diff options
Diffstat (limited to 'samples/pktgen')
| -rw-r--r-- | samples/pktgen/README.rst | 64 | ||||
| -rw-r--r-- | samples/pktgen/functions.sh | 339 | ||||
| -rw-r--r-- | samples/pktgen/parameters.sh | 139 | ||||
| -rwxr-xr-x | samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh | 109 | ||||
| -rwxr-xr-x | samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh | 89 | ||||
| -rwxr-xr-x | samples/pktgen/pktgen_sample01_simple.sh | 100 | ||||
| -rwxr-xr-x | samples/pktgen/pktgen_sample02_multiqueue.sh | 107 | ||||
| -rwxr-xr-x | samples/pktgen/pktgen_sample03_burst_single_flow.sh | 106 | ||||
| -rwxr-xr-x | samples/pktgen/pktgen_sample04_many_flows.sh | 118 | ||||
| -rwxr-xr-x | samples/pktgen/pktgen_sample05_flow_per_thread.sh | 102 | ||||
| -rwxr-xr-x | samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh | 125 |
11 files changed, 1398 insertions, 0 deletions
diff --git a/samples/pktgen/README.rst b/samples/pktgen/README.rst new file mode 100644 index 000000000..f4adeed5f --- /dev/null +++ b/samples/pktgen/README.rst @@ -0,0 +1,64 @@ +Sample and benchmark scripts for pktgen (packet generator) +========================================================== +This directory contains some pktgen sample and benchmark scripts, that +can easily be copied and adjusted for your own use-case. + +General doc is located in kernel: Documentation/networking/pktgen.rst + +Helper include files +==================== +This directory contains two helper shell files, that can be "included" +by shell source'ing. Namely "functions.sh" and "parameters.sh". + +Common parameters +----------------- +The parameters.sh file support easy and consistant parameter parsing +across the sample scripts. Usage example is printed on errors:: + + Usage: ./pktgen_sample01_simple.sh [-vx] -i ethX + -i : ($DEV) output interface/device (required) + -s : ($PKT_SIZE) packet size + -d : ($DEST_IP) destination IP. CIDR (e.g. 198.18.0.0/15) is also allowed + -m : ($DST_MAC) destination MAC-addr + -p : ($DST_PORT) destination PORT range (e.g. 433-444) is also allowed + -t : ($THREADS) threads to start + -f : ($F_THREAD) index of first thread (zero indexed CPU number) + -c : ($SKB_CLONE) SKB clones send before alloc new SKB + -n : ($COUNT) num messages to send per thread, 0 means indefinitely + -b : ($BURST) HW level bursting of SKBs + -v : ($VERBOSE) verbose + -x : ($DEBUG) debug + -6 : ($IP6) IPv6 + -w : ($DELAY) Tx Delay value (ns) + -a : ($APPEND) Script will not reset generator's state, but will append its config + +The global variable being set is also listed. E.g. the required +interface/device parameter "-i" sets variable $DEV. + +"-a" parameter may be used to create different flows simultaneously. +In this mode script will keep the existing config, will append its settings. +In this mode you'll have to manually run traffic with "pg_ctrl start". + +For example you may use: + + source ./samples/pktgen/functions.sh + pg_ctrl reset + # add first device + ./pktgen_sample06_numa_awared_queue_irq_affinity.sh -a -i ens1f0 -m 34:80:0d:a3:fc:c9 -t 8 + # add second device + ./pktgen_sample06_numa_awared_queue_irq_affinity.sh -a -i ens1f1 -m 34:80:0d:a3:fc:c9 -t 8 + # run joint traffic on two devs + pg_ctrl start + +Common functions +---------------- +The functions.sh file provides; Three different shell functions for +configuring the different components of pktgen: pg_ctrl(), pg_thread() +and pg_set(). + +These functions correspond to pktgens different components. + * pg_ctrl() control "pgctrl" (/proc/net/pktgen/pgctrl) + * pg_thread() control the kernel threads and binding to devices + * pg_set() control setup of individual devices + +See sample scripts for usage examples. diff --git a/samples/pktgen/functions.sh b/samples/pktgen/functions.sh new file mode 100644 index 000000000..933194257 --- /dev/null +++ b/samples/pktgen/functions.sh @@ -0,0 +1,339 @@ +# +# Common functions used by pktgen scripts +# - Depending on bash 3 (or higher) syntax +# +# Author: Jesper Dangaaard Brouer +# License: GPL + +set -o errexit + +## -- General shell logging cmds -- +function err() { + local exitcode=$1 + shift + echo "ERROR: $@" >&2 + exit $exitcode +} + +function warn() { + echo "WARN : $@" >&2 +} + +function info() { + if [[ -n "$VERBOSE" ]]; then + echo "INFO : $@" >&2 + fi +} + +## -- Pktgen proc config commands -- ## +export PROC_DIR=/proc/net/pktgen +# +# Three different shell functions for configuring the different +# components of pktgen: +# pg_ctrl(), pg_thread() and pg_set(). +# +# These functions correspond to pktgens different components. +# * pg_ctrl() control "pgctrl" (/proc/net/pktgen/pgctrl) +# * pg_thread() control the kernel threads and binding to devices +# * pg_set() control setup of individual devices +function pg_ctrl() { + local proc_file="pgctrl" + proc_cmd ${proc_file} "$@" +} + +function pg_thread() { + local thread=$1 + local proc_file="kpktgend_${thread}" + shift + proc_cmd ${proc_file} "$@" +} + +function pg_set() { + local dev=$1 + local proc_file="$dev" + shift + proc_cmd ${proc_file} "$@" +} + +# More generic replacement for pgset(), that does not depend on global +# variable for proc file. +function proc_cmd() { + local result + local proc_file=$1 + local status=0 + # after shift, the remaining args are contained in $@ + shift + local proc_ctrl=${PROC_DIR}/$proc_file + if [[ ! -e "$proc_ctrl" ]]; then + err 3 "proc file:$proc_ctrl does not exists (dev added to thread?)" + else + if [[ ! -w "$proc_ctrl" ]]; then + err 4 "proc file:$proc_ctrl not writable, not root?!" + fi + fi + + if [[ "$DEBUG" == "yes" ]]; then + echo "cmd: $@ > $proc_ctrl" + fi + # Quoting of "$@" is important for space expansion + echo "$@" > "$proc_ctrl" || status=$? + + if [[ "$proc_file" != "pgctrl" ]]; then + result=$(grep "Result: OK:" $proc_ctrl) || true + if [[ "$result" == "" ]]; then + grep "Result:" $proc_ctrl >&2 + fi + fi + if (( $status != 0 )); then + err 5 "Write error($status) occurred cmd: \"$@ > $proc_ctrl\"" + fi +} + +# Old obsolete "pgset" function, with slightly improved err handling +function pgset() { + local result + + if [[ "$DEBUG" == "yes" ]]; then + echo "cmd: $1 > $PGDEV" + fi + echo $1 > $PGDEV + local status=$? + + result=`cat $PGDEV | fgrep "Result: OK:"` + if [[ "$result" == "" ]]; then + cat $PGDEV | fgrep Result: + fi + if (( $status != 0 )); then + err 5 "Write error($status) occurred cmd: \"$1 > $PGDEV\"" + fi +} + +if [[ -z "$APPEND" ]]; then + if [[ $EUID -eq 0 ]]; then + # Cleanup pktgen setup on exit if thats not "append mode" + trap 'pg_ctrl "reset"' EXIT + fi +fi + +## -- General shell tricks -- + +function root_check_run_with_sudo() { + # Trick so, program can be run as normal user, will just use "sudo" + # call as root_check_run_as_sudo "$@" + if [ "$EUID" -ne 0 ]; then + if [ -x $0 ]; then # Directly executable use sudo + info "Not root, running with sudo" + sudo -E "$0" "$@" + exit $? + fi + err 4 "cannot perform sudo run of $0" + fi +} + +# Exact input device's NUMA node info +function get_iface_node() +{ + local node=$(</sys/class/net/$1/device/numa_node) + if [[ $node == -1 ]]; then + echo 0 + else + echo $node + fi +} + +# Given an Dev/iface, get its queues' irq numbers +function get_iface_irqs() +{ + local IFACE=$1 + local queues="${IFACE}-.*TxRx" + + irqs=$(grep "$queues" /proc/interrupts | cut -f1 -d:) + [ -z "$irqs" ] && irqs=$(grep $IFACE /proc/interrupts | cut -f1 -d:) + [ -z "$irqs" ] && irqs=$(for i in `ls -Ux /sys/class/net/$IFACE/device/msi_irqs` ;\ + do grep "$i:.*TxRx" /proc/interrupts | grep -v fdir | cut -f 1 -d : ;\ + done) + [ -z "$irqs" ] && err 3 "Could not find interrupts for $IFACE" + + echo $irqs +} + +# Given a NUMA node, return cpu ids belonging to it. +function get_node_cpus() +{ + local node=$1 + local node_cpu_list + local node_cpu_range_list=`cut -f1- -d, --output-delimiter=" " \ + /sys/devices/system/node/node$node/cpulist` + + for cpu_range in $node_cpu_range_list + do + node_cpu_list="$node_cpu_list "`seq -s " " ${cpu_range//-/ }` + done + + echo $node_cpu_list +} + +# Check $1 is in between $2, $3 ($2 <= $1 <= $3) +function in_between() { [[ ($1 -ge $2) && ($1 -le $3) ]] ; } + +# Extend shrunken IPv6 address. +# fe80::42:bcff:fe84:e10a => fe80:0:0:0:42:bcff:fe84:e10a +function extend_addr6() +{ + local addr=$1 + local sep=: sep2=:: + local sep_cnt=$(tr -cd $sep <<< $1 | wc -c) + local shrink + + # separator count should be (2 <= $sep_cnt <= 7) + if ! (in_between $sep_cnt 2 7); then + err 5 "Invalid IP6 address: $1" + fi + + # if shrink '::' occurs multiple, it's malformed. + shrink=( $(egrep -o "$sep{2,}" <<< $addr) ) + if [[ ${#shrink[@]} -ne 0 ]]; then + if [[ ${#shrink[@]} -gt 1 || ( ${shrink[0]} != $sep2 ) ]]; then + err 5 "Invalid IP6 address: $1" + fi + fi + + # add 0 at begin & end, and extend addr by adding :0 + [[ ${addr:0:1} == $sep ]] && addr=0${addr} + [[ ${addr: -1} == $sep ]] && addr=${addr}0 + echo "${addr/$sep2/$(printf ':0%.s' $(seq $[8-sep_cnt])):}" +} + +# Given a single IP(v4/v6) address, whether it is valid. +function validate_addr() +{ + # check function is called with (funcname)6 + [[ ${FUNCNAME[1]: -1} == 6 ]] && local IP6=6 + local bitlen=$[ IP6 ? 128 : 32 ] + local len=$[ IP6 ? 8 : 4 ] + local max=$[ 2**(len*2)-1 ] + local net prefix + local addr sep + + IFS='/' read net prefix <<< $1 + [[ $IP6 ]] && net=$(extend_addr6 $net) + + # if prefix exists, check (0 <= $prefix <= $bitlen) + if [[ -n $prefix ]]; then + if ! (in_between $prefix 0 $bitlen); then + err 5 "Invalid prefix: /$prefix" + fi + fi + + # set separator for each IP(v4/v6) + [[ $IP6 ]] && sep=: || sep=. + IFS=$sep read -a addr <<< $net + + # array length + if [[ ${#addr[@]} != $len ]]; then + err 5 "Invalid IP$IP6 address: $1" + fi + + # check each digit (0 <= $digit <= $max) + for digit in "${addr[@]}"; do + [[ $IP6 ]] && digit=$[ 16#$digit ] + if ! (in_between $digit 0 $max); then + err 5 "Invalid IP$IP6 address: $1" + fi + done + + return 0 +} + +function validate_addr6() { validate_addr $@ ; } + +# Given a single IP(v4/v6) or CIDR, return minimum and maximum IP addr. +function parse_addr() +{ + # check function is called with (funcname)6 + [[ ${FUNCNAME[1]: -1} == 6 ]] && local IP6=6 + local net prefix + local min_ip max_ip + + IFS='/' read net prefix <<< $1 + [[ $IP6 ]] && net=$(extend_addr6 $net) + + if [[ -z $prefix ]]; then + min_ip=$net + max_ip=$net + else + # defining array for converting Decimal 2 Binary + # 00000000 00000001 00000010 00000011 00000100 ... + local d2b='{0..1}{0..1}{0..1}{0..1}{0..1}{0..1}{0..1}{0..1}' + [[ $IP6 ]] && d2b+=$d2b + eval local D2B=($d2b) + + local bitlen=$[ IP6 ? 128 : 32 ] + local remain=$[ bitlen-prefix ] + local octet=$[ IP6 ? 16 : 8 ] + local min_mask max_mask + local min max + local ip_bit + local ip sep + + # set separator for each IP(v4/v6) + [[ $IP6 ]] && sep=: || sep=. + IFS=$sep read -ra ip <<< $net + + min_mask="$(printf '1%.s' $(seq $prefix))$(printf '0%.s' $(seq $remain))" + max_mask="$(printf '0%.s' $(seq $prefix))$(printf '1%.s' $(seq $remain))" + + # calculate min/max ip with &,| operator + for i in "${!ip[@]}"; do + digit=$[ IP6 ? 16#${ip[$i]} : ${ip[$i]} ] + ip_bit=${D2B[$digit]} + + idx=$[ octet*i ] + min[$i]=$[ 2#$ip_bit & 2#${min_mask:$idx:$octet} ] + max[$i]=$[ 2#$ip_bit | 2#${max_mask:$idx:$octet} ] + [[ $IP6 ]] && { min[$i]=$(printf '%X' ${min[$i]}); + max[$i]=$(printf '%X' ${max[$i]}); } + done + + min_ip=$(IFS=$sep; echo "${min[*]}") + max_ip=$(IFS=$sep; echo "${max[*]}") + fi + + echo $min_ip $max_ip +} + +function parse_addr6() { parse_addr $@ ; } + +# Given a single or range of port(s), return minimum and maximum port number. +function parse_ports() +{ + local port_str=$1 + local port_list + local min_port + local max_port + + IFS="-" read -ra port_list <<< $port_str + + min_port=${port_list[0]} + max_port=${port_list[1]:-$min_port} + + echo $min_port $max_port +} + +# Given a minimum and maximum port, verify port number. +function validate_ports() +{ + local min_port=$1 + local max_port=$2 + + # 1 <= port <= 65535 + if (in_between $min_port 1 65535); then + if (in_between $max_port 1 65535); then + if [[ $min_port -le $max_port ]]; then + return 0 + fi + fi + fi + + err 5 "Invalid port(s): $min_port-$max_port" +} diff --git a/samples/pktgen/parameters.sh b/samples/pktgen/parameters.sh new file mode 100644 index 000000000..81906f199 --- /dev/null +++ b/samples/pktgen/parameters.sh @@ -0,0 +1,139 @@ +# +# SPDX-License-Identifier: GPL-2.0 +# Common parameter parsing for pktgen scripts +# + +function usage() { + echo "" + echo "Usage: $0 [-vx] -i ethX" + echo " -i : (\$DEV) output interface/device (required)" + echo " -s : (\$PKT_SIZE) packet size" + echo " -d : (\$DEST_IP) destination IP. CIDR (e.g. 198.18.0.0/15) is also allowed" + echo " -m : (\$DST_MAC) destination MAC-addr" + echo " -p : (\$DST_PORT) destination PORT range (e.g. 433-444) is also allowed" + echo " -k : (\$UDP_CSUM) enable UDP tx checksum" + echo " -t : (\$THREADS) threads to start" + echo " -f : (\$F_THREAD) index of first thread (zero indexed CPU number)" + echo " -c : (\$SKB_CLONE) SKB clones send before alloc new SKB" + echo " -n : (\$COUNT) num messages to send per thread, 0 means indefinitely" + echo " -b : (\$BURST) HW level bursting of SKBs" + echo " -v : (\$VERBOSE) verbose" + echo " -x : (\$DEBUG) debug" + echo " -6 : (\$IP6) IPv6" + echo " -w : (\$DELAY) Tx Delay value (ns)" + echo " -a : (\$APPEND) Script will not reset generator's state, but will append its config" + echo "" +} + +## --- Parse command line arguments / parameters --- +## echo "Commandline options:" +while getopts "s:i:d:m:p:f:t:c:n:b:w:vxh6ak" option; do + case $option in + i) # interface + export DEV=$OPTARG + info "Output device set to: DEV=$DEV" + ;; + s) + export PKT_SIZE=$OPTARG + info "Packet size set to: PKT_SIZE=$PKT_SIZE bytes" + ;; + d) # destination IP + export DEST_IP=$OPTARG + info "Destination IP set to: DEST_IP=$DEST_IP" + ;; + m) # MAC + export DST_MAC=$OPTARG + info "Destination MAC set to: DST_MAC=$DST_MAC" + ;; + p) # PORT + export DST_PORT=$OPTARG + info "Destination PORT set to: DST_PORT=$DST_PORT" + ;; + f) + export F_THREAD=$OPTARG + info "Index of first thread (zero indexed CPU number): $F_THREAD" + ;; + t) + export THREADS=$OPTARG + info "Number of threads to start: $THREADS" + ;; + c) + export CLONE_SKB=$OPTARG + info "CLONE_SKB=$CLONE_SKB" + ;; + n) + export COUNT=$OPTARG + info "COUNT=$COUNT" + ;; + b) + export BURST=$OPTARG + info "SKB bursting: BURST=$BURST" + ;; + w) + export DELAY=$OPTARG + info "DELAY=$DELAY" + ;; + v) + export VERBOSE=yes + info "Verbose mode: VERBOSE=$VERBOSE" + ;; + x) + export DEBUG=yes + info "Debug mode: DEBUG=$DEBUG" + ;; + 6) + export IP6=6 + info "IP6: IP6=$IP6" + ;; + a) + export APPEND=yes + info "Append mode: APPEND=$APPEND" + ;; + k) + export UDP_CSUM=yes + info "UDP tx checksum: UDP_CSUM=$UDP_CSUM" + ;; + h|?|*) + usage; + err 2 "[ERROR] Unknown parameters!!!" + esac +done +shift $(( $OPTIND - 1 )) + +if [ -z "$PKT_SIZE" ]; then + # NIC adds 4 bytes CRC + export PKT_SIZE=60 + info "Default packet size set to: set to: $PKT_SIZE bytes" +fi + +if [ -z "$F_THREAD" ]; then + # First thread (F_THREAD) reference the zero indexed CPU number + export F_THREAD=0 +fi + +if [ -z "$THREADS" ]; then + export THREADS=1 +fi + +# default DELAY +[ -z "$DELAY" ] && export DELAY=0 # Zero means max speed + +export L_THREAD=$(( THREADS + F_THREAD - 1 )) + +if [ -z "$DEV" ]; then + usage + err 2 "Please specify output device" +fi + +if [ -z "$DST_MAC" ]; then + warn "Missing destination MAC address" +fi + +if [ -z "$DEST_IP" ]; then + warn "Missing destination IP address" +fi + +if [ ! -d /proc/net/pktgen ]; then + info "Loading kernel module: pktgen" + modprobe pktgen +fi diff --git a/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh b/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh new file mode 100755 index 000000000..99ec0688b --- /dev/null +++ b/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh @@ -0,0 +1,109 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Benchmark script: +# - developed for benchmarking ingress qdisc path +# +# Script for injecting packets into RX path of the stack with pktgen +# "xmit_mode netif_receive". With an invalid dst_mac this will only +# measure the ingress code path as packets gets dropped in ip_rcv(). +# +# This script don't really need any hardware. It benchmarks software +# RX path just after NIC driver level. With bursting is also +# "removes" the SKB alloc/free overhead. +# +# Setup scenarios for measuring ingress qdisc (with invalid dst_mac): +# ------------------------------------------------------------------ +# (1) no ingress (uses static_key_false(&ingress_needed)) +# +# (2) ingress on other dev (change ingress_needed and calls +# handle_ing() but exit early) +# +# config: tc qdisc add dev $SOMEDEV handle ffff: ingress +# +# (3) ingress on this dev, handle_ing() -> tc_classify() +# +# config: tc qdisc add dev $DEV handle ffff: ingress +# +# (4) ingress on this dev + drop at u32 classifier/action. +# +basedir=`dirname $0` +source ${basedir}/functions.sh +root_check_run_with_sudo "$@" + +# Parameter parsing via include +source ${basedir}/parameters.sh +# Using invalid DST_MAC will cause the packets to get dropped in +# ip_rcv() which is part of the test +if [ -z "$DEST_IP" ]; then + [ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1" +fi +[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff" +[ -z "$BURST" ] && BURST=1024 +[ -z "$COUNT" ] && COUNT="10000000" # Zero means indefinitely +if [ -n "$DEST_IP" ]; then + validate_addr${IP6} $DEST_IP + read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP) +fi +if [ -n "$DST_PORT" ]; then + read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT) + validate_ports $UDP_DST_MIN $UDP_DST_MAX +fi + +# General cleanup everything since last run +pg_ctrl "reset" + +# Threads are specified with parameter -t value in $THREADS +for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do + # The device name is extended with @name, using thread number to + # make then unique, but any name will do. + dev=${DEV}@${thread} + + # Add remove all other devices and add_device $dev to thread + pg_thread $thread "rem_device_all" + pg_thread $thread "add_device" $dev + + # Base config of dev + pg_set $dev "flag QUEUE_MAP_CPU" + pg_set $dev "count $COUNT" + pg_set $dev "pkt_size $PKT_SIZE" + pg_set $dev "delay $DELAY" + pg_set $dev "flag NO_TIMESTAMP" + + # Destination + pg_set $dev "dst_mac $DST_MAC" + pg_set $dev "dst${IP6}_min $DST_MIN" + pg_set $dev "dst${IP6}_max $DST_MAX" + + if [ -n "$DST_PORT" ]; then + # Single destination port or random port range + pg_set $dev "flag UDPDST_RND" + pg_set $dev "udp_dst_min $UDP_DST_MIN" + pg_set $dev "udp_dst_max $UDP_DST_MAX" + fi + + # Inject packet into RX path of stack + pg_set $dev "xmit_mode netif_receive" + + # Burst allow us to avoid measuring SKB alloc/free overhead + pg_set $dev "burst $BURST" +done + +# Run if user hits control-c +function print_result() { + # Print results + for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do + dev=${DEV}@${thread} + echo "Device: $dev" + cat /proc/net/pktgen/$dev | grep -A2 "Result:" + done +} +# trap keyboard interrupt (Ctrl-C) +trap true SIGINT + +# start_run +echo "Running... ctrl^C to stop" >&2 +pg_ctrl "start" +echo "Done" >&2 + +print_result diff --git a/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh b/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh new file mode 100755 index 000000000..04b0dd0c3 --- /dev/null +++ b/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh @@ -0,0 +1,89 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Benchmark script: +# - developed for benchmarking egress qdisc path, derived (more +# like cut'n'pasted) from ingress benchmark script. +# +# Script for injecting packets into egress qdisc path of the stack +# with pktgen "xmit_mode queue_xmit". +# +basedir=`dirname $0` +source ${basedir}/functions.sh +root_check_run_with_sudo "$@" + +# Parameter parsing via include +source ${basedir}/parameters.sh +if [ -z "$DEST_IP" ]; then + [ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1" +fi +[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff" + +# Burst greater than 1 are invalid for queue_xmit mode +if [[ -n "$BURST" ]]; then + err 1 "Bursting not supported for this mode" +fi +[ -z "$COUNT" ] && COUNT="10000000" # Zero means indefinitely +if [ -n "$DEST_IP" ]; then + validate_addr${IP6} $DEST_IP + read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP) +fi +if [ -n "$DST_PORT" ]; then + read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT) + validate_ports $UDP_DST_MIN $UDP_DST_MAX +fi + +# General cleanup everything since last run +pg_ctrl "reset" + +# Threads are specified with parameter -t value in $THREADS +for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do + # The device name is extended with @name, using thread number to + # make then unique, but any name will do. + dev=${DEV}@${thread} + + # Add remove all other devices and add_device $dev to thread + pg_thread $thread "rem_device_all" + pg_thread $thread "add_device" $dev + + # Base config of dev + pg_set $dev "flag QUEUE_MAP_CPU" + pg_set $dev "count $COUNT" + pg_set $dev "pkt_size $PKT_SIZE" + pg_set $dev "delay $DELAY" + pg_set $dev "flag NO_TIMESTAMP" + + # Destination + pg_set $dev "dst_mac $DST_MAC" + pg_set $dev "dst${IP6}_min $DST_MIN" + pg_set $dev "dst${IP6}_max $DST_MAX" + + if [ -n "$DST_PORT" ]; then + # Single destination port or random port range + pg_set $dev "flag UDPDST_RND" + pg_set $dev "udp_dst_min $UDP_DST_MIN" + pg_set $dev "udp_dst_max $UDP_DST_MAX" + fi + + # Inject packet into TX qdisc egress path of stack + pg_set $dev "xmit_mode queue_xmit" +done + +# Run if user hits control-c +function print_result { + # Print results + for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do + dev=${DEV}@${thread} + echo "Device: $dev" + cat /proc/net/pktgen/$dev | grep -A2 "Result:" + done +} +# trap keyboard interrupt (Ctrl-C) +trap true SIGINT + +# start_run +echo "Running... ctrl^C to stop" >&2 +pg_ctrl "start" +echo "Done" >&2 + +print_result diff --git a/samples/pktgen/pktgen_sample01_simple.sh b/samples/pktgen/pktgen_sample01_simple.sh new file mode 100755 index 000000000..09a92ea96 --- /dev/null +++ b/samples/pktgen/pktgen_sample01_simple.sh @@ -0,0 +1,100 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Simple example: +# * pktgen sending with single thread and single interface +# * flow variation via random UDP source port +# +basedir=`dirname $0` +source ${basedir}/functions.sh +root_check_run_with_sudo "$@" + +# Parameter parsing via include +# - go look in parameters.sh to see which setting are avail +# - required param is the interface "-i" stored in $DEV +source ${basedir}/parameters.sh +# +# Set some default params, if they didn't get set +if [ -z "$DEST_IP" ]; then + [ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1" +fi +[ -z "$CLONE_SKB" ] && CLONE_SKB="0" +# Example enforce param "-m" for dst_mac +[ -z "$DST_MAC" ] && usage && err 2 "Must specify -m dst_mac" +[ -z "$COUNT" ] && COUNT="100000" # Zero means indefinitely +if [ -n "$DEST_IP" ]; then + validate_addr${IP6} $DEST_IP + read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP) +fi +if [ -n "$DST_PORT" ]; then + read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT) + validate_ports $UDP_DST_MIN $UDP_DST_MAX +fi + +# Flow variation random source port between min and max +UDP_SRC_MIN=9 +UDP_SRC_MAX=109 + +# General cleanup everything since last run +# (especially important if other threads were configured by other scripts) +[ -z "$APPEND" ] && pg_ctrl "reset" + +# Add remove all other devices and add_device $DEV to thread 0 +thread=0 +[ -z "$APPEND" ] && pg_thread $thread "rem_device_all" +pg_thread $thread "add_device" $DEV + +# How many packets to send (zero means indefinitely) +pg_set $DEV "count $COUNT" + +# Reduce alloc cost by sending same SKB many times +# - this obviously affects the randomness within the packet +pg_set $DEV "clone_skb $CLONE_SKB" + +# Set packet size +pg_set $DEV "pkt_size $PKT_SIZE" + +# Delay between packets (zero means max speed) +pg_set $DEV "delay $DELAY" + +# Flag example disabling timestamping +pg_set $DEV "flag NO_TIMESTAMP" + +# Destination +pg_set $DEV "dst_mac $DST_MAC" +pg_set $DEV "dst${IP6}_min $DST_MIN" +pg_set $DEV "dst${IP6}_max $DST_MAX" + +if [ -n "$DST_PORT" ]; then + # Single destination port or random port range + pg_set $DEV "flag UDPDST_RND" + pg_set $DEV "udp_dst_min $UDP_DST_MIN" + pg_set $DEV "udp_dst_max $UDP_DST_MAX" +fi + +[ ! -z "$UDP_CSUM" ] && pg_set $dev "flag UDPCSUM" + +# Setup random UDP port src range +pg_set $DEV "flag UDPSRC_RND" +pg_set $DEV "udp_src_min $UDP_SRC_MIN" +pg_set $DEV "udp_src_max $UDP_SRC_MAX" + +# Run if user hits control-c +function print_result() { + # Print results + echo "Result device: $DEV" + cat /proc/net/pktgen/$DEV +} +# trap keyboard interrupt (Ctrl-C) +trap true SIGINT + +if [ -z "$APPEND" ]; then + # start_run + echo "Running... ctrl^C to stop" >&2 + pg_ctrl "start" + echo "Done" >&2 + + print_result +else + echo "Append mode: config done. Do more or use 'pg_ctrl start' to run" +fi
\ No newline at end of file diff --git a/samples/pktgen/pktgen_sample02_multiqueue.sh b/samples/pktgen/pktgen_sample02_multiqueue.sh new file mode 100755 index 000000000..7fa41c84c --- /dev/null +++ b/samples/pktgen/pktgen_sample02_multiqueue.sh @@ -0,0 +1,107 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Multiqueue: Using pktgen threads for sending on multiple CPUs +# * adding devices to kernel threads +# * notice the naming scheme for keeping device names unique +# * nameing scheme: dev@thread_number +# * flow variation via random UDP source port +# +basedir=`dirname $0` +source ${basedir}/functions.sh +root_check_run_with_sudo "$@" +# +# Required param: -i dev in $DEV +source ${basedir}/parameters.sh + +[ -z "$COUNT" ] && COUNT="100000" # Zero means indefinitely + +# Base Config +[ -z "$CLONE_SKB" ] && CLONE_SKB="0" + +# Flow variation random source port between min and max +UDP_SRC_MIN=9 +UDP_SRC_MAX=109 + +# (example of setting default params in your script) +if [ -z "$DEST_IP" ]; then + [ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1" +fi +[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff" +if [ -n "$DEST_IP" ]; then + validate_addr${IP6} $DEST_IP + read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP) +fi +if [ -n "$DST_PORT" ]; then + read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT) + validate_ports $UDP_DST_MIN $UDP_DST_MAX +fi + +# General cleanup everything since last run +[ -z "$APPEND" ] && pg_ctrl "reset" + +# Threads are specified with parameter -t value in $THREADS +for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do + # The device name is extended with @name, using thread number to + # make then unique, but any name will do. + dev=${DEV}@${thread} + + # Add remove all other devices and add_device $dev to thread + [ -z "$APPEND" ] && pg_thread $thread "rem_device_all" + pg_thread $thread "add_device" $dev + + # Notice config queue to map to cpu (mirrors smp_processor_id()) + # It is beneficial to map IRQ /proc/irq/*/smp_affinity 1:1 to CPU number + pg_set $dev "flag QUEUE_MAP_CPU" + + # Base config of dev + pg_set $dev "count $COUNT" + pg_set $dev "clone_skb $CLONE_SKB" + pg_set $dev "pkt_size $PKT_SIZE" + pg_set $dev "delay $DELAY" + + # Flag example disabling timestamping + pg_set $dev "flag NO_TIMESTAMP" + + # Destination + pg_set $dev "dst_mac $DST_MAC" + pg_set $dev "dst${IP6}_min $DST_MIN" + pg_set $dev "dst${IP6}_max $DST_MAX" + + if [ -n "$DST_PORT" ]; then + # Single destination port or random port range + pg_set $dev "flag UDPDST_RND" + pg_set $dev "udp_dst_min $UDP_DST_MIN" + pg_set $dev "udp_dst_max $UDP_DST_MAX" + fi + + [ ! -z "$UDP_CSUM" ] && pg_set $dev "flag UDPCSUM" + + # Setup random UDP port src range + pg_set $dev "flag UDPSRC_RND" + pg_set $dev "udp_src_min $UDP_SRC_MIN" + pg_set $dev "udp_src_max $UDP_SRC_MAX" +done + +# Run if user hits control-c +function print_result() { + # Print results + for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do + dev=${DEV}@${thread} + echo "Device: $dev" + cat /proc/net/pktgen/$dev | grep -A2 "Result:" + done +} +# trap keyboard interrupt (Ctrl-C) +trap true SIGINT + +if [ -z "$APPEND" ]; then + # start_run + echo "Running... ctrl^C to stop" >&2 + pg_ctrl "start" + echo "Done" >&2 + + print_result +else + echo "Append mode: config done. Do more or use 'pg_ctrl start' to run" +fi diff --git a/samples/pktgen/pktgen_sample03_burst_single_flow.sh b/samples/pktgen/pktgen_sample03_burst_single_flow.sh new file mode 100755 index 000000000..8bf2fdffb --- /dev/null +++ b/samples/pktgen/pktgen_sample03_burst_single_flow.sh @@ -0,0 +1,106 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Script for max single flow performance +# - If correctly tuned[1], single CPU 10G wirespeed small pkts is possible[2] +# +# Using pktgen "burst" option (use -b $N) +# - To boost max performance +# - Avail since: kernel v3.18 +# * commit 38b2cf2982dc73 ("net: pktgen: packet bursting via skb->xmit_more") +# - This avoids writing the HW tailptr on every driver xmit +# - The performance boost is impressive, see commit and blog [2] +# +# Notice: On purpose generates a single (UDP) flow towards target, +# reason behind this is to only overload/activate a single CPU on +# target host. And no randomness for pktgen also makes it faster. +# +# Tuning see: +# [1] http://netoptimizer.blogspot.dk/2014/06/pktgen-for-network-overload-testing.html +# [2] http://netoptimizer.blogspot.dk/2014/10/unlocked-10gbps-tx-wirespeed-smallest.html +# +basedir=`dirname $0` +source ${basedir}/functions.sh +root_check_run_with_sudo "$@" + +# Parameter parsing via include +source ${basedir}/parameters.sh +# Set some default params, if they didn't get set +if [ -z "$DEST_IP" ]; then + [ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1" +fi +[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff" +[ -z "$BURST" ] && BURST=32 +[ -z "$CLONE_SKB" ] && CLONE_SKB="0" # No need for clones when bursting +[ -z "$COUNT" ] && COUNT="0" # Zero means indefinitely +if [ -n "$DEST_IP" ]; then + validate_addr${IP6} $DEST_IP + read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP) +fi +if [ -n "$DST_PORT" ]; then + read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT) + validate_ports $UDP_DST_MIN $UDP_DST_MAX +fi + +# General cleanup everything since last run +[ -z "$APPEND" ] && pg_ctrl "reset" + +# Threads are specified with parameter -t value in $THREADS +for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do + dev=${DEV}@${thread} + + # Add remove all other devices and add_device $dev to thread + [ -z "$APPEND" ] && pg_thread $thread "rem_device_all" + pg_thread $thread "add_device" $dev + + # Base config + pg_set $dev "flag QUEUE_MAP_CPU" + pg_set $dev "count $COUNT" + pg_set $dev "clone_skb $CLONE_SKB" + pg_set $dev "pkt_size $PKT_SIZE" + pg_set $dev "delay $DELAY" + pg_set $dev "flag NO_TIMESTAMP" + + # Destination + pg_set $dev "dst_mac $DST_MAC" + pg_set $dev "dst${IP6}_min $DST_MIN" + pg_set $dev "dst${IP6}_max $DST_MAX" + + if [ -n "$DST_PORT" ]; then + # Single destination port or random port range + pg_set $dev "flag UDPDST_RND" + pg_set $dev "udp_dst_min $UDP_DST_MIN" + pg_set $dev "udp_dst_max $UDP_DST_MAX" + fi + + [ ! -z "$UDP_CSUM" ] && pg_set $dev "flag UDPCSUM" + + # Setup burst, for easy testing -b 0 disable bursting + # (internally in pktgen default and minimum burst=1) + if [[ ${BURST} -ne 0 ]]; then + pg_set $dev "burst $BURST" + else + info "$dev: Not using burst" + fi +done + +# Run if user hits control-c +function print_result() { + # Print results + for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do + dev=${DEV}@${thread} + echo "Device: $dev" + cat /proc/net/pktgen/$dev | grep -A2 "Result:" + done +} +# trap keyboard interrupt (Ctrl-C) +trap true SIGINT + +if [ -z "$APPEND" ]; then + echo "Running... ctrl^C to stop" >&2 + pg_ctrl "start" + + print_result +else + echo "Append mode: config done. Do more or use 'pg_ctrl start' to run" +fi diff --git a/samples/pktgen/pktgen_sample04_many_flows.sh b/samples/pktgen/pktgen_sample04_many_flows.sh new file mode 100755 index 000000000..cff51f861 --- /dev/null +++ b/samples/pktgen/pktgen_sample04_many_flows.sh @@ -0,0 +1,118 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Script example for many flows testing +# +# Number of simultaneous flows limited by variable $FLOWS +# and number of packets per flow controlled by variable $FLOWLEN +# +basedir=`dirname $0` +source ${basedir}/functions.sh +root_check_run_with_sudo "$@" + +# Parameter parsing via include +source ${basedir}/parameters.sh +# Set some default params, if they didn't get set +if [ -z "$DEST_IP" ]; then + [ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1" +fi +[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff" +[ -z "$CLONE_SKB" ] && CLONE_SKB="0" +[ -z "$COUNT" ] && COUNT="0" # Zero means indefinitely +if [ -n "$DEST_IP" ]; then + validate_addr${IP6} $DEST_IP + read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP) +fi +if [ -n "$DST_PORT" ]; then + read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT) + validate_ports $UDP_DST_MIN $UDP_DST_MAX +fi + +# NOTICE: Script specific settings +# ======= +# Limiting the number of concurrent flows ($FLOWS) +# and also set how many packets each flow contains ($FLOWLEN) +# +[ -z "$FLOWS" ] && FLOWS="8000" +[ -z "$FLOWLEN" ] && FLOWLEN="10" + +if [[ -n "$BURST" ]]; then + err 1 "Bursting not supported for this mode" +fi + +# 198.18.0.0 / 198.19.255.255 +read -r SRC_MIN SRC_MAX <<< $(parse_addr 198.18.0.0/15) + +# General cleanup everything since last run +[ -z "$APPEND" ] && pg_ctrl "reset" + +# Threads are specified with parameter -t value in $THREADS +for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do + dev=${DEV}@${thread} + + # Add remove all other devices and add_device $dev to thread + [ -z "$APPEND" ] && pg_thread $thread "rem_device_all" + pg_thread $thread "add_device" $dev + + # Base config + pg_set $dev "flag QUEUE_MAP_CPU" + pg_set $dev "count $COUNT" + pg_set $dev "clone_skb $CLONE_SKB" + pg_set $dev "pkt_size $PKT_SIZE" + pg_set $dev "delay $DELAY" + pg_set $dev "flag NO_TIMESTAMP" + + # Single destination + pg_set $dev "dst_mac $DST_MAC" + pg_set $dev "dst${IP6}_min $DST_MIN" + pg_set $dev "dst${IP6}_max $DST_MAX" + + if [ -n "$DST_PORT" ]; then + # Single destination port or random port range + pg_set $dev "flag UDPDST_RND" + pg_set $dev "udp_dst_min $UDP_DST_MIN" + pg_set $dev "udp_dst_max $UDP_DST_MAX" + fi + + [ ! -z "$UDP_CSUM" ] && pg_set $dev "flag UDPCSUM" + + # Randomize source IP-addresses + pg_set $dev "flag IPSRC_RND" + pg_set $dev "src_min $SRC_MIN" + pg_set $dev "src_max $SRC_MAX" + + # Limit number of flows (max 65535) + pg_set $dev "flows $FLOWS" + # + # How many packets a flow will send, before flow "entry" is + # re-generated/setup. + pg_set $dev "flowlen $FLOWLEN" + # + # Flag FLOW_SEQ will cause $FLOWLEN packets from the same flow + # being send back-to-back, before next flow is selected + # incrementally. This helps lookup caches, and is more realistic. + # + pg_set $dev "flag FLOW_SEQ" + +done + +# Run if user hits control-c +function print_result() { + # Print results + for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do + dev=${DEV}@${thread} + echo "Device: $dev" + cat /proc/net/pktgen/$dev | grep -A2 "Result:" + done +} +# trap keyboard interrupt (Ctrl-C) +trap true SIGINT + +if [ -z "$APPEND" ]; then + echo "Running... ctrl^C to stop" >&2 + pg_ctrl "start" + + print_result +else + echo "Append mode: config done. Do more or use 'pg_ctrl start' to run" +fi diff --git a/samples/pktgen/pktgen_sample05_flow_per_thread.sh b/samples/pktgen/pktgen_sample05_flow_per_thread.sh new file mode 100755 index 000000000..3578d0aa4 --- /dev/null +++ b/samples/pktgen/pktgen_sample05_flow_per_thread.sh @@ -0,0 +1,102 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Script will generate one flow per thread (-t N) +# - Same destination IP +# - Fake source IPs for each flow (fixed based on thread number) +# +# Useful for scale testing on receiver, to see whether silo'ing flows +# works and scales. For optimal scalability (on receiver) each +# separate-flow should not access shared variables/data. This script +# helps magnify any of these scaling issues by overloading the receiver. +# +basedir=`dirname $0` +source ${basedir}/functions.sh +root_check_run_with_sudo "$@" + +# Parameter parsing via include +source ${basedir}/parameters.sh +# Set some default params, if they didn't get set +if [ -z "$DEST_IP" ]; then + [ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1" +fi +[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff" +[ -z "$CLONE_SKB" ] && CLONE_SKB="0" +[ -z "$BURST" ] && BURST=32 +[ -z "$COUNT" ] && COUNT="0" # Zero means indefinitely +if [ -n "$DEST_IP" ]; then + validate_addr${IP6} $DEST_IP + read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP) +fi +if [ -n "$DST_PORT" ]; then + read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT) + validate_ports $UDP_DST_MIN $UDP_DST_MAX +fi + +# General cleanup everything since last run +[ -z "$APPEND" ] && pg_ctrl "reset" + +# Threads are specified with parameter -t value in $THREADS +for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do + dev=${DEV}@${thread} + + # Add remove all other devices and add_device $dev to thread + [ -z "$APPEND" ] && pg_thread $thread "rem_device_all" + pg_thread $thread "add_device" $dev + + # Base config + pg_set $dev "flag QUEUE_MAP_CPU" + pg_set $dev "count $COUNT" + pg_set $dev "clone_skb $CLONE_SKB" + pg_set $dev "pkt_size $PKT_SIZE" + pg_set $dev "delay $DELAY" + pg_set $dev "flag NO_TIMESTAMP" + + # Single destination + pg_set $dev "dst_mac $DST_MAC" + pg_set $dev "dst${IP6}_min $DST_MIN" + pg_set $dev "dst${IP6}_max $DST_MAX" + + if [ -n "$DST_PORT" ]; then + # Single destination port or random port range + pg_set $dev "flag UDPDST_RND" + pg_set $dev "udp_dst_min $UDP_DST_MIN" + pg_set $dev "udp_dst_max $UDP_DST_MAX" + fi + + [ ! -z "$UDP_CSUM" ] && pg_set $dev "flag UDPCSUM" + + # Setup source IP-addresses based on thread number + pg_set $dev "src_min 198.18.$((thread+1)).1" + pg_set $dev "src_max 198.18.$((thread+1)).1" + + # Setup burst, for easy testing -b 0 disable bursting + # (internally in pktgen default and minimum burst=1) + if [[ ${BURST} -ne 0 ]]; then + pg_set $dev "burst $BURST" + else + info "$dev: Not using burst" + fi + +done + +# Run if user hits control-c +function print_result() { + # Print results + for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do + dev=${DEV}@${thread} + echo "Device: $dev" + cat /proc/net/pktgen/$dev | grep -A2 "Result:" + done +} +# trap keyboard interrupt (Ctrl-C) +trap true SIGINT + +if [ -z "$APPEND" ]; then + echo "Running... ctrl^C to stop" >&2 + pg_ctrl "start" + + print_result +else + echo "Append mode: config done. Do more or use 'pg_ctrl start' to run" +fi diff --git a/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh b/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh new file mode 100755 index 000000000..264cc5db9 --- /dev/null +++ b/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh @@ -0,0 +1,125 @@ +#!/bin/bash +# +# Multiqueue: Using pktgen threads for sending on multiple CPUs +# * adding devices to kernel threads which are in the same NUMA node +# * bound devices queue's irq affinity to the threads, 1:1 mapping +# * notice the naming scheme for keeping device names unique +# * nameing scheme: dev@thread_number +# * flow variation via random UDP source port +# +basedir=`dirname $0` +source ${basedir}/functions.sh +root_check_run_with_sudo "$@" +# +# Required param: -i dev in $DEV +source ${basedir}/parameters.sh + +# Base Config +[ -z "$COUNT" ] && COUNT="20000000" # Zero means indefinitely +[ -z "$CLONE_SKB" ] && CLONE_SKB="0" + +# Flow variation random source port between min and max +UDP_SRC_MIN=9 +UDP_SRC_MAX=109 + +node=`get_iface_node $DEV` +irq_array=(`get_iface_irqs $DEV`) +cpu_array=(`get_node_cpus $node`) + +[ $THREADS -gt ${#irq_array[*]} -o $THREADS -gt ${#cpu_array[*]} ] && \ + err 1 "Thread number $THREADS exceeds: min (${#irq_array[*]},${#cpu_array[*]})" + +# (example of setting default params in your script) +if [ -z "$DEST_IP" ]; then + [ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1" +fi +[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff" +if [ -n "$DEST_IP" ]; then + validate_addr${IP6} $DEST_IP + read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP) +fi +if [ -n "$DST_PORT" ]; then + read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT) + validate_ports $UDP_DST_MIN $UDP_DST_MAX +fi + +# General cleanup everything since last run +[ -z "$APPEND" ] && pg_ctrl "reset" + +# Threads are specified with parameter -t value in $THREADS +for ((i = 0; i < $THREADS; i++)); do + # The device name is extended with @name, using thread number to + # make then unique, but any name will do. + # Set the queue's irq affinity to this $thread (processor) + # if '-f' is designated, offset cpu id + thread=${cpu_array[$((i+F_THREAD))]} + dev=${DEV}@${thread} + echo $thread > /proc/irq/${irq_array[$i]}/smp_affinity_list + info "irq ${irq_array[$i]} is set affinity to `cat /proc/irq/${irq_array[$i]}/smp_affinity_list`" + + # Add remove all other devices and add_device $dev to thread + [ -z "$APPEND" ] && pg_thread $thread "rem_device_all" + pg_thread $thread "add_device" $dev + + # select queue and bind the queue and $dev in 1:1 relationship + queue_num=$i + info "queue number is $queue_num" + pg_set $dev "queue_map_min $queue_num" + pg_set $dev "queue_map_max $queue_num" + + # Notice config queue to map to cpu (mirrors smp_processor_id()) + # It is beneficial to map IRQ /proc/irq/*/smp_affinity 1:1 to CPU number + pg_set $dev "flag QUEUE_MAP_CPU" + + # Base config of dev + pg_set $dev "count $COUNT" + pg_set $dev "clone_skb $CLONE_SKB" + pg_set $dev "pkt_size $PKT_SIZE" + pg_set $dev "delay $DELAY" + + # Flag example disabling timestamping + pg_set $dev "flag NO_TIMESTAMP" + + # Destination + pg_set $dev "dst_mac $DST_MAC" + pg_set $dev "dst${IP6}_min $DST_MIN" + pg_set $dev "dst${IP6}_max $DST_MAX" + + if [ -n "$DST_PORT" ]; then + # Single destination port or random port range + pg_set $dev "flag UDPDST_RND" + pg_set $dev "udp_dst_min $UDP_DST_MIN" + pg_set $dev "udp_dst_max $UDP_DST_MAX" + fi + + [ ! -z "$UDP_CSUM" ] && pg_set $dev "flag UDPCSUM" + + # Setup random UDP port src range + pg_set $dev "flag UDPSRC_RND" + pg_set $dev "udp_src_min $UDP_SRC_MIN" + pg_set $dev "udp_src_max $UDP_SRC_MAX" +done + +# Run if user hits control-c +function print_result() { + # Print results + for ((i = 0; i < $THREADS; i++)); do + thread=${cpu_array[$((i+F_THREAD))]} + dev=${DEV}@${thread} + echo "Device: $dev" + cat /proc/net/pktgen/$dev | grep -A2 "Result:" + done +} +# trap keyboard interrupt (Ctrl-C) +trap true SIGINT + +# start_run +if [ -z "$APPEND" ]; then + echo "Running... ctrl^C to stop" >&2 + pg_ctrl "start" + echo "Done" >&2 + + print_result +else + echo "Append mode: config done. Do more or use 'pg_ctrl start' to run" +fi |