From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../devicetree/bindings/reset/lantiq,reset.yaml | 49 ++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/lantiq,reset.yaml (limited to 'Documentation/devicetree/bindings/reset/lantiq,reset.yaml') diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.yaml b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml new file mode 100644 index 000000000..15d65a5dd --- /dev/null +++ b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/lantiq,reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq XWAY SoC RCU reset controller + +maintainers: + - Martin Blumenstingl + +description: | + This binding describes a reset-controller found on the RCU module on Lantiq + XWAY SoCs. This node has to be a sub node of the Lantiq RCU block. + +properties: + compatible: + enum: + - lantiq,danube-reset + - lantiq,xrx200-reset + + reg: + description: | + Defines the following sets of registers in the parent syscon device + Offset of the reset set register + Offset of the reset status register + maxItems: 2 + + '#reset-cells': + description: | + The first cell takes the reset set bit and the second cell takes the + status bit. + const: 2 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + // On the xRX200 SoCs: + reset0: reset-controller@10 { + compatible = "lantiq,xrx200-reset"; + reg = <0x10 0x04>, <0x14 0x04>; + #reset-cells = <2>; + }; -- cgit v1.2.3