diff options
Diffstat (limited to 'include/uapi/linux/ipmi_msgdefs.h')
-rw-r--r-- | include/uapi/linux/ipmi_msgdefs.h | 104 |
1 files changed, 104 insertions, 0 deletions
diff --git a/include/uapi/linux/ipmi_msgdefs.h b/include/uapi/linux/ipmi_msgdefs.h new file mode 100644 index 000000000..0934af3b8 --- /dev/null +++ b/include/uapi/linux/ipmi_msgdefs.h @@ -0,0 +1,104 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * ipmi_smi.h + * + * MontaVista IPMI system management interface + * + * Author: MontaVista Software, Inc. + * Corey Minyard <minyard@mvista.com> + * source@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + */ + +#ifndef __LINUX_IPMI_MSGDEFS_H +#define __LINUX_IPMI_MSGDEFS_H + +/* Various definitions for IPMI messages used by almost everything in + the IPMI stack. */ + +/* NetFNs and commands used inside the IPMI stack. */ + +#define IPMI_NETFN_SENSOR_EVENT_REQUEST 0x04 +#define IPMI_NETFN_SENSOR_EVENT_RESPONSE 0x05 +#define IPMI_GET_EVENT_RECEIVER_CMD 0x01 + +#define IPMI_NETFN_APP_REQUEST 0x06 +#define IPMI_NETFN_APP_RESPONSE 0x07 +#define IPMI_GET_DEVICE_ID_CMD 0x01 +#define IPMI_COLD_RESET_CMD 0x02 +#define IPMI_WARM_RESET_CMD 0x03 +#define IPMI_CLEAR_MSG_FLAGS_CMD 0x30 +#define IPMI_GET_DEVICE_GUID_CMD 0x08 +#define IPMI_GET_MSG_FLAGS_CMD 0x31 +#define IPMI_SEND_MSG_CMD 0x34 +#define IPMI_GET_MSG_CMD 0x33 +#define IPMI_SET_BMC_GLOBAL_ENABLES_CMD 0x2e +#define IPMI_GET_BMC_GLOBAL_ENABLES_CMD 0x2f +#define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35 +#define IPMI_GET_CHANNEL_INFO_CMD 0x42 + +/* Bit for BMC global enables. */ +#define IPMI_BMC_RCV_MSG_INTR 0x01 +#define IPMI_BMC_EVT_MSG_INTR 0x02 +#define IPMI_BMC_EVT_MSG_BUFF 0x04 +#define IPMI_BMC_SYS_LOG 0x08 + +#define IPMI_NETFN_STORAGE_REQUEST 0x0a +#define IPMI_NETFN_STORAGE_RESPONSE 0x0b +#define IPMI_ADD_SEL_ENTRY_CMD 0x44 + +#define IPMI_NETFN_FIRMWARE_REQUEST 0x08 +#define IPMI_NETFN_FIRMWARE_RESPONSE 0x09 + +/* The default slave address */ +#define IPMI_BMC_SLAVE_ADDR 0x20 + +/* The BT interface on high-end HP systems supports up to 255 bytes in + * one transfer. Its "virtual" BMC supports some commands that are longer + * than 128 bytes. Use the full 256, plus NetFn/LUN, Cmd, cCode, plus + * some overhead; it's not worth the effort to dynamically size this based + * on the results of the "Get BT Capabilities" command. */ +#define IPMI_MAX_MSG_LENGTH 272 /* multiple of 16 */ + +#define IPMI_CC_NO_ERROR 0x00 +#define IPMI_NODE_BUSY_ERR 0xc0 +#define IPMI_INVALID_COMMAND_ERR 0xc1 +#define IPMI_TIMEOUT_ERR 0xc3 +#define IPMI_ERR_MSG_TRUNCATED 0xc6 +#define IPMI_REQ_LEN_INVALID_ERR 0xc7 +#define IPMI_REQ_LEN_EXCEEDED_ERR 0xc8 +#define IPMI_DEVICE_IN_FW_UPDATE_ERR 0xd1 +#define IPMI_DEVICE_IN_INIT_ERR 0xd2 +#define IPMI_NOT_IN_MY_STATE_ERR 0xd5 /* IPMI 2.0 */ +#define IPMI_LOST_ARBITRATION_ERR 0x81 +#define IPMI_BUS_ERR 0x82 +#define IPMI_NAK_ON_WRITE_ERR 0x83 +#define IPMI_ERR_UNSPECIFIED 0xff + +#define IPMI_CHANNEL_PROTOCOL_IPMB 1 +#define IPMI_CHANNEL_PROTOCOL_ICMB 2 +#define IPMI_CHANNEL_PROTOCOL_SMBUS 4 +#define IPMI_CHANNEL_PROTOCOL_KCS 5 +#define IPMI_CHANNEL_PROTOCOL_SMIC 6 +#define IPMI_CHANNEL_PROTOCOL_BT10 7 +#define IPMI_CHANNEL_PROTOCOL_BT15 8 +#define IPMI_CHANNEL_PROTOCOL_TMODE 9 + +#define IPMI_CHANNEL_MEDIUM_IPMB 1 +#define IPMI_CHANNEL_MEDIUM_ICMB10 2 +#define IPMI_CHANNEL_MEDIUM_ICMB09 3 +#define IPMI_CHANNEL_MEDIUM_8023LAN 4 +#define IPMI_CHANNEL_MEDIUM_ASYNC 5 +#define IPMI_CHANNEL_MEDIUM_OTHER_LAN 6 +#define IPMI_CHANNEL_MEDIUM_PCI_SMBUS 7 +#define IPMI_CHANNEL_MEDIUM_SMBUS1 8 +#define IPMI_CHANNEL_MEDIUM_SMBUS2 9 +#define IPMI_CHANNEL_MEDIUM_USB1 10 +#define IPMI_CHANNEL_MEDIUM_USB2 11 +#define IPMI_CHANNEL_MEDIUM_SYSINTF 12 +#define IPMI_CHANNEL_MEDIUM_OEM_MIN 0x60 +#define IPMI_CHANNEL_MEDIUM_OEM_MAX 0x7f + +#endif /* __LINUX_IPMI_MSGDEFS_H */ |