From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- arch/mips/include/asm/sgi/heart.h | 323 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 323 insertions(+) create mode 100644 arch/mips/include/asm/sgi/heart.h (limited to 'arch/mips/include/asm/sgi/heart.h') diff --git a/arch/mips/include/asm/sgi/heart.h b/arch/mips/include/asm/sgi/heart.h new file mode 100644 index 000000000..0d0375195 --- /dev/null +++ b/arch/mips/include/asm/sgi/heart.h @@ -0,0 +1,323 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * HEART chip definitions + * + * Copyright (C) 2004-2007 Stanislaw Skowronek + * 2009 Johannes Dickgreber + * 2007-2015 Joshua Kinard + */ +#ifndef __ASM_SGI_HEART_H +#define __ASM_SGI_HEART_H + +#include +#include + +/* + * There are 8 DIMM slots on an IP30 system + * board, which are grouped into four banks + */ +#define HEART_MEMORY_BANKS 4 + +/* HEART can support up to four CPUs */ +#define HEART_MAX_CPUS 4 + +#define HEART_XKPHYS_BASE ((void *)(IO_BASE | 0x000000000ff00000ULL)) + +/** + * struct ip30_heart_regs - struct that maps IP30 HEART registers. + * @mode: HEART_MODE - Purpose Unknown, machine reset called from here. + * @sdram_mode: HEART_SDRAM_MODE - purpose unknown. + * @mem_refresh: HEART_MEM_REF - purpose unknown. + * @mem_req_arb: HEART_MEM_REQ_ARB - purpose unknown. + * @mem_cfg.q: union for 64bit access to HEART_MEMCFG - 4x 64bit registers. + * @mem_cfg.l: union for 32bit access to HEART_MEMCFG - 8x 32bit registers. + * @fc_mode: HEART_FC_MODE - Purpose Unknown, possibly for GFX flow control. + * @fc_timer_limit: HEART_FC_TIMER_LIMIT - purpose unknown. + * @fc_addr: HEART_FC0_ADDR, HEART_FC1_ADDR - purpose unknown. + * @fc_credit_cnt: HEART_FC0_CR_CNT, HEART_FC1_CR_CNT - purpose unknown. + * @fc_timer: HEART_FC0_TIMER, HEART_FC1_TIMER - purpose unknown. + * @status: HEART_STATUS - HEART status information. + * @bus_err_addr: HEART_BERR_ADDR - likely contains addr of recent SIGBUS. + * @bus_err_misc: HEART_BERR_MISC - purpose unknown. + * @mem_err_addr: HEART_MEMERR_ADDR - likely contains addr of recent mem err. + * @mem_err_data: HEART_MEMERR_DATA - purpose unknown. + * @piur_acc_err: HEART_PIUR_ACC_ERR - likely for access err to HEART regs. + * @mlan_clock_div: HEART_MLAN_CLK_DIV - MicroLAN clock divider. + * @mlan_ctrl: HEART_MLAN_CTL - MicroLAN control. + * @__pad0: 0x0f40 bytes of padding -> next HEART register 0x01000. + * @undefined: Undefined/diag register, write to it triggers PIUR_ACC_ERR. + * @__pad1: 0xeff8 bytes of padding -> next HEART register 0x10000. + * @imr: HEART_IMR0 to HEART_IMR3 - per-cpu interrupt mask register. + * @set_isr: HEART_SET_ISR - set interrupt status register. + * @clear_isr: HEART_CLR_ISR - clear interrupt status register. + * @isr: HEART_ISR - interrupt status register (read-only). + * @imsr: HEART_IMSR - purpose unknown. + * @cause: HEART_CAUSE - HEART cause information. + * @__pad2: 0xffb8 bytes of padding -> next HEART register 0x20000. + * @count: HEART_COUNT - 52-bit counter. + * @__pad3: 0xfff8 bytes of padding -> next HEART register 0x30000. + * @compare: HEART_COMPARE - 24-bit compare. + * @__pad4: 0xfff8 bytes of padding -> next HEART register 0x40000. + * @trigger: HEART_TRIGGER - purpose unknown. + * @__pad5: 0xfff8 bytes of padding -> next HEART register 0x50000. + * @cpuid: HEART_PRID - contains CPU ID of CPU currently accessing HEART. + * @__pad6: 0xfff8 bytes of padding -> next HEART register 0x60000. + * @sync: HEART_SYNC - purpose unknown. + * + * HEART is the main system controller ASIC for IP30 system. It incorporates + * a memory controller, interrupt status/cause/set/clear management, basic + * timer with count/compare, and other functionality. For Linux, not all of + * HEART's functions are fully understood. + * + * Implementation note: All HEART registers are 64bits-wide, but the mem_cfg + * register only reports correct values if queried in 32bits. Hence the need + * for a union. Even though mem_cfg.l has 8 array slots, we only ever query + * up to 4 of those. IP30 has 8 DIMM slots arranged into 4 banks, w/ 2 DIMMs + * per bank. Each 32bit read accesses one of these banks. Perhaps HEART was + * designed to address up to 8 banks (16 DIMMs)? We may never know. + */ +struct ip30_heart_regs { /* 0x0ff00000 */ + u64 mode; /* + 0x00000 */ + /* Memory */ + u64 sdram_mode; /* + 0x00008 */ + u64 mem_refresh; /* + 0x00010 */ + u64 mem_req_arb; /* + 0x00018 */ + union { + u64 q[HEART_MEMORY_BANKS]; /* readq() */ + u32 l[HEART_MEMORY_BANKS * 2]; /* readl() */ + } mem_cfg; /* + 0x00020 */ + /* Flow control (gfx?) */ + u64 fc_mode; /* + 0x00040 */ + u64 fc_timer_limit; /* + 0x00048 */ + u64 fc_addr[2]; /* + 0x00050 */ + u64 fc_credit_cnt[2]; /* + 0x00060 */ + u64 fc_timer[2]; /* + 0x00070 */ + /* Status */ + u64 status; /* + 0x00080 */ + /* Bus error */ + u64 bus_err_addr; /* + 0x00088 */ + u64 bus_err_misc; /* + 0x00090 */ + /* Memory error */ + u64 mem_err_addr; /* + 0x00098 */ + u64 mem_err_data; /* + 0x000a0 */ + /* Misc */ + u64 piur_acc_err; /* + 0x000a8 */ + u64 mlan_clock_div; /* + 0x000b0 */ + u64 mlan_ctrl; /* + 0x000b8 */ + u64 __pad0[0x01e8]; /* + 0x000c0 + 0x0f40 */ + /* Undefined */ + u64 undefined; /* + 0x01000 */ + u64 __pad1[0x1dff]; /* + 0x01008 + 0xeff8 */ + /* Interrupts */ + u64 imr[HEART_MAX_CPUS]; /* + 0x10000 */ + u64 set_isr; /* + 0x10020 */ + u64 clear_isr; /* + 0x10028 */ + u64 isr; /* + 0x10030 */ + u64 imsr; /* + 0x10038 */ + u64 cause; /* + 0x10040 */ + u64 __pad2[0x1ff7]; /* + 0x10048 + 0xffb8 */ + /* Timer */ + u64 count; /* + 0x20000 */ + u64 __pad3[0x1fff]; /* + 0x20008 + 0xfff8 */ + u64 compare; /* + 0x30000 */ + u64 __pad4[0x1fff]; /* + 0x30008 + 0xfff8 */ + u64 trigger; /* + 0x40000 */ + u64 __pad5[0x1fff]; /* + 0x40008 + 0xfff8 */ + /* Misc */ + u64 cpuid; /* + 0x50000 */ + u64 __pad6[0x1fff]; /* + 0x50008 + 0xfff8 */ + u64 sync; /* + 0x60000 */ +}; + + +/* For timer-related bits. */ +#define HEART_NS_PER_CYCLE 80 +#define HEART_CYCLES_PER_SEC (NSEC_PER_SEC / HEART_NS_PER_CYCLE) + + +/* + * XXX: Everything below this comment will either go away or be cleaned + * up to fit in better with Linux. A lot of the bit definitions for + * HEART were derived from IRIX's sys/RACER/heart.h header file. + */ + +/* HEART Masks */ +#define HEART_ATK_MASK 0x0007ffffffffffff /* HEART attack mask */ +#define HEART_ACK_ALL_MASK 0xffffffffffffffff /* Ack everything */ +#define HEART_CLR_ALL_MASK 0x0000000000000000 /* Clear all */ +#define HEART_BR_ERR_MASK 0x7ff8000000000000 /* BRIDGE error mask */ +#define HEART_CPU0_ERR_MASK 0x8ff8000000000000 /* CPU0 error mask */ +#define HEART_CPU1_ERR_MASK 0x97f8000000000000 /* CPU1 error mask */ +#define HEART_CPU2_ERR_MASK 0xa7f8000000000000 /* CPU2 error mask */ +#define HEART_CPU3_ERR_MASK 0xc7f8000000000000 /* CPU3 error mask */ +#define HEART_ERR_MASK 0x1ff /* HEART error mask */ +#define HEART_ERR_MASK_START 51 /* HEART error start */ +#define HEART_ERR_MASK_END 63 /* HEART error end */ + +/* Bits in the HEART_MODE register. */ +#define HM_PROC_DISABLE_SHFT 60 +#define HM_PROC_DISABLE_MSK (0xfUL << HM_PROC_DISABLE_SHFT) +#define HM_PROC_DISABLE(x) (0x1UL << (x) + HM_PROC_DISABLE_SHFT) +#define HM_MAX_PSR (0x7UL << 57) +#define HM_MAX_IOSR (0x7UL << 54) +#define HM_MAX_PEND_IOSR (0x7UL << 51) +#define HM_TRIG_SRC_SEL_MSK (0x7UL << 48) +#define HM_TRIG_HEART_EXC (0x0UL << 48) +#define HM_TRIG_REG_BIT (0x1UL << 48) +#define HM_TRIG_SYSCLK (0x2UL << 48) +#define HM_TRIG_MEMCLK_2X (0x3UL << 48) +#define HM_TRIG_MEMCLK (0x4UL << 48) +#define HM_TRIG_IOCLK (0x5UL << 48) +#define HM_PIU_TEST_MODE (0xfUL << 40) +#define HM_GP_FLAG_MSK (0xfUL << 36) +#define HM_GP_FLAG(x) BIT((x) + 36) +#define HM_MAX_PROC_HYST (0xfUL << 32) +#define HM_LLP_WRST_AFTER_RST BIT(28) +#define HM_LLP_LINK_RST BIT(27) +#define HM_LLP_WARM_RST BIT(26) +#define HM_COR_ECC_LCK BIT(25) +#define HM_REDUCED_PWR BIT(24) +#define HM_COLD_RST BIT(23) +#define HM_SW_RST BIT(22) +#define HM_MEM_FORCE_WR BIT(21) +#define HM_DB_ERR_GEN BIT(20) +#define HM_SB_ERR_GEN BIT(19) +#define HM_CACHED_PIO_EN BIT(18) +#define HM_CACHED_PROM_EN BIT(17) +#define HM_PE_SYS_COR_ERE BIT(16) +#define HM_GLOBAL_ECC_EN BIT(15) +#define HM_IO_COH_EN BIT(14) +#define HM_INT_EN BIT(13) +#define HM_DATA_CHK_EN BIT(12) +#define HM_REF_EN BIT(11) +#define HM_BAD_SYSWR_ERE BIT(10) +#define HM_BAD_SYSRD_ERE BIT(9) +#define HM_SYSSTATE_ERE BIT(8) +#define HM_SYSCMD_ERE BIT(7) +#define HM_NCOR_SYS_ERE BIT(6) +#define HM_COR_SYS_ERE BIT(5) +#define HM_DATA_ELMNT_ERE BIT(4) +#define HM_MEM_ADDR_PROC_ERE BIT(3) +#define HM_MEM_ADDR_IO_ERE BIT(2) +#define HM_NCOR_MEM_ERE BIT(1) +#define HM_COR_MEM_ERE BIT(0) + +/* Bits in the HEART_MEM_REF register. */ +#define HEART_MEMREF_REFS(x) ((0xfUL & (x)) << 16) +#define HEART_MEMREF_PERIOD(x) ((0xffffUL & (x))) +#define HEART_MEMREF_REFS_VAL HEART_MEMREF_REFS(8) +#define HEART_MEMREF_PERIOD_VAL HEART_MEMREF_PERIOD(0x4000) +#define HEART_MEMREF_VAL (HEART_MEMREF_REFS_VAL | \ + HEART_MEMREF_PERIOD_VAL) + +/* Bits in the HEART_MEM_REQ_ARB register. */ +#define HEART_MEMARB_IODIS (1 << 20) +#define HEART_MEMARB_MAXPMWRQS (15 << 16) +#define HEART_MEMARB_MAXPMRRQS (15 << 12) +#define HEART_MEMARB_MAXPMRQS (15 << 8) +#define HEART_MEMARB_MAXRRRQS (15 << 4) +#define HEART_MEMARB_MAXGBRRQS (15) + +/* Bits in the HEART_MEMCFG registers. */ +#define HEART_MEMCFG_VALID 0x80000000 /* Bank is valid */ +#define HEART_MEMCFG_DENSITY 0x01c00000 /* Mem density */ +#define HEART_MEMCFG_SIZE_MASK 0x003f0000 /* Mem size mask */ +#define HEART_MEMCFG_ADDR_MASK 0x000001ff /* Base addr mask */ +#define HEART_MEMCFG_SIZE_SHIFT 16 /* Mem size shift */ +#define HEART_MEMCFG_DENSITY_SHIFT 22 /* Density Shift */ +#define HEART_MEMCFG_UNIT_SHIFT 25 /* Unit Shift, 32MB */ + +/* Bits in the HEART_STATUS register */ +#define HEART_STAT_HSTL_SDRV BIT(14) +#define HEART_STAT_FC_CR_OUT(x) BIT((x) + 12) +#define HEART_STAT_DIR_CNNCT BIT(11) +#define HEART_STAT_TRITON BIT(10) +#define HEART_STAT_R4K BIT(9) +#define HEART_STAT_BIG_ENDIAN BIT(8) +#define HEART_STAT_PROC_SHFT 4 +#define HEART_STAT_PROC_MSK (0xfUL << HEART_STAT_PROC_SHFT) +#define HEART_STAT_PROC_ACTIVE(x) (0x1UL << ((x) + HEART_STAT_PROC_SHFT)) +#define HEART_STAT_WIDGET_ID 0xf + +/* Bits in the HEART_CAUSE register */ +#define HC_PE_SYS_COR_ERR_MSK (0xfUL << 60) +#define HC_PE_SYS_COR_ERR(x) BIT((x) + 60) +#define HC_PIOWDB_OFLOW BIT(44) +#define HC_PIORWRB_OFLOW BIT(43) +#define HC_PIUR_ACC_ERR BIT(42) +#define HC_BAD_SYSWR_ERR BIT(41) +#define HC_BAD_SYSRD_ERR BIT(40) +#define HC_SYSSTATE_ERR_MSK (0xfUL << 36) +#define HC_SYSSTATE_ERR(x) BIT((x) + 36) +#define HC_SYSCMD_ERR_MSK (0xfUL << 32) +#define HC_SYSCMD_ERR(x) BIT((x) + 32) +#define HC_NCOR_SYSAD_ERR_MSK (0xfUL << 28) +#define HC_NCOR_SYSAD_ERR(x) BIT((x) + 28) +#define HC_COR_SYSAD_ERR_MSK (0xfUL << 24) +#define HC_COR_SYSAD_ERR(x) BIT((x) + 24) +#define HC_DATA_ELMNT_ERR_MSK (0xfUL << 20) +#define HC_DATA_ELMNT_ERR(x) BIT((x) + 20) +#define HC_WIDGET_ERR BIT(16) +#define HC_MEM_ADDR_ERR_PROC_MSK (0xfUL << 4) +#define HC_MEM_ADDR_ERR_PROC(x) BIT((x) + 4) +#define HC_MEM_ADDR_ERR_IO BIT(2) +#define HC_NCOR_MEM_ERR BIT(1) +#define HC_COR_MEM_ERR BIT(0) + +/* + * HEART has 64 interrupt vectors available to it, subdivided into five + * priority levels. They are numbered 0 to 63. + */ +#define HEART_NUM_IRQS 64 + +/* + * These are the five interrupt priority levels and their corresponding + * CPU IPx interrupt pins. + * + * Level 4 - Error Interrupts. + * Level 3 - HEART timer interrupt. + * Level 2 - CPU IPI, CPU debug, power putton, general device interrupts. + * Level 1 - General device interrupts. + * Level 0 - General device GFX flow control interrupts. + */ +#define HEART_L4_INT_MASK 0xfff8000000000000ULL /* IP6 */ +#define HEART_L3_INT_MASK 0x0004000000000000ULL /* IP5 */ +#define HEART_L2_INT_MASK 0x0003ffff00000000ULL /* IP4 */ +#define HEART_L1_INT_MASK 0x00000000ffff0000ULL /* IP3 */ +#define HEART_L0_INT_MASK 0x000000000000ffffULL /* IP2 */ + +/* HEART L0 Interrupts (Low Priority) */ +#define HEART_L0_INT_GENERIC 0 +#define HEART_L0_INT_FLOW_CTRL_HWTR_0 1 +#define HEART_L0_INT_FLOW_CTRL_HWTR_1 2 + +/* HEART L2 Interrupts (High Priority) */ +#define HEART_L2_INT_RESCHED_CPU_0 46 +#define HEART_L2_INT_RESCHED_CPU_1 47 +#define HEART_L2_INT_CALL_CPU_0 48 +#define HEART_L2_INT_CALL_CPU_1 49 + +/* HEART L3 Interrupts (Compare/Counter Timer) */ +#define HEART_L3_INT_TIMER 50 + +/* HEART L4 Interrupts (Errors) */ +#define HEART_L4_INT_XWID_ERR_9 51 +#define HEART_L4_INT_XWID_ERR_A 52 +#define HEART_L4_INT_XWID_ERR_B 53 +#define HEART_L4_INT_XWID_ERR_C 54 +#define HEART_L4_INT_XWID_ERR_D 55 +#define HEART_L4_INT_XWID_ERR_E 56 +#define HEART_L4_INT_XWID_ERR_F 57 +#define HEART_L4_INT_XWID_ERR_XBOW 58 +#define HEART_L4_INT_CPU_BUS_ERR_0 59 +#define HEART_L4_INT_CPU_BUS_ERR_1 60 +#define HEART_L4_INT_CPU_BUS_ERR_2 61 +#define HEART_L4_INT_CPU_BUS_ERR_3 62 +#define HEART_L4_INT_HEART_EXCP 63 + +extern struct ip30_heart_regs __iomem *heart_regs; + +#define heart_read ____raw_readq +#define heart_write ____raw_writeq + +#endif /* __ASM_SGI_HEART_H */ -- cgit v1.2.3