From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- arch/arm/boot/dts/mba6ulx.dtsi | 569 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 569 insertions(+) create mode 100644 arch/arm/boot/dts/mba6ulx.dtsi (limited to 'arch/arm/boot/dts/mba6ulx.dtsi') diff --git a/arch/arm/boot/dts/mba6ulx.dtsi b/arch/arm/boot/dts/mba6ulx.dtsi new file mode 100644 index 000000000..aac42df9e --- /dev/null +++ b/arch/arm/boot/dts/mba6ulx.dtsi @@ -0,0 +1,569 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel + */ + +/ { + model = "TQ-Systems MBA6ULx Baseboard"; + + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc1; + rtc0 = &rtc0; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <®_mba6ul_3v3>; + enable-gpios = <&expander_out0 4 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + beeper: beeper { + compatible = "gpio-beeper"; + gpios = <&expander_out1 6 GPIO_ACTIVE_HIGH>; + }; + + gpio_buttons: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_buttons>; + + button1 { + label = "s14"; + linux,code = ; + gpios = <&expander_in0 0 GPIO_ACTIVE_LOW>; + }; + + button2 { + label = "s6"; + linux,code = ; + gpios = <&expander_in0 1 GPIO_ACTIVE_LOW>; + }; + + button3 { + label = "s7"; + linux,code = ; + gpios = <&expander_in0 2 GPIO_ACTIVE_LOW>; + }; + + power-button { + label = "POWER"; + linux,code = ; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + status = "okay"; + + led1 { + label = "led1"; + gpios = <&expander_out1 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led2 { + label = "led2"; + gpios = <&expander_out1 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_lcd_pwr: regulator-lcd-pwr { + compatible = "regulator-fixed"; + regulator-name = "lcd-pwr"; + gpio = <&expander_out0 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_mba6ul_3v3: regulator-mba6ul-3v3 { + compatible = "regulator-fixed"; + regulator-name = "supply-mba6ul-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_mba6ul_5v0: regulator-mba6ul-5v0 { + compatible = "regulator-fixed"; + regulator-name = "supply-mba6ul-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_mpcie: regulator-mpcie-3v3 { + compatible = "regulator-fixed"; + regulator-name = "mpcie-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander_out0 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + startup-delay-us = <500000>; + vin-supply = <®_mba6ul_3v3>; + }; + + reg_otg2vbus_5v0: regulator-otg2-vbus-5v0 { + compatible = "regulator-fixed"; + gpio = <&expander_out1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "otg2-vbus-supply-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_mpcie>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x6000000>; + linux,cma-default; + }; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "imx-audio-tlv320aic32x4"; + ssi-controller = <&sai1>; + audio-codec = <&tlv320aic32x4>; + audio-asrc = <&asrc>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_mba6ul_3v3>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_mba6ul_3v3>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <768000000>; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-cs = <1>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + phy-supply = <®_mba6ul_3v3>; + phy-reset-gpios = <&expander_out1 1 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-reset-post-delay = <1>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_mdc>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + phy-supply = <®_mba6ul_3v3>; + phy-reset-gpios = <&expander_out1 2 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-reset-post-delay = <1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + reg = <0>; + max-speed = <100>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>; + reg = <1>; + max-speed = <100>; + }; + }; +}; + +&i2c4 { + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&clks IMX6UL_CLK_SAI1>; + clock-names = "mclk"; + ldoin-supply = <®_mba6ul_3v3>; + iov-supply = <®_mba6ul_3v3>; + }; + + jc42: temperature-sensor@19 { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x19>; + }; + + expander_out0: gpio-expander@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + expander_in0: gpio-expander@21 { + compatible = "nxp,pca9554"; + reg = <0x21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_expander_in0>; + interrupt-parent = <&gpio4>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + enet1_int-hog { + gpio-hog; + gpios = <6 0>; + input; + }; + + enet2_int-hog { + gpio-hog; + gpios = <7 0>; + input; + }; + }; + + expander_out1: gpio-expander@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + analog_touch: touchscreen@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio4>; + interrupt-controller; + status = "disabled"; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */ + st,ave-ctrl = <3>; /* 8 sample average control */ + st,fraction-z = <7>; /* 7 length fractional part in z */ + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + st,mod-12b = <1>; /* 12-bit ADC */ + st,ref-sel = <0>; /* internal ADC reference */ + st,sample-time = <4>; /* ADC converstion time: 80 clocks */ + st,settling = <3>; /* 1 ms panel driver settling time */ + st,touch-det-delay = <5>; /* 5 ms touch detect interrupt delay */ + }; + }; + + /* NXP SE97BTP with temperature sensor + eeprom */ + se97b: eeprom@51 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>, + <&clks IMX6UL_CLK_SAI1>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <24000000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + /* for DTE mode, add below change */ + /* fsl,dte-mode; */ + /* pinctrl-0 = <&pinctrl_uart6dte>; */ + uart-has-rtscts; + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; + status = "okay"; +}; + +/* otg-port */ +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + power-active-high; + over-current-active-low; + /* we implement only dual role but not a fully featured OTG */ + hnp-disable; + srp-disable; + adp-disable; + dr_mode = "otg"; + status = "okay"; +}; + +/* 7-port usb hub */ +/* id, pwr, oc pins not connected */ +&usbotg2 { + disable-over-current; + vbus-supply = <®_otg2vbus_5v0>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + vmmc-supply = <®_mba6ul_3v3>; + vqmmc-supply = <®_vccsd>; + no-1-8-v; + no-mmc; + no-sdio; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_buttons: buttonsgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x100b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x1b020 + MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x1b020 + MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x1b020 + MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x1b020 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b0a8 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0a0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0a0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b0a8 + >; + }; + + pinctrl_enet2_mdc: enet2mdcgrp { + fsl,pins = < + /* mdio */ + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_expander_in0: expanderin0grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x1b0b1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + /* 100 k PD, DSE 120 OHM, SPPEED LO */ + MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x00003050 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b1 + MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b1 + MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8 + MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0 + MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1 + MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1 + MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x1b0b1 + MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_uart6dte: uart6dte { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x1b0b1 + MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x1b0b1 + MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS 0x1b0b1 + MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x00017059 + MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0001b0b0 + MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x0001b099 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x00017059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x00017059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x00017059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x00017059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x00017059 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170b9 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170f9 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_wdog1: wdog1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0001b099 + >; + }; +}; -- cgit v1.2.3