From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../reset/allwinner,sun6i-a31-clock-reset.yaml | 68 ++++++++++++ .../devicetree/bindings/reset/altr,rst-mgr.yaml | 47 ++++++++ .../reset/amlogic,meson-axg-audio-arb.yaml | 56 ++++++++++ .../bindings/reset/amlogic,meson-reset.yaml | 41 +++++++ .../bindings/reset/atmel,at91sam9260-reset.yaml | 68 ++++++++++++ .../bindings/reset/bitmain,bm1880-reset.yaml | 36 +++++++ .../reset/brcm,bcm4908-misc-pcie-reset.yaml | 39 +++++++ .../bindings/reset/brcm,bcm63138-pmb.txt | 19 ++++ .../bindings/reset/brcm,bcm6345-reset.yaml | 37 +++++++ .../reset/brcm,bcm7216-pcie-sata-rescal.yaml | 41 +++++++ .../bindings/reset/brcm,brcmstb-reset.yaml | 48 +++++++++ .../devicetree/bindings/reset/canaan,k210-rst.yaml | 40 +++++++ .../bindings/reset/delta,tn48m-reset.yaml | 35 ++++++ .../devicetree/bindings/reset/fsl,imx-src.yaml | 81 ++++++++++++++ .../devicetree/bindings/reset/fsl,imx7-src.yaml | 65 ++++++++++++ .../bindings/reset/hisilicon,hi3660-reset.yaml | 81 ++++++++++++++ .../bindings/reset/img,pistachio-reset.txt | 55 ++++++++++ .../devicetree/bindings/reset/intel,rcu-gw.yaml | 65 ++++++++++++ .../devicetree/bindings/reset/lantiq,reset.yaml | 49 +++++++++ .../bindings/reset/marvell,berlin2-reset.yaml | 38 +++++++ .../devicetree/bindings/reset/microchip,rst.yaml | 59 +++++++++++ .../bindings/reset/nuvoton,npcm750-reset.yaml | 58 ++++++++++ .../devicetree/bindings/reset/nxp,lpc1850-rgu.txt | 83 +++++++++++++++ .../devicetree/bindings/reset/oxnas,reset.txt | 32 ++++++ .../bindings/reset/qca,ar7100-reset.yaml | 40 +++++++ .../devicetree/bindings/reset/qcom,aoss-reset.yaml | 52 +++++++++ .../devicetree/bindings/reset/qcom,pdc-global.yaml | 51 +++++++++ .../devicetree/bindings/reset/renesas,rst.yaml | 68 ++++++++++++ .../bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml | 67 ++++++++++++ Documentation/devicetree/bindings/reset/reset.txt | 75 +++++++++++++ .../bindings/reset/snps,axs10x-reset.yaml | 48 +++++++++ .../devicetree/bindings/reset/snps,dw-reset.txt | 30 ++++++ .../devicetree/bindings/reset/snps,hsdk-reset.txt | 28 +++++ .../reset/socionext,uniphier-glue-reset.yaml | 113 ++++++++++++++++++++ .../bindings/reset/socionext,uniphier-reset.yaml | 118 +++++++++++++++++++++ .../devicetree/bindings/reset/st,sti-softreset.txt | 44 ++++++++ .../bindings/reset/st,stih407-picophyreset.yaml | 47 ++++++++ .../bindings/reset/st,stih407-powerdown.yaml | 49 +++++++++ .../devicetree/bindings/reset/st,stm32-rcc.txt | 6 ++ .../devicetree/bindings/reset/st,stm32mp1-rcc.txt | 6 ++ .../bindings/reset/starfive,jh7100-reset.yaml | 38 +++++++ .../devicetree/bindings/reset/sunplus,reset.yaml | 38 +++++++ .../devicetree/bindings/reset/ti,sci-reset.yaml | 51 +++++++++ .../bindings/reset/ti,tps380x-reset.yaml | 49 +++++++++ .../devicetree/bindings/reset/ti-syscon-reset.txt | 91 ++++++++++++++++ .../bindings/reset/xlnx,zynqmp-reset.txt | 55 ++++++++++ .../devicetree/bindings/reset/zynq-reset.txt | 68 ++++++++++++ 47 files changed, 2473 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml create mode 100644 Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml create mode 100644 Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt create mode 100644 Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml create mode 100644 Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml create mode 100644 Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/fsl,imx-src.yaml create mode 100644 Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml create mode 100644 Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/img,pistachio-reset.txt create mode 100644 Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml create mode 100644 Documentation/devicetree/bindings/reset/lantiq,reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/microchip,rst.yaml create mode 100644 Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt create mode 100644 Documentation/devicetree/bindings/reset/oxnas,reset.txt create mode 100644 Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml create mode 100644 Documentation/devicetree/bindings/reset/renesas,rst.yaml create mode 100644 Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml create mode 100644 Documentation/devicetree/bindings/reset/reset.txt create mode 100644 Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/snps,dw-reset.txt create mode 100644 Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt create mode 100644 Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/st,sti-softreset.txt create mode 100644 Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml create mode 100644 Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt create mode 100644 Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt create mode 100644 Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/sunplus,reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/ti,sci-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml create mode 100644 Documentation/devicetree/bindings/reset/ti-syscon-reset.txt create mode 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt create mode 100644 Documentation/devicetree/bindings/reset/zynq-reset.txt (limited to 'Documentation/devicetree/bindings/reset') diff --git a/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml b/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml new file mode 100644 index 000000000..2a248e511 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/allwinner,sun6i-a31-clock-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 Peripheral Reset Controller + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +deprecated: true + +select: + properties: + compatible: + contains: + enum: + - allwinner,sun6i-a31-ahb1-reset + - allwinner,sun6i-a31-clock-reset + + # The PRCM on the A31 and A23 will have the reg property missing, + # since it's set at the upper level node, and will be validated by + # PRCM's schema. Make sure we only validate standalone nodes. + required: + - compatible + - reg + +properties: + "#reset-cells": + const: 1 + description: > + This additional argument passed to that reset controller is the + offset of the bit controlling this particular reset line in the + register. + + compatible: + enum: + - allwinner,sun6i-a31-ahb1-reset + - allwinner,sun6i-a31-clock-reset + + reg: + maxItems: 1 + +required: + - "#reset-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + ahb1_rst: reset@1c202c0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-ahb1-reset"; + reg = <0x01c202c0 0xc>; + }; + + - | + apbs_rst: reset@80014b0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x080014b0 0x4>; + }; + +... diff --git a/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml new file mode 100644 index 000000000..4379cec6b --- /dev/null +++ b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/altr,rst-mgr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera SOCFPGA Reset Manager + +maintainers: + - Dinh Nguyen + +properties: + compatible: + oneOf: + - description: Cyclone5/Arria5/Arria10 + const: altr,rst-mgr + - description: Stratix10 ARM64 SoC + items: + - const: altr,stratix10-rst-mgr + - const: altr,rst-mgr + + reg: + maxItems: 1 + + altr,modrst-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Offset of the first modrst register + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - altr,modrst-offset + - '#reset-cells' + +additionalProperties: false + +examples: + - | + rstmgr@ffd05000 { + compatible = "altr,rst-mgr"; + reg = <0xffd05000 0x1000>; + altr,modrst-offset = <0x10>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml new file mode 100644 index 000000000..704a502ad --- /dev/null +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/amlogic,meson-axg-audio-arb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic audio memory arbiter controller + +maintainers: + - Jerome Brunet + +description: The Amlogic Audio ARB is a simple device which enables or disables + the access of Audio FIFOs to DDR on AXG based SoC. + +properties: + compatible: + enum: + - amlogic,meson-axg-audio-arb + - amlogic,meson-sm1-audio-arb + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: | + phandle to the fifo peripheral clock provided by the audio clock + controller. + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - "#reset-cells" + +additionalProperties: false + +examples: + - | + // on the A113 SoC: + #include + bus { + #address-cells = <2>; + #size-cells = <2>; + + arb: reset-controller@280 { + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + }; diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml new file mode 100644 index 000000000..98db2aa74 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/amlogic,meson-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson SoC Reset Controller + +maintainers: + - Neil Armstrong + +properties: + compatible: + enum: + - amlogic,meson8b-reset # Reset Controller on Meson8b and compatible SoCs + - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs + - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs + - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs + - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + reset-controller@c884404 { + compatible = "amlogic,meson-gxbb-reset"; + reg = <0xc884404 0x20>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml b/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml new file mode 100644 index 000000000..98465d269 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/atmel,at91sam9260-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel/Microchip System Reset Controller + +maintainers: + - Claudiu Beznea + +description: | + The system reset controller can be used to reset the CPU. In case of + SAMA7G5 it can also reset some devices (e.g. USB PHYs). + +properties: + compatible: + oneOf: + - items: + - enum: + - atmel,at91sam9260-rstc + - atmel,at91sam9g45-rstc + - atmel,sama5d3-rstc + - microchip,sam9x60-rstc + - microchip,sama7g5-rstc + - items: + - const: atmel,sama5d3-rstc + - const: atmel,at91sam9g45-rstc + + reg: + minItems: 1 + items: + - description: base registers for system reset control + - description: registers for device specific reset control + + clocks: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - clocks + +allOf: + - if: + properties: + compatible: + contains: + enum: + - microchip,sama7g5-rstc + then: + required: + - "#reset-cells" + +additionalProperties: false + +examples: + - | + #include + + reset-controller@fffffd00 { + compatible = "atmel,at91sam9260-rstc"; + reg = <0xfffffd00 0x10>; + clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>; + }; diff --git a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml new file mode 100644 index 000000000..f0aca7443 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Manivannan Sadhasivam +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/bitmain,bm1880-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Bitmain BM1880 SoC Reset Controller + +maintainers: + - Manivannan Sadhasivam + +properties: + compatible: + const: bitmain,bm1880-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + rst: reset-controller@c00 { + compatible = "bitmain,bm1880-reset"; + reg = <0xc00 0x8>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml new file mode 100644 index 000000000..88aebb370 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/brcm,bcm4908-misc-pcie-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom MISC block PCIe reset controller + +description: This document describes reset controller handling PCIe PERST# + signals. On BCM4908 it's a part of the MISC block. + +maintainers: + - Rafał Miłecki + +properties: + compatible: + const: brcm,bcm4908-misc-pcie-reset + + reg: + maxItems: 1 + + "#reset-cells": + description: PCIe core id + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + reset-controller@ff802644 { + compatible = "brcm,bcm4908-misc-pcie-reset"; + reg = <0xff802644 0x04>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt b/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt new file mode 100644 index 000000000..a98872d27 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt @@ -0,0 +1,19 @@ +Broadcom BCM63138 Processor Monitor Bus binding +=============================================== + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Require properties: + +- compatible: must be "brcm,bcm63138-pmb" +- reg: base register address and size for this bus controller +- #reset-cells: must be 2 first cell is the address within the bus instance designated + by the phandle, and the second is the number of zones for this peripheral + +Example: + pmb0: reset-controller@4800c0 { + compatible = "brcm,bcm63138-pmb"; + reg = <0x4800c0 0x10>; + #reset-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.yaml new file mode 100644 index 000000000..560cf6522 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/brcm,bcm6345-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: BCM6345 reset controller + +description: This document describes the BCM6345 reset controller. + +maintainers: + - Álvaro Fernández Rojas + +properties: + compatible: + const: brcm,bcm6345-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + reset-controller@10000010 { + compatible = "brcm,bcm6345-reset"; + reg = <0x10000010 0x4>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml new file mode 100644 index 000000000..dfce6738b --- /dev/null +++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 Broadcom +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/brcm,bcm7216-pcie-sata-rescal.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: BCM7216 RESCAL reset controller + +description: This document describes the BCM7216 RESCAL reset controller + which is responsible for controlling the reset of the SATA and PCIe0/1 + instances on BCM7216. + +maintainers: + - Florian Fainelli + - Jim Quinlan + +properties: + compatible: + const: brcm,bcm7216-pcie-sata-rescal + + reg: + maxItems: 1 + + "#reset-cells": + const: 0 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + reset-controller@8b2c800 { + compatible = "brcm,bcm7216-pcie-sata-rescal"; + reg = <0x8b2c800 0x10>; + #reset-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.yaml b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.yaml new file mode 100644 index 000000000..e00efa88a --- /dev/null +++ b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/brcm,brcmstb-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Broadcom STB SW_INIT-style reset controller + +description: + Broadcom STB SoCs have a SW_INIT-style reset controller with separate + SET/CLEAR/STATUS registers and possibly multiple banks, each of 32 bit + reset lines. + + Please also refer to reset.txt in this directory for common reset + controller binding usage. + +maintainers: + - Florian Fainelli + +properties: + compatible: + const: brcm,brcmstb-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + reset: reset-controller@8404318 { + compatible = "brcm,brcmstb-reset"; + reg = <0x8404318 0x30>; + #reset-cells = <1>; + }; + + ethernet_switch { + resets = <&reset 26>; + reset-names = "switch"; + }; diff --git a/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml b/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml new file mode 100644 index 000000000..ee8a2dcf5 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/canaan,k210-rst.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Canaan Kendryte K210 Reset Controller + +maintainers: + - Damien Le Moal + +description: | + Canaan Kendryte K210 reset controller driver which supports the SoC + system controller supplied reset registers for the various peripherals + of the SoC. The K210 reset controller node must be defined as a child + node of the K210 system controller node. + + See also: + - dt-bindings/reset/k210-rst.h + +properties: + compatible: + const: canaan,k210-rst + + '#reset-cells': + const: 1 + +required: + - '#reset-cells' + - compatible + +additionalProperties: false + +examples: + - | + #include + sysrst: reset-controller { + compatible = "canaan,k210-rst"; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml b/Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml new file mode 100644 index 000000000..0e5ee8dec --- /dev/null +++ b/Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/delta,tn48m-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Delta Networks TN48M CPLD reset controller + +maintainers: + - Robert Marko + +description: | + This module is part of the Delta TN48M multi-function device. For more + details see ../mfd/delta,tn48m-cpld.yaml. + + Reset controller modules provides resets for the following: + * 88F7040 SoC + * 88F6820 SoC + * 98DX3265 switch MAC-s + * 88E1680 PHY-s + * 88E1512 PHY + * PoE PSE controller + +properties: + compatible: + const: delta,tn48m-reset + + "#reset-cells": + const: 1 + +required: + - compatible + - "#reset-cells" + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml new file mode 100644 index 000000000..b11ac533f --- /dev/null +++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/fsl,imx-src.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX System Reset Controller + +maintainers: + - Philipp Zabel + +description: | + The system reset controller can be used to reset the GPU, VPU, + IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device + nodes should specify the reset line on the SRC in their resets + property, containing a phandle to the SRC device node and a + RESET_INDEX specifying which module to reset, as described in + reset.txt + + The following RESET_INDEX values are valid for i.MX5: + GPU_RESET 0 + VPU_RESET 1 + IPU1_RESET 2 + OPEN_VG_RESET 3 + The following additional RESET_INDEX value is valid for i.MX6: + IPU2_RESET 4 + +properties: + compatible: + oneOf: + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx50-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx53-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx6q-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx6sx-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx6sl-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx6ul-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx6sll-src" + - const: "fsl,imx51-src" + + reg: + maxItems: 1 + + interrupts: + items: + - description: SRC interrupt + - description: CPU WDOG interrupts out of SRC + minItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#reset-cells' + +additionalProperties: false + +examples: + - | + reset-controller@73fd0000 { + compatible = "fsl,imx51-src"; + reg = <0x73fd0000 0x4000>; + interrupts = <75>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml new file mode 100644 index 000000000..00430e2ea --- /dev/null +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/fsl,imx7-src.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX7 System Reset Controller + +maintainers: + - Andrey Smirnov + +description: | + The system reset controller can be used to reset various set of + peripherals. Device nodes that need access to reset lines should + specify them as a reset phandle in their corresponding node as + specified in reset.txt. + + For list of all valid reset indices see + for i.MX7, + for i.MX8MQ, i.MX8MM and i.MX8MN, + for i.MX8MP. + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx7d-src + - fsl,imx8mq-src + - fsl,imx8mp-src + - const: syscon + - items: + - enum: + - fsl,imx8mm-src + - fsl,imx8mn-src + - const: fsl,imx8mq-src + - const: syscon + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include + + reset-controller@30390000 { + compatible = "fsl,imx7d-src", "syscon"; + reg = <0x30390000 0x2000>; + interrupts = ; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml new file mode 100644 index 000000000..cdfcf32c5 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/hisilicon,hi3660-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon System Reset Controller + +maintainers: + - Wei Xu + +description: | + Please also refer to reset.txt in this directory for common reset + controller binding usage. + The reset controller registers are part of the system-ctl block on + hi3660 and hi3670 SoCs. + +properties: + compatible: + oneOf: + - items: + - const: hisilicon,hi3660-reset + - items: + - const: hisilicon,hi3670-reset + - const: hisilicon,hi3660-reset + + hisi,rst-syscon: + deprecated: true + description: phandle of the reset's syscon, use hisilicon,rst-syscon instead + $ref: /schemas/types.yaml#/definitions/phandle + + hisilicon,rst-syscon: + description: phandle of the reset's syscon. + $ref: /schemas/types.yaml#/definitions/phandle + + '#reset-cells': + description: | + Specifies the number of cells needed to encode a reset source. + Cell #1 : offset of the reset assert control register from the syscon + register base + offset + 4: deassert control register + offset + 8: status control register + Cell #2 : bit position of the reset in the reset control register + const: 2 + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include + #include + #include + + iomcu: iomcu@ffd7e000 { + compatible = "hisilicon,hi3660-iomcu", "syscon"; + reg = <0xffd7e000 0x1000>; + }; + + iomcu_rst: iomcu_rst_controller { + compatible = "hisilicon,hi3660-reset"; + hisilicon,rst-syscon = <&iomcu>; + #reset-cells = <2>; + }; + + /* Specifying reset lines connected to IP modules */ + i2c@ffd71000 { + compatible = "snps,designware-i2c"; + reg = <0xffd71000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>; + resets = <&iomcu_rst 0x20 3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; + }; +... diff --git a/Documentation/devicetree/bindings/reset/img,pistachio-reset.txt b/Documentation/devicetree/bindings/reset/img,pistachio-reset.txt new file mode 100644 index 000000000..8c05d1636 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/img,pistachio-reset.txt @@ -0,0 +1,55 @@ +Pistachio Reset Controller +============================================================================= + +This binding describes a reset controller device that is used to enable and +disable individual IP blocks within the Pistachio SoC using "soft reset" +control bits found in the Pistachio SoC top level registers. + +The actual action taken when soft reset is asserted is hardware dependent. +However, when asserted it may not be possible to access the hardware's +registers, and following an assert/deassert sequence the hardware's previous +state may no longer be valid. + +Please refer to Documentation/devicetree/bindings/reset/reset.txt +for common reset controller binding usage. + +Required properties: + +- compatible: Contains "img,pistachio-reset" + +- #reset-cells: Contains 1 + +Example: + + cr_periph: clk@18148000 { + compatible = "img,pistachio-cr-periph", "syscon", "simple-mfd"; + reg = <0x18148000 0x1000>; + clocks = <&clk_periph PERIPH_CLK_SYS>; + clock-names = "sys"; + #clock-cells = <1>; + + pistachio_reset: reset-controller { + compatible = "img,pistachio-reset"; + #reset-cells = <1>; + }; + }; + +Specifying reset control of devices +======================================= + +Device nodes should specify the reset channel required in their "resets" +property, containing a phandle to the pistachio reset device node and an +index specifying which reset to use, as described in +Documentation/devicetree/bindings/reset/reset.txt. + +Example: + + spdif_out: spdif-out@18100d00 { + ... + resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>; + reset-names = "rst"; + ... + }; + +Macro definitions for the supported resets can be found in: +include/dt-bindings/reset/pistachio-resets.h diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml new file mode 100644 index 000000000..13bf6bb3f --- /dev/null +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/intel,rcu-gw.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: System Reset Controller on Intel Gateway SoCs + +maintainers: + - Dilip Kota + +properties: + compatible: + enum: + - intel,rcu-lgm + - intel,rcu-xrx200 + + reg: + description: Reset controller registers. + maxItems: 1 + + intel,global-reset: + description: Global reset register offset and bit offset. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: Register offset + - description: Register bit offset + minimum: 0 + maximum: 31 + + "#reset-cells": + minimum: 2 + maximum: 3 + description: | + First cell is reset request register offset. + Second cell is bit offset in reset request register. + Third cell is bit offset in reset status register. + For LGM SoC, reset cell count is 2 as bit offset in + reset request and reset status registers is same. Whereas + 3 for legacy SoCs as bit offset differs. + +required: + - compatible + - reg + - intel,global-reset + - "#reset-cells" + +additionalProperties: false + +examples: + - | + rcu0: reset-controller@e0000000 { + compatible = "intel,rcu-lgm"; + reg = <0xe0000000 0x20000>; + intel,global-reset = <0x10 30>; + #reset-cells = <2>; + }; + + pwm: pwm@e0d00000 { + compatible = "intel,lgm-pwm"; + reg = <0xe0d00000 0x30>; + clocks = <&cgu0 1>; + #pwm-cells = <2>; + resets = <&rcu0 0x30 21>; + }; diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.yaml b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml new file mode 100644 index 000000000..15d65a5dd --- /dev/null +++ b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/lantiq,reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq XWAY SoC RCU reset controller + +maintainers: + - Martin Blumenstingl + +description: | + This binding describes a reset-controller found on the RCU module on Lantiq + XWAY SoCs. This node has to be a sub node of the Lantiq RCU block. + +properties: + compatible: + enum: + - lantiq,danube-reset + - lantiq,xrx200-reset + + reg: + description: | + Defines the following sets of registers in the parent syscon device + Offset of the reset set register + Offset of the reset status register + maxItems: 2 + + '#reset-cells': + description: | + The first cell takes the reset set bit and the second cell takes the + status bit. + const: 2 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + // On the xRX200 SoCs: + reset0: reset-controller@10 { + compatible = "lantiq,xrx200-reset"; + reg = <0x10 0x04>, <0x14 0x04>; + #reset-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml b/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml new file mode 100644 index 000000000..d71d0f0a1 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2015 Antoine Tenart +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/marvell,berlin2-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Marvell Berlin reset controller + +maintainers: + - Antoine Tenart + +description: The reset controller node must be a sub-node of the chip + controller node on Berlin SoCs. + +properties: + compatible: + const: marvell,berlin2-reset + + "#reset-cells": + const: 2 + +required: + - compatible + - "#reset-cells" + +additionalProperties: false + +examples: + - | + chip: chip-control@ea0000 { + reg = <0xea0000 0x400>; + + chip_rst: reset { + compatible = "marvell,berlin2-reset"; + #reset-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/reset/microchip,rst.yaml b/Documentation/devicetree/bindings/reset/microchip,rst.yaml new file mode 100644 index 000000000..81cd8c837 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/microchip,rst.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/microchip,rst.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Microchip Sparx5 Switch Reset Controller + +maintainers: + - Steen Hegelund + - Lars Povlsen + +description: | + The Microchip Sparx5 Switch provides reset control and implements the following + functions + - One Time Switch Core Reset (Soft Reset) + +properties: + $nodename: + pattern: "^reset-controller@[0-9a-f]+$" + + compatible: + enum: + - microchip,sparx5-switch-reset + - microchip,lan966x-switch-reset + + reg: + items: + - description: global control block registers + + reg-names: + items: + - const: gcb + + "#reset-cells": + const: 1 + + cpu-syscon: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: syscon used to access CPU reset + +required: + - compatible + - reg + - reg-names + - "#reset-cells" + - cpu-syscon + +additionalProperties: false + +examples: + - | + reset: reset-controller@11010008 { + compatible = "microchip,sparx5-switch-reset"; + reg = <0x11010008 0x4>; + reg-names = "gcb"; + #reset-cells = <1>; + cpu-syscon = <&cpu_ctrl>; + }; diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml new file mode 100644 index 000000000..d82e65e37 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/nuvoton,npcm750-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM Reset controller + +maintainers: + - Tomer Maimon + +properties: + compatible: + enum: + - nuvoton,npcm750-reset # Poleg NPCM7XX SoC + - nuvoton,npcm845-reset # Arbel NPCM8XX SoC + + reg: + maxItems: 1 + + '#reset-cells': + const: 2 + + nuvoton,sysgcr: + $ref: /schemas/types.yaml#/definitions/phandle + description: a phandle to access GCR registers. + + nuvoton,sw-reset-number: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + description: | + Contains the software reset number to restart the SoC. + If not specified, software reset is disabled. + +required: + - compatible + - reg + - '#reset-cells' + - nuvoton,sysgcr + +additionalProperties: false + +examples: + - | + #include + rstc: rstc@f0801000 { + compatible = "nuvoton,npcm750-reset"; + reg = <0xf0801000 0x70>; + #reset-cells = <2>; + nuvoton,sysgcr = <&gcr>; + nuvoton,sw-reset-number = <2>; + }; + + // Specifying reset lines connected to IP NPCM7XX modules + spi0: spi { + resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>; + }; diff --git a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt new file mode 100644 index 000000000..05d5be48d --- /dev/null +++ b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt @@ -0,0 +1,83 @@ +NXP LPC1850 Reset Generation Unit (RGU) +======================================== + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: Should be "nxp,lpc1850-rgu" +- reg: register base and length +- clocks: phandle and clock specifier to RGU clocks +- clock-names: should contain "delay" and "reg" +- #reset-cells: should be 1 + +See table below for valid peripheral reset numbers. Numbers not +in the table below are either reserved or not applicable for +normal operation. + +Reset Peripheral + 9 System control unit (SCU) + 12 ARM Cortex-M0 subsystem core (LPC43xx only) + 13 CPU core + 16 LCD controller + 17 USB0 + 18 USB1 + 19 DMA + 20 SDIO + 21 External memory controller (EMC) + 22 Ethernet + 25 Flash bank A + 27 EEPROM + 28 GPIO + 29 Flash bank B + 32 Timer0 + 33 Timer1 + 34 Timer2 + 35 Timer3 + 36 Repetitive Interrupt timer (RIT) + 37 State Configurable Timer (SCT) + 38 Motor control PWM (MCPWM) + 39 QEI + 40 ADC0 + 41 ADC1 + 42 DAC + 44 USART0 + 45 UART1 + 46 USART2 + 47 USART3 + 48 I2C0 + 49 I2C1 + 50 SSP0 + 51 SSP1 + 52 I2S0 and I2S1 + 53 Serial Flash Interface (SPIFI) + 54 C_CAN1 + 55 C_CAN0 + 56 ARM Cortex-M0 application core (LPC4370 only) + 57 SGPIO (LPC43xx only) + 58 SPI (LPC43xx only) + 60 ADCHS (12-bit ADC) (LPC4370 only) + +Refer to NXP LPC18xx or LPC43xx user manual for more details about +the reset signals and the connected block/peripheral. + +Reset provider example: +rgu: reset-controller@40053000 { + compatible = "nxp,lpc1850-rgu"; + reg = <0x40053000 0x1000>; + clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>; + clock-names = "delay", "reg"; + #reset-cells = <1>; +}; + +Reset consumer example: +mac: ethernet@40010000 { + compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac"; + reg = <0x40010000 0x2000>; + interrupts = <5>; + interrupt-names = "macirq"; + clocks = <&ccu1 CLK_CPU_ETHERNET>; + clock-names = "stmmaceth"; + resets = <&rgu 22>; + reset-names = "stmmaceth"; +}; diff --git a/Documentation/devicetree/bindings/reset/oxnas,reset.txt b/Documentation/devicetree/bindings/reset/oxnas,reset.txt new file mode 100644 index 000000000..d27ccb5d0 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/oxnas,reset.txt @@ -0,0 +1,32 @@ +Oxford Semiconductor OXNAS SoC Family RESET Controller +================================================ + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: For OX810SE, should be "oxsemi,ox810se-reset" + For OX820, should be "oxsemi,ox820-reset" +- #reset-cells: 1, see below + +Parent node should have the following properties : +- compatible: For OX810SE, should be : + "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" + For OX820, should be : + "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd" + +Reset indices are in dt-bindings include files : +- For OX810SE: include/dt-bindings/reset/oxsemi,ox810se.h +- For OX820: include/dt-bindings/reset/oxsemi,ox820.h + +example: + +sys: sys-ctrl@000000 { + compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; + reg = <0x000000 0x100000>; + + reset: reset-controller { + compatible = "oxsemi,ox810se-reset"; + #reset-cells = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml b/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml new file mode 100644 index 000000000..9be60e55c --- /dev/null +++ b/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2015 Alban Bedel +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/qca,ar7100-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Atheros AR7xxx/AR9XXX reset controller + +maintainers: + - Alban Bedel + +properties: + compatible: + items: + - enum: + - qca,ar9132-reset + - qca,ar9331-reset + - const: qca,ar7100-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + reset-controller@1806001c { + compatible = "qca,ar9132-reset", "qca,ar7100-reset"; + reg = <0x1806001c 0x4>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml new file mode 100644 index 000000000..d92e2b3cc --- /dev/null +++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/qcom,aoss-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm AOSS Reset Controller + +maintainers: + - Sibi Sankar + +description: + The bindings describe the reset-controller found on AOSS-CC (always on + subsystem) for Qualcomm Technologies Inc SoCs. + +properties: + compatible: + oneOf: + - description: on SC7180 SoCs the following compatibles must be specified + items: + - const: "qcom,sc7180-aoss-cc" + - const: "qcom,sdm845-aoss-cc" + + - description: on SC7280 SoCs the following compatibles must be specified + items: + - const: "qcom,sc7280-aoss-cc" + - const: "qcom,sdm845-aoss-cc" + + - description: on SDM845 SoCs the following compatibles must be specified + items: + - const: "qcom,sdm845-aoss-cc" + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sdm845-aoss-cc"; + reg = <0xc2a0000 0x31000>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml new file mode 100644 index 000000000..ca5d79332 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/qcom,pdc-global.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PDC Global + +maintainers: + - Sibi Sankar + +description: + The bindings describes the reset-controller found on PDC-Global (Power Domain + Controller) block for Qualcomm Technologies Inc SoCs. + +properties: + compatible: + oneOf: + - description: on SC7180 SoCs the following compatibles must be specified + items: + - const: "qcom,sc7180-pdc-global" + - const: "qcom,sdm845-pdc-global" + + - description: on SC7280 SoCs the following compatibles must be specified + items: + - const: "qcom,sc7280-pdc-global" + + - description: on SDM845 SoCs the following compatibles must be specified + items: + - const: "qcom,sdm845-pdc-global" + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + pdc_reset: reset-controller@b2e0000 { + compatible = "qcom,sdm845-pdc-global"; + reg = <0xb2e0000 0x20000>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml new file mode 100644 index 000000000..0d1b89e2f --- /dev/null +++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/renesas,rst.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas R-Car and RZ/G Reset Controller + +maintainers: + - Geert Uytterhoeven + - Magnus Damm + +description: | + The R-Car and RZ/G Reset Controllers provide reset control, and implement the + following functions: + - Latching of the levels on mode pins when PRESET# is negated, + - Mode monitoring register, + - Reset control of peripheral devices (on R-Car Gen1), + - Watchdog timer (on R-Car Gen1), + - Register-based reset control and boot address registers for the various + CPU cores (on R-Car Gen2 and Gen3, and on RZ/G). + +properties: + compatible: + enum: + - renesas,r8a7742-rst # RZ/G1H + - renesas,r8a7743-rst # RZ/G1M + - renesas,r8a7744-rst # RZ/G1N + - renesas,r8a7745-rst # RZ/G1E + - renesas,r8a77470-rst # RZ/G1C + - renesas,r8a774a1-rst # RZ/G2M + - renesas,r8a774b1-rst # RZ/G2N + - renesas,r8a774c0-rst # RZ/G2E + - renesas,r8a774e1-rst # RZ/G2H + - renesas,r8a7778-reset-wdt # R-Car M1A + - renesas,r8a7779-reset-wdt # R-Car H1 + - renesas,r8a7790-rst # R-Car H2 + - renesas,r8a7791-rst # R-Car M2-W + - renesas,r8a7792-rst # R-Car V2H + - renesas,r8a7793-rst # R-Car M2-N + - renesas,r8a7794-rst # R-Car E2 + - renesas,r8a7795-rst # R-Car H3 + - renesas,r8a7796-rst # R-Car M3-W + - renesas,r8a77961-rst # R-Car M3-W+ + - renesas,r8a77965-rst # R-Car M3-N + - renesas,r8a77970-rst # R-Car V3M + - renesas,r8a77980-rst # R-Car V3H + - renesas,r8a77990-rst # R-Car E3 + - renesas,r8a77995-rst # R-Car D3 + - renesas,r8a779a0-rst # R-Car V3U + - renesas,r8a779f0-rst # R-Car S4-8 + - renesas,r8a779g0-rst # R-Car V4H + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7795-rst"; + reg = <0xe6160000 0x0200>; + }; diff --git a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml new file mode 100644 index 000000000..731b8ce01 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/renesas,rzg2l-usbphy-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/{G2L,V2L} USBPHY Control + +maintainers: + - Biju Das + +description: + The RZ/G2L USBPHY Control mainly controls reset and power down of the + USB/PHY. + +properties: + compatible: + items: + - enum: + - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL + - renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC} + - renesas,r9a07g054-usbphy-ctrl # RZ/V2L + - const: renesas,rzg2l-usbphy-ctrl + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + + '#reset-cells': + const: 1 + description: | + The phandle's argument in the reset specifier is the PHY reset associated + with the USB port. + 0 = Port 1 Phy reset + 1 = Port 2 Phy reset + +required: + - compatible + - reg + - clocks + - resets + - power-domains + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include + + phyrst: usbphy-ctrl@11c40000 { + compatible = "renesas,r9a07g044-usbphy-ctrl", + "renesas,rzg2l-usbphy-ctrl"; + reg = <0x11c40000 0x10000>; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>; + resets = <&cpg R9A07G044_USB_PRESETN>; + power-domains = <&cpg>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/reset.txt b/Documentation/devicetree/bindings/reset/reset.txt new file mode 100644 index 000000000..31db6ff84 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/reset.txt @@ -0,0 +1,75 @@ += Reset Signal Device Tree Bindings = + +This binding is intended to represent the hardware reset signals present +internally in most IC (SoC, FPGA, ...) designs. Reset signals for whole +standalone chips are most likely better represented as GPIOs, although there +are likely to be exceptions to this rule. + +Hardware blocks typically receive a reset signal. This signal is generated by +a reset provider (e.g. power management or clock module) and received by a +reset consumer (the module being reset, or a module managing when a sub- +ordinate module is reset). This binding exists to represent the provider and +consumer, and provide a way to couple the two together. + +A reset signal is represented by the phandle of the provider, plus a reset +specifier - a list of DT cells that represents the reset signal within the +provider. The length (number of cells) and semantics of the reset specifier +are dictated by the binding of the reset provider, although common schemes +are described below. + +A word on where to place reset signal consumers in device tree: It is possible +in hardware for a reset signal to affect multiple logically separate HW blocks +at once. In this case, it would be unwise to represent this reset signal in +the DT node of each affected HW block, since if activated, an unrelated block +may be reset. Instead, reset signals should be represented in the DT node +where it makes most sense to control it; this may be a bus node if all +children of the bus are affected by the reset signal, or an individual HW +block node for dedicated reset signals. The intent of this binding is to give +appropriate software access to the reset signals in order to manage the HW, +rather than to slavishly enumerate the reset signal that affects each HW +block. + += Reset providers = + +Required properties: +#reset-cells: Number of cells in a reset specifier; Typically 0 for nodes + with a single reset output and 1 for nodes with multiple + reset outputs. + +For example: + + rst: reset-controller { + #reset-cells = <1>; + }; + += Reset consumers = + +Required properties: +resets: List of phandle and reset specifier pairs, one pair + for each reset signal that affects the device, or that the + device manages. Note: if the reset provider specifies '0' for + #reset-cells, then only the phandle portion of the pair will + appear. + +Optional properties: +reset-names: List of reset signal name strings sorted in the same order as + the resets property. Consumers drivers will use reset-names to + match reset signal names with reset specifiers. + +For example: + + device { + resets = <&rst 20>; + reset-names = "reset"; + }; + +This represents a device with a single reset signal named "reset". + + bus { + resets = <&rst 10> <&rst 11> <&rst 12> <&rst 11>; + reset-names = "i2s1", "i2s2", "dma", "mixer"; + }; + +This represents a bus that controls the reset signal of each of four sub- +ordinate devices. Consider for example a bus that fails to operate unless no +child device has reset asserted. diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml new file mode 100644 index 000000000..a75db3d40 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/snps,axs10x-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AXS10x reset controller + +maintainers: + - Eugeniy Paltsev + +description: | + This binding describes the ARC AXS10x boards custom IP-block which allows + to control reset signals of selected peripherals. For example DW GMAC, etc... + This block is controlled via memory-mapped register (AKA CREG) which + represents up-to 32 reset lines. + As of today only the following lines are used: + - DW GMAC - line 5 + +properties: + compatible: + const: snps,axs10x-reset + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + reset: reset-controller@11220 { + compatible = "snps,axs10x-reset"; + #reset-cells = <1>; + reg = <0x11220 0x4>; + }; + + // Specifying reset lines connected to IP modules: + ethernet { + resets = <&reset 5>; + }; diff --git a/Documentation/devicetree/bindings/reset/snps,dw-reset.txt b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt new file mode 100644 index 000000000..0c241d4aa --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt @@ -0,0 +1,30 @@ +Synopsys DesignWare Reset controller +======================================= + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: + +- compatible: should be one of the following. + "snps,dw-high-reset" - for active high configuration + "snps,dw-low-reset" - for active low configuration + +- reg: physical base address of the controller and length of memory mapped + region. + +- #reset-cells: must be 1. + +example: + + dw_rst_1: reset-controller@0000 { + compatible = "snps,dw-high-reset"; + reg = <0x0000 0x4>; + #reset-cells = <1>; + }; + + dw_rst_2: reset-controller@1000 { + compatible = "snps,dw-low-reset"; + reg = <0x1000 0x8>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt new file mode 100644 index 000000000..830069b1c --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt @@ -0,0 +1,28 @@ +Binding for the Synopsys HSDK reset controller + +This binding uses the common reset binding[1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + +Required properties: +- compatible: should be "snps,hsdk-reset". +- reg: should always contain 2 pairs address - length: first for reset + configuration register and second for corresponding SW reset and status bits + register. +- #reset-cells: from common reset binding; Should always be set to 1. + +Example: + reset: reset@880 { + compatible = "snps,hsdk-reset"; + #reset-cells = <1>; + reg = <0x8A0 0x4>, <0xFF0 0x4>; + }; + +Specifying reset lines connected to IP modules: + ethernet@.... { + .... + resets = <&reset HSDK_V1_ETH_RESET>; + .... + }; + +The index could be found in diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml new file mode 100644 index 000000000..0a2c13e1e --- /dev/null +++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/socionext,uniphier-glue-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier peripheral core reset in glue layer + +description: | + Some peripheral core reset belongs to its own glue layer. Before using + this core reset, it is necessary to control the clocks and resets to + enable this layer. These clocks and resets should be described in each + property. + +maintainers: + - Kunihiko Hayashi + +properties: + compatible: + enum: + - socionext,uniphier-pro4-usb3-reset + - socionext,uniphier-pro5-usb3-reset + - socionext,uniphier-pxs2-usb3-reset + - socionext,uniphier-ld20-usb3-reset + - socionext,uniphier-pxs3-usb3-reset + - socionext,uniphier-nx1-usb3-reset + - socionext,uniphier-pro4-ahci-reset + - socionext,uniphier-pxs2-ahci-reset + - socionext,uniphier-pxs3-ahci-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: true + + resets: + minItems: 1 + maxItems: 2 + + reset-names: true + +allOf: + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pro4-usb3-reset + - socionext,uniphier-pro5-usb3-reset + - socionext,uniphier-pro4-ahci-reset + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: gio + - const: link + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: gio + - const: link + else: + properties: + clocks: + maxItems: 1 + clock-names: + const: link + resets: + maxItems: 1 + reset-names: + const: link + +additionalProperties: false + +required: + - compatible + - reg + - "#reset-cells" + - clocks + - clock-names + - resets + - reset-names + +examples: + - | + usb-glue@65b00000 { + compatible = "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_rst: reset@0 { + compatible = "socionext,uniphier-ld20-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + }; diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml new file mode 100644 index 000000000..6566804ec --- /dev/null +++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/socionext,uniphier-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier reset controller + +maintainers: + - Masahiro Yamada + +properties: + compatible: + oneOf: + - description: System reset + enum: + - socionext,uniphier-ld4-reset + - socionext,uniphier-pro4-reset + - socionext,uniphier-sld8-reset + - socionext,uniphier-pro5-reset + - socionext,uniphier-pxs2-reset + - socionext,uniphier-ld6b-reset + - socionext,uniphier-ld11-reset + - socionext,uniphier-ld20-reset + - socionext,uniphier-pxs3-reset + - socionext,uniphier-nx1-reset + - description: Media I/O (MIO) reset, SD reset + enum: + - socionext,uniphier-ld4-mio-reset + - socionext,uniphier-pro4-mio-reset + - socionext,uniphier-sld8-mio-reset + - socionext,uniphier-pro5-sd-reset + - socionext,uniphier-pxs2-sd-reset + - socionext,uniphier-ld11-mio-reset + - socionext,uniphier-ld11-sd-reset + - socionext,uniphier-ld20-sd-reset + - socionext,uniphier-pxs3-sd-reset + - socionext,uniphier-nx1-sd-reset + - description: Peripheral reset + enum: + - socionext,uniphier-ld4-peri-reset + - socionext,uniphier-pro4-peri-reset + - socionext,uniphier-sld8-peri-reset + - socionext,uniphier-pro5-peri-reset + - socionext,uniphier-pxs2-peri-reset + - socionext,uniphier-ld11-peri-reset + - socionext,uniphier-ld20-peri-reset + - socionext,uniphier-pxs3-peri-reset + - socionext,uniphier-nx1-peri-reset + - description: Analog signal amplifier reset + enum: + - socionext,uniphier-ld11-adamv-reset + - socionext,uniphier-ld20-adamv-reset + + "#reset-cells": + const: 1 + + resets: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - "#reset-cells" + +examples: + - | + sysctrl@61840000 { + compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon"; + reg = <0x61840000 0x4000>; + + reset { + compatible = "socionext,uniphier-ld11-reset"; + #reset-cells = <1>; + }; + + // other nodes ... + }; + + - | + mioctrl@59810000 { + compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; + + reset { + compatible = "socionext,uniphier-ld11-mio-reset"; + #reset-cells = <1>; + }; + + // other nodes ... + }; + + - | + perictrl@59820000 { + compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + reset { + compatible = "socionext,uniphier-ld11-peri-reset"; + #reset-cells = <1>; + }; + + // other nodes ... + }; + + - | + adamv@57920000 { + compatible = "socionext,uniphier-ld11-adamv", "simple-mfd", "syscon"; + reg = <0x57920000 0x1000>; + + reset { + compatible = "socionext,uniphier-ld11-adamv-reset"; + #reset-cells = <1>; + }; + + // other nodes ... + }; diff --git a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt new file mode 100644 index 000000000..3661e6153 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt @@ -0,0 +1,44 @@ +STMicroelectronics STi family Sysconfig Peripheral SoftReset Controller +============================================================================= + +This binding describes a reset controller device that is used to enable and +disable on-chip peripheral controllers such as USB and SATA, using +"softreset" control bits found in the STi family SoC system configuration +registers. + +The actual action taken when softreset is asserted is hardware dependent. +However, when asserted it may not be possible to access the hardware's +registers and after an assert/deassert sequence the hardware's previous state +may no longer be valid. + +Please refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: Should be "st,stih407-softreset"; +- #reset-cells: 1, see below + +example: + + softreset: softreset-controller { + #reset-cells = <1>; + compatible = "st,stih407-softreset"; + }; + + +Specifying softreset control of devices +======================================= + +Device nodes should specify the reset channel required in their "resets" +property, containing a phandle to the softreset device node and an +index specifying which channel to use, as described in reset.txt + +example: + + ethernet0{ + resets = <&softreset STIH415_ETH0_SOFTRESET>; + }; + +Macro definitions for the supported reset channels can be found in: + +include/dt-bindings/reset/stih407-resets.h diff --git a/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml b/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml new file mode 100644 index 000000000..329ae4ae1 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/st,stih407-picophyreset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi family Sysconfig Picophy SoftReset Controller + +maintainers: + - Peter Griffin + +description: | + This binding describes a reset controller device that is used to enable and + disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in + the STi family SoC system configuration registers. + + The actual action taken when softreset is asserted is hardware dependent. + However, when asserted it may not be possible to access the hardware's + registers and after an assert/deassert sequence the hardware's previous state + may no longer be valid. + +properties: + compatible: + const: st,stih407-picophyreset + + '#reset-cells': + const: 1 + +required: + - compatible + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include + + picophyreset: picophyreset-controller { + compatible = "st,stih407-picophyreset"; + #reset-cells = <1>; + }; + + // Specifying picophyreset control of devices + usb2_picophy0: usbpicophy { + resets = <&picophyreset STIH407_PICOPHY0_RESET>; + }; diff --git a/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml b/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml new file mode 100644 index 000000000..d3790e602 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/st,stih407-powerdown.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller + +maintainers: + - Srinivas Kandagatla + +description: | + This binding describes a reset controller device that is used to enable and + disable on-chip peripheral controllers such as USB and SATA, using + "powerdown" control bits found in the STi family SoC system configuration + registers. These have been grouped together into a single reset controller + device for convenience. + + The actual action taken when powerdown is asserted is hardware dependent. + However, when asserted it may not be possible to access the hardware's + registers and after an assert/deassert sequence the hardware's previous state + may no longer be valid. + +properties: + compatible: + const: st,stih407-powerdown + + '#reset-cells': + const: 1 + +required: + - compatible + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include + + powerdown: powerdown-controller { + compatible = "st,stih407-powerdown"; + #reset-cells = <1>; + }; + + // Specifying powerdown control of devices: + st_dwc3: dwc3 { + resets = <&powerdown STIH407_USB3_POWERDOWN>; + }; diff --git a/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt new file mode 100644 index 000000000..01db34375 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt @@ -0,0 +1,6 @@ +STMicroelectronics STM32 Peripheral Reset Controller +==================================================== + +The RCC IP is both a reset and a clock controller. + +Please see Documentation/devicetree/bindings/clock/st,stm32-rcc.txt diff --git a/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt new file mode 100644 index 000000000..2880d5dda --- /dev/null +++ b/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt @@ -0,0 +1,6 @@ +STMicroelectronics STM32MP1 Peripheral Reset Controller +======================================================= + +The RCC IP is both a reset and a clock controller. + +Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml diff --git a/Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml b/Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml new file mode 100644 index 000000000..2f5bd616b --- /dev/null +++ b/Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/starfive,jh7100-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7100 SoC Reset Controller + +maintainers: + - Emil Renner Berthing + +properties: + compatible: + enum: + - starfive,jh7100-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + reset-controller@11840000 { + compatible = "starfive,jh7100-reset"; + reg = <0x11840000 0x10000>; + #reset-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/reset/sunplus,reset.yaml b/Documentation/devicetree/bindings/reset/sunplus,reset.yaml new file mode 100644 index 000000000..f24646ba9 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/sunplus,reset.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/sunplus,reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Sunplus SoC Reset Controller + +maintainers: + - Qin Jian + +properties: + compatible: + const: sunplus,sp7021-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + rstc: reset@9c000054 { + compatible = "sunplus,sp7021-reset"; + reg = <0x9c000054 0x28>; + #reset-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml new file mode 100644 index 000000000..4639d2cec --- /dev/null +++ b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/ti,sci-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI-SCI reset controller node bindings + +maintainers: + - Nishanth Menon + +description: | + Some TI SoCs contain a system controller (like the Power Management Micro + Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling + the state of the various hardware modules present on the SoC. Communication + between the host processor running an OS and the system controller happens + through a protocol called TI System Control Interface (TI-SCI protocol). + + This reset controller node uses the TI SCI protocol to perform the reset + management of various hardware modules present on the SoC. Must be a child + node of the associated TI-SCI system controller node. + +properties: + $nodename: + pattern: "^reset-controller$" + + compatible: + const: ti,sci-reset + + "#reset-cells": + const: 2 + description: + The two cells represent values that the TI-SCI controller defines. + + The first cell should contain the device ID. + + The second cell should contain the reset mask corresponding to the device + used by system controller. + + Please see http://processors.wiki.ti.com/index.php/TISCI for + protocol documentation for the values to be used for different devices. + + +additionalProperties: false + +examples: + - | + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml new file mode 100644 index 000000000..afc835eda --- /dev/null +++ b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/ti,tps380x-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS380x reset controller node bindings + +maintainers: + - Marco Felsch + +description: | + The TPS380x family [1] of supervisory circuits monitor supply voltages to + provide circuit initialization and timing supervision. The devices assert a + RESET signal if the voltage drops below a preset threshold or upon a manual + reset input (MR). The RESET output remains asserted for the factory + programmed delay after the voltage return above its threshold or after the + manual reset input is released. + + [1] https://www.ti.com/product/TPS3801 + +properties: + compatible: + enum: + - ti,tps3801 + + reset-gpios: + maxItems: 1 + description: Reference to the GPIO connected to the MR pin. + + "#reset-cells": + const: 0 + +required: + - compatible + - reset-gpios + - "#reset-cells" + +additionalProperties: false + +examples: + - | + #include + reset: reset-controller { + compatible = "ti,tps3801"; + #reset-cells = <0>; + reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; + }; +... diff --git a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt new file mode 100644 index 000000000..86945502c --- /dev/null +++ b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt @@ -0,0 +1,91 @@ +TI SysCon Reset Controller +======================= + +Almost all SoCs have hardware modules that require reset control in addition +to clock and power control for their functionality. The reset control is +typically provided by means of memory-mapped I/O registers. These registers are +sometimes a part of a larger register space region implementing various +functionalities. This register range is best represented as a syscon node to +allow multiple entities to access their relevant registers in the common +register space. + +A SysCon Reset Controller node defines a device that uses a syscon node +and provides reset management functionality for various hardware modules +present on the SoC. + +SysCon Reset Controller Node +============================ +Each of the reset provider/controller nodes should be a child of a syscon +node and have the following properties. + +Required properties: +-------------------- + - compatible : Should be, + "ti,k2e-pscrst" + "ti,k2l-pscrst" + "ti,k2hk-pscrst" + "ti,syscon-reset" + - #reset-cells : Should be 1. Please see the reset consumer node below + for usage details + - ti,reset-bits : Contains the reset control register information + Should contain 7 cells for each reset exposed to + consumers, defined as: + Cell #1 : offset of the reset assert control + register from the syscon register base + Cell #2 : bit position of the reset in the reset + assert control register + Cell #3 : offset of the reset deassert control + register from the syscon register base + Cell #4 : bit position of the reset in the reset + deassert control register + Cell #5 : offset of the reset status register + from the syscon register base + Cell #6 : bit position of the reset in the + reset status register + Cell #7 : Flags used to control reset behavior, + availible flags defined in the DT include + file + +SysCon Reset Consumer Nodes +=========================== +Each of the reset consumer nodes should have the following properties, +in addition to their own properties. + +Required properties: +-------------------- + - resets : A phandle to the reset controller node and an index number + to a reset specifier as defined above. + +Please also refer to Documentation/devicetree/bindings/reset/reset.txt for +common reset controller usage by consumers. + +Example: +-------- +The following example demonstrates a syscon node, the reset controller node +using the syscon node, and a consumer (a DSP device) on the TI Keystone 2 +66AK2E SoC. + +/ { + soc { + psc: power-sleep-controller@2350000 { + compatible = "syscon", "simple-mfd"; + reg = <0x02350000 0x1000>; + + pscrst: reset-controller { + compatible = "ti,k2e-pscrst", "ti,syscon-reset"; + #reset-cells = <1>; + + ti,reset-bits = < + 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */ + 0xa40 5 0xa44 3 0 0 (ASSERT_SET | DEASSERT_CLEAR | STATUS_NONE) /* 1: example */ + >; + }; + }; + + dsp0: dsp0 { + ... + resets = <&pscrst 0>; + ... + }; + }; +}; diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt new file mode 100644 index 000000000..ed836868d --- /dev/null +++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt @@ -0,0 +1,55 @@ +-------------------------------------------------------------------------- + = Zynq UltraScale+ MPSoC and Versal reset driver binding = +-------------------------------------------------------------------------- +The Zynq UltraScale+ MPSoC and Versal has several different resets. + +See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information +about zynqmp resets. + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required Properties: +- compatible: "xlnx,zynqmp-reset" for Zynq UltraScale+ MPSoC platform + "xlnx,versal-reset" for Versal platform +- #reset-cells: Specifies the number of cells needed to encode reset + line, should be 1 + +------- +Example +------- + +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + zynqmp_reset: reset-controller { + compatible = "xlnx,zynqmp-reset"; + #reset-cells = <1>; + }; + }; +}; + +Specifying reset lines connected to IP modules +============================================== + +Device nodes that need access to reset lines should +specify them as a reset phandle in their corresponding node as +specified in reset.txt. + +For list of all valid reset indices for Zynq UltraScale+ MPSoC see + +For list of all valid reset indices for Versal see + + +Example: + +serdes: zynqmp_phy@fd400000 { + ... + + resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; + reset-names = "sata_rst"; + + ... +}; diff --git a/Documentation/devicetree/bindings/reset/zynq-reset.txt b/Documentation/devicetree/bindings/reset/zynq-reset.txt new file mode 100644 index 000000000..5860120e3 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/zynq-reset.txt @@ -0,0 +1,68 @@ +Xilinx Zynq Reset Manager + +The Zynq AP-SoC has several different resets. + +See Chapter 26 of the Zynq TRM (UG585) for more information about Zynq resets. + +Required properties: +- compatible: "xlnx,zynq-reset" +- reg: SLCR offset and size taken via syscon <0x200 0x48> +- syscon: <&slcr> + This should be a phandle to the Zynq's SLCR registers. +- #reset-cells: Must be 1 + +The Zynq Reset Manager needs to be a childnode of the SLCR. + +Example: + rstc: rstc@200 { + compatible = "xlnx,zynq-reset"; + reg = <0x200 0x48>; + #reset-cells = <1>; + syscon = <&slcr>; + }; + +Reset outputs: + 0 : soft reset + 32 : ddr reset + 64 : topsw reset + 96 : dmac reset + 128: usb0 reset + 129: usb1 reset + 160: gem0 reset + 161: gem1 reset + 164: gem0 rx reset + 165: gem1 rx reset + 166: gem0 ref reset + 167: gem1 ref reset + 192: sdio0 reset + 193: sdio1 reset + 196: sdio0 ref reset + 197: sdio1 ref reset + 224: spi0 reset + 225: spi1 reset + 226: spi0 ref reset + 227: spi1 ref reset + 256: can0 reset + 257: can1 reset + 258: can0 ref reset + 259: can1 ref reset + 288: i2c0 reset + 289: i2c1 reset + 320: uart0 reset + 321: uart1 reset + 322: uart0 ref reset + 323: uart1 ref reset + 352: gpio reset + 384: lqspi reset + 385: qspi ref reset + 416: smc reset + 417: smc ref reset + 448: ocm reset + 512: fpga0 out reset + 513: fpga1 out reset + 514: fpga2 out reset + 515: fpga3 out reset + 544: a9 reset 0 + 545: a9 reset 1 + 552: peri reset + -- cgit v1.2.3