From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../devicetree/bindings/usb/ti,usb8041.yaml | 67 ++++++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ti,usb8041.yaml (limited to 'Documentation/devicetree/bindings/usb/ti,usb8041.yaml') diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml new file mode 100644 index 000000000..e04fbd8ab --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,usb8041.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for the TI USB8041 USB 3.0 hub controller + +maintainers: + - Alexander Stein + +allOf: + - $ref: usb-device.yaml# + +properties: + compatible: + enum: + - usb451,8140 + - usb451,8142 + + reg: true + + reset-gpios: + items: + - description: GPIO specifier for GRST# pin. + + vdd-supply: + description: + VDD power supply to the hub + + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + +required: + - compatible + - reg + - peer-hub + +additionalProperties: false + +examples: + - | + #include + + usb { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb451,8142"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb451,8140"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + }; -- cgit v1.2.3