From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../devicetree/bindings/net/qcom,bam-dmux.yaml | 92 ++++++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml (limited to 'Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml') diff --git a/Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml b/Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml new file mode 100644 index 000000000..b30544410 --- /dev/null +++ b/Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qcom,bam-dmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm BAM Data Multiplexer + +maintainers: + - Stephan Gerhold + +description: | + The BAM Data Multiplexer provides access to the network data channels + of modems integrated into many older Qualcomm SoCs, e.g. Qualcomm MSM8916 + or MSM8974. It is built using a simple protocol layer on top of a DMA engine + (Qualcomm BAM DMA) and bidirectional interrupts to coordinate power control. + + Note that this schema does not directly describe a hardware block but rather + a firmware convention that combines several other hardware blocks (such as the + DMA engine). As such it is specific to a firmware version, not a particular + SoC or hardware version. + +properties: + compatible: + const: qcom,bam-dmux + + interrupts: + description: + Interrupts used by the modem to signal the AP. + Both interrupts must be declared as IRQ_TYPE_EDGE_BOTH. + items: + - description: Power control + - description: Power control acknowledgment + + interrupt-names: + items: + - const: pc + - const: pc-ack + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: State bits used by the AP to signal the modem. + items: + - description: Power control + - description: Power control acknowledgment + + qcom,smem-state-names: + description: Names for the state bits used by the AP to signal the modem. + items: + - const: pc + - const: pc-ack + + dmas: + items: + - description: TX DMA channel phandle + - description: RX DMA channel phandle + + dma-names: + items: + - const: tx + - const: rx + +required: + - compatible + - interrupts + - interrupt-names + - qcom,smem-states + - qcom,smem-state-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include + + mpss: remoteproc { + bam-dmux { + compatible = "qcom,bam-dmux"; + + interrupt-parent = <&modem_smsm>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pc", "pc-ack"; + + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; + qcom,smem-state-names = "pc", "pc-ack"; + + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; + dma-names = "tx", "rx"; + }; + }; -- cgit v1.2.3