diff options
Diffstat (limited to 'net/mac80211/mlme.c')
| -rw-r--r-- | net/mac80211/mlme.c | 7444 |
1 files changed, 7444 insertions, 0 deletions
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c new file mode 100644 index 000000000..c07645c99 --- /dev/null +++ b/net/mac80211/mlme.c @@ -0,0 +1,7444 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * BSS client mode implementation + * Copyright 2003-2008, Jouni Malinen <j@w1.fi> + * Copyright 2004, Instant802 Networks, Inc. + * Copyright 2005, Devicescape Software, Inc. + * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> + * Copyright 2007, Michael Wu <flamingice@sourmilk.net> + * Copyright 2013-2014 Intel Mobile Communications GmbH + * Copyright (C) 2015 - 2017 Intel Deutschland GmbH + * Copyright (C) 2018 - 2022 Intel Corporation + */ + +#include <linux/delay.h> +#include <linux/fips.h> +#include <linux/if_ether.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/moduleparam.h> +#include <linux/rtnetlink.h> +#include <linux/crc32.h> +#include <linux/slab.h> +#include <linux/export.h> +#include <net/mac80211.h> +#include <asm/unaligned.h> + +#include "ieee80211_i.h" +#include "driver-ops.h" +#include "rate.h" +#include "led.h" +#include "fils_aead.h" + +#define IEEE80211_AUTH_TIMEOUT (HZ / 5) +#define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2) +#define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10) +#define IEEE80211_AUTH_TIMEOUT_SAE (HZ * 2) +#define IEEE80211_AUTH_MAX_TRIES 3 +#define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5) +#define IEEE80211_AUTH_WAIT_SAE_RETRY (HZ * 2) +#define IEEE80211_ASSOC_TIMEOUT (HZ / 5) +#define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2) +#define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10) +#define IEEE80211_ASSOC_MAX_TRIES 3 + +static int max_nullfunc_tries = 2; +module_param(max_nullfunc_tries, int, 0644); +MODULE_PARM_DESC(max_nullfunc_tries, + "Maximum nullfunc tx tries before disconnecting (reason 4)."); + +static int max_probe_tries = 5; +module_param(max_probe_tries, int, 0644); +MODULE_PARM_DESC(max_probe_tries, + "Maximum probe tries before disconnecting (reason 4)."); + +/* + * Beacon loss timeout is calculated as N frames times the + * advertised beacon interval. This may need to be somewhat + * higher than what hardware might detect to account for + * delays in the host processing frames. But since we also + * probe on beacon miss before declaring the connection lost + * default to what we want. + */ +static int beacon_loss_count = 7; +module_param(beacon_loss_count, int, 0644); +MODULE_PARM_DESC(beacon_loss_count, + "Number of beacon intervals before we decide beacon was lost."); + +/* + * Time the connection can be idle before we probe + * it to see if we can still talk to the AP. + */ +#define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ) +/* + * Time we wait for a probe response after sending + * a probe request because of beacon loss or for + * checking the connection still works. + */ +static int probe_wait_ms = 500; +module_param(probe_wait_ms, int, 0644); +MODULE_PARM_DESC(probe_wait_ms, + "Maximum time(ms) to wait for probe response" + " before disconnecting (reason 4)."); + +/* + * How many Beacon frames need to have been used in average signal strength + * before starting to indicate signal change events. + */ +#define IEEE80211_SIGNAL_AVE_MIN_COUNT 4 + +/* + * We can have multiple work items (and connection probing) + * scheduling this timer, but we need to take care to only + * reschedule it when it should fire _earlier_ than it was + * asked for before, or if it's not pending right now. This + * function ensures that. Note that it then is required to + * run this function for all timeouts after the first one + * has happened -- the work that runs from this timer will + * do that. + */ +static void run_again(struct ieee80211_sub_if_data *sdata, + unsigned long timeout) +{ + sdata_assert_lock(sdata); + + if (!timer_pending(&sdata->u.mgd.timer) || + time_before(timeout, sdata->u.mgd.timer.expires)) + mod_timer(&sdata->u.mgd.timer, timeout); +} + +void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata) +{ + if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER) + return; + + if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) + return; + + mod_timer(&sdata->u.mgd.bcn_mon_timer, + round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout)); +} + +void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + + if (unlikely(!ifmgd->associated)) + return; + + if (ifmgd->probe_send_count) + ifmgd->probe_send_count = 0; + + if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) + return; + + mod_timer(&ifmgd->conn_mon_timer, + round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME)); +} + +static int ecw2cw(int ecw) +{ + return (1 << ecw) - 1; +} + +static ieee80211_conn_flags_t +ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, + struct ieee80211_link_data *link, + ieee80211_conn_flags_t conn_flags, + struct ieee80211_supported_band *sband, + struct ieee80211_channel *channel, + u32 vht_cap_info, + const struct ieee80211_ht_operation *ht_oper, + const struct ieee80211_vht_operation *vht_oper, + const struct ieee80211_he_operation *he_oper, + const struct ieee80211_eht_operation *eht_oper, + const struct ieee80211_s1g_oper_ie *s1g_oper, + struct cfg80211_chan_def *chandef, bool tracking) +{ + struct cfg80211_chan_def vht_chandef; + struct ieee80211_sta_ht_cap sta_ht_cap; + ieee80211_conn_flags_t ret; + u32 ht_cfreq; + + memset(chandef, 0, sizeof(struct cfg80211_chan_def)); + chandef->chan = channel; + chandef->width = NL80211_CHAN_WIDTH_20_NOHT; + chandef->center_freq1 = channel->center_freq; + chandef->freq1_offset = channel->freq_offset; + + if (channel->band == NL80211_BAND_6GHZ) { + if (!ieee80211_chandef_he_6ghz_oper(sdata, he_oper, eht_oper, + chandef)) { + mlme_dbg(sdata, + "bad 6 GHz operation, disabling HT/VHT/HE/EHT\n"); + ret = IEEE80211_CONN_DISABLE_HT | + IEEE80211_CONN_DISABLE_VHT | + IEEE80211_CONN_DISABLE_HE | + IEEE80211_CONN_DISABLE_EHT; + } else { + ret = 0; + } + vht_chandef = *chandef; + goto out; + } else if (sband->band == NL80211_BAND_S1GHZ) { + if (!ieee80211_chandef_s1g_oper(s1g_oper, chandef)) { + sdata_info(sdata, + "Missing S1G Operation Element? Trying operating == primary\n"); + chandef->width = ieee80211_s1g_channel_width(channel); + } + + ret = IEEE80211_CONN_DISABLE_HT | IEEE80211_CONN_DISABLE_40MHZ | + IEEE80211_CONN_DISABLE_VHT | + IEEE80211_CONN_DISABLE_80P80MHZ | + IEEE80211_CONN_DISABLE_160MHZ; + goto out; + } + + memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap)); + ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); + + if (!ht_oper || !sta_ht_cap.ht_supported) { + mlme_dbg(sdata, "HT operation missing / HT not supported\n"); + ret = IEEE80211_CONN_DISABLE_HT | + IEEE80211_CONN_DISABLE_VHT | + IEEE80211_CONN_DISABLE_HE | + IEEE80211_CONN_DISABLE_EHT; + goto out; + } + + chandef->width = NL80211_CHAN_WIDTH_20; + + ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, + channel->band); + /* check that channel matches the right operating channel */ + if (!tracking && channel->center_freq != ht_cfreq) { + /* + * It's possible that some APs are confused here; + * Netgear WNDR3700 sometimes reports 4 higher than + * the actual channel in association responses, but + * since we look at probe response/beacon data here + * it should be OK. + */ + sdata_info(sdata, + "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", + channel->center_freq, ht_cfreq, + ht_oper->primary_chan, channel->band); + ret = IEEE80211_CONN_DISABLE_HT | + IEEE80211_CONN_DISABLE_VHT | + IEEE80211_CONN_DISABLE_HE | + IEEE80211_CONN_DISABLE_EHT; + goto out; + } + + /* check 40 MHz support, if we have it */ + if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { + ieee80211_chandef_ht_oper(ht_oper, chandef); + } else { + mlme_dbg(sdata, "40 MHz not supported\n"); + /* 40 MHz (and 80 MHz) must be supported for VHT */ + ret = IEEE80211_CONN_DISABLE_VHT; + /* also mark 40 MHz disabled */ + ret |= IEEE80211_CONN_DISABLE_40MHZ; + goto out; + } + + if (!vht_oper || !sband->vht_cap.vht_supported) { + mlme_dbg(sdata, "VHT operation missing / VHT not supported\n"); + ret = IEEE80211_CONN_DISABLE_VHT; + goto out; + } + + vht_chandef = *chandef; + if (!(conn_flags & IEEE80211_CONN_DISABLE_HE) && + he_oper && + (le32_to_cpu(he_oper->he_oper_params) & + IEEE80211_HE_OPERATION_VHT_OPER_INFO)) { + struct ieee80211_vht_operation he_oper_vht_cap; + + /* + * Set only first 3 bytes (other 2 aren't used in + * ieee80211_chandef_vht_oper() anyway) + */ + memcpy(&he_oper_vht_cap, he_oper->optional, 3); + he_oper_vht_cap.basic_mcs_set = cpu_to_le16(0); + + if (!ieee80211_chandef_vht_oper(&sdata->local->hw, vht_cap_info, + &he_oper_vht_cap, ht_oper, + &vht_chandef)) { + if (!(conn_flags & IEEE80211_CONN_DISABLE_HE)) + sdata_info(sdata, + "HE AP VHT information is invalid, disabling HE\n"); + ret = IEEE80211_CONN_DISABLE_HE | IEEE80211_CONN_DISABLE_EHT; + goto out; + } + } else if (!ieee80211_chandef_vht_oper(&sdata->local->hw, + vht_cap_info, + vht_oper, ht_oper, + &vht_chandef)) { + if (!(conn_flags & IEEE80211_CONN_DISABLE_VHT)) + sdata_info(sdata, + "AP VHT information is invalid, disabling VHT\n"); + ret = IEEE80211_CONN_DISABLE_VHT; + goto out; + } + + if (!cfg80211_chandef_valid(&vht_chandef)) { + if (!(conn_flags & IEEE80211_CONN_DISABLE_VHT)) + sdata_info(sdata, + "AP VHT information is invalid, disabling VHT\n"); + ret = IEEE80211_CONN_DISABLE_VHT; + goto out; + } + + if (cfg80211_chandef_identical(chandef, &vht_chandef)) { + ret = 0; + goto out; + } + + if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { + if (!(conn_flags & IEEE80211_CONN_DISABLE_VHT)) + sdata_info(sdata, + "AP VHT information doesn't match HT, disabling VHT\n"); + ret = IEEE80211_CONN_DISABLE_VHT; + goto out; + } + + *chandef = vht_chandef; + + /* + * handle the case that the EHT operation indicates that it holds EHT + * operation information (in case that the channel width differs from + * the channel width reported in HT/VHT/HE). + */ + if (eht_oper && (eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT)) { + struct cfg80211_chan_def eht_chandef = *chandef; + + ieee80211_chandef_eht_oper(eht_oper, + eht_chandef.width == + NL80211_CHAN_WIDTH_160, + false, &eht_chandef); + + if (!cfg80211_chandef_valid(&eht_chandef)) { + if (!(conn_flags & IEEE80211_CONN_DISABLE_EHT)) + sdata_info(sdata, + "AP EHT information is invalid, disabling EHT\n"); + ret = IEEE80211_CONN_DISABLE_EHT; + goto out; + } + + if (!cfg80211_chandef_compatible(chandef, &eht_chandef)) { + if (!(conn_flags & IEEE80211_CONN_DISABLE_EHT)) + sdata_info(sdata, + "AP EHT information is incompatible, disabling EHT\n"); + ret = IEEE80211_CONN_DISABLE_EHT; + goto out; + } + + *chandef = eht_chandef; + } + + ret = 0; + +out: + /* + * When tracking the current AP, don't do any further checks if the + * new chandef is identical to the one we're currently using for the + * connection. This keeps us from playing ping-pong with regulatory, + * without it the following can happen (for example): + * - connect to an AP with 80 MHz, world regdom allows 80 MHz + * - AP advertises regdom US + * - CRDA loads regdom US with 80 MHz prohibited (old database) + * - the code below detects an unsupported channel, downgrades, and + * we disconnect from the AP in the caller + * - disconnect causes CRDA to reload world regdomain and the game + * starts anew. + * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881) + * + * It seems possible that there are still scenarios with CSA or real + * bandwidth changes where a this could happen, but those cases are + * less common and wouldn't completely prevent using the AP. + */ + if (tracking && + cfg80211_chandef_identical(chandef, &link->conf->chandef)) + return ret; + + /* don't print the message below for VHT mismatch if VHT is disabled */ + if (ret & IEEE80211_CONN_DISABLE_VHT) + vht_chandef = *chandef; + + /* + * Ignore the DISABLED flag when we're already connected and only + * tracking the APs beacon for bandwidth changes - otherwise we + * might get disconnected here if we connect to an AP, update our + * regulatory information based on the AP's country IE and the + * information we have is wrong/outdated and disables the channel + * that we're actually using for the connection to the AP. + */ + while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, + tracking ? 0 : + IEEE80211_CHAN_DISABLED)) { + if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { + ret = IEEE80211_CONN_DISABLE_HT | + IEEE80211_CONN_DISABLE_VHT | + IEEE80211_CONN_DISABLE_HE | + IEEE80211_CONN_DISABLE_EHT; + break; + } + + ret |= ieee80211_chandef_downgrade(chandef); + } + + if (!he_oper || !cfg80211_chandef_usable(sdata->wdev.wiphy, chandef, + IEEE80211_CHAN_NO_HE)) + ret |= IEEE80211_CONN_DISABLE_HE | IEEE80211_CONN_DISABLE_EHT; + + if (!eht_oper || !cfg80211_chandef_usable(sdata->wdev.wiphy, chandef, + IEEE80211_CHAN_NO_EHT)) + ret |= IEEE80211_CONN_DISABLE_EHT; + + if (chandef->width != vht_chandef.width && !tracking) + sdata_info(sdata, + "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); + + WARN_ON_ONCE(!cfg80211_chandef_valid(chandef)); + return ret; +} + +static int ieee80211_config_bw(struct ieee80211_link_data *link, + const struct ieee80211_ht_cap *ht_cap, + const struct ieee80211_vht_cap *vht_cap, + const struct ieee80211_ht_operation *ht_oper, + const struct ieee80211_vht_operation *vht_oper, + const struct ieee80211_he_operation *he_oper, + const struct ieee80211_eht_operation *eht_oper, + const struct ieee80211_s1g_oper_ie *s1g_oper, + const u8 *bssid, u32 *changed) +{ + struct ieee80211_sub_if_data *sdata = link->sdata; + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_channel *chan = link->conf->chandef.chan; + struct ieee80211_supported_band *sband = + local->hw.wiphy->bands[chan->band]; + struct cfg80211_chan_def chandef; + u16 ht_opmode; + ieee80211_conn_flags_t flags; + u32 vht_cap_info = 0; + int ret; + + /* if HT was/is disabled, don't track any bandwidth changes */ + if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT || !ht_oper) + return 0; + + /* don't check VHT if we associated as non-VHT station */ + if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT) + vht_oper = NULL; + + /* don't check HE if we associated as non-HE station */ + if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE || + !ieee80211_get_he_iftype_cap(sband, + ieee80211_vif_type_p2p(&sdata->vif))) { + he_oper = NULL; + eht_oper = NULL; + } + + /* don't check EHT if we associated as non-EHT station */ + if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_EHT || + !ieee80211_get_eht_iftype_cap(sband, + ieee80211_vif_type_p2p(&sdata->vif))) + eht_oper = NULL; + + /* + * if bss configuration changed store the new one - + * this may be applicable even if channel is identical + */ + ht_opmode = le16_to_cpu(ht_oper->operation_mode); + if (link->conf->ht_operation_mode != ht_opmode) { + *changed |= BSS_CHANGED_HT; + link->conf->ht_operation_mode = ht_opmode; + } + + if (vht_cap) + vht_cap_info = le32_to_cpu(vht_cap->vht_cap_info); + + /* calculate new channel (type) based on HT/VHT/HE operation IEs */ + flags = ieee80211_determine_chantype(sdata, link, + link->u.mgd.conn_flags, + sband, chan, vht_cap_info, + ht_oper, vht_oper, + he_oper, eht_oper, + s1g_oper, &chandef, true); + + /* + * Downgrade the new channel if we associated with restricted + * capabilities. For example, if we associated as a 20 MHz STA + * to a 40 MHz AP (due to regulatory, capabilities or config + * reasons) then switching to a 40 MHz channel now won't do us + * any good -- we couldn't use it with the AP. + */ + if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_80P80MHZ && + chandef.width == NL80211_CHAN_WIDTH_80P80) + flags |= ieee80211_chandef_downgrade(&chandef); + if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_160MHZ && + chandef.width == NL80211_CHAN_WIDTH_160) + flags |= ieee80211_chandef_downgrade(&chandef); + if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_40MHZ && + chandef.width > NL80211_CHAN_WIDTH_20) + flags |= ieee80211_chandef_downgrade(&chandef); + + if (cfg80211_chandef_identical(&chandef, &link->conf->chandef)) + return 0; + + link_info(link, + "AP %pM changed bandwidth, new config is %d.%03d MHz, width %d (%d.%03d/%d MHz)\n", + link->u.mgd.bssid, chandef.chan->center_freq, + chandef.chan->freq_offset, chandef.width, + chandef.center_freq1, chandef.freq1_offset, + chandef.center_freq2); + + if (flags != (link->u.mgd.conn_flags & + (IEEE80211_CONN_DISABLE_HT | + IEEE80211_CONN_DISABLE_VHT | + IEEE80211_CONN_DISABLE_HE | + IEEE80211_CONN_DISABLE_EHT | + IEEE80211_CONN_DISABLE_40MHZ | + IEEE80211_CONN_DISABLE_80P80MHZ | + IEEE80211_CONN_DISABLE_160MHZ | + IEEE80211_CONN_DISABLE_320MHZ)) || + !cfg80211_chandef_valid(&chandef)) { + sdata_info(sdata, + "AP %pM changed caps/bw in a way we can't support (0x%x/0x%x) - disconnect\n", + link->u.mgd.bssid, flags, ifmgd->flags); + return -EINVAL; + } + + ret = ieee80211_link_change_bandwidth(link, &chandef, changed); + + if (ret) { + sdata_info(sdata, + "AP %pM changed bandwidth to incompatible one - disconnect\n", + link->u.mgd.bssid); + return ret; + } + + return 0; +} + +/* frame sending functions */ + +static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb, u8 ap_ht_param, + struct ieee80211_supported_band *sband, + struct ieee80211_channel *channel, + enum ieee80211_smps_mode smps, + ieee80211_conn_flags_t conn_flags) +{ + u8 *pos; + u32 flags = channel->flags; + u16 cap; + struct ieee80211_sta_ht_cap ht_cap; + + BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap)); + + memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap)); + ieee80211_apply_htcap_overrides(sdata, &ht_cap); + + /* determine capability flags */ + cap = ht_cap.cap; + + switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + if (flags & IEEE80211_CHAN_NO_HT40PLUS) { + cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + cap &= ~IEEE80211_HT_CAP_SGI_40; + } + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + if (flags & IEEE80211_CHAN_NO_HT40MINUS) { + cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + cap &= ~IEEE80211_HT_CAP_SGI_40; + } + break; + } + + /* + * If 40 MHz was disabled associate as though we weren't + * capable of 40 MHz -- some broken APs will never fall + * back to trying to transmit in 20 MHz. + */ + if (conn_flags & IEEE80211_CONN_DISABLE_40MHZ) { + cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + cap &= ~IEEE80211_HT_CAP_SGI_40; + } + + /* set SM PS mode properly */ + cap &= ~IEEE80211_HT_CAP_SM_PS; + switch (smps) { + case IEEE80211_SMPS_AUTOMATIC: + case IEEE80211_SMPS_NUM_MODES: + WARN_ON(1); + fallthrough; + case IEEE80211_SMPS_OFF: + cap |= WLAN_HT_CAP_SM_PS_DISABLED << + IEEE80211_HT_CAP_SM_PS_SHIFT; + break; + case IEEE80211_SMPS_STATIC: + cap |= WLAN_HT_CAP_SM_PS_STATIC << + IEEE80211_HT_CAP_SM_PS_SHIFT; + break; + case IEEE80211_SMPS_DYNAMIC: + cap |= WLAN_HT_CAP_SM_PS_DYNAMIC << + IEEE80211_HT_CAP_SM_PS_SHIFT; + break; + } + + /* reserve and fill IE */ + pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2); + ieee80211_ie_build_ht_cap(pos, &ht_cap, cap); +} + +/* This function determines vht capability flags for the association + * and builds the IE. + * Note - the function returns true to own the MU-MIMO capability + */ +static bool ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb, + struct ieee80211_supported_band *sband, + struct ieee80211_vht_cap *ap_vht_cap, + ieee80211_conn_flags_t conn_flags) +{ + struct ieee80211_local *local = sdata->local; + u8 *pos; + u32 cap; + struct ieee80211_sta_vht_cap vht_cap; + u32 mask, ap_bf_sts, our_bf_sts; + bool mu_mimo_owner = false; + + BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap)); + + memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap)); + ieee80211_apply_vhtcap_overrides(sdata, &vht_cap); + + /* determine capability flags */ + cap = vht_cap.cap; + + if (conn_flags & IEEE80211_CONN_DISABLE_80P80MHZ) { + u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; + + cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; + if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ || + bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) + cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; + } + + if (conn_flags & IEEE80211_CONN_DISABLE_160MHZ) { + cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160; + cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; + } + + /* + * Some APs apparently get confused if our capabilities are better + * than theirs, so restrict what we advertise in the assoc request. + */ + if (!(ap_vht_cap->vht_cap_info & + cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE))) + cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | + IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE); + else if (!(ap_vht_cap->vht_cap_info & + cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE))) + cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; + + /* + * If some other vif is using the MU-MIMO capability we cannot associate + * using MU-MIMO - this will lead to contradictions in the group-id + * mechanism. + * Ownership is defined since association request, in order to avoid + * simultaneous associations with MU-MIMO. + */ + if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) { + bool disable_mu_mimo = false; + struct ieee80211_sub_if_data *other; + + list_for_each_entry_rcu(other, &local->interfaces, list) { + if (other->vif.bss_conf.mu_mimo_owner) { + disable_mu_mimo = true; + break; + } + } + if (disable_mu_mimo) + cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; + else + mu_mimo_owner = true; + } + + mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK; + + ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask; + our_bf_sts = cap & mask; + + if (ap_bf_sts < our_bf_sts) { + cap &= ~mask; + cap |= ap_bf_sts; + } + + /* reserve and fill IE */ + pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2); + ieee80211_ie_build_vht_cap(pos, &vht_cap, cap); + + return mu_mimo_owner; +} + +/* This function determines HE capability flags for the association + * and builds the IE. + */ +static void ieee80211_add_he_ie(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb, + struct ieee80211_supported_band *sband, + enum ieee80211_smps_mode smps_mode, + ieee80211_conn_flags_t conn_flags) +{ + u8 *pos, *pre_he_pos; + const struct ieee80211_sta_he_cap *he_cap; + u8 he_cap_size; + + he_cap = ieee80211_get_he_iftype_cap(sband, + ieee80211_vif_type_p2p(&sdata->vif)); + if (WARN_ON(!he_cap)) + return; + + /* get a max size estimate */ + he_cap_size = + 2 + 1 + sizeof(he_cap->he_cap_elem) + + ieee80211_he_mcs_nss_size(&he_cap->he_cap_elem) + + ieee80211_he_ppe_size(he_cap->ppe_thres[0], + he_cap->he_cap_elem.phy_cap_info); + pos = skb_put(skb, he_cap_size); + pre_he_pos = pos; + pos = ieee80211_ie_build_he_cap(conn_flags, + pos, he_cap, pos + he_cap_size); + /* trim excess if any */ + skb_trim(skb, skb->len - (pre_he_pos + he_cap_size - pos)); + + ieee80211_ie_build_he_6ghz_cap(sdata, smps_mode, skb); +} + +static void ieee80211_add_eht_ie(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb, + struct ieee80211_supported_band *sband) +{ + u8 *pos; + const struct ieee80211_sta_he_cap *he_cap; + const struct ieee80211_sta_eht_cap *eht_cap; + u8 eht_cap_size; + + he_cap = ieee80211_get_he_iftype_cap(sband, + ieee80211_vif_type_p2p(&sdata->vif)); + eht_cap = ieee80211_get_eht_iftype_cap(sband, + ieee80211_vif_type_p2p(&sdata->vif)); + + /* + * EHT capabilities element is only added if the HE capabilities element + * was added so assume that 'he_cap' is valid and don't check it. + */ + if (WARN_ON(!he_cap || !eht_cap)) + return; + + eht_cap_size = + 2 + 1 + sizeof(eht_cap->eht_cap_elem) + + ieee80211_eht_mcs_nss_size(&he_cap->he_cap_elem, + &eht_cap->eht_cap_elem, + false) + + ieee80211_eht_ppe_size(eht_cap->eht_ppe_thres[0], + eht_cap->eht_cap_elem.phy_cap_info); + pos = skb_put(skb, eht_cap_size); + ieee80211_ie_build_eht_cap(pos, he_cap, eht_cap, pos + eht_cap_size, + false); +} + +static void ieee80211_assoc_add_rates(struct sk_buff *skb, + enum nl80211_chan_width width, + struct ieee80211_supported_band *sband, + struct ieee80211_mgd_assoc_data *assoc_data) +{ + unsigned int shift = ieee80211_chanwidth_get_shift(width); + unsigned int rates_len, supp_rates_len; + u32 rates = 0; + int i, count; + u8 *pos; + + if (assoc_data->supp_rates_len) { + /* + * Get all rates supported by the device and the AP as + * some APs don't like getting a superset of their rates + * in the association request (e.g. D-Link DAP 1353 in + * b-only mode)... + */ + rates_len = ieee80211_parse_bitrates(width, sband, + assoc_data->supp_rates, + assoc_data->supp_rates_len, + &rates); + } else { + /* + * In case AP not provide any supported rates information + * before association, we send information element(s) with + * all rates that we support. + */ + rates_len = sband->n_bitrates; + for (i = 0; i < sband->n_bitrates; i++) + rates |= BIT(i); + } + + supp_rates_len = rates_len; + if (supp_rates_len > 8) + supp_rates_len = 8; + + pos = skb_put(skb, supp_rates_len + 2); + *pos++ = WLAN_EID_SUPP_RATES; + *pos++ = supp_rates_len; + + count = 0; + for (i = 0; i < sband->n_bitrates; i++) { + if (BIT(i) & rates) { + int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate, + 5 * (1 << shift)); + *pos++ = (u8)rate; + if (++count == 8) + break; + } + } + + if (rates_len > count) { + pos = skb_put(skb, rates_len - count + 2); + *pos++ = WLAN_EID_EXT_SUPP_RATES; + *pos++ = rates_len - count; + + for (i++; i < sband->n_bitrates; i++) { + if (BIT(i) & rates) { + int rate; + + rate = DIV_ROUND_UP(sband->bitrates[i].bitrate, + 5 * (1 << shift)); + *pos++ = (u8)rate; + } + } + } +} + +static size_t ieee80211_add_before_ht_elems(struct sk_buff *skb, + const u8 *elems, + size_t elems_len, + size_t offset) +{ + size_t noffset; + + static const u8 before_ht[] = { + WLAN_EID_SSID, + WLAN_EID_SUPP_RATES, + WLAN_EID_EXT_SUPP_RATES, + WLAN_EID_PWR_CAPABILITY, + WLAN_EID_SUPPORTED_CHANNELS, + WLAN_EID_RSN, + WLAN_EID_QOS_CAPA, + WLAN_EID_RRM_ENABLED_CAPABILITIES, + WLAN_EID_MOBILITY_DOMAIN, + WLAN_EID_FAST_BSS_TRANSITION, /* reassoc only */ + WLAN_EID_RIC_DATA, /* reassoc only */ + WLAN_EID_SUPPORTED_REGULATORY_CLASSES, + }; + static const u8 after_ric[] = { + WLAN_EID_SUPPORTED_REGULATORY_CLASSES, + WLAN_EID_HT_CAPABILITY, + WLAN_EID_BSS_COEX_2040, + /* luckily this is almost always there */ + WLAN_EID_EXT_CAPABILITY, + WLAN_EID_QOS_TRAFFIC_CAPA, + WLAN_EID_TIM_BCAST_REQ, + WLAN_EID_INTERWORKING, + /* 60 GHz (Multi-band, DMG, MMS) can't happen */ + WLAN_EID_VHT_CAPABILITY, + WLAN_EID_OPMODE_NOTIF, + }; + + if (!elems_len) + return offset; + + noffset = ieee80211_ie_split_ric(elems, elems_len, + before_ht, + ARRAY_SIZE(before_ht), + after_ric, + ARRAY_SIZE(after_ric), + offset); + skb_put_data(skb, elems + offset, noffset - offset); + + return noffset; +} + +static size_t ieee80211_add_before_vht_elems(struct sk_buff *skb, + const u8 *elems, + size_t elems_len, + size_t offset) +{ + static const u8 before_vht[] = { + /* + * no need to list the ones split off before HT + * or generated here + */ + WLAN_EID_BSS_COEX_2040, + WLAN_EID_EXT_CAPABILITY, + WLAN_EID_QOS_TRAFFIC_CAPA, + WLAN_EID_TIM_BCAST_REQ, + WLAN_EID_INTERWORKING, + /* 60 GHz (Multi-band, DMG, MMS) can't happen */ + }; + size_t noffset; + + if (!elems_len) + return offset; + + /* RIC already taken care of in ieee80211_add_before_ht_elems() */ + noffset = ieee80211_ie_split(elems, elems_len, + before_vht, ARRAY_SIZE(before_vht), + offset); + skb_put_data(skb, elems + offset, noffset - offset); + + return noffset; +} + +static size_t ieee80211_add_before_he_elems(struct sk_buff *skb, + const u8 *elems, + size_t elems_len, + size_t offset) +{ + static const u8 before_he[] = { + /* + * no need to list the ones split off before VHT + * or generated here + */ + WLAN_EID_OPMODE_NOTIF, + WLAN_EID_EXTENSION, WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE, + /* 11ai elements */ + WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_SESSION, + WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_PUBLIC_KEY, + WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_KEY_CONFIRM, + WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_HLP_CONTAINER, + WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN, + /* TODO: add 11ah/11aj/11ak elements */ + }; + size_t noffset; + + if (!elems_len) + return offset; + + /* RIC already taken care of in ieee80211_add_before_ht_elems() */ + noffset = ieee80211_ie_split(elems, elems_len, + before_he, ARRAY_SIZE(before_he), + offset); + skb_put_data(skb, elems + offset, noffset - offset); + + return noffset; +} + +#define PRESENT_ELEMS_MAX 8 +#define PRESENT_ELEM_EXT_OFFS 0x100 + +static void ieee80211_assoc_add_ml_elem(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb, u16 capab, + const struct element *ext_capa, + const u16 *present_elems); + +static size_t ieee80211_assoc_link_elems(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb, u16 *capab, + const struct element *ext_capa, + const u8 *extra_elems, + size_t extra_elems_len, + unsigned int link_id, + struct ieee80211_link_data *link, + u16 *present_elems) +{ + enum nl80211_iftype iftype = ieee80211_vif_type_p2p(&sdata->vif); + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; + struct cfg80211_bss *cbss = assoc_data->link[link_id].bss; + struct ieee80211_channel *chan = cbss->channel; + const struct ieee80211_sband_iftype_data *iftd; + struct ieee80211_local *local = sdata->local; + struct ieee80211_supported_band *sband; + enum nl80211_chan_width width = NL80211_CHAN_WIDTH_20; + struct ieee80211_chanctx_conf *chanctx_conf; + enum ieee80211_smps_mode smps_mode; + u16 orig_capab = *capab; + size_t offset = 0; + int present_elems_len = 0; + u8 *pos; + int i; + +#define ADD_PRESENT_ELEM(id) do { \ + /* need a last for termination - we use 0 == SSID */ \ + if (!WARN_ON(present_elems_len >= PRESENT_ELEMS_MAX - 1)) \ + present_elems[present_elems_len++] = (id); \ +} while (0) +#define ADD_PRESENT_EXT_ELEM(id) ADD_PRESENT_ELEM(PRESENT_ELEM_EXT_OFFS | (id)) + + if (link) + smps_mode = link->smps_mode; + else if (sdata->u.mgd.powersave) + smps_mode = IEEE80211_SMPS_DYNAMIC; + else + smps_mode = IEEE80211_SMPS_OFF; + + if (link) { + /* + * 5/10 MHz scenarios are only viable without MLO, in which + * case this pointer should be used ... All of this is a bit + * unclear though, not sure this even works at all. + */ + rcu_read_lock(); + chanctx_conf = rcu_dereference(link->conf->chanctx_conf); + if (chanctx_conf) + width = chanctx_conf->def.width; + rcu_read_unlock(); + } + + sband = local->hw.wiphy->bands[chan->band]; + iftd = ieee80211_get_sband_iftype_data(sband, iftype); + + if (sband->band == NL80211_BAND_2GHZ) { + *capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME; + *capab |= WLAN_CAPABILITY_SHORT_PREAMBLE; + } + + if ((cbss->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) && + ieee80211_hw_check(&local->hw, SPECTRUM_MGMT)) + *capab |= WLAN_CAPABILITY_SPECTRUM_MGMT; + + if (sband->band != NL80211_BAND_S1GHZ) + ieee80211_assoc_add_rates(skb, width, sband, assoc_data); + + if (*capab & WLAN_CAPABILITY_SPECTRUM_MGMT || + *capab & WLAN_CAPABILITY_RADIO_MEASURE) { + struct cfg80211_chan_def chandef = { + .width = width, + .chan = chan, + }; + + pos = skb_put(skb, 4); + *pos++ = WLAN_EID_PWR_CAPABILITY; + *pos++ = 2; + *pos++ = 0; /* min tx power */ + /* max tx power */ + *pos++ = ieee80211_chandef_max_power(&chandef); + ADD_PRESENT_ELEM(WLAN_EID_PWR_CAPABILITY); + } + + /* + * Per spec, we shouldn't include the list of channels if we advertise + * support for extended channel switching, but we've always done that; + * (for now?) apply this restriction only on the (new) 6 GHz band. + */ + if (*capab & WLAN_CAPABILITY_SPECTRUM_MGMT && + (sband->band != NL80211_BAND_6GHZ || + !ext_capa || ext_capa->datalen < 1 || + !(ext_capa->data[0] & WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING))) { + /* TODO: get this in reg domain format */ + pos = skb_put(skb, 2 * sband->n_channels + 2); + *pos++ = WLAN_EID_SUPPORTED_CHANNELS; + *pos++ = 2 * sband->n_channels; + for (i = 0; i < sband->n_channels; i++) { + int cf = sband->channels[i].center_freq; + + *pos++ = ieee80211_frequency_to_channel(cf); + *pos++ = 1; /* one channel in the subband*/ + } + ADD_PRESENT_ELEM(WLAN_EID_SUPPORTED_CHANNELS); + } + + /* if present, add any custom IEs that go before HT */ + offset = ieee80211_add_before_ht_elems(skb, extra_elems, + extra_elems_len, + offset); + + if (sband->band != NL80211_BAND_6GHZ && + !(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_HT)) { + ieee80211_add_ht_ie(sdata, skb, + assoc_data->link[link_id].ap_ht_param, + sband, chan, smps_mode, + assoc_data->link[link_id].conn_flags); + ADD_PRESENT_ELEM(WLAN_EID_HT_CAPABILITY); + } + + /* if present, add any custom IEs that go before VHT */ + offset = ieee80211_add_before_vht_elems(skb, extra_elems, + extra_elems_len, + offset); + + if (sband->band != NL80211_BAND_6GHZ && + !(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_VHT)) { + bool mu_mimo_owner = + ieee80211_add_vht_ie(sdata, skb, sband, + &assoc_data->link[link_id].ap_vht_cap, + assoc_data->link[link_id].conn_flags); + + if (link) + link->conf->mu_mimo_owner = mu_mimo_owner; + ADD_PRESENT_ELEM(WLAN_EID_VHT_CAPABILITY); + } + + /* + * If AP doesn't support HT, mark HE and EHT as disabled. + * If on the 5GHz band, make sure it supports VHT. + */ + if (assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_HT || + (sband->band == NL80211_BAND_5GHZ && + assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_VHT)) + assoc_data->link[link_id].conn_flags |= + IEEE80211_CONN_DISABLE_HE | + IEEE80211_CONN_DISABLE_EHT; + + /* if present, add any custom IEs that go before HE */ + offset = ieee80211_add_before_he_elems(skb, extra_elems, + extra_elems_len, + offset); + + if (!(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_HE)) { + ieee80211_add_he_ie(sdata, skb, sband, smps_mode, + assoc_data->link[link_id].conn_flags); + ADD_PRESENT_EXT_ELEM(WLAN_EID_EXT_HE_CAPABILITY); + } + + /* + * careful - need to know about all the present elems before + * calling ieee80211_assoc_add_ml_elem(), so add this one if + * we're going to put it after the ML element + */ + if (!(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_EHT)) + ADD_PRESENT_EXT_ELEM(WLAN_EID_EXT_EHT_CAPABILITY); + + if (link_id == assoc_data->assoc_link_id) + ieee80211_assoc_add_ml_elem(sdata, skb, orig_capab, ext_capa, + present_elems); + + /* crash if somebody gets it wrong */ + present_elems = NULL; + + if (!(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_EHT)) + ieee80211_add_eht_ie(sdata, skb, sband); + + if (sband->band == NL80211_BAND_S1GHZ) { + ieee80211_add_aid_request_ie(sdata, skb); + ieee80211_add_s1g_capab_ie(sdata, &sband->s1g_cap, skb); + } + + if (iftd && iftd->vendor_elems.data && iftd->vendor_elems.len) + skb_put_data(skb, iftd->vendor_elems.data, iftd->vendor_elems.len); + + if (link) + link->u.mgd.conn_flags = assoc_data->link[link_id].conn_flags; + + return offset; +} + +static void ieee80211_add_non_inheritance_elem(struct sk_buff *skb, + const u16 *outer, + const u16 *inner) +{ + unsigned int skb_len = skb->len; + bool at_extension = false; + bool added = false; + int i, j; + u8 *len, *list_len = NULL; + + skb_put_u8(skb, WLAN_EID_EXTENSION); + len = skb_put(skb, 1); + skb_put_u8(skb, WLAN_EID_EXT_NON_INHERITANCE); + + for (i = 0; i < PRESENT_ELEMS_MAX && outer[i]; i++) { + u16 elem = outer[i]; + bool have_inner = false; + + /* should at least be sorted in the sense of normal -> ext */ + WARN_ON(at_extension && elem < PRESENT_ELEM_EXT_OFFS); + + /* switch to extension list */ + if (!at_extension && elem >= PRESENT_ELEM_EXT_OFFS) { + at_extension = true; + if (!list_len) + skb_put_u8(skb, 0); + list_len = NULL; + } + + for (j = 0; j < PRESENT_ELEMS_MAX && inner[j]; j++) { + if (elem == inner[j]) { + have_inner = true; + break; + } + } + + if (have_inner) + continue; + + if (!list_len) { + list_len = skb_put(skb, 1); + *list_len = 0; + } + *list_len += 1; + skb_put_u8(skb, (u8)elem); + added = true; + } + + /* if we added a list but no extension list, make a zero-len one */ + if (added && (!at_extension || !list_len)) + skb_put_u8(skb, 0); + + /* if nothing added remove extension element completely */ + if (!added) + skb_trim(skb, skb_len); + else + *len = skb->len - skb_len - 2; +} + +static void ieee80211_assoc_add_ml_elem(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb, u16 capab, + const struct element *ext_capa, + const u16 *outer_present_elems) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; + struct ieee80211_multi_link_elem *ml_elem; + struct ieee80211_mle_basic_common_info *common; + const struct wiphy_iftype_ext_capab *ift_ext_capa; + __le16 eml_capa = 0, mld_capa_ops = 0; + unsigned int link_id; + u8 *ml_elem_len; + void *capab_pos; + + if (!sdata->vif.valid_links) + return; + + ift_ext_capa = cfg80211_get_iftype_ext_capa(local->hw.wiphy, + ieee80211_vif_type_p2p(&sdata->vif)); + if (ift_ext_capa) { + eml_capa = cpu_to_le16(ift_ext_capa->eml_capabilities); + mld_capa_ops = cpu_to_le16(ift_ext_capa->mld_capa_and_ops); + } + + skb_put_u8(skb, WLAN_EID_EXTENSION); + ml_elem_len = skb_put(skb, 1); + skb_put_u8(skb, WLAN_EID_EXT_EHT_MULTI_LINK); + ml_elem = skb_put(skb, sizeof(*ml_elem)); + ml_elem->control = + cpu_to_le16(IEEE80211_ML_CONTROL_TYPE_BASIC | + IEEE80211_MLC_BASIC_PRES_MLD_CAPA_OP); + common = skb_put(skb, sizeof(*common)); + common->len = sizeof(*common) + + 2; /* MLD capa/ops */ + memcpy(common->mld_mac_addr, sdata->vif.addr, ETH_ALEN); + + /* add EML_CAPA only if needed, see Draft P802.11be_D2.1, 35.3.17 */ + if (eml_capa & + cpu_to_le16((IEEE80211_EML_CAP_EMLSR_SUPP | + IEEE80211_EML_CAP_EMLMR_SUPPORT))) { + common->len += 2; /* EML capabilities */ + ml_elem->control |= + cpu_to_le16(IEEE80211_MLC_BASIC_PRES_EML_CAPA); + skb_put_data(skb, &eml_capa, sizeof(eml_capa)); + } + /* need indication from userspace to support this */ + mld_capa_ops &= ~cpu_to_le16(IEEE80211_MLD_CAP_OP_TID_TO_LINK_MAP_NEG_SUPP); + skb_put_data(skb, &mld_capa_ops, sizeof(mld_capa_ops)); + + for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) { + u16 link_present_elems[PRESENT_ELEMS_MAX] = {}; + const u8 *extra_elems; + size_t extra_elems_len; + size_t extra_used; + u8 *subelem_len = NULL; + __le16 ctrl; + + if (!assoc_data->link[link_id].bss || + link_id == assoc_data->assoc_link_id) + continue; + + extra_elems = assoc_data->link[link_id].elems; + extra_elems_len = assoc_data->link[link_id].elems_len; + + skb_put_u8(skb, IEEE80211_MLE_SUBELEM_PER_STA_PROFILE); + subelem_len = skb_put(skb, 1); + + ctrl = cpu_to_le16(link_id | + IEEE80211_MLE_STA_CONTROL_COMPLETE_PROFILE | + IEEE80211_MLE_STA_CONTROL_STA_MAC_ADDR_PRESENT); + skb_put_data(skb, &ctrl, sizeof(ctrl)); + skb_put_u8(skb, 1 + ETH_ALEN); /* STA Info Length */ + skb_put_data(skb, assoc_data->link[link_id].addr, + ETH_ALEN); + /* + * Now add the contents of the (re)association request, + * but the "listen interval" and "current AP address" + * (if applicable) are skipped. So we only have + * the capability field (remember the position and fill + * later), followed by the elements added below by + * calling ieee80211_assoc_link_elems(). + */ + capab_pos = skb_put(skb, 2); + + extra_used = ieee80211_assoc_link_elems(sdata, skb, &capab, + ext_capa, + extra_elems, + extra_elems_len, + link_id, NULL, + link_present_elems); + if (extra_elems) + skb_put_data(skb, extra_elems + extra_used, + extra_elems_len - extra_used); + + put_unaligned_le16(capab, capab_pos); + + ieee80211_add_non_inheritance_elem(skb, outer_present_elems, + link_present_elems); + + ieee80211_fragment_element(skb, subelem_len); + } + + ieee80211_fragment_element(skb, ml_elem_len); +} + +static int ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; + struct ieee80211_link_data *link; + struct sk_buff *skb; + struct ieee80211_mgmt *mgmt; + u8 *pos, qos_info, *ie_start; + size_t offset, noffset; + u16 capab = WLAN_CAPABILITY_ESS, link_capab; + __le16 listen_int; + struct element *ext_capa = NULL; + enum nl80211_iftype iftype = ieee80211_vif_type_p2p(&sdata->vif); + struct ieee80211_prep_tx_info info = {}; + unsigned int link_id, n_links = 0; + u16 present_elems[PRESENT_ELEMS_MAX] = {}; + void *capab_pos; + size_t size; + int ret; + + /* we know it's writable, cast away the const */ + if (assoc_data->ie_len) + ext_capa = (void *)cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY, + assoc_data->ie, + assoc_data->ie_len); + + sdata_assert_lock(sdata); + + size = local->hw.extra_tx_headroom + + sizeof(*mgmt) + /* bit too much but doesn't matter */ + 2 + assoc_data->ssid_len + /* SSID */ + assoc_data->ie_len + /* extra IEs */ + (assoc_data->fils_kek_len ? 16 /* AES-SIV */ : 0) + + 9; /* WMM */ + + for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) { + struct cfg80211_bss *cbss = assoc_data->link[link_id].bss; + const struct ieee80211_sband_iftype_data *iftd; + struct ieee80211_supported_band *sband; + + if (!cbss) + continue; + + sband = local->hw.wiphy->bands[cbss->channel->band]; + + n_links++; + /* add STA profile elements length */ + size += assoc_data->link[link_id].elems_len; + /* and supported rates length */ + size += 4 + sband->n_bitrates; + /* supported channels */ + size += 2 + 2 * sband->n_channels; + + iftd = ieee80211_get_sband_iftype_data(sband, iftype); + if (iftd) + size += iftd->vendor_elems.len; + + /* power capability */ + size += 4; + + /* HT, VHT, HE, EHT */ + size += 2 + sizeof(struct ieee80211_ht_cap); + size += 2 + sizeof(struct ieee80211_vht_cap); + size += 2 + 1 + sizeof(struct ieee80211_he_cap_elem) + + sizeof(struct ieee80211_he_mcs_nss_supp) + + IEEE80211_HE_PPE_THRES_MAX_LEN; + + if (sband->band == NL80211_BAND_6GHZ) + size += 2 + 1 + sizeof(struct ieee80211_he_6ghz_capa); + + size += 2 + 1 + sizeof(struct ieee80211_eht_cap_elem) + + sizeof(struct ieee80211_eht_mcs_nss_supp) + + IEEE80211_EHT_PPE_THRES_MAX_LEN; + + /* non-inheritance element */ + size += 2 + 2 + PRESENT_ELEMS_MAX; + + /* should be the same across all BSSes */ + if (cbss->capability & WLAN_CAPABILITY_PRIVACY) + capab |= WLAN_CAPABILITY_PRIVACY; + } + + if (sdata->vif.valid_links) { + /* consider the multi-link element with STA profile */ + size += sizeof(struct ieee80211_multi_link_elem); + /* max common info field in basic multi-link element */ + size += sizeof(struct ieee80211_mle_basic_common_info) + + 2 + /* capa & op */ + 2; /* EML capa */ + + /* + * The capability elements were already considered above; + * note this over-estimates a bit because there's no + * STA profile for the assoc link. + */ + size += (n_links - 1) * + (1 + 1 + /* subelement ID/length */ + 2 + /* STA control */ + 1 + ETH_ALEN + 2 /* STA Info field */); + } + + link = sdata_dereference(sdata->link[assoc_data->assoc_link_id], sdata); + if (WARN_ON(!link)) + return -EINVAL; + + if (WARN_ON(!assoc_data->link[assoc_data->assoc_link_id].bss)) + return -EINVAL; + + skb = alloc_skb(size, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + skb_reserve(skb, local->hw.extra_tx_headroom); + + if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM) + capab |= WLAN_CAPABILITY_RADIO_MEASURE; + + /* Set MBSSID support for HE AP if needed */ + if (ieee80211_hw_check(&local->hw, SUPPORTS_ONLY_HE_MULTI_BSSID) && + !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) && + ext_capa && ext_capa->datalen >= 3) + ext_capa->data[2] |= WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT; + + mgmt = skb_put_zero(skb, 24); + memcpy(mgmt->da, sdata->vif.cfg.ap_addr, ETH_ALEN); + memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); + memcpy(mgmt->bssid, sdata->vif.cfg.ap_addr, ETH_ALEN); + + listen_int = cpu_to_le16(assoc_data->s1g ? + ieee80211_encode_usf(local->hw.conf.listen_interval) : + local->hw.conf.listen_interval); + if (!is_zero_ether_addr(assoc_data->prev_ap_addr)) { + skb_put(skb, 10); + mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_REASSOC_REQ); + capab_pos = &mgmt->u.reassoc_req.capab_info; + mgmt->u.reassoc_req.listen_interval = listen_int; + memcpy(mgmt->u.reassoc_req.current_ap, + assoc_data->prev_ap_addr, ETH_ALEN); + info.subtype = IEEE80211_STYPE_REASSOC_REQ; + } else { + skb_put(skb, 4); + mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_ASSOC_REQ); + capab_pos = &mgmt->u.assoc_req.capab_info; + mgmt->u.assoc_req.listen_interval = listen_int; + info.subtype = IEEE80211_STYPE_ASSOC_REQ; + } + + /* SSID */ + pos = skb_put(skb, 2 + assoc_data->ssid_len); + ie_start = pos; + *pos++ = WLAN_EID_SSID; + *pos++ = assoc_data->ssid_len; + memcpy(pos, assoc_data->ssid, assoc_data->ssid_len); + + /* add the elements for the assoc (main) link */ + link_capab = capab; + offset = ieee80211_assoc_link_elems(sdata, skb, &link_capab, + ext_capa, + assoc_data->ie, + assoc_data->ie_len, + assoc_data->assoc_link_id, link, + present_elems); + put_unaligned_le16(link_capab, capab_pos); + + /* if present, add any custom non-vendor IEs */ + if (assoc_data->ie_len) { + noffset = ieee80211_ie_split_vendor(assoc_data->ie, + assoc_data->ie_len, + offset); + skb_put_data(skb, assoc_data->ie + offset, noffset - offset); + offset = noffset; + } + + if (assoc_data->wmm) { + if (assoc_data->uapsd) { + qos_info = ifmgd->uapsd_queues; + qos_info |= (ifmgd->uapsd_max_sp_len << + IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT); + } else { + qos_info = 0; + } + + pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info); + } + + /* add any remaining custom (i.e. vendor specific here) IEs */ + if (assoc_data->ie_len) { + noffset = assoc_data->ie_len; + skb_put_data(skb, assoc_data->ie + offset, noffset - offset); + } + + if (assoc_data->fils_kek_len) { + ret = fils_encrypt_assoc_req(skb, assoc_data); + if (ret < 0) { + dev_kfree_skb(skb); + return ret; + } + } + + pos = skb_tail_pointer(skb); + kfree(ifmgd->assoc_req_ies); + ifmgd->assoc_req_ies = kmemdup(ie_start, pos - ie_start, GFP_ATOMIC); + if (!ifmgd->assoc_req_ies) { + dev_kfree_skb(skb); + return -ENOMEM; + } + + ifmgd->assoc_req_ies_len = pos - ie_start; + + drv_mgd_prepare_tx(local, sdata, &info); + + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS | + IEEE80211_TX_INTFL_MLME_CONN_TX; + ieee80211_tx_skb(sdata, skb); + + return 0; +} + +void ieee80211_send_pspoll(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_pspoll *pspoll; + struct sk_buff *skb; + + skb = ieee80211_pspoll_get(&local->hw, &sdata->vif); + if (!skb) + return; + + pspoll = (struct ieee80211_pspoll *) skb->data; + pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); + + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + ieee80211_tx_skb(sdata, skb); +} + +void ieee80211_send_nullfunc(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata, + bool powersave) +{ + struct sk_buff *skb; + struct ieee80211_hdr_3addr *nullfunc; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + + skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif, -1, + !ieee80211_hw_check(&local->hw, + DOESNT_SUPPORT_QOS_NDP)); + if (!skb) + return; + + nullfunc = (struct ieee80211_hdr_3addr *) skb->data; + if (powersave) + nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); + + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | + IEEE80211_TX_INTFL_OFFCHAN_TX_OK; + + if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; + + if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE; + + ieee80211_tx_skb(sdata, skb); +} + +void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) +{ + struct sk_buff *skb; + struct ieee80211_hdr *nullfunc; + __le16 fc; + + if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) + return; + + skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30); + if (!skb) + return; + + skb_reserve(skb, local->hw.extra_tx_headroom); + + nullfunc = skb_put_zero(skb, 30); + fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC | + IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); + nullfunc->frame_control = fc; + memcpy(nullfunc->addr1, sdata->deflink.u.mgd.bssid, ETH_ALEN); + memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN); + memcpy(nullfunc->addr3, sdata->deflink.u.mgd.bssid, ETH_ALEN); + memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN); + + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE; + ieee80211_tx_skb(sdata, skb); +} + +/* spectrum management related things */ +static void ieee80211_chswitch_work(struct work_struct *work) +{ + struct ieee80211_link_data *link = + container_of(work, struct ieee80211_link_data, u.mgd.chswitch_work); + struct ieee80211_sub_if_data *sdata = link->sdata; + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + int ret; + + if (!ieee80211_sdata_running(sdata)) + return; + + sdata_lock(sdata); + mutex_lock(&local->mtx); + mutex_lock(&local->chanctx_mtx); + + if (!ifmgd->associated) + goto out; + + if (!link->conf->csa_active) + goto out; + + /* + * using reservation isn't immediate as it may be deferred until later + * with multi-vif. once reservation is complete it will re-schedule the + * work with no reserved_chanctx so verify chandef to check if it + * completed successfully + */ + + if (link->reserved_chanctx) { + /* + * with multi-vif csa driver may call ieee80211_csa_finish() + * many times while waiting for other interfaces to use their + * reservations + */ + if (link->reserved_ready) + goto out; + + ret = ieee80211_link_use_reserved_context(link); + if (ret) { + sdata_info(sdata, + "failed to use reserved channel context, disconnecting (err=%d)\n", + ret); + ieee80211_queue_work(&sdata->local->hw, + &ifmgd->csa_connection_drop_work); + goto out; + } + + goto out; + } + + if (!cfg80211_chandef_identical(&link->conf->chandef, + &link->csa_chandef)) { + sdata_info(sdata, + "failed to finalize channel switch, disconnecting\n"); + ieee80211_queue_work(&sdata->local->hw, + &ifmgd->csa_connection_drop_work); + goto out; + } + + link->u.mgd.csa_waiting_bcn = true; + + ieee80211_sta_reset_beacon_monitor(sdata); + ieee80211_sta_reset_conn_monitor(sdata); + +out: + mutex_unlock(&local->chanctx_mtx); + mutex_unlock(&local->mtx); + sdata_unlock(sdata); +} + +static void ieee80211_chswitch_post_beacon(struct ieee80211_link_data *link) +{ + struct ieee80211_sub_if_data *sdata = link->sdata; + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + int ret; + + sdata_assert_lock(sdata); + + WARN_ON(!link->conf->csa_active); + + if (link->csa_block_tx) { + ieee80211_wake_vif_queues(local, sdata, + IEEE80211_QUEUE_STOP_REASON_CSA); + link->csa_block_tx = false; + } + + link->conf->csa_active = false; + link->u.mgd.csa_waiting_bcn = false; + /* + * If the CSA IE is still present on the beacon after the switch, + * we need to consider it as a new CSA (possibly to self). + */ + link->u.mgd.beacon_crc_valid = false; + + ret = drv_post_channel_switch(sdata); + if (ret) { + sdata_info(sdata, + "driver post channel switch failed, disconnecting\n"); + ieee80211_queue_work(&local->hw, + &ifmgd->csa_connection_drop_work); + return; + } + + cfg80211_ch_switch_notify(sdata->dev, &link->reserved_chandef, 0); +} + +void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + + if (WARN_ON(sdata->vif.valid_links)) + success = false; + + trace_api_chswitch_done(sdata, success); + if (!success) { + sdata_info(sdata, + "driver channel switch failed, disconnecting\n"); + ieee80211_queue_work(&sdata->local->hw, + &ifmgd->csa_connection_drop_work); + } else { + ieee80211_queue_work(&sdata->local->hw, + &sdata->deflink.u.mgd.chswitch_work); + } +} +EXPORT_SYMBOL(ieee80211_chswitch_done); + +static void ieee80211_chswitch_timer(struct timer_list *t) +{ + struct ieee80211_link_data *link = + from_timer(link, t, u.mgd.chswitch_timer); + + ieee80211_queue_work(&link->sdata->local->hw, + &link->u.mgd.chswitch_work); +} + +static void +ieee80211_sta_abort_chanswitch(struct ieee80211_link_data *link) +{ + struct ieee80211_sub_if_data *sdata = link->sdata; + struct ieee80211_local *local = sdata->local; + + if (!local->ops->abort_channel_switch) + return; + + mutex_lock(&local->mtx); + + mutex_lock(&local->chanctx_mtx); + ieee80211_link_unreserve_chanctx(link); + mutex_unlock(&local->chanctx_mtx); + + if (link->csa_block_tx) + ieee80211_wake_vif_queues(local, sdata, + IEEE80211_QUEUE_STOP_REASON_CSA); + + link->csa_block_tx = false; + link->conf->csa_active = false; + + mutex_unlock(&local->mtx); + + drv_abort_channel_switch(sdata); +} + +static void +ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link, + u64 timestamp, u32 device_timestamp, + struct ieee802_11_elems *elems, + bool beacon) +{ + struct ieee80211_sub_if_data *sdata = link->sdata; + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct cfg80211_bss *cbss = link->u.mgd.bss; + struct ieee80211_chanctx_conf *conf; + struct ieee80211_chanctx *chanctx; + enum nl80211_band current_band; + struct ieee80211_csa_ie csa_ie; + struct ieee80211_channel_switch ch_switch; + struct ieee80211_bss *bss; + int res; + + sdata_assert_lock(sdata); + + if (!cbss) + return; + + if (local->scanning) + return; + + current_band = cbss->channel->band; + bss = (void *)cbss->priv; + res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band, + bss->vht_cap_info, + link->u.mgd.conn_flags, + link->u.mgd.bssid, &csa_ie); + + if (!res) { + ch_switch.timestamp = timestamp; + ch_switch.device_timestamp = device_timestamp; + ch_switch.block_tx = csa_ie.mode; + ch_switch.chandef = csa_ie.chandef; + ch_switch.count = csa_ie.count; + ch_switch.delay = csa_ie.max_switch_time; + } + + if (res < 0) + goto lock_and_drop_connection; + + if (beacon && link->conf->csa_active && + !link->u.mgd.csa_waiting_bcn) { + if (res) + ieee80211_sta_abort_chanswitch(link); + else + drv_channel_switch_rx_beacon(sdata, &ch_switch); + return; + } else if (link->conf->csa_active || res) { + /* disregard subsequent announcements if already processing */ + return; + } + + if (link->conf->chandef.chan->band != + csa_ie.chandef.chan->band) { + sdata_info(sdata, + "AP %pM switches to different band (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n", + link->u.mgd.bssid, + csa_ie.chandef.chan->center_freq, + csa_ie.chandef.width, csa_ie.chandef.center_freq1, + csa_ie.chandef.center_freq2); + goto lock_and_drop_connection; + } + + if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef, + IEEE80211_CHAN_DISABLED)) { + sdata_info(sdata, + "AP %pM switches to unsupported channel " + "(%d.%03d MHz, width:%d, CF1/2: %d.%03d/%d MHz), " + "disconnecting\n", + link->u.mgd.bssid, + csa_ie.chandef.chan->center_freq, + csa_ie.chandef.chan->freq_offset, + csa_ie.chandef.width, csa_ie.chandef.center_freq1, + csa_ie.chandef.freq1_offset, + csa_ie.chandef.center_freq2); + goto lock_and_drop_connection; + } + + if (cfg80211_chandef_identical(&csa_ie.chandef, + &link->conf->chandef) && + (!csa_ie.mode || !beacon)) { + if (link->u.mgd.csa_ignored_same_chan) + return; + sdata_info(sdata, + "AP %pM tries to chanswitch to same channel, ignore\n", + link->u.mgd.bssid); + link->u.mgd.csa_ignored_same_chan = true; + return; + } + + /* + * Drop all TDLS peers - either we disconnect or move to a different + * channel from this point on. There's no telling what our peer will do. + * The TDLS WIDER_BW scenario is also problematic, as peers might now + * have an incompatible wider chandef. + */ + ieee80211_teardown_tdls_peers(sdata); + + mutex_lock(&local->mtx); + mutex_lock(&local->chanctx_mtx); + conf = rcu_dereference_protected(link->conf->chanctx_conf, + lockdep_is_held(&local->chanctx_mtx)); + if (!conf) { + sdata_info(sdata, + "no channel context assigned to vif?, disconnecting\n"); + goto drop_connection; + } + + chanctx = container_of(conf, struct ieee80211_chanctx, conf); + + if (local->use_chanctx && + !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) { + sdata_info(sdata, + "driver doesn't support chan-switch with channel contexts\n"); + goto drop_connection; + } + + if (drv_pre_channel_switch(sdata, &ch_switch)) { + sdata_info(sdata, + "preparing for channel switch failed, disconnecting\n"); + goto drop_connection; + } + + res = ieee80211_link_reserve_chanctx(link, &csa_ie.chandef, + chanctx->mode, false); + if (res) { + sdata_info(sdata, + "failed to reserve channel context for channel switch, disconnecting (err=%d)\n", + res); + goto drop_connection; + } + mutex_unlock(&local->chanctx_mtx); + + link->conf->csa_active = true; + link->csa_chandef = csa_ie.chandef; + link->csa_block_tx = csa_ie.mode; + link->u.mgd.csa_ignored_same_chan = false; + link->u.mgd.beacon_crc_valid = false; + + if (link->csa_block_tx) + ieee80211_stop_vif_queues(local, sdata, + IEEE80211_QUEUE_STOP_REASON_CSA); + mutex_unlock(&local->mtx); + + cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef, 0, + csa_ie.count, csa_ie.mode); + + if (local->ops->channel_switch) { + /* use driver's channel switch callback */ + drv_channel_switch(local, sdata, &ch_switch); + return; + } + + /* channel switch handled in software */ + if (csa_ie.count <= 1) + ieee80211_queue_work(&local->hw, &link->u.mgd.chswitch_work); + else + mod_timer(&link->u.mgd.chswitch_timer, + TU_TO_EXP_TIME((csa_ie.count - 1) * + cbss->beacon_interval)); + return; + lock_and_drop_connection: + mutex_lock(&local->mtx); + mutex_lock(&local->chanctx_mtx); + drop_connection: + /* + * This is just so that the disconnect flow will know that + * we were trying to switch channel and failed. In case the + * mode is 1 (we are not allowed to Tx), we will know not to + * send a deauthentication frame. Those two fields will be + * reset when the disconnection worker runs. + */ + link->conf->csa_active = true; + link->csa_block_tx = csa_ie.mode; + + ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work); + mutex_unlock(&local->chanctx_mtx); + mutex_unlock(&local->mtx); +} + +static bool +ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata, + struct ieee80211_channel *channel, + const u8 *country_ie, u8 country_ie_len, + const u8 *pwr_constr_elem, + int *chan_pwr, int *pwr_reduction) +{ + struct ieee80211_country_ie_triplet *triplet; + int chan = ieee80211_frequency_to_channel(channel->center_freq); + int i, chan_increment; + bool have_chan_pwr = false; + + /* Invalid IE */ + if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN) + return false; + + triplet = (void *)(country_ie + 3); + country_ie_len -= 3; + + switch (channel->band) { + default: + WARN_ON_ONCE(1); + fallthrough; + case NL80211_BAND_2GHZ: + case NL80211_BAND_60GHZ: + case NL80211_BAND_LC: + chan_increment = 1; + break; + case NL80211_BAND_5GHZ: + chan_increment = 4; + break; + case NL80211_BAND_6GHZ: + /* + * In the 6 GHz band, the "maximum transmit power level" + * field in the triplets is reserved, and thus will be + * zero and we shouldn't use it to control TX power. + * The actual TX power will be given in the transmit + * power envelope element instead. + */ + return false; + } + + /* find channel */ + while (country_ie_len >= 3) { + u8 first_channel = triplet->chans.first_channel; + + if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID) + goto next; + + for (i = 0; i < triplet->chans.num_channels; i++) { + if (first_channel + i * chan_increment == chan) { + have_chan_pwr = true; + *chan_pwr = triplet->chans.max_power; + break; + } + } + if (have_chan_pwr) + break; + + next: + triplet++; + country_ie_len -= 3; + } + + if (have_chan_pwr && pwr_constr_elem) + *pwr_reduction = *pwr_constr_elem; + else + *pwr_reduction = 0; + + return have_chan_pwr; +} + +static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata, + struct ieee80211_channel *channel, + const u8 *cisco_dtpc_ie, + int *pwr_level) +{ + /* From practical testing, the first data byte of the DTPC element + * seems to contain the requested dBm level, and the CLI on Cisco + * APs clearly state the range is -127 to 127 dBm, which indicates + * a signed byte, although it seemingly never actually goes negative. + * The other byte seems to always be zero. + */ + *pwr_level = (__s8)cisco_dtpc_ie[4]; +} + +static u32 ieee80211_handle_pwr_constr(struct ieee80211_link_data *link, + struct ieee80211_channel *channel, + struct ieee80211_mgmt *mgmt, + const u8 *country_ie, u8 country_ie_len, + const u8 *pwr_constr_ie, + const u8 *cisco_dtpc_ie) +{ + struct ieee80211_sub_if_data *sdata = link->sdata; + bool has_80211h_pwr = false, has_cisco_pwr = false; + int chan_pwr = 0, pwr_reduction_80211h = 0; + int pwr_level_cisco, pwr_level_80211h; + int new_ap_level; + __le16 capab = mgmt->u.probe_resp.capab_info; + + if (ieee80211_is_s1g_beacon(mgmt->frame_control)) + return 0; /* TODO */ + + if (country_ie && + (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) || + capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) { + has_80211h_pwr = ieee80211_find_80211h_pwr_constr( + sdata, channel, country_ie, country_ie_len, + pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h); + pwr_level_80211h = + max_t(int, 0, chan_pwr - pwr_reduction_80211h); + } + + if (cisco_dtpc_ie) { + ieee80211_find_cisco_dtpc( + sdata, channel, cisco_dtpc_ie, &pwr_level_cisco); + has_cisco_pwr = true; + } + + if (!has_80211h_pwr && !has_cisco_pwr) + return 0; + + /* If we have both 802.11h and Cisco DTPC, apply both limits + * by picking the smallest of the two power levels advertised. + */ + if (has_80211h_pwr && + (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) { + new_ap_level = pwr_level_80211h; + + if (link->ap_power_level == new_ap_level) + return 0; + + sdata_dbg(sdata, + "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n", + pwr_level_80211h, chan_pwr, pwr_reduction_80211h, + link->u.mgd.bssid); + } else { /* has_cisco_pwr is always true here. */ + new_ap_level = pwr_level_cisco; + + if (link->ap_power_level == new_ap_level) + return 0; + + sdata_dbg(sdata, + "Limiting TX power to %d dBm as advertised by %pM\n", + pwr_level_cisco, link->u.mgd.bssid); + } + + link->ap_power_level = new_ap_level; + if (__ieee80211_recalc_txpower(sdata)) + return BSS_CHANGED_TXPOWER; + return 0; +} + +/* powersave */ +static void ieee80211_enable_ps(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_conf *conf = &local->hw.conf; + + /* + * If we are scanning right now then the parameters will + * take effect when scan finishes. + */ + if (local->scanning) + return; + + if (conf->dynamic_ps_timeout > 0 && + !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) { + mod_timer(&local->dynamic_ps_timer, jiffies + + msecs_to_jiffies(conf->dynamic_ps_timeout)); + } else { + if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) + ieee80211_send_nullfunc(local, sdata, true); + + if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && + ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) + return; + + conf->flags |= IEEE80211_CONF_PS; + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); + } +} + +static void ieee80211_change_ps(struct ieee80211_local *local) +{ + struct ieee80211_conf *conf = &local->hw.conf; + + if (local->ps_sdata) { + ieee80211_enable_ps(local, local->ps_sdata); + } else if (conf->flags & IEEE80211_CONF_PS) { + conf->flags &= ~IEEE80211_CONF_PS; + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); + del_timer_sync(&local->dynamic_ps_timer); + cancel_work_sync(&local->dynamic_ps_enable_work); + } +} + +static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *mgd = &sdata->u.mgd; + struct sta_info *sta = NULL; + bool authorized = false; + + if (!mgd->powersave) + return false; + + if (mgd->broken_ap) + return false; + + if (!mgd->associated) + return false; + + if (mgd->flags & IEEE80211_STA_CONNECTION_POLL) + return false; + + if (!(local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_MLO) && + !sdata->deflink.u.mgd.have_beacon) + return false; + + rcu_read_lock(); + sta = sta_info_get(sdata, sdata->vif.cfg.ap_addr); + if (sta) + authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); + rcu_read_unlock(); + + return authorized; +} + +/* need to hold RTNL or interface lock */ +void ieee80211_recalc_ps(struct ieee80211_local *local) +{ + struct ieee80211_sub_if_data *sdata, *found = NULL; + int count = 0; + int timeout; + + if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS) || + ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) { + local->ps_sdata = NULL; + return; + } + + list_for_each_entry(sdata, &local->interfaces, list) { + if (!ieee80211_sdata_running(sdata)) + continue; + if (sdata->vif.type == NL80211_IFTYPE_AP) { + /* If an AP vif is found, then disable PS + * by setting the count to zero thereby setting + * ps_sdata to NULL. + */ + count = 0; + break; + } + if (sdata->vif.type != NL80211_IFTYPE_STATION) + continue; + found = sdata; + count++; + } + + if (count == 1 && ieee80211_powersave_allowed(found)) { + u8 dtimper = found->deflink.u.mgd.dtim_period; + + timeout = local->dynamic_ps_forced_timeout; + if (timeout < 0) + timeout = 100; + local->hw.conf.dynamic_ps_timeout = timeout; + + /* If the TIM IE is invalid, pretend the value is 1 */ + if (!dtimper) + dtimper = 1; + + local->hw.conf.ps_dtim_period = dtimper; + local->ps_sdata = found; + } else { + local->ps_sdata = NULL; + } + + ieee80211_change_ps(local); +} + +void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata) +{ + bool ps_allowed = ieee80211_powersave_allowed(sdata); + + if (sdata->vif.cfg.ps != ps_allowed) { + sdata->vif.cfg.ps = ps_allowed; + ieee80211_vif_cfg_change_notify(sdata, BSS_CHANGED_PS); + } +} + +void ieee80211_dynamic_ps_disable_work(struct work_struct *work) +{ + struct ieee80211_local *local = + container_of(work, struct ieee80211_local, + dynamic_ps_disable_work); + + if (local->hw.conf.flags & IEEE80211_CONF_PS) { + local->hw.conf.flags &= ~IEEE80211_CONF_PS; + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); + } + + ieee80211_wake_queues_by_reason(&local->hw, + IEEE80211_MAX_QUEUE_MAP, + IEEE80211_QUEUE_STOP_REASON_PS, + false); +} + +void ieee80211_dynamic_ps_enable_work(struct work_struct *work) +{ + struct ieee80211_local *local = + container_of(work, struct ieee80211_local, + dynamic_ps_enable_work); + struct ieee80211_sub_if_data *sdata = local->ps_sdata; + struct ieee80211_if_managed *ifmgd; + unsigned long flags; + int q; + + /* can only happen when PS was just disabled anyway */ + if (!sdata) + return; + + ifmgd = &sdata->u.mgd; + + if (local->hw.conf.flags & IEEE80211_CONF_PS) + return; + + if (local->hw.conf.dynamic_ps_timeout > 0) { + /* don't enter PS if TX frames are pending */ + if (drv_tx_frames_pending(local)) { + mod_timer(&local->dynamic_ps_timer, jiffies + + msecs_to_jiffies( + local->hw.conf.dynamic_ps_timeout)); + return; + } + + /* + * transmission can be stopped by others which leads to + * dynamic_ps_timer expiry. Postpone the ps timer if it + * is not the actual idle state. + */ + spin_lock_irqsave(&local->queue_stop_reason_lock, flags); + for (q = 0; q < local->hw.queues; q++) { + if (local->queue_stop_reasons[q]) { + spin_unlock_irqrestore(&local->queue_stop_reason_lock, + flags); + mod_timer(&local->dynamic_ps_timer, jiffies + + msecs_to_jiffies( + local->hw.conf.dynamic_ps_timeout)); + return; + } + } + spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); + } + + if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && + !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) { + if (drv_tx_frames_pending(local)) { + mod_timer(&local->dynamic_ps_timer, jiffies + + msecs_to_jiffies( + local->hw.conf.dynamic_ps_timeout)); + } else { + ieee80211_send_nullfunc(local, sdata, true); + /* Flush to get the tx status of nullfunc frame */ + ieee80211_flush_queues(local, sdata, false); + } + } + + if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) && + ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) || + (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) { + ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED; + local->hw.conf.flags |= IEEE80211_CONF_PS; + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); + } +} + +void ieee80211_dynamic_ps_timer(struct timer_list *t) +{ + struct ieee80211_local *local = from_timer(local, t, dynamic_ps_timer); + + ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work); +} + +void ieee80211_dfs_cac_timer_work(struct work_struct *work) +{ + struct delayed_work *delayed_work = to_delayed_work(work); + struct ieee80211_link_data *link = + container_of(delayed_work, struct ieee80211_link_data, + dfs_cac_timer_work); + struct cfg80211_chan_def chandef = link->conf->chandef; + struct ieee80211_sub_if_data *sdata = link->sdata; + + mutex_lock(&sdata->local->mtx); + if (sdata->wdev.cac_started) { + ieee80211_link_release_channel(link); + cfg80211_cac_event(sdata->dev, &chandef, + NL80211_RADAR_CAC_FINISHED, + GFP_KERNEL); + } + mutex_unlock(&sdata->local->mtx); +} + +static bool +__ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + bool ret = false; + int ac; + + if (local->hw.queues < IEEE80211_NUM_ACS) + return false; + + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { + struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac]; + int non_acm_ac; + unsigned long now = jiffies; + + if (tx_tspec->action == TX_TSPEC_ACTION_NONE && + tx_tspec->admitted_time && + time_after(now, tx_tspec->time_slice_start + HZ)) { + tx_tspec->consumed_tx_time = 0; + tx_tspec->time_slice_start = now; + + if (tx_tspec->downgraded) + tx_tspec->action = + TX_TSPEC_ACTION_STOP_DOWNGRADE; + } + + switch (tx_tspec->action) { + case TX_TSPEC_ACTION_STOP_DOWNGRADE: + /* take the original parameters */ + if (drv_conf_tx(local, &sdata->deflink, ac, + &sdata->deflink.tx_conf[ac])) + link_err(&sdata->deflink, + "failed to set TX queue parameters for queue %d\n", + ac); + tx_tspec->action = TX_TSPEC_ACTION_NONE; + tx_tspec->downgraded = false; + ret = true; + break; + case TX_TSPEC_ACTION_DOWNGRADE: + if (time_after(now, tx_tspec->time_slice_start + HZ)) { + tx_tspec->action = TX_TSPEC_ACTION_NONE; + ret = true; + break; + } + /* downgrade next lower non-ACM AC */ + for (non_acm_ac = ac + 1; + non_acm_ac < IEEE80211_NUM_ACS; + non_acm_ac++) + if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac))) + break; + /* Usually the loop will result in using BK even if it + * requires admission control, but such a configuration + * makes no sense and we have to transmit somehow - the + * AC selection does the same thing. + * If we started out trying to downgrade from BK, then + * the extra condition here might be needed. + */ + if (non_acm_ac >= IEEE80211_NUM_ACS) + non_acm_ac = IEEE80211_AC_BK; + if (drv_conf_tx(local, &sdata->deflink, ac, + &sdata->deflink.tx_conf[non_acm_ac])) + link_err(&sdata->deflink, + "failed to set TX queue parameters for queue %d\n", + ac); + tx_tspec->action = TX_TSPEC_ACTION_NONE; + ret = true; + schedule_delayed_work(&ifmgd->tx_tspec_wk, + tx_tspec->time_slice_start + HZ - now + 1); + break; + case TX_TSPEC_ACTION_NONE: + /* nothing now */ + break; + } + } + + return ret; +} + +void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata) +{ + if (__ieee80211_sta_handle_tspec_ac_params(sdata)) + ieee80211_link_info_change_notify(sdata, &sdata->deflink, + BSS_CHANGED_QOS); +} + +static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work) +{ + struct ieee80211_sub_if_data *sdata; + + sdata = container_of(work, struct ieee80211_sub_if_data, + u.mgd.tx_tspec_wk.work); + ieee80211_sta_handle_tspec_ac_params(sdata); +} + +void ieee80211_mgd_set_link_qos_params(struct ieee80211_link_data *link) +{ + struct ieee80211_sub_if_data *sdata = link->sdata; + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_tx_queue_params *params = link->tx_conf; + u8 ac; + + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { + mlme_dbg(sdata, + "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n", + ac, params[ac].acm, + params[ac].aifs, params[ac].cw_min, params[ac].cw_max, + params[ac].txop, params[ac].uapsd, + ifmgd->tx_tspec[ac].downgraded); + if (!ifmgd->tx_tspec[ac].downgraded && + drv_conf_tx(local, link, ac, ¶ms[ac])) + link_err(link, + "failed to set TX queue parameters for AC %d\n", + ac); + } +} + +/* MLME */ +static bool +ieee80211_sta_wmm_params(struct ieee80211_local *local, + struct ieee80211_link_data *link, + const u8 *wmm_param, size_t wmm_param_len, + const struct ieee80211_mu_edca_param_set *mu_edca) +{ + struct ieee80211_sub_if_data *sdata = link->sdata; + struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS]; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + size_t left; + int count, mu_edca_count, ac; + const u8 *pos; + u8 uapsd_queues = 0; + + if (!local->ops->conf_tx) + return false; + + if (local->hw.queues < IEEE80211_NUM_ACS) + return false; + + if (!wmm_param) + return false; + + if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1) + return false; + + if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED) + uapsd_queues = ifmgd->uapsd_queues; + + count = wmm_param[6] & 0x0f; + /* -1 is the initial value of ifmgd->mu_edca_last_param_set. + * if mu_edca was preset before and now it disappeared tell + * the driver about it. + */ + mu_edca_count = mu_edca ? mu_edca->mu_qos_info & 0x0f : -1; + if (count == link->u.mgd.wmm_last_param_set && + mu_edca_count == link->u.mgd.mu_edca_last_param_set) + return false; + link->u.mgd.wmm_last_param_set = count; + link->u.mgd.mu_edca_last_param_set = mu_edca_count; + + pos = wmm_param + 8; + left = wmm_param_len - 8; + + memset(¶ms, 0, sizeof(params)); + + sdata->wmm_acm = 0; + for (; left >= 4; left -= 4, pos += 4) { + int aci = (pos[0] >> 5) & 0x03; + int acm = (pos[0] >> 4) & 0x01; + bool uapsd = false; + + switch (aci) { + case 1: /* AC_BK */ + ac = IEEE80211_AC_BK; + if (acm) + sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */ + if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK) + uapsd = true; + params[ac].mu_edca = !!mu_edca; + if (mu_edca) + params[ac].mu_edca_param_rec = mu_edca->ac_bk; + break; + case 2: /* AC_VI */ + ac = IEEE80211_AC_VI; + if (acm) + sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */ + if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI) + uapsd = true; + params[ac].mu_edca = !!mu_edca; + if (mu_edca) + params[ac].mu_edca_param_rec = mu_edca->ac_vi; + break; + case 3: /* AC_VO */ + ac = IEEE80211_AC_VO; + if (acm) + sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */ + if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) + uapsd = true; + params[ac].mu_edca = !!mu_edca; + if (mu_edca) + params[ac].mu_edca_param_rec = mu_edca->ac_vo; + break; + case 0: /* AC_BE */ + default: + ac = IEEE80211_AC_BE; + if (acm) + sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */ + if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE) + uapsd = true; + params[ac].mu_edca = !!mu_edca; + if (mu_edca) + params[ac].mu_edca_param_rec = mu_edca->ac_be; + break; + } + + params[ac].aifs = pos[0] & 0x0f; + + if (params[ac].aifs < 2) { + sdata_info(sdata, + "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n", + params[ac].aifs, aci); + params[ac].aifs = 2; + } + params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4); + params[ac].cw_min = ecw2cw(pos[1] & 0x0f); + params[ac].txop = get_unaligned_le16(pos + 2); + params[ac].acm = acm; + params[ac].uapsd = uapsd; + + if (params[ac].cw_min == 0 || + params[ac].cw_min > params[ac].cw_max) { + sdata_info(sdata, + "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n", + params[ac].cw_min, params[ac].cw_max, aci); + return false; + } + ieee80211_regulatory_limit_wmm_params(sdata, ¶ms[ac], ac); + } + + /* WMM specification requires all 4 ACIs. */ + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { + if (params[ac].cw_min == 0) { + sdata_info(sdata, + "AP has invalid WMM params (missing AC %d), using defaults\n", + ac); + return false; + } + } + + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) + link->tx_conf[ac] = params[ac]; + + ieee80211_mgd_set_link_qos_params(link); + + /* enable WMM or activate new settings */ + link->conf->qos = true; + return true; +} + +static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata) +{ + lockdep_assert_held(&sdata->local->mtx); + + sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL; + ieee80211_run_deferred_scan(sdata->local); +} + +static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata) +{ + mutex_lock(&sdata->local->mtx); + __ieee80211_stop_poll(sdata); + mutex_unlock(&sdata->local->mtx); +} + +static u32 ieee80211_handle_bss_capability(struct ieee80211_link_data *link, + u16 capab, bool erp_valid, u8 erp) +{ + struct ieee80211_bss_conf *bss_conf = link->conf; + struct ieee80211_supported_band *sband; + u32 changed = 0; + bool use_protection; + bool use_short_preamble; + bool use_short_slot; + + sband = ieee80211_get_link_sband(link); + if (!sband) + return changed; + + if (erp_valid) { + use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0; + use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0; + } else { + use_protection = false; + use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE); + } + + use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME); + if (sband->band == NL80211_BAND_5GHZ || + sband->band == NL80211_BAND_6GHZ) + use_short_slot = true; + + if (use_protection != bss_conf->use_cts_prot) { + bss_conf->use_cts_prot = use_protection; + changed |= BSS_CHANGED_ERP_CTS_PROT; + } + + if (use_short_preamble != bss_conf->use_short_preamble) { + bss_conf->use_short_preamble = use_short_preamble; + changed |= BSS_CHANGED_ERP_PREAMBLE; + } + + if (use_short_slot != bss_conf->use_short_slot) { + bss_conf->use_short_slot = use_short_slot; + changed |= BSS_CHANGED_ERP_SLOT; + } + + return changed; +} + +static u32 ieee80211_link_set_associated(struct ieee80211_link_data *link, + struct cfg80211_bss *cbss) +{ + struct ieee80211_sub_if_data *sdata = link->sdata; + struct ieee80211_bss_conf *bss_conf = link->conf; + struct ieee80211_bss *bss = (void *)cbss->priv; + u32 changed = BSS_CHANGED_QOS; + + /* not really used in MLO */ + sdata->u.mgd.beacon_timeout = + usecs_to_jiffies(ieee80211_tu_to_usec(beacon_loss_count * + bss_conf->beacon_int)); + + changed |= ieee80211_handle_bss_capability(link, + bss_conf->assoc_capability, + bss->has_erp_value, + bss->erp_value); + + ieee80211_check_rate_mask(link); + + link->u.mgd.bss = cbss; + memcpy(link->u.mgd.bssid, cbss->bssid, ETH_ALEN); + + if (sdata->vif.p2p || + sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) { + const struct cfg80211_bss_ies *ies; + + rcu_read_lock(); + ies = rcu_dereference(cbss->ies); + if (ies) { + int ret; + + ret = cfg80211_get_p2p_attr( + ies->data, ies->len, + IEEE80211_P2P_ATTR_ABSENCE_NOTICE, + (u8 *) &bss_conf->p2p_noa_attr, + sizeof(bss_conf->p2p_noa_attr)); + if (ret >= 2) { + link->u.mgd.p2p_noa_index = + bss_conf->p2p_noa_attr.index; + changed |= BSS_CHANGED_P2P_PS; + } + } + rcu_read_unlock(); + } + + if (link->u.mgd.have_beacon) { + /* + * If the AP is buggy we may get here with no DTIM period + * known, so assume it's 1 which is the only safe assumption + * in that case, although if the TIM IE is broken powersave + * probably just won't work at all. + */ + bss_conf->dtim_period = link->u.mgd.dtim_period ?: 1; + bss_conf->beacon_rate = bss->beacon_rate; + changed |= BSS_CHANGED_BEACON_INFO; + } else { + bss_conf->beacon_rate = NULL; + bss_conf->dtim_period = 0; + } + + /* Tell the driver to monitor connection quality (if supported) */ + if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI && + bss_conf->cqm_rssi_thold) + changed |= BSS_CHANGED_CQM; + + return changed; +} + +static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgd_assoc_data *assoc_data, + u64 changed[IEEE80211_MLD_MAX_NUM_LINKS]) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg; + u64 vif_changed = BSS_CHANGED_ASSOC; + unsigned int link_id; + + sdata->u.mgd.associated = true; + + for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) { + struct cfg80211_bss *cbss = assoc_data->link[link_id].bss; + struct ieee80211_link_data *link; + + if (!cbss) + continue; + + link = sdata_dereference(sdata->link[link_id], sdata); + if (WARN_ON(!link)) + return; + + changed[link_id] |= ieee80211_link_set_associated(link, cbss); + } + + /* just to be sure */ + ieee80211_stop_poll(sdata); + + ieee80211_led_assoc(local, 1); + + vif_cfg->assoc = 1; + + /* Enable ARP filtering */ + if (vif_cfg->arp_addr_cnt) + vif_changed |= BSS_CHANGED_ARP_FILTER; + + if (sdata->vif.valid_links) { + for (link_id = 0; + link_id < IEEE80211_MLD_MAX_NUM_LINKS; + link_id++) { + struct ieee80211_link_data *link; + struct cfg80211_bss *cbss = assoc_data->link[link_id].bss; + + if (!cbss) + continue; + + link = sdata_dereference(sdata->link[link_id], sdata); + if (WARN_ON(!link)) + return; + + ieee80211_link_info_change_notify(sdata, link, + changed[link_id]); + + ieee80211_recalc_smps(sdata, link); + } + + ieee80211_vif_cfg_change_notify(sdata, vif_changed); + } else { + ieee80211_bss_info_change_notify(sdata, + vif_changed | changed[0]); + } + + mutex_lock(&local->iflist_mtx); + ieee80211_recalc_ps(local); + mutex_unlock(&local->iflist_mtx); + + /* leave this here to not change ordering in non-MLO cases */ + if (!sdata->vif.valid_links) + ieee80211_recalc_smps(sdata, &sdata->deflink); + ieee80211_recalc_ps_vif(sdata); + + netif_carrier_on(sdata->dev); +} + +static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, + u16 stype, u16 reason, bool tx, + u8 *frame_buf) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_local *local = sdata->local; + unsigned int link_id; + u32 changed = 0; + struct ieee80211_prep_tx_info info = { + .subtype = stype, + }; + + sdata_assert_lock(sdata); + + if (WARN_ON_ONCE(tx && !frame_buf)) + return; + + if (WARN_ON(!ifmgd->associated)) + return; + + ieee80211_stop_poll(sdata); + + ifmgd->associated = false; + + /* other links will be destroyed */ + sdata->deflink.u.mgd.bss = NULL; + + netif_carrier_off(sdata->dev); + + /* + * if we want to get out of ps before disassoc (why?) we have + * to do it before sending disassoc, as otherwise the null-packet + * won't be valid. + */ + if (local->hw.conf.flags & IEEE80211_CONF_PS) { + local->hw.conf.flags &= ~IEEE80211_CONF_PS; + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); + } + local->ps_sdata = NULL; + + /* disable per-vif ps */ + ieee80211_recalc_ps_vif(sdata); + + /* make sure ongoing transmission finishes */ + synchronize_net(); + + /* + * drop any frame before deauth/disassoc, this can be data or + * management frame. Since we are disconnecting, we should not + * insist sending these frames which can take time and delay + * the disconnection and possible the roaming. + */ + if (tx) + ieee80211_flush_queues(local, sdata, true); + + /* deauthenticate/disassociate now */ + if (tx || frame_buf) { + /* + * In multi channel scenarios guarantee that the virtual + * interface is granted immediate airtime to transmit the + * deauthentication frame by calling mgd_prepare_tx, if the + * driver requested so. + */ + if (ieee80211_hw_check(&local->hw, DEAUTH_NEED_MGD_TX_PREP) && + !sdata->deflink.u.mgd.have_beacon) { + drv_mgd_prepare_tx(sdata->local, sdata, &info); + } + + ieee80211_send_deauth_disassoc(sdata, sdata->vif.cfg.ap_addr, + sdata->vif.cfg.ap_addr, stype, + reason, tx, frame_buf); + } + + /* flush out frame - make sure the deauth was actually sent */ + if (tx) + ieee80211_flush_queues(local, sdata, false); + + drv_mgd_complete_tx(sdata->local, sdata, &info); + + /* clear AP addr only after building the needed mgmt frames */ + eth_zero_addr(sdata->deflink.u.mgd.bssid); + eth_zero_addr(sdata->vif.cfg.ap_addr); + + sdata->vif.cfg.ssid_len = 0; + + /* remove AP and TDLS peers */ + sta_info_flush(sdata); + + /* finally reset all BSS / config parameters */ + if (!sdata->vif.valid_links) + changed |= ieee80211_reset_erp_info(sdata); + + ieee80211_led_assoc(local, 0); + changed |= BSS_CHANGED_ASSOC; + sdata->vif.cfg.assoc = false; + + sdata->deflink.u.mgd.p2p_noa_index = -1; + memset(&sdata->vif.bss_conf.p2p_noa_attr, 0, + sizeof(sdata->vif.bss_conf.p2p_noa_attr)); + + /* on the next assoc, re-program HT/VHT parameters */ + memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa)); + memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask)); + memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa)); + memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask)); + + /* + * reset MU-MIMO ownership and group data in default link, + * if used, other links are destroyed + */ + memset(sdata->vif.bss_conf.mu_group.membership, 0, + sizeof(sdata->vif.bss_conf.mu_group.membership)); + memset(sdata->vif.bss_conf.mu_group.position, 0, + sizeof(sdata->vif.bss_conf.mu_group.position)); + if (!sdata->vif.valid_links) + changed |= BSS_CHANGED_MU_GROUPS; + sdata->vif.bss_conf.mu_mimo_owner = false; + + sdata->deflink.ap_power_level = IEEE80211_UNSET_POWER_LEVEL; + + del_timer_sync(&local->dynamic_ps_timer); + cancel_work_sync(&local->dynamic_ps_enable_work); + + /* Disable ARP filtering */ + if (sdata->vif.cfg.arp_addr_cnt) + changed |= BSS_CHANGED_ARP_FILTER; + + sdata->vif.bss_conf.qos = false; + if (!sdata->vif.valid_links) { + changed |= BSS_CHANGED_QOS; + /* The BSSID (not really interesting) and HT changed */ + changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT; + ieee80211_bss_info_change_notify(sdata, changed); + } else { + ieee80211_vif_cfg_change_notify(sdata, changed); + } + + /* disassociated - set to defaults now */ + ieee80211_set_wmm_default(&sdata->deflink, false, false); + + del_timer_sync(&sdata->u.mgd.conn_mon_timer); + del_timer_sync(&sdata->u.mgd.bcn_mon_timer); + del_timer_sync(&sdata->u.mgd.timer); + del_timer_sync(&sdata->deflink.u.mgd.chswitch_timer); + + sdata->vif.bss_conf.dtim_period = 0; + sdata->vif.bss_conf.beacon_rate = NULL; + + sdata->deflink.u.mgd.have_beacon = false; + sdata->deflink.u.mgd.tracking_signal_avg = false; + sdata->deflink.u.mgd.disable_wmm_tracking = false; + + ifmgd->flags = 0; + sdata->deflink.u.mgd.conn_flags = 0; + mutex_lock(&local->mtx); + + for (link_id = 0; link_id < ARRAY_SIZE(sdata->link); link_id++) { + struct ieee80211_link_data *link; + + link = sdata_dereference(sdata->link[link_id], sdata); + if (!link) + continue; + ieee80211_link_release_channel(link); + } + + sdata->vif.bss_conf.csa_active = false; + sdata->deflink.u.mgd.csa_waiting_bcn = false; + sdata->deflink.u.mgd.csa_ignored_same_chan = false; + if (sdata->deflink.csa_block_tx) { + ieee80211_wake_vif_queues(local, sdata, + IEEE80211_QUEUE_STOP_REASON_CSA); + sdata->deflink.csa_block_tx = false; + } + mutex_unlock(&local->mtx); + + /* existing TX TSPEC sessions no longer exist */ + memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec)); + cancel_delayed_work_sync(&ifmgd->tx_tspec_wk); + + sdata->vif.bss_conf.pwr_reduction = 0; + sdata->vif.bss_conf.tx_pwr_env_num = 0; + memset(sdata->vif.bss_conf.tx_pwr_env, 0, + sizeof(sdata->vif.bss_conf.tx_pwr_env)); + + ieee80211_vif_set_links(sdata, 0); +} + +static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_local *local = sdata->local; + + mutex_lock(&local->mtx); + if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)) + goto out; + + __ieee80211_stop_poll(sdata); + + mutex_lock(&local->iflist_mtx); + ieee80211_recalc_ps(local); + mutex_unlock(&local->iflist_mtx); + + if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) + goto out; + + /* + * We've received a probe response, but are not sure whether + * we have or will be receiving any beacons or data, so let's + * schedule the timers again, just in case. + */ + ieee80211_sta_reset_beacon_monitor(sdata); + + mod_timer(&ifmgd->conn_mon_timer, + round_jiffies_up(jiffies + + IEEE80211_CONNECTION_IDLE_TIME)); +out: + mutex_unlock(&local->mtx); +} + +static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata, + struct ieee80211_hdr *hdr, + u16 tx_time) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + u16 tid; + int ac; + struct ieee80211_sta_tx_tspec *tx_tspec; + unsigned long now = jiffies; + + if (!ieee80211_is_data_qos(hdr->frame_control)) + return; + + tid = ieee80211_get_tid(hdr); + ac = ieee80211_ac_from_tid(tid); + tx_tspec = &ifmgd->tx_tspec[ac]; + + if (likely(!tx_tspec->admitted_time)) + return; + + if (time_after(now, tx_tspec->time_slice_start + HZ)) { + tx_tspec->consumed_tx_time = 0; + tx_tspec->time_slice_start = now; + + if (tx_tspec->downgraded) { + tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE; + schedule_delayed_work(&ifmgd->tx_tspec_wk, 0); + } + } + + if (tx_tspec->downgraded) + return; + + tx_tspec->consumed_tx_time += tx_time; + + if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) { + tx_tspec->downgraded = true; + tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE; + schedule_delayed_work(&ifmgd->tx_tspec_wk, 0); + } +} + +void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata, + struct ieee80211_hdr *hdr, bool ack, u16 tx_time) +{ + ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time); + + if (!ieee80211_is_any_nullfunc(hdr->frame_control) || + !sdata->u.mgd.probe_send_count) + return; + + if (ack) + sdata->u.mgd.probe_send_count = 0; + else + sdata->u.mgd.nullfunc_failed = true; + ieee80211_queue_work(&sdata->local->hw, &sdata->work); +} + +static void ieee80211_mlme_send_probe_req(struct ieee80211_sub_if_data *sdata, + const u8 *src, const u8 *dst, + const u8 *ssid, size_t ssid_len, + struct ieee80211_channel *channel) +{ + struct sk_buff *skb; + + skb = ieee80211_build_probe_req(sdata, src, dst, (u32)-1, channel, + ssid, ssid_len, NULL, 0, + IEEE80211_PROBE_FLAG_DIRECTED); + if (skb) + ieee80211_tx_skb(sdata, skb); +} + +static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + u8 *dst = sdata->vif.cfg.ap_addr; + u8 unicast_limit = max(1, max_probe_tries - 3); + struct sta_info *sta; + + if (WARN_ON(sdata->vif.valid_links)) + return; + + /* + * Try sending broadcast probe requests for the last three + * probe requests after the first ones failed since some + * buggy APs only support broadcast probe requests. + */ + if (ifmgd->probe_send_count >= unicast_limit) + dst = NULL; + + /* + * When the hardware reports an accurate Tx ACK status, it's + * better to send a nullfunc frame instead of a probe request, + * as it will kick us off the AP quickly if we aren't associated + * anymore. The timeout will be reset if the frame is ACKed by + * the AP. + */ + ifmgd->probe_send_count++; + + if (dst) { + mutex_lock(&sdata->local->sta_mtx); + sta = sta_info_get(sdata, dst); + if (!WARN_ON(!sta)) + ieee80211_check_fast_rx(sta); + mutex_unlock(&sdata->local->sta_mtx); + } + + if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) { + ifmgd->nullfunc_failed = false; + ieee80211_send_nullfunc(sdata->local, sdata, false); + } else { + ieee80211_mlme_send_probe_req(sdata, sdata->vif.addr, dst, + sdata->vif.cfg.ssid, + sdata->vif.cfg.ssid_len, + sdata->deflink.u.mgd.bss->channel); + } + + ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms); + run_again(sdata, ifmgd->probe_timeout); +} + +static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, + bool beacon) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + bool already = false; + + if (WARN_ON(sdata->vif.valid_links)) + return; + + if (!ieee80211_sdata_running(sdata)) + return; + + sdata_lock(sdata); + + if (!ifmgd->associated) + goto out; + + mutex_lock(&sdata->local->mtx); + + if (sdata->local->tmp_channel || sdata->local->scanning) { + mutex_unlock(&sdata->local->mtx); + goto out; + } + + if (sdata->local->suspending) { + /* reschedule after resume */ + mutex_unlock(&sdata->local->mtx); + ieee80211_reset_ap_probe(sdata); + goto out; + } + + if (beacon) { + mlme_dbg_ratelimited(sdata, + "detected beacon loss from AP (missed %d beacons) - probing\n", + beacon_loss_count); + + ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL); + } + + /* + * The driver/our work has already reported this event or the + * connection monitoring has kicked in and we have already sent + * a probe request. Or maybe the AP died and the driver keeps + * reporting until we disassociate... + * + * In either case we have to ignore the current call to this + * function (except for setting the correct probe reason bit) + * because otherwise we would reset the timer every time and + * never check whether we received a probe response! + */ + if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) + already = true; + + ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL; + + mutex_unlock(&sdata->local->mtx); + + if (already) + goto out; + + mutex_lock(&sdata->local->iflist_mtx); + ieee80211_recalc_ps(sdata->local); + mutex_unlock(&sdata->local->iflist_mtx); + + ifmgd->probe_send_count = 0; + ieee80211_mgd_probe_ap_send(sdata); + out: + sdata_unlock(sdata); +} + +struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct cfg80211_bss *cbss; + struct sk_buff *skb; + const struct element *ssid; + int ssid_len; + + if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION || + sdata->vif.valid_links)) + return NULL; + + sdata_assert_lock(sdata); + + if (ifmgd->associated) + cbss = sdata->deflink.u.mgd.bss; + else if (ifmgd->auth_data) + cbss = ifmgd->auth_data->bss; + else if (ifmgd->assoc_data && ifmgd->assoc_data->link[0].bss) + cbss = ifmgd->assoc_data->link[0].bss; + else + return NULL; + + rcu_read_lock(); + ssid = ieee80211_bss_get_elem(cbss, WLAN_EID_SSID); + if (WARN_ONCE(!ssid || ssid->datalen > IEEE80211_MAX_SSID_LEN, + "invalid SSID element (len=%d)", + ssid ? ssid->datalen : -1)) + ssid_len = 0; + else + ssid_len = ssid->datalen; + + skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid, + (u32) -1, cbss->channel, + ssid->data, ssid_len, + NULL, 0, IEEE80211_PROBE_FLAG_DIRECTED); + rcu_read_unlock(); + + return skb; +} +EXPORT_SYMBOL(ieee80211_ap_probereq_get); + +static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata, + const u8 *buf, size_t len, bool tx, + u16 reason, bool reconnect) +{ + struct ieee80211_event event = { + .type = MLME_EVENT, + .u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT, + .u.mlme.reason = reason, + }; + + if (tx) + cfg80211_tx_mlme_mgmt(sdata->dev, buf, len, reconnect); + else + cfg80211_rx_mlme_mgmt(sdata->dev, buf, len); + + drv_event_callback(sdata->local, sdata, &event); +} + +static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; + bool tx; + + sdata_lock(sdata); + if (!ifmgd->associated) { + sdata_unlock(sdata); + return; + } + + /* in MLO assume we have a link where we can TX the frame */ + tx = sdata->vif.valid_links || !sdata->deflink.csa_block_tx; + + if (!ifmgd->driver_disconnect) { + unsigned int link_id; + + /* + * AP is probably out of range (or not reachable for another + * reason) so remove the bss structs for that AP. In the case + * of multi-link, it's not clear that all of them really are + * out of range, but if they weren't the driver likely would + * have switched to just have a single link active? + */ + for (link_id = 0; + link_id < ARRAY_SIZE(sdata->link); + link_id++) { + struct ieee80211_link_data *link; + + link = sdata_dereference(sdata->link[link_id], sdata); + if (!link) + continue; + cfg80211_unlink_bss(local->hw.wiphy, link->u.mgd.bss); + link->u.mgd.bss = NULL; + } + } + + ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, + ifmgd->driver_disconnect ? + WLAN_REASON_DEAUTH_LEAVING : + WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, + tx, frame_buf); + mutex_lock(&local->mtx); + /* the other links will be destroyed */ + sdata->vif.bss_conf.csa_active = false; + sdata->deflink.u.mgd.csa_waiting_bcn = false; + if (sdata->deflink.csa_block_tx) { + ieee80211_wake_vif_queues(local, sdata, + IEEE80211_QUEUE_STOP_REASON_CSA); + sdata->deflink.csa_block_tx = false; + } + mutex_unlock(&local->mtx); + + ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx, + WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, + ifmgd->reconnect); + ifmgd->reconnect = false; + + sdata_unlock(sdata); +} + +static void ieee80211_beacon_connection_loss_work(struct work_struct *work) +{ + struct ieee80211_sub_if_data *sdata = + container_of(work, struct ieee80211_sub_if_data, + u.mgd.beacon_connection_loss_work); + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + + if (ifmgd->connection_loss) { + sdata_info(sdata, "Connection to AP %pM lost\n", + sdata->vif.cfg.ap_addr); + __ieee80211_disconnect(sdata); + ifmgd->connection_loss = false; + } else if (ifmgd->driver_disconnect) { + sdata_info(sdata, + "Driver requested disconnection from AP %pM\n", + sdata->vif.cfg.ap_addr); + __ieee80211_disconnect(sdata); + ifmgd->driver_disconnect = false; + } else { + if (ifmgd->associated) + sdata->deflink.u.mgd.beacon_loss_count++; + ieee80211_mgd_probe_ap(sdata, true); + } +} + +static void ieee80211_csa_connection_drop_work(struct work_struct *work) +{ + struct ieee80211_sub_if_data *sdata = + container_of(work, struct ieee80211_sub_if_data, + u.mgd.csa_connection_drop_work); + + __ieee80211_disconnect(sdata); +} + +void ieee80211_beacon_loss(struct ieee80211_vif *vif) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + struct ieee80211_hw *hw = &sdata->local->hw; + + trace_api_beacon_loss(sdata); + + sdata->u.mgd.connection_loss = false; + ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); +} +EXPORT_SYMBOL(ieee80211_beacon_loss); + +void ieee80211_connection_loss(struct ieee80211_vif *vif) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + struct ieee80211_hw *hw = &sdata->local->hw; + + trace_api_connection_loss(sdata); + + sdata->u.mgd.connection_loss = true; + ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); +} +EXPORT_SYMBOL(ieee80211_connection_loss); + +void ieee80211_disconnect(struct ieee80211_vif *vif, bool reconnect) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + struct ieee80211_hw *hw = &sdata->local->hw; + + trace_api_disconnect(sdata, reconnect); + + if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) + return; + + sdata->u.mgd.driver_disconnect = true; + sdata->u.mgd.reconnect = reconnect; + ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); +} +EXPORT_SYMBOL(ieee80211_disconnect); + +static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata, + bool assoc) +{ + struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; + + sdata_assert_lock(sdata); + + if (!assoc) { + /* + * we are not authenticated yet, the only timer that could be + * running is the timeout for the authentication response which + * which is not relevant anymore. + */ + del_timer_sync(&sdata->u.mgd.timer); + sta_info_destroy_addr(sdata, auth_data->ap_addr); + + /* other links are destroyed */ + sdata->deflink.u.mgd.conn_flags = 0; + eth_zero_addr(sdata->deflink.u.mgd.bssid); + ieee80211_link_info_change_notify(sdata, &sdata->deflink, + BSS_CHANGED_BSSID); + sdata->u.mgd.flags = 0; + + mutex_lock(&sdata->local->mtx); + ieee80211_link_release_channel(&sdata->deflink); + ieee80211_vif_set_links(sdata, 0); + mutex_unlock(&sdata->local->mtx); + } + + cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss); + kfree(auth_data); + sdata->u.mgd.auth_data = NULL; +} + +enum assoc_status { + ASSOC_SUCCESS, + ASSOC_REJECTED, + ASSOC_TIMEOUT, + ASSOC_ABANDON, +}; + +static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata, + enum assoc_status status) +{ + struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; + + sdata_assert_lock(sdata); + + if (status != ASSOC_SUCCESS) { + /* + * we are not associated yet, the only timer that could be + * running is the timeout for the association response which + * which is not relevant anymore. + */ + del_timer_sync(&sdata->u.mgd.timer); + sta_info_destroy_addr(sdata, assoc_data->ap_addr); + + sdata->deflink.u.mgd.conn_flags = 0; + eth_zero_addr(sdata->deflink.u.mgd.bssid); + ieee80211_link_info_change_notify(sdata, &sdata->deflink, + BSS_CHANGED_BSSID); + sdata->u.mgd.flags = 0; + sdata->vif.bss_conf.mu_mimo_owner = false; + + if (status != ASSOC_REJECTED) { + struct cfg80211_assoc_failure data = { + .timeout = status == ASSOC_TIMEOUT, + }; + int i; + + BUILD_BUG_ON(ARRAY_SIZE(data.bss) != + ARRAY_SIZE(assoc_data->link)); + + for (i = 0; i < ARRAY_SIZE(data.bss); i++) + data.bss[i] = assoc_data->link[i].bss; + + if (sdata->vif.valid_links) + data.ap_mld_addr = assoc_data->ap_addr; + + cfg80211_assoc_failure(sdata->dev, &data); + } + + mutex_lock(&sdata->local->mtx); + ieee80211_link_release_channel(&sdata->deflink); + ieee80211_vif_set_links(sdata, 0); + mutex_unlock(&sdata->local->mtx); + } + + kfree(assoc_data); + sdata->u.mgd.assoc_data = NULL; +} + +static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, size_t len) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; + const struct element *challenge; + u8 *pos; + u32 tx_flags = 0; + struct ieee80211_prep_tx_info info = { + .subtype = IEEE80211_STYPE_AUTH, + }; + + pos = mgmt->u.auth.variable; + challenge = cfg80211_find_elem(WLAN_EID_CHALLENGE, pos, + len - (pos - (u8 *)mgmt)); + if (!challenge) + return; + auth_data->expected_transaction = 4; + drv_mgd_prepare_tx(sdata->local, sdata, &info); + if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) + tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | + IEEE80211_TX_INTFL_MLME_CONN_TX; + ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0, + (void *)challenge, + challenge->datalen + sizeof(*challenge), + auth_data->ap_addr, auth_data->ap_addr, + auth_data->key, auth_data->key_len, + auth_data->key_idx, tx_flags); +} + +static bool ieee80211_mark_sta_auth(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + const u8 *ap_addr = ifmgd->auth_data->ap_addr; + struct sta_info *sta; + bool result = true; + + sdata_info(sdata, "authenticated\n"); + ifmgd->auth_data->done = true; + ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC; + ifmgd->auth_data->timeout_started = true; + run_again(sdata, ifmgd->auth_data->timeout); + + /* move station state to auth */ + mutex_lock(&sdata->local->sta_mtx); + sta = sta_info_get(sdata, ap_addr); + if (!sta) { + WARN_ONCE(1, "%s: STA %pM not found", sdata->name, ap_addr); + result = false; + goto out; + } + if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) { + sdata_info(sdata, "failed moving %pM to auth\n", ap_addr); + result = false; + goto out; + } + +out: + mutex_unlock(&sdata->local->sta_mtx); + return result; +} + +static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, size_t len) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + u16 auth_alg, auth_transaction, status_code; + struct ieee80211_event event = { + .type = MLME_EVENT, + .u.mlme.data = AUTH_EVENT, + }; + struct ieee80211_prep_tx_info info = { + .subtype = IEEE80211_STYPE_AUTH, + }; + + sdata_assert_lock(sdata); + + if (len < 24 + 6) + return; + + if (!ifmgd->auth_data || ifmgd->auth_data->done) + return; + + if (!ether_addr_equal(ifmgd->auth_data->ap_addr, mgmt->bssid)) + return; + + auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg); + auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction); + status_code = le16_to_cpu(mgmt->u.auth.status_code); + + if (auth_alg != ifmgd->auth_data->algorithm || + (auth_alg != WLAN_AUTH_SAE && + auth_transaction != ifmgd->auth_data->expected_transaction) || + (auth_alg == WLAN_AUTH_SAE && + (auth_transaction < ifmgd->auth_data->expected_transaction || + auth_transaction > 2))) { + sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n", + mgmt->sa, auth_alg, ifmgd->auth_data->algorithm, + auth_transaction, + ifmgd->auth_data->expected_transaction); + goto notify_driver; + } + + if (status_code != WLAN_STATUS_SUCCESS) { + cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); + + if (auth_alg == WLAN_AUTH_SAE && + (status_code == WLAN_STATUS_ANTI_CLOG_REQUIRED || + (auth_transaction == 1 && + (status_code == WLAN_STATUS_SAE_HASH_TO_ELEMENT || + status_code == WLAN_STATUS_SAE_PK)))) { + /* waiting for userspace now */ + ifmgd->auth_data->waiting = true; + ifmgd->auth_data->timeout = + jiffies + IEEE80211_AUTH_WAIT_SAE_RETRY; + ifmgd->auth_data->timeout_started = true; + run_again(sdata, ifmgd->auth_data->timeout); + goto notify_driver; + } + + sdata_info(sdata, "%pM denied authentication (status %d)\n", + mgmt->sa, status_code); + ieee80211_destroy_auth_data(sdata, false); + event.u.mlme.status = MLME_DENIED; + event.u.mlme.reason = status_code; + drv_event_callback(sdata->local, sdata, &event); + goto notify_driver; + } + + switch (ifmgd->auth_data->algorithm) { + case WLAN_AUTH_OPEN: + case WLAN_AUTH_LEAP: + case WLAN_AUTH_FT: + case WLAN_AUTH_SAE: + case WLAN_AUTH_FILS_SK: + case WLAN_AUTH_FILS_SK_PFS: + case WLAN_AUTH_FILS_PK: + break; + case WLAN_AUTH_SHARED_KEY: + if (ifmgd->auth_data->expected_transaction != 4) { + ieee80211_auth_challenge(sdata, mgmt, len); + /* need another frame */ + return; + } + break; + default: + WARN_ONCE(1, "invalid auth alg %d", + ifmgd->auth_data->algorithm); + goto notify_driver; + } + + event.u.mlme.status = MLME_SUCCESS; + info.success = 1; + drv_event_callback(sdata->local, sdata, &event); + if (ifmgd->auth_data->algorithm != WLAN_AUTH_SAE || + (auth_transaction == 2 && + ifmgd->auth_data->expected_transaction == 2)) { + if (!ieee80211_mark_sta_auth(sdata)) + return; /* ignore frame -- wait for timeout */ + } else if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE && + auth_transaction == 2) { + sdata_info(sdata, "SAE peer confirmed\n"); + ifmgd->auth_data->peer_confirmed = true; + } + + cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); +notify_driver: + drv_mgd_complete_tx(sdata->local, sdata, &info); +} + +#define case_WLAN(type) \ + case WLAN_REASON_##type: return #type + +const char *ieee80211_get_reason_code_string(u16 reason_code) +{ + switch (reason_code) { + case_WLAN(UNSPECIFIED); + case_WLAN(PREV_AUTH_NOT_VALID); + case_WLAN(DEAUTH_LEAVING); + case_WLAN(DISASSOC_DUE_TO_INACTIVITY); + case_WLAN(DISASSOC_AP_BUSY); + case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA); + case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA); + case_WLAN(DISASSOC_STA_HAS_LEFT); + case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH); + case_WLAN(DISASSOC_BAD_POWER); + case_WLAN(DISASSOC_BAD_SUPP_CHAN); + case_WLAN(INVALID_IE); + case_WLAN(MIC_FAILURE); + case_WLAN(4WAY_HANDSHAKE_TIMEOUT); + case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT); + case_WLAN(IE_DIFFERENT); + case_WLAN(INVALID_GROUP_CIPHER); + case_WLAN(INVALID_PAIRWISE_CIPHER); + case_WLAN(INVALID_AKMP); + case_WLAN(UNSUPP_RSN_VERSION); + case_WLAN(INVALID_RSN_IE_CAP); + case_WLAN(IEEE8021X_FAILED); + case_WLAN(CIPHER_SUITE_REJECTED); + case_WLAN(DISASSOC_UNSPECIFIED_QOS); + case_WLAN(DISASSOC_QAP_NO_BANDWIDTH); + case_WLAN(DISASSOC_LOW_ACK); + case_WLAN(DISASSOC_QAP_EXCEED_TXOP); + case_WLAN(QSTA_LEAVE_QBSS); + case_WLAN(QSTA_NOT_USE); + case_WLAN(QSTA_REQUIRE_SETUP); + case_WLAN(QSTA_TIMEOUT); + case_WLAN(QSTA_CIPHER_NOT_SUPP); + case_WLAN(MESH_PEER_CANCELED); + case_WLAN(MESH_MAX_PEERS); + case_WLAN(MESH_CONFIG); + case_WLAN(MESH_CLOSE); + case_WLAN(MESH_MAX_RETRIES); + case_WLAN(MESH_CONFIRM_TIMEOUT); + case_WLAN(MESH_INVALID_GTK); + case_WLAN(MESH_INCONSISTENT_PARAM); + case_WLAN(MESH_INVALID_SECURITY); + case_WLAN(MESH_PATH_ERROR); + case_WLAN(MESH_PATH_NOFORWARD); + case_WLAN(MESH_PATH_DEST_UNREACHABLE); + case_WLAN(MAC_EXISTS_IN_MBSS); + case_WLAN(MESH_CHAN_REGULATORY); + case_WLAN(MESH_CHAN); + default: return "<unknown>"; + } +} + +static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, size_t len) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code); + + sdata_assert_lock(sdata); + + if (len < 24 + 2) + return; + + if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) { + ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code); + return; + } + + if (ifmgd->associated && + ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)) { + sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n", + sdata->vif.cfg.ap_addr, reason_code, + ieee80211_get_reason_code_string(reason_code)); + + ieee80211_set_disassoc(sdata, 0, 0, false, NULL); + + ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, + reason_code, false); + return; + } + + if (ifmgd->assoc_data && + ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->ap_addr)) { + sdata_info(sdata, + "deauthenticated from %pM while associating (Reason: %u=%s)\n", + ifmgd->assoc_data->ap_addr, reason_code, + ieee80211_get_reason_code_string(reason_code)); + + ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON); + + cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); + return; + } +} + + +static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, size_t len) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + u16 reason_code; + + sdata_assert_lock(sdata); + + if (len < 24 + 2) + return; + + if (!ifmgd->associated || + !ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)) + return; + + reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code); + + if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) { + ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code); + return; + } + + sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n", + sdata->vif.cfg.ap_addr, reason_code, + ieee80211_get_reason_code_string(reason_code)); + + ieee80211_set_disassoc(sdata, 0, 0, false, NULL); + + ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code, + false); +} + +static void ieee80211_get_rates(struct ieee80211_supported_band *sband, + u8 *supp_rates, unsigned int supp_rates_len, + u32 *rates, u32 *basic_rates, + bool *have_higher_than_11mbit, + int *min_rate, int *min_rate_index, + int shift) +{ + int i, j; + + for (i = 0; i < supp_rates_len; i++) { + int rate = supp_rates[i] & 0x7f; + bool is_basic = !!(supp_rates[i] & 0x80); + + if ((rate * 5 * (1 << shift)) > 110) + *have_higher_than_11mbit = true; + + /* + * Skip HT, VHT, HE and SAE H2E only BSS membership selectors + * since they're not rates. + * + * Note: Even though the membership selector and the basic + * rate flag share the same bit, they are not exactly + * the same. + */ + if (supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HT_PHY) || + supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY) || + supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HE_PHY) || + supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_SAE_H2E)) + continue; + + for (j = 0; j < sband->n_bitrates; j++) { + struct ieee80211_rate *br; + int brate; + + br = &sband->bitrates[j]; + + brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5); + if (brate == rate) { + *rates |= BIT(j); + if (is_basic) + *basic_rates |= BIT(j); + if ((rate * 5) < *min_rate) { + *min_rate = rate * 5; + *min_rate_index = j; + } + break; + } + } + } +} + +static bool ieee80211_twt_req_supported(const struct link_sta_info *link_sta, + const struct ieee802_11_elems *elems) +{ + if (elems->ext_capab_len < 10) + return false; + + if (!(elems->ext_capab[9] & WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT)) + return false; + + return link_sta->pub->he_cap.he_cap_elem.mac_cap_info[0] & + IEEE80211_HE_MAC_CAP0_TWT_RES; +} + +static int ieee80211_recalc_twt_req(struct ieee80211_link_data *link, + struct link_sta_info *link_sta, + struct ieee802_11_elems *elems) +{ + bool twt = ieee80211_twt_req_supported(link_sta, elems); + + if (link->conf->twt_requester != twt) { + link->conf->twt_requester = twt; + return BSS_CHANGED_TWT; + } + return 0; +} + +static bool ieee80211_twt_bcast_support(struct ieee80211_sub_if_data *sdata, + struct ieee80211_bss_conf *bss_conf, + struct ieee80211_supported_band *sband, + struct link_sta_info *link_sta) +{ + const struct ieee80211_sta_he_cap *own_he_cap = + ieee80211_get_he_iftype_cap(sband, + ieee80211_vif_type_p2p(&sdata->vif)); + + return bss_conf->he_support && + (link_sta->pub->he_cap.he_cap_elem.mac_cap_info[2] & + IEEE80211_HE_MAC_CAP2_BCAST_TWT) && + own_he_cap && + (own_he_cap->he_cap_elem.mac_cap_info[2] & + IEEE80211_HE_MAC_CAP2_BCAST_TWT); +} + +static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link, + struct link_sta_info *link_sta, + struct cfg80211_bss *cbss, + struct ieee80211_mgmt *mgmt, + const u8 *elem_start, + unsigned int elem_len, + u64 *changed) +{ + struct ieee80211_sub_if_data *sdata = link->sdata; + struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; + struct ieee80211_bss_conf *bss_conf = link->conf; + struct ieee80211_local *local = sdata->local; + struct ieee80211_elems_parse_params parse_params = { + .start = elem_start, + .len = elem_len, + .bss = cbss, + .link_id = link == &sdata->deflink ? -1 : link->link_id, + .from_ap = true, + }; + bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ; + bool is_s1g = cbss->channel->band == NL80211_BAND_S1GHZ; + const struct cfg80211_bss_ies *bss_ies = NULL; + struct ieee80211_supported_band *sband; + struct ieee802_11_elems *elems; + u16 capab_info; + bool ret; + + elems = ieee802_11_parse_elems_full(&parse_params); + if (!elems) + return false; + + /* FIXME: use from STA profile element after parsing that */ + capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); + + if (!is_s1g && !elems->supp_rates) { + sdata_info(sdata, "no SuppRates element in AssocResp\n"); + ret = false; + goto out; + } + + link->u.mgd.tdls_chan_switch_prohibited = + elems->ext_capab && elems->ext_capab_len >= 5 && + (elems->ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED); + + /* + * Some APs are erroneously not including some information in their + * (re)association response frames. Try to recover by using the data + * from the beacon or probe response. This seems to afflict mobile + * 2G/3G/4G wifi routers, reported models include the "Onda PN51T", + * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device. + */ + if (!is_6ghz && + ((assoc_data->wmm && !elems->wmm_param) || + (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT) && + (!elems->ht_cap_elem || !elems->ht_operation)) || + (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT) && + (!elems->vht_cap_elem || !elems->vht_operation)))) { + const struct cfg80211_bss_ies *ies; + struct ieee802_11_elems *bss_elems; + + rcu_read_lock(); + ies = rcu_dereference(cbss->ies); + if (ies) + bss_ies = kmemdup(ies, sizeof(*ies) + ies->len, + GFP_ATOMIC); + rcu_read_unlock(); + if (!bss_ies) { + ret = false; + goto out; + } + + parse_params.start = bss_ies->data; + parse_params.len = bss_ies->len; + bss_elems = ieee802_11_parse_elems_full(&parse_params); + if (!bss_elems) { + ret = false; + goto out; + } + + if (assoc_data->wmm && + !elems->wmm_param && bss_elems->wmm_param) { + elems->wmm_param = bss_elems->wmm_param; + sdata_info(sdata, + "AP bug: WMM param missing from AssocResp\n"); + } + + /* + * Also check if we requested HT/VHT, otherwise the AP doesn't + * have to include the IEs in the (re)association response. + */ + if (!elems->ht_cap_elem && bss_elems->ht_cap_elem && + !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT)) { + elems->ht_cap_elem = bss_elems->ht_cap_elem; + sdata_info(sdata, + "AP bug: HT capability missing from AssocResp\n"); + } + if (!elems->ht_operation && bss_elems->ht_operation && + !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT)) { + elems->ht_operation = bss_elems->ht_operation; + sdata_info(sdata, + "AP bug: HT operation missing from AssocResp\n"); + } + if (!elems->vht_cap_elem && bss_elems->vht_cap_elem && + !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)) { + elems->vht_cap_elem = bss_elems->vht_cap_elem; + sdata_info(sdata, + "AP bug: VHT capa missing from AssocResp\n"); + } + if (!elems->vht_operation && bss_elems->vht_operation && + !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)) { + elems->vht_operation = bss_elems->vht_operation; + sdata_info(sdata, + "AP bug: VHT operation missing from AssocResp\n"); + } + + kfree(bss_elems); + } + + /* + * We previously checked these in the beacon/probe response, so + * they should be present here. This is just a safety net. + */ + if (!is_6ghz && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT) && + (!elems->wmm_param || !elems->ht_cap_elem || !elems->ht_operation)) { + sdata_info(sdata, + "HT AP is missing WMM params or HT capability/operation\n"); + ret = false; + goto out; + } + + if (!is_6ghz && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT) && + (!elems->vht_cap_elem || !elems->vht_operation)) { + sdata_info(sdata, + "VHT AP is missing VHT capability/operation\n"); + ret = false; + goto out; + } + + if (is_6ghz && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) && + !elems->he_6ghz_capa) { + sdata_info(sdata, + "HE 6 GHz AP is missing HE 6 GHz band capability\n"); + ret = false; + goto out; + } + + if (WARN_ON(!link->conf->chandef.chan)) { + ret = false; + goto out; + } + sband = local->hw.wiphy->bands[link->conf->chandef.chan->band]; + + if (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) && + (!elems->he_cap || !elems->he_operation)) { + sdata_info(sdata, + "HE AP is missing HE capability/operation\n"); + ret = false; + goto out; + } + + /* Set up internal HT/VHT capabilities */ + if (elems->ht_cap_elem && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT)) + ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, + elems->ht_cap_elem, + link_sta); + + if (elems->vht_cap_elem && + !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)) { + const struct ieee80211_vht_cap *bss_vht_cap = NULL; + const struct cfg80211_bss_ies *ies; + + /* + * Cisco AP module 9115 with FW 17.3 has a bug and sends a + * too large maximum MPDU length in the association response + * (indicating 12k) that it cannot actually process ... + * Work around that. + */ + rcu_read_lock(); + ies = rcu_dereference(cbss->ies); + if (ies) { + const struct element *elem; + + elem = cfg80211_find_elem(WLAN_EID_VHT_CAPABILITY, + ies->data, ies->len); + if (elem && elem->datalen >= sizeof(*bss_vht_cap)) + bss_vht_cap = (const void *)elem->data; + } + + ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, + elems->vht_cap_elem, + bss_vht_cap, link_sta); + rcu_read_unlock(); + } + + if (elems->he_operation && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) && + elems->he_cap) { + ieee80211_he_cap_ie_to_sta_he_cap(sdata, sband, + elems->he_cap, + elems->he_cap_len, + elems->he_6ghz_capa, + link_sta); + + bss_conf->he_support = link_sta->pub->he_cap.has_he; + if (elems->rsnx && elems->rsnx_len && + (elems->rsnx[0] & WLAN_RSNX_CAPA_PROTECTED_TWT) && + wiphy_ext_feature_isset(local->hw.wiphy, + NL80211_EXT_FEATURE_PROTECTED_TWT)) + bss_conf->twt_protected = true; + else + bss_conf->twt_protected = false; + + *changed |= ieee80211_recalc_twt_req(link, link_sta, elems); + + if (elems->eht_operation && elems->eht_cap && + !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_EHT)) { + ieee80211_eht_cap_ie_to_sta_eht_cap(sdata, sband, + elems->he_cap, + elems->he_cap_len, + elems->eht_cap, + elems->eht_cap_len, + link_sta); + + bss_conf->eht_support = link_sta->pub->eht_cap.has_eht; + } else { + bss_conf->eht_support = false; + } + } else { + bss_conf->he_support = false; + bss_conf->twt_requester = false; + bss_conf->twt_protected = false; + bss_conf->eht_support = false; + } + + bss_conf->twt_broadcast = + ieee80211_twt_bcast_support(sdata, bss_conf, sband, link_sta); + + if (bss_conf->he_support) { + bss_conf->he_bss_color.color = + le32_get_bits(elems->he_operation->he_oper_params, + IEEE80211_HE_OPERATION_BSS_COLOR_MASK); + bss_conf->he_bss_color.partial = + le32_get_bits(elems->he_operation->he_oper_params, + IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR); + bss_conf->he_bss_color.enabled = + !le32_get_bits(elems->he_operation->he_oper_params, + IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED); + + if (bss_conf->he_bss_color.enabled) + *changed |= BSS_CHANGED_HE_BSS_COLOR; + + bss_conf->htc_trig_based_pkt_ext = + le32_get_bits(elems->he_operation->he_oper_params, + IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK); + bss_conf->frame_time_rts_th = + le32_get_bits(elems->he_operation->he_oper_params, + IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK); + + bss_conf->uora_exists = !!elems->uora_element; + if (elems->uora_element) + bss_conf->uora_ocw_range = elems->uora_element[0]; + + ieee80211_he_op_ie_to_bss_conf(&sdata->vif, elems->he_operation); + ieee80211_he_spr_ie_to_bss_conf(&sdata->vif, elems->he_spr); + /* TODO: OPEN: what happens if BSS color disable is set? */ + } + + if (cbss->transmitted_bss) { + bss_conf->nontransmitted = true; + ether_addr_copy(bss_conf->transmitter_bssid, + cbss->transmitted_bss->bssid); + bss_conf->bssid_indicator = cbss->max_bssid_indicator; + bss_conf->bssid_index = cbss->bssid_index; + } + + /* + * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data + * in their association response, so ignore that data for our own + * configuration. If it changed since the last beacon, we'll get the + * next beacon and update then. + */ + + /* + * If an operating mode notification IE is present, override the + * NSS calculation (that would be done in rate_control_rate_init()) + * and use the # of streams from that element. + */ + if (elems->opmode_notif && + !(*elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) { + u8 nss; + + nss = *elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK; + nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT; + nss += 1; + link_sta->pub->rx_nss = nss; + } + + /* + * Always handle WMM once after association regardless + * of the first value the AP uses. Setting -1 here has + * that effect because the AP values is an unsigned + * 4-bit value. + */ + link->u.mgd.wmm_last_param_set = -1; + link->u.mgd.mu_edca_last_param_set = -1; + + if (link->u.mgd.disable_wmm_tracking) { + ieee80211_set_wmm_default(link, false, false); + } else if (!ieee80211_sta_wmm_params(local, link, elems->wmm_param, + elems->wmm_param_len, + elems->mu_edca_param_set)) { + /* still enable QoS since we might have HT/VHT */ + ieee80211_set_wmm_default(link, false, true); + /* disable WMM tracking in this case to disable + * tracking WMM parameter changes in the beacon if + * the parameters weren't actually valid. Doing so + * avoids changing parameters very strangely when + * the AP is going back and forth between valid and + * invalid parameters. + */ + link->u.mgd.disable_wmm_tracking = true; + } + + if (elems->max_idle_period_ie) { + bss_conf->max_idle_period = + le16_to_cpu(elems->max_idle_period_ie->max_idle_period); + bss_conf->protected_keep_alive = + !!(elems->max_idle_period_ie->idle_options & + WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE); + *changed |= BSS_CHANGED_KEEP_ALIVE; + } else { + bss_conf->max_idle_period = 0; + bss_conf->protected_keep_alive = false; + } + + /* set assoc capability (AID was already set earlier), + * ieee80211_set_associated() will tell the driver */ + bss_conf->assoc_capability = capab_info; + + ret = true; +out: + kfree(elems); + kfree(bss_ies); + return ret; +} + +static int ieee80211_mgd_setup_link_sta(struct ieee80211_link_data *link, + struct sta_info *sta, + struct link_sta_info *link_sta, + struct cfg80211_bss *cbss) +{ + struct ieee80211_sub_if_data *sdata = link->sdata; + struct ieee80211_local *local = sdata->local; + struct ieee80211_bss *bss = (void *)cbss->priv; + u32 rates = 0, basic_rates = 0; + bool have_higher_than_11mbit = false; + int min_rate = INT_MAX, min_rate_index = -1; + /* this is clearly wrong for MLO but we'll just remove it later */ + int shift = ieee80211_vif_get_shift(&sdata->vif); + struct ieee80211_supported_band *sband; + + memcpy(link_sta->addr, cbss->bssid, ETH_ALEN); + memcpy(link_sta->pub->addr, cbss->bssid, ETH_ALEN); + + /* TODO: S1G Basic Rate Set is expressed elsewhere */ + if (cbss->channel->band == NL80211_BAND_S1GHZ) { + ieee80211_s1g_sta_rate_init(sta); + return 0; + } + + sband = local->hw.wiphy->bands[cbss->channel->band]; + + ieee80211_get_rates(sband, bss->supp_rates, bss->supp_rates_len, + &rates, &basic_rates, &have_higher_than_11mbit, + &min_rate, &min_rate_index, shift); + + /* + * This used to be a workaround for basic rates missing + * in the association response frame. Now that we no + * longer use the basic rates from there, it probably + * doesn't happen any more, but keep the workaround so + * in case some *other* APs are buggy in different ways + * we can connect -- with a warning. + * Allow this workaround only in case the AP provided at least + * one rate. + */ + if (min_rate_index < 0) { + link_info(link, "No legacy rates in association response\n"); + return -EINVAL; + } else if (!basic_rates) { + link_info(link, "No basic rates, using min rate instead\n"); + basic_rates = BIT(min_rate_index); + } + + if (rates) + link_sta->pub->supp_rates[cbss->channel->band] = rates; + else + link_info(link, "No rates found, keeping mandatory only\n"); + + link->conf->basic_rates = basic_rates; + + /* cf. IEEE 802.11 9.2.12 */ + link->operating_11g_mode = sband->band == NL80211_BAND_2GHZ && + have_higher_than_11mbit; + + return 0; +} + +static u8 ieee80211_max_rx_chains(struct ieee80211_link_data *link, + struct cfg80211_bss *cbss) +{ + struct ieee80211_he_mcs_nss_supp *he_mcs_nss_supp; + const struct element *ht_cap_elem, *vht_cap_elem; + const struct cfg80211_bss_ies *ies; + const struct ieee80211_ht_cap *ht_cap; + const struct ieee80211_vht_cap *vht_cap; + const struct ieee80211_he_cap_elem *he_cap; + const struct element *he_cap_elem; + u16 mcs_80_map, mcs_160_map; + int i, mcs_nss_size; + bool support_160; + u8 chains = 1; + + if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT) + return chains; + + ht_cap_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_HT_CAPABILITY); + if (ht_cap_elem && ht_cap_elem->datalen >= sizeof(*ht_cap)) { + ht_cap = (void *)ht_cap_elem->data; + chains = ieee80211_mcs_to_chains(&ht_cap->mcs); + /* + * TODO: use "Tx Maximum Number Spatial Streams Supported" and + * "Tx Unequal Modulation Supported" fields. + */ + } + + if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT) + return chains; + + vht_cap_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_VHT_CAPABILITY); + if (vht_cap_elem && vht_cap_elem->datalen >= sizeof(*vht_cap)) { + u8 nss; + u16 tx_mcs_map; + + vht_cap = (void *)vht_cap_elem->data; + tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map); + for (nss = 8; nss > 0; nss--) { + if (((tx_mcs_map >> (2 * (nss - 1))) & 3) != + IEEE80211_VHT_MCS_NOT_SUPPORTED) + break; + } + /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */ + chains = max(chains, nss); + } + + if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) + return chains; + + ies = rcu_dereference(cbss->ies); + he_cap_elem = cfg80211_find_ext_elem(WLAN_EID_EXT_HE_CAPABILITY, + ies->data, ies->len); + + if (!he_cap_elem || he_cap_elem->datalen < sizeof(*he_cap)) + return chains; + + /* skip one byte ext_tag_id */ + he_cap = (void *)(he_cap_elem->data + 1); + mcs_nss_size = ieee80211_he_mcs_nss_size(he_cap); + + /* invalid HE IE */ + if (he_cap_elem->datalen < 1 + mcs_nss_size + sizeof(*he_cap)) + return chains; + + /* mcs_nss is right after he_cap info */ + he_mcs_nss_supp = (void *)(he_cap + 1); + + mcs_80_map = le16_to_cpu(he_mcs_nss_supp->tx_mcs_80); + + for (i = 7; i >= 0; i--) { + u8 mcs_80 = mcs_80_map >> (2 * i) & 3; + + if (mcs_80 != IEEE80211_VHT_MCS_NOT_SUPPORTED) { + chains = max_t(u8, chains, i + 1); + break; + } + } + + support_160 = he_cap->phy_cap_info[0] & + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G; + + if (!support_160) + return chains; + + mcs_160_map = le16_to_cpu(he_mcs_nss_supp->tx_mcs_160); + for (i = 7; i >= 0; i--) { + u8 mcs_160 = mcs_160_map >> (2 * i) & 3; + + if (mcs_160 != IEEE80211_VHT_MCS_NOT_SUPPORTED) { + chains = max_t(u8, chains, i + 1); + break; + } + } + + return chains; +} + +static bool +ieee80211_verify_peer_he_mcs_support(struct ieee80211_sub_if_data *sdata, + const struct cfg80211_bss_ies *ies, + const struct ieee80211_he_operation *he_op) +{ + const struct element *he_cap_elem; + const struct ieee80211_he_cap_elem *he_cap; + struct ieee80211_he_mcs_nss_supp *he_mcs_nss_supp; + u16 mcs_80_map_tx, mcs_80_map_rx; + u16 ap_min_req_set; + int mcs_nss_size; + int nss; + + he_cap_elem = cfg80211_find_ext_elem(WLAN_EID_EXT_HE_CAPABILITY, + ies->data, ies->len); + + if (!he_cap_elem) + return false; + + /* invalid HE IE */ + if (he_cap_elem->datalen < 1 + sizeof(*he_cap)) { + sdata_info(sdata, + "Invalid HE elem, Disable HE\n"); + return false; + } + + /* skip one byte ext_tag_id */ + he_cap = (void *)(he_cap_elem->data + 1); + mcs_nss_size = ieee80211_he_mcs_nss_size(he_cap); + + /* invalid HE IE */ + if (he_cap_elem->datalen < 1 + sizeof(*he_cap) + mcs_nss_size) { + sdata_info(sdata, + "Invalid HE elem with nss size, Disable HE\n"); + return false; + } + + /* mcs_nss is right after he_cap info */ + he_mcs_nss_supp = (void *)(he_cap + 1); + + mcs_80_map_tx = le16_to_cpu(he_mcs_nss_supp->tx_mcs_80); + mcs_80_map_rx = le16_to_cpu(he_mcs_nss_supp->rx_mcs_80); + + /* P802.11-REVme/D0.3 + * 27.1.1 Introduction to the HE PHY + * ... + * An HE STA shall support the following features: + * ... + * Single spatial stream HE-MCSs 0 to 7 (transmit and receive) in all + * supported channel widths for HE SU PPDUs + */ + if ((mcs_80_map_tx & 0x3) == IEEE80211_HE_MCS_NOT_SUPPORTED || + (mcs_80_map_rx & 0x3) == IEEE80211_HE_MCS_NOT_SUPPORTED) { + sdata_info(sdata, + "Missing mandatory rates for 1 Nss, rx 0x%x, tx 0x%x, disable HE\n", + mcs_80_map_tx, mcs_80_map_rx); + return false; + } + + if (!he_op) + return true; + + ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set); + + /* + * Apparently iPhone 13 (at least iOS version 15.3.1) sets this to all + * zeroes, which is nonsense, and completely inconsistent with itself + * (it doesn't have 8 streams). Accept the settings in this case anyway. + */ + if (!ap_min_req_set) + return true; + + /* make sure the AP is consistent with itself + * + * P802.11-REVme/D0.3 + * 26.17.1 Basic HE BSS operation + * + * A STA that is operating in an HE BSS shall be able to receive and + * transmit at each of the <HE-MCS, NSS> tuple values indicated by the + * Basic HE-MCS And NSS Set field of the HE Operation parameter of the + * MLME-START.request primitive and shall be able to receive at each of + * the <HE-MCS, NSS> tuple values indicated by the Supported HE-MCS and + * NSS Set field in the HE Capabilities parameter of the MLMESTART.request + * primitive + */ + for (nss = 8; nss > 0; nss--) { + u8 ap_op_val = (ap_min_req_set >> (2 * (nss - 1))) & 3; + u8 ap_rx_val; + u8 ap_tx_val; + + if (ap_op_val == IEEE80211_HE_MCS_NOT_SUPPORTED) + continue; + + ap_rx_val = (mcs_80_map_rx >> (2 * (nss - 1))) & 3; + ap_tx_val = (mcs_80_map_tx >> (2 * (nss - 1))) & 3; + + if (ap_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || + ap_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || + ap_rx_val < ap_op_val || ap_tx_val < ap_op_val) { + sdata_info(sdata, + "Invalid rates for %d Nss, rx %d, tx %d oper %d, disable HE\n", + nss, ap_rx_val, ap_rx_val, ap_op_val); + return false; + } + } + + return true; +} + +static bool +ieee80211_verify_sta_he_mcs_support(struct ieee80211_sub_if_data *sdata, + struct ieee80211_supported_band *sband, + const struct ieee80211_he_operation *he_op) +{ + const struct ieee80211_sta_he_cap *sta_he_cap = + ieee80211_get_he_iftype_cap(sband, + ieee80211_vif_type_p2p(&sdata->vif)); + u16 ap_min_req_set; + int i; + + if (!sta_he_cap || !he_op) + return false; + + ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set); + + /* + * Apparently iPhone 13 (at least iOS version 15.3.1) sets this to all + * zeroes, which is nonsense, and completely inconsistent with itself + * (it doesn't have 8 streams). Accept the settings in this case anyway. + */ + if (!ap_min_req_set) + return true; + + /* Need to go over for 80MHz, 160MHz and for 80+80 */ + for (i = 0; i < 3; i++) { + const struct ieee80211_he_mcs_nss_supp *sta_mcs_nss_supp = + &sta_he_cap->he_mcs_nss_supp; + u16 sta_mcs_map_rx = + le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i]); + u16 sta_mcs_map_tx = + le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i + 1]); + u8 nss; + bool verified = true; + + /* + * For each band there is a maximum of 8 spatial streams + * possible. Each of the sta_mcs_map_* is a 16-bit struct built + * of 2 bits per NSS (1-8), with the values defined in enum + * ieee80211_he_mcs_support. Need to make sure STA TX and RX + * capabilities aren't less than the AP's minimum requirements + * for this HE BSS per SS. + * It is enough to find one such band that meets the reqs. + */ + for (nss = 8; nss > 0; nss--) { + u8 sta_rx_val = (sta_mcs_map_rx >> (2 * (nss - 1))) & 3; + u8 sta_tx_val = (sta_mcs_map_tx >> (2 * (nss - 1))) & 3; + u8 ap_val = (ap_min_req_set >> (2 * (nss - 1))) & 3; + + if (ap_val == IEEE80211_HE_MCS_NOT_SUPPORTED) + continue; + + /* + * Make sure the HE AP doesn't require MCSs that aren't + * supported by the client as required by spec + * + * P802.11-REVme/D0.3 + * 26.17.1 Basic HE BSS operation + * + * An HE STA shall not attempt to join * (MLME-JOIN.request primitive) + * a BSS, unless it supports (i.e., is able to both transmit and + * receive using) all of the <HE-MCS, NSS> tuples in the basic + * HE-MCS and NSS set. + */ + if (sta_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || + sta_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || + (ap_val > sta_rx_val) || (ap_val > sta_tx_val)) { + verified = false; + break; + } + } + + if (verified) + return true; + } + + /* If here, STA doesn't meet AP's HE min requirements */ + return false; +} + +static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, + struct ieee80211_link_data *link, + struct cfg80211_bss *cbss, + ieee80211_conn_flags_t *conn_flags) +{ + struct ieee80211_local *local = sdata->local; + const struct ieee80211_ht_cap *ht_cap = NULL; + const struct ieee80211_ht_operation *ht_oper = NULL; + const struct ieee80211_vht_operation *vht_oper = NULL; + const struct ieee80211_he_operation *he_oper = NULL; + const struct ieee80211_eht_operation *eht_oper = NULL; + const struct ieee80211_s1g_oper_ie *s1g_oper = NULL; + struct ieee80211_supported_band *sband; + struct cfg80211_chan_def chandef; + bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ; + bool is_5ghz = cbss->channel->band == NL80211_BAND_5GHZ; + struct ieee80211_bss *bss = (void *)cbss->priv; + struct ieee80211_elems_parse_params parse_params = { + .bss = cbss, + .link_id = -1, + .from_ap = true, + }; + struct ieee802_11_elems *elems; + const struct cfg80211_bss_ies *ies; + int ret; + u32 i; + bool have_80mhz; + + rcu_read_lock(); + + ies = rcu_dereference(cbss->ies); + parse_params.start = ies->data; + parse_params.len = ies->len; + elems = ieee802_11_parse_elems_full(&parse_params); + if (!elems) { + rcu_read_unlock(); + return -ENOMEM; + } + + sband = local->hw.wiphy->bands[cbss->channel->band]; + + *conn_flags &= ~(IEEE80211_CONN_DISABLE_40MHZ | + IEEE80211_CONN_DISABLE_80P80MHZ | + IEEE80211_CONN_DISABLE_160MHZ); + + /* disable HT/VHT/HE if we don't support them */ + if (!sband->ht_cap.ht_supported && !is_6ghz) { + mlme_dbg(sdata, "HT not supported, disabling HT/VHT/HE/EHT\n"); + *conn_flags |= IEEE80211_CONN_DISABLE_HT; + *conn_flags |= IEEE80211_CONN_DISABLE_VHT; + *conn_flags |= IEEE80211_CONN_DISABLE_HE; + *conn_flags |= IEEE80211_CONN_DISABLE_EHT; + } + + if (!sband->vht_cap.vht_supported && is_5ghz) { + mlme_dbg(sdata, "VHT not supported, disabling VHT/HE/EHT\n"); + *conn_flags |= IEEE80211_CONN_DISABLE_VHT; + *conn_flags |= IEEE80211_CONN_DISABLE_HE; + *conn_flags |= IEEE80211_CONN_DISABLE_EHT; + } + + if (!ieee80211_get_he_iftype_cap(sband, + ieee80211_vif_type_p2p(&sdata->vif))) { + mlme_dbg(sdata, "HE not supported, disabling HE and EHT\n"); + *conn_flags |= IEEE80211_CONN_DISABLE_HE; + *conn_flags |= IEEE80211_CONN_DISABLE_EHT; + } + + if (!ieee80211_get_eht_iftype_cap(sband, + ieee80211_vif_type_p2p(&sdata->vif))) { + mlme_dbg(sdata, "EHT not supported, disabling EHT\n"); + *conn_flags |= IEEE80211_CONN_DISABLE_EHT; + } + + if (!(*conn_flags & IEEE80211_CONN_DISABLE_HT) && !is_6ghz) { + ht_oper = elems->ht_operation; + ht_cap = elems->ht_cap_elem; + + if (!ht_cap) { + *conn_flags |= IEEE80211_CONN_DISABLE_HT; + ht_oper = NULL; + } + } + + if (!(*conn_flags & IEEE80211_CONN_DISABLE_VHT) && !is_6ghz) { + vht_oper = elems->vht_operation; + if (vht_oper && !ht_oper) { + vht_oper = NULL; + sdata_info(sdata, + "AP advertised VHT without HT, disabling HT/VHT/HE\n"); + *conn_flags |= IEEE80211_CONN_DISABLE_HT; + *conn_flags |= IEEE80211_CONN_DISABLE_VHT; + *conn_flags |= IEEE80211_CONN_DISABLE_HE; + *conn_flags |= IEEE80211_CONN_DISABLE_EHT; + } + + if (!elems->vht_cap_elem) { + *conn_flags |= IEEE80211_CONN_DISABLE_VHT; + vht_oper = NULL; + } + } + + if (!(*conn_flags & IEEE80211_CONN_DISABLE_HE)) { + he_oper = elems->he_operation; + + if (link && is_6ghz) { + struct ieee80211_bss_conf *bss_conf; + u8 j = 0; + + bss_conf = link->conf; + + if (elems->pwr_constr_elem) + bss_conf->pwr_reduction = *elems->pwr_constr_elem; + + BUILD_BUG_ON(ARRAY_SIZE(bss_conf->tx_pwr_env) != + ARRAY_SIZE(elems->tx_pwr_env)); + + for (i = 0; i < elems->tx_pwr_env_num; i++) { + if (elems->tx_pwr_env_len[i] > + sizeof(bss_conf->tx_pwr_env[j])) + continue; + + bss_conf->tx_pwr_env_num++; + memcpy(&bss_conf->tx_pwr_env[j], elems->tx_pwr_env[i], + elems->tx_pwr_env_len[i]); + j++; + } + } + + if (!ieee80211_verify_peer_he_mcs_support(sdata, ies, he_oper) || + !ieee80211_verify_sta_he_mcs_support(sdata, sband, he_oper)) + *conn_flags |= IEEE80211_CONN_DISABLE_HE | + IEEE80211_CONN_DISABLE_EHT; + } + + /* + * EHT requires HE to be supported as well. Specifically for 6 GHz + * channels, the operation channel information can only be deduced from + * both the 6 GHz operation information (from the HE operation IE) and + * EHT operation. + */ + if (!(*conn_flags & + (IEEE80211_CONN_DISABLE_HE | + IEEE80211_CONN_DISABLE_EHT)) && + he_oper) { + const struct cfg80211_bss_ies *cbss_ies; + const u8 *eht_oper_ie; + + cbss_ies = rcu_dereference(cbss->ies); + eht_oper_ie = cfg80211_find_ext_ie(WLAN_EID_EXT_EHT_OPERATION, + cbss_ies->data, cbss_ies->len); + if (eht_oper_ie && eht_oper_ie[1] >= + 1 + sizeof(struct ieee80211_eht_operation)) + eht_oper = (void *)(eht_oper_ie + 3); + else + eht_oper = NULL; + } + + /* Allow VHT if at least one channel on the sband supports 80 MHz */ + have_80mhz = false; + for (i = 0; i < sband->n_channels; i++) { + if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED | + IEEE80211_CHAN_NO_80MHZ)) + continue; + + have_80mhz = true; + break; + } + + if (!have_80mhz) { + sdata_info(sdata, "80 MHz not supported, disabling VHT\n"); + *conn_flags |= IEEE80211_CONN_DISABLE_VHT; + } + + if (sband->band == NL80211_BAND_S1GHZ) { + s1g_oper = elems->s1g_oper; + if (!s1g_oper) + sdata_info(sdata, + "AP missing S1G operation element?\n"); + } + + *conn_flags |= + ieee80211_determine_chantype(sdata, link, *conn_flags, + sband, + cbss->channel, + bss->vht_cap_info, + ht_oper, vht_oper, + he_oper, eht_oper, + s1g_oper, + &chandef, false); + + if (link) + link->needed_rx_chains = + min(ieee80211_max_rx_chains(link, cbss), + local->rx_chains); + + rcu_read_unlock(); + /* the element data was RCU protected so no longer valid anyway */ + kfree(elems); + elems = NULL; + + if (*conn_flags & IEEE80211_CONN_DISABLE_HE && is_6ghz) { + sdata_info(sdata, "Rejecting non-HE 6/7 GHz connection"); + return -EINVAL; + } + + if (!link) + return 0; + + /* will change later if needed */ + link->smps_mode = IEEE80211_SMPS_OFF; + + mutex_lock(&local->mtx); + /* + * If this fails (possibly due to channel context sharing + * on incompatible channels, e.g. 80+80 and 160 sharing the + * same control channel) try to use a smaller bandwidth. + */ + ret = ieee80211_link_use_channel(link, &chandef, + IEEE80211_CHANCTX_SHARED); + + /* don't downgrade for 5 and 10 MHz channels, though. */ + if (chandef.width == NL80211_CHAN_WIDTH_5 || + chandef.width == NL80211_CHAN_WIDTH_10) + goto out; + + while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) { + *conn_flags |= + ieee80211_chandef_downgrade(&chandef); + ret = ieee80211_link_use_channel(link, &chandef, + IEEE80211_CHANCTX_SHARED); + } + out: + mutex_unlock(&local->mtx); + return ret; +} + +static bool ieee80211_get_dtim(const struct cfg80211_bss_ies *ies, + u8 *dtim_count, u8 *dtim_period) +{ + const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, ies->data, ies->len); + const u8 *idx_ie = cfg80211_find_ie(WLAN_EID_MULTI_BSSID_IDX, ies->data, + ies->len); + const struct ieee80211_tim_ie *tim = NULL; + const struct ieee80211_bssid_index *idx; + bool valid = tim_ie && tim_ie[1] >= 2; + + if (valid) + tim = (void *)(tim_ie + 2); + + if (dtim_count) + *dtim_count = valid ? tim->dtim_count : 0; + + if (dtim_period) + *dtim_period = valid ? tim->dtim_period : 0; + + /* Check if value is overridden by non-transmitted profile */ + if (!idx_ie || idx_ie[1] < 3) + return valid; + + idx = (void *)(idx_ie + 2); + + if (dtim_count) + *dtim_count = idx->dtim_count; + + if (dtim_period) + *dtim_period = idx->dtim_period; + + return true; +} + +static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, + struct ieee802_11_elems *elems, + const u8 *elem_start, unsigned int elem_len) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; + struct ieee80211_local *local = sdata->local; + unsigned int link_id; + struct sta_info *sta; + u64 changed[IEEE80211_MLD_MAX_NUM_LINKS] = {}; + int err; + + mutex_lock(&sdata->local->sta_mtx); + /* + * station info was already allocated and inserted before + * the association and should be available to us + */ + sta = sta_info_get(sdata, assoc_data->ap_addr); + if (WARN_ON(!sta)) + goto out_err; + + if (sdata->vif.valid_links) { + u16 valid_links = 0; + + for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) { + if (!assoc_data->link[link_id].bss) + continue; + valid_links |= BIT(link_id); + + if (link_id != assoc_data->assoc_link_id) { + err = ieee80211_sta_allocate_link(sta, link_id); + if (err) + goto out_err; + } + } + + ieee80211_vif_set_links(sdata, valid_links); + } + + for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) { + struct ieee80211_link_data *link; + struct link_sta_info *link_sta; + + if (!assoc_data->link[link_id].bss) + continue; + + link = sdata_dereference(sdata->link[link_id], sdata); + if (WARN_ON(!link)) + goto out_err; + + if (sdata->vif.valid_links) + link_info(link, + "local address %pM, AP link address %pM\n", + link->conf->addr, + assoc_data->link[link_id].bss->bssid); + + link_sta = rcu_dereference_protected(sta->link[link_id], + lockdep_is_held(&local->sta_mtx)); + if (WARN_ON(!link_sta)) + goto out_err; + + if (link_id != assoc_data->assoc_link_id) { + struct cfg80211_bss *cbss = assoc_data->link[link_id].bss; + const struct cfg80211_bss_ies *ies; + + rcu_read_lock(); + ies = rcu_dereference(cbss->ies); + ieee80211_get_dtim(ies, + &link->conf->sync_dtim_count, + &link->u.mgd.dtim_period); + link->conf->dtim_period = link->u.mgd.dtim_period ?: 1; + link->conf->beacon_int = cbss->beacon_interval; + rcu_read_unlock(); + + err = ieee80211_prep_channel(sdata, link, cbss, + &link->u.mgd.conn_flags); + if (err) { + link_info(link, "prep_channel failed\n"); + goto out_err; + } + } + + err = ieee80211_mgd_setup_link_sta(link, sta, link_sta, + assoc_data->link[link_id].bss); + if (err) + goto out_err; + + if (!ieee80211_assoc_config_link(link, link_sta, + assoc_data->link[link_id].bss, + mgmt, elem_start, elem_len, + &changed[link_id])) + goto out_err; + + if (link_id != assoc_data->assoc_link_id) { + err = ieee80211_sta_activate_link(sta, link_id); + if (err) + goto out_err; + } + } + + rate_control_rate_init(sta); + + if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) { + set_sta_flag(sta, WLAN_STA_MFP); + sta->sta.mfp = true; + } else { + sta->sta.mfp = false; + } + + ieee80211_sta_set_max_amsdu_subframes(sta, elems->ext_capab, + elems->ext_capab_len); + + sta->sta.wme = (elems->wmm_param || elems->s1g_capab) && + local->hw.queues >= IEEE80211_NUM_ACS; + + err = sta_info_move_state(sta, IEEE80211_STA_ASSOC); + if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT)) + err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); + if (err) { + sdata_info(sdata, + "failed to move station %pM to desired state\n", + sta->sta.addr); + WARN_ON(__sta_info_destroy(sta)); + goto out_err; + } + + if (sdata->wdev.use_4addr) + drv_sta_set_4addr(local, sdata, &sta->sta, true); + + mutex_unlock(&sdata->local->sta_mtx); + + ieee80211_set_associated(sdata, assoc_data, changed); + + /* + * If we're using 4-addr mode, let the AP know that we're + * doing so, so that it can create the STA VLAN on its side + */ + if (ifmgd->use_4addr) + ieee80211_send_4addr_nullfunc(local, sdata); + + /* + * Start timer to probe the connection to the AP now. + * Also start the timer that will detect beacon loss. + */ + ieee80211_sta_reset_beacon_monitor(sdata); + ieee80211_sta_reset_conn_monitor(sdata); + + return true; +out_err: + eth_zero_addr(sdata->vif.cfg.ap_addr); + mutex_unlock(&sdata->local->sta_mtx); + return false; +} + +static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, + size_t len) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; + u16 capab_info, status_code, aid; + struct ieee80211_elems_parse_params parse_params = { + .bss = NULL, + .link_id = -1, + .from_ap = true, + }; + struct ieee802_11_elems *elems; + int ac; + const u8 *elem_start; + unsigned int elem_len; + bool reassoc; + struct ieee80211_event event = { + .type = MLME_EVENT, + .u.mlme.data = ASSOC_EVENT, + }; + struct ieee80211_prep_tx_info info = {}; + struct cfg80211_rx_assoc_resp resp = { + .uapsd_queues = -1, + }; + u8 ap_mld_addr[ETH_ALEN] __aligned(2); + unsigned int link_id; + + sdata_assert_lock(sdata); + + if (!assoc_data) + return; + + if (!ether_addr_equal(assoc_data->ap_addr, mgmt->bssid) || + !ether_addr_equal(assoc_data->ap_addr, mgmt->sa)) + return; + + /* + * AssocResp and ReassocResp have identical structure, so process both + * of them in this function. + */ + + if (len < 24 + 6) + return; + + reassoc = ieee80211_is_reassoc_resp(mgmt->frame_control); + capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); + status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code); + if (assoc_data->s1g) + elem_start = mgmt->u.s1g_assoc_resp.variable; + else + elem_start = mgmt->u.assoc_resp.variable; + + /* + * Note: this may not be perfect, AP might misbehave - if + * anyone needs to rely on perfect complete notification + * with the exact right subtype, then we need to track what + * we actually transmitted. + */ + info.subtype = reassoc ? IEEE80211_STYPE_REASSOC_REQ : + IEEE80211_STYPE_ASSOC_REQ; + + if (assoc_data->fils_kek_len && + fils_decrypt_assoc_resp(sdata, (u8 *)mgmt, &len, assoc_data) < 0) + return; + + elem_len = len - (elem_start - (u8 *)mgmt); + parse_params.start = elem_start; + parse_params.len = elem_len; + elems = ieee802_11_parse_elems_full(&parse_params); + if (!elems) + goto notify_driver; + + if (elems->aid_resp) + aid = le16_to_cpu(elems->aid_resp->aid); + else if (assoc_data->s1g) + aid = 0; /* TODO */ + else + aid = le16_to_cpu(mgmt->u.assoc_resp.aid); + + /* + * The 5 MSB of the AID field are reserved + * (802.11-2016 9.4.1.8 AID field) + */ + aid &= 0x7ff; + + sdata_info(sdata, + "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n", + reassoc ? "Rea" : "A", assoc_data->ap_addr, + capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14)))); + + ifmgd->broken_ap = false; + + if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY && + elems->timeout_int && + elems->timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) { + u32 tu, ms; + + cfg80211_assoc_comeback(sdata->dev, assoc_data->ap_addr, + le32_to_cpu(elems->timeout_int->value)); + + tu = le32_to_cpu(elems->timeout_int->value); + ms = tu * 1024 / 1000; + sdata_info(sdata, + "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n", + assoc_data->ap_addr, tu, ms); + assoc_data->timeout = jiffies + msecs_to_jiffies(ms); + assoc_data->timeout_started = true; + if (ms > IEEE80211_ASSOC_TIMEOUT) + run_again(sdata, assoc_data->timeout); + goto notify_driver; + } + + if (status_code != WLAN_STATUS_SUCCESS) { + sdata_info(sdata, "%pM denied association (code=%d)\n", + assoc_data->ap_addr, status_code); + event.u.mlme.status = MLME_DENIED; + event.u.mlme.reason = status_code; + drv_event_callback(sdata->local, sdata, &event); + } else { + if (aid == 0 || aid > IEEE80211_MAX_AID) { + sdata_info(sdata, + "invalid AID value %d (out of range), turn off PS\n", + aid); + aid = 0; + ifmgd->broken_ap = true; + } + + if (sdata->vif.valid_links) { + if (!elems->multi_link) { + sdata_info(sdata, + "MLO association with %pM but no multi-link element in response!\n", + assoc_data->ap_addr); + goto abandon_assoc; + } + + if (le16_get_bits(elems->multi_link->control, + IEEE80211_ML_CONTROL_TYPE) != + IEEE80211_ML_CONTROL_TYPE_BASIC) { + sdata_info(sdata, + "bad multi-link element (control=0x%x)\n", + le16_to_cpu(elems->multi_link->control)); + goto abandon_assoc; + } else { + struct ieee80211_mle_basic_common_info *common; + + common = (void *)elems->multi_link->variable; + + if (memcmp(assoc_data->ap_addr, + common->mld_mac_addr, ETH_ALEN)) { + sdata_info(sdata, + "AP MLD MAC address mismatch: got %pM expected %pM\n", + common->mld_mac_addr, + assoc_data->ap_addr); + goto abandon_assoc; + } + } + } + + sdata->vif.cfg.aid = aid; + + if (!ieee80211_assoc_success(sdata, mgmt, elems, + elem_start, elem_len)) { + /* oops -- internal error -- send timeout for now */ + ieee80211_destroy_assoc_data(sdata, ASSOC_TIMEOUT); + goto notify_driver; + } + event.u.mlme.status = MLME_SUCCESS; + drv_event_callback(sdata->local, sdata, &event); + sdata_info(sdata, "associated\n"); + + info.success = 1; + } + + for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) { + struct ieee80211_link_data *link; + + link = sdata_dereference(sdata->link[link_id], sdata); + if (!link) + continue; + if (!assoc_data->link[link_id].bss) + continue; + resp.links[link_id].bss = assoc_data->link[link_id].bss; + resp.links[link_id].addr = link->conf->addr; + + /* get uapsd queues configuration - same for all links */ + resp.uapsd_queues = 0; + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) + if (link->tx_conf[ac].uapsd) + resp.uapsd_queues |= ieee80211_ac_to_qos_mask[ac]; + } + + if (sdata->vif.valid_links) { + ether_addr_copy(ap_mld_addr, sdata->vif.cfg.ap_addr); + resp.ap_mld_addr = ap_mld_addr; + } + + ieee80211_destroy_assoc_data(sdata, + status_code == WLAN_STATUS_SUCCESS ? + ASSOC_SUCCESS : + ASSOC_REJECTED); + + resp.buf = (u8 *)mgmt; + resp.len = len; + resp.req_ies = ifmgd->assoc_req_ies; + resp.req_ies_len = ifmgd->assoc_req_ies_len; + cfg80211_rx_assoc_resp(sdata->dev, &resp); +notify_driver: + drv_mgd_complete_tx(sdata->local, sdata, &info); + kfree(elems); + return; +abandon_assoc: + ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON); + goto notify_driver; +} + +static void ieee80211_rx_bss_info(struct ieee80211_link_data *link, + struct ieee80211_mgmt *mgmt, size_t len, + struct ieee80211_rx_status *rx_status) +{ + struct ieee80211_sub_if_data *sdata = link->sdata; + struct ieee80211_local *local = sdata->local; + struct ieee80211_bss *bss; + struct ieee80211_channel *channel; + + sdata_assert_lock(sdata); + + channel = ieee80211_get_channel_khz(local->hw.wiphy, + ieee80211_rx_status_to_khz(rx_status)); + if (!channel) + return; + + bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, channel); + if (bss) { + link->conf->beacon_rate = bss->beacon_rate; + ieee80211_rx_bss_put(local, bss); + } +} + + +static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_link_data *link, + struct sk_buff *skb) +{ + struct ieee80211_sub_if_data *sdata = link->sdata; + struct ieee80211_mgmt *mgmt = (void *)skb->data; + struct ieee80211_if_managed *ifmgd; + struct ieee80211_rx_status *rx_status = (void *) skb->cb; + struct ieee80211_channel *channel; + size_t baselen, len = skb->len; + + ifmgd = &sdata->u.mgd; + + sdata_assert_lock(sdata); + + /* + * According to Draft P802.11ax D6.0 clause 26.17.2.3.2: + * "If a 6 GHz AP receives a Probe Request frame and responds with + * a Probe Response frame [..], the Address 1 field of the Probe + * Response frame shall be set to the broadcast address [..]" + * So, on 6GHz band we should also accept broadcast responses. + */ + channel = ieee80211_get_channel(sdata->local->hw.wiphy, + rx_status->freq); + if (!channel) + return; + + if (!ether_addr_equal(mgmt->da, sdata->vif.addr) && + (channel->band != NL80211_BAND_6GHZ || + !is_broadcast_ether_addr(mgmt->da))) + return; /* ignore ProbeResp to foreign address */ + + baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; + if (baselen > len) + return; + + ieee80211_rx_bss_info(link, mgmt, len, rx_status); + + if (ifmgd->associated && + ether_addr_equal(mgmt->bssid, link->u.mgd.bssid)) + ieee80211_reset_ap_probe(sdata); +} + +/* + * This is the canonical list of information elements we care about, + * the filter code also gives us all changes to the Microsoft OUI + * (00:50:F2) vendor IE which is used for WMM which we need to track, + * as well as the DTPC IE (part of the Cisco OUI) used for signaling + * changes to requested client power. + * + * We implement beacon filtering in software since that means we can + * avoid processing the frame here and in cfg80211, and userspace + * will not be able to tell whether the hardware supports it or not. + * + * XXX: This list needs to be dynamic -- userspace needs to be able to + * add items it requires. It also needs to be able to tell us to + * look out for other vendor IEs. + */ +static const u64 care_about_ies = + (1ULL << WLAN_EID_COUNTRY) | + (1ULL << WLAN_EID_ERP_INFO) | + (1ULL << WLAN_EID_CHANNEL_SWITCH) | + (1ULL << WLAN_EID_PWR_CONSTRAINT) | + (1ULL << WLAN_EID_HT_CAPABILITY) | + (1ULL << WLAN_EID_HT_OPERATION) | + (1ULL << WLAN_EID_EXT_CHANSWITCH_ANN); + +static void ieee80211_handle_beacon_sig(struct ieee80211_link_data *link, + struct ieee80211_if_managed *ifmgd, + struct ieee80211_bss_conf *bss_conf, + struct ieee80211_local *local, + struct ieee80211_rx_status *rx_status) +{ + struct ieee80211_sub_if_data *sdata = link->sdata; + + /* Track average RSSI from the Beacon frames of the current AP */ + + if (!link->u.mgd.tracking_signal_avg) { + link->u.mgd.tracking_signal_avg = true; + ewma_beacon_signal_init(&link->u.mgd.ave_beacon_signal); + link->u.mgd.last_cqm_event_signal = 0; + link->u.mgd.count_beacon_signal = 1; + link->u.mgd.last_ave_beacon_signal = 0; + } else { + link->u.mgd.count_beacon_signal++; + } + + ewma_beacon_signal_add(&link->u.mgd.ave_beacon_signal, + -rx_status->signal); + + if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold && + link->u.mgd.count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) { + int sig = -ewma_beacon_signal_read(&link->u.mgd.ave_beacon_signal); + int last_sig = link->u.mgd.last_ave_beacon_signal; + struct ieee80211_event event = { + .type = RSSI_EVENT, + }; + + /* + * if signal crosses either of the boundaries, invoke callback + * with appropriate parameters + */ + if (sig > ifmgd->rssi_max_thold && + (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) { + link->u.mgd.last_ave_beacon_signal = sig; + event.u.rssi.data = RSSI_EVENT_HIGH; + drv_event_callback(local, sdata, &event); + } else if (sig < ifmgd->rssi_min_thold && + (last_sig >= ifmgd->rssi_max_thold || + last_sig == 0)) { + link->u.mgd.last_ave_beacon_signal = sig; + event.u.rssi.data = RSSI_EVENT_LOW; + drv_event_callback(local, sdata, &event); + } + } + + if (bss_conf->cqm_rssi_thold && + link->u.mgd.count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT && + !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) { + int sig = -ewma_beacon_signal_read(&link->u.mgd.ave_beacon_signal); + int last_event = link->u.mgd.last_cqm_event_signal; + int thold = bss_conf->cqm_rssi_thold; + int hyst = bss_conf->cqm_rssi_hyst; + + if (sig < thold && + (last_event == 0 || sig < last_event - hyst)) { + link->u.mgd.last_cqm_event_signal = sig; + ieee80211_cqm_rssi_notify( + &sdata->vif, + NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, + sig, GFP_KERNEL); + } else if (sig > thold && + (last_event == 0 || sig > last_event + hyst)) { + link->u.mgd.last_cqm_event_signal = sig; + ieee80211_cqm_rssi_notify( + &sdata->vif, + NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, + sig, GFP_KERNEL); + } + } + + if (bss_conf->cqm_rssi_low && + link->u.mgd.count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) { + int sig = -ewma_beacon_signal_read(&link->u.mgd.ave_beacon_signal); + int last_event = link->u.mgd.last_cqm_event_signal; + int low = bss_conf->cqm_rssi_low; + int high = bss_conf->cqm_rssi_high; + + if (sig < low && + (last_event == 0 || last_event >= low)) { + link->u.mgd.last_cqm_event_signal = sig; + ieee80211_cqm_rssi_notify( + &sdata->vif, + NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, + sig, GFP_KERNEL); + } else if (sig > high && + (last_event == 0 || last_event <= high)) { + link->u.mgd.last_cqm_event_signal = sig; + ieee80211_cqm_rssi_notify( + &sdata->vif, + NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, + sig, GFP_KERNEL); + } + } +} + +static bool ieee80211_rx_our_beacon(const u8 *tx_bssid, + struct cfg80211_bss *bss) +{ + if (ether_addr_equal(tx_bssid, bss->bssid)) + return true; + if (!bss->transmitted_bss) + return false; + return ether_addr_equal(tx_bssid, bss->transmitted_bss->bssid); +} + +static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link, + struct ieee80211_hdr *hdr, size_t len, + struct ieee80211_rx_status *rx_status) +{ + struct ieee80211_sub_if_data *sdata = link->sdata; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; + struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg; + struct ieee80211_mgmt *mgmt = (void *) hdr; + size_t baselen; + struct ieee802_11_elems *elems; + struct ieee80211_local *local = sdata->local; + struct ieee80211_chanctx_conf *chanctx_conf; + struct ieee80211_channel *chan; + struct link_sta_info *link_sta; + struct sta_info *sta; + u32 changed = 0; + bool erp_valid; + u8 erp_value = 0; + u32 ncrc = 0; + u8 *bssid, *variable = mgmt->u.beacon.variable; + u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN]; + struct ieee80211_elems_parse_params parse_params = { + .link_id = -1, + .from_ap = true, + }; + + sdata_assert_lock(sdata); + + /* Process beacon from the current BSS */ + bssid = ieee80211_get_bssid(hdr, len, sdata->vif.type); + if (ieee80211_is_s1g_beacon(mgmt->frame_control)) { + struct ieee80211_ext *ext = (void *) mgmt; + + if (ieee80211_is_s1g_short_beacon(ext->frame_control)) + variable = ext->u.s1g_short_beacon.variable; + else + variable = ext->u.s1g_beacon.variable; + } + + baselen = (u8 *) variable - (u8 *) mgmt; + if (baselen > len) + return; + + parse_params.start = variable; + parse_params.len = len - baselen; + + rcu_read_lock(); + chanctx_conf = rcu_dereference(link->conf->chanctx_conf); + if (!chanctx_conf) { + rcu_read_unlock(); + return; + } + + if (ieee80211_rx_status_to_khz(rx_status) != + ieee80211_channel_to_khz(chanctx_conf->def.chan)) { + rcu_read_unlock(); + return; + } + chan = chanctx_conf->def.chan; + rcu_read_unlock(); + + if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon && + !WARN_ON(sdata->vif.valid_links) && + ieee80211_rx_our_beacon(bssid, ifmgd->assoc_data->link[0].bss)) { + parse_params.bss = ifmgd->assoc_data->link[0].bss; + elems = ieee802_11_parse_elems_full(&parse_params); + if (!elems) + return; + + ieee80211_rx_bss_info(link, mgmt, len, rx_status); + + if (elems->dtim_period) + link->u.mgd.dtim_period = elems->dtim_period; + link->u.mgd.have_beacon = true; + ifmgd->assoc_data->need_beacon = false; + if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) { + link->conf->sync_tsf = + le64_to_cpu(mgmt->u.beacon.timestamp); + link->conf->sync_device_ts = + rx_status->device_timestamp; + link->conf->sync_dtim_count = elems->dtim_count; + } + + if (elems->mbssid_config_ie) + bss_conf->profile_periodicity = + elems->mbssid_config_ie->profile_periodicity; + else + bss_conf->profile_periodicity = 0; + + if (elems->ext_capab_len >= 11 && + (elems->ext_capab[10] & WLAN_EXT_CAPA11_EMA_SUPPORT)) + bss_conf->ema_ap = true; + else + bss_conf->ema_ap = false; + + /* continue assoc process */ + ifmgd->assoc_data->timeout = jiffies; + ifmgd->assoc_data->timeout_started = true; + run_again(sdata, ifmgd->assoc_data->timeout); + kfree(elems); + return; + } + + if (!ifmgd->associated || + !ieee80211_rx_our_beacon(bssid, link->u.mgd.bss)) + return; + bssid = link->u.mgd.bssid; + + if (!(rx_status->flag & RX_FLAG_NO_SIGNAL_VAL)) + ieee80211_handle_beacon_sig(link, ifmgd, bss_conf, + local, rx_status); + + if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) { + mlme_dbg_ratelimited(sdata, + "cancelling AP probe due to a received beacon\n"); + ieee80211_reset_ap_probe(sdata); + } + + /* + * Push the beacon loss detection into the future since + * we are processing a beacon from the AP just now. + */ + ieee80211_sta_reset_beacon_monitor(sdata); + + /* TODO: CRC urrently not calculated on S1G Beacon Compatibility + * element (which carries the beacon interval). Don't forget to add a + * bit to care_about_ies[] above if mac80211 is interested in a + * changing S1G element. + */ + if (!ieee80211_is_s1g_beacon(hdr->frame_control)) + ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4); + parse_params.bss = link->u.mgd.bss; + parse_params.filter = care_about_ies; + parse_params.crc = ncrc; + elems = ieee802_11_parse_elems_full(&parse_params); + if (!elems) + return; + ncrc = elems->crc; + + if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && + ieee80211_check_tim(elems->tim, elems->tim_len, vif_cfg->aid)) { + if (local->hw.conf.dynamic_ps_timeout > 0) { + if (local->hw.conf.flags & IEEE80211_CONF_PS) { + local->hw.conf.flags &= ~IEEE80211_CONF_PS; + ieee80211_hw_config(local, + IEEE80211_CONF_CHANGE_PS); + } + ieee80211_send_nullfunc(local, sdata, false); + } else if (!local->pspolling && sdata->u.mgd.powersave) { + local->pspolling = true; + + /* + * Here is assumed that the driver will be + * able to send ps-poll frame and receive a + * response even though power save mode is + * enabled, but some drivers might require + * to disable power save here. This needs + * to be investigated. + */ + ieee80211_send_pspoll(local, sdata); + } + } + + if (sdata->vif.p2p || + sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) { + struct ieee80211_p2p_noa_attr noa = {}; + int ret; + + ret = cfg80211_get_p2p_attr(variable, + len - baselen, + IEEE80211_P2P_ATTR_ABSENCE_NOTICE, + (u8 *) &noa, sizeof(noa)); + if (ret >= 2) { + if (link->u.mgd.p2p_noa_index != noa.index) { + /* valid noa_attr and index changed */ + link->u.mgd.p2p_noa_index = noa.index; + memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa)); + changed |= BSS_CHANGED_P2P_PS; + /* + * make sure we update all information, the CRC + * mechanism doesn't look at P2P attributes. + */ + link->u.mgd.beacon_crc_valid = false; + } + } else if (link->u.mgd.p2p_noa_index != -1) { + /* noa_attr not found and we had valid noa_attr before */ + link->u.mgd.p2p_noa_index = -1; + memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr)); + changed |= BSS_CHANGED_P2P_PS; + link->u.mgd.beacon_crc_valid = false; + } + } + + if (link->u.mgd.csa_waiting_bcn) + ieee80211_chswitch_post_beacon(link); + + /* + * Update beacon timing and dtim count on every beacon appearance. This + * will allow the driver to use the most updated values. Do it before + * comparing this one with last received beacon. + * IMPORTANT: These parameters would possibly be out of sync by the time + * the driver will use them. The synchronized view is currently + * guaranteed only in certain callbacks. + */ + if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY) && + !ieee80211_is_s1g_beacon(hdr->frame_control)) { + link->conf->sync_tsf = + le64_to_cpu(mgmt->u.beacon.timestamp); + link->conf->sync_device_ts = + rx_status->device_timestamp; + link->conf->sync_dtim_count = elems->dtim_count; + } + + if ((ncrc == link->u.mgd.beacon_crc && link->u.mgd.beacon_crc_valid) || + ieee80211_is_s1g_short_beacon(mgmt->frame_control)) + goto free; + link->u.mgd.beacon_crc = ncrc; + link->u.mgd.beacon_crc_valid = true; + + ieee80211_rx_bss_info(link, mgmt, len, rx_status); + + ieee80211_sta_process_chanswitch(link, rx_status->mactime, + rx_status->device_timestamp, + elems, true); + + if (!link->u.mgd.disable_wmm_tracking && + ieee80211_sta_wmm_params(local, link, elems->wmm_param, + elems->wmm_param_len, + elems->mu_edca_param_set)) + changed |= BSS_CHANGED_QOS; + + /* + * If we haven't had a beacon before, tell the driver about the + * DTIM period (and beacon timing if desired) now. + */ + if (!link->u.mgd.have_beacon) { + /* a few bogus AP send dtim_period = 0 or no TIM IE */ + bss_conf->dtim_period = elems->dtim_period ?: 1; + + changed |= BSS_CHANGED_BEACON_INFO; + link->u.mgd.have_beacon = true; + + mutex_lock(&local->iflist_mtx); + ieee80211_recalc_ps(local); + mutex_unlock(&local->iflist_mtx); + + ieee80211_recalc_ps_vif(sdata); + } + + if (elems->erp_info) { + erp_valid = true; + erp_value = elems->erp_info[0]; + } else { + erp_valid = false; + } + + if (!ieee80211_is_s1g_beacon(hdr->frame_control)) + changed |= ieee80211_handle_bss_capability(link, + le16_to_cpu(mgmt->u.beacon.capab_info), + erp_valid, erp_value); + + mutex_lock(&local->sta_mtx); + sta = sta_info_get(sdata, sdata->vif.cfg.ap_addr); + if (WARN_ON(!sta)) { + mutex_unlock(&local->sta_mtx); + goto free; + } + link_sta = rcu_dereference_protected(sta->link[link->link_id], + lockdep_is_held(&local->sta_mtx)); + if (WARN_ON(!link_sta)) { + mutex_unlock(&local->sta_mtx); + goto free; + } + + changed |= ieee80211_recalc_twt_req(link, link_sta, elems); + + if (ieee80211_config_bw(link, elems->ht_cap_elem, + elems->vht_cap_elem, elems->ht_operation, + elems->vht_operation, elems->he_operation, + elems->eht_operation, + elems->s1g_oper, bssid, &changed)) { + mutex_unlock(&local->sta_mtx); + sdata_info(sdata, + "failed to follow AP %pM bandwidth change, disconnect\n", + bssid); + ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, + WLAN_REASON_DEAUTH_LEAVING, + true, deauth_buf); + ieee80211_report_disconnect(sdata, deauth_buf, + sizeof(deauth_buf), true, + WLAN_REASON_DEAUTH_LEAVING, + false); + goto free; + } + + if (sta && elems->opmode_notif) + ieee80211_vht_handle_opmode(sdata, link_sta, + *elems->opmode_notif, + rx_status->band); + mutex_unlock(&local->sta_mtx); + + changed |= ieee80211_handle_pwr_constr(link, chan, mgmt, + elems->country_elem, + elems->country_elem_len, + elems->pwr_constr_elem, + elems->cisco_dtpc_elem); + + ieee80211_link_info_change_notify(sdata, link, changed); +free: + kfree(elems); +} + +void ieee80211_sta_rx_queued_ext(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb) +{ + struct ieee80211_link_data *link = &sdata->deflink; + struct ieee80211_rx_status *rx_status; + struct ieee80211_hdr *hdr; + u16 fc; + + rx_status = (struct ieee80211_rx_status *) skb->cb; + hdr = (struct ieee80211_hdr *) skb->data; + fc = le16_to_cpu(hdr->frame_control); + + sdata_lock(sdata); + switch (fc & IEEE80211_FCTL_STYPE) { + case IEEE80211_STYPE_S1G_BEACON: + ieee80211_rx_mgmt_beacon(link, hdr, skb->len, rx_status); + break; + } + sdata_unlock(sdata); +} + +void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb) +{ + struct ieee80211_link_data *link = &sdata->deflink; + struct ieee80211_rx_status *rx_status; + struct ieee80211_mgmt *mgmt; + u16 fc; + int ies_len; + + rx_status = (struct ieee80211_rx_status *) skb->cb; + mgmt = (struct ieee80211_mgmt *) skb->data; + fc = le16_to_cpu(mgmt->frame_control); + + sdata_lock(sdata); + + if (rx_status->link_valid) { + link = sdata_dereference(sdata->link[rx_status->link_id], + sdata); + if (!link) + goto out; + } + + switch (fc & IEEE80211_FCTL_STYPE) { + case IEEE80211_STYPE_BEACON: + ieee80211_rx_mgmt_beacon(link, (void *)mgmt, + skb->len, rx_status); + break; + case IEEE80211_STYPE_PROBE_RESP: + ieee80211_rx_mgmt_probe_resp(link, skb); + break; + case IEEE80211_STYPE_AUTH: + ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len); + break; + case IEEE80211_STYPE_DEAUTH: + ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len); + break; + case IEEE80211_STYPE_DISASSOC: + ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len); + break; + case IEEE80211_STYPE_ASSOC_RESP: + case IEEE80211_STYPE_REASSOC_RESP: + ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len); + break; + case IEEE80211_STYPE_ACTION: + if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) { + struct ieee802_11_elems *elems; + + ies_len = skb->len - + offsetof(struct ieee80211_mgmt, + u.action.u.chan_switch.variable); + + if (ies_len < 0) + break; + + /* CSA IE cannot be overridden, no need for BSSID */ + elems = ieee802_11_parse_elems( + mgmt->u.action.u.chan_switch.variable, + ies_len, true, NULL); + + if (elems && !elems->parse_error) + ieee80211_sta_process_chanswitch(link, + rx_status->mactime, + rx_status->device_timestamp, + elems, false); + kfree(elems); + } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) { + struct ieee802_11_elems *elems; + + ies_len = skb->len - + offsetof(struct ieee80211_mgmt, + u.action.u.ext_chan_switch.variable); + + if (ies_len < 0) + break; + + /* + * extended CSA IE can't be overridden, no need for + * BSSID + */ + elems = ieee802_11_parse_elems( + mgmt->u.action.u.ext_chan_switch.variable, + ies_len, true, NULL); + + if (elems && !elems->parse_error) { + /* for the handling code pretend it was an IE */ + elems->ext_chansw_ie = + &mgmt->u.action.u.ext_chan_switch.data; + + ieee80211_sta_process_chanswitch(link, + rx_status->mactime, + rx_status->device_timestamp, + elems, false); + } + + kfree(elems); + } + break; + } +out: + sdata_unlock(sdata); +} + +static void ieee80211_sta_timer(struct timer_list *t) +{ + struct ieee80211_sub_if_data *sdata = + from_timer(sdata, t, u.mgd.timer); + + ieee80211_queue_work(&sdata->local->hw, &sdata->work); +} + +void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, + u8 reason, bool tx) +{ + u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; + + ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason, + tx, frame_buf); + + ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, + reason, false); +} + +static int ieee80211_auth(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data; + u32 tx_flags = 0; + u16 trans = 1; + u16 status = 0; + struct ieee80211_prep_tx_info info = { + .subtype = IEEE80211_STYPE_AUTH, + }; + + sdata_assert_lock(sdata); + + if (WARN_ON_ONCE(!auth_data)) + return -EINVAL; + + auth_data->tries++; + + if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) { + sdata_info(sdata, "authentication with %pM timed out\n", + auth_data->ap_addr); + + /* + * Most likely AP is not in the range so remove the + * bss struct for that AP. + */ + cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss); + + return -ETIMEDOUT; + } + + if (auth_data->algorithm == WLAN_AUTH_SAE) + info.duration = jiffies_to_msecs(IEEE80211_AUTH_TIMEOUT_SAE); + + drv_mgd_prepare_tx(local, sdata, &info); + + sdata_info(sdata, "send auth to %pM (try %d/%d)\n", + auth_data->ap_addr, auth_data->tries, + IEEE80211_AUTH_MAX_TRIES); + + auth_data->expected_transaction = 2; + + if (auth_data->algorithm == WLAN_AUTH_SAE) { + trans = auth_data->sae_trans; + status = auth_data->sae_status; + auth_data->expected_transaction = trans; + } + + if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) + tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | + IEEE80211_TX_INTFL_MLME_CONN_TX; + + ieee80211_send_auth(sdata, trans, auth_data->algorithm, status, + auth_data->data, auth_data->data_len, + auth_data->ap_addr, auth_data->ap_addr, + NULL, 0, 0, tx_flags); + + if (tx_flags == 0) { + if (auth_data->algorithm == WLAN_AUTH_SAE) + auth_data->timeout = jiffies + + IEEE80211_AUTH_TIMEOUT_SAE; + else + auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; + } else { + auth_data->timeout = + round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG); + } + + auth_data->timeout_started = true; + run_again(sdata, auth_data->timeout); + + return 0; +} + +static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; + struct ieee80211_local *local = sdata->local; + int ret; + + sdata_assert_lock(sdata); + + assoc_data->tries++; + if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) { + sdata_info(sdata, "association with %pM timed out\n", + assoc_data->ap_addr); + + /* + * Most likely AP is not in the range so remove the + * bss struct for that AP. + */ + cfg80211_unlink_bss(local->hw.wiphy, + assoc_data->link[assoc_data->assoc_link_id].bss); + + return -ETIMEDOUT; + } + + sdata_info(sdata, "associate with %pM (try %d/%d)\n", + assoc_data->ap_addr, assoc_data->tries, + IEEE80211_ASSOC_MAX_TRIES); + ret = ieee80211_send_assoc(sdata); + if (ret) + return ret; + + if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) { + assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; + assoc_data->timeout_started = true; + run_again(sdata, assoc_data->timeout); + } else { + assoc_data->timeout = + round_jiffies_up(jiffies + + IEEE80211_ASSOC_TIMEOUT_LONG); + assoc_data->timeout_started = true; + run_again(sdata, assoc_data->timeout); + } + + return 0; +} + +void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata, + __le16 fc, bool acked) +{ + struct ieee80211_local *local = sdata->local; + + sdata->u.mgd.status_fc = fc; + sdata->u.mgd.status_acked = acked; + sdata->u.mgd.status_received = true; + + ieee80211_queue_work(&local->hw, &sdata->work); +} + +void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + + sdata_lock(sdata); + + if (ifmgd->status_received) { + __le16 fc = ifmgd->status_fc; + bool status_acked = ifmgd->status_acked; + + ifmgd->status_received = false; + if (ifmgd->auth_data && ieee80211_is_auth(fc)) { + if (status_acked) { + if (ifmgd->auth_data->algorithm == + WLAN_AUTH_SAE) + ifmgd->auth_data->timeout = + jiffies + + IEEE80211_AUTH_TIMEOUT_SAE; + else + ifmgd->auth_data->timeout = + jiffies + + IEEE80211_AUTH_TIMEOUT_SHORT; + run_again(sdata, ifmgd->auth_data->timeout); + } else { + ifmgd->auth_data->timeout = jiffies - 1; + } + ifmgd->auth_data->timeout_started = true; + } else if (ifmgd->assoc_data && + (ieee80211_is_assoc_req(fc) || + ieee80211_is_reassoc_req(fc))) { + if (status_acked) { + ifmgd->assoc_data->timeout = + jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT; + run_again(sdata, ifmgd->assoc_data->timeout); + } else { + ifmgd->assoc_data->timeout = jiffies - 1; + } + ifmgd->assoc_data->timeout_started = true; + } + } + + if (ifmgd->auth_data && ifmgd->auth_data->timeout_started && + time_after(jiffies, ifmgd->auth_data->timeout)) { + if (ifmgd->auth_data->done || ifmgd->auth_data->waiting) { + /* + * ok ... we waited for assoc or continuation but + * userspace didn't do it, so kill the auth data + */ + ieee80211_destroy_auth_data(sdata, false); + } else if (ieee80211_auth(sdata)) { + u8 ap_addr[ETH_ALEN]; + struct ieee80211_event event = { + .type = MLME_EVENT, + .u.mlme.data = AUTH_EVENT, + .u.mlme.status = MLME_TIMEOUT, + }; + + memcpy(ap_addr, ifmgd->auth_data->ap_addr, ETH_ALEN); + + ieee80211_destroy_auth_data(sdata, false); + + cfg80211_auth_timeout(sdata->dev, ap_addr); + drv_event_callback(sdata->local, sdata, &event); + } + } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started) + run_again(sdata, ifmgd->auth_data->timeout); + + if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started && + time_after(jiffies, ifmgd->assoc_data->timeout)) { + if ((ifmgd->assoc_data->need_beacon && + !sdata->deflink.u.mgd.have_beacon) || + ieee80211_do_assoc(sdata)) { + struct ieee80211_event event = { + .type = MLME_EVENT, + .u.mlme.data = ASSOC_EVENT, + .u.mlme.status = MLME_TIMEOUT, + }; + + ieee80211_destroy_assoc_data(sdata, ASSOC_TIMEOUT); + drv_event_callback(sdata->local, sdata, &event); + } + } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started) + run_again(sdata, ifmgd->assoc_data->timeout); + + if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL && + ifmgd->associated) { + u8 *bssid = sdata->deflink.u.mgd.bssid; + int max_tries; + + if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) + max_tries = max_nullfunc_tries; + else + max_tries = max_probe_tries; + + /* ACK received for nullfunc probing frame */ + if (!ifmgd->probe_send_count) + ieee80211_reset_ap_probe(sdata); + else if (ifmgd->nullfunc_failed) { + if (ifmgd->probe_send_count < max_tries) { + mlme_dbg(sdata, + "No ack for nullfunc frame to AP %pM, try %d/%i\n", + bssid, ifmgd->probe_send_count, + max_tries); + ieee80211_mgd_probe_ap_send(sdata); + } else { + mlme_dbg(sdata, + "No ack for nullfunc frame to AP %pM, disconnecting.\n", + bssid); + ieee80211_sta_connection_lost(sdata, + WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, + false); + } + } else if (time_is_after_jiffies(ifmgd->probe_timeout)) + run_again(sdata, ifmgd->probe_timeout); + else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) { + mlme_dbg(sdata, + "Failed to send nullfunc to AP %pM after %dms, disconnecting\n", + bssid, probe_wait_ms); + ieee80211_sta_connection_lost(sdata, + WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); + } else if (ifmgd->probe_send_count < max_tries) { + mlme_dbg(sdata, + "No probe response from AP %pM after %dms, try %d/%i\n", + bssid, probe_wait_ms, + ifmgd->probe_send_count, max_tries); + ieee80211_mgd_probe_ap_send(sdata); + } else { + /* + * We actually lost the connection ... or did we? + * Let's make sure! + */ + mlme_dbg(sdata, + "No probe response from AP %pM after %dms, disconnecting.\n", + bssid, probe_wait_ms); + + ieee80211_sta_connection_lost(sdata, + WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); + } + } + + sdata_unlock(sdata); +} + +static void ieee80211_sta_bcn_mon_timer(struct timer_list *t) +{ + struct ieee80211_sub_if_data *sdata = + from_timer(sdata, t, u.mgd.bcn_mon_timer); + + if (WARN_ON(sdata->vif.valid_links)) + return; + + if (sdata->vif.bss_conf.csa_active && + !sdata->deflink.u.mgd.csa_waiting_bcn) + return; + + if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER) + return; + + sdata->u.mgd.connection_loss = false; + ieee80211_queue_work(&sdata->local->hw, + &sdata->u.mgd.beacon_connection_loss_work); +} + +static void ieee80211_sta_conn_mon_timer(struct timer_list *t) +{ + struct ieee80211_sub_if_data *sdata = + from_timer(sdata, t, u.mgd.conn_mon_timer); + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_local *local = sdata->local; + struct sta_info *sta; + unsigned long timeout; + + if (WARN_ON(sdata->vif.valid_links)) + return; + + if (sdata->vif.bss_conf.csa_active && + !sdata->deflink.u.mgd.csa_waiting_bcn) + return; + + sta = sta_info_get(sdata, sdata->vif.cfg.ap_addr); + if (!sta) + return; + + timeout = sta->deflink.status_stats.last_ack; + if (time_before(sta->deflink.status_stats.last_ack, sta->deflink.rx_stats.last_rx)) + timeout = sta->deflink.rx_stats.last_rx; + timeout += IEEE80211_CONNECTION_IDLE_TIME; + + /* If timeout is after now, then update timer to fire at + * the later date, but do not actually probe at this time. + */ + if (time_is_after_jiffies(timeout)) { + mod_timer(&ifmgd->conn_mon_timer, round_jiffies_up(timeout)); + return; + } + + ieee80211_queue_work(&local->hw, &ifmgd->monitor_work); +} + +static void ieee80211_sta_monitor_work(struct work_struct *work) +{ + struct ieee80211_sub_if_data *sdata = + container_of(work, struct ieee80211_sub_if_data, + u.mgd.monitor_work); + + ieee80211_mgd_probe_ap(sdata, false); +} + +static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata) +{ + if (sdata->vif.type == NL80211_IFTYPE_STATION) { + __ieee80211_stop_poll(sdata); + + /* let's probe the connection once */ + if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) + ieee80211_queue_work(&sdata->local->hw, + &sdata->u.mgd.monitor_work); + } +} + +#ifdef CONFIG_PM +void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; + + sdata_lock(sdata); + + if (ifmgd->auth_data || ifmgd->assoc_data) { + const u8 *ap_addr = ifmgd->auth_data ? + ifmgd->auth_data->ap_addr : + ifmgd->assoc_data->ap_addr; + + /* + * If we are trying to authenticate / associate while suspending, + * cfg80211 won't know and won't actually abort those attempts, + * thus we need to do that ourselves. + */ + ieee80211_send_deauth_disassoc(sdata, ap_addr, ap_addr, + IEEE80211_STYPE_DEAUTH, + WLAN_REASON_DEAUTH_LEAVING, + false, frame_buf); + if (ifmgd->assoc_data) + ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON); + if (ifmgd->auth_data) + ieee80211_destroy_auth_data(sdata, false); + cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf, + IEEE80211_DEAUTH_FRAME_LEN, + false); + } + + /* This is a bit of a hack - we should find a better and more generic + * solution to this. Normally when suspending, cfg80211 will in fact + * deauthenticate. However, it doesn't (and cannot) stop an ongoing + * auth (not so important) or assoc (this is the problem) process. + * + * As a consequence, it can happen that we are in the process of both + * associating and suspending, and receive an association response + * after cfg80211 has checked if it needs to disconnect, but before + * we actually set the flag to drop incoming frames. This will then + * cause the workqueue flush to process the association response in + * the suspend, resulting in a successful association just before it + * tries to remove the interface from the driver, which now though + * has a channel context assigned ... this results in issues. + * + * To work around this (for now) simply deauth here again if we're + * now connected. + */ + if (ifmgd->associated && !sdata->local->wowlan) { + u8 bssid[ETH_ALEN]; + struct cfg80211_deauth_request req = { + .reason_code = WLAN_REASON_DEAUTH_LEAVING, + .bssid = bssid, + }; + + memcpy(bssid, sdata->vif.cfg.ap_addr, ETH_ALEN); + ieee80211_mgd_deauth(sdata, &req); + } + + sdata_unlock(sdata); +} +#endif + +void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + + sdata_lock(sdata); + if (!ifmgd->associated) { + sdata_unlock(sdata); + return; + } + + if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) { + sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME; + mlme_dbg(sdata, "driver requested disconnect after resume\n"); + ieee80211_sta_connection_lost(sdata, + WLAN_REASON_UNSPECIFIED, + true); + sdata_unlock(sdata); + return; + } + + if (sdata->flags & IEEE80211_SDATA_DISCONNECT_HW_RESTART) { + sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_HW_RESTART; + mlme_dbg(sdata, "driver requested disconnect after hardware restart\n"); + ieee80211_sta_connection_lost(sdata, + WLAN_REASON_UNSPECIFIED, + true); + sdata_unlock(sdata); + return; + } + + sdata_unlock(sdata); +} + +static void ieee80211_request_smps_mgd_work(struct work_struct *work) +{ + struct ieee80211_link_data *link = + container_of(work, struct ieee80211_link_data, + u.mgd.request_smps_work); + + sdata_lock(link->sdata); + __ieee80211_request_smps_mgd(link->sdata, link, + link->u.mgd.driver_smps_mode); + sdata_unlock(link->sdata); +} + +/* interface setup */ +void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + + INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work); + INIT_WORK(&ifmgd->beacon_connection_loss_work, + ieee80211_beacon_connection_loss_work); + INIT_WORK(&ifmgd->csa_connection_drop_work, + ieee80211_csa_connection_drop_work); + INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work, + ieee80211_tdls_peer_del_work); + timer_setup(&ifmgd->timer, ieee80211_sta_timer, 0); + timer_setup(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer, 0); + timer_setup(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer, 0); + INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk, + ieee80211_sta_handle_tspec_ac_params_wk); + + ifmgd->flags = 0; + ifmgd->powersave = sdata->wdev.ps; + ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues; + ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len; + /* Setup TDLS data */ + spin_lock_init(&ifmgd->teardown_lock); + ifmgd->teardown_skb = NULL; + ifmgd->orig_teardown_skb = NULL; +} + +void ieee80211_mgd_setup_link(struct ieee80211_link_data *link) +{ + struct ieee80211_sub_if_data *sdata = link->sdata; + struct ieee80211_local *local = sdata->local; + unsigned int link_id = link->link_id; + + link->u.mgd.p2p_noa_index = -1; + link->u.mgd.conn_flags = 0; + link->conf->bssid = link->u.mgd.bssid; + + INIT_WORK(&link->u.mgd.request_smps_work, + ieee80211_request_smps_mgd_work); + if (local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS) + link->u.mgd.req_smps = IEEE80211_SMPS_AUTOMATIC; + else + link->u.mgd.req_smps = IEEE80211_SMPS_OFF; + + INIT_WORK(&link->u.mgd.chswitch_work, ieee80211_chswitch_work); + timer_setup(&link->u.mgd.chswitch_timer, ieee80211_chswitch_timer, 0); + + if (sdata->u.mgd.assoc_data) + ether_addr_copy(link->conf->addr, + sdata->u.mgd.assoc_data->link[link_id].addr); + else if (!is_valid_ether_addr(link->conf->addr)) + eth_random_addr(link->conf->addr); +} + +/* scan finished notification */ +void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local) +{ + struct ieee80211_sub_if_data *sdata; + + /* Restart STA timers */ + rcu_read_lock(); + list_for_each_entry_rcu(sdata, &local->interfaces, list) { + if (ieee80211_sdata_running(sdata)) + ieee80211_restart_sta_timer(sdata); + } + rcu_read_unlock(); +} + +static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, + struct cfg80211_bss *cbss, s8 link_id, + const u8 *ap_mld_addr, bool assoc, + bool override) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_bss *bss = (void *)cbss->priv; + struct sta_info *new_sta = NULL; + struct ieee80211_link_data *link; + bool have_sta = false; + bool mlo; + int err; + + if (link_id >= 0) { + mlo = true; + if (WARN_ON(!ap_mld_addr)) + return -EINVAL; + err = ieee80211_vif_set_links(sdata, BIT(link_id)); + } else { + if (WARN_ON(ap_mld_addr)) + return -EINVAL; + ap_mld_addr = cbss->bssid; + err = ieee80211_vif_set_links(sdata, 0); + link_id = 0; + mlo = false; + } + + if (err) + return err; + + link = sdata_dereference(sdata->link[link_id], sdata); + if (WARN_ON(!link)) { + err = -ENOLINK; + goto out_err; + } + + if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data)) { + err = -EINVAL; + goto out_err; + } + + /* If a reconfig is happening, bail out */ + if (local->in_reconfig) { + err = -EBUSY; + goto out_err; + } + + if (assoc) { + rcu_read_lock(); + have_sta = sta_info_get(sdata, ap_mld_addr); + rcu_read_unlock(); + } + + if (!have_sta) { + if (mlo) + new_sta = sta_info_alloc_with_link(sdata, ap_mld_addr, + link_id, cbss->bssid, + GFP_KERNEL); + else + new_sta = sta_info_alloc(sdata, ap_mld_addr, GFP_KERNEL); + + if (!new_sta) { + err = -ENOMEM; + goto out_err; + } + + new_sta->sta.mlo = mlo; + } + + /* + * Set up the information for the new channel before setting the + * new channel. We can't - completely race-free - change the basic + * rates bitmap and the channel (sband) that it refers to, but if + * we set it up before we at least avoid calling into the driver's + * bss_info_changed() method with invalid information (since we do + * call that from changing the channel - only for IDLE and perhaps + * some others, but ...). + * + * So to avoid that, just set up all the new information before the + * channel, but tell the driver to apply it only afterwards, since + * it might need the new channel for that. + */ + if (new_sta) { + const struct cfg80211_bss_ies *ies; + struct link_sta_info *link_sta; + + rcu_read_lock(); + link_sta = rcu_dereference(new_sta->link[link_id]); + if (WARN_ON(!link_sta)) { + rcu_read_unlock(); + sta_info_free(local, new_sta); + err = -EINVAL; + goto out_err; + } + + err = ieee80211_mgd_setup_link_sta(link, new_sta, + link_sta, cbss); + if (err) { + rcu_read_unlock(); + sta_info_free(local, new_sta); + goto out_err; + } + + memcpy(link->u.mgd.bssid, cbss->bssid, ETH_ALEN); + + /* set timing information */ + link->conf->beacon_int = cbss->beacon_interval; + ies = rcu_dereference(cbss->beacon_ies); + if (ies) { + link->conf->sync_tsf = ies->tsf; + link->conf->sync_device_ts = + bss->device_ts_beacon; + + ieee80211_get_dtim(ies, + &link->conf->sync_dtim_count, + NULL); + } else if (!ieee80211_hw_check(&sdata->local->hw, + TIMING_BEACON_ONLY)) { + ies = rcu_dereference(cbss->proberesp_ies); + /* must be non-NULL since beacon IEs were NULL */ + link->conf->sync_tsf = ies->tsf; + link->conf->sync_device_ts = + bss->device_ts_presp; + link->conf->sync_dtim_count = 0; + } else { + link->conf->sync_tsf = 0; + link->conf->sync_device_ts = 0; + link->conf->sync_dtim_count = 0; + } + rcu_read_unlock(); + } + + if (new_sta || override) { + err = ieee80211_prep_channel(sdata, link, cbss, + &link->u.mgd.conn_flags); + if (err) { + if (new_sta) + sta_info_free(local, new_sta); + goto out_err; + } + } + + if (new_sta) { + /* + * tell driver about BSSID, basic rates and timing + * this was set up above, before setting the channel + */ + ieee80211_link_info_change_notify(sdata, link, + BSS_CHANGED_BSSID | + BSS_CHANGED_BASIC_RATES | + BSS_CHANGED_BEACON_INT); + + if (assoc) + sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH); + + err = sta_info_insert(new_sta); + new_sta = NULL; + if (err) { + sdata_info(sdata, + "failed to insert STA entry for the AP (error %d)\n", + err); + goto out_err; + } + } else + WARN_ON_ONCE(!ether_addr_equal(link->u.mgd.bssid, cbss->bssid)); + + /* Cancel scan to ensure that nothing interferes with connection */ + if (local->scanning) + ieee80211_scan_cancel(local); + + return 0; + +out_err: + ieee80211_link_release_channel(&sdata->deflink); + ieee80211_vif_set_links(sdata, 0); + return err; +} + +/* config hooks */ +int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, + struct cfg80211_auth_request *req) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_mgd_auth_data *auth_data; + u16 auth_alg; + int err; + bool cont_auth; + + /* prepare auth data structure */ + + switch (req->auth_type) { + case NL80211_AUTHTYPE_OPEN_SYSTEM: + auth_alg = WLAN_AUTH_OPEN; + break; + case NL80211_AUTHTYPE_SHARED_KEY: + if (fips_enabled) + return -EOPNOTSUPP; + auth_alg = WLAN_AUTH_SHARED_KEY; + break; + case NL80211_AUTHTYPE_FT: + auth_alg = WLAN_AUTH_FT; + break; + case NL80211_AUTHTYPE_NETWORK_EAP: + auth_alg = WLAN_AUTH_LEAP; + break; + case NL80211_AUTHTYPE_SAE: + auth_alg = WLAN_AUTH_SAE; + break; + case NL80211_AUTHTYPE_FILS_SK: + auth_alg = WLAN_AUTH_FILS_SK; + break; + case NL80211_AUTHTYPE_FILS_SK_PFS: + auth_alg = WLAN_AUTH_FILS_SK_PFS; + break; + case NL80211_AUTHTYPE_FILS_PK: + auth_alg = WLAN_AUTH_FILS_PK; + break; + default: + return -EOPNOTSUPP; + } + + if (ifmgd->assoc_data) + return -EBUSY; + + auth_data = kzalloc(sizeof(*auth_data) + req->auth_data_len + + req->ie_len, GFP_KERNEL); + if (!auth_data) + return -ENOMEM; + + memcpy(auth_data->ap_addr, + req->ap_mld_addr ?: req->bss->bssid, + ETH_ALEN); + auth_data->bss = req->bss; + auth_data->link_id = req->link_id; + + if (req->auth_data_len >= 4) { + if (req->auth_type == NL80211_AUTHTYPE_SAE) { + __le16 *pos = (__le16 *) req->auth_data; + + auth_data->sae_trans = le16_to_cpu(pos[0]); + auth_data->sae_status = le16_to_cpu(pos[1]); + } + memcpy(auth_data->data, req->auth_data + 4, + req->auth_data_len - 4); + auth_data->data_len += req->auth_data_len - 4; + } + + /* Check if continuing authentication or trying to authenticate with the + * same BSS that we were in the process of authenticating with and avoid + * removal and re-addition of the STA entry in + * ieee80211_prep_connection(). + */ + cont_auth = ifmgd->auth_data && req->bss == ifmgd->auth_data->bss && + ifmgd->auth_data->link_id == req->link_id; + + if (req->ie && req->ie_len) { + memcpy(&auth_data->data[auth_data->data_len], + req->ie, req->ie_len); + auth_data->data_len += req->ie_len; + } + + if (req->key && req->key_len) { + auth_data->key_len = req->key_len; + auth_data->key_idx = req->key_idx; + memcpy(auth_data->key, req->key, req->key_len); + } + + auth_data->algorithm = auth_alg; + + /* try to authenticate/probe */ + + if (ifmgd->auth_data) { + if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE) { + auth_data->peer_confirmed = + ifmgd->auth_data->peer_confirmed; + } + ieee80211_destroy_auth_data(sdata, cont_auth); + } + + /* prep auth_data so we don't go into idle on disassoc */ + ifmgd->auth_data = auth_data; + + /* If this is continuation of an ongoing SAE authentication exchange + * (i.e., request to send SAE Confirm) and the peer has already + * confirmed, mark authentication completed since we are about to send + * out SAE Confirm. + */ + if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE && + auth_data->peer_confirmed && auth_data->sae_trans == 2) + ieee80211_mark_sta_auth(sdata); + + if (ifmgd->associated) { + u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; + + sdata_info(sdata, + "disconnect from AP %pM for new auth to %pM\n", + sdata->vif.cfg.ap_addr, auth_data->ap_addr); + ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, + WLAN_REASON_UNSPECIFIED, + false, frame_buf); + + ieee80211_report_disconnect(sdata, frame_buf, + sizeof(frame_buf), true, + WLAN_REASON_UNSPECIFIED, + false); + } + + sdata_info(sdata, "authenticate with %pM\n", auth_data->ap_addr); + + /* needed for transmitting the auth frame(s) properly */ + memcpy(sdata->vif.cfg.ap_addr, auth_data->ap_addr, ETH_ALEN); + + err = ieee80211_prep_connection(sdata, req->bss, req->link_id, + req->ap_mld_addr, cont_auth, false); + if (err) + goto err_clear; + + err = ieee80211_auth(sdata); + if (err) { + sta_info_destroy_addr(sdata, auth_data->ap_addr); + goto err_clear; + } + + /* hold our own reference */ + cfg80211_ref_bss(local->hw.wiphy, auth_data->bss); + return 0; + + err_clear: + if (!sdata->vif.valid_links) { + eth_zero_addr(sdata->deflink.u.mgd.bssid); + ieee80211_link_info_change_notify(sdata, &sdata->deflink, + BSS_CHANGED_BSSID); + mutex_lock(&sdata->local->mtx); + ieee80211_link_release_channel(&sdata->deflink); + mutex_unlock(&sdata->local->mtx); + } + ifmgd->auth_data = NULL; + kfree(auth_data); + return err; +} + +static ieee80211_conn_flags_t +ieee80211_setup_assoc_link(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgd_assoc_data *assoc_data, + struct cfg80211_assoc_request *req, + ieee80211_conn_flags_t conn_flags, + unsigned int link_id) +{ + struct ieee80211_local *local = sdata->local; + const struct cfg80211_bss_ies *beacon_ies; + struct ieee80211_supported_band *sband; + const struct element *ht_elem, *vht_elem; + struct ieee80211_link_data *link; + struct cfg80211_bss *cbss; + struct ieee80211_bss *bss; + bool is_5ghz, is_6ghz; + + cbss = assoc_data->link[link_id].bss; + if (WARN_ON(!cbss)) + return 0; + + bss = (void *)cbss->priv; + + sband = local->hw.wiphy->bands[cbss->channel->band]; + if (WARN_ON(!sband)) + return 0; + + link = sdata_dereference(sdata->link[link_id], sdata); + if (WARN_ON(!link)) + return 0; + + is_5ghz = cbss->channel->band == NL80211_BAND_5GHZ; + is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ; + + /* for MLO connections assume advertising all rates is OK */ + if (!req->ap_mld_addr) { + assoc_data->supp_rates = bss->supp_rates; + assoc_data->supp_rates_len = bss->supp_rates_len; + } + + /* copy and link elems for the STA profile */ + if (req->links[link_id].elems_len) { + memcpy(assoc_data->ie_pos, req->links[link_id].elems, + req->links[link_id].elems_len); + assoc_data->link[link_id].elems = assoc_data->ie_pos; + assoc_data->link[link_id].elems_len = req->links[link_id].elems_len; + assoc_data->ie_pos += req->links[link_id].elems_len; + } + + rcu_read_lock(); + ht_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_HT_OPERATION); + if (ht_elem && ht_elem->datalen >= sizeof(struct ieee80211_ht_operation)) + assoc_data->link[link_id].ap_ht_param = + ((struct ieee80211_ht_operation *)(ht_elem->data))->ht_param; + else if (!is_6ghz) + conn_flags |= IEEE80211_CONN_DISABLE_HT; + vht_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_VHT_CAPABILITY); + if (vht_elem && vht_elem->datalen >= sizeof(struct ieee80211_vht_cap)) { + memcpy(&assoc_data->link[link_id].ap_vht_cap, vht_elem->data, + sizeof(struct ieee80211_vht_cap)); + } else if (is_5ghz) { + link_info(link, + "VHT capa missing/short, disabling VHT/HE/EHT\n"); + conn_flags |= IEEE80211_CONN_DISABLE_VHT | + IEEE80211_CONN_DISABLE_HE | + IEEE80211_CONN_DISABLE_EHT; + } + rcu_read_unlock(); + + link->u.mgd.beacon_crc_valid = false; + link->u.mgd.dtim_period = 0; + link->u.mgd.have_beacon = false; + + /* override HT/VHT configuration only if the AP and we support it */ + if (!(conn_flags & IEEE80211_CONN_DISABLE_HT)) { + struct ieee80211_sta_ht_cap sta_ht_cap; + + memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap)); + ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); + } + + rcu_read_lock(); + beacon_ies = rcu_dereference(cbss->beacon_ies); + if (beacon_ies) { + const struct element *elem; + u8 dtim_count = 0; + + ieee80211_get_dtim(beacon_ies, &dtim_count, + &link->u.mgd.dtim_period); + + sdata->deflink.u.mgd.have_beacon = true; + + if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) { + link->conf->sync_tsf = beacon_ies->tsf; + link->conf->sync_device_ts = bss->device_ts_beacon; + link->conf->sync_dtim_count = dtim_count; + } + + elem = cfg80211_find_ext_elem(WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION, + beacon_ies->data, beacon_ies->len); + if (elem && elem->datalen >= 3) + link->conf->profile_periodicity = elem->data[2]; + else + link->conf->profile_periodicity = 0; + + elem = cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY, + beacon_ies->data, beacon_ies->len); + if (elem && elem->datalen >= 11 && + (elem->data[10] & WLAN_EXT_CAPA11_EMA_SUPPORT)) + link->conf->ema_ap = true; + else + link->conf->ema_ap = false; + } + rcu_read_unlock(); + + if (bss->corrupt_data) { + char *corrupt_type = "data"; + + if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) { + if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP) + corrupt_type = "beacon and probe response"; + else + corrupt_type = "beacon"; + } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP) { + corrupt_type = "probe response"; + } + sdata_info(sdata, "associating to AP %pM with corrupt %s\n", + cbss->bssid, corrupt_type); + } + + if (link->u.mgd.req_smps == IEEE80211_SMPS_AUTOMATIC) { + if (sdata->u.mgd.powersave) + link->smps_mode = IEEE80211_SMPS_DYNAMIC; + else + link->smps_mode = IEEE80211_SMPS_OFF; + } else { + link->smps_mode = link->u.mgd.req_smps; + } + + return conn_flags; +} + +int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, + struct cfg80211_assoc_request *req) +{ + unsigned int assoc_link_id = req->link_id < 0 ? 0 : req->link_id; + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_mgd_assoc_data *assoc_data; + const struct element *ssid_elem; + struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg; + ieee80211_conn_flags_t conn_flags = 0; + struct ieee80211_link_data *link; + struct cfg80211_bss *cbss; + struct ieee80211_bss *bss; + bool override; + int i, err; + size_t size = sizeof(*assoc_data) + req->ie_len; + + for (i = 0; i < IEEE80211_MLD_MAX_NUM_LINKS; i++) + size += req->links[i].elems_len; + + /* FIXME: no support for 4-addr MLO yet */ + if (sdata->u.mgd.use_4addr && req->link_id >= 0) + return -EOPNOTSUPP; + + assoc_data = kzalloc(size, GFP_KERNEL); + if (!assoc_data) + return -ENOMEM; + + cbss = req->link_id < 0 ? req->bss : req->links[req->link_id].bss; + + rcu_read_lock(); + ssid_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_SSID); + if (!ssid_elem || ssid_elem->datalen > sizeof(assoc_data->ssid)) { + rcu_read_unlock(); + kfree(assoc_data); + return -EINVAL; + } + memcpy(assoc_data->ssid, ssid_elem->data, ssid_elem->datalen); + assoc_data->ssid_len = ssid_elem->datalen; + memcpy(vif_cfg->ssid, assoc_data->ssid, assoc_data->ssid_len); + vif_cfg->ssid_len = assoc_data->ssid_len; + rcu_read_unlock(); + + if (req->ap_mld_addr) { + for (i = 0; i < IEEE80211_MLD_MAX_NUM_LINKS; i++) { + if (!req->links[i].bss) + continue; + link = sdata_dereference(sdata->link[i], sdata); + if (link) + ether_addr_copy(assoc_data->link[i].addr, + link->conf->addr); + else + eth_random_addr(assoc_data->link[i].addr); + } + } else { + memcpy(assoc_data->link[0].addr, sdata->vif.addr, ETH_ALEN); + } + + assoc_data->s1g = cbss->channel->band == NL80211_BAND_S1GHZ; + + memcpy(assoc_data->ap_addr, + req->ap_mld_addr ?: req->bss->bssid, + ETH_ALEN); + + if (ifmgd->associated) { + u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; + + sdata_info(sdata, + "disconnect from AP %pM for new assoc to %pM\n", + sdata->vif.cfg.ap_addr, assoc_data->ap_addr); + ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, + WLAN_REASON_UNSPECIFIED, + false, frame_buf); + + ieee80211_report_disconnect(sdata, frame_buf, + sizeof(frame_buf), true, + WLAN_REASON_UNSPECIFIED, + false); + } + + if (ifmgd->auth_data && !ifmgd->auth_data->done) { + err = -EBUSY; + goto err_free; + } + + if (ifmgd->assoc_data) { + err = -EBUSY; + goto err_free; + } + + if (ifmgd->auth_data) { + bool match; + + /* keep sta info, bssid if matching */ + match = ether_addr_equal(ifmgd->auth_data->ap_addr, + assoc_data->ap_addr) && + ifmgd->auth_data->link_id == req->link_id; + ieee80211_destroy_auth_data(sdata, match); + } + + /* prepare assoc data */ + + bss = (void *)cbss->priv; + assoc_data->wmm = bss->wmm_used && + (local->hw.queues >= IEEE80211_NUM_ACS); + + /* + * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode. + * We still associate in non-HT mode (11a/b/g) if any one of these + * ciphers is configured as pairwise. + * We can set this to true for non-11n hardware, that'll be checked + * separately along with the peer capabilities. + */ + for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) { + if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 || + req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP || + req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) { + conn_flags |= IEEE80211_CONN_DISABLE_HT; + conn_flags |= IEEE80211_CONN_DISABLE_VHT; + conn_flags |= IEEE80211_CONN_DISABLE_HE; + conn_flags |= IEEE80211_CONN_DISABLE_EHT; + netdev_info(sdata->dev, + "disabling HT/VHT/HE due to WEP/TKIP use\n"); + } + } + + /* also disable HT/VHT/HE/EHT if the AP doesn't use WMM */ + if (!bss->wmm_used) { + conn_flags |= IEEE80211_CONN_DISABLE_HT; + conn_flags |= IEEE80211_CONN_DISABLE_VHT; + conn_flags |= IEEE80211_CONN_DISABLE_HE; + conn_flags |= IEEE80211_CONN_DISABLE_EHT; + netdev_info(sdata->dev, + "disabling HT/VHT/HE as WMM/QoS is not supported by the AP\n"); + } + + if (req->flags & ASSOC_REQ_DISABLE_HT) { + mlme_dbg(sdata, "HT disabled by flag, disabling HT/VHT/HE\n"); + conn_flags |= IEEE80211_CONN_DISABLE_HT; + conn_flags |= IEEE80211_CONN_DISABLE_VHT; + conn_flags |= IEEE80211_CONN_DISABLE_HE; + conn_flags |= IEEE80211_CONN_DISABLE_EHT; + } + + if (req->flags & ASSOC_REQ_DISABLE_VHT) { + mlme_dbg(sdata, "VHT disabled by flag, disabling VHT\n"); + conn_flags |= IEEE80211_CONN_DISABLE_VHT; + } + + if (req->flags & ASSOC_REQ_DISABLE_HE) { + mlme_dbg(sdata, "HE disabled by flag, disabling HE/EHT\n"); + conn_flags |= IEEE80211_CONN_DISABLE_HE; + conn_flags |= IEEE80211_CONN_DISABLE_EHT; + } + + if (req->flags & ASSOC_REQ_DISABLE_EHT) + conn_flags |= IEEE80211_CONN_DISABLE_EHT; + + memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa)); + memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask, + sizeof(ifmgd->ht_capa_mask)); + + memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa)); + memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask, + sizeof(ifmgd->vht_capa_mask)); + + memcpy(&ifmgd->s1g_capa, &req->s1g_capa, sizeof(ifmgd->s1g_capa)); + memcpy(&ifmgd->s1g_capa_mask, &req->s1g_capa_mask, + sizeof(ifmgd->s1g_capa_mask)); + + if (req->ie && req->ie_len) { + memcpy(assoc_data->ie, req->ie, req->ie_len); + assoc_data->ie_len = req->ie_len; + assoc_data->ie_pos = assoc_data->ie + assoc_data->ie_len; + } else { + assoc_data->ie_pos = assoc_data->ie; + } + + if (req->fils_kek) { + /* should already be checked in cfg80211 - so warn */ + if (WARN_ON(req->fils_kek_len > FILS_MAX_KEK_LEN)) { + err = -EINVAL; + goto err_free; + } + memcpy(assoc_data->fils_kek, req->fils_kek, + req->fils_kek_len); + assoc_data->fils_kek_len = req->fils_kek_len; + } + + if (req->fils_nonces) + memcpy(assoc_data->fils_nonces, req->fils_nonces, + 2 * FILS_NONCE_LEN); + + /* default timeout */ + assoc_data->timeout = jiffies; + assoc_data->timeout_started = true; + + assoc_data->assoc_link_id = assoc_link_id; + + if (req->ap_mld_addr) { + for (i = 0; i < ARRAY_SIZE(assoc_data->link); i++) { + assoc_data->link[i].conn_flags = conn_flags; + assoc_data->link[i].bss = req->links[i].bss; + } + + /* if there was no authentication, set up the link */ + err = ieee80211_vif_set_links(sdata, BIT(assoc_link_id)); + if (err) + goto err_clear; + } else { + assoc_data->link[0].conn_flags = conn_flags; + assoc_data->link[0].bss = cbss; + } + + link = sdata_dereference(sdata->link[assoc_link_id], sdata); + if (WARN_ON(!link)) { + err = -EINVAL; + goto err_clear; + } + + /* keep old conn_flags from ieee80211_prep_channel() from auth */ + conn_flags |= link->u.mgd.conn_flags; + conn_flags |= ieee80211_setup_assoc_link(sdata, assoc_data, req, + conn_flags, assoc_link_id); + override = link->u.mgd.conn_flags != conn_flags; + link->u.mgd.conn_flags |= conn_flags; + + if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) && + ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK), + "U-APSD not supported with HW_PS_NULLFUNC_STACK\n")) + sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD; + + if (bss->wmm_used && bss->uapsd_supported && + (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) { + assoc_data->uapsd = true; + ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED; + } else { + assoc_data->uapsd = false; + ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED; + } + + if (req->prev_bssid) + memcpy(assoc_data->prev_ap_addr, req->prev_bssid, ETH_ALEN); + + if (req->use_mfp) { + ifmgd->mfp = IEEE80211_MFP_REQUIRED; + ifmgd->flags |= IEEE80211_STA_MFP_ENABLED; + } else { + ifmgd->mfp = IEEE80211_MFP_DISABLED; + ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED; + } + + if (req->flags & ASSOC_REQ_USE_RRM) + ifmgd->flags |= IEEE80211_STA_ENABLE_RRM; + else + ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM; + + if (req->crypto.control_port) + ifmgd->flags |= IEEE80211_STA_CONTROL_PORT; + else + ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT; + + sdata->control_port_protocol = req->crypto.control_port_ethertype; + sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt; + sdata->control_port_over_nl80211 = + req->crypto.control_port_over_nl80211; + sdata->control_port_no_preauth = req->crypto.control_port_no_preauth; + + /* kick off associate process */ + ifmgd->assoc_data = assoc_data; + + for (i = 0; i < ARRAY_SIZE(assoc_data->link); i++) { + if (!assoc_data->link[i].bss) + continue; + if (i == assoc_data->assoc_link_id) + continue; + /* only calculate the flags, hence link == NULL */ + err = ieee80211_prep_channel(sdata, NULL, assoc_data->link[i].bss, + &assoc_data->link[i].conn_flags); + if (err) + goto err_clear; + } + + /* needed for transmitting the assoc frames properly */ + memcpy(sdata->vif.cfg.ap_addr, assoc_data->ap_addr, ETH_ALEN); + + err = ieee80211_prep_connection(sdata, cbss, req->link_id, + req->ap_mld_addr, true, override); + if (err) + goto err_clear; + + assoc_data->link[assoc_data->assoc_link_id].conn_flags = + link->u.mgd.conn_flags; + + if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC)) { + const struct cfg80211_bss_ies *beacon_ies; + + rcu_read_lock(); + beacon_ies = rcu_dereference(req->bss->beacon_ies); + + if (beacon_ies) { + /* + * Wait up to one beacon interval ... + * should this be more if we miss one? + */ + sdata_info(sdata, "waiting for beacon from %pM\n", + link->u.mgd.bssid); + assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval); + assoc_data->timeout_started = true; + assoc_data->need_beacon = true; + } + rcu_read_unlock(); + } + + run_again(sdata, assoc_data->timeout); + + return 0; + err_clear: + eth_zero_addr(sdata->deflink.u.mgd.bssid); + ieee80211_link_info_change_notify(sdata, &sdata->deflink, + BSS_CHANGED_BSSID); + ifmgd->assoc_data = NULL; + err_free: + kfree(assoc_data); + return err; +} + +int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, + struct cfg80211_deauth_request *req) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; + bool tx = !req->local_state_change; + struct ieee80211_prep_tx_info info = { + .subtype = IEEE80211_STYPE_DEAUTH, + }; + + if (ifmgd->auth_data && + ether_addr_equal(ifmgd->auth_data->ap_addr, req->bssid)) { + sdata_info(sdata, + "aborting authentication with %pM by local choice (Reason: %u=%s)\n", + req->bssid, req->reason_code, + ieee80211_get_reason_code_string(req->reason_code)); + + drv_mgd_prepare_tx(sdata->local, sdata, &info); + ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid, + IEEE80211_STYPE_DEAUTH, + req->reason_code, tx, + frame_buf); + ieee80211_destroy_auth_data(sdata, false); + ieee80211_report_disconnect(sdata, frame_buf, + sizeof(frame_buf), true, + req->reason_code, false); + drv_mgd_complete_tx(sdata->local, sdata, &info); + return 0; + } + + if (ifmgd->assoc_data && + ether_addr_equal(ifmgd->assoc_data->ap_addr, req->bssid)) { + sdata_info(sdata, + "aborting association with %pM by local choice (Reason: %u=%s)\n", + req->bssid, req->reason_code, + ieee80211_get_reason_code_string(req->reason_code)); + + drv_mgd_prepare_tx(sdata->local, sdata, &info); + ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid, + IEEE80211_STYPE_DEAUTH, + req->reason_code, tx, + frame_buf); + ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON); + ieee80211_report_disconnect(sdata, frame_buf, + sizeof(frame_buf), true, + req->reason_code, false); + return 0; + } + + if (ifmgd->associated && + ether_addr_equal(sdata->vif.cfg.ap_addr, req->bssid)) { + sdata_info(sdata, + "deauthenticating from %pM by local choice (Reason: %u=%s)\n", + req->bssid, req->reason_code, + ieee80211_get_reason_code_string(req->reason_code)); + + ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, + req->reason_code, tx, frame_buf); + ieee80211_report_disconnect(sdata, frame_buf, + sizeof(frame_buf), true, + req->reason_code, false); + drv_mgd_complete_tx(sdata->local, sdata, &info); + return 0; + } + + return -ENOTCONN; +} + +int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, + struct cfg80211_disassoc_request *req) +{ + u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; + + if (!sdata->u.mgd.associated || + memcmp(sdata->vif.cfg.ap_addr, req->ap_addr, ETH_ALEN)) + return -ENOTCONN; + + sdata_info(sdata, + "disassociating from %pM by local choice (Reason: %u=%s)\n", + req->ap_addr, req->reason_code, + ieee80211_get_reason_code_string(req->reason_code)); + + ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC, + req->reason_code, !req->local_state_change, + frame_buf); + + ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, + req->reason_code, false); + + return 0; +} + +void ieee80211_mgd_stop_link(struct ieee80211_link_data *link) +{ + cancel_work_sync(&link->u.mgd.request_smps_work); + cancel_work_sync(&link->u.mgd.chswitch_work); +} + +void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + + /* + * Make sure some work items will not run after this, + * they will not do anything but might not have been + * cancelled when disconnecting. + */ + cancel_work_sync(&ifmgd->monitor_work); + cancel_work_sync(&ifmgd->beacon_connection_loss_work); + cancel_work_sync(&ifmgd->csa_connection_drop_work); + cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work); + + sdata_lock(sdata); + if (ifmgd->assoc_data) + ieee80211_destroy_assoc_data(sdata, ASSOC_TIMEOUT); + if (ifmgd->auth_data) + ieee80211_destroy_auth_data(sdata, false); + spin_lock_bh(&ifmgd->teardown_lock); + if (ifmgd->teardown_skb) { + kfree_skb(ifmgd->teardown_skb); + ifmgd->teardown_skb = NULL; + ifmgd->orig_teardown_skb = NULL; + } + kfree(ifmgd->assoc_req_ies); + ifmgd->assoc_req_ies = NULL; + ifmgd->assoc_req_ies_len = 0; + spin_unlock_bh(&ifmgd->teardown_lock); + del_timer_sync(&ifmgd->timer); + sdata_unlock(sdata); +} + +void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif, + enum nl80211_cqm_rssi_threshold_event rssi_event, + s32 rssi_level, + gfp_t gfp) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + + trace_api_cqm_rssi_notify(sdata, rssi_event, rssi_level); + + cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, rssi_level, gfp); +} +EXPORT_SYMBOL(ieee80211_cqm_rssi_notify); + +void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + + trace_api_cqm_beacon_loss_notify(sdata->local, sdata); + + cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp); +} +EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify); + +static void _ieee80211_enable_rssi_reports(struct ieee80211_sub_if_data *sdata, + int rssi_min_thold, + int rssi_max_thold) +{ + trace_api_enable_rssi_reports(sdata, rssi_min_thold, rssi_max_thold); + + if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) + return; + + /* + * Scale up threshold values before storing it, as the RSSI averaging + * algorithm uses a scaled up value as well. Change this scaling + * factor if the RSSI averaging algorithm changes. + */ + sdata->u.mgd.rssi_min_thold = rssi_min_thold*16; + sdata->u.mgd.rssi_max_thold = rssi_max_thold*16; +} + +void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif, + int rssi_min_thold, + int rssi_max_thold) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + + WARN_ON(rssi_min_thold == rssi_max_thold || + rssi_min_thold > rssi_max_thold); + + _ieee80211_enable_rssi_reports(sdata, rssi_min_thold, + rssi_max_thold); +} +EXPORT_SYMBOL(ieee80211_enable_rssi_reports); + +void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + + _ieee80211_enable_rssi_reports(sdata, 0, 0); +} +EXPORT_SYMBOL(ieee80211_disable_rssi_reports); |