From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/ata/sata_via.c | 758 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 758 insertions(+) create mode 100644 drivers/ata/sata_via.c (limited to 'drivers/ata/sata_via.c') diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c new file mode 100644 index 000000000..c7891cc84 --- /dev/null +++ b/drivers/ata/sata_via.c @@ -0,0 +1,758 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * sata_via.c - VIA Serial ATA controllers + * + * Maintained by: Tejun Heo + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2004 Red Hat, Inc. All rights reserved. + * Copyright 2003-2004 Jeff Garzik + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/driver-api/libata.rst + * + * Hardware documentation available under NDA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_via" +#define DRV_VERSION "2.6" + +/* + * vt8251 is different from other sata controllers of VIA. It has two + * channels, each channel has both Master and Slave slot. + */ +enum board_ids_enum { + vt6420, + vt6421, + vt8251, +}; + +enum { + SATA_CHAN_ENAB = 0x40, /* SATA channel enable */ + SATA_INT_GATE = 0x41, /* SATA interrupt gating */ + SATA_NATIVE_MODE = 0x42, /* Native mode enable */ + SVIA_MISC_3 = 0x46, /* Miscellaneous Control III */ + PATA_UDMA_TIMING = 0xB3, /* PATA timing for DMA/ cable detect */ + PATA_PIO_TIMING = 0xAB, /* PATA timing register */ + + PORT0 = (1 << 1), + PORT1 = (1 << 0), + ALL_PORTS = PORT0 | PORT1, + + NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4), + + SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */ + + SATA_HOTPLUG = (1 << 5), /* enable IRQ on hotplug */ +}; + +struct svia_priv { + bool wd_workaround; +}; + +static int vt6420_hotplug; +module_param_named(vt6420_hotplug, vt6420_hotplug, int, 0644); +MODULE_PARM_DESC(vt6420_hotplug, "Enable hot-plug support for VT6420 (0=Don't support, 1=support)"); + +static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +#ifdef CONFIG_PM_SLEEP +static int svia_pci_device_resume(struct pci_dev *pdev); +#endif +static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); +static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val); +static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val); +static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); +static void svia_noop_freeze(struct ata_port *ap); +static int vt6420_prereset(struct ata_link *link, unsigned long deadline); +static void vt6420_bmdma_start(struct ata_queued_cmd *qc); +static int vt6421_pata_cable_detect(struct ata_port *ap); +static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev); +static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev); +static void vt6421_error_handler(struct ata_port *ap); + +static const struct pci_device_id svia_pci_tbl[] = { + { PCI_VDEVICE(VIA, 0x5337), vt6420 }, + { PCI_VDEVICE(VIA, 0x0591), vt6420 }, /* 2 sata chnls (Master) */ + { PCI_VDEVICE(VIA, 0x3149), vt6420 }, /* 2 sata chnls (Master) */ + { PCI_VDEVICE(VIA, 0x3249), vt6421 }, /* 2 sata chnls, 1 pata chnl */ + { PCI_VDEVICE(VIA, 0x5372), vt6420 }, + { PCI_VDEVICE(VIA, 0x7372), vt6420 }, + { PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */ + { PCI_VDEVICE(VIA, 0x9000), vt8251 }, + + { } /* terminate list */ +}; + +static struct pci_driver svia_pci_driver = { + .name = DRV_NAME, + .id_table = svia_pci_tbl, + .probe = svia_init_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = svia_pci_device_resume, +#endif + .remove = ata_pci_remove_one, +}; + +static struct scsi_host_template svia_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations svia_base_ops = { + .inherits = &ata_bmdma_port_ops, + .sff_tf_load = svia_tf_load, +}; + +static struct ata_port_operations vt6420_sata_ops = { + .inherits = &svia_base_ops, + .freeze = svia_noop_freeze, + .prereset = vt6420_prereset, + .bmdma_start = vt6420_bmdma_start, +}; + +static struct ata_port_operations vt6421_pata_ops = { + .inherits = &svia_base_ops, + .cable_detect = vt6421_pata_cable_detect, + .set_piomode = vt6421_set_pio_mode, + .set_dmamode = vt6421_set_dma_mode, +}; + +static struct ata_port_operations vt6421_sata_ops = { + .inherits = &svia_base_ops, + .scr_read = svia_scr_read, + .scr_write = svia_scr_write, + .error_handler = vt6421_error_handler, +}; + +static struct ata_port_operations vt8251_ops = { + .inherits = &svia_base_ops, + .hardreset = sata_std_hardreset, + .scr_read = vt8251_scr_read, + .scr_write = vt8251_scr_write, +}; + +static const struct ata_port_info vt6420_port_info = { + .flags = ATA_FLAG_SATA, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &vt6420_sata_ops, +}; + +static const struct ata_port_info vt6421_sport_info = { + .flags = ATA_FLAG_SATA, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &vt6421_sata_ops, +}; + +static const struct ata_port_info vt6421_pport_info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + /* No MWDMA */ + .udma_mask = ATA_UDMA6, + .port_ops = &vt6421_pata_ops, +}; + +static const struct ata_port_info vt8251_port_info = { + .flags = ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &vt8251_ops, +}; + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, svia_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) +{ + if (sc_reg > SCR_CONTROL) + return -EINVAL; + *val = ioread32(link->ap->ioaddr.scr_addr + (4 * sc_reg)); + return 0; +} + +static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) +{ + if (sc_reg > SCR_CONTROL) + return -EINVAL; + iowrite32(val, link->ap->ioaddr.scr_addr + (4 * sc_reg)); + return 0; +} + +static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val) +{ + static const u8 ipm_tbl[] = { 1, 2, 6, 0 }; + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + int slot = 2 * link->ap->port_no + link->pmp; + u32 v = 0; + u8 raw; + + switch (scr) { + case SCR_STATUS: + pci_read_config_byte(pdev, 0xA0 + slot, &raw); + + /* read the DET field, bit0 and 1 of the config byte */ + v |= raw & 0x03; + + /* read the SPD field, bit4 of the configure byte */ + if (raw & (1 << 4)) + v |= 0x02 << 4; + else + v |= 0x01 << 4; + + /* read the IPM field, bit2 and 3 of the config byte */ + v |= ipm_tbl[(raw >> 2) & 0x3]; + break; + + case SCR_ERROR: + /* devices other than 5287 uses 0xA8 as base */ + WARN_ON(pdev->device != 0x5287); + pci_read_config_dword(pdev, 0xB0 + slot * 4, &v); + break; + + case SCR_CONTROL: + pci_read_config_byte(pdev, 0xA4 + slot, &raw); + + /* read the DET field, bit0 and bit1 */ + v |= ((raw & 0x02) << 1) | (raw & 0x01); + + /* read the IPM field, bit2 and bit3 */ + v |= ((raw >> 2) & 0x03) << 8; + break; + + default: + return -EINVAL; + } + + *val = v; + return 0; +} + +static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val) +{ + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + int slot = 2 * link->ap->port_no + link->pmp; + u32 v = 0; + + switch (scr) { + case SCR_ERROR: + /* devices other than 5287 uses 0xA8 as base */ + WARN_ON(pdev->device != 0x5287); + pci_write_config_dword(pdev, 0xB0 + slot * 4, val); + return 0; + + case SCR_CONTROL: + /* set the DET field */ + v |= ((val & 0x4) >> 1) | (val & 0x1); + + /* set the IPM field */ + v |= ((val >> 8) & 0x3) << 2; + + pci_write_config_byte(pdev, 0xA4 + slot, v); + return 0; + + default: + return -EINVAL; + } +} + +/** + * svia_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller. + * + * This is to fix the internal bug of via chipsets, which will + * reset the device register after changing the IEN bit on ctl + * register. + */ +static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_taskfile ttf; + + if (tf->ctl != ap->last_ctl) { + ttf = *tf; + ttf.flags |= ATA_TFLAG_DEVICE; + tf = &ttf; + } + ata_sff_tf_load(ap, tf); +} + +static void svia_noop_freeze(struct ata_port *ap) +{ + /* Some VIA controllers choke if ATA_NIEN is manipulated in + * certain way. Leave it alone and just clear pending IRQ. + */ + ap->ops->sff_check_status(ap); + ata_bmdma_irq_clear(ap); +} + +/** + * vt6420_prereset - prereset for vt6420 + * @link: target ATA link + * @deadline: deadline jiffies for the operation + * + * SCR registers on vt6420 are pieces of shit and may hang the + * whole machine completely if accessed with the wrong timing. + * To avoid such catastrophe, vt6420 doesn't provide generic SCR + * access operations, but uses SStatus and SControl only during + * boot probing in controlled way. + * + * As the old (pre EH update) probing code is proven to work, we + * strictly follow the access pattern. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +static int vt6420_prereset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &ap->link.eh_context; + unsigned long timeout = jiffies + (HZ * 5); + u32 sstatus, scontrol; + int online; + + /* don't do any SCR stuff if we're not loading */ + if (!(ap->pflags & ATA_PFLAG_LOADING)) + goto skip_scr; + + /* Resume phy. This is the old SATA resume sequence */ + svia_scr_write(link, SCR_CONTROL, 0x300); + svia_scr_read(link, SCR_CONTROL, &scontrol); /* flush */ + + /* wait for phy to become ready, if necessary */ + do { + ata_msleep(link->ap, 200); + svia_scr_read(link, SCR_STATUS, &sstatus); + if ((sstatus & 0xf) != 1) + break; + } while (time_before(jiffies, timeout)); + + /* open code sata_print_link_status() */ + svia_scr_read(link, SCR_STATUS, &sstatus); + svia_scr_read(link, SCR_CONTROL, &scontrol); + + online = (sstatus & 0xf) == 0x3; + + ata_port_info(ap, + "SATA link %s 1.5 Gbps (SStatus %X SControl %X)\n", + online ? "up" : "down", sstatus, scontrol); + + /* SStatus is read one more time */ + svia_scr_read(link, SCR_STATUS, &sstatus); + + if (!online) { + /* tell EH to bail */ + ehc->i.action &= ~ATA_EH_RESET; + return 0; + } + + skip_scr: + /* wait for !BSY */ + ata_sff_wait_ready(link, deadline); + + return 0; +} + +static void vt6420_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + if ((qc->tf.command == ATA_CMD_PACKET) && + (qc->scsicmd->sc_data_direction == DMA_TO_DEVICE)) { + /* Prevents corruption on some ATAPI burners */ + ata_sff_pause(ap); + } + ata_bmdma_start(qc); +} + +static int vt6421_pata_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 tmp; + + pci_read_config_byte(pdev, PATA_UDMA_TIMING, &tmp); + if (tmp & 0x10) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + +static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const u8 pio_bits[] = { 0xA8, 0x65, 0x65, 0x31, 0x20 }; + pci_write_config_byte(pdev, PATA_PIO_TIMING - adev->devno, + pio_bits[adev->pio_mode - XFER_PIO_0]); +} + +static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const u8 udma_bits[] = { 0xEE, 0xE8, 0xE6, 0xE4, 0xE2, 0xE1, 0xE0, 0xE0 }; + pci_write_config_byte(pdev, PATA_UDMA_TIMING - adev->devno, + udma_bits[adev->dma_mode - XFER_UDMA_0]); +} + +static const unsigned int svia_bar_sizes[] = { + 8, 4, 8, 4, 16, 256 +}; + +static const unsigned int vt6421_bar_sizes[] = { + 16, 16, 16, 16, 32, 128 +}; + +static void __iomem *svia_scr_addr(void __iomem *addr, unsigned int port) +{ + return addr + (port * 128); +} + +static void __iomem *vt6421_scr_addr(void __iomem *addr, unsigned int port) +{ + return addr + (port * 64); +} + +static void vt6421_init_addrs(struct ata_port *ap) +{ + void __iomem * const * iomap = ap->host->iomap; + void __iomem *reg_addr = iomap[ap->port_no]; + void __iomem *bmdma_addr = iomap[4] + (ap->port_no * 8); + struct ata_ioports *ioaddr = &ap->ioaddr; + + ioaddr->cmd_addr = reg_addr; + ioaddr->altstatus_addr = + ioaddr->ctl_addr = (void __iomem *) + ((unsigned long)(reg_addr + 8) | ATA_PCI_CTL_OFS); + ioaddr->bmdma_addr = bmdma_addr; + ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no); + + ata_sff_std_ports(ioaddr); + + ata_port_pbar_desc(ap, ap->port_no, -1, "port"); + ata_port_pbar_desc(ap, 4, ap->port_no * 8, "bmdma"); +} + +static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) +{ + const struct ata_port_info *ppi[] = { &vt6420_port_info, NULL }; + struct ata_host *host; + int rc; + + if (vt6420_hotplug) { + ppi[0]->port_ops->scr_read = svia_scr_read; + ppi[0]->port_ops->scr_write = svia_scr_write; + } + + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); + if (rc) + return rc; + *r_host = host; + + rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME); + if (rc) { + dev_err(&pdev->dev, "failed to iomap PCI BAR 5\n"); + return rc; + } + + host->ports[0]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 0); + host->ports[1]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 1); + + return 0; +} + +static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) +{ + const struct ata_port_info *ppi[] = + { &vt6421_sport_info, &vt6421_sport_info, &vt6421_pport_info }; + struct ata_host *host; + int i, rc; + + *r_host = host = ata_host_alloc_pinfo(&pdev->dev, ppi, ARRAY_SIZE(ppi)); + if (!host) { + dev_err(&pdev->dev, "failed to allocate host\n"); + return -ENOMEM; + } + + rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME); + if (rc) { + dev_err(&pdev->dev, "failed to request/iomap PCI BARs (errno=%d)\n", + rc); + return rc; + } + host->iomap = pcim_iomap_table(pdev); + + for (i = 0; i < host->n_ports; i++) + vt6421_init_addrs(host->ports[i]); + + return dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK); +} + +static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) +{ + const struct ata_port_info *ppi[] = { &vt8251_port_info, NULL }; + struct ata_host *host; + int i, rc; + + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); + if (rc) + return rc; + *r_host = host; + + rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME); + if (rc) { + dev_err(&pdev->dev, "failed to iomap PCI BAR 5\n"); + return rc; + } + + /* 8251 hosts four sata ports as M/S of the two channels */ + for (i = 0; i < host->n_ports; i++) + ata_slave_link_init(host->ports[i]); + + return 0; +} + +static void svia_wd_fix(struct pci_dev *pdev) +{ + u8 tmp8; + + pci_read_config_byte(pdev, 0x52, &tmp8); + pci_write_config_byte(pdev, 0x52, tmp8 | BIT(2)); +} + +static irqreturn_t vt642x_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + irqreturn_t rc = ata_bmdma_interrupt(irq, dev_instance); + + /* if the IRQ was not handled, it might be a hotplug IRQ */ + if (rc != IRQ_HANDLED) { + u32 serror; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + /* check for hotplug on port 0 */ + svia_scr_read(&host->ports[0]->link, SCR_ERROR, &serror); + if (serror & SERR_PHYRDY_CHG) { + ata_ehi_hotplugged(&host->ports[0]->link.eh_info); + ata_port_freeze(host->ports[0]); + rc = IRQ_HANDLED; + } + /* check for hotplug on port 1 */ + svia_scr_read(&host->ports[1]->link, SCR_ERROR, &serror); + if (serror & SERR_PHYRDY_CHG) { + ata_ehi_hotplugged(&host->ports[1]->link.eh_info); + ata_port_freeze(host->ports[1]); + rc = IRQ_HANDLED; + } + spin_unlock_irqrestore(&host->lock, flags); + } + + return rc; +} + +static void vt6421_error_handler(struct ata_port *ap) +{ + struct svia_priv *hpriv = ap->host->private_data; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 serror; + + /* see svia_configure() for description */ + if (!hpriv->wd_workaround) { + svia_scr_read(&ap->link, SCR_ERROR, &serror); + if (serror == 0x1000500) { + ata_port_warn(ap, "Incompatible drive: enabling workaround. This slows down transfer rate to ~60 MB/s"); + svia_wd_fix(pdev); + hpriv->wd_workaround = true; + ap->link.eh_context.i.flags |= ATA_EHI_QUIET; + } + } + + ata_sff_error_handler(ap); +} + +static void svia_configure(struct pci_dev *pdev, int board_id, + struct svia_priv *hpriv) +{ + u8 tmp8; + + pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8); + dev_info(&pdev->dev, "routed to hard irq line %d\n", + (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f); + + /* make sure SATA channels are enabled */ + pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8); + if ((tmp8 & ALL_PORTS) != ALL_PORTS) { + dev_dbg(&pdev->dev, "enabling SATA channels (0x%x)\n", + (int)tmp8); + tmp8 |= ALL_PORTS; + pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8); + } + + /* make sure interrupts for each channel sent to us */ + pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8); + if ((tmp8 & ALL_PORTS) != ALL_PORTS) { + dev_dbg(&pdev->dev, "enabling SATA channel interrupts (0x%x)\n", + (int) tmp8); + tmp8 |= ALL_PORTS; + pci_write_config_byte(pdev, SATA_INT_GATE, tmp8); + } + + /* make sure native mode is enabled */ + pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8); + if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) { + dev_dbg(&pdev->dev, + "enabling SATA channel native mode (0x%x)\n", + (int) tmp8); + tmp8 |= NATIVE_MODE_ALL; + pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); + } + + if ((board_id == vt6420 && vt6420_hotplug) || board_id == vt6421) { + /* enable IRQ on hotplug */ + pci_read_config_byte(pdev, SVIA_MISC_3, &tmp8); + if ((tmp8 & SATA_HOTPLUG) != SATA_HOTPLUG) { + dev_dbg(&pdev->dev, + "enabling SATA hotplug (0x%x)\n", + (int) tmp8); + tmp8 |= SATA_HOTPLUG; + pci_write_config_byte(pdev, SVIA_MISC_3, tmp8); + } + } + + /* + * vt6420/1 has problems talking to some drives. The following + * is the fix from Joseph Chan . + * + * When host issues HOLD, device may send up to 20DW of data + * before acknowledging it with HOLDA and the host should be + * able to buffer them in FIFO. Unfortunately, some WD drives + * send up to 40DW before acknowledging HOLD and, in the + * default configuration, this ends up overflowing vt6421's + * FIFO, making the controller abort the transaction with + * R_ERR. + * + * Rx52[2] is the internal 128DW FIFO Flow control watermark + * adjusting mechanism enable bit and the default value 0 + * means host will issue HOLD to device when the left FIFO + * size goes below 32DW. Setting it to 1 makes the watermark + * 64DW. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=15173 + * http://article.gmane.org/gmane.linux.ide/46352 + * http://thread.gmane.org/gmane.linux.kernel/1062139 + * + * As the fix slows down data transfer, apply it only if the error + * actually appears - see vt6421_error_handler() + * Apply the fix always on vt6420 as we don't know if SCR_ERROR can be + * read safely. + */ + if (board_id == vt6420) { + svia_wd_fix(pdev); + hpriv->wd_workaround = true; + } +} + +static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + unsigned int i; + int rc; + struct ata_host *host = NULL; + int board_id = (int) ent->driver_data; + const unsigned *bar_sizes; + struct svia_priv *hpriv; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + if (board_id == vt6421) + bar_sizes = &vt6421_bar_sizes[0]; + else + bar_sizes = &svia_bar_sizes[0]; + + for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++) + if ((pci_resource_start(pdev, i) == 0) || + (pci_resource_len(pdev, i) < bar_sizes[i])) { + dev_err(&pdev->dev, + "invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n", + i, + (unsigned long long)pci_resource_start(pdev, i), + (unsigned long long)pci_resource_len(pdev, i)); + return -ENODEV; + } + + switch (board_id) { + case vt6420: + rc = vt6420_prepare_host(pdev, &host); + break; + case vt6421: + rc = vt6421_prepare_host(pdev, &host); + break; + case vt8251: + rc = vt8251_prepare_host(pdev, &host); + break; + default: + rc = -EINVAL; + } + if (rc) + return rc; + + hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + host->private_data = hpriv; + + svia_configure(pdev, board_id, hpriv); + + pci_set_master(pdev); + if ((board_id == vt6420 && vt6420_hotplug) || board_id == vt6421) + return ata_host_activate(host, pdev->irq, vt642x_interrupt, + IRQF_SHARED, &svia_sht); + else + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, + IRQF_SHARED, &svia_sht); +} + +#ifdef CONFIG_PM_SLEEP +static int svia_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + struct svia_priv *hpriv = host->private_data; + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + if (hpriv->wd_workaround) + svia_wd_fix(pdev); + ata_host_resume(host); + + return 0; +} +#endif + +module_pci_driver(svia_pci_driver); -- cgit v1.2.3