summaryrefslogtreecommitdiffstats
path: root/tools/perf/Documentation/perf-arm-spe.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--tools/perf/Documentation/perf-arm-spe.txt218
1 files changed, 218 insertions, 0 deletions
diff --git a/tools/perf/Documentation/perf-arm-spe.txt b/tools/perf/Documentation/perf-arm-spe.txt
new file mode 100644
index 000000000..bf03222e9
--- /dev/null
+++ b/tools/perf/Documentation/perf-arm-spe.txt
@@ -0,0 +1,218 @@
+perf-arm-spe(1)
+================
+
+NAME
+----
+perf-arm-spe - Support for Arm Statistical Profiling Extension within Perf tools
+
+SYNOPSIS
+--------
+[verse]
+'perf record' -e arm_spe//
+
+DESCRIPTION
+-----------
+
+The SPE (Statistical Profiling Extension) feature provides accurate attribution of latencies and
+ events down to individual instructions. Rather than being interrupt-driven, it picks an
+instruction to sample and then captures data for it during execution. Data includes execution time
+in cycles. For loads and stores it also includes data address, cache miss events, and data origin.
+
+The sampling has 5 stages:
+
+ 1. Choose an operation
+ 2. Collect data about the operation
+ 3. Optionally discard the record based on a filter
+ 4. Write the record to memory
+ 5. Interrupt when the buffer is full
+
+Choose an operation
+~~~~~~~~~~~~~~~~~~~
+
+This is chosen from a sample population, for SPE this is an IMPLEMENTATION DEFINED choice of all
+architectural instructions or all micro-ops. Sampling happens at a programmable interval. The
+architecture provides a mechanism for the SPE driver to infer the minimum interval at which it should
+sample. This minimum interval is used by the driver if no interval is specified. A pseudo-random
+perturbation is also added to the sampling interval by default.
+
+Collect data about the operation
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Program counter, PMU events, timings and data addresses related to the operation are recorded.
+Sampling ensures there is only one sampled operation is in flight.
+
+Optionally discard the record based on a filter
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Based on programmable criteria, choose whether to keep the record or discard it. If the record is
+discarded then the flow stops here for this sample.
+
+Write the record to memory
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The record is appended to a memory buffer
+
+Interrupt when the buffer is full
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When the buffer fills, an interrupt is sent and the driver signals Perf to collect the records.
+Perf saves the raw data in the perf.data file.
+
+Opening the file
+----------------
+
+Up until this point no decoding of the SPE data was done by either the kernel or Perf. Only when the
+recorded file is opened with 'perf report' or 'perf script' does the decoding happen. When decoding
+the data, Perf generates "synthetic samples" as if these were generated at the time of the
+recording. These samples are the same as if normal sampling was done by Perf without using SPE,
+although they may have more attributes associated with them. For example a normal sample may have
+just the instruction pointer, but an SPE sample can have data addresses and latency attributes.
+
+Why Sampling?
+-------------
+
+ - Sampling, rather than tracing, cuts down the profiling problem to something more manageable for
+ hardware. Only one sampled operation is in flight at a time.
+
+ - Allows precise attribution data, including: Full PC of instruction, data virtual and physical
+ addresses.
+
+ - Allows correlation between an instruction and events, such as TLB and cache miss. (Data source
+ indicates which particular cache was hit, but the meaning is implementation defined because
+ different implementations can have different cache configurations.)
+
+However, SPE does not provide any call-graph information, and relies on statistical methods.
+
+Collisions
+----------
+
+When an operation is sampled while a previous sampled operation has not finished, a collision
+occurs. The new sample is dropped. Collisions affect the integrity of the data, so the sample rate
+should be set to avoid collisions.
+
+The 'sample_collision' PMU event can be used to determine the number of lost samples. Although this
+count is based on collisions _before_ filtering occurs. Therefore this can not be used as an exact
+number for samples dropped that would have made it through the filter, but can be a rough
+guide.
+
+The effect of microarchitectural sampling
+-----------------------------------------
+
+If an implementation samples micro-operations instead of instructions, the results of sampling must
+be weighted accordingly.
+
+For example, if a given instruction A is always converted into two micro-operations, A0 and A1, it
+becomes twice as likely to appear in the sample population.
+
+The coarse effect of conversions, and, if applicable, sampling of speculative operations, can be
+estimated from the 'sample_pop' and 'inst_retired' PMU events.
+
+Kernel Requirements
+-------------------
+
+The ARM_SPE_PMU config must be set to build as either a module or statically.
+
+Depending on CPU model, the kernel may need to be booted with page table isolation disabled
+(kpti=off). If KPTI needs to be disabled, this will fail with a console message "profiling buffer
+inaccessible. Try passing 'kpti=off' on the kernel command line".
+
+Capturing SPE with perf command-line tools
+------------------------------------------
+
+You can record a session with SPE samples:
+
+ perf record -e arm_spe// -- ./mybench
+
+The sample period is set from the -c option, and because the minimum interval is used by default
+it's recommended to set this to a higher value. The value is written to PMSIRR.INTERVAL.
+
+Config parameters
+~~~~~~~~~~~~~~~~~
+
+These are placed between the // in the event and comma separated. For example '-e
+arm_spe/load_filter=1,min_latency=10/'
+
+ branch_filter=1 - collect branches only (PMSFCR.B)
+ event_filter=<mask> - filter on specific events (PMSEVFR) - see bitfield description below
+ jitter=1 - use jitter to avoid resonance when sampling (PMSIRR.RND)
+ load_filter=1 - collect loads only (PMSFCR.LD)
+ min_latency=<n> - collect only samples with this latency or higher* (PMSLATFR)
+ pa_enable=1 - collect physical address (as well as VA) of loads/stores (PMSCR.PA) - requires privilege
+ pct_enable=1 - collect physical timestamp instead of virtual timestamp (PMSCR.PCT) - requires privilege
+ store_filter=1 - collect stores only (PMSFCR.ST)
+ ts_enable=1 - enable timestamping with value of generic timer (PMSCR.TS)
+
++++*+++ Latency is the total latency from the point at which sampling started on that instruction, rather
+than only the execution latency.
+
+Only some events can be filtered on; these include:
+
+ bit 1 - instruction retired (i.e. omit speculative instructions)
+ bit 3 - L1D refill
+ bit 5 - TLB refill
+ bit 7 - mispredict
+ bit 11 - misaligned access
+
+So to sample just retired instructions:
+
+ perf record -e arm_spe/event_filter=2/ -- ./mybench
+
+or just mispredicted branches:
+
+ perf record -e arm_spe/event_filter=0x80/ -- ./mybench
+
+Viewing the data
+~~~~~~~~~~~~~~~~~
+
+By default perf report and perf script will assign samples to separate groups depending on the
+attributes/events of the SPE record. Because instructions can have multiple events associated with
+them, the samples in these groups are not necessarily unique. For example perf report shows these
+groups:
+
+ Available samples
+ 0 arm_spe//
+ 0 dummy:u
+ 21 l1d-miss
+ 897 l1d-access
+ 5 llc-miss
+ 7 llc-access
+ 2 tlb-miss
+ 1K tlb-access
+ 36 branch-miss
+ 0 remote-access
+ 900 memory
+
+The arm_spe// and dummy:u events are implementation details and are expected to be empty.
+
+To get a full list of unique samples that are not sorted into groups, set the itrace option to
+generate 'instruction' samples. The period option is also taken into account, so set it to 1
+instruction unless you want to further downsample the already sampled SPE data:
+
+ perf report --itrace=i1i
+
+Memory access details are also stored on the samples and this can be viewed with:
+
+ perf report --mem-mode
+
+Common errors
+~~~~~~~~~~~~~
+
+ - "Cannot find PMU `arm_spe'. Missing kernel support?"
+
+ Module not built or loaded, KPTI not disabled (see above), or running on a VM
+
+ - "Arm SPE CONTEXT packets not found in the traces."
+
+ Root privilege is required to collect context packets. But these only increase the accuracy of
+ assigning PIDs to kernel samples. For userspace sampling this can be ignored.
+
+ - Excessively large perf.data file size
+
+ Increase sampling interval (see above)
+
+
+SEE ALSO
+--------
+
+linkperf:perf-record[1], linkperf:perf-script[1], linkperf:perf-report[1],
+linkperf:perf-inject[1]