From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../bindings/iommu/allwinner,sun50i-h6-iommu.yaml | 61 +++++ .../devicetree/bindings/iommu/apple,dart.yaml | 84 ++++++ .../devicetree/bindings/iommu/apple,sart.yaml | 52 ++++ .../devicetree/bindings/iommu/arm,smmu-v3.yaml | 95 +++++++ .../devicetree/bindings/iommu/arm,smmu.yaml | 300 +++++++++++++++++++++ Documentation/devicetree/bindings/iommu/iommu.txt | 206 ++++++++++++++ .../devicetree/bindings/iommu/mediatek,iommu.yaml | 218 +++++++++++++++ .../devicetree/bindings/iommu/msm,iommu-v0.txt | 64 +++++ .../bindings/iommu/nvidia,tegra30-smmu.txt | 21 ++ .../devicetree/bindings/iommu/qcom,iommu.txt | 121 +++++++++ .../bindings/iommu/renesas,ipmmu-vmsa.yaml | 121 +++++++++ .../devicetree/bindings/iommu/rockchip,iommu.yaml | 83 ++++++ .../devicetree/bindings/iommu/samsung,sysmmu.yaml | 99 +++++++ .../devicetree/bindings/iommu/sprd,iommu.yaml | 57 ++++ .../devicetree/bindings/iommu/ti,omap-iommu.txt | 59 ++++ .../devicetree/bindings/iommu/xen,grant-dma.yaml | 39 +++ 16 files changed, 1680 insertions(+) create mode 100644 Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml create mode 100644 Documentation/devicetree/bindings/iommu/apple,dart.yaml create mode 100644 Documentation/devicetree/bindings/iommu/apple,sart.yaml create mode 100644 Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml create mode 100644 Documentation/devicetree/bindings/iommu/arm,smmu.yaml create mode 100644 Documentation/devicetree/bindings/iommu/iommu.txt create mode 100644 Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml create mode 100644 Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt create mode 100644 Documentation/devicetree/bindings/iommu/nvidia,tegra30-smmu.txt create mode 100644 Documentation/devicetree/bindings/iommu/qcom,iommu.txt create mode 100644 Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml create mode 100644 Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml create mode 100644 Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml create mode 100644 Documentation/devicetree/bindings/iommu/sprd,iommu.yaml create mode 100644 Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt create mode 100644 Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml (limited to 'Documentation/devicetree/bindings/iommu') diff --git a/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml b/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml new file mode 100644 index 000000000..e20016f12 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/allwinner,sun50i-h6-iommu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner H6 IOMMU + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + "#iommu-cells": + const: 1 + description: + The content of the cell is the master ID. + + compatible: + const: allwinner,sun50i-h6-iommu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - "#iommu-cells" + - compatible + - reg + - interrupts + - clocks + - resets + +additionalProperties: false + +examples: + - | + #include + #include + + #include + #include + + iommu: iommu@30f0000 { + compatible = "allwinner,sun50i-h6-iommu"; + reg = <0x030f0000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_BUS_IOMMU>; + resets = <&ccu RST_BUS_IOMMU>; + #iommu-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/iommu/apple,dart.yaml b/Documentation/devicetree/bindings/iommu/apple,dart.yaml new file mode 100644 index 000000000..82ad669fe --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/apple,dart.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/apple,dart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple DART IOMMU + +maintainers: + - Sven Peter + +description: |+ + Apple SoCs may contain an implementation of their Device Address + Resolution Table which provides a mandatory layer of address + translations for various masters. + + Each DART instance is capable of handling up to 16 different streams + with individual pagetables and page-level read/write protection flags. + + This DART IOMMU also raises interrupts in response to various + fault conditions. + +properties: + compatible: + const: apple,t8103-dart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: + Reference to the gate clock phandle if required for this IOMMU. + Optional since not all IOMMUs are attached to a clock gate. + + '#iommu-cells': + const: 1 + description: + Has to be one. The single cell describes the stream id emitted by + a master to the IOMMU. + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - '#iommu-cells' + - interrupts + +additionalProperties: false + +examples: + - |+ + dart1: iommu@82f80000 { + compatible = "apple,t8103-dart"; + reg = <0x82f80000 0x4000>; + interrupts = <1 781 4>; + #iommu-cells = <1>; + }; + + master1 { + iommus = <&dart1 0>; + }; + + - |+ + dart2a: iommu@82f00000 { + compatible = "apple,t8103-dart"; + reg = <0x82f00000 0x4000>; + interrupts = <1 781 4>; + #iommu-cells = <1>; + }; + dart2b: iommu@82f80000 { + compatible = "apple,t8103-dart"; + reg = <0x82f80000 0x4000>; + interrupts = <1 781 4>; + #iommu-cells = <1>; + }; + + master2 { + iommus = <&dart2a 0>, <&dart2b 1>; + }; diff --git a/Documentation/devicetree/bindings/iommu/apple,sart.yaml b/Documentation/devicetree/bindings/iommu/apple,sart.yaml new file mode 100644 index 000000000..1524fa309 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/apple,sart.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/apple,sart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple SART DMA address filter + +maintainers: + - Sven Peter + +description: + Apple SART is a simple address filter for DMA transactions. Regions of + physical memory must be added to the SART's allow list before any + DMA can target these. Unlike a proper IOMMU no remapping can be done and + special support in the consumer driver is required since not all DMA + transactions of a single device are subject to SART filtering. + + SART1 has first been used since at least the A11 (iPhone 8 and iPhone X) + and allows 36 bit of physical address space and filter entries with sizes + up to 24 bit. + + SART2, first seen in A14 and M1, allows 36 bit of physical address space + and filter entry size up to 36 bit. + + SART3, first seen in M1 Pro/Max, extends both the address space and filter + entry size to 42 bit. + +properties: + compatible: + enum: + - apple,t6000-sart + - apple,t8103-sart + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + iommu@7bc50000 { + compatible = "apple,t8103-sart"; + reg = <0x7bc50000 0x4000>; + }; diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml new file mode 100644 index 000000000..75fcf4cb5 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/arm,smmu-v3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM SMMUv3 Architecture Implementation + +maintainers: + - Will Deacon + - Robin Murphy + +description: |+ + The SMMUv3 architecture is a significant departure from previous + revisions, replacing the MMIO register interface with in-memory command + and event queues and adding support for the ATS and PRI components of + the PCIe specification. + +properties: + $nodename: + pattern: "^iommu@[0-9a-f]*" + compatible: + const: arm,smmu-v3 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 4 + + interrupt-names: + oneOf: + - const: combined + description: + The combined interrupt is optional, and should only be provided if the + hardware supports just a single, combined interrupt line. + If provided, then the combined interrupt will be used in preference to + any others. + - minItems: 1 + items: + enum: + - eventq # Event Queue not empty + - gerror # Global Error activated + - cmdq-sync # CMD_SYNC complete + - priq # PRI Queue not empty + + '#iommu-cells': + const: 1 + + dma-coherent: + description: | + Present if page table walks made by the SMMU are cache coherent with the + CPU. + + NOTE: this only applies to the SMMU itself, not masters connected + upstream of the SMMU. + + msi-parent: true + + hisilicon,broken-prefetch-cmd: + type: boolean + description: Avoid sending CMD_PREFETCH_* commands to the SMMU. + + cavium,cn9900-broken-page1-regspace: + type: boolean + description: + Replaces all page 1 offsets used for EVTQ_PROD/CONS, PRIQ_PROD/CONS + register access with page 0 offsets. Set for Cavium ThunderX2 silicon that + doesn't support SMMU page1 register space. + +required: + - compatible + - reg + - '#iommu-cells' + +additionalProperties: false + +examples: + - |+ + #include + #include + + iommu@2b400000 { + compatible = "arm,smmu-v3"; + reg = <0x2b400000 0x20000>; + interrupts = , + , + , + ; + interrupt-names = "eventq", "gerror", "priq", "cmdq-sync"; + dma-coherent; + #iommu-cells = <1>; + msi-parent = <&its 0xff0000>; + }; diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml new file mode 100644 index 000000000..9066e6df1 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -0,0 +1,300 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/arm,smmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM System MMU Architecture Implementation + +maintainers: + - Will Deacon + - Robin Murphy + +description: |+ + ARM SoCs may contain an implementation of the ARM System Memory + Management Unit Architecture, which can be used to provide 1 or 2 stages + of address translation to bus masters external to the CPU. + + The SMMU may also raise interrupts in response to various fault + conditions. + +properties: + $nodename: + pattern: "^iommu@[0-9a-f]*" + compatible: + oneOf: + - description: Qcom SoCs implementing "arm,smmu-v2" + items: + - enum: + - qcom,msm8996-smmu-v2 + - qcom,msm8998-smmu-v2 + - const: qcom,smmu-v2 + + - description: Qcom SoCs implementing "arm,mmu-500" + items: + - enum: + - qcom,qcm2290-smmu-500 + - qcom,sc7180-smmu-500 + - qcom,sc7280-smmu-500 + - qcom,sc8180x-smmu-500 + - qcom,sc8280xp-smmu-500 + - qcom,sdm845-smmu-500 + - qcom,sdx55-smmu-500 + - qcom,sdx65-smmu-500 + - qcom,sm6350-smmu-500 + - qcom,sm6375-smmu-500 + - qcom,sm8150-smmu-500 + - qcom,sm8250-smmu-500 + - qcom,sm8350-smmu-500 + - qcom,sm8450-smmu-500 + - const: arm,mmu-500 + - description: Qcom Adreno GPUs implementing "arm,smmu-v2" + items: + - enum: + - qcom,sc7180-smmu-v2 + - qcom,sdm845-smmu-v2 + - const: qcom,adreno-smmu + - const: qcom,smmu-v2 + - description: Marvell SoCs implementing "arm,mmu-500" + items: + - const: marvell,ap806-smmu-500 + - const: arm,mmu-500 + - description: NVIDIA SoCs that require memory controller interaction + and may program multiple ARM MMU-500s identically with the memory + controller interleaving translations between multiple instances + for improved performance. + items: + - enum: + - nvidia,tegra186-smmu + - nvidia,tegra194-smmu + - nvidia,tegra234-smmu + - const: nvidia,smmu-500 + - items: + - const: arm,mmu-500 + - const: arm,smmu-v2 + - items: + - enum: + - arm,mmu-400 + - arm,mmu-401 + - const: arm,smmu-v1 + - enum: + - arm,smmu-v1 + - arm,smmu-v2 + - arm,mmu-400 + - arm,mmu-401 + - arm,mmu-500 + - cavium,smmu-v2 + + reg: + minItems: 1 + maxItems: 2 + + '#global-interrupts': + description: The number of global interrupts exposed by the device. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 260 # 2 secure, 2 non-secure, and up to 256 perf counters + + '#iommu-cells': + enum: [ 1, 2 ] + description: | + See Documentation/devicetree/bindings/iommu/iommu.txt for details. With a + value of 1, each IOMMU specifier represents a distinct stream ID emitted + by that device into the relevant SMMU. + + SMMUs with stream matching support and complex masters may use a value of + 2, where the second cell of the IOMMU specifier represents an SMR mask to + combine with the ID in the first cell. Care must be taken to ensure the + set of matched IDs does not result in conflicts. + + interrupts: + minItems: 1 + maxItems: 388 # 260 plus 128 contexts + description: | + Interrupt list, with the first #global-interrupts entries corresponding to + the global interrupts and any following entries corresponding to context + interrupts, specified in order of their indexing by the SMMU. + + For SMMUv2 implementations, there must be exactly one interrupt per + context bank. In the case of a single, combined interrupt, it must be + listed multiple times. + + dma-coherent: + description: | + Present if page table walks made by the SMMU are cache coherent with the + CPU. + + NOTE: this only applies to the SMMU itself, not masters connected + upstream of the SMMU. + + calxeda,smmu-secure-config-access: + type: boolean + description: + Enable proper handling of buggy implementations that always use secure + access to SMMU configuration registers. In this case non-secure aliases of + secure registers have to be used during SMMU configuration. + + stream-match-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + For SMMUs supporting stream matching and using #iommu-cells = <1>, + specifies a mask of bits to ignore when matching stream IDs (e.g. this may + be programmed into the SMRn.MASK field of every stream match register + used). For cases where it is desirable to ignore some portion of every + Stream ID (e.g. for certain MMU-500 configurations given globally unique + input IDs). This property is not valid for SMMUs using stream indexing, or + using stream matching with #iommu-cells = <2>, and may be ignored if + present in such cases. + + clock-names: + items: + - const: bus + - const: iface + + clocks: + items: + - description: bus clock required for downstream bus access and for the + smmu ptw + - description: interface clock required to access smmu's registers + through the TCU's programming interface. + + power-domains: + maxItems: 1 + + nvidia,memory-controller: + description: | + A phandle to the memory controller on NVIDIA Tegra186 and later SoCs. + The memory controller needs to be programmed with a mapping of memory + client IDs to ARM SMMU stream IDs. + + If this property is absent, the mapping programmed by early firmware + will be used and it is not guaranteed that IOMMU translations will be + enabled for any given device. + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + - '#global-interrupts' + - '#iommu-cells' + - interrupts + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra186-smmu + - nvidia,tegra194-smmu + - nvidia,tegra234-smmu + then: + properties: + reg: + minItems: 1 + maxItems: 2 + + # The reference to the memory controller is required to ensure that the + # memory client to stream ID mapping can be done synchronously with the + # IOMMU attachment. + required: + - nvidia,memory-controller + else: + properties: + reg: + maxItems: 1 + +examples: + - |+ + /* SMMU with stream matching or stream indexing */ + smmu1: iommu@ba5e0000 { + compatible = "arm,smmu-v1"; + reg = <0xba5e0000 0x10000>; + #global-interrupts = <2>; + interrupts = <0 32 4>, + <0 33 4>, + <0 34 4>, /* This is the first context interrupt */ + <0 35 4>, + <0 36 4>, + <0 37 4>; + #iommu-cells = <1>; + }; + + /* device with two stream IDs, 0 and 7 */ + master1 { + iommus = <&smmu1 0>, + <&smmu1 7>; + }; + + + /* SMMU with stream matching */ + smmu2: iommu@ba5f0000 { + compatible = "arm,smmu-v1"; + reg = <0xba5f0000 0x10000>; + #global-interrupts = <2>; + interrupts = <0 38 4>, + <0 39 4>, + <0 40 4>, /* This is the first context interrupt */ + <0 41 4>, + <0 42 4>, + <0 43 4>; + #iommu-cells = <2>; + }; + + /* device with stream IDs 0 and 7 */ + master2 { + iommus = <&smmu2 0 0>, + <&smmu2 7 0>; + }; + + /* device with stream IDs 1, 17, 33 and 49 */ + master3 { + iommus = <&smmu2 1 0x30>; + }; + + + /* ARM MMU-500 with 10-bit stream ID input configuration */ + smmu3: iommu@ba600000 { + compatible = "arm,mmu-500", "arm,smmu-v2"; + reg = <0xba600000 0x10000>; + #global-interrupts = <2>; + interrupts = <0 44 4>, + <0 45 4>, + <0 46 4>, /* This is the first context interrupt */ + <0 47 4>, + <0 48 4>, + <0 49 4>; + #iommu-cells = <1>; + /* always ignore appended 5-bit TBU number */ + stream-match-mask = <0x7c00>; + }; + + bus { + /* bus whose child devices emit one unique 10-bit stream + ID each, but may master through multiple SMMU TBUs */ + iommu-map = <0 &smmu3 0 0x400>; + + + }; + + - |+ + /* Qcom's arm,smmu-v2 implementation */ + #include + #include + smmu4: iommu@d00000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0xd00000 0x10000>; + + #global-interrupts = <1>; + interrupts = , + , + ; + #iommu-cells = <1>; + power-domains = <&mmcc 0>; + + clocks = <&mmcc 123>, + <&mmcc 124>; + clock-names = "bus", "iface"; + }; diff --git a/Documentation/devicetree/bindings/iommu/iommu.txt b/Documentation/devicetree/bindings/iommu/iommu.txt new file mode 100644 index 000000000..26ba9e530 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/iommu.txt @@ -0,0 +1,206 @@ +This document describes the generic device tree binding for IOMMUs and their +master(s). + + +IOMMU device node: +================== + +An IOMMU can provide the following services: + +* Remap address space to allow devices to access physical memory ranges that + they otherwise wouldn't be capable of accessing. + + Example: 32-bit DMA to 64-bit physical addresses + +* Implement scatter-gather at page level granularity so that the device does + not have to. + +* Provide system protection against "rogue" DMA by forcing all accesses to go + through the IOMMU and faulting when encountering accesses to unmapped + address regions. + +* Provide address space isolation between multiple contexts. + + Example: Virtualization + +Device nodes compatible with this binding represent hardware with some of the +above capabilities. + +IOMMUs can be single-master or multiple-master. Single-master IOMMU devices +typically have a fixed association to the master device, whereas multiple- +master IOMMU devices can translate accesses from more than one master. + +The device tree node of the IOMMU device's parent bus must contain a valid +"dma-ranges" property that describes how the physical address space of the +IOMMU maps to memory. An empty "dma-ranges" property means that there is a +1:1 mapping from IOMMU to memory. + +Required properties: +-------------------- +- #iommu-cells: The number of cells in an IOMMU specifier needed to encode an + address. + +The meaning of the IOMMU specifier is defined by the device tree binding of +the specific IOMMU. Below are a few examples of typical use-cases: + +- #iommu-cells = <0>: Single master IOMMU devices are not configurable and + therefore no additional information needs to be encoded in the specifier. + This may also apply to multiple master IOMMU devices that do not allow the + association of masters to be configured. Note that an IOMMU can by design + be multi-master yet only expose a single master in a given configuration. + In such cases the number of cells will usually be 1 as in the next case. +- #iommu-cells = <1>: Multiple master IOMMU devices may need to be configured + in order to enable translation for a given master. In such cases the single + address cell corresponds to the master device's ID. In some cases more than + one cell can be required to represent a single master ID. +- #iommu-cells = <4>: Some IOMMU devices allow the DMA window for masters to + be configured. The first cell of the address in this may contain the master + device's ID for example, while the second cell could contain the start of + the DMA window for the given device. The length of the DMA window is given + by the third and fourth cells. + +Note that these are merely examples and real-world use-cases may use different +definitions to represent their individual needs. Always refer to the specific +IOMMU binding for the exact meaning of the cells that make up the specifier. + + +IOMMU master node: +================== + +Devices that access memory through an IOMMU are called masters. A device can +have multiple master interfaces (to one or more IOMMU devices). + +Required properties: +-------------------- +- iommus: A list of phandle and IOMMU specifier pairs that describe the IOMMU + master interfaces of the device. One entry in the list describes one master + interface of the device. + +When an "iommus" property is specified in a device tree node, the IOMMU will +be used for address translation. If a "dma-ranges" property exists in the +device's parent node it will be ignored. An exception to this rule is if the +referenced IOMMU is disabled, in which case the "dma-ranges" property of the +parent shall take effect. Note that merely disabling a device tree node does +not guarantee that the IOMMU is really disabled since the hardware may not +have a means to turn off translation. But it is invalid in such cases to +disable the IOMMU's device tree node in the first place because it would +prevent any driver from properly setting up the translations. + +Optional properties: +-------------------- +- pasid-num-bits: Some masters support multiple address spaces for DMA, by + tagging DMA transactions with an address space identifier. By default, + this is 0, which means that the device only has one address space. + +- dma-can-stall: When present, the master can wait for a transaction to + complete for an indefinite amount of time. Upon translation fault some + IOMMUs, instead of aborting the translation immediately, may first + notify the driver and keep the transaction in flight. This allows the OS + to inspect the fault and, for example, make physical pages resident + before updating the mappings and completing the transaction. Such IOMMU + accepts a limited number of simultaneous stalled transactions before + having to either put back-pressure on the master, or abort new faulting + transactions. + + Firmware has to opt-in stalling, because most buses and masters don't + support it. In particular it isn't compatible with PCI, where + transactions have to complete before a time limit. More generally it + won't work in systems and masters that haven't been designed for + stalling. For example the OS, in order to handle a stalled transaction, + may attempt to retrieve pages from secondary storage in a stalled + domain, leading to a deadlock. + + +Notes: +====== + +One possible extension to the above is to use an "iommus" property along with +a "dma-ranges" property in a bus device node (such as PCI host bridges). This +can be useful to describe how children on the bus relate to the IOMMU if they +are not explicitly listed in the device tree (e.g. PCI devices). However, the +requirements of that use-case haven't been fully determined yet. Implementing +this is therefore not recommended without further discussion and extension of +this binding. + + +Examples: +========= + +Single-master IOMMU: +-------------------- + + iommu { + #iommu-cells = <0>; + }; + + master { + iommus = <&{/iommu}>; + }; + +Multiple-master IOMMU with fixed associations: +---------------------------------------------- + + /* multiple-master IOMMU */ + iommu { + /* + * Masters are statically associated with this IOMMU and share + * the same address translations because the IOMMU does not + * have sufficient information to distinguish between masters. + * + * Consequently address translation is always on or off for + * all masters at any given point in time. + */ + #iommu-cells = <0>; + }; + + /* static association with IOMMU */ + master@1 { + reg = <1>; + iommus = <&{/iommu}>; + }; + + /* static association with IOMMU */ + master@2 { + reg = <2>; + iommus = <&{/iommu}>; + }; + +Multiple-master IOMMU: +---------------------- + + iommu { + /* the specifier represents the ID of the master */ + #iommu-cells = <1>; + }; + + master@1 { + /* device has master ID 42 in the IOMMU */ + iommus = <&{/iommu} 42>; + }; + + master@2 { + /* device has master IDs 23 and 24 in the IOMMU */ + iommus = <&{/iommu} 23>, <&{/iommu} 24>; + }; + +Multiple-master IOMMU with configurable DMA window: +--------------------------------------------------- + + / { + iommu { + /* + * One cell for the master ID and one cell for the + * address of the DMA window. The length of the DMA + * window is encoded in two cells. + * + * The DMA window is the range addressable by the + * master (i.e. the I/O virtual address space). + */ + #iommu-cells = <4>; + }; + + master { + /* master ID 42, 4 GiB DMA window starting at 0 */ + iommus = <&{/iommu} 42 0 0x1 0x0>; + }; + }; diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml new file mode 100644 index 000000000..839e3be0b --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml @@ -0,0 +1,218 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/mediatek,iommu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek IOMMU Architecture Implementation + +maintainers: + - Yong Wu + +description: |+ + Some MediaTek SOCs contain a Multimedia Memory Management Unit (M4U), and + this M4U have two generations of HW architecture. Generation one uses flat + pagetable, and only supports 4K size page mapping. Generation two uses the + ARM Short-Descriptor translation table format for address translation. + + About the M4U Hardware Block Diagram, please check below: + + EMI (External Memory Interface) + | + m4u (Multimedia Memory Management Unit) + | + +--------+ + | | + gals0-rx gals1-rx (Global Async Local Sync rx) + | | + | | + gals0-tx gals1-tx (Global Async Local Sync tx) + | | Some SoCs may have GALS. + +--------+ + | + SMI Common(Smart Multimedia Interface Common) + | + +----------------+------- + | | + | gals-rx There may be GALS in some larbs. + | | + | | + | gals-tx + | | + SMI larb0 SMI larb1 ... SoCs have several SMI local arbiter(larb). + (display) (vdec) + | | + | | + +-----+-----+ +----+----+ + | | | | | | + | | |... | | | ... There are different ports in each larb. + | | | | | | + OVL0 RDMA0 WDMA0 MC PP VLD + + As above, The Multimedia HW will go through SMI and M4U while it + access EMI. SMI is a bridge between m4u and the Multimedia HW. It contain + smi local arbiter and smi common. It will control whether the Multimedia + HW should go though the m4u for translation or bypass it and talk + directly with EMI. And also SMI help control the power domain and clocks for + each local arbiter. + + Normally we specify a local arbiter(larb) for each multimedia HW + like display, video decode, and camera. And there are different ports + in each larb. Take a example, There are many ports like MC, PP, VLD in the + video decode local arbiter, all these ports are according to the video HW. + + In some SoCs, there may be a GALS(Global Async Local Sync) module between + smi-common and m4u, and additional GALS module between smi-larb and + smi-common. GALS can been seen as a "asynchronous fifo" which could help + synchronize for the modules in different clock frequency. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt2701-m4u # generation one + - mediatek,mt2712-m4u # generation two + - mediatek,mt6779-m4u # generation two + - mediatek,mt6795-m4u # generation two + - mediatek,mt8167-m4u # generation two + - mediatek,mt8173-m4u # generation two + - mediatek,mt8183-m4u # generation two + - mediatek,mt8186-iommu-mm # generation two + - mediatek,mt8192-m4u # generation two + - mediatek,mt8195-iommu-vdo # generation two + - mediatek,mt8195-iommu-vpp # generation two + - mediatek,mt8195-iommu-infra # generation two + + - description: mt7623 generation one + items: + - const: mediatek,mt7623-m4u + - const: mediatek,mt2701-m4u + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: bclk is the block clock. + + clock-names: + items: + - const: bclk + + mediatek,infracfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle to the mediatek infracfg syscon + + mediatek,larbs: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 32 + items: + maxItems: 1 + description: | + List of phandle to the local arbiters in the current Socs. + Refer to bindings/memory-controllers/mediatek,smi-larb.yaml. It must sort + according to the local arbiter index, like larb0, larb1, larb2... + + '#iommu-cells': + const: 1 + description: | + This is the mtk_m4u_id according to the HW. Specifies the mtk_m4u_id as + defined in + dt-binding/memory/mt2701-larb-port.h for mt2701 and mt7623, + dt-binding/memory/mt2712-larb-port.h for mt2712, + dt-binding/memory/mt6779-larb-port.h for mt6779, + dt-binding/memory/mt6795-larb-port.h for mt6795, + dt-binding/memory/mt8167-larb-port.h for mt8167, + dt-binding/memory/mt8173-larb-port.h for mt8173, + dt-binding/memory/mt8183-larb-port.h for mt8183, + dt-binding/memory/mt8186-memory-port.h for mt8186, + dt-binding/memory/mt8192-larb-port.h for mt8192. + dt-binding/memory/mt8195-memory-port.h for mt8195. + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - '#iommu-cells' + +allOf: + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt2701-m4u + - mediatek,mt2712-m4u + - mediatek,mt6795-m4u + - mediatek,mt8173-m4u + - mediatek,mt8186-iommu-mm + - mediatek,mt8192-m4u + - mediatek,mt8195-iommu-vdo + - mediatek,mt8195-iommu-vpp + + then: + required: + - clocks + + - if: + properties: + compatible: + enum: + - mediatek,mt8186-iommu-mm + - mediatek,mt8192-m4u + - mediatek,mt8195-iommu-vdo + - mediatek,mt8195-iommu-vpp + + then: + required: + - power-domains + + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt2712-m4u + - mediatek,mt6795-m4u + - mediatek,mt8173-m4u + + then: + required: + - mediatek,infracfg + + - if: # The IOMMUs don't have larbs. + not: + properties: + compatible: + contains: + const: mediatek,mt8195-iommu-infra + + then: + required: + - mediatek,larbs + +additionalProperties: false + +examples: + - | + #include + #include + + iommu: iommu@10205000 { + compatible = "mediatek,mt8173-m4u"; + reg = <0x10205000 0x1000>; + interrupts = ; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + mediatek,infracfg = <&infracfg>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, + <&larb3>, <&larb4>, <&larb5>; + #iommu-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt b/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt new file mode 100644 index 000000000..20236385f --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt @@ -0,0 +1,64 @@ +* QCOM IOMMU + +The MSM IOMMU is an implementation compatible with the ARM VMSA short +descriptor page tables. It provides address translation for bus masters outside +of the CPU, each connected to the IOMMU through a port called micro-TLB. + +Required Properties: + + - compatible: Must contain "qcom,apq8064-iommu". + - reg: Base address and size of the IOMMU registers. + - interrupts: Specifiers for the MMU fault interrupts. For instances that + support secure mode two interrupts must be specified, for non-secure and + secure mode, in that order. For instances that don't support secure mode a + single interrupt must be specified. + - #iommu-cells: The number of cells needed to specify the stream id. This + is always 1. + - qcom,ncb: The total number of context banks in the IOMMU. + - clocks : List of clocks to be used during SMMU register access. See + Documentation/devicetree/bindings/clock/clock-bindings.txt + for information about the format. For each clock specified + here, there must be a corresponding entry in clock-names + (see below). + + - clock-names : List of clock names corresponding to the clocks specified in + the "clocks" property (above). + Should be "smmu_pclk" for specifying the interface clock + required for iommu's register accesses. + Should be "smmu_clk" for specifying the functional clock + required by iommu for bus accesses. + +Each bus master connected to an IOMMU must reference the IOMMU in its device +node with the following property: + + - iommus: A reference to the IOMMU in multiple cells. The first cell is a + phandle to the IOMMU and the second cell is the stream id. + A single master device can be connected to more than one iommu + and multiple contexts in each of the iommu. So multiple entries + are required to list all the iommus and the stream ids that the + master is connected to. + +Example: mdp iommu and its bus master + + mdp_port0: iommu@7500000 { + compatible = "qcom,apq8064-iommu"; + #iommu-cells = <1>; + clock-names = + "smmu_pclk", + "smmu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc MDP_AXI_CLK>; + reg = <0x07500000 0x100000>; + interrupts = + , + ; + qcom,ncb = <2>; + }; + + mdp: qcom,mdp@5100000 { + compatible = "qcom,mdp"; + ... + iommus = <&mdp_port0 0 + &mdp_port0 2>; + }; diff --git a/Documentation/devicetree/bindings/iommu/nvidia,tegra30-smmu.txt b/Documentation/devicetree/bindings/iommu/nvidia,tegra30-smmu.txt new file mode 100644 index 000000000..89fb5434b --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/nvidia,tegra30-smmu.txt @@ -0,0 +1,21 @@ +NVIDIA Tegra 30 IOMMU H/W, SMMU (System Memory Management Unit) + +Required properties: +- compatible : "nvidia,tegra30-smmu" +- reg : Should contain 3 register banks(address and length) for each + of the SMMU register blocks. +- interrupts : Should contain MC General interrupt. +- nvidia,#asids : # of ASIDs +- dma-window : IOVA start address and length. +- nvidia,ahb : phandle to the ahb bus connected to SMMU. + +Example: + smmu { + compatible = "nvidia,tegra30-smmu"; + reg = <0x7000f010 0x02c + 0x7000f1f0 0x010 + 0x7000f228 0x05c>; + nvidia,#asids = <4>; /* # of ASIDs */ + dma-window = <0 0x40000000>; /* IOVA start & length */ + nvidia,ahb = <&ahb>; + }; diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt new file mode 100644 index 000000000..059139abc --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt @@ -0,0 +1,121 @@ +* QCOM IOMMU v1 Implementation + +Qualcomm "B" family devices which are not compatible with arm-smmu have +a similar looking IOMMU but without access to the global register space, +and optionally requiring additional configuration to route context irqs +to non-secure vs secure interrupt line. + +** Required properties: + +- compatible : Should be one of: + + "qcom,msm8916-iommu" + + Followed by "qcom,msm-iommu-v1". + +- clock-names : Should be a pair of "iface" (required for IOMMUs + register group access) and "bus" (required for + the IOMMUs underlying bus access). + +- clocks : Phandles for respective clocks described by + clock-names. + +- #address-cells : must be 1. + +- #size-cells : must be 1. + +- #iommu-cells : Must be 1. Index identifies the context-bank #. + +- ranges : Base address and size of the iommu context banks. + +- qcom,iommu-secure-id : secure-id. + +- List of sub-nodes, one per translation context bank. Each sub-node + has the following required properties: + + - compatible : Should be one of: + - "qcom,msm-iommu-v1-ns" : non-secure context bank + - "qcom,msm-iommu-v1-sec" : secure context bank + - reg : Base address and size of context bank within the iommu + - interrupts : The context fault irq. + +** Optional properties: + +- reg : Base address and size of the SMMU local base, should + be only specified if the iommu requires configuration + for routing of context bank irq's to secure vs non- + secure lines. (Ie. if the iommu contains secure + context banks) + + +** Examples: + + apps_iommu: iommu@1e20000 { + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x1e20000 0x40000>; + reg = <0x1ef0000 0x3000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", "bus"; + qcom,iommu-secure-id = <17>; + + // mdp_0: + iommu-ctx@4000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x4000 0x1000>; + interrupts = ; + }; + + // venus_ns: + iommu-ctx@5000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x5000 0x1000>; + interrupts = ; + }; + }; + + gpu_iommu: iommu@1f08000 { + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x1f08000 0x10000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_GFX_TCU_CLK>; + clock-names = "iface", "bus"; + qcom,iommu-secure-id = <18>; + + // gfx3d_user: + iommu-ctx@1000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x1000 0x1000>; + interrupts = ; + }; + + // gfx3d_priv: + iommu-ctx@2000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x2000 0x1000>; + interrupts = ; + }; + }; + + ... + + venus: video-codec@1d00000 { + ... + iommus = <&apps_iommu 5>; + }; + + mdp: mdp@1a01000 { + ... + iommus = <&apps_iommu 4>; + }; + + gpu@1c00000 { + ... + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + }; diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml new file mode 100644 index 000000000..8854569ca --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/renesas,ipmmu-vmsa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas VMSA-Compatible IOMMU + +maintainers: + - Yoshihiro Shimoda + +description: + The IPMMU is an IOMMU implementation compatible with the ARM VMSA page tables. + It provides address translation for bus masters outside of the CPU, each + connected to the IPMMU through a port called micro-TLB. + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,ipmmu-r8a73a4 # R-Mobile APE6 + - renesas,ipmmu-r8a7742 # RZ/G1H + - renesas,ipmmu-r8a7743 # RZ/G1M + - renesas,ipmmu-r8a7744 # RZ/G1N + - renesas,ipmmu-r8a7745 # RZ/G1E + - renesas,ipmmu-r8a7790 # R-Car H2 + - renesas,ipmmu-r8a7791 # R-Car M2-W + - renesas,ipmmu-r8a7793 # R-Car M2-N + - renesas,ipmmu-r8a7794 # R-Car E2 + - const: renesas,ipmmu-vmsa # R-Mobile APE6 or R-Car Gen2 or RZ/G1 + - items: + - enum: + - renesas,ipmmu-r8a774a1 # RZ/G2M + - renesas,ipmmu-r8a774b1 # RZ/G2N + - renesas,ipmmu-r8a774c0 # RZ/G2E + - renesas,ipmmu-r8a774e1 # RZ/G2H + - renesas,ipmmu-r8a7795 # R-Car H3 + - renesas,ipmmu-r8a7796 # R-Car M3-W + - renesas,ipmmu-r8a77961 # R-Car M3-W+ + - renesas,ipmmu-r8a77965 # R-Car M3-N + - renesas,ipmmu-r8a77970 # R-Car V3M + - renesas,ipmmu-r8a77980 # R-Car V3H + - renesas,ipmmu-r8a77990 # R-Car E3 + - renesas,ipmmu-r8a77995 # R-Car D3 + - renesas,ipmmu-r8a779a0 # R-Car V3U + - items: + - enum: + - renesas,ipmmu-r8a779f0 # R-Car S4-8 + - const: renesas,rcar-gen4-ipmmu-vmsa # R-Car Gen4 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + description: + Specifiers for the MMU fault interrupts. Not required for cache IPMMUs. + items: + - description: non-secure mode + - description: secure mode if supported + + '#iommu-cells': + const: 1 + description: + The number of the micro-TLB that the device is connected to. + + power-domains: + maxItems: 1 + + renesas,ipmmu-main: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to main IPMMU + - description: the interrupt bit number associated with the particular + cache IPMMU device. The interrupt bit number needs to match the main + IPMMU IMSSTR register. Only used by cache IPMMU instances. + description: + Reference to the main IPMMU phandle plus 1 cell. The cell is + the interrupt bit number associated with the particular cache IPMMU + device. The interrupt bit number needs to match the main IPMMU IMSSTR + register. Only used by cache IPMMU instances. + +required: + - compatible + - reg + - '#iommu-cells' + +oneOf: + - required: + - interrupts + - required: + - renesas,ipmmu-main + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + not: + contains: + const: renesas,ipmmu-vmsa + then: + required: + - power-domains + +examples: + - | + #include + #include + #include + + ipmmu_mx: iommu@fe951000 { + compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; + reg = <0xfe951000 0x1000>; + interrupts = , + ; + #iommu-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml new file mode 100644 index 000000000..ba9124f72 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/rockchip,iommu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip IOMMU + +maintainers: + - Heiko Stuebner + +description: |+ + A Rockchip DRM iommu translates io virtual addresses to physical addresses for + its master device. Each slave device is bound to a single master device and + shares its clocks, power domain and irq. + + For information on assigning IOMMU controller to its peripheral devices, + see generic IOMMU bindings. + +properties: + compatible: + enum: + - rockchip,iommu + - rockchip,rk3568-iommu + + reg: + items: + - description: configuration registers for MMU instance 0 + - description: configuration registers for MMU instance 1 + minItems: 1 + + interrupts: + items: + - description: interruption for MMU instance 0 + - description: interruption for MMU instance 1 + minItems: 1 + + clocks: + items: + - description: Core clock + - description: Interface clock + + clock-names: + items: + - const: aclk + - const: iface + + "#iommu-cells": + const: 0 + + power-domains: + maxItems: 1 + + rockchip,disable-mmu-reset: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Do not use the mmu reset operation. + Some mmu instances may produce unexpected results + when the reset operation is used. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - "#iommu-cells" + +additionalProperties: false + +examples: + - | + #include + #include + + vopl_mmu: iommu@ff940300 { + compatible = "rockchip,iommu"; + reg = <0xff940300 0x100>; + interrupts = ; + clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml new file mode 100644 index 000000000..672a0beea --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/samsung,sysmmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos IOMMU H/W, System MMU (System Memory Management Unit) + +maintainers: + - Marek Szyprowski + +description: |+ + Samsung's Exynos architecture contains System MMUs that enables scattered + physical memory chunks visible as a contiguous region to DMA-capable peripheral + devices like MFC, FIMC, FIMD, GScaler, FIMC-IS and so forth. + + System MMU is an IOMMU and supports identical translation table format to + ARMv7 translation tables with minimum set of page properties including access + permissions, shareability and security protection. In addition, System MMU has + another capabilities like L2 TLB or block-fetch buffers to minimize translation + latency. + + System MMUs are in many to one relation with peripheral devices, i.e. single + peripheral device might have multiple System MMUs (usually one for each bus + master), but one System MMU can handle transactions from only one peripheral + device. The relation between a System MMU and the peripheral device needs to be + defined in device node of the peripheral device. + + MFC in all Exynos SoCs and FIMD, M2M Scalers and G2D in Exynos5420 has 2 System + MMUs. + * MFC has one System MMU on its left and right bus. + * FIMD in Exynos5420 has one System MMU for window 0 and 4, the other system MMU + for window 1, 2 and 3. + * M2M Scalers and G2D in Exynos5420 has one System MMU on the read channel and + the other System MMU on the write channel. + + For information on assigning System MMU controller to its peripheral devices, + see generic IOMMU bindings. + +properties: + compatible: + const: samsung,exynos-sysmmu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + oneOf: + - items: + - const: sysmmu + - items: + - const: sysmmu + - const: master + - items: + - const: aclk + - const: pclk + + "#iommu-cells": + const: 0 + + power-domains: + description: | + Required if the System MMU is needed to gate its power. + Please refer to the following document: + Documentation/devicetree/bindings/power/pd-samsung.yaml + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - "#iommu-cells" + +additionalProperties: false + +examples: + - | + #include + + sysmmu_gsc0: iommu@13e80000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E80000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL0>, + <&clock CLK_GSCL0>; + power-domains = <&pd_gsc>; + #iommu-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml b/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml new file mode 100644 index 000000000..7003e12f5 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2020 Unisoc Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/sprd,iommu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc IOMMU and Multi-media MMU + +maintainers: + - Chunyan Zhang + +properties: + compatible: + enum: + - sprd,iommu-v1 + + "#iommu-cells": + const: 0 + description: + Unisoc IOMMUs are all single-master IOMMU devices, therefore no + additional information needs to associate with its master device. + Please refer to the generic bindings document for more details, + Documentation/devicetree/bindings/iommu/iommu.txt + + reg: + maxItems: 1 + + clocks: + description: + Reference to a gate clock phandle, since access to some of IOMMUs are + controlled by gate clock, but this is not required. + +required: + - compatible + - reg + - "#iommu-cells" + +additionalProperties: false + +examples: + - | + iommu_disp: iommu@63000800 { + compatible = "sprd,iommu-v1"; + reg = <0x63000800 0x80>; + #iommu-cells = <0>; + }; + + - | + iommu_jpg: iommu@62300300 { + compatible = "sprd,iommu-v1"; + reg = <0x62300300 0x80>; + #iommu-cells = <0>; + clocks = <&mm_gate 1>; + }; + +... diff --git a/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt b/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt new file mode 100644 index 000000000..4bd10dd88 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt @@ -0,0 +1,59 @@ +OMAP2+ IOMMU + +Required properties: +- compatible : Should be one of, + "ti,omap2-iommu" for OMAP2/OMAP3 IOMMU instances + "ti,omap4-iommu" for OMAP4/OMAP5 IOMMU instances + "ti,dra7-dsp-iommu" for DRA7xx DSP IOMMU instances + "ti,dra7-iommu" for DRA7xx IOMMU instances +- ti,hwmods : Name of the hwmod associated with the IOMMU instance +- reg : Address space for the configuration registers +- interrupts : Interrupt specifier for the IOMMU instance +- #iommu-cells : Should be 0. OMAP IOMMUs are all "single-master" devices, + and needs no additional data in the pargs specifier. Please + also refer to the generic bindings document for more info + on this property, + Documentation/devicetree/bindings/iommu/iommu.txt + +Optional properties: +- ti,#tlb-entries : Number of entries in the translation look-aside buffer. + Should be either 8 or 32 (default: 32) +- ti,iommu-bus-err-back : Indicates the IOMMU instance supports throwing + back a bus error response on MMU faults. +- ti,syscon-mmuconfig : Should be a pair of the phandle to the DSP_SYSTEM + syscon node that contains the additional control + register for enabling the MMU, and the MMU instance + number (0-indexed) within the sub-system. This property + is required for DSP IOMMU instances on DRA7xx SoCs. The + instance number should be 0 for DSP MDMA MMUs and 1 for + DSP EDMA MMUs. + +Example: + /* OMAP3 ISP MMU */ + mmu_isp: mmu@480bd400 { + #iommu-cells = <0>; + compatible = "ti,omap2-iommu"; + reg = <0x480bd400 0x80>; + interrupts = <24>; + ti,hwmods = "mmu_isp"; + ti,#tlb-entries = <8>; + }; + + /* DRA74x DSP2 MMUs */ + mmu0_dsp2: mmu@41501000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x41501000 0x100>; + interrupts = ; + ti,hwmods = "mmu0_dsp2"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp2_system 0x0>; + }; + + mmu1_dsp2: mmu@41502000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x41502000 0x100>; + interrupts = ; + ti,hwmods = "mmu1_dsp2"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp2_system 0x1>; + }; diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml new file mode 100644 index 000000000..be1539d23 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xen specific IOMMU for virtualized devices (e.g. virtio) + +maintainers: + - Stefano Stabellini + +description: + The Xen IOMMU represents the Xen grant table interface. Grant mappings + are to be used with devices connected to the Xen IOMMU using the "iommus" + property, which also specifies the ID of the backend domain. + The binding is required to restrict memory access using Xen grant mappings. + +properties: + compatible: + const: xen,grant-dma + + '#iommu-cells': + const: 1 + description: + The single cell is the domid (domain ID) of the domain where the backend + is running. + +required: + - compatible + - "#iommu-cells" + +additionalProperties: false + +examples: + - | + iommu { + compatible = "xen,grant-dma"; + #iommu-cells = <1>; + }; -- cgit v1.2.3