diff options
Diffstat (limited to '')
| -rwxr-xr-x | scripts/kconfig/streamline_config.pl | 706 |
1 files changed, 706 insertions, 0 deletions
diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl new file mode 100755 index 000000000..3387ad750 --- /dev/null +++ b/scripts/kconfig/streamline_config.pl @@ -0,0 +1,706 @@ +#!/usr/bin/env perl +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright 2005-2009 - Steven Rostedt +# +# It's simple enough to figure out how this works. +# If not, then you can ask me at stripconfig@goodmis.org +# +# What it does? +# +# If you have installed a Linux kernel from a distribution +# that turns on way too many modules than you need, and +# you only want the modules you use, then this program +# is perfect for you. +# +# It gives you the ability to turn off all the modules that are +# not loaded on your system. +# +# Howto: +# +# 1. Boot up the kernel that you want to stream line the config on. +# 2. Change directory to the directory holding the source of the +# kernel that you just booted. +# 3. Copy the configuration file to this directory as .config +# 4. Have all your devices that you need modules for connected and +# operational (make sure that their corresponding modules are loaded) +# 5. Run this script redirecting the output to some other file +# like config_strip. +# 6. Back up your old config (if you want too). +# 7. copy the config_strip file to .config +# 8. Run "make oldconfig" +# +# Now your kernel is ready to be built with only the modules that +# are loaded. +# +# Here's what I did with my Debian distribution. +# +# cd /usr/src/linux-2.6.10 +# cp /boot/config-2.6.10-1-686-smp .config +# ~/bin/streamline_config > config_strip +# mv .config config_sav +# mv config_strip .config +# make oldconfig +# +use warnings; +use strict; +use Getopt::Long; + +# set the environment variable LOCALMODCONFIG_DEBUG to get +# debug output. +my $debugprint = 0; +$debugprint = 1 if (defined($ENV{LOCALMODCONFIG_DEBUG})); + +sub dprint { + return if (!$debugprint); + print STDERR @_; +} + +my $uname = `uname -r`; +chomp $uname; + +my @searchconfigs = ( + { + "file" => ".config", + "exec" => "cat", + }, + { + "file" => "/proc/config.gz", + "exec" => "zcat", + }, + { + "file" => "/boot/config-$uname", + "exec" => "cat", + }, + { + "file" => "/boot/vmlinuz-$uname", + "exec" => "scripts/extract-ikconfig", + "test" => "scripts/extract-ikconfig", + }, + { + "file" => "vmlinux", + "exec" => "scripts/extract-ikconfig", + "test" => "scripts/extract-ikconfig", + }, + { + "file" => "/lib/modules/$uname/kernel/kernel/configs.ko", + "exec" => "scripts/extract-ikconfig", + "test" => "scripts/extract-ikconfig", + }, + { + "file" => "kernel/configs.ko", + "exec" => "scripts/extract-ikconfig", + "test" => "scripts/extract-ikconfig", + }, + { + "file" => "kernel/configs.o", + "exec" => "scripts/extract-ikconfig", + "test" => "scripts/extract-ikconfig", + }, +); + +sub read_config { + foreach my $conf (@searchconfigs) { + my $file = $conf->{"file"}; + + next if ( ! -f "$file"); + + if (defined($conf->{"test"})) { + `$conf->{"test"} $conf->{"file"} 2>/dev/null`; + next if ($?); + } + + my $exec = $conf->{"exec"}; + + print STDERR "using config: '$file'\n"; + + open(my $infile, '-|', "$exec $file") || die "Failed to run $exec $file"; + my @x = <$infile>; + close $infile; + return @x; + } + die "No config file found"; +} + +my @config_file = read_config; + +# Parse options +my $localmodconfig = 0; +my $localyesconfig = 0; + +GetOptions("localmodconfig" => \$localmodconfig, + "localyesconfig" => \$localyesconfig); + +# Get the build source and top level Kconfig file (passed in) +my $ksource = ($ARGV[0] ? $ARGV[0] : '.'); +my $kconfig = $ARGV[1]; +my $lsmod_file = $ENV{'LSMOD'}; + +my @makefiles = `find $ksource -name Makefile -or -name Kbuild 2>/dev/null`; +chomp @makefiles; + +my %depends; +my %selects; +my %prompts; +my %objects; +my %config2kfile; +my $var; +my $iflevel = 0; +my @ifdeps; + +# prevent recursion +my %read_kconfigs; + +sub read_kconfig { + my ($kconfig) = @_; + + my $state = "NONE"; + my $config; + + my $cont = 0; + my $line; + + my $source = "$ksource/$kconfig"; + my $last_source = ""; + + # Check for any environment variables used + while ($source =~ /\$\((\w+)\)/ && $last_source ne $source) { + my $env = $1; + $last_source = $source; + $source =~ s/\$\($env\)/$ENV{$env}/; + } + + open(my $kinfile, '<', $source) || die "Can't open $source"; + while (<$kinfile>) { + chomp; + + # Make sure that lines ending with \ continue + if ($cont) { + $_ = $line . " " . $_; + } + + if (s/\\$//) { + $cont = 1; + $line = $_; + next; + } + + $cont = 0; + + # collect any Kconfig sources + if (/^source\s+"?([^"]+)/) { + my $kconfig = $1; + # prevent reading twice. + if (!defined($read_kconfigs{$kconfig})) { + $read_kconfigs{$kconfig} = 1; + read_kconfig($kconfig); + } + next; + } + + # configs found + if (/^\s*(menu)?config\s+(\S+)\s*$/) { + $state = "NEW"; + $config = $2; + $config2kfile{"CONFIG_$config"} = $kconfig; + + # Add depends for 'if' nesting + for (my $i = 0; $i < $iflevel; $i++) { + if ($i) { + $depends{$config} .= " " . $ifdeps[$i]; + } else { + $depends{$config} = $ifdeps[$i]; + } + $state = "DEP"; + } + + # collect the depends for the config + } elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) { + $state = "DEP"; + $depends{$config} = $1; + } elsif ($state eq "DEP" && /^\s*depends\s+on\s+(.*)$/) { + $depends{$config} .= " " . $1; + } elsif ($state eq "DEP" && /^\s*def(_(bool|tristate)|ault)\s+(\S.*)$/) { + my $dep = $3; + if ($dep !~ /^\s*(y|m|n)\s*$/) { + $dep =~ s/.*\sif\s+//; + $depends{$config} .= " " . $dep; + dprint "Added default depends $dep to $config\n"; + } + + # Get the configs that select this config + } elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) { + my $conf = $1; + if (defined($selects{$conf})) { + $selects{$conf} .= " " . $config; + } else { + $selects{$conf} = $config; + } + + # configs without prompts must be selected + } elsif ($state ne "NONE" && /^\s*(tristate\s+\S|prompt\b)/) { + # note if the config has a prompt + $prompts{$config} = 1; + + # Check for if statements + } elsif (/^if\s+(.*\S)\s*$/) { + my $deps = $1; + # remove beginning and ending non text + $deps =~ s/^[^a-zA-Z0-9_]*//; + $deps =~ s/[^a-zA-Z0-9_]*$//; + + my @deps = split /[^a-zA-Z0-9_]+/, $deps; + + $ifdeps[$iflevel++] = join ':', @deps; + + } elsif (/^endif/) { + + $iflevel-- if ($iflevel); + + # stop on "help" and keywords that end a menu entry + } elsif (/^\s*(---)?help(---)?\s*$/ || /^(comment|choice|menu)\b/) { + $state = "NONE"; + } + } + close($kinfile); +} + +if ($kconfig) { + read_kconfig($kconfig); +} + +# Makefiles can use variables to define their dependencies +sub convert_vars { + my ($line, %vars) = @_; + + my $process = ""; + + while ($line =~ s/^(.*?)(\$\((.*?)\))//) { + my $start = $1; + my $variable = $2; + my $var = $3; + + if (defined($vars{$var})) { + $process .= $start . $vars{$var}; + } else { + $process .= $start . $variable; + } + } + + $process .= $line; + + return $process; +} + +# Read all Makefiles to map the configs to the objects +foreach my $makefile (@makefiles) { + + my $line = ""; + my %make_vars; + + open(my $infile, '<', $makefile) || die "Can't open $makefile"; + while (<$infile>) { + # if this line ends with a backslash, continue + chomp; + if (/^(.*)\\$/) { + $line .= $1; + next; + } + + $line .= $_; + $_ = $line; + $line = ""; + + my $objs; + + # Convert variables in a line (could define configs) + $_ = convert_vars($_, %make_vars); + + # collect objects after obj-$(CONFIG_FOO_BAR) + if (/obj-\$\((CONFIG_[^\)]*)\)\s*[+:]?=\s*(.*)/) { + $var = $1; + $objs = $2; + + # check if variables are set + } elsif (/^\s*(\S+)\s*[:]?=\s*(.*\S)/) { + $make_vars{$1} = $2; + } + if (defined($objs)) { + foreach my $obj (split /\s+/,$objs) { + $obj =~ s/-/_/g; + if ($obj =~ /(.*)\.o$/) { + # Objects may be enabled by more than one config. + # Store configs in an array. + my @arr; + + if (defined($objects{$1})) { + @arr = @{$objects{$1}}; + } + + $arr[$#arr+1] = $var; + + # The objects have a hash mapping to a reference + # of an array of configs. + $objects{$1} = \@arr; + } + } + } + } + close($infile); +} + +my %modules; +my $linfile; + +if (defined($lsmod_file)) { + if ( ! -f $lsmod_file) { + if ( -f $ENV{'objtree'}."/".$lsmod_file) { + $lsmod_file = $ENV{'objtree'}."/".$lsmod_file; + } else { + die "$lsmod_file not found"; + } + } + + my $otype = ( -x $lsmod_file) ? '-|' : '<'; + open($linfile, $otype, $lsmod_file); + +} else { + + # see what modules are loaded on this system + my $lsmod; + + foreach my $dir ( ("/sbin", "/bin", "/usr/sbin", "/usr/bin") ) { + if ( -x "$dir/lsmod" ) { + $lsmod = "$dir/lsmod"; + last; + } + } + if (!defined($lsmod)) { + # try just the path + $lsmod = "lsmod"; + } + + open($linfile, '-|', $lsmod) || die "Can not call lsmod with $lsmod"; +} + +while (<$linfile>) { + next if (/^Module/); # Skip the first line. + if (/^(\S+)/) { + $modules{$1} = 1; + } +} +close ($linfile); + +# add to the configs hash all configs that are needed to enable +# a loaded module. This is a direct obj-${CONFIG_FOO} += bar.o +# where we know we need bar.o so we add FOO to the list. +my %configs; +foreach my $module (keys(%modules)) { + if (defined($objects{$module})) { + my @arr = @{$objects{$module}}; + foreach my $conf (@arr) { + $configs{$conf} = $module; + dprint "$conf added by direct ($module)\n"; + if ($debugprint) { + my $c=$conf; + $c =~ s/^CONFIG_//; + if (defined($depends{$c})) { + dprint " deps = $depends{$c}\n"; + } else { + dprint " no deps\n"; + } + } + } + } else { + # Most likely, someone has a custom (binary?) module loaded. + print STDERR "$module config not found!!\n"; + } +} + +# Read the current config, and see what is enabled. We want to +# ignore configs that we would not enable anyway. + +my %orig_configs; +my $valid = "A-Za-z_0-9"; + +foreach my $line (@config_file) { + $_ = $line; + + if (/(CONFIG_[$valid]*)=(m|y)/) { + $orig_configs{$1} = $2; + } +} + +my $repeat = 1; + +my $depconfig; + +# +# Note, we do not care about operands (like: &&, ||, !) we want to add any +# config that is in the depend list of another config. This script does +# not enable configs that are not already enabled. If we come across a +# config A that depends on !B, we can still add B to the list of depends +# to keep on. If A was on in the original config, B would not have been +# and B would not be turned on by this script. +# +sub parse_config_depends +{ + my ($p) = @_; + + while ($p =~ /[$valid]/) { + + if ($p =~ /^[^$valid]*([$valid]+)/) { + my $conf = "CONFIG_" . $1; + + $p =~ s/^[^$valid]*[$valid]+//; + + # We only need to process if the depend config is a module + if (!defined($orig_configs{$conf}) || $orig_configs{$conf} eq "y") { + next; + } + + if (!defined($configs{$conf})) { + # We must make sure that this config has its + # dependencies met. + $repeat = 1; # do again + dprint "$conf selected by depend $depconfig\n"; + $configs{$conf} = 1; + } + } else { + die "this should never happen"; + } + } +} + +# Select is treated a bit differently than depends. We call this +# when a config has no prompt and requires another config to be +# selected. We use to just select all configs that selected this +# config, but found that that can balloon into enabling hundreds +# of configs that we do not care about. +# +# The idea is we look at all the configs that select it. If one +# is already in our list of configs to enable, then there's nothing +# else to do. If there isn't, we pick the first config that was +# enabled in the original config and use that. +sub parse_config_selects +{ + my ($config, $p) = @_; + + my $next_config; + + while ($p =~ /[$valid]/) { + + if ($p =~ /^[^$valid]*([$valid]+)/) { + my $conf = "CONFIG_" . $1; + + $p =~ s/^[^$valid]*[$valid]+//; + + # Make sure that this config exists in the current .config file + if (!defined($orig_configs{$conf})) { + dprint "$conf not set for $config select\n"; + next; + } + + # Check if something other than a module selects this config + if (defined($orig_configs{$conf}) && $orig_configs{$conf} ne "m") { + dprint "$conf (non module) selects config, we are good\n"; + # we are good with this + return; + } + if (defined($configs{$conf})) { + dprint "$conf selects $config so we are good\n"; + # A set config selects this config, we are good + return; + } + # Set this config to be selected + if (!defined($next_config)) { + $next_config = $conf; + } + } else { + die "this should never happen"; + } + } + + # If no possible config selected this, then something happened. + if (!defined($next_config)) { + print STDERR "WARNING: $config is required, but nothing in the\n"; + print STDERR " current config selects it.\n"; + return; + } + + # If we are here, then we found no config that is set and + # selects this config. Repeat. + $repeat = 1; + # Make this config need to be selected + $configs{$next_config} = 1; + dprint "$next_config selected by select $config\n"; +} + +my %process_selects; + +# loop through all configs, select their dependencies. +sub loop_depend { + $repeat = 1; + + while ($repeat) { + $repeat = 0; + + forloop: + foreach my $config (keys %configs) { + + # If this config is not a module, we do not need to process it + if (defined($orig_configs{$config}) && $orig_configs{$config} ne "m") { + next forloop; + } + + $config =~ s/^CONFIG_//; + $depconfig = $config; + + if (defined($depends{$config})) { + # This config has dependencies. Make sure they are also included + parse_config_depends $depends{$config}; + } + + # If the config has no prompt, then we need to check if a config + # that is enabled selected it. Or if we need to enable one. + if (!defined($prompts{$config}) && defined($selects{$config})) { + $process_selects{$config} = 1; + } + } + } +} + +sub loop_select { + + foreach my $config (keys %process_selects) { + $config =~ s/^CONFIG_//; + + dprint "Process select $config\n"; + + # config has no prompt and must be selected. + parse_config_selects $config, $selects{$config}; + } +} + +while ($repeat) { + # Get the first set of configs and their dependencies. + loop_depend; + + $repeat = 0; + + # Now we need to see if we have to check selects; + loop_select; +} + +my %setconfigs; +my @preserved_kconfigs; +if (defined($ENV{'LMC_KEEP'})) { + @preserved_kconfigs = split(/:/,$ENV{LMC_KEEP}); +} + +sub in_preserved_kconfigs { + my $kconfig = $config2kfile{$_[0]}; + if (!defined($kconfig)) { + return 0; + } + foreach my $excl (@preserved_kconfigs) { + if($kconfig =~ /^$excl/) { + return 1; + } + } + return 0; +} + +# Finally, read the .config file and turn off any module enabled that +# we could not find a reason to keep enabled. +foreach my $line (@config_file) { + $_ = $line; + + if (/CONFIG_IKCONFIG/) { + if (/# CONFIG_IKCONFIG is not set/) { + # enable IKCONFIG at least as a module + print "CONFIG_IKCONFIG=m\n"; + # don't ask about PROC + print "# CONFIG_IKCONFIG_PROC is not set\n"; + } else { + print; + } + next; + } + + if (/CONFIG_MODULE_SIG_KEY="(.+)"/) { + my $orig_cert = $1; + my $default_cert = "certs/signing_key.pem"; + + # Check that the logic in this script still matches the one in Kconfig + if (!defined($depends{"MODULE_SIG_KEY"}) || + $depends{"MODULE_SIG_KEY"} !~ /"\Q$default_cert\E"/) { + print STDERR "WARNING: MODULE_SIG_KEY assertion failure, ", + "update needed to ", __FILE__, " line ", __LINE__, "\n"; + print; + } elsif ($orig_cert ne $default_cert && ! -f $orig_cert) { + print STDERR "Module signature verification enabled but ", + "module signing key \"$orig_cert\" not found. Resetting ", + "signing key to default value.\n"; + print "CONFIG_MODULE_SIG_KEY=\"$default_cert\"\n"; + } else { + print; + } + next; + } + + if (/CONFIG_SYSTEM_TRUSTED_KEYS="(.+)"/) { + my $orig_keys = $1; + + if (! -f $orig_keys) { + print STDERR "System keyring enabled but keys \"$orig_keys\" ", + "not found. Resetting keys to default value.\n"; + print "CONFIG_SYSTEM_TRUSTED_KEYS=\"\"\n"; + } else { + print; + } + next; + } + + if (/^(CONFIG.*)=(m|y)/) { + if (in_preserved_kconfigs($1)) { + dprint "Preserve config $1"; + print; + next; + } + if (defined($configs{$1})) { + if ($localyesconfig) { + $setconfigs{$1} = 'y'; + print "$1=y\n"; + next; + } else { + $setconfigs{$1} = $2; + } + } elsif ($2 eq "m") { + print "# $1 is not set\n"; + next; + } + } + print; +} + +# Integrity check, make sure all modules that we want enabled do +# indeed have their configs set. +loop: +foreach my $module (keys(%modules)) { + if (defined($objects{$module})) { + my @arr = @{$objects{$module}}; + foreach my $conf (@arr) { + if (defined($setconfigs{$conf})) { + next loop; + } + } + print STDERR "module $module did not have configs"; + foreach my $conf (@arr) { + print STDERR " " , $conf; + } + print STDERR "\n"; + } +} + +# vim: softtabstop=4 |