From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../devicetree/bindings/mips/lantiq/rcu.txt | 69 ++++++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 Documentation/devicetree/bindings/mips/lantiq/rcu.txt (limited to 'Documentation/devicetree/bindings/mips/lantiq/rcu.txt') diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt new file mode 100644 index 000000000..8ec6191c1 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt @@ -0,0 +1,69 @@ +Lantiq XWAY SoC RCU binding +=========================== + +This binding describes the RCU (reset controller unit) multifunction device, +where each sub-device has its own set of registers. + +The RCU register range is used for multiple purposes. Mostly one device +uses one or multiple register exclusively, but for some registers some +bits are for one driver and some other bits are for a different driver. +With this patch all accesses to the RCU registers will go through +syscon. + + +------------------------------------------------------------------------------- +Required properties: +- compatible : The first and second values must be: + "lantiq,xrx200-rcu", "simple-mfd", "syscon" +- reg : The address and length of the system control registers + + +------------------------------------------------------------------------------- +Example of the RCU bindings on a xRX200 SoC: + rcu0: rcu@203000 { + compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon"; + reg = <0x203000 0x100>; + ranges = <0x0 0x203000 0x100>; + big-endian; + + reset0: reset-controller@10 { + compatible = "lantiq,xrx200-reset"; + reg = <0x10 4>, <0x14 4>; + + #reset-cells = <2>; + }; + + reset1: reset-controller@48 { + compatible = "lantiq,xrx200-reset"; + reg = <0x48 4>, <0x24 4>; + + #reset-cells = <2>; + }; + + usb_phy0: usb2-phy@18 { + compatible = "lantiq,xrx200-usb2-phy"; + reg = <0x18 4>, <0x38 4>; + + resets = <&reset1 4 4>, <&reset0 4 4>; + reset-names = "phy", "ctrl"; + #phy-cells = <0>; + }; + + usb_phy1: usb2-phy@34 { + compatible = "lantiq,xrx200-usb2-phy"; + reg = <0x34 4>, <0x3C 4>; + + resets = <&reset1 5 4>, <&reset0 4 4>; + reset-names = "phy", "ctrl"; + #phy-cells = <0>; + }; + + reboot@10 { + compatible = "syscon-reboot"; + reg = <0x10 4>; + + regmap = <&rcu0>; + offset = <0x10>; + mask = <0x40000000>; + }; + }; -- cgit v1.2.3