1 files changed, 213 insertions, 0 deletions
diff --git a/net/mac80211/mesh_sync.c b/net/mac80211/mesh_sync.c
new file mode 100644
index 000000000..9e342cc25
--- /dev/null
+++ b/net/mac80211/mesh_sync.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2011-2012, Pavel Zubarev <pavel.zubarev@gmail.com>
+ * Copyright 2011-2012, Marco Porsch <marco.porsch@s2005.tu-chemnitz.de>
+ * Copyright 2011-2012, cozybit Inc.
+ * Copyright (C) 2021 Intel Corporation
+ */
+
+#include "ieee80211_i.h"
+#include "mesh.h"
+#include "driver-ops.h"
+
+/* This is not in the standard.  It represents a tolerable tsf drift below
+ * which we do no TSF adjustment.
+ */
+#define TOFFSET_MINIMUM_ADJUSTMENT 10
+
+/* This is not in the standard. It is a margin added to the
+ * Toffset setpoint to mitigate TSF overcorrection
+ * introduced by TSF adjustment latency.
+ */
+#define TOFFSET_SET_MARGIN 20
+
+/* This is not in the standard.  It represents the maximum Toffset jump above
+ * which we'll invalidate the Toffset setpoint and choose a new setpoint.  This
+ * could be, for instance, in case a neighbor is restarted and its TSF counter
+ * reset.
+ */
+#define TOFFSET_MAXIMUM_ADJUSTMENT 800		/* 0.8 ms */
+
+struct sync_method {
+	u8 method;
+	struct ieee80211_mesh_sync_ops ops;
+};
+
+/**
+ * mesh_peer_tbtt_adjusting - check if an mp is currently adjusting its TBTT
+ *
+ * @cfg: mesh config element from the mesh peer (or %NULL)
+ */
+static bool mesh_peer_tbtt_adjusting(const struct ieee80211_meshconf_ie *cfg)
+{
+	return cfg &&
+	       (cfg->meshconf_cap & IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING);
+}
+
+void mesh_sync_adjust_tsf(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+	/* sdata->vif.bss_conf.beacon_int in 1024us units, 0.04% */
+	u64 beacon_int_fraction = sdata->vif.bss_conf.beacon_int * 1024 / 2500;
+	u64 tsf;
+	u64 tsfdelta;
+
+	spin_lock_bh(&ifmsh->sync_offset_lock);
+	if (ifmsh->sync_offset_clockdrift_max < beacon_int_fraction) {
+		msync_dbg(sdata, "TSF : max clockdrift=%lld; adjusting\n",
+			  (long long) ifmsh->sync_offset_clockdrift_max);
+		tsfdelta = -ifmsh->sync_offset_clockdrift_max;
+		ifmsh->sync_offset_clockdrift_max = 0;
+	} else {
+		msync_dbg(sdata, "TSF : max clockdrift=%lld; adjusting by %llu\n",
+			  (long long) ifmsh->sync_offset_clockdrift_max,
+			  (unsigned long long) beacon_int_fraction);
+		tsfdelta = -beacon_int_fraction;
+		ifmsh->sync_offset_clockdrift_max -= beacon_int_fraction;
+	}
+	spin_unlock_bh(&ifmsh->sync_offset_lock);
+
+	if (local->ops->offset_tsf) {
+		drv_offset_tsf(local, sdata, tsfdelta);
+	} else {
+		tsf = drv_get_tsf(local, sdata);
+		if (tsf != -1ULL)
+			drv_set_tsf(local, sdata, tsf + tsfdelta);
+	}
+}
+
+static void
+mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, u16 stype,
+			      struct ieee80211_mgmt *mgmt, unsigned int len,
+			      const struct ieee80211_meshconf_ie *mesh_cfg,
+			      struct ieee80211_rx_status *rx_status)
+{
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+	struct ieee80211_local *local = sdata->local;
+	struct sta_info *sta;
+	u64 t_t, t_r;
+
+	WARN_ON(ifmsh->mesh_sp_id != IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET);
+
+	/* standard mentions only beacons */
+	if (stype != IEEE80211_STYPE_BEACON)
+		return;
+
+	/*
+	 * Get time when timestamp field was received.  If we don't
+	 * have rx timestamps, then use current tsf as an approximation.
+	 * drv_get_tsf() must be called before entering the rcu-read
+	 * section.
+	 */
+	if (ieee80211_have_rx_timestamp(rx_status))
+		t_r = ieee80211_calculate_rx_timestamp(local, rx_status,
+						       len + FCS_LEN, 24);
+	else
+		t_r = drv_get_tsf(local, sdata);
+
+	rcu_read_lock();
+	sta = sta_info_get(sdata, mgmt->sa);
+	if (!sta)
+		goto no_sync;
+
+	/* check offset sync conditions (13.13.2.2.1)
+	 *
+	 * TODO also sync to
+	 * dot11MeshNbrOffsetMaxNeighbor non-peer non-MBSS neighbors
+	 */
+
+	if (mesh_peer_tbtt_adjusting(mesh_cfg)) {
+		msync_dbg(sdata, "STA %pM : is adjusting TBTT\n",
+			  sta->sta.addr);
+		goto no_sync;
+	}
+
+	/* Timing offset calculation (see 13.13.2.2.2) */
+	t_t = le64_to_cpu(mgmt->u.beacon.timestamp);
+	sta->mesh->t_offset = t_t - t_r;
+
+	if (test_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN)) {
+		s64 t_clockdrift = sta->mesh->t_offset_setpoint - sta->mesh->t_offset;
+		msync_dbg(sdata,
+			  "STA %pM : t_offset=%lld, t_offset_setpoint=%lld, t_clockdrift=%lld\n",
+			  sta->sta.addr, (long long) sta->mesh->t_offset,
+			  (long long) sta->mesh->t_offset_setpoint,
+			  (long long) t_clockdrift);
+
+		if (t_clockdrift > TOFFSET_MAXIMUM_ADJUSTMENT ||
+		    t_clockdrift < -TOFFSET_MAXIMUM_ADJUSTMENT) {
+			msync_dbg(sdata,
+				  "STA %pM : t_clockdrift=%lld too large, setpoint reset\n",
+				  sta->sta.addr,
+				  (long long) t_clockdrift);
+			clear_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
+			goto no_sync;
+		}
+
+		spin_lock_bh(&ifmsh->sync_offset_lock);
+		if (t_clockdrift > ifmsh->sync_offset_clockdrift_max)
+			ifmsh->sync_offset_clockdrift_max = t_clockdrift;
+		spin_unlock_bh(&ifmsh->sync_offset_lock);
+	} else {
+		sta->mesh->t_offset_setpoint = sta->mesh->t_offset - TOFFSET_SET_MARGIN;
+		set_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
+		msync_dbg(sdata,
+			  "STA %pM : offset was invalid, t_offset=%lld\n",
+			  sta->sta.addr,
+			  (long long) sta->mesh->t_offset);
+	}
+
+no_sync:
+	rcu_read_unlock();
+}
+
+static void mesh_sync_offset_adjust_tsf(struct ieee80211_sub_if_data *sdata,
+					 struct beacon_data *beacon)
+{
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+
+	WARN_ON(ifmsh->mesh_sp_id != IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET);
+	WARN_ON(!rcu_read_lock_held());
+
+	spin_lock_bh(&ifmsh->sync_offset_lock);
+
+	if (ifmsh->sync_offset_clockdrift_max > TOFFSET_MINIMUM_ADJUSTMENT) {
+		/* Since ajusting the tsf here would
+		 * require a possibly blocking call
+		 * to the driver tsf setter, we punt
+		 * the tsf adjustment to the mesh tasklet
+		 */
+		msync_dbg(sdata,
+			  "TSF : kicking off TSF adjustment with clockdrift_max=%lld\n",
+			  ifmsh->sync_offset_clockdrift_max);
+		set_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags);
+	} else {
+		msync_dbg(sdata,
+			  "TSF : max clockdrift=%lld; too small to adjust\n",
+			  (long long)ifmsh->sync_offset_clockdrift_max);
+		ifmsh->sync_offset_clockdrift_max = 0;
+	}
+	spin_unlock_bh(&ifmsh->sync_offset_lock);
+}
+
+static const struct sync_method sync_methods[] = {
+	{
+		.method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET,
+		.ops = {
+			.rx_bcn_presp = &mesh_sync_offset_rx_bcn_presp,
+			.adjust_tsf = &mesh_sync_offset_adjust_tsf,
+		}
+	},
+};
+
+const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method)
+{
+	int i;
+
+	for (i = 0 ; i < ARRAY_SIZE(sync_methods); ++i) {
+		if (sync_methods[i].method == method)
+			return &sync_methods[i].ops;
+	}
+	return NULL;
+}