From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sun, 7 Apr 2024 20:49:45 +0200
Subject: Adding upstream version 6.1.76.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 Documentation/admin-guide/module-signing.rst | 285 +++++++++++++++++++++++++++
 1 file changed, 285 insertions(+)
 create mode 100644 Documentation/admin-guide/module-signing.rst

(limited to 'Documentation/admin-guide/module-signing.rst')

diff --git a/Documentation/admin-guide/module-signing.rst b/Documentation/admin-guide/module-signing.rst
new file mode 100644
index 000000000..7d7c7c8a5
--- /dev/null
+++ b/Documentation/admin-guide/module-signing.rst
@@ -0,0 +1,285 @@
+Kernel module signing facility
+------------------------------
+
+.. CONTENTS
+..
+.. - Overview.
+.. - Configuring module signing.
+.. - Generating signing keys.
+.. - Public keys in the kernel.
+.. - Manually signing modules.
+.. - Signed modules and stripping.
+.. - Loading signed modules.
+.. - Non-valid signatures and unsigned modules.
+.. - Administering/protecting the private key.
+
+
+========
+Overview
+========
+
+The kernel module signing facility cryptographically signs modules during
+installation and then checks the signature upon loading the module.  This
+allows increased kernel security by disallowing the loading of unsigned modules
+or modules signed with an invalid key.  Module signing increases security by
+making it harder to load a malicious module into the kernel.  The module
+signature checking is done by the kernel so that it is not necessary to have
+trusted userspace bits.
+
+This facility uses X.509 ITU-T standard certificates to encode the public keys
+involved.  The signatures are not themselves encoded in any industrial standard
+type.  The facility currently only supports the RSA public key encryption
+standard (though it is pluggable and permits others to be used).  The possible
+hash algorithms that can be used are SHA-1, SHA-224, SHA-256, SHA-384, and
+SHA-512 (the algorithm is selected by data in the signature).
+
+
+==========================
+Configuring module signing
+==========================
+
+The module signing facility is enabled by going to the
+:menuselection:`Enable Loadable Module Support` section of
+the kernel configuration and turning on::
+
+	CONFIG_MODULE_SIG	"Module signature verification"
+
+This has a number of options available:
+
+ (1) :menuselection:`Require modules to be validly signed`
+     (``CONFIG_MODULE_SIG_FORCE``)
+
+     This specifies how the kernel should deal with a module that has a
+     signature for which the key is not known or a module that is unsigned.
+
+     If this is off (ie. "permissive"), then modules for which the key is not
+     available and modules that are unsigned are permitted, but the kernel will
+     be marked as being tainted, and the concerned modules will be marked as
+     tainted, shown with the character 'E'.
+
+     If this is on (ie. "restrictive"), only modules that have a valid
+     signature that can be verified by a public key in the kernel's possession
+     will be loaded.  All other modules will generate an error.
+
+     Irrespective of the setting here, if the module has a signature block that
+     cannot be parsed, it will be rejected out of hand.
+
+
+ (2) :menuselection:`Automatically sign all modules`
+     (``CONFIG_MODULE_SIG_ALL``)
+
+     If this is on then modules will be automatically signed during the
+     modules_install phase of a build.  If this is off, then the modules must
+     be signed manually using::
+
+	scripts/sign-file
+
+
+ (3) :menuselection:`Which hash algorithm should modules be signed with?`
+
+     This presents a choice of which hash algorithm the installation phase will
+     sign the modules with:
+
+        =============================== ==========================================
+	``CONFIG_MODULE_SIG_SHA1``	:menuselection:`Sign modules with SHA-1`
+	``CONFIG_MODULE_SIG_SHA224``	:menuselection:`Sign modules with SHA-224`
+	``CONFIG_MODULE_SIG_SHA256``	:menuselection:`Sign modules with SHA-256`
+	``CONFIG_MODULE_SIG_SHA384``	:menuselection:`Sign modules with SHA-384`
+	``CONFIG_MODULE_SIG_SHA512``	:menuselection:`Sign modules with SHA-512`
+        =============================== ==========================================
+
+     The algorithm selected here will also be built into the kernel (rather
+     than being a module) so that modules signed with that algorithm can have
+     their signatures checked without causing a dependency loop.
+
+
+ (4) :menuselection:`File name or PKCS#11 URI of module signing key`
+     (``CONFIG_MODULE_SIG_KEY``)
+
+     Setting this option to something other than its default of
+     ``certs/signing_key.pem`` will disable the autogeneration of signing keys
+     and allow the kernel modules to be signed with a key of your choosing.
+     The string provided should identify a file containing both a private key
+     and its corresponding X.509 certificate in PEM form, or — on systems where
+     the OpenSSL ENGINE_pkcs11 is functional — a PKCS#11 URI as defined by
+     RFC7512. In the latter case, the PKCS#11 URI should reference both a
+     certificate and a private key.
+
+     If the PEM file containing the private key is encrypted, or if the
+     PKCS#11 token requires a PIN, this can be provided at build time by
+     means of the ``KBUILD_SIGN_PIN`` variable.
+
+
+ (5) :menuselection:`Additional X.509 keys for default system keyring`
+     (``CONFIG_SYSTEM_TRUSTED_KEYS``)
+
+     This option can be set to the filename of a PEM-encoded file containing
+     additional certificates which will be included in the system keyring by
+     default.
+
+Note that enabling module signing adds a dependency on the OpenSSL devel
+packages to the kernel build processes for the tool that does the signing.
+
+
+=======================
+Generating signing keys
+=======================
+
+Cryptographic keypairs are required to generate and check signatures.  A
+private key is used to generate a signature and the corresponding public key is
+used to check it.  The private key is only needed during the build, after which
+it can be deleted or stored securely.  The public key gets built into the
+kernel so that it can be used to check the signatures as the modules are
+loaded.
+
+Under normal conditions, when ``CONFIG_MODULE_SIG_KEY`` is unchanged from its
+default, the kernel build will automatically generate a new keypair using
+openssl if one does not exist in the file::
+
+	certs/signing_key.pem
+
+during the building of vmlinux (the public part of the key needs to be built
+into vmlinux) using parameters in the::
+
+	certs/x509.genkey
+
+file (which is also generated if it does not already exist).
+
+It is strongly recommended that you provide your own x509.genkey file.
+
+Most notably, in the x509.genkey file, the req_distinguished_name section
+should be altered from the default::
+
+	[ req_distinguished_name ]
+	#O = Unspecified company
+	CN = Build time autogenerated kernel key
+	#emailAddress = unspecified.user@unspecified.company
+
+The generated RSA key size can also be set with::
+
+	[ req ]
+	default_bits = 4096
+
+
+It is also possible to manually generate the key private/public files using the
+x509.genkey key generation configuration file in the root node of the Linux
+kernel sources tree and the openssl command.  The following is an example to
+generate the public/private key files::
+
+	openssl req -new -nodes -utf8 -sha256 -days 36500 -batch -x509 \
+	   -config x509.genkey -outform PEM -out kernel_key.pem \
+	   -keyout kernel_key.pem
+
+The full pathname for the resulting kernel_key.pem file can then be specified
+in the ``CONFIG_MODULE_SIG_KEY`` option, and the certificate and key therein will
+be used instead of an autogenerated keypair.
+
+
+=========================
+Public keys in the kernel
+=========================
+
+The kernel contains a ring of public keys that can be viewed by root.  They're
+in a keyring called ".builtin_trusted_keys" that can be seen by::
+
+	[root@deneb ~]# cat /proc/keys
+	...
+	223c7853 I------     1 perm 1f030000     0     0 keyring   .builtin_trusted_keys: 1
+	302d2d52 I------     1 perm 1f010000     0     0 asymmetri Fedora kernel signing key: d69a84e6bce3d216b979e9505b3e3ef9a7118079: X509.RSA a7118079 []
+	...
+
+Beyond the public key generated specifically for module signing, additional
+trusted certificates can be provided in a PEM-encoded file referenced by the
+``CONFIG_SYSTEM_TRUSTED_KEYS`` configuration option.
+
+Further, the architecture code may take public keys from a hardware store and
+add those in also (e.g. from the UEFI key database).
+
+Finally, it is possible to add additional public keys by doing::
+
+	keyctl padd asymmetric "" [.builtin_trusted_keys-ID] <[key-file]
+
+e.g.::
+
+	keyctl padd asymmetric "" 0x223c7853 <my_public_key.x509
+
+Note, however, that the kernel will only permit keys to be added to
+``.builtin_trusted_keys`` **if** the new key's X.509 wrapper is validly signed by a key
+that is already resident in the ``.builtin_trusted_keys`` at the time the key was added.
+
+
+========================
+Manually signing modules
+========================
+
+To manually sign a module, use the scripts/sign-file tool available in
+the Linux kernel source tree.  The script requires 4 arguments:
+
+	1.  The hash algorithm (e.g., sha256)
+	2.  The private key filename or PKCS#11 URI
+	3.  The public key filename
+	4.  The kernel module to be signed
+
+The following is an example to sign a kernel module::
+
+	scripts/sign-file sha512 kernel-signkey.priv \
+		kernel-signkey.x509 module.ko
+
+The hash algorithm used does not have to match the one configured, but if it
+doesn't, you should make sure that hash algorithm is either built into the
+kernel or can be loaded without requiring itself.
+
+If the private key requires a passphrase or PIN, it can be provided in the
+$KBUILD_SIGN_PIN environment variable.
+
+
+============================
+Signed modules and stripping
+============================
+
+A signed module has a digital signature simply appended at the end.  The string
+``~Module signature appended~.`` at the end of the module's file confirms that a
+signature is present but it does not confirm that the signature is valid!
+
+Signed modules are BRITTLE as the signature is outside of the defined ELF
+container.  Thus they MAY NOT be stripped once the signature is computed and
+attached.  Note the entire module is the signed payload, including any and all
+debug information present at the time of signing.
+
+
+======================
+Loading signed modules
+======================
+
+Modules are loaded with insmod, modprobe, ``init_module()`` or
+``finit_module()``, exactly as for unsigned modules as no processing is
+done in userspace.  The signature checking is all done within the kernel.
+
+
+=========================================
+Non-valid signatures and unsigned modules
+=========================================
+
+If ``CONFIG_MODULE_SIG_FORCE`` is enabled or module.sig_enforce=1 is supplied on
+the kernel command line, the kernel will only load validly signed modules
+for which it has a public key.   Otherwise, it will also load modules that are
+unsigned.   Any module for which the kernel has a key, but which proves to have
+a signature mismatch will not be permitted to load.
+
+Any module that has an unparseable signature will be rejected.
+
+
+=========================================
+Administering/protecting the private key
+=========================================
+
+Since the private key is used to sign modules, viruses and malware could use
+the private key to sign modules and compromise the operating system.  The
+private key must be either destroyed or moved to a secure location and not kept
+in the root node of the kernel source tree.
+
+If you use the same private key to sign modules for multiple kernel
+configurations, you must ensure that the module version information is
+sufficient to prevent loading a module into a different kernel.  Either
+set ``CONFIG_MODVERSIONS=y`` or ensure that each configuration has a different
+kernel release string by changing ``EXTRAVERSION`` or ``CONFIG_LOCALVERSION``.
-- 
cgit v1.2.3