From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- arch/x86/pci/irq.c | 1810 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1810 insertions(+) create mode 100644 arch/x86/pci/irq.c (limited to 'arch/x86/pci/irq.c') diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c new file mode 100644 index 000000000..a498b847d --- /dev/null +++ b/arch/x86/pci/irq.c @@ -0,0 +1,1810 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Low-Level PCI Support for PC -- Routing of Interrupts + * + * (c) 1999--2000 Martin Mares + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define PIRQ_SIGNATURE (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24)) +#define PIRQ_VERSION 0x0100 + +#define IRT_SIGNATURE (('$' << 0) + ('I' << 8) + ('R' << 16) + ('T' << 24)) + +static int broken_hp_bios_irq9; +static int acer_tm360_irqrouting; + +static struct irq_routing_table *pirq_table; + +static int pirq_enable_irq(struct pci_dev *dev); +static void pirq_disable_irq(struct pci_dev *dev); + +/* + * Never use: 0, 1, 2 (timer, keyboard, and cascade) + * Avoid using: 13, 14 and 15 (FP error and IDE). + * Penalize: 3, 4, 6, 7, 12 (known ISA uses: serial, floppy, parallel and mouse) + */ +unsigned int pcibios_irq_mask = 0xfff8; + +static int pirq_penalty[16] = { + 1000000, 1000000, 1000000, 1000, 1000, 0, 1000, 1000, + 0, 0, 0, 0, 1000, 100000, 100000, 100000 +}; + +struct irq_router { + char *name; + u16 vendor, device; + int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq); + int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, + int new); + int (*lvl)(struct pci_dev *router, struct pci_dev *dev, int pirq, + int irq); +}; + +struct irq_router_handler { + u16 vendor; + int (*probe)(struct irq_router *r, struct pci_dev *router, u16 device); +}; + +int (*pcibios_enable_irq)(struct pci_dev *dev) = pirq_enable_irq; +void (*pcibios_disable_irq)(struct pci_dev *dev) = pirq_disable_irq; + +/* + * Check passed address for the PCI IRQ Routing Table signature + * and perform checksum verification. + */ + +static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr, + u8 *limit) +{ + struct irq_routing_table *rt; + int i; + u8 sum; + + rt = (struct irq_routing_table *)addr; + if (rt->signature != PIRQ_SIGNATURE || + rt->version != PIRQ_VERSION || + rt->size % 16 || + rt->size < sizeof(struct irq_routing_table) || + (limit && rt->size > limit - addr)) + return NULL; + sum = 0; + for (i = 0; i < rt->size; i++) + sum += addr[i]; + if (!sum) { + DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%lx\n", + __pa(rt)); + return rt; + } + return NULL; +} + +/* + * Handle the $IRT PCI IRQ Routing Table format used by AMI for its BCP + * (BIOS Configuration Program) external tool meant for tweaking BIOS + * structures without the need to rebuild it from sources. The $IRT + * format has been invented by AMI before Microsoft has come up with its + * $PIR format and a $IRT table is therefore there in some systems that + * lack a $PIR table. + * + * It uses the same PCI BIOS 2.1 format for interrupt routing entries + * themselves but has a different simpler header prepended instead, + * occupying 8 bytes, where a `$IRT' signature is followed by one byte + * specifying the total number of interrupt routing entries allocated in + * the table, then one byte specifying the actual number of entries used + * (which the BCP tool can take advantage of when modifying the table), + * and finally a 16-bit word giving the IRQs devoted exclusively to PCI. + * Unlike with the $PIR table there is no alignment guarantee. + * + * Given the similarity of the two formats the $IRT one is trivial to + * convert to the $PIR one, which we do here, except that obviously we + * have no information as to the router device to use, but we can handle + * it by matching PCI device IDs actually seen on the bus against ones + * that our individual routers recognise. + * + * Reportedly there is another $IRT table format where a 16-bit word + * follows the header instead that points to interrupt routing entries + * in a $PIR table provided elsewhere. In that case this code will not + * be reached though as the $PIR table will have been chosen instead. + */ +static inline struct irq_routing_table *pirq_convert_irt_table(u8 *addr, + u8 *limit) +{ + struct irt_routing_table *ir; + struct irq_routing_table *rt; + u16 size; + u8 sum; + int i; + + ir = (struct irt_routing_table *)addr; + if (ir->signature != IRT_SIGNATURE || !ir->used || ir->size < ir->used) + return NULL; + + size = sizeof(*ir) + ir->used * sizeof(ir->slots[0]); + if (size > limit - addr) + return NULL; + + DBG(KERN_DEBUG "PCI: $IRT Interrupt Routing Table found at 0x%lx\n", + __pa(ir)); + + size = sizeof(*rt) + ir->used * sizeof(rt->slots[0]); + rt = kzalloc(size, GFP_KERNEL); + if (!rt) + return NULL; + + rt->signature = PIRQ_SIGNATURE; + rt->version = PIRQ_VERSION; + rt->size = size; + rt->exclusive_irqs = ir->exclusive_irqs; + for (i = 0; i < ir->used; i++) + rt->slots[i] = ir->slots[i]; + + addr = (u8 *)rt; + sum = 0; + for (i = 0; i < size; i++) + sum += addr[i]; + rt->checksum = -sum; + + return rt; +} + +/* + * Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table. + */ + +static struct irq_routing_table * __init pirq_find_routing_table(void) +{ + u8 * const bios_start = (u8 *)__va(0xf0000); + u8 * const bios_end = (u8 *)__va(0x100000); + u8 *addr; + struct irq_routing_table *rt; + + if (pirq_table_addr) { + rt = pirq_check_routing_table((u8 *)__va(pirq_table_addr), + NULL); + if (rt) + return rt; + printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n"); + } + for (addr = bios_start; + addr < bios_end - sizeof(struct irq_routing_table); + addr += 16) { + rt = pirq_check_routing_table(addr, bios_end); + if (rt) + return rt; + } + for (addr = bios_start; + addr < bios_end - sizeof(struct irt_routing_table); + addr++) { + rt = pirq_convert_irt_table(addr, bios_end); + if (rt) + return rt; + } + return NULL; +} + +/* + * If we have a IRQ routing table, use it to search for peer host + * bridges. It's a gross hack, but since there are no other known + * ways how to get a list of buses, we have to go this way. + */ + +static void __init pirq_peer_trick(void) +{ + struct irq_routing_table *rt = pirq_table; + u8 busmap[256]; + int i; + struct irq_info *e; + + memset(busmap, 0, sizeof(busmap)); + for (i = 0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) { + e = &rt->slots[i]; +#ifdef DEBUG + { + int j; + DBG(KERN_DEBUG "%02x:%02x.%x slot=%02x", + e->bus, e->devfn / 8, e->devfn % 8, e->slot); + for (j = 0; j < 4; j++) + DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap); + DBG("\n"); + } +#endif + busmap[e->bus] = 1; + } + for (i = 1; i < 256; i++) { + if (!busmap[i] || pci_find_bus(0, i)) + continue; + pcibios_scan_root(i); + } + pcibios_last_bus = -1; +} + +/* + * Code for querying and setting of IRQ routes on various interrupt routers. + * PIC Edge/Level Control Registers (ELCR) 0x4d0 & 0x4d1. + */ + +void elcr_set_level_irq(unsigned int irq) +{ + unsigned char mask = 1 << (irq & 7); + unsigned int port = PIC_ELCR1 + (irq >> 3); + unsigned char val; + static u16 elcr_irq_mask; + + if (irq >= 16 || (1 << irq) & elcr_irq_mask) + return; + + elcr_irq_mask |= (1 << irq); + printk(KERN_DEBUG "PCI: setting IRQ %u as level-triggered\n", irq); + val = inb(port); + if (!(val & mask)) { + DBG(KERN_DEBUG " -> edge"); + outb(val | mask, port); + } +} + +/* + * PIRQ routing for the M1487 ISA Bus Controller (IBC) ASIC used + * with the ALi FinALi 486 chipset. The IBC is not decoded in the + * PCI configuration space, so we identify it by the accompanying + * M1489 Cache-Memory PCI Controller (CMP) ASIC. + * + * There are four 4-bit mappings provided, spread across two PCI + * INTx Routing Table Mapping Registers, available in the port I/O + * space accessible indirectly via the index/data register pair at + * 0x22/0x23, located at indices 0x42 and 0x43 for the INT1/INT2 + * and INT3/INT4 lines respectively. The INT1/INT3 and INT2/INT4 + * lines are mapped in the low and the high 4-bit nibble of the + * corresponding register as follows: + * + * 0000 : Disabled + * 0001 : IRQ9 + * 0010 : IRQ3 + * 0011 : IRQ10 + * 0100 : IRQ4 + * 0101 : IRQ5 + * 0110 : IRQ7 + * 0111 : IRQ6 + * 1000 : Reserved + * 1001 : IRQ11 + * 1010 : Reserved + * 1011 : IRQ12 + * 1100 : Reserved + * 1101 : IRQ14 + * 1110 : Reserved + * 1111 : IRQ15 + * + * In addition to the usual ELCR register pair there is a separate + * PCI INTx Sensitivity Register at index 0x44 in the same port I/O + * space, whose bits 3:0 select the trigger mode for INT[4:1] lines + * respectively. Any bit set to 1 causes interrupts coming on the + * corresponding line to be passed to ISA as edge-triggered and + * otherwise they are passed as level-triggered. Manufacturer's + * documentation says this register has to be set consistently with + * the relevant ELCR register. + * + * Accesses to the port I/O space concerned here need to be unlocked + * by writing the value of 0xc5 to the Lock Register at index 0x03 + * beforehand. Any other value written to said register prevents + * further accesses from reaching the register file, except for the + * Lock Register being written with 0xc5 again. + * + * References: + * + * "M1489/M1487: 486 PCI Chip Set", Version 1.2, Acer Laboratories + * Inc., July 1997 + */ + +#define PC_CONF_FINALI_LOCK 0x03u +#define PC_CONF_FINALI_PCI_INTX_RT1 0x42u +#define PC_CONF_FINALI_PCI_INTX_RT2 0x43u +#define PC_CONF_FINALI_PCI_INTX_SENS 0x44u + +#define PC_CONF_FINALI_LOCK_KEY 0xc5u + +static u8 read_pc_conf_nybble(u8 base, u8 index) +{ + u8 reg = base + (index >> 1); + u8 x; + + x = pc_conf_get(reg); + return index & 1 ? x >> 4 : x & 0xf; +} + +static void write_pc_conf_nybble(u8 base, u8 index, u8 val) +{ + u8 reg = base + (index >> 1); + u8 x; + + x = pc_conf_get(reg); + x = index & 1 ? (x & 0x0f) | (val << 4) : (x & 0xf0) | val; + pc_conf_set(reg, x); +} + +/* + * FinALi pirq rules are as follows: + * + * - bit 0 selects between INTx Routing Table Mapping Registers, + * + * - bit 3 selects the nibble within the INTx Routing Table Mapping Register, + * + * - bits 7:4 map to bits 3:0 of the PCI INTx Sensitivity Register. + */ +static int pirq_finali_get(struct pci_dev *router, struct pci_dev *dev, + int pirq) +{ + static const u8 irqmap[16] = { + 0, 9, 3, 10, 4, 5, 7, 6, 0, 11, 0, 12, 0, 14, 0, 15 + }; + unsigned long flags; + u8 index; + u8 x; + + index = (pirq & 1) << 1 | (pirq & 8) >> 3; + raw_spin_lock_irqsave(&pc_conf_lock, flags); + pc_conf_set(PC_CONF_FINALI_LOCK, PC_CONF_FINALI_LOCK_KEY); + x = irqmap[read_pc_conf_nybble(PC_CONF_FINALI_PCI_INTX_RT1, index)]; + pc_conf_set(PC_CONF_FINALI_LOCK, 0); + raw_spin_unlock_irqrestore(&pc_conf_lock, flags); + return x; +} + +static int pirq_finali_set(struct pci_dev *router, struct pci_dev *dev, + int pirq, int irq) +{ + static const u8 irqmap[16] = { + 0, 0, 0, 2, 4, 5, 7, 6, 0, 1, 3, 9, 11, 0, 13, 15 + }; + u8 val = irqmap[irq]; + unsigned long flags; + u8 index; + + if (!val) + return 0; + + index = (pirq & 1) << 1 | (pirq & 8) >> 3; + raw_spin_lock_irqsave(&pc_conf_lock, flags); + pc_conf_set(PC_CONF_FINALI_LOCK, PC_CONF_FINALI_LOCK_KEY); + write_pc_conf_nybble(PC_CONF_FINALI_PCI_INTX_RT1, index, val); + pc_conf_set(PC_CONF_FINALI_LOCK, 0); + raw_spin_unlock_irqrestore(&pc_conf_lock, flags); + return 1; +} + +static int pirq_finali_lvl(struct pci_dev *router, struct pci_dev *dev, + int pirq, int irq) +{ + u8 mask = ~((pirq & 0xf0u) >> 4); + unsigned long flags; + u8 trig; + + elcr_set_level_irq(irq); + raw_spin_lock_irqsave(&pc_conf_lock, flags); + pc_conf_set(PC_CONF_FINALI_LOCK, PC_CONF_FINALI_LOCK_KEY); + trig = pc_conf_get(PC_CONF_FINALI_PCI_INTX_SENS); + trig &= mask; + pc_conf_set(PC_CONF_FINALI_PCI_INTX_SENS, trig); + pc_conf_set(PC_CONF_FINALI_LOCK, 0); + raw_spin_unlock_irqrestore(&pc_conf_lock, flags); + return 1; +} + +/* + * Common IRQ routing practice: nibbles in config space, + * offset by some magic constant. + */ +static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr) +{ + u8 x; + unsigned reg = offset + (nr >> 1); + + pci_read_config_byte(router, reg, &x); + return (nr & 1) ? (x >> 4) : (x & 0xf); +} + +static void write_config_nybble(struct pci_dev *router, unsigned offset, + unsigned nr, unsigned int val) +{ + u8 x; + unsigned reg = offset + (nr >> 1); + + pci_read_config_byte(router, reg, &x); + x = (nr & 1) ? ((x & 0x0f) | (val << 4)) : ((x & 0xf0) | val); + pci_write_config_byte(router, reg, x); +} + +/* + * ALI pirq entries are damn ugly, and completely undocumented. + * This has been figured out from pirq tables, and it's not a pretty + * picture. + */ +static int pirq_ali_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + static const unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 }; + + WARN_ON_ONCE(pirq > 16); + return irqmap[read_config_nybble(router, 0x48, pirq-1)]; +} + +static int pirq_ali_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + static const unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1, 3, 9, 11, 0, 13, 15 }; + unsigned int val = irqmap[irq]; + + WARN_ON_ONCE(pirq > 16); + if (val) { + write_config_nybble(router, 0x48, pirq-1, val); + return 1; + } + return 0; +} + +/* + * PIRQ routing for the 82374EB/82374SB EISA System Component (ESC) + * ASIC used with the Intel 82420 and 82430 PCIsets. The ESC is not + * decoded in the PCI configuration space, so we identify it by the + * accompanying 82375EB/82375SB PCI-EISA Bridge (PCEB) ASIC. + * + * There are four PIRQ Route Control registers, available in the + * port I/O space accessible indirectly via the index/data register + * pair at 0x22/0x23, located at indices 0x60/0x61/0x62/0x63 for the + * PIRQ0/1/2/3# lines respectively. The semantics is the same as + * with the PIIX router. + * + * Accesses to the port I/O space concerned here need to be unlocked + * by writing the value of 0x0f to the ESC ID Register at index 0x02 + * beforehand. Any other value written to said register prevents + * further accesses from reaching the register file, except for the + * ESC ID Register being written with 0x0f again. + * + * References: + * + * "82374EB/82374SB EISA System Component (ESC)", Intel Corporation, + * Order Number: 290476-004, March 1996 + * + * "82375EB/82375SB PCI-EISA Bridge (PCEB)", Intel Corporation, Order + * Number: 290477-004, March 1996 + */ + +#define PC_CONF_I82374_ESC_ID 0x02u +#define PC_CONF_I82374_PIRQ_ROUTE_CONTROL 0x60u + +#define PC_CONF_I82374_ESC_ID_KEY 0x0fu + +static int pirq_esc_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + unsigned long flags; + int reg; + u8 x; + + reg = pirq; + if (reg >= 1 && reg <= 4) + reg += PC_CONF_I82374_PIRQ_ROUTE_CONTROL - 1; + + raw_spin_lock_irqsave(&pc_conf_lock, flags); + pc_conf_set(PC_CONF_I82374_ESC_ID, PC_CONF_I82374_ESC_ID_KEY); + x = pc_conf_get(reg); + pc_conf_set(PC_CONF_I82374_ESC_ID, 0); + raw_spin_unlock_irqrestore(&pc_conf_lock, flags); + return (x < 16) ? x : 0; +} + +static int pirq_esc_set(struct pci_dev *router, struct pci_dev *dev, int pirq, + int irq) +{ + unsigned long flags; + int reg; + + reg = pirq; + if (reg >= 1 && reg <= 4) + reg += PC_CONF_I82374_PIRQ_ROUTE_CONTROL - 1; + + raw_spin_lock_irqsave(&pc_conf_lock, flags); + pc_conf_set(PC_CONF_I82374_ESC_ID, PC_CONF_I82374_ESC_ID_KEY); + pc_conf_set(reg, irq); + pc_conf_set(PC_CONF_I82374_ESC_ID, 0); + raw_spin_unlock_irqrestore(&pc_conf_lock, flags); + return 1; +} + +/* + * The Intel PIIX4 pirq rules are fairly simple: "pirq" is + * just a pointer to the config space. + */ +static int pirq_piix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + u8 x; + + pci_read_config_byte(router, pirq, &x); + return (x < 16) ? x : 0; +} + +static int pirq_piix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + pci_write_config_byte(router, pirq, irq); + return 1; +} + +/* + * PIRQ routing for the 82426EX ISA Bridge (IB) ASIC used with the + * Intel 82420EX PCIset. + * + * There are only two PIRQ Route Control registers, available in the + * combined 82425EX/82426EX PCI configuration space, at 0x66 and 0x67 + * for the PIRQ0# and PIRQ1# lines respectively. The semantics is + * the same as with the PIIX router. + * + * References: + * + * "82420EX PCIset Data Sheet, 82425EX PCI System Controller (PSC) + * and 82426EX ISA Bridge (IB)", Intel Corporation, Order Number: + * 290488-004, December 1995 + */ + +#define PCI_I82426EX_PIRQ_ROUTE_CONTROL 0x66u + +static int pirq_ib_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + int reg; + u8 x; + + reg = pirq; + if (reg >= 1 && reg <= 2) + reg += PCI_I82426EX_PIRQ_ROUTE_CONTROL - 1; + + pci_read_config_byte(router, reg, &x); + return (x < 16) ? x : 0; +} + +static int pirq_ib_set(struct pci_dev *router, struct pci_dev *dev, int pirq, + int irq) +{ + int reg; + + reg = pirq; + if (reg >= 1 && reg <= 2) + reg += PCI_I82426EX_PIRQ_ROUTE_CONTROL - 1; + + pci_write_config_byte(router, reg, irq); + return 1; +} + +/* + * The VIA pirq rules are nibble-based, like ALI, + * but without the ugly irq number munging. + * However, PIRQD is in the upper instead of lower 4 bits. + */ +static int pirq_via_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + return read_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq); +} + +static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + write_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq, irq); + return 1; +} + +/* + * The VIA pirq rules are nibble-based, like ALI, + * but without the ugly irq number munging. + * However, for 82C586, nibble map is different . + */ +static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 }; + + WARN_ON_ONCE(pirq > 5); + return read_config_nybble(router, 0x55, pirqmap[pirq-1]); +} + +static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 }; + + WARN_ON_ONCE(pirq > 5); + write_config_nybble(router, 0x55, pirqmap[pirq-1], irq); + return 1; +} + +/* + * ITE 8330G pirq rules are nibble-based + * FIXME: pirqmap may be { 1, 0, 3, 2 }, + * 2+3 are both mapped to irq 9 on my system + */ +static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + static const unsigned char pirqmap[4] = { 1, 0, 2, 3 }; + + WARN_ON_ONCE(pirq > 4); + return read_config_nybble(router, 0x43, pirqmap[pirq-1]); +} + +static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + static const unsigned char pirqmap[4] = { 1, 0, 2, 3 }; + + WARN_ON_ONCE(pirq > 4); + write_config_nybble(router, 0x43, pirqmap[pirq-1], irq); + return 1; +} + +/* + * OPTI: high four bits are nibble pointer.. + * I wonder what the low bits do? + */ +static int pirq_opti_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + return read_config_nybble(router, 0xb8, pirq >> 4); +} + +static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + write_config_nybble(router, 0xb8, pirq >> 4, irq); + return 1; +} + +/* + * Cyrix: nibble offset 0x5C + * 0x5C bits 7:4 is INTB bits 3:0 is INTA + * 0x5D bits 7:4 is INTD bits 3:0 is INTC + */ +static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + return read_config_nybble(router, 0x5C, (pirq-1)^1); +} + +static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + write_config_nybble(router, 0x5C, (pirq-1)^1, irq); + return 1; +} + + +/* + * PIRQ routing for the SiS85C497 AT Bus Controller & Megacell (ATM) + * ISA bridge used with the SiS 85C496/497 486 Green PC VESA/ISA/PCI + * Chipset. + * + * There are four PCI INTx#-to-IRQ Link registers provided in the + * SiS85C497 part of the peculiar combined 85C496/497 configuration + * space decoded by the SiS85C496 PCI & CPU Memory Controller (PCM) + * host bridge, at 0xc0/0xc1/0xc2/0xc3 respectively for the PCI INT + * A/B/C/D lines. Bit 7 enables the respective link if set and bits + * 3:0 select the 8259A IRQ line as follows: + * + * 0000 : Reserved + * 0001 : Reserved + * 0010 : Reserved + * 0011 : IRQ3 + * 0100 : IRQ4 + * 0101 : IRQ5 + * 0110 : IRQ6 + * 0111 : IRQ7 + * 1000 : Reserved + * 1001 : IRQ9 + * 1010 : IRQ10 + * 1011 : IRQ11 + * 1100 : IRQ12 + * 1101 : Reserved + * 1110 : IRQ14 + * 1111 : IRQ15 + * + * We avoid using a reserved value for disabled links, hence the + * choice of IRQ15 for that case. + * + * References: + * + * "486 Green PC VESA/ISA/PCI Chipset, SiS 85C496/497", Rev 3.0, + * Silicon Integrated Systems Corp., July 1995 + */ + +#define PCI_SIS497_INTA_TO_IRQ_LINK 0xc0u + +#define PIRQ_SIS497_IRQ_MASK 0x0fu +#define PIRQ_SIS497_IRQ_ENABLE 0x80u + +static int pirq_sis497_get(struct pci_dev *router, struct pci_dev *dev, + int pirq) +{ + int reg; + u8 x; + + reg = pirq; + if (reg >= 1 && reg <= 4) + reg += PCI_SIS497_INTA_TO_IRQ_LINK - 1; + + pci_read_config_byte(router, reg, &x); + return (x & PIRQ_SIS497_IRQ_ENABLE) ? (x & PIRQ_SIS497_IRQ_MASK) : 0; +} + +static int pirq_sis497_set(struct pci_dev *router, struct pci_dev *dev, + int pirq, int irq) +{ + int reg; + u8 x; + + reg = pirq; + if (reg >= 1 && reg <= 4) + reg += PCI_SIS497_INTA_TO_IRQ_LINK - 1; + + pci_read_config_byte(router, reg, &x); + x &= ~(PIRQ_SIS497_IRQ_MASK | PIRQ_SIS497_IRQ_ENABLE); + x |= irq ? (PIRQ_SIS497_IRQ_ENABLE | irq) : PIRQ_SIS497_IRQ_MASK; + pci_write_config_byte(router, reg, x); + return 1; +} + +/* + * PIRQ routing for SiS 85C503 router used in several SiS chipsets. + * We have to deal with the following issues here: + * - vendors have different ideas about the meaning of link values + * - some onboard devices (integrated in the chipset) have special + * links and are thus routed differently (i.e. not via PCI INTA-INTD) + * - different revision of the router have a different layout for + * the routing registers, particularly for the onchip devices + * + * For all routing registers the common thing is we have one byte + * per routeable link which is defined as: + * bit 7 IRQ mapping enabled (0) or disabled (1) + * bits [6:4] reserved (sometimes used for onchip devices) + * bits [3:0] IRQ to map to + * allowed: 3-7, 9-12, 14-15 + * reserved: 0, 1, 2, 8, 13 + * + * The config-space registers located at 0x41/0x42/0x43/0x44 are + * always used to route the normal PCI INT A/B/C/D respectively. + * Apparently there are systems implementing PCI routing table using + * link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D. + * We try our best to handle both link mappings. + * + * Currently (2003-05-21) it appears most SiS chipsets follow the + * definition of routing registers from the SiS-5595 southbridge. + * According to the SiS 5595 datasheets the revision id's of the + * router (ISA-bridge) should be 0x01 or 0xb0. + * + * Furthermore we've also seen lspci dumps with revision 0x00 and 0xb1. + * Looks like these are used in a number of SiS 5xx/6xx/7xx chipsets. + * They seem to work with the current routing code. However there is + * some concern because of the two USB-OHCI HCs (original SiS 5595 + * had only one). YMMV. + * + * Onchip routing for router rev-id 0x01/0xb0 and probably 0x00/0xb1: + * + * 0x61: IDEIRQ: + * bits [6:5] must be written 01 + * bit 4 channel-select primary (0), secondary (1) + * + * 0x62: USBIRQ: + * bit 6 OHCI function disabled (0), enabled (1) + * + * 0x6a: ACPI/SCI IRQ: bits 4-6 reserved + * + * 0x7e: Data Acq. Module IRQ - bits 4-6 reserved + * + * We support USBIRQ (in addition to INTA-INTD) and keep the + * IDE, ACPI and DAQ routing untouched as set by the BIOS. + * + * Currently the only reported exception is the new SiS 65x chipset + * which includes the SiS 69x southbridge. Here we have the 85C503 + * router revision 0x04 and there are changes in the register layout + * mostly related to the different USB HCs with USB 2.0 support. + * + * Onchip routing for router rev-id 0x04 (try-and-error observation) + * + * 0x60/0x61/0x62/0x63: 1xEHCI and 3xOHCI (companion) USB-HCs + * bit 6-4 are probably unused, not like 5595 + */ + +#define PIRQ_SIS503_IRQ_MASK 0x0f +#define PIRQ_SIS503_IRQ_DISABLE 0x80 +#define PIRQ_SIS503_USB_ENABLE 0x40 + +static int pirq_sis503_get(struct pci_dev *router, struct pci_dev *dev, + int pirq) +{ + u8 x; + int reg; + + reg = pirq; + if (reg >= 0x01 && reg <= 0x04) + reg += 0x40; + pci_read_config_byte(router, reg, &x); + return (x & PIRQ_SIS503_IRQ_DISABLE) ? 0 : (x & PIRQ_SIS503_IRQ_MASK); +} + +static int pirq_sis503_set(struct pci_dev *router, struct pci_dev *dev, + int pirq, int irq) +{ + u8 x; + int reg; + + reg = pirq; + if (reg >= 0x01 && reg <= 0x04) + reg += 0x40; + pci_read_config_byte(router, reg, &x); + x &= ~(PIRQ_SIS503_IRQ_MASK | PIRQ_SIS503_IRQ_DISABLE); + x |= irq ? irq : PIRQ_SIS503_IRQ_DISABLE; + pci_write_config_byte(router, reg, x); + return 1; +} + + +/* + * VLSI: nibble offset 0x74 - educated guess due to routing table and + * config space of VLSI 82C534 PCI-bridge/router (1004:0102) + * Tested on HP OmniBook 800 covering PIRQ 1, 2, 4, 8 for onboard + * devices, PIRQ 3 for non-pci(!) soundchip and (untested) PIRQ 6 + * for the busbridge to the docking station. + */ + +static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + WARN_ON_ONCE(pirq >= 9); + if (pirq > 8) { + dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq); + return 0; + } + return read_config_nybble(router, 0x74, pirq-1); +} + +static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + WARN_ON_ONCE(pirq >= 9); + if (pirq > 8) { + dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq); + return 0; + } + write_config_nybble(router, 0x74, pirq-1, irq); + return 1; +} + +/* + * ServerWorks: PCI interrupts mapped to system IRQ lines through Index + * and Redirect I/O registers (0x0c00 and 0x0c01). The Index register + * format is (PCIIRQ## | 0x10), e.g.: PCIIRQ10=0x1a. The Redirect + * register is a straight binary coding of desired PIC IRQ (low nibble). + * + * The 'link' value in the PIRQ table is already in the correct format + * for the Index register. There are some special index values: + * 0x00 for ACPI (SCI), 0x01 for USB, 0x02 for IDE0, 0x04 for IDE1, + * and 0x03 for SMBus. + */ +static int pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + outb(pirq, 0xc00); + return inb(0xc01) & 0xf; +} + +static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, + int pirq, int irq) +{ + outb(pirq, 0xc00); + outb(irq, 0xc01); + return 1; +} + +/* Support for AMD756 PCI IRQ Routing + * Jhon H. Caicedo + * Jun/21/2001 0.2.0 Release, fixed to use "nybble" functions... (jhcaiced) + * Jun/19/2001 Alpha Release 0.1.0 (jhcaiced) + * The AMD756 pirq rules are nibble-based + * offset 0x56 0-3 PIRQA 4-7 PIRQB + * offset 0x57 0-3 PIRQC 4-7 PIRQD + */ +static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + u8 irq; + irq = 0; + if (pirq <= 4) + irq = read_config_nybble(router, 0x56, pirq - 1); + dev_info(&dev->dev, + "AMD756: dev [%04x:%04x], router PIRQ %d get IRQ %d\n", + dev->vendor, dev->device, pirq, irq); + return irq; +} + +static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + dev_info(&dev->dev, + "AMD756: dev [%04x:%04x], router PIRQ %d set IRQ %d\n", + dev->vendor, dev->device, pirq, irq); + if (pirq <= 4) + write_config_nybble(router, 0x56, pirq - 1, irq); + return 1; +} + +/* + * PicoPower PT86C523 + */ +static int pirq_pico_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +{ + outb(0x10 + ((pirq - 1) >> 1), 0x24); + return ((pirq - 1) & 1) ? (inb(0x26) >> 4) : (inb(0x26) & 0xf); +} + +static int pirq_pico_set(struct pci_dev *router, struct pci_dev *dev, int pirq, + int irq) +{ + unsigned int x; + outb(0x10 + ((pirq - 1) >> 1), 0x24); + x = inb(0x26); + x = ((pirq - 1) & 1) ? ((x & 0x0f) | (irq << 4)) : ((x & 0xf0) | (irq)); + outb(x, 0x26); + return 1; +} + +#ifdef CONFIG_PCI_BIOS + +static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +{ + struct pci_dev *bridge; + int pin = pci_get_interrupt_pin(dev, &bridge); + return pcibios_set_irq_routing(bridge, pin - 1, irq); +} + +#endif + +static __init int intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + static struct pci_device_id __initdata pirq_440gx[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2) }, + { }, + }; + + /* 440GX has a proprietary PIRQ router -- don't use it */ + if (pci_dev_present(pirq_440gx)) + return 0; + + switch (device) { + case PCI_DEVICE_ID_INTEL_82375: + r->name = "PCEB/ESC"; + r->get = pirq_esc_get; + r->set = pirq_esc_set; + return 1; + case PCI_DEVICE_ID_INTEL_82371FB_0: + case PCI_DEVICE_ID_INTEL_82371SB_0: + case PCI_DEVICE_ID_INTEL_82371AB_0: + case PCI_DEVICE_ID_INTEL_82371MX: + case PCI_DEVICE_ID_INTEL_82443MX_0: + case PCI_DEVICE_ID_INTEL_82801AA_0: + case PCI_DEVICE_ID_INTEL_82801AB_0: + case PCI_DEVICE_ID_INTEL_82801BA_0: + case PCI_DEVICE_ID_INTEL_82801BA_10: + case PCI_DEVICE_ID_INTEL_82801CA_0: + case PCI_DEVICE_ID_INTEL_82801CA_12: + case PCI_DEVICE_ID_INTEL_82801DB_0: + case PCI_DEVICE_ID_INTEL_82801E_0: + case PCI_DEVICE_ID_INTEL_82801EB_0: + case PCI_DEVICE_ID_INTEL_ESB_1: + case PCI_DEVICE_ID_INTEL_ICH6_0: + case PCI_DEVICE_ID_INTEL_ICH6_1: + case PCI_DEVICE_ID_INTEL_ICH7_0: + case PCI_DEVICE_ID_INTEL_ICH7_1: + case PCI_DEVICE_ID_INTEL_ICH7_30: + case PCI_DEVICE_ID_INTEL_ICH7_31: + case PCI_DEVICE_ID_INTEL_TGP_LPC: + case PCI_DEVICE_ID_INTEL_ESB2_0: + case PCI_DEVICE_ID_INTEL_ICH8_0: + case PCI_DEVICE_ID_INTEL_ICH8_1: + case PCI_DEVICE_ID_INTEL_ICH8_2: + case PCI_DEVICE_ID_INTEL_ICH8_3: + case PCI_DEVICE_ID_INTEL_ICH8_4: + case PCI_DEVICE_ID_INTEL_ICH9_0: + case PCI_DEVICE_ID_INTEL_ICH9_1: + case PCI_DEVICE_ID_INTEL_ICH9_2: + case PCI_DEVICE_ID_INTEL_ICH9_3: + case PCI_DEVICE_ID_INTEL_ICH9_4: + case PCI_DEVICE_ID_INTEL_ICH9_5: + case PCI_DEVICE_ID_INTEL_EP80579_0: + case PCI_DEVICE_ID_INTEL_ICH10_0: + case PCI_DEVICE_ID_INTEL_ICH10_1: + case PCI_DEVICE_ID_INTEL_ICH10_2: + case PCI_DEVICE_ID_INTEL_ICH10_3: + case PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0: + case PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1: + r->name = "PIIX/ICH"; + r->get = pirq_piix_get; + r->set = pirq_piix_set; + return 1; + case PCI_DEVICE_ID_INTEL_82425: + r->name = "PSC/IB"; + r->get = pirq_ib_get; + r->set = pirq_ib_set; + return 1; + } + + if ((device >= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN && + device <= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX) + || (device >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN && + device <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX) + || (device >= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN && + device <= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX) + || (device >= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN && + device <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX)) { + r->name = "PIIX/ICH"; + r->get = pirq_piix_get; + r->set = pirq_piix_set; + return 1; + } + + return 0; +} + +static __init int via_router_probe(struct irq_router *r, + struct pci_dev *router, u16 device) +{ + /* FIXME: We should move some of the quirk fixup stuff here */ + + /* + * workarounds for some buggy BIOSes + */ + if (device == PCI_DEVICE_ID_VIA_82C586_0) { + switch (router->device) { + case PCI_DEVICE_ID_VIA_82C686: + /* + * Asus k7m bios wrongly reports 82C686A + * as 586-compatible + */ + device = PCI_DEVICE_ID_VIA_82C686; + break; + case PCI_DEVICE_ID_VIA_8235: + /** + * Asus a7v-x bios wrongly reports 8235 + * as 586-compatible + */ + device = PCI_DEVICE_ID_VIA_8235; + break; + case PCI_DEVICE_ID_VIA_8237: + /** + * Asus a7v600 bios wrongly reports 8237 + * as 586-compatible + */ + device = PCI_DEVICE_ID_VIA_8237; + break; + } + } + + switch (device) { + case PCI_DEVICE_ID_VIA_82C586_0: + r->name = "VIA"; + r->get = pirq_via586_get; + r->set = pirq_via586_set; + return 1; + case PCI_DEVICE_ID_VIA_82C596: + case PCI_DEVICE_ID_VIA_82C686: + case PCI_DEVICE_ID_VIA_8231: + case PCI_DEVICE_ID_VIA_8233A: + case PCI_DEVICE_ID_VIA_8235: + case PCI_DEVICE_ID_VIA_8237: + /* FIXME: add new ones for 8233/5 */ + r->name = "VIA"; + r->get = pirq_via_get; + r->set = pirq_via_set; + return 1; + } + return 0; +} + +static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + switch (device) { + case PCI_DEVICE_ID_VLSI_82C534: + r->name = "VLSI 82C534"; + r->get = pirq_vlsi_get; + r->set = pirq_vlsi_set; + return 1; + } + return 0; +} + + +static __init int serverworks_router_probe(struct irq_router *r, + struct pci_dev *router, u16 device) +{ + switch (device) { + case PCI_DEVICE_ID_SERVERWORKS_OSB4: + case PCI_DEVICE_ID_SERVERWORKS_CSB5: + r->name = "ServerWorks"; + r->get = pirq_serverworks_get; + r->set = pirq_serverworks_set; + return 1; + } + return 0; +} + +static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + switch (device) { + case PCI_DEVICE_ID_SI_496: + r->name = "SiS85C497"; + r->get = pirq_sis497_get; + r->set = pirq_sis497_set; + return 1; + case PCI_DEVICE_ID_SI_503: + r->name = "SiS85C503"; + r->get = pirq_sis503_get; + r->set = pirq_sis503_set; + return 1; + } + return 0; +} + +static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + switch (device) { + case PCI_DEVICE_ID_CYRIX_5520: + r->name = "NatSemi"; + r->get = pirq_cyrix_get; + r->set = pirq_cyrix_set; + return 1; + } + return 0; +} + +static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + switch (device) { + case PCI_DEVICE_ID_OPTI_82C700: + r->name = "OPTI"; + r->get = pirq_opti_get; + r->set = pirq_opti_set; + return 1; + } + return 0; +} + +static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + switch (device) { + case PCI_DEVICE_ID_ITE_IT8330G_0: + r->name = "ITE"; + r->get = pirq_ite_get; + r->set = pirq_ite_set; + return 1; + } + return 0; +} + +static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + switch (device) { + case PCI_DEVICE_ID_AL_M1489: + r->name = "FinALi"; + r->get = pirq_finali_get; + r->set = pirq_finali_set; + r->lvl = pirq_finali_lvl; + return 1; + case PCI_DEVICE_ID_AL_M1533: + case PCI_DEVICE_ID_AL_M1563: + r->name = "ALI"; + r->get = pirq_ali_get; + r->set = pirq_ali_set; + return 1; + } + return 0; +} + +static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + switch (device) { + case PCI_DEVICE_ID_AMD_VIPER_740B: + r->name = "AMD756"; + break; + case PCI_DEVICE_ID_AMD_VIPER_7413: + r->name = "AMD766"; + break; + case PCI_DEVICE_ID_AMD_VIPER_7443: + r->name = "AMD768"; + break; + default: + return 0; + } + r->get = pirq_amd756_get; + r->set = pirq_amd756_set; + return 1; +} + +static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +{ + switch (device) { + case PCI_DEVICE_ID_PICOPOWER_PT86C523: + r->name = "PicoPower PT86C523"; + r->get = pirq_pico_get; + r->set = pirq_pico_set; + return 1; + + case PCI_DEVICE_ID_PICOPOWER_PT86C523BBP: + r->name = "PicoPower PT86C523 rev. BB+"; + r->get = pirq_pico_get; + r->set = pirq_pico_set; + return 1; + } + return 0; +} + +static __initdata struct irq_router_handler pirq_routers[] = { + { PCI_VENDOR_ID_INTEL, intel_router_probe }, + { PCI_VENDOR_ID_AL, ali_router_probe }, + { PCI_VENDOR_ID_ITE, ite_router_probe }, + { PCI_VENDOR_ID_VIA, via_router_probe }, + { PCI_VENDOR_ID_OPTI, opti_router_probe }, + { PCI_VENDOR_ID_SI, sis_router_probe }, + { PCI_VENDOR_ID_CYRIX, cyrix_router_probe }, + { PCI_VENDOR_ID_VLSI, vlsi_router_probe }, + { PCI_VENDOR_ID_SERVERWORKS, serverworks_router_probe }, + { PCI_VENDOR_ID_AMD, amd_router_probe }, + { PCI_VENDOR_ID_PICOPOWER, pico_router_probe }, + /* Someone with docs needs to add the ATI Radeon IGP */ + { 0, NULL } +}; +static struct irq_router pirq_router; +static struct pci_dev *pirq_router_dev; + + +/* + * FIXME: should we have an option to say "generic for + * chipset" ? + */ + +static bool __init pirq_try_router(struct irq_router *r, + struct irq_routing_table *rt, + struct pci_dev *dev) +{ + struct irq_router_handler *h; + + DBG(KERN_DEBUG "PCI: Trying IRQ router for [%04x:%04x]\n", + dev->vendor, dev->device); + + for (h = pirq_routers; h->vendor; h++) { + /* First look for a router match */ + if (rt->rtr_vendor == h->vendor && + h->probe(r, dev, rt->rtr_device)) + return true; + /* Fall back to a device match */ + if (dev->vendor == h->vendor && + h->probe(r, dev, dev->device)) + return true; + } + return false; +} + +static void __init pirq_find_router(struct irq_router *r) +{ + struct irq_routing_table *rt = pirq_table; + struct pci_dev *dev; + +#ifdef CONFIG_PCI_BIOS + if (!rt->signature) { + printk(KERN_INFO "PCI: Using BIOS for IRQ routing\n"); + r->set = pirq_bios_set; + r->name = "BIOS"; + return; + } +#endif + + /* Default unless a driver reloads it */ + r->name = "default"; + r->get = NULL; + r->set = NULL; + + DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for [%04x:%04x]\n", + rt->rtr_vendor, rt->rtr_device); + + /* Use any vendor:device provided by the routing table or try all. */ + if (rt->rtr_vendor) { + dev = pci_get_domain_bus_and_slot(0, rt->rtr_bus, + rt->rtr_devfn); + if (dev && pirq_try_router(r, rt, dev)) + pirq_router_dev = dev; + } else { + dev = NULL; + for_each_pci_dev(dev) { + if (pirq_try_router(r, rt, dev)) { + pirq_router_dev = dev; + break; + } + } + } + + if (pirq_router_dev) + dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x:%04x]\n", + pirq_router.name, + pirq_router_dev->vendor, pirq_router_dev->device); + else + DBG(KERN_DEBUG "PCI: Interrupt router not found at " + "%02x:%02x\n", rt->rtr_bus, rt->rtr_devfn); + + /* The device remains referenced for the kernel lifetime */ +} + +/* + * We're supposed to match on the PCI device only and not the function, + * but some BIOSes build their tables with the PCI function included + * for motherboard devices, so if a complete match is found, then give + * it precedence over a slot match. + */ +static struct irq_info *pirq_get_dev_info(struct pci_dev *dev) +{ + struct irq_routing_table *rt = pirq_table; + int entries = (rt->size - sizeof(struct irq_routing_table)) / + sizeof(struct irq_info); + struct irq_info *slotinfo = NULL; + struct irq_info *info; + + for (info = rt->slots; entries--; info++) + if (info->bus == dev->bus->number) { + if (info->devfn == dev->devfn) + return info; + if (!slotinfo && + PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn)) + slotinfo = info; + } + return slotinfo; +} + +/* + * Buses behind bridges are typically not listed in the PIRQ routing table. + * Do the usual dance then and walk the tree of bridges up adjusting the + * pin number accordingly on the way until the originating root bus device + * has been reached and then use its routing information. + */ +static struct irq_info *pirq_get_info(struct pci_dev *dev, u8 *pin) +{ + struct pci_dev *temp_dev = dev; + struct irq_info *info; + u8 temp_pin = *pin; + u8 dpin = temp_pin; + + info = pirq_get_dev_info(dev); + while (!info && temp_dev->bus->parent) { + struct pci_dev *bridge = temp_dev->bus->self; + + temp_pin = pci_swizzle_interrupt_pin(temp_dev, temp_pin); + info = pirq_get_dev_info(bridge); + if (info) + dev_warn(&dev->dev, + "using bridge %s INT %c to get INT %c\n", + pci_name(bridge), + 'A' + temp_pin - 1, 'A' + dpin - 1); + + temp_dev = bridge; + } + *pin = temp_pin; + return info; +} + +static int pcibios_lookup_irq(struct pci_dev *dev, int assign) +{ + struct irq_info *info; + int i, pirq, newirq; + u8 dpin, pin; + int irq = 0; + u32 mask; + struct irq_router *r = &pirq_router; + struct pci_dev *dev2 = NULL; + char *msg = NULL; + + /* Find IRQ pin */ + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &dpin); + if (!dpin) { + dev_dbg(&dev->dev, "no interrupt pin\n"); + return 0; + } + + if (io_apic_assign_pci_irqs) + return 0; + + /* Find IRQ routing entry */ + + if (!pirq_table) + return 0; + + pin = dpin; + info = pirq_get_info(dev, &pin); + if (!info) { + dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n", + 'A' + dpin - 1); + return 0; + } + pirq = info->irq[pin - 1].link; + mask = info->irq[pin - 1].bitmap; + if (!pirq) { + dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + dpin - 1); + return 0; + } + dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x", + 'A' + dpin - 1, pirq, mask, pirq_table->exclusive_irqs); + mask &= pcibios_irq_mask; + + /* Work around broken HP Pavilion Notebooks which assign USB to + IRQ 9 even though it is actually wired to IRQ 11 */ + + if (broken_hp_bios_irq9 && pirq == 0x59 && dev->irq == 9) { + dev->irq = 11; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); + r->set(pirq_router_dev, dev, pirq, 11); + } + + /* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */ + if (acer_tm360_irqrouting && dev->irq == 11 && + dev->vendor == PCI_VENDOR_ID_O2) { + pirq = 0x68; + mask = 0x400; + dev->irq = r->get(pirq_router_dev, dev, pirq); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } + + /* + * Find the best IRQ to assign: use the one + * reported by the device if possible. + */ + newirq = dev->irq; + if (newirq && !((1 << newirq) & mask)) { + if (pci_probe & PCI_USE_PIRQ_MASK) + newirq = 0; + else + dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask " + "%#x; try pci=usepirqmask\n", newirq, mask); + } + if (!newirq && assign) { + for (i = 0; i < 16; i++) { + if (!(mask & (1 << i))) + continue; + if (pirq_penalty[i] < pirq_penalty[newirq] && + can_request_irq(i, IRQF_SHARED)) + newirq = i; + } + } + dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + dpin - 1, newirq); + + /* Check if it is hardcoded */ + if ((pirq & 0xf0) == 0xf0) { + irq = pirq & 0xf; + msg = "hardcoded"; + } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \ + ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) { + msg = "found"; + if (r->lvl) + r->lvl(pirq_router_dev, dev, pirq, irq); + else + elcr_set_level_irq(irq); + } else if (newirq && r->set && + (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) { + if (r->set(pirq_router_dev, dev, pirq, newirq)) { + if (r->lvl) + r->lvl(pirq_router_dev, dev, pirq, newirq); + else + elcr_set_level_irq(newirq); + msg = "assigned"; + irq = newirq; + } + } + + if (!irq) { + if (newirq && mask == (1 << newirq)) { + msg = "guessed"; + irq = newirq; + } else { + dev_dbg(&dev->dev, "can't route interrupt\n"); + return 0; + } + } + dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", + msg, 'A' + dpin - 1, irq); + + /* Update IRQ for all devices with the same pirq value */ + for_each_pci_dev(dev2) { + pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &dpin); + if (!dpin) + continue; + + pin = dpin; + info = pirq_get_info(dev2, &pin); + if (!info) + continue; + if (info->irq[pin - 1].link == pirq) { + /* + * We refuse to override the dev->irq + * information. Give a warning! + */ + if (dev2->irq && dev2->irq != irq && \ + (!(pci_probe & PCI_USE_PIRQ_MASK) || \ + ((1 << dev2->irq) & mask))) { +#ifndef CONFIG_PCI_MSI + dev_info(&dev2->dev, "IRQ routing conflict: " + "have IRQ %d, want IRQ %d\n", + dev2->irq, irq); +#endif + continue; + } + dev2->irq = irq; + pirq_penalty[irq]++; + if (dev != dev2) + dev_info(&dev->dev, "sharing IRQ %d with %s\n", + irq, pci_name(dev2)); + } + } + return 1; +} + +void __init pcibios_fixup_irqs(void) +{ + struct pci_dev *dev = NULL; + u8 pin; + + DBG(KERN_DEBUG "PCI: IRQ fixup\n"); + for_each_pci_dev(dev) { + /* + * If the BIOS has set an out of range IRQ number, just + * ignore it. Also keep track of which IRQ's are + * already in use. + */ + if (dev->irq >= 16) { + dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq); + dev->irq = 0; + } + /* + * If the IRQ is already assigned to a PCI device, + * ignore its ISA use penalty + */ + if (pirq_penalty[dev->irq] >= 100 && + pirq_penalty[dev->irq] < 100000) + pirq_penalty[dev->irq] = 0; + pirq_penalty[dev->irq]++; + } + + if (io_apic_assign_pci_irqs) + return; + + dev = NULL; + for_each_pci_dev(dev) { + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + if (!pin) + continue; + + /* + * Still no IRQ? Try to lookup one... + */ + if (!dev->irq) + pcibios_lookup_irq(dev, 0); + } +} + +/* + * Work around broken HP Pavilion Notebooks which assign USB to + * IRQ 9 even though it is actually wired to IRQ 11 + */ +static int __init fix_broken_hp_bios_irq9(const struct dmi_system_id *d) +{ + if (!broken_hp_bios_irq9) { + broken_hp_bios_irq9 = 1; + printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", + d->ident); + } + return 0; +} + +/* + * Work around broken Acer TravelMate 360 Notebooks which assign + * Cardbus to IRQ 11 even though it is actually wired to IRQ 10 + */ +static int __init fix_acer_tm360_irqrouting(const struct dmi_system_id *d) +{ + if (!acer_tm360_irqrouting) { + acer_tm360_irqrouting = 1; + printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", + d->ident); + } + return 0; +} + +static const struct dmi_system_id pciirq_dmi_table[] __initconst = { + { + .callback = fix_broken_hp_bios_irq9, + .ident = "HP Pavilion N5400 Series Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"), + DMI_MATCH(DMI_PRODUCT_VERSION, + "HP Pavilion Notebook Model GE"), + DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"), + }, + }, + { + .callback = fix_acer_tm360_irqrouting, + .ident = "Acer TravelMate 36x Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), + }, + }, + { } +}; + +void __init pcibios_irq_init(void) +{ + struct irq_routing_table *rtable = NULL; + + DBG(KERN_DEBUG "PCI: IRQ init\n"); + + if (raw_pci_ops == NULL) + return; + + dmi_check_system(pciirq_dmi_table); + + pirq_table = pirq_find_routing_table(); + +#ifdef CONFIG_PCI_BIOS + if (!pirq_table && (pci_probe & PCI_BIOS_IRQ_SCAN)) { + pirq_table = pcibios_get_irq_routing_table(); + rtable = pirq_table; + } +#endif + if (pirq_table) { + pirq_peer_trick(); + pirq_find_router(&pirq_router); + if (pirq_table->exclusive_irqs) { + int i; + for (i = 0; i < 16; i++) + if (!(pirq_table->exclusive_irqs & (1 << i))) + pirq_penalty[i] += 100; + } + /* + * If we're using the I/O APIC, avoid using the PCI IRQ + * routing table + */ + if (io_apic_assign_pci_irqs) { + kfree(rtable); + pirq_table = NULL; + } + } + + x86_init.pci.fixup_irqs(); + + if (io_apic_assign_pci_irqs && pci_routeirq) { + struct pci_dev *dev = NULL; + /* + * PCI IRQ routing is set up by pci_enable_device(), but we + * also do it here in case there are still broken drivers that + * don't use pci_enable_device(). + */ + printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n"); + for_each_pci_dev(dev) + pirq_enable_irq(dev); + } +} + +static void pirq_penalize_isa_irq(int irq, int active) +{ + /* + * If any ISAPnP device reports an IRQ in its list of possible + * IRQ's, we try to avoid assigning it to PCI devices. + */ + if (irq < 16) { + if (active) + pirq_penalty[irq] += 1000; + else + pirq_penalty[irq] += 100; + } +} + +void pcibios_penalize_isa_irq(int irq, int active) +{ +#ifdef CONFIG_ACPI + if (!acpi_noirq) + acpi_penalize_isa_irq(irq, active); + else +#endif + pirq_penalize_isa_irq(irq, active); +} + +static int pirq_enable_irq(struct pci_dev *dev) +{ + u8 pin = 0; + + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + if (pin && !pcibios_lookup_irq(dev, 1)) { + char *msg = ""; + + if (!io_apic_assign_pci_irqs && dev->irq) + return 0; + + if (io_apic_assign_pci_irqs) { +#ifdef CONFIG_X86_IO_APIC + struct pci_dev *temp_dev; + int irq; + + if (dev->irq_managed && dev->irq > 0) + return 0; + + irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, + PCI_SLOT(dev->devfn), pin - 1); + /* + * Busses behind bridges are typically not listed in the MP-table. + * In this case we have to look up the IRQ based on the parent bus, + * parent slot, and pin number. The SMP code detects such bridged + * busses itself so we should get into this branch reliably. + */ + temp_dev = dev; + while (irq < 0 && dev->bus->parent) { /* go back to the bridge */ + struct pci_dev *bridge = dev->bus->self; + + pin = pci_swizzle_interrupt_pin(dev, pin); + irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, + PCI_SLOT(bridge->devfn), + pin - 1); + if (irq >= 0) + dev_warn(&dev->dev, "using bridge %s " + "INT %c to get IRQ %d\n", + pci_name(bridge), 'A' + pin - 1, + irq); + dev = bridge; + } + dev = temp_dev; + if (irq >= 0) { + dev->irq_managed = 1; + dev->irq = irq; + dev_info(&dev->dev, "PCI->APIC IRQ transform: " + "INT %c -> IRQ %d\n", 'A' + pin - 1, irq); + return 0; + } else + msg = "; probably buggy MP table"; +#endif + } else if (pci_probe & PCI_BIOS_IRQ_SCAN) + msg = ""; + else + msg = "; please try using pci=biosirq"; + + /* + * With IDE legacy devices the IRQ lookup failure is not + * a problem.. + */ + if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && + !(dev->class & 0x5)) + return 0; + + dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n", + 'A' + pin - 1, msg); + } + return 0; +} + +bool mp_should_keep_irq(struct device *dev) +{ + if (dev->power.is_prepared) + return true; +#ifdef CONFIG_PM + if (dev->power.runtime_status == RPM_SUSPENDING) + return true; +#endif + + return false; +} + +static void pirq_disable_irq(struct pci_dev *dev) +{ + if (io_apic_assign_pci_irqs && !mp_should_keep_irq(&dev->dev) && + dev->irq_managed && dev->irq) { + mp_unmap_irq(dev->irq); + dev->irq = 0; + dev->irq_managed = 0; + } +} -- cgit v1.2.3