diff options
Diffstat (limited to '')
-rw-r--r-- | tools/testing/selftests/timers/valid-adjtimex.c | 330 |
1 files changed, 330 insertions, 0 deletions
diff --git a/tools/testing/selftests/timers/valid-adjtimex.c b/tools/testing/selftests/timers/valid-adjtimex.c new file mode 100644 index 000000000..48b9a8032 --- /dev/null +++ b/tools/testing/selftests/timers/valid-adjtimex.c @@ -0,0 +1,330 @@ +/* valid adjtimex test + * by: John Stultz <john.stultz@linaro.org> + * (C) Copyright Linaro 2015 + * Licensed under the GPLv2 + * + * This test validates adjtimex interface with valid + * and invalid test data. + * + * Usage: valid-adjtimex + * + * To build: + * $ gcc valid-adjtimex.c -o valid-adjtimex -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + + +#include <stdio.h> +#include <stdlib.h> +#include <time.h> +#include <sys/time.h> +#include <sys/timex.h> +#include <string.h> +#include <signal.h> +#include <unistd.h> +#include "../kselftest.h" + +#define NSEC_PER_SEC 1000000000LL +#define USEC_PER_SEC 1000000LL + +#define ADJ_SETOFFSET 0x0100 + +#include <sys/syscall.h> +int clock_adjtime(clockid_t id, struct timex *tx) +{ + return syscall(__NR_clock_adjtime, id, tx); +} + + +/* clear NTP time_status & time_state */ +int clear_time_state(void) +{ + struct timex tx; + int ret; + + tx.modes = ADJ_STATUS; + tx.status = 0; + ret = adjtimex(&tx); + return ret; +} + +#define NUM_FREQ_VALID 32 +#define NUM_FREQ_OUTOFRANGE 4 +#define NUM_FREQ_INVALID 2 + +long valid_freq[NUM_FREQ_VALID] = { + -499<<16, + -450<<16, + -400<<16, + -350<<16, + -300<<16, + -250<<16, + -200<<16, + -150<<16, + -100<<16, + -75<<16, + -50<<16, + -25<<16, + -10<<16, + -5<<16, + -1<<16, + -1000, + 1<<16, + 5<<16, + 10<<16, + 25<<16, + 50<<16, + 75<<16, + 100<<16, + 150<<16, + 200<<16, + 250<<16, + 300<<16, + 350<<16, + 400<<16, + 450<<16, + 499<<16, +}; + +long outofrange_freq[NUM_FREQ_OUTOFRANGE] = { + -1000<<16, + -550<<16, + 550<<16, + 1000<<16, +}; + +#define LONG_MAX (~0UL>>1) +#define LONG_MIN (-LONG_MAX - 1) + +long invalid_freq[NUM_FREQ_INVALID] = { + LONG_MAX, + LONG_MIN, +}; + +int validate_freq(void) +{ + struct timex tx; + int ret, pass = 0; + int i; + + clear_time_state(); + + memset(&tx, 0, sizeof(struct timex)); + /* Set the leap second insert flag */ + + printf("Testing ADJ_FREQ... "); + fflush(stdout); + for (i = 0; i < NUM_FREQ_VALID; i++) { + tx.modes = ADJ_FREQUENCY; + tx.freq = valid_freq[i]; + + ret = adjtimex(&tx); + if (ret < 0) { + printf("[FAIL]\n"); + printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n", + valid_freq[i], valid_freq[i]>>16); + pass = -1; + goto out; + } + tx.modes = 0; + ret = adjtimex(&tx); + if (tx.freq != valid_freq[i]) { + printf("Warning: freq value %ld not what we set it (%ld)!\n", + tx.freq, valid_freq[i]); + } + } + for (i = 0; i < NUM_FREQ_OUTOFRANGE; i++) { + tx.modes = ADJ_FREQUENCY; + tx.freq = outofrange_freq[i]; + + ret = adjtimex(&tx); + if (ret < 0) { + printf("[FAIL]\n"); + printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n", + outofrange_freq[i], outofrange_freq[i]>>16); + pass = -1; + goto out; + } + tx.modes = 0; + ret = adjtimex(&tx); + if (tx.freq == outofrange_freq[i]) { + printf("[FAIL]\n"); + printf("ERROR: out of range value %ld actually set!\n", + tx.freq); + pass = -1; + goto out; + } + } + + + if (sizeof(long) == 8) { /* this case only applies to 64bit systems */ + for (i = 0; i < NUM_FREQ_INVALID; i++) { + tx.modes = ADJ_FREQUENCY; + tx.freq = invalid_freq[i]; + ret = adjtimex(&tx); + if (ret >= 0) { + printf("[FAIL]\n"); + printf("Error: No failure on invalid ADJ_FREQUENCY %ld\n", + invalid_freq[i]); + pass = -1; + goto out; + } + } + } + + printf("[OK]\n"); +out: + /* reset freq to zero */ + tx.modes = ADJ_FREQUENCY; + tx.freq = 0; + ret = adjtimex(&tx); + + return pass; +} + + +int set_offset(long long offset, int use_nano) +{ + struct timex tmx = {}; + int ret; + + tmx.modes = ADJ_SETOFFSET; + if (use_nano) { + tmx.modes |= ADJ_NANO; + + tmx.time.tv_sec = offset / NSEC_PER_SEC; + tmx.time.tv_usec = offset % NSEC_PER_SEC; + + if (offset < 0 && tmx.time.tv_usec) { + tmx.time.tv_sec -= 1; + tmx.time.tv_usec += NSEC_PER_SEC; + } + } else { + tmx.time.tv_sec = offset / USEC_PER_SEC; + tmx.time.tv_usec = offset % USEC_PER_SEC; + + if (offset < 0 && tmx.time.tv_usec) { + tmx.time.tv_sec -= 1; + tmx.time.tv_usec += USEC_PER_SEC; + } + } + + ret = clock_adjtime(CLOCK_REALTIME, &tmx); + if (ret < 0) { + printf("(sec: %ld usec: %ld) ", tmx.time.tv_sec, tmx.time.tv_usec); + printf("[FAIL]\n"); + return -1; + } + return 0; +} + +int set_bad_offset(long sec, long usec, int use_nano) +{ + struct timex tmx = {}; + int ret; + + tmx.modes = ADJ_SETOFFSET; + if (use_nano) + tmx.modes |= ADJ_NANO; + + tmx.time.tv_sec = sec; + tmx.time.tv_usec = usec; + ret = clock_adjtime(CLOCK_REALTIME, &tmx); + if (ret >= 0) { + printf("Invalid (sec: %ld usec: %ld) did not fail! ", tmx.time.tv_sec, tmx.time.tv_usec); + printf("[FAIL]\n"); + return -1; + } + return 0; +} + +int validate_set_offset(void) +{ + printf("Testing ADJ_SETOFFSET... "); + fflush(stdout); + + /* Test valid values */ + if (set_offset(NSEC_PER_SEC - 1, 1)) + return -1; + + if (set_offset(-NSEC_PER_SEC + 1, 1)) + return -1; + + if (set_offset(-NSEC_PER_SEC - 1, 1)) + return -1; + + if (set_offset(5 * NSEC_PER_SEC, 1)) + return -1; + + if (set_offset(-5 * NSEC_PER_SEC, 1)) + return -1; + + if (set_offset(5 * NSEC_PER_SEC + NSEC_PER_SEC / 2, 1)) + return -1; + + if (set_offset(-5 * NSEC_PER_SEC - NSEC_PER_SEC / 2, 1)) + return -1; + + if (set_offset(USEC_PER_SEC - 1, 0)) + return -1; + + if (set_offset(-USEC_PER_SEC + 1, 0)) + return -1; + + if (set_offset(-USEC_PER_SEC - 1, 0)) + return -1; + + if (set_offset(5 * USEC_PER_SEC, 0)) + return -1; + + if (set_offset(-5 * USEC_PER_SEC, 0)) + return -1; + + if (set_offset(5 * USEC_PER_SEC + USEC_PER_SEC / 2, 0)) + return -1; + + if (set_offset(-5 * USEC_PER_SEC - USEC_PER_SEC / 2, 0)) + return -1; + + /* Test invalid values */ + if (set_bad_offset(0, -1, 1)) + return -1; + if (set_bad_offset(0, -1, 0)) + return -1; + if (set_bad_offset(0, 2 * NSEC_PER_SEC, 1)) + return -1; + if (set_bad_offset(0, 2 * USEC_PER_SEC, 0)) + return -1; + if (set_bad_offset(0, NSEC_PER_SEC, 1)) + return -1; + if (set_bad_offset(0, USEC_PER_SEC, 0)) + return -1; + if (set_bad_offset(0, -NSEC_PER_SEC, 1)) + return -1; + if (set_bad_offset(0, -USEC_PER_SEC, 0)) + return -1; + + printf("[OK]\n"); + return 0; +} + +int main(int argc, char **argv) +{ + if (validate_freq()) + return ksft_exit_fail(); + + if (validate_set_offset()) + return ksft_exit_fail(); + + return ksft_exit_pass(); +} |