From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- Documentation/devicetree/bindings/mfd/88pm860x.txt | 85 ++++ Documentation/devicetree/bindings/mfd/act8945a.txt | 82 ++++ .../devicetree/bindings/mfd/actions,atc260x.yaml | 183 ++++++++ .../bindings/mfd/allwinner,sun4i-a10-ts.yaml | 76 +++ .../bindings/mfd/allwinner,sun6i-a31-prcm.yaml | 259 ++++++++++ .../bindings/mfd/allwinner,sun8i-a23-prcm.yaml | 210 +++++++++ .../devicetree/bindings/mfd/altera-a10sr.txt | 56 +++ Documentation/devicetree/bindings/mfd/as3711.txt | 73 +++ Documentation/devicetree/bindings/mfd/as3722.txt | 214 +++++++++ .../bindings/mfd/aspeed,ast2x00-scu.yaml | 110 +++++ .../devicetree/bindings/mfd/aspeed-gfx.txt | 17 + .../devicetree/bindings/mfd/aspeed-lpc.yaml | 199 ++++++++ .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 +++ .../devicetree/bindings/mfd/atmel-gpbr.txt | 17 + .../devicetree/bindings/mfd/atmel-hlcdc.txt | 55 +++ .../devicetree/bindings/mfd/atmel-matrix.txt | 25 + .../devicetree/bindings/mfd/atmel-smc.txt | 21 + Documentation/devicetree/bindings/mfd/bfticu.txt | 24 + .../devicetree/bindings/mfd/brcm,bcm59056.txt | 39 ++ .../bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml | 177 +++++++ .../bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml | 194 ++++++++ .../bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml | 162 +++++++ .../bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml | 130 +++++ .../bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml | 236 ++++++++++ .../bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml | 246 ++++++++++ .../devicetree/bindings/mfd/brcm,cru.yaml | 108 +++++ .../devicetree/bindings/mfd/brcm,iproc-cdru.txt | 16 + .../devicetree/bindings/mfd/brcm,iproc-mhb.txt | 18 + .../devicetree/bindings/mfd/brcm,misc.yaml | 60 +++ .../devicetree/bindings/mfd/brcm,twd.yaml | 61 +++ .../bindings/mfd/canaan,k210-sysctl.yaml | 109 +++++ .../devicetree/bindings/mfd/cirrus,lochnagar.yaml | 365 ++++++++++++++ .../devicetree/bindings/mfd/cirrus,madera.yaml | 297 ++++++++++++ .../devicetree/bindings/mfd/da9052-i2c.txt | 67 +++ Documentation/devicetree/bindings/mfd/da9055.txt | 70 +++ Documentation/devicetree/bindings/mfd/da9062.txt | 123 +++++ Documentation/devicetree/bindings/mfd/da9150.txt | 60 +++ .../devicetree/bindings/mfd/delta,tn48m-cpld.yaml | 90 ++++ .../devicetree/bindings/mfd/dlg,da9063.yaml | 133 ++++++ .../devicetree/bindings/mfd/ene-kb3930.yaml | 55 +++ .../devicetree/bindings/mfd/ene-kb930.yaml | 65 +++ .../devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml | 192 ++++++++ .../devicetree/bindings/mfd/fsl-imx25-tsadc.txt | 47 ++ .../devicetree/bindings/mfd/gateworks-gsc.yaml | 203 ++++++++ .../devicetree/bindings/mfd/google,cros-ec.yaml | 225 +++++++++ Documentation/devicetree/bindings/mfd/hi6421.txt | 40 ++ .../bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml | 137 ++++++ .../devicetree/bindings/mfd/hisilicon,hi655x.txt | 33 ++ Documentation/devicetree/bindings/mfd/iqs62x.yaml | 179 +++++++ .../devicetree/bindings/mfd/khadas,mcu.yaml | 44 ++ .../devicetree/bindings/mfd/kontron,sl28cpld.yaml | 153 ++++++ Documentation/devicetree/bindings/mfd/lp3943.txt | 33 ++ Documentation/devicetree/bindings/mfd/lp873x.txt | 67 +++ Documentation/devicetree/bindings/mfd/max77620.txt | 162 +++++++ .../devicetree/bindings/mfd/max77650.yaml | 151 ++++++ Documentation/devicetree/bindings/mfd/max8925.txt | 64 +++ Documentation/devicetree/bindings/mfd/max8998.txt | 125 +++++ .../devicetree/bindings/mfd/maxim,max14577.yaml | 196 ++++++++ .../devicetree/bindings/mfd/maxim,max77686.yaml | 132 ++++++ .../devicetree/bindings/mfd/maxim,max77693.yaml | 143 ++++++ .../devicetree/bindings/mfd/maxim,max77714.yaml | 68 +++ .../devicetree/bindings/mfd/maxim,max77802.yaml | 194 ++++++++ .../devicetree/bindings/mfd/maxim,max77843.yaml | 145 ++++++ Documentation/devicetree/bindings/mfd/mc13xxx.txt | 156 ++++++ .../devicetree/bindings/mfd/mediatek,mt6360.yaml | 256 ++++++++++ .../devicetree/bindings/mfd/mediatek,mt6370.yaml | 280 +++++++++++ .../bindings/mfd/mediatek,mt8195-scpsys.yaml | 68 +++ Documentation/devicetree/bindings/mfd/mfd.txt | 51 ++ .../devicetree/bindings/mfd/motorola-cpcap.txt | 72 +++ .../devicetree/bindings/mfd/mps,mp2629.yaml | 64 +++ .../devicetree/bindings/mfd/mscc,ocelot.yaml | 160 +++++++ Documentation/devicetree/bindings/mfd/mt6397.txt | 110 +++++ .../devicetree/bindings/mfd/mxs-lradc.txt | 45 ++ .../devicetree/bindings/mfd/netronix,ntxec.yaml | 76 +++ .../devicetree/bindings/mfd/omap-usb-host.txt | 103 ++++ .../devicetree/bindings/mfd/omap-usb-tll.txt | 27 ++ Documentation/devicetree/bindings/mfd/palmas.txt | 52 ++ .../devicetree/bindings/mfd/qcom,pm8008.yaml | 128 +++++ .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 296 ++++++++++++ .../devicetree/bindings/mfd/qcom,tcsr.yaml | 54 +++ .../devicetree/bindings/mfd/qcom-pm8xxx.yaml | 55 +++ Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 283 +++++++++++ Documentation/devicetree/bindings/mfd/qriox.txt | 17 + Documentation/devicetree/bindings/mfd/retu.txt | 24 + .../devicetree/bindings/mfd/richtek,rt4831.yaml | 90 ++++ .../devicetree/bindings/mfd/richtek,rt5120.yaml | 178 +++++++ .../devicetree/bindings/mfd/ricoh,rn5t618.yaml | 111 +++++ .../devicetree/bindings/mfd/rockchip,rk805.yaml | 219 +++++++++ .../devicetree/bindings/mfd/rockchip,rk808.yaml | 257 ++++++++++ .../devicetree/bindings/mfd/rockchip,rk809.yaml | 284 +++++++++++ .../devicetree/bindings/mfd/rockchip,rk817.yaml | 382 +++++++++++++++ .../devicetree/bindings/mfd/rockchip,rk818.yaml | 282 +++++++++++ .../devicetree/bindings/mfd/rohm,bd71815-pmic.yaml | 201 ++++++++ .../devicetree/bindings/mfd/rohm,bd71828-pmic.yaml | 204 ++++++++ .../devicetree/bindings/mfd/rohm,bd71837-pmic.yaml | 244 ++++++++++ .../devicetree/bindings/mfd/rohm,bd71847-pmic.yaml | 229 +++++++++ .../devicetree/bindings/mfd/rohm,bd9571mwv.yaml | 127 +++++ .../devicetree/bindings/mfd/rohm,bd9576-pmic.yaml | 123 +++++ .../bindings/mfd/samsung,exynos5433-lpass.yaml | 117 +++++ .../devicetree/bindings/mfd/samsung,s2mpa01.yaml | 91 ++++ .../devicetree/bindings/mfd/samsung,s2mps11.yaml | 267 +++++++++++ .../devicetree/bindings/mfd/samsung,s5m8767.yaml | 307 ++++++++++++ .../devicetree/bindings/mfd/silergy,sy7636a.yaml | 83 ++++ Documentation/devicetree/bindings/mfd/sky81452.txt | 35 ++ .../devicetree/bindings/mfd/sprd,sc27xx-pmic.txt | 40 ++ .../bindings/mfd/sprd,ums512-glbreg.yaml | 71 +++ .../devicetree/bindings/mfd/st,stm32-lptimer.yaml | 145 ++++++ .../devicetree/bindings/mfd/st,stm32-timers.yaml | 176 +++++++ .../devicetree/bindings/mfd/st,stmfx.yaml | 122 +++++ .../devicetree/bindings/mfd/st,stpmic1.yaml | 334 +++++++++++++ .../devicetree/bindings/mfd/stericsson,ab8500.yaml | 522 +++++++++++++++++++++ .../bindings/mfd/stericsson,db8500-prcmu.yaml | 279 +++++++++++ Documentation/devicetree/bindings/mfd/stmpe.txt | 42 ++ Documentation/devicetree/bindings/mfd/syscon.yaml | 118 +++++ Documentation/devicetree/bindings/mfd/tc3589x.txt | 107 +++++ .../devicetree/bindings/mfd/ti,am3359-tscadc.yaml | 84 ++++ .../bindings/mfd/ti,j721e-system-controller.yaml | 101 ++++ .../devicetree/bindings/mfd/ti,lp87524-q1.yaml | 116 +++++ .../devicetree/bindings/mfd/ti,lp87561-q1.yaml | 87 ++++ .../devicetree/bindings/mfd/ti,lp87565-q1.yaml | 105 +++++ .../devicetree/bindings/mfd/ti,tps65086.yaml | 125 +++++ .../bindings/mfd/ti-keystone-devctrl.txt | 19 + Documentation/devicetree/bindings/mfd/ti-lmu.txt | 269 +++++++++++ Documentation/devicetree/bindings/mfd/tps6105x.txt | 62 +++ Documentation/devicetree/bindings/mfd/tps6507x.txt | 91 ++++ Documentation/devicetree/bindings/mfd/tps65910.txt | 205 ++++++++ Documentation/devicetree/bindings/mfd/tps65912.txt | 49 ++ .../devicetree/bindings/mfd/twl-family.txt | 46 ++ .../devicetree/bindings/mfd/twl4030-audio.txt | 46 ++ .../devicetree/bindings/mfd/twl4030-power.txt | 48 ++ Documentation/devicetree/bindings/mfd/twl6040.txt | 67 +++ .../devicetree/bindings/mfd/wlf,arizona.yaml | 281 +++++++++++ Documentation/devicetree/bindings/mfd/wm831x.txt | 81 ++++ .../devicetree/bindings/mfd/x-powers,ac100.yaml | 116 +++++ .../devicetree/bindings/mfd/x-powers,axp152.yaml | 404 ++++++++++++++++ .../devicetree/bindings/mfd/xylon,logicvc.yaml | 63 +++ .../devicetree/bindings/mfd/zii,rave-sp.txt | 39 ++ 137 files changed, 18051 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/88pm860x.txt create mode 100644 Documentation/devicetree/bindings/mfd/act8945a.txt create mode 100644 Documentation/devicetree/bindings/mfd/actions,atc260x.yaml create mode 100644 Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml create mode 100644 Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml create mode 100644 Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml create mode 100644 Documentation/devicetree/bindings/mfd/altera-a10sr.txt create mode 100644 Documentation/devicetree/bindings/mfd/as3711.txt create mode 100644 Documentation/devicetree/bindings/mfd/as3722.txt create mode 100644 Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-gfx.txt create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt create mode 100644 Documentation/devicetree/bindings/mfd/atmel-gpbr.txt create mode 100644 Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt create mode 100644 Documentation/devicetree/bindings/mfd/atmel-matrix.txt create mode 100644 Documentation/devicetree/bindings/mfd/atmel-smc.txt create mode 100644 Documentation/devicetree/bindings/mfd/bfticu.txt create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml create mode 100644 Documentation/devicetree/bindings/mfd/brcm,cru.yaml create mode 100644 Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt create mode 100644 Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt create mode 100644 Documentation/devicetree/bindings/mfd/brcm,misc.yaml create mode 100644 Documentation/devicetree/bindings/mfd/brcm,twd.yaml create mode 100644 Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml create mode 100644 Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml create mode 100644 Documentation/devicetree/bindings/mfd/cirrus,madera.yaml create mode 100644 Documentation/devicetree/bindings/mfd/da9052-i2c.txt create mode 100644 Documentation/devicetree/bindings/mfd/da9055.txt create mode 100644 Documentation/devicetree/bindings/mfd/da9062.txt create mode 100644 Documentation/devicetree/bindings/mfd/da9150.txt create mode 100644 Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml create mode 100644 Documentation/devicetree/bindings/mfd/dlg,da9063.yaml create mode 100644 Documentation/devicetree/bindings/mfd/ene-kb3930.yaml create mode 100644 Documentation/devicetree/bindings/mfd/ene-kb930.yaml create mode 100644 Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml create mode 100644 Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt create mode 100644 Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml create mode 100644 Documentation/devicetree/bindings/mfd/google,cros-ec.yaml create mode 100644 Documentation/devicetree/bindings/mfd/hi6421.txt create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt create mode 100644 Documentation/devicetree/bindings/mfd/iqs62x.yaml create mode 100644 Documentation/devicetree/bindings/mfd/khadas,mcu.yaml create mode 100644 Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml create mode 100644 Documentation/devicetree/bindings/mfd/lp3943.txt create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt create mode 100644 Documentation/devicetree/bindings/mfd/max77620.txt create mode 100644 Documentation/devicetree/bindings/mfd/max77650.yaml create mode 100644 Documentation/devicetree/bindings/mfd/max8925.txt create mode 100644 Documentation/devicetree/bindings/mfd/max8998.txt create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max14577.yaml create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77686.yaml create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77693.yaml create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77714.yaml create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77802.yaml create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77843.yaml create mode 100644 Documentation/devicetree/bindings/mfd/mc13xxx.txt create mode 100644 Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml create mode 100644 Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml create mode 100644 Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml create mode 100644 Documentation/devicetree/bindings/mfd/mfd.txt create mode 100644 Documentation/devicetree/bindings/mfd/motorola-cpcap.txt create mode 100644 Documentation/devicetree/bindings/mfd/mps,mp2629.yaml create mode 100644 Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml create mode 100644 Documentation/devicetree/bindings/mfd/mt6397.txt create mode 100644 Documentation/devicetree/bindings/mfd/mxs-lradc.txt create mode 100644 Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml create mode 100644 Documentation/devicetree/bindings/mfd/omap-usb-host.txt create mode 100644 Documentation/devicetree/bindings/mfd/omap-usb-tll.txt create mode 100644 Documentation/devicetree/bindings/mfd/palmas.txt create mode 100644 Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml create mode 100644 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml create mode 100644 Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml create mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml create mode 100644 Documentation/devicetree/bindings/mfd/qcom-rpm.txt create mode 100644 Documentation/devicetree/bindings/mfd/qriox.txt create mode 100644 Documentation/devicetree/bindings/mfd/retu.txt create mode 100644 Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml create mode 100644 Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml create mode 100644 Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml create mode 100644 Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml create mode 100644 Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml create mode 100644 Documentation/devicetree/bindings/mfd/sky81452.txt create mode 100644 Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt create mode 100644 Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml create mode 100644 Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml create mode 100644 Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml create mode 100644 Documentation/devicetree/bindings/mfd/st,stmfx.yaml create mode 100644 Documentation/devicetree/bindings/mfd/st,stpmic1.yaml create mode 100644 Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml create mode 100644 Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml create mode 100644 Documentation/devicetree/bindings/mfd/stmpe.txt create mode 100644 Documentation/devicetree/bindings/mfd/syscon.yaml create mode 100644 Documentation/devicetree/bindings/mfd/tc3589x.txt create mode 100644 Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml create mode 100644 Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml create mode 100644 Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml create mode 100644 Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml create mode 100644 Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml create mode 100644 Documentation/devicetree/bindings/mfd/ti,tps65086.yaml create mode 100644 Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt create mode 100644 Documentation/devicetree/bindings/mfd/ti-lmu.txt create mode 100644 Documentation/devicetree/bindings/mfd/tps6105x.txt create mode 100644 Documentation/devicetree/bindings/mfd/tps6507x.txt create mode 100644 Documentation/devicetree/bindings/mfd/tps65910.txt create mode 100644 Documentation/devicetree/bindings/mfd/tps65912.txt create mode 100644 Documentation/devicetree/bindings/mfd/twl-family.txt create mode 100644 Documentation/devicetree/bindings/mfd/twl4030-audio.txt create mode 100644 Documentation/devicetree/bindings/mfd/twl4030-power.txt create mode 100644 Documentation/devicetree/bindings/mfd/twl6040.txt create mode 100644 Documentation/devicetree/bindings/mfd/wlf,arizona.yaml create mode 100644 Documentation/devicetree/bindings/mfd/wm831x.txt create mode 100644 Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml create mode 100644 Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml create mode 100644 Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml create mode 100644 Documentation/devicetree/bindings/mfd/zii,rave-sp.txt (limited to 'Documentation/devicetree/bindings/mfd') diff --git a/Documentation/devicetree/bindings/mfd/88pm860x.txt b/Documentation/devicetree/bindings/mfd/88pm860x.txt new file mode 100644 index 000000000..63f3ee337 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/88pm860x.txt @@ -0,0 +1,85 @@ +* Marvell 88PM860x Power Management IC + +Required parent device properties: +- compatible : "marvell,88pm860x" +- reg : the I2C slave address for the 88pm860x chip +- interrupts : IRQ line for the 88pm860x chip +- interrupt-controller: describes the 88pm860x as an interrupt controller (has its own domain) +- #interrupt-cells : should be 1. + - The cell is the 88pm860x local IRQ number + +Optional parent device properties: +- marvell,88pm860x-irq-read-clr: inicates whether interrupt status is cleared by read +- marvell,88pm860x-slave-addr: 88pm860x are two chips solution. stores the I2C address + of one chip, and this property stores the I2C address of + another chip. + +88pm860x consists of a large and varied group of sub-devices: + +Device Supply Names Description +------ ------------ ----------- +88pm860x-onkey : : On key +88pm860x-rtc : : RTC +88pm8607 : : Regulators +88pm860x-backlight : : Backlight +88pm860x-led : : Led +88pm860x-touch : : Touchscreen + +Example: + + pmic: 88pm860x@34 { + compatible = "marvell,88pm860x"; + reg = <0x34>; + interrupts = <4>; + interrupt-parent = <&intc>; + interrupt-controller; + #interrupt-cells = <1>; + + marvell,88pm860x-irq-read-clr; + marvell,88pm860x-slave-addr = <0x11>; + + regulators { + BUCK1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + rtc { + marvell,88pm860x-vrtc = <1>; + }; + touch { + marvell,88pm860x-gpadc-prebias = <1>; + marvell,88pm860x-gpadc-slot-cycle = <1>; + marvell,88pm860x-tsi-prebias = <6>; + marvell,88pm860x-pen-prebias = <16>; + marvell,88pm860x-pen-prechg = <2>; + marvell,88pm860x-resistor-X = <300>; + }; + backlights { + backlight-0 { + marvell,88pm860x-iset = <4>; + marvell,88pm860x-pwm = <3>; + }; + backlight-2 { + }; + }; + leds { + led0-red { + marvell,88pm860x-iset = <12>; + }; + led0-green { + marvell,88pm860x-iset = <12>; + }; + led0-blue { + marvell,88pm860x-iset = <12>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt new file mode 100644 index 000000000..5ca75d888 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/act8945a.txt @@ -0,0 +1,82 @@ +Device-Tree bindings for Active-semi ACT8945A MFD driver + +Required properties: + - compatible: "active-semi,act8945a". + - reg: the I2C slave address for the ACT8945A chip + +The chip exposes two subdevices: + - a regulators: see ../regulator/act8945a-regulator.txt + - a charger: see ../power/act8945a-charger.txt + +Example: + pmic@5b { + compatible = "active-semi,act8945a"; + reg = <0x5b>; + + active-semi,vsel-high; + + regulators { + vdd_1v35_reg: REG_DCDC1 { + regulator-name = "VDD_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vdd_1v2_reg: REG_DCDC2 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + vdd_3v3_reg: REG_DCDC3 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_fuse_reg: REG_LDO1 { + regulator-name = "VDD_FUSE"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_3v3_lp_reg: REG_LDO2 { + regulator-name = "VDD_3V3_LP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_led_reg: REG_LDO3 { + regulator-name = "VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_sdhc_1v8_reg: REG_LDO4 { + regulator-name = "VDD_SDHC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + + charger { + compatible = "active-semi,act8945a-charger"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; + interrupt-parent = <&pioA>; + interrupts = <45 IRQ_TYPE_LEVEL_LOW>; + + active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>; + active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>; + active-semi,input-voltage-threshold-microvolt = <6600>; + active-semi,precondition-timeout = <40>; + active-semi,total-timeout = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml new file mode 100644 index 000000000..dd43a0c76 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/actions,atc260x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi ATC260x Power Management IC bindings + +maintainers: + - Manivannan Sadhasivam + - Cristian Ciocaltea + +description: | + ATC260x series PMICs integrates Audio Codec, Power Management, RTC, IR + and GPIO controller blocks. Currently only the PM related functionalities + (i.e. regulators and system power-off/reboot) for the ATC2603C and ATC2609A + chip variants are supported. + ATC2603C includes 3 programmable DC-DC converters, 9 programmable LDO + regulators and 1 fixed LDO regulator. + ATC2609A includes 5 programmable DC-DC converters and 10 programmable LDO + regulators. + +allOf: + - $ref: ../input/input.yaml + +properties: + compatible: + enum: + - actions,atc2603c + - actions,atc2609a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-time-sec: + description: | + Duration in seconds which the key should be kept pressed for device + to reset automatically. The hardware default is 8. Use 0 to disable + this functionality. + enum: [0, 6, 8, 10, 12] + + regulators: + type: object + description: | + List of child nodes specifying the regulators, depending on chip variant: + * ATC2603C: dcdc[1-3], ldo[1-3,5-8,11,12], switchldo1 + * ATC2609A: dcdc[0-4], ldo[0-9] + + properties: + compatible: + enum: + - actions,atc2603c-regulator + - actions,atc2609a-regulator + + switchldo1: + type: object + $ref: ../regulator/regulator.yaml + + properties: + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-allow-bypass: true + regulator-active-discharge: true + + additionalProperties: false + + patternProperties: + "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2]|switchldo1)-supply$": + description: ATC260x voltage regulators supplies + + "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$": + type: object + $ref: ../regulator/regulator.yaml + + properties: + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-allow-bypass: true + + additionalProperties: false + + allOf: + - if: + properties: + compatible: + contains: + const: actions,atc2603c-regulator + then: + patternProperties: + "^(dcdc[0,4]|ldo[0,4,9])(-supply)?$": false + + "^(ldo|dcdc)": + properties: + regulator-allow-bypass: false + - if: + properties: + compatible: + contains: + const: actions,atc2609a-regulator + then: + patternProperties: + "^(ldo1[1-2]|switchldo1)(-supply)?$": false + + "^(dcdc|ldo[3-9])": + properties: + regulator-allow-bypass: false + + required: + - compatible + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pmic@65 { + compatible = "actions,atc2603c"; + reg = <0x65>; + interrupt-parent = <&sirq>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + + reset-time-sec = <6>; + + regulators { + compatible = "actions,atc2603c-regulator"; + + dcdc1-supply = <®_5v0>; + dcdc3-supply = <®_5v0>; + ldo5-supply = <®_5v0>; + switchldo1-supply = <&vcc>; + + vdd_cpu: dcdc1 { + regulator-name = "VDD_CPU"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + vcc: dcdc3 { + regulator-name = "VCC"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_3v1: ldo5 { + regulator-name = "VCC_3V1"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + }; + + sd_vcc: switchldo1 { + regulator-name = "SD_VCC"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml new file mode 100644 index 000000000..93f5065a6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/allwinner,sun4i-a10-ts.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Resistive Touchscreen Controller + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + "#thermal-sensor-cells": + const: 0 + + compatible: + enum: + - allwinner,sun4i-a10-ts + - allwinner,sun5i-a13-ts + - allwinner,sun6i-a31-ts + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + allwinner,ts-attached: + $ref: /schemas/types.yaml#/definitions/flag + description: A touchscreen is attached to the controller + + allwinner,tp-sensitive-adjust: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 15 + + description: Sensitivity of pen down detection + + allwinner,filter-type: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 1 + + description: | + Select median and averaging filter. Sample used for median / + averaging filter: + 0: 4/2 + 1: 5/3 + 2: 8/4 + 3: 16/8 + +required: + - "#thermal-sensor-cells" + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + rtp: rtp@1c25000 { + compatible = "allwinner,sun4i-a10-ts"; + reg = <0x01c25000 0x100>; + interrupts = <29>; + allwinner,ts-attached; + #thermal-sensor-cells = <0>; + /* sensitive/noisy touch panel */ + allwinner,tp-sensitive-adjust = <0>; + allwinner,filter-type = <3>; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml new file mode 100644 index 000000000..cf94176fe --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml @@ -0,0 +1,259 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/allwinner,sun6i-a31-prcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 PRCM + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +deprecated: true + +properties: + compatible: + const: allwinner,sun6i-a31-prcm + + reg: + maxItems: 1 + +patternProperties: + "^.*_(clk|rst)$": + type: object + unevaluatedProperties: false + + properties: + compatible: + enum: + - allwinner,sun4i-a10-mod0-clk + - allwinner,sun6i-a31-apb0-clk + - allwinner,sun6i-a31-apb0-gates-clk + - allwinner,sun6i-a31-ar100-clk + - allwinner,sun6i-a31-clock-reset + - fixed-factor-clock + + allOf: + - if: + properties: + compatible: + contains: + const: fixed-factor-clock + + then: + $ref: /schemas/clock/fixed-factor-clock.yaml# + + - if: + properties: + compatible: + contains: + const: allwinner,sun4i-a10-mod0-clk + + then: + properties: + "#clock-cells": + const: 0 + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 2 + + clock-output-names: + maxItems: 1 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-apb0-clk + + then: + properties: + "#clock-cells": + const: 0 + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-apb0-gates-clk + + then: + properties: + "#clock-cells": + const: 1 + description: > + This additional argument passed to that clock is the + offset of the bit controlling this particular gate in + the register. + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 1 + + clock-output-names: + minItems: 1 + maxItems: 32 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-ar100-clk + + then: + properties: + "#clock-cells": + const: 0 + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 4 + description: > + The parent order must match the hardware programming + order. + + clock-output-names: + maxItems: 1 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-clock-reset + + then: + properties: + "#reset-cells": + const: 1 + + # Already checked in the main schema + compatible: true + + phandle: true + + required: + - "#reset-cells" + - compatible + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + + prcm@1f01400 { + compatible = "allwinner,sun6i-a31-prcm"; + reg = <0x01f01400 0x200>; + + ar100: ar100_clk { + compatible = "allwinner,sun6i-a31-ar100-clk"; + #clock-cells = <0>; + clocks = <&rtc 0>, <&osc24M>, + <&ccu CLK_PLL_PERIPH>, + <&ccu CLK_PLL_PERIPH>; + clock-output-names = "ar100"; + }; + + ahb0: ahb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&ar100>; + clock-output-names = "ahb0"; + }; + + apb0: apb0_clk { + compatible = "allwinner,sun6i-a31-apb0-clk"; + #clock-cells = <0>; + clocks = <&ahb0>; + clock-output-names = "apb0"; + }; + + apb0_gates: apb0_gates_clk { + compatible = "allwinner,sun6i-a31-apb0-gates-clk"; + #clock-cells = <1>; + clocks = <&apb0>; + clock-output-names = "apb0_pio", "apb0_ir", + "apb0_timer", "apb0_p2wi", + "apb0_uart", "apb0_1wire", + "apb0_i2c"; + }; + + ir_clk: ir_clk { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + clocks = <&rtc 0>, <&osc24M>; + clock-output-names = "ir"; + }; + + apb0_rst: apb0_rst { + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml new file mode 100644 index 000000000..16c80a7ee --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml @@ -0,0 +1,210 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/allwinner,sun8i-a23-prcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A23 PRCM + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +deprecated: true + +properties: + compatible: + const: allwinner,sun8i-a23-prcm + + reg: + maxItems: 1 + +patternProperties: + "^.*(clk|rst|codec).*$": + type: object + unevaluatedProperties: false + + properties: + compatible: + enum: + - fixed-factor-clock + - allwinner,sun8i-a23-apb0-clk + - allwinner,sun8i-a23-apb0-gates-clk + - allwinner,sun6i-a31-clock-reset + - allwinner,sun8i-a23-codec-analog + + required: + - compatible + + allOf: + - if: + properties: + compatible: + contains: + const: fixed-factor-clock + + then: + $ref: /schemas/clock/fixed-factor-clock.yaml# + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-a23-apb0-clk + + then: + properties: + "#clock-cells": + const: 0 + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-a23-apb0-gates-clk + + then: + properties: + "#clock-cells": + const: 1 + description: > + This additional argument passed to that clock is the + offset of the bit controlling this particular gate in + the register. + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 1 + + clock-output-names: + minItems: 1 + maxItems: 32 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-clock-reset + + then: + properties: + "#reset-cells": + const: 1 + + # Already checked in the main schema + compatible: true + + phandle: true + + required: + - "#reset-cells" + - compatible + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-a23-codec-analog + + then: + properties: + # Already checked in the main schema + compatible: true + + phandle: true + + required: + - compatible + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + prcm@1f01400 { + compatible = "allwinner,sun8i-a23-prcm"; + reg = <0x01f01400 0x200>; + + ar100: ar100_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "ar100"; + }; + + ahb0: ahb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&ar100>; + clock-output-names = "ahb0"; + }; + + apb0: apb0_clk { + compatible = "allwinner,sun8i-a23-apb0-clk"; + #clock-cells = <0>; + clocks = <&ahb0>; + clock-output-names = "apb0"; + }; + + apb0_gates: apb0_gates_clk { + compatible = "allwinner,sun8i-a23-apb0-gates-clk"; + #clock-cells = <1>; + clocks = <&apb0>; + clock-output-names = "apb0_pio", "apb0_timer", + "apb0_rsb", "apb0_uart", + "apb0_i2c"; + }; + + apb0_rst: apb0_rst { + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + + codec_analog: codec-analog { + compatible = "allwinner,sun8i-a23-codec-analog"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt new file mode 100644 index 000000000..a688520dd --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt @@ -0,0 +1,56 @@ +* Altera Arria10 Development Kit System Resource Chip + +Required parent device properties: +- compatible : "altr,a10sr" +- spi-max-frequency : Maximum SPI frequency. +- reg : The SPI Chip Select address for the Arria10 + System Resource chip +- interrupts : The interrupt line the device is connected to. +- interrupt-controller : Marks the device node as an interrupt controller. +- #interrupt-cells : The number of cells to describe an IRQ, should be 2. + The first cell is the IRQ number. + The second cell is the flags, encoded as trigger + masks from ../interrupt-controller/interrupts.txt. + +The A10SR consists of these sub-devices: + +Device Description +------ ---------- +a10sr_gpio GPIO Controller +a10sr_rst Reset Controller + +Arria10 GPIO +Required Properties: +- compatible : Should be "altr,a10sr-gpio" +- gpio-controller : Marks the device node as a GPIO Controller. +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify flags. + See ../gpio/gpio.txt for more information. + +Arria10 Peripheral PHY Reset +Required Properties: +- compatible : Should be "altr,a10sr-reset" +- #reset-cells : Should be one. + +Example: + + resource-manager@0 { + compatible = "altr,a10sr"; + reg = <0>; + spi-max-frequency = <100000>; + interrupt-parent = <&portb>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + a10sr_gpio: gpio-controller { + compatible = "altr,a10sr-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + a10sr_rst: reset-controller { + compatible = "altr,a10sr-reset"; + #reset-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/as3711.txt b/Documentation/devicetree/bindings/mfd/as3711.txt new file mode 100644 index 000000000..d98cf18c7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/as3711.txt @@ -0,0 +1,73 @@ +AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power +supplies, a battery charger and an RTC. So far only bindings for the two stepup +DCDC converters are defined. Other DCDC and LDO supplies are configured, using +standard regulator properties, they must belong to a sub-node, called +"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter +configuration should be placed in a subnode, called "backlight." + +Compulsory properties: +- compatible : must be "ams,as3711" +- reg : specifies the I2C address + +To use the SU1 converter as a backlight source the following two properties must +be provided: +- su1-dev : framebuffer phandle +- su1-max-uA : maximum current + +To use the SU2 converter as a backlight source the following two properties must +be provided: +- su2-dev : framebuffer phandle +- su1-max-uA : maximum current + +Additionally one of these properties must be provided to select the type of +feedback used: +- su2-feedback-voltage : voltage feedback is used +- su2-feedback-curr1 : CURR1 input used for current feedback +- su2-feedback-curr2 : CURR2 input used for current feedback +- su2-feedback-curr3 : CURR3 input used for current feedback +- su2-feedback-curr-auto: automatic current feedback selection + +and one of these to select the over-voltage protection pin +- su2-fbprot-lx-sd4 : LX_SD4 is used for over-voltage protection +- su2-fbprot-gpio2 : GPIO2 is used for over-voltage protection +- su2-fbprot-gpio3 : GPIO3 is used for over-voltage protection +- su2-fbprot-gpio4 : GPIO4 is used for over-voltage protection + +If "su2-feedback-curr-auto" is selected, one or more of the following properties +have to be specified: +- su2-auto-curr1 : use CURR1 input for current feedback +- su2-auto-curr2 : use CURR2 input for current feedback +- su2-auto-curr3 : use CURR3 input for current feedback + +Example: + +as3711@40 { + compatible = "ams,as3711"; + reg = <0x40>; + + regulators { + sd4 { + regulator-name = "1.215V"; + regulator-min-microvolt = <1215000>; + regulator-max-microvolt = <1235000>; + }; + ldo2 { + regulator-name = "2.8V CPU"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + + backlight { + compatible = "ams,as3711-bl"; + su2-dev = <&lcdc>; + su2-max-uA = <36000>; + su2-feedback-curr-auto; + su2-fbprot-gpio4; + su2-auto-curr1; + su2-auto-curr2; + su2-auto-curr3; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt new file mode 100644 index 000000000..2a665741d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/as3722.txt @@ -0,0 +1,214 @@ +* ams AS3722 Power management IC. + +Required properties: +------------------- +- compatible: Must be "ams,as3722". +- reg: I2C device address. +- interrupt-controller: AS3722 has internal interrupt controller which takes the + interrupt request from internal sub-blocks like RTC, regulators, GPIOs as well + as external input. +- #interrupt-cells: Should be set to 2 for IRQ number and flags. + The first cell is the IRQ number. IRQ numbers for different interrupt source + of AS3722 are defined at dt-bindings/mfd/as3722.h + The second cell is the flags, encoded as the trigger masks from binding document + interrupts.txt, using dt-bindings/irq. + +Optional properties: +-------------------- +- ams,enable-internal-int-pullup: Boolean property, to enable internal pullup on + interrupt pin. Missing this will disable internal pullup on INT pin. +- ams,enable-internal-i2c-pullup: Boolean property, to enable internal pullup on + i2c scl/sda pins. Missing this will disable internal pullup on i2c + scl/sda lines. +- ams,enable-ac-ok-power-on: Boolean property, to enable exit out of power off + mode with AC_OK pin (pin enabled in power off mode). + +Optional submodule and their properties: +======================================= + +Pinmux and GPIO: +=============== +Device has 8 GPIO pins which can be configured as GPIO as well as the special IO +functions. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Following are properties which is needed if GPIO and pinmux functionality +is required: + Required properties: + ------------------- + - gpio-controller: Marks the device node as a GPIO controller. + - #gpio-cells: Number of GPIO cells. Refer to binding document + gpio/gpio.txt + + Optional properties: + -------------------- + Following properties are require if pin control setting is required + at boot. + - pinctrl-names: A pinctrl state named "default" be defined, using the + bindings in pinctrl/pinctrl-bindings.txt. + - pinctrl[0...n]: Properties to contain the phandle that refer to + different nodes of pin control settings. These nodes represents + the pin control setting of state 0 to state n. Each of these + nodes contains different subnodes to represents some desired + configuration for a list of pins. This configuration can + include the mux function to select on those pin(s), and + various pin configuration parameters, such as pull-up, + open drain. + + Each subnode have following properties: + Required properties: + - pins: List of pins. Valid values of pins properties are: + gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, + gpio6, gpio7 + + Optional properties: + function, bias-disable, bias-pull-up, bias-pull-down, + bias-high-impedance, drive-open-drain. + + Valid values for function properties are: + gpio, interrupt-out, gpio-in-interrupt, + vsup-vbat-low-undebounce-out, + vsup-vbat-low-debounce-out, + voltage-in-standby, oc-pg-sd0, oc-pg-sd6, + powergood-out, pwm-in, pwm-out, clk32k-out, + watchdog-in, soft-reset-in + +Regulators: +=========== +Device has multiple DCDC and LDOs. The node "regulators" is require if regulator +functionality is needed. + +Following are properties of regulator subnode. + + Optional properties: + ------------------- + The input supply of regulators are the optional properties on the + regulator node. The input supply of these regulators are provided + through following properties: + vsup-sd2-supply: Input supply for SD2. + vsup-sd3-supply: Input supply for SD3. + vsup-sd4-supply: Input supply for SD4. + vsup-sd5-supply: Input supply for SD5. + vin-ldo0-supply: Input supply for LDO0. + vin-ldo1-6-supply: Input supply for LDO1 and LDO6. + vin-ldo2-5-7-supply: Input supply for LDO2, LDO5 and LDO7. + vin-ldo3-4-supply: Input supply for LDO3 and LDO4. + vin-ldo9-10-supply: Input supply for LDO9 and LDO10. + vin-ldo11-supply: Input supply for LDO11. + + Optional sub nodes for regulators: + --------------------------------- + The subnodes name is the name of regulator and it must be one of: + sd[0-6], ldo[0-7], ldo[9-11] + + Each sub-node should contain the constraints and initialization + information for that regulator. See regulator.txt for a description + of standard properties for these sub-nodes. + Additional optional custom properties are listed below. + ams,ext-control: External control of the rail. The option of + this properties will tell which external input is + controlling this rail. Valid values are 0, 1, 2 ad 3. + 0: There is no external control of this rail. + 1: Rail is controlled by ENABLE1 input pin. + 2: Rail is controlled by ENABLE2 input pin. + 3: Rail is controlled by ENABLE3 input pin. + Missing this property on DT will be assume as no + external control. The external control pin macros + are defined @dt-bindings/mfd/as3722.h + + ams,enable-tracking: Enable tracking with SD1, only supported + by LDO3. + +Power-off: +========= +AS3722 supports the system power off by turning off all its rails. +The device node should have the following properties to enable this +functionality +ams,system-power-controller: Boolean, to enable the power off functionality + through this device. + +Example: +-------- +#include +... +ams3722 { + compatible = "ams,as3722"; + reg = <0x48>; + + ams,system-power-controller; + + interrupt-parent = <&intc>; + interrupt-controller; + #interrupt-cells = <2>; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + bias-pull-down; + }; + + gpio1_2_4_7 { + pins = "gpio1", "gpio2", "gpio4", "gpio7"; + function = "gpio"; + bias-pull-up; + }; + + gpio5 { + pins = "gpio5"; + function = "clk32k_out"; + }; + } + + regulators { + vsup-sd2-supply = <...>; + ... + + sd0 { + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + ams,ext-control = <2>; + }; + + sd1 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + ams,ext-control = <1>; + }; + + sd2 { + regulator-name = "vddio_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + sd4 { + regulator-name = "avdd-hdmi-pex"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + sd5 { + regulator-name = "vdd-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + .... + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml new file mode 100644 index 000000000..1689b986f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed System Control Unit + +description: + The Aspeed System Control Unit manages the global behaviour of the SoC, + configuring elements such as clocks, pinmux, and reset. + +maintainers: + - Joel Stanley + - Andrew Jeffery + +properties: + compatible: + items: + - enum: + - aspeed,ast2400-scu + - aspeed,ast2500-scu + - aspeed,ast2600-scu + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +patternProperties: + '^p2a-control@[0-9a-f]+$': + description: See Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt + type: object + + '^pinctrl(@[0-9a-f]+)?$': + oneOf: + - $ref: /schemas/pinctrl/aspeed,ast2400-pinctrl.yaml + - $ref: /schemas/pinctrl/aspeed,ast2500-pinctrl.yaml + - $ref: /schemas/pinctrl/aspeed,ast2600-pinctrl.yaml + + '^interrupt-controller@[0-9a-f]+$': + description: See Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt + type: object + + '^silicon-id@[0-9a-f]+$': + description: Unique hardware silicon identifiers within the SoC + type: object + additionalProperties: false + + properties: + compatible: + items: + - enum: + - aspeed,ast2400-silicon-id + - aspeed,ast2500-silicon-id + - aspeed,ast2600-silicon-id + - const: aspeed,silicon-id + + reg: + description: + The reg should be the unique silicon id register, and not backwards + compatible one in eg. the 2600. + minItems: 1 + items: + - description: silicon id information registers + - description: unique chip id registers + +required: + - compatible + - reg + - ranges + - '#address-cells' + - '#size-cells' + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + syscon@1e6e2000 { + compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + #clock-cells = <1>; + #reset-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e6e2000 0x1000>; + + silicon-id@7c { + compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id"; + reg = <0x7c 0x4>, <0x150 0x8>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt new file mode 100644 index 000000000..aea5370ef --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt @@ -0,0 +1,17 @@ +* Device tree bindings for Aspeed SoC Display Controller (GFX) + +The Aspeed SoC Display Controller primarily does as its name suggests, but also +participates in pinmux requests on the g5 SoCs. It is therefore considered a +syscon device. + +Required properties: +- compatible: "aspeed,ast2500-gfx", "syscon" +- reg: contains offset/length value of the GFX memory + region. + +Example: + +gfx: display@1e6e6000 { + compatible = "aspeed,ast2500-gfx", "syscon"; + reg = <0x1e6e6000 0x1000>; +}; diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml new file mode 100644 index 000000000..750996d9a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# # Copyright (c) 2021 Aspeed Tehchnology Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed Low Pin Count (LPC) Bus Controller + +maintainers: + - Andrew Jeffery + - Chia-Wei Wang + +description: + The LPC bus is a means to bridge a host CPU to a number of low-bandwidth + peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The + primary use case of the Aspeed LPC controller is as a slave on the bus + (typically in a Baseboard Management Controller SoC), but under certain + conditions it can also take the role of bus master. + + The LPC controller is represented as a multi-function device to account for the + mix of functionality, which includes, but is not limited to + + * An IPMI Block Transfer[2] Controller + + * An LPC Host Interface Controller manages functions exposed to the host such + as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART + management and bus snoop configuration. + + * A set of SuperIO[3] scratch registers enableing implementation of e.g. custom + hardware management protocols for handover between the host and baseboard + management controller. + + Additionally the state of the LPC controller influences the pinmux + configuration, therefore the host portion of the controller is exposed as a + syscon as a means to arbitrate access. + +properties: + compatible: + items: + - enum: + - aspeed,ast2400-lpc-v2 + - aspeed,ast2500-lpc-v2 + - aspeed,ast2600-lpc-v2 + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^lpc-ctrl@[0-9a-f]+$": + type: object + additionalProperties: false + + description: | + The LPC Host Interface Controller manages functions exposed to the host such as + LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART management + and bus snoop configuration. + + properties: + compatible: + items: + - enum: + - aspeed,ast2400-lpc-ctrl + - aspeed,ast2500-lpc-ctrl + - aspeed,ast2600-lpc-ctrl + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + memory-region: + maxItems: 1 + description: handle to memory reservation for the LPC to AHB mapping region + + flash: + $ref: /schemas/types.yaml#/definitions/phandle + description: The SPI flash controller containing the flash to be exposed over the LPC to AHB mapping + + required: + - compatible + - clocks + + "^reset-controller@[0-9a-f]+$": + type: object + additionalProperties: false + + description: + The UARTs present in the ASPEED SoC can have their resets tied to the reset + state of the LPC bus. Some systems may chose to modify this configuration + + properties: + compatible: + items: + - enum: + - aspeed,ast2400-lpc-reset + - aspeed,ast2500-lpc-reset + - aspeed,ast2600-lpc-reset + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + + required: + - compatible + - '#reset-cells' + + "^lpc-snoop@[0-9a-f]+$": + type: object + additionalProperties: false + + description: + The LPC snoop interface allows the BMC to listen on and record the data + bytes written by the Host to the targeted LPC I/O pots. + + properties: + compatible: + items: + - enum: + - aspeed,ast2400-lpc-snoop + - aspeed,ast2500-lpc-snoop + - aspeed,ast2600-lpc-snoop + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + snoop-ports: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: The LPC I/O ports to snoop + + required: + - compatible + - interrupts + - snoop-ports + + "^uart-routing@[0-9a-f]+$": + $ref: /schemas/soc/aspeed/uart-routing.yaml# + description: The UART routing control under LPC register space + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: + type: object + +examples: + - | + #include + #include + + lpc: lpc@1e789000 { + compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + lpc_ctrl: lpc-ctrl@80 { + compatible = "aspeed,ast2600-lpc-ctrl"; + reg = <0x80 0x80>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + memory-region = <&flash_memory>; + flash = <&spi>; + }; + + lpc_reset: reset-controller@98 { + compatible = "aspeed,ast2600-lpc-reset"; + reg = <0x98 0x4>; + #reset-cells = <1>; + }; + + lpc_snoop: lpc-snoop@90 { + compatible = "aspeed,ast2600-lpc-snoop"; + reg = <0x90 0x8>; + interrupts = ; + snoop-ports = <0x80>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt new file mode 100644 index 000000000..9d8375356 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt @@ -0,0 +1,63 @@ +* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit) + +The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C +controller and an USART. Only one function can be used at a time and is chosen +at boot time according to the device tree. + +Required properties: +- compatible: Should be "atmel,sama5d2-flexcom" +- reg: Should be the offset/length value for Flexcom dedicated + I/O registers (without USART, TWI or SPI registers). +- clocks: Should be the Flexcom peripheral clock from PMC. +- #address-cells: Should be <1> +- #size-cells: Should be <1> +- ranges: Should be one range for the full I/O register region + (including USART, TWI and SPI registers). +- atmel,flexcom-mode: Should be one of the following values: + - <1> for USART + - <2> for SPI + - <3> for I2C + +Required child: +A single available child device of type matching the "atmel,flexcom-mode" +property. + +The phandle provided by the clocks property of the child is the same as one for +the Flexcom parent. + +For other properties, please refer to the documentations of the respective +device: +- ../serial/atmel-usart.txt +- ../spi/spi_atmel.txt +- ../i2c/i2c-at91.txt + +Example: + +flexcom@f8034000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8034000 0x200>; + clocks = <&flx0_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8034000 0x800>; + atmel,flexcom-mode = <2>; + + spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx0_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + + flash@0 { + compatible = "atmel,at25f512b"; + reg = <0>; + spi-max-frequency = <20000000>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt new file mode 100644 index 000000000..e8c525569 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt @@ -0,0 +1,17 @@ +* Device tree bindings for Atmel GPBR (General Purpose Backup Registers) + +The GPBR are a set of battery-backed registers. + +Required properties: +- compatible: Should be one of the following: + "atmel,at91sam9260-gpbr", "syscon" + "microchip,sam9x60-gpbr", "syscon" +- reg: contains offset/length value of the GPBR memory + region. + +Example: + +gpbr: gpbr@fffffd50 { + compatible = "atmel,at91sam9260-gpbr", "syscon"; + reg = <0xfffffd50 0x10>; +}; diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt new file mode 100644 index 000000000..5f8880cc7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt @@ -0,0 +1,55 @@ +Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver + +Required properties: + - compatible: value should be one of the following: + "atmel,at91sam9n12-hlcdc" + "atmel,at91sam9x5-hlcdc" + "atmel,sama5d2-hlcdc" + "atmel,sama5d3-hlcdc" + "atmel,sama5d4-hlcdc" + "microchip,sam9x60-hlcdc" + - reg: base address and size of the HLCDC device registers. + - clock-names: the name of the 3 clocks requested by the HLCDC device. + Should contain "periph_clk", "sys_clk" and "slow_clk". + - clocks: should contain the 3 clocks requested by the HLCDC device. + - interrupts: should contain the description of the HLCDC interrupt line + +The HLCDC IP exposes two subdevices: + - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt + - a Display Controller: see ../display/atmel/hlcdc-dc.txt + +Example: + + hlcdc: hlcdc@f0030000 { + compatible = "atmel,sama5d3-hlcdc"; + reg = <0xf0030000 0x2000>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt new file mode 100644 index 000000000..89d05c64f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt @@ -0,0 +1,25 @@ +* Device tree bindings for Atmel Bus Matrix + +The Bus Matrix registers are used to configure Atmel SoCs internal bus +behavior (master/slave priorities, undefined burst length type, ...) + +Required properties: +- compatible: Should be one of the following + "atmel,at91sam9260-matrix", "syscon" + "atmel,at91sam9261-matrix", "syscon" + "atmel,at91sam9263-matrix", "syscon" + "atmel,at91sam9rl-matrix", "syscon" + "atmel,at91sam9g45-matrix", "syscon" + "atmel,at91sam9n12-matrix", "syscon" + "atmel,at91sam9x5-matrix", "syscon" + "atmel,sama5d3-matrix", "syscon" + "microchip,sam9x60-matrix", "syscon" +- reg: Contains offset/length value of the Bus Matrix + memory region. + +Example: + +matrix: matrix@ffffec00 { + compatible = "atmel,sama5d3-matrix", "syscon"; + reg = <0xffffec00 0x200>; +}; diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt new file mode 100644 index 000000000..5696d9fcb --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt @@ -0,0 +1,21 @@ +* Device tree bindings for Atmel SMC (Static Memory Controller) + +The SMC registers are used to configure Atmel EBI (External Bus Interface) +to interface with standard memory devices (NAND, NOR, SRAM or specialized +devices like FPGAs). + +Required properties: +- compatible: Should be one of the following + "atmel,at91sam9260-smc", "syscon" + "atmel,sama5d3-smc", "syscon" + "atmel,sama5d2-smc", "syscon" + "microchip,sam9x60-smc", "syscon" +- reg: Contains offset/length value of the SMC memory + region. + +Example: + +smc: smc@ffffc000 { + compatible = "atmel,sama5d3-smc", "syscon"; + reg = <0xffffc000 0x1000>; +}; diff --git a/Documentation/devicetree/bindings/mfd/bfticu.txt b/Documentation/devicetree/bindings/mfd/bfticu.txt new file mode 100644 index 000000000..538192fda --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/bfticu.txt @@ -0,0 +1,24 @@ +KEYMILE bfticu Chassis Management FPGA + +The bfticu is a multifunction device that manages the whole chassis. +Its main functionality is to collect IRQs from the whole chassis and signals +them to a single controller. + +Required properties: +- compatible: "keymile,bfticu" +- interrupt-controller: the bfticu FPGA is an interrupt controller +- interrupts: the main IRQ line to signal the collected IRQs +- #interrupt-cells : is 2 and their usage is compliant to the 2 cells variant + of Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +- reg: access on the parent local bus (chip select, offset in chip select, size) + +Example: + + chassis-mgmt@3,0 { + compatible = "keymile,bfticu"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <3 0 0x100>; + interrupt-parent = <&mpic>; + interrupts = <6 1 0 0>; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt b/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt new file mode 100644 index 000000000..be51a15e0 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt @@ -0,0 +1,39 @@ +------------------------------- +BCM590xx Power Management Units +------------------------------- + +Required properties: +- compatible: "brcm,bcm59056" +- reg: I2C slave address +- interrupts: interrupt for the PMU. Generic interrupt client node bindings + are described in interrupt-controller/interrupts.txt + +------------------ +Voltage Regulators +------------------ + +Optional child nodes: +- regulators: container node for regulators following the generic + regulator binding in regulator/regulator.txt + + The valid regulator node names for BCM59056 are: + rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo, + mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo, + csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr, + gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6, + vbus + +Example: + pmu: bcm59056@8 { + compatible = "brcm,bcm59056"; + reg = <0x08>; + interrupts = ; + regulators { + rfldo_reg: rfldo { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + ... + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml new file mode 100644 index 000000000..148f1da47 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6318-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6318 GPIO System Controller + +maintainers: + - Álvaro Fernández Rojas + - Jonas Gorski + +description: + Broadcom BCM6318 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6318-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm6318-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6318-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6318-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 50>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@10 { + compatible = "brcm,bcm6318-pinctrl"; + reg = <0x18 0x10>, <0x54 0x18>; + + pinctrl_ephy0_spd_led: ephy0_spd_led-pins { + function = "ephy0_spd_led"; + pins = "gpio0"; + }; + + pinctrl_ephy1_spd_led: ephy1_spd_led-pins { + function = "ephy1_spd_led"; + pins = "gpio1"; + }; + + pinctrl_ephy2_spd_led: ephy2_spd_led-pins { + function = "ephy2_spd_led"; + pins = "gpio2"; + }; + + pinctrl_ephy3_spd_led: ephy3_spd_led-pins { + function = "ephy3_spd_led"; + pins = "gpio3"; + }; + + pinctrl_ephy0_act_led: ephy0_act_led-pins { + function = "ephy0_act_led"; + pins = "gpio4"; + }; + + pinctrl_ephy1_act_led: ephy1_act_led-pins { + function = "ephy1_act_led"; + pins = "gpio5"; + }; + + pinctrl_ephy2_act_led: ephy2_act_led-pins { + function = "ephy2_act_led"; + pins = "gpio6"; + }; + + pinctrl_ephy3_act_led: ephy3_act_led-pins { + function = "ephy3_act_led"; + pins = "gpio7"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio6"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio7"; + }; + }; + + pinctrl_inet_act_led: inet_act_led-pins { + function = "inet_act_led"; + pins = "gpio8"; + }; + + pinctrl_inet_fail_led: inet_fail_led-pins { + function = "inet_fail_led"; + pins = "gpio9"; + }; + + pinctrl_dsl_led: dsl_led-pins { + function = "dsl_led"; + pins = "gpio10"; + }; + + pinctrl_post_fail_led: post_fail_led-pins { + function = "post_fail_led"; + pins = "gpio11"; + }; + + pinctrl_wlan_wps_led: wlan_wps_led-pins { + function = "wlan_wps_led"; + pins = "gpio12"; + }; + + pinctrl_usb_pwron: usb_pwron-pins { + function = "usb_pwron"; + pins = "gpio13"; + }; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio13"; + }; + + pinctrl_usb_active: usb_active-pins { + function = "usb_active"; + pins = "gpio40"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml new file mode 100644 index 000000000..7e582243e --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm63268-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM63268 GPIO System Controller + +maintainers: + - Álvaro Fernández Rojas + - Jonas Gorski + +description: + Broadcom BCM63268 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm63268-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm63268-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@100000c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm63268-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x100000c0 0x80>; + ranges = <0 0x100000c0 0x80>; + + gpio@0 { + compatible = "brcm,bcm63268-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 52>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@10 { + compatible = "brcm,bcm63268-pinctrl"; + reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio0"; + }; + + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio1"; + }; + }; + + pinctrl_hsspi_cs4: hsspi_cs4-pins { + function = "hsspi_cs4"; + pins = "gpio16"; + }; + + pinctrl_hsspi_cs5: hsspi_cs5-pins { + function = "hsspi_cs5"; + pins = "gpio17"; + }; + + pinctrl_hsspi_cs6: hsspi_cs6-pins { + function = "hsspi_cs6"; + pins = "gpio8"; + }; + + pinctrl_hsspi_cs7: hsspi_cs7-pins { + function = "hsspi_cs7"; + pins = "gpio9"; + }; + + pinctrl_adsl_spi: adsl_spi-pins { + pinctrl_adsl_spi_miso: adsl_spi_miso-pins { + function = "adsl_spi_miso"; + pins = "gpio18"; + }; + + pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { + function = "adsl_spi_mosi"; + pins = "gpio19"; + }; + }; + + pinctrl_vreq_clk: vreq_clk-pins { + function = "vreq_clk"; + pins = "gpio22"; + }; + + pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins { + function = "pcie_clkreq_b"; + pins = "gpio23"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio30"; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio31"; + }; + + pinctrl_nand: nand-pins { + function = "nand"; + group = "nand_grp"; + }; + + pinctrl_gpio35_alt: gpio35_alt-pins { + function = "gpio35_alt"; + pin = "gpio35"; + }; + + pinctrl_dectpd: dectpd-pins { + function = "dectpd"; + group = "dectpd_grp"; + }; + + pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins { + function = "vdsl_phy_override_0"; + group = "vdsl_phy_override_0_grp"; + }; + + pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins { + function = "vdsl_phy_override_1"; + group = "vdsl_phy_override_1_grp"; + }; + + pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins { + function = "vdsl_phy_override_2"; + group = "vdsl_phy_override_2_grp"; + }; + + pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins { + function = "vdsl_phy_override_3"; + group = "vdsl_phy_override_3_grp"; + }; + + pinctrl_dsl_gpio8: dsl_gpio8-pins { + function = "dsl_gpio8"; + group = "dsl_gpio8"; + }; + + pinctrl_dsl_gpio9: dsl_gpio9-pins { + function = "dsl_gpio9"; + group = "dsl_gpio9"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml new file mode 100644 index 000000000..2230848e1 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6328-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6328 GPIO System Controller + +maintainers: + - Álvaro Fernández Rojas + - Jonas Gorski + +description: + Broadcom BCM6328 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6328-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm6328-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6328-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6328-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6328-pinctrl"; + reg = <0x18 0x10>; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio6"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio7"; + }; + }; + + pinctrl_inet_act_led: inet_act_led-pins { + function = "inet_act_led"; + pins = "gpio11"; + }; + + pinctrl_pcie_clkreq: pcie_clkreq-pins { + function = "pcie_clkreq"; + pins = "gpio16"; + }; + + pinctrl_ephy0_spd_led: ephy0_spd_led-pins { + function = "led"; + pins = "gpio17"; + }; + + pinctrl_ephy1_spd_led: ephy1_spd_led-pins { + function = "led"; + pins = "gpio18"; + }; + + pinctrl_ephy2_spd_led: ephy2_spd_led-pins { + function = "led"; + pins = "gpio19"; + }; + + pinctrl_ephy3_spd_led: ephy3_spd_led-pins { + function = "led"; + pins = "gpio20"; + }; + + pinctrl_ephy0_act_led: ephy0_act_led-pins { + function = "ephy0_act_led"; + pins = "gpio25"; + }; + + pinctrl_ephy1_act_led: ephy1_act_led-pins { + function = "ephy1_act_led"; + pins = "gpio26"; + }; + + pinctrl_ephy2_act_led: ephy2_act_led-pins { + function = "ephy2_act_led"; + pins = "gpio27"; + }; + + pinctrl_ephy3_act_led: ephy3_act_led-pins { + function = "ephy3_act_led"; + pins = "gpio28"; + }; + + pinctrl_hsspi_cs1: hsspi_cs1-pins { + function = "hsspi_cs1"; + pins = "hsspi_cs1"; + }; + + pinctrl_usb_port1_device: usb_port1_device-pins { + function = "usb_device_port"; + pins = "usb_port1"; + }; + + pinctrl_usb_port1_host: usb_port1_host-pins { + function = "usb_host_port"; + pins = "usb_port1"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml new file mode 100644 index 000000000..c06693b6f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6358-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6358 GPIO System Controller + +maintainers: + - Álvaro Fernández Rojas + - Jonas Gorski + +description: + Broadcom BCM6358 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6358-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm6358-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@fffe0080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6358-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0xfffe0080 0x80>; + ranges = <0 0xfffe0080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6358-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 40>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6358-pinctrl"; + reg = <0x18 0x4>; + + pinctrl_ebi_cs: ebi_cs-pins { + function = "ebi_cs"; + groups = "ebi_cs_grp"; + }; + + pinctrl_uart1: uart1-pins { + function = "uart1"; + groups = "uart1_grp"; + }; + + pinctrl_serial_led: serial_led-pins { + function = "serial_led"; + groups = "serial_led_grp"; + }; + + pinctrl_legacy_led: legacy_led-pins { + function = "legacy_led"; + groups = "legacy_led_grp"; + }; + + pinctrl_led: led-pins { + function = "led"; + groups = "led_grp"; + }; + + pinctrl_spi_cs_23: spi_cs-pins { + function = "spi_cs"; + groups = "spi_cs_grp"; + }; + + pinctrl_utopia: utopia-pins { + function = "utopia"; + groups = "utopia_grp"; + }; + + pinctrl_pwm_syn_clk: pwm_syn_clk-pins { + function = "pwm_syn_clk"; + groups = "pwm_syn_clk_grp"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + groups = "sys_irq_grp"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml new file mode 100644 index 000000000..c560bede0 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml @@ -0,0 +1,236 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6362-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6362 GPIO System Controller + +maintainers: + - Álvaro Fernández Rojas + - Jonas Gorski + +description: + Broadcom BCM6362 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6362-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm6362-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6362-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6362-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 48>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6362-pinctrl"; + reg = <0x18 0x10>, <0x38 0x4>; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio0"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + pins = "gpio1"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio2"; + }; + + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio3"; + }; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio4"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio5"; + }; + + pinctrl_robosw_led0: robosw_led0-pins { + function = "robosw_led0"; + pins = "gpio6"; + }; + + pinctrl_robosw_led1: robosw_led1-pins { + function = "robosw_led1"; + pins = "gpio7"; + }; + + pinctrl_inet_led: inet_led-pins { + function = "inet_led"; + pins = "gpio8"; + }; + + pinctrl_spi_cs2: spi_cs2-pins { + function = "spi_cs2"; + pins = "gpio9"; + }; + + pinctrl_spi_cs3: spi_cs3-pins { + function = "spi_cs3"; + pins = "gpio10"; + }; + + pinctrl_ntr_pulse: ntr_pulse-pins { + function = "ntr_pulse"; + pins = "gpio11"; + }; + + pinctrl_uart1_scts: uart1_scts-pins { + function = "uart1_scts"; + pins = "gpio12"; + }; + + pinctrl_uart1_srts: uart1_srts-pins { + function = "uart1_srts"; + pins = "gpio13"; + }; + + pinctrl_uart1: uart1-pins { + pinctrl_uart1_sdin: uart1_sdin-pins { + function = "uart1_sdin"; + pins = "gpio14"; + }; + + pinctrl_uart1_sdout: uart1_sdout-pins { + function = "uart1_sdout"; + pins = "gpio15"; + }; + }; + + pinctrl_adsl_spi: adsl_spi-pins { + pinctrl_adsl_spi_miso: adsl_spi_miso-pins { + function = "adsl_spi_miso"; + pins = "gpio16"; + }; + + pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { + function = "adsl_spi_mosi"; + pins = "gpio17"; + }; + + pinctrl_adsl_spi_clk: adsl_spi_clk-pins { + function = "adsl_spi_clk"; + pins = "gpio18"; + }; + + pinctrl_adsl_spi_cs: adsl_spi_cs-pins { + function = "adsl_spi_cs"; + pins = "gpio19"; + }; + }; + + pinctrl_ephy0_led: ephy0_led-pins { + function = "ephy0_led"; + pins = "gpio20"; + }; + + pinctrl_ephy1_led: ephy1_led-pins { + function = "ephy1_led"; + pins = "gpio21"; + }; + + pinctrl_ephy2_led: ephy2_led-pins { + function = "ephy2_led"; + pins = "gpio22"; + }; + + pinctrl_ephy3_led: ephy3_led-pins { + function = "ephy3_led"; + pins = "gpio23"; + }; + + pinctrl_ext_irq0: ext_irq0-pins { + function = "ext_irq0"; + pins = "gpio24"; + }; + + pinctrl_ext_irq1: ext_irq1-pins { + function = "ext_irq1"; + pins = "gpio25"; + }; + + pinctrl_ext_irq2: ext_irq2-pins { + function = "ext_irq2"; + pins = "gpio26"; + }; + + pinctrl_ext_irq3: ext_irq3-pins { + function = "ext_irq3"; + pins = "gpio27"; + }; + + pinctrl_nand: nand-pins { + function = "nand"; + group = "nand_grp"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml new file mode 100644 index 000000000..c534f5f24 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml @@ -0,0 +1,246 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6368-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6368 GPIO System Controller + +maintainers: + - Álvaro Fernández Rojas + - Jonas Gorski + +description: + Broadcom BCM6368 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6368-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm6368-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6368-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6368-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 38>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6368-pinctrl"; + reg = <0x18 0x4>, <0x38 0x4>; + + pinctrl_analog_afe_0: analog_afe_0-pins { + function = "analog_afe_0"; + pins = "gpio0"; + }; + + pinctrl_analog_afe_1: analog_afe_1-pins { + function = "analog_afe_1"; + pins = "gpio1"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + pins = "gpio2"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio3"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio4"; + }; + }; + + pinctrl_inet_led: inet_led-pins { + function = "inet_led"; + pins = "gpio5"; + }; + + pinctrl_ephy0_led: ephy0_led-pins { + function = "ephy0_led"; + pins = "gpio6"; + }; + + pinctrl_ephy1_led: ephy1_led-pins { + function = "ephy1_led"; + pins = "gpio7"; + }; + + pinctrl_ephy2_led: ephy2_led-pins { + function = "ephy2_led"; + pins = "gpio8"; + }; + + pinctrl_ephy3_led: ephy3_led-pins { + function = "ephy3_led"; + pins = "gpio9"; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio10"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio11"; + }; + + pinctrl_robosw_led0: robosw_led0-pins { + function = "robosw_led0"; + pins = "gpio12"; + }; + + pinctrl_robosw_led1: robosw_led1-pins { + function = "robosw_led1"; + pins = "gpio13"; + }; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio14"; + }; + + pinctrl_pci: pci-pins { + pinctrl_pci_req1: pci_req1-pins { + function = "pci_req1"; + pins = "gpio16"; + }; + + pinctrl_pci_gnt1: pci_gnt1-pins { + function = "pci_gnt1"; + pins = "gpio17"; + }; + + pinctrl_pci_intb: pci_intb-pins { + function = "pci_intb"; + pins = "gpio18"; + }; + + pinctrl_pci_req0: pci_req0-pins { + function = "pci_req0"; + pins = "gpio19"; + }; + + pinctrl_pci_gnt0: pci_gnt0-pins { + function = "pci_gnt0"; + pins = "gpio20"; + }; + }; + + pinctrl_pcmcia: pcmcia-pins { + pinctrl_pcmcia_cd1: pcmcia_cd1-pins { + function = "pcmcia_cd1"; + pins = "gpio22"; + }; + + pinctrl_pcmcia_cd2: pcmcia_cd2-pins { + function = "pcmcia_cd2"; + pins = "gpio23"; + }; + + pinctrl_pcmcia_vs1: pcmcia_vs1-pins { + function = "pcmcia_vs1"; + pins = "gpio24"; + }; + + pinctrl_pcmcia_vs2: pcmcia_vs2-pins { + function = "pcmcia_vs2"; + pins = "gpio25"; + }; + }; + + pinctrl_ebi_cs2: ebi_cs2-pins { + function = "ebi_cs2"; + pins = "gpio26"; + }; + + pinctrl_ebi_cs3: ebi_cs3-pins { + function = "ebi_cs3"; + pins = "gpio27"; + }; + + pinctrl_spi_cs2: spi_cs2-pins { + function = "spi_cs2"; + pins = "gpio28"; + }; + + pinctrl_spi_cs3: spi_cs3-pins { + function = "spi_cs3"; + pins = "gpio29"; + }; + + pinctrl_spi_cs4: spi_cs4-pins { + function = "spi_cs4"; + pins = "gpio30"; + }; + + pinctrl_spi_cs5: spi_cs5-pins { + function = "spi_cs5"; + pins = "gpio31"; + }; + + pinctrl_uart1: uart1-pins { + function = "uart1"; + group = "uart1_grp"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml new file mode 100644 index 000000000..b85819fbb --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom CRU + +maintainers: + - Rafał Miłecki + +description: | + Broadcom CRU ("Clock and Reset Unit" or "Central Resource Unit") is a hardware + block grouping smaller blocks. On Broadcom Northstar platform it contains e.g. + clocks, pinctrl, USB PHY and thermal. + +properties: + compatible: + items: + - enum: + - brcm,ns-cru + - const: simple-mfd + + reg: + description: CRU registers + + ranges: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +patternProperties: + '^clock-controller@[a-f0-9]+$': + $ref: ../clock/brcm,iproc-clocks.yaml + + '^phy@[a-f0-9]+$': + $ref: ../phy/bcm-ns-usb2-phy.yaml + + '^pinctrl@[a-f0-9]+$': + $ref: ../pinctrl/brcm,ns-pinmux.yaml + + '^syscon@[a-f0-9]+$': + $ref: syscon.yaml + + '^thermal@[a-f0-9]+$': + $ref: ../thermal/brcm,ns-thermal.yaml + +additionalProperties: false + +required: + - reg + +examples: + - | + #include + cru-bus@1800c100 { + compatible = "brcm,ns-cru", "simple-mfd"; + reg = <0x1800c100 0x1d0>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + clock-controller@100 { + #clock-cells = <1>; + compatible = "brcm,nsp-lcpll0"; + reg = <0x100 0x14>; + clocks = <&osc>; + clock-output-names = "lcpll0", "pcie_phy", "sdio", "ddr_phy"; + }; + + clock-controller@140 { + #clock-cells = <1>; + compatible = "brcm,nsp-genpll"; + reg = <0x140 0x24>; + clocks = <&osc>; + clock-output-names = "genpll", "phy", "ethernetclk", "usbclk", + "iprocfast", "sata1", "sata2"; + }; + + phy@164 { + compatible = "brcm,ns-usb2-phy"; + reg = <0x164 0x4>; + brcm,syscon-clkset = <&clkset>; + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; + clock-names = "phy-ref-clk"; + #phy-cells = <0>; + }; + + clkset: syscon@180 { + compatible = "brcm,cru-clkset", "syscon"; + reg = <0x180 0x4>; + }; + + pinctrl@1c0 { + compatible = "brcm,bcm4708-pinmux"; + reg = <0x1c0 0x24>; + reg-names = "cru_gpio_control"; + }; + + thermal@2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt new file mode 100644 index 000000000..82f82e069 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt @@ -0,0 +1,16 @@ +Broadcom iProc Chip Device Resource Unit (CDRU) + +Various Broadcom iProc SoCs have a set of registers that provide various +chip specific device and resource configurations. This node allows access to +these CDRU registers via syscon. + +Required properties: +- compatible: should contain: + "brcm,sr-cdru", "syscon" for Stingray +- reg: base address and range of the CDRU registers + +Example: + cdru: syscon@6641d000 { + compatible = "brcm,sr-cdru", "syscon"; + reg = <0 0x6641d000 0 0x400>; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt new file mode 100644 index 000000000..4421e9771 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt @@ -0,0 +1,18 @@ +Broadcom iProc Multi Host Bridge (MHB) + +Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls +the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint +interface; 3) access to the Nitro (network processing) engine + +This node allows access to these MHB registers via syscon. + +Required properties: +- compatible: should contain: + "brcm,sr-mhb", "syscon" for Stingray +- reg: base address and range of the MHB registers + +Example: + mhb: syscon@60401000 { + compatible = "brcm,sr-mhb", "syscon"; + reg = <0 0x60401000 0 0x38c>; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,misc.yaml b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml new file mode 100644 index 000000000..cff7d772a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,misc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom's MISC block + +maintainers: + - Rafał Miłecki + +description: | + Broadcom's MISC is a hardware block used on some SoCs (e.g. bcm63xx and + bcm4908). It's used to implement some simple functions like a watchdog, PCIe + reset, UniMAC control and more. + +properties: + compatible: + items: + - const: brcm,misc + - const: simple-mfd + + reg: + description: MISC block registers + + ranges: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +patternProperties: + '^reset-controller@[a-f0-9]+$': + $ref: ../reset/brcm,bcm4908-misc-pcie-reset.yaml + +additionalProperties: false + +required: + - reg + - '#address-cells' + - '#size-cells' + +examples: + - | + misc@ff802600 { + compatible = "brcm,misc", "simple-mfd"; + reg = <0xff802600 0xe4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xe4>; + + reset-controller@44 { + compatible = "brcm,bcm4908-misc-pcie-reset"; + reg = <0x44 0x4>; + #reset-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,twd.yaml b/Documentation/devicetree/bindings/mfd/brcm,twd.yaml new file mode 100644 index 000000000..634526f79 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,twd.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,twd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom's Timer-Watchdog (aka TWD) + +maintainers: + - Rafał Miłecki + +description: | + Broadcom has a Timer-Watchdog block used in multiple SoCs (e.g., BCM4908, + BCM63xx, BCM7038). There are few variants available (they differ slightly in + registers layout). This block consists of: timers, watchdog and optionally a + software reset handler. + +properties: + compatible: + items: + - enum: + - brcm,bcm4908-twd + - brcm,bcm7038-twd + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + ranges: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +patternProperties: + '^watchdog@[a-f0-9]+$': + $ref: /schemas/watchdog/brcm,bcm7038-wdt.yaml + +additionalProperties: false + +required: + - reg + +examples: + - | + timer-mfd@ff800400 { + compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; + reg = <0xff800400 0x4c>; + ranges = <0x00000000 0xff800400 0x4c>; + + #address-cells = <1>; + #size-cells = <1>; + + watchdog@28 { + compatible = "brcm,bcm7038-wdt"; + reg = <0x28 0x8>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml new file mode 100644 index 000000000..e2046f07a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/canaan,k210-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Canaan Kendryte K210 System Controller + +maintainers: + - Damien Le Moal + +description: + Canaan Inc. Kendryte K210 SoC system controller which provides a + register map for controlling the clocks, reset signals and pin power + domains of the SoC. + +properties: + compatible: + items: + - const: canaan,k210-sysctl + - const: syscon + - const: simple-mfd + + clocks: + maxItems: 1 + description: + System controller Advanced Power Bus (APB) interface clock source. + + clock-names: + items: + - const: pclk + + reg: + maxItems: 1 + + clock-controller: + # Child node + type: object + $ref: "../clock/canaan,k210-clk.yaml" + description: + Clock controller for the SoC clocks. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml. + + reset-controller: + # Child node + type: object + $ref: "../reset/canaan,k210-rst.yaml" + description: + Reset controller for the SoC. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml. + + syscon-reboot: + # Child node + type: object + $ref: "../power/reset/syscon-reboot.yaml" + description: + Reboot method for the SoC. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml. + +required: + - compatible + - clocks + - reg + - clock-controller + +additionalProperties: false + +examples: + - | + #include + #include + + clocks { + in0: oscllator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + }; + + sysctl: syscon@50440000 { + compatible = "canaan,k210-sysctl", + "syscon", "simple-mfd"; + reg = <0x50440000 0x100>; + clocks = <&sysclk K210_CLK_APB1>; + clock-names = "pclk"; + + sysclk: clock-controller { + #clock-cells = <1>; + compatible = "canaan,k210-clk"; + clocks = <&in0>; + }; + + sysrst: reset-controller { + compatible = "canaan,k210-rst"; + #reset-cells = <1>; + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&sysctl>; + offset = <48>; + mask = <1>; + value = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml new file mode 100644 index 000000000..ebbedabb2 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml @@ -0,0 +1,365 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/cirrus,lochnagar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Lochnagar Audio Development Board + +maintainers: + - patches@opensource.cirrus.com + +description: | + Lochnagar is an evaluation and development board for Cirrus Logic + Smart CODEC and Amp devices. It allows the connection of most Cirrus + Logic devices on mini-cards, as well as allowing connection of + various application processor systems to provide a full evaluation + platform. Audio system topology, clocking and power can all be + controlled through the Lochnagar, allowing the device under test + to be used in a variety of possible use cases. + + Also see these documents for generic binding information: + [1] GPIO : ../gpio/gpio.txt + + And these for relevant defines: + [2] include/dt-bindings/pinctrl/lochnagar.h + [3] include/dt-bindings/clock/lochnagar.h + + And these documents for the required sub-node binding details: + [4] Clock: ../clock/cirrus,lochnagar.yaml + [5] Pinctrl: ../pinctrl/cirrus,lochnagar.yaml + [6] Sound: ../sound/cirrus,lochnagar.yaml + [7] Hardware Monitor: ../hwmon/cirrus,lochnagar.yaml + +allOf: + - if: + properties: + compatible: + enum: + - cirrus,lochnagar2 + then: + properties: + lochnagar-hwmon: + type: object + $ref: /schemas/hwmon/cirrus,lochnagar.yaml# + + lochnagar-sc: + type: object + $ref: /schemas/sound/cirrus,lochnagar.yaml# + +properties: + compatible: + enum: + - cirrus,lochnagar1 + - cirrus,lochnagar2 + + reg: + const: 0x22 + + reset-gpios: + maxItems: 1 + + present-gpios: + description: | + Host present line, indicating the presence of a + host system, see [1]. This can be omitted if the present line is + tied in hardware. + maxItems: 1 + + lochnagar-clk: + type: object + $ref: /schemas/clock/cirrus,lochnagar.yaml# + + lochnagar-pmic32k: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 32768 + + lochnagar-clk12m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 12288000 + + lochnagar-clk11m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 11298600 + + lochnagar-clk24m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 24576000 + + lochnagar-clk22m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 22579200 + + lochnagar-clk8m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 8192000 + + lochnagar-usb24m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 24576000 + + lochnagar-usb12m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 12288000 + + pinctrl: + type: object + $ref: /schemas/pinctrl/cirrus,lochnagar.yaml# + + lochnagar-hwmon: + type: object + $ref: /schemas/hwmon/cirrus,lochnagar.yaml# + + lochnagar-sc: + type: object + $ref: /schemas/sound/cirrus,lochnagar.yaml# + + VDDCORE: + description: + Initialisation data for the VDDCORE regulator, which supplies the + CODECs digital core if not being provided by an internal regulator. + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + properties: + compatible: + enum: + - cirrus,lochnagar2-vddcore + + SYSVDD-supply: + description: + Primary power supply for the Lochnagar. + required: + - compatible + + MICVDD: + description: + Initialisation data for the MICVDD regulator, which supplies the + CODECs MICVDD. + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + properties: + compatible: + enum: + - cirrus,lochnagar2-micvdd + + SYSVDD-supply: + description: + Primary power supply for the Lochnagar. + required: + - compatible + + MIC1VDD: + description: + Initialisation data for the MIC1VDD supplies. + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + properties: + compatible: + enum: + - cirrus,lochnagar2-mic1vdd + + cirrus,micbias-input: + description: + A property selecting which of the CODEC minicard micbias outputs + should be used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + + MICBIAS1-supply: + description: + Regulator supplies for the MIC1VDD outputs, supplying the digital + microphones, normally supplied from the attached CODEC. + required: + - compatible + + MIC2VDD: + description: + Initialisation data for the MIC2VDD supplies. + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + properties: + compatible: + enum: + - cirrus,lochnagar2-mic2vdd + + cirrus,micbias-input: + description: + A property selecting which of the CODEC minicard micbias outputs + should be used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + + MICBIAS2-supply: + description: + Regulator supplies for the MIC2VDD outputs, supplying the digital + microphones, normally supplied from the attached CODEC. + required: + - compatible + + VDD1V8: + description: + Recommended fixed regulator for the VDD1V8 regulator, which supplies + the CODECs analog and 1.8V digital supplies. + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + properties: + compatible: + enum: + - regulator-fixed + + regulator-min-microvolt: + const: 1800000 + + regulator-max-microvolt: + const: 1800000 + + vin-supply: + description: + Should be set to same supply as SYSVDD + required: + - compatible + - regulator-min-microvolt + - regulator-max-microvolt + - regulator-boot-on + - regulator-always-on + - vin-supply + +required: + - compatible + - reg + - reset-gpios + - lochnagar-clk + - pinctrl + +additionalProperties: false + +examples: + - | + #include + #include + i2c@e0004000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0004000 0x1000>; + + lochnagar: lochnagar@22 { + compatible = "cirrus,lochnagar2"; + reg = <0x22>; + + reset-gpios = <&gpio0 55 0>; + present-gpios = <&gpio0 60 0>; + + lochnagarclk: lochnagar-clk { + compatible = "cirrus,lochnagar2-clk"; + + #clock-cells = <1>; + clocks = <&clkaudio>, <&clkpmic>; + clock-names = "ln-gf-mclk2", "ln-pmic-32k"; + + assigned-clocks = <&lochnagarclk LOCHNAGAR_CDC_MCLK1>, + <&lochnagarclk LOCHNAGAR_CDC_MCLK2>; + assigned-clock-parents = <&clkaudio>, <&clkpmic>; + }; + + clkpmic: lochnagar-pmic32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + pinctrl { + compatible = "cirrus,lochnagar-pinctrl"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinsettings>; + + pinsettings: pin-settings { + ap2aif-pins { + input-enable; + groups = "gf-aif1"; + function = "codec-aif3"; + }; + codec2aif-pins { + output-enable; + groups = "codec-aif3"; + function = "gf-aif1"; + }; + }; + }; + + lochnagar-sc { + compatible = "cirrus,lochnagar2-soundcard"; + + #sound-dai-cells = <1>; + + clocks = <&lochnagarclk LOCHNAGAR_SOUNDCARD_MCLK>; + clock-names = "mclk"; + }; + + lochnagar-hwmon { + compatible = "cirrus,lochnagar2-hwmon"; + }; + + MIC1VDD { + compatible = "cirrus,lochnagar2-mic1vdd"; + + cirrus,micbias-input = <3>; + }; + + MICVDD { + compatible = "cirrus,lochnagar2-micvdd"; + + SYSVDD-supply = <&wallvdd>; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + VDD1V8 { + compatible = "regulator-fixed"; + + regulator-name = "VDD1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + + vin-supply = <&wallvdd>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml new file mode 100644 index 000000000..68c75a517 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml @@ -0,0 +1,297 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/cirrus,madera.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Madera class audio CODECs Multi-Functional Device + +maintainers: + - patches@opensource.cirrus.com + +description: | + These devices are audio SoCs with extensive digital capabilities and a range + of analogue I/O. + + See also the child driver bindings in: + + bindings/pinctrl/cirrus,madera.yaml + bindings/regulator/wlf,arizona.yaml + bindings/sound/cirrus,madera.yaml + +allOf: + - $ref: /schemas/pinctrl/cirrus,madera.yaml# + - $ref: /schemas/regulator/wlf,arizona.yaml# + - $ref: /schemas/sound/cirrus,madera.yaml# + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l85 + - wlf,wm1840 + then: + properties: + SPKVDDL-supply: + description: + Left speaker driver power supply. + + SPKVDDR-supply: + description: + Right speaker driver power supply. + + required: + - SPKVDDL-supply + - SPKVDDR-supply + else: + required: + - DCVDD-supply + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l15 + - cirrus,cs47l35 + then: + properties: + SPKVDD-supply: + description: + Mono speaker driver power supply. + + required: + - SPKVDD-supply + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l35 + - cirrus,cs47l85 + - cirrus,cs47l90 + - cirrus,cs47l91 + - wlf,wm1840 + then: + properties: + DBVDD2-supply: + description: + Databus power supply. + + required: + - DBVDD2-supply + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l85 + - cirrus,cs47l90 + - cirrus,cs47l91 + - wlf,wm1840 + then: + properties: + DBVDD3-supply: + description: + Databus power supply. + + DBVDD4-supply: + description: + Databus power supply. + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l15 + then: + required: + - MICVDD-supply + else: + properties: + CPVDD2-supply: + description: + Secondary charge pump power supply. + + required: + - CPVDD2-supply + +properties: + compatible: + enum: + - cirrus,cs47l15 + - cirrus,cs47l35 + - cirrus,cs47l85 + - cirrus,cs47l90 + - cirrus,cs47l91 + - cirrus,cs42l92 + - cirrus,cs47l92 + - cirrus,cs47l93 + - cirrus,wm1840 + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the pin number. The second cell is reserved for + future use and must be zero + const: 2 + + interrupt-controller: true + + '#interrupt-cells': + description: + The first cell is the IRQ number. + The second cell is the flags, encoded as the trigger masks from + bindings/interrupt-controller/interrupts.txt + const: 2 + + interrupts: + maxItems: 1 + + reset-gpios: + description: + One entry specifying the GPIO controlling /RESET. As defined in + bindings/gpio.txt. Although optional, it is strongly recommended + to use a hardware reset. + maxItems: 1 + + clocks: + description: + Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3. + minItems: 1 + maxItems: 3 + + clock-names: + description: | + May contain up to three strings: + "mclk1" For the clock supplied on MCLK1, recommended to be a + high quality audio reference clock. + "mclk2" For the clock supplied on MCLK2, required to be an + always on 32k clock. + "mclk3" For the clock supplied on MCLK3. + oneOf: + - items: + - const: mclk1 + - items: + - const: mclk2 + - items: + - const: mclk3 + - items: + - const: mclk1 + - const: mclk2 + - items: + - const: mclk1 + - const: mclk3 + - items: + - const: mclk2 + - const: mclk3 + - items: + - const: mclk1 + - const: mclk2 + - const: mclk3 + + AVDD-supply: + description: + Analogue power supply. + + DBVDD1-supply: + description: + Databus power supply. + + CPVDD1-supply: + description: + Charge pump power supply. + + DCVDD-supply: + description: + Digital power supply, optional on CS47L85, WM1840 where it can + be supplied internally. + + MICVDD-supply: + description: + Microphone power supply, normally supplied internally except on + cs47l24, wm1831 where it is mandatory. + +required: + - compatible + - gpio-controller + - '#gpio-cells' + - interrupt-controller + - '#interrupt-cells' + - interrupts + - AVDD-supply + - DBVDD1-supply + - CPVDD1-supply + +unevaluatedProperties: false + +examples: + - | + #include + i2c@e0004000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0004000 0x1000>; + + cs47l85: codec@1a { + compatible = "cirrus,cs47l85"; + reg = <0x1a>; + + reset-gpios = <&gpio 0>; + wlf,ldoena = <&gpio 1>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <4 1 0>; + + gpio-controller; + #gpio-cells = <2>; + + AVDD-supply = <&vdd1v8>; + DBVDD1-supply = <&vdd1v8>; + DBVDD2-supply = <&vdd1v8>; + DBVDD3-supply = <&vdd1v8>; + DBVDD4-supply = <&vdd1v8>; + CPVDD1-supply = <&vdd1v8>; + CPVDD2-supply = <&vdd1v2>; + SPKVDDL-supply = <&vdd5v>; + SPKVDDR-supply = <&vdd5v>; + + clocks = <&clks 0>, <&clks 1>, <&clks 2>; + clock-names = "mclk1", "mclk2", "mclk3"; + + cirrus,dmic-ref = <0 0 MADERA_DMIC_REF_MICBIAS1>; + cirrus,inmode = < + MADERA_INMODE_SE MADERA_INMODE_SE + MADERA_INMODE_SE MADERA_INMODE_SE + MADERA_INMODE_DIFF MADERA_INMODE_DIFF + >; + cirrus,max-channels-clocked = <2 0 0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinsettings>; + + pinsettings: pin-settings { + aif1-pins { + groups = "aif1"; + function = "aif1"; + bias-bus-hold; + }; + + aif2-pins { + groups = "aif2"; + function = "aif2"; + bias-bus-hold; + }; + + aif3-pins { + groups = "aif3"; + function = "aif3"; + bias-bus-hold; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt new file mode 100644 index 000000000..07c69c0c6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt @@ -0,0 +1,67 @@ +* Dialog DA9052/53 Power Management Integrated Circuit (PMIC) + +Required properties: +- compatible : Should be "dlg,da9052", "dlg,da9053-aa", + "dlg,da9053-ab", or "dlg,da9053-bb" + +Optional properties: +- dlg,tsi-as-adc : Boolean, if set the X+, X-, Y+, Y- touchscreen + input lines are used as general purpose analogue + input. +- tsiref-supply: Phandle to the regulator, which provides the reference + voltage for the TSIREF pin. Must be provided when the + touchscreen pins are used for ADC purposes. + +Sub-nodes: +- regulators : Contain the regulator nodes. The DA9052/53 regulators are + bound using their names as listed below: + + buck1 : regulator BUCK CORE + buck2 : regulator BUCK PRO + buck3 : regulator BUCK MEM + buck4 : regulator BUCK PERI + ldo1 : regulator LDO1 + ldo2 : regulator LDO2 + ldo3 : regulator LDO3 + ldo4 : regulator LDO4 + ldo5 : regulator LDO5 + ldo6 : regulator LDO6 + ldo7 : regulator LDO7 + ldo8 : regulator LDO8 + ldo9 : regulator LDO9 + ldo10 : regulator LDO10 + + The bindings details of individual regulator device can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt + +Examples: + +i2c@63fc8000 { /* I2C1 */ + + pmic: dialog@48 { + compatible = "dlg,da9053-aa"; + reg = <0x48>; + + regulators { + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + }; + + buck2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + }; + + buck3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + }; + + buck4 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/da9055.txt b/Documentation/devicetree/bindings/mfd/da9055.txt new file mode 100644 index 000000000..131a53283 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/da9055.txt @@ -0,0 +1,70 @@ +* Dialog DA9055 Power Management Integrated Circuit (PMIC) + +DA9055 consists of a large and varied group of sub-devices (I2C Only): + +Device Supply Names Description +------ ------------ ----------- +da9055-gpio : : GPIOs +da9055-regulator : : Regulators +da9055-onkey : : On key +da9055-rtc : : RTC +da9055-hwmon : : ADC +da9055-watchdog : : Watchdog + +The CODEC device in DA9055 has a separate, configurable I2C address and so +is instantiated separately from the PMIC. + +For details on accompanying CODEC I2C device, see the following: +Documentation/devicetree/bindings/sound/da9055.txt + +====== + +Required properties: +- compatible : Should be "dlg,da9055-pmic" +- reg: Specifies the I2C slave address (defaults to 0x5a but can be modified) +- interrupts: IRQ line info for da9055 chip. +- interrupt-controller: da9055 has internal IRQs (has own IRQ domain). +- #interrupt-cells: Should be 1, is the local IRQ number for da9055. + +Sub-nodes: +- regulators : Contain the regulator nodes. The DA9055 regulators are + bound using their names as listed below: + + buck1 : regulator BUCK1 + buck2 : regulator BUCK2 + ldo1 : regulator LDO1 + ldo2 : regulator LDO2 + ldo3 : regulator LDO3 + ldo4 : regulator LDO4 + ldo5 : regulator LDO5 + ldo6 : regulator LDO6 + + The bindings details of individual regulator device can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt + + +Example: + + pmic: da9055-pmic@5a { + compatible = "dlg,da9055-pmic"; + reg = <0x5a>; + interrupt-parent = <&intc>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + buck1: BUCK1 { + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <2075000>; + }; + buck2: BUCK2 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + }; + ldo1: LDO1 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt new file mode 100644 index 000000000..bab0d0e66 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/da9062.txt @@ -0,0 +1,123 @@ +* Dialog DA9062 Power Management Integrated Circuit (PMIC) + +Product information for the DA9062 and DA9061 devices can be found here: +- https://www.dialog-semiconductor.com/products/da9062 +- https://www.dialog-semiconductor.com/products/da9061 + +The DA9062 PMIC consists of: + +Device Supply Names Description +------ ------------ ----------- +da9062-regulator : : LDOs & BUCKs +da9062-rtc : : Real-Time Clock +da9062-onkey : : On Key +da9062-watchdog : : Watchdog Timer +da9062-thermal : : Thermal +da9062-gpio : : GPIOs + +The DA9061 PMIC consists of: + +Device Supply Names Description +------ ------------ ----------- +da9062-regulator : : LDOs & BUCKs +da9062-onkey : : On Key +da9062-watchdog : : Watchdog Timer +da9062-thermal : : Thermal + +====== + +Required properties: + +- compatible : Should be + "dlg,da9062" for DA9062 + "dlg,da9061" for DA9061 +- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be + modified to match the chip's OTP settings). +- interrupts : IRQ line information. +- interrupt-controller + +See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for +further information on IRQ bindings. + +Optional properties: + +- gpio-controller : Marks the device as a gpio controller. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify the gpio polarity. + +See Documentation/devicetree/bindings/gpio/gpio.txt for further information on +GPIO bindings. + +Sub-nodes: + +- regulators : This node defines the settings for the LDOs and BUCKs. + The DA9062 regulators are bound using their names listed below: + + buck1 : BUCK_1 + buck2 : BUCK_2 + buck3 : BUCK_3 + buck4 : BUCK_4 + ldo1 : LDO_1 + ldo2 : LDO_2 + ldo3 : LDO_3 + ldo4 : LDO_4 + + The DA9061 regulators are bound using their names listed below: + + buck1 : BUCK_1 + buck2 : BUCK_2 + buck3 : BUCK_3 + ldo1 : LDO_1 + ldo2 : LDO_2 + ldo3 : LDO_3 + ldo4 : LDO_4 + + The component follows the standard regulator framework and the bindings + details of individual regulator device can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt + + regulator-initial-mode may be specified for buck regulators using mode values + from include/dt-bindings/regulator/dlg,da9063-regulator.h. + +- rtc : This node defines settings required for the Real-Time Clock associated + with the DA9062. There are currently no entries in this binding, however + compatible = "dlg,da9062-rtc" should be added if a node is created. + +- onkey : See ../input/da9062-onkey.txt + +- watchdog: See ../watchdog/da9062-watchdog.txt + +- thermal : See ../thermal/da9062-thermal.txt + +Example: + + pmic0: da9062@58 { + compatible = "dlg,da9062"; + reg = <0x58>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9062-rtc"; + }; + + regulators { + DA9062_BUCK1: buck1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <2000000>; + regulator-initial-mode = ; + regulator-boot-on; + }; + DA9062_LDO1: ldo1 { + regulator-name = "LDO_1"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + regulator-boot-on; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/mfd/da9150.txt b/Documentation/devicetree/bindings/mfd/da9150.txt new file mode 100644 index 000000000..f09b41fbd --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/da9150.txt @@ -0,0 +1,60 @@ +Dialog Semiconductor DA9150 Combined Charger/Fuel-Gauge MFD bindings + +DA9150 consists of a group of sub-devices: + +Device Description +------ ----------- +da9150-gpadc : General Purpose ADC +da9150-charger : Battery Charger +da9150-fg : Battery Fuel-Gauge + +====== + +Required properties: +- compatible : Should be "dlg,da9150" +- reg: Specifies the I2C slave address +- interrupts: IRQ line info for da9150 chip. +- interrupt-controller: da9150 has internal IRQs (own IRQ domain). + (See ../interrupt-controller/interrupts.txt for + further information relating to interrupt properties) + +Sub-devices: +- da9150-gpadc: See ../iio/adc/da9150-gpadc.txt +- da9150-charger: See ../power/da9150-charger.txt +- da9150-fg: See ../power/da9150-fg.txt + +Example: + + charger_fg: da9150@58 { + compatible = "dlg,da9150"; + reg = <0x58>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + gpadc: da9150-gpadc { + compatible = "dlg,da9150-gpadc"; + #io-channel-cells = <1>; + }; + + charger { + compatible = "dlg,da9150-charger"; + + io-channels = <&gpadc 0>, + <&gpadc 2>, + <&gpadc 8>, + <&gpadc 5>; + io-channel-names = "CHAN_IBUS", + "CHAN_VBUS", + "CHAN_TJUNC", + "CHAN_VBAT"; + }; + + fuel-gauge { + compatible = "dlg,da9150-fuel-gauge"; + + dlg,update-interval = <10000>; + dlg,warn-soc-level = /bits/ 8 <15>; + dlg,crit-soc-level = /bits/ 8 <5> + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml new file mode 100644 index 000000000..f6967c1f6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/delta,tn48m-cpld.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Delta Networks TN48M CPLD controller + +maintainers: + - Robert Marko + +description: | + Lattice CPLD onboard the TN48M switches is used for system + management. + + It provides information about the hardware model, revision, + PSU status etc. + + It is also being used as a GPIO expander and reset controller + for the switch MAC-s and other peripherals. + +properties: + compatible: + const: delta,tn48m-cpld + + reg: + description: + I2C device address. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +patternProperties: + "^gpio(@[0-9a-f]+)?$": + $ref: ../gpio/delta,tn48m-gpio.yaml + + "^reset-controller?$": + $ref: ../reset/delta,tn48m-reset.yaml + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + cpld@41 { + compatible = "delta,tn48m-cpld"; + reg = <0x41>; + #address-cells = <1>; + #size-cells = <0>; + + gpio@31 { + compatible = "delta,tn48m-gpo"; + reg = <0x31>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@3a { + compatible = "delta,tn48m-gpi"; + reg = <0x3a>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@40 { + compatible = "delta,tn48m-gpi"; + reg = <0x40>; + gpio-controller; + #gpio-cells = <2>; + }; + + reset-controller { + compatible = "delta,tn48m-reset"; + #reset-cells = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml new file mode 100644 index 000000000..e8e74e910 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) + +maintainers: + - Steve Twiss + +description: | + For device-tree bindings of other sub-modules refer to the binding documents + under the respective sub-system directories. + +properties: + compatible: + enum: + - dlg,da9063 + - dlg,da9063l + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + dlg,use-sw-pm: + type: boolean + description: + Disable the watchdog during suspend. + Only use this option if you can't use the watchdog automatic suspend + function during a suspend (see register CONTROL_B). + + watchdog: + type: object + $ref: /schemas/watchdog/watchdog.yaml# + unevaluatedProperties: false + properties: + compatible: + const: dlg,da9063-watchdog + + rtc: + type: object + $ref: /schemas/rtc/rtc.yaml# + unevaluatedProperties: false + properties: + compatible: + const: dlg,da9063-rtc + + onkey: + type: object + $ref: /schemas/input/input.yaml# + unevaluatedProperties: false + properties: + compatible: + const: dlg,da9063-onkey + + dlg,disable-key-power: + type: boolean + description: | + Disable power-down using a long key-press. + If this entry does not exist then by default the key-press triggered + power down is enabled and the OnKey will support both KEY_POWER and + KEY_SLEEP. + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + #interrupt-cells = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + watchdog { + compatible = "dlg,da9063-watchdog"; + }; + + onkey { + compatible = "dlg,da9063-onkey"; + dlg,disable-key-power; + }; + + regulators { + bcore1 { + regulator-name = "BCORE1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <2000000>; + regulator-boot-on; + }; + ldo11 { + regulator-name = "LDO_11"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + regulator-boot-on; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml new file mode 100644 index 000000000..08af356f5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ene-kb3930.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ENE KB3930 Embedded Controller bindings + +description: | + This binding describes the ENE KB3930 Embedded Controller attached to an + I2C bus. + +maintainers: + - Lubomir Rintel + +properties: + compatible: + items: + - enum: + - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020) + - const: ene,kb3930 + reg: + maxItems: 1 + + off-gpios: + description: GPIO used with the shutdown protocol on Ariel + maxItems: 2 + + system-power-controller: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + embedded-controller@58 { + compatible = "dell,wyse-ariel-ec", "ene,kb3930"; + reg = <0x58>; + system-power-controller; + + off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>, + <&gpio 127 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/ene-kb930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb930.yaml new file mode 100644 index 000000000..06ed9ec8f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ene-kb930.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ene-kb930.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ENE KB930 Embedded Controller bindings + +description: | + This binding describes the ENE KB930 Embedded Controller attached to an + I2C bus. + +maintainers: + - Dmitry Osipenko + +properties: + compatible: + items: + - enum: + - acer,a500-iconia-ec # Acer A500 Iconia tablet device + - const: ene,kb930 + reg: + maxItems: 1 + + monitored-battery: true + power-supplies: true + system-power-controller: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + battery: battery-cell { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3260000>; + energy-full-design-microwatt-hours = <24000000>; + operating-range-celsius = <0 40>; + }; + + mains: ac-adapter { + compatible = "gpio-charger"; + charger-type = "mains"; + gpios = <&gpio 125 0>; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + embedded-controller@58 { + compatible = "acer,a500-iconia-ec", "ene,kb930"; + reg = <0x58>; + + system-power-controller; + + monitored-battery = <&battery>; + power-supplies = <&mains>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml new file mode 100644 index 000000000..f09577105 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml @@ -0,0 +1,192 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qm/qxp Control and Status Registers Module Bindings + +maintainers: + - Liu Ying + +description: | + As a system controller, the Freescale i.MX8qm/qxp Control and Status + Registers(CSR) module represents a set of miscellaneous registers of a + specific subsystem. It may provide control and/or status report interfaces + to a mix of standalone hardware devices within that subsystem. One typical + use-case is for some other nodes to acquire a reference to the syscon node + by phandle, and the other typical use-case is that the operating system + should consider all subnodes of the CSR module as separate child devices. + +properties: + $nodename: + pattern: "^syscon@[0-9a-f]+$" + + compatible: + items: + - enum: + - fsl,imx8qxp-mipi-lvds-csr + - fsl,imx8qm-lvds-csr + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: ipg + +patternProperties: + "^(ldb|phy|pxl2dpi)$": + type: object + description: The possible child devices of the CSR module. + +required: + - compatible + - reg + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8qxp-mipi-lvds-csr + then: + required: + - pxl2dpi + - ldb + + - if: + properties: + compatible: + contains: + const: fsl,imx8qm-lvds-csr + then: + required: + - phy + - ldb + +additionalProperties: false + +examples: + - | + #include + #include + mipi_lvds_0_csr: syscon@56221000 { + compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd"; + reg = <0x56221000 0x1000>; + clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>; + clock-names = "ipg"; + + mipi_lvds_0_pxl2dpi: pxl2dpi { + compatible = "fsl,imx8qxp-pxl2dpi"; + fsl,sc-resource = ; + power-domains = <&pd IMX_SC_R_MIPI_0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 { + reg = <0>; + remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 { + reg = <1>; + remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>; + }; + }; + }; + }; + + mipi_lvds_0_ldb: ldb { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8qxp-ldb"; + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>, + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>; + clock-names = "pixel", "bypass"; + power-domains = <&pd IMX_SC_R_LVDS_0>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + phys = <&mipi_lvds_0_phy>; + phy-names = "lvds_phy"; + + port@0 { + reg = <0>; + + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint { + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>; + }; + }; + + port@1 { + reg = <1>; + + /* ... */ + }; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + phys = <&mipi_lvds_0_phy>; + phy-names = "lvds_phy"; + + port@0 { + reg = <0>; + + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint { + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>; + }; + }; + + port@1 { + reg = <1>; + + /* ... */ + }; + }; + }; + }; + + mipi_lvds_0_phy: phy@56228300 { + compatible = "fsl,imx8qxp-mipi-dphy"; + reg = <0x56228300 0x100>; + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>; + clock-names = "phy_ref"; + #phy-cells = <0>; + fsl,syscon = <&mipi_lvds_0_csr>; + power-domains = <&pd IMX_SC_R_MIPI_0>; + }; diff --git a/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt new file mode 100644 index 000000000..b03505286 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt @@ -0,0 +1,47 @@ +Freescale MX25 ADC/TSC MultiFunction Device (MFD) + +This device combines two general purpose conversion queues one used for general +ADC and the other used for touchscreens. + +Required properties: + - compatible: Should be "fsl,imx25-tsadc". + - reg: Start address and size of the memory area of + the device + - interrupts: Interrupt for this device + (See: ../interrupt-controller/interrupts.txt) + - clocks: An 'ipg' clock (See: ../clock/clock-bindings.txt) + - interrupt-controller: This device is an interrupt controller. It + controls the interrupts of both + conversion queues. + - #interrupt-cells: Should be '<1>'. + - #address-cells: Should be '<1>'. + - #size-cells: Should be '<1>'. + +This device includes two conversion queues which can be added as subnodes. +The first queue is for the touchscreen, the second for general purpose ADC. + +Example: + tscadc: tscadc@50030000 { + compatible = "fsl,imx25-tsadc"; + reg = <0x50030000 0xc>; + interrupts = <46>; + clocks = <&clks 119>; + clock-names = "ipg"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + tsc: tcq@50030400 { + compatible = "fsl,imx25-tcq"; + reg = <0x50030400 0x60>; + ... + }; + + adc: gcq@50030800 { + compatible = "fsl,imx25-gcq"; + reg = <0x50030800 0x60>; + ... + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml new file mode 100644 index 000000000..acb9c5494 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml @@ -0,0 +1,203 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Gateworks System Controller + +description: | + The Gateworks System Controller (GSC) is a device present across various + Gateworks product families that provides a set of system related features + such as the following (refer to the board hardware user manuals to see what + features are present) + - Watchdog Timer + - GPIO + - Pushbutton controller + - Hardware monitor with ADC's for temperature and voltage rails and + fan controller + +maintainers: + - Tim Harvey + +properties: + $nodename: + pattern: "gsc@[0-9a-f]{1,2}" + compatible: + const: gw,gsc + + reg: + description: I2C device address + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + adc: + type: object + additionalProperties: false + description: Optional hardware monitoring module + + properties: + compatible: + const: gw,gsc-adc + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^channel@[0-9a-f]+$": + type: object + additionalProperties: false + description: | + Properties for a single ADC which can report cooked values + (i.e. temperature sensor based on thermister), raw values + (i.e. voltage rail with a pre-scaling resistor divider). + + properties: + reg: + description: Register of the ADC + maxItems: 1 + + label: + description: Name of the ADC input + + gw,mode: + description: | + conversion mode: + 0 - temperature, in C*10 + 1 - pre-scaled 24-bit voltage value + 2 - scaled voltage based on an optional resistor divider + and optional offset + 3 - pre-scaled 16-bit voltage value + 4 - fan tach input to report RPM's + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4] + + gw,voltage-divider-ohms: + description: Values of resistors for divider on raw ADC input + maxItems: 2 + items: + minimum: 1000 + maximum: 1000000 + + gw,voltage-offset-microvolt: + description: | + A positive voltage offset to apply to a raw ADC + (i.e. to compensate for a diode drop). + minimum: 0 + maximum: 1000000 + + required: + - gw,mode + - reg + - label + + required: + - compatible + - "#address-cells" + - "#size-cells" + +patternProperties: + "^fan-controller@[0-9a-f]+$": + type: object + additionalProperties: false + description: Optional fan controller + + properties: + compatible: + const: gw,gsc-fan + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + description: The fan controller base address + maxItems: 1 + + required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { /* A0: Board Temperature */ + reg = <0x00>; + label = "temp"; + gw,mode = <0>; + }; + + channel@2 { /* A1: Input Voltage (raw ADC) */ + reg = <0x02>; + label = "vdd_vin"; + gw,mode = <1>; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <800000>; + }; + + channel@b { /* A2: Battery voltage */ + reg = <0x0b>; + label = "vdd_bat"; + gw,mode = <1>; + }; + }; + + fan-controller@2c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "gw,gsc-fan"; + reg = <0x2c>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml new file mode 100644 index 000000000..04962bb29 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -0,0 +1,225 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/google,cros-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS Embedded Controller + +maintainers: + - Benson Leung + - Guenter Roeck + +description: + Google's ChromeOS EC is a microcontroller which talks to the AP and + implements various functions such as keyboard and battery charging. + The EC can be connected through various interfaces (I2C, SPI, and others) + and the compatible string specifies which interface is being used. + +properties: + compatible: + oneOf: + - description: + For implementations of the EC is connected through I2C. + const: google,cros-ec-i2c + - description: + For implementations of the EC is connected through SPI. + const: google,cros-ec-spi + - description: + For implementations of the EC is connected through RPMSG. + const: google,cros-ec-rpmsg + + controller-data: + description: + SPI controller data, see bindings/spi/samsung,spi-peripheral-props.yaml + type: object + + google,cros-ec-spi-pre-delay: + description: + This property specifies the delay in usecs between the + assertion of the CS and the first clock pulse. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + google,cros-ec-spi-msg-delay: + description: + This property specifies the delay in usecs between messages. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + google,has-vbc-nvram: + description: + Some implementations of the EC include a small nvram space used to + store verified boot context data. This boolean flag is used to specify + whether this nvram is present or not. + type: boolean + + mediatek,rpmsg-name: + description: + Must be defined if the cros-ec is a rpmsg device for a Mediatek + ARM Cortex M4 Co-processor. Contains the name of the rpmsg + device. Used to match the subnode to the rpmsg device announced by + the SCP. + $ref: "/schemas/types.yaml#/definitions/string" + + spi-max-frequency: + description: Maximum SPI frequency of the device in Hz. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wakeup-source: + description: Button can wake-up the system. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + typec: + $ref: "/schemas/chrome/google,cros-ec-typec.yaml#" + + ec-pwm: + $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#" + deprecated: true + + pwm: + $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#" + + kbd-led-backlight: + $ref: "/schemas/chrome/google,cros-kbd-led-backlight.yaml#" + + keyboard-controller: + $ref: "/schemas/input/google,cros-ec-keyb.yaml#" + + proximity: + $ref: "/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#" + + codecs: + type: object + additionalProperties: false + + properties: + '#address-cells': + const: 2 + + '#size-cells': + const: 1 + + patternProperties: + "^ec-codec@[a-f0-9]+$": + type: object + $ref: "/schemas/sound/google,cros-ec-codec.yaml#" + + required: + - "#address-cells" + - "#size-cells" + + cbas: + type: object + + description: + This device is used to signal when a detachable base is attached + to a Chrome OS tablet. This device cannot be detected at runtime. + + properties: + compatible: + const: google,cros-cbas + + required: + - compatible + + additionalProperties: false + +patternProperties: + "^i2c-tunnel[0-9]*$": + type: object + $ref: "/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#" + + "^regulator@[0-9]+$": + type: object + $ref: "/schemas/regulator/google,cros-ec-regulator.yaml#" + + "^extcon[0-9]*$": + type: object + $ref: "/schemas/extcon/extcon-usbc-cros-ec.yaml#" + +required: + - compatible + +allOf: + - if: + properties: + compatible: + contains: + enum: + - google,cros-ec-i2c + - google,cros-ec-rpmsg + then: + properties: + google,cros-ec-spi-pre-delay: false + google,cros-ec-spi-msg-delay: false + spi-max-frequency: false + else: + $ref: /schemas/spi/spi-peripheral-props.yaml + +additionalProperties: false + +examples: + # Example for I2C + - | + #include + #include + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@1e { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 0>; + interrupt-parent = <&gpio0>; + }; + }; + + # Example for SPI + - | + #include + #include + + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0x0>; + google,cros-ec-spi-msg-delay = <30>; + google,cros-ec-spi-pre-delay = <10>; + interrupts = <99 0>; + interrupt-parent = <&gpio7>; + spi-max-frequency = <5000000>; + + proximity { + compatible = "google,cros-ec-mkbp-proximity"; + }; + + cbas { + compatible = "google,cros-cbas"; + }; + }; + }; + + # Example for RPMSG + - | + scp0 { + cros-ec { + compatible = "google,cros-ec-rpmsg"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/hi6421.txt b/Documentation/devicetree/bindings/mfd/hi6421.txt new file mode 100644 index 000000000..22da96d34 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/hi6421.txt @@ -0,0 +1,40 @@ +* HI6421 Multi-Functional Device (MFD), by HiSilicon Ltd. + +Required parent device properties: +- compatible : One of the following chip-specific strings: + "hisilicon,hi6421-pmic"; + "hisilicon,hi6421v530-pmic"; +- reg : register range space of hi6421; + +Supported Hi6421 sub-devices include: + +Device IRQ Names Supply Names Description +------ --------- ------------ ----------- +regulators : None : None : Regulators + +Required child device properties: +None. + +Example: + hi6421 { + compatible = "hisilicon,hi6421-pmic"; + reg = <0xfcc00000 0x0180>; /* 0x60 << 2 */ + + regulators { + // supply for MLC NAND/ eMMC + hi6421_vout0_reg: hi6421_vout0 { + regulator-name = "VOUT0"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + // supply for 26M Oscillator + hi6421_vout1_reg: hi6421_vout1 { + regulator-name = "VOUT1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml new file mode 100644 index 000000000..22edcb4b2 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon 6421v600 SPMI PMIC + +maintainers: + - Mauro Carvalho Chehab + +description: | + HiSilicon 6421v600 should be connected inside a MIPI System Power Management + (SPMI) bus. It provides interrupts and power supply. + + The GPIO and interrupt settings are represented as part of the top-level PMIC + node. + + The SPMI controller part is provided by + Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml + +properties: + $nodename: + pattern: "pmic@[0-9a-f]" + + compatible: + const: hisilicon,hi6421v600-spmi + + reg: + maxItems: 1 + + '#interrupt-cells': + const: 2 + + interrupt-controller: true + + interrupts: + maxItems: 1 + + regulators: + type: object + + additionalProperties: false + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + '^ldo[0-9]+$': + type: object + + $ref: "/schemas/regulator/regulator.yaml#" + + unevaluatedProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + + pmic: pmic@0 { + compatible = "hisilicon,hi6421v600-spmi"; + reg = <0 0>; + + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio28>; + interrupts = <0 0>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + ldo3: ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + }; + + ldo4: ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + }; + + ldo9: ldo9 { + regulator-name = "ldo9"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo15: ldo15 { + regulator-name = "ldo15"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo16: ldo16 { + regulator-name = "ldo16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + }; + + ldo17: ldo17 { + regulator-name = "ldo17"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + ldo33: ldo33 { + regulator-name = "ldo33"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo34: ldo34 { + regulator-name = "ldo34"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file mode 100644 index 000000000..9630ac0e4 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt @@ -0,0 +1,33 @@ +Hisilicon Hi655x Power Management Integrated Circuit (PMIC) + +The hardware layout for access PMIC Hi655x from AP SoC Hi6220. +Between PMIC Hi655x and Hi6220, the physical signal channel is SSI. +We can use memory-mapped I/O to communicate. + ++----------------+ +-------------+ +| | | | +| Hi6220 | SSI bus | Hi655x | +| |-------------| | +| |(REGMAP_MMIO)| | ++----------------+ +-------------+ + +Required properties: +- compatible: Should be "hisilicon,hi655x-pmic". +- reg: Base address of PMIC on Hi6220 SoC. +- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain). +- pmic-gpios: The GPIO used by PMIC IRQ. +- #clock-cells: From common clock binding; shall be set to 0 + +Optional properties: +- clock-output-names: From common clock binding to override the + default output clock name + +Example: + pmic: pmic@f8000000 { + compatible = "hisilicon,hi655x-pmic"; + reg = <0x0 0xf8000000 0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + #clock-cells = <0>; + } diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Documentation/devicetree/bindings/mfd/iqs62x.yaml new file mode 100644 index 000000000..044cd7542 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml @@ -0,0 +1,179 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/iqs62x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS620A/621/622/624/625 Multi-Function Sensors + +maintainers: + - Jeff LaBundy + +description: | + The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors + integrate multiple sensing technologies in a single package. + + Link to datasheets: https://www.azoteq.com/ + +properties: + compatible: + enum: + - azoteq,iqs620a + - azoteq,iqs621 + - azoteq,iqs622 + - azoteq,iqs624 + - azoteq,iqs625 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + description: + Specifies the name of the calibration and configuration file selected by + the driver. If this property is omitted, the name is chosen based on the + device name with ".bin" as the extension (e.g. iqs620a.bin for IQS620A). + + keys: + $ref: ../input/iqs62x-keys.yaml + + pwm: + $ref: ../pwm/iqs620a-pwm.yaml + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + /* + * Dual capacitive buttons with proximity-activated function, unipolar lid + * switch and panel-mounted LED. + */ + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + iqs620a@44 { + compatible = "azoteq,iqs620a"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + + keys { + compatible = "azoteq,iqs620a-keys"; + + linux,keycodes = , + , + , + ; + + hall-switch-south { + linux,code = ; + azoteq,use-prox; + }; + }; + + iqs620a_pwm: pwm { + compatible = "azoteq,iqs620a-pwm"; + #pwm-cells = <2>; + }; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + + led-1 { + pwms = <&iqs620a_pwm 0 1000000>; + max-brightness = <255>; + }; + }; + + - | + /* Single inductive button with bipolar dock/tablet-mode switch. */ + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + iqs620a@44 { + compatible = "azoteq,iqs620a"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + + firmware-name = "iqs620a_coil.bin"; + + keys { + compatible = "azoteq,iqs620a-keys"; + + linux,keycodes = <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + ; + + hall-switch-north { + linux,code = ; + }; + + hall-switch-south { + linux,code = ; + }; + }; + }; + }; + + - | + /* Dual capacitive buttons with volume knob. */ + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + iqs624@44 { + compatible = "azoteq,iqs624"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + + keys { + compatible = "azoteq,iqs624-keys"; + + linux,keycodes = , + <0>, + , + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + , + ; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml new file mode 100644 index 000000000..084960fd5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/khadas,mcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Khadas on-board Microcontroller + +maintainers: + - Neil Armstrong + +description: | + Khadas embeds a microcontroller on their VIM and Edge boards adding some + system feature as PWM Fan control (for VIM2 rev14 or VIM3), User memory + storage, IR/Key resume control, system power LED control and more. + +properties: + compatible: + enum: + - khadas,mcu # MCU revision is discoverable + + "#cooling-cells": # Only needed for boards having FAN control feature + const: 2 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + khadas_mcu: system-controller@18 { + compatible = "khadas,mcu"; + reg = <0x18>; + #cooling-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml new file mode 100644 index 000000000..eb3b43547 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kontron's sl28cpld board management controller + +maintainers: + - Michael Walle + +description: | + The board management controller may contain different IP blocks like + watchdog, fan monitoring, PWM controller, interrupt controller and a + GPIO controller. + +properties: + compatible: + const: kontron,sl28cpld + + reg: + description: + I2C device address. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + + interrupt-controller: true + +patternProperties: + "^gpio(@[0-9a-f]+)?$": + $ref: ../gpio/kontron,sl28cpld-gpio.yaml + + "^hwmon(@[0-9a-f]+)?$": + $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml + + "^interrupt-controller(@[0-9a-f]+)?$": + $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml + + "^pwm(@[0-9a-f]+)?$": + $ref: ../pwm/kontron,sl28cpld-pwm.yaml + + "^watchdog(@[0-9a-f]+)?$": + $ref: ../watchdog/kontron,sl28cpld-wdt.yaml + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sl28cpld@4a { + compatible = "kontron,sl28cpld"; + reg = <0x4a>; + #address-cells = <1>; + #size-cells = <0>; + + watchdog@4 { + compatible = "kontron,sl28cpld-wdt"; + reg = <0x4>; + kontron,assert-wdt-timeout-pin; + }; + + hwmon@b { + compatible = "kontron,sl28cpld-fan"; + reg = <0xb>; + }; + + pwm@c { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xc>; + #pwm-cells = <2>; + }; + + pwm@e { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xe>; + #pwm-cells = <2>; + }; + + gpio@10 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x10>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "a", "b", "c"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@15 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x15>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@1a { + compatible = "kontron,sl28cpld-gpo"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@1b { + compatible = "kontron,sl28cpld-gpi"; + reg = <0x1b>; + + gpio-controller; + #gpio-cells = <2>; + }; + + interrupt-controller@1c { + compatible = "kontron,sl28cpld-intc"; + reg = <0x1c>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/lp3943.txt b/Documentation/devicetree/bindings/mfd/lp3943.txt new file mode 100644 index 000000000..e8591d6b1 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/lp3943.txt @@ -0,0 +1,33 @@ +TI/National Semiconductor LP3943 MFD driver + +Required properties: + - compatible: "ti,lp3943" + - reg: I2C slave address. From 0x60 to 0x67. + +LP3943 consists of two sub-devices, lp3943-gpio and lp3943-pwm. + +For the LP3943 GPIO properties please refer to: +Documentation/devicetree/bindings/gpio/gpio-lp3943.txt + +For the LP3943 PWM properties please refer to: +Documentation/devicetree/bindings/pwm/pwm-lp3943.txt + +Example: + +lp3943@60 { + compatible = "ti,lp3943"; + reg = <0x60>; + + gpioex: gpio { + compatible = "ti,lp3943-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + pwm3943: pwm { + compatible = "ti,lp3943-pwm"; + #pwm-cells = <2>; + ti,pwm0 = <8 9 10>; + ti,pwm1 = <15>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt new file mode 100644 index 000000000..ae9cf39bd --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/lp873x.txt @@ -0,0 +1,67 @@ +TI LP873X PMIC MFD driver + +Required properties: + - compatible: "ti,lp8732", "ti,lp8733" + - reg: I2C slave address. + - gpio-controller: Marks the device node as a GPIO Controller. + - #gpio-cells: Should be two. The first cell is the pin number and + the second cell is used to specify flags. + See ../gpio/gpio.txt for more information. + - xxx-in-supply: Phandle to parent supply node of each regulator + populated under regulators node. xxx can be + buck0, buck1, ldo0 or ldo1. + - regulators: List of child nodes that specify the regulator + initialization data. +Example: + +pmic: lp8733@60 { + compatible = "ti,lp8733"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + + buck0-in-supply = <&vsys_3v3>; + buck1-in-supply = <&vsys_3v3>; + ldo0-in-supply = <&vsys_3v3>; + ldo1-in-supply = <&vsys_3v3>; + + regulators { + lp8733_buck0: buck0 { + regulator-name = "lp8733-buck0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-min-microamp = <1500000>; + regulator-max-microamp = <4000000>; + regulator-ramp-delay = <10000>; + regulator-always-on; + regulator-boot-on; + }; + + lp8733_buck1: buck1 { + regulator-name = "lp8733-buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-min-microamp = <1500000>; + regulator-max-microamp = <4000000>; + regulator-ramp-delay = <10000>; + regulator-boot-on; + regulator-always-on; + }; + + lp8733_ldo0: ldo0 { + regulator-name = "lp8733-ldo0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + lp8733_ldo1: ldo1 { + regulator-name = "lp8733-ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt new file mode 100644 index 000000000..5a642a51d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max77620.txt @@ -0,0 +1,162 @@ +MAX77620 Power management IC from Maxim Semiconductor. + +Required properties: +------------------- +- compatible: Must be one of + "maxim,max77620" + "maxim,max20024" + "maxim,max77663" +- reg: I2C device address. + +Optional properties: +------------------- +- interrupts: The interrupt on the parent the controller is + connected to. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: is <2> and their usage is compliant to the 2 cells + variant of <../interrupt-controller/interrupts.txt> + IRQ numbers for different interrupt source of MAX77620 + are defined at dt-bindings/mfd/max77620.h. + +- system-power-controller: Indicates that this PMIC is controlling the + system power, see [1] for more details. + +[1] Documentation/devicetree/bindings/power/power-controller.txt + +Optional subnodes and their properties: +======================================= + +Flexible power sequence configurations: +-------------------------------------- +The Flexible Power Sequencer (FPS) allows each regulator to power up under +hardware or software control. Additionally, each regulator can power on +independently or among a group of other regulators with an adjustable power-up +and power-down delays (sequencing). GPIO1, GPIO2, and GPIO3 can be programmed +to be part of a sequence allowing external regulators to be sequenced along +with internal regulators. 32KHz clock can be programmed to be part of a +sequence. + +The flexible sequencing structure consists of two hardware enable inputs +(EN0, EN1), and 3 master sequencing timers called FPS0, FPS1 and FPS2. +Each master sequencing timer is programmable through its configuration +register to have a hardware enable source (EN1 or EN2) or a software enable +source (SW). When enabled/disabled, the master sequencing timer generates +eight sequencing events on different time periods called slots. The time +period between each event is programmable within the configuration register. +Each regulator, GPIO1, GPIO2, GPIO3, and 32KHz clock has a flexible power +sequence slave register which allows its enable source to be specified as +a flexible power sequencer timer or a software bit. When a FPS source of +regulators, GPIOs and clocks specifies the enable source to be a flexible +power sequencer, the power up and power down delays can be specified in +the regulators, GPIOs and clocks flexible power sequencer configuration +registers. + +When FPS event cleared (set to LOW), regulators, GPIOs and 32KHz +clock are set into following state at the sequencing event that +corresponds to its flexible sequencer configuration register. + Sleep state: In this state, regulators, GPIOs + and 32KHz clock get disabled at + the sequencing event. + Global Low Power Mode (GLPM): In this state, regulators are set in + low power mode at the sequencing event. + +The configuration parameters of FPS is provided through sub-node "fps" +and their child for FPS specific. The child node name for FPS are "fps0", +"fps1", and "fps2" for FPS0, FPS1 and FPS2 respectively. + +The FPS configurations like FPS source, power up and power down slots for +regulators, GPIOs and 32kHz clocks are provided in their respective +configuration nodes which is explained in respective sub-system DT +binding document. + +There is need for different FPS configuration parameters based on system +state like when system state changed from active to suspend or active to +power off (shutdown). + +Optional properties: +------------------- +-maxim,fps-event-source: u32, FPS event source like external + hardware input to PMIC i.e. EN0, EN1 or + software (SW). + The macros are defined on + dt-bindings/mfd/max77620.h + for different control source. + - MAX77620_FPS_EVENT_SRC_EN0 + for hardware input pin EN0. + - MAX77620_FPS_EVENT_SRC_EN1 + for hardware input pin EN1. + - MAX77620_FPS_EVENT_SRC_SW + for software control. + +-maxim,shutdown-fps-time-period-us: u32, FPS time period in microseconds + when system enters in to shutdown + state. + +-maxim,suspend-fps-time-period-us: u32, FPS time period in microseconds + when system enters in to suspend state. + +-maxim,device-state-on-disabled-event: u32, describe the PMIC state when FPS + event cleared (set to LOW) whether it + should go to sleep state or low-power + state. Following are valid values: + - MAX77620_FPS_INACTIVE_STATE_SLEEP + to set the PMIC state to sleep. + - MAX77620_FPS_INACTIVE_STATE_LOW_POWER + to set the PMIC state to low + power. + Absence of this property or other value + will not change device state when FPS + event get cleared. + +Here supported time periods by device in microseconds are as follows: +MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds. +MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. +MAX77663 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. + +-maxim,power-ok-control: configure map power ok bit + 1: Enables POK(Power OK) to control nRST_IO and GPIO1 + POK function. + 0: Disables POK control. + if property missing, do not configure MPOK bit. + If POK mapping is enabled for GPIO1/nRST_IO then, + GPIO1/nRST_IO pins are HIGH only if all rails + that have POK control enabled are HIGH. + If any of the rails goes down(which are enabled for POK + control) then, GPIO1/nRST_IO goes LOW. + this property is valid for max20024 only. + +For DT binding details of different sub modules like GPIO, pincontrol, +regulator, power, please refer respective device-tree binding document +under their respective sub-system directories. + +Example: +-------- +#include + +max77620@3c { + compatible = "maxim,max77620"; + reg = <0x3c>; + + interrupt-parent = <&intc>; + interrupts = <0 86 IRQ_TYPE_NONE>; + + interrupt-controller; + #interrupt-cells = <2>; + + fps { + fps0 { + maxim,shutdown-fps-time-period-us = <1280>; + maxim,fps-event-source = ; + }; + + fps1 { + maxim,shutdown-fps-time-period-us = <1280>; + maxim,fps-event-source = ; + }; + + fps2 { + maxim,shutdown-fps-time-period-us = <1280>; + maxim,fps-event-source = ; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml new file mode 100644 index 000000000..b0a0f0d3d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max77650.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/max77650.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX77650 ultra low-power PMIC from Maxim Integrated. + +maintainers: + - Bartosz Golaszewski + +description: | + MAX77650 is an ultra-low power PMIC providing battery charging and power + supply for low-power IoT and wearable applications. + + The GPIO-controller module is represented as part of the top-level PMIC + node. The device exposes a single GPIO line. + + For device-tree bindings of other sub-modules (regulator, power supply, + LEDs and onkey) refer to the binding documents under the respective + sub-system directories. + +properties: + compatible: + const: maxim,max77650 + + reg: + description: + I2C device address. + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + description: + The first cell is the IRQ number, the second cell is the trigger type. + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: + The first cell is the pin number and the second cell is used to specify + the gpio active state. + + gpio-line-names: + maxItems: 1 + description: + Single string containing the name of the GPIO line. + + regulators: + $ref: ../regulator/max77650-regulator.yaml + + charger: + $ref: ../power/supply/max77650-charger.yaml + + leds: + $ref: ../leds/leds-max77650.yaml + + onkey: + $ref: ../input/max77650-onkey.yaml + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@48 { + compatible = "maxim,max77650"; + reg = <0x48>; + + interrupt-controller; + interrupt-parent = <&gpio2>; + #interrupt-cells = <2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "max77650-charger"; + + regulators { + compatible = "maxim,max77650-regulator"; + + max77650_ldo: regulator-ldo { + regulator-compatible = "ldo"; + regulator-name = "max77650-ldo"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <2937500>; + }; + + max77650_sbb0: regulator-sbb0 { + regulator-compatible = "sbb0"; + regulator-name = "max77650-sbb0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1587500>; + }; + }; + + charger { + compatible = "maxim,max77650-charger"; + input-voltage-min-microvolt = <4200000>; + input-current-limit-microamp = <285000>; + }; + + leds { + compatible = "maxim,max77650-led"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "blue:usr0"; + }; + + led@1 { + reg = <1>; + label = "red:usr1"; + linux,default-trigger = "heartbeat"; + }; + + led@2 { + reg = <2>; + label = "green:usr2"; + }; + }; + + onkey { + compatible = "maxim,max77650-onkey"; + linux,code = ; + maxim,onkey-slide; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/max8925.txt b/Documentation/devicetree/bindings/mfd/max8925.txt new file mode 100644 index 000000000..4f0dc6638 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max8925.txt @@ -0,0 +1,64 @@ +* Maxim max8925 Power Management IC + +Required parent device properties: +- compatible : "maxim,max8925" +- reg : the I2C slave address for the max8925 chip +- interrupts : IRQ line for the max8925 chip +- interrupt-controller: describes the max8925 as an interrupt + controller (has its own domain) +- #interrupt-cells : should be 1. + - The cell is the max8925 local IRQ number + +Optional parent device properties: +- maxim,tsc-irq: there are 2 IRQ lines for max8925, one is indicated in + interrupts property, the other is indicated here. + +max8925 consists of a large and varied group of sub-devices: + +Device Supply Names Description +------ ------------ ----------- +max8925-onkey : : On key +max8925-rtc : : RTC +max8925-regulator : : Regulators +max8925-backlight : : Backlight +max8925-touch : : Touchscreen +max8925-power : : Charger + +Example: + + pmic: max8925@3c { + compatible = "maxim,max8925"; + reg = <0x3c>; + interrupts = <1>; + interrupt-parent = <&intcmux4>; + interrupt-controller; + #interrupt-cells = <1>; + maxim,tsc-irq = <0>; + + regulators { + SDV1 { + regulator-min-microvolt = <637500>; + regulator-max-microvolt = <1425000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO1 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + + }; + backlight { + maxim,max8925-dual-string = <0>; + }; + charger { + batt-detect = <0>; + topoff-threshold = <1>; + fast-charge = <7>; + no-temp-support = <0>; + no-insert-detect = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt new file mode 100644 index 000000000..4ed52184d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max8998.txt @@ -0,0 +1,125 @@ +* Maxim MAX8998, National/TI LP3974 multi-function device + +The Maxim MAX8998 is a multi-function device which includes voltage/current +regulators, real time clock, battery charging controller and several +other sub-blocks. It is interfaced using an I2C interface. Each sub-block +is addressed by the host system using different i2c slave address. + +PMIC sub-block +-------------- + +The PMIC sub-block contains a number of voltage and current regulators, +with controllable parameters and dynamic voltage scaling capability. +In addition, it includes a real time clock and battery charging controller +as well. It is accessible at I2C address 0x66. + +Required properties: +- compatible: Should be one of the following: + - "maxim,max8998" for Maxim MAX8998 + - "national,lp3974" or "ti,lp3974" for National/TI LP3974. +- reg: Specifies the i2c slave address of the pmic block. It should be 0x66. + +Optional properties: +- interrupts: Interrupt specifiers for two interrupt sources. + - First interrupt specifier is for main interrupt. + - Second interrupt specifier is for power-on/-off interrupt. +- max8998,pmic-buck1-dvs-gpios: GPIO specifiers for two host gpios used + for buck 1 dvs. The format of the gpio specifier depends on the gpio + controller. +- max8998,pmic-buck2-dvs-gpio: GPIO specifier for host gpio used + for buck 2 dvs. The format of the gpio specifier depends on the gpio + controller. +- max8998,pmic-buck1-default-dvs-idx: Default voltage setting selected from + the possible 4 options selectable by the dvs gpios. The value of this + property should be 0, 1, 2 or 3. If not specified or out of range, + a default value of 0 is taken. +- max8998,pmic-buck2-default-dvs-idx: Default voltage setting selected from + the possible 2 options selectable by the dvs gpios. The value of this + property should be 0 or 1. If not specified or out of range, a default + value of 0 is taken. +- max8998,pmic-buck-voltage-lock: If present, disallows changing of + preprogrammed buck dvfs voltages. + +Additional properties required if max8998,pmic-buck1-dvs-gpios is defined: +- max8998,pmic-buck1-dvs-voltage: An array of 4 voltage values in microvolts + for buck1 regulator that can be selected using dvs gpio. + +Additional properties required if max8998,pmic-buck2-dvs-gpio is defined: +- max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts + for buck2 regulator that can be selected using dvs gpio. + +Regulators: All the regulators of MAX8998 to be instantiated shall be +listed in a child node named 'regulators'. Each regulator is represented +by a child node of the 'regulators' node. + + regulator-name { + /* standard regulator bindings here */ + }; + +Following regulators of the MAX8998 PMIC block are supported. Note that +the 'n' in regulator name, as in LDOn or BUCKn, represents the LDO or BUCK +number as described in MAX8998 datasheet. + + - LDOn + - valid values for n are 2 to 17 + - Example: LDO2, LDO10, LDO17 + - BUCKn + - valid values for n are 1 to 4. + - Example: BUCK1, BUCK2, BUCK3, BUCK4 + + - ENVICHG: Battery Charging Current Monitor Output. This is a fixed + voltage type regulator + + - ESAFEOUT1: (ldo19) + - ESAFEOUT2: (ld020) + + - CHARGER: main battery charger current control + +Standard regulator bindings are used inside regulator subnodes. Check + Documentation/devicetree/bindings/regulator/regulator.txt +for more details. + +Example: + + pmic@66 { + compatible = "maxim,max8998-pmic"; + reg = <0x66>; + interrupt-parent = <&wakeup_eint>; + interrupts = <4 0>, <3 0>; + + /* Buck 1 DVS settings */ + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */ + <&gpx0 1 1 0 0>; /* SET2 */ + max8998,pmic-buck1-dvs-voltage = <1350000>, <1300000>, + <1000000>, <950000>; + + /* Buck 2 DVS settings */ + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */ + max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>; + + /* Regulators to instantiate */ + regulators { + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_ARM_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <90000>; + regulator-max-microamp = <800000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml new file mode 100644 index 000000000..995e96ee7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml @@ -0,0 +1,196 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max14577.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX14577 is a MicroUSB and Companion Power Management IC which + includes voltage safeout regulators, charger and MicroUSB management IC. + + The Maxim MAX77836 is a MicroUSB and Companion Power Management IC which + includes voltage safeout and LDO regulators, charger, fuel-gauge and MicroUSB + management IC. + +properties: + compatible: + enum: + - maxim,max14577 + - maxim,max77836 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + wakeup-source: true + + charger: + $ref: /schemas/power/supply/maxim,max14577.yaml + + extcon: + type: object + additionalProperties: false + properties: + compatible: + enum: + - maxim,max14577-muic + - maxim,max77836-muic + + required: + - compatible + + regulators: + $ref: /schemas/regulator/maxim,max14577.yaml + +required: + - compatible + - interrupts + - reg + - charger + +allOf: + - if: + properties: + compatible: + contains: + const: maxim,max14577 + then: + properties: + charger: + properties: + compatible: + const: maxim,max14577-charger + extcon: + properties: + compatible: + const: maxim,max14577-muic + regulator: + properties: + compatible: + const: maxim,max14577-regulator + else: + properties: + charger: + properties: + compatible: + const: maxim,max77836-charger + extcon: + properties: + compatible: + const: maxim,max77836-muic + regulator: + properties: + compatible: + const: maxim,max77836-regulator + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@25 { + compatible = "maxim,max14577"; + reg = <0x25>; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + + extcon { + compatible = "maxim,max14577-muic"; + }; + + regulators { + compatible = "maxim,max14577-regulator"; + + SAFEOUT { + regulator-name = "SAFEOUT"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <90000>; + regulator-max-microamp = <950000>; + regulator-boot-on; + }; + }; + + charger { + compatible = "maxim,max14577-charger"; + + maxim,constant-uvolt = <4350000>; + maxim,fast-charge-uamp = <450000>; + maxim,eoc-uamp = <50000>; + maxim,ovp-uvolt = <6500000>; + }; + }; + }; + + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@25 { + compatible = "maxim,max77836"; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_NONE>; + reg = <0x25>; + wakeup-source; + + extcon { + compatible = "maxim,max77836-muic"; + }; + + regulators { + compatible = "maxim,max77836-regulator"; + + SAFEOUT { + regulator-name = "SAFEOUT"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <45000>; + regulator-max-microamp = <475000>; + regulator-boot-on; + }; + + LDO1 { + regulator-name = "MOT_2.7V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <2700000>; + }; + + LDO2 { + regulator-name = "UNUSED_LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + }; + + charger { + compatible = "maxim,max77836-charger"; + + maxim,constant-uvolt = <4350000>; + maxim,fast-charge-uamp = <225000>; + maxim,eoc-uamp = <7500>; + maxim,ovp-uvolt = <6500000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml new file mode 100644 index 000000000..d027aabe4 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77686.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77686 Power Management IC + +maintainers: + - Chanwoo Choi + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77686 Power Management + Integrated Circuit (PMIC). + + The Maxim MAX77686 is a Power Management IC which includes voltage and + current regulators, RTC and clock outputs. + + The MAX77686 provides three 32.768khz clock outputs that can be controlled + (gated/ungated) over I2C. The clock IDs are defined as preprocessor macros + in dt-bindings/clock/maxim,max77686.h. + +properties: + compatible: + const: maxim,max77686 + + '#clock-cells': + const: 1 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + voltage-regulators: + $ref: ../regulator/maxim,max77686.yaml + description: + List of child nodes that specify the regulators. + + wakeup-source: true + +required: + - compatible + - '#clock-cells' + - reg + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + max77686: pmic@9 { + compatible = "maxim,max77686"; + reg = <0x09>; + + interrupt-parent = <&gpx0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&max77686_irq>; + pinctrl-names = "default"; + wakeup-source; + #clock-cells = <1>; + + voltage-regulators { + LDO1 { + regulator-name = "VALIVE_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + LDO2 { + regulator-name = "VM1M2_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + // ... + + LDO22 { + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; + }; + + // ... + + BUCK1 { + regulator-name = "VDD_MIF"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + BUCK2 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + // ... + + BUCK9 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml new file mode 100644 index 000000000..1b06a77ec --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC + +maintainers: + - Chanwoo Choi + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX77693 is a MicroUSB and Companion Power Management IC which + includes voltage current regulators, charger, LED/flash, haptic motor driver + and MicroUSB management IC. + +properties: + compatible: + const: maxim,max77693 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + charger: + $ref: /schemas/power/supply/maxim,max77693.yaml + + led: + $ref: /schemas/leds/maxim,max77693.yaml + + max77693-muic: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-muic + + required: + - compatible + + motor-driver: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-haptic + + haptic-supply: + description: Power supply to the haptic motor + + pwms: + maxItems: 1 + + required: + - compatible + - haptic-supply + - pwms + + regulators: + $ref: ../regulator/maxim,max77693.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max77693"; + reg = <0x66>; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + + regulators { + ESAFEOUT1 { + regulator-name = "ESAFEOUT1"; + }; + + ESAFEOUT2 { + regulator-name = "ESAFEOUT2"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + }; + }; + + motor-driver { + compatible = "maxim,max77693-haptic"; + haptic-supply = <&ldo26_reg>; + pwms = <&pwm 0 38022 0>; + }; + + charger { + compatible = "maxim,max77693-charger"; + + maxim,constant-microvolt = <4350000>; + maxim,min-system-microvolt = <3600000>; + maxim,thermal-regulation-celsius = <100>; + maxim,battery-overcurrent-microamp = <3500000>; + maxim,charge-input-threshold-microvolt = <4300000>; + }; + + led { + compatible = "maxim,max77693-led"; + maxim,boost-mode = ; + maxim,boost-mvout = <5000>; + maxim,mvsys-min = <2400>; + + flash-led { + label = "max77693-flash"; + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <0>, <1>; + led-max-microamp = <500000>; + flash-max-microamp = <1250000>; + flash-max-timeout-us = <1000000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml new file mode 100644 index 000000000..edac14af1 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77714.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated. + +maintainers: + - Luca Ceresoli + +description: | + MAX77714 is a Power Management IC with 4 buck regulators, 9 + low-dropout regulators, 8 GPIOs, RTC and watchdog. + +properties: + compatible: + const: maxim,max77714 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + description: + The first cell is the IRQ number, the second cell is the trigger type. + + regulators: + type: object + additionalProperties: false + + patternProperties: + '^(buck[0-3]|ldo[0-8])$': + type: object + unevaluatedProperties: false + $ref: /schemas/regulator/regulator.yaml# + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@1c { + compatible = "maxim,max77714"; + reg = <0x1c>; + interrupt-parent = <&gpio2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml new file mode 100644 index 000000000..ad2013900 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77802.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77802 Power Management IC + +maintainers: + - Javier Martinez Canillas + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77802 Power Management + Integrated Circuit (PMIC). + + The Maxim MAX77802 is a Power Management IC which includes voltage and + current regulators (10 high efficiency Buck regulators and 32 Low-DropOut + (LDO)), RTC and clock outputs. + + The MAX77802 provides two 32.768khz clock outputs that can be controlled + (gated/ungated) over I2C. The clock IDs are defined as preprocessor macros + in dt-bindings/clock/maxim,max77802.h. + +properties: + compatible: + const: maxim,max77802 + + '#clock-cells': + const: 1 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + regulators: + $ref: /schemas/regulator/maxim,max77802.yaml + description: + List of child nodes that specify the regulators. + + inb1-supply: + description: Power supply for buck1 + inb2-supply: + description: Power supply for buck2 + inb3-supply: + description: Power supply for buck3 + inb4-supply: + description: Power supply for buck4 + inb5-supply: + description: Power supply for buck5 + inb6-supply: + description: Power supply for buck6 + inb7-supply: + description: Power supply for buck7 + inb8-supply: + description: Power supply for buck8 + inb9-supply: + description: Power supply for buck9 + inb10-supply: + description: Power supply for buck10 + + inl1-supply: + description: Power supply for LDO8, LDO15 + inl2-supply: + description: Power supply for LDO17, LDO27, LDO30, LDO35 + inl3-supply: + description: Power supply for LDO3, LDO5, LDO7, LDO7 + inl4-supply: + description: Power supply for LDO10, LDO11, LDO13, LDO14 + inl5-supply: + description: Power supply for LDO9, LDO19 + inl6-supply: + description: Power supply for LDO4, LDO21, LDO24, LDO33 + inl7-supply: + description: Power supply for LDO18, LDO20, LDO28, LDO29 + inl9-supply: + description: Power supply for LDO12, LDO23, LDO25, LDO26, LDO32, LDO34 + inl10-supply: + description: Power supply for LDO1, LDO2 + + wakeup-source: true + +required: + - compatible + - '#clock-cells' + - reg + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@9 { + compatible = "maxim,max77802"; + interrupt-parent = <&gpx3>; + interrupts = <1 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77802_irq>, <&pmic_selb>, + <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>; + wakeup-source; + reg = <0x9>; + #clock-cells = <1>; + + inb1-supply = <&tps65090_dcdc2>; + inb2-supply = <&tps65090_dcdc1>; + inb3-supply = <&tps65090_dcdc2>; + inb4-supply = <&tps65090_dcdc2>; + inb5-supply = <&tps65090_dcdc1>; + inb6-supply = <&tps65090_dcdc2>; + inb7-supply = <&tps65090_dcdc1>; + inb8-supply = <&tps65090_dcdc1>; + inb9-supply = <&tps65090_dcdc1>; + inb10-supply = <&tps65090_dcdc1>; + + inl1-supply = <&buck5_reg>; + inl2-supply = <&buck7_reg>; + inl3-supply = <&buck9_reg>; + inl4-supply = <&buck9_reg>; + inl5-supply = <&buck9_reg>; + inl6-supply = <&tps65090_dcdc2>; + inl7-supply = <&buck9_reg>; + inl9-supply = <&tps65090_dcdc2>; + inl10-supply = <&buck7_reg>; + + regulators { + BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + regulator-coupled-with = <&buck3_reg>; + regulator-coupled-max-spread = <300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + // ... + + BUCK10 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-initial-mode = ; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = ; + }; + }; + + // ... + + LDO35 { + regulator-name = "ldo_35"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml new file mode 100644 index 000000000..2e2a2a86b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77843.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77843 MicroUSB and Companion Power Management IC + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77843 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX77843 is a MicroUSB and Companion Power Management IC which + includes voltage current regulators, charger, fuel-gauge, haptic motor driver + and MicroUSB management IC. + +properties: + compatible: + const: maxim,max77843 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + extcon: + $ref: /schemas/extcon/maxim,max77843.yaml + + motor-driver: + type: object + additionalProperties: false + properties: + compatible: + const: maxim,max77843-haptic + + haptic-supply: + description: Power supply to the haptic motor + + pwms: + maxItems: 1 + + required: + - compatible + - haptic-supply + - pwms + + regulators: + $ref: /schemas/regulator/maxim,max77843.yaml + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max77843"; + interrupt-parent = <&gpa1>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reg = <0x66>; + + extcon { + compatible = "maxim,max77843-muic"; + + connector { + compatible = "samsung,usb-connector-11pin", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + /* + * TODO: The DTS this is based on does not have + * port@0 which is a required property. The ports + * look incomplete and need fixing. + * Add a disabled port just to satisfy dtschema. + */ + reg = <0>; + status = "disabled"; + }; + + port@3 { + reg = <3>; + endpoint { + remote-endpoint = <&mhl_to_musb_con>; + }; + }; + }; + }; + + ports { + port { + endpoint { + remote-endpoint = <&usb_to_muic>; + }; + }; + }; + }; + + regulators { + compatible = "maxim,max77843-regulator"; + + SAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + SAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <100000>; + regulator-max-microamp = <3150000>; + }; + }; + + motor-driver { + compatible = "maxim,max77843-haptic"; + haptic-supply = <&ldo38_reg>; + pwms = <&pwm 0 33670 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt new file mode 100644 index 000000000..8261ea732 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt @@ -0,0 +1,156 @@ +* Freescale MC13783/MC13892 Power Management Integrated Circuit (PMIC) + +Required properties: +- compatible : Should be "fsl,mc13783" or "fsl,mc13892" + +Optional properties: +- fsl,mc13xxx-uses-adc : Indicate the ADC is being used +- fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used +- fsl,mc13xxx-uses-rtc : Indicate the RTC is being used +- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used + +Sub-nodes: +- codec: Contain the Audio Codec node. + - adc-port: Contain PMIC SSI port number used for ADC. + - dac-port: Contain PMIC SSI port number used for DAC. +- leds : Contain the led nodes and initial register values in property + "led-control". Number of register depends of used IC, for MC13783 is 6, + for MC13892 is 4, for MC34708 is 1. See datasheet for bits definitions of + these registers. + - #address-cells: Must be 1. + - #size-cells: Must be 0. + Each led node should contain "reg", which used as LED ID (described below). + Optional properties "label" and "linux,default-trigger" is described in + Documentation/devicetree/bindings/leds/common.txt. +- regulators : Contain the regulator nodes. The regulators are bound using + their names as listed below with their registers and bits for enabling. + +MC13783 LED IDs: + 0 : Main display + 1 : AUX display + 2 : Keypad + 3 : Red 1 + 4 : Green 1 + 5 : Blue 1 + 6 : Red 2 + 7 : Green 2 + 8 : Blue 2 + 9 : Red 3 + 10 : Green 3 + 11 : Blue 3 + +MC13892 LED IDs: + 0 : Main display + 1 : AUX display + 2 : Keypad + 3 : Red + 4 : Green + 5 : Blue + +MC34708 LED IDs: + 0 : Charger Red + 1 : Charger Green + +MC13783 regulators: + sw1a : regulator SW1A (register 24, bit 0) + sw1b : regulator SW1B (register 25, bit 0) + sw2a : regulator SW2A (register 26, bit 0) + sw2b : regulator SW2B (register 27, bit 0) + sw3 : regulator SW3 (register 29, bit 20) + vaudio : regulator VAUDIO (register 32, bit 0) + viohi : regulator VIOHI (register 32, bit 3) + violo : regulator VIOLO (register 32, bit 6) + vdig : regulator VDIG (register 32, bit 9) + vgen : regulator VGEN (register 32, bit 12) + vrfdig : regulator VRFDIG (register 32, bit 15) + vrfref : regulator VRFREF (register 32, bit 18) + vrfcp : regulator VRFCP (register 32, bit 21) + vsim : regulator VSIM (register 33, bit 0) + vesim : regulator VESIM (register 33, bit 3) + vcam : regulator VCAM (register 33, bit 6) + vrfbg : regulator VRFBG (register 33, bit 9) + vvib : regulator VVIB (register 33, bit 11) + vrf1 : regulator VRF1 (register 33, bit 12) + vrf2 : regulator VRF2 (register 33, bit 15) + vmmc1 : regulator VMMC1 (register 33, bit 18) + vmmc2 : regulator VMMC2 (register 33, bit 21) + gpo1 : regulator GPO1 (register 34, bit 6) + gpo2 : regulator GPO2 (register 34, bit 8) + gpo3 : regulator GPO3 (register 34, bit 10) + gpo4 : regulator GPO4 (register 34, bit 12) + pwgt1spi : regulator PWGT1SPI (register 34, bit 15) + pwgt2spi : regulator PWGT2SPI (register 34, bit 16) + +MC13892 regulators: + vcoincell : regulator VCOINCELL (register 13, bit 23) + sw1 : regulator SW1 (register 24, bit 0) + sw2 : regulator SW2 (register 25, bit 0) + sw3 : regulator SW3 (register 26, bit 0) + sw4 : regulator SW4 (register 27, bit 0) + swbst : regulator SWBST (register 29, bit 20) + vgen1 : regulator VGEN1 (register 32, bit 0) + viohi : regulator VIOHI (register 32, bit 3) + vdig : regulator VDIG (register 32, bit 9) + vgen2 : regulator VGEN2 (register 32, bit 12) + vpll : regulator VPLL (register 32, bit 15) + vusb2 : regulator VUSB2 (register 32, bit 18) + vgen3 : regulator VGEN3 (register 33, bit 0) + vcam : regulator VCAM (register 33, bit 6) + vvideo : regulator VVIDEO (register 33, bit 12) + vaudio : regulator VAUDIO (register 33, bit 15) + vsd : regulator VSD (register 33, bit 18) + gpo1 : regulator GPO1 (register 34, bit 6) + gpo2 : regulator GPO2 (register 34, bit 8) + gpo3 : regulator GPO3 (register 34, bit 10) + gpo4 : regulator GPO4 (register 34, bit 12) + pwgt1spi : regulator PWGT1SPI (register 34, bit 15) + pwgt2spi : regulator PWGT2SPI (register 34, bit 16) + vusb : regulator VUSB (register 50, bit 3) + + The bindings details of individual regulator device can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt + +Examples: + +ecspi@70010000 { /* ECSPI1 */ + cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */ + <&gpio4 25 0>; /* GPIO4_25 */ + + pmic: mc13892@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mc13892"; + spi-max-frequency = <6000000>; + reg = <0>; + interrupt-parent = <&gpio0>; + interrupts = <8>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + led-control = <0x000 0x000 0x0e0 0x000>; + + sysled@3 { + reg = <3>; + label = "system:red:live"; + linux,default-trigger = "heartbeat"; + }; + }; + + regulators { + sw1_reg: mc13892__sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: mc13892__sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml new file mode 100644 index 000000000..28eee0244 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml @@ -0,0 +1,256 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mediatek,mt6360.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT6360 PMIC from MediaTek Integrated + +maintainers: + - Gene Chen + +description: | + MT6360 is a PMIC device with the following sub modules. + It is interfaced to host controller using I2C interface. + + This document describes the binding for PMIC device and its sub module. + +properties: + compatible: + const: mediatek,mt6360 + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + interrupt-names: + const: IRQB + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + description: + The first cell is the IRQ number. + + regulators: + $ref: /schemas/regulator/mt6360-regulator.yaml# + + charger: + $ref: /schemas/power/supply/mt6360_charger.yaml# + + tcpc: + $ref: /schemas/usb/mediatek,mt6360-tcpc.yaml# + + led-controller: + $ref: /schemas/leds/leds-mt6360.yaml# + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: + type: object + +examples: + - | + #include + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "mediatek,mt6360"; + reg = <0x34>; + wakeup-source; + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "IRQB"; + interrupt-controller; + #interrupt-cells = <1>; + + mt6360_charger: charger { + compatible = "mediatek,mt6360-chg"; + richtek,vinovp-microvolt = <14500000>; + + otg_vbus_regulator: usb-otg-vbus-regulator { + regulator-compatible = "usb-otg-vbus"; + regulator-name = "usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + }; + }; + + led-controller { + compatible = "mediatek,mt6360-led"; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + reg = <0>; + function = LED_FUNCTION_INDICATOR; + color = ; + led-max-microamp = <24000>; + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + color = ; + }; + led@1 { + reg = <1>; + color = ; + }; + led@2 { + reg = <2>; + color = ; + }; + }; + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + color = ; + led-max-microamp = <150000>; + }; + led@4 { + reg = <4>; + function = LED_FUNCTION_FLASH; + color = ; + function-enumerator = <1>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + led@5 { + reg = <5>; + function = LED_FUNCTION_FLASH; + color = ; + function-enumerator = <2>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + }; + + regulators { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN3-supply = <&BUCK2>; + buck1 { + regulator-compatible = "BUCK1"; + regulator-name = "mt6360,buck1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = ; + }; + BUCK2: buck2 { + regulator-compatible = "BUCK2"; + regulator-name = "mt6360,buck2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = ; + }; + ldo6 { + regulator-compatible = "LDO6"; + regulator-name = "mt6360,ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = ; + }; + ldo7 { + regulator-compatible = "LDO7"; + regulator-name = "mt6360,ldo7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = ; + }; + ldo1 { + regulator-compatible = "LDO1"; + regulator-name = "mt6360,ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + ldo2 { + regulator-compatible = "LDO2"; + regulator-name = "mt6360,ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + ldo3 { + regulator-compatible = "LDO3"; + regulator-name = "mt6360,ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + ldo5 { + regulator-compatible = "LDO5"; + regulator-name = "mt6360,ldo5"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + }; + + tcpc { + compatible = "mediatek,mt6360-tcpc"; + interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "PD_IRQB"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_hs>; + }; + }; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&usb_ss>; + }; + }; + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_aux>; + }; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml new file mode 100644 index 000000000..5644882db --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml @@ -0,0 +1,280 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mediatek,mt6370.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6370 SubPMIC + +maintainers: + - ChiYuan Huang + +description: | + MT6370 is a highly-integrated smart power management IC, which includes a + single cell Li-Ion/Li-Polymer switching battery charger, a USB Type-C & + Power Delivery (PD) controller, dual flash LED current sources, a RGB LED + driver, a backlight WLED driver, a display bias driver and a general LDO for + portable devices. + +properties: + compatible: + const: mediatek,mt6370 + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + adc: + type: object + description: | + Provides 9 channels for system monitoring, including VBUSDIV5 (lower + accuracy, higher measure range), VBUSDIV2 (higher accuracy, lower + measure range), VBAT, VSYS, CHG_VDDP, TS_BAT, IBUS, IBAT, and TEMP_JC. + + properties: + compatible: + const: mediatek,mt6370-adc + + "#io-channel-cells": + const: 1 + + required: + - compatible + - "#io-channel-cells" + + backlight: + type: object + $ref: /schemas/leds/backlight/mediatek,mt6370-backlight.yaml# + + charger: + type: object + $ref: /schemas/power/supply/mediatek,mt6370-charger.yaml# + + tcpc: + type: object + $ref: /schemas/usb/mediatek,mt6370-tcpc.yaml# + + indicator: + type: object + $ref: /schemas/leds/mediatek,mt6370-indicator.yaml# + + flashlight: + type: object + $ref: /schemas/leds/mediatek,mt6370-flashlight.yaml# + + regulators: + type: object + description: | + List all supported regulators, which support the control for DisplayBias + voltages and one general purpose LDO which commonly used to drive the + vibrator. + + patternProperties: + "^(dsvbst|vibldo)$": + $ref: /schemas/regulator/regulator.yaml# + type: object + unevaluatedProperties: false + + "^(dsvpos|dsvneg)$": + $ref: /schemas/regulator/regulator.yaml# + type: object + unevaluatedProperties: false + + properties: + enable-gpios: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - regulators + - adc + - backlight + - indicator + - tcpc + - charger + - flashlight + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "mediatek,mt6370"; + reg = <0x34>; + wakeup-source; + interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + mt6370_adc: adc { + compatible = "mediatek,mt6370-adc"; + #io-channel-cells = <1>; + }; + + backlight { + compatible = "mediatek,mt6370-backlight"; + mediatek,bled-channel-use = /bits/ 8 <15>; + }; + + charger { + compatible = "mediatek,mt6370-charger"; + interrupts = <68>, <48>, <6>; + interrupt-names = "uvp_d_evt", "attach_i", "mivr"; + io-channels = <&mt6370_adc MT6370_CHAN_IBUS>; + + mt6370_otg_vbus: usb-otg-vbus-regulator { + regulator-name = "mt6370-usb-otg-vbus"; + regulator-min-microvolt = <4350000>; + regulator-max-microvolt = <5800000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <3000000>; + }; + }; + + indicator { + compatible = "mediatek,mt6370-indicator"; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + reg = <0>; + function = LED_FUNCTION_INDICATOR; + color = ; + led-max-microamp = <24000>; + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + color = ; + }; + led@1 { + reg = <1>; + color = ; + }; + led@2 { + reg = <2>; + color = ; + }; + }; + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + color = ; + led-max-microamp = <6000>; + }; + }; + + flashlight { + compatible = "mediatek,mt6370-flashlight"; + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + led-sources = <0>; + function = LED_FUNCTION_FLASH; + color = ; + function-enumerator = <1>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1248000>; + }; + led@1 { + reg = <1>; + led-sources = <1>; + function = LED_FUNCTION_FLASH; + color = ; + function-enumerator = <2>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1248000>; + }; + }; + + tcpc { + compatible = "mediatek,mt6370-tcpc"; + interrupts-extended = <&gpio26 4 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + vbus-supply = <&mt6370_otg_vbus>; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_hs>; + }; + }; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&usb_ss>; + }; + }; + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_aux>; + }; + }; + }; + }; + }; + + regulators { + dsvbst { + regulator-name = "mt6370-dsv-vbst"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6200000>; + }; + dsvpos { + regulator-name = "mt6370-dsv-vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + dsvneg { + regulator-name = "mt6370-dsv-vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + vibldo { + regulator-name = "mt6370-vib-ldo"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <4000000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml new file mode 100644 index 000000000..c8c4812ff --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mediatek,mt8195-scpsys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek System Control Processor System + +maintainers: + - MandyJH Liu + +description: + MediaTek System Control Processor System (SCPSYS) has several + power management tasks. The tasks include MTCMOS power + domain control, thermal measurement, DVFS, etc. + +properties: + compatible: + items: + - enum: + - mediatek,mt8167-scpsys + - mediatek,mt8173-scpsys + - mediatek,mt8183-scpsys + - mediatek,mt8186-scpsys + - mediatek,mt8192-scpsys + - mediatek,mt8195-scpsys + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + power-controller: + $ref: /schemas/power/mediatek,power-controller.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + #include + + syscon@10006000 { + compatible = "mediatek,mt8195-scpsys", "syscon", "simple-mfd"; + reg = <0x10006000 0x100>; + + spm: power-controller { + compatible = "mediatek,mt8195-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* sample of power domain nodes */ + power-domain@MT8195_POWER_DOMAIN_PCIE_PHY { + reg = ; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY { + reg = ; + #power-domain-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt new file mode 100644 index 000000000..336c0495c --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mfd.txt @@ -0,0 +1,51 @@ +Multi-Function Devices (MFD) + +These devices comprise a nexus for heterogeneous hardware blocks containing +more than one non-unique yet varying hardware functionality. + +A typical MFD can be: + +- A mixed signal ASIC on an external bus, sometimes a PMIC (Power Management + Integrated Circuit) that is manufactured in a lower technology node (rough + silicon) that handles analog drivers for things like audio amplifiers, LED + drivers, level shifters, PHY (physical interfaces to things like USB or + ethernet), regulators etc. + +- A range of memory registers containing "miscellaneous system registers" also + known as a system controller "syscon" or any other memory range containing a + mix of unrelated hardware devices. + +Optional properties: + +- compatible : "simple-mfd" - this signifies that the operating system should + consider all subnodes of the MFD device as separate devices akin to how + "simple-bus" indicates when to see subnodes as children for a simple + memory-mapped bus. For more complex devices, when the nexus driver has to + probe registers to figure out what child devices exist etc, this should not + be used. In the latter case the child devices will be determined by the + operating system. + +- ranges: Describes the address mapping relationship to the parent. Should set + the child's base address to 0, the physical address within parent's address + space, and the length of the address map. + +- #address-cells: Specifies the number of cells used to represent physical base + addresses. Must be present if ranges is used. + +- #size-cells: Specifies the number of cells used to represent the size of an + address. Must be present if ranges is used. + +Example: + +foo@1000 { + compatible = "syscon", "simple-mfd"; + reg = <0x01000 0x1000>; + + led@8.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "myled"; + default-state = "on"; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt new file mode 100644 index 000000000..190230216 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt @@ -0,0 +1,72 @@ +Motorola CPCAP PMIC device tree binding + +Required properties: +- compatible : One or both of "motorola,cpcap" or "ste,6556002" +- reg : SPI chip select +- interrupts : The interrupt line the device is connected to +- interrupt-controller : Marks the device node as an interrupt controller +- #interrupt-cells : The number of cells to describe an IRQ, should be 2 +- #address-cells : Child device offset number of cells, should be 1 +- #size-cells : Child device size number of cells, should be 0 +- spi-max-frequency : Typically set to 3000000 +- spi-cs-high : SPI chip select direction + +Optional subnodes: + +The sub-functions of CPCAP get their own node with their own compatible values, +which are described in the following files: + +- Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml +- Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml +- Documentation/devicetree/bindings/regulator/cpcap-regulator.txt +- Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt +- Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt +- Documentation/devicetree/bindings/rtc/cpcap-rtc.txt +- Documentation/devicetree/bindings/leds/leds-cpcap.txt +- Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml + +The only exception is the audio codec. Instead of a compatible value its +node must be named "audio-codec". + +Required properties for the audio-codec subnode: + +- #sound-dai-cells = <1>; + +The audio-codec provides two DAIs. The first one is connected to the +Stereo HiFi DAC and the second one is connected to the Voice DAC. + +Example: + +&mcspi1 { + cpcap: pmic@0 { + compatible = "motorola,cpcap", "ste,6556002"; + reg = <0>; /* cs0 */ + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <3000000>; + spi-cs-high; + + audio-codec { + #sound-dai-cells = <1>; + + /* HiFi */ + port@0 { + endpoint { + remote-endpoint = <&cpu_dai1>; + }; + }; + + /* Voice */ + port@1 { + endpoint { + remote-endpoint = <&cpu_dai2>; + }; + }; + }; + }; +}; + diff --git a/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml b/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml new file mode 100644 index 000000000..5ba849d78 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mps,mp2629.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MP2629 Battery Charger PMIC from Monolithic Power System. + +maintainers: + - Saravanan Sekar + +description: | + MP2629 is a PMIC providing battery charging and power supply for smartphones, + wireless camera and portable devices. Chip is controlled over I2C. + + The battery charge management device handles battery charger controller and + ADC IIO device for battery, system voltage + +properties: + compatible: + enum: + - mps,mp2629 + - mps,mp2733 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + description: + The first cell is the IRQ number, the second cell is the trigger type. + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@4b { + compatible = "mps,mp2629"; + reg = <0x4b>; + + interrupt-controller; + interrupt-parent = <&gpio2>; + #interrupt-cells = <2>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml new file mode 100644 index 000000000..8bf45a567 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mscc,ocelot.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ocelot Externally-Controlled Ethernet Switch + +maintainers: + - Colin Foster + +description: | + The Ocelot ethernet switch family contains chips that have an internal CPU + (VSC7513, VSC7514) and chips that don't (VSC7511, VSC7512). All switches have + the option to be controlled externally, which is the purpose of this driver. + + The switch family is a multi-port networking switch that supports many + interfaces. Additionally, the device can perform pin control, MDIO buses, and + external GPIO expanders. + +properties: + compatible: + enum: + - mscc,vsc7512 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + spi-max-frequency: + maxItems: 1 + +patternProperties: + "^pinctrl@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/mscc,ocelot-pinctrl.yaml + + "^gpio@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/microchip,sparx5-sgpio.yaml + properties: + compatible: + enum: + - mscc,ocelot-sgpio + + "^mdio@[0-9a-f]+$": + type: object + $ref: /schemas/net/mscc,miim.yaml + properties: + compatible: + enum: + - mscc,ocelot-miim + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + - spi-max-frequency + +additionalProperties: false + +examples: + - | + ocelot_clock: ocelot-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + soc@0 { + compatible = "mscc,vsc7512"; + spi-max-frequency = <2500000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + mdio@7107009c { + compatible = "mscc,ocelot-miim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7107009c 0x24>; + + sw_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + }; + + mdio@710700c0 { + compatible = "mscc,ocelot-miim"; + pinctrl-names = "default"; + pinctrl-0 = <&miim1_pins>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x710700c0 0x24>; + + sw_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + }; + + gpio: pinctrl@71070034 { + compatible = "mscc,ocelot-pinctrl"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 22>; + reg = <0x71070034 0x6c>; + + sgpio_pins: sgpio-pins { + pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3"; + function = "sg0"; + }; + + miim1_pins: miim1-pins { + pins = "GPIO_14", "GPIO_15"; + function = "miim"; + }; + }; + + gpio@710700f8 { + compatible = "mscc,ocelot-sgpio"; + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <12500000>; + clocks = <&ocelot_clock>; + microchip,sgpio-port-ranges = <0 15>; + pinctrl-names = "default"; + pinctrl-0 = <&sgpio_pins>; + reg = <0x710700f8 0x100>; + + sgpio_in0: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <64>; + }; + + sgpio_out1: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <64>; + }; + }; + }; + }; + +... + diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt new file mode 100644 index 000000000..8f9784af9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt @@ -0,0 +1,110 @@ +MediaTek MT6397/MT6323 Multifunction Device Driver + +MT6397/MT6323 is a multifunction device with the following sub modules: +- Regulator +- RTC +- Audio codec +- GPIO +- Clock +- LED +- Keys +- Power controller + +It is interfaced to host controller using SPI interface by a proprietary hardware +called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap. +See the following for pwarp node definitions: +../soc/mediatek/pwrap.txt + +This document describes the binding for MFD device and its sub module. + +Required properties: +compatible: + "mediatek,mt6323" for PMIC MT6323 + "mediatek,mt6331" for PMIC MT6331 and MT6332 + "mediatek,mt6357" for PMIC MT6357 + "mediatek,mt6358" for PMIC MT6358 + "mediatek,mt6359" for PMIC MT6359 + "mediatek,mt6366", "mediatek,mt6358" for PMIC MT6366 + "mediatek,mt6397" for PMIC MT6397 + +Optional subnodes: + +- rtc + Required properties: Should be one of follows + - compatible: "mediatek,mt6323-rtc" + - compatible: "mediatek,mt6331-rtc" + - compatible: "mediatek,mt6358-rtc" + - compatible: "mediatek,mt6397-rtc" + For details, see ../rtc/rtc-mt6397.txt +- regulators + Required properties: + - compatible: "mediatek,mt6323-regulator" + see ../regulator/mt6323-regulator.txt + - compatible: "mediatek,mt6358-regulator" + - compatible: "mediatek,mt6366-regulator", "mediatek-mt6358-regulator" + see ../regulator/mt6358-regulator.txt + - compatible: "mediatek,mt6397-regulator" + see ../regulator/mt6397-regulator.txt +- codec + Required properties: + - compatible: "mediatek,mt6397-codec" or "mediatek,mt6358-sound" +- clk + Required properties: + - compatible: "mediatek,mt6397-clk" +- led + Required properties: + - compatible: "mediatek,mt6323-led" + see ../leds/leds-mt6323.txt + +- keys + Required properties: Should be one of the following + - compatible: "mediatek,mt6323-keys" + - compatible: "mediatek,mt6331-keys" + - compatible: "mediatek,mt6397-keys" + see ../input/mtk-pmic-keys.txt + +- power-controller + Required properties: + - compatible: "mediatek,mt6323-pwrc" + For details, see ../power/reset/mt6323-poweroff.txt + +- pin-controller + Required properties: + - compatible: "mediatek,mt6397-pinctrl" + For details, see ../pinctrl/pinctrl-mt65xx.txt + +Example: + pwrap: pwrap@1000f000 { + compatible = "mediatek,mt8135-pwrap"; + + ... + + pmic { + compatible = "mediatek,mt6397"; + + codec: mt6397codec { + compatible = "mediatek,mt6397-codec"; + }; + + regulators { + compatible = "mediatek,mt6397-regulator"; + + mt6397_vpca15_reg: buck_vpca15 { + regulator-compatible = "buck_vpca15"; + regulator-name = "vpca15"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vgp4_reg: ldo_vgp4 { + regulator-compatible = "ldo_vgp4"; + regulator-name = "vgp4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt new file mode 100644 index 000000000..755cbef06 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt @@ -0,0 +1,45 @@ +* Freescale MXS LRADC device driver + +Required properties: +- compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc" + for i.MX28 SoC +- reg: Address and length of the register set for the device +- interrupts: Should contain the LRADC interrupts + +Optional properties: +- fsl,lradc-touchscreen-wires: Number of wires used to connect the touchscreen + to LRADC. Valid value is either 4 or 5. If this + property is not present, then the touchscreen is + disabled. 5 wires is valid for i.MX28 SoC only. +- fsl,ave-ctrl: number of samples per direction to calculate an average value. + Allowed value is 1 ... 32, default is 4 +- fsl,ave-delay: delay between consecutive samples. Allowed value is + 2 ... 2048. It is used if 'fsl,ave-ctrl' > 1, counts at + 2 kHz and its default is 2 (= 1 ms) +- fsl,settling: delay between plate switch to next sample. Allowed value is + 1 ... 2047. It counts at 2 kHz and its default is + 10 (= 5 ms) + +Example for i.MX23 SoC: + + lradc@80050000 { + compatible = "fsl,imx23-lradc"; + reg = <0x80050000 0x2000>; + interrupts = <36 37 38 39 40 41 42 43 44>; + fsl,lradc-touchscreen-wires = <4>; + fsl,ave-ctrl = <4>; + fsl,ave-delay = <2>; + fsl,settling = <10>; + }; + +Example for i.MX28 SoC: + + lradc@80050000 { + compatible = "fsl,imx28-lradc"; + reg = <0x80050000 0x2000>; + interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>; + fsl,lradc-touchscreen-wires = <5>; + fsl,ave-ctrl = <4>; + fsl,ave-delay = <2>; + fsl,settling = <10>; + }; diff --git a/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml new file mode 100644 index 000000000..59a630025 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/netronix,ntxec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Netronix Embedded Controller + +maintainers: + - Jonathan Neuschäfer + +description: | + This EC is found in e-book readers of multiple brands (e.g. Kobo, Tolino), and + is typically implemented as a TI MSP430 microcontroller. + +properties: + compatible: + const: netronix,ntxec + + reg: + items: + - description: The I2C address of the EC + + system-power-controller: + type: boolean + description: See Documentation/devicetree/bindings/power/power-controller.txt + + interrupts: + minItems: 1 + description: + The EC can signal interrupts via a GPIO line + + "#pwm-cells": + const: 2 + description: | + Number of cells in a PWM specifier. + + The following PWM channels are supported: + - 0: The PWM channel controlled by registers 0xa1-0xa7 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ec: embedded-controller@43 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ntxec>; + + compatible = "netronix,ntxec"; + reg = <0x43>; + system-power-controller; + interrupt-parent = <&gpio4>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + #pwm-cells = <2>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ec 0 50000>; + power-supply = <&backlight_regulator>; + }; + + backlight_regulator: regulator-dummy { + compatible = "regulator-fixed"; + regulator-name = "backlight"; + }; diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt new file mode 100644 index 000000000..aa1eaa595 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt @@ -0,0 +1,103 @@ +OMAP HS USB Host + +Required properties: + +- compatible: should be "ti,usbhs-host" +- reg: should contain one register range i.e. start and length +- ti,hwmods: must contain "usb_host_hs" + +Optional properties: + +- num-ports: number of USB ports. Usually this is automatically detected + from the IP's revision register but can be overridden by specifying + this property. A maximum of 3 ports are supported at the moment. + +- portN-mode: String specifying the port mode for port N, where N can be + from 1 to 3. If the port mode is not specified, that port is treated + as unused. When specified, it must be one of the following. + "ehci-phy", + "ehci-tll", + "ehci-hsic", + "ohci-phy-6pin-datse0", + "ohci-phy-6pin-dpdm", + "ohci-phy-3pin-datse0", + "ohci-phy-4pin-dpdm", + "ohci-tll-6pin-datse0", + "ohci-tll-6pin-dpdm", + "ohci-tll-3pin-datse0", + "ohci-tll-4pin-dpdm", + "ohci-tll-2pin-datse0", + "ohci-tll-2pin-dpdm", + +- single-ulpi-bypass: Must be present if the controller contains a single + ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1 + +- clocks: a list of phandles and clock-specifier pairs, one for each entry in + clock-names. + +- clock-names: should include: + For OMAP3 + * "usbhost_120m_fck" - 120MHz Functional clock. + + For OMAP4+ + * "refclk_60m_int" - 60MHz internal reference clock for UTMI clock mux + * "refclk_60m_ext_p1" - 60MHz external ref. clock for Port 1's UTMI clock mux. + * "refclk_60m_ext_p2" - 60MHz external ref. clock for Port 2's UTMI clock mux + * "utmi_p1_gfclk" - Port 1 UTMI clock mux. + * "utmi_p2_gfclk" - Port 2 UTMI clock mux. + * "usb_host_hs_utmi_p1_clk" - Port 1 UTMI clock gate. + * "usb_host_hs_utmi_p2_clk" - Port 2 UTMI clock gate. + * "usb_host_hs_utmi_p3_clk" - Port 3 UTMI clock gate. + * "usb_host_hs_hsic480m_p1_clk" - Port 1 480MHz HSIC clock gate. + * "usb_host_hs_hsic480m_p2_clk" - Port 2 480MHz HSIC clock gate. + * "usb_host_hs_hsic480m_p3_clk" - Port 3 480MHz HSIC clock gate. + * "usb_host_hs_hsic60m_p1_clk" - Port 1 60MHz HSIC clock gate. + * "usb_host_hs_hsic60m_p2_clk" - Port 2 60MHz HSIC clock gate. + * "usb_host_hs_hsic60m_p3_clk" - Port 3 60MHz HSIC clock gate. + +Required properties if child node exists: + +- #address-cells: Must be 1 +- #size-cells: Must be 1 +- ranges: must be present + +Properties for children: + +The OMAP HS USB Host subsystem contains EHCI and OHCI controllers. +See Documentation/devicetree/bindings/usb/ehci-omap.txt and +Documentation/devicetree/bindings/usb/ohci-omap3.txt. + +Example for OMAP4: + +usbhshost: usbhshost@4a064000 { + compatible = "ti,usbhs-host"; + reg = <0x4a064000 0x800>; + ti,hwmods = "usb_host_hs"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbhsohci: ohci@4a064800 { + compatible = "ti,ohci-omap3", "usb-ohci"; + reg = <0x4a064800 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 76 0x4>; + }; + + usbhsehci: ehci@4a064c00 { + compatible = "ti,ehci-omap", "usb-ehci"; + reg = <0x4a064c00 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 77 0x4>; + }; +}; + +&usbhshost { + port1-mode = "ehci-phy"; + port2-mode = "ehci-tll"; + port3-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <&hsusb1_phy 0 &hsusb3_phy>; +}; diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt new file mode 100644 index 000000000..c58d70437 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt @@ -0,0 +1,27 @@ +OMAP HS USB Host TLL (Transceiver-Less Interface) + +Required properties: + +- compatible : should be "ti,usbhs-tll" +- reg : should contain one register range i.e. start and length +- interrupts : should contain the TLL module's interrupt +- ti,hwmod : must contain "usb_tll_hs" + +Optional properties: + +- clocks: a list of phandles and clock-specifier pairs, one for each entry in + clock-names. + +- clock-names: should include: + * "usb_tll_hs_usb_ch0_clk" - USB TLL channel 0 clock + * "usb_tll_hs_usb_ch1_clk" - USB TLL channel 1 clock + * "usb_tll_hs_usb_ch2_clk" - USB TLL channel 2 clock + +Example: + + usbhstll: usbhstll@4a062000 { + compatible = "ti,usbhs-tll"; + reg = <0x4a062000 0x1000>; + interrupts = <78>; + ti,hwmods = "usb_tll_hs"; + }; diff --git a/Documentation/devicetree/bindings/mfd/palmas.txt b/Documentation/devicetree/bindings/mfd/palmas.txt new file mode 100644 index 000000000..e736ab301 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/palmas.txt @@ -0,0 +1,52 @@ +* palmas device tree bindings + +The TI palmas family current members :- +twl6035 (palmas) +twl6037 (palmas) +tps65913 (palmas) +tps65914 (palmas) +tps659038 +tps65917 + +Required properties: +- compatible : Should be from the list + ti,twl6035 + ti,twl6036 + ti,twl6037 + ti,tps65913 + ti,tps65914 + ti,tps80036 + ti,tps659038 + ti,tps65917 +and also the generic series names + ti,palmas +- interrupt-controller : palmas has its own internal IRQs +- #interrupt-cells : should be set to 2 for IRQ number and flags + The first cell is the IRQ number. + The second cell is the flags, encoded as the trigger masks from + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +Optional properties: + ti,mux-padX : set the pad register X (1-2) to the correct muxing for the + hardware, if not set will use muxing in OTP. + +Example: + +palmas { + compatible = "ti,twl6035", "ti,palmas"; + reg = <0x48> + interrupt-parent = <&intc>; + interrupt-controller; + #interrupt-cells = <2>; + + ti,mux-pad1 = <0>; + ti,mux-pad2 = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + pmic { + compatible = "ti,twl6035-pmic", "ti,palmas-pmic"; + .... + }; +} diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml new file mode 100644 index 000000000..ec3138c1b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qcom,pm8008.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. PM8008 PMIC bindings + +maintainers: + - Guru Das Srinagesh + +description: | + Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates + all the necessary power management, housekeeping, and interface support + functions into a single IC. + +properties: + compatible: + const: qcom,pm8008 + + reg: + description: + I2C slave address. + + maxItems: 1 + + interrupts: + maxItems: 1 + + description: Parent interrupt. + + "#interrupt-cells": + const: 2 + + description: | + The first cell is the IRQ number, the second cell is the IRQ trigger + flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h. + + interrupt-controller: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^gpio@[0-9a-f]+$": + type: object + + description: | + The GPIO peripheral. This node may be specified twice, one for each GPIO. + + properties: + compatible: + items: + - const: qcom,pm8008-gpio + - const: qcom,spmi-gpio + + reg: + description: Peripheral address of one of the two GPIO peripherals. + maxItems: 1 + + gpio-controller: true + + gpio-ranges: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + "#gpio-cells": + const: 2 + + required: + - compatible + - reg + - gpio-controller + - interrupt-controller + - "#gpio-cells" + - gpio-ranges + - "#interrupt-cells" + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + #include + #include + qupv3_se13_i2c { + #address-cells = <1>; + #size-cells = <0>; + pm8008i@8 { + compatible = "qcom,pm8008"; + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&tlmm>; + interrupts = <32 IRQ_TYPE_EDGE_RISING>; + + pm8008_gpios: gpio@c000 { + compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8008_gpios 0 0 2>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml new file mode 100644 index 000000000..777f2da52 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -0,0 +1,296 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SPMI PMICs multi-function device + +description: | + Some Qualcomm PMICs used with the Snapdragon series SoCs are interfaced + to the chip via the SPMI (System Power Management Interface) bus. + Support for multiple independent functions are implemented by splitting the + 16-bit SPMI peripheral address space into 256 smaller fixed-size regions, 256 bytes + each. A function can consume one or more of these fixed-size register regions. + + The Qualcomm SPMI series includes the PM8941, PM8841, PMA8084, PM8998 and other + PMICs. These PMICs use a "QPNP" scheme through SPMI interface. + QPNP is effectively a partitioning scheme for dividing the SPMI extended + register space up into logical pieces, and set of fixed register + locations/definitions within these regions, with some of these regions + specifically used for interrupt handling. + +maintainers: + - Stephen Boyd + +properties: + $nodename: + oneOf: + - pattern: '^pmic@.*$' + - pattern: '^pm(a|s)?[0-9]*@.*$' + deprecated: true + + compatible: + items: + - enum: + - qcom,pm6150 + - qcom,pm6150l + - qcom,pm6350 + - qcom,pm660 + - qcom,pm660l + - qcom,pm7250b + - qcom,pm7325 + - qcom,pm8004 + - qcom,pm8005 + - qcom,pm8009 + - qcom,pm8019 + - qcom,pm8028 + - qcom,pm8110 + - qcom,pm8150 + - qcom,pm8150b + - qcom,pm8150c + - qcom,pm8150l + - qcom,pm8226 + - qcom,pm8350 + - qcom,pm8350b + - qcom,pm8350c + - qcom,pm8841 + - qcom,pm8909 + - qcom,pm8916 + - qcom,pm8941 + - qcom,pm8950 + - qcom,pm8953 + - qcom,pm8994 + - qcom,pm8998 + - qcom,pma8084 + - qcom,pmd9635 + - qcom,pmi8950 + - qcom,pmi8962 + - qcom,pmi8994 + - qcom,pmi8998 + - qcom,pmk8002 + - qcom,pmk8350 + - qcom,pmm8155au + - qcom,pmp8074 + - qcom,pmr735a + - qcom,pmr735b + - qcom,pms405 + - qcom,pmx55 + - qcom,pmx65 + - qcom,smb2351 + - const: qcom,spmi-pmic + + reg: + minItems: 1 + maxItems: 2 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + labibb: + type: object + $ref: /schemas/regulator/qcom-labibb-regulator.yaml# + + regulators: + type: object + $ref: /schemas/regulator/qcom,spmi-regulator.yaml# + + pwm: + type: object + $ref: /schemas/leds/leds-qcom-lpg.yaml# + +patternProperties: + "^adc@[0-9a-f]+$": + type: object + $ref: /schemas/iio/adc/qcom,spmi-vadc.yaml# + + "^adc-tm@[0-9a-f]+$": + type: object + # ref depends on compatible, see allOf below + + "^audio-codec@[0-9a-f]+$": + type: object + additionalProperties: true # FIXME qcom,pm8916-wcd-analog-codec binding not converted yet + + "extcon@[0-9a-f]+$": + type: object + $ref: /schemas/extcon/qcom,pm8941-misc.yaml# + + "gpio(s)?@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml# + + "pon@[0-9a-f]+$": + type: object + $ref: /schemas/power/reset/qcom,pon.yaml# + + "^rtc@[0-9a-f]+$": + type: object + $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml# + + "^temp-alarm@[0-9a-f]+$": + type: object + $ref: /schemas/thermal/qcom,spmi-temp-alarm.yaml# + + "^vibrator@[0-9a-f]+$": + type: object + additionalProperties: true # FIXME qcom,pm8916-vib binding not converted yet + + "^mpps@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/qcom,pmic-mpp.yaml# + + "(.*)?(wled|leds)@[0-9a-f]+$": + type: object + $ref: /schemas/leds/backlight/qcom-wled.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8998 + then: + patternProperties: + "^adc-tm@[0-9a-f]+$": + $ref: /schemas/thermal/qcom-spmi-adc-tm-hc.yaml# + else: + patternProperties: + "^adc-tm@[0-9a-f]+$": + $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml# + +additionalProperties: false + +examples: + - | + #include + #include + #include + + spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0c440000 0x1100>, + <0x0c600000 0x2000000>, + <0x0e600000 0x100000>, + <0x0e700000 0xa0000>, + <0x0c40a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + + pmi8998_lsid0: pmic@2 { + compatible = "qcom,pmi8998", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi8998_gpio: gpios@c000 { + compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pmi8998_gpio 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; + + - | + #include + #include + #include + #include + #include + + pmic@0 { + compatible = "qcom,pm6150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; + }; + + temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm6150_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm6150_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@6 { + reg = ; + label = "die_temp"; + }; + + adc-chan@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + }; + + adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + charger-thermistor@0 { + reg = <0>; + io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + }; + + pm6150_gpio: gpios@c000 { + compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm6150_gpio 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml new file mode 100644 index 000000000..b12809b5c --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qcom,tcsr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Top Control and Status Register + +maintainers: + - Bjorn Andersson + +description: + Qualcomm devices have a set of registers that provide various control and + status functions for their peripherals. + +properties: + compatible: + items: + - enum: + - qcom,msm8998-tcsr + - qcom,qcs404-tcsr + - qcom,sc7180-tcsr + - qcom,sc7280-tcsr + - qcom,sdm630-tcsr + - qcom,sdm845-tcsr + - qcom,sm8150-tcsr + - qcom,tcsr-apq8064 + - qcom,tcsr-apq8084 + - qcom,tcsr-ipq6018 + - qcom,tcsr-ipq8064 + - qcom,tcsr-mdm9615 + - qcom,tcsr-msm8660 + - qcom,tcsr-msm8916 + - qcom,tcsr-msm8953 + - qcom,tcsr-msm8960 + - qcom,tcsr-msm8974 + - qcom,tcsr-msm8996 + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@1a400000 { + compatible = "qcom,tcsr-msm8960", "syscon"; + reg = <0x1a400000 0x100>; + }; diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml new file mode 100644 index 000000000..61bd0b3ce --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8xxx PMIC multi-function devices + +maintainers: + - Satya Priya + +description: | + The PM8xxx family of Power Management ICs are used to provide regulated + voltages and other various functionality to Qualcomm SoCs. + +properties: + compatible: + enum: + - qcom,pm8018 + - qcom,pm8058 + - qcom,pm8821 + - qcom,pm8921 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + interrupts: + maxItems: 1 + + '#interrupt-cells': + const: 2 + + interrupt-controller: true + +patternProperties: + "rtc@[0-9a-f]+$": + type: object + $ref: "../rtc/qcom-pm8xxx-rtc.yaml" + +required: + - compatible + - '#address-cells' + - '#size-cells' + - interrupts + - '#interrupt-cells' + - interrupt-controller + +additionalProperties: false +... diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt new file mode 100644 index 000000000..b823b8625 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt @@ -0,0 +1,283 @@ +Qualcomm Resource Power Manager (RPM) + +This driver is used to interface with the Resource Power Manager (RPM) found in +various Qualcomm platforms. The RPM allows each component in the system to vote +for state of the system resources, such as clocks, regulators and bus +frequencies. + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,rpm-apq8064" + "qcom,rpm-msm8660" + "qcom,rpm-msm8960" + "qcom,rpm-ipq8064" + "qcom,rpm-mdm9615" + +- reg: + Usage: required + Value type: + Definition: base address and size of the RPM's message ram + +- interrupts: + Usage: required + Value type: + Definition: three entries specifying the RPM's: + 1. acknowledgement interrupt + 2. error interrupt + 3. wakeup interrupt + +- interrupt-names: + Usage: required + Value type: + Definition: must be the three strings "ack", "err" and "wakeup", in order + +- qcom,ipc: + Usage: required + Value type: + + Definition: three entries specifying the outgoing ipc bit used for + signaling the RPM: + - phandle to a syscon node representing the apcs registers + - u32 representing offset to the register within the syscon + - u32 representing the ipc bit within the register + + += SUBNODES + +The RPM exposes resources to its subnodes. The below bindings specify the set +of valid subnodes that can operate on these resources. + +== Regulators + +Regulator nodes are identified by their compatible: + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,rpm-pm8058-regulators" + "qcom,rpm-pm8901-regulators" + "qcom,rpm-pm8921-regulators" + "qcom,rpm-pm8018-regulators" + "qcom,rpm-smb208-regulators" + +- vdd_l0_l1_lvs-supply: +- vdd_l2_l11_l12-supply: +- vdd_l3_l4_l5-supply: +- vdd_l6_l7-supply: +- vdd_l8-supply: +- vdd_l9-supply: +- vdd_l10-supply: +- vdd_l13_l16-supply: +- vdd_l14_l15-supply: +- vdd_l17_l18-supply: +- vdd_l19_l20-supply: +- vdd_l21-supply: +- vdd_l22-supply: +- vdd_l23_l24_l25-supply: +- vdd_ncp-supply: +- vdd_s0-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: + Usage: optional (pm8058 only) + Value type: + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- lvs0_in-supply: +- lvs1_in-supply: +- lvs2_in-supply: +- lvs3_in-supply: +- mvs_in-supply: +- vdd_l0-supply: +- vdd_l1-supply: +- vdd_l2-supply: +- vdd_l3-supply: +- vdd_l4-supply: +- vdd_l5-supply: +- vdd_l6-supply: +- vdd_s0-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: + Usage: optional (pm8901 only) + Value type: + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- vdd_l1_l2_l12_l18-supply: +- vdd_l3_l15_l17-supply: +- vdd_l4_l14-supply: +- vdd_l5_l8_l16-supply: +- vdd_l6_l7-supply: +- vdd_l9_l11-supply: +- vdd_l10_l22-supply: +- vdd_l21_l23_l29-supply: +- vdd_l24-supply: +- vdd_l25-supply: +- vdd_l26-supply: +- vdd_l27-supply: +- vdd_l28-supply: +- vdd_ncp-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s4-supply: +- vdd_s5-supply: +- vdd_s6-supply: +- vdd_s7-supply: +- vdd_s8-supply: +- vin_5vs-supply: +- vin_lvs1_3_6-supply: +- vin_lvs2-supply: +- vin_lvs4_5_7-supply: + Usage: optional (pm8921 only) + Value type: + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- vin_lvs1-supply: +- vdd_l7-supply: +- vdd_l8-supply: +- vdd_l9_l10_l11_l12-supply: + Usage: optional (pm8018 only) + Value type: + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +The regulator node houses sub-nodes for each regulator within the device. Each +sub-node is identified using the node's name, with valid values listed for each +of the pmics below. + +pm8058: + l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, + l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4, + lvs0, lvs1, ncp + +pm8901: + l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3, + mvs + +pm8921: + s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28, + l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch, + ncp + +pm8018: + s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l14, lvs1 + +smb208: + s1a, s1b, s2a, s2b + +The content of each sub-node is defined by the standard binding for regulators - +see regulator.txt - with additional custom properties described below: + +=== Switch-mode Power Supply regulator custom properties + +- bias-pull-down: + Usage: optional + Value type: + Definition: enable pull down of the regulator when inactive + +- qcom,switch-mode-frequency: + Usage: required + Value type: + Definition: Frequency (Hz) of the switch-mode power supply; + must be one of: + 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, + 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, + 1480000, 1370000, 1280000, 1200000 + +- qcom,force-mode: + Usage: optional (default if no other qcom,force-mode is specified) + Value type: + Definition: indicates that the regulator should be forced to a + particular mode, valid values are: + QCOM_RPM_FORCE_MODE_NONE - do not force any mode + QCOM_RPM_FORCE_MODE_LPM - force into low power mode + QCOM_RPM_FORCE_MODE_HPM - force into high power mode + QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically + select its own mode based on + realtime current draw, only for: + pm8921 smps and ftsmps + +- qcom,power-mode-hysteretic: + Usage: optional + Value type: + Definition: select that the power supply should operate in hysteretic + mode, instead of the default pwm mode + +=== Low-dropout regulator custom properties + +- bias-pull-down: + Usage: optional + Value type: + Definition: enable pull down of the regulator when inactive + +- qcom,force-mode: + Usage: optional + Value type: + Definition: indicates that the regulator should not be forced to any + particular mode, valid values are: + QCOM_RPM_FORCE_MODE_NONE - do not force any mode + QCOM_RPM_FORCE_MODE_LPM - force into low power mode + QCOM_RPM_FORCE_MODE_HPM - force into high power mode + QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass + mode, i.e. to act as a switch + and not regulate, only for: + pm8921 pldo, nldo and nldo1200 + +=== Negative Charge Pump custom properties + +- qcom,switch-mode-frequency: + Usage: required + Value type: + Definition: Frequency (Hz) of the switch mode power supply; + must be one of: + 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, + 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, + 1480000, 1370000, 1280000, 1200000 + += EXAMPLE + + #include + + rpm@108000 { + compatible = "qcom,rpm-msm8960"; + reg = <0x108000 0x1000>; + qcom,ipc = <&apcs 0x8 2>; + + interrupts = <0 19 0>, <0 21 0>, <0 22 0>; + interrupt-names = "ack", "err", "wakeup"; + + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + + s1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + bias-pull-down; + + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + + qcom,force-mode = ; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/mfd/qriox.txt b/Documentation/devicetree/bindings/mfd/qriox.txt new file mode 100644 index 000000000..f301e2d4c --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qriox.txt @@ -0,0 +1,17 @@ +KEYMILE qrio Board Control CPLD + +The qrio is a multifunction device that controls the KEYMILE boards based on +the kmp204x design. +It is consists of a reset controller, watchdog timer, LEDs, and 2 IRQ capable +GPIO blocks. + +Required properties: +- compatible: "keymile,qriox" +- reg: access on the parent local bus (chip select, offset in chip select, size) + +Example: + + board-control@1,0 { + compatible = "keymile,qriox"; + reg = <1 0 0x80>; + }; diff --git a/Documentation/devicetree/bindings/mfd/retu.txt b/Documentation/devicetree/bindings/mfd/retu.txt new file mode 100644 index 000000000..df3005dd3 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/retu.txt @@ -0,0 +1,24 @@ +* Device tree bindings for Nokia Retu and Tahvo multi-function device + +Retu and Tahvo are a multi-function devices found on Nokia Internet +Tablets (770, N800 and N810). The Retu chip provides watchdog timer +and power button control functionalities while Tahvo chip provides +USB transceiver functionality. + +Required properties: +- compatible: "nokia,retu" or "nokia,tahvo" +- reg: Specifies the CBUS slave address of the ASIC chip +- interrupts: The interrupt line the device is connected to + +Example: + +cbus0 { + compatible = "i2c-cbus-gpio"; + ... + retu: retu@1 { + compatible = "nokia,retu"; + interrupt-parent = <&gpio4>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; + reg = <0x1>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml new file mode 100644 index 000000000..4762eb143 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/richtek,rt4831.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4831 DSV and Backlight Integrated IC + +maintainers: + - ChiYuan Huang + +description: | + RT4831 is a multifunctional device that can provide power to the LCD display + and LCD backlight. + + For Display Bias Voltage DSVP and DSVN, the output range is about 4V to 6.5V. + It's sufficient to meet the current LCD power requirement. + + For the LCD backlight, it can provide four channel WLED driving capability. + Each channel driving current is up to 30mA + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf + +properties: + compatible: + const: richtek,rt4831 + + reg: + description: I2C device address. + maxItems: 1 + + enable-gpios: + description: | + GPIO to enable/disable the chip. It is optional. + Some usage directly tied this pin to follow VIO 1.8V power on sequence. + maxItems: 1 + + regulators: + $ref: ../regulator/richtek,rt4831-regulator.yaml + + backlight: + $ref: ../leds/backlight/richtek,rt4831-backlight.yaml + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt4831@11 { + compatible = "richtek,rt4831"; + reg = <0x11>; + + regulators { + DSVLCM { + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <7150000>; + regulator-allow-bypass; + }; + DSVP { + regulator-name = "rt4831-dsvp"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + regulator-boot-on; + }; + DSVN { + regulator-name = "rt4831-dsvn"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + regulator-boot-on; + }; + }; + + backlight { + compatible = "richtek,rt4831-backlight"; + default-brightness = <1024>; + max-brightness = <2048>; + richtek,bled-ovp-sel = /bits/ 8 ; + richtek,channel-use = /bits/ 8 ; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml new file mode 100644 index 000000000..f73b8b25d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/richtek,rt5120.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5120 PMIC + +maintainers: + - ChiYuan Huang + +description: | + The RT5120 provides four high-efficiency buck converters and one LDO voltage + regulator. The device is targeted at providingthe processor voltage, memory, + I/O, and peripheral rails in home entertainment devices. The I2C interface is + used for dynamic voltage scaling of the processor voltage, power rails on/off + sequence control, operation mode selection. + +properties: + compatible: + enum: + - richtek,rt5120 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + wakeup-source: true + + richtek,enable-undervolt-hiccup: + type: boolean + description: | + If used, under voltage protection trigger hiccup behavior, else latchup as + default + + richtek,enable-overvolt-hiccup: + type: boolean + description: + Like as 'enable-uv-hiccup', it configures over voltage protection to + hiccup, else latchup as default + + vin1-supply: + description: phandle for buck1 input power source + + vin2-supply: + description: phandle for buck2 input power source + + vin3-supply: + description: phandle for buck3 input power source + + vin4-supply: + description: phandle for buck4 input power source + + vinldo-supply: + description: phandle for ldo input power source + + regulators: + type: object + + patternProperties: + "^buck[1-4]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + regulator-allowed-modes: + description: | + Used to specify the allowed buck converter operating mode + mode mapping: + 0: auto mode + 1: force pwm mode + items: + enum: [0, 1] + + "^(ldo|exten)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + additionalProperties: false + + powerkey: + type: object + description: + PON key that connected to RT5120 PMIC. + + properties: + compatible: + enum: + - richtek,rt5120-pwrkey + + required: + - compatible + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - '#interrupt-cells' + - interrupt-controller + - regulators + - powerkey + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@62 { + compatible = "richtek,rt5120"; + reg = <0x62>; + interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + wakeup-source; + + regulators { + buck1 { + regulator-name = "rt5120-buck1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1393750>; + regulator-allowed-modes = <0 1>; + regulator-boot-on; + }; + buck2 { + regulator-name = "rt5120-buck2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + buck3 { + regulator-name = "rt5120-buck3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + buck4 { + regulator-name = "rt5120-buck4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + ldo { + regulator-name = "rt5120-ldo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + exten { + regulator-name = "rt5120-exten"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; + powerkey { + compatible = "richtek,rt5120-pwrkey"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml new file mode 100644 index 000000000..032a7fb0b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ricoh,rn5t618.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ricoh RN5T567/RN5T618/RC5T619 PMIC + +maintainers: + - Andreas Kemnade + +description: | + Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which + integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators, + GPIOs, and a watchdog timer. It can be controlled through an I2C interface. + The RN5T618/RC5T619 provides additionally a Li-ion battery charger, + fuel gauge, and an ADC. + The RC5T619 additionally includes USB charger detection and an RTC. + +allOf: + - if: + properties: + compatible: + contains: + const: ricoh,rn5t567 + then: + properties: + regulators: + patternProperties: + "^(DCDC[1-4]|LDO[1-5]|LDORTC[12])$": + $ref: ../regulator/regulator.yaml + additionalProperties: false + - if: + properties: + compatible: + contains: + const: ricoh,rn5t618 + then: + properties: + regulators: + patternProperties: + "^(DCDC[1-3]|LDO[1-5]|LDORTC[12])$": + $ref: ../regulator/regulator.yaml + additionalProperties: false + - if: + properties: + compatible: + contains: + const: ricoh,rc5t619 + then: + properties: + regulators: + patternProperties: + "^(DCDC[1-5]|LDO[1-9]|LDO10|LDORTC[12])$": + $ref: ../regulator/regulator.yaml + additionalProperties: false + +properties: + compatible: + enum: + - ricoh,rn5t567 + - ricoh,rn5t618 + - ricoh,rc5t619 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + system-power-controller: + type: boolean + description: | + See Documentation/devicetree/bindings/power/power-controller.txt + + regulators: + type: object + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@32 { + compatible = "ricoh,rn5t618"; + reg = <0x32>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + system-power-controller; + + regulators { + DCDC1 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + DCDC2 { + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1175000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml new file mode 100644 index 000000000..4992f71b6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk805.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK805 Power Management Integrated Circuit + +maintainers: + - Chris Zhong + - Zhang Qing + +description: | + Rockchip RK805 series PMIC. This device consists of an i2c controlled MFD + that includes multiple switchable regulators. + +properties: + compatible: + enum: + - rockchip,rk805 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: + See for clock IDs. + minimum: 0 + maximum: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + gpio-controller: true + + '#gpio-cells': + const: 2 + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc6-supply: + description: + The input supply for LDO_REG3. + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|LDO_REG[1-3])$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + +allOf: + - if: + properties: + '#clock-cells': + const: 0 + + then: + properties: + clock-output-names: + maxItems: 1 + + else: + properties: + clock-output-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <0>; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_18: LDO_REG1 { + regulator-name = "vdd_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc_18emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_11: LDO_REG3 { + regulator-name = "vdd_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml new file mode 100644 index 000000000..f5908fa01 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml @@ -0,0 +1,257 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk808.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK808 Power Management Integrated Circuit + +maintainers: + - Chris Zhong + - Zhang Qing + +description: | + Rockchip RK808 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and a power button. + +properties: + compatible: + enum: + - rockchip,rk808 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: + See for clock IDs. + const: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + maxItems: 2 + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc6-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc7-supply: + description: + The input supply for LDO_REG3 and LDO_REG7. + + vcc8-supply: + description: + The input supply for SWITCH_REG1. + + vcc9-supply: + description: + The input supply for LDO_REG4 and LDO_REG5. + + vcc10-supply: + description: + The input supply for LDO_REG6. + + vcc11-supply: + description: + The input supply for LDO_REG8. + + vcc12-supply: + description: + The input supply for SWITCH_REG2. + + vddio-supply: + description: + The input supply for digital IO. + + dvs-gpios: + description: | + buck1/2 can be controlled by gpio dvs, this is GPIO specifiers for + 2 host gpio's used for dvs. The format of the gpio specifier + depends in the gpio controller. If DVS GPIOs aren't present, + voltage changes will happen very quickly with no slow ramp time. + maxItems: 2 + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + clock-output-names = "xin32k", "rk808-clkout2"; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, + <&gpio7 15 GPIO_ACTIVE_HIGH>; + reg = <0x1b>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc8-supply = <&vcc_18>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vccio_pmu>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd_arm"; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + }; + + vccio_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_pmu"; + }; + + vcc_tp: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_tp"; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + }; + + vcc18_lcd: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + }; + + vcca_codec: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_codec"; + }; + + vcc_wl: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_wl"; + }; + + vcc_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_lcd"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml new file mode 100644 index 000000000..7fb849ac7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml @@ -0,0 +1,284 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK809 Power Management Integrated Circuit + +maintainers: + - Chris Zhong + - Zhang Qing + +description: | + Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and power button. + +properties: + compatible: + enum: + - rockchip,rk809 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: | + See for clock IDs. + minimum: 0 + maximum: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. + + vcc6-supply: + description: + The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. + + vcc7-supply: + description: + The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. + + vcc8-supply: + description: + The input supply for SWITCH_REG1. + + vcc9-supply: + description: + The input supply for DCDC_REG5 and SWITCH_REG2. + + regulators: + type: object + patternProperties: + "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + +allOf: + - if: + properties: + '#clock-cells': + const: 0 + + then: + properties: + clock-output-names: + maxItems: 1 + + else: + properties: + clock-output-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + interrupt-parent = <&gpio3>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l_pin>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sysin>; + vcc2-supply = <&vcc_sysin>; + vcc3-supply = <&vcc_sysin>; + vcc4-supply = <&vcc_sysin>; + vcc6-supply = <&vcc_sysin>; + vcc7-supply = <&vcc_sysin>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sysin>; + vcc10-supply = <&vcc_sysin>; + vcc11-supply = <&vcc_sysin>; + vcc12-supply = <&vcc3v3_sys>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: vcc_wl: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_pmupll: LDO_REG3 { + regulator-name = "vcc1v8_pmupll"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml new file mode 100644 index 000000000..935e17099 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml @@ -0,0 +1,382 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK817 Power Management Integrated Circuit + +maintainers: + - Chris Zhong + - Zhang Qing + +description: | + Rockchip RK817 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, a power button, an audio codec, and a + battery charger manager. + +properties: + compatible: + enum: + - rockchip,rk817 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: + See for clock IDs. + minimum: 0 + maximum: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. + + vcc6-supply: + description: + The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. + + vcc7-supply: + description: + The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. + + vcc8-supply: + description: + The input supply for BOOST. + + vcc9-supply: + description: + The input supply for OTG_SWITCH. + + regulators: + type: object + patternProperties: + "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$": + type: object + unevaluatedProperties: false + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + clocks: + description: + The input clock for the audio codec. + + clock-names: + description: + The clock name for the codec clock. + items: + - const: mclk + + '#sound-dai-cells': + description: + Needed for the interpretation of sound dais. + const: 0 + + codec: + description: | + The child node for the codec to hold additional properties. If no + additional properties are required for the codec, this node can be + omitted. + type: object + additionalProperties: false + properties: + rockchip,mic-in-differential: + type: boolean + description: + Describes if the microphone uses differential mode. + + charger: + description: | + The child node for the charger to hold additional properties. If a + battery is not in use, this node can be omitted. + type: object + properties: + monitored-battery: + description: | + A phandle to a monitored battery node that contains a valid + value for: + charge-full-design-microamp-hours, + charge-term-current-microamp, + constant-charge-current-max-microamp, + constant-charge-voltage-max-microvolt, + voltage-max-design-microvolt, + voltage-min-design-microvolt, + and a valid ocv-capacity table. + + rockchip,resistor-sense-micro-ohms: + description: | + Value in microohms of the battery sense resistor. This value is + used by the driver to set the correct divisor value to translate + ADC readings into the proper units of measure. + enum: [10000, 20000] + + rockchip,sleep-enter-current-microamp: + description: | + Value in microamps of the sleep enter current for the charger. + Value is used by the driver to calibrate the relax threshold. + + rockchip,sleep-filter-current-microamp: + description: + Value in microamps of the sleep filter current for the charger. + Value is used by the driver to derive the sleep sample current. + + required: + - monitored-battery + - rockchip,resistor-sense-micro-ohms + - rockchip,sleep-enter-current-microamp + - rockchip,sleep-filter-current-microamp + + additionalProperties: false + +allOf: + - if: + properties: + '#clock-cells': + const: 0 + + then: + properties: + clock-output-names: + maxItems: 1 + + else: + properties: + clock-output-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = ; + clock-output-names = "rk808-clkout1", "xin32k"; + clock-names = "mclk"; + clocks = <&cru SCLK_I2S1_OUT>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; + wakeup-source; + #clock-cells = <1>; + #sound-dai-cells = <0>; + + vcc1-supply = <&vccsys>; + vcc2-supply = <&vccsys>; + vcc3-supply = <&vccsys>; + vcc4-supply = <&vccsys>; + vcc5-supply = <&vccsys>; + vcc6-supply = <&vccsys>; + vcc7-supply = <&vccsys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v3_pmu: LDO_REG4 { + regulator-name = "vcc3v3_pmu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_bl: LDO_REG7 { + regulator-name = "vcc_bl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lcd: LDO_REG8 { + regulator-name = "vcc_lcd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc_cam: LDO_REG9 { + regulator-name = "vcc_cam"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; + + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + + rk817_codec: codec { + rockchip,mic-in-differential; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml new file mode 100644 index 000000000..b57c4b005 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml @@ -0,0 +1,282 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk818.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK818 Power Management Integrated Circuit + +maintainers: + - Chris Zhong + - Zhang Qing + +description: | + Rockchip RK818 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and a power button. + +properties: + compatible: + enum: + - rockchip,rk818 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: | + See for clock IDs. + const: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + maxItems: 2 + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + boost-supply: + description: + The input supply for DCDC_BOOST + + vcc6-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc7-supply: + description: + The input supply for LDO_REG3, LDO_REG5, and LDO_REG7. + + vcc8-supply: + description: + The input supply for LDO_REG4, LDO_REG6, and LDO_REG8. + + vcc9-supply: + description: + The input supply for LDO_REG9 and SWITCH_REG. + + vddio-supply: + description: + The input supply for digital IO. + + h_5v-supply: + description: + The input supply for HDMI_SWITCH. + + usb-supply: + description: + The input supply for OTG_SWITCH. + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|DCDC_BOOST|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk818: pmic@1c { + compatible = "rockchip,rk818"; + reg = <0x1c>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc1-supply = <&vdd_sys>; + vcc2-supply = <&vdd_sys>; + vcc3-supply = <&vdd_sys>; + vcc4-supply = <&vdd_sys>; + boost-supply = <&vdd_in_otg_out>; + vcc6-supply = <&vdd_sys>; + vcc7-supply = <&vdd_misc_1v8>; + vcc8-supply = <&vdd_misc_1v8>; + vcc9-supply = <&vdd_3v3_io>; + vddio-supply = <&vdd_3v3_io>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_3v3_io: DCDC_REG4 { + regulator-name = "vdd_3v3_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_sys: DCDC_BOOST { + regulator-name = "vdd_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <5000000>; + }; + }; + + vdd_sd: SWITCH_REG { + regulator-name = "vdd_sd"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_eth_2v5: LDO_REG2 { + regulator-name = "vdd_eth_2v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2500000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_1v8_lcd_ldo: LDO_REG4 { + regulator-name = "vdd_1v8_lcd_ldo"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0_lcd: LDO_REG6 { + regulator-name = "vdd_1v0_lcd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_1v8_ldo: LDO_REG7 { + regulator-name = "vdd_1v8_ldo"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_io_sd: LDO_REG9 { + regulator-name = "vdd_io_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml new file mode 100644 index 000000000..fbface720 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml @@ -0,0 +1,201 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd71815-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71815 Power Management Integrated Circuit bindings + +maintainers: + - Matti Vaittinen + +description: | + BD71815AGW is a single-chip power management ICs for battery-powered + portable devices. It integrates 5 buck converters, 8 LDOs, a boost driver + for LED and a 500 mA single-cell linear charger. Also included is a Coulomb + counter, a real-time clock (RTC), and a 32.768 kHz clock gate and two GPOs. + +properties: + compatible: + const: rohm,bd71815 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is the pin number and the second cell is used to specify + flags. See ../gpio/gpio.txt for more information. + + clocks: + maxItems: 1 + + "#clock-cells": + const: 0 + + clock-output-names: + const: bd71815-32k-out + + rohm,clkout-open-drain: + description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos". + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1 + + rohm,charger-sense-resistor-ohms: + minimum: 10000000 + maximum: 50000000 + description: | + BD71827 and BD71828 have SAR ADC for measuring charging currents. + External sense resistor (RSENSE in data sheet) should be used. If + something other but 30MOhm resistor is used the resistance value + should be given here in Ohms. + default: 30000000 + + regulators: + $ref: ../regulator/rohm,bd71815-regulator.yaml + description: + List of child nodes that specify the regulators. + + gpio-reserved-ranges: + description: | + Usage of BD71828 GPIO pins can be changed via OTP. This property can be + used to mark the pins which should not be configured for GPIO. Please see + the ../gpio/gpio.txt for more information. + + rohm,enable-hidden-gpo: + description: | + The BD71815 has undocumented GPO at pin E5. Pin is marked as GND at the + data-sheet as its location in the middle of GND pins makes it hard to + use on PCB. If your board has managed to use this pin you can enable the + second GPO by defining this property. Dont enable this if you are unsure + about how the E5 pin is connected on your board. + type: boolean + +required: + - compatible + - reg + - interrupts + - clocks + - "#clock-cells" + - regulators + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@4b { + compatible = "rohm,bd71815"; + reg = <0x4b>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + clocks = <&osc 0>; + #clock-cells = <0>; + clock-output-names = "bd71815-32k-out"; + + gpio-controller; + #gpio-cells = <2>; + + rohm,charger-sense-resistor-ohms = <10000000>; + + regulators { + buck1: buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1150000>; + rohm,dvs-suspend-voltage = <950000>; + }; + buck2: buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1150000>; + rohm,dvs-suspend-voltage = <950000>; + }; + buck3: buck3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + buck4: buck4 { + regulator-name = "buck4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-always-on; + }; + buck5: buck5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo1: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo2: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo3: ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo4: ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo5: ldo5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo6: ldodvref { + regulator-name = "ldodvref"; + regulator-always-on; + }; + ldo7: ldolpsr { + regulator-name = "ldolpsr"; + regulator-always-on; + }; + + boost: wled { + regulator-name = "wled"; + regulator-min-microamp = <10>; + regulator-max-microamp = <25000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml new file mode 100644 index 000000000..8380166d1 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml @@ -0,0 +1,204 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71828 Power Management Integrated Circuit bindings + +maintainers: + - Matti Vaittinen + +description: | + BD71828GW is a single-chip power management IC for battery-powered portable + devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA + single-cell linear charger. Also included is a Coulomb counter, a real-time + clock (RTC), and a 32.768 kHz clock gate. + +properties: + compatible: + const: rohm,bd71828 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is the pin number and the second cell is used to specify + flags. See ../gpio/gpio.txt for more information. + + clocks: + maxItems: 1 + + "#clock-cells": + const: 0 + + clock-output-names: + const: bd71828-32k-out + + rohm,clkout-open-drain: + description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos". + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1 + + rohm,charger-sense-resistor-ohms: + minimum: 10000000 + maximum: 50000000 + description: | + BD71827 and BD71828 have SAR ADC for measuring charging currents. + External sense resistor (RSENSE in data sheet) should be used. If some + other but 30MOhm resistor is used the resistance value should be given + here in Ohms. + + regulators: + $ref: ../regulator/rohm,bd71828-regulator.yaml + description: + List of child nodes that specify the regulators. + + leds: + $ref: ../leds/rohm,bd71828-leds.yaml + + gpio-reserved-ranges: + description: | + Usage of BD71828 GPIO pins can be changed via OTP. This property can be + used to mark the pins which should not be configured for GPIO. Please see + the ../gpio/gpio.txt for more information. + +required: + - compatible + - reg + - interrupts + - clocks + - "#clock-cells" + - regulators + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@4b { + compatible = "rohm,bd71828"; + reg = <0x4b>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + clocks = <&osc 0>; + #clock-cells = <0>; + clock-output-names = "bd71828-32k-out"; + + gpio-controller; + #gpio-cells = <2>; + gpio-reserved-ranges = <0 1>, <2 1>; + + rohm,charger-sense-resistor-ohms = <10000000>; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <2500>; + }; + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <2500>; + }; + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2000000>; + }; + buck4: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + }; + buck5: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + buck6: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <2500>; + }; + buck7: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <2500>; + }; + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo4: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo5: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo6: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo7_reg: LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + }; + + leds { + compatible = "rohm,bd71828-leds"; + + led-1 { + rohm,led-compatible = "bd71828-grnled"; + function = LED_FUNCTION_INDICATOR; + color = ; + }; + led-2 { + rohm,led-compatible = "bd71828-ambled"; + function = LED_FUNCTION_CHARGING; + color = ; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml new file mode 100644 index 000000000..3bfdd3370 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml @@ -0,0 +1,244 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd71837-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71837 Power Management Integrated Circuit bindings + +maintainers: + - Matti Vaittinen + +description: | + BD71837MWV is programmable Power Management ICs for powering single-core, + dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is optimized for low + BOM cost and compact solution footprint. BD71837MWV integrates 8 Buck + regulators and 7 LDOs. + Datasheet for BD71837 is available at + https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71837amwv-product + +properties: + compatible: + const: rohm,bd71837 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: osc + + "#clock-cells": + const: 0 + + clock-output-names: + const: pmic_clk + +# The BD718x7 supports two different HW states as reset target states. States +# are called as SNVS and READY. At READY state all the PMIC power outputs go +# down and OTP is reload. At the SNVS state all other logic and external +# devices apart from the SNVS power domain are shut off. Please refer to NXP +# i.MX8 documentation for further information regarding SNVS state. When a +# reset is done via SNVS state the PMIC OTP data is not reload. This causes +# power outputs that have been under SW control to stay down when reset has +# switched power state to SNVS. If reset is done via READY state the power +# outputs will be returned to HW control by OTP loading. Thus the reset +# target state is set to READY by default. If SNVS state is used the boot +# crucial regulators must have the regulator-always-on and regulator-boot-on +# properties set in regulator node. + + rohm,reset-snvs-powered: + description: | + Transfer PMIC to SNVS state at reset + type: boolean + +# Configure the "short press" and "long press" timers for the power button. +# Values are rounded to what hardware supports +# Short-press: +# Shortest being 10ms, next 500ms and then multiple of 500ms up to 7,5s +# Long-press: +# Shortest being 10ms, next 1000ms and then multiple of 1000ms up to 15s +# If these properties are not present the existing configuration (from +# bootloader or OTP) is not touched. + + rohm,short-press-ms: + description: + Short press duration in milliseconds + enum: + - 10 + - 500 + - 1000 + - 1500 + - 2000 + - 2500 + - 3000 + - 3500 + - 4000 + - 4500 + - 5000 + - 5500 + - 6000 + - 6500 + - 7000 + + rohm,long-press-ms: + description: + Long press duration in milliseconds + enum: + - 10 + - 1000 + - 2000 + - 3000 + - 4000 + - 5000 + - 6000 + - 7000 + - 8000 + - 9000 + - 10000 + - 11000 + - 12000 + - 13000 + - 14000 + + regulators: + $ref: ../regulator/rohm,bd71837-regulator.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - reg + - interrupts + - clocks + - "#clock-cells" + - regulators + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@4b { + compatible = "rohm,bd71837"; + reg = <0x4b>; + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clocks = <&osc 0>; + rohm,reset-snvs-powered; + rohm,short-press-ms = <10>; + rohm,long-press-ms = <2000>; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <900000>; + rohm,dvs-idle-voltage = <850000>; + rohm,dvs-suspend-voltage = <800000>; + }; + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + rohm,dvs-run-voltage = <1000000>; + }; + buck4: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + rohm,dvs-run-voltage = <1000000>; + }; + buck5: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + }; + buck6: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + buck7: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + }; + buck8: BUCK8 { + regulator-name = "buck8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + }; + + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + }; + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + ldo4: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + }; + ldo5: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + ldo6: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + }; + ldo7_reg: LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml new file mode 100644 index 000000000..5d531051a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml @@ -0,0 +1,229 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd71847-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71847 and BD71850 Power Management Integrated Circuit bindings + +maintainers: + - Matti Vaittinen + +description: | + BD71847AMWV and BD71850MWV are programmable Power Management ICs for powering + single-core, dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is + optimized for low BOM cost and compact solution footprint. BD71847MWV and + BD71850MWV integrate 6 Buck regulators and 6 LDOs. + Datasheets are available at + https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71847amwv-product + https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71850mwv-product + +properties: + compatible: + enum: + - rohm,bd71847 + - rohm,bd71850 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + "#clock-cells": + const: 0 + + clock-output-names: + maxItems: 1 + +# The BD71847 abd BD71850 support two different HW states as reset target +# states. States are called as SNVS and READY. At READY state all the PMIC +# power outputs go down and OTP is reload. At the SNVS state all other logic +# and external devices apart from the SNVS power domain are shut off. Please +# refer to NXP i.MX8 documentation for further information regarding SNVS +# state. When a reset is done via SNVS state the PMIC OTP data is not reload. +# This causes power outputs that have been under SW control to stay down when +# reset has switched power state to SNVS. If reset is done via READY state the +# power outputs will be returned to HW control by OTP loading. Thus the reset +# target state is set to READY by default. If SNVS state is used the boot +# crucial regulators must have the regulator-always-on and regulator-boot-on +# properties set in regulator node. + + rohm,reset-snvs-powered: + description: + Transfer PMIC to SNVS state at reset. + type: boolean + +# Configure the "short press" and "long press" timers for the power button. +# Values are rounded to what hardware supports +# Short-press: +# Shortest being 10ms, next 500ms and then multiple of 500ms up to 7,5s +# Long-press: +# Shortest being 10ms, next 1000ms and then multiple of 1000ms up to 15s +# If these properties are not present the existing # configuration (from +# bootloader or OTP) is not touched. + + rohm,short-press-ms: + description: + Short press duration in milliseconds + enum: + - 10 + - 500 + - 1000 + - 1500 + - 2000 + - 2500 + - 3000 + - 3500 + - 4000 + - 4500 + - 5000 + - 5500 + - 6000 + - 6500 + - 7000 + - 7500 + + rohm,long-press-ms: + description: + Long press duration in milliseconds + enum: + - 10 + - 1000 + - 2000 + - 3000 + - 4000 + - 5000 + - 6000 + - 7000 + - 8000 + - 9000 + - 10000 + - 11000 + - 12000 + - 13000 + - 14000 + - 15000 + + regulators: + $ref: ../regulator/rohm,bd71847-regulator.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - reg + - interrupts + - regulators + +additionalProperties: false + +dependencies: + '#clock-cells': [clocks] + clocks: ['#clock-cells'] + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clocks = <&osc 0>; + rohm,reset-snvs-powered; + rohm,short-press-ms = <10>; + rohm,long-press-ms = <2000>; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <900000>; + rohm,dvs-idle-voltage = <850000>; + rohm,dvs-suspend-voltage = <800000>; + }; + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + }; + buck4: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + buck5: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + }; + buck8: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + }; + + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + }; + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + ldo4: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + }; + ldo5: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo6: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml new file mode 100644 index 000000000..89f9efee4 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd9571mwv.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit (PMIC) + +maintainers: + - Marek Vasut + +properties: + compatible: + enum: + - rohm,bd9571mwv + - rohm,bd9574mwf + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + rohm,ddr-backup-power: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0xf + description: | + Value to use for DDR-Backup Power (default 0). + This is a bitmask that specifies which DDR power rails need to be kept + powered when backup mode is entered, for system suspend: + - bit 0: DDR0 + - bit 1: DDR1 + - bit 2: DDR0C + - bit 3: DDR1C + These bits match the KEEPON_DDR* bits in the documentation for the "BKUP + Mode Cnt" register. + + rohm,rstbmode-level: + $ref: /schemas/types.yaml#/definitions/flag + description: + The RSTB signal is configured for level mode, to accommodate a toggle + power switch (the RSTBMODE pin is strapped low). + + rohm,rstbmode-pulse: + $ref: /schemas/types.yaml#/definitions/flag + description: + The RSTB signal is configured for pulse mode, to accommodate a momentary + power switch (the RSTBMODE pin is strapped high). + + regulators: + type: object + description: + List of child nodes that specify the regulator initialization data. + Child nodes must be named after their hardware counterparts. + + patternProperties: + "^(vd09|vd18|vd25|vd33|dvfs)$": + type: object + $ref: ../regulator/regulator.yaml# + + properties: + regulator-name: + pattern: "^(vd09|vd18|vd25|vd33|dvfs)$" + + unevaluatedProperties: false + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + +oneOf: + - required: + - rohm,rstbmode-level + - required: + - rohm,rstbmode-pulse + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic: pmic@30 { + compatible = "rohm,bd9571mwv"; + reg = <0x30>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + rohm,ddr-backup-power = <0xf>; + rohm,rstbmode-pulse; + + regulators { + dvfs: dvfs { + regulator-name = "dvfs"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml new file mode 100644 index 000000000..6483860da --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd9576-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD9576MUF and BD9573MUF Power Management Integrated Circuit bindings + +maintainers: + - Matti Vaittinen + +description: | + BD9576MUF and BD9573MUF are power management ICs primarily intended for + powering the R-Car series processors. + The IC provides 6 power outputs with configurable sequencing and safety + monitoring. A watchdog logic with slow ping/windowed modes is also included. + +properties: + compatible: + enum: + - rohm,bd9576 + - rohm,bd9573 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + rohm,vout1-en-low: + description: + BD9576 and BD9573 VOUT1 regulator enable state can be individually + controlled by a GPIO. This is dictated by state of vout1-en pin during + the PMIC startup. If vout1-en is LOW during PMIC startup then the VOUT1 + enable sate is controlled via this pin. Set this property if vout1-en + is wired to be down at PMIC start-up. + type: boolean + + rohm,vout1-en-gpios: + description: + GPIO specifier to specify the GPIO connected to vout1-en for vout1 ON/OFF + state control. + maxItems: 1 + + rohm,ddr-sel-low: + description: + The BD9576 and BD9573 output voltage for DDR can be selected by setting + the ddr-sel pin low or high. Set this property if ddr-sel is grounded. + type: boolean + + rohm,watchdog-enable-gpios: + description: The GPIO line used to enable the watchdog. + maxItems: 1 + + rohm,watchdog-ping-gpios: + description: The GPIO line used to ping the watchdog. + maxItems: 1 + + rohm,hw-timeout-ms: + maxItems: 2 + description: + Watchog timeout in milliseconds. If single value is given it is + the maximum timeout. Eg. if pinging watchdog is not done within this time + limit the watchdog will be triggered. If two values are given watchdog + is configured in "window mode". Then first value is limit for short-ping + Eg. if watchdog is pinged sooner than that the watchdog will trigger. + When two values is given the second value is the maximum timeout. + # (HW) minimum for short timeout is 2ms, maximum 220 ms. + # (HW) minimum for max timeout is 4ms, maximum 4416 ms. + + regulators: + $ref: ../regulator/rohm,bd9576-regulator.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@30 { + compatible = "rohm,bd9576"; + reg = <0x30>; + rohm,vout1-en-low; + rohm,vout1-en-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + rohm,ddr-sel-low; + rohm,watchdog-enable-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + rohm,watchdog-ping-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + rohm,hw-timeout-ms = <150>, <2300>; + + regulators { + boost1: regulator-vd50 { + regulator-name = "VD50"; + }; + buck1: regulator-vd18 { + regulator-name = "VD18"; + }; + buck2: regulator-vdddr { + regulator-name = "VDDDR"; + }; + buck3: regulator-vd10 { + regulator-name = "VD10"; + }; + ldo: regulator-voutl1 { + regulator-name = "VOUTL1"; + }; + sw: regulator-vouts1 { + regulator-name = "VOUTS1"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml new file mode 100644 index 000000000..b97b06848 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/samsung,exynos5433-lpass.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Low Power Audio Subsystem (LPASS) + +maintainers: + - Krzysztof Kozlowski + - Sylwester Nawrocki + +properties: + compatible: + const: samsung,exynos5433-lpass + + '#address-cells': + const: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: sfr0_ctrl + + power-domains: + maxItems: 1 + + ranges: true + + reg: + minItems: 2 + maxItems: 2 + + '#size-cells': + const: 1 + +patternProperties: + "^dma-controller@[0-9a-f]+$": + $ref: /schemas/dma/arm,pl330.yaml + + "^i2s@[0-9a-f]+$": + $ref: /schemas/sound/samsung-i2s.yaml + + "^serial@[0-9a-f]+$": + $ref: /schemas/serial/samsung_uart.yaml + +required: + - compatible + - '#address-cells' + - clocks + - clock-names + - ranges + - reg + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include + #include + + audio-subsystem@11400000 { + compatible = "samsung,exynos5433-lpass"; + reg = <0x11400000 0x100>, <0x11500000 0x08>; + clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>; + clock-names = "sfr0_ctrl"; + power-domains = <&pd_aud>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dma-controller@11420000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11420000 0x1000>; + interrupts = ; + clocks = <&cmu_aud CLK_ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + dma-channels = <8>; + dma-requests = <32>; + power-domains = <&pd_aud>; + }; + + i2s@11440000 { + compatible = "samsung,exynos7-i2s"; + reg = <0x11440000 0x100>; + dmas = <&adma 0>, <&adma 2>; + dma-names = "tx", "rx"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, + <&cmu_aud CLK_SCLK_AUD_I2S>, + <&cmu_aud CLK_SCLK_I2S_BCLK>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + power-domains = <&pd_aud>; + #sound-dai-cells = <1>; + }; + + serial@11460000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x11460000 0x100>; + interrupts = ; + clocks = <&cmu_aud CLK_PCLK_AUD_UART>, + <&cmu_aud CLK_SCLK_AUD_UART>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart_aud_bus>; + power-domains = <&pd_aud>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml new file mode 100644 index 000000000..055dfc337 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/samsung,s2mpa01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPA01 Power Management IC + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The Samsung S2MPA01 is a Power Management IC which includes voltage + and current regulators, RTC, clock outputs and other sub-blocks. + +properties: + compatible: + const: samsung,s2mpa01-pmic + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + regulators: + $ref: ../regulator/samsung,s2mpa01.yaml + description: + List of child nodes that specify the regulators. + + wakeup-source: true + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s2mpa01-pmic"; + reg = <0x66>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_MMC2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + // ... + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50000>; + }; + + // ... + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml new file mode 100644 index 000000000..5ff6546c7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml @@ -0,0 +1,267 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/samsung,s2mps11.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPS11/13/14/15 and S2MPU02 Power Management IC + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The Samsung S2MPS11/13/14/15 and S2MPU02 is a family of Power Management IC + which include voltage and current regulators, RTC, clock outputs and other + sub-blocks. + +properties: + compatible: + enum: + - samsung,s2mps11-pmic + - samsung,s2mps13-pmic + - samsung,s2mps14-pmic + - samsung,s2mps15-pmic + - samsung,s2mpu02-pmic + + clocks: + $ref: ../clock/samsung,s2mps11.yaml + description: + Child node describing clock provider. + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + regulators: + type: object + description: + List of child nodes that specify the regulators. + + samsung,s2mps11-acokb-ground: + description: | + Indicates that ACOKB pin of S2MPS11 PMIC is connected to the ground so + the PMIC must manually set PWRHOLD bit in CTRL1 register to turn off the + power. Usually the ACOKB is pulled up to VBATT so when PWRHOLD pin goes + low, the rising ACOKB will trigger power off. + type: boolean + + samsung,s2mps11-wrstbi-ground: + description: | + Indicates that WRSTBI pin of PMIC is pulled down. When the system is + suspended it will always go down thus triggerring unwanted buck warm + reset (setting buck voltages to default values). + type: boolean + + wakeup-source: true + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,s2mps11-pmic + then: + properties: + regulators: + $ref: ../regulator/samsung,s2mps11.yaml + samsung,s2mps11-wrstbi-ground: false + + - if: + properties: + compatible: + contains: + const: samsung,s2mps13-pmic + then: + properties: + regulators: + $ref: ../regulator/samsung,s2mps13.yaml + samsung,s2mps11-acokb-ground: false + + - if: + properties: + compatible: + contains: + const: samsung,s2mps14-pmic + then: + properties: + regulators: + $ref: ../regulator/samsung,s2mps14.yaml + samsung,s2mps11-acokb-ground: false + samsung,s2mps11-wrstbi-ground: false + + - if: + properties: + compatible: + contains: + const: samsung,s2mps15-pmic + then: + properties: + regulators: + $ref: ../regulator/samsung,s2mps15.yaml + samsung,s2mps11-acokb-ground: false + samsung,s2mps11-wrstbi-ground: false + + - if: + properties: + compatible: + contains: + const: samsung,s2mpu02-pmic + then: + properties: + regulators: + $ref: ../regulator/samsung,s2mpu02.yaml + samsung,s2mps11-acokb-ground: false + samsung,s2mps11-wrstbi-ground: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s2mps11_irq>; + samsung,s2mps11-acokb-ground; + wakeup-source; + + clocks { + compatible = "samsung,s2mps11-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt"; + }; + + regulators { + LDO1 { + regulator-name = "vdd_ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + LDO4 { + regulator-name = "vdd_adc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + // .... + + BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-coupled-with = <&buck3_reg>; + regulator-coupled-max-spread = <300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-coupled-with = <&buck2_reg>; + regulator-coupled-max-spread = <300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + // ... + }; + }; + }; + + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s2mps14-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + + clocks { + compatible = "samsung,s2mps14-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps14_ap", "unused", "s2mps14_bt"; + }; + + regulators { + LDO1 { + regulator-name = "VLDO1_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + // ... + + BUCK1 { + regulator-name = "VBUCK1_1.0V"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + // ... + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml new file mode 100644 index 000000000..10c7b408f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml @@ -0,0 +1,307 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/samsung,s5m8767.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5M8767 Power Management IC + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The Samsung S5M8767 is a Power Management IC which includes voltage + and current regulators, RTC, clock outputs and other sub-blocks. + +properties: + compatible: + const: samsung,s5m8767-pmic + + clocks: + $ref: ../clock/samsung,s2mps11.yaml + description: + Child node describing clock provider. + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + regulators: + $ref: ../regulator/samsung,s5m8767.yaml + description: + List of child nodes that specify the regulators. + + s5m8767,pmic-buck2-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck2 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck3-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck3 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck4-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck4 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck-ds-gpios: + minItems: 3 + maxItems: 3 + description: | + GPIO specifiers for three host gpio's used for selecting GPIO DVS lines. + It is one-to-one mapped to dvs gpio lines. + + s5m8767,pmic-buck2-uses-gpio-dvs: + type: boolean + description: buck2 can be controlled by gpio dvs. + + s5m8767,pmic-buck3-uses-gpio-dvs: + type: boolean + description: buck3 can be controlled by gpio dvs. + + s5m8767,pmic-buck4-uses-gpio-dvs: + type: boolean + description: buck4 can be controlled by gpio dvs. + + s5m8767,pmic-buck-default-dvs-idx: + $ref: /schemas/types.yaml#/definitions/uint32-array + minimum: 0 + maximum: 7 + default: 0 + description: | + Default voltage setting selected from the possible 8 options selectable + by the dvs gpios. The value of this property should be between 0 and 7. + If not specified or if out of range, the default value of this property + is set to 0. + + s5m8767,pmic-buck-dvs-gpios: + minItems: 3 + maxItems: 3 + description: | + GPIO specifiers for three host gpio's used for dvs. + + vinb1-supply: + description: Power supply for buck1 + vinb2-supply: + description: Power supply for buck2 + vinb3-supply: + description: Power supply for buck3 + vinb4-supply: + description: Power supply for buck4 + vinb5-supply: + description: Power supply for buck5 + vinb6-supply: + description: Power supply for buck6 + vinb7-supply: + description: Power supply for buck7 + vinb8-supply: + description: Power supply for buck8 + vinb9-supply: + description: Power supply for buck9 + + vinl1-supply: + description: Power supply for LDO3, LDO10, LDO26, LDO27 + vinl2-supply: + description: Power supply for LDO13, LDO16, LDO25, LDO28 + vinl3-supply: + description: Power supply for LDO11, LDO14 + vinl4-supply: + description: Power supply for LDO4, LDO9 + vinl5-supply: + description: Power supply for LDO12, LDO17, LDO19, LDO23 + vinl6-supply: + description: Power supply for LDO18, LDO20, LDO21, LDO24 + vinl7-supply: + description: Power supply for LDO5, LDO22 + vinl8-supply: + description: Power supply for LDO1, LDO6, LDO7, LDO8, LDO15 + vinl9-supply: + description: Power supply for LDO2 + + wakeup-source: true + +required: + - compatible + - reg + - regulators + - s5m8767,pmic-buck-ds-gpios + +dependencies: + s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage' ] + s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage' ] + s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage' ] + +additionalProperties: false + +allOf: + - if: + required: + - s5m8767,pmic-buck2-uses-gpio-dvs + then: + properties: + s5m8767,pmic-buck3-uses-gpio-dvs: false + s5m8767,pmic-buck4-uses-gpio-dvs: false + + - if: + required: + - s5m8767,pmic-buck3-uses-gpio-dvs + then: + properties: + s5m8767,pmic-buck2-uses-gpio-dvs: false + s5m8767,pmic-buck4-uses-gpio-dvs: false + + - if: + required: + - s5m8767,pmic-buck4-uses-gpio-dvs + then: + properties: + s5m8767,pmic-buck2-uses-gpio-dvs: false + s5m8767,pmic-buck3-uses-gpio-dvs: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-default-dvs-idx = <3>; + s5m8767,pmic-buck2-uses-gpio-dvs; + + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, + <&gpd1 1 GPIO_ACTIVE_LOW>, + <&gpd1 2 GPIO_ACTIVE_LOW>; + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, + <&gpx2 4 GPIO_ACTIVE_LOW>, + <&gpx2 5 GPIO_ACTIVE_LOW>; + + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt"; + }; + + regulators { + LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + + BUCK1 { + regulator-name = "VDD_MIF"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + BUCK2 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + }; + }; + }; + + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, + <&gpx2 4 GPIO_ACTIVE_LOW>, + <&gpx2 5 GPIO_ACTIVE_LOW>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt"; + }; + + regulators { + LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml new file mode 100644 index 000000000..ee0be32ac --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/silergy,sy7636a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: silergy sy7636a PMIC + +maintainers: + - Alistair Francis + +properties: + compatible: + const: silergy,sy7636a + + reg: + description: + I2C device address. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + '#thermal-sensor-cells': + const: 0 + + epd-pwr-good-gpios: + description: + Specifying the power good GPIOs. + maxItems: 1 + + regulators: + type: object + + properties: + compatible: + const: silergy,sy7636a-regulator + + vcom: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + description: + The regulator for the compenstation voltage. Enabling/disabling this + enables/disables the entire device. + properties: + regulator-name: + const: vcom + + additionalProperties: false + +required: + - compatible + - reg + - '#thermal-sensor-cells' + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@62 { + compatible = "silergy,sy7636a"; + reg = <0x62>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epdpmic>; + #thermal-sensor-cells = <0>; + + regulators { + reg_epdpmic: vcom { + regulator-name = "vcom"; + regulator-boot-on; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/sky81452.txt b/Documentation/devicetree/bindings/mfd/sky81452.txt new file mode 100644 index 000000000..511764acd --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/sky81452.txt @@ -0,0 +1,35 @@ +SKY81452 bindings + +Required properties: +- compatible : Must be "skyworks,sky81452" +- reg : I2C slave address + +Required child nodes: +- backlight : container node for backlight following the binding + in leds/backlight/sky81452-backlight.txt +- regulator : container node for regulators following the binding + in regulator/sky81452-regulator.txt + +Example: + + sky81452@2c { + compatible = "skyworks,sky81452"; + reg = <0x2c>; + + backlight { + compatible = "skyworks,sky81452-backlight"; + name = "pwm-backlight"; + led-sources = <0 1 2 3 6>; + skyworks,ignore-pwm; + skyworks,phase-shift; + skyworks,current-limit = <2300>; + }; + + regulator { + lout { + regulator-name = "sky81452-lout"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <8000000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt b/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt new file mode 100644 index 000000000..21b9a897f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt @@ -0,0 +1,40 @@ +Spreadtrum SC27xx Power Management Integrated Circuit (PMIC) + +The Spreadtrum SC27xx series PMICs contain SC2720, SC2721, SC2723, SC2730 +and SC2731. The Spreadtrum PMIC belonging to SC27xx series integrates all +mobile handset power management, audio codec, battery management and user +interface support function in a single chip. It has 6 major functional +blocks: +- DCDCs to support CPU, memory. +- LDOs to support both internal and external requirement. +- Battery management system, such as charger, fuel gauge. +- Audio codec. +- User interface function, such as indicator, flash LED and so on. +- IC level interface, such as power on/off control, RTC and typec and so on. + +Required properties: +- compatible: Should be one of the following: + "sprd,sc2720" + "sprd,sc2721" + "sprd,sc2723" + "sprd,sc2730" + "sprd,sc2731" +- reg: The address of the device chip select, should be 0. +- spi-max-frequency: Typically set to 26000000. +- interrupts: The interrupt line the device is connected to. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: The number of cells to describe an PMIC IRQ, must be 2. +- #address-cells: Child device offset number of cells, must be 1. +- #size-cells: Child device size number of cells, must be 0. + +Example: +pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml new file mode 100644 index 000000000..996bd4a17 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2022 Unisoc Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/sprd,ums512-glbreg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc System Global Register + +maintainers: + - Orson Zhai + - Baolin Wang + - Chunyan Zhang + +description: + Unisoc system global registers provide register map + for clocks and some multimedia modules of the SoC. + +properties: + compatible: + items: + - const: sprd,ums512-glbregs + - const: syscon + - const: simple-mfd + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^clock-controller@[0-9a-f]+$": + type: object + $ref: /schemas/clock/sprd,ums512-clk.yaml# + description: + Clock controller for the SoC clocks. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + ap_apb_regs: syscon@71000000 { + compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd"; + reg = <0x71000000 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x71000000 0x3000>; + + clock-controller@0 { + compatible = "sprd,ums512-apahb-gate"; + reg = <0x0 0x2000>; + #clock-cells = <1>; + }; + }; + + - | + ap_intc5_regs: syscon@32360000 { + compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd"; + reg = <0x32360000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml new file mode 100644 index 000000000..d950dd5d4 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stm32-lptimer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Low-Power Timers bindings + +description: | + The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several + functions + - PWM output (with programmable prescaler, configurable polarity) + - Trigger source for STM32 ADC/DAC (LPTIM_OUT) + - Several counter modes: + - quadrature encoder to detect angular position and direction of rotary + elements, from IN1 and IN2 input signals. + - simple counter from IN1 input signal. + +maintainers: + - Fabrice Gasnier + +properties: + compatible: + const: st,stm32-lptimer + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mux + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + wakeup-source: true + + pwm: + type: object + additionalProperties: false + + properties: + compatible: + const: st,stm32-pwm-lp + + "#pwm-cells": + const: 3 + + required: + - "#pwm-cells" + - compatible + + counter: + type: object + additionalProperties: false + + properties: + compatible: + const: st,stm32-lptimer-counter + + required: + - compatible + + timer: + type: object + additionalProperties: false + + properties: + compatible: + const: st,stm32-lptimer-timer + + required: + - compatible + +patternProperties: + "^trigger@[0-9]+$": + type: object + additionalProperties: false + + properties: + compatible: + const: st,stm32-lptimer-trigger + + reg: + description: Identify trigger hardware block. + items: + minimum: 0 + maximum: 2 + + required: + - compatible + - reg + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + #include + timer@40002400 { + compatible = "st,stm32-lptimer"; + reg = <0x40002400 0x400>; + clocks = <&timer_clk>; + clock-names = "mux"; + interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + }; + + trigger@0 { + compatible = "st,stm32-lptimer-trigger"; + reg = <0>; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + }; + + timer { + compatible = "st,stm32-lptimer-timer"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml new file mode 100644 index 000000000..e2c3c3b44 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stm32-timers.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Timers bindings + +description: | + This hardware block provides 3 types of timer along with PWM functionality: + - advanced-control timers consist of a 16-bit auto-reload counter driven + by a programmable prescaler, break input feature, PWM outputs and + complementary PWM outputs channels. + - general-purpose timers consist of a 16-bit or 32-bit auto-reload counter + driven by a programmable prescaler and PWM outputs. + - basic timers consist of a 16-bit auto-reload counter driven by a + programmable prescaler. + +maintainers: + - Fabrice Gasnier + +properties: + compatible: + const: st,stm32-timers + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: int + + resets: + maxItems: 1 + + dmas: + minItems: 1 + maxItems: 7 + + dma-names: + items: + enum: [ ch1, ch2, ch3, ch4, up, trig, com ] + minItems: 1 + maxItems: 7 + + interrupts: + oneOf: + - maxItems: 1 + - maxItems: 4 + + interrupt-names: + oneOf: + - items: + - const: global + - items: + - const: brk + - const: up + - const: trg-com + - const: cc + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + pwm: + type: object + additionalProperties: false + + properties: + compatible: + const: st,stm32-pwm + + "#pwm-cells": + const: 3 + + st,breakinput: + description: + One or two to describe break input + configurations. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "index" indicates on which break input (0 or 1) the + configuration should be applied. + enum: [0, 1] + - description: | + "level" gives the active level (0=low or 1=high) of the + input signal for this configuration + enum: [0, 1] + - description: | + "filter" gives the filtering value (up to 15) to be applied. + maximum: 15 + minItems: 1 + maxItems: 2 + + required: + - "#pwm-cells" + - compatible + + counter: + type: object + additionalProperties: false + + properties: + compatible: + const: st,stm32-timer-counter + + required: + - compatible + +patternProperties: + "^timer@[0-9]+$": + type: object + additionalProperties: false + + properties: + compatible: + enum: + - st,stm32-timer-trigger + - st,stm32h7-timer-trigger + + reg: + description: Identify trigger hardware block. + items: + minimum: 0 + maximum: 16 + + required: + - compatible + - reg + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + timers2: timer@40000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000000 0x400>; + clocks = <&rcc TIM2_K>; + clock-names = "int"; + dmas = <&dmamux1 18 0x400 0x1>, + <&dmamux1 19 0x400 0x1>, + <&dmamux1 20 0x400 0x1>, + <&dmamux1 21 0x400 0x1>, + <&dmamux1 22 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up"; + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + st,breakinput = <0 1 5>; + }; + timer@1 { + compatible = "st,stm32-timer-trigger"; + reg = <1>; + }; + counter { + compatible = "st,stm32-timer-counter"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml new file mode 100644 index 000000000..b4d543025 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stmfx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Multi-Function eXpander (STMFX) bindings + +description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for + communication with the main MCU. Its main features are GPIO expansion, + main MCU IDD measurement (IDD is the amount of current that flows + through VDD) and resistive touchscreen controller. + +maintainers: + - Amelie Delaunay + +properties: + compatible: + const: st,stmfx-0300 + + reg: + enum: [ 0x42, 0x43 ] + + interrupts: + maxItems: 1 + + drive-open-drain: true + + vdd-supply: true + + pinctrl: + type: object + + properties: + compatible: + const: st,stmfx-0300-pinctrl + + "#gpio-cells": + const: 2 + + "#interrupt-cells": + const: 2 + + gpio-controller: true + + interrupt-controller: true + + gpio-ranges: + description: if all STMFX pins[24:0] are available (no other STMFX function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 24>; + if agpio[3:0] are not available (STMFX Touchscreen function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>; + if agpio[7:4] are not available (STMFX IDD function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 20>; + maxItems: 1 + + patternProperties: + "^[a-zA-Z]*-pins$": + type: object + additionalProperties: false + + allOf: + - $ref: ../pinctrl/pinmux-node.yaml + + properties: + pins: true + bias-disable: true + bias-pull-up: true + bias-pull-pin-default: true + bias-pull-down: true + drive-open-drain: true + drive-push-pull: true + output-high: true + output-low: true + + additionalProperties: false + + required: + - compatible + - "#gpio-cells" + - "#interrupt-cells" + - gpio-controller + - interrupt-controller + - gpio-ranges + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + vdd-supply = <&v3v3>; + + stmfx_pinctrl: pinctrl { + compatible = "st,stmfx-0300-pinctrl"; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + gpio-ranges = <&stmfx_pinctrl 0 0 24>; + + joystick_pins: joystick-pins { + pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; + drive-push-pull; + bias-pull-up; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml new file mode 100644 index 000000000..426658ad8 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -0,0 +1,334 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stpmic1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics STPMIC1 Power Management IC bindings + +description: STMicroelectronics STPMIC1 Power Management IC + +maintainers: + - pascal Paillet + +properties: + compatible: + const: st,stpmic1 + + reg: + const: 0x33 + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + + onkey: + type: object + + $ref: ../input/input.yaml + + properties: + compatible: + const: st,stpmic1-onkey + + interrupts: + items: + - description: onkey-falling, happens when onkey is pressed. IT_PONKEY_F of pmic + - description: onkey-rising, happens when onkey is released. IT_PONKEY_R of pmic + + interrupt-names: + items: + - const: onkey-falling + - const: onkey-rising + + st,onkey-clear-cc-flag: + description: onkey is able power on after an over-current shutdown event. + $ref: /schemas/types.yaml#/definitions/flag + + st,onkey-pu-inactive: + description: onkey pull up is not active + $ref: /schemas/types.yaml#/definitions/flag + + power-off-time-sec: + minimum: 1 + maximum: 16 + + required: + - compatible + - interrupts + - interrupt-names + + additionalProperties: false + + watchdog: + type: object + + $ref: ../watchdog/watchdog.yaml + + properties: + compatible: + const: st,stpmic1-wdt + + timeout-sec: true + + required: + - compatible + + additionalProperties: false + + regulators: + type: object + + description: | + Available Regulators in STPMIC1 device are: + - buck1 for Buck BUCK1 + - buck2 for Buck BUCK2 + - buck3 for Buck BUCK3 + - buck4 for Buck BUCK4 + - ldo1 for LDO LDO1 + - ldo2 for LDO LDO2 + - ldo3 for LDO LDO3 + - ldo4 for LDO LDO4 + - ldo5 for LDO LDO5 + - ldo6 for LDO LDO6 + - vref_ddr for LDO Vref DDR + - boost for Buck BOOST + - pwr_sw1 for VBUS_OTG switch + - pwr_sw2 for SW_OUT switch + Switches are fixed voltage regulators with only enable/disable capability. + + properties: + compatible: + const: st,stpmic1-regulators + + ldo3: + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-allow-bypass: true + regulator-over-current-protection: true + + additionalProperties: false + + ldo4: + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-over-current-protection: true + + additionalProperties: false + + vref_ddr: + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + + additionalProperties: false + + boost: + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-over-current-protection: true + + additionalProperties: false + + patternProperties: + "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$": + description: STPMIC1 voltage regulators supplies + + "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": + $ref: ../regulator/regulator.yaml + + "^ldo[1-2,5-6]$": + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-over-current-protection: true + regulator-enable-ramp-delay: true + + additionalProperties: false + + "^buck[1-4]$": + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-initial-mode: true + regulator-pull-down: true + regulator-over-current-protection: true + regulator-enable-ramp-delay: true + + additionalProperties: false + + "^pwr_sw[1-2]$": + type: object + + properties: + interrupts: + maxItems: 1 + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-over-current-protection: true + regulator-active-discharge: true + + additionalProperties: false + + required: + - compatible + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - "#interrupt-cells" + - interrupt-controller + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupt-parent = <&gpioa>; + interrupts = <0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = ,; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + }; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo6-supply = <&v3v3>; + + buck1 { + regulator-name = "vdd_core"; + interrupts = ; + st,mask-reset; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1200000>; + }; + + buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-pull-down; + }; + + buck4 { + regulator-name = "v3v3"; + interrupts = ; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-over-current-protection; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml new file mode 100644 index 000000000..6c8d42f27 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml @@ -0,0 +1,522 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/stericsson,ab8500.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST-Ericsson Analog Baseband AB8500 and AB8505 + +maintainers: + - Linus Walleij + +description: + the AB8500 "Analog Baseband" is the mixed-signals integrated circuit + handling power management (regulators), analog-to-digital conversion + (ADC), battery charging, fuel gauging of the battery, battery-backed + RTC, PWM, USB PHY and some GPIO lines in the ST-Ericsson U8500 platforms + in connection with the DB8500 digital baseband. The DB8500 PRCMU + communicates directly and autonomously with the AB8500 and thus it + appears as a subnode of the DB8500 PRCMU. An altered version called + AB8505 also exist, the difference in AB8505 is that some of the USB and + USB charging handling has changed, and it has an embedded USB-to-serial + converter. Most subblocks takes their interrupts directly from the + AB8500 embedded interrupt controller. + +properties: + $nodename: + pattern: '^ab850[05]$' + + compatible: + enum: + - stericsson,ab8500 + - stericsson,ab8505 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + # Some subnodes use a reg, some don't. Those that do use a single cell. + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + clock-controller: + description: Node describing the AB8500 clock controller. This + provides the reference clock for the entire U8500 system and + the DB8500 counterpart. + type: object + additionalProperties: false + + properties: + compatible: + const: stericsson,ab8500-clk + + '#clock-cells': + const: 1 + + gpio: + description: Node describing the AB8500 GPIO controller. A few + GPIO pins available for misc usage. + type: object + additionalProperties: false + + properties: + compatible: + enum: + - stericsson,ab8500-gpio + - stericsson,ab8505-gpio + + gpio-controller: true + + '#gpio-cells': + const: 2 + + rtc: + description: Node describing the AB8500 battery-backed RTC. + type: object + additionalProperties: false + + properties: + compatible: + const: stericsson,ab8500-rtc + + interrupts: + items: + - description: 60 second interval alarm interrupt + - description: RTC alarm + + interrupt-names: + items: + - const: 60S + - const: ALARM + + adc: + description: Node describing the AB8500 general purpose analog to digital + converter, GPADC. + type: object + + properties: + compatible: + const: stericsson,ab8500-gpadc + + # AB8505 only supports one (software) EOC interrupt + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: true + + vddadc-supply: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#io-channel-cells': + const: 1 + + patternProperties: + "^channel@[0-9a-f]+$": + type: object + $ref: ../iio/adc/adc.yaml# + description: Represents each of the external channels which are + connected to the ADC. + + properties: + reg: + items: + minimum: 1 + maximum: 31 + + required: + - reg + + additionalProperties: false + + required: + - compatible + - interrupts + - interrupt-names + - vddadc-supply + - '#address-cells' + - '#size-cells' + - '#io-channel-cells' + + additionalProperties: false + + thermal: + description: Node describing the AB8500 thermal control block. All this block + really does is to fire an interrupt when the die becomes 130 degrees Celsius + in temperature. + type: object + + properties: + compatible: + const: stericsson,abx500-temp + + interrupts: + items: + - description: Thermal warm warning interrupt + + interrupt-names: + items: + - const: ABX500_TEMP_WARM + + required: + - compatible + - interrupts + - interrupt-names + + additionalProperties: false + + ab8500_fg: + description: Node describing the AB8500 fuel gauge control block. + type: object + $ref: ../power/supply/stericsson,ab8500-fg.yaml + + ab8500_btemp: + description: Node describing the AB8500 battery temperature control block. + type: object + $ref: ../power/supply/stericsson,ab8500-btemp.yaml + + ab8500_charger: + description: Node describing the AB8500 battery charger control block. + type: object + $ref: ../power/supply/stericsson,ab8500-charger.yaml + + ab8500_chargalg: + description: Node describing the AB8500 battery charger algorithm. + type: object + $ref: ../power/supply/stericsson,ab8500-chargalg.yaml + + phy: + description: Node describing the AB8500 USB PHY control block. + type: object + + properties: + compatible: + const: stericsson,ab8500-usb + + interrupts: + items: + - description: ID wakeup rising IRQ + - description: ID wakeup falling IRQ + - description: VBUS detection falling IRQ + - description: VBUS detection rising IRQ + - description: USB link status change IRQ + - description: ADP probe plug IRQ + - description: ADP probe unplug IRQ + + interrupt-names: + items: + - const: ID_WAKEUP_R + - const: ID_WAKEUP_F + - const: VBUS_DET_F + - const: VBUS_DET_R + - const: USB_LINK_STATUS + - const: USB_ADP_PROBE_PLUG + - const: USB_ADP_PROBE_UNPLUG + + vddulpivio18-supply: true + v-ape-supply: true + musb_1v8-supply: true + + clocks: + items: + - description: PRCMY system clock + + clock-names: + items: + - const: sysclk + + '#phy-cells': + const: 0 + + required: + - compatible + - interrupts + - interrupt-names + - vddulpivio18-supply + - v-ape-supply + - musb_1v8-supply + - clocks + - clock-names + - '#phy-cells' + + additionalProperties: false + + key: + description: Node describing the AB8500 power-on key control block. + type: object + + properties: + compatible: + const: stericsson,ab8500-poweron-key + + interrupts: + items: + - description: ON key falling IRQ + - description: ON key rising IRQ + + interrupt-names: + items: + - const: ONKEY_DBF + - const: ONKEY_DBR + + required: + - compatible + - interrupts + - interrupt-names + + additionalProperties: false + + ab8500-sysctrl: + description: Node describing the AB8500 system control block. + type: object + + properties: + compatible: + const: stericsson,ab8500-sysctrl + + required: + - compatible + + additionalProperties: false + + codec: + description: Node describing the AB8500 audio codec block. + type: object + + properties: + compatible: + const: stericsson,ab8500-codec + + V-AUD-supply: true + V-AMIC1-supply: true + V-AMIC2-supply: true + V-DMIC-supply: true + + clocks: + items: + - description: Audio system clock + + clock-names: + items: + - const: audioclk + + stericsson,earpeice-cmv: + description: Earpeice voltage + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 950, 1100, 1270, 1580 ] + + required: + - compatible + + additionalProperties: false + + regulator: + description: Node describing the AB8500 internal regulators. + type: object + + properties: + compatible: + enum: + - stericsson,ab8500-regulator + - stericsson,ab8505-regulator + + vin-supply: + description: The regulator supplying all of the internal regulators + with power. + + ab8500_ldo_aux1: + description: The voltage for the auxilary LDO regulator 1 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_aux2: + description: The voltage for the auxilary LDO regulator 2 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_aux3: + description: The voltage for the auxilary LDO regulator 3 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_aux4: + description: The voltage for the auxilary LDO regulator 4 + only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_aux5: + description: The voltage for the auxilary LDO regulator 5 + only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_aux6: + description: The voltage for the auxilary LDO regulator 6 + only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + # There is never any AUX7 regulator which is confusing + + ab8500_ldo_aux8: + description: The voltage for the auxilary LDO regulator 8 + only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_intcore: + description: The LDO regulator for the internal core voltage + of the AB8500 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_adc: + description: Analog power regulator for the analog to digital converter + ADC, only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_tvout: + description: The voltage for the TV output regulator, incidentally + this voltage is also used for other purposes such as measuring + the temperature of the NTC thermistor on the battery. + Only present on AB8500. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_audio: + description: The LDO regulator for the audio codec output + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_anamic1: + description: The LDO regulator for the analog microphone 1 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_anamic2: + description: The LDO regulator for the analog microphone 2 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_dmic: + description: The LDO regulator for the digital microphone + only present on AB8500 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_ana: + description: Analog power regulator for CSI and DSI interfaces, + Camera Serial Interface CSI and Display Serial Interface DSI. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + required: + - compatible + + additionalProperties: false + + + regulator-external: + description: Node describing the AB8500 external regulators. This + concerns the autonomous regulators VSMPS1, VSMPS2 and VSMPS3 + that are normally controlled by external electronics but also + sometimes need to be explicitly controlled by software. + type: object + + properties: + compatible: + const: stericsson,ab8500-ext-regulator + + ab8500_ext1: + description: The voltage for the VSMPS1 external regulator + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ext2: + description: The voltage for the VSMPS2 external regulator + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ext3: + description: The voltage for the VSMPS3 external regulator + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + required: + - compatible + + additionalProperties: false + +patternProperties: + "^pwm@[1-9]+?$": + type: object + $ref: ../pwm/pwm.yaml# + unevaluatedProperties: false + description: Represents each of the PWM blocks in the AB8500 + + properties: + compatible: + const: stericsson,ab8500-pwm + + reg: true + + clocks: + items: + - description: internal clock + + clock-names: + items: + - const: intclk + + required: + - compatible + - reg + +required: + - compatible + - clock-controller + - gpio + - rtc + - adc + - thermal + - ab8500_fg + - ab8500_btemp + - ab8500_charger + - ab8500_chargalg + - phy + - key + - regulator + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml new file mode 100644 index 000000000..1d4d88f7e --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml @@ -0,0 +1,279 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/stericsson,db8500-prcmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST-Ericsson DB8500 PRCMU - Power Reset and Control Management Unit + +maintainers: + - Linus Walleij + +description: + The DB8500 Power Reset and Control Management Unit is an XP70 8-bit + microprocessor that is embedded in the always-on power domain of the + DB8500 SoCs to manage the low power states, powering up and down parts + of the silicon, and controlling reset of different IP blocks. + +properties: + $nodename: + pattern: '^prcmu@[0-9a-f]+$' + + compatible: + description: The device is compatible both to the device-specific + compatible "stericsson,db8500-prcmu" and "syscon". The latter + compatible is needed for the device to be exposed as a system + controller so that arbitrary registers can be access by + different operating system components. + items: + - const: stericsson,db8500-prcmu + - const: syscon + + reg: + items: + - description: Main PRCMU register area + - description: PRCMU TCPM register area + - description: PRCMU TCDM register area + + reg-names: + items: + - const: prcmu + - const: prcmu-tcpm + - const: prcmu-tcdm + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + db8500-prcmu-regulators: + description: Node describing the DB8500 regulators. These are mainly + power rails inside the silicon but some of those are also routed + out to external pins. + type: object + + properties: + compatible: + const: stericsson,db8500-prcmu-regulator + + db8500_vape: + description: The voltage for the application processor, the + main voltage domain for the chip. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_varm: + description: The voltage for the ARM Cortex A-9 CPU. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_vmodem: + description: The voltage for the modem subsystem. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_vpll: + description: The voltage for the phase locked loop clocks. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_vsmps1: + description: Also known as VIO12, is a step-down voltage regulator + for 1.2V I/O. SMPS means System Management Power Source. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_vsmps2: + description: Also known as VIO18, is a step-down voltage regulator + for 1.8V I/O. SMPS means System Management Power Source. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_vsmps3: + description: This is a step-down voltage regulator + for 0.87 thru 1.875V I/O. SMPS means System Management Power Source. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_vrf1: + description: RF transciever voltage regulator. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_sva_mmdsp: + description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) + voltage regulator. This is the voltage for the accelerator DSP + for video encoding and decoding. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_sva_mmdsp_ret: + description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) + voltage regulator for retention mode. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_sva_pipe: + description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) + voltage regulator for the data pipe. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_sia_mmdsp: + description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) + voltage regulator. This is the voltage for the accelerator DSP + for image encoding and decoding. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_sia_mmdsp_ret: + description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) + voltage regulator for retention mode. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_sia_pipe: + description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) + voltage regulator for the data pipe. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_sga: + description: Smart Graphics Accelerator (SGA) voltage regulator. + This is in effect controlling the power to the MALI400 3D + accelerator block. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_b2r2_mcde: + description: Blit Blend Rotate and Rescale (B2R2), and Multi-Channel + Display Engine (MCDE) voltage regulator. These are two graphics + blocks. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_esram12: + description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_esram12_ret: + description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator for + retention mode. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_esram34: + description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator. + type: object + $ref: ../regulator/regulator.yaml# + + db8500_esram34_ret: + description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator for + retention mode. + type: object + $ref: ../regulator/regulator.yaml# + + required: + - compatible + - db8500_vape + - db8500_varm + - db8500_vmodem + - db8500_vpll + - db8500_vsmps1 + - db8500_vsmps2 + - db8500_vsmps3 + - db8500_vrf1 + - db8500_sva_mmdsp + - db8500_sva_mmdsp_ret + - db8500_sva_pipe + - db8500_sia_mmdsp + - db8500_sia_mmdsp_ret + - db8500_sia_pipe + - db8500_sga + - db8500_b2r2_mcde + - db8500_esram12 + - db8500_esram12_ret + - db8500_esram34 + - db8500_esram34_ret + + additionalProperties: false + +patternProperties: + "^thermal@[0-9a-f]+$": + description: Node describing the DB8500 thermal control functions. + This binds to an operating system driver that monitors the + temperature of the SoC. + type: object + + properties: + compatible: + const: stericsson,db8500-thermal + + reg: + maxItems: 1 + + interrupts: + items: + - description: Hotmon low interrupt (falling temperature) + - description: Hotmon high interrupt (rising temperature) + + interrupt-names: + items: + - const: IRQ_HOTMON_LOW + - const: IRQ_HOTMON_HIGH + + '#thermal-sensor-cells': + const: 0 + + additionalProperties: false + + "^prcmu-timer-4@[0-9a-f]+$": + description: Node describing the externally visible timer 4 in the + PRCMU block. This timer is interesting to the operating system + since even thought it has a very low resolution (32768 Hz) it is + always on, and thus provides a consistent monotonic timeline for + the system. + type: object + + properties: + compatible: + const: stericsson,db8500-prcmu-timer-4 + + reg: + maxItems: 1 + + additionalProperties: false + + "^ab850[05]$": + description: Node describing the Analog Baseband 8500 mixed-signals + ASIC AB8500 and subcomponents. The AB8500 is accessed through the + PRCMU and hence it appears here. This component has a separate + set of devicetree bindings. The AB8505 is a newer version of the + same ASIC. + type: object + $ref: stericsson,ab8500.yaml# + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + - ranges + - interrupts + - interrupt-controller + - '#interrupt-cells' + - db8500-prcmu-regulators + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt new file mode 100644 index 000000000..d4408a417 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stmpe.txt @@ -0,0 +1,42 @@ +* ST Microelectronics STMPE Multi-Functional Device + +STMPE is an MFD device which may expose the following inbuilt devices: gpio, +keypad, touchscreen, adc, pwm, rotator. + +Required properties: + - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" + - reg : I2C/SPI address of the device + +Optional properties: + - interrupts : The interrupt outputs from the controller + - interrupt-controller : Marks the device node as an interrupt controller + - wakeup-source : Marks the input device as wakable + - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 + - irq-gpio : If present, which GPIO to use for event IRQ + +Optional properties for devices with touch and ADC (STMPE811|STMPE610): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks 4 -> 80 clocks (recommended) + 1 -> 44 clocks 5 -> 96 clocks + 2 -> 56 clocks 6 -> 124 clocks + 3 -> 64 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz + 1 -> 3.25 MHz + +Example: + + stmpe1601: stmpe1601@40 { + compatible = "st,stmpe1601"; + reg = <0x40>; + interrupts = <26 0x4>; + interrupt-parent = <&gpio6>; + interrupt-controller; + + wakeup-source; + st,autosleep-timeout = <1024>; + }; diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml new file mode 100644 index 000000000..4e4baf537 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: System Controller Registers R/W + +description: | + System controller node represents a register region containing a set + of miscellaneous registers. The registers are not cohesive enough to + represent as any specific type of device. The typical use-case is + for some other node's driver, or platform-specific code, to acquire + a reference to the syscon node (e.g. by phandle, node path, or + search using a specific compatible value), interrogate the node (or + associated OS driver) to determine the location of the registers, + and access the registers directly. + +maintainers: + - Lee Jones + +select: + properties: + compatible: + contains: + enum: + - syscon + + required: + - compatible + +properties: + compatible: + anyOf: + - items: + - enum: + - allwinner,sun8i-a83t-system-controller + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller + - brcm,cru-clkset + - freecom,fsg-cs2-system-controller + - fsl,imx93-aonmix-ns-syscfg + - fsl,imx93-wakeupmix-syscfg + - hisilicon,dsa-subctrl + - hisilicon,hi6220-sramctrl + - hisilicon,pcie-sas-subctrl + - hisilicon,peri-subctrl + - intel,lgm-syscon + - marvell,armada-3700-usb2-host-misc + - mediatek,mt8135-pctl-a-syscfg + - mediatek,mt8135-pctl-b-syscfg + - microchip,lan966x-cpu-syscon + - microchip,sparx5-cpu-syscon + - mstar,msc313-pmsleep + - rockchip,px30-qos + - rockchip,rk3036-qos + - rockchip,rk3066-qos + - rockchip,rk3228-qos + - rockchip,rk3288-qos + - rockchip,rk3368-qos + - rockchip,rk3399-qos + - rockchip,rk3568-qos + - rockchip,rk3588-qos + - rockchip,rv1126-qos + - samsung,exynos3-sysreg + - samsung,exynos4-sysreg + - samsung,exynos5-sysreg + - samsung,exynos5433-sysreg + - samsung,exynos850-sysreg + - samsung,exynosautov9-sysreg + + - const: syscon + + - contains: + const: syscon + minItems: 2 + maxItems: 5 # Should be enough + + reg: + maxItems: 1 + + reg-io-width: + description: | + The size (in bytes) of the IO accesses that should be performed + on the device. + enum: [1, 2, 4, 8] + + hwlocks: + maxItems: 1 + description: + Reference to a phandle of a hardware spinlock provider node. + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: simple-mfd + then: + properties: + compatible: + minItems: 3 + maxItems: 5 + +additionalProperties: true + +examples: + - | + syscon: syscon@1c00000 { + compatible = "allwinner,sun8i-h3-system-controller", "syscon"; + reg = <0x01c00000 0x1000>; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt new file mode 100644 index 000000000..4f22b2b07 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt @@ -0,0 +1,107 @@ +* Toshiba TC3589x multi-purpose expander + +The Toshiba TC3589x series are I2C-based MFD devices which may expose the +following built-in devices: gpio, keypad, rotator (vibrator), PWM (for +e.g. LEDs or vibrators) The included models are: + +- TC35890 +- TC35892 +- TC35893 +- TC35894 +- TC35895 +- TC35896 + +Required properties: + - compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893", + "toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896" + - reg : I2C address of the device + - interrupts : the interrupt on the parent the controller is connected to + - interrupt-controller : marks the device node as an interrupt controller + - #interrupt-cells : should be <1>, the first cell is the IRQ offset on this + TC3589x interrupt controller. + +Optional nodes: + +- GPIO + This GPIO module inside the TC3589x has 24 (TC35890, TC35892) or 20 + (other models) GPIO lines. + - compatible : must be "toshiba,tc3589x-gpio" + - interrupts : interrupt on the parent, which must be the tc3589x MFD device + - interrupt-controller : marks the device node as an interrupt controller + - #interrupt-cells : should be <2>, the first cell is the IRQ offset on this + TC3589x GPIO interrupt controller, the second cell is the interrupt flags + in accordance with . The following + flags are valid: + - IRQ_TYPE_LEVEL_LOW + - IRQ_TYPE_LEVEL_HIGH + - IRQ_TYPE_EDGE_RISING + - IRQ_TYPE_EDGE_FALLING + - IRQ_TYPE_EDGE_BOTH + - gpio-controller : marks the device node as a GPIO controller + - #gpio-cells : should be <2>, the first cell is the GPIO offset on this + GPIO controller, the second cell is the flags. + +- Keypad + This keypad is the same on all variants, supporting up to 96 different + keys. The linux-specific properties are modeled on those already existing + in other input drivers. + - compatible : must be "toshiba,tc3589x-keypad" + - debounce-delay-ms : debounce interval in milliseconds + - keypad,num-rows : number of rows in the matrix, see + bindings/input/matrix-keymap.txt + - keypad,num-columns : number of columns in the matrix, see + bindings/input/matrix-keymap.txt + - linux,keymap: the definition can be found in + bindings/input/matrix-keymap.txt + - linux,no-autorepeat: do no enable autorepeat feature. + - wakeup-source: use any event on keypad as wakeup event. + (Legacy property supported: "linux,wakeup") + +Example: + +tc35893@44 { + compatible = "toshiba,tc35893"; + reg = <0x44>; + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <1>; + + tc3589x_gpio { + compatible = "toshiba,tc3589x-gpio"; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + tc3589x_keypad { + compatible = "toshiba,tc3589x-keypad"; + interrupts = <6>; + debounce-delay-ms = <4>; + keypad,num-columns = <8>; + keypad,num-rows = <8>; + linux,no-autorepeat; + linux,keymap = <0x0301006b + 0x04010066 + 0x06040072 + 0x040200d7 + 0x0303006a + 0x0205000e + 0x0607008b + 0x0500001c + 0x0403000b + 0x03040034 + 0x05020067 + 0x0305006c + 0x040500e7 + 0x0005009e + 0x06020073 + 0x01030039 + 0x07060069 + 0x050500d9>; + wakeup-source; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml new file mode 100644 index 000000000..34bf6a014 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,am3359-tscadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI AM3359 Touchscreen controller/ADC + +maintainers: + - Miquel Raynal + +properties: + compatible: + oneOf: + - const: ti,am3359-tscadc + - items: + - const: ti,am654-tscadc + - const: ti,am3359-tscadc + - const: ti,am4372-magadc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: fck + + dmas: + items: + - description: DMA controller phandle and request line for FIFO0 + - description: DMA controller phandle and request line for FIFO1 + + dma-names: + items: + - const: fifo0 + - const: fifo1 + + adc: + type: object + description: ADC child + + tsc: + type: object + description: Touchscreen controller child + + mag: + type: object + description: Magnetic reader + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include + + tscadc@0 { + compatible = "ti,am3359-tscadc"; + reg = <0x0 0x1000>; + interrupts = ; + clocks = <&adc_tsc_fck>; + clock-names = "fck"; + dmas = <&edma 53 0>, <&edma 57 0>; + dma-names = "fifo0", "fifo1"; + + tsc { + }; + + adc { + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml new file mode 100644 index 000000000..873ee0c09 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,j721e-system-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI J721e System Controller Registers R/W + +description: | + This represents the Control Module registers (CTRL_MMR0) on the SoC. + System controller node represents a register region containing a set + of miscellaneous registers. The registers are not cohesive enough to + represent as any specific type of device. The typical use-case is + for some other node's driver, or platform-specific code, to acquire + a reference to the syscon node (e.g. by phandle, node path, or + search using a specific compatible value), interrogate the node (or + associated OS driver) to determine the location of the registers, + and access the registers directly. + +maintainers: + - Kishon Vijay Abraham I + - Roger Quadros + +properties: + compatible: + items: + - enum: + - ti,j721e-system-controller + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + # Optional children + "^mux-controller@[0-9a-f]+$": + type: object + description: + This is the SERDES lane control mux. + + "^clock-controller@[0-9a-f]+$": + type: object + $ref: /schemas/clock/ti,am654-ehrpwm-tbclk.yaml# + description: + Clock provider for TI EHRPWM nodes. + + "phy@[0-9a-f]+$": + type: object + $ref: /schemas/phy/ti,phy-gmii-sel.yaml# + description: + The phy node corresponding to the ethernet MAC. + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + scm_conf: scm-conf@100000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00100000 0x1c000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + serdes_ln_ctrl: mux-controller@4080 { + compatible = "mmio-mux"; + reg = <0x00004080 0x50>; + + #mux-control-cells = <1>; + mux-reg-masks = + <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */ + <0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */ + <0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */ + <0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */ + <0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>; + /* SERDES4 lane0/1/2/3 select */ + }; + + clock-controller@4140 { + compatible = "ti,am654-ehrpwm-tbclk", "syscon"; + reg = <0x4140 0x18>; + #clock-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml new file mode 100644 index 000000000..f6cac4b10 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,lp87524-q1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI LP87524-Q1 four 1-phase output buck converter + +maintainers: + - Keerthy + +properties: + compatible: + const: ti,lp87524-q1 + + reg: + description: I2C slave address + const: 0x60 + + reset-gpios: + description: GPIO connected to NRST pin (active low reset, pin 20) + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the pin number. + The second cell is is used to specify flags. + See ../gpio/gpio.txt for more information. + const: 2 + + regulators: + type: object + + patternProperties: + "^buck[0123]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + + required: + - buck0 + - buck1 + - buck2 + - buck3 + + additionalProperties: false + +patternProperties: + "^buck[0123]-in-supply$": + description: Voltage regulator supply for each BUCK converter + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - buck0-in-supply + - buck1-in-supply + - buck2-in-supply + - buck3-in-supply + - regulators + +additionalProperties: false + +examples: + - | + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@60 { + compatible = "ti,lp87524-q1"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + + buck0-in-supply = <&vdd_5v0>; + buck1-in-supply = <&vdd_5v0>; + buck2-in-supply = <&vdd_5v0>; + buck3-in-supply = <&vdd_5v0>; + + regulators { + buck0_reg: buck0 { + regulator-name = "buck0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + buck1_reg: buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml new file mode 100644 index 000000000..dc5a29b5e --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,lp87561-q1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI LP87561-Q1 single 4-phase output buck converter + +maintainers: + - Keerthy + +properties: + compatible: + const: ti,lp87561-q1 + + reg: + description: I2C slave address + const: 0x60 + + reset-gpios: + description: GPIO connected to NRST pin (active low reset, pin 20) + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the pin number. + The second cell is is used to specify flags. + See ../gpio/gpio.txt for more information. + const: 2 + + buck3210-in-supply: + description: + Voltage regulator supply for all the four BUCK converters. + + regulators: + type: object + + properties: + buck3210: + type: object + $ref: /schemas/regulator/regulator.yaml# + + required: + - buck3210 + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - buck3210-in-supply + +additionalProperties: false + +examples: + - | + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@60 { + compatible = "ti,lp87561-q1"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + + buck3210-in-supply = <&vsys_3v3>; + + regulators { + buck3210_reg: buck3210 { + /* VDD_CORE */ + regulator-name = "buck3210"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml new file mode 100644 index 000000000..012d25111 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,lp87565-q1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI LP87565-Q1 / LP87565 dual 2-phase output buck converter + +maintainers: + - Keerthy + +properties: + compatible: + enum: + - ti,lp87565 + - ti,lp87565-q1 + + reg: + description: I2C slave address + const: 0x60 + + reset-gpios: + description: GPIO connected to NRST pin (active low reset, pin 20) + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the pin number. + The second cell is is used to specify flags. + See ../gpio/gpio.txt for more information. + const: 2 + + buck10-in-supply: + description: + Voltage regulator supply for BUCK0 and BUCK1 converters. + + buck23-in-supply: + description: + Voltage regulator supply for BUCK2 and BUCK3 converters. + + regulators: + type: object + + patternProperties: + "^buck(10|23)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + + required: + - buck10 + - buck23 + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - buck10-in-supply + - buck23-in-supply + +additionalProperties: false + +examples: + - | + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@60 { + compatible = "ti,lp87565-q1"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + + buck10-in-supply = <&vsys_3v3>; + buck23-in-supply = <&vsys_3v3>; + + regulators { + buck10_reg: buck10 { + /* VDD_MPU */ + regulator-name = "buck10"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + buck23_reg: buck23 { + /* VDD_GPU */ + regulator-name = "buck23"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml new file mode 100644 index 000000000..3fdd9cb5b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,tps65086.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TPS65086 Power Management Integrated Circuit (PMIC) + +maintainers: + - Emil Renner Berthing + +properties: + compatible: + const: ti,tps65086 + + reg: + const: 0x5e + description: I2C slave address + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + description: | + The first cell is the IRQ number. The second cell is the flags, + encoded as trigger masks from ../interrupt-controller/interrupts.txt. + + gpio-controller: true + + '#gpio-cells': + const: 2 + description: | + The first cell is the pin number and the second cell is used to specify + flags. See ../gpio/gpio.txt for more information. + + regulators: + type: object + additionalProperties: false + description: | + List of child nodes that specify the regulator initialization data. + Child nodes must be named after their hardware counterparts: + buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt. + Each child node is defined using the standard binding for regulators and + the optional regulator properties defined below. + + patternProperties: + "^buck[1-6]$": + type: object + $ref: ../regulator/regulator.yaml + + properties: + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + ti,regulator-step-size-25mv: + type: boolean + description: | + Set this if the regulator is factory set with a 25mv step voltage + mapping. + ti,regulator-decay: + type: boolean + description: | + Set this if the output needs to decay, default is for the output + to slew down. + + additionalProperties: false + + "^(ldoa[1-3]|swa1|swb[1-2]|vtt)$": + type: object + $ref: ../regulator/regulator.yaml + + properties: + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - regulators + +examples: + - | + #include + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pmic: pmic@5e { + compatible = "ti,tps65086"; + reg = <0x5e>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + regulators { + buck1 { + regulator-name = "vcc1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1600000>; + regulator-boot-on; + ti,regulator-decay; + ti,regulator-step-size-25mv; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt new file mode 100644 index 000000000..71a1f5963 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt @@ -0,0 +1,19 @@ +* Device tree bindings for Texas Instruments keystone device state control + +The Keystone II devices have a set of registers that are used to control +the status of its peripherals. This node is intended to allow access to +this functionality. + +Required properties: + +- compatible: "ti,keystone-devctrl", "syscon" + +- reg: contains offset/length value for device state control + registers space. + +Example: + +devctrl: device-state-control@02620000 { + compatible = "ti,keystone-devctrl", "syscon"; + reg = <0x02620000 0x1000>; +}; diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt new file mode 100644 index 000000000..2296b8f24 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt @@ -0,0 +1,269 @@ +TI LMU (Lighting Management Unit) device tree bindings + +TI LMU driver supports lighting devices below. + + Name Child nodes + ------ --------------------------------- + LM3631 Backlight and regulator + LM3632 Backlight and regulator + LM3633 Backlight, LED and fault monitor + LM3695 Backlight + LM36274 Backlight and regulator + +Required properties: + - compatible: Should be one of: + "ti,lm3631" + "ti,lm3632" + "ti,lm3633" + "ti,lm3695" + "ti,lm36274" + - reg: I2C slave address. + 0x11 for LM3632 + 0x29 for LM3631 + 0x36 for LM3633 + 0x63 for LM3695 + 0x11 for LM36274 + +Optional properties: + - enable-gpios: A GPIO specifier for hardware enable pin. + - ramp-up-us: Current ramping from one brightness level to + the a higher brightness level. + Range from 2048 us - 117.44 s + - ramp-down-us: Current ramping from one brightness level to + the a lower brightness level. + Range from 2048 us - 117.44 s + - ti,brightness-resolution - This determines whether to use 8 bit brightness + mode or 11 bit brightness mode. If this value is + not set the device is defaulted to the preferred + 8bit brightness mode per 7.3.4.1 of the data + sheet. This setting can either be in the parent + node or as part of the LED child nodes. This + is determined by the part itself if the strings + have a common brightness register or individual + brightness registers. + The values are 255 (8bit) or 2047 (11bit). + +Required node: + - backlight: All LMU devices have backlight child nodes. + For the properties, please refer to [1]. + +Optional nodes: + - fault-monitor: Hardware fault monitoring driver for LM3633 and LM3697. + Required properties: + - compatible: Should be one of: + "ti,lm3633-fault-monitor" + - leds: LED properties for LM3633. Please refer to [2]. + LED properties for LM36274. Please refer to [4]. + - regulators: Regulator properties for LM3631 and LM3632. + Please refer to [3]. + +[1] ../leds/backlight/ti-lmu-backlight.txt +[2] ../leds/leds-lm3633.txt +[3] ../regulator/lm363x-regulator.txt +[4] ../leds/leds-lm36274.txt + +lm3631@29 { + compatible = "ti,lm3631"; + reg = <0x29>; + + regulators { + compatible = "ti,lm363x-regulator"; + + vboost { + regulator-name = "lcd_boost"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <6350000>; + regulator-always-on; + }; + + vcont { + regulator-name = "lcd_vcont"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + voref { + regulator-name = "lcd_voref"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + }; + + vpos { + regulator-name = "lcd_vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + + vneg { + regulator-name = "lcd_vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + }; + + backlight { + compatible = "ti,lm3631-backlight"; + + lcd_bl { + led-sources = <0 1>; + ramp-up-us = <300000>; + }; + }; +}; + +lm3632@11 { + compatible = "ti,lm3632"; + reg = <0x11>; + + enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; /* PC2 */ + + regulators { + compatible = "ti,lm363x-regulator"; + + enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>, + <&pioC 1 GPIO_ACTIVE_HIGH>; + + vboost { + regulator-name = "lcd_boost"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <6400000>; + regulator-always-on; + }; + + vpos { + regulator-name = "lcd_vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + }; + + vneg { + regulator-name = "lcd_vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + }; + }; + + backlight { + compatible = "ti,lm3632-backlight"; + + pwms = <&pwm0 0 10000 0>; /* pwm number, period, polarity */ + pwm-names = "lmu-backlight"; + + lcd { + led-sources = <0 1>; + pwm-period = <10000>; + }; + }; +}; + +lm3633@36 { + compatible = "ti,lm3633"; + reg = <0x36>; + + enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; + + backlight { + compatible = "ti,lm3633-backlight"; + + main { + label = "main_lcd"; + led-sources = <1 2>; + ramp-up-us = <500000>; + ramp-down-us = <500000>; + }; + + front { + label = "front_lcd"; + led-sources = <0>; + ramp-up-us = <1000000>; + ramp-down-us = <0>; + }; + }; + + leds { + compatible = "ti,lm3633-leds"; + + chan1 { + label = "status"; + led-sources = <1>; + led-max-microamp = <6000>; + }; + + chan345 { + label = "rgb"; + led-sources = <3 4 5>; + led-max-microamp = <10000>; + }; + }; + + fault-monitor { + compatible = "ti,lm3633-fault-monitor"; + }; +}; + +lm3695@63 { + compatible = "ti,lm3695"; + reg = <0x63>; + + enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; + + backlight { + compatible = "ti,lm3695-backlight"; + + lcd { + label = "bl"; + led-sources = <0 1>; + }; + }; +}; + +lm36274@11 { + compatible = "ti,lm36274"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11>; + + enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; + regulators { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lm363x-regulator"; + + enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>, + <&pioC 1 GPIO_ACTIVE_HIGH>; + + vboost { + regulator-name = "lcd_boost"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <7150000>; + regulator-always-on; + }; + + vpos { + regulator-name = "lcd_vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + }; + + vneg { + regulator-name = "lcd_vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + }; + }; + + backlight { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lm36274-backlight"; + + led@0 { + reg = <0>; + led-sources = <0 2>; + label = "white:backlight_cluster"; + linux,default-trigger = "backlight"; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/tps6105x.txt b/Documentation/devicetree/bindings/mfd/tps6105x.txt new file mode 100644 index 000000000..dc448a9d5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/tps6105x.txt @@ -0,0 +1,62 @@ +* Device tree bindings for TI TPS61050/61052 Boost Converters + +The TP61050/TPS61052 is a high-power "white LED driver". The +device provides LED, GPIO and regulator functionalities. + +Required properties: +- compatible: "ti,tps61050" or "ti,tps61052" +- reg: Specifies the I2C slave address + +Optional sub-node: + +This subnode selects the chip's operational mode. +There can be at most one single available subnode. + +- regulator: presence of this sub-node puts the chip in regulator mode. + see ../regulator/regulator.yaml + +- led: presence of this sub-node puts the chip in led mode. + Optional properties: + - function : see ../leds/common.txt + - color : see ../leds/common.txt + - label : see ../leds/common.txt + (deprecated) + +Example (GPIO operation only): + +i2c0 { + tps61052@33 { + compatible = "ti,tps61052"; + reg = <0x33>; + }; +}; + +Example (GPIO + regulator operation): + +i2c0 { + tps61052@33 { + compatible = "ti,tps61052"; + reg = <0x33>; + + regulator { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; + +Example (GPIO + led operation): + +#include + +i2c0 { + tps61052@33 { + compatible = "ti,tps61052"; + reg = <0x33>; + + led { + color = ; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/tps6507x.txt b/Documentation/devicetree/bindings/mfd/tps6507x.txt new file mode 100644 index 000000000..8fffa3c5e --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/tps6507x.txt @@ -0,0 +1,91 @@ +TPS6507x Power Management Integrated Circuit + +Required properties: +- compatible: "ti,tps6507x" +- reg: I2C slave address +- regulators: This is the list of child nodes that specify the regulator + initialization data for defined regulators. Not all regulators for the + given device need to be present. The definition for each of these nodes + is defined using the standard binding for regulators found at + Documentation/devicetree/bindings/regulator/regulator.txt. + The regulator is matched with the regulator-compatible. + + The valid regulator-compatible values are: + tps6507x: vdcdc1, vdcdc2, vdcdc3, vldo1, vldo2 +- xxx-supply: Input voltage supply regulator. + These entries are required if regulators are enabled for a device. + Missing of these properties can cause the regulator registration + fails. + If some of input supply is powered through battery or always-on + supply then also it is require to have these parameters with proper + node handle of always on power supply. + tps6507x: + vindcdc1_2-supply: VDCDC1 and VDCDC2 input. + vindcdc3-supply : VDCDC3 input. + vldo1_2-supply : VLDO1 and VLDO2 input. + +Regulator Optional properties: +- defdcdc_default: It's property of DCDC2 and DCDC3 regulators. + 0: If defdcdc pin of DCDC2/DCDC3 is pulled to GND. + 1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH. + If this property is not defined, it defaults to 0 (not enabled). + +Example: + + pmu: tps6507x@48 { + compatible = "ti,tps6507x"; + reg = <0x48>; + + vindcdc1_2-supply = <&vbat>; + vindcdc3-supply = <...>; + vinldo1_2-supply = <...>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vdcdc1_reg: regulator@0 { + regulator-compatible = "VDCDC1"; + reg = <0>; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3450000>; + regulator-always-on; + regulator-boot-on; + }; + vdcdc2_reg: regulator@1 { + regulator-compatible = "VDCDC2"; + reg = <1>; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <3450000>; + regulator-always-on; + regulator-boot-on; + defdcdc_default = <1>; + }; + vdcdc3_reg: regulator@2 { + regulator-compatible = "VDCDC3"; + reg = <2>; + regulator-min-microvolt = <950000> + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + defdcdc_default = <1>; + }; + ldo1_reg: regulator@3 { + regulator-compatible = "LDO1"; + reg = <3>; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-always-on; + regulator-boot-on; + }; + ldo2_reg: regulator@4 { + regulator-compatible = "LDO2"; + reg = <4>; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1320000>; + regulator-always-on; + regulator-boot-on; + }; + }; + + }; diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt new file mode 100644 index 000000000..a5ced46bb --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/tps65910.txt @@ -0,0 +1,205 @@ +TPS65910 Power Management Integrated Circuit + +Required properties: +- compatible: "ti,tps65910" or "ti,tps65911" +- reg: I2C slave address +- interrupts: the interrupt outputs of the controller +- #gpio-cells: number of cells to describe a GPIO, this should be 2. + The first cell is the GPIO number. + The second cell is used to specify additional options . +- gpio-controller: mark the device as a GPIO controller +- #interrupt-cells: the number of cells to describe an IRQ, this should be 2. + The first cell is the IRQ number. + The second cell is the flags, encoded as the trigger masks from + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +- regulators: This is the list of child nodes that specify the regulator + initialization data for defined regulators. Not all regulators for the given + device need to be present. The definition for each of these nodes is defined + using the standard binding for regulators found at + Documentation/devicetree/bindings/regulator/regulator.txt. + The regulator is matched with the regulator-compatible. + + The valid regulator-compatible values are: + tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1, + vaux2, vaux33, vmmc, vbb + tps65911: vrtc, vio, vdd1, vdd2, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5, + ldo6, ldo7, ldo8 + +- xxx-supply: Input voltage supply regulator. + These entries are required if regulators are enabled for a device. Missing these + properties can cause the regulator registration to fail. + If some of input supply is powered through battery or always-on supply then + also it is require to have these parameters with proper node handle of always + on power supply. + tps65910: + vcc1-supply: VDD1 input. + vcc2-supply: VDD2 input. + vcc3-supply: VAUX33 and VMMC input. + vcc4-supply: VAUX1 and VAUX2 input. + vcc5-supply: VPLL and VDAC input. + vcc6-supply: VDIG1 and VDIG2 input. + vcc7-supply: VRTC and VBB input. + vccio-supply: VIO input. + tps65911: + vcc1-supply: VDD1 input. + vcc2-supply: VDD2 input. + vcc3-supply: LDO6, LDO7 and LDO8 input. + vcc4-supply: LDO5 input. + vcc5-supply: LDO3 and LDO4 input. + vcc6-supply: LDO1 and LDO2 input. + vcc7-supply: VRTC input. + vccio-supply: VIO input. + +Optional properties: +- ti,vmbch-threshold: (tps65911) main battery charged threshold + comparator. (see VMBCH_VSEL in TPS65910 datasheet) +- ti,vmbch2-threshold: (tps65911) main battery discharged threshold + comparator. (see VMBCH_VSEL in TPS65910 datasheet) +- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL + in TPS6591X datasheet) +- ti,en-gpio-sleep: enable sleep control for gpios + There should be 9 entries here, one for each gpio. +- ti,system-power-controller: Telling whether or not this pmic is controlling + the system power. +- ti,sleep-enable: Enable SLEEP state. +- ti,sleep-keep-therm: Keep thermal monitoring on in sleep state. +- ti,sleep-keep-ck32k: Keep the 32KHz clock output on in sleep state. +- ti,sleep-keep-hsclk: Keep high speed internal clock on in sleep state. + +Regulator Optional properties: +- ti,regulator-ext-sleep-control: enable external sleep + control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)] + If this property is not defined, it defaults to 0 (not enabled). + +Example: + + pmu: tps65910@d2 { + compatible = "ti,tps65910"; + reg = <0xd2>; + interrupt-parent = <&intc>; + interrupts = < 0 118 0x04 >; + + #gpio-cells = <2>; + gpio-controller; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + ti,vmbch-threshold = 0; + ti,vmbch2-threshold = 0; + ti,en-ck32k-xtal; + ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; + + vcc1-supply = <®_parent>; + vcc2-supply = <&some_reg>; + vcc3-supply = <...>; + vcc4-supply = <...>; + vcc5-supply = <...>; + vcc6-supply = <...>; + vcc7-supply = <...>; + vccio-supply = <...>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vdd1_reg: regulator@0 { + regulator-compatible = "vdd1"; + reg = <0>; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <0>; + }; + vdd2_reg: regulator@1 { + regulator-compatible = "vdd2"; + reg = <1>; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <4>; + }; + vddctrl_reg: regulator@2 { + regulator-compatible = "vddctrl"; + reg = <2>; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <0>; + }; + vio_reg: regulator@3 { + regulator-compatible = "vio"; + reg = <3>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <1>; + }; + ldo1_reg: regulator@4 { + regulator-compatible = "ldo1"; + reg = <4>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + ti,regulator-ext-sleep-control = <0>; + }; + ldo2_reg: regulator@5 { + regulator-compatible = "ldo2"; + reg = <5>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + ti,regulator-ext-sleep-control = <0>; + }; + ldo3_reg: regulator@6 { + regulator-compatible = "ldo3"; + reg = <6>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + ti,regulator-ext-sleep-control = <0>; + }; + ldo4_reg: regulator@7 { + regulator-compatible = "ldo4"; + reg = <7>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + ti,regulator-ext-sleep-control = <0>; + }; + ldo5_reg: regulator@8 { + regulator-compatible = "ldo5"; + reg = <8>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + ti,regulator-ext-sleep-control = <0>; + }; + ldo6_reg: regulator@9 { + regulator-compatible = "ldo6"; + reg = <9>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + ti,regulator-ext-sleep-control = <0>; + }; + ldo7_reg: regulator@10 { + regulator-compatible = "ldo7"; + reg = <10>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <1>; + }; + ldo8_reg: regulator@11 { + regulator-compatible = "ldo8"; + reg = <11>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + ti,regulator-ext-sleep-control = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt new file mode 100644 index 000000000..8becb183a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/tps65912.txt @@ -0,0 +1,49 @@ +* TPS65912 Power Management Integrated Circuit bindings + +Required properties: + - compatible : Should be "ti,tps65912". + - reg : Slave address or chip select number (I2C / SPI). + - interrupts : The interrupt line the device is connected to. + - interrupt-controller : Marks the device node as an interrupt controller. + - #interrupt-cells : The number of cells to describe an IRQ, should be 2. + The first cell is the IRQ number. + The second cell is the flags, encoded as trigger + masks from ../interrupt-controller/interrupts.txt. + - gpio-controller : Marks the device node as a GPIO Controller. + - #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify flags. + See ../gpio/gpio.txt for more information. + - regulators: : List of child nodes that specify the regulator + initialization data. Child nodes must be named + after their hardware counterparts: dcdc[1-4] and + ldo[1-10]. Each child nodes is defined using the + standard binding for regulators. + +Example: + + pmic: tps65912@2d { + compatible = "ti,tps65912"; + reg = <0x2d>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + regulators { + dcdc1 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/twl-family.txt b/Documentation/devicetree/bindings/mfd/twl-family.txt new file mode 100644 index 000000000..c2f930296 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/twl-family.txt @@ -0,0 +1,46 @@ +Texas Instruments TWL family + +The TWLs are Integrated Power Management Chips. +Some version might contain much more analog function like +USB transceiver or Audio amplifier. +These chips are connected to an i2c bus. + + +Required properties: +- compatible : Must be "ti,twl4030"; + For Integrated power-management/audio CODEC device used in OMAP3 + based boards +- compatible : Must be "ti,twl6030"; + For Integrated power-management used in OMAP4 based boards +- interrupts : This i2c device has an IRQ line connected to the main SoC +- interrupt-controller : Since the twl support several interrupts internally, + it is considered as an interrupt controller cascaded to the SoC one. +- #interrupt-cells = <1>; + +Optional node: +- Child nodes contain in the twl. The twl family is made of several variants + that support a different number of features. + The children nodes will thus depend of the capability of the variant. + + +Example: +/* + * Integrated Power Management Chip + * https://www.ti.com/lit/ds/symlink/twl6030.pdf + */ +twl@48 { + compatible = "ti,twl6030"; + reg = <0x48>; + interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <0>; + + twl_rtc { + compatible = "ti,twl_rtc"; + interrupts = <11>; + reg = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/twl4030-audio.txt b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt new file mode 100644 index 000000000..414d2ae0a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt @@ -0,0 +1,46 @@ +Texas Instruments TWL family (twl4030) audio module + +The audio module inside the TWL family consist of an audio codec and a vibra +driver. + +Required properties: +- compatible : must be "ti,twl4030-audio" + +Optional properties, nodes: + +Audio functionality: +- codec { }: Need to be present if the audio functionality is used. Within this + section the following options can be used: +- ti,digimic_delay: Delay need after enabling the digimic to reduce artifacts + from the start of the recorded sample (in ms) +-ti,ramp_delay_value: HS ramp delay configuration to reduce pop noise +-ti,hs_extmute: Use external mute for HS pop reduction +-ti,hs_extmute_gpio: Use external GPIO to control the external mute +-ti,offset_cncl_path: Offset cancellation path selection, refer to TRM for the + valid values. + +Vibra functionality +- ti,enable-vibra: Need to be set to <1> if the vibra functionality is used. if + missing or it is 0, the vibra functionality is disabled. + +Example: +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + + ti,enable-vibra = <1>; + + codec { + ti,ramp_delay_value = <3>; + }; + + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt new file mode 100644 index 000000000..3d1996331 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt @@ -0,0 +1,48 @@ +Texas Instruments TWL family (twl4030) reset and power management module + +The power management module inside the TWL family provides several facilities +to control the power resources, including power scripts. For now, the +binding only supports the complete shutdown of the system after poweroff. + +Required properties: +- compatible : must be one of the following + "ti,twl4030-power" + "ti,twl4030-power-reset" + "ti,twl4030-power-idle" + "ti,twl4030-power-idle-osc-off" + +The use of ti,twl4030-power-reset is recommended at least on +3530 that needs a special configuration for warm reset to work. + +When using ti,twl4030-power-idle, the TI recommended configuration +for idle modes is loaded to the tlw4030 PMIC. + +When using ti,twl4030-power-idle-osc-off, the TI recommended +configuration is used with the external oscillator being shut +down during off-idle. Note that this does not work on all boards +depending on how the external oscillator is wired. + +Optional properties: + +- ti,system-power-controller: This indicates that TWL4030 is the + power supply master of the system. With this flag, the chip will + initiate an ACTIVE-to-OFF or SLEEP-to-OFF transition when the + system poweroffs. + +- ti,use_poweroff: Deprecated name for ti,system-power-controller + +Example: +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_power: power { + compatible = "ti,twl4030-power"; + ti,use_poweroff; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt new file mode 100644 index 000000000..06e9dd7a0 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/twl6040.txt @@ -0,0 +1,67 @@ +Texas Instruments TWL6040 family + +The TWL6040s are 8-channel high quality low-power audio codecs providing audio, +vibra and GPO functionality on OMAP4+ platforms. +They are connected ot the host processor via i2c for commands, McPDM for audio +data and commands. + +Required properties: +- compatible : "ti,twl6040" for twl6040, "ti,twl6041" for twl6041 +- reg: must be 0x4b for i2c address +- interrupts: twl6040 has one interrupt line connecteded to the main SoC +- gpio-controller: +- #gpio-cells = <1>: twl6040 provides GPO lines. +- #clock-cells = <0>; twl6040 is a provider of pdmclk which is used by McPDM +- twl6040,audpwron-gpio: Power on GPIO line for the twl6040 + +- vio-supply: Regulator for the twl6040 VIO supply +- v2v1-supply: Regulator for the twl6040 V2V1 supply + +Optional properties, nodes: +- enable-active-high: To power on the twl6040 during boot. +- clocks: phandle to the clk32k and/or to mclk clock provider +- clock-names: Must be "clk32k" for the 32K clock and "mclk" for the MCLK. + +Vibra functionality +Required properties: +- vddvibl-supply: Regulator for the left vibra motor +- vddvibr-supply: Regulator for the right vibra motor +- vibra { }: Configuration section for vibra parameters containing the following + properties: +- ti,vibldrv-res: Resistance parameter for left driver +- ti,vibrdrv-res: Resistance parameter for right driver +- ti,viblmotor-res: Resistance parameter for left motor +- ti,viblmotor-res: Resistance parameter for right motor + +Optional properties within vibra { } section: +- vddvibl_uV: If the vddvibl default voltage need to be changed +- vddvibr_uV: If the vddvibr default voltage need to be changed + +Example: +&i2c1 { + twl6040: twl@4b { + compatible = "ti,twl6040"; + + interrupts = <0 119 4>; + interrupt-parent = <&gic>; + twl6040,audpwron-gpio = <&gpio4 31 0>; + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + + /* regulators for vibra motor */ + vddvibl-supply = <&vbat>; + vddvibr-supply = <&vbat>; + + vibra { + /* Vibra driver, motor resistance parameters */ + ti,vibldrv-res = <8>; + ti,vibrdrv-res = <3>; + ti,viblmotor-res = <10>; + ti,vibrmotor-res = <10>; + }; + }; +}; + +/include/ "twl6040.dtsi" diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml new file mode 100644 index 000000000..ea3337daf --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml @@ -0,0 +1,281 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/wlf,arizona.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs + +maintainers: + - patches@opensource.cirrus.com + +description: | + These devices are audio SoCs with extensive digital capabilities and a + range of analogue I/O. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + - $ref: /schemas/sound/wlf,arizona.yaml# + - $ref: /schemas/regulator/wlf,arizona.yaml# + - $ref: /schemas/extcon/wlf,arizona.yaml# + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l24 + - wlf,wm1831 + then: + required: + - DCVDD-supply + - MICVDD-supply + else: + properties: + LDOVDD-supply: + description: + Digital power supply, used internally to generate DCVDD when + internally supplied. + + - if: + properties: + compatible: + contains: + enum: + - wlf,wm1814 + - wlf,wm5102 + - wlf,wm5110 + - wlf,wm8280 + - wlf,wm8997 + - wlf,wm8998 + then: + properties: + DBVDD2-supply: + description: + Databus power supply. + + required: + - DBVDD2-supply + - if: + properties: + compatible: + contains: + enum: + - wlf,wm1814 + - wlf,wm5102 + - wlf,wm5110 + - wlf,wm8280 + - wlf,wm8998 + then: + properties: + DBVDD3-supply: + description: + Databus power supply. + + required: + - DBVDD3-supply + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l24 + - wlf,wm1831 + - wlf,wm8997 + then: + properties: + SPKVDD-supply: + description: + Mono speaker driver power supply. + + required: + - SPKVDD-supply + else: + properties: + SPKVDDL-supply: + description: + Left speaker driver power supply. + + SPKVDDR-supply: + description: + Right speaker driver power supply. + + required: + - SPKVDDL-supply + - SPKVDDR-supply + +properties: + compatible: + enum: + - cirrus,cs47l24 + - wlf,wm1814 + - wlf,wm1831 + - wlf,wm5102 + - wlf,wm5110 + - wlf,wm8280 + - wlf,wm8997 + - wlf,wm8998 + + reg: + maxItems: 1 + + AVDD-supply: + description: + Analogue power supply. + + CPVDD-supply: + description: + Charge pump power supply. + + DBVDD1-supply: + description: + Databus power supply. + + DCVDD-supply: + description: + Digital power supply, normally supplied internally except on cs47l24, + wm1831 where it is mandatory. + + MICVDD-supply: + description: + Microphone power supply, normally supplied internally except on + cs47l24, wm1831 where it is mandatory. + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the pin number and the second cell is used to + specify optional parameters. + const: 2 + + wlf,gpio-defaults: + description: + A list of GPIO configuration register values. Defines for the + appropriate values can found in dt-bindings/mfd/arizona.h. If + absent, no configuration of these registers is performed. If any + entry has a value that is out of range for a 16 bit register then the + chip default will be used. If present exactly five values must be + specified. + $ref: "/schemas/types.yaml#/definitions/uint32-array" + minItems: 1 + maxItems: 5 + + interrupt-controller: true + + '#interrupt-cells': + description: + The first cell is the IRQ number. The second cell is the flags, + encoded as trigger masks. + const: 2 + + interrupts: + maxItems: 1 + + clocks: + description: + Should reference the clocks supplied on MCLK1 and MCLK2. + minItems: 1 + maxItems: 2 + + clock-names: + description: + Should contains two strings mclk1 for the clock supplied on MCLK1, + recommended to be a high quality audio reference clock mclk2 for the + clock supplied on MCLK2, recommended to be an always on 32k clock. + oneOf: + - items: + - const: mclk1 + - items: + - const: mclk2 + - items: + - const: mclk1 + - const: mclk2 + + reset-gpios: + maxItems: 1 + + wlf,reset: + description: + GPIO specifier for the GPIO controlling RESET + deprecated: true + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - AVDD-supply + - CPVDD-supply + - DBVDD1-supply + - gpio-controller + - '#gpio-cells' + - interrupt-controller + - '#interrupt-cells' + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include + i2c@e0004000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0004000 0x1000>; + + wm5102: codec@1a { + compatible = "wlf,wm5102"; + reg = <0x1a>; + + reset-gpios = <&gpio 0>; + wlf,ldoena = <&gpio 1>; + + AVDD-supply = <&vdd1v8>; + DBVDD1-supply = <&vdd1v8>; + DBVDD2-supply = <&vdd1v8>; + DBVDD3-supply = <&vdd1v8>; + CPVDD-supply = <&vdd1v8>; + LDOVDD-supply = <&vdd1v8>; + SPKVDDL-supply = <&vdd5v>; + SPKVDDR-supply = <&vdd5v>; + + interrupts = <347>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + + gpio-controller; + #gpio-cells = <2>; + + #sound-dai-cells = <1>; + + wlf,gpio-defaults = < + ARIZONA_GP_FN_TXLRCLK + ARIZONA_GP_DEFAULT + ARIZONA_GP_DEFAULT + ARIZONA_GP_DEFAULT + ARIZONA_GP_DEFAULT + >; + + clocks = <&clks 0>, <&clks 1>; + clock-names = "mclk1", "mclk2"; + + wlf,inmode = ; + wlf,dmic-ref = ; + + wlf,use-jd2; + wlf,use-jd2-nopull; + wlf,jd-invert; + + wlf,micd-software-compare; + wlf,micd-detect-debounce = <0>; + wlf,micd-pol-gpio = <&codec 2 0>; + wlf,micd-rate = ; + wlf,micd-dbtime = <4>; + wlf,micd-timeout-ms = <100>; + wlf,micd-force-micbias; + wlf,micd-configs = <0 ARIZONA_DMIC_MICBIAS1 0>, + <0x2000 ARIZONA_DMIC_MICBIAS2 1>; + + wlf,gpsw = ; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt new file mode 100644 index 000000000..6b84b1b0d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt @@ -0,0 +1,81 @@ +Cirrus Logic/Wolfson Microelectronics wm831x PMICs + +System PMICs with a wide range of additional features. + +Required properties: + + - compatible : One of the following chip-specific strings: + "wlf,wm8310" + "wlf,wm8311" + "wlf,wm8312" + "wlf,wm8320" + "wlf,wm8321" + "wlf,wm8325" + "wlf,wm8326" + + - reg : I2C slave address when connected using I2C, chip select number + when using SPI. + + - gpio-controller : Indicates this device is a GPIO controller. + - #gpio-cells : Must be 2. The first cell is the pin number and the + second cell is used to specify optional parameters (currently unused). + + - interrupts : The interrupt line the IRQ signal for the device is + connected to. + + - interrupt-controller : wm831x devices contain interrupt controllers and + may provide interrupt services to other devices. + - #interrupt-cells: Must be 2. The first cell is the IRQ number, and the + second cell is the flags, encoded as the trigger masks from + ../interrupt-controller/interrupts.txt + +Optional sub-nodes: + - phys : Contains a phandle to the USB PHY. + - regulators : Contains sub-nodes for each of the regulators supplied by + the device. The regulators are bound using their names listed below: + + dcdc1 : DCDC1 + dcdc2 : DCDC2 + dcdc3 : DCDC3 + dcdc4 : DCDC3 + isink1 : ISINK1 + isink2 : ISINK2 + ldo1 : LDO1 + ldo2 : LDO2 + ldo3 : LDO3 + ldo4 : LDO4 + ldo5 : LDO5 + ldo7 : LDO7 + ldo11 : LDO11 + + The bindings details of each regulator can be found in: + ../regulator/regulator.txt + +Example: + +wm8310: pmic@36 { + compatible = "wlf,wm8310"; + reg = <0x36>; + + gpio-controller; + #gpio-cells = <2>; + + interrupts = <347>; + interrupt-parent = <&gic>; + + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + dcdc1: dcdc1 { + regulator-name = "DCDC1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + ldo1: ldo1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1700000>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml new file mode 100644 index 000000000..309606d2d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mfd/x-powers,ac100.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: X-Powers AC100 + +maintainers: + - Chen-Yu Tsai + +properties: + compatible: + const: x-powers,ac100 + + reg: + maxItems: 1 + + codec: + type: object + + properties: + "#clock-cells": + const: 0 + + compatible: + const: x-powers,ac100-codec + + interrupts: + maxItems: 1 + + clock-output-names: + maxItems: 1 + description: > + Name of the 4M_adda clock exposed by the codec + + required: + - "#clock-cells" + - compatible + - interrupts + - clock-output-names + + additionalProperties: false + + rtc: + type: object + + properties: + "#clock-cells": + const: 1 + + compatible: + const: x-powers,ac100-rtc + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: > + A phandle to the codec's "4M_adda" clock + + clock-output-names: + maxItems: 3 + description: > + Name of the cko1, cko2 and cko3 clocks exposed by the codec + + required: + - "#clock-cells" + - compatible + - interrupts + - clocks + - clock-output-names + + additionalProperties: false + +required: + - compatible + - reg + - codec + - rtc + +additionalProperties: false + +examples: + - | + #include + + rsb { + #address-cells = <1>; + #size-cells = <0>; + + codec@e89 { + compatible = "x-powers,ac100"; + reg = <0xe89>; + + ac100_codec: codec { + compatible = "x-powers,ac100-codec"; + interrupt-parent = <&r_pio>; + interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */ + #clock-cells = <0>; + clock-output-names = "4M_adda"; + }; + + ac100_rtc: rtc { + compatible = "x-powers,ac100-rtc"; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + clocks = <&ac100_codec>; + #clock-cells = <1>; + clock-output-names = "cko1_rtc", "cko2_rtc", "cko3_rtc"; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml new file mode 100644 index 000000000..b7a8747d5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml @@ -0,0 +1,404 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: X-Powers AXP PMIC + +maintainers: + - Chen-Yu Tsai + +allOf: + - if: + properties: + compatible: + contains: + enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + + then: + properties: + regulators: + properties: + x-powers,dcdc-freq: + minimum: 750 + maximum: 1875 + default: 1500 + + else: + properties: + regulators: + properties: + x-powers,dcdc-freq: + minimum: 1800 + maximum: 4050 + default: 3000 + + - if: + properties: + compatible: + contains: + enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + + then: + not: + required: + - x-powers,drive-vbus-en + + - if: + not: + properties: + compatible: + contains: + const: x-powers,axp806 + + then: + allOf: + - not: + required: + - x-powers,self-working-mode + + - not: + required: + - x-powers,master-mode + + - if: + not: + properties: + compatible: + contains: + const: x-powers,axp305 + + then: + required: + - interrupts + +properties: + compatible: + oneOf: + - enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + - x-powers,axp221 + - x-powers,axp223 + - x-powers,axp803 + - x-powers,axp806 + - x-powers,axp809 + - x-powers,axp813 + - items: + - const: x-powers,axp228 + - const: x-powers,axp221 + - items: + - const: x-powers,axp805 + - const: x-powers,axp806 + - items: + - const: x-powers,axp305 + - const: x-powers,axp805 + - const: x-powers,axp806 + - items: + - const: x-powers,axp818 + - const: x-powers,axp813 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + x-powers,drive-vbus-en: + type: boolean + description: > + Set this when the N_VBUSEN pin is used as an output pin to control an + external regulator to drive the OTG VBus, rather then as an input pin + which signals whether the board is driving OTG VBus or not. + + x-powers,self-working-mode: + type: boolean + description: > + Set this when the PMIC is wired for self-working mode through the MODESET + pin. + + x-powers,master-mode: + type: boolean + description: > + Set this when the PMIC is wired for master mode through the MODESET pin. + + vin1-supply: + description: > + DCDC1 power supply node, if present. + + vin2-supply: + description: > + DCDC2 power supply node, if present. + + vin3-supply: + description: > + DCDC3 power supply node, if present. + + vin4-supply: + description: > + DCDC4 power supply node, if present. + + vin5-supply: + description: > + DCDC5 power supply node, if present. + + vin6-supply: + description: > + DCDC6 power supply node, if present. + + vin7-supply: + description: > + DCDC7 power supply node, if present. + + vina-supply: + description: > + DCDCA power supply node, if present. + + vinb-supply: + description: > + DCDCB power supply node, if present. + + vinc-supply: + description: > + DCDCC power supply node, if present. + + vind-supply: + description: > + DCDCD power supply node, if present. + + vine-supply: + description: > + DCDCE power supply node, if present. + + acin-supply: + description: > + LDO1 power supply node, if present. + + ldo24in-supply: + description: > + LDO2 and LDO4 power supply node, if present. + + ldo3in-supply: + description: > + LDO3 power supply node, if present. + + ldo5in-supply: + description: > + LDO5 power supply node, if present. + + aldoin-supply: + description: > + ALDO* power supply node, if present. + + bldoin-supply: + description: > + BLDO* power supply node, if present. + + cldoin-supply: + description: > + CLDO* power supply node, if present. + + dldoin-supply: + description: > + DLDO* power supply node, if present. + + eldoin-supply: + description: > + ELDO* power supply node, if present. + + fldoin-supply: + description: > + FLDO* power supply node, if present. + + ips-supply: + description: > + LDO_IO0, LDO_IO1 and RTC_LDO power supply node, if present. + + drivevbus-supply: + description: > + DRIVEVBUS power supply node, if present. + + swin-supply: + description: > + SW power supply node, if present. + + adc: + $ref: /schemas/iio/adc/x-powers,axp209-adc.yaml# + + gpio: + $ref: /schemas/gpio/x-powers,axp209-gpio.yaml# + + ac-power: + $ref: /schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml# + + battery-power: + $ref: /schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml# + + usb-power: + $ref: /schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml# + + regulators: + type: object + + properties: + x-powers,dcdc-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Defines the work frequency of DC-DC in kHz. + + patternProperties: + "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|drivevbus|dc5ldo)$": + $ref: /schemas/regulator/regulator.yaml# + type: object + unevaluatedProperties: false + + properties: + regulator-ramp-delay: + description: > + Only 800 and 1600 are valid for the DCDC2 and LDO3 regulators on + the AXP209. + + regulator-soft-start: + description: > + Only valid for the LDO3 regulator. + + x-powers,dcdc-workmode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: > + Only valid for DCDC regulators. Setup 1 for PWM mode, 0 + for AUTO (PWM/PFM) mode. The DCDC regulators work in a + mixed PWM/PFM mode, using PFM under light loads and + switching to PWM for heavier loads. Forcing PWM mode + trades efficiency under light loads for lower output + noise. This probably makes sense for HiFi audio related + applications that aren't battery constrained. + + additionalProperties: false + +required: + - compatible + - reg + - "#interrupt-cells" + - interrupt-controller + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pmic@30 { + compatible = "x-powers,axp152"; + reg = <0x30>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + - | + #include + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + ac_power_supply: ac-power { + compatible = "x-powers,axp202-ac-power-supply"; + }; + + axp_adc: adc { + compatible = "x-powers,axp209-adc"; + #io-channel-cells = <1>; + }; + + axp_gpio: gpio { + compatible = "x-powers,axp209-gpio"; + gpio-controller; + #gpio-cells = <2>; + + gpio0-adc-pin { + pins = "GPIO0"; + function = "adc"; + }; + }; + + battery_power_supply: battery-power { + compatible = "x-powers,axp209-battery-power-supply"; + }; + + regulators { + /* Default work frequency for buck regulators */ + x-powers,dcdc-freq = <1500>; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; + }; + + reg_ldo1: ldo1 { + /* LDO1 is a fixed output regulator */ + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-rtc"; + }; + + reg_ldo2: ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; + }; + + reg_ldo3: ldo3 { + regulator-name = "ldo3"; + }; + + reg_ldo4: ldo4 { + regulator-name = "ldo4"; + }; + + reg_ldo5: ldo5 { + regulator-name = "ldo5"; + }; + }; + + usb_power_supply: usb-power { + compatible = "x-powers,axp202-usb-power-supply"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml new file mode 100644 index 000000000..9efd49c39 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Bootlin +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mfd/xylon,logicvc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Xylon LogiCVC multi-function device + +maintainers: + - Paul Kocialkowski + +description: | + The LogiCVC is a display controller that also contains a GPIO controller. + As a result, a multi-function device is exposed as parent of the display + and GPIO blocks. + +properties: + compatible: + items: + - enum: + - xylon,logicvc-3.02.a + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +select: + properties: + compatible: + contains: + enum: + - xylon,logicvc-3.02.a + + required: + - compatible + +patternProperties: + "^gpio@[0-9a-f]+$": + $ref: /schemas/gpio/xylon,logicvc-gpio.yaml# + + "^display@[0-9a-f]+$": + $ref: /schemas/display/xylon,logicvc-display.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + logicvc: logicvc@43c00000 { + compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd"; + reg = <0x43c00000 0x6000>; + }; diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt new file mode 100644 index 000000000..e0f901edc --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt @@ -0,0 +1,39 @@ +Zodiac Inflight Innovations RAVE Supervisory Processor + +RAVE Supervisory Processor communicates with SoC over UART. It is +expected that its Device Tree node is specified as a child of a node +corresponding to UART controller used for communication. + +Required parent device properties: + + - compatible: Should be one of: + - "zii,rave-sp-niu" + - "zii,rave-sp-mezz" + - "zii,rave-sp-esb" + - "zii,rave-sp-rdu1" + - "zii,rave-sp-rdu2" + + - current-speed: Should be set to baud rate SP device is using + +RAVE SP consists of the following sub-devices: + +Device Description +------ ----------- +rave-sp-wdt : Watchdog +rave-sp-nvmem : Interface to onboard EEPROM +rave-sp-backlight : Display backlight +rave-sp-hwmon : Interface to onboard hardware sensors +rave-sp-leds : Interface to onboard LEDs +rave-sp-input : Interface to onboard power button + +Example of usage: + + rdu { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + }; + -- cgit v1.2.3