From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../bindings/display/bridge/adi,adv7511.yaml | 237 ++++++++++++++++++ .../bindings/display/bridge/adi,adv7533.yaml | 182 ++++++++++++++ .../bindings/display/bridge/analogix,anx7625.yaml | 188 ++++++++++++++ .../bindings/display/bridge/analogix,anx7814.yaml | 108 ++++++++ .../bindings/display/bridge/analogix_dp.txt | 51 ++++ .../bindings/display/bridge/anx6345.yaml | 94 +++++++ .../bindings/display/bridge/cdns,dsi.txt | 112 +++++++++ .../bindings/display/bridge/cdns,mhdp8546.yaml | 164 ++++++++++++ .../bindings/display/bridge/chipone,icn6211.yaml | 123 +++++++++ .../bindings/display/bridge/chrontel,ch7033.yaml | 77 ++++++ .../bindings/display/bridge/fsl,imx8qxp-ldb.yaml | 173 +++++++++++++ .../display/bridge/fsl,imx8qxp-pixel-combiner.yaml | 144 +++++++++++ .../display/bridge/fsl,imx8qxp-pixel-link.yaml | 144 +++++++++++ .../display/bridge/fsl,imx8qxp-pxl2dpi.yaml | 108 ++++++++ .../bindings/display/bridge/fsl,ldb.yaml | 105 ++++++++ .../display/bridge/google,cros-ec-anx7688.yaml | 80 ++++++ .../display/bridge/ingenic,jz4780-hdmi.yaml | 81 ++++++ .../bindings/display/bridge/intel,keembay-dsi.yaml | 93 +++++++ .../bindings/display/bridge/ite,it6505.yaml | 94 +++++++ .../bindings/display/bridge/ite,it66121.yaml | 127 ++++++++++ .../bindings/display/bridge/lontium,lt8912b.yaml | 103 ++++++++ .../bindings/display/bridge/lontium,lt9211.yaml | 117 +++++++++ .../bindings/display/bridge/lontium,lt9611.yaml | 121 +++++++++ .../bindings/display/bridge/lvds-codec.yaml | 186 ++++++++++++++ .../bridge/megachips-stdpxxxx-ge-b850v3-fw.txt | 91 +++++++ .../bindings/display/bridge/nwl-dsi.yaml | 202 +++++++++++++++ .../bindings/display/bridge/nxp,ptn3460.yaml | 106 ++++++++ .../bindings/display/bridge/nxp,tda998x.yaml | 109 ++++++++ .../devicetree/bindings/display/bridge/ps8622.txt | 31 +++ .../devicetree/bindings/display/bridge/ps8640.yaml | 121 +++++++++ .../display/bridge/renesas,dsi-csi2-tx.yaml | 118 +++++++++ .../bindings/display/bridge/renesas,dw-hdmi.yaml | 130 ++++++++++ .../bindings/display/bridge/renesas,lvds.yaml | 235 +++++++++++++++++ .../bindings/display/bridge/sil,sii9022.yaml | 131 ++++++++++ .../bindings/display/bridge/sil,sii9234.yaml | 110 ++++++++ .../bindings/display/bridge/sil-sii8620.txt | 33 +++ .../bindings/display/bridge/simple-bridge.yaml | 91 +++++++ .../bindings/display/bridge/snps,dw-mipi-dsi.yaml | 71 ++++++ .../bindings/display/bridge/synopsys,dw-hdmi.yaml | 53 ++++ .../display/bridge/thine,thc63lvd1024.yaml | 115 +++++++++ .../bindings/display/bridge/ti,dlpc3433.yaml | 117 +++++++++ .../bindings/display/bridge/ti,sn65dsi83.yaml | 162 ++++++++++++ .../bindings/display/bridge/ti,sn65dsi86.yaml | 277 +++++++++++++++++++++ .../bindings/display/bridge/ti,tfp410.yaml | 119 +++++++++ .../bindings/display/bridge/toshiba,tc358762.yaml | 84 +++++++ .../bindings/display/bridge/toshiba,tc358764.txt | 35 +++ .../bindings/display/bridge/toshiba,tc358767.yaml | 174 +++++++++++++ .../bindings/display/bridge/toshiba,tc358768.yaml | 127 ++++++++++ .../bindings/display/bridge/toshiba,tc358775.yaml | 206 +++++++++++++++ 49 files changed, 6060 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/analogix_dp.txt create mode 100644 Documentation/devicetree/bindings/display/bridge/anx6345.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt create mode 100644 Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/ps8622.txt create mode 100644 Documentation/devicetree/bindings/display/bridge/ps8640.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt create mode 100644 Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml (limited to 'Documentation/devicetree/bindings/display/bridge') diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml new file mode 100644 index 000000000..5bbe81862 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml @@ -0,0 +1,237 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADV7511/11W/13 HDMI Encoders + +maintainers: + - Laurent Pinchart + +description: | + The ADV7511, ADV7511W and ADV7513 are HDMI audio and video + transmitters compatible with HDMI 1.4 and DVI 1.0. They support color + space conversion, S/PDIF, CEC and HDCP. The transmitter input is + parallel RGB or YUV data. + +properties: + compatible: + enum: + - adi,adv7511 + - adi,adv7511w + - adi,adv7513 + + reg: + description: | + I2C slave addresses. + + The ADV7511/11W/13 internal registers are split into four pages + exposed through different I2C addresses, creating four register + maps. Each map has it own I2C address and acts as a standard slave + device on the I2C bus. The main address is mandatory, others are + optional and revert to defaults if not specified. + minItems: 1 + maxItems: 4 + + reg-names: + description: + Names of maps with programmable addresses. It can contain any map + needing a non-default address. + minItems: 1 + items: + - const: main + - const: edid + - const: cec + - const: packet + + clocks: + description: Reference to the CEC clock. + maxItems: 1 + + clock-names: + const: cec + + interrupts: + maxItems: 1 + + pd-gpios: + description: GPIO connected to the power down signal. + maxItems: 1 + + avdd-supply: + description: A 1.8V supply that powers up the AVDD pin. + + dvdd-supply: + description: A 1.8V supply that powers up the DVDD pin. + + pvdd-supply: + description: A 1.8V supply that powers up the PVDD pin. + + dvdd-3v-supply: + description: A 3.3V supply that powers up the DVDD_3V pin. + + bgvdd-supply: + description: A 1.8V supply that powers up the BGVDD pin. + + adi,input-depth: + description: Number of bits per color component at the input. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 8, 10, 12 ] + + adi,input-colorspace: + description: Input color space. + enum: [ rgb, yuv422, yuv444 ] + + adi,input-clock: + description: | + Input clock type. + "1x": one clock cycle per pixel + "2x": two clock cycles per pixel + "dd": one clock cycle per pixel, data driven on both edges + enum: [ 1x, 2x, dd ] + + adi,clock-delay: + description: + Video data clock delay relative to the pixel clock, in ps + (-1200ps .. 1600 ps). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + adi,embedded-sync: + description: + If defined, the input uses synchronization signals embedded in the + data stream (similar to BT.656). + type: boolean + + adi,input-style: + description: + Input components arrangement variant as listed in the input + format tables in the datasheet. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 3 ] + + adi,input-justification: + description: Input bit justification. + enum: [ left, evenly, right ] + + ports: + description: + The ADV7511(W)/13 has two video ports and one audio port. + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + description: Video port for the RGB or YUV input. + $ref: /schemas/graph.yaml#/properties/port + + port@1: + description: Video port for the HDMI output. + $ref: /schemas/graph.yaml#/properties/port + + port@2: + description: Audio port for the HDMI output. + $ref: /schemas/graph.yaml#/properties/port + +# adi,input-colorspace and adi,input-clock are required except in +# "rgb 1x" and "yuv444 1x" modes, in which case they must not be +# specified. +if: + not: + properties: + adi,input-colorspace: + contains: + enum: [ rgb, yuv444 ] + adi,input-clock: + contains: + const: 1x + +then: + required: + - adi,input-style + - adi,input-justification + +else: + properties: + adi,input-style: false + adi,input-justification: false + + +required: + - compatible + - reg + - ports + - adi,input-depth + - adi,input-colorspace + - adi,input-clock + - avdd-supply + - dvdd-supply + - pvdd-supply + - dvdd-3v-supply + - bgvdd-supply + +additionalProperties: false + +examples: + - | + #include + + i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe6500000>; + + adv7511w: hdmi@39 { + compatible = "adi,adv7511w"; + /* + * The EDID page will be accessible on address 0x66 on the I2C + * bus. All other maps continue to use their default addresses. + */ + reg = <0x39>, <0x66>; + reg-names = "main", "edid"; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + clocks = <&cec_clock>; + clock-names = "cec"; + avdd-supply = <&v1v8>; + dvdd-supply = <&v1v8>; + pvdd-supply = <&v1v8>; + dvdd-3v-supply = <&v3v3>; + bgvdd-supply = <&v1v8>; + + adi,input-depth = <8>; + adi,input-colorspace = "yuv422"; + adi,input-clock = "1x"; + + adi,input-style = <3>; + adi,input-justification = "right"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511w_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + + port@2 { + reg = <2>; + codec_endpoint: endpoint { + remote-endpoint = <&i2s0_cpu_endpoint>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml new file mode 100644 index 000000000..987aa83c2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/adi,adv7533.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADV7533/35 HDMI Encoders + +maintainers: + - Laurent Pinchart + +description: | + The ADV7533 and ADV7535 are HDMI audio and video transmitters + compatible with HDMI 1.4 and DVI 1.0. They support color space + conversion, S/PDIF, CEC and HDCP. The transmitter input is MIPI DSI. + +properties: + compatible: + enum: + - adi,adv7533 + - adi,adv7535 + + reg: + description: | + I2C slave addresses. + + The ADV7533/35 internal registers are split into four pages + exposed through different I2C addresses, creating four register + maps. Each map has it own I2C address and acts as a standard slave + device on the I2C bus. The main address is mandatory, others are + optional and revert to defaults if not specified. + minItems: 1 + maxItems: 4 + + reg-names: + description: + Names of maps with programmable addresses. It can contain any map + needing a non-default address. + minItems: 1 + items: + - const: main + - const: edid + - const: cec + - const: packet + + clocks: + description: Reference to the CEC clock. + maxItems: 1 + + clock-names: + const: cec + + interrupts: + maxItems: 1 + + pd-gpios: + description: GPIO connected to the power down signal. + maxItems: 1 + + avdd-supply: + description: A 1.8V supply that powers up the AVDD pin. + + dvdd-supply: + description: A 1.8V supply that powers up the DVDD pin. + + pvdd-supply: + description: A 1.8V supply that powers up the PVDD pin. + + a2vdd-supply: + description: A 1.8V supply that powers up the A2VDD pin. + + v3p3-supply: + description: A 3.3V supply that powers up the V3P3 pin. + + v1p2-supply: + description: + A supply that powers up the V1P2 pin. It can be either 1.2V + or 1.8V for ADV7533 but only 1.8V for ADV7535. + + adi,disable-timing-generator: + description: + Disables the internal timing generator. The chip will rely on the + sync signals in the DSI data lanes, rather than generating its own + timings for HDMI output. + type: boolean + + adi,dsi-lanes: + description: Number of DSI data lanes connected to the DSI host. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 3, 4 ] + + ports: + description: + The ADV7533/35 has two video ports and one audio port. + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + description: + Video port for the DSI input. The remote endpoint phandle + should be a reference to a valid mipi_dsi_host_device. + $ref: /schemas/graph.yaml#/properties/port + + port@1: + description: Video port for the HDMI output. + $ref: /schemas/graph.yaml#/properties/port + + port@2: + description: Audio port for the HDMI output. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - ports + - adi,dsi-lanes + - avdd-supply + - dvdd-supply + - pvdd-supply + - a2vdd-supply + - v3p3-supply + +additionalProperties: false + +examples: + - | + #include + + i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe6500000>; + + adv7533: hdmi@39 { + compatible = "adi,adv7533"; + /* + * The EDID page will be accessible on address 0x66 on the I2C + * bus. All other maps continue to use their default addresses. + */ + reg = <0x39>, <0x66>; + reg-names = "main", "edid"; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + clocks = <&cec_clock>; + clock-names = "cec"; + adi,dsi-lanes = <4>; + avdd-supply = <&v1v8>; + dvdd-supply = <&v1v8>; + pvdd-supply = <&v1v8>; + a2vdd-supply = <&v1v8>; + v3p3-supply = <&v3v3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7533_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + adv7533_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + + port@2 { + reg = <2>; + codec_endpoint: endpoint { + remote-endpoint = <&i2s0_cpu_endpoint>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml new file mode 100644 index 000000000..4590186c4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Analogix Semiconductor, Inc. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter) + +maintainers: + - Xin Ji + +description: | + The ANX7625 is an ultra-low power 4K Mobile HD Transmitter + designed for portable devices. + +properties: + compatible: + items: + - const: analogix,anx7625 + + reg: + maxItems: 1 + + interrupts: + description: used for interrupt pin B8. + maxItems: 1 + + enable-gpios: + description: used for power on chip control, POWER_EN pin D2. + maxItems: 1 + + reset-gpios: + description: used for reset chip control, RESET_N pin B7. + maxItems: 1 + + vdd10-supply: + description: Regulator that provides the supply 1.0V power. + + vdd18-supply: + description: Regulator that provides the supply 1.8V power. + + vdd33-supply: + description: Regulator that provides the supply 3.3V power. + + analogix,lane0-swing: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 1 + maxItems: 20 + description: + an array of swing register setting for DP tx lane0 PHY. + Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0, + Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2, + Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and + [Swing control] setting. + Registers 0~9, bit 3:0 is [Boost control], these bits control + post cursor manual, increase the [Boost control] to increase + Pre-emphasis value. + Registers 0~9, bit 6:4 is [Swing control], these bits control + swing manual, increase [Swing control] setting to add Vp-p value + for each Swing, Pre. + Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0, + Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2, + Swing1_Pre2, Swing0_Pre3, they are for [R select control] and + [R Termination control] setting. + Registers 10~19, bit 4:0 is [R select control], these bits are + compensation manual, increase it can enhance IO driven strength + and Vp-p. + Registers 10~19, bit 5:6 is [R termination control], these bits + adjust 50ohm impedance of DP tx termination. 00:55 ohm, + 01:50 ohm(default), 10:45 ohm, 11:40 ohm. + + analogix,lane1-swing: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 1 + maxItems: 20 + description: + an array of swing register setting for DP tx lane1 PHY. + DP TX lane1 swing register setting same with lane0 + swing, please refer lane0-swing property description. + + analogix,audio-enable: + type: boolean + description: let the driver enable audio HDMI codec function or not. + + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + MIPI DSI/DPI input. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + bus-type: + enum: [7] + default: 1 + + data-lanes: true + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for panel or connector. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - vdd10-supply + - vdd18-supply + - vdd33-supply + - ports + +additionalProperties: false + +examples: + - | + #include + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + encoder@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&pp1000_mipibrdg>; + vdd18-supply = <&pp1800_mipibrdg>; + vdd33-supply = <&pp3300_mipibrdg>; + analogix,audio-enable; + analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>; + analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi2dp_bridge_in: port@0 { + reg = <0>; + anx7625_in: endpoint { + remote-endpoint = <&mipi_dsi>; + bus-type = <7>; + data-lanes = <0 1 2 3>; + }; + }; + + mipi2dp_bridge_out: port@1 { + reg = <1>; + anx7625_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + aux-bus { + panel { + compatible = "innolux,n125hce-gn1"; + power-supply = <&pp3300_disp_x>; + backlight = <&backlight_lcd0>; + + port { + panel_in: endpoint { + remote-endpoint = <&anx7625_out>; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml new file mode 100644 index 000000000..4a5e5d9d6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/analogix,anx7814.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX7814 SlimPort (Full-HD Transmitter) + +maintainers: + - Andrzej Hajda + - Neil Armstrong + - Robert Foss + +properties: + compatible: + enum: + - analogix,anx7808 + - analogix,anx7812 + - analogix,anx7814 + - analogix,anx7818 + + reg: + maxItems: 1 + description: I2C address of the device. + + interrupts: + maxItems: 1 + description: Should contain the INTP interrupt. + + hpd-gpios: + deprecated: true + maxItems: 1 + description: Which GPIO to use for hpd. + + pd-gpios: + maxItems: 1 + description: Which GPIO to use for power down. + + reset-gpios: + maxItems: 1 + description: Which GPIO to use for reset. + + dvdd10-supply: + description: Regulator for 1.0V digital core power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for HDMI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for SlimPort, DisplayPort, eDP or MyDP output. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + anx7814: bridge@38 { + compatible = "analogix,anx7814"; + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */ + pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + anx7814_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + + port@1 { + reg = <1>; + anx7814_out: endpoint { + remote-endpoint = <&edp_out>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt new file mode 100644 index 000000000..027d76c27 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt @@ -0,0 +1,51 @@ +Analogix Display Port bridge bindings + +Required properties for dp-controller: + -compatible: + platform specific such as: + * "samsung,exynos5-dp" + * "rockchip,rk3288-dp" + * "rockchip,rk3399-edp" + -reg: + physical base address of the controller and length + of memory mapped region. + -interrupts: + interrupt combiner values. + -clocks: + from common clock binding: handle to dp clock. + -clock-names: + from common clock binding: Shall be "dp". + -phys: + from general PHY binding: the phandle for the PHY device. + -phy-names: + from general PHY binding: Should be "dp". + +Optional properties for dp-controller: + -force-hpd: + Indicate driver need force hpd when hpd detect failed, this + is used for some eDP screen which don't have hpd signal. + -hpd-gpios: + Hotplug detect GPIO. + Indicates which GPIO should be used for hotplug detection + -port@[X]: SoC specific port nodes with endpoint definitions as defined + in Documentation/devicetree/bindings/media/video-interfaces.txt, + please refer to the SoC specific binding document: + * Documentation/devicetree/bindings/display/exynos/exynos_dp.txt + * Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt +------------------------------------------------------------------------------- + +Example: + + dp-controller { + compatible = "samsung,exynos5-dp"; + reg = <0x145b0000 0x10000>; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + clocks = <&clock 342>; + clock-names = "dp"; + + phys = <&dp_phy>; + phy-names = "dp"; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml new file mode 100644 index 000000000..1c0406c38 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/anx6345.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX6345 eDP Transmitter Device Tree Bindings + +maintainers: + - Torsten Duwe + +description: | + The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for + portable devices. + +properties: + compatible: + const: analogix,anx6345 + + reg: + maxItems: 1 + description: base I2C address of the device + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low reset + + dvdd12-supply: + description: Regulator for 1.2V digital core power. + + dvdd25-supply: + description: Regulator for 2.5V digital core power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for LVTTL input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for eDP output (panel or connector). + May be omitted if EDID works reliably. + + required: + - port@0 + +required: + - compatible + - reg + - reset-gpios + - dvdd12-supply + - dvdd25-supply + - ports + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + anx6345: anx6345@38 { + compatible = "analogix,anx6345"; + reg = <0x38>; + reset-gpios = <&pio42 1 /* GPIO_ACTIVE_LOW */>; + dvdd25-supply = <®_dldo2>; + dvdd12-supply = <®_fldo1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + anx6345_in: port@0 { + reg = <0>; + anx6345_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_anx6345>; + }; + }; + + anx6345_out: port@1 { + reg = <1>; + anx6345_out_panel: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt new file mode 100644 index 000000000..525a4bfd8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt @@ -0,0 +1,112 @@ +Cadence DSI bridge +================== + +The Cadence DSI bridge is a DPI to DSI bridge supporting up to 4 DSI lanes. + +Required properties: +- compatible: should be set to "cdns,dsi". +- reg: physical base address and length of the controller's registers. +- interrupts: interrupt line connected to the DSI bridge. +- clocks: DSI bridge clocks. +- clock-names: must contain "dsi_p_clk" and "dsi_sys_clk". +- phys: phandle link to the MIPI D-PHY controller. +- phy-names: must contain "dphy". +- #address-cells: must be set to 1. +- #size-cells: must be set to 0. + +Optional properties: +- resets: DSI reset lines. +- reset-names: can contain "dsi_p_rst". + +Required subnodes: +- ports: Ports as described in Documentation/devicetree/bindings/graph.txt. + 2 ports are available: + * port 0: this port is only needed if some of your DSI devices are + controlled through an external bus like I2C or SPI. Can have at + most 4 endpoints. The endpoint number is directly encoding the + DSI virtual channel used by this device. + * port 1: represents the DPI input. + Other ports will be added later to support the new kind of inputs. + +- one subnode per DSI device connected on the DSI bus. Each DSI device should + contain a reg property encoding its virtual channel. + +Example: + dsi0: dsi@fd0c0000 { + compatible = "cdns,dsi"; + reg = <0x0 0xfd0c0000 0x0 0x1000>; + clocks = <&pclk>, <&sysclk>; + clock-names = "dsi_p_clk", "dsi_sys_clk"; + interrupts = <1>; + phys = <&dphy0>; + phy-names = "dphy"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + dsi0_dpi_input: endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + }; + + panel: dsi-dev@0 { + compatible = ""; + reg = <0>; + }; + }; + +or + + dsi0: dsi@fd0c0000 { + compatible = "cdns,dsi"; + reg = <0x0 0xfd0c0000 0x0 0x1000>; + clocks = <&pclk>, <&sysclk>; + clock-names = "dsi_p_clk", "dsi_sys_clk"; + interrupts = <1>; + phys = <&dphy1>; + phy-names = "dphy"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + dsi0_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_panel_input>; + }; + }; + + port@1 { + reg = <1>; + dsi0_dpi_input: endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + }; + }; + + i2c@xxx { + panel: panel@59 { + compatible = ""; + reg = <0x59>; + + port { + dsi_panel_input: endpoint { + remote-endpoint = <&dsi0_output>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml new file mode 100644 index 000000000..b2e8bc6da --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence MHDP8546 bridge + +maintainers: + - Swapnil Jakhade + - Yuti Amonkar + +properties: + compatible: + enum: + - cdns,mhdp8546 + - ti,j721e-mhdp8546 + + reg: + minItems: 1 + items: + - description: + Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P). + The AUX and PMA registers are not part of this range, they are instead + included in the associated PHY. + - description: + Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs. + - description: + Register block of mhdptx sapb registers. + + reg-names: + minItems: 1 + items: + - const: mhdptx + - const: j721e-intg + - const: mhdptx-sapb + + clocks: + maxItems: 1 + description: + DP bridge clock, used by the IP to know how to translate a number of + clock cycles into a time (which is used to comply with DP standard timings + and delays). + + phys: + maxItems: 1 + description: + phandle to the DisplayPort PHY. + + phy-names: + items: + - const: dpphy + + power-domains: + maxItems: 1 + + interrupts: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + First input port representing the DP bridge input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Second input port representing the DP bridge input. + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Third input port representing the DP bridge input. + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Fourth input port representing the DP bridge input. + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port representing the DP bridge output. + + required: + - port@0 + - port@4 + +allOf: + - if: + properties: + compatible: + contains: + const: ti,j721e-mhdp8546 + then: + properties: + reg: + minItems: 2 + maxItems: 3 + reg-names: + minItems: 2 + maxItems: 3 + else: + properties: + reg: + minItems: 1 + maxItems: 2 + reg-names: + minItems: 1 + maxItems: 2 + +required: + - compatible + - clocks + - reg + - reg-names + - phys + - phy-names + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include + bus { + #address-cells = <2>; + #size-cells = <2>; + + mhdp: dp-bridge@f0fb000000 { + compatible = "cdns,mhdp8546"; + reg = <0xf0 0xfb000000 0x0 0x1000000>; + reg-names = "mhdptx"; + clocks = <&mhdp_clock>; + phys = <&dp_phy>; + phy-names = "dpphy"; + interrupts = ; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp_bridge_input: endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + + port@4 { + reg = <4>; + dp_bridge_output: endpoint { + remote-endpoint = <&xxx_dp_connector_input>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml new file mode 100644 index 000000000..5fb54375a --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge + +maintainers: + - Jagan Teki + +description: | + ICN6211 is MIPI-DSI to RGB Converter bridge from chipone. + + It has a flexible configuration of MIPI DSI signal input and + produce RGB565, RGB666, RGB888 output format. + +properties: + compatible: + enum: + - chipone,icn6211 + + reg: + maxItems: 1 + description: virtual channel number of a DSI peripheral + + clock-names: + const: refclk + + clocks: + maxItems: 1 + description: | + Optional external clock connected to REF_CLK input. + The clock rate must be in 10..154 MHz range. + + enable-gpios: + description: Bridge EN pin, chip is reset when EN is low. + + vdd1-supply: + description: A 1.8V/2.5V/3.3V supply that power the MIPI RX. + + vdd2-supply: + description: A 1.8V/2.5V/3.3V supply that power the PLL. + + vdd3-supply: + description: A 1.8V/2.5V/3.3V supply that power the RGB output. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Video port for MIPI DSI input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DPI output (panel or connector). + + required: + - port@1 + +required: + - compatible + - reg + - enable-gpios + - ports + +additionalProperties: false + +examples: + - | + #include + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + bridge@0 { + compatible = "chipone,icn6211"; + reg = <0>; + enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + bridge_in_dsi: endpoint { + remote-endpoint = <&dsi_out_bridge>; + }; + }; + + port@1 { + reg = <1>; + + bridge_out_panel: endpoint { + remote-endpoint = <&panel_out_bridge>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml new file mode 100644 index 000000000..bb6289c7d --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019,2020 Lubomir Rintel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/chrontel,ch7033.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chrontel CH7033 Video Encoder Device Tree Bindings + +maintainers: + - Lubomir Rintel + +properties: + compatible: + const: chrontel,ch7033 + + reg: + maxItems: 1 + description: I2C address of the device + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: | + Video port for RGB input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + DVI port, should be connected to a node compatible with the + dvi-connector binding. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + vga-dvi-encoder@76 { + compatible = "chrontel,ch7033"; + reg = <0x76>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&lcd0_rgb_out>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dvi_in>; + }; + }; + + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml new file mode 100644 index 000000000..94543006f --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qm/qxp LVDS Display Bridge + +maintainers: + - Liu Ying + +description: | + The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels. + + The i.MX8qm/qxp LDB is controlled by Control and Status Registers(CSR) module. + The CSR module, as a system controller, contains the LDB's configuration + registers. + + For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color + format and can map the input to VESA or JEIDA standards. The two channels + cannot be used simultaneously, that is to say, the user should pick one of + them to use. Two LDB channels from two LDB instances can work together in + LDB split mode to support a dual link LVDS display. The channel indexes + have to be different. Channel0 outputs odd pixels and channel1 outputs + even pixels. + + For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel + input color format. The two channels can be used simultaneously, either + in dual mode or split mode. In dual mode, the two channels output identical + data. In split mode, channel0 outputs odd pixels and channel1 outputs even + pixels. + + A side note is that i.MX8qm/qxp LDB is officially called pixel mapper in + the SoC reference manuals. The pixel mapper uses logic of LDBs embedded in + i.MX6qdl/sx SoCs, i.e., it is essentially based on them. To keep the naming + consistency, this binding calls it LDB. + +properties: + compatible: + enum: + - fsl,imx8qm-ldb + - fsl,imx8qxp-ldb + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clocks: + items: + - description: pixel clock + - description: bypass clock + + clock-names: + items: + - const: pixel + - const: bypass + + power-domains: + maxItems: 1 + + fsl,companion-ldb: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + A phandle which points to companion LDB which is used in LDB split mode. + +patternProperties: + "^channel@[0-1]$": + type: object + description: Represents a channel of LDB. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + description: The channel index. + enum: [ 0, 1 ] + + phys: + description: A phandle to the phy module representing the LVDS PHY. + maxItems: 1 + + phy-names: + const: lvds_phy + + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input port of the channel. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output port of the channel. + + required: + - "#address-cells" + - "#size-cells" + - reg + - phys + - phy-names + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - clocks + - clock-names + - power-domains + - channel@0 + - channel@1 + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8qm-ldb + then: + properties: + fsl,companion-ldb: false + +additionalProperties: false + +examples: + - | + #include + ldb { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8qxp-ldb"; + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>, + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>; + clock-names = "pixel", "bypass"; + power-domains = <&pd IMX_SC_R_LVDS_0>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + phys = <&mipi_lvds_0_phy>; + phy-names = "lvds_phy"; + + port@0 { + reg = <0>; + + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint { + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>; + }; + }; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + phys = <&mipi_lvds_0_phy>; + phy-names = "lvds_phy"; + + port@0 { + reg = <0>; + + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint { + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml new file mode 100644 index 000000000..50bae2122 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-combiner.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qm/qxp Pixel Combiner + +maintainers: + - Liu Ying + +description: | + The Freescale i.MX8qm/qxp Pixel Combiner takes two output streams from a + single display controller and manipulates the two streams to support a number + of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured as + either one screen, two screens, or virtual screens. The pixel combiner is + also responsible for generating some of the control signals for the pixel link + output channel. + +properties: + compatible: + enum: + - fsl,imx8qm-pixel-combiner + - fsl,imx8qxp-pixel-combiner + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: apb + + power-domains: + maxItems: 1 + +patternProperties: + "^channel@[0-1]$": + type: object + description: Represents a display stream of pixel combiner. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + description: The display stream index. + enum: [ 0, 1 ] + + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input endpoint of the display stream. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output endpoint of the display stream. + + required: + - "#address-cells" + - "#size-cells" + - reg + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - reg + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include + #include + pixel-combiner@56020000 { + compatible = "fsl,imx8qxp-pixel-combiner"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x56020000 0x10000>; + clocks = <&dc0_pixel_combiner_lpcg IMX_LPCG_CLK_4>; + clock-names = "apb"; + power-domains = <&pd IMX_SC_R_DC_0>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + port@0 { + reg = <0>; + + dc0_pixel_combiner_ch0_dc0_dpu_disp0: endpoint { + remote-endpoint = <&dc0_dpu_disp0_dc0_pixel_combiner_ch0>; + }; + }; + + port@1 { + reg = <1>; + + dc0_pixel_combiner_ch0_dc0_pixel_link0: endpoint { + remote-endpoint = <&dc0_pixel_link0_dc0_pixel_combiner_ch0>; + }; + }; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + port@0 { + reg = <0>; + + dc0_pixel_combiner_ch1_dc0_dpu_disp1: endpoint { + remote-endpoint = <&dc0_dpu_disp1_dc0_pixel_combiner_ch1>; + }; + }; + + port@1 { + reg = <1>; + + dc0_pixel_combiner_ch1_dc0_pixel_link1: endpoint { + remote-endpoint = <&dc0_pixel_link1_dc0_pixel_combiner_ch1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml new file mode 100644 index 000000000..38ecc7926 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-link.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qm/qxp Display Pixel Link + +maintainers: + - Liu Ying + +description: | + The Freescale i.MX8qm/qxp Display Pixel Link(DPL) forms a standard + asynchronous linkage between pixel sources(display controller or + camera module) and pixel consumers(imaging or displays). + It consists of two distinct functions, a pixel transfer function and a + control interface. Multiple pixel channels can exist per one control channel. + This binding documentation is only for pixel links whose pixel sources are + display controllers. + + The i.MX8qm/qxp Display Pixel Link is accessed via System Controller Unit(SCU) + firmware. + +properties: + compatible: + enum: + - fsl,imx8qm-dc-pixel-link + - fsl,imx8qxp-dc-pixel-link + + fsl,dc-id: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + u8 value representing the display controller index that the pixel link + connects to. + + fsl,dc-stream-id: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + u8 value representing the display controller stream index that the pixel + link connects to. + enum: [0, 1] + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: The pixel link input port node from upstream video source. + + patternProperties: + "^port@[1-4]$": + $ref: /schemas/graph.yaml#/properties/port + description: The pixel link output port node to downstream bridge. + + required: + - port@0 + - port@1 + - port@2 + - port@3 + - port@4 + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8qxp-dc-pixel-link + then: + properties: + fsl,dc-id: + const: 0 + + - if: + properties: + compatible: + contains: + const: fsl,imx8qm-dc-pixel-link + then: + properties: + fsl,dc-id: + enum: [0, 1] + +required: + - compatible + - fsl,dc-id + - fsl,dc-stream-id + - ports + +additionalProperties: false + +examples: + - | + dc0-pixel-link0 { + compatible = "fsl,imx8qxp-dc-pixel-link"; + fsl,dc-id = /bits/ 8 <0>; + fsl,dc-stream-id = /bits/ 8 <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* from dc0 pixel combiner channel0 */ + port@0 { + reg = <0>; + + dc0_pixel_link0_dc0_pixel_combiner_ch0: endpoint { + remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_pixel_link0>; + }; + }; + + /* to PXL2DPIs in MIPI/LVDS combo subsystems */ + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dc0_pixel_link0_mipi_lvds_0_pxl2dpi: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_lvds_0_pxl2dpi_dc0_pixel_link0>; + }; + + dc0_pixel_link0_mipi_lvds_1_pxl2dpi: endpoint@1 { + reg = <1>; + remote-endpoint = <&mipi_lvds_1_pxl2dpi_dc0_pixel_link0>; + }; + }; + + /* unused */ + port@2 { + reg = <2>; + }; + + /* unused */ + port@3 { + reg = <3>; + }; + + /* to imaging subsystem */ + port@4 { + reg = <4>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml new file mode 100644 index 000000000..e4e77fad0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pxl2dpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Pixel Link to Display Pixel Interface + +maintainers: + - Liu Ying + +description: | + The Freescale i.MX8qxp Pixel Link to Display Pixel Interface(PXL2DPI) + interfaces the pixel link 36-bit data output and the DSI controller’s + MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module + used in LVDS mode, to remap the pixel color codings between those modules. + This module is purely combinatorial. + + The i.MX8qxp PXL2DPI is controlled by Control and Status Registers(CSR) module. + The CSR module, as a system controller, contains the PXL2DPI's configuration + register. + +properties: + compatible: + const: fsl,imx8qxp-pxl2dpi + + fsl,sc-resource: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The SCU resource ID associated with this PXL2DPI instance. + + power-domains: + maxItems: 1 + + fsl,companion-pxl2dpi: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + A phandle which points to companion PXL2DPI which is used by downstream + LVDS Display Bridge(LDB) in split mode. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: The PXL2DPI input port node from pixel link. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: The PXL2DPI output port node to downstream bridge. + + required: + - port@0 + - port@1 + +required: + - compatible + - fsl,sc-resource + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include + pxl2dpi { + compatible = "fsl,imx8qxp-pxl2dpi"; + fsl,sc-resource = ; + power-domains = <&pd IMX_SC_R_MIPI_0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + mipi_lvds_0_pxl2dpi_dc_pixel_link0: endpoint@0 { + reg = <0>; + remote-endpoint = <&dc_pixel_link0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint@1 { + reg = <1>; + remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml new file mode 100644 index 000000000..b19be0804 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,ldb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP DPI to LVDS bridge chip + +maintainers: + - Marek Vasut + +description: | + The i.MX8MP mediamix contains two registers which are responsible + for configuring the on-SoC DPI-to-LVDS serializer. This describes + those registers as bridge within the DT. + +properties: + compatible: + const: fsl,imx8mp-ldb + + clocks: + maxItems: 1 + + clock-names: + const: ldb + + reg: + maxItems: 2 + + reg-names: + items: + - const: ldb + - const: lvds + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for DPI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-A output (panel or bridge). + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-B output (panel or bridge). + + required: + - port@0 + - port@1 + +required: + - compatible + - clocks + - ports + +additionalProperties: false + +examples: + - | + #include + + blk-ctrl { + #address-cells = <1>; + #size-cells = <1>; + + bridge@5c { + compatible = "fsl,imx8mp-ldb"; + clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; + clock-names = "ldb"; + reg = <0x5c 0x4>, <0x128 0x4>; + reg-names = "ldb", "lvds"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ldb_from_lcdif2: endpoint { + remote-endpoint = <&lcdif2_to_ldb>; + }; + }; + + port@1 { + reg = <1>; + + ldb_lvds_ch0: endpoint { + remote-endpoint = <&ldb_to_lvdsx4panel>; + }; + }; + + port@2 { + reg = <2>; + + ldb_lvds_ch1: endpoint { + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml new file mode 100644 index 000000000..a44d025d3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/google,cros-ec-anx7688.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS EC ANX7688 HDMI to DP Converter through Type-C Port + +maintainers: + - Nicolas Boichat + +description: | + ChromeOS EC ANX7688 is a display bridge that converts HDMI 2.0 to + DisplayPort 1.3 Ultra-HDi (4096x2160p60). It is an Analogix ANX7688 chip + which is connected to and operated by the ChromeOS Embedded Controller + (See google,cros-ec.yaml). It is accessed using I2C tunneling through + the EC and therefore its node should be a child of an EC I2C tunnel node + (See google,cros-ec-i2c-tunnel.yaml). + +properties: + compatible: + const: google,cros-ec-anx7688 + + reg: + maxItems: 1 + description: I2C address of the device. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for HDMI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: USB Type-c connector. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + i2c_tunnel_b: i2c-tunnel1 { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + anx7688: anx7688@2c { + compatible = "google,cros-ec-anx7688"; + reg = <0x2c>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + anx7688_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + port@1 { + reg = <1>; + anx7688_out: endpoint { + remote-endpoint = <&typec_connector>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml new file mode 100644 index 000000000..89490fdff --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ingenic,jz4780-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for Ingenic JZ4780 HDMI Transmitter + +maintainers: + - H. Nikolaus Schaller + +description: | + The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys DesignWare HDMI 1.4 + TX controller IP with accompanying PHY IP. + +allOf: + - $ref: synopsys,dw-hdmi.yaml# + +properties: + compatible: + const: ingenic,jz4780-dw-hdmi + + reg-io-width: + const: 4 + + clocks: + maxItems: 2 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input from LCD controller output. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Link to the HDMI connector. + +required: + - compatible + - clocks + - clock-names + - ports + - reg-io-width + +unevaluatedProperties: false + +examples: + - | + #include + + hdmi: hdmi@10180000 { + compatible = "ingenic,jz4780-dw-hdmi"; + reg = <0x10180000 0x8000>; + reg-io-width = <4>; + interrupt-parent = <&intc>; + interrupts = <3>; + clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>; + clock-names = "iahb", "isfr"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in: port@0 { + reg = <0>; + dw_hdmi_in: endpoint { + remote-endpoint = <&jz4780_lcd_out>; + }; + }; + hdmi_out: port@1 { + reg = <1>; + dw_hdmi_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml new file mode 100644 index 000000000..dcb1336ee --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/intel,keembay-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Devicetree bindings for Intel Keem Bay mipi dsi controller + +maintainers: + - Anitha Chrisanthus + - Edmond J Dea + +properties: + compatible: + const: intel,keembay-dsi + + reg: + items: + - description: MIPI registers range + + reg-names: + items: + - const: mipi + + clocks: + items: + - description: MIPI DSI clock + - description: MIPI DSI econfig clock + - description: MIPI DSI config clock + + clock-names: + items: + - const: clk_mipi + - const: clk_mipi_ecfg + - const: clk_mipi_cfg + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: MIPI DSI input port. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DSI output port. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + mipi-dsi@20900000 { + compatible = "intel,keembay-dsi"; + reg = <0x20900000 0x4000>; + reg-names = "mipi"; + clocks = <&scmi_clk 0x86>, + <&scmi_clk 0x88>, + <&scmi_clk 0x89>; + clock-names = "clk_mipi", "clk_mipi_ecfg", + "clk_mipi_cfg"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <&disp_out>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&adv7535_input>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml new file mode 100644 index 000000000..833d11b23 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ite,it6505.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ITE it6505 Device Tree Bindings + +maintainers: + - Allen Chen + +description: | + The IT6505 is a high-performance DisplayPort 1.1a transmitter, + fully compliant with DisplayPort 1.1a, HDCP 1.3 specifications. + The IT6505 supports color depth of up to 36 bits (12 bits/color) + and ensures robust transmission of high-quality uncompressed video + content, along with uncompressed and compressed digital audio content. + + Aside from the various video output formats supported, the IT6505 + also encodes and transmits up to 8 channels of I2S digital audio, + with sampling rate up to 192kHz and sample size up to 24 bits. + In addition, an S/PDIF input port takes in compressed audio of up to + 192kHz frame rate. + + Each IT6505 chip comes preprogrammed with an unique HDCP key, + in compliance with the HDCP 1.3 standard so as to provide secure + transmission of high-definition content. Users of the IT6505 need not + purchase any HDCP keys or ROMs. + +properties: + compatible: + const: ite,it6505 + + reg: + maxItems: 1 + + ovdd-supply: + description: I/O voltage + + pwr18-supply: + description: core voltage + + interrupts: + maxItems: 1 + description: interrupt specifier of INT pin + + reset-gpios: + maxItems: 1 + description: gpio specifier of RESET pin + + extcon: + maxItems: 1 + description: extcon specifier for the Power Delivery + + port: + $ref: /schemas/graph.yaml#/properties/port + description: A port node pointing to DPI host port node + +required: + - compatible + - ovdd-supply + - pwr18-supply + - interrupts + - reset-gpios + - extcon + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + dp-bridge@5c { + compatible = "ite,it6505"; + interrupts = <152 IRQ_TYPE_EDGE_FALLING 152 0>; + reg = <0x5c>; + pinctrl-names = "default"; + pinctrl-0 = <&it6505_pins>; + ovdd-supply = <&mt6358_vsim1_reg>; + pwr18-supply = <&it6505_pp18_reg>; + reset-gpios = <&pio 179 1>; + extcon = <&usbc_extcon>; + + port { + it6505_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml new file mode 100644 index 000000000..1b2185be9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ITE it66121 HDMI bridge Device Tree Bindings + +maintainers: + - Phong LE + - Neil Armstrong + +description: | + The IT66121 is a high-performance and low-power single channel HDMI + transmitter, fully compliant with HDMI 1.3a, HDCP 1.2 and backward compatible + to DVI 1.0 specifications. + +properties: + compatible: + const: ite,it66121 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low reset + + vrf12-supply: + description: Regulator for 1.2V analog core power. + + vcn33-supply: + description: Regulator for 3.3V digital core power. + + vcn18-supply: + description: Regulator for 1.8V IO core power. + + interrupts: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DPI input port. + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + bus-width: + description: + Endpoint bus width. + enum: + - 12 # 12 data lines connected and dual-edge mode + - 24 # 24 data lines connected and single-edge mode + default: 24 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: HDMI Connector port. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reset-gpios + - vrf12-supply + - vcn33-supply + - vcn18-supply + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + it66121hdmitx: hdmitx@4c { + compatible = "ite,it66121"; + pinctrl-names = "default"; + pinctrl-0 = <&ite_pins_default>; + vcn33-supply = <&mt6358_vcn33_wifi_reg>; + vcn18-supply = <&mt6358_vcn18_reg>; + vrf12-supply = <&mt6358_vrf12_reg>; + reset-gpios = <&pio 160 GPIO_ACTIVE_LOW>; + interrupt-parent = <&pio>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + reg = <0x4c>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + it66121_in: endpoint { + bus-width = <12>; + remote-endpoint = <&display_out>; + }; + }; + + port@1 { + reg = <1>; + hdmi_conn_out: endpoint { + remote-endpoint = <&hdmi_conn_in>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml new file mode 100644 index 000000000..674891ee2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912b.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT8912B MIPI to HDMI Bridge + +maintainers: + - Adrien Grassein + +description: | + The LT8912B is a bridge device which convert DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt8912b + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Primary MIPI port for MIPI input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + HDMI port, should be connected to a node compatible with the + hdmi-connector binding. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include + + i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@48 { + compatible = "lontium,lt8912b"; + reg = <0x48>; + reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_out_in: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml new file mode 100644 index 000000000..9a6e9b25d --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt9211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge. + +maintainers: + - Marek Vasut + +description: | + The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS + or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI. + +properties: + compatible: + enum: + - lontium,lt9211 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + vccio-supply: + description: Regulator for 1.8V IO power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI DSI port-1 for MIPI input or + LVDS port-1 for LVDS input or DPI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Additional MIPI port-2 for MIPI input or LVDS port-2 + for LVDS input. Used in combination with primary + port-1 to drive higher resolution displays + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI DSI port-1 for MIPI output or + LVDS port-1 for LVDS output or DPI output. + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Additional MIPI port-2 for MIPI output or LVDS port-2 + for LVDS output. Used in combination with primary + port-1 to drive higher resolution displays. + + required: + - port@0 + - port@2 + +required: + - compatible + - reg + - vccio-supply + - ports + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@3b { + compatible = "lontium,lt9211"; + reg = <0x3b>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + vccio-supply = <<9211_1v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml new file mode 100644 index 000000000..5b9d36f7a --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT9611(UXC) 2 Port MIPI to HDMI Bridge + +maintainers: + - Vinod Koul + +description: | + The LT9611 and LT9611UXC are bridge devices which convert DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt9611 + - lontium,lt9611uxc + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + vdd-supply: + description: Regulator for 1.8V MIPI phy power. + + vcc-supply: + description: Regulator for 3.3V IO power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI port-1 for MIPI input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Additional MIPI port-2 for MIPI input, used in combination + with primary MIPI port-1 to drive higher resolution displays + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + HDMI port for HDMI output + + required: + - port@0 + - port@2 + +required: + - compatible + - reg + - interrupts + - vdd-supply + - vcc-supply + - ports + +additionalProperties: false + +examples: + - | + #include + #include + + i2c10 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@3b { + compatible = "lontium,lt9611"; + reg = <0x3b>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <<9611_1v8>; + vcc-supply = <<9611_3v3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lt9611_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + lt9611_b: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + + port@2 { + reg = <2>; + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml new file mode 100644 index 000000000..84aafcbf0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -0,0 +1,186 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lvds-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Transparent LVDS encoders and decoders + +maintainers: + - Laurent Pinchart + +description: | + This binding supports transparent LVDS encoders and decoders that don't + require any configuration. + + LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple + incompatible data link layers have been used over time to transmit image data + to LVDS panels. This binding targets devices compatible with the following + specifications only. + + [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February + 1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) + [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National + Semiconductor + [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video + Electronics Standards Association (VESA) + + Those devices have been marketed under the FPD-Link and FlatLink brand names + among others. + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer + - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer + - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter + - const: lvds-encoder # Generic LVDS encoder compatible fallback + - items: + - enum: + - ti,ds90cf364a # For the DS90CF364A FPD-Link LVDS Receiver + - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver + - const: lvds-decoder # Generic LVDS decoders compatible fallback + - enum: + - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: | + For LVDS encoders, port 0 is the parallel input + For LVDS decoders, port 0 is the LVDS input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-mapping: + enum: + - jeida-18 + - jeida-24 + - vesa-24 + description: | + The color signals mapping order. See details in + Documentation/devicetree/bindings/display/lvds.yaml + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + For LVDS encoders, port 1 is the LVDS output + For LVDS decoders, port 1 is the parallel output + + required: + - port@0 + - port@1 + + pclk-sample: + description: + Data sampling on rising or falling edge. + enum: + - 0 # Falling edge + - 1 # Rising edge + default: 0 + + powerdown-gpios: + description: + The GPIO used to control the power down line of this device. + maxItems: 1 + + power-supply: true + +allOf: + - if: + not: + properties: + compatible: + contains: + const: lvds-decoder + then: + properties: + ports: + properties: + port@0: + properties: + endpoint: + properties: + data-mapping: false + + - if: + not: + properties: + compatible: + contains: + const: lvds-encoder + then: + properties: + pclk-sample: false + +required: + - compatible + - ports + +additionalProperties: false + + +examples: + - | + lvds-encoder { + compatible = "ti,ds90c185", "lvds-encoder"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_enc_in: endpoint { + remote-endpoint = <&display_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + + lvds_enc_out: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; + }; + }; + + - | + lvds-decoder { + compatible = "ti,ds90cf384a", "lvds-decoder"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_dec_in: endpoint { + remote-endpoint = <&display_out_lvds>; + }; + }; + + port@1 { + reg = <1>; + + lvds_dec_out: endpoint { + remote-endpoint = <&rgb_panel_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt new file mode 100644 index 000000000..09e0a21f7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt @@ -0,0 +1,91 @@ +Drivers for the second video output of the GE B850v3: + STDP4028-ge-b850v3-fw bridges (LVDS-DP) + STDP2690-ge-b850v3-fw bridges (DP-DP++) + +The video processing pipeline on the second output on the GE B850v3: + + Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output + +Each bridge has a dedicated flash containing firmware for supporting the custom +design. The result is that, in this design, neither the STDP4028 nor the +STDP2690 behave as the stock bridges would. The compatible strings include the +suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with +the firmware specific for the GE B850v3. + +The hardware do not provide control over the video processing pipeline, as the +two bridges behaves as a single one. The only interfaces exposed by the +hardware are EDID, HPD, and interrupts. + +stdp4028-ge-b850v3-fw required properties: + - compatible : "megachips,stdp4028-ge-b850v3-fw" + - reg : I2C bus address + - interrupts : one interrupt should be described here, as in + <0 IRQ_TYPE_LEVEL_HIGH> + - ports : One input port(reg = <0>) and one output port(reg = <1>) + +stdp2690-ge-b850v3-fw required properties: + compatible : "megachips,stdp2690-ge-b850v3-fw" + - reg : I2C bus address + - ports : One input port(reg = <0>) and one output port(reg = <1>) + +Example: + +&mux2_i2c2 { + clock-frequency = <100000>; + + stdp4028@73 { + compatible = "megachips,stdp4028-ge-b850v3-fw"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x73>; + + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + stdp4028_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + port@1 { + reg = <1>; + stdp4028_out: endpoint { + remote-endpoint = <&stdp2690_in>; + }; + }; + }; + }; + + stdp2690@72 { + compatible = "megachips,stdp2690-ge-b850v3-fw"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x72>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + stdp2690_in: endpoint { + remote-endpoint = <&stdp4028_out>; + }; + }; + + port@1 { + reg = <1>; + stdp2690_out: endpoint { + /* Connector for external display */ + }; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml new file mode 100644 index 000000000..350fb8f40 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Northwest Logic MIPI-DSI controller on i.MX SoCs + +maintainers: + - Guido Gúnther + - Robert Chiras + +description: | + NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for + the SOCs NWL MIPI-DSI host controller. + +allOf: + - $ref: ../dsi-controller.yaml# + +properties: + compatible: + const: fsl,imx8mq-nwl-dsi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + assigned-clock-parents: true + assigned-clock-rates: true + assigned-clocks: true + + clocks: + items: + - description: DSI core clock + - description: RX_ESC clock (used in escape mode) + - description: TX_ESC clock (used in escape mode) + - description: PHY_REF clock + - description: LCDIF clock + + clock-names: + items: + - const: core + - const: rx_esc + - const: tx_esc + - const: phy_ref + - const: lcdif + + mux-controls: + description: + mux controller node to use for operating the input mux + + phys: + maxItems: 1 + description: + A phandle to the phy module representing the DPHY + + phy-names: + items: + - const: dphy + + power-domains: + maxItems: 1 + + resets: + items: + - description: dsi byte reset line + - description: dsi dpi reset line + - description: dsi esc reset line + - description: dsi pclk reset line + + reset-names: + items: + - const: byte + - const: dpi + - const: esc + - const: pclk + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + Input port node to receive pixel data from the + display controller. Exactly one endpoint must be + specified. + properties: + endpoint@0: + $ref: /schemas/graph.yaml#/properties/endpoint + description: sub-node describing the input from LCDIF + + endpoint@1: + $ref: /schemas/graph.yaml#/properties/endpoint + description: sub-node describing the input from DCSS + + oneOf: + - required: + - endpoint@0 + - required: + - endpoint@1 + + unevaluatedProperties: false + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + DSI output port node to the panel or the next bridge + in the chain + + required: + - port@0 + - port@1 + +required: + - '#address-cells' + - '#size-cells' + - clock-names + - clocks + - compatible + - interrupts + - mux-controls + - phy-names + - phys + - ports + - reg + - reset-names + - resets + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + + dsi@30a00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mq-nwl-dsi"; + reg = <0x30A00000 0x300>; + clocks = <&clk IMX8MQ_CLK_DSI_CORE>, + <&clk IMX8MQ_CLK_DSI_AHB>, + <&clk IMX8MQ_CLK_DSI_IPG_DIV>, + <&clk IMX8MQ_CLK_DSI_PHY_REF>, + <&clk IMX8MQ_CLK_LCDIF_PIXEL>; + clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif"; + interrupts = ; + mux-controls = <&mux 0>; + power-domains = <&pgc_mipi>; + resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>, + <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>, + <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>, + <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>; + reset-names = "byte", "dpi", "esc", "pclk"; + phys = <&dphy>; + phy-names = "dphy"; + + panel@0 { + compatible = "rocktech,jh057n00900"; + reg = <0>; + vcc-supply = <®_2v8_p>; + iovcc-supply = <®_1v8_p>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0>; + mipi_dsi_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&lcdif_mipi_dsi>; + }; + }; + port@1 { + reg = <1>; + mipi_dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml new file mode 100644 index 000000000..107dd138e --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/nxp,ptn3460.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PTN3460 eDP to LVDS bridge + +maintainers: + - Sean Paul + +properties: + compatible: + const: nxp,ptn3460 + + reg: + description: I2C address of the bridge + maxItems: 1 + + edid-emulation: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: + The EDID emulation entry to use + Value Resolution Description + 0 1024x768 NXP Generic + 1 1920x1080 NXP Generic + 2 1920x1080 NXP Generic + 3 1600x900 Samsung LTM200KT + 4 1920x1080 Samsung LTM230HT + 5 1366x768 NXP Generic + 6 1600x900 ChiMei M215HGE + enum: [0, 1, 2, 3, 4, 5, 6] + + powerdown-gpios: + description: GPIO connected to the PD_N signal. + maxItems: 1 + + reset-gpios: + description: GPIO connected to the RST_N signal. + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for LVDS output + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for eDP input + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - edid-emulation + - powerdown-gpios + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include + + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + bridge@20 { + compatible = "nxp,ptn3460"; + reg = <0x20>; + edid-emulation = <5>; + powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + reg = <1>; + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml new file mode 100644 index 000000000..c4bf54397 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/nxp,tda998x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP TDA998x HDMI transmitter + +maintainers: + - Russell King + +properties: + compatible: + const: nxp,tda998x + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + video-ports: + default: 0x230145 + maximum: 0xffffff + description: + 24 bits value which defines how the video controller output is wired to + the TDA998x input. + + audio-ports: + description: + Array of 8-bit values, 2 values per DAI (Documentation/sound/soc/dai.rst). + The implementation allows one or two DAIs. + If two DAIs are defined, they must be of different type. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + minItems: 1 + items: + - description: | + The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S + (see include/dt-bindings/display/tda998x.h). + - description: + The second value defines the tda998x AP_ENA reg content when the + DAI in question is used. + + '#sound-dai-cells': + enum: [ 0, 1 ] + + nxp,calib-gpios: + maxItems: 1 + description: + Calibration GPIO, which must correspond with the gpio used for the + TDA998x interrupt pin. + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel input port + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + type: object + description: Parallel input port + + port@1: + type: object + description: HDMI output port + +required: + - compatible + - reg + +oneOf: + - required: + - port + - required: + - ports + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tda998x: hdmi-encoder@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + video-ports = <0x230145>; + + #sound-dai-cells = <1>; + /* DAI-format / AP_ENA reg value */ + audio-ports = , + ; + + port { + tda998x_in: endpoint { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ps8622.txt b/Documentation/devicetree/bindings/display/bridge/ps8622.txt new file mode 100644 index 000000000..c989c3807 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ps8622.txt @@ -0,0 +1,31 @@ +ps8622-bridge bindings + +Required properties: + - compatible: "parade,ps8622" or "parade,ps8625" + - reg: first i2c address of the bridge + - sleep-gpios: OF device-tree gpio specification for PD_ pin. + - reset-gpios: OF device-tree gpio specification for RST_ pin. + +Optional properties: + - lane-count: number of DP lanes to use + - use-external-pwm: backlight will be controlled by an external PWM + - video interfaces: Device node can contain video interface port + nodes for panel according to [1]. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + lvds-bridge@48 { + compatible = "parade,ps8622"; + reg = <0x48>; + sleep-gpios = <&gpc3 6 1 0 0>; + reset-gpios = <&gpc3 1 1 0 0>; + lane-count = <1>; + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml new file mode 100644 index 000000000..8ab156e0a --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ps8640.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MIPI DSI to eDP Video Format Converter Device Tree Bindings + +maintainers: + - Nicolas Boichat + +description: | + The PS8640 is a low power MIPI-to-eDP video format converter supporting + mobile devices with embedded panel resolutions up to 2048 x 1536. The + device accepts a single channel of MIPI DSI v1.1, with up to four lanes + plus clock, at a transmission rate up to 1.5Gbit/sec per lane. The + device outputs eDP v1.4, one or two lanes, at a link rate of up to + 3.24Gbit/sec per lane. + +properties: + compatible: + const: parade,ps8640 + + reg: + maxItems: 1 + description: Base I2C address of the device. + + powerdown-gpios: + maxItems: 1 + description: GPIO connected to active low powerdown. + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low reset. + + vdd12-supply: + description: Regulator for 1.2V digital core power. + + vdd33-supply: + description: Regulator for 3.3V digital core power. + + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for DSI input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for eDP output (panel or connector). + + required: + - port@0 + +required: + - compatible + - reg + - powerdown-gpios + - reset-gpios + - vdd12-supply + - vdd33-supply + - ports + +additionalProperties: false + +examples: + - | + #include + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + ps8640: edp-bridge@18 { + compatible = "parade,ps8640"; + reg = <0x18>; + powerdown-gpios = <&pio 116 GPIO_ACTIVE_LOW>; + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; + vdd12-supply = <&ps8640_fixed_1v2>; + vdd33-supply = <&mt6397_vgp2_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ps8640_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + ps8640_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + aux-bus { + panel { + compatible = "boe,nv133fhm-n62"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&ps8640_out>; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml new file mode 100644 index 000000000..afeeb9673 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi-csi2-tx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car MIPI DSI/CSI-2 Encoder + +maintainers: + - Laurent Pinchart + +description: | + This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas + R-Car V3U SoC. The encoder can operate in either DSI or CSI-2 mode, with up + to four data lanes. + +properties: + compatible: + enum: + - renesas,r8a779a0-dsi-csi2-tx # for V3U + + reg: + maxItems: 1 + + clocks: + items: + - description: Functional clock + - description: DSI (and CSI-2) functional clock + - description: PLL reference clock + + clock-names: + items: + - const: fck + - const: dsi + - const: pll + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel input port + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DSI/CSI-2 output port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - clocks + - power-domains + - resets + - ports + +additionalProperties: false + +examples: + - | + #include + #include + + dsi0: dsi-encoder@fed80000 { + compatible = "renesas,r8a779a0-dsi-csi2-tx"; + reg = <0xfed80000 0x10000>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 415>, + <&cpg CPG_CORE R8A779A0_CLK_DSI>, + <&cpg CPG_CORE R8A779A0_CLK_CP>; + clock-names = "fck", "dsi", "pll"; + resets = <&cpg 415>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&du_out_dsi0>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&sn65dsi86_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml new file mode 100644 index 000000000..e3ec697f8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,dw-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car DWC HDMI TX Encoder + +maintainers: + - Laurent Pinchart + +description: | + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP + with a companion PHY IP. + +allOf: + - $ref: synopsys,dw-hdmi.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r8a774a1-hdmi # for RZ/G2M compatible HDMI TX + - renesas,r8a774b1-hdmi # for RZ/G2N compatible HDMI TX + - renesas,r8a774e1-hdmi # for RZ/G2H compatible HDMI TX + - renesas,r8a7795-hdmi # for R-Car H3 compatible HDMI TX + - renesas,r8a7796-hdmi # for R-Car M3-W compatible HDMI TX + - renesas,r8a77961-hdmi # for R-Car M3-W+ compatible HDMI TX + - renesas,r8a77965-hdmi # for R-Car M3-N compatible HDMI TX + - const: renesas,rcar-gen3-hdmi + + reg-io-width: + const: 1 + + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel RGB input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: HDMI output port + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Sound input port + + required: + - port@0 + - port@1 + - port@2 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - interrupts + - ports + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + hdmi@fead0000 { + compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi"; + reg = <0xfead0000 0x10000>; + interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 729>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; + }; + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + port@2 { + reg = <2>; + rcar_dw_hdmi0_sound_in: endpoint { + remote-endpoint = <&hdmi_sound_out>; + }; + }; + }; + }; + + hdmi0-out { + compatible = "hdmi-connector"; + label = "HDMI0 OUT"; + type = "a"; + + port { + hdmi0_con: endpoint { + remote-endpoint = <&rcar_dw_hdmi0_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml new file mode 100644 index 000000000..bb9dbfb9b --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml @@ -0,0 +1,235 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,lvds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car LVDS Encoder + +maintainers: + - Laurent Pinchart + +description: | + These DT bindings describe the LVDS encoder embedded in the Renesas R-Car + Gen2, R-Car Gen3, RZ/G1 and RZ/G2 SoCs. + +properties: + compatible: + enum: + - renesas,r8a7742-lvds # for RZ/G1H compatible LVDS encoders + - renesas,r8a7743-lvds # for RZ/G1M compatible LVDS encoders + - renesas,r8a7744-lvds # for RZ/G1N compatible LVDS encoders + - renesas,r8a774a1-lvds # for RZ/G2M compatible LVDS encoders + - renesas,r8a774b1-lvds # for RZ/G2N compatible LVDS encoders + - renesas,r8a774c0-lvds # for RZ/G2E compatible LVDS encoders + - renesas,r8a774e1-lvds # for RZ/G2H compatible LVDS encoders + - renesas,r8a7790-lvds # for R-Car H2 compatible LVDS encoders + - renesas,r8a7791-lvds # for R-Car M2-W compatible LVDS encoders + - renesas,r8a7793-lvds # for R-Car M2-N compatible LVDS encoders + - renesas,r8a7795-lvds # for R-Car H3 compatible LVDS encoders + - renesas,r8a7796-lvds # for R-Car M3-W compatible LVDS encoders + - renesas,r8a77961-lvds # for R-Car M3-W+ compatible LVDS encoders + - renesas,r8a77965-lvds # for R-Car M3-N compatible LVDS encoders + - renesas,r8a77970-lvds # for R-Car V3M compatible LVDS encoders + - renesas,r8a77980-lvds # for R-Car V3H compatible LVDS encoders + - renesas,r8a77990-lvds # for R-Car E3 compatible LVDS encoders + - renesas,r8a77995-lvds # for R-Car D3 compatible LVDS encoders + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel RGB input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: LVDS output port + + required: + - port@0 + - port@1 + + power-domains: + maxItems: 1 + + renesas,companion: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the companion LVDS encoder. This property is mandatory + for the first LVDS encoder on R-Car D3 and E3, and RZ/G2E SoCs, and shall + point to the second encoder to be used as a companion in dual-link mode. + It shall not be set for any other LVDS encoder. + +required: + - compatible + - reg + - clocks + - power-domains + - resets + - ports + +if: + properties: + compatible: + enum: + - renesas,r8a774c0-lvds + - renesas,r8a77990-lvds + - renesas,r8a77995-lvds +then: + properties: + clocks: + minItems: 1 + items: + - description: Functional clock + - description: EXTAL input clock + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 1 + items: + - const: fck + # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. + # These clocks are optional. + - enum: + - extal + - dclkin.0 + - dclkin.1 + - enum: + - extal + - dclkin.0 + - dclkin.1 + - enum: + - extal + - dclkin.0 + - dclkin.1 + + required: + - clock-names + +else: + properties: + clocks: + items: + - description: Functional clock + + clock-names: + items: + - const: fck + + renesas,companion: false + +additionalProperties: false + +examples: + - | + #include + #include + + lvds@feb90000 { + compatible = "renesas,r8a7795-lvds"; + reg = <0xfeb90000 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 727>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + + - | + #include + #include + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a77990-lvds"; + reg = <0xfeb90000 0x20>; + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 727>; + + renesas,companion = <&lvds1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in1>; + }; + }; + }; + }; + + lvds1: lvds@feb90100 { + compatible = "renesas,r8a77990-lvds"; + reg = <0xfeb90100 0x20>; + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 726>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + port@1 { + reg = <1>; + lvds1_out: endpoint { + remote-endpoint = <&panel_in2>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml new file mode 100644 index 000000000..5a69547ad --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/sil,sii9022.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Image sii902x HDMI bridge + +maintainers: + - Boris Brezillon + +properties: + compatible: + oneOf: + - items: + - enum: + - sil,sii9022-cpi # CEC Programming Interface + - sil,sii9022-tpi # Transmitter Programming Interface + - const: sil,sii9022 + - const: sil,sii9022 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: Interrupt line used to inform the host about hotplug events. + + reset-gpios: + maxItems: 1 + + iovcc-supply: + description: I/O Supply Voltage (1.8V or 3.3V) + + cvcc12-supply: + description: Digital Core Supply Voltage (1.2V) + + '#sound-dai-cells': + enum: [ 0, 1 ] + description: | + <0> if only I2S or S/PDIF pin is wired, + <1> if both are wired. + HDMI audio is configured only if this property is found. + If HDMI audio is configured, the sii902x device becomes an I2S and/or + S/PDIF audio codec component (e.g. a digital audio sink), that can be + used in configuring full audio devices with simple-card or + audio-graph-card bindings. See their binding documents on how to describe + the way the + sii902x device is connected to the rest of the audio system: + Documentation/devicetree/bindings/sound/simple-card.yaml + Documentation/devicetree/bindings/sound/audio-graph-card.yaml + Note: In case of the audio-graph-card binding the used port index should + be 3. + + sil,i2s-data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + uniqueItems: true + items: + enum: [ 0, 1, 2, 3 ] + description: + Each integer indicates which I2S pin is connected to which audio FIFO. + The first integer selects the I2S audio pin for the first audio FIFO#0 + (HDMI channels 1&2), the second for FIFO#1 (HDMI channels 3&4), and so + on. There are 4 FIFOs and 4 I2S pins (SD0 - SD3). Any I2S pin can be + connected to any FIFO, but there can be no gaps. E.g. an I2S pin must be + mapped to FIFO#0 and FIFO#1 before mapping a channel to FIFO#2. The + default value is <0>, describing SD0 pin being routed to HDMI audio + FIFO#0. + + clocks: + maxItems: 1 + description: MCLK input. MCLK can be used to produce HDMI audio CTS values. + + clock-names: + const: mclk + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel RGB input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: HDMI output port + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Sound input port + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + reset-gpios = <&pioA 1 0>; + iovcc-supply = <&v3v3_hdmi>; + cvcc12-supply = <&v1v2_hdmi>; + + #sound-dai-cells = <0>; + sil,i2s-data-lanes = < 0 1 2 >; + clocks = <&mclk>; + clock-names = "mclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&dc_out>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml new file mode 100644 index 000000000..f88ddfe48 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/sil,sii9234.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Image SiI9234 HDMI/MHL bridge + +maintainers: + - Maciej Purski + +properties: + compatible: + const: sil,sii9234 + + reg: + description: I2C address for TPI interface + maxItems: 1 + + avcc12-supply: + description: TMDS Analog Supply Voltage, 1.2V + + avcc33-supply: + description: MHL/USB Switch Supply Voltage, 3.3V + + cvcc12-supply: + description: Digital Core Supply Voltage, 1.2V + + iovcc18-supply: + description: I/O voltage supply, 1.8V + + interrupts: + maxItems: 1 + + reset-gpios: + description: GPIO connected to the reset pin. + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for HDMI (encoder) input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + MHL to connector port + + required: + - port@0 + +required: + - compatible + - reg + - avcc12-supply + - avcc33-supply + - cvcc12-supply + - iovcc18-supply + - interrupts + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include + #include + + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + bridge@39 { + compatible = "sil,sii9234"; + reg = <0x39>; + avcc12-supply = <&vsil12>; + avcc33-supply = <&vcc33mhl>; + cvcc12-supply = <&vsil12>; + iovcc18-supply = <&vcc18mhl>; + interrupt-parent = <&gpf3>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + + port@1 { + reg = <1>; + mhl_to_connector: endpoint { + remote-endpoint = <&connector_to_mhl>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt new file mode 100644 index 000000000..b05052f7d --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt @@ -0,0 +1,33 @@ +Silicon Image SiI8620 HDMI/MHL bridge bindings + +Required properties: + - compatible: "sil,sii8620" + - reg: i2c address of the bridge + - cvcc10-supply: Digital Core Supply Voltage (1.0V) + - iovcc18-supply: I/O Supply Voltage (1.8V) + - interrupts: interrupt specifier of INT pin + - reset-gpios: gpio specifier of RESET pin + - clocks, clock-names: specification and name of "xtal" clock + - video interfaces: Device node can contain video interface port + node for HDMI encoder according to [1]. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + sii8620@39 { + reg = <0x39>; + compatible = "sil,sii8620"; + cvcc10-supply = <&ldo36_reg>; + iovcc18-supply = <&ldo34_reg>; + interrupt-parent = <&gpf0>; + interrupts = <2 0>; + reset-gpio = <&gpv7 0 0>; + clocks = <&pmu_system_controller 0>; + clock-names = "xtal"; + + port { + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml new file mode 100644 index 000000000..43cf4df98 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/simple-bridge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Transparent non-programmable DRM bridges + +maintainers: + - Laurent Pinchart + - Maxime Ripard + +description: | + This binding supports transparent non-programmable bridges that don't require + any configuration, with a single input and a single output. + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,ths8134a + - ti,ths8134b + - const: ti,ths8134 + - items: + - const: corpro,gm7123 + - const: adi,adv7123 + - enum: + - adi,adv7123 + - dumb-vga-dac + - ti,opa362 + - ti,ths8134 + - ti,ths8135 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: The bridge input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: The bridge output + + required: + - port@0 + - port@1 + + enable-gpios: + maxItems: 1 + description: GPIO controlling bridge enable + + vdd-supply: + description: Power supply for the bridge + +required: + - compatible + - ports + +additionalProperties: false + +examples: + - | + bridge { + compatible = "ti,ths8134a", "ti,ths8134"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&tcon0_out_vga>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml new file mode 100644 index 000000000..11fd68a70 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/snps,dw-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare MIPI DSI host controller + +maintainers: + - Philippe CORNU + +description: | + This document defines device tree properties for the Synopsys DesignWare MIPI + DSI host controller. It doesn't constitue a device tree binding specification + by itself but is meant to be referenced by platform-specific device tree + bindings. + + When referenced from platform device tree bindings the properties defined in + this document are defined as follows. The platform device tree bindings are + responsible for defining whether each property is required or optional. + +allOf: + - $ref: ../dsi-controller.yaml# + +properties: + reg: + maxItems: 1 + + clocks: + items: + - description: Module clock + - description: DSI bus clock for either AHB and APB + - description: Pixel clock for the DPI/RGB input + minItems: 2 + + clock-names: + items: + - const: ref + - const: pclk + - const: px_clk + minItems: 2 + + resets: + maxItems: 1 + + reset-names: + const: apb + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input node to receive pixel data. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DSI output node to panel. + + required: + - port@0 + - port@1 + +required: + - clock-names + - clocks + - ports + - reg + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml new file mode 100644 index 000000000..4b7e54a8f --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/synopsys,dw-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Synopsys DesignWare HDMI TX Controller + +maintainers: + - Laurent Pinchart + +description: | + This document defines device tree properties for the Synopsys DesignWare HDMI + TX controller (DWC HDMI TX) IP core. It doesn't constitute a full device tree + binding specification by itself but is meant to be referenced by device tree + bindings for the platform-specific integrations of the DWC HDMI TX. + + When referenced from platform device tree bindings the properties defined in + this document are defined as follows. The platform device tree bindings are + responsible for defining whether each property is required or optional. + +properties: + reg: + maxItems: 1 + + reg-io-width: + description: + Width (in bytes) of the registers specified by the reg property. + enum: [1, 4] + default: 1 + + clocks: + minItems: 2 + maxItems: 5 + items: + - description: The bus clock for either AHB and APB + - description: The internal register configuration clock + additionalItems: true + + clock-names: + minItems: 2 + maxItems: 5 + items: + - const: iahb + - const: isfr + additionalItems: true + + interrupts: + maxItems: 1 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml new file mode 100644 index 000000000..8ae382429 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/thine,thc63lvd1024.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Thine Electronics THC63LVD1024 LVDS Decoder + +maintainers: + - Jacopo Mondi + - Laurent Pinchart + +description: | + The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS + streams to parallel data outputs. The chip supports single/dual input/output + modes, handling up to two LVDS input streams and up to two digital CMOS/TTL + outputs. + + Single or dual operation mode, output data mapping and DDR output modes are + configured through input signals and the chip does not expose any control + bus. + +properties: + compatible: + const: thine,thc63lvd1024 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + The device can operate in single or dual input and output modes. + + When operating in single input mode, all pixels are received on port@0, + and port@1 shall not contain any endpoint. In dual input mode, + even-numbered pixels are received on port@0 and odd-numbered pixels on + port@1, and both port@0 and port@1 shall contain endpoints. + + When operating in single output mode all pixels are output from the first + CMOS/TTL port and port@3 shall not contain any endpoint. In dual output + mode pixels are output from both CMOS/TTL ports and both port@2 and + port@3 shall contain endpoints. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: First LVDS input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Second LVDS input port + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: First digital CMOS/TTL parallel output + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Second digital CMOS/TTL parallel output + + required: + - port@0 + - port@2 + + oe-gpios: + maxItems: 1 + description: Output enable GPIO signal, pin name "OE", active high. + + powerdown-gpios: + maxItems: 1 + description: Power down GPIO signal, pin name "/PDWN", active low. + + vcc-supply: + description: + Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and + digital circuitry. + +required: + - compatible + - ports + - vcc-supply + +additionalProperties: false + +examples: + - | + #include + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + + vcc-supply = <®_lvds_vcc>; + powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_dec_in_0: endpoint { + remote-endpoint = <&lvds_out>; + }; + }; + + port@2 { + reg = <2>; + + lvds_dec_out_2: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml new file mode 100644 index 000000000..542193d77 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,dlpc3433.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI DLPC3433 MIPI DSI to DMD bridge + +maintainers: + - Jagan Teki + - Christopher Vollo + +description: | + TI DLPC3433 is a MIPI DSI based display controller bridge + for processing high resolution DMD based projectors. + + It has a flexible configuration of MIPI DSI and DPI signal + input that produces a DMD output in RGB565, RGB666, RGB888 + formats. + + It supports upto 720p resolution with 60 and 120 Hz refresh + rates. + +properties: + compatible: + const: ti,dlpc3433 + + reg: + enum: + - 0x1b + - 0x1d + + enable-gpios: + description: PROJ_ON pin, chip powers up PROJ_ON is high. + + vcc_intf-supply: + description: A 1.8V/3.3V supply that power the Host I/O. + + vcc_flsh-supply: + description: A 1.8V/3.3V supply that power the Flash I/O. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Video port for MIPI DSI input. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for DMD output. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - enable-gpios + - ports + +additionalProperties: false + +examples: + - | + #include + + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + bridge@1b { + compatible = "ti,dlpc3433"; + reg = <0x1b>; + enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + bridge_in_dsi: endpoint { + remote-endpoint = <&dsi_out_bridge>; + data-lanes = <1 2 3 4>; + }; + }; + + port@1 { + reg = <1>; + + bridge_out_panel: endpoint { + remote-endpoint = <&panel_out_bridge>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml new file mode 100644 index 000000000..48a97bb3e --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi83.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SN65DSI83 and SN65DSI84 DSI to LVDS bridge chip + +maintainers: + - Marek Vasut + +description: | + Texas Instruments SN65DSI83 1x Single-link MIPI DSI + to 1x Single-link LVDS + https://www.ti.com/lit/gpn/sn65dsi83 + Texas Instruments SN65DSI84 1x Single-link MIPI DSI + to 1x Dual-link or 2x Single-link LVDS + https://www.ti.com/lit/gpn/sn65dsi84 + +properties: + compatible: + enum: + - ti,sn65dsi83 + - ti,sn65dsi84 + + reg: + enum: + - 0x2c + - 0x2d + + enable-gpios: + maxItems: 1 + description: GPIO specifier for bridge_en pin (active high). + + vcc-supply: + description: A 1.8V power supply (see regulator/regulator.yaml). + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Video port for MIPI DSI Channel-A input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Video port for MIPI DSI Channel-B input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-A output (panel or bridge). + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-B output (panel or bridge). + + required: + - port@0 + - port@2 + +required: + - compatible + - reg + - ports + +allOf: + - if: + properties: + compatible: + contains: + const: ti,sn65dsi83 + then: + properties: + ports: + properties: + port@1: false + port@3: false + + - if: + properties: + compatible: + contains: + const: ti,sn65dsi84 + then: + properties: + ports: + properties: + port@1: false + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi83"; + reg = <0x2d>; + + enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + vcc-supply = <®_sn65dsi83_1v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&dsi0_out>; + data-lanes = <1 2 3 4>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml new file mode 100644 index 000000000..911564468 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml @@ -0,0 +1,277 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SN65DSI86 DSI to eDP bridge chip + +maintainers: + - Sandeep Panda + +description: | + The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP. + https://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf + +properties: + compatible: + const: ti,sn65dsi86 + + reg: + enum: [ 0x2c, 0x2d ] + + enable-gpios: + maxItems: 1 + description: GPIO specifier for bridge_en pin (active high). + + suspend-gpios: + maxItems: 1 + description: GPIO specifier for GPIO1 pin on bridge (active low). + + no-hpd: + type: boolean + description: + Set if the HPD line on the bridge isn't hooked up to anything or is + otherwise unusable. + + vccio-supply: + description: A 1.8V supply that powers the digital IOs. + + vpll-supply: + description: A 1.8V supply that powers the DisplayPort PLL. + + vcca-supply: + description: A 1.2V supply that powers the analog circuits. + + vcc-supply: + description: A 1.2V supply that powers the digital core. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: + Clock specifier for input reference clock. The reference clock rate must + be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz. + + clock-names: + const: refclk + + gpio-controller: true + '#gpio-cells': + const: 2 + description: + First cell is pin number, second cell is flags. GPIO pin numbers are + 1-based to match the datasheet. See ../../gpio/gpio.txt for more + information. + + '#pwm-cells': + const: 1 + description: See ../../pwm/pwm.yaml for description of the cell formats. + + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DSI input + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Video port for eDP output (panel or connector). + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + data-lanes: + oneOf: + - minItems: 1 + maxItems: 1 + uniqueItems: true + items: + enum: + - 0 + - 1 + description: + If you have 1 logical lane the bridge supports routing + to either port 0 or port 1. Port 0 is suggested. + See ../../media/video-interface.txt for details. + + - minItems: 2 + maxItems: 2 + uniqueItems: true + items: + enum: + - 0 + - 1 + description: + If you have 2 logical lanes the bridge supports + reordering but only on physical ports 0 and 1. + See ../../media/video-interface.txt for details. + + - minItems: 4 + maxItems: 4 + uniqueItems: true + items: + enum: + - 0 + - 1 + - 2 + - 3 + description: + If you have 4 logical lanes the bridge supports + reordering in any way. + See ../../media/video-interface.txt for details. + + lane-polarities: + minItems: 1 + maxItems: 4 + items: + enum: + - 0 + - 1 + description: See ../../media/video-interface.txt + + dependencies: + lane-polarities: [data-lanes] + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - vccio-supply + - vpll-supply + - vcca-supply + - vcc-supply + - ports + +additionalProperties: false + +examples: + - | + #include + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + interrupt-parent = <&tlmm>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&src_pp1800_s4a>; + vccio-supply = <&src_pp1800_s4a>; + vcca-supply = <&src_pp1200_l2a>; + vcc-supply = <&src_pp1200_l2a>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel { + compatible = "boe,nv133fhm-n62"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; + }; + - | + #include + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; + suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>; + + interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; + + vccio-supply = <&pm8916_l17>; + vcca-supply = <&pm8916_l6>; + vpll-supply = <&pm8916_l17>; + vcc-supply = <&pm8916_l6>; + + clock-names = "refclk"; + clocks = <&input_refclk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + edp_bridge_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + edp_bridge_out: endpoint { + data-lanes = <2 1 3 0>; + lane-polarities = <0 1 0 1>; + remote-endpoint = <&edp_panel_in>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml new file mode 100644 index 000000000..4c5dd8ec2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,tfp410.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TFP410 DPI to DVI encoder + +maintainers: + - Tomi Valkeinen + - Jyri Sarha + +properties: + compatible: + const: ti,tfp410 + + reg: + description: I2C address of the device. + maxItems: 1 + + powerdown-gpios: + maxItems: 1 + + ti,deskew: + description: + Data de-skew value in 350ps increments, from 0 to 7, as configured + through the DK[3:1] pins. The de-skew multiplier is computed as + (DK[3:1] - 4), so it ranges from -4 to 3. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DPI input port. + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + pclk-sample: + description: + Endpoint sampling edge. + enum: + - 0 # Falling edge + - 1 # Rising edge + default: 0 + + bus-width: + description: + Endpoint bus width. + enum: + - 12 # 12 data lines connected and dual-edge mode + - 24 # 24 data lines connected and single-edge mode + default: 24 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DVI output port. + + required: + - port@0 + - port@1 + +required: + - compatible + - ports + +if: + required: + - reg +then: + properties: + ti,deskew: false +else: + required: + - ti,deskew + +additionalProperties: false + +examples: + - | + #include + + tfp410: encoder { + compatible = "ti,tfp410"; + powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; + ti,deskew = <3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tfp410_in: endpoint { + pclk-sample = <1>; + bus-width = <24>; + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + tfp410_out: endpoint { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml new file mode 100644 index 000000000..a412a1da9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358762.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358762 MIPI DSI to MIPI DPI bridge + +maintainers: + - Marek Vasut + +description: | + The TC358762 is bridge device which converts MIPI DSI to MIPI DPI. + +properties: + compatible: + enum: + - toshiba,tc358762 + + reg: + maxItems: 1 + description: virtual channel number of a DSI peripheral + + vddc-supply: + description: Regulator for 1.2V internal core power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DSI input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DPI output (panel or connector). + + required: + - port@1 + +required: + - compatible + - reg + - vddc-supply + - ports + +additionalProperties: false + +examples: + - | + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + bridge@0 { + reg = <0>; + compatible = "toshiba,tc358762"; + vddc-supply = <&vcc_1v2_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt new file mode 100644 index 000000000..8f9abf28a --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt @@ -0,0 +1,35 @@ +TC358764 MIPI-DSI to LVDS panel bridge + +Required properties: + - compatible: "toshiba,tc358764" + - reg: the virtual channel number of a DSI peripheral + - vddc-supply: core voltage supply, 1.2V + - vddio-supply: I/O voltage supply, 1.8V or 3.3V + - vddlvds-supply: LVDS1/2 voltage supply, 3.3V + - reset-gpios: a GPIO spec for the reset pin + +The device node can contain following 'port' child nodes, +according to the OF graph bindings defined in [1]: + 0: DSI Input, not required, if the bridge is DSI controlled + 1: LVDS Output, mandatory + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + bridge@0 { + reg = <0>; + compatible = "toshiba,tc358764"; + vddc-supply = <&vcc_1v2_reg>; + vddio-supply = <&vcc_1v8_reg>; + vddlvds-supply = <&vcc_3v3_reg>; + reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + lvds_ep: endpoint { + remote-endpoint = <&panel_ep>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml new file mode 100644 index 000000000..ed280053e --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml @@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358767 eDP bridge bindings + +maintainers: + - Andrey Gusakov + +description: The TC358767 is bridge device which converts DSI/DPI to eDP/DP + +properties: + compatible: + const: toshiba,tc358767 + + reg: + enum: + - 0x68 + - 0x0f + description: | + i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins + + clock-names: + const: "ref" + + clocks: + maxItems: 1 + description: | + OF device-tree clock specification for refclk input. The reference. + clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz. + + shutdown-gpios: + maxItems: 1 + description: | + OF device-tree gpio specification for SD pin(active high shutdown input) + + reset-gpios: + maxItems: 1 + description: | + OF device-tree gpio specification for RSTX pin(active low system reset) + + toshiba,hpd-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 + - 1 + description: TC358767 GPIO pin number to which HPD is connected to (0 or 1) + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: | + DSI input port. The remote endpoint phandle should be a + reference to a valid DSI output endpoint node + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + DPI input/output port. The remote endpoint phandle should be a + reference to a valid DPI output or input endpoint node. + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: | + eDP/DP output port. The remote endpoint phandle should be a + reference to a valid eDP panel input endpoint node. This port is + optional, treated as DP panel if not defined + + oneOf: + - required: + - port@0 + - required: + - port@1 + + +required: + - compatible + - reg + - clock-names + - clocks + - ports + +additionalProperties: false + +examples: + - | + #include + + /* DPI input and eDP output */ + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + edp-bridge@68 { + compatible = "toshiba,tc358767"; + reg = <0x68>; + shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + clock-names = "ref"; + clocks = <&edp_refclk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + bridge_in_0: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@2 { + reg = <2>; + + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + - | + /* DPI input and DP output */ + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + edp-bridge@68 { + compatible = "toshiba,tc358767"; + reg = <0x68>; + shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + clock-names = "ref"; + clocks = <&edp_refclk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + bridge_in_1: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml new file mode 100644 index 000000000..0b6f5bef1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358768.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toschiba TC358768/TC358778 Parallel RGB to MIPI DSI bridge + +maintainers: + - Peter Ujfalusi + +description: | + The TC358768/TC358778 is bridge device which converts RGB to DSI. + +properties: + compatible: + enum: + - toshiba,tc358768 + - toshiba,tc358778 + + reg: + maxItems: 1 + description: base I2C address of the device + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low RESX pin + + vddc-supply: + description: Regulator for 1.2V internal core power. + + vddmipi-supply: + description: Regulator for 1.2V for the MIPI. + + vddio-supply: + description: Regulator for 1.8V - 3.3V IO power. + + clocks: + maxItems: 1 + + clock-names: + const: refclk + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: | + Video port for RGB input + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + data-lines: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 16, 18, 24 ] + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + Video port for DSI output (panel or connector). + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - vddc-supply + - vddmipi-supply + - vddio-supply + - ports + +allOf: + - $ref: ../dsi-controller.yaml# + +unevaluatedProperties: false + +examples: + - | + #include + + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + dsi_bridge: dsi@e { + compatible = "toshiba,tc358768"; + reg = <0xe>; + + clocks = <&tc358768_refclk>; + clock-names = "refclk"; + + reset-gpios = <&pcf_display_board 0 GPIO_ACTIVE_LOW>; + + vddc-supply = <&v1_2d>; + vddmipi-supply = <&v1_2d>; + vddio-supply = <&v3_3d>; + + dsi_bridge_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + rgb_in: endpoint { + remote-endpoint = <&dpi_out>; + data-lines = <24>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&lcd_in>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml new file mode 100644 index 000000000..10471c6c1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358775 DSI to LVDS bridge bindings + +maintainers: + - Vinay Simha BN + +description: | + This binding supports DSI to LVDS bridge TC358775 + + MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane. + Video frame size: + Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel + limited by 135 MHz LVDS speed + Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display + panel, limited by 270 MHz LVDS speed. + +properties: + compatible: + const: toshiba,tc358775 + + reg: + maxItems: 1 + description: i2c address of the bridge, 0x0f + + vdd-supply: + description: 1.2V LVDS Power Supply + + vddio-supply: + description: 1.8V IO Power Supply + + stby-gpios: + maxItems: 1 + description: Standby pin, Low active + + reset-gpios: + maxItems: 1 + description: Hardware reset, Low active + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: | + DSI Input. The remote endpoint phandle should be a + reference to a valid mipi_dsi_host device node. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + Video port for LVDS output (panel or connector). + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: | + Video port for Dual link LVDS output (panel or connector). + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + - stby-gpios + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include + + /* For single-link LVDS display panel */ + + i2c@78b8000 { + /* On High speed expansion */ + label = "HS-I2C2"; + reg = <0x078b8000 0x500>; + clock-frequency = <400000>; /* fastmode operation */ + #address-cells = <1>; + #size-cells = <0>; + + tc_bridge: bridge@f { + compatible = "toshiba,tc358775"; + reg = <0x0f>; + + vdd-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; + + stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>; + reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + d2l_in_test: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + lvds_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + + dsi@1a98000 { + reg = <0x1a98000 0x25c>; + reg-names = "dsi_ctrl"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + dsi0_out: endpoint { + remote-endpoint = <&d2l_in_test>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; + + - | + /* For dual-link LVDS display panel */ + + i2c@78b8000 { + /* On High speed expansion */ + label = "HS-I2C2"; + reg = <0x078b8000 0x500>; + clock-frequency = <400000>; /* fastmode operation */ + #address-cells = <1>; + #size-cells = <0>; + + tc_bridge_dual: bridge@f { + compatible = "toshiba,tc358775"; + reg = <0x0f>; + + vdd-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; + + stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>; + reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + d2l_in_dual: endpoint { + remote-endpoint = <&dsi0_out_dual>; + }; + }; + + port@1 { + reg = <1>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in0>; + }; + }; + + port@2 { + reg = <2>; + lvds1_out: endpoint { + remote-endpoint = <&panel_in1>; + }; + }; + }; + }; + }; + + dsi@1a98000 { + reg = <0x1a98000 0x25c>; + reg-names = "dsi_ctrl"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + dsi0_out_dual: endpoint { + remote-endpoint = <&d2l_in_dual>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; +... -- cgit v1.2.3