From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 445 ++++++++++++++++++++++++++++++++ 1 file changed, 445 insertions(+) create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7.dts (limited to 'arch/arm/boot/dts/r8a7742-iwg21d-q7.dts') diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts new file mode 100644 index 000000000..64102b664 --- /dev/null +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -0,0 +1,445 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the iWave-RZ/G1H Qseven board + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/* + * SSI-SGTL5000 + * + * This command is required when Playback/Capture + * + * amixer set "DVC Out" 100% + * amixer set "DVC In" 100% + * + * You can use Mute + * + * amixer set "DVC Out Mute" on + * amixer set "DVC In Mute" on + * + * You can use Volume Ramp + * + * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" + * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" + * amixer set "DVC Out Ramp" on + * aplay xxx.wav & + * amixer set "DVC Out" 80% // Volume Down + * amixer set "DVC Out" 100% // Volume Up + */ + +/dts-v1/; +#include "r8a7742-iwg21m.dtsi" +#include + +/ { + model = "iWave Systems RainboW-G21D-Qseven board based on RZ/G1H"; + compatible = "iwave,g21d", "iwave,g21m", "renesas,r8a7742"; + + aliases { + serial2 = &scifa2; + serial4 = &scifb2; + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel root=/dev/mmcblk0p1 rw rootwait"; + stdout-path = "serial2:115200n8"; + }; + + audio_clock: audio_clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + lcd_backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&tpu 2 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + pinctrl-0 = <&backlight_pins>; + pinctrl-names = "default"; + default-brightness-level = <7>; + enable-gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + + sdhi2_led { + label = "sdio-led"; + gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + }; + }; + + lvds-receiver { + compatible = "ti,ds90cf384a", "lvds-decoder"; + power-supply = <&vcc_3v3_tft1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds_receiver_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + port@1 { + reg = <1>; + lvds_receiver_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + + panel { + compatible = "edt,etm0700g0dh6"; + backlight = <&lcd_backlight>; + power-supply = <&vcc_3v3_tft1>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_receiver_out>; + }; + }; + }; + + reg_1p5v: 1p5v { + compatible = "regulator-fixed"; + regulator-name = "1P5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + rsnd_sgtl5000: sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + }; + + vcc_3v3_tft1: regulator-panel { + compatible = "regulator-fixed"; + + regulator-name = "vcc-3v3-tft1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + startup-delay-us = <500>; + gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>; + }; + + vcc_sdhi2: regulator-vcc-sdhi2 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio1 27 GPIO_ACTIVE_LOW>; + }; + + vccq_sdhi2: regulator-vccq-sdhi2 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI2 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy3>; + phy-mode = "gmii"; + renesas,no-ether-link; + status = "okay"; + + phy3: ethernet-phy@3 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + reg = <3>; + micrel,led-mode = <1>; + }; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + #sound-dai-cells = <0>; + reg = <0x0a>; + clocks = <&audio_clock>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + VDDD-supply = <®_1p5v>; + }; + + touch: touchpanel@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + /* GP1_29 is also shared with audio codec reset pin */ + reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + vcc-supply = <&vcc_3v3_tft1>; + }; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&cmt0 { + status = "okay"; +}; + +&du { + status = "okay"; +}; + +&gpio0 { + touch-interrupt-hog { + gpio-hog; + gpios = <24 GPIO_ACTIVE_LOW>; + input; + }; +}; + +&gpio1 { + can-trx-en-hog { + gpio-hog; + gpios = <28 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "can-trx-en-gpio"; + }; +}; + +&hsusb { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&lvds0 { + status = "okay"; + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&lvds_receiver_in>; + }; + }; + }; +}; + +&msiof0 { + pinctrl-0 = <&msiof0_pins>; + pinctrl-names = "default"; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + + status = "okay"; + + flash1: flash@0 { + compatible = "sst,sst25vf016b", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "user"; + reg = <0x00000000 0x00200000>; + }; + }; + }; +}; + +&pci0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + /* Disable hsusb to enable USB2.0 host mode support on J2 */ + /* status = "okay"; */ +}; + +&pci1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pci2 { + /* Disable xhci to enable USB2.0 host mode support on J23 bottom port */ + /* status = "okay"; */ +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pciec { + /* SW2[6] determines which connector is activated + * ON = PCIe X4 (connector-J7) + * OFF = mini-PCIe (connector-J26) + */ + status = "okay"; +}; + +&pfc { + avb_pins: avb { + groups = "avb_mdio", "avb_gmii"; + function = "avb"; + }; + + backlight_pins: backlight { + groups = "tpu0_to2"; + function = "tpu0"; + }; + + can1_pins: can1 { + groups = "can1_data_b"; + function = "can1"; + }; + + i2c2_pins: i2c2 { + groups = "i2c2_b"; + function = "i2c2"; + }; + + msiof0_pins: msiof0 { + groups = "msiof0_clk", "msiof0_sync", "msiof0_tx", "msiof0_rx"; + function = "msiof0"; + }; + + scifa2_pins: scifa2 { + groups = "scifa2_data_c"; + function = "scifa2"; + }; + + scifb2_pins: scifb2 { + groups = "scifb2_data", "scifb2_ctrl"; + function = "scifb2"; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + + sound_pins: sound { + groups = "ssi34_ctrl", "ssi3_data", "ssi4_data"; + function = "ssi"; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + groups = "usb1_pwen"; + function = "usb1"; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + rcar_sound,dai { + dai0 { + playback = <&ssi4>, <&src4>, <&dvc1>; + capture = <&ssi3>, <&src3>, <&dvc0>; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scifa2 { + pinctrl-0 = <&scifa2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scifb2 { + pinctrl-0 = <&scifb2_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi2>; + vqmmc-supply = <&vccq_sdhi2>; + cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + sd-uhs-sdr50; + status = "okay"; +}; + +&ssi4 { + shared-pin; +}; + +&tpu { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; -- cgit v1.2.3