From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../bindings/iio/adc/qcom,spmi-vadc.yaml | 279 +++++++++++++++++++++ 1 file changed, 279 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml (limited to 'Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml') diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml new file mode 100644 index 000000000..8bac0c412 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -0,0 +1,279 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-vadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm's SPMI PMIC ADC + +maintainers: + - Andy Gross + - Bjorn Andersson + +description: | + SPMI PMIC voltage ADC (VADC) provides interface to clients to read + voltage. The VADC is a 15-bit sigma-delta ADC. + SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read + voltage. The VADC is a 16-bit sigma-delta ADC. + +properties: + compatible: + oneOf: + - items: + - const: qcom,pms405-adc + - const: qcom,spmi-adc-rev2 + + - items: + - enum: + - qcom,spmi-vadc + - qcom,spmi-adc5 + - qcom,spmi-adc-rev2 + - qcom,spmi-adc7 + + reg: + description: VADC base address in the SPMI PMIC register map + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#io-channel-cells': + const: 1 + + interrupts: + maxItems: 1 + description: + End of conversion interrupt. + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + - '#io-channel-cells' + +patternProperties: + "^.*@[0-9a-f]+$": + type: object + additionalProperties: false + description: | + Represents the external channels which are connected to the ADC. + For compatible property "qcom,spmi-vadc" following channels, also known as + reference point channels, are used for result calibration and their channel + configuration nodes should be defined: + VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV, + VADC_GND_REF and VADC_VDD_VADC. + + properties: + reg: + maxItems: 1 + description: | + ADC channel number. + See include/dt-bindings/iio/qcom,spmi-vadc.h + For PMIC7 ADC, the channel numbers are specified separately per PMIC + in the PMIC-specific files in include/dt-bindings/iio/. + + label: + $ref: /schemas/types.yaml#/definitions/string + description: | + ADC input of the platform as seen in the schematics. + For thermistor inputs connected to generic AMUX or GPIO inputs + these can vary across platform for the same pins. Hence select + the platform schematics name for this channel. + + qcom,decimation: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + This parameter is used to decrease ADC sampling rate. + Quicker measurements can be made by reducing decimation ratio. + + qcom,pre-scaling: + description: | + Used for scaling the channel input signal before the signal is + fed to VADC. The configuration for this node is to know the + pre-determined ratio and use it for post scaling. It is a pair of + integers, denoting the numerator and denominator of the fraction by which + input signal is multiplied. For example, <1 3> indicates the signal is scaled + down to 1/3 of its value before ADC measurement. + If property is not found default value depending on chip will be used. + $ref: /schemas/types.yaml#/definitions/uint32-array + oneOf: + - items: + - const: 1 + - enum: [ 1, 3, 4, 6, 20, 8, 10 ] + - items: + - const: 10 + - const: 81 + + qcom,ratiometric: + description: | + Channel calibration type. + - For compatible property "qcom,spmi-vadc", if this property is + specified VADC will use the VDD reference (1.8V) and GND for + channel calibration. If property is not found, channel will be + calibrated with 0.625V and 1.25V reference channels, also + known as absolute calibration. + - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" and + "qcom,spmi-adc-rev2", if this property is specified VADC will use + the VDD reference (1.875V) and GND for channel calibration. If + property is not found, channel will be calibrated with 0V and 1.25V + reference channels, also known as absolute calibration. + type: boolean + + qcom,hw-settle-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Time between AMUX getting configured and the ADC starting + conversion. The 'hw_settle_time' is an index used from valid values + and programmed in hardware to achieve the hardware settling delay. + + qcom,avg-samples: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Number of samples to be used for measurement. + Averaging provides the option to obtain a single measurement + from the ADC that is an average of multiple samples. The value + selected is 2^(value). + + required: + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,spmi-vadc + + then: + patternProperties: + "^.*@[0-9a-f]+$": + properties: + qcom,decimation: + enum: [ 512, 1024, 2048, 4096 ] + default: 512 + + qcom,hw-settle-time: + enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2, + 4, 6, 8, 10 ] + default: 0 + + qcom,avg-samples: + enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 ] + default: 1 + + - if: + properties: + compatible: + contains: + const: qcom,spmi-adc-rev2 + + then: + patternProperties: + "^.*@[0-9a-f]+$": + properties: + qcom,decimation: + enum: [ 256, 512, 1024 ] + default: 1024 + + qcom,hw-settle-time: + enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2, + 4, 6, 8, 10 ] + default: 0 + + qcom,avg-samples: + enum: [ 1, 2, 4, 8, 16 ] + default: 1 + + - if: + properties: + compatible: + contains: + const: qcom,spmi-adc5 + + then: + patternProperties: + "^.*@[0-9a-f]+$": + properties: + qcom,decimation: + enum: [ 250, 420, 840 ] + default: 840 + + qcom,hw-settle-time: + enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2, + 4, 6, 8, 10, 16, 32, 64, 128 ] + default: 15 + + qcom,avg-samples: + enum: [ 1, 2, 4, 8, 16 ] + default: 1 + + - if: + properties: + compatible: + contains: + const: qcom,spmi-adc7 + + then: + patternProperties: + "^.*@[0-9a-f]+$": + properties: + qcom,decimation: + enum: [ 85, 340, 1360 ] + default: 1360 + + qcom,hw-settle-time: + enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, + 8000, 16000, 32000, 64000, 128000 ] + default: 15 + + qcom,avg-samples: + enum: [ 1, 2, 4, 8, 16 ] + default: 1 + +additionalProperties: false + +examples: + - | + spmi_bus { + #address-cells = <1>; + #size-cells = <0>; + /* VADC node */ + pmic_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 0x1>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + /* Channel node */ + adc-chan@39 { + reg = <0x39>; + qcom,decimation = <512>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,avg-samples = <1>; + qcom,pre-scaling = <1 3>; + }; + + adc-chan@9 { + reg = <0x9>; + }; + + adc-chan@a { + reg = <0xa>; + }; + + adc-chan@e { + reg = <0xe>; + }; + + adc-chan@f { + reg = <0xf>; + }; + }; + }; -- cgit v1.2.3