From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- Documentation/misc-devices/isl29003.rst | 75 +++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) create mode 100644 Documentation/misc-devices/isl29003.rst (limited to 'Documentation/misc-devices/isl29003.rst') diff --git a/Documentation/misc-devices/isl29003.rst b/Documentation/misc-devices/isl29003.rst new file mode 100644 index 000000000..0cc38aed6 --- /dev/null +++ b/Documentation/misc-devices/isl29003.rst @@ -0,0 +1,75 @@ +====================== +Kernel driver isl29003 +====================== + +Supported chips: + +* Intersil ISL29003 + +Prefix: 'isl29003' + +Addresses scanned: none + +Datasheet: +http://www.intersil.com/data/fn/fn7464.pdf + +Author: Daniel Mack + + +Description +----------- +The ISL29003 is an integrated light sensor with a 16-bit integrating type +ADC, I2C user programmable lux range select for optimized counts/lux, and +I2C multi-function control and monitoring capabilities. The internal ADC +provides 16-bit resolution while rejecting 50Hz and 60Hz flicker caused by +artificial light sources. + +The driver allows to set the lux range, the bit resolution, the operational +mode (see below) and the power state of device and can read the current lux +value, of course. + + +Detection +--------- + +The ISL29003 does not have an ID register which could be used to identify +it, so the detection routine will just try to read from the configured I2C +address and consider the device to be present as soon as it ACKs the +transfer. + + +Sysfs entries +------------- + +range: + == =========================== + 0: 0 lux to 1000 lux (default) + 1: 0 lux to 4000 lux + 2: 0 lux to 16,000 lux + 3: 0 lux to 64,000 lux + == =========================== + +resolution: + == ===================== + 0: 2^16 cycles (default) + 1: 2^12 cycles + 2: 2^8 cycles + 3: 2^4 cycles + == ===================== + +mode: + == ================================================= + 0: diode1's current (unsigned 16bit) (default) + 1: diode1's current (unsigned 16bit) + 2: difference between diodes (l1 - l2, signed 15bit) + == ================================================= + +power_state: + == ================================================= + 0: device is disabled (default) + 1: device is enabled + == ================================================= + +lux (read only): + returns the value from the last sensor reading + -- cgit v1.2.3