From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- arch/mips/loongson32/common/platform.c | 311 +++++++++++++++++++++++++++++++++ 1 file changed, 311 insertions(+) create mode 100644 arch/mips/loongson32/common/platform.c (limited to 'arch/mips/loongson32/common/platform.c') diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c new file mode 100644 index 000000000..311dc1580 --- /dev/null +++ b/arch/mips/loongson32/common/platform.c @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2011-2016 Zhang, Keguang + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* 8250/16550 compatible UART */ +#define LS1X_UART(_id) \ + { \ + .mapbase = LS1X_UART ## _id ## _BASE, \ + .irq = LS1X_UART ## _id ## _IRQ, \ + .iotype = UPIO_MEM, \ + .flags = UPF_IOREMAP | UPF_FIXED_TYPE, \ + .type = PORT_16550A, \ + } + +static struct plat_serial8250_port ls1x_serial8250_pdata[] = { + LS1X_UART(0), + LS1X_UART(1), + LS1X_UART(2), + LS1X_UART(3), + {}, +}; + +struct platform_device ls1x_uart_pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = ls1x_serial8250_pdata, + }, +}; + +void __init ls1x_serial_set_uartclk(struct platform_device *pdev) +{ + struct clk *clk; + struct plat_serial8250_port *p; + + clk = clk_get(&pdev->dev, pdev->name); + if (IS_ERR(clk)) { + pr_err("unable to get %s clock, err=%ld", + pdev->name, PTR_ERR(clk)); + return; + } + clk_prepare_enable(clk); + + for (p = pdev->dev.platform_data; p->flags != 0; ++p) + p->uartclk = clk_get_rate(clk); +} + +/* CPUFreq */ +static struct plat_ls1x_cpufreq ls1x_cpufreq_pdata = { + .clk_name = "cpu_clk", + .osc_clk_name = "osc_clk", + .max_freq = 266 * 1000, + .min_freq = 33 * 1000, +}; + +struct platform_device ls1x_cpufreq_pdev = { + .name = "ls1x-cpufreq", + .dev = { + .platform_data = &ls1x_cpufreq_pdata, + }, +}; + +/* Synopsys Ethernet GMAC */ +static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = { + .phy_mask = 0, +}; + +static struct stmmac_dma_cfg ls1x_eth_dma_cfg = { + .pbl = 1, +}; + +int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) +{ + struct plat_stmmacenet_data *plat_dat = NULL; + u32 val; + + val = __raw_readl(LS1X_MUX_CTRL1); + +#if defined(CONFIG_LOONGSON1_LS1B) + plat_dat = dev_get_platdata(&pdev->dev); + if (plat_dat->bus_id) { + __raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 | + GMAC1_USE_UART0, LS1X_MUX_CTRL0); + switch (plat_dat->phy_interface) { + case PHY_INTERFACE_MODE_RGMII: + val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23); + break; + case PHY_INTERFACE_MODE_MII: + val |= (GMAC1_USE_TXCLK | GMAC1_USE_PWM23); + break; + default: + pr_err("unsupported mii mode %d\n", + plat_dat->phy_interface); + return -ENOTSUPP; + } + val &= ~GMAC1_SHUT; + } else { + switch (plat_dat->phy_interface) { + case PHY_INTERFACE_MODE_RGMII: + val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01); + break; + case PHY_INTERFACE_MODE_MII: + val |= (GMAC0_USE_TXCLK | GMAC0_USE_PWM01); + break; + default: + pr_err("unsupported mii mode %d\n", + plat_dat->phy_interface); + return -ENOTSUPP; + } + val &= ~GMAC0_SHUT; + } + __raw_writel(val, LS1X_MUX_CTRL1); +#elif defined(CONFIG_LOONGSON1_LS1C) + plat_dat = dev_get_platdata(&pdev->dev); + + val &= ~PHY_INTF_SELI; + if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII) + val |= 0x4 << PHY_INTF_SELI_SHIFT; + __raw_writel(val, LS1X_MUX_CTRL1); + + val = __raw_readl(LS1X_MUX_CTRL0); + __raw_writel(val & (~GMAC_SHUT), LS1X_MUX_CTRL0); +#endif + + return 0; +} + +static struct plat_stmmacenet_data ls1x_eth0_pdata = { + .bus_id = 0, + .phy_addr = -1, +#if defined(CONFIG_LOONGSON1_LS1B) + .phy_interface = PHY_INTERFACE_MODE_MII, +#elif defined(CONFIG_LOONGSON1_LS1C) + .phy_interface = PHY_INTERFACE_MODE_RMII, +#endif + .mdio_bus_data = &ls1x_mdio_bus_data, + .dma_cfg = &ls1x_eth_dma_cfg, + .has_gmac = 1, + .tx_coe = 1, + .rx_queues_to_use = 1, + .tx_queues_to_use = 1, + .init = ls1x_eth_mux_init, +}; + +static struct resource ls1x_eth0_resources[] = { + [0] = { + .start = LS1X_GMAC0_BASE, + .end = LS1X_GMAC0_BASE + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "macirq", + .start = LS1X_GMAC0_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device ls1x_eth0_pdev = { + .name = "stmmaceth", + .id = 0, + .num_resources = ARRAY_SIZE(ls1x_eth0_resources), + .resource = ls1x_eth0_resources, + .dev = { + .platform_data = &ls1x_eth0_pdata, + }, +}; + +#ifdef CONFIG_LOONGSON1_LS1B +static struct plat_stmmacenet_data ls1x_eth1_pdata = { + .bus_id = 1, + .phy_addr = -1, + .phy_interface = PHY_INTERFACE_MODE_MII, + .mdio_bus_data = &ls1x_mdio_bus_data, + .dma_cfg = &ls1x_eth_dma_cfg, + .has_gmac = 1, + .tx_coe = 1, + .rx_queues_to_use = 1, + .tx_queues_to_use = 1, + .init = ls1x_eth_mux_init, +}; + +static struct resource ls1x_eth1_resources[] = { + [0] = { + .start = LS1X_GMAC1_BASE, + .end = LS1X_GMAC1_BASE + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "macirq", + .start = LS1X_GMAC1_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device ls1x_eth1_pdev = { + .name = "stmmaceth", + .id = 1, + .num_resources = ARRAY_SIZE(ls1x_eth1_resources), + .resource = ls1x_eth1_resources, + .dev = { + .platform_data = &ls1x_eth1_pdata, + }, +}; +#endif /* CONFIG_LOONGSON1_LS1B */ + +/* GPIO */ +static struct resource ls1x_gpio0_resources[] = { + [0] = { + .start = LS1X_GPIO0_BASE, + .end = LS1X_GPIO0_BASE + SZ_4 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device ls1x_gpio0_pdev = { + .name = "ls1x-gpio", + .id = 0, + .num_resources = ARRAY_SIZE(ls1x_gpio0_resources), + .resource = ls1x_gpio0_resources, +}; + +static struct resource ls1x_gpio1_resources[] = { + [0] = { + .start = LS1X_GPIO1_BASE, + .end = LS1X_GPIO1_BASE + SZ_4 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device ls1x_gpio1_pdev = { + .name = "ls1x-gpio", + .id = 1, + .num_resources = ARRAY_SIZE(ls1x_gpio1_resources), + .resource = ls1x_gpio1_resources, +}; + +/* USB EHCI */ +static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32); + +static struct resource ls1x_ehci_resources[] = { + [0] = { + .start = LS1X_EHCI_BASE, + .end = LS1X_EHCI_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = LS1X_EHCI_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct usb_ehci_pdata ls1x_ehci_pdata = { +}; + +struct platform_device ls1x_ehci_pdev = { + .name = "ehci-platform", + .id = -1, + .num_resources = ARRAY_SIZE(ls1x_ehci_resources), + .resource = ls1x_ehci_resources, + .dev = { + .dma_mask = &ls1x_ehci_dmamask, + .platform_data = &ls1x_ehci_pdata, + }, +}; + +/* Real Time Clock */ +void __init ls1x_rtc_set_extclk(struct platform_device *pdev) +{ + u32 val = __raw_readl(LS1X_RTC_CTRL); + + if (!(val & RTC_EXTCLK_OK)) + __raw_writel(val | RTC_EXTCLK_EN, LS1X_RTC_CTRL); +} + +struct platform_device ls1x_rtc_pdev = { + .name = "ls1x-rtc", + .id = -1, +}; + +/* Watchdog */ +static struct resource ls1x_wdt_resources[] = { + { + .start = LS1X_WDT_BASE, + .end = LS1X_WDT_BASE + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device ls1x_wdt_pdev = { + .name = "ls1x-wdt", + .id = -1, + .num_resources = ARRAY_SIZE(ls1x_wdt_resources), + .resource = ls1x_wdt_resources, +}; -- cgit v1.2.3