From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- arch/powerpc/platforms/powernv/pci-ioda.c | 3250 +++++++++++++++++++++++++++++ 1 file changed, 3250 insertions(+) create mode 100644 arch/powerpc/platforms/powernv/pci-ioda.c (limited to 'arch/powerpc/platforms/powernv/pci-ioda.c') diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c new file mode 100644 index 000000000..5c144c05c --- /dev/null +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -0,0 +1,3250 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Support PCI/PCIe on PowerNV platforms + * + * Copyright 2011 Benjamin Herrenschmidt, IBM Corp. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "powernv.h" +#include "pci.h" +#include "../../../../drivers/pci/pci.h" + +#define PNV_IODA1_M64_NUM 16 /* Number of M64 BARs */ +#define PNV_IODA1_M64_SEGS 8 /* Segments per M64 BAR */ +#define PNV_IODA1_DMA32_SEGSIZE 0x10000000 + +static const char * const pnv_phb_names[] = { "IODA1", "IODA2", "NPU_OCAPI" }; + +static void pnv_pci_ioda2_set_bypass(struct pnv_ioda_pe *pe, bool enable); +static void pnv_pci_configure_bus(struct pci_bus *bus); + +void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level, + const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + char pfix[32]; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; + + if (pe->flags & PNV_IODA_PE_DEV) + strscpy(pfix, dev_name(&pe->pdev->dev), sizeof(pfix)); + else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)) + sprintf(pfix, "%04x:%02x ", + pci_domain_nr(pe->pbus), pe->pbus->number); +#ifdef CONFIG_PCI_IOV + else if (pe->flags & PNV_IODA_PE_VF) + sprintf(pfix, "%04x:%02x:%2x.%d", + pci_domain_nr(pe->parent_dev->bus), + (pe->rid & 0xff00) >> 8, + PCI_SLOT(pe->rid), PCI_FUNC(pe->rid)); +#endif /* CONFIG_PCI_IOV*/ + + printk("%spci %s: [PE# %.2x] %pV", + level, pfix, pe->pe_number, &vaf); + + va_end(args); +} + +static bool pnv_iommu_bypass_disabled __read_mostly; +static bool pci_reset_phbs __read_mostly; + +static int __init iommu_setup(char *str) +{ + if (!str) + return -EINVAL; + + while (*str) { + if (!strncmp(str, "nobypass", 8)) { + pnv_iommu_bypass_disabled = true; + pr_info("PowerNV: IOMMU bypass window disabled.\n"); + break; + } + str += strcspn(str, ","); + if (*str == ',') + str++; + } + + return 0; +} +early_param("iommu", iommu_setup); + +static int __init pci_reset_phbs_setup(char *str) +{ + pci_reset_phbs = true; + return 0; +} + +early_param("ppc_pci_reset_phbs", pci_reset_phbs_setup); + +static struct pnv_ioda_pe *pnv_ioda_init_pe(struct pnv_phb *phb, int pe_no) +{ + s64 rc; + + phb->ioda.pe_array[pe_no].phb = phb; + phb->ioda.pe_array[pe_no].pe_number = pe_no; + phb->ioda.pe_array[pe_no].dma_setup_done = false; + + /* + * Clear the PE frozen state as it might be put into frozen state + * in the last PCI remove path. It's not harmful to do so when the + * PE is already in unfrozen state. + */ + rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, + OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); + if (rc != OPAL_SUCCESS && rc != OPAL_UNSUPPORTED) + pr_warn("%s: Error %lld unfreezing PHB#%x-PE#%x\n", + __func__, rc, phb->hose->global_number, pe_no); + + return &phb->ioda.pe_array[pe_no]; +} + +static void pnv_ioda_reserve_pe(struct pnv_phb *phb, int pe_no) +{ + if (!(pe_no >= 0 && pe_no < phb->ioda.total_pe_num)) { + pr_warn("%s: Invalid PE %x on PHB#%x\n", + __func__, pe_no, phb->hose->global_number); + return; + } + + mutex_lock(&phb->ioda.pe_alloc_mutex); + if (test_and_set_bit(pe_no, phb->ioda.pe_alloc)) + pr_debug("%s: PE %x was reserved on PHB#%x\n", + __func__, pe_no, phb->hose->global_number); + mutex_unlock(&phb->ioda.pe_alloc_mutex); + + pnv_ioda_init_pe(phb, pe_no); +} + +struct pnv_ioda_pe *pnv_ioda_alloc_pe(struct pnv_phb *phb, int count) +{ + struct pnv_ioda_pe *ret = NULL; + int run = 0, pe, i; + + mutex_lock(&phb->ioda.pe_alloc_mutex); + + /* scan backwards for a run of @count cleared bits */ + for (pe = phb->ioda.total_pe_num - 1; pe >= 0; pe--) { + if (test_bit(pe, phb->ioda.pe_alloc)) { + run = 0; + continue; + } + + run++; + if (run == count) + break; + } + if (run != count) + goto out; + + for (i = pe; i < pe + count; i++) { + set_bit(i, phb->ioda.pe_alloc); + pnv_ioda_init_pe(phb, i); + } + ret = &phb->ioda.pe_array[pe]; + +out: + mutex_unlock(&phb->ioda.pe_alloc_mutex); + return ret; +} + +void pnv_ioda_free_pe(struct pnv_ioda_pe *pe) +{ + struct pnv_phb *phb = pe->phb; + unsigned int pe_num = pe->pe_number; + + WARN_ON(pe->pdev); + memset(pe, 0, sizeof(struct pnv_ioda_pe)); + + mutex_lock(&phb->ioda.pe_alloc_mutex); + clear_bit(pe_num, phb->ioda.pe_alloc); + mutex_unlock(&phb->ioda.pe_alloc_mutex); +} + +/* The default M64 BAR is shared by all PEs */ +static int pnv_ioda2_init_m64(struct pnv_phb *phb) +{ + const char *desc; + struct resource *r; + s64 rc; + + /* Configure the default M64 BAR */ + rc = opal_pci_set_phb_mem_window(phb->opal_id, + OPAL_M64_WINDOW_TYPE, + phb->ioda.m64_bar_idx, + phb->ioda.m64_base, + 0, /* unused */ + phb->ioda.m64_size); + if (rc != OPAL_SUCCESS) { + desc = "configuring"; + goto fail; + } + + /* Enable the default M64 BAR */ + rc = opal_pci_phb_mmio_enable(phb->opal_id, + OPAL_M64_WINDOW_TYPE, + phb->ioda.m64_bar_idx, + OPAL_ENABLE_M64_SPLIT); + if (rc != OPAL_SUCCESS) { + desc = "enabling"; + goto fail; + } + + /* + * Exclude the segments for reserved and root bus PE, which + * are first or last two PEs. + */ + r = &phb->hose->mem_resources[1]; + if (phb->ioda.reserved_pe_idx == 0) + r->start += (2 * phb->ioda.m64_segsize); + else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1)) + r->end -= (2 * phb->ioda.m64_segsize); + else + pr_warn(" Cannot strip M64 segment for reserved PE#%x\n", + phb->ioda.reserved_pe_idx); + + return 0; + +fail: + pr_warn(" Failure %lld %s M64 BAR#%d\n", + rc, desc, phb->ioda.m64_bar_idx); + opal_pci_phb_mmio_enable(phb->opal_id, + OPAL_M64_WINDOW_TYPE, + phb->ioda.m64_bar_idx, + OPAL_DISABLE_M64); + return -EIO; +} + +static void pnv_ioda_reserve_dev_m64_pe(struct pci_dev *pdev, + unsigned long *pe_bitmap) +{ + struct pnv_phb *phb = pci_bus_to_pnvhb(pdev->bus); + struct resource *r; + resource_size_t base, sgsz, start, end; + int segno, i; + + base = phb->ioda.m64_base; + sgsz = phb->ioda.m64_segsize; + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + r = &pdev->resource[i]; + if (!r->parent || !pnv_pci_is_m64(phb, r)) + continue; + + start = ALIGN_DOWN(r->start - base, sgsz); + end = ALIGN(r->end - base, sgsz); + for (segno = start / sgsz; segno < end / sgsz; segno++) { + if (pe_bitmap) + set_bit(segno, pe_bitmap); + else + pnv_ioda_reserve_pe(phb, segno); + } + } +} + +static int pnv_ioda1_init_m64(struct pnv_phb *phb) +{ + struct resource *r; + int index; + + /* + * There are 16 M64 BARs, each of which has 8 segments. So + * there are as many M64 segments as the maximum number of + * PEs, which is 128. + */ + for (index = 0; index < PNV_IODA1_M64_NUM; index++) { + unsigned long base, segsz = phb->ioda.m64_segsize; + int64_t rc; + + base = phb->ioda.m64_base + + index * PNV_IODA1_M64_SEGS * segsz; + rc = opal_pci_set_phb_mem_window(phb->opal_id, + OPAL_M64_WINDOW_TYPE, index, base, 0, + PNV_IODA1_M64_SEGS * segsz); + if (rc != OPAL_SUCCESS) { + pr_warn(" Error %lld setting M64 PHB#%x-BAR#%d\n", + rc, phb->hose->global_number, index); + goto fail; + } + + rc = opal_pci_phb_mmio_enable(phb->opal_id, + OPAL_M64_WINDOW_TYPE, index, + OPAL_ENABLE_M64_SPLIT); + if (rc != OPAL_SUCCESS) { + pr_warn(" Error %lld enabling M64 PHB#%x-BAR#%d\n", + rc, phb->hose->global_number, index); + goto fail; + } + } + + for (index = 0; index < phb->ioda.total_pe_num; index++) { + int64_t rc; + + /* + * P7IOC supports M64DT, which helps mapping M64 segment + * to one particular PE#. However, PHB3 has fixed mapping + * between M64 segment and PE#. In order to have same logic + * for P7IOC and PHB3, we enforce fixed mapping between M64 + * segment and PE# on P7IOC. + */ + rc = opal_pci_map_pe_mmio_window(phb->opal_id, + index, OPAL_M64_WINDOW_TYPE, + index / PNV_IODA1_M64_SEGS, + index % PNV_IODA1_M64_SEGS); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Error %lld mapping M64 for PHB#%x-PE#%x\n", + __func__, rc, phb->hose->global_number, + index); + goto fail; + } + } + + /* + * Exclude the segments for reserved and root bus PE, which + * are first or last two PEs. + */ + r = &phb->hose->mem_resources[1]; + if (phb->ioda.reserved_pe_idx == 0) + r->start += (2 * phb->ioda.m64_segsize); + else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1)) + r->end -= (2 * phb->ioda.m64_segsize); + else + WARN(1, "Wrong reserved PE#%x on PHB#%x\n", + phb->ioda.reserved_pe_idx, phb->hose->global_number); + + return 0; + +fail: + for ( ; index >= 0; index--) + opal_pci_phb_mmio_enable(phb->opal_id, + OPAL_M64_WINDOW_TYPE, index, OPAL_DISABLE_M64); + + return -EIO; +} + +static void pnv_ioda_reserve_m64_pe(struct pci_bus *bus, + unsigned long *pe_bitmap, + bool all) +{ + struct pci_dev *pdev; + + list_for_each_entry(pdev, &bus->devices, bus_list) { + pnv_ioda_reserve_dev_m64_pe(pdev, pe_bitmap); + + if (all && pdev->subordinate) + pnv_ioda_reserve_m64_pe(pdev->subordinate, + pe_bitmap, all); + } +} + +static struct pnv_ioda_pe *pnv_ioda_pick_m64_pe(struct pci_bus *bus, bool all) +{ + struct pnv_phb *phb = pci_bus_to_pnvhb(bus); + struct pnv_ioda_pe *master_pe, *pe; + unsigned long size, *pe_alloc; + int i; + + /* Root bus shouldn't use M64 */ + if (pci_is_root_bus(bus)) + return NULL; + + /* Allocate bitmap */ + size = ALIGN(phb->ioda.total_pe_num / 8, sizeof(unsigned long)); + pe_alloc = kzalloc(size, GFP_KERNEL); + if (!pe_alloc) { + pr_warn("%s: Out of memory !\n", + __func__); + return NULL; + } + + /* Figure out reserved PE numbers by the PE */ + pnv_ioda_reserve_m64_pe(bus, pe_alloc, all); + + /* + * the current bus might not own M64 window and that's all + * contributed by its child buses. For the case, we needn't + * pick M64 dependent PE#. + */ + if (bitmap_empty(pe_alloc, phb->ioda.total_pe_num)) { + kfree(pe_alloc); + return NULL; + } + + /* + * Figure out the master PE and put all slave PEs to master + * PE's list to form compound PE. + */ + master_pe = NULL; + i = -1; + while ((i = find_next_bit(pe_alloc, phb->ioda.total_pe_num, i + 1)) < + phb->ioda.total_pe_num) { + pe = &phb->ioda.pe_array[i]; + + phb->ioda.m64_segmap[pe->pe_number] = pe->pe_number; + if (!master_pe) { + pe->flags |= PNV_IODA_PE_MASTER; + INIT_LIST_HEAD(&pe->slaves); + master_pe = pe; + } else { + pe->flags |= PNV_IODA_PE_SLAVE; + pe->master = master_pe; + list_add_tail(&pe->list, &master_pe->slaves); + } + } + + kfree(pe_alloc); + return master_pe; +} + +static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb) +{ + struct pci_controller *hose = phb->hose; + struct device_node *dn = hose->dn; + struct resource *res; + u32 m64_range[2], i; + const __be32 *r; + u64 pci_addr; + + if (phb->type != PNV_PHB_IODA1 && phb->type != PNV_PHB_IODA2) { + pr_info(" Not support M64 window\n"); + return; + } + + if (!firmware_has_feature(FW_FEATURE_OPAL)) { + pr_info(" Firmware too old to support M64 window\n"); + return; + } + + r = of_get_property(dn, "ibm,opal-m64-window", NULL); + if (!r) { + pr_info(" No on %pOF\n", + dn); + return; + } + + /* + * Find the available M64 BAR range and pickup the last one for + * covering the whole 64-bits space. We support only one range. + */ + if (of_property_read_u32_array(dn, "ibm,opal-available-m64-ranges", + m64_range, 2)) { + /* In absence of the property, assume 0..15 */ + m64_range[0] = 0; + m64_range[1] = 16; + } + /* We only support 64 bits in our allocator */ + if (m64_range[1] > 63) { + pr_warn("%s: Limiting M64 range to 63 (from %d) on PHB#%x\n", + __func__, m64_range[1], phb->hose->global_number); + m64_range[1] = 63; + } + /* Empty range, no m64 */ + if (m64_range[1] <= m64_range[0]) { + pr_warn("%s: M64 empty, disabling M64 usage on PHB#%x\n", + __func__, phb->hose->global_number); + return; + } + + /* Configure M64 informations */ + res = &hose->mem_resources[1]; + res->name = dn->full_name; + res->start = of_translate_address(dn, r + 2); + res->end = res->start + of_read_number(r + 4, 2) - 1; + res->flags = (IORESOURCE_MEM | IORESOURCE_MEM_64 | IORESOURCE_PREFETCH); + pci_addr = of_read_number(r, 2); + hose->mem_offset[1] = res->start - pci_addr; + + phb->ioda.m64_size = resource_size(res); + phb->ioda.m64_segsize = phb->ioda.m64_size / phb->ioda.total_pe_num; + phb->ioda.m64_base = pci_addr; + + /* This lines up nicely with the display from processing OF ranges */ + pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx (M64 #%d..%d)\n", + res->start, res->end, pci_addr, m64_range[0], + m64_range[0] + m64_range[1] - 1); + + /* Mark all M64 used up by default */ + phb->ioda.m64_bar_alloc = (unsigned long)-1; + + /* Use last M64 BAR to cover M64 window */ + m64_range[1]--; + phb->ioda.m64_bar_idx = m64_range[0] + m64_range[1]; + + pr_info(" Using M64 #%d as default window\n", phb->ioda.m64_bar_idx); + + /* Mark remaining ones free */ + for (i = m64_range[0]; i < m64_range[1]; i++) + clear_bit(i, &phb->ioda.m64_bar_alloc); + + /* + * Setup init functions for M64 based on IODA version, IODA3 uses + * the IODA2 code. + */ + if (phb->type == PNV_PHB_IODA1) + phb->init_m64 = pnv_ioda1_init_m64; + else + phb->init_m64 = pnv_ioda2_init_m64; +} + +static void pnv_ioda_freeze_pe(struct pnv_phb *phb, int pe_no) +{ + struct pnv_ioda_pe *pe = &phb->ioda.pe_array[pe_no]; + struct pnv_ioda_pe *slave; + s64 rc; + + /* Fetch master PE */ + if (pe->flags & PNV_IODA_PE_SLAVE) { + pe = pe->master; + if (WARN_ON(!pe || !(pe->flags & PNV_IODA_PE_MASTER))) + return; + + pe_no = pe->pe_number; + } + + /* Freeze master PE */ + rc = opal_pci_eeh_freeze_set(phb->opal_id, + pe_no, + OPAL_EEH_ACTION_SET_FREEZE_ALL); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n", + __func__, rc, phb->hose->global_number, pe_no); + return; + } + + /* Freeze slave PEs */ + if (!(pe->flags & PNV_IODA_PE_MASTER)) + return; + + list_for_each_entry(slave, &pe->slaves, list) { + rc = opal_pci_eeh_freeze_set(phb->opal_id, + slave->pe_number, + OPAL_EEH_ACTION_SET_FREEZE_ALL); + if (rc != OPAL_SUCCESS) + pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n", + __func__, rc, phb->hose->global_number, + slave->pe_number); + } +} + +static int pnv_ioda_unfreeze_pe(struct pnv_phb *phb, int pe_no, int opt) +{ + struct pnv_ioda_pe *pe, *slave; + s64 rc; + + /* Find master PE */ + pe = &phb->ioda.pe_array[pe_no]; + if (pe->flags & PNV_IODA_PE_SLAVE) { + pe = pe->master; + WARN_ON(!pe || !(pe->flags & PNV_IODA_PE_MASTER)); + pe_no = pe->pe_number; + } + + /* Clear frozen state for master PE */ + rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, opt); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld clear %d on PHB#%x-PE#%x\n", + __func__, rc, opt, phb->hose->global_number, pe_no); + return -EIO; + } + + if (!(pe->flags & PNV_IODA_PE_MASTER)) + return 0; + + /* Clear frozen state for slave PEs */ + list_for_each_entry(slave, &pe->slaves, list) { + rc = opal_pci_eeh_freeze_clear(phb->opal_id, + slave->pe_number, + opt); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld clear %d on PHB#%x-PE#%x\n", + __func__, rc, opt, phb->hose->global_number, + slave->pe_number); + return -EIO; + } + } + + return 0; +} + +static int pnv_ioda_get_pe_state(struct pnv_phb *phb, int pe_no) +{ + struct pnv_ioda_pe *slave, *pe; + u8 fstate = 0, state; + __be16 pcierr = 0; + s64 rc; + + /* Sanity check on PE number */ + if (pe_no < 0 || pe_no >= phb->ioda.total_pe_num) + return OPAL_EEH_STOPPED_PERM_UNAVAIL; + + /* + * Fetch the master PE and the PE instance might be + * not initialized yet. + */ + pe = &phb->ioda.pe_array[pe_no]; + if (pe->flags & PNV_IODA_PE_SLAVE) { + pe = pe->master; + WARN_ON(!pe || !(pe->flags & PNV_IODA_PE_MASTER)); + pe_no = pe->pe_number; + } + + /* Check the master PE */ + rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, + &state, &pcierr, NULL); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld getting " + "PHB#%x-PE#%x state\n", + __func__, rc, + phb->hose->global_number, pe_no); + return OPAL_EEH_STOPPED_TEMP_UNAVAIL; + } + + /* Check the slave PE */ + if (!(pe->flags & PNV_IODA_PE_MASTER)) + return state; + + list_for_each_entry(slave, &pe->slaves, list) { + rc = opal_pci_eeh_freeze_status(phb->opal_id, + slave->pe_number, + &fstate, + &pcierr, + NULL); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld getting " + "PHB#%x-PE#%x state\n", + __func__, rc, + phb->hose->global_number, slave->pe_number); + return OPAL_EEH_STOPPED_TEMP_UNAVAIL; + } + + /* + * Override the result based on the ascending + * priority. + */ + if (fstate > state) + state = fstate; + } + + return state; +} + +struct pnv_ioda_pe *pnv_pci_bdfn_to_pe(struct pnv_phb *phb, u16 bdfn) +{ + int pe_number = phb->ioda.pe_rmap[bdfn]; + + if (pe_number == IODA_INVALID_PE) + return NULL; + + return &phb->ioda.pe_array[pe_number]; +} + +struct pnv_ioda_pe *pnv_ioda_get_pe(struct pci_dev *dev) +{ + struct pnv_phb *phb = pci_bus_to_pnvhb(dev->bus); + struct pci_dn *pdn = pci_get_pdn(dev); + + if (!pdn) + return NULL; + if (pdn->pe_number == IODA_INVALID_PE) + return NULL; + return &phb->ioda.pe_array[pdn->pe_number]; +} + +static int pnv_ioda_set_one_peltv(struct pnv_phb *phb, + struct pnv_ioda_pe *parent, + struct pnv_ioda_pe *child, + bool is_add) +{ + const char *desc = is_add ? "adding" : "removing"; + uint8_t op = is_add ? OPAL_ADD_PE_TO_DOMAIN : + OPAL_REMOVE_PE_FROM_DOMAIN; + struct pnv_ioda_pe *slave; + long rc; + + /* Parent PE affects child PE */ + rc = opal_pci_set_peltv(phb->opal_id, parent->pe_number, + child->pe_number, op); + if (rc != OPAL_SUCCESS) { + pe_warn(child, "OPAL error %ld %s to parent PELTV\n", + rc, desc); + return -ENXIO; + } + + if (!(child->flags & PNV_IODA_PE_MASTER)) + return 0; + + /* Compound case: parent PE affects slave PEs */ + list_for_each_entry(slave, &child->slaves, list) { + rc = opal_pci_set_peltv(phb->opal_id, parent->pe_number, + slave->pe_number, op); + if (rc != OPAL_SUCCESS) { + pe_warn(slave, "OPAL error %ld %s to parent PELTV\n", + rc, desc); + return -ENXIO; + } + } + + return 0; +} + +static int pnv_ioda_set_peltv(struct pnv_phb *phb, + struct pnv_ioda_pe *pe, + bool is_add) +{ + struct pnv_ioda_pe *slave; + struct pci_dev *pdev = NULL; + int ret; + + /* + * Clear PE frozen state. If it's master PE, we need + * clear slave PE frozen state as well. + */ + if (is_add) { + opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number, + OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); + if (pe->flags & PNV_IODA_PE_MASTER) { + list_for_each_entry(slave, &pe->slaves, list) + opal_pci_eeh_freeze_clear(phb->opal_id, + slave->pe_number, + OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); + } + } + + /* + * Associate PE in PELT. We need add the PE into the + * corresponding PELT-V as well. Otherwise, the error + * originated from the PE might contribute to other + * PEs. + */ + ret = pnv_ioda_set_one_peltv(phb, pe, pe, is_add); + if (ret) + return ret; + + /* For compound PEs, any one affects all of them */ + if (pe->flags & PNV_IODA_PE_MASTER) { + list_for_each_entry(slave, &pe->slaves, list) { + ret = pnv_ioda_set_one_peltv(phb, slave, pe, is_add); + if (ret) + return ret; + } + } + + if (pe->flags & (PNV_IODA_PE_BUS_ALL | PNV_IODA_PE_BUS)) + pdev = pe->pbus->self; + else if (pe->flags & PNV_IODA_PE_DEV) + pdev = pe->pdev->bus->self; +#ifdef CONFIG_PCI_IOV + else if (pe->flags & PNV_IODA_PE_VF) + pdev = pe->parent_dev; +#endif /* CONFIG_PCI_IOV */ + while (pdev) { + struct pci_dn *pdn = pci_get_pdn(pdev); + struct pnv_ioda_pe *parent; + + if (pdn && pdn->pe_number != IODA_INVALID_PE) { + parent = &phb->ioda.pe_array[pdn->pe_number]; + ret = pnv_ioda_set_one_peltv(phb, parent, pe, is_add); + if (ret) + return ret; + } + + pdev = pdev->bus->self; + } + + return 0; +} + +static void pnv_ioda_unset_peltv(struct pnv_phb *phb, + struct pnv_ioda_pe *pe, + struct pci_dev *parent) +{ + int64_t rc; + + while (parent) { + struct pci_dn *pdn = pci_get_pdn(parent); + + if (pdn && pdn->pe_number != IODA_INVALID_PE) { + rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number, + pe->pe_number, + OPAL_REMOVE_PE_FROM_DOMAIN); + /* XXX What to do in case of error ? */ + } + parent = parent->bus->self; + } + + opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number, + OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); + + /* Disassociate PE in PELT */ + rc = opal_pci_set_peltv(phb->opal_id, pe->pe_number, + pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN); + if (rc) + pe_warn(pe, "OPAL error %lld remove self from PELTV\n", rc); +} + +int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe) +{ + struct pci_dev *parent; + uint8_t bcomp, dcomp, fcomp; + int64_t rc; + long rid_end, rid; + + /* Currently, we just deconfigure VF PE. Bus PE will always there.*/ + if (pe->pbus) { + int count; + + dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER; + fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER; + parent = pe->pbus->self; + if (pe->flags & PNV_IODA_PE_BUS_ALL) + count = resource_size(&pe->pbus->busn_res); + else + count = 1; + + switch(count) { + case 1: bcomp = OpalPciBusAll; break; + case 2: bcomp = OpalPciBus7Bits; break; + case 4: bcomp = OpalPciBus6Bits; break; + case 8: bcomp = OpalPciBus5Bits; break; + case 16: bcomp = OpalPciBus4Bits; break; + case 32: bcomp = OpalPciBus3Bits; break; + default: + dev_err(&pe->pbus->dev, "Number of subordinate buses %d unsupported\n", + count); + /* Do an exact match only */ + bcomp = OpalPciBusAll; + } + rid_end = pe->rid + (count << 8); + } else { +#ifdef CONFIG_PCI_IOV + if (pe->flags & PNV_IODA_PE_VF) + parent = pe->parent_dev; + else +#endif + parent = pe->pdev->bus->self; + bcomp = OpalPciBusAll; + dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER; + fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER; + rid_end = pe->rid + 1; + } + + /* Clear the reverse map */ + for (rid = pe->rid; rid < rid_end; rid++) + phb->ioda.pe_rmap[rid] = IODA_INVALID_PE; + + /* + * Release from all parents PELT-V. NPUs don't have a PELTV + * table + */ + if (phb->type != PNV_PHB_NPU_OCAPI) + pnv_ioda_unset_peltv(phb, pe, parent); + + rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid, + bcomp, dcomp, fcomp, OPAL_UNMAP_PE); + if (rc) + pe_err(pe, "OPAL error %lld trying to setup PELT table\n", rc); + + pe->pbus = NULL; + pe->pdev = NULL; +#ifdef CONFIG_PCI_IOV + pe->parent_dev = NULL; +#endif + + return 0; +} + +int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe) +{ + uint8_t bcomp, dcomp, fcomp; + long rc, rid_end, rid; + + /* Bus validation ? */ + if (pe->pbus) { + int count; + + dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER; + fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER; + if (pe->flags & PNV_IODA_PE_BUS_ALL) + count = resource_size(&pe->pbus->busn_res); + else + count = 1; + + switch(count) { + case 1: bcomp = OpalPciBusAll; break; + case 2: bcomp = OpalPciBus7Bits; break; + case 4: bcomp = OpalPciBus6Bits; break; + case 8: bcomp = OpalPciBus5Bits; break; + case 16: bcomp = OpalPciBus4Bits; break; + case 32: bcomp = OpalPciBus3Bits; break; + default: + dev_err(&pe->pbus->dev, "Number of subordinate buses %d unsupported\n", + count); + /* Do an exact match only */ + bcomp = OpalPciBusAll; + } + rid_end = pe->rid + (count << 8); + } else { + bcomp = OpalPciBusAll; + dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER; + fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER; + rid_end = pe->rid + 1; + } + + /* + * Associate PE in PELT. We need add the PE into the + * corresponding PELT-V as well. Otherwise, the error + * originated from the PE might contribute to other + * PEs. + */ + rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid, + bcomp, dcomp, fcomp, OPAL_MAP_PE); + if (rc) { + pe_err(pe, "OPAL error %ld trying to setup PELT table\n", rc); + return -ENXIO; + } + + /* + * Configure PELTV. NPUs don't have a PELTV table so skip + * configuration on them. + */ + if (phb->type != PNV_PHB_NPU_OCAPI) + pnv_ioda_set_peltv(phb, pe, true); + + /* Setup reverse map */ + for (rid = pe->rid; rid < rid_end; rid++) + phb->ioda.pe_rmap[rid] = pe->pe_number; + + /* Setup one MVTs on IODA1 */ + if (phb->type != PNV_PHB_IODA1) { + pe->mve_number = 0; + goto out; + } + + pe->mve_number = pe->pe_number; + rc = opal_pci_set_mve(phb->opal_id, pe->mve_number, pe->pe_number); + if (rc != OPAL_SUCCESS) { + pe_err(pe, "OPAL error %ld setting up MVE %x\n", + rc, pe->mve_number); + pe->mve_number = -1; + } else { + rc = opal_pci_set_mve_enable(phb->opal_id, + pe->mve_number, OPAL_ENABLE_MVE); + if (rc) { + pe_err(pe, "OPAL error %ld enabling MVE %x\n", + rc, pe->mve_number); + pe->mve_number = -1; + } + } + +out: + return 0; +} + +static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev) +{ + struct pnv_phb *phb = pci_bus_to_pnvhb(dev->bus); + struct pci_dn *pdn = pci_get_pdn(dev); + struct pnv_ioda_pe *pe; + + if (!pdn) { + pr_err("%s: Device tree node not associated properly\n", + pci_name(dev)); + return NULL; + } + if (pdn->pe_number != IODA_INVALID_PE) + return NULL; + + pe = pnv_ioda_alloc_pe(phb, 1); + if (!pe) { + pr_warn("%s: Not enough PE# available, disabling device\n", + pci_name(dev)); + return NULL; + } + + /* NOTE: We don't get a reference for the pointer in the PE + * data structure, both the device and PE structures should be + * destroyed at the same time. + * + * At some point we want to remove the PDN completely anyways + */ + pdn->pe_number = pe->pe_number; + pe->flags = PNV_IODA_PE_DEV; + pe->pdev = dev; + pe->pbus = NULL; + pe->mve_number = -1; + pe->rid = dev->bus->number << 8 | pdn->devfn; + pe->device_count++; + + pe_info(pe, "Associated device to PE\n"); + + if (pnv_ioda_configure_pe(phb, pe)) { + /* XXX What do we do here ? */ + pnv_ioda_free_pe(pe); + pdn->pe_number = IODA_INVALID_PE; + pe->pdev = NULL; + return NULL; + } + + /* Put PE to the list */ + mutex_lock(&phb->ioda.pe_list_mutex); + list_add_tail(&pe->list, &phb->ioda.pe_list); + mutex_unlock(&phb->ioda.pe_list_mutex); + return pe; +} + +/* + * There're 2 types of PCI bus sensitive PEs: One that is compromised of + * single PCI bus. Another one that contains the primary PCI bus and its + * subordinate PCI devices and buses. The second type of PE is normally + * orgiriated by PCIe-to-PCI bridge or PLX switch downstream ports. + */ +static struct pnv_ioda_pe *pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all) +{ + struct pnv_phb *phb = pci_bus_to_pnvhb(bus); + struct pnv_ioda_pe *pe = NULL; + unsigned int pe_num; + + /* + * In partial hotplug case, the PE instance might be still alive. + * We should reuse it instead of allocating a new one. + */ + pe_num = phb->ioda.pe_rmap[bus->number << 8]; + if (WARN_ON(pe_num != IODA_INVALID_PE)) { + pe = &phb->ioda.pe_array[pe_num]; + return NULL; + } + + /* PE number for root bus should have been reserved */ + if (pci_is_root_bus(bus)) + pe = &phb->ioda.pe_array[phb->ioda.root_pe_idx]; + + /* Check if PE is determined by M64 */ + if (!pe) + pe = pnv_ioda_pick_m64_pe(bus, all); + + /* The PE number isn't pinned by M64 */ + if (!pe) + pe = pnv_ioda_alloc_pe(phb, 1); + + if (!pe) { + pr_warn("%s: Not enough PE# available for PCI bus %04x:%02x\n", + __func__, pci_domain_nr(bus), bus->number); + return NULL; + } + + pe->flags |= (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS); + pe->pbus = bus; + pe->pdev = NULL; + pe->mve_number = -1; + pe->rid = bus->busn_res.start << 8; + + if (all) + pe_info(pe, "Secondary bus %pad..%pad associated with PE#%x\n", + &bus->busn_res.start, &bus->busn_res.end, + pe->pe_number); + else + pe_info(pe, "Secondary bus %pad associated with PE#%x\n", + &bus->busn_res.start, pe->pe_number); + + if (pnv_ioda_configure_pe(phb, pe)) { + /* XXX What do we do here ? */ + pnv_ioda_free_pe(pe); + pe->pbus = NULL; + return NULL; + } + + /* Put PE to the list */ + list_add_tail(&pe->list, &phb->ioda.pe_list); + + return pe; +} + +static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb, + struct pnv_ioda_pe *pe); + +static void pnv_pci_ioda_dma_dev_setup(struct pci_dev *pdev) +{ + struct pnv_phb *phb = pci_bus_to_pnvhb(pdev->bus); + struct pci_dn *pdn = pci_get_pdn(pdev); + struct pnv_ioda_pe *pe; + + /* Check if the BDFN for this device is associated with a PE yet */ + pe = pnv_pci_bdfn_to_pe(phb, pdev->devfn | (pdev->bus->number << 8)); + if (!pe) { + /* VF PEs should be pre-configured in pnv_pci_sriov_enable() */ + if (WARN_ON(pdev->is_virtfn)) + return; + + pnv_pci_configure_bus(pdev->bus); + pe = pnv_pci_bdfn_to_pe(phb, pdev->devfn | (pdev->bus->number << 8)); + pci_info(pdev, "Configured PE#%x\n", pe ? pe->pe_number : 0xfffff); + + + /* + * If we can't setup the IODA PE something has gone horribly + * wrong and we can't enable DMA for the device. + */ + if (WARN_ON(!pe)) + return; + } else { + pci_info(pdev, "Added to existing PE#%x\n", pe->pe_number); + } + + /* + * We assume that bridges *probably* don't need to do any DMA so we can + * skip allocating a TCE table, etc unless we get a non-bridge device. + */ + if (!pe->dma_setup_done && !pci_is_bridge(pdev)) { + switch (phb->type) { + case PNV_PHB_IODA1: + pnv_pci_ioda1_setup_dma_pe(phb, pe); + break; + case PNV_PHB_IODA2: + pnv_pci_ioda2_setup_dma_pe(phb, pe); + break; + default: + pr_warn("%s: No DMA for PHB#%x (type %d)\n", + __func__, phb->hose->global_number, phb->type); + } + } + + if (pdn) + pdn->pe_number = pe->pe_number; + pe->device_count++; + + WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops); + pdev->dev.archdata.dma_offset = pe->tce_bypass_base; + set_iommu_table_base(&pdev->dev, pe->table_group.tables[0]); + + /* PEs with a DMA weight of zero won't have a group */ + if (pe->table_group.group) + iommu_add_device(&pe->table_group, &pdev->dev); +} + +/* + * Reconfigure TVE#0 to be usable as 64-bit DMA space. + * + * The first 4GB of virtual memory for a PE is reserved for 32-bit accesses. + * Devices can only access more than that if bit 59 of the PCI address is set + * by hardware, which indicates TVE#1 should be used instead of TVE#0. + * Many PCI devices are not capable of addressing that many bits, and as a + * result are limited to the 4GB of virtual memory made available to 32-bit + * devices in TVE#0. + * + * In order to work around this, reconfigure TVE#0 to be suitable for 64-bit + * devices by configuring the virtual memory past the first 4GB inaccessible + * by 64-bit DMAs. This should only be used by devices that want more than + * 4GB, and only on PEs that have no 32-bit devices. + * + * Currently this will only work on PHB3 (POWER8). + */ +static int pnv_pci_ioda_dma_64bit_bypass(struct pnv_ioda_pe *pe) +{ + u64 window_size, table_size, tce_count, addr; + struct page *table_pages; + u64 tce_order = 28; /* 256MB TCEs */ + __be64 *tces; + s64 rc; + + /* + * Window size needs to be a power of two, but needs to account for + * shifting memory by the 4GB offset required to skip 32bit space. + */ + window_size = roundup_pow_of_two(memory_hotplug_max() + (1ULL << 32)); + tce_count = window_size >> tce_order; + table_size = tce_count << 3; + + if (table_size < PAGE_SIZE) + table_size = PAGE_SIZE; + + table_pages = alloc_pages_node(pe->phb->hose->node, GFP_KERNEL, + get_order(table_size)); + if (!table_pages) + goto err; + + tces = page_address(table_pages); + if (!tces) + goto err; + + memset(tces, 0, table_size); + + for (addr = 0; addr < memory_hotplug_max(); addr += (1 << tce_order)) { + tces[(addr + (1ULL << 32)) >> tce_order] = + cpu_to_be64(addr | TCE_PCI_READ | TCE_PCI_WRITE); + } + + rc = opal_pci_map_pe_dma_window(pe->phb->opal_id, + pe->pe_number, + /* reconfigure window 0 */ + (pe->pe_number << 1) + 0, + 1, + __pa(tces), + table_size, + 1 << tce_order); + if (rc == OPAL_SUCCESS) { + pe_info(pe, "Using 64-bit DMA iommu bypass (through TVE#0)\n"); + return 0; + } +err: + pe_err(pe, "Error configuring 64-bit DMA bypass\n"); + return -EIO; +} + +static bool pnv_pci_ioda_iommu_bypass_supported(struct pci_dev *pdev, + u64 dma_mask) +{ + struct pnv_phb *phb = pci_bus_to_pnvhb(pdev->bus); + struct pci_dn *pdn = pci_get_pdn(pdev); + struct pnv_ioda_pe *pe; + + if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE)) + return false; + + pe = &phb->ioda.pe_array[pdn->pe_number]; + if (pe->tce_bypass_enabled) { + u64 top = pe->tce_bypass_base + memblock_end_of_DRAM() - 1; + if (dma_mask >= top) + return true; + } + + /* + * If the device can't set the TCE bypass bit but still wants + * to access 4GB or more, on PHB3 we can reconfigure TVE#0 to + * bypass the 32-bit region and be usable for 64-bit DMAs. + * The device needs to be able to address all of this space. + */ + if (dma_mask >> 32 && + dma_mask > (memory_hotplug_max() + (1ULL << 32)) && + /* pe->pdev should be set if it's a single device, pe->pbus if not */ + (pe->device_count == 1 || !pe->pbus) && + phb->model == PNV_PHB_MODEL_PHB3) { + /* Configure the bypass mode */ + s64 rc = pnv_pci_ioda_dma_64bit_bypass(pe); + if (rc) + return false; + /* 4GB offset bypasses 32-bit space */ + pdev->dev.archdata.dma_offset = (1ULL << 32); + return true; + } + + return false; +} + +static inline __be64 __iomem *pnv_ioda_get_inval_reg(struct pnv_phb *phb) +{ + return phb->regs + 0x210; +} + +static void pnv_pci_p7ioc_tce_invalidate(struct iommu_table *tbl, + unsigned long index, unsigned long npages) +{ + struct iommu_table_group_link *tgl = list_first_entry_or_null( + &tbl->it_group_list, struct iommu_table_group_link, + next); + struct pnv_ioda_pe *pe = container_of(tgl->table_group, + struct pnv_ioda_pe, table_group); + __be64 __iomem *invalidate = pnv_ioda_get_inval_reg(pe->phb); + unsigned long start, end, inc; + + start = __pa(((__be64 *)tbl->it_base) + index - tbl->it_offset); + end = __pa(((__be64 *)tbl->it_base) + index - tbl->it_offset + + npages - 1); + + /* p7ioc-style invalidation, 2 TCEs per write */ + start |= (1ull << 63); + end |= (1ull << 63); + inc = 16; + end |= inc - 1; /* round up end to be different than start */ + + mb(); /* Ensure above stores are visible */ + while (start <= end) { + __raw_writeq_be(start, invalidate); + start += inc; + } + + /* + * The iommu layer will do another mb() for us on build() + * and we don't care on free() + */ +} + +static int pnv_ioda1_tce_build(struct iommu_table *tbl, long index, + long npages, unsigned long uaddr, + enum dma_data_direction direction, + unsigned long attrs) +{ + int ret = pnv_tce_build(tbl, index, npages, uaddr, direction, + attrs); + + if (!ret) + pnv_pci_p7ioc_tce_invalidate(tbl, index, npages); + + return ret; +} + +#ifdef CONFIG_IOMMU_API +/* Common for IODA1 and IODA2 */ +static int pnv_ioda_tce_xchg_no_kill(struct iommu_table *tbl, long index, + unsigned long *hpa, enum dma_data_direction *direction) +{ + return pnv_tce_xchg(tbl, index, hpa, direction); +} +#endif + +static void pnv_ioda1_tce_free(struct iommu_table *tbl, long index, + long npages) +{ + pnv_tce_free(tbl, index, npages); + + pnv_pci_p7ioc_tce_invalidate(tbl, index, npages); +} + +static struct iommu_table_ops pnv_ioda1_iommu_ops = { + .set = pnv_ioda1_tce_build, +#ifdef CONFIG_IOMMU_API + .xchg_no_kill = pnv_ioda_tce_xchg_no_kill, + .tce_kill = pnv_pci_p7ioc_tce_invalidate, + .useraddrptr = pnv_tce_useraddrptr, +#endif + .clear = pnv_ioda1_tce_free, + .get = pnv_tce_get, +}; + +#define PHB3_TCE_KILL_INVAL_ALL PPC_BIT(0) +#define PHB3_TCE_KILL_INVAL_PE PPC_BIT(1) +#define PHB3_TCE_KILL_INVAL_ONE PPC_BIT(2) + +static inline void pnv_pci_phb3_tce_invalidate_pe(struct pnv_ioda_pe *pe) +{ + /* 01xb - invalidate TCEs that match the specified PE# */ + __be64 __iomem *invalidate = pnv_ioda_get_inval_reg(pe->phb); + unsigned long val = PHB3_TCE_KILL_INVAL_PE | (pe->pe_number & 0xFF); + + mb(); /* Ensure above stores are visible */ + __raw_writeq_be(val, invalidate); +} + +static void pnv_pci_phb3_tce_invalidate(struct pnv_ioda_pe *pe, + unsigned shift, unsigned long index, + unsigned long npages) +{ + __be64 __iomem *invalidate = pnv_ioda_get_inval_reg(pe->phb); + unsigned long start, end, inc; + + /* We'll invalidate DMA address in PE scope */ + start = PHB3_TCE_KILL_INVAL_ONE; + start |= (pe->pe_number & 0xFF); + end = start; + + /* Figure out the start, end and step */ + start |= (index << shift); + end |= ((index + npages - 1) << shift); + inc = (0x1ull << shift); + mb(); + + while (start <= end) { + __raw_writeq_be(start, invalidate); + start += inc; + } +} + +static inline void pnv_pci_ioda2_tce_invalidate_pe(struct pnv_ioda_pe *pe) +{ + struct pnv_phb *phb = pe->phb; + + if (phb->model == PNV_PHB_MODEL_PHB3 && phb->regs) + pnv_pci_phb3_tce_invalidate_pe(pe); + else + opal_pci_tce_kill(phb->opal_id, OPAL_PCI_TCE_KILL_PE, + pe->pe_number, 0, 0, 0); +} + +static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl, + unsigned long index, unsigned long npages) +{ + struct iommu_table_group_link *tgl; + + list_for_each_entry_lockless(tgl, &tbl->it_group_list, next) { + struct pnv_ioda_pe *pe = container_of(tgl->table_group, + struct pnv_ioda_pe, table_group); + struct pnv_phb *phb = pe->phb; + unsigned int shift = tbl->it_page_shift; + + if (phb->model == PNV_PHB_MODEL_PHB3 && phb->regs) + pnv_pci_phb3_tce_invalidate(pe, shift, + index, npages); + else + opal_pci_tce_kill(phb->opal_id, + OPAL_PCI_TCE_KILL_PAGES, + pe->pe_number, 1u << shift, + index << shift, npages); + } +} + +static int pnv_ioda2_tce_build(struct iommu_table *tbl, long index, + long npages, unsigned long uaddr, + enum dma_data_direction direction, + unsigned long attrs) +{ + int ret = pnv_tce_build(tbl, index, npages, uaddr, direction, + attrs); + + if (!ret) + pnv_pci_ioda2_tce_invalidate(tbl, index, npages); + + return ret; +} + +static void pnv_ioda2_tce_free(struct iommu_table *tbl, long index, + long npages) +{ + pnv_tce_free(tbl, index, npages); + + pnv_pci_ioda2_tce_invalidate(tbl, index, npages); +} + +static struct iommu_table_ops pnv_ioda2_iommu_ops = { + .set = pnv_ioda2_tce_build, +#ifdef CONFIG_IOMMU_API + .xchg_no_kill = pnv_ioda_tce_xchg_no_kill, + .tce_kill = pnv_pci_ioda2_tce_invalidate, + .useraddrptr = pnv_tce_useraddrptr, +#endif + .clear = pnv_ioda2_tce_free, + .get = pnv_tce_get, + .free = pnv_pci_ioda2_table_free_pages, +}; + +static int pnv_pci_ioda_dev_dma_weight(struct pci_dev *dev, void *data) +{ + unsigned int *weight = (unsigned int *)data; + + /* This is quite simplistic. The "base" weight of a device + * is 10. 0 means no DMA is to be accounted for it. + */ + if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL) + return 0; + + if (dev->class == PCI_CLASS_SERIAL_USB_UHCI || + dev->class == PCI_CLASS_SERIAL_USB_OHCI || + dev->class == PCI_CLASS_SERIAL_USB_EHCI) + *weight += 3; + else if ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID) + *weight += 15; + else + *weight += 10; + + return 0; +} + +static unsigned int pnv_pci_ioda_pe_dma_weight(struct pnv_ioda_pe *pe) +{ + unsigned int weight = 0; + + /* SRIOV VF has same DMA32 weight as its PF */ +#ifdef CONFIG_PCI_IOV + if ((pe->flags & PNV_IODA_PE_VF) && pe->parent_dev) { + pnv_pci_ioda_dev_dma_weight(pe->parent_dev, &weight); + return weight; + } +#endif + + if ((pe->flags & PNV_IODA_PE_DEV) && pe->pdev) { + pnv_pci_ioda_dev_dma_weight(pe->pdev, &weight); + } else if ((pe->flags & PNV_IODA_PE_BUS) && pe->pbus) { + struct pci_dev *pdev; + + list_for_each_entry(pdev, &pe->pbus->devices, bus_list) + pnv_pci_ioda_dev_dma_weight(pdev, &weight); + } else if ((pe->flags & PNV_IODA_PE_BUS_ALL) && pe->pbus) { + pci_walk_bus(pe->pbus, pnv_pci_ioda_dev_dma_weight, &weight); + } + + return weight; +} + +static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb, + struct pnv_ioda_pe *pe) +{ + + struct page *tce_mem = NULL; + struct iommu_table *tbl; + unsigned int weight, total_weight = 0; + unsigned int tce32_segsz, base, segs, avail, i; + int64_t rc; + void *addr; + + /* XXX FIXME: Handle 64-bit only DMA devices */ + /* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */ + /* XXX FIXME: Allocate multi-level tables on PHB3 */ + weight = pnv_pci_ioda_pe_dma_weight(pe); + if (!weight) + return; + + pci_walk_bus(phb->hose->bus, pnv_pci_ioda_dev_dma_weight, + &total_weight); + segs = (weight * phb->ioda.dma32_count) / total_weight; + if (!segs) + segs = 1; + + /* + * Allocate contiguous DMA32 segments. We begin with the expected + * number of segments. With one more attempt, the number of DMA32 + * segments to be allocated is decreased by one until one segment + * is allocated successfully. + */ + do { + for (base = 0; base <= phb->ioda.dma32_count - segs; base++) { + for (avail = 0, i = base; i < base + segs; i++) { + if (phb->ioda.dma32_segmap[i] == + IODA_INVALID_PE) + avail++; + } + + if (avail == segs) + goto found; + } + } while (--segs); + + if (!segs) { + pe_warn(pe, "No available DMA32 segments\n"); + return; + } + +found: + tbl = pnv_pci_table_alloc(phb->hose->node); + if (WARN_ON(!tbl)) + return; + + iommu_register_group(&pe->table_group, phb->hose->global_number, + pe->pe_number); + pnv_pci_link_table_and_group(phb->hose->node, 0, tbl, &pe->table_group); + + /* Grab a 32-bit TCE table */ + pe_info(pe, "DMA weight %d (%d), assigned (%d) %d DMA32 segments\n", + weight, total_weight, base, segs); + pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n", + base * PNV_IODA1_DMA32_SEGSIZE, + (base + segs) * PNV_IODA1_DMA32_SEGSIZE - 1); + + /* XXX Currently, we allocate one big contiguous table for the + * TCEs. We only really need one chunk per 256M of TCE space + * (ie per segment) but that's an optimization for later, it + * requires some added smarts with our get/put_tce implementation + * + * Each TCE page is 4KB in size and each TCE entry occupies 8 + * bytes + */ + tce32_segsz = PNV_IODA1_DMA32_SEGSIZE >> (IOMMU_PAGE_SHIFT_4K - 3); + tce_mem = alloc_pages_node(phb->hose->node, GFP_KERNEL, + get_order(tce32_segsz * segs)); + if (!tce_mem) { + pe_err(pe, " Failed to allocate a 32-bit TCE memory\n"); + goto fail; + } + addr = page_address(tce_mem); + memset(addr, 0, tce32_segsz * segs); + + /* Configure HW */ + for (i = 0; i < segs; i++) { + rc = opal_pci_map_pe_dma_window(phb->opal_id, + pe->pe_number, + base + i, 1, + __pa(addr) + tce32_segsz * i, + tce32_segsz, IOMMU_PAGE_SIZE_4K); + if (rc) { + pe_err(pe, " Failed to configure 32-bit TCE table, err %lld\n", + rc); + goto fail; + } + } + + /* Setup DMA32 segment mapping */ + for (i = base; i < base + segs; i++) + phb->ioda.dma32_segmap[i] = pe->pe_number; + + /* Setup linux iommu table */ + pnv_pci_setup_iommu_table(tbl, addr, tce32_segsz * segs, + base * PNV_IODA1_DMA32_SEGSIZE, + IOMMU_PAGE_SHIFT_4K); + + tbl->it_ops = &pnv_ioda1_iommu_ops; + pe->table_group.tce32_start = tbl->it_offset << tbl->it_page_shift; + pe->table_group.tce32_size = tbl->it_size << tbl->it_page_shift; + tbl->it_index = (phb->hose->global_number << 16) | pe->pe_number; + if (!iommu_init_table(tbl, phb->hose->node, 0, 0)) + panic("Failed to initialize iommu table"); + + pe->dma_setup_done = true; + return; + fail: + /* XXX Failure: Try to fallback to 64-bit only ? */ + if (tce_mem) + __free_pages(tce_mem, get_order(tce32_segsz * segs)); + if (tbl) { + pnv_pci_unlink_table_and_group(tbl, &pe->table_group); + iommu_tce_table_put(tbl); + } +} + +static long pnv_pci_ioda2_set_window(struct iommu_table_group *table_group, + int num, struct iommu_table *tbl) +{ + struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe, + table_group); + struct pnv_phb *phb = pe->phb; + int64_t rc; + const unsigned long size = tbl->it_indirect_levels ? + tbl->it_level_size : tbl->it_size; + const __u64 start_addr = tbl->it_offset << tbl->it_page_shift; + const __u64 win_size = tbl->it_size << tbl->it_page_shift; + + pe_info(pe, "Setting up window#%d %llx..%llx pg=%lx\n", + num, start_addr, start_addr + win_size - 1, + IOMMU_PAGE_SIZE(tbl)); + + /* + * Map TCE table through TVT. The TVE index is the PE number + * shifted by 1 bit for 32-bits DMA space. + */ + rc = opal_pci_map_pe_dma_window(phb->opal_id, + pe->pe_number, + (pe->pe_number << 1) + num, + tbl->it_indirect_levels + 1, + __pa(tbl->it_base), + size << 3, + IOMMU_PAGE_SIZE(tbl)); + if (rc) { + pe_err(pe, "Failed to configure TCE table, err %lld\n", rc); + return rc; + } + + pnv_pci_link_table_and_group(phb->hose->node, num, + tbl, &pe->table_group); + pnv_pci_ioda2_tce_invalidate_pe(pe); + + return 0; +} + +static void pnv_pci_ioda2_set_bypass(struct pnv_ioda_pe *pe, bool enable) +{ + uint16_t window_id = (pe->pe_number << 1 ) + 1; + int64_t rc; + + pe_info(pe, "%sabling 64-bit DMA bypass\n", enable ? "En" : "Dis"); + if (enable) { + phys_addr_t top = memblock_end_of_DRAM(); + + top = roundup_pow_of_two(top); + rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id, + pe->pe_number, + window_id, + pe->tce_bypass_base, + top); + } else { + rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id, + pe->pe_number, + window_id, + pe->tce_bypass_base, + 0); + } + if (rc) + pe_err(pe, "OPAL error %lld configuring bypass window\n", rc); + else + pe->tce_bypass_enabled = enable; +} + +static long pnv_pci_ioda2_create_table(struct iommu_table_group *table_group, + int num, __u32 page_shift, __u64 window_size, __u32 levels, + bool alloc_userspace_copy, struct iommu_table **ptbl) +{ + struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe, + table_group); + int nid = pe->phb->hose->node; + __u64 bus_offset = num ? pe->tce_bypass_base : table_group->tce32_start; + long ret; + struct iommu_table *tbl; + + tbl = pnv_pci_table_alloc(nid); + if (!tbl) + return -ENOMEM; + + tbl->it_ops = &pnv_ioda2_iommu_ops; + + ret = pnv_pci_ioda2_table_alloc_pages(nid, + bus_offset, page_shift, window_size, + levels, alloc_userspace_copy, tbl); + if (ret) { + iommu_tce_table_put(tbl); + return ret; + } + + *ptbl = tbl; + + return 0; +} + +static long pnv_pci_ioda2_setup_default_config(struct pnv_ioda_pe *pe) +{ + struct iommu_table *tbl = NULL; + long rc; + unsigned long res_start, res_end; + + /* + * crashkernel= specifies the kdump kernel's maximum memory at + * some offset and there is no guaranteed the result is a power + * of 2, which will cause errors later. + */ + const u64 max_memory = __rounddown_pow_of_two(memory_hotplug_max()); + + /* + * In memory constrained environments, e.g. kdump kernel, the + * DMA window can be larger than available memory, which will + * cause errors later. + */ + const u64 maxblock = 1UL << (PAGE_SHIFT + MAX_ORDER - 1); + + /* + * We create the default window as big as we can. The constraint is + * the max order of allocation possible. The TCE table is likely to + * end up being multilevel and with on-demand allocation in place, + * the initial use is not going to be huge as the default window aims + * to support crippled devices (i.e. not fully 64bit DMAble) only. + */ + /* iommu_table::it_map uses 1 bit per IOMMU page, hence 8 */ + const u64 window_size = min((maxblock * 8) << PAGE_SHIFT, max_memory); + /* Each TCE level cannot exceed maxblock so go multilevel if needed */ + unsigned long tces_order = ilog2(window_size >> PAGE_SHIFT); + unsigned long tcelevel_order = ilog2(maxblock >> 3); + unsigned int levels = tces_order / tcelevel_order; + + if (tces_order % tcelevel_order) + levels += 1; + /* + * We try to stick to default levels (which is >1 at the moment) in + * order to save memory by relying on on-demain TCE level allocation. + */ + levels = max_t(unsigned int, levels, POWERNV_IOMMU_DEFAULT_LEVELS); + + rc = pnv_pci_ioda2_create_table(&pe->table_group, 0, PAGE_SHIFT, + window_size, levels, false, &tbl); + if (rc) { + pe_err(pe, "Failed to create 32-bit TCE table, err %ld", + rc); + return rc; + } + + /* We use top part of 32bit space for MMIO so exclude it from DMA */ + res_start = 0; + res_end = 0; + if (window_size > pe->phb->ioda.m32_pci_base) { + res_start = pe->phb->ioda.m32_pci_base >> tbl->it_page_shift; + res_end = min(window_size, SZ_4G) >> tbl->it_page_shift; + } + + tbl->it_index = (pe->phb->hose->global_number << 16) | pe->pe_number; + if (iommu_init_table(tbl, pe->phb->hose->node, res_start, res_end)) + rc = pnv_pci_ioda2_set_window(&pe->table_group, 0, tbl); + else + rc = -ENOMEM; + if (rc) { + pe_err(pe, "Failed to configure 32-bit TCE table, err %ld\n", rc); + iommu_tce_table_put(tbl); + tbl = NULL; /* This clears iommu_table_base below */ + } + if (!pnv_iommu_bypass_disabled) + pnv_pci_ioda2_set_bypass(pe, true); + + /* + * Set table base for the case of IOMMU DMA use. Usually this is done + * from dma_dev_setup() which is not called when a device is returned + * from VFIO so do it here. + */ + if (pe->pdev) + set_iommu_table_base(&pe->pdev->dev, tbl); + + return 0; +} + +static long pnv_pci_ioda2_unset_window(struct iommu_table_group *table_group, + int num) +{ + struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe, + table_group); + struct pnv_phb *phb = pe->phb; + long ret; + + pe_info(pe, "Removing DMA window #%d\n", num); + + ret = opal_pci_map_pe_dma_window(phb->opal_id, pe->pe_number, + (pe->pe_number << 1) + num, + 0/* levels */, 0/* table address */, + 0/* table size */, 0/* page size */); + if (ret) + pe_warn(pe, "Unmapping failed, ret = %ld\n", ret); + else + pnv_pci_ioda2_tce_invalidate_pe(pe); + + pnv_pci_unlink_table_and_group(table_group->tables[num], table_group); + + return ret; +} + +#ifdef CONFIG_IOMMU_API +unsigned long pnv_pci_ioda2_get_table_size(__u32 page_shift, + __u64 window_size, __u32 levels) +{ + unsigned long bytes = 0; + const unsigned window_shift = ilog2(window_size); + unsigned entries_shift = window_shift - page_shift; + unsigned table_shift = entries_shift + 3; + unsigned long tce_table_size = max(0x1000UL, 1UL << table_shift); + unsigned long direct_table_size; + + if (!levels || (levels > POWERNV_IOMMU_MAX_LEVELS) || + !is_power_of_2(window_size)) + return 0; + + /* Calculate a direct table size from window_size and levels */ + entries_shift = (entries_shift + levels - 1) / levels; + table_shift = entries_shift + 3; + table_shift = max_t(unsigned, table_shift, PAGE_SHIFT); + direct_table_size = 1UL << table_shift; + + for ( ; levels; --levels) { + bytes += ALIGN(tce_table_size, direct_table_size); + + tce_table_size /= direct_table_size; + tce_table_size <<= 3; + tce_table_size = max_t(unsigned long, + tce_table_size, direct_table_size); + } + + return bytes + bytes; /* one for HW table, one for userspace copy */ +} + +static long pnv_pci_ioda2_create_table_userspace( + struct iommu_table_group *table_group, + int num, __u32 page_shift, __u64 window_size, __u32 levels, + struct iommu_table **ptbl) +{ + long ret = pnv_pci_ioda2_create_table(table_group, + num, page_shift, window_size, levels, true, ptbl); + + if (!ret) + (*ptbl)->it_allocated_size = pnv_pci_ioda2_get_table_size( + page_shift, window_size, levels); + return ret; +} + +static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + set_iommu_table_base(&dev->dev, pe->table_group.tables[0]); + dev->dev.archdata.dma_offset = pe->tce_bypass_base; + + if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate) + pnv_ioda_setup_bus_dma(pe, dev->subordinate); + } +} + +static void pnv_ioda2_take_ownership(struct iommu_table_group *table_group) +{ + struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe, + table_group); + /* Store @tbl as pnv_pci_ioda2_unset_window() resets it */ + struct iommu_table *tbl = pe->table_group.tables[0]; + + pnv_pci_ioda2_set_bypass(pe, false); + pnv_pci_ioda2_unset_window(&pe->table_group, 0); + if (pe->pbus) + pnv_ioda_setup_bus_dma(pe, pe->pbus); + else if (pe->pdev) + set_iommu_table_base(&pe->pdev->dev, NULL); + iommu_tce_table_put(tbl); +} + +static void pnv_ioda2_release_ownership(struct iommu_table_group *table_group) +{ + struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe, + table_group); + + pnv_pci_ioda2_setup_default_config(pe); + if (pe->pbus) + pnv_ioda_setup_bus_dma(pe, pe->pbus); +} + +static struct iommu_table_group_ops pnv_pci_ioda2_ops = { + .get_table_size = pnv_pci_ioda2_get_table_size, + .create_table = pnv_pci_ioda2_create_table_userspace, + .set_window = pnv_pci_ioda2_set_window, + .unset_window = pnv_pci_ioda2_unset_window, + .take_ownership = pnv_ioda2_take_ownership, + .release_ownership = pnv_ioda2_release_ownership, +}; +#endif + +void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, + struct pnv_ioda_pe *pe) +{ + int64_t rc; + + /* TVE #1 is selected by PCI address bit 59 */ + pe->tce_bypass_base = 1ull << 59; + + /* The PE will reserve all possible 32-bits space */ + pe_info(pe, "Setting up 32-bit TCE table at 0..%08x\n", + phb->ioda.m32_pci_base); + + /* Setup linux iommu table */ + pe->table_group.tce32_start = 0; + pe->table_group.tce32_size = phb->ioda.m32_pci_base; + pe->table_group.max_dynamic_windows_supported = + IOMMU_TABLE_GROUP_MAX_TABLES; + pe->table_group.max_levels = POWERNV_IOMMU_MAX_LEVELS; + pe->table_group.pgsizes = pnv_ioda_parse_tce_sizes(phb); + + rc = pnv_pci_ioda2_setup_default_config(pe); + if (rc) + return; + +#ifdef CONFIG_IOMMU_API + pe->table_group.ops = &pnv_pci_ioda2_ops; + iommu_register_group(&pe->table_group, phb->hose->global_number, + pe->pe_number); +#endif + pe->dma_setup_done = true; +} + +/* + * Called from KVM in real mode to EOI passthru interrupts. The ICP + * EOI is handled directly in KVM in kvmppc_deliver_irq_passthru(). + * + * The IRQ data is mapped in the PCI-MSI domain and the EOI OPAL call + * needs an HW IRQ number mapped in the XICS IRQ domain. The HW IRQ + * numbers of the in-the-middle MSI domain are vector numbers and it's + * good enough for OPAL. Use that. + */ +int64_t pnv_opal_pci_msi_eoi(struct irq_data *d) +{ + struct pci_controller *hose = irq_data_get_irq_chip_data(d->parent_data); + struct pnv_phb *phb = hose->private_data; + + return opal_pci_msi_eoi(phb->opal_id, d->parent_data->hwirq); +} + +/* + * The IRQ data is mapped in the XICS domain, with OPAL HW IRQ numbers + */ +static void pnv_ioda2_msi_eoi(struct irq_data *d) +{ + int64_t rc; + unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d); + struct pci_controller *hose = irq_data_get_irq_chip_data(d); + struct pnv_phb *phb = hose->private_data; + + rc = opal_pci_msi_eoi(phb->opal_id, hw_irq); + WARN_ON_ONCE(rc); + + icp_native_eoi(d); +} + +/* P8/CXL only */ +void pnv_set_msi_irq_chip(struct pnv_phb *phb, unsigned int virq) +{ + struct irq_data *idata; + struct irq_chip *ichip; + + /* The MSI EOI OPAL call is only needed on PHB3 */ + if (phb->model != PNV_PHB_MODEL_PHB3) + return; + + if (!phb->ioda.irq_chip_init) { + /* + * First time we setup an MSI IRQ, we need to setup the + * corresponding IRQ chip to route correctly. + */ + idata = irq_get_irq_data(virq); + ichip = irq_data_get_irq_chip(idata); + phb->ioda.irq_chip_init = 1; + phb->ioda.irq_chip = *ichip; + phb->ioda.irq_chip.irq_eoi = pnv_ioda2_msi_eoi; + } + irq_set_chip(virq, &phb->ioda.irq_chip); + irq_set_chip_data(virq, phb->hose); +} + +static struct irq_chip pnv_pci_msi_irq_chip; + +/* + * Returns true iff chip is something that we could call + * pnv_opal_pci_msi_eoi for. + */ +bool is_pnv_opal_msi(struct irq_chip *chip) +{ + return chip == &pnv_pci_msi_irq_chip; +} +EXPORT_SYMBOL_GPL(is_pnv_opal_msi); + +static int __pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev, + unsigned int xive_num, + unsigned int is_64, struct msi_msg *msg) +{ + struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev); + __be32 data; + int rc; + + dev_dbg(&dev->dev, "%s: setup %s-bit MSI for vector #%d\n", __func__, + is_64 ? "64" : "32", xive_num); + + /* No PE assigned ? bail out ... no MSI for you ! */ + if (pe == NULL) + return -ENXIO; + + /* Check if we have an MVE */ + if (pe->mve_number < 0) + return -ENXIO; + + /* Force 32-bit MSI on some broken devices */ + if (dev->no_64bit_msi) + is_64 = 0; + + /* Assign XIVE to PE */ + rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num); + if (rc) { + pr_warn("%s: OPAL error %d setting XIVE %d PE\n", + pci_name(dev), rc, xive_num); + return -EIO; + } + + if (is_64) { + __be64 addr64; + + rc = opal_get_msi_64(phb->opal_id, pe->mve_number, xive_num, 1, + &addr64, &data); + if (rc) { + pr_warn("%s: OPAL error %d getting 64-bit MSI data\n", + pci_name(dev), rc); + return -EIO; + } + msg->address_hi = be64_to_cpu(addr64) >> 32; + msg->address_lo = be64_to_cpu(addr64) & 0xfffffffful; + } else { + __be32 addr32; + + rc = opal_get_msi_32(phb->opal_id, pe->mve_number, xive_num, 1, + &addr32, &data); + if (rc) { + pr_warn("%s: OPAL error %d getting 32-bit MSI data\n", + pci_name(dev), rc); + return -EIO; + } + msg->address_hi = 0; + msg->address_lo = be32_to_cpu(addr32); + } + msg->data = be32_to_cpu(data); + + return 0; +} + +/* + * The msi_free() op is called before irq_domain_free_irqs_top() when + * the handler data is still available. Use that to clear the XIVE + * controller. + */ +static void pnv_msi_ops_msi_free(struct irq_domain *domain, + struct msi_domain_info *info, + unsigned int irq) +{ + if (xive_enabled()) + xive_irq_free_data(irq); +} + +static struct msi_domain_ops pnv_pci_msi_domain_ops = { + .msi_free = pnv_msi_ops_msi_free, +}; + +static void pnv_msi_shutdown(struct irq_data *d) +{ + d = d->parent_data; + if (d->chip->irq_shutdown) + d->chip->irq_shutdown(d); +} + +static void pnv_msi_mask(struct irq_data *d) +{ + pci_msi_mask_irq(d); + irq_chip_mask_parent(d); +} + +static void pnv_msi_unmask(struct irq_data *d) +{ + pci_msi_unmask_irq(d); + irq_chip_unmask_parent(d); +} + +static struct irq_chip pnv_pci_msi_irq_chip = { + .name = "PNV-PCI-MSI", + .irq_shutdown = pnv_msi_shutdown, + .irq_mask = pnv_msi_mask, + .irq_unmask = pnv_msi_unmask, + .irq_eoi = irq_chip_eoi_parent, +}; + +static struct msi_domain_info pnv_msi_domain_info = { + .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | + MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX), + .ops = &pnv_pci_msi_domain_ops, + .chip = &pnv_pci_msi_irq_chip, +}; + +static void pnv_msi_compose_msg(struct irq_data *d, struct msi_msg *msg) +{ + struct msi_desc *entry = irq_data_get_msi_desc(d); + struct pci_dev *pdev = msi_desc_to_pci_dev(entry); + struct pci_controller *hose = irq_data_get_irq_chip_data(d); + struct pnv_phb *phb = hose->private_data; + int rc; + + rc = __pnv_pci_ioda_msi_setup(phb, pdev, d->hwirq, + entry->pci.msi_attrib.is_64, msg); + if (rc) + dev_err(&pdev->dev, "Failed to setup %s-bit MSI #%ld : %d\n", + entry->pci.msi_attrib.is_64 ? "64" : "32", d->hwirq, rc); +} + +/* + * The IRQ data is mapped in the MSI domain in which HW IRQ numbers + * correspond to vector numbers. + */ +static void pnv_msi_eoi(struct irq_data *d) +{ + struct pci_controller *hose = irq_data_get_irq_chip_data(d); + struct pnv_phb *phb = hose->private_data; + + if (phb->model == PNV_PHB_MODEL_PHB3) { + /* + * The EOI OPAL call takes an OPAL HW IRQ number but + * since it is translated into a vector number in + * OPAL, use that directly. + */ + WARN_ON_ONCE(opal_pci_msi_eoi(phb->opal_id, d->hwirq)); + } + + irq_chip_eoi_parent(d); +} + +static struct irq_chip pnv_msi_irq_chip = { + .name = "PNV-MSI", + .irq_shutdown = pnv_msi_shutdown, + .irq_mask = irq_chip_mask_parent, + .irq_unmask = irq_chip_unmask_parent, + .irq_eoi = pnv_msi_eoi, + .irq_set_affinity = irq_chip_set_affinity_parent, + .irq_compose_msi_msg = pnv_msi_compose_msg, +}; + +static int pnv_irq_parent_domain_alloc(struct irq_domain *domain, + unsigned int virq, int hwirq) +{ + struct irq_fwspec parent_fwspec; + int ret; + + parent_fwspec.fwnode = domain->parent->fwnode; + parent_fwspec.param_count = 2; + parent_fwspec.param[0] = hwirq; + parent_fwspec.param[1] = IRQ_TYPE_EDGE_RISING; + + ret = irq_domain_alloc_irqs_parent(domain, virq, 1, &parent_fwspec); + if (ret) + return ret; + + return 0; +} + +static int pnv_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs, void *arg) +{ + struct pci_controller *hose = domain->host_data; + struct pnv_phb *phb = hose->private_data; + msi_alloc_info_t *info = arg; + struct pci_dev *pdev = msi_desc_to_pci_dev(info->desc); + int hwirq; + int i, ret; + + hwirq = msi_bitmap_alloc_hwirqs(&phb->msi_bmp, nr_irqs); + if (hwirq < 0) { + dev_warn(&pdev->dev, "failed to find a free MSI\n"); + return -ENOSPC; + } + + dev_dbg(&pdev->dev, "%s bridge %pOF %d/%x #%d\n", __func__, + hose->dn, virq, hwirq, nr_irqs); + + for (i = 0; i < nr_irqs; i++) { + ret = pnv_irq_parent_domain_alloc(domain, virq + i, + phb->msi_base + hwirq + i); + if (ret) + goto out; + + irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i, + &pnv_msi_irq_chip, hose); + } + + return 0; + +out: + irq_domain_free_irqs_parent(domain, virq, i - 1); + msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq, nr_irqs); + return ret; +} + +static void pnv_irq_domain_free(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs) +{ + struct irq_data *d = irq_domain_get_irq_data(domain, virq); + struct pci_controller *hose = irq_data_get_irq_chip_data(d); + struct pnv_phb *phb = hose->private_data; + + pr_debug("%s bridge %pOF %d/%lx #%d\n", __func__, hose->dn, + virq, d->hwirq, nr_irqs); + + msi_bitmap_free_hwirqs(&phb->msi_bmp, d->hwirq, nr_irqs); + /* XIVE domain is cleared through ->msi_free() */ +} + +static const struct irq_domain_ops pnv_irq_domain_ops = { + .alloc = pnv_irq_domain_alloc, + .free = pnv_irq_domain_free, +}; + +static int __init pnv_msi_allocate_domains(struct pci_controller *hose, unsigned int count) +{ + struct pnv_phb *phb = hose->private_data; + struct irq_domain *parent = irq_get_default_host(); + + hose->fwnode = irq_domain_alloc_named_id_fwnode("PNV-MSI", phb->opal_id); + if (!hose->fwnode) + return -ENOMEM; + + hose->dev_domain = irq_domain_create_hierarchy(parent, 0, count, + hose->fwnode, + &pnv_irq_domain_ops, hose); + if (!hose->dev_domain) { + pr_err("PCI: failed to create IRQ domain bridge %pOF (domain %d)\n", + hose->dn, hose->global_number); + irq_domain_free_fwnode(hose->fwnode); + return -ENOMEM; + } + + hose->msi_domain = pci_msi_create_irq_domain(of_node_to_fwnode(hose->dn), + &pnv_msi_domain_info, + hose->dev_domain); + if (!hose->msi_domain) { + pr_err("PCI: failed to create MSI IRQ domain bridge %pOF (domain %d)\n", + hose->dn, hose->global_number); + irq_domain_free_fwnode(hose->fwnode); + irq_domain_remove(hose->dev_domain); + return -ENOMEM; + } + + return 0; +} + +static void __init pnv_pci_init_ioda_msis(struct pnv_phb *phb) +{ + unsigned int count; + const __be32 *prop = of_get_property(phb->hose->dn, + "ibm,opal-msi-ranges", NULL); + if (!prop) { + /* BML Fallback */ + prop = of_get_property(phb->hose->dn, "msi-ranges", NULL); + } + if (!prop) + return; + + phb->msi_base = be32_to_cpup(prop); + count = be32_to_cpup(prop + 1); + if (msi_bitmap_alloc(&phb->msi_bmp, count, phb->hose->dn)) { + pr_err("PCI %d: Failed to allocate MSI bitmap !\n", + phb->hose->global_number); + return; + } + + pr_info(" Allocated bitmap for %d MSIs (base IRQ 0x%x)\n", + count, phb->msi_base); + + pnv_msi_allocate_domains(phb->hose, count); +} + +static void pnv_ioda_setup_pe_res(struct pnv_ioda_pe *pe, + struct resource *res) +{ + struct pnv_phb *phb = pe->phb; + struct pci_bus_region region; + int index; + int64_t rc; + + if (!res || !res->flags || res->start > res->end) + return; + + if (res->flags & IORESOURCE_IO) { + region.start = res->start - phb->ioda.io_pci_base; + region.end = res->end - phb->ioda.io_pci_base; + index = region.start / phb->ioda.io_segsize; + + while (index < phb->ioda.total_pe_num && + region.start <= region.end) { + phb->ioda.io_segmap[index] = pe->pe_number; + rc = opal_pci_map_pe_mmio_window(phb->opal_id, + pe->pe_number, OPAL_IO_WINDOW_TYPE, 0, index); + if (rc != OPAL_SUCCESS) { + pr_err("%s: Error %lld mapping IO segment#%d to PE#%x\n", + __func__, rc, index, pe->pe_number); + break; + } + + region.start += phb->ioda.io_segsize; + index++; + } + } else if ((res->flags & IORESOURCE_MEM) && + !pnv_pci_is_m64(phb, res)) { + region.start = res->start - + phb->hose->mem_offset[0] - + phb->ioda.m32_pci_base; + region.end = res->end - + phb->hose->mem_offset[0] - + phb->ioda.m32_pci_base; + index = region.start / phb->ioda.m32_segsize; + + while (index < phb->ioda.total_pe_num && + region.start <= region.end) { + phb->ioda.m32_segmap[index] = pe->pe_number; + rc = opal_pci_map_pe_mmio_window(phb->opal_id, + pe->pe_number, OPAL_M32_WINDOW_TYPE, 0, index); + if (rc != OPAL_SUCCESS) { + pr_err("%s: Error %lld mapping M32 segment#%d to PE#%x", + __func__, rc, index, pe->pe_number); + break; + } + + region.start += phb->ioda.m32_segsize; + index++; + } + } +} + +/* + * This function is supposed to be called on basis of PE from top + * to bottom style. So the I/O or MMIO segment assigned to + * parent PE could be overridden by its child PEs if necessary. + */ +static void pnv_ioda_setup_pe_seg(struct pnv_ioda_pe *pe) +{ + struct pci_dev *pdev; + int i; + + /* + * NOTE: We only care PCI bus based PE for now. For PCI + * device based PE, for example SRIOV sensitive VF should + * be figured out later. + */ + BUG_ON(!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL))); + + list_for_each_entry(pdev, &pe->pbus->devices, bus_list) { + for (i = 0; i <= PCI_ROM_RESOURCE; i++) + pnv_ioda_setup_pe_res(pe, &pdev->resource[i]); + + /* + * If the PE contains all subordinate PCI buses, the + * windows of the child bridges should be mapped to + * the PE as well. + */ + if (!(pe->flags & PNV_IODA_PE_BUS_ALL) || !pci_is_bridge(pdev)) + continue; + for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) + pnv_ioda_setup_pe_res(pe, + &pdev->resource[PCI_BRIDGE_RESOURCES + i]); + } +} + +#ifdef CONFIG_DEBUG_FS +static int pnv_pci_diag_data_set(void *data, u64 val) +{ + struct pnv_phb *phb = data; + s64 ret; + + /* Retrieve the diag data from firmware */ + ret = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag_data, + phb->diag_data_size); + if (ret != OPAL_SUCCESS) + return -EIO; + + /* Print the diag data to the kernel log */ + pnv_pci_dump_phb_diag_data(phb->hose, phb->diag_data); + return 0; +} + +DEFINE_DEBUGFS_ATTRIBUTE(pnv_pci_diag_data_fops, NULL, pnv_pci_diag_data_set, + "%llu\n"); + +static int pnv_pci_ioda_pe_dump(void *data, u64 val) +{ + struct pnv_phb *phb = data; + int pe_num; + + for (pe_num = 0; pe_num < phb->ioda.total_pe_num; pe_num++) { + struct pnv_ioda_pe *pe = &phb->ioda.pe_array[pe_num]; + + if (!test_bit(pe_num, phb->ioda.pe_alloc)) + continue; + + pe_warn(pe, "rid: %04x dev count: %2d flags: %s%s%s%s%s%s\n", + pe->rid, pe->device_count, + (pe->flags & PNV_IODA_PE_DEV) ? "dev " : "", + (pe->flags & PNV_IODA_PE_BUS) ? "bus " : "", + (pe->flags & PNV_IODA_PE_BUS_ALL) ? "all " : "", + (pe->flags & PNV_IODA_PE_MASTER) ? "master " : "", + (pe->flags & PNV_IODA_PE_SLAVE) ? "slave " : "", + (pe->flags & PNV_IODA_PE_VF) ? "vf " : ""); + } + + return 0; +} + +DEFINE_DEBUGFS_ATTRIBUTE(pnv_pci_ioda_pe_dump_fops, NULL, + pnv_pci_ioda_pe_dump, "%llu\n"); + +#endif /* CONFIG_DEBUG_FS */ + +static void pnv_pci_ioda_create_dbgfs(void) +{ +#ifdef CONFIG_DEBUG_FS + struct pci_controller *hose, *tmp; + struct pnv_phb *phb; + char name[16]; + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + phb = hose->private_data; + + sprintf(name, "PCI%04x", hose->global_number); + phb->dbgfs = debugfs_create_dir(name, arch_debugfs_dir); + + debugfs_create_file_unsafe("dump_diag_regs", 0200, phb->dbgfs, + phb, &pnv_pci_diag_data_fops); + debugfs_create_file_unsafe("dump_ioda_pe_state", 0200, phb->dbgfs, + phb, &pnv_pci_ioda_pe_dump_fops); + } +#endif /* CONFIG_DEBUG_FS */ +} + +static void pnv_pci_enable_bridge(struct pci_bus *bus) +{ + struct pci_dev *dev = bus->self; + struct pci_bus *child; + + /* Empty bus ? bail */ + if (list_empty(&bus->devices)) + return; + + /* + * If there's a bridge associated with that bus enable it. This works + * around races in the generic code if the enabling is done during + * parallel probing. This can be removed once those races have been + * fixed. + */ + if (dev) { + int rc = pci_enable_device(dev); + if (rc) + pci_err(dev, "Error enabling bridge (%d)\n", rc); + pci_set_master(dev); + } + + /* Perform the same to child busses */ + list_for_each_entry(child, &bus->children, node) + pnv_pci_enable_bridge(child); +} + +static void pnv_pci_enable_bridges(void) +{ + struct pci_controller *hose; + + list_for_each_entry(hose, &hose_list, list_node) + pnv_pci_enable_bridge(hose->bus); +} + +static void pnv_pci_ioda_fixup(void) +{ + pnv_pci_ioda_create_dbgfs(); + + pnv_pci_enable_bridges(); + +#ifdef CONFIG_EEH + pnv_eeh_post_init(); +#endif +} + +/* + * Returns the alignment for I/O or memory windows for P2P + * bridges. That actually depends on how PEs are segmented. + * For now, we return I/O or M32 segment size for PE sensitive + * P2P bridges. Otherwise, the default values (4KiB for I/O, + * 1MiB for memory) will be returned. + * + * The current PCI bus might be put into one PE, which was + * create against the parent PCI bridge. For that case, we + * needn't enlarge the alignment so that we can save some + * resources. + */ +static resource_size_t pnv_pci_window_alignment(struct pci_bus *bus, + unsigned long type) +{ + struct pnv_phb *phb = pci_bus_to_pnvhb(bus); + int num_pci_bridges = 0; + struct pci_dev *bridge; + + bridge = bus->self; + while (bridge) { + if (pci_pcie_type(bridge) == PCI_EXP_TYPE_PCI_BRIDGE) { + num_pci_bridges++; + if (num_pci_bridges >= 2) + return 1; + } + + bridge = bridge->bus->self; + } + + /* + * We fall back to M32 if M64 isn't supported. We enforce the M64 + * alignment for any 64-bit resource, PCIe doesn't care and + * bridges only do 64-bit prefetchable anyway. + */ + if (phb->ioda.m64_segsize && pnv_pci_is_m64_flags(type)) + return phb->ioda.m64_segsize; + if (type & IORESOURCE_MEM) + return phb->ioda.m32_segsize; + + return phb->ioda.io_segsize; +} + +/* + * We are updating root port or the upstream port of the + * bridge behind the root port with PHB's windows in order + * to accommodate the changes on required resources during + * PCI (slot) hotplug, which is connected to either root + * port or the downstream ports of PCIe switch behind the + * root port. + */ +static void pnv_pci_fixup_bridge_resources(struct pci_bus *bus, + unsigned long type) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + struct pnv_phb *phb = hose->private_data; + struct pci_dev *bridge = bus->self; + struct resource *r, *w; + bool msi_region = false; + int i; + + /* Check if we need apply fixup to the bridge's windows */ + if (!pci_is_root_bus(bridge->bus) && + !pci_is_root_bus(bridge->bus->self->bus)) + return; + + /* Fixup the resources */ + for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) { + r = &bridge->resource[PCI_BRIDGE_RESOURCES + i]; + if (!r->flags || !r->parent) + continue; + + w = NULL; + if (r->flags & type & IORESOURCE_IO) + w = &hose->io_resource; + else if (pnv_pci_is_m64(phb, r) && + (type & IORESOURCE_PREFETCH) && + phb->ioda.m64_segsize) + w = &hose->mem_resources[1]; + else if (r->flags & type & IORESOURCE_MEM) { + w = &hose->mem_resources[0]; + msi_region = true; + } + + r->start = w->start; + r->end = w->end; + + /* The 64KB 32-bits MSI region shouldn't be included in + * the 32-bits bridge window. Otherwise, we can see strange + * issues. One of them is EEH error observed on Garrison. + * + * Exclude top 1MB region which is the minimal alignment of + * 32-bits bridge window. + */ + if (msi_region) { + r->end += 0x10000; + r->end -= 0x100000; + } + } +} + +static void pnv_pci_configure_bus(struct pci_bus *bus) +{ + struct pci_dev *bridge = bus->self; + struct pnv_ioda_pe *pe; + bool all = (bridge && pci_pcie_type(bridge) == PCI_EXP_TYPE_PCI_BRIDGE); + + dev_info(&bus->dev, "Configuring PE for bus\n"); + + /* Don't assign PE to PCI bus, which doesn't have subordinate devices */ + if (WARN_ON(list_empty(&bus->devices))) + return; + + /* Reserve PEs according to used M64 resources */ + pnv_ioda_reserve_m64_pe(bus, NULL, all); + + /* + * Assign PE. We might run here because of partial hotplug. + * For the case, we just pick up the existing PE and should + * not allocate resources again. + */ + pe = pnv_ioda_setup_bus_PE(bus, all); + if (!pe) + return; + + pnv_ioda_setup_pe_seg(pe); +} + +static resource_size_t pnv_pci_default_alignment(void) +{ + return PAGE_SIZE; +} + +/* Prevent enabling devices for which we couldn't properly + * assign a PE + */ +static bool pnv_pci_enable_device_hook(struct pci_dev *dev) +{ + struct pci_dn *pdn; + + pdn = pci_get_pdn(dev); + if (!pdn || pdn->pe_number == IODA_INVALID_PE) { + pci_err(dev, "pci_enable_device() blocked, no PE assigned.\n"); + return false; + } + + return true; +} + +static bool pnv_ocapi_enable_device_hook(struct pci_dev *dev) +{ + struct pci_dn *pdn; + struct pnv_ioda_pe *pe; + + pdn = pci_get_pdn(dev); + if (!pdn) + return false; + + if (pdn->pe_number == IODA_INVALID_PE) { + pe = pnv_ioda_setup_dev_PE(dev); + if (!pe) + return false; + } + return true; +} + +static long pnv_pci_ioda1_unset_window(struct iommu_table_group *table_group, + int num) +{ + struct pnv_ioda_pe *pe = container_of(table_group, + struct pnv_ioda_pe, table_group); + struct pnv_phb *phb = pe->phb; + unsigned int idx; + long rc; + + pe_info(pe, "Removing DMA window #%d\n", num); + for (idx = 0; idx < phb->ioda.dma32_count; idx++) { + if (phb->ioda.dma32_segmap[idx] != pe->pe_number) + continue; + + rc = opal_pci_map_pe_dma_window(phb->opal_id, pe->pe_number, + idx, 0, 0ul, 0ul, 0ul); + if (rc != OPAL_SUCCESS) { + pe_warn(pe, "Failure %ld unmapping DMA32 segment#%d\n", + rc, idx); + return rc; + } + + phb->ioda.dma32_segmap[idx] = IODA_INVALID_PE; + } + + pnv_pci_unlink_table_and_group(table_group->tables[num], table_group); + return OPAL_SUCCESS; +} + +static void pnv_pci_ioda1_release_pe_dma(struct pnv_ioda_pe *pe) +{ + struct iommu_table *tbl = pe->table_group.tables[0]; + int64_t rc; + + if (!pe->dma_setup_done) + return; + + rc = pnv_pci_ioda1_unset_window(&pe->table_group, 0); + if (rc != OPAL_SUCCESS) + return; + + pnv_pci_p7ioc_tce_invalidate(tbl, tbl->it_offset, tbl->it_size); + if (pe->table_group.group) { + iommu_group_put(pe->table_group.group); + WARN_ON(pe->table_group.group); + } + + free_pages(tbl->it_base, get_order(tbl->it_size << 3)); + iommu_tce_table_put(tbl); +} + +void pnv_pci_ioda2_release_pe_dma(struct pnv_ioda_pe *pe) +{ + struct iommu_table *tbl = pe->table_group.tables[0]; + int64_t rc; + + if (!pe->dma_setup_done) + return; + + rc = pnv_pci_ioda2_unset_window(&pe->table_group, 0); + if (rc) + pe_warn(pe, "OPAL error %lld release DMA window\n", rc); + + pnv_pci_ioda2_set_bypass(pe, false); + if (pe->table_group.group) { + iommu_group_put(pe->table_group.group); + WARN_ON(pe->table_group.group); + } + + iommu_tce_table_put(tbl); +} + +static void pnv_ioda_free_pe_seg(struct pnv_ioda_pe *pe, + unsigned short win, + unsigned int *map) +{ + struct pnv_phb *phb = pe->phb; + int idx; + int64_t rc; + + for (idx = 0; idx < phb->ioda.total_pe_num; idx++) { + if (map[idx] != pe->pe_number) + continue; + + rc = opal_pci_map_pe_mmio_window(phb->opal_id, + phb->ioda.reserved_pe_idx, win, 0, idx); + + if (rc != OPAL_SUCCESS) + pe_warn(pe, "Error %lld unmapping (%d) segment#%d\n", + rc, win, idx); + + map[idx] = IODA_INVALID_PE; + } +} + +static void pnv_ioda_release_pe_seg(struct pnv_ioda_pe *pe) +{ + struct pnv_phb *phb = pe->phb; + + if (phb->type == PNV_PHB_IODA1) { + pnv_ioda_free_pe_seg(pe, OPAL_IO_WINDOW_TYPE, + phb->ioda.io_segmap); + pnv_ioda_free_pe_seg(pe, OPAL_M32_WINDOW_TYPE, + phb->ioda.m32_segmap); + /* M64 is pre-configured by pnv_ioda1_init_m64() */ + } else if (phb->type == PNV_PHB_IODA2) { + pnv_ioda_free_pe_seg(pe, OPAL_M32_WINDOW_TYPE, + phb->ioda.m32_segmap); + } +} + +static void pnv_ioda_release_pe(struct pnv_ioda_pe *pe) +{ + struct pnv_phb *phb = pe->phb; + struct pnv_ioda_pe *slave, *tmp; + + pe_info(pe, "Releasing PE\n"); + + mutex_lock(&phb->ioda.pe_list_mutex); + list_del(&pe->list); + mutex_unlock(&phb->ioda.pe_list_mutex); + + switch (phb->type) { + case PNV_PHB_IODA1: + pnv_pci_ioda1_release_pe_dma(pe); + break; + case PNV_PHB_IODA2: + pnv_pci_ioda2_release_pe_dma(pe); + break; + case PNV_PHB_NPU_OCAPI: + break; + default: + WARN_ON(1); + } + + pnv_ioda_release_pe_seg(pe); + pnv_ioda_deconfigure_pe(pe->phb, pe); + + /* Release slave PEs in the compound PE */ + if (pe->flags & PNV_IODA_PE_MASTER) { + list_for_each_entry_safe(slave, tmp, &pe->slaves, list) { + list_del(&slave->list); + pnv_ioda_free_pe(slave); + } + } + + /* + * The PE for root bus can be removed because of hotplug in EEH + * recovery for fenced PHB error. We need to mark the PE dead so + * that it can be populated again in PCI hot add path. The PE + * shouldn't be destroyed as it's the global reserved resource. + */ + if (phb->ioda.root_pe_idx == pe->pe_number) + return; + + pnv_ioda_free_pe(pe); +} + +static void pnv_pci_release_device(struct pci_dev *pdev) +{ + struct pnv_phb *phb = pci_bus_to_pnvhb(pdev->bus); + struct pci_dn *pdn = pci_get_pdn(pdev); + struct pnv_ioda_pe *pe; + + /* The VF PE state is torn down when sriov_disable() is called */ + if (pdev->is_virtfn) + return; + + if (!pdn || pdn->pe_number == IODA_INVALID_PE) + return; + +#ifdef CONFIG_PCI_IOV + /* + * FIXME: Try move this to sriov_disable(). It's here since we allocate + * the iov state at probe time since we need to fiddle with the IOV + * resources. + */ + if (pdev->is_physfn) + kfree(pdev->dev.archdata.iov_data); +#endif + + /* + * PCI hotplug can happen as part of EEH error recovery. The @pdn + * isn't removed and added afterwards in this scenario. We should + * set the PE number in @pdn to an invalid one. Otherwise, the PE's + * device count is decreased on removing devices while failing to + * be increased on adding devices. It leads to unbalanced PE's device + * count and eventually make normal PCI hotplug path broken. + */ + pe = &phb->ioda.pe_array[pdn->pe_number]; + pdn->pe_number = IODA_INVALID_PE; + + WARN_ON(--pe->device_count < 0); + if (pe->device_count == 0) + pnv_ioda_release_pe(pe); +} + +static void pnv_pci_ioda_shutdown(struct pci_controller *hose) +{ + struct pnv_phb *phb = hose->private_data; + + opal_pci_reset(phb->opal_id, OPAL_RESET_PCI_IODA_TABLE, + OPAL_ASSERT_RESET); +} + +static void pnv_pci_ioda_dma_bus_setup(struct pci_bus *bus) +{ + struct pnv_phb *phb = pci_bus_to_pnvhb(bus); + struct pnv_ioda_pe *pe; + + list_for_each_entry(pe, &phb->ioda.pe_list, list) { + if (!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL))) + continue; + + if (!pe->pbus) + continue; + + if (bus->number == ((pe->rid >> 8) & 0xFF)) { + pe->pbus = bus; + break; + } + } +} + +static const struct pci_controller_ops pnv_pci_ioda_controller_ops = { + .dma_dev_setup = pnv_pci_ioda_dma_dev_setup, + .dma_bus_setup = pnv_pci_ioda_dma_bus_setup, + .iommu_bypass_supported = pnv_pci_ioda_iommu_bypass_supported, + .enable_device_hook = pnv_pci_enable_device_hook, + .release_device = pnv_pci_release_device, + .window_alignment = pnv_pci_window_alignment, + .setup_bridge = pnv_pci_fixup_bridge_resources, + .reset_secondary_bus = pnv_pci_reset_secondary_bus, + .shutdown = pnv_pci_ioda_shutdown, +}; + +static const struct pci_controller_ops pnv_npu_ocapi_ioda_controller_ops = { + .enable_device_hook = pnv_ocapi_enable_device_hook, + .release_device = pnv_pci_release_device, + .window_alignment = pnv_pci_window_alignment, + .reset_secondary_bus = pnv_pci_reset_secondary_bus, + .shutdown = pnv_pci_ioda_shutdown, +}; + +static void __init pnv_pci_init_ioda_phb(struct device_node *np, + u64 hub_id, int ioda_type) +{ + struct pci_controller *hose; + struct pnv_phb *phb; + unsigned long size, m64map_off, m32map_off, pemap_off; + unsigned long iomap_off = 0, dma32map_off = 0; + struct pnv_ioda_pe *root_pe; + struct resource r; + const __be64 *prop64; + const __be32 *prop32; + int len; + unsigned int segno; + u64 phb_id; + void *aux; + long rc; + + if (!of_device_is_available(np)) + return; + + pr_info("Initializing %s PHB (%pOF)\n", pnv_phb_names[ioda_type], np); + + prop64 = of_get_property(np, "ibm,opal-phbid", NULL); + if (!prop64) { + pr_err(" Missing \"ibm,opal-phbid\" property !\n"); + return; + } + phb_id = be64_to_cpup(prop64); + pr_debug(" PHB-ID : 0x%016llx\n", phb_id); + + phb = kzalloc(sizeof(*phb), GFP_KERNEL); + if (!phb) + panic("%s: Failed to allocate %zu bytes\n", __func__, + sizeof(*phb)); + + /* Allocate PCI controller */ + phb->hose = hose = pcibios_alloc_controller(np); + if (!phb->hose) { + pr_err(" Can't allocate PCI controller for %pOF\n", + np); + memblock_free(phb, sizeof(struct pnv_phb)); + return; + } + + spin_lock_init(&phb->lock); + prop32 = of_get_property(np, "bus-range", &len); + if (prop32 && len == 8) { + hose->first_busno = be32_to_cpu(prop32[0]); + hose->last_busno = be32_to_cpu(prop32[1]); + } else { + pr_warn(" Broken on %pOF\n", np); + hose->first_busno = 0; + hose->last_busno = 0xff; + } + hose->private_data = phb; + phb->hub_id = hub_id; + phb->opal_id = phb_id; + phb->type = ioda_type; + mutex_init(&phb->ioda.pe_alloc_mutex); + + /* Detect specific models for error handling */ + if (of_device_is_compatible(np, "ibm,p7ioc-pciex")) + phb->model = PNV_PHB_MODEL_P7IOC; + else if (of_device_is_compatible(np, "ibm,power8-pciex")) + phb->model = PNV_PHB_MODEL_PHB3; + else + phb->model = PNV_PHB_MODEL_UNKNOWN; + + /* Initialize diagnostic data buffer */ + prop32 = of_get_property(np, "ibm,phb-diag-data-size", NULL); + if (prop32) + phb->diag_data_size = be32_to_cpup(prop32); + else + phb->diag_data_size = PNV_PCI_DIAG_BUF_SIZE; + + phb->diag_data = kzalloc(phb->diag_data_size, GFP_KERNEL); + if (!phb->diag_data) + panic("%s: Failed to allocate %u bytes\n", __func__, + phb->diag_data_size); + + /* Parse 32-bit and IO ranges (if any) */ + pci_process_bridge_OF_ranges(hose, np, !hose->global_number); + + /* Get registers */ + if (!of_address_to_resource(np, 0, &r)) { + phb->regs_phys = r.start; + phb->regs = ioremap(r.start, resource_size(&r)); + if (phb->regs == NULL) + pr_err(" Failed to map registers !\n"); + } + + /* Initialize more IODA stuff */ + phb->ioda.total_pe_num = 1; + prop32 = of_get_property(np, "ibm,opal-num-pes", NULL); + if (prop32) + phb->ioda.total_pe_num = be32_to_cpup(prop32); + prop32 = of_get_property(np, "ibm,opal-reserved-pe", NULL); + if (prop32) + phb->ioda.reserved_pe_idx = be32_to_cpup(prop32); + + /* Invalidate RID to PE# mapping */ + for (segno = 0; segno < ARRAY_SIZE(phb->ioda.pe_rmap); segno++) + phb->ioda.pe_rmap[segno] = IODA_INVALID_PE; + + /* Parse 64-bit MMIO range */ + pnv_ioda_parse_m64_window(phb); + + phb->ioda.m32_size = resource_size(&hose->mem_resources[0]); + /* FW Has already off top 64k of M32 space (MSI space) */ + phb->ioda.m32_size += 0x10000; + + phb->ioda.m32_segsize = phb->ioda.m32_size / phb->ioda.total_pe_num; + phb->ioda.m32_pci_base = hose->mem_resources[0].start - hose->mem_offset[0]; + phb->ioda.io_size = hose->pci_io_size; + phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe_num; + phb->ioda.io_pci_base = 0; /* XXX calculate this ? */ + + /* Calculate how many 32-bit TCE segments we have */ + phb->ioda.dma32_count = phb->ioda.m32_pci_base / + PNV_IODA1_DMA32_SEGSIZE; + + /* Allocate aux data & arrays. We don't have IO ports on PHB3 */ + size = ALIGN(max_t(unsigned, phb->ioda.total_pe_num, 8) / 8, + sizeof(unsigned long)); + m64map_off = size; + size += phb->ioda.total_pe_num * sizeof(phb->ioda.m64_segmap[0]); + m32map_off = size; + size += phb->ioda.total_pe_num * sizeof(phb->ioda.m32_segmap[0]); + if (phb->type == PNV_PHB_IODA1) { + iomap_off = size; + size += phb->ioda.total_pe_num * sizeof(phb->ioda.io_segmap[0]); + dma32map_off = size; + size += phb->ioda.dma32_count * + sizeof(phb->ioda.dma32_segmap[0]); + } + pemap_off = size; + size += phb->ioda.total_pe_num * sizeof(struct pnv_ioda_pe); + aux = kzalloc(size, GFP_KERNEL); + if (!aux) + panic("%s: Failed to allocate %lu bytes\n", __func__, size); + + phb->ioda.pe_alloc = aux; + phb->ioda.m64_segmap = aux + m64map_off; + phb->ioda.m32_segmap = aux + m32map_off; + for (segno = 0; segno < phb->ioda.total_pe_num; segno++) { + phb->ioda.m64_segmap[segno] = IODA_INVALID_PE; + phb->ioda.m32_segmap[segno] = IODA_INVALID_PE; + } + if (phb->type == PNV_PHB_IODA1) { + phb->ioda.io_segmap = aux + iomap_off; + for (segno = 0; segno < phb->ioda.total_pe_num; segno++) + phb->ioda.io_segmap[segno] = IODA_INVALID_PE; + + phb->ioda.dma32_segmap = aux + dma32map_off; + for (segno = 0; segno < phb->ioda.dma32_count; segno++) + phb->ioda.dma32_segmap[segno] = IODA_INVALID_PE; + } + phb->ioda.pe_array = aux + pemap_off; + + /* + * Choose PE number for root bus, which shouldn't have + * M64 resources consumed by its child devices. To pick + * the PE number adjacent to the reserved one if possible. + */ + pnv_ioda_reserve_pe(phb, phb->ioda.reserved_pe_idx); + if (phb->ioda.reserved_pe_idx == 0) { + phb->ioda.root_pe_idx = 1; + pnv_ioda_reserve_pe(phb, phb->ioda.root_pe_idx); + } else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1)) { + phb->ioda.root_pe_idx = phb->ioda.reserved_pe_idx - 1; + pnv_ioda_reserve_pe(phb, phb->ioda.root_pe_idx); + } else { + /* otherwise just allocate one */ + root_pe = pnv_ioda_alloc_pe(phb, 1); + phb->ioda.root_pe_idx = root_pe->pe_number; + } + + INIT_LIST_HEAD(&phb->ioda.pe_list); + mutex_init(&phb->ioda.pe_list_mutex); + + /* Calculate how many 32-bit TCE segments we have */ + phb->ioda.dma32_count = phb->ioda.m32_pci_base / + PNV_IODA1_DMA32_SEGSIZE; + +#if 0 /* We should really do that ... */ + rc = opal_pci_set_phb_mem_window(opal->phb_id, + window_type, + window_num, + starting_real_address, + starting_pci_address, + segment_size); +#endif + + pr_info(" %03d (%03d) PE's M32: 0x%x [segment=0x%x]\n", + phb->ioda.total_pe_num, phb->ioda.reserved_pe_idx, + phb->ioda.m32_size, phb->ioda.m32_segsize); + if (phb->ioda.m64_size) + pr_info(" M64: 0x%lx [segment=0x%lx]\n", + phb->ioda.m64_size, phb->ioda.m64_segsize); + if (phb->ioda.io_size) + pr_info(" IO: 0x%x [segment=0x%x]\n", + phb->ioda.io_size, phb->ioda.io_segsize); + + + phb->hose->ops = &pnv_pci_ops; + phb->get_pe_state = pnv_ioda_get_pe_state; + phb->freeze_pe = pnv_ioda_freeze_pe; + phb->unfreeze_pe = pnv_ioda_unfreeze_pe; + + /* Setup MSI support */ + pnv_pci_init_ioda_msis(phb); + + /* + * We pass the PCI probe flag PCI_REASSIGN_ALL_RSRC here + * to let the PCI core do resource assignment. It's supposed + * that the PCI core will do correct I/O and MMIO alignment + * for the P2P bridge bars so that each PCI bus (excluding + * the child P2P bridges) can form individual PE. + */ + ppc_md.pcibios_fixup = pnv_pci_ioda_fixup; + + switch (phb->type) { + case PNV_PHB_NPU_OCAPI: + hose->controller_ops = pnv_npu_ocapi_ioda_controller_ops; + break; + default: + hose->controller_ops = pnv_pci_ioda_controller_ops; + } + + ppc_md.pcibios_default_alignment = pnv_pci_default_alignment; + +#ifdef CONFIG_PCI_IOV + ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov; + ppc_md.pcibios_iov_resource_alignment = pnv_pci_iov_resource_alignment; + ppc_md.pcibios_sriov_enable = pnv_pcibios_sriov_enable; + ppc_md.pcibios_sriov_disable = pnv_pcibios_sriov_disable; +#endif + + pci_add_flags(PCI_REASSIGN_ALL_RSRC); + + /* Reset IODA tables to a clean state */ + rc = opal_pci_reset(phb_id, OPAL_RESET_PCI_IODA_TABLE, OPAL_ASSERT_RESET); + if (rc) + pr_warn(" OPAL Error %ld performing IODA table reset !\n", rc); + + /* + * If we're running in kdump kernel, the previous kernel never + * shutdown PCI devices correctly. We already got IODA table + * cleaned out. So we have to issue PHB reset to stop all PCI + * transactions from previous kernel. The ppc_pci_reset_phbs + * kernel parameter will force this reset too. Additionally, + * if the IODA reset above failed then use a bigger hammer. + * This can happen if we get a PHB fatal error in very early + * boot. + */ + if (is_kdump_kernel() || pci_reset_phbs || rc) { + pr_info(" Issue PHB reset ...\n"); + pnv_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL); + pnv_eeh_phb_reset(hose, EEH_RESET_DEACTIVATE); + } + + /* Remove M64 resource if we can't configure it successfully */ + if (!phb->init_m64 || phb->init_m64(phb)) + hose->mem_resources[1].flags = 0; + + /* create pci_dn's for DT nodes under this PHB */ + pci_devs_phb_init_dynamic(hose); +} + +void __init pnv_pci_init_ioda2_phb(struct device_node *np) +{ + pnv_pci_init_ioda_phb(np, 0, PNV_PHB_IODA2); +} + +void __init pnv_pci_init_npu2_opencapi_phb(struct device_node *np) +{ + pnv_pci_init_ioda_phb(np, 0, PNV_PHB_NPU_OCAPI); +} + +static void pnv_npu2_opencapi_cfg_size_fixup(struct pci_dev *dev) +{ + struct pnv_phb *phb = pci_bus_to_pnvhb(dev->bus); + + if (!machine_is(powernv)) + return; + + if (phb->type == PNV_PHB_NPU_OCAPI) + dev->cfg_size = PCI_CFG_SPACE_EXP_SIZE; +} +DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pnv_npu2_opencapi_cfg_size_fixup); + +void __init pnv_pci_init_ioda_hub(struct device_node *np) +{ + struct device_node *phbn; + const __be64 *prop64; + u64 hub_id; + + pr_info("Probing IODA IO-Hub %pOF\n", np); + + prop64 = of_get_property(np, "ibm,opal-hubid", NULL); + if (!prop64) { + pr_err(" Missing \"ibm,opal-hubid\" property !\n"); + return; + } + hub_id = be64_to_cpup(prop64); + pr_devel(" HUB-ID : 0x%016llx\n", hub_id); + + /* Count child PHBs */ + for_each_child_of_node(np, phbn) { + /* Look for IODA1 PHBs */ + if (of_device_is_compatible(phbn, "ibm,ioda-phb")) + pnv_pci_init_ioda_phb(phbn, hub_id, PNV_PHB_IODA1); + } +} -- cgit v1.2.3