From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../devicetree/bindings/watchdog/st_lpc_wdt.txt | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt (limited to 'Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt') diff --git a/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt new file mode 100644 index 000000000..b949039bc --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt @@ -0,0 +1,41 @@ +STMicroelectronics Low Power Controller (LPC) - Watchdog +======================================================== + +LPC currently supports Watchdog OR Real Time Clock OR Clocksource +functionality. + +[See: ../rtc/rtc-st-lpc.txt for RTC options] +[See: ../timer/st,stih407-lpc for Clocksource options] + +Required properties + +- compatible : Should be: "st,stih407-lpc" +- reg : LPC registers base address + size +- interrupts : LPC interrupt line number and associated flags +- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt) +- st,lpc-mode : The LPC can run either one of three modes: + ST_LPC_MODE_RTC [0] + ST_LPC_MODE_WDT [1] + ST_LPC_MODE_CLKSRC [2] + One (and only one) mode must be selected. + +Required properties [watchdog mode] + +- st,syscfg : Phandle to syscfg node used to enable watchdog and configure + CPU reset type. +- timeout-sec : Watchdog timeout in seconds + +Optional properties [watchdog mode] + +- st,warm-reset : If present reset type will be 'warm' - if not it will be cold + +Example: + lpc@fde05000 { + compatible = "st,stih407-lpc"; + reg = <0xfde05000 0x1000>; + clocks = <&clk_s_d3_flexgen CLK_LPC_0>; + st,syscfg = <&syscfg_core>; + timeout-sec = <120>; + st,lpc-mode = ; + st,warm-reset; + }; -- cgit v1.2.3