summaryrefslogtreecommitdiffstats
path: root/lib/Kconfig.debug
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--lib/Kconfig.debug2833
1 files changed, 2833 insertions, 0 deletions
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
new file mode 100644
index 000000000..95541b99a
--- /dev/null
+++ b/lib/Kconfig.debug
@@ -0,0 +1,2833 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Kernel hacking"
+
+menu "printk and dmesg options"
+
+config PRINTK_TIME
+ bool "Show timing information on printks"
+ depends on PRINTK
+ help
+ Selecting this option causes time stamps of the printk()
+ messages to be added to the output of the syslog() system
+ call and at the console.
+
+ The timestamp is always recorded internally, and exported
+ to /dev/kmsg. This flag just specifies if the timestamp should
+ be included, not that the timestamp is recorded.
+
+ The behavior is also controlled by the kernel command line
+ parameter printk.time=1. See Documentation/admin-guide/kernel-parameters.rst
+
+config PRINTK_CALLER
+ bool "Show caller information on printks"
+ depends on PRINTK
+ help
+ Selecting this option causes printk() to add a caller "thread id" (if
+ in task context) or a caller "processor id" (if not in task context)
+ to every message.
+
+ This option is intended for environments where multiple threads
+ concurrently call printk() for many times, for it is difficult to
+ interpret without knowing where these lines (or sometimes individual
+ line which was divided into multiple lines due to race) came from.
+
+ Since toggling after boot makes the code racy, currently there is
+ no option to enable/disable at the kernel command line parameter or
+ sysfs interface.
+
+config STACKTRACE_BUILD_ID
+ bool "Show build ID information in stacktraces"
+ depends on PRINTK
+ help
+ Selecting this option adds build ID information for symbols in
+ stacktraces printed with the printk format '%p[SR]b'.
+
+ This option is intended for distros where debuginfo is not easily
+ accessible but can be downloaded given the build ID of the vmlinux or
+ kernel module where the function is located.
+
+config CONSOLE_LOGLEVEL_DEFAULT
+ int "Default console loglevel (1-15)"
+ range 1 15
+ default "7"
+ help
+ Default loglevel to determine what will be printed on the console.
+
+ Setting a default here is equivalent to passing in loglevel=<x> in
+ the kernel bootargs. loglevel=<x> continues to override whatever
+ value is specified here as well.
+
+ Note: This does not affect the log level of un-prefixed printk()
+ usage in the kernel. That is controlled by the MESSAGE_LOGLEVEL_DEFAULT
+ option.
+
+config CONSOLE_LOGLEVEL_QUIET
+ int "quiet console loglevel (1-15)"
+ range 1 15
+ default "4"
+ help
+ loglevel to use when "quiet" is passed on the kernel commandline.
+
+ When "quiet" is passed on the kernel commandline this loglevel
+ will be used as the loglevel. IOW passing "quiet" will be the
+ equivalent of passing "loglevel=<CONSOLE_LOGLEVEL_QUIET>"
+
+config MESSAGE_LOGLEVEL_DEFAULT
+ int "Default message log level (1-7)"
+ range 1 7
+ default "4"
+ help
+ Default log level for printk statements with no specified priority.
+
+ This was hard-coded to KERN_WARNING since at least 2.6.10 but folks
+ that are auditing their logs closely may want to set it to a lower
+ priority.
+
+ Note: This does not affect what message level gets printed on the console
+ by default. To change that, use loglevel=<x> in the kernel bootargs,
+ or pick a different CONSOLE_LOGLEVEL_DEFAULT configuration value.
+
+config BOOT_PRINTK_DELAY
+ bool "Delay each boot printk message by N milliseconds"
+ depends on DEBUG_KERNEL && PRINTK && GENERIC_CALIBRATE_DELAY
+ help
+ This build option allows you to read kernel boot messages
+ by inserting a short delay after each one. The delay is
+ specified in milliseconds on the kernel command line,
+ using "boot_delay=N".
+
+ It is likely that you would also need to use "lpj=M" to preset
+ the "loops per jiffie" value.
+ See a previous boot log for the "lpj" value to use for your
+ system, and then set "lpj=M" before setting "boot_delay=N".
+ NOTE: Using this option may adversely affect SMP systems.
+ I.e., processors other than the first one may not boot up.
+ BOOT_PRINTK_DELAY also may cause LOCKUP_DETECTOR to detect
+ what it believes to be lockup conditions.
+
+config DYNAMIC_DEBUG
+ bool "Enable dynamic printk() support"
+ default n
+ depends on PRINTK
+ depends on (DEBUG_FS || PROC_FS)
+ select DYNAMIC_DEBUG_CORE
+ help
+
+ Compiles debug level messages into the kernel, which would not
+ otherwise be available at runtime. These messages can then be
+ enabled/disabled based on various levels of scope - per source file,
+ function, module, format string, and line number. This mechanism
+ implicitly compiles in all pr_debug() and dev_dbg() calls, which
+ enlarges the kernel text size by about 2%.
+
+ If a source file is compiled with DEBUG flag set, any
+ pr_debug() calls in it are enabled by default, but can be
+ disabled at runtime as below. Note that DEBUG flag is
+ turned on by many CONFIG_*DEBUG* options.
+
+ Usage:
+
+ Dynamic debugging is controlled via the 'dynamic_debug/control' file,
+ which is contained in the 'debugfs' filesystem or procfs.
+ Thus, the debugfs or procfs filesystem must first be mounted before
+ making use of this feature.
+ We refer the control file as: <debugfs>/dynamic_debug/control. This
+ file contains a list of the debug statements that can be enabled. The
+ format for each line of the file is:
+
+ filename:lineno [module]function flags format
+
+ filename : source file of the debug statement
+ lineno : line number of the debug statement
+ module : module that contains the debug statement
+ function : function that contains the debug statement
+ flags : '=p' means the line is turned 'on' for printing
+ format : the format used for the debug statement
+
+ From a live system:
+
+ nullarbor:~ # cat <debugfs>/dynamic_debug/control
+ # filename:lineno [module]function flags format
+ fs/aio.c:222 [aio]__put_ioctx =_ "__put_ioctx:\040freeing\040%p\012"
+ fs/aio.c:248 [aio]ioctx_alloc =_ "ENOMEM:\040nr_events\040too\040high\012"
+ fs/aio.c:1770 [aio]sys_io_cancel =_ "calling\040cancel\012"
+
+ Example usage:
+
+ // enable the message at line 1603 of file svcsock.c
+ nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
+ <debugfs>/dynamic_debug/control
+
+ // enable all the messages in file svcsock.c
+ nullarbor:~ # echo -n 'file svcsock.c +p' >
+ <debugfs>/dynamic_debug/control
+
+ // enable all the messages in the NFS server module
+ nullarbor:~ # echo -n 'module nfsd +p' >
+ <debugfs>/dynamic_debug/control
+
+ // enable all 12 messages in the function svc_process()
+ nullarbor:~ # echo -n 'func svc_process +p' >
+ <debugfs>/dynamic_debug/control
+
+ // disable all 12 messages in the function svc_process()
+ nullarbor:~ # echo -n 'func svc_process -p' >
+ <debugfs>/dynamic_debug/control
+
+ See Documentation/admin-guide/dynamic-debug-howto.rst for additional
+ information.
+
+config DYNAMIC_DEBUG_CORE
+ bool "Enable core function of dynamic debug support"
+ depends on PRINTK
+ depends on (DEBUG_FS || PROC_FS)
+ help
+ Enable core functional support of dynamic debug. It is useful
+ when you want to tie dynamic debug to your kernel modules with
+ DYNAMIC_DEBUG_MODULE defined for each of them, especially for
+ the case of embedded system where the kernel image size is
+ sensitive for people.
+
+config SYMBOLIC_ERRNAME
+ bool "Support symbolic error names in printf"
+ default y if PRINTK
+ help
+ If you say Y here, the kernel's printf implementation will
+ be able to print symbolic error names such as ENOSPC instead
+ of the number 28. It makes the kernel image slightly larger
+ (about 3KB), but can make the kernel logs easier to read.
+
+config DEBUG_BUGVERBOSE
+ bool "Verbose BUG() reporting (adds 70K)" if DEBUG_KERNEL && EXPERT
+ depends on BUG && (GENERIC_BUG || HAVE_DEBUG_BUGVERBOSE)
+ default y
+ help
+ Say Y here to make BUG() panics output the file name and line number
+ of the BUG call as well as the EIP and oops trace. This aids
+ debugging but costs about 70-100K of memory.
+
+endmenu # "printk and dmesg options"
+
+config DEBUG_KERNEL
+ bool "Kernel debugging"
+ help
+ Say Y here if you are developing drivers or trying to debug and
+ identify kernel problems.
+
+config DEBUG_MISC
+ bool "Miscellaneous debug code"
+ default DEBUG_KERNEL
+ depends on DEBUG_KERNEL
+ help
+ Say Y here if you need to enable miscellaneous debug code that should
+ be under a more specific debug option but isn't.
+
+menu "Compile-time checks and compiler options"
+
+config DEBUG_INFO
+ bool
+ help
+ A kernel debug info option other than "None" has been selected
+ in the "Debug information" choice below, indicating that debug
+ information will be generated for build targets.
+
+# Clang is known to generate .{s,u}leb128 with symbol deltas with DWARF5, which
+# some targets may not support: https://sourceware.org/bugzilla/show_bug.cgi?id=27215
+config AS_HAS_NON_CONST_LEB128
+ def_bool $(as-instr,.uleb128 .Lexpr_end4 - .Lexpr_start3\n.Lexpr_start3:\n.Lexpr_end4:)
+
+choice
+ prompt "Debug information"
+ depends on DEBUG_KERNEL
+ help
+ Selecting something other than "None" results in a kernel image
+ that will include debugging info resulting in a larger kernel image.
+ This adds debug symbols to the kernel and modules (gcc -g), and
+ is needed if you intend to use kernel crashdump or binary object
+ tools like crash, kgdb, LKCD, gdb, etc on the kernel.
+
+ Choose which version of DWARF debug info to emit. If unsure,
+ select "Toolchain default".
+
+config DEBUG_INFO_NONE
+ bool "Disable debug information"
+ help
+ Do not build the kernel with debugging information, which will
+ result in a faster and smaller build.
+
+config DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
+ bool "Rely on the toolchain's implicit default DWARF version"
+ select DEBUG_INFO
+ depends on !CC_IS_CLANG || AS_IS_LLVM || CLANG_VERSION < 140000 || (AS_IS_GNU && AS_VERSION >= 23502 && AS_HAS_NON_CONST_LEB128)
+ help
+ The implicit default version of DWARF debug info produced by a
+ toolchain changes over time.
+
+ This can break consumers of the debug info that haven't upgraded to
+ support newer revisions, and prevent testing newer versions, but
+ those should be less common scenarios.
+
+config DEBUG_INFO_DWARF4
+ bool "Generate DWARF Version 4 debuginfo"
+ select DEBUG_INFO
+ depends on !CC_IS_CLANG || AS_IS_LLVM || (AS_IS_GNU && AS_VERSION >= 23502)
+ help
+ Generate DWARF v4 debug info. This requires gcc 4.5+, binutils 2.35.2
+ if using clang without clang's integrated assembler, and gdb 7.0+.
+
+ If you have consumers of DWARF debug info that are not ready for
+ newer revisions of DWARF, you may wish to choose this or have your
+ config select this.
+
+config DEBUG_INFO_DWARF5
+ bool "Generate DWARF Version 5 debuginfo"
+ select DEBUG_INFO
+ depends on !CC_IS_CLANG || AS_IS_LLVM || (AS_IS_GNU && AS_VERSION >= 23502 && AS_HAS_NON_CONST_LEB128)
+ help
+ Generate DWARF v5 debug info. Requires binutils 2.35.2, gcc 5.0+ (gcc
+ 5.0+ accepts the -gdwarf-5 flag but only had partial support for some
+ draft features until 7.0), and gdb 8.0+.
+
+ Changes to the structure of debug info in Version 5 allow for around
+ 15-18% savings in resulting image and debug info section sizes as
+ compared to DWARF Version 4. DWARF Version 5 standardizes previous
+ extensions such as accelerators for symbol indexing and the format
+ for fission (.dwo/.dwp) files. Users may not want to select this
+ config if they rely on tooling that has not yet been updated to
+ support DWARF Version 5.
+
+endchoice # "Debug information"
+
+if DEBUG_INFO
+
+config DEBUG_INFO_REDUCED
+ bool "Reduce debugging information"
+ help
+ If you say Y here gcc is instructed to generate less debugging
+ information for structure types. This means that tools that
+ need full debugging information (like kgdb or systemtap) won't
+ be happy. But if you merely need debugging information to
+ resolve line numbers there is no loss. Advantage is that
+ build directory object sizes shrink dramatically over a full
+ DEBUG_INFO build and compile times are reduced too.
+ Only works with newer gcc versions.
+
+config DEBUG_INFO_COMPRESSED
+ bool "Compressed debugging information"
+ depends on $(cc-option,-gz=zlib)
+ depends on $(ld-option,--compress-debug-sections=zlib)
+ help
+ Compress the debug information using zlib. Requires GCC 5.0+ or Clang
+ 5.0+, binutils 2.26+, and zlib.
+
+ Users of dpkg-deb via scripts/package/builddeb may find an increase in
+ size of their debug .deb packages with this config set, due to the
+ debug info being compressed with zlib, then the object files being
+ recompressed with a different compression scheme. But this is still
+ preferable to setting $KDEB_COMPRESS to "none" which would be even
+ larger.
+
+config DEBUG_INFO_SPLIT
+ bool "Produce split debuginfo in .dwo files"
+ depends on $(cc-option,-gsplit-dwarf)
+ help
+ Generate debug info into separate .dwo files. This significantly
+ reduces the build directory size for builds with DEBUG_INFO,
+ because it stores the information only once on disk in .dwo
+ files instead of multiple times in object files and executables.
+ In addition the debug information is also compressed.
+
+ Requires recent gcc (4.7+) and recent gdb/binutils.
+ Any tool that packages or reads debug information would need
+ to know about the .dwo files and include them.
+ Incompatible with older versions of ccache.
+
+config DEBUG_INFO_BTF
+ bool "Generate BTF typeinfo"
+ depends on !DEBUG_INFO_SPLIT && !DEBUG_INFO_REDUCED
+ depends on !GCC_PLUGIN_RANDSTRUCT || COMPILE_TEST
+ depends on BPF_SYSCALL
+ depends on !DEBUG_INFO_DWARF5 || PAHOLE_VERSION >= 121
+ help
+ Generate deduplicated BTF type information from DWARF debug info.
+ Turning this on expects presence of pahole tool, which will convert
+ DWARF type info into equivalent deduplicated BTF type info.
+
+config PAHOLE_HAS_SPLIT_BTF
+ def_bool PAHOLE_VERSION >= 119
+
+config PAHOLE_HAS_BTF_TAG
+ def_bool PAHOLE_VERSION >= 123
+ depends on CC_IS_CLANG
+ help
+ Decide whether pahole emits btf_tag attributes (btf_type_tag and
+ btf_decl_tag) or not. Currently only clang compiler implements
+ these attributes, so make the config depend on CC_IS_CLANG.
+
+config PAHOLE_HAS_LANG_EXCLUDE
+ def_bool PAHOLE_VERSION >= 124
+ help
+ Support for the --lang_exclude flag which makes pahole exclude
+ compilation units from the supplied language. Used in Kbuild to
+ omit Rust CUs which are not supported in version 1.24 of pahole,
+ otherwise it would emit malformed kernel and module binaries when
+ using DEBUG_INFO_BTF_MODULES.
+
+config DEBUG_INFO_BTF_MODULES
+ def_bool y
+ depends on DEBUG_INFO_BTF && MODULES && PAHOLE_HAS_SPLIT_BTF
+ help
+ Generate compact split BTF type information for kernel modules.
+
+config MODULE_ALLOW_BTF_MISMATCH
+ bool "Allow loading modules with non-matching BTF type info"
+ depends on DEBUG_INFO_BTF_MODULES
+ help
+ For modules whose split BTF does not match vmlinux, load without
+ BTF rather than refusing to load. The default behavior with
+ module BTF enabled is to reject modules with such mismatches;
+ this option will still load module BTF where possible but ignore
+ it when a mismatch is found.
+
+config GDB_SCRIPTS
+ bool "Provide GDB scripts for kernel debugging"
+ help
+ This creates the required links to GDB helper scripts in the
+ build directory. If you load vmlinux into gdb, the helper
+ scripts will be automatically imported by gdb as well, and
+ additional functions are available to analyze a Linux kernel
+ instance. See Documentation/dev-tools/gdb-kernel-debugging.rst
+ for further details.
+
+endif # DEBUG_INFO
+
+config FRAME_WARN
+ int "Warn for stack frames larger than"
+ range 0 8192
+ default 0 if KMSAN
+ default 2048 if GCC_PLUGIN_LATENT_ENTROPY
+ default 2048 if PARISC
+ default 1536 if (!64BIT && XTENSA)
+ default 1280 if KASAN && !64BIT
+ default 1024 if !64BIT
+ default 2048 if 64BIT
+ help
+ Tell the compiler to warn at build time for stack frames larger than this.
+ Setting this too low will cause a lot of warnings.
+ Setting it to 0 disables the warning.
+
+config STRIP_ASM_SYMS
+ bool "Strip assembler-generated symbols during link"
+ default n
+ help
+ Strip internal assembler-generated symbols during a link (symbols
+ that look like '.Lxxx') so they don't pollute the output of
+ get_wchan() and suchlike.
+
+config READABLE_ASM
+ bool "Generate readable assembler code"
+ depends on DEBUG_KERNEL
+ depends on CC_IS_GCC
+ help
+ Disable some compiler optimizations that tend to generate human unreadable
+ assembler output. This may make the kernel slightly slower, but it helps
+ to keep kernel developers who have to stare a lot at assembler listings
+ sane.
+
+config HEADERS_INSTALL
+ bool "Install uapi headers to usr/include"
+ depends on !UML
+ help
+ This option will install uapi headers (headers exported to user-space)
+ into the usr/include directory for use during the kernel build.
+ This is unneeded for building the kernel itself, but needed for some
+ user-space program samples. It is also needed by some features such
+ as uapi header sanity checks.
+
+config DEBUG_SECTION_MISMATCH
+ bool "Enable full Section mismatch analysis"
+ depends on CC_IS_GCC
+ help
+ The section mismatch analysis checks if there are illegal
+ references from one section to another section.
+ During linktime or runtime, some sections are dropped;
+ any use of code/data previously in these sections would
+ most likely result in an oops.
+ In the code, functions and variables are annotated with
+ __init,, etc. (see the full list in include/linux/init.h),
+ which results in the code/data being placed in specific sections.
+ The section mismatch analysis is always performed after a full
+ kernel build, and enabling this option causes the following
+ additional step to occur:
+ - Add the option -fno-inline-functions-called-once to gcc commands.
+ When inlining a function annotated with __init in a non-init
+ function, we would lose the section information and thus
+ the analysis would not catch the illegal reference.
+ This option tells gcc to inline less (but it does result in
+ a larger kernel).
+
+config SECTION_MISMATCH_WARN_ONLY
+ bool "Make section mismatch errors non-fatal"
+ default y
+ help
+ If you say N here, the build process will fail if there are any
+ section mismatch, instead of just throwing warnings.
+
+ If unsure, say Y.
+
+config DEBUG_FORCE_FUNCTION_ALIGN_64B
+ bool "Force all function address 64B aligned"
+ depends on EXPERT && (X86_64 || ARM64 || PPC32 || PPC64 || ARC)
+ help
+ There are cases that a commit from one domain changes the function
+ address alignment of other domains, and cause magic performance
+ bump (regression or improvement). Enable this option will help to
+ verify if the bump is caused by function alignment changes, while
+ it will slightly increase the kernel size and affect icache usage.
+
+ It is mainly for debug and performance tuning use.
+
+#
+# Select this config option from the architecture Kconfig, if it
+# is preferred to always offer frame pointers as a config
+# option on the architecture (regardless of KERNEL_DEBUG):
+#
+config ARCH_WANT_FRAME_POINTERS
+ bool
+
+config FRAME_POINTER
+ bool "Compile the kernel with frame pointers"
+ depends on DEBUG_KERNEL && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS
+ default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
+ help
+ If you say Y here the resulting kernel image will be slightly
+ larger and slower, but it gives very useful debugging information
+ in case of kernel bugs. (precise oopses/stacktraces/warnings)
+
+config OBJTOOL
+ bool
+
+config STACK_VALIDATION
+ bool "Compile-time stack metadata validation"
+ depends on HAVE_STACK_VALIDATION && UNWINDER_FRAME_POINTER
+ select OBJTOOL
+ default n
+ help
+ Validate frame pointer rules at compile-time. This helps ensure that
+ runtime stack traces are more reliable.
+
+ For more information, see
+ tools/objtool/Documentation/objtool.txt.
+
+config NOINSTR_VALIDATION
+ bool
+ depends on HAVE_NOINSTR_VALIDATION && DEBUG_ENTRY
+ select OBJTOOL
+ default y
+
+config VMLINUX_MAP
+ bool "Generate vmlinux.map file when linking"
+ depends on EXPERT
+ help
+ Selecting this option will pass "-Map=vmlinux.map" to ld
+ when linking vmlinux. That file can be useful for verifying
+ and debugging magic section games, and for seeing which
+ pieces of code get eliminated with
+ CONFIG_LD_DEAD_CODE_DATA_ELIMINATION.
+
+config DEBUG_FORCE_WEAK_PER_CPU
+ bool "Force weak per-cpu definitions"
+ depends on DEBUG_KERNEL
+ help
+ s390 and alpha require percpu variables in modules to be
+ defined weak to work around addressing range issue which
+ puts the following two restrictions on percpu variable
+ definitions.
+
+ 1. percpu symbols must be unique whether static or not
+ 2. percpu variables can't be defined inside a function
+
+ To ensure that generic code follows the above rules, this
+ option forces all percpu variables to be defined as weak.
+
+endmenu # "Compiler options"
+
+menu "Generic Kernel Debugging Instruments"
+
+config MAGIC_SYSRQ
+ bool "Magic SysRq key"
+ depends on !UML
+ help
+ If you say Y here, you will have some control over the system even
+ if the system crashes for example during kernel debugging (e.g., you
+ will be able to flush the buffer cache to disk, reboot the system
+ immediately or dump some status information). This is accomplished
+ by pressing various keys while holding SysRq (Alt+PrintScreen). It
+ also works on a serial console (on PC hardware at least), if you
+ send a BREAK and then within 5 seconds a command keypress. The
+ keys are documented in <file:Documentation/admin-guide/sysrq.rst>.
+ Don't say Y unless you really know what this hack does.
+
+config MAGIC_SYSRQ_DEFAULT_ENABLE
+ hex "Enable magic SysRq key functions by default"
+ depends on MAGIC_SYSRQ
+ default 0x1
+ help
+ Specifies which SysRq key functions are enabled by default.
+ This may be set to 1 or 0 to enable or disable them all, or
+ to a bitmask as described in Documentation/admin-guide/sysrq.rst.
+
+config MAGIC_SYSRQ_SERIAL
+ bool "Enable magic SysRq key over serial"
+ depends on MAGIC_SYSRQ
+ default y
+ help
+ Many embedded boards have a disconnected TTL level serial which can
+ generate some garbage that can lead to spurious false sysrq detects.
+ This option allows you to decide whether you want to enable the
+ magic SysRq key.
+
+config MAGIC_SYSRQ_SERIAL_SEQUENCE
+ string "Char sequence that enables magic SysRq over serial"
+ depends on MAGIC_SYSRQ_SERIAL
+ default ""
+ help
+ Specifies a sequence of characters that can follow BREAK to enable
+ SysRq on a serial console.
+
+ If unsure, leave an empty string and the option will not be enabled.
+
+config DEBUG_FS
+ bool "Debug Filesystem"
+ help
+ debugfs is a virtual file system that kernel developers use to put
+ debugging files into. Enable this option to be able to read and
+ write to these files.
+
+ For detailed documentation on the debugfs API, see
+ Documentation/filesystems/.
+
+ If unsure, say N.
+
+choice
+ prompt "Debugfs default access"
+ depends on DEBUG_FS
+ default DEBUG_FS_ALLOW_ALL
+ help
+ This selects the default access restrictions for debugfs.
+ It can be overridden with kernel command line option
+ debugfs=[on,no-mount,off]. The restrictions apply for API access
+ and filesystem registration.
+
+config DEBUG_FS_ALLOW_ALL
+ bool "Access normal"
+ help
+ No restrictions apply. Both API and filesystem registration
+ is on. This is the normal default operation.
+
+config DEBUG_FS_DISALLOW_MOUNT
+ bool "Do not register debugfs as filesystem"
+ help
+ The API is open but filesystem is not loaded. Clients can still do
+ their work and read with debug tools that do not need
+ debugfs filesystem.
+
+config DEBUG_FS_ALLOW_NONE
+ bool "No access"
+ help
+ Access is off. Clients get -PERM when trying to create nodes in
+ debugfs tree and debugfs is not registered as a filesystem.
+ Client can then back-off or continue without debugfs access.
+
+endchoice
+
+source "lib/Kconfig.kgdb"
+source "lib/Kconfig.ubsan"
+source "lib/Kconfig.kcsan"
+
+endmenu
+
+menu "Networking Debugging"
+
+source "net/Kconfig.debug"
+
+endmenu # "Networking Debugging"
+
+menu "Memory Debugging"
+
+source "mm/Kconfig.debug"
+
+config DEBUG_OBJECTS
+ bool "Debug object operations"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here, additional code will be inserted into the
+ kernel to track the life time of various objects and validate
+ the operations on those objects.
+
+config DEBUG_OBJECTS_SELFTEST
+ bool "Debug objects selftest"
+ depends on DEBUG_OBJECTS
+ help
+ This enables the selftest of the object debug code.
+
+config DEBUG_OBJECTS_FREE
+ bool "Debug objects in freed memory"
+ depends on DEBUG_OBJECTS
+ help
+ This enables checks whether a k/v free operation frees an area
+ which contains an object which has not been deactivated
+ properly. This can make kmalloc/kfree-intensive workloads
+ much slower.
+
+config DEBUG_OBJECTS_TIMERS
+ bool "Debug timer objects"
+ depends on DEBUG_OBJECTS
+ help
+ If you say Y here, additional code will be inserted into the
+ timer routines to track the life time of timer objects and
+ validate the timer operations.
+
+config DEBUG_OBJECTS_WORK
+ bool "Debug work objects"
+ depends on DEBUG_OBJECTS
+ help
+ If you say Y here, additional code will be inserted into the
+ work queue routines to track the life time of work objects and
+ validate the work operations.
+
+config DEBUG_OBJECTS_RCU_HEAD
+ bool "Debug RCU callbacks objects"
+ depends on DEBUG_OBJECTS
+ help
+ Enable this to turn on debugging of RCU list heads (call_rcu() usage).
+
+config DEBUG_OBJECTS_PERCPU_COUNTER
+ bool "Debug percpu counter objects"
+ depends on DEBUG_OBJECTS
+ help
+ If you say Y here, additional code will be inserted into the
+ percpu counter routines to track the life time of percpu counter
+ objects and validate the percpu counter operations.
+
+config DEBUG_OBJECTS_ENABLE_DEFAULT
+ int "debug_objects bootup default value (0-1)"
+ range 0 1
+ default "1"
+ depends on DEBUG_OBJECTS
+ help
+ Debug objects boot parameter default value
+
+config SHRINKER_DEBUG
+ bool "Enable shrinker debugging support"
+ depends on DEBUG_FS
+ help
+ Say Y to enable the shrinker debugfs interface which provides
+ visibility into the kernel memory shrinkers subsystem.
+ Disable it to avoid an extra memory footprint.
+
+config HAVE_DEBUG_KMEMLEAK
+ bool
+
+config DEBUG_KMEMLEAK
+ bool "Kernel memory leak detector"
+ depends on DEBUG_KERNEL && HAVE_DEBUG_KMEMLEAK
+ select DEBUG_FS
+ select STACKTRACE if STACKTRACE_SUPPORT
+ select KALLSYMS
+ select CRC32
+ help
+ Say Y here if you want to enable the memory leak
+ detector. The memory allocation/freeing is traced in a way
+ similar to the Boehm's conservative garbage collector, the
+ difference being that the orphan objects are not freed but
+ only shown in /sys/kernel/debug/kmemleak. Enabling this
+ feature will introduce an overhead to memory
+ allocations. See Documentation/dev-tools/kmemleak.rst for more
+ details.
+
+ Enabling DEBUG_SLAB or SLUB_DEBUG may increase the chances
+ of finding leaks due to the slab objects poisoning.
+
+ In order to access the kmemleak file, debugfs needs to be
+ mounted (usually at /sys/kernel/debug).
+
+config DEBUG_KMEMLEAK_MEM_POOL_SIZE
+ int "Kmemleak memory pool size"
+ depends on DEBUG_KMEMLEAK
+ range 200 1000000
+ default 16000
+ help
+ Kmemleak must track all the memory allocations to avoid
+ reporting false positives. Since memory may be allocated or
+ freed before kmemleak is fully initialised, use a static pool
+ of metadata objects to track such callbacks. After kmemleak is
+ fully initialised, this memory pool acts as an emergency one
+ if slab allocations fail.
+
+config DEBUG_KMEMLEAK_TEST
+ tristate "Simple test for the kernel memory leak detector"
+ depends on DEBUG_KMEMLEAK && m
+ help
+ This option enables a module that explicitly leaks memory.
+
+ If unsure, say N.
+
+config DEBUG_KMEMLEAK_DEFAULT_OFF
+ bool "Default kmemleak to off"
+ depends on DEBUG_KMEMLEAK
+ help
+ Say Y here to disable kmemleak by default. It can then be enabled
+ on the command line via kmemleak=on.
+
+config DEBUG_KMEMLEAK_AUTO_SCAN
+ bool "Enable kmemleak auto scan thread on boot up"
+ default y
+ depends on DEBUG_KMEMLEAK
+ help
+ Depending on the cpu, kmemleak scan may be cpu intensive and can
+ stall user tasks at times. This option enables/disables automatic
+ kmemleak scan at boot up.
+
+ Say N here to disable kmemleak auto scan thread to stop automatic
+ scanning. Disabling this option disables automatic reporting of
+ memory leaks.
+
+ If unsure, say Y.
+
+config DEBUG_STACK_USAGE
+ bool "Stack utilization instrumentation"
+ depends on DEBUG_KERNEL && !IA64
+ help
+ Enables the display of the minimum amount of free stack which each
+ task has ever had available in the sysrq-T and sysrq-P debug output.
+
+ This option will slow down process creation somewhat.
+
+config SCHED_STACK_END_CHECK
+ bool "Detect stack corruption on calls to schedule()"
+ depends on DEBUG_KERNEL
+ default n
+ help
+ This option checks for a stack overrun on calls to schedule().
+ If the stack end location is found to be over written always panic as
+ the content of the corrupted region can no longer be trusted.
+ This is to ensure no erroneous behaviour occurs which could result in
+ data corruption or a sporadic crash at a later stage once the region
+ is examined. The runtime overhead introduced is minimal.
+
+config ARCH_HAS_DEBUG_VM_PGTABLE
+ bool
+ help
+ An architecture should select this when it can successfully
+ build and run DEBUG_VM_PGTABLE.
+
+config DEBUG_VM_IRQSOFF
+ def_bool DEBUG_VM && !PREEMPT_RT
+
+config DEBUG_VM
+ bool "Debug VM"
+ depends on DEBUG_KERNEL
+ help
+ Enable this to turn on extended checks in the virtual-memory system
+ that may impact performance.
+
+ If unsure, say N.
+
+config DEBUG_VM_MAPLE_TREE
+ bool "Debug VM maple trees"
+ depends on DEBUG_VM
+ select DEBUG_MAPLE_TREE
+ help
+ Enable VM maple tree debugging information and extra validations.
+
+ If unsure, say N.
+
+config DEBUG_VM_RB
+ bool "Debug VM red-black trees"
+ depends on DEBUG_VM
+ help
+ Enable VM red-black tree debugging information and extra validations.
+
+ If unsure, say N.
+
+config DEBUG_VM_PGFLAGS
+ bool "Debug page-flags operations"
+ depends on DEBUG_VM
+ help
+ Enables extra validation on page flags operations.
+
+ If unsure, say N.
+
+config DEBUG_VM_PGTABLE
+ bool "Debug arch page table for semantics compliance"
+ depends on MMU
+ depends on ARCH_HAS_DEBUG_VM_PGTABLE
+ default y if DEBUG_VM
+ help
+ This option provides a debug method which can be used to test
+ architecture page table helper functions on various platforms in
+ verifying if they comply with expected generic MM semantics. This
+ will help architecture code in making sure that any changes or
+ new additions of these helpers still conform to expected
+ semantics of the generic MM. Platforms will have to opt in for
+ this through ARCH_HAS_DEBUG_VM_PGTABLE.
+
+ If unsure, say N.
+
+config ARCH_HAS_DEBUG_VIRTUAL
+ bool
+
+config DEBUG_VIRTUAL
+ bool "Debug VM translations"
+ depends on DEBUG_KERNEL && ARCH_HAS_DEBUG_VIRTUAL
+ help
+ Enable some costly sanity checks in virtual to page code. This can
+ catch mistakes with virt_to_page() and friends.
+
+ If unsure, say N.
+
+config DEBUG_NOMMU_REGIONS
+ bool "Debug the global anon/private NOMMU mapping region tree"
+ depends on DEBUG_KERNEL && !MMU
+ help
+ This option causes the global tree of anonymous and private mapping
+ regions to be regularly checked for invalid topology.
+
+config DEBUG_MEMORY_INIT
+ bool "Debug memory initialisation" if EXPERT
+ default !EXPERT
+ help
+ Enable this for additional checks during memory initialisation.
+ The sanity checks verify aspects of the VM such as the memory model
+ and other information provided by the architecture. Verbose
+ information will be printed at KERN_DEBUG loglevel depending
+ on the mminit_loglevel= command-line option.
+
+ If unsure, say Y
+
+config MEMORY_NOTIFIER_ERROR_INJECT
+ tristate "Memory hotplug notifier error injection module"
+ depends on MEMORY_HOTPLUG && NOTIFIER_ERROR_INJECTION
+ help
+ This option provides the ability to inject artificial errors to
+ memory hotplug notifier chain callbacks. It is controlled through
+ debugfs interface under /sys/kernel/debug/notifier-error-inject/memory
+
+ If the notifier call chain should be failed with some events
+ notified, write the error code to "actions/<notifier event>/error".
+
+ Example: Inject memory hotplug offline error (-12 == -ENOMEM)
+
+ # cd /sys/kernel/debug/notifier-error-inject/memory
+ # echo -12 > actions/MEM_GOING_OFFLINE/error
+ # echo offline > /sys/devices/system/memory/memoryXXX/state
+ bash: echo: write error: Cannot allocate memory
+
+ To compile this code as a module, choose M here: the module will
+ be called memory-notifier-error-inject.
+
+ If unsure, say N.
+
+config DEBUG_PER_CPU_MAPS
+ bool "Debug access to per_cpu maps"
+ depends on DEBUG_KERNEL
+ depends on SMP
+ help
+ Say Y to verify that the per_cpu map being accessed has
+ been set up. This adds a fair amount of code to kernel memory
+ and decreases performance.
+
+ Say N if unsure.
+
+config DEBUG_KMAP_LOCAL
+ bool "Debug kmap_local temporary mappings"
+ depends on DEBUG_KERNEL && KMAP_LOCAL
+ help
+ This option enables additional error checking for the kmap_local
+ infrastructure. Disable for production use.
+
+config ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP
+ bool
+
+config DEBUG_KMAP_LOCAL_FORCE_MAP
+ bool "Enforce kmap_local temporary mappings"
+ depends on DEBUG_KERNEL && ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP
+ select KMAP_LOCAL
+ select DEBUG_KMAP_LOCAL
+ help
+ This option enforces temporary mappings through the kmap_local
+ mechanism for non-highmem pages and on non-highmem systems.
+ Disable this for production systems!
+
+config DEBUG_HIGHMEM
+ bool "Highmem debugging"
+ depends on DEBUG_KERNEL && HIGHMEM
+ select DEBUG_KMAP_LOCAL_FORCE_MAP if ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP
+ select DEBUG_KMAP_LOCAL
+ help
+ This option enables additional error checking for high memory
+ systems. Disable for production systems.
+
+config HAVE_DEBUG_STACKOVERFLOW
+ bool
+
+config DEBUG_STACKOVERFLOW
+ bool "Check for stack overflows"
+ depends on DEBUG_KERNEL && HAVE_DEBUG_STACKOVERFLOW
+ help
+ Say Y here if you want to check for overflows of kernel, IRQ
+ and exception stacks (if your architecture uses them). This
+ option will show detailed messages if free stack space drops
+ below a certain limit.
+
+ These kinds of bugs usually occur when call-chains in the
+ kernel get too deep, especially when interrupts are
+ involved.
+
+ Use this in cases where you see apparently random memory
+ corruption, especially if it appears in 'struct thread_info'
+
+ If in doubt, say "N".
+
+source "lib/Kconfig.kasan"
+source "lib/Kconfig.kfence"
+source "lib/Kconfig.kmsan"
+
+endmenu # "Memory Debugging"
+
+config DEBUG_SHIRQ
+ bool "Debug shared IRQ handlers"
+ depends on DEBUG_KERNEL
+ help
+ Enable this to generate a spurious interrupt just before a shared
+ interrupt handler is deregistered (generating one when registering
+ is currently disabled). Drivers need to handle this correctly. Some
+ don't and need to be caught.
+
+menu "Debug Oops, Lockups and Hangs"
+
+config PANIC_ON_OOPS
+ bool "Panic on Oops"
+ help
+ Say Y here to enable the kernel to panic when it oopses. This
+ has the same effect as setting oops=panic on the kernel command
+ line.
+
+ This feature is useful to ensure that the kernel does not do
+ anything erroneous after an oops which could result in data
+ corruption or other issues.
+
+ Say N if unsure.
+
+config PANIC_ON_OOPS_VALUE
+ int
+ range 0 1
+ default 0 if !PANIC_ON_OOPS
+ default 1 if PANIC_ON_OOPS
+
+config PANIC_TIMEOUT
+ int "panic timeout"
+ default 0
+ help
+ Set the timeout value (in seconds) until a reboot occurs when
+ the kernel panics. If n = 0, then we wait forever. A timeout
+ value n > 0 will wait n seconds before rebooting, while a timeout
+ value n < 0 will reboot immediately.
+
+config LOCKUP_DETECTOR
+ bool
+
+config SOFTLOCKUP_DETECTOR
+ bool "Detect Soft Lockups"
+ depends on DEBUG_KERNEL && !S390
+ select LOCKUP_DETECTOR
+ help
+ Say Y here to enable the kernel to act as a watchdog to detect
+ soft lockups.
+
+ Softlockups are bugs that cause the kernel to loop in kernel
+ mode for more than 20 seconds, without giving other tasks a
+ chance to run. The current stack trace is displayed upon
+ detection and the system will stay locked up.
+
+config BOOTPARAM_SOFTLOCKUP_PANIC
+ bool "Panic (Reboot) On Soft Lockups"
+ depends on SOFTLOCKUP_DETECTOR
+ help
+ Say Y here to enable the kernel to panic on "soft lockups",
+ which are bugs that cause the kernel to loop in kernel
+ mode for more than 20 seconds (configurable using the watchdog_thresh
+ sysctl), without giving other tasks a chance to run.
+
+ The panic can be used in combination with panic_timeout,
+ to cause the system to reboot automatically after a
+ lockup has been detected. This feature is useful for
+ high-availability systems that have uptime guarantees and
+ where a lockup must be resolved ASAP.
+
+ Say N if unsure.
+
+config HARDLOCKUP_DETECTOR_PERF
+ bool
+ select SOFTLOCKUP_DETECTOR
+
+#
+# Enables a timestamp based low pass filter to compensate for perf based
+# hard lockup detection which runs too fast due to turbo modes.
+#
+config HARDLOCKUP_CHECK_TIMESTAMP
+ bool
+
+#
+# arch/ can define HAVE_HARDLOCKUP_DETECTOR_ARCH to provide their own hard
+# lockup detector rather than the perf based detector.
+#
+config HARDLOCKUP_DETECTOR
+ bool "Detect Hard Lockups"
+ depends on DEBUG_KERNEL && !S390
+ depends on HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_ARCH
+ select LOCKUP_DETECTOR
+ select HARDLOCKUP_DETECTOR_PERF if HAVE_HARDLOCKUP_DETECTOR_PERF
+ help
+ Say Y here to enable the kernel to act as a watchdog to detect
+ hard lockups.
+
+ Hardlockups are bugs that cause the CPU to loop in kernel mode
+ for more than 10 seconds, without letting other interrupts have a
+ chance to run. The current stack trace is displayed upon detection
+ and the system will stay locked up.
+
+config BOOTPARAM_HARDLOCKUP_PANIC
+ bool "Panic (Reboot) On Hard Lockups"
+ depends on HARDLOCKUP_DETECTOR
+ help
+ Say Y here to enable the kernel to panic on "hard lockups",
+ which are bugs that cause the kernel to loop in kernel
+ mode with interrupts disabled for more than 10 seconds (configurable
+ using the watchdog_thresh sysctl).
+
+ Say N if unsure.
+
+config DETECT_HUNG_TASK
+ bool "Detect Hung Tasks"
+ depends on DEBUG_KERNEL
+ default SOFTLOCKUP_DETECTOR
+ help
+ Say Y here to enable the kernel to detect "hung tasks",
+ which are bugs that cause the task to be stuck in
+ uninterruptible "D" state indefinitely.
+
+ When a hung task is detected, the kernel will print the
+ current stack trace (which you should report), but the
+ task will stay in uninterruptible state. If lockdep is
+ enabled then all held locks will also be reported. This
+ feature has negligible overhead.
+
+config DEFAULT_HUNG_TASK_TIMEOUT
+ int "Default timeout for hung task detection (in seconds)"
+ depends on DETECT_HUNG_TASK
+ default 120
+ help
+ This option controls the default timeout (in seconds) used
+ to determine when a task has become non-responsive and should
+ be considered hung.
+
+ It can be adjusted at runtime via the kernel.hung_task_timeout_secs
+ sysctl or by writing a value to
+ /proc/sys/kernel/hung_task_timeout_secs.
+
+ A timeout of 0 disables the check. The default is two minutes.
+ Keeping the default should be fine in most cases.
+
+config BOOTPARAM_HUNG_TASK_PANIC
+ bool "Panic (Reboot) On Hung Tasks"
+ depends on DETECT_HUNG_TASK
+ help
+ Say Y here to enable the kernel to panic on "hung tasks",
+ which are bugs that cause the kernel to leave a task stuck
+ in uninterruptible "D" state.
+
+ The panic can be used in combination with panic_timeout,
+ to cause the system to reboot automatically after a
+ hung task has been detected. This feature is useful for
+ high-availability systems that have uptime guarantees and
+ where a hung tasks must be resolved ASAP.
+
+ Say N if unsure.
+
+config WQ_WATCHDOG
+ bool "Detect Workqueue Stalls"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here to enable stall detection on workqueues. If a
+ worker pool doesn't make forward progress on a pending work
+ item for over a given amount of time, 30s by default, a
+ warning message is printed along with dump of workqueue
+ state. This can be configured through kernel parameter
+ "workqueue.watchdog_thresh" and its sysfs counterpart.
+
+config TEST_LOCKUP
+ tristate "Test module to generate lockups"
+ depends on m
+ help
+ This builds the "test_lockup" module that helps to make sure
+ that watchdogs and lockup detectors are working properly.
+
+ Depending on module parameters it could emulate soft or hard
+ lockup, "hung task", or locking arbitrary lock for a long time.
+ Also it could generate series of lockups with cooling-down periods.
+
+ If unsure, say N.
+
+endmenu # "Debug lockups and hangs"
+
+menu "Scheduler Debugging"
+
+config SCHED_DEBUG
+ bool "Collect scheduler debugging info"
+ depends on DEBUG_KERNEL && PROC_FS
+ default y
+ help
+ If you say Y here, the /proc/sched_debug file will be provided
+ that can help debug the scheduler. The runtime overhead of this
+ option is minimal.
+
+config SCHED_INFO
+ bool
+ default n
+
+config SCHEDSTATS
+ bool "Collect scheduler statistics"
+ depends on DEBUG_KERNEL && PROC_FS
+ select SCHED_INFO
+ help
+ If you say Y here, additional code will be inserted into the
+ scheduler and related routines to collect statistics about
+ scheduler behavior and provide them in /proc/schedstat. These
+ stats may be useful for both tuning and debugging the scheduler
+ If you aren't debugging the scheduler or trying to tune a specific
+ application, you can say N to avoid the very slight overhead
+ this adds.
+
+endmenu
+
+config DEBUG_TIMEKEEPING
+ bool "Enable extra timekeeping sanity checking"
+ help
+ This option will enable additional timekeeping sanity checks
+ which may be helpful when diagnosing issues where timekeeping
+ problems are suspected.
+
+ This may include checks in the timekeeping hotpaths, so this
+ option may have a (very small) performance impact to some
+ workloads.
+
+ If unsure, say N.
+
+config DEBUG_PREEMPT
+ bool "Debug preemptible kernel"
+ depends on DEBUG_KERNEL && PREEMPTION && TRACE_IRQFLAGS_SUPPORT
+ help
+ If you say Y here then the kernel will use a debug variant of the
+ commonly used smp_processor_id() function and will print warnings
+ if kernel code uses it in a preemption-unsafe way. Also, the kernel
+ will detect preemption count underflows.
+
+ This option has potential to introduce high runtime overhead,
+ depending on workload as it triggers debugging routines for each
+ this_cpu operation. It should only be used for debugging purposes.
+
+menu "Lock Debugging (spinlocks, mutexes, etc...)"
+
+config LOCK_DEBUGGING_SUPPORT
+ bool
+ depends on TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
+ default y
+
+config PROVE_LOCKING
+ bool "Lock debugging: prove locking correctness"
+ depends on DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT
+ select LOCKDEP
+ select DEBUG_SPINLOCK
+ select DEBUG_MUTEXES if !PREEMPT_RT
+ select DEBUG_RT_MUTEXES if RT_MUTEXES
+ select DEBUG_RWSEMS
+ select DEBUG_WW_MUTEX_SLOWPATH
+ select DEBUG_LOCK_ALLOC
+ select PREEMPT_COUNT if !ARCH_NO_PREEMPT
+ select TRACE_IRQFLAGS
+ default n
+ help
+ This feature enables the kernel to prove that all locking
+ that occurs in the kernel runtime is mathematically
+ correct: that under no circumstance could an arbitrary (and
+ not yet triggered) combination of observed locking
+ sequences (on an arbitrary number of CPUs, running an
+ arbitrary number of tasks and interrupt contexts) cause a
+ deadlock.
+
+ In short, this feature enables the kernel to report locking
+ related deadlocks before they actually occur.
+
+ The proof does not depend on how hard and complex a
+ deadlock scenario would be to trigger: how many
+ participant CPUs, tasks and irq-contexts would be needed
+ for it to trigger. The proof also does not depend on
+ timing: if a race and a resulting deadlock is possible
+ theoretically (no matter how unlikely the race scenario
+ is), it will be proven so and will immediately be
+ reported by the kernel (once the event is observed that
+ makes the deadlock theoretically possible).
+
+ If a deadlock is impossible (i.e. the locking rules, as
+ observed by the kernel, are mathematically correct), the
+ kernel reports nothing.
+
+ NOTE: this feature can also be enabled for rwlocks, mutexes
+ and rwsems - in which case all dependencies between these
+ different locking variants are observed and mapped too, and
+ the proof of observed correctness is also maintained for an
+ arbitrary combination of these separate locking variants.
+
+ For more details, see Documentation/locking/lockdep-design.rst.
+
+config PROVE_RAW_LOCK_NESTING
+ bool "Enable raw_spinlock - spinlock nesting checks"
+ depends on PROVE_LOCKING
+ default n
+ help
+ Enable the raw_spinlock vs. spinlock nesting checks which ensure
+ that the lock nesting rules for PREEMPT_RT enabled kernels are
+ not violated.
+
+ NOTE: There are known nesting problems. So if you enable this
+ option expect lockdep splats until these problems have been fully
+ addressed which is work in progress. This config switch allows to
+ identify and analyze these problems. It will be removed and the
+ check permanently enabled once the main issues have been fixed.
+
+ If unsure, select N.
+
+config LOCK_STAT
+ bool "Lock usage statistics"
+ depends on DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT
+ select LOCKDEP
+ select DEBUG_SPINLOCK
+ select DEBUG_MUTEXES if !PREEMPT_RT
+ select DEBUG_RT_MUTEXES if RT_MUTEXES
+ select DEBUG_LOCK_ALLOC
+ default n
+ help
+ This feature enables tracking lock contention points
+
+ For more details, see Documentation/locking/lockstat.rst
+
+ This also enables lock events required by "perf lock",
+ subcommand of perf.
+ If you want to use "perf lock", you also need to turn on
+ CONFIG_EVENT_TRACING.
+
+ CONFIG_LOCK_STAT defines "contended" and "acquired" lock events.
+ (CONFIG_LOCKDEP defines "acquire" and "release" events.)
+
+config DEBUG_RT_MUTEXES
+ bool "RT Mutex debugging, deadlock detection"
+ depends on DEBUG_KERNEL && RT_MUTEXES
+ help
+ This allows rt mutex semantics violations and rt mutex related
+ deadlocks (lockups) to be detected and reported automatically.
+
+config DEBUG_SPINLOCK
+ bool "Spinlock and rw-lock debugging: basic checks"
+ depends on DEBUG_KERNEL
+ select UNINLINE_SPIN_UNLOCK
+ help
+ Say Y here and build SMP to catch missing spinlock initialization
+ and certain other kinds of spinlock errors commonly made. This is
+ best used in conjunction with the NMI watchdog so that spinlock
+ deadlocks are also debuggable.
+
+config DEBUG_MUTEXES
+ bool "Mutex debugging: basic checks"
+ depends on DEBUG_KERNEL && !PREEMPT_RT
+ help
+ This feature allows mutex semantics violations to be detected and
+ reported.
+
+config DEBUG_WW_MUTEX_SLOWPATH
+ bool "Wait/wound mutex debugging: Slowpath testing"
+ depends on DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT
+ select DEBUG_LOCK_ALLOC
+ select DEBUG_SPINLOCK
+ select DEBUG_MUTEXES if !PREEMPT_RT
+ select DEBUG_RT_MUTEXES if PREEMPT_RT
+ help
+ This feature enables slowpath testing for w/w mutex users by
+ injecting additional -EDEADLK wound/backoff cases. Together with
+ the full mutex checks enabled with (CONFIG_PROVE_LOCKING) this
+ will test all possible w/w mutex interface abuse with the
+ exception of simply not acquiring all the required locks.
+ Note that this feature can introduce significant overhead, so
+ it really should not be enabled in a production or distro kernel,
+ even a debug kernel. If you are a driver writer, enable it. If
+ you are a distro, do not.
+
+config DEBUG_RWSEMS
+ bool "RW Semaphore debugging: basic checks"
+ depends on DEBUG_KERNEL
+ help
+ This debugging feature allows mismatched rw semaphore locks
+ and unlocks to be detected and reported.
+
+config DEBUG_LOCK_ALLOC
+ bool "Lock debugging: detect incorrect freeing of live locks"
+ depends on DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT
+ select DEBUG_SPINLOCK
+ select DEBUG_MUTEXES if !PREEMPT_RT
+ select DEBUG_RT_MUTEXES if RT_MUTEXES
+ select LOCKDEP
+ help
+ This feature will check whether any held lock (spinlock, rwlock,
+ mutex or rwsem) is incorrectly freed by the kernel, via any of the
+ memory-freeing routines (kfree(), kmem_cache_free(), free_pages(),
+ vfree(), etc.), whether a live lock is incorrectly reinitialized via
+ spin_lock_init()/mutex_init()/etc., or whether there is any lock
+ held during task exit.
+
+config LOCKDEP
+ bool
+ depends on DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT
+ select STACKTRACE
+ select KALLSYMS
+ select KALLSYMS_ALL
+
+config LOCKDEP_SMALL
+ bool
+
+config LOCKDEP_BITS
+ int "Bitsize for MAX_LOCKDEP_ENTRIES"
+ depends on LOCKDEP && !LOCKDEP_SMALL
+ range 10 30
+ default 15
+ help
+ Try increasing this value if you hit "BUG: MAX_LOCKDEP_ENTRIES too low!" message.
+
+config LOCKDEP_CHAINS_BITS
+ int "Bitsize for MAX_LOCKDEP_CHAINS"
+ depends on LOCKDEP && !LOCKDEP_SMALL
+ range 10 30
+ default 16
+ help
+ Try increasing this value if you hit "BUG: MAX_LOCKDEP_CHAINS too low!" message.
+
+config LOCKDEP_STACK_TRACE_BITS
+ int "Bitsize for MAX_STACK_TRACE_ENTRIES"
+ depends on LOCKDEP && !LOCKDEP_SMALL
+ range 10 30
+ default 19
+ help
+ Try increasing this value if you hit "BUG: MAX_STACK_TRACE_ENTRIES too low!" message.
+
+config LOCKDEP_STACK_TRACE_HASH_BITS
+ int "Bitsize for STACK_TRACE_HASH_SIZE"
+ depends on LOCKDEP && !LOCKDEP_SMALL
+ range 10 30
+ default 14
+ help
+ Try increasing this value if you need large MAX_STACK_TRACE_ENTRIES.
+
+config LOCKDEP_CIRCULAR_QUEUE_BITS
+ int "Bitsize for elements in circular_queue struct"
+ depends on LOCKDEP
+ range 10 30
+ default 12
+ help
+ Try increasing this value if you hit "lockdep bfs error:-1" warning due to __cq_enqueue() failure.
+
+config DEBUG_LOCKDEP
+ bool "Lock dependency engine debugging"
+ depends on DEBUG_KERNEL && LOCKDEP
+ select DEBUG_IRQFLAGS
+ help
+ If you say Y here, the lock dependency engine will do
+ additional runtime checks to debug itself, at the price
+ of more runtime overhead.
+
+config DEBUG_ATOMIC_SLEEP
+ bool "Sleep inside atomic section checking"
+ select PREEMPT_COUNT
+ depends on DEBUG_KERNEL
+ depends on !ARCH_NO_PREEMPT
+ help
+ If you say Y here, various routines which may sleep will become very
+ noisy if they are called inside atomic sections: when a spinlock is
+ held, inside an rcu read side critical section, inside preempt disabled
+ sections, inside an interrupt, etc...
+
+config DEBUG_LOCKING_API_SELFTESTS
+ bool "Locking API boot-time self-tests"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here if you want the kernel to run a short self-test during
+ bootup. The self-test checks whether common types of locking bugs
+ are detected by debugging mechanisms or not. (if you disable
+ lock debugging then those bugs won't be detected of course.)
+ The following locking APIs are covered: spinlocks, rwlocks,
+ mutexes and rwsems.
+
+config LOCK_TORTURE_TEST
+ tristate "torture tests for locking"
+ depends on DEBUG_KERNEL
+ select TORTURE_TEST
+ help
+ This option provides a kernel module that runs torture tests
+ on kernel locking primitives. The kernel module may be built
+ after the fact on the running kernel to be tested, if desired.
+
+ Say Y here if you want kernel locking-primitive torture tests
+ to be built into the kernel.
+ Say M if you want these torture tests to build as a module.
+ Say N if you are unsure.
+
+config WW_MUTEX_SELFTEST
+ tristate "Wait/wound mutex selftests"
+ help
+ This option provides a kernel module that runs tests on the
+ on the struct ww_mutex locking API.
+
+ It is recommended to enable DEBUG_WW_MUTEX_SLOWPATH in conjunction
+ with this test harness.
+
+ Say M if you want these self tests to build as a module.
+ Say N if you are unsure.
+
+config SCF_TORTURE_TEST
+ tristate "torture tests for smp_call_function*()"
+ depends on DEBUG_KERNEL
+ select TORTURE_TEST
+ help
+ This option provides a kernel module that runs torture tests
+ on the smp_call_function() family of primitives. The kernel
+ module may be built after the fact on the running kernel to
+ be tested, if desired.
+
+config CSD_LOCK_WAIT_DEBUG
+ bool "Debugging for csd_lock_wait(), called from smp_call_function*()"
+ depends on DEBUG_KERNEL
+ depends on 64BIT
+ default n
+ help
+ This option enables debug prints when CPUs are slow to respond
+ to the smp_call_function*() IPI wrappers. These debug prints
+ include the IPI handler function currently executing (if any)
+ and relevant stack traces.
+
+endmenu # lock debugging
+
+config TRACE_IRQFLAGS
+ depends on TRACE_IRQFLAGS_SUPPORT
+ bool
+ help
+ Enables hooks to interrupt enabling and disabling for
+ either tracing or lock debugging.
+
+config TRACE_IRQFLAGS_NMI
+ def_bool y
+ depends on TRACE_IRQFLAGS
+ depends on TRACE_IRQFLAGS_NMI_SUPPORT
+
+config DEBUG_IRQFLAGS
+ bool "Debug IRQ flag manipulation"
+ help
+ Enables checks for potentially unsafe enabling or disabling of
+ interrupts, such as calling raw_local_irq_restore() when interrupts
+ are enabled.
+
+config STACKTRACE
+ bool "Stack backtrace support"
+ depends on STACKTRACE_SUPPORT
+ help
+ This option causes the kernel to create a /proc/pid/stack for
+ every process, showing its current stack trace.
+ It is also used by various kernel debugging features that require
+ stack trace generation.
+
+config WARN_ALL_UNSEEDED_RANDOM
+ bool "Warn for all uses of unseeded randomness"
+ default n
+ help
+ Some parts of the kernel contain bugs relating to their use of
+ cryptographically secure random numbers before it's actually possible
+ to generate those numbers securely. This setting ensures that these
+ flaws don't go unnoticed, by enabling a message, should this ever
+ occur. This will allow people with obscure setups to know when things
+ are going wrong, so that they might contact developers about fixing
+ it.
+
+ Unfortunately, on some models of some architectures getting
+ a fully seeded CRNG is extremely difficult, and so this can
+ result in dmesg getting spammed for a surprisingly long
+ time. This is really bad from a security perspective, and
+ so architecture maintainers really need to do what they can
+ to get the CRNG seeded sooner after the system is booted.
+ However, since users cannot do anything actionable to
+ address this, by default this option is disabled.
+
+ Say Y here if you want to receive warnings for all uses of
+ unseeded randomness. This will be of use primarily for
+ those developers interested in improving the security of
+ Linux kernels running on their architecture (or
+ subarchitecture).
+
+config DEBUG_KOBJECT
+ bool "kobject debugging"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here, some extra kobject debugging messages will be sent
+ to the syslog.
+
+config DEBUG_KOBJECT_RELEASE
+ bool "kobject release debugging"
+ depends on DEBUG_OBJECTS_TIMERS
+ help
+ kobjects are reference counted objects. This means that their
+ last reference count put is not predictable, and the kobject can
+ live on past the point at which a driver decides to drop its
+ initial reference to the kobject gained on allocation. An
+ example of this would be a struct device which has just been
+ unregistered.
+
+ However, some buggy drivers assume that after such an operation,
+ the memory backing the kobject can be immediately freed. This
+ goes completely against the principles of a refcounted object.
+
+ If you say Y here, the kernel will delay the release of kobjects
+ on the last reference count to improve the visibility of this
+ kind of kobject release bug.
+
+config HAVE_DEBUG_BUGVERBOSE
+ bool
+
+menu "Debug kernel data structures"
+
+config DEBUG_LIST
+ bool "Debug linked list manipulation"
+ depends on DEBUG_KERNEL || BUG_ON_DATA_CORRUPTION
+ help
+ Enable this to turn on extended checks in the linked-list
+ walking routines.
+
+ If unsure, say N.
+
+config DEBUG_PLIST
+ bool "Debug priority linked list manipulation"
+ depends on DEBUG_KERNEL
+ help
+ Enable this to turn on extended checks in the priority-ordered
+ linked-list (plist) walking routines. This checks the entire
+ list multiple times during each manipulation.
+
+ If unsure, say N.
+
+config DEBUG_SG
+ bool "Debug SG table operations"
+ depends on DEBUG_KERNEL
+ help
+ Enable this to turn on checks on scatter-gather tables. This can
+ help find problems with drivers that do not properly initialize
+ their sg tables.
+
+ If unsure, say N.
+
+config DEBUG_NOTIFIERS
+ bool "Debug notifier call chains"
+ depends on DEBUG_KERNEL
+ help
+ Enable this to turn on sanity checking for notifier call chains.
+ This is most useful for kernel developers to make sure that
+ modules properly unregister themselves from notifier chains.
+ This is a relatively cheap check but if you care about maximum
+ performance, say N.
+
+config BUG_ON_DATA_CORRUPTION
+ bool "Trigger a BUG when data corruption is detected"
+ select DEBUG_LIST
+ help
+ Select this option if the kernel should BUG when it encounters
+ data corruption in kernel memory structures when they get checked
+ for validity.
+
+ If unsure, say N.
+
+config DEBUG_MAPLE_TREE
+ bool "Debug maple trees"
+ depends on DEBUG_KERNEL
+ help
+ Enable maple tree debugging information and extra validations.
+
+ If unsure, say N.
+
+endmenu
+
+config DEBUG_CREDENTIALS
+ bool "Debug credential management"
+ depends on DEBUG_KERNEL
+ help
+ Enable this to turn on some debug checking for credential
+ management. The additional code keeps track of the number of
+ pointers from task_structs to any given cred struct, and checks to
+ see that this number never exceeds the usage count of the cred
+ struct.
+
+ Furthermore, if SELinux is enabled, this also checks that the
+ security pointer in the cred struct is never seen to be invalid.
+
+ If unsure, say N.
+
+source "kernel/rcu/Kconfig.debug"
+
+config DEBUG_WQ_FORCE_RR_CPU
+ bool "Force round-robin CPU selection for unbound work items"
+ depends on DEBUG_KERNEL
+ default n
+ help
+ Workqueue used to implicitly guarantee that work items queued
+ without explicit CPU specified are put on the local CPU. This
+ guarantee is no longer true and while local CPU is still
+ preferred work items may be put on foreign CPUs. Kernel
+ parameter "workqueue.debug_force_rr_cpu" is added to force
+ round-robin CPU selection to flush out usages which depend on the
+ now broken guarantee. This config option enables the debug
+ feature by default. When enabled, memory and cache locality will
+ be impacted.
+
+config CPU_HOTPLUG_STATE_CONTROL
+ bool "Enable CPU hotplug state control"
+ depends on DEBUG_KERNEL
+ depends on HOTPLUG_CPU
+ default n
+ help
+ Allows to write steps between "offline" and "online" to the CPUs
+ sysfs target file so states can be stepped granular. This is a debug
+ option for now as the hotplug machinery cannot be stopped and
+ restarted at arbitrary points yet.
+
+ Say N if your are unsure.
+
+config LATENCYTOP
+ bool "Latency measuring infrastructure"
+ depends on DEBUG_KERNEL
+ depends on STACKTRACE_SUPPORT
+ depends on PROC_FS
+ depends on FRAME_POINTER || MIPS || PPC || S390 || MICROBLAZE || ARM || ARC || X86
+ select KALLSYMS
+ select KALLSYMS_ALL
+ select STACKTRACE
+ select SCHEDSTATS
+ help
+ Enable this option if you want to use the LatencyTOP tool
+ to find out which userspace is blocking on what kernel operations.
+
+source "kernel/trace/Kconfig"
+
+config PROVIDE_OHCI1394_DMA_INIT
+ bool "Remote debugging over FireWire early on boot"
+ depends on PCI && X86
+ help
+ If you want to debug problems which hang or crash the kernel early
+ on boot and the crashing machine has a FireWire port, you can use
+ this feature to remotely access the memory of the crashed machine
+ over FireWire. This employs remote DMA as part of the OHCI1394
+ specification which is now the standard for FireWire controllers.
+
+ With remote DMA, you can monitor the printk buffer remotely using
+ firescope and access all memory below 4GB using fireproxy from gdb.
+ Even controlling a kernel debugger is possible using remote DMA.
+
+ Usage:
+
+ If ohci1394_dma=early is used as boot parameter, it will initialize
+ all OHCI1394 controllers which are found in the PCI config space.
+
+ As all changes to the FireWire bus such as enabling and disabling
+ devices cause a bus reset and thereby disable remote DMA for all
+ devices, be sure to have the cable plugged and FireWire enabled on
+ the debugging host before booting the debug target for debugging.
+
+ This code (~1k) is freed after boot. By then, the firewire stack
+ in charge of the OHCI-1394 controllers should be used instead.
+
+ See Documentation/core-api/debugging-via-ohci1394.rst for more information.
+
+source "samples/Kconfig"
+
+config ARCH_HAS_DEVMEM_IS_ALLOWED
+ bool
+
+config STRICT_DEVMEM
+ bool "Filter access to /dev/mem"
+ depends on MMU && DEVMEM
+ depends on ARCH_HAS_DEVMEM_IS_ALLOWED || GENERIC_LIB_DEVMEM_IS_ALLOWED
+ default y if PPC || X86 || ARM64
+ help
+ If this option is disabled, you allow userspace (root) access to all
+ of memory, including kernel and userspace memory. Accidental
+ access to this is obviously disastrous, but specific access can
+ be used by people debugging the kernel. Note that with PAT support
+ enabled, even in this case there are restrictions on /dev/mem
+ use due to the cache aliasing requirements.
+
+ If this option is switched on, and IO_STRICT_DEVMEM=n, the /dev/mem
+ file only allows userspace access to PCI space and the BIOS code and
+ data regions. This is sufficient for dosemu and X and all common
+ users of /dev/mem.
+
+ If in doubt, say Y.
+
+config IO_STRICT_DEVMEM
+ bool "Filter I/O access to /dev/mem"
+ depends on STRICT_DEVMEM
+ help
+ If this option is disabled, you allow userspace (root) access to all
+ io-memory regardless of whether a driver is actively using that
+ range. Accidental access to this is obviously disastrous, but
+ specific access can be used by people debugging kernel drivers.
+
+ If this option is switched on, the /dev/mem file only allows
+ userspace access to *idle* io-memory ranges (see /proc/iomem) This
+ may break traditional users of /dev/mem (dosemu, legacy X, etc...)
+ if the driver using a given range cannot be disabled.
+
+ If in doubt, say Y.
+
+menu "$(SRCARCH) Debugging"
+
+source "arch/$(SRCARCH)/Kconfig.debug"
+
+endmenu
+
+menu "Kernel Testing and Coverage"
+
+source "lib/kunit/Kconfig"
+
+config NOTIFIER_ERROR_INJECTION
+ tristate "Notifier error injection"
+ depends on DEBUG_KERNEL
+ select DEBUG_FS
+ help
+ This option provides the ability to inject artificial errors to
+ specified notifier chain callbacks. It is useful to test the error
+ handling of notifier call chain failures.
+
+ Say N if unsure.
+
+config PM_NOTIFIER_ERROR_INJECT
+ tristate "PM notifier error injection module"
+ depends on PM && NOTIFIER_ERROR_INJECTION
+ default m if PM_DEBUG
+ help
+ This option provides the ability to inject artificial errors to
+ PM notifier chain callbacks. It is controlled through debugfs
+ interface /sys/kernel/debug/notifier-error-inject/pm
+
+ If the notifier call chain should be failed with some events
+ notified, write the error code to "actions/<notifier event>/error".
+
+ Example: Inject PM suspend error (-12 = -ENOMEM)
+
+ # cd /sys/kernel/debug/notifier-error-inject/pm/
+ # echo -12 > actions/PM_SUSPEND_PREPARE/error
+ # echo mem > /sys/power/state
+ bash: echo: write error: Cannot allocate memory
+
+ To compile this code as a module, choose M here: the module will
+ be called pm-notifier-error-inject.
+
+ If unsure, say N.
+
+config OF_RECONFIG_NOTIFIER_ERROR_INJECT
+ tristate "OF reconfig notifier error injection module"
+ depends on OF_DYNAMIC && NOTIFIER_ERROR_INJECTION
+ help
+ This option provides the ability to inject artificial errors to
+ OF reconfig notifier chain callbacks. It is controlled
+ through debugfs interface under
+ /sys/kernel/debug/notifier-error-inject/OF-reconfig/
+
+ If the notifier call chain should be failed with some events
+ notified, write the error code to "actions/<notifier event>/error".
+
+ To compile this code as a module, choose M here: the module will
+ be called of-reconfig-notifier-error-inject.
+
+ If unsure, say N.
+
+config NETDEV_NOTIFIER_ERROR_INJECT
+ tristate "Netdev notifier error injection module"
+ depends on NET && NOTIFIER_ERROR_INJECTION
+ help
+ This option provides the ability to inject artificial errors to
+ netdevice notifier chain callbacks. It is controlled through debugfs
+ interface /sys/kernel/debug/notifier-error-inject/netdev
+
+ If the notifier call chain should be failed with some events
+ notified, write the error code to "actions/<notifier event>/error".
+
+ Example: Inject netdevice mtu change error (-22 = -EINVAL)
+
+ # cd /sys/kernel/debug/notifier-error-inject/netdev
+ # echo -22 > actions/NETDEV_CHANGEMTU/error
+ # ip link set eth0 mtu 1024
+ RTNETLINK answers: Invalid argument
+
+ To compile this code as a module, choose M here: the module will
+ be called netdev-notifier-error-inject.
+
+ If unsure, say N.
+
+config FUNCTION_ERROR_INJECTION
+ bool "Fault-injections of functions"
+ depends on HAVE_FUNCTION_ERROR_INJECTION && KPROBES
+ help
+ Add fault injections into various functions that are annotated with
+ ALLOW_ERROR_INJECTION() in the kernel. BPF may also modify the return
+ value of theses functions. This is useful to test error paths of code.
+
+ If unsure, say N
+
+config FAULT_INJECTION
+ bool "Fault-injection framework"
+ depends on DEBUG_KERNEL
+ help
+ Provide fault-injection framework.
+ For more details, see Documentation/fault-injection/.
+
+config FAILSLAB
+ bool "Fault-injection capability for kmalloc"
+ depends on FAULT_INJECTION
+ depends on SLAB || SLUB
+ help
+ Provide fault-injection capability for kmalloc.
+
+config FAIL_PAGE_ALLOC
+ bool "Fault-injection capability for alloc_pages()"
+ depends on FAULT_INJECTION
+ help
+ Provide fault-injection capability for alloc_pages().
+
+config FAULT_INJECTION_USERCOPY
+ bool "Fault injection capability for usercopy functions"
+ depends on FAULT_INJECTION
+ help
+ Provides fault-injection capability to inject failures
+ in usercopy functions (copy_from_user(), get_user(), ...).
+
+config FAIL_MAKE_REQUEST
+ bool "Fault-injection capability for disk IO"
+ depends on FAULT_INJECTION && BLOCK
+ help
+ Provide fault-injection capability for disk IO.
+
+config FAIL_IO_TIMEOUT
+ bool "Fault-injection capability for faking disk interrupts"
+ depends on FAULT_INJECTION && BLOCK
+ help
+ Provide fault-injection capability on end IO handling. This
+ will make the block layer "forget" an interrupt as configured,
+ thus exercising the error handling.
+
+ Only works with drivers that use the generic timeout handling,
+ for others it won't do anything.
+
+config FAIL_FUTEX
+ bool "Fault-injection capability for futexes"
+ select DEBUG_FS
+ depends on FAULT_INJECTION && FUTEX
+ help
+ Provide fault-injection capability for futexes.
+
+config FAULT_INJECTION_DEBUG_FS
+ bool "Debugfs entries for fault-injection capabilities"
+ depends on FAULT_INJECTION && SYSFS && DEBUG_FS
+ help
+ Enable configuration of fault-injection capabilities via debugfs.
+
+config FAIL_FUNCTION
+ bool "Fault-injection capability for functions"
+ depends on FAULT_INJECTION_DEBUG_FS && FUNCTION_ERROR_INJECTION
+ help
+ Provide function-based fault-injection capability.
+ This will allow you to override a specific function with a return
+ with given return value. As a result, function caller will see
+ an error value and have to handle it. This is useful to test the
+ error handling in various subsystems.
+
+config FAIL_MMC_REQUEST
+ bool "Fault-injection capability for MMC IO"
+ depends on FAULT_INJECTION_DEBUG_FS && MMC
+ help
+ Provide fault-injection capability for MMC IO.
+ This will make the mmc core return data errors. This is
+ useful to test the error handling in the mmc block device
+ and to test how the mmc host driver handles retries from
+ the block device.
+
+config FAIL_SUNRPC
+ bool "Fault-injection capability for SunRPC"
+ depends on FAULT_INJECTION_DEBUG_FS && SUNRPC_DEBUG
+ help
+ Provide fault-injection capability for SunRPC and
+ its consumers.
+
+config FAULT_INJECTION_STACKTRACE_FILTER
+ bool "stacktrace filter for fault-injection capabilities"
+ depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
+ depends on !X86_64
+ select STACKTRACE
+ depends on FRAME_POINTER || MIPS || PPC || S390 || MICROBLAZE || ARM || ARC || X86
+ help
+ Provide stacktrace filter for fault-injection capabilities
+
+config ARCH_HAS_KCOV
+ bool
+ help
+ An architecture should select this when it can successfully
+ build and run with CONFIG_KCOV. This typically requires
+ disabling instrumentation for some early boot code.
+
+config CC_HAS_SANCOV_TRACE_PC
+ def_bool $(cc-option,-fsanitize-coverage=trace-pc)
+
+
+config KCOV
+ bool "Code coverage for fuzzing"
+ depends on ARCH_HAS_KCOV
+ depends on CC_HAS_SANCOV_TRACE_PC || GCC_PLUGINS
+ depends on !ARCH_WANTS_NO_INSTR || HAVE_NOINSTR_HACK || \
+ GCC_VERSION >= 120000 || CLANG_VERSION >= 130000
+ select DEBUG_FS
+ select GCC_PLUGIN_SANCOV if !CC_HAS_SANCOV_TRACE_PC
+ select OBJTOOL if HAVE_NOINSTR_HACK
+ help
+ KCOV exposes kernel code coverage information in a form suitable
+ for coverage-guided fuzzing (randomized testing).
+
+ If RANDOMIZE_BASE is enabled, PC values will not be stable across
+ different machines and across reboots. If you need stable PC values,
+ disable RANDOMIZE_BASE.
+
+ For more details, see Documentation/dev-tools/kcov.rst.
+
+config KCOV_ENABLE_COMPARISONS
+ bool "Enable comparison operands collection by KCOV"
+ depends on KCOV
+ depends on $(cc-option,-fsanitize-coverage=trace-cmp)
+ help
+ KCOV also exposes operands of every comparison in the instrumented
+ code along with operand sizes and PCs of the comparison instructions.
+ These operands can be used by fuzzing engines to improve the quality
+ of fuzzing coverage.
+
+config KCOV_INSTRUMENT_ALL
+ bool "Instrument all code by default"
+ depends on KCOV
+ default y
+ help
+ If you are doing generic system call fuzzing (like e.g. syzkaller),
+ then you will want to instrument the whole kernel and you should
+ say y here. If you are doing more targeted fuzzing (like e.g.
+ filesystem fuzzing with AFL) then you will want to enable coverage
+ for more specific subsets of files, and should say n here.
+
+config KCOV_IRQ_AREA_SIZE
+ hex "Size of interrupt coverage collection area in words"
+ depends on KCOV
+ default 0x40000
+ help
+ KCOV uses preallocated per-cpu areas to collect coverage from
+ soft interrupts. This specifies the size of those areas in the
+ number of unsigned long words.
+
+menuconfig RUNTIME_TESTING_MENU
+ bool "Runtime Testing"
+ def_bool y
+
+if RUNTIME_TESTING_MENU
+
+config LKDTM
+ tristate "Linux Kernel Dump Test Tool Module"
+ depends on DEBUG_FS
+ help
+ This module enables testing of the different dumping mechanisms by
+ inducing system failures at predefined crash points.
+ If you don't need it: say N
+ Choose M here to compile this code as a module. The module will be
+ called lkdtm.
+
+ Documentation on how to use the module can be found in
+ Documentation/fault-injection/provoke-crashes.rst
+
+config CPUMASK_KUNIT_TEST
+ tristate "KUnit test for cpumask" if !KUNIT_ALL_TESTS
+ depends on KUNIT
+ default KUNIT_ALL_TESTS
+ help
+ Enable to turn on cpumask tests, running at boot or module load time.
+
+ For more information on KUnit and unit tests in general, please refer
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+ If unsure, say N.
+
+config TEST_LIST_SORT
+ tristate "Linked list sorting test" if !KUNIT_ALL_TESTS
+ depends on KUNIT
+ default KUNIT_ALL_TESTS
+ help
+ Enable this to turn on 'list_sort()' function test. This test is
+ executed only once during system boot (so affects only boot time),
+ or at module load time.
+
+ If unsure, say N.
+
+config TEST_MIN_HEAP
+ tristate "Min heap test"
+ depends on DEBUG_KERNEL || m
+ help
+ Enable this to turn on min heap function tests. This test is
+ executed only once during system boot (so affects only boot time),
+ or at module load time.
+
+ If unsure, say N.
+
+config TEST_SORT
+ tristate "Array-based sort test" if !KUNIT_ALL_TESTS
+ depends on KUNIT
+ select STACKTRACE if ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
+ default KUNIT_ALL_TESTS
+ help
+ This option enables the self-test function of 'sort()' at boot,
+ or at module load time.
+
+ If unsure, say N.
+
+config TEST_DIV64
+ tristate "64bit/32bit division and modulo test"
+ depends on DEBUG_KERNEL || m
+ help
+ Enable this to turn on 'do_div()' function test. This test is
+ executed only once during system boot (so affects only boot time),
+ or at module load time.
+
+ If unsure, say N.
+
+config KPROBES_SANITY_TEST
+ tristate "Kprobes sanity tests" if !KUNIT_ALL_TESTS
+ depends on DEBUG_KERNEL
+ depends on KPROBES
+ depends on KUNIT
+ select STACKTRACE if ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
+ default KUNIT_ALL_TESTS
+ help
+ This option provides for testing basic kprobes functionality on
+ boot. Samples of kprobe and kretprobe are inserted and
+ verified for functionality.
+
+ Say N if you are unsure.
+
+config FPROBE_SANITY_TEST
+ bool "Self test for fprobe"
+ depends on DEBUG_KERNEL
+ depends on FPROBE
+ depends on KUNIT=y
+ help
+ This option will enable testing the fprobe when the system boot.
+ A series of tests are made to verify that the fprobe is functioning
+ properly.
+
+ Say N if you are unsure.
+
+config BACKTRACE_SELF_TEST
+ tristate "Self test for the backtrace code"
+ depends on DEBUG_KERNEL
+ help
+ This option provides a kernel module that can be used to test
+ the kernel stack backtrace code. This option is not useful
+ for distributions or general kernels, but only for kernel
+ developers working on architecture code.
+
+ Note that if you want to also test saved backtraces, you will
+ have to enable STACKTRACE as well.
+
+ Say N if you are unsure.
+
+config TEST_REF_TRACKER
+ tristate "Self test for reference tracker"
+ depends on DEBUG_KERNEL && STACKTRACE_SUPPORT
+ select REF_TRACKER
+ help
+ This option provides a kernel module performing tests
+ using reference tracker infrastructure.
+
+ Say N if you are unsure.
+
+config RBTREE_TEST
+ tristate "Red-Black tree test"
+ depends on DEBUG_KERNEL
+ help
+ A benchmark measuring the performance of the rbtree library.
+ Also includes rbtree invariant checks.
+
+config REED_SOLOMON_TEST
+ tristate "Reed-Solomon library test"
+ depends on DEBUG_KERNEL || m
+ select REED_SOLOMON
+ select REED_SOLOMON_ENC16
+ select REED_SOLOMON_DEC16
+ help
+ This option enables the self-test function of rslib at boot,
+ or at module load time.
+
+ If unsure, say N.
+
+config INTERVAL_TREE_TEST
+ tristate "Interval tree test"
+ depends on DEBUG_KERNEL
+ select INTERVAL_TREE
+ help
+ A benchmark measuring the performance of the interval tree library
+
+config PERCPU_TEST
+ tristate "Per cpu operations test"
+ depends on m && DEBUG_KERNEL
+ help
+ Enable this option to build test module which validates per-cpu
+ operations.
+
+ If unsure, say N.
+
+config ATOMIC64_SELFTEST
+ tristate "Perform an atomic64_t self-test"
+ help
+ Enable this option to test the atomic64_t functions at boot or
+ at module load time.
+
+ If unsure, say N.
+
+config ASYNC_RAID6_TEST
+ tristate "Self test for hardware accelerated raid6 recovery"
+ depends on ASYNC_RAID6_RECOV
+ select ASYNC_MEMCPY
+ help
+ This is a one-shot self test that permutes through the
+ recovery of all the possible two disk failure scenarios for a
+ N-disk array. Recovery is performed with the asynchronous
+ raid6 recovery routines, and will optionally use an offload
+ engine if one is available.
+
+ If unsure, say N.
+
+config TEST_HEXDUMP
+ tristate "Test functions located in the hexdump module at runtime"
+
+config STRING_SELFTEST
+ tristate "Test string functions at runtime"
+
+config TEST_STRING_HELPERS
+ tristate "Test functions located in the string_helpers module at runtime"
+
+config TEST_STRSCPY
+ tristate "Test strscpy*() family of functions at runtime"
+
+config TEST_KSTRTOX
+ tristate "Test kstrto*() family of functions at runtime"
+
+config TEST_PRINTF
+ tristate "Test printf() family of functions at runtime"
+
+config TEST_SCANF
+ tristate "Test scanf() family of functions at runtime"
+
+config TEST_BITMAP
+ tristate "Test bitmap_*() family of functions at runtime"
+ help
+ Enable this option to test the bitmap functions at boot.
+
+ If unsure, say N.
+
+config TEST_UUID
+ tristate "Test functions located in the uuid module at runtime"
+
+config TEST_XARRAY
+ tristate "Test the XArray code at runtime"
+
+config TEST_MAPLE_TREE
+ select DEBUG_MAPLE_TREE
+ tristate "Test the Maple Tree code at runtime"
+
+config TEST_RHASHTABLE
+ tristate "Perform selftest on resizable hash table"
+ help
+ Enable this option to test the rhashtable functions at boot.
+
+ If unsure, say N.
+
+config TEST_SIPHASH
+ tristate "Perform selftest on siphash functions"
+ help
+ Enable this option to test the kernel's siphash (<linux/siphash.h>) hash
+ functions on boot (or module load).
+
+ This is intended to help people writing architecture-specific
+ optimized versions. If unsure, say N.
+
+config TEST_IDA
+ tristate "Perform selftest on IDA functions"
+
+config TEST_PARMAN
+ tristate "Perform selftest on priority array manager"
+ depends on PARMAN
+ help
+ Enable this option to test priority array manager on boot
+ (or module load).
+
+ If unsure, say N.
+
+config TEST_IRQ_TIMINGS
+ bool "IRQ timings selftest"
+ depends on IRQ_TIMINGS
+ help
+ Enable this option to test the irq timings code on boot.
+
+ If unsure, say N.
+
+config TEST_LKM
+ tristate "Test module loading with 'hello world' module"
+ depends on m
+ help
+ This builds the "test_module" module that emits "Hello, world"
+ on printk when loaded. It is designed to be used for basic
+ evaluation of the module loading subsystem (for example when
+ validating module verification). It lacks any extra dependencies,
+ and will not normally be loaded by the system unless explicitly
+ requested by name.
+
+ If unsure, say N.
+
+config TEST_BITOPS
+ tristate "Test module for compilation of bitops operations"
+ depends on m
+ help
+ This builds the "test_bitops" module that is much like the
+ TEST_LKM module except that it does a basic exercise of the
+ set/clear_bit macros and get_count_order/long to make sure there are
+ no compiler warnings from C=1 sparse checker or -Wextra
+ compilations. It has no dependencies and doesn't run or load unless
+ explicitly requested by name. for example: modprobe test_bitops.
+
+ If unsure, say N.
+
+config TEST_VMALLOC
+ tristate "Test module for stress/performance analysis of vmalloc allocator"
+ default n
+ depends on MMU
+ depends on m
+ help
+ This builds the "test_vmalloc" module that should be used for
+ stress and performance analysis. So, any new change for vmalloc
+ subsystem can be evaluated from performance and stability point
+ of view.
+
+ If unsure, say N.
+
+config TEST_USER_COPY
+ tristate "Test user/kernel boundary protections"
+ depends on m
+ help
+ This builds the "test_user_copy" module that runs sanity checks
+ on the copy_to/from_user infrastructure, making sure basic
+ user/kernel boundary testing is working. If it fails to load,
+ a regression has been detected in the user/kernel memory boundary
+ protections.
+
+ If unsure, say N.
+
+config TEST_BPF
+ tristate "Test BPF filter functionality"
+ depends on m && NET
+ help
+ This builds the "test_bpf" module that runs various test vectors
+ against the BPF interpreter or BPF JIT compiler depending on the
+ current setting. This is in particular useful for BPF JIT compiler
+ development, but also to run regression tests against changes in
+ the interpreter code. It also enables test stubs for eBPF maps and
+ verifier used by user space verifier testsuite.
+
+ If unsure, say N.
+
+config TEST_BLACKHOLE_DEV
+ tristate "Test blackhole netdev functionality"
+ depends on m && NET
+ help
+ This builds the "test_blackhole_dev" module that validates the
+ data path through this blackhole netdev.
+
+ If unsure, say N.
+
+config FIND_BIT_BENCHMARK
+ tristate "Test find_bit functions"
+ help
+ This builds the "test_find_bit" module that measure find_*_bit()
+ functions performance.
+
+ If unsure, say N.
+
+config TEST_FIRMWARE
+ tristate "Test firmware loading via userspace interface"
+ depends on FW_LOADER
+ help
+ This builds the "test_firmware" module that creates a userspace
+ interface for testing firmware loading. This can be used to
+ control the triggering of firmware loading without needing an
+ actual firmware-using device. The contents can be rechecked by
+ userspace.
+
+ If unsure, say N.
+
+config TEST_SYSCTL
+ tristate "sysctl test driver"
+ depends on PROC_SYSCTL
+ help
+ This builds the "test_sysctl" module. This driver enables to test the
+ proc sysctl interfaces available to drivers safely without affecting
+ production knobs which might alter system functionality.
+
+ If unsure, say N.
+
+config BITFIELD_KUNIT
+ tristate "KUnit test bitfield functions at runtime" if !KUNIT_ALL_TESTS
+ depends on KUNIT
+ default KUNIT_ALL_TESTS
+ help
+ Enable this option to test the bitfield functions at boot.
+
+ KUnit tests run during boot and output the results to the debug log
+ in TAP format (http://testanything.org/). Only useful for kernel devs
+ running the KUnit test harness, and not intended for inclusion into a
+ production build.
+
+ For more information on KUnit and unit tests in general please refer
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+ If unsure, say N.
+
+config HASH_KUNIT_TEST
+ tristate "KUnit Test for integer hash functions" if !KUNIT_ALL_TESTS
+ depends on KUNIT
+ default KUNIT_ALL_TESTS
+ help
+ Enable this option to test the kernel's string (<linux/stringhash.h>), and
+ integer (<linux/hash.h>) hash functions on boot.
+
+ KUnit tests run during boot and output the results to the debug log
+ in TAP format (https://testanything.org/). Only useful for kernel devs
+ running the KUnit test harness, and not intended for inclusion into a
+ production build.
+
+ For more information on KUnit and unit tests in general please refer
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+ This is intended to help people writing architecture-specific
+ optimized versions. If unsure, say N.
+
+config RESOURCE_KUNIT_TEST
+ tristate "KUnit test for resource API" if !KUNIT_ALL_TESTS
+ depends on KUNIT
+ default KUNIT_ALL_TESTS
+ help
+ This builds the resource API unit test.
+ Tests the logic of API provided by resource.c and ioport.h.
+ For more information on KUnit and unit tests in general please refer
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+ If unsure, say N.
+
+config SYSCTL_KUNIT_TEST
+ tristate "KUnit test for sysctl" if !KUNIT_ALL_TESTS
+ depends on KUNIT
+ default KUNIT_ALL_TESTS
+ help
+ This builds the proc sysctl unit test, which runs on boot.
+ Tests the API contract and implementation correctness of sysctl.
+ For more information on KUnit and unit tests in general please refer
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+ If unsure, say N.
+
+config LIST_KUNIT_TEST
+ tristate "KUnit Test for Kernel Linked-list structures" if !KUNIT_ALL_TESTS
+ depends on KUNIT
+ default KUNIT_ALL_TESTS
+ help
+ This builds the linked list KUnit test suite.
+ It tests that the API and basic functionality of the list_head type
+ and associated macros.
+
+ KUnit tests run during boot and output the results to the debug log
+ in TAP format (https://testanything.org/). Only useful for kernel devs
+ running the KUnit test harness, and not intended for inclusion into a
+ production build.
+
+ For more information on KUnit and unit tests in general please refer
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+ If unsure, say N.
+
+config LINEAR_RANGES_TEST
+ tristate "KUnit test for linear_ranges"
+ depends on KUNIT
+ select LINEAR_RANGES
+ help
+ This builds the linear_ranges unit test, which runs on boot.
+ Tests the linear_ranges logic correctness.
+ For more information on KUnit and unit tests in general please refer
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+ If unsure, say N.
+
+config CMDLINE_KUNIT_TEST
+ tristate "KUnit test for cmdline API" if !KUNIT_ALL_TESTS
+ depends on KUNIT
+ default KUNIT_ALL_TESTS
+ help
+ This builds the cmdline API unit test.
+ Tests the logic of API provided by cmdline.c.
+ For more information on KUnit and unit tests in general please refer
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+ If unsure, say N.
+
+config BITS_TEST
+ tristate "KUnit test for bits.h" if !KUNIT_ALL_TESTS
+ depends on KUNIT
+ default KUNIT_ALL_TESTS
+ help
+ This builds the bits unit test.
+ Tests the logic of macros defined in bits.h.
+ For more information on KUnit and unit tests in general please refer
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+ If unsure, say N.
+
+config SLUB_KUNIT_TEST
+ tristate "KUnit test for SLUB cache error detection" if !KUNIT_ALL_TESTS
+ depends on SLUB_DEBUG && KUNIT
+ default KUNIT_ALL_TESTS
+ help
+ This builds SLUB allocator unit test.
+ Tests SLUB cache debugging functionality.
+ For more information on KUnit and unit tests in general please refer
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+ If unsure, say N.
+
+config RATIONAL_KUNIT_TEST
+ tristate "KUnit test for rational.c" if !KUNIT_ALL_TESTS
+ depends on KUNIT && RATIONAL
+ default KUNIT_ALL_TESTS
+ help
+ This builds the rational math unit test.
+ For more information on KUnit and unit tests in general please refer
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+ If unsure, say N.
+
+config MEMCPY_KUNIT_TEST
+ tristate "Test memcpy(), memmove(), and memset() functions at runtime" if !KUNIT_ALL_TESTS
+ depends on KUNIT
+ default KUNIT_ALL_TESTS
+ help
+ Builds unit tests for memcpy(), memmove(), and memset() functions.
+ For more information on KUnit and unit tests in general please refer
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+ If unsure, say N.
+
+config IS_SIGNED_TYPE_KUNIT_TEST
+ tristate "Test is_signed_type() macro" if !KUNIT_ALL_TESTS
+ depends on KUNIT
+ default KUNIT_ALL_TESTS
+ help
+ Builds unit tests for the is_signed_type() macro.
+
+ For more information on KUnit and unit tests in general please refer
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+ If unsure, say N.
+
+config OVERFLOW_KUNIT_TEST
+ tristate "Test check_*_overflow() functions at runtime" if !KUNIT_ALL_TESTS
+ depends on KUNIT
+ default KUNIT_ALL_TESTS
+ help
+ Builds unit tests for the check_*_overflow(), size_*(), allocation, and
+ related functions.
+
+ For more information on KUnit and unit tests in general please refer
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+ If unsure, say N.
+
+config STACKINIT_KUNIT_TEST
+ tristate "Test level of stack variable initialization" if !KUNIT_ALL_TESTS
+ depends on KUNIT
+ default KUNIT_ALL_TESTS
+ help
+ Test if the kernel is zero-initializing stack variables and
+ padding. Coverage is controlled by compiler flags,
+ CONFIG_INIT_STACK_ALL_PATTERN, CONFIG_INIT_STACK_ALL_ZERO,
+ CONFIG_GCC_PLUGIN_STRUCTLEAK, CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF,
+ or CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL.
+
+config FORTIFY_KUNIT_TEST
+ tristate "Test fortified str*() and mem*() function internals at runtime" if !KUNIT_ALL_TESTS
+ depends on KUNIT && FORTIFY_SOURCE
+ default KUNIT_ALL_TESTS
+ help
+ Builds unit tests for checking internals of FORTIFY_SOURCE as used
+ by the str*() and mem*() family of functions. For testing runtime
+ traps of FORTIFY_SOURCE, see LKDTM's "FORTIFY_*" tests.
+
+config HW_BREAKPOINT_KUNIT_TEST
+ bool "Test hw_breakpoint constraints accounting" if !KUNIT_ALL_TESTS
+ depends on HAVE_HW_BREAKPOINT
+ depends on KUNIT=y
+ default KUNIT_ALL_TESTS
+ help
+ Tests for hw_breakpoint constraints accounting.
+
+ If unsure, say N.
+
+config TEST_UDELAY
+ tristate "udelay test driver"
+ help
+ This builds the "udelay_test" module that helps to make sure
+ that udelay() is working properly.
+
+ If unsure, say N.
+
+config TEST_STATIC_KEYS
+ tristate "Test static keys"
+ depends on m
+ help
+ Test the static key interfaces.
+
+ If unsure, say N.
+
+config TEST_DYNAMIC_DEBUG
+ tristate "Test DYNAMIC_DEBUG"
+ depends on DYNAMIC_DEBUG
+ help
+ This module registers a tracer callback to count enabled
+ pr_debugs in a 'do_debugging' function, then alters their
+ enablements, calls the function, and compares counts.
+
+ If unsure, say N.
+
+config TEST_KMOD
+ tristate "kmod stress tester"
+ depends on m
+ depends on NETDEVICES && NET_CORE && INET # for TUN
+ depends on BLOCK
+ depends on PAGE_SIZE_LESS_THAN_256KB # for BTRFS
+ select TEST_LKM
+ select XFS_FS
+ select TUN
+ select BTRFS_FS
+ help
+ Test the kernel's module loading mechanism: kmod. kmod implements
+ support to load modules using the Linux kernel's usermode helper.
+ This test provides a series of tests against kmod.
+
+ Although technically you can either build test_kmod as a module or
+ into the kernel we disallow building it into the kernel since
+ it stress tests request_module() and this will very likely cause
+ some issues by taking over precious threads available from other
+ module load requests, ultimately this could be fatal.
+
+ To run tests run:
+
+ tools/testing/selftests/kmod/kmod.sh --help
+
+ If unsure, say N.
+
+config TEST_DEBUG_VIRTUAL
+ tristate "Test CONFIG_DEBUG_VIRTUAL feature"
+ depends on DEBUG_VIRTUAL
+ help
+ Test the kernel's ability to detect incorrect calls to
+ virt_to_phys() done against the non-linear part of the
+ kernel's virtual address map.
+
+ If unsure, say N.
+
+config TEST_MEMCAT_P
+ tristate "Test memcat_p() helper function"
+ help
+ Test the memcat_p() helper for correctly merging two
+ pointer arrays together.
+
+ If unsure, say N.
+
+config TEST_LIVEPATCH
+ tristate "Test livepatching"
+ default n
+ depends on DYNAMIC_DEBUG
+ depends on LIVEPATCH
+ depends on m
+ help
+ Test kernel livepatching features for correctness. The tests will
+ load test modules that will be livepatched in various scenarios.
+
+ To run all the livepatching tests:
+
+ make -C tools/testing/selftests TARGETS=livepatch run_tests
+
+ Alternatively, individual tests may be invoked:
+
+ tools/testing/selftests/livepatch/test-callbacks.sh
+ tools/testing/selftests/livepatch/test-livepatch.sh
+ tools/testing/selftests/livepatch/test-shadow-vars.sh
+
+ If unsure, say N.
+
+config TEST_OBJAGG
+ tristate "Perform selftest on object aggreration manager"
+ default n
+ depends on OBJAGG
+ help
+ Enable this option to test object aggregation manager on boot
+ (or module load).
+
+config TEST_MEMINIT
+ tristate "Test heap/page initialization"
+ help
+ Test if the kernel is zero-initializing heap and page allocations.
+ This can be useful to test init_on_alloc and init_on_free features.
+
+ If unsure, say N.
+
+config TEST_HMM
+ tristate "Test HMM (Heterogeneous Memory Management)"
+ depends on TRANSPARENT_HUGEPAGE
+ depends on DEVICE_PRIVATE
+ select HMM_MIRROR
+ select MMU_NOTIFIER
+ help
+ This is a pseudo device driver solely for testing HMM.
+ Say M here if you want to build the HMM test module.
+ Doing so will allow you to run tools/testing/selftest/vm/hmm-tests.
+
+ If unsure, say N.
+
+config TEST_FREE_PAGES
+ tristate "Test freeing pages"
+ help
+ Test that a memory leak does not occur due to a race between
+ freeing a block of pages and a speculative page reference.
+ Loading this module is safe if your kernel has the bug fixed.
+ If the bug is not fixed, it will leak gigabytes of memory and
+ probably OOM your system.
+
+config TEST_FPU
+ tristate "Test floating point operations in kernel space"
+ depends on X86 && !KCOV_INSTRUMENT_ALL
+ help
+ Enable this option to add /sys/kernel/debug/selftest_helpers/test_fpu
+ which will trigger a sequence of floating point operations. This is used
+ for self-testing floating point control register setting in
+ kernel_fpu_begin().
+
+ If unsure, say N.
+
+config TEST_CLOCKSOURCE_WATCHDOG
+ tristate "Test clocksource watchdog in kernel space"
+ depends on CLOCKSOURCE_WATCHDOG
+ help
+ Enable this option to create a kernel module that will trigger
+ a test of the clocksource watchdog. This module may be loaded
+ via modprobe or insmod in which case it will run upon being
+ loaded, or it may be built in, in which case it will run
+ shortly after boot.
+
+ If unsure, say N.
+
+endif # RUNTIME_TESTING_MENU
+
+config ARCH_USE_MEMTEST
+ bool
+ help
+ An architecture should select this when it uses early_memtest()
+ during boot process.
+
+config MEMTEST
+ bool "Memtest"
+ depends on ARCH_USE_MEMTEST
+ help
+ This option adds a kernel parameter 'memtest', which allows memtest
+ to be set and executed.
+ memtest=0, mean disabled; -- default
+ memtest=1, mean do 1 test pattern;
+ ...
+ memtest=17, mean do 17 test patterns.
+ If you are unsure how to answer this question, answer N.
+
+
+
+config HYPERV_TESTING
+ bool "Microsoft Hyper-V driver testing"
+ default n
+ depends on HYPERV && DEBUG_FS
+ help
+ Select this option to enable Hyper-V vmbus testing.
+
+endmenu # "Kernel Testing and Coverage"
+
+menu "Rust hacking"
+
+config RUST_DEBUG_ASSERTIONS
+ bool "Debug assertions"
+ depends on RUST
+ help
+ Enables rustc's `-Cdebug-assertions` codegen option.
+
+ This flag lets you turn `cfg(debug_assertions)` conditional
+ compilation on or off. This can be used to enable extra debugging
+ code in development but not in production. For example, it controls
+ the behavior of the standard library's `debug_assert!` macro.
+
+ Note that this will apply to all Rust code, including `core`.
+
+ If unsure, say N.
+
+config RUST_OVERFLOW_CHECKS
+ bool "Overflow checks"
+ default y
+ depends on RUST
+ help
+ Enables rustc's `-Coverflow-checks` codegen option.
+
+ This flag allows you to control the behavior of runtime integer
+ overflow. When overflow-checks are enabled, a Rust panic will occur
+ on overflow.
+
+ Note that this will apply to all Rust code, including `core`.
+
+ If unsure, say Y.
+
+endmenu # "Rust"
+
+source "Documentation/Kconfig"
+
+endmenu # Kernel hacking