#define R_CD_S 0x0001 /* carrier detect */ + +/* transmit BD's status */ +#define T_R_S 0x8000 /* ready bit */ +#define T_W_S 0x2000 /* wrap bit */ +#define T_I_S 0x1000 /* interrupt on completion */ +#define T_L_S 0x0800 /* last */ +#define T_TC_S 0x0400 /* crc */ +#define T_TM_S 0x0200 /* continuous mode */ +#define T_UN_S 0x0002 /* hdlc underrun */ +#define T_CT_S 0x0001 /* hdlc carrier lost */ + +/* Rx Data buffer must be 4 bytes aligned in most cases */ +#define UCC_FAST_RX_ALIGN 4 +#define UCC_FAST_MRBLR_ALIGNMENT 4 +#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8 + +/* Sizes */ +#define UCC_FAST_URFS_MIN_VAL 0x88 +#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8 + +/* ucc_fast_channel_protocol_mode - UCC FAST mode */ +enum ucc_fast_channel_protocol_mode { + UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000, + UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001, + UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002, + UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003, + UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004, + UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005, + UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006, + UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007, + UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008, + UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009, + UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A, + UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B, + UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C, + UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D, + UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E, + UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F +}; + +/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */ +enum ucc_fast_transparent_txrx { + UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000, + UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000 +}; + +/* UCC fast diagnostic mode */ +enum ucc_fast_diag_mode { + UCC_FAST_DIAGNOSTIC_NORMAL = 0x0, + UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000, + UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000, + UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000 +}; + +/* UCC fast Sync length (transparent mode only) */ +enum ucc_fast_sync_len { + UCC_FAST_SYNC_LEN_NOT_USED = 0x0, + UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000, + UCC_FAST_SYNC_LEN_8_BIT = 0x00008000, + UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000 +}; + +/* UCC fast RTS mode */ +enum ucc_fast_ready_to_send { + UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000, + UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000 +}; + +/* UCC fast receiver decoding mode */ +enum ucc_fast_rx_decoding_method { + UCC_FAST_RX_ENCODING_NRZ = 0x00000000, + UCC_FAST_RX_ENCODING_NRZI = 0x00000800, + UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000, + UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800 +}; + +/* UCC fast transmitter encoding mode */ +enum ucc_fast_tx_encoding_method { + UCC_FAST_TX_ENCODING_NRZ = 0x00000000, + UCC_FAST_TX_ENCODING_NRZI = 0x00000100, + UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200, + UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300 +}; + +/* UCC fast CRC length */ +enum ucc_fast_transparent_tcrc { + UCC_FAST_16_BIT_CRC = 0x00000000, + UCC_FAST_CRC_RESERVED0 = 0x00000040, + UCC_FAST_32_BIT_CRC = 0x00000080, + UCC_FAST_CRC_RESERVED1 = 0x000000C0 +}; + +/* Fast UCC initialization structure */ +struct ucc_fast_info { + int ucc_num; + int tdm_num; + enum qe_clock rx_clock; + enum qe_clock tx_clock; + enum qe_clock rx_sync; + enum qe_clock tx_sync; + resource_size_t regs; + int irq; + u32 uccm_mask; + int brkpt_support; + int grant_support; + int tsa; + int cdp; + int cds; + int ctsp; + int ctss; + int tci; + int txsy; + int rtsm; + int revd; + int rsyn; + u16 max_rx_buf_length; + u16 urfs; + u16 urfet; + u16 urfset; + u16 utfs; + u16 utfet; + u16 utftt; + u16 ufpt; + enum ucc_fast_channel_protocol_mode mode; + enum ucc_fast_transparent_txrx ttx_trx; + enum ucc_fast_tx_encoding_method tenc; + enum ucc_fast_rx_decoding_method renc; + enum ucc_fast_transparent_tcrc tcrc; + enum ucc_fast_sync_len synl; +}; + +struct ucc_fast_private { + struct ucc_fast_info *uf_info; + struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */ + __be32 __iomem *p_ucce; /* a pointer to the event register in memory. */ + __be32 __iomem *p_uccm; /* a pointer to the mask register in memory. */ +#ifdef CONFIG_UGETH_TX_ON_DEMAND + __be16 __iomem *p_utodr;/* pointer to the transmit on demand register */ +#endif + int enabled_tx; /* Whether channel is enabled for Tx (ENT) */ + int enabled_rx; /* Whether channel is enabled for Rx (ENR) */ + int stopped_tx; /* Whether channel has been stopped for Tx + (STOP_TX, etc.) */ + int stopped_rx; /* Whether channel has been stopped for Rx */ + s32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx + virtual fifo */ + s32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx + virtual fifo */ +#ifdef STATISTICS + u32 tx_frames; /* Transmitted frames counter. */ + u32 rx_frames; /* Received frames counter (only frames + passed to application). */ + u32 tx_discarded; /* Discarded tx frames counter (frames that + were discarded by the driver due to errors). + */ + u32 rx_discarded; /* Discarded rx frames counter (frames that + were discarded by the driver due to errors). + */ +#endif /* STATISTICS */ + u16 mrblr; /* maximum receive buffer length */ +}; + +/* ucc_fast_init + * Initializes Fast UCC according to user provided parameters. + * + * uf_info - (In) pointer to the fast UCC info structure. + * uccf_ret - (Out) pointer to the fast UCC structure. + */ +int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret); + +/* ucc_fast_free + * Frees all resources for fast UCC. + * + * uccf - (In) pointer to the fast UCC structure. + */ +void ucc_fast_free(struct ucc_fast_private * uccf); + +/* ucc_fast_enable + * Enables a fast UCC port. + * This routine enables Tx and/or Rx through the General UCC Mode Register. + * + * uccf - (In) pointer to the fast UCC structure. + * mode - (In) TX, RX, or both. + */ +void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode); + +/* ucc_fast_disable + * Disables a fast UCC port. + * This routine disables Tx and/or Rx through the General UCC Mode Register. + * + * uccf - (In) pointer to the fast UCC structure. + * mode - (In) TX, RX, or both. + */ +void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode); + +/* ucc_fast_irq + * Handles interrupts on fast UCC. + * Called from the general interrupt routine to handle interrupts on fast UCC. + * + * uccf - (In) pointer to the fast UCC structure. + */ +void ucc_fast_irq(struct ucc_fast_private * uccf); + +/* ucc_fast_transmit_on_demand + * Immediately forces a poll of the transmitter for data to be sent. + * Typically, the hardware performs a periodic poll for data that the + * transmit routine has set up to be transmitted. In cases where + * this polling cycle is not soon enough, this optional routine can + * be invoked to force a poll right away, instead. Proper use for + * each transmission for which this functionality is desired is to + * call the transmit routine and then this routine right after. + * + * uccf - (In) pointer to the fast UCC structure. + */ +void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf); + +u32 ucc_fast_get_qe_cr_subblock(int uccf_num); + +void ucc_fast_dump_regs(struct ucc_fast_private * uccf); + +#endif /* __UCC_FAST_H__ */ diff --git a/include/soc/fsl/qe/ucc_slow.h b/include/soc/fsl/qe/ucc_slow.h new file mode 100644 index 000000000..7548ce8a2 --- /dev/null +++ b/include/soc/fsl/qe/ucc_slow.h @@ -0,0 +1,272 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish <gridish@freescale.com> + * Li Yang <leoli@freescale.com> + * + * Description: + * Internal header file for UCC SLOW unit routines. + */ +#ifndef __UCC_SLOW_H__ +#define __UCC_SLOW_H__ + +#include <linux/types.h> + +#include <soc/fsl/qe/immap_qe.h> +#include <soc/fsl/qe/qe.h> + +#include <soc/fsl/qe/ucc.h> + +/* transmit BD's status */ +#define T_R 0x80000000 /* ready bit */ +#define T_PAD 0x40000000 /* add pads to short frames */ +#define T_W 0x20000000 /* wrap bit */ +#define T_I 0x10000000 /* interrupt on completion */ +#define T_L 0x08000000 /* last */ + +#define T_A 0x04000000 /* Address - the data transmitted as address + chars */ +#define T_TC 0x04000000 /* transmit CRC */ +#define T_CM 0x02000000 /* continuous mode */ +#define T_DEF 0x02000000 /* collision on previous attempt to transmit */ +#define T_P 0x01000000 /* Preamble - send Preamble sequence before + data */ +#define T_HB 0x01000000 /* heartbeat */ +#define T_NS 0x00800000 /* No Stop */ +#define T_LC 0x00800000 /* late collision */ +#define T_RL 0x00400000 /* retransmission limit */ +#define T_UN 0x00020000 /* underrun */ +#define T_CT 0x00010000 /* CTS lost */ +#define T_CSL 0x00010000 /* carrier sense lost */ +#define T_RC 0x003c0000 /* retry count */ + +/* Receive BD's status */ +#define R_E 0x80000000 /* buffer empty */ +#define R_W 0x20000000 /* wrap bit */ +#define R_I 0x10000000 /* interrupt on reception */ +#define R_L 0x08000000 /* last */ +#define R_C 0x08000000 /* the last byte in this buffer is a cntl + char */ +#define R_F 0x04000000 /* first */ +#define R_A 0x04000000 /* the first byte in this buffer is address + byte */ +#define R_CM 0x02000000 /* continuous mode */ +#define R_ID 0x01000000 /* buffer close on reception of idles */ +#define R_M 0x01000000 /* Frame received because of promiscuous + mode */ +#define R_AM 0x00800000 /* Address match */ +#define R_DE 0x00800000 /* Address match */ +#define R_LG 0x00200000 /* Break received */ +#define R_BR 0x00200000 /* Frame length violation */ +#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */ +#define R_FR 0x00100000 /* Framing Error (no stop bit) character + received */ +#define R_PR 0x00080000 /* Parity Error character received */ +#define R_AB 0x00080000 /* Frame Aborted */ +#define R_SH 0x00080000 /* frame is too short */ +#define R_CR 0x00040000 /* CRC Error */ +#define R_OV 0x00020000 /* Overrun */ +#define R_CD 0x00010000 /* CD lost */ +#define R_CL 0x00010000 /* this frame is closed because of a + collision */ + +/* Rx Data buffer must be 4 bytes aligned in most cases.*/ +#define UCC_SLOW_RX_ALIGN 4 +#define UCC_SLOW_MRBLR_ALIGNMENT 4 +#define UCC_SLOW_PRAM_SIZE 0x100 +#define ALIGNMENT_OF_UCC_SLOW_PRAM 64 + +/* UCC Slow Channel Protocol Mode */ +enum ucc_slow_channel_protocol_mode { + UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002, + UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004, + UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008, +}; + +/* UCC Slow Transparent Transmit CRC (TCRC) */ +enum ucc_slow_transparent_tcrc { + /* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */ + UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000, + /* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */ + UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000, + /* 32-bit CCITT CRC (Ethernet and HDLC) */ + UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000, +}; + +/* UCC Slow oversampling rate for transmitter (TDCR) */ +enum ucc_slow_tx_oversampling_rate { + /* 1x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000, + /* 8x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000, + /* 16x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000, + /* 32x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000, +}; + +/* UCC Slow Oversampling rate for receiver (RDCR) +*/ +enum ucc_slow_rx_oversampling_rate { + /* 1x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000, + /* 8x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000, + /* 16x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000, + /* 32x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000, +}; + +/* UCC Slow Transmitter encoding method (TENC) +*/ +enum ucc_slow_tx_encoding_method { + UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000, + UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100 +}; + +/* UCC Slow Receiver decoding method (RENC) +*/ +enum ucc_slow_rx_decoding_method { + UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000, + UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800 +}; + +/* UCC Slow Diagnostic mode (DIAG) +*/ +enum ucc_slow_diag_mode { + UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000, + UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040, + UCC_SLOW_DIAG_MODE_ECHO = 0x00000080, + UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0 +}; + +struct ucc_slow_info { + int ucc_num; + int protocol; /* QE_CR_PROTOCOL_xxx */ + enum qe_clock rx_clock; + enum qe_clock tx_clock; + phys_addr_t regs; + int irq; + u16 uccm_mask; + int data_mem_part; + int init_tx; + int init_rx; + u32 tx_bd_ring_len; + u32 rx_bd_ring_len; + int rx_interrupts; + int brkpt_support; + int grant_support; + int tsa; + int cdp; + int cds; + int ctsp; + int ctss; + int rinv; + int tinv; + int rtsm; + int rfw; + int tci; + int tend; + int tfl; + int txsy; + u16 max_rx_buf_length; + enum ucc_slow_transparent_tcrc tcrc; + enum ucc_slow_channel_protocol_mode mode; + enum ucc_slow_diag_mode diag; + enum ucc_slow_tx_oversampling_rate tdcr; + enum ucc_slow_rx_oversampling_rate rdcr; + enum ucc_slow_tx_encoding_method tenc; + enum ucc_slow_rx_decoding_method renc; +}; + +struct ucc_slow_private { + struct ucc_slow_info *us_info; + struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */ + struct ucc_slow_pram __iomem *us_pram; /* a pointer to the parameter RAM */ + s32 us_pram_offset; + int enabled_tx; /* Whether channel is enabled for Tx (ENT) */ + int enabled_rx; /* Whether channel is enabled for Rx (ENR) */ + int stopped_tx; /* Whether channel has been stopped for Tx + (STOP_TX, etc.) */ + int stopped_rx; /* Whether channel has been stopped for Rx */ + struct list_head confQ; /* frames passed to chip waiting for tx */ + u32 first_tx_bd_mask; /* mask is used in Tx routine to save status + and length for first BD in a frame */ + s32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */ + s32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */ + struct qe_bd __iomem *confBd; /* next BD for confirm after Tx */ + struct qe_bd __iomem *tx_bd; /* next BD for new Tx request */ + struct qe_bd __iomem *rx_bd; /* next BD to collect after Rx */ + void *p_rx_frame; /* accumulating receive frame */ + __be16 __iomem *p_ucce; /* a pointer to the event register in memory */ + __be16 __iomem *p_uccm; /* a pointer to the mask register in memory */ + u16 saved_uccm; /* a saved mask for the RX Interrupt bits */ +#ifdef STATISTICS + u32 tx_frames; /* Transmitted frames counters */ + u32 rx_frames; /* Received frames counters (only frames + passed to application) */ + u32 rx_discarded; /* Discarded frames counters (frames that + were discarded by the driver due to + errors) */ +#endif /* STATISTICS */ +}; + +/* ucc_slow_init + * Initializes Slow UCC according to provided parameters. + * + * us_info - (In) pointer to the slow UCC info structure. + * uccs_ret - (Out) pointer to the slow UCC structure. + */ +int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret); + +/* ucc_slow_free + * Frees all resources for slow UCC. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_free(struct ucc_slow_private * uccs); + +/* ucc_slow_enable + * Enables a fast UCC port. + * This routine enables Tx and/or Rx through the General UCC Mode Register. + * + * uccs - (In) pointer to the slow UCC structure. + * mode - (In) TX, RX, or both. + */ +void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode); + +/* ucc_slow_disable + * Disables a fast UCC port. + * This routine disables Tx and/or Rx through the General UCC Mode Register. + * + * uccs - (In) pointer to the slow UCC structure. + * mode - (In) TX, RX, or both. + */ +void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode); + +/* ucc_slow_graceful_stop_tx + * Smoothly stops transmission on a specified slow UCC. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs); + +/* ucc_slow_stop_tx + * Stops transmission on a specified slow UCC. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_stop_tx(struct ucc_slow_private * uccs); + +/* ucc_slow_restart_tx + * Restarts transmitting on a specified slow UCC. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_restart_tx(struct ucc_slow_private *uccs); + +u32 ucc_slow_get_qe_cr_subblock(int uccs_num); + +#endif /* __UCC_SLOW_H__ */ diff --git a/include/soc/fsl/qman.h b/include/soc/fsl/qman.h new file mode 100644 index 000000000..0d3d6beb7 --- /dev/null +++ b/include/soc/fsl/qman.h @@ -0,0 +1,1259 @@ +/* Copyright 2008 - 2016 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __FSL_QMAN_H +#define __FSL_QMAN_H + +#include <linux/bitops.h> +#include <linux/device.h> + +/* Hardware constants */ +#define QM_CHANNEL_SWPORTAL0 0 +#define QMAN_CHANNEL_POOL1 0x21 +#define QMAN_CHANNEL_CAAM 0x80 +#define QMAN_CHANNEL_POOL1_REV3 0x401 +#define QMAN_CHANNEL_CAAM_REV3 0x840 +extern u16 qm_channel_pool1; +extern u16 qm_channel_caam; + +/* Portal processing (interrupt) sources */ +#define QM_PIRQ_CSCI 0x00100000 /* Congestion State Change */ +#define QM_PIRQ_EQCI 0x00080000 /* Enqueue Command Committed */ +#define QM_PIRQ_EQRI 0x00040000 /* EQCR Ring (below threshold) */ +#define QM_PIRQ_DQRI 0x00020000 /* DQRR Ring (non-empty) */ +#define QM_PIRQ_MRI 0x00010000 /* MR Ring (non-empty) */ +/* + * This mask contains all the interrupt sources that need handling except DQRI, + * ie. that if present should trigger slow-path processing. + */ +#define QM_PIRQ_SLOW (QM_PIRQ_CSCI | QM_PIRQ_EQCI | QM_PIRQ_EQRI | \ + QM_PIRQ_MRI) + +/* For qman_static_dequeue_*** APIs */ +#define QM_SDQCR_CHANNELS_POOL_MASK 0x00007fff +/* for n in [1,15] */ +#define QM_SDQCR_CHANNELS_POOL(n) (0x00008000 >> (n)) +/* for conversion from n of qm_channel */ +static inline u32 QM_SDQCR_CHANNELS_POOL_CONV(u16 channel) +{ + return QM_SDQCR_CHANNELS_POOL(channel + 1 - qm_channel_pool1); +} + +/* --- QMan data structures (and associated constants) --- */ + +/* "Frame Descriptor (FD)" */ +struct qm_fd { + union { + struct { + u8 cfg8b_w1; + u8 bpid; /* Buffer Pool ID */ + u8 cfg8b_w3; + u8 addr_hi; /* high 8-bits of 40-bit address */ + __be32 addr_lo; /* low 32-bits of 40-bit address */ + } __packed; + __be64 data; + }; + __be32 cfg; /* format, offset, length / congestion */ + union { + __be32 cmd; + __be32 status; + }; +} __aligned(8); + +#define QM_FD_FORMAT_SG BIT(31) +#define QM_FD_FORMAT_LONG BIT(30) +#define QM_FD_FORMAT_COMPOUND BIT(29) +#define QM_FD_FORMAT_MASK GENMASK(31, 29) +#define QM_FD_OFF_SHIFT 20 +#define QM_FD_OFF_MASK GENMASK(28, 20) +#define QM_FD_LEN_MASK GENMASK(19, 0) +#define QM_FD_LEN_BIG_MASK GENMASK(28, 0) + +enum qm_fd_format { + /* + * 'contig' implies a contiguous buffer, whereas 'sg' implies a + * scatter-gather table. 'big' implies a 29-bit length with no offset + * field, otherwise length is 20-bit and offset is 9-bit. 'compound' + * implies a s/g-like table, where each entry itself represents a frame + * (contiguous or scatter-gather) and the 29-bit "length" is + * interpreted purely for congestion calculations, ie. a "congestion + * weight". + */ + qm_fd_contig = 0, + qm_fd_contig_big = QM_FD_FORMAT_LONG, + qm_fd_sg = QM_FD_FORMAT_SG, + qm_fd_sg_big = QM_FD_FORMAT_SG | QM_FD_FORMAT_LONG, + qm_fd_compound = QM_FD_FORMAT_COMPOUND +}; + +static inline dma_addr_t qm_fd_addr(const struct qm_fd *fd) +{ + return be64_to_cpu(fd->data) & 0xffffffffffLLU; +} + +static inline u64 qm_fd_addr_get64(const struct qm_fd *fd) +{ + return be64_to_cpu(fd->data) & 0xffffffffffLLU; +} + +static inline void qm_fd_addr_set64(struct qm_fd *fd, u64 addr) +{ + fd->addr_hi = upper_32_bits(addr); + fd->addr_lo = cpu_to_be32(lower_32_bits(addr)); +} + +/* + * The 'format' field indicates the interpretation of the remaining + * 29 bits of the 32-bit word. + * If 'format' is _contig or _sg, 20b length and 9b offset. + * If 'format' is _contig_big or _sg_big, 29b length. + * If 'format' is _compound, 29b "congestion weight". + */ +static inline enum qm_fd_format qm_fd_get_format(const struct qm_fd *fd) +{ + return be32_to_cpu(fd->cfg) & QM_FD_FORMAT_MASK; +} + +static inline int qm_fd_get_offset(const struct qm_fd *fd) +{ + return (be32_to_cpu(fd->cfg) & QM_FD_OFF_MASK) >> QM_FD_OFF_SHIFT; +} + +static inline int qm_fd_get_length(const struct qm_fd *fd) +{ + return be32_to_cpu(fd->cfg) & QM_FD_LEN_MASK; +} + +static inline int qm_fd_get_len_big(const struct qm_fd *fd) +{ + return be32_to_cpu(fd->cfg) & QM_FD_LEN_BIG_MASK; +} + +static inline void qm_fd_set_param(struct qm_fd *fd, enum qm_fd_format fmt, + int off, int len) +{ + fd->cfg = cpu_to_be32(fmt | (len & QM_FD_LEN_BIG_MASK) | + ((off << QM_FD_OFF_SHIFT) & QM_FD_OFF_MASK)); +} + +#define qm_fd_set_contig(fd, off, len) \ + qm_fd_set_param(fd, qm_fd_contig, off, len) +#define qm_fd_set_sg(fd, off, len) qm_fd_set_param(fd, qm_fd_sg, off, len) +#define qm_fd_set_contig_big(fd, len) \ + qm_fd_set_param(fd, qm_fd_contig_big, 0, len) +#define qm_fd_set_sg_big(fd, len) qm_fd_set_param(fd, qm_fd_sg_big, 0, len) +#define qm_fd_set_compound(fd, len) qm_fd_set_param(fd, qm_fd_compound, 0, len) + +static inline void qm_fd_clear_fd(struct qm_fd *fd) +{ + fd->data = 0; + fd->cfg = 0; + fd->cmd = 0; +} + +/* Scatter/Gather table entry */ +struct qm_sg_entry { + union { + struct { + u8 __reserved1[3]; + u8 addr_hi; /* high 8-bits of 40-bit address */ + __be32 addr_lo; /* low 32-bits of 40-bit address */ + }; + __be64 data; + }; + __be32 cfg; /* E bit, F bit, length */ + u8 __reserved2; + u8 bpid; + __be16 offset; /* 13-bit, _res[13-15]*/ +} __packed; + +#define QM_SG_LEN_MASK GENMASK(29, 0) +#define QM_SG_OFF_MASK GENMASK(12, 0) +#define QM_SG_FIN BIT(30) +#define QM_SG_EXT BIT(31) + +static inline dma_addr_t qm_sg_addr(const struct qm_sg_entry *sg) +{ + return be64_to_cpu(sg->data) & 0xffffffffffLLU; +} + +static inline u64 qm_sg_entry_get64(const struct qm_sg_entry *sg) +{ + return be64_to_cpu(sg->data) & 0xffffffffffLLU; +} + +static inline void qm_sg_entry_set64(struct qm_sg_entry *sg, u64 addr) +{ + sg->addr_hi = upper_32_bits(addr); + sg->addr_lo = cpu_to_be32(lower_32_bits(addr)); +} + +static inline bool qm_sg_entry_is_final(const struct qm_sg_entry *sg) +{ + return be32_to_cpu(sg->cfg) & QM_SG_FIN; +} + +static inline bool qm_sg_entry_is_ext(const struct qm_sg_entry *sg) +{ + return be32_to_cpu(sg->cfg) & QM_SG_EXT; +} + +static inline int qm_sg_entry_get_len(const struct qm_sg_entry *sg) +{ + return be32_to_cpu(sg->cfg) & QM_SG_LEN_MASK; +} + +static inline void qm_sg_entry_set_len(struct qm_sg_entry *sg, int len) +{ + sg->cfg = cpu_to_be32(len & QM_SG_LEN_MASK); +} + +static inline void qm_sg_entry_set_f(struct qm_sg_entry *sg, int len) +{ + sg->cfg = cpu_to_be32(QM_SG_FIN | (len & QM_SG_LEN_MASK)); +} + +static inline int qm_sg_entry_get_off(const struct qm_sg_entry *sg) +{ + return be32_to_cpu(sg->offset) & QM_SG_OFF_MASK; +} + +/* "Frame Dequeue Response" */ +struct qm_dqrr_entry { + u8 verb; + u8 stat; + __be16 seqnum; /* 15-bit */ + u8 tok; + u8 __reserved2[3]; + __be32 fqid; /* 24-bit */ + __be32 context_b; + struct qm_fd fd; + u8 __reserved4[32]; +} __packed __aligned(64); +#define QM_DQRR_VERB_VBIT 0x80 +#define QM_DQRR_VERB_MASK 0x7f /* where the verb contains; */ +#define QM_DQRR_VERB_FRAME_DEQUEUE 0x60 /* "this format" */ +#define QM_DQRR_STAT_FQ_EMPTY 0x80 /* FQ empty */ +#define QM_DQRR_STAT_FQ_HELDACTIVE 0x40 /* FQ held active */ +#define QM_DQRR_STAT_FQ_FORCEELIGIBLE 0x20 /* FQ was force-eligible'd */ +#define QM_DQRR_STAT_FD_VALID 0x10 /* has a non-NULL FD */ +#define QM_DQRR_STAT_UNSCHEDULED 0x02 /* Unscheduled dequeue */ +#define QM_DQRR_STAT_DQCR_EXPIRED 0x01 /* VDQCR or PDQCR expired*/ + +/* 'fqid' is a 24-bit field in every h/w descriptor */ +#define QM_FQID_MASK GENMASK(23, 0) +#define qm_fqid_set(p, v) ((p)->fqid = cpu_to_be32((v) & QM_FQID_MASK)) +#define qm_fqid_get(p) (be32_to_cpu((p)->fqid) & QM_FQID_MASK) + +/* "ERN Message Response" */ +/* "FQ State Change Notification" */ +union qm_mr_entry { + struct { + u8 verb; + u8 __reserved[63]; + }; + struct { + u8 verb; + u8 dca; + __be16 seqnum; + u8 rc; /* Rej Code: 8-bit */ + u8 __reserved[3]; + __be32 fqid; /* 24-bit */ + __be32 tag; + struct qm_fd fd; + u8 __reserved1[32]; + } __packed __aligned(64) ern; + struct { + u8 verb; + u8 fqs; /* Frame Queue Status */ + u8 __reserved1[6]; + __be32 fqid; /* 24-bit */ + __be32 context_b; + u8 __reserved2[48]; + } __packed fq; /* FQRN/FQRNI/FQRL/FQPN */ +}; +#define QM_MR_VERB_VBIT 0x80 +/* + * ERNs originating from direct-connect portals ("dcern") use 0x20 as a verb + * which would be invalid as a s/w enqueue verb. A s/w ERN can be distinguished + * from the other MR types by noting if the 0x20 bit is unset. + */ +#define QM_MR_VERB_TYPE_MASK 0x27 +#define QM_MR_VERB_DC_ERN 0x20 +#define QM_MR_VERB_FQRN 0x21 +#define QM_MR_VERB_FQRNI 0x22 +#define QM_MR_VERB_FQRL 0x23 +#define QM_MR_VERB_FQPN 0x24 +#define QM_MR_RC_MASK 0xf0 /* contains one of; */ +#define QM_MR_RC_CGR_TAILDROP 0x00 +#define QM_MR_RC_WRED 0x10 +#define QM_MR_RC_ERROR 0x20 +#define QM_MR_RC_ORPWINDOW_EARLY 0x30 +#define QM_MR_RC_ORPWINDOW_LATE 0x40 +#define QM_MR_RC_FQ_TAILDROP 0x50 +#define QM_MR_RC_ORPWINDOW_RETIRED 0x60 +#define QM_MR_RC_ORP_ZERO 0x70 +#define QM_MR_FQS_ORLPRESENT 0x02 /* ORL fragments to come */ +#define QM_MR_FQS_NOTEMPTY 0x01 /* FQ has enqueued frames */ + +/* + * An identical structure of FQD fields is present in the "Init FQ" command and + * the "Query FQ" result, it's suctioned out into the "struct qm_fqd" type. + * Within that, the 'stashing' and 'taildrop' pieces are also factored out, the + * latter has two inlines to assist with converting to/from the mant+exp + * representation. + */ +struct qm_fqd_stashing { + /* See QM_STASHING_EXCL_<...> */ + u8 exclusive; + /* Numbers of cachelines */ + u8 cl; /* _res[6-7], as[4-5], ds[2-3], cs[0-1] */ +}; + +struct qm_fqd_oac { + /* "Overhead Accounting Control", see QM_OAC_<...> */ + u8 oac; /* oac[6-7], _res[0-5] */ + /* Two's-complement value (-128 to +127) */ + s8 oal; /* "Overhead Accounting Length" */ +}; + +struct qm_fqd { + /* _res[6-7], orprws[3-5], oa[2], olws[0-1] */ + u8 orpc; + u8 cgid; + __be16 fq_ctrl; /* See QM_FQCTRL_<...> */ + __be16 dest_wq; /* channel[3-15], wq[0-2] */ + __be16 ics_cred; /* 15-bit */ + /* + * For "Initialize Frame Queue" commands, the write-enable mask + * determines whether 'td' or 'oac_init' is observed. For query + * commands, this field is always 'td', and 'oac_query' (below) reflects + * the Overhead ACcounting values. + */ + union { + __be16 td; /* "Taildrop": _res[13-15], mant[5-12], exp[0-4] */ + struct qm_fqd_oac oac_init; + }; + __be32 context_b; + union { + /* Treat it as 64-bit opaque */ + __be64 opaque; + struct { + __be32 hi; + __be32 lo; + }; + /* Treat it as s/w portal stashing config */ + /* see "FQD Context_A field used for [...]" */ + struct { + struct qm_fqd_stashing stashing; + /* + * 48-bit address of FQ context to + * stash, must be cacheline-aligned + */ + __be16 context_hi; + __be32 context_lo; + } __packed; + } context_a; + struct qm_fqd_oac oac_query; +} __packed; + +#define QM_FQD_CHAN_OFF 3 +#define QM_FQD_WQ_MASK GENMASK(2, 0) +#define QM_FQD_TD_EXP_MASK GENMASK(4, 0) +#define QM_FQD_TD_MANT_OFF 5 +#define QM_FQD_TD_MANT_MASK GENMASK(12, 5) +#define QM_FQD_TD_MAX 0xe0000000 +#define QM_FQD_TD_MANT_MAX 0xff +#define QM_FQD_OAC_OFF 6 +#define QM_FQD_AS_OFF 4 +#define QM_FQD_DS_OFF 2 +#define QM_FQD_XS_MASK 0x3 + +/* 64-bit converters for context_hi/lo */ +static inline u64 qm_fqd_stashing_get64(const struct qm_fqd *fqd) +{ + return be64_to_cpu(fqd->context_a.opaque) & 0xffffffffffffULL; +} + +static inline dma_addr_t qm_fqd_stashing_addr(const struct qm_fqd *fqd) +{ + return be64_to_cpu(fqd->context_a.opaque) & 0xffffffffffffULL; +} + +static inline u64 qm_fqd_context_a_get64(const struct qm_fqd *fqd) +{ + return qm_fqd_stashing_get64(fqd); +} + +static inline void qm_fqd_stashing_set64(struct qm_fqd *fqd, u64 addr) +{ + fqd->context_a.context_hi = cpu_to_be16(upper_32_bits(addr)); + fqd->context_a.context_lo = cpu_to_be32(lower_32_bits(addr)); +} + +static inline void qm_fqd_context_a_set64(struct qm_fqd *fqd, u64 addr) +{ + fqd->context_a.hi = cpu_to_be32(upper_32_bits(addr)); + fqd->context_a.lo = cpu_to_be32(lower_32_bits(addr)); +} + +/* convert a threshold value into mant+exp representation */ +static inline int qm_fqd_set_taildrop(struct qm_fqd *fqd, u32 val, + int roundup) +{ + u32 e = 0; + int td, oddbit = 0; + + if (val > QM_FQD_TD_MAX) + return -ERANGE; + + while (val > QM_FQD_TD_MANT_MAX) { + oddbit = val & 1; + val >>= 1; + e++; + if (roundup && oddbit) + val++; + } + + td = (val << QM_FQD_TD_MANT_OFF) & QM_FQD_TD_MANT_MASK; + td |= (e & QM_FQD_TD_EXP_MASK); + fqd->td = cpu_to_be16(td); + return 0; +} +/* and the other direction */ +static inline int qm_fqd_get_taildrop(const struct qm_fqd *fqd) +{ + int td = be16_to_cpu(fqd->td); + + return ((td & QM_FQD_TD_MANT_MASK) >> QM_FQD_TD_MANT_OFF) + << (td & QM_FQD_TD_EXP_MASK); +} + +static inline void qm_fqd_set_stashing(struct qm_fqd *fqd, u8 as, u8 ds, u8 cs) +{ + struct qm_fqd_stashing *st = &fqd->context_a.stashing; + + st->cl = ((as & QM_FQD_XS_MASK) << QM_FQD_AS_OFF) | + ((ds & QM_FQD_XS_MASK) << QM_FQD_DS_OFF) | + (cs & QM_FQD_XS_MASK); +} + +static inline u8 qm_fqd_get_stashing(const struct qm_fqd *fqd) +{ + return fqd->context_a.stashing.cl; +} + +static inline void qm_fqd_set_oac(struct qm_fqd *fqd, u8 val) +{ + fqd->oac_init.oac = val << QM_FQD_OAC_OFF; +} + +static inline void qm_fqd_set_oal(struct qm_fqd *fqd, s8 val) +{ + fqd->oac_init.oal = val; +} + +static inline void qm_fqd_set_destwq(struct qm_fqd *fqd, int ch, int wq) +{ + fqd->dest_wq = cpu_to_be16((ch << QM_FQD_CHAN_OFF) | + (wq & QM_FQD_WQ_MASK)); +} + +static inline int qm_fqd_get_chan(const struct qm_fqd *fqd) +{ + return be16_to_cpu(fqd->dest_wq) >> QM_FQD_CHAN_OFF; +} + +static inline int qm_fqd_get_wq(const struct qm_fqd *fqd) +{ + return be16_to_cpu(fqd->dest_wq) & QM_FQD_WQ_MASK; +} + +/* See "Frame Queue Descriptor (FQD)" */ +/* Frame Queue Descriptor (FQD) field 'fq_ctrl' uses these constants */ +#define QM_FQCTRL_MASK 0x07ff /* 'fq_ctrl' flags; */ +#define QM_FQCTRL_CGE 0x0400 /* Congestion Group Enable */ +#define QM_FQCTRL_TDE 0x0200 /* Tail-Drop Enable */ +#define QM_FQCTRL_CTXASTASHING 0x0080 /* Context-A stashing */ +#define QM_FQCTRL_CPCSTASH 0x0040 /* CPC Stash Enable */ +#define QM_FQCTRL_FORCESFDR 0x0008 /* High-priority SFDRs */ +#define QM_FQCTRL_AVOIDBLOCK 0x0004 /* Don't block active */ +#define QM_FQCTRL_HOLDACTIVE 0x0002 /* Hold active in portal */ +#define QM_FQCTRL_PREFERINCACHE 0x0001 /* Aggressively cache FQD */ +#define QM_FQCTRL_LOCKINCACHE QM_FQCTRL_PREFERINCACHE /* older naming */ + +/* See "FQD Context_A field used for [...] */ +/* Frame Queue Descriptor (FQD) field 'CONTEXT_A' uses these constants */ +#define QM_STASHING_EXCL_ANNOTATION 0x04 +#define QM_STASHING_EXCL_DATA 0x02 +#define QM_STASHING_EXCL_CTX 0x01 + +/* See "Intra Class Scheduling" */ +/* FQD field 'OAC' (Overhead ACcounting) uses these constants */ +#define QM_OAC_ICS 0x2 /* Accounting for Intra-Class Scheduling */ +#define QM_OAC_CG 0x1 /* Accounting for Congestion Groups */ + +/* + * This struct represents the 32-bit "WR_PARM_[GYR]" parameters in CGR fields + * and associated commands/responses. The WRED parameters are calculated from + * these fields as follows; + * MaxTH = MA * (2 ^ Mn) + * Slope = SA / (2 ^ Sn) + * MaxP = 4 * (Pn + 1) + */ +struct qm_cgr_wr_parm { + /* MA[24-31], Mn[19-23], SA[12-18], Sn[6-11], Pn[0-5] */ + __be32 word; +}; +/* + * This struct represents the 13-bit "CS_THRES" CGR field. In the corresponding + * management commands, this is padded to a 16-bit structure field, so that's + * how we represent it here. The congestion state threshold is calculated from + * these fields as follows; + * CS threshold = TA * (2 ^ Tn) + */ +struct qm_cgr_cs_thres { + /* _res[13-15], TA[5-12], Tn[0-4] */ + __be16 word; +}; +/* + * This identical structure of CGR fields is present in the "Init/Modify CGR" + * commands and the "Query CGR" result. It's suctioned out here into its own + * struct. + */ +struct __qm_mc_cgr { + struct qm_cgr_wr_parm wr_parm_g; + struct qm_cgr_wr_parm wr_parm_y; + struct qm_cgr_wr_parm wr_parm_r; + u8 wr_en_g; /* boolean, use QM_CGR_EN */ + u8 wr_en_y; /* boolean, use QM_CGR_EN */ + u8 wr_en_r; /* boolean, use QM_CGR_EN */ + u8 cscn_en; /* boolean, use QM_CGR_EN */ + union { + struct { + __be16 cscn_targ_upd_ctrl; /* use QM_CGR_TARG_UDP_* */ + __be16 cscn_targ_dcp_low; + }; + __be32 cscn_targ; /* use QM_CGR_TARG_* */ + }; + u8 cstd_en; /* boolean, use QM_CGR_EN */ + u8 cs; /* boolean, only used in query response */ + struct qm_cgr_cs_thres cs_thres; /* use qm_cgr_cs_thres_set64() */ + u8 mode; /* QMAN_CGR_MODE_FRAME not supported in rev1.0 */ +} __packed; +#define QM_CGR_EN 0x01 /* For wr_en_*, cscn_en, cstd_en */ +#define QM_CGR_TARG_UDP_CTRL_WRITE_BIT 0x8000 /* value written to portal bit*/ +#define QM_CGR_TARG_UDP_CTRL_DCP 0x4000 /* 0: SWP, 1: DCP */ +#define QM_CGR_TARG_PORTAL(n) (0x80000000 >> (n)) /* s/w portal, 0-9 */ +#define QM_CGR_TARG_FMAN0 0x00200000 /* direct-connect portal: fman0 */ +#define QM_CGR_TARG_FMAN1 0x00100000 /* : fman1 */ +/* Convert CGR thresholds to/from "cs_thres" format */ +static inline u64 qm_cgr_cs_thres_get64(const struct qm_cgr_cs_thres *th) +{ + int thres = be16_to_cpu(th->word); + + return ((thres >> 5) & 0xff) << (thres & 0x1f); +} + +static inline int qm_cgr_cs_thres_set64(struct qm_cgr_cs_thres *th, u64 val, + int roundup) +{ + u32 e = 0; + int oddbit = 0; + + while (val > 0xff) { + oddbit = val & 1; + val >>= 1; + e++; + if (roundup && oddbit) + val++; + } + th->word = cpu_to_be16(((val & 0xff) << 5) | (e & 0x1f)); + return 0; +} + +/* "Initialize FQ" */ +struct qm_mcc_initfq { + u8 __reserved1[2]; + __be16 we_mask; /* Write Enable Mask */ + __be32 fqid; /* 24-bit */ + __be16 count; /* Initialises 'count+1' FQDs */ + struct qm_fqd fqd; /* the FQD fields go here */ + u8 __reserved2[30]; +} __packed; +/* "Initialize/Modify CGR" */ +struct qm_mcc_initcgr { + u8 __reserve1[2]; + __be16 we_mask; /* Write Enable Mask */ + struct __qm_mc_cgr cgr; /* CGR fields */ + u8 __reserved2[2]; + u8 cgid; + u8 __reserved3[32]; +} __packed; + +/* INITFQ-specific flags */ +#define QM_INITFQ_WE_MASK 0x01ff /* 'Write Enable' flags; */ +#define QM_INITFQ_WE_OAC 0x0100 +#define QM_INITFQ_WE_ORPC 0x0080 +#define QM_INITFQ_WE_CGID 0x0040 +#define QM_INITFQ_WE_FQCTRL 0x0020 +#define QM_INITFQ_WE_DESTWQ 0x0010 +#define QM_INITFQ_WE_ICSCRED 0x0008 +#define QM_INITFQ_WE_TDTHRESH 0x0004 +#define QM_INITFQ_WE_CONTEXTB 0x0002 +#define QM_INITFQ_WE_CONTEXTA 0x0001 +/* INITCGR/MODIFYCGR-specific flags */ +#define QM_CGR_WE_MASK 0x07ff /* 'Write Enable Mask'; */ +#define QM_CGR_WE_WR_PARM_G 0x0400 +#define QM_CGR_WE_WR_PARM_Y 0x0200 +#define QM_CGR_WE_WR_PARM_R 0x0100 +#define QM_CGR_WE_WR_EN_G 0x0080 +#define QM_CGR_WE_WR_EN_Y 0x0040 +#define QM_CGR_WE_WR_EN_R 0x0020 +#define QM_CGR_WE_CSCN_EN 0x0010 +#define QM_CGR_WE_CSCN_TARG 0x0008 +#define QM_CGR_WE_CSTD_EN 0x0004 +#define QM_CGR_WE_CS_THRES 0x0002 +#define QM_CGR_WE_MODE 0x0001 + +#define QMAN_CGR_FLAG_USE_INIT 0x00000001 +#define QMAN_CGR_MODE_FRAME 0x00000001 + + /* Portal and Frame Queues */ +/* Represents a managed portal */ +struct qman_portal; + +/* + * This object type represents QMan frame queue descriptors (FQD), it is + * cacheline-aligned, and initialised by qman_create_fq(). The structure is + * defined further down. + */ +struct qman_fq; + +/* + * This object type represents a QMan congestion group, it is defined further + * down. + */ +struct qman_cgr; + +/* + * This enum, and the callback type that returns it, are used when handling + * dequeued frames via DQRR. Note that for "null" callbacks registered with the + * portal object (for handling dequeues that do not demux because context_b is + * NULL), the return value *MUST* be qman_cb_dqrr_consume. + */ +enum qman_cb_dqrr_result { + /* DQRR entry can be consumed */ + qman_cb_dqrr_consume, + /* Like _consume, but requests parking - FQ must be held-active */ + qman_cb_dqrr_park, + /* Does not consume, for DCA mode only. */ + qman_cb_dqrr_defer, + /* + * Stop processing without consuming this ring entry. Exits the current + * qman_p_poll_dqrr() or interrupt-handling, as appropriate. If within + * an interrupt handler, the callback would typically call + * qman_irqsource_remove(QM_PIRQ_DQRI) before returning this value, + * otherwise the interrupt will reassert immediately. + */ + qman_cb_dqrr_stop, + /* Like qman_cb_dqrr_stop, but consumes the current entry. */ + qman_cb_dqrr_consume_stop +}; +typedef enum qman_cb_dqrr_result (*qman_cb_dqrr)(struct qman_portal *qm, + struct qman_fq *fq, + const struct qm_dqrr_entry *dqrr, + bool sched_napi); + +/* + * This callback type is used when handling ERNs, FQRNs and FQRLs via MR. They + * are always consumed after the callback returns. + */ +typedef void (*qman_cb_mr)(struct qman_portal *qm, struct qman_fq *fq, + const union qm_mr_entry *msg); + +/* + * s/w-visible states. Ie. tentatively scheduled + truly scheduled + active + + * held-active + held-suspended are just "sched". Things like "retired" will not + * be assumed until it is complete (ie. QMAN_FQ_STATE_CHANGING is set until + * then, to indicate it's completing and to gate attempts to retry the retire + * command). Note, park commands do not set QMAN_FQ_STATE_CHANGING because it's + * technically impossible in the case of enqueue DCAs (which refer to DQRR ring + * index rather than the FQ that ring entry corresponds to), so repeated park + * commands are allowed (if you're silly enough to try) but won't change FQ + * state, and the resulting park notifications move FQs from "sched" to + * "parked". + */ +enum qman_fq_state { + qman_fq_state_oos, + qman_fq_state_parked, + qman_fq_state_sched, + qman_fq_state_retired +}; + +#define QMAN_FQ_STATE_CHANGING 0x80000000 /* 'state' is changing */ +#define QMAN_FQ_STATE_NE 0x40000000 /* retired FQ isn't empty */ +#define QMAN_FQ_STATE_ORL 0x20000000 /* retired FQ has ORL */ +#define QMAN_FQ_STATE_BLOCKOOS 0xe0000000 /* if any are set, no OOS */ +#define QMAN_FQ_STATE_CGR_EN 0x10000000 /* CGR enabled */ +#define QMAN_FQ_STATE_VDQCR 0x08000000 /* being volatile dequeued */ + +/* + * Frame queue objects (struct qman_fq) are stored within memory passed to + * qman_create_fq(), as this allows stashing of caller-provided demux callback + * pointers at no extra cost to stashing of (driver-internal) FQ state. If the + * caller wishes to add per-FQ state and have it benefit from dequeue-stashing, + * they should; + * + * (a) extend the qman_fq structure with their state; eg. + * + * // myfq is allocated and driver_fq callbacks filled in; + * struct my_fq { + * struct qman_fq base; + * int an_extra_field; + * [ ... add other fields to be associated with each FQ ...] + * } *myfq = some_my_fq_allocator(); + * struct qman_fq *fq = qman_create_fq(fqid, flags, &myfq->base); + * + * // in a dequeue callback, access extra fields from 'fq' via a cast; + * struct my_fq *myfq = (struct my_fq *)fq; + * do_something_with(myfq->an_extra_field); + * [...] + * + * (b) when and if configuring the FQ for context stashing, specify how ever + * many cachelines are required to stash 'struct my_fq', to accelerate not + * only the QMan driver but the callback as well. + */ + +struct qman_fq_cb { + qman_cb_dqrr dqrr; /* for dequeued frames */ + qman_cb_mr ern; /* for s/w ERNs */ + qman_cb_mr fqs; /* frame-queue state changes*/ +}; + +struct qman_fq { + /* Caller of qman_create_fq() provides these demux callbacks */ + struct qman_fq_cb cb; + /* + * These are internal to the driver, don't touch. In particular, they + * may change, be removed, or extended (so you shouldn't rely on + * sizeof(qman_fq) being a constant). + */ + u32 fqid, idx; + unsigned long flags; + enum qman_fq_state state; + int cgr_groupid; +}; + +/* + * This callback type is used when handling congestion group entry/exit. + * 'congested' is non-zero on congestion-entry, and zero on congestion-exit. + */ +typedef void (*qman_cb_cgr)(struct qman_portal *qm, + struct qman_cgr *cgr, int congested); + +struct qman_cgr { + /* Set these prior to qman_create_cgr() */ + u32 cgrid; /* 0..255, but u32 to allow specials like -1, 256, etc.*/ + qman_cb_cgr cb; + /* These are private to the driver */ + u16 chan; /* portal channel this object is created on */ + struct list_head node; +}; + +/* Flags to qman_create_fq() */ +#define QMAN_FQ_FLAG_NO_ENQUEUE 0x00000001 /* can't enqueue */ +#define QMAN_FQ_FLAG_NO_MODIFY 0x00000002 /* can only enqueue */ +#define QMAN_FQ_FLAG_TO_DCPORTAL 0x00000004 /* consumed by CAAM/PME/Fman */ +#define QMAN_FQ_FLAG_DYNAMIC_FQID 0x00000020 /* (de)allocate fqid */ + +/* Flags to qman_init_fq() */ +#define QMAN_INITFQ_FLAG_SCHED 0x00000001 /* schedule rather than park */ +#define QMAN_INITFQ_FLAG_LOCAL 0x00000004 /* set dest portal */ + +/* + * For qman_volatile_dequeue(); Choose one PRECEDENCE. EXACT is optional. Use + * NUMFRAMES(n) (6-bit) or NUMFRAMES_TILLEMPTY to fill in the frame-count. Use + * FQID(n) to fill in the frame queue ID. + */ +#define QM_VDQCR_PRECEDENCE_VDQCR 0x0 +#define QM_VDQCR_PRECEDENCE_SDQCR 0x80000000 +#define QM_VDQCR_EXACT 0x40000000 +#define QM_VDQCR_NUMFRAMES_MASK 0x3f000000 +#define QM_VDQCR_NUMFRAMES_SET(n) (((n) & 0x3f) << 24) +#define QM_VDQCR_NUMFRAMES_GET(n) (((n) >> 24) & 0x3f) +#define QM_VDQCR_NUMFRAMES_TILLEMPTY QM_VDQCR_NUMFRAMES_SET(0) + +#define QMAN_VOLATILE_FLAG_WAIT 0x00000001 /* wait if VDQCR is in use */ +#define QMAN_VOLATILE_FLAG_WAIT_INT 0x00000002 /* if wait, interruptible? */ +#define QMAN_VOLATILE_FLAG_FINISH 0x00000004 /* wait till VDQCR completes */ + +/* "Query FQ Non-Programmable Fields" */ +struct qm_mcr_queryfq_np { + u8 verb; + u8 result; + u8 __reserved1; + u8 state; /* QM_MCR_NP_STATE_*** */ + u32 fqd_link; /* 24-bit, _res2[24-31] */ + u16 odp_seq; /* 14-bit, _res3[14-15] */ + u16 orp_nesn; /* 14-bit, _res4[14-15] */ + u16 orp_ea_hseq; /* 15-bit, _res5[15] */ + u16 orp_ea_tseq; /* 15-bit, _res6[15] */ + u32 orp_ea_hptr; /* 24-bit, _res7[24-31] */ + u32 orp_ea_tptr; /* 24-bit, _res8[24-31] */ + u32 pfdr_hptr; /* 24-bit, _res9[24-31] */ + u32 pfdr_tptr; /* 24-bit, _res10[24-31] */ + u8 __reserved2[5]; + u8 is; /* 1-bit, _res12[1-7] */ + u16 ics_surp; + u32 byte_cnt; + u32 frm_cnt; /* 24-bit, _res13[24-31] */ + u32 __reserved3; + u16 ra1_sfdr; /* QM_MCR_NP_RA1_*** */ + u16 ra2_sfdr; /* QM_MCR_NP_RA2_*** */ + u16 __reserved4; + u16 od1_sfdr; /* QM_MCR_NP_OD1_*** */ + u16 od2_sfdr; /* QM_MCR_NP_OD2_*** */ + u16 od3_sfdr; /* QM_MCR_NP_OD3_*** */ +} __packed; + +#define QM_MCR_NP_STATE_FE 0x10 +#define QM_MCR_NP_STATE_R 0x08 +#define QM_MCR_NP_STATE_MASK 0x07 /* Reads FQD::STATE; */ +#define QM_MCR_NP_STATE_OOS 0x00 +#define QM_MCR_NP_STATE_RETIRED 0x01 +#define QM_MCR_NP_STATE_TEN_SCHED 0x02 +#define QM_MCR_NP_STATE_TRU_SCHED 0x03 +#define QM_MCR_NP_STATE_PARKED 0x04 +#define QM_MCR_NP_STATE_ACTIVE 0x05 +#define QM_MCR_NP_PTR_MASK 0x07ff /* for RA[12] & OD[123] */ +#define QM_MCR_NP_RA1_NRA(v) (((v) >> 14) & 0x3) /* FQD::NRA */ +#define QM_MCR_NP_RA2_IT(v) (((v) >> 14) & 0x1) /* FQD::IT */ +#define QM_MCR_NP_OD1_NOD(v) (((v) >> 14) & 0x3) /* FQD::NOD */ +#define QM_MCR_NP_OD3_NPC(v) (((v) >> 14) & 0x3) /* FQD::NPC */ + +enum qm_mcr_queryfq_np_masks { + qm_mcr_fqd_link_mask = BIT(24) - 1, + qm_mcr_odp_seq_mask = BIT(14) - 1, + qm_mcr_orp_nesn_mask = BIT(14) - 1, + qm_mcr_orp_ea_hseq_mask = BIT(15) - 1, + qm_mcr_orp_ea_tseq_mask = BIT(15) - 1, + qm_mcr_orp_ea_hptr_mask = BIT(24) - 1, + qm_mcr_orp_ea_tptr_mask = BIT(24) - 1, + qm_mcr_pfdr_hptr_mask = BIT(24) - 1, + qm_mcr_pfdr_tptr_mask = BIT(24) - 1, + qm_mcr_is_mask = BIT(1) - 1, + qm_mcr_frm_cnt_mask = BIT(24) - 1, +}; + +#define qm_mcr_np_get(np, field) \ + ((np)->field & (qm_mcr_##field##_mask)) + + /* Portal Management */ +/** + * qman_p_irqsource_add - add processing sources to be interrupt-driven + * @bits: bitmask of QM_PIRQ_**I processing sources + * + * Adds processing sources that should be interrupt-driven (rather than + * processed via qman_poll_***() functions). + */ +void qman_p_irqsource_add(struct qman_portal *p, u32 bits); + +/** + * qman_p_irqsource_remove - remove processing sources from being int-driven + * @bits: bitmask of QM_PIRQ_**I processing sources + * + * Removes processing sources from being interrupt-driven, so that they will + * instead be processed via qman_poll_***() functions. + */ +void qman_p_irqsource_remove(struct qman_portal *p, u32 bits); + +/** + * qman_affine_cpus - return a mask of cpus that have affine portals + */ +const cpumask_t *qman_affine_cpus(void); + +/** + * qman_affine_channel - return the channel ID of an portal + * @cpu: the cpu whose affine portal is the subject of the query + * + * If @cpu is -1, the affine portal for the current CPU will be used. It is a + * bug to call this function for any value of @cpu (other than -1) that is not a + * member of the mask returned from qman_affine_cpus(). + */ +u16 qman_affine_channel(int cpu); + +/** + * qman_get_affine_portal - return the portal pointer affine to cpu + * @cpu: the cpu whose affine portal is the subject of the query + */ +struct qman_portal *qman_get_affine_portal(int cpu); + +/** + * qman_start_using_portal - register a device link for the portal user + * @p: the portal that will be in use + * @dev: the device that will use the portal + * + * Makes sure that the devices that use the portal are unbound when the + * portal is unbound + */ +int qman_start_using_portal(struct qman_portal *p, struct device *dev); + +/** + * qman_p_poll_dqrr - process DQRR (fast-path) entries + * @limit: the maximum number of DQRR entries to process + * + * Use of this function requires that DQRR processing not be interrupt-driven. + * The return value represents the number of DQRR entries processed. + */ +int qman_p_poll_dqrr(struct qman_portal *p, unsigned int limit); + +/** + * qman_p_static_dequeue_add - Add pool channels to the portal SDQCR + * @pools: bit-mask of pool channels, using QM_SDQCR_CHANNELS_POOL(n) + * + * Adds a set of pool channels to the portal's static dequeue command register + * (SDQCR). The requested pools are limited to those the portal has dequeue + * access to. + */ +void qman_p_static_dequeue_add(struct qman_portal *p, u32 pools); + + /* FQ management */ +/** + * qman_create_fq - Allocates a FQ + * @fqid: the index of the FQD to encapsulate, must be "Out of Service" + * @flags: bit-mask of QMAN_FQ_FLAG_*** options + * @fq: memory for storing the 'fq', with callbacks filled in + * + * Creates a frame queue object for the given @fqid, unless the + * QMAN_FQ_FLAG_DYNAMIC_FQID flag is set in @flags, in which case a FQID is + * dynamically allocated (or the function fails if none are available). Once + * created, the caller should not touch the memory at 'fq' except as extended to + * adjacent memory for user-defined fields (see the definition of "struct + * qman_fq" for more info). NO_MODIFY is only intended for enqueuing to + * pre-existing frame-queues that aren't to be otherwise interfered with, it + * prevents all other modifications to the frame queue. The TO_DCPORTAL flag + * causes the driver to honour any context_b modifications requested in the + * qm_init_fq() API, as this indicates the frame queue will be consumed by a + * direct-connect portal (PME, CAAM, or Fman). When frame queues are consumed by + * software portals, the context_b field is controlled by the driver and can't + * be modified by the caller. + */ +int qman_create_fq(u32 fqid, u32 flags, struct qman_fq *fq); + +/** + * qman_destroy_fq - Deallocates a FQ + * @fq: the frame queue object to release + * + * The memory for this frame queue object ('fq' provided in qman_create_fq()) is + * not deallocated but the caller regains ownership, to do with as desired. The + * FQ must be in the 'out-of-service' or in the 'parked' state. + */ +void qman_destroy_fq(struct qman_fq *fq); + +/** + * qman_fq_fqid - Queries the frame queue ID of a FQ object + * @fq: the frame queue object to query + */ +u32 qman_fq_fqid(struct qman_fq *fq); + +/** + * qman_init_fq - Initialises FQ fields, leaves the FQ "parked" or "scheduled" + * @fq: the frame queue object to modify, must be 'parked' or new. + * @flags: bit-mask of QMAN_INITFQ_FLAG_*** options + * @opts: the FQ-modification settings, as defined in the low-level API + * + * The @opts parameter comes from the low-level portal API. Select + * QMAN_INITFQ_FLAG_SCHED in @flags to cause the frame queue to be scheduled + * rather than parked. NB, @opts can be NULL. + * + * Note that some fields and options within @opts may be ignored or overwritten + * by the driver; + * 1. the 'count' and 'fqid' fields are always ignored (this operation only + * affects one frame queue: @fq). + * 2. the QM_INITFQ_WE_CONTEXTB option of the 'we_mask' field and the associated + * 'fqd' structure's 'context_b' field are sometimes overwritten; + * - if @fq was not created with QMAN_FQ_FLAG_TO_DCPORTAL, then context_b is + * initialised to a value used by the driver for demux. + * - if context_b is initialised for demux, so is context_a in case stashing + * is requested (see item 4). + * (So caller control of context_b is only possible for TO_DCPORTAL frame queue + * objects.) + * 3. if @flags contains QMAN_INITFQ_FLAG_LOCAL, the 'fqd' structure's + * 'dest::channel' field will be overwritten to match the portal used to issue + * the command. If the WE_DESTWQ write-enable bit had already been set by the + * caller, the channel workqueue will be left as-is, otherwise the write-enable + * bit is set and the workqueue is set to a default of 4. If the "LOCAL" flag + * isn't set, the destination channel/workqueue fields and the write-enable bit + * are left as-is. + * 4. if the driver overwrites context_a/b for demux, then if + * QM_INITFQ_WE_CONTEXTA is set, the driver will only overwrite + * context_a.address fields and will leave the stashing fields provided by the + * user alone, otherwise it will zero out the context_a.stashing fields. + */ +int qman_init_fq(struct qman_fq *fq, u32 flags, struct qm_mcc_initfq *opts); + +/** + * qman_schedule_fq - Schedules a FQ + * @fq: the frame queue object to schedule, must be 'parked' + * + * Schedules the frame queue, which must be Parked, which takes it to + * Tentatively-Scheduled or Truly-Scheduled depending on its fill-level. + */ +int qman_schedule_fq(struct qman_fq *fq); + +/** + * qman_retire_fq - Retires a FQ + * @fq: the frame queue object to retire + * @flags: FQ flags (QMAN_FQ_STATE*) if retirement completes immediately + * + * Retires the frame queue. This returns zero if it succeeds immediately, +1 if + * the retirement was started asynchronously, otherwise it returns negative for + * failure. When this function returns zero, @flags is set to indicate whether + * the retired FQ is empty and/or whether it has any ORL fragments (to show up + * as ERNs). Otherwise the corresponding flags will be known when a subsequent + * FQRN message shows up on the portal's message ring. + * + * NB, if the retirement is asynchronous (the FQ was in the Truly Scheduled or + * Active state), the completion will be via the message ring as a FQRN - but + * the corresponding callback may occur before this function returns!! Ie. the + * caller should be prepared to accept the callback as the function is called, + * not only once it has returned. + */ +int qman_retire_fq(struct qman_fq *fq, u32 *flags); + +/** + * qman_oos_fq - Puts a FQ "out of service" + * @fq: the frame queue object to be put out-of-service, must be 'retired' + * + * The frame queue must be retired and empty, and if any order restoration list + * was released as ERNs at the time of retirement, they must all be consumed. + */ +int qman_oos_fq(struct qman_fq *fq); + +/* + * qman_volatile_dequeue - Issue a volatile dequeue command + * @fq: the frame queue object to dequeue from + * @flags: a bit-mask of QMAN_VOLATILE_FLAG_*** options + * @vdqcr: bit mask of QM_VDQCR_*** options, as per qm_dqrr_vdqcr_set() + * + * Attempts to lock access to the portal's VDQCR volatile dequeue functionality. + * The function will block and sleep if QMAN_VOLATILE_FLAG_WAIT is specified and + * the VDQCR is already in use, otherwise returns non-zero for failure. If + * QMAN_VOLATILE_FLAG_FINISH is specified, the function will only return once + * the VDQCR command has finished executing (ie. once the callback for the last + * DQRR entry resulting from the VDQCR command has been called). If not using + * the FINISH flag, completion can be determined either by detecting the + * presence of the QM_DQRR_STAT_UNSCHEDULED and QM_DQRR_STAT_DQCR_EXPIRED bits + * in the "stat" parameter passed to the FQ's dequeue callback, or by waiting + * for the QMAN_FQ_STATE_VDQCR bit to disappear. + */ +int qman_volatile_dequeue(struct qman_fq *fq, u32 flags, u32 vdqcr); + +/** + * qman_enqueue - Enqueue a frame to a frame queue + * @fq: the frame queue object to enqueue to + * @fd: a descriptor of the frame to be enqueued + * + * Fills an entry in the EQCR of portal @qm to enqueue the frame described by + * @fd. The descriptor details are copied from @fd to the EQCR entry, the 'pid' + * field is ignored. The return value is non-zero on error, such as ring full. + */ +int qman_enqueue(struct qman_fq *fq, const struct qm_fd *fd); + +/** + * qman_alloc_fqid_range - Allocate a contiguous range of FQIDs + * @result: is set by the API to the base FQID of the allocated range + * @count: the number of FQIDs required + * + * Returns 0 on success, or a negative error code. + */ +int qman_alloc_fqid_range(u32 *result, u32 count); +#define qman_alloc_fqid(result) qman_alloc_fqid_range(result, 1) + +/** + * qman_release_fqid - Release the specified frame queue ID + * @fqid: the FQID to be released back to the resource pool + * + * This function can also be used to seed the allocator with + * FQID ranges that it can subsequently allocate from. + * Returns 0 on success, or a negative error code. + */ +int qman_release_fqid(u32 fqid); + +/** + * qman_query_fq_np - Queries non-programmable FQD fields + * @fq: the frame queue object to be queried + * @np: storage for the queried FQD fields + */ +int qman_query_fq_np(struct qman_fq *fq, struct qm_mcr_queryfq_np *np); + + /* Pool-channel management */ +/** + * qman_alloc_pool_range - Allocate a contiguous range of pool-channel IDs + * @result: is set by the API to the base pool-channel ID of the allocated range + * @count: the number of pool-channel IDs required + * + * Returns 0 on success, or a negative error code. + */ +int qman_alloc_pool_range(u32 *result, u32 count); +#define qman_alloc_pool(result) qman_alloc_pool_range(result, 1) + +/** + * qman_release_pool - Release the specified pool-channel ID + * @id: the pool-chan ID to be released back to the resource pool + * + * This function can also be used to seed the allocator with + * pool-channel ID ranges that it can subsequently allocate from. + * Returns 0 on success, or a negative error code. + */ +int qman_release_pool(u32 id); + + /* CGR management */ +/** + * qman_create_cgr - Register a congestion group object + * @cgr: the 'cgr' object, with fields filled in + * @flags: QMAN_CGR_FLAG_* values + * @opts: optional state of CGR settings + * + * Registers this object to receiving congestion entry/exit callbacks on the + * portal affine to the cpu portal on which this API is executed. If opts is + * NULL then only the callback (cgr->cb) function is registered. If @flags + * contains QMAN_CGR_FLAG_USE_INIT, then an init hw command (which will reset + * any unspecified parameters) will be used rather than a modify hw hardware + * (which only modifies the specified parameters). + */ +int qman_create_cgr(struct qman_cgr *cgr, u32 flags, + struct qm_mcc_initcgr *opts); + +/** + * qman_delete_cgr - Deregisters a congestion group object + * @cgr: the 'cgr' object to deregister + * + * "Unplugs" this CGR object from the portal affine to the cpu on which this API + * is executed. This must be excuted on the same affine portal on which it was + * created. + */ +int qman_delete_cgr(struct qman_cgr *cgr); + +/** + * qman_delete_cgr_safe - Deregisters a congestion group object from any CPU + * @cgr: the 'cgr' object to deregister + * + * This will select the proper CPU and run there qman_delete_cgr(). + */ +void qman_delete_cgr_safe(struct qman_cgr *cgr); + +/** + * qman_update_cgr_safe - Modifies a congestion group object from any CPU + * @cgr: the 'cgr' object to modify + * @opts: state of the CGR settings + * + * This will select the proper CPU and modify the CGR settings. + */ +int qman_update_cgr_safe(struct qman_cgr *cgr, struct qm_mcc_initcgr *opts); + +/** + * qman_query_cgr_congested - Queries CGR's congestion status + * @cgr: the 'cgr' object to query + * @result: returns 'cgr's congestion status, 1 (true) if congested + */ +int qman_query_cgr_congested(struct qman_cgr *cgr, bool *result); + +/** + * qman_alloc_cgrid_range - Allocate a contiguous range of CGR IDs + * @result: is set by the API to the base CGR ID of the allocated range + * @count: the number of CGR IDs required + * + * Returns 0 on success, or a negative error code. + */ +int qman_alloc_cgrid_range(u32 *result, u32 count); +#define qman_alloc_cgrid(result) qman_alloc_cgrid_range(result, 1) + +/** + * qman_release_cgrid - Release the specified CGR ID + * @id: the CGR ID to be released back to the resource pool + * + * This function can also be used to seed the allocator with + * CGR ID ranges that it can subsequently allocate from. + * Returns 0 on success, or a negative error code. + */ +int qman_release_cgrid(u32 id); + +/** + * qman_is_probed - Check if qman is probed + * + * Returns 1 if the qman driver successfully probed, -1 if the qman driver + * failed to probe or 0 if the qman driver did not probed yet. + */ +int qman_is_probed(void); + +/** + * qman_portals_probed - Check if all cpu bound qman portals are probed + * + * Returns 1 if all the required cpu bound qman portals successfully probed, + * -1 if probe errors appeared or 0 if the qman portals did not yet finished + * probing. + */ +int qman_portals_probed(void); + +/** + * qman_dqrr_get_ithresh - Get coalesce interrupt threshold + * @portal: portal to get the value for + * @ithresh: threshold pointer + */ +void qman_dqrr_get_ithresh(struct qman_portal *portal, u8 *ithresh); + +/** + * qman_dqrr_set_ithresh - Set coalesce interrupt threshold + * @portal: portal to set the new value on + * @ithresh: new threshold value + * + * Returns 0 on success, or a negative error code. + */ +int qman_dqrr_set_ithresh(struct qman_portal *portal, u8 ithresh); + +/** + * qman_dqrr_get_iperiod - Get coalesce interrupt period + * @portal: portal to get the value for + * @iperiod: period pointer + */ +void qman_portal_get_iperiod(struct qman_portal *portal, u32 *iperiod); + +/** + * qman_dqrr_set_iperiod - Set coalesce interrupt period + * @portal: portal to set the new value on + * @ithresh: new period value + * + * Returns 0 on success, or a negative error code. + */ +int qman_portal_set_iperiod(struct qman_portal *portal, u32 iperiod); + +#endif /* __FSL_QMAN_H */ |