summaryrefslogtreecommitdiffstats
path: root/sound/pci/echoaudio/echoaudio_gml.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/pci/echoaudio/echoaudio_gml.c')
-rw-r--r--sound/pci/echoaudio/echoaudio_gml.c204
1 files changed, 204 insertions, 0 deletions
diff --git a/sound/pci/echoaudio/echoaudio_gml.c b/sound/pci/echoaudio/echoaudio_gml.c
new file mode 100644
index 000000000..248983fa2
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio_gml.c
@@ -0,0 +1,204 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+/* These functions are common for Gina24, Layla24 and Mona cards */
+
+
+/* ASIC status check - some cards have one or two ASICs that need to be
+loaded. Once that load is complete, this function is called to see if
+the load was successful.
+If this load fails, it does not necessarily mean that the hardware is
+defective - the external box may be disconnected or turned off. */
+static int check_asic_status(struct echoaudio *chip)
+{
+ u32 asic_status;
+
+ send_vector(chip, DSP_VC_TEST_ASIC);
+
+ /* The DSP will return a value to indicate whether or not the
+ ASIC is currently loaded */
+ if (read_dsp(chip, &asic_status) < 0) {
+ dev_err(chip->card->dev,
+ "check_asic_status: failed on read_dsp\n");
+ chip->asic_loaded = false;
+ return -EIO;
+ }
+
+ chip->asic_loaded = (asic_status == ASIC_ALREADY_LOADED);
+ return chip->asic_loaded ? 0 : -EIO;
+}
+
+
+
+/* Most configuration of Gina24, Layla24, or Mona is accomplished by writing
+the control register. write_control_reg sends the new control register
+value to the DSP. */
+static int write_control_reg(struct echoaudio *chip, u32 value, char force)
+{
+ __le32 reg_value;
+
+ /* Handle the digital input auto-mute */
+ if (chip->digital_in_automute)
+ value |= GML_DIGITAL_IN_AUTO_MUTE;
+ else
+ value &= ~GML_DIGITAL_IN_AUTO_MUTE;
+
+ dev_dbg(chip->card->dev, "write_control_reg: 0x%x\n", value);
+
+ /* Write the control register */
+ reg_value = cpu_to_le32(value);
+ if (reg_value != chip->comm_page->control_register || force) {
+ if (wait_handshake(chip))
+ return -EIO;
+ chip->comm_page->control_register = reg_value;
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_WRITE_CONTROL_REG);
+ }
+ return 0;
+}
+
+
+
+/* Gina24, Layla24, and Mona support digital input auto-mute. If the digital
+input auto-mute is enabled, the DSP will only enable the digital inputs if
+the card is syncing to a valid clock on the ADAT or S/PDIF inputs.
+If the auto-mute is disabled, the digital inputs are enabled regardless of
+what the input clock is set or what is connected. */
+static int set_input_auto_mute(struct echoaudio *chip, int automute)
+{
+ dev_dbg(chip->card->dev, "set_input_auto_mute %d\n", automute);
+
+ chip->digital_in_automute = automute;
+
+ /* Re-set the input clock to the current value - indirectly causes
+ the auto-mute flag to be sent to the DSP */
+ return set_input_clock(chip, chip->input_clock);
+}
+
+
+
+/* S/PDIF coax / S/PDIF optical / ADAT - switch */
+static int set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+ u8 previous_mode;
+ int err, i, o;
+
+ if (chip->bad_board)
+ return -EIO;
+
+ /* All audio channels must be closed before changing the digital mode */
+ if (snd_BUG_ON(chip->pipe_alloc_mask))
+ return -EAGAIN;
+
+ if (snd_BUG_ON(!(chip->digital_modes & (1 << mode))))
+ return -EINVAL;
+
+ previous_mode = chip->digital_mode;
+ err = dsp_set_digital_mode(chip, mode);
+
+ /* If we successfully changed the digital mode from or to ADAT,
+ then make sure all output, input and monitor levels are
+ updated by the DSP comm object. */
+ if (err >= 0 && previous_mode != mode &&
+ (previous_mode == DIGITAL_MODE_ADAT || mode == DIGITAL_MODE_ADAT)) {
+ spin_lock_irq(&chip->lock);
+ for (o = 0; o < num_busses_out(chip); o++)
+ for (i = 0; i < num_busses_in(chip); i++)
+ set_monitor_gain(chip, o, i,
+ chip->monitor_gain[o][i]);
+
+#ifdef ECHOCARD_HAS_INPUT_GAIN
+ for (i = 0; i < num_busses_in(chip); i++)
+ set_input_gain(chip, i, chip->input_gain[i]);
+ update_input_line_level(chip);
+#endif
+
+ for (o = 0; o < num_busses_out(chip); o++)
+ set_output_gain(chip, o, chip->output_gain[o]);
+ update_output_line_level(chip);
+ spin_unlock_irq(&chip->lock);
+ }
+
+ return err;
+}
+
+
+
+/* Set the S/PDIF output format */
+static int set_professional_spdif(struct echoaudio *chip, char prof)
+{
+ u32 control_reg;
+ int err;
+
+ /* Clear the current S/PDIF flags */
+ control_reg = le32_to_cpu(chip->comm_page->control_register);
+ control_reg &= GML_SPDIF_FORMAT_CLEAR_MASK;
+
+ /* Set the new S/PDIF flags depending on the mode */
+ control_reg |= GML_SPDIF_TWO_CHANNEL | GML_SPDIF_24_BIT |
+ GML_SPDIF_COPY_PERMIT;
+ if (prof) {
+ /* Professional mode */
+ control_reg |= GML_SPDIF_PRO_MODE;
+
+ switch (chip->sample_rate) {
+ case 32000:
+ control_reg |= GML_SPDIF_SAMPLE_RATE0 |
+ GML_SPDIF_SAMPLE_RATE1;
+ break;
+ case 44100:
+ control_reg |= GML_SPDIF_SAMPLE_RATE0;
+ break;
+ case 48000:
+ control_reg |= GML_SPDIF_SAMPLE_RATE1;
+ break;
+ }
+ } else {
+ /* Consumer mode */
+ switch (chip->sample_rate) {
+ case 32000:
+ control_reg |= GML_SPDIF_SAMPLE_RATE0 |
+ GML_SPDIF_SAMPLE_RATE1;
+ break;
+ case 48000:
+ control_reg |= GML_SPDIF_SAMPLE_RATE1;
+ break;
+ }
+ }
+
+ err = write_control_reg(chip, control_reg, false);
+ if (err)
+ return err;
+ chip->professional_spdif = prof;
+ dev_dbg(chip->card->dev, "set_professional_spdif to %s\n",
+ prof ? "Professional" : "Consumer");
+ return 0;
+}