From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/clk/bcm/clk-ns2.c | 278 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 278 insertions(+) create mode 100644 drivers/clk/bcm/clk-ns2.c (limited to 'drivers/clk/bcm/clk-ns2.c') diff --git a/drivers/clk/bcm/clk-ns2.c b/drivers/clk/bcm/clk-ns2.c new file mode 100644 index 000000000..065f4290a --- /dev/null +++ b/drivers/clk/bcm/clk-ns2.c @@ -0,0 +1,278 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2015 Broadcom Corporation + +#include +#include +#include +#include +#include +#include + +#include +#include "clk-iproc.h" + +#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, } + +#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \ + .pwr_shift = ps, .iso_shift = is } + +#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \ + .p_reset_shift = prs } + +#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\ + .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \ + .ka_width = kaw } + +#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo } + +#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \ + .hold_shift = hs, .bypass_shift = bs } + +static const struct iproc_pll_ctrl genpll_scr = { + .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL, + .aon = AON_VAL(0x0, 1, 15, 12), + .reset = RESET_VAL(0x4, 2, 1), + .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3), + .ndiv_int = REG_VAL(0x8, 4, 10), + .pdiv = REG_VAL(0x8, 0, 4), + .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc), + .status = REG_VAL(0x0, 27, 1), +}; + + +static const struct iproc_clk_ctrl genpll_scr_clk[] = { + /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined + * in NS2. However, it doesn't appear to be used anywhere, so setting + * it to 0. + */ + [BCM_NS2_GENPLL_SCR_SCR_CLK] = { + .channel = BCM_NS2_GENPLL_SCR_SCR_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 18, 12, 0), + .mdiv = REG_VAL(0x18, 0, 8), + }, + [BCM_NS2_GENPLL_SCR_FS_CLK] = { + .channel = BCM_NS2_GENPLL_SCR_FS_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 19, 13, 0), + .mdiv = REG_VAL(0x18, 8, 8), + }, + [BCM_NS2_GENPLL_SCR_AUDIO_CLK] = { + .channel = BCM_NS2_GENPLL_SCR_AUDIO_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 20, 14, 0), + .mdiv = REG_VAL(0x14, 0, 8), + }, + [BCM_NS2_GENPLL_SCR_CH3_UNUSED] = { + .channel = BCM_NS2_GENPLL_SCR_CH3_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 21, 15, 0), + .mdiv = REG_VAL(0x14, 8, 8), + }, + [BCM_NS2_GENPLL_SCR_CH4_UNUSED] = { + .channel = BCM_NS2_GENPLL_SCR_CH4_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 22, 16, 0), + .mdiv = REG_VAL(0x14, 16, 8), + }, + [BCM_NS2_GENPLL_SCR_CH5_UNUSED] = { + .channel = BCM_NS2_GENPLL_SCR_CH5_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 23, 17, 0), + .mdiv = REG_VAL(0x14, 24, 8), + }, +}; + +static void __init ns2_genpll_scr_clk_init(struct device_node *node) +{ + iproc_pll_clk_setup(node, &genpll_scr, NULL, 0, genpll_scr_clk, + ARRAY_SIZE(genpll_scr_clk)); +} +CLK_OF_DECLARE(ns2_genpll_src_clk, "brcm,ns2-genpll-scr", + ns2_genpll_scr_clk_init); + +static const struct iproc_pll_ctrl genpll_sw = { + .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL, + .aon = AON_VAL(0x0, 1, 11, 10), + .reset = RESET_VAL(0x4, 2, 1), + .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3), + .ndiv_int = REG_VAL(0x8, 4, 10), + .pdiv = REG_VAL(0x8, 0, 4), + .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc), + .status = REG_VAL(0x0, 13, 1), +}; + +static const struct iproc_clk_ctrl genpll_sw_clk[] = { + /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined + * in NS2. However, it doesn't appear to be used anywhere, so setting + * it to 0. + */ + [BCM_NS2_GENPLL_SW_RPE_CLK] = { + .channel = BCM_NS2_GENPLL_SW_RPE_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 18, 12, 0), + .mdiv = REG_VAL(0x18, 0, 8), + }, + [BCM_NS2_GENPLL_SW_250_CLK] = { + .channel = BCM_NS2_GENPLL_SW_250_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 19, 13, 0), + .mdiv = REG_VAL(0x18, 8, 8), + }, + [BCM_NS2_GENPLL_SW_NIC_CLK] = { + .channel = BCM_NS2_GENPLL_SW_NIC_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 20, 14, 0), + .mdiv = REG_VAL(0x14, 0, 8), + }, + [BCM_NS2_GENPLL_SW_CHIMP_CLK] = { + .channel = BCM_NS2_GENPLL_SW_CHIMP_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 21, 15, 0), + .mdiv = REG_VAL(0x14, 8, 8), + }, + [BCM_NS2_GENPLL_SW_PORT_CLK] = { + .channel = BCM_NS2_GENPLL_SW_PORT_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 22, 16, 0), + .mdiv = REG_VAL(0x14, 16, 8), + }, + [BCM_NS2_GENPLL_SW_SDIO_CLK] = { + .channel = BCM_NS2_GENPLL_SW_SDIO_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 23, 17, 0), + .mdiv = REG_VAL(0x14, 24, 8), + }, +}; + +static void __init ns2_genpll_sw_clk_init(struct device_node *node) +{ + iproc_pll_clk_setup(node, &genpll_sw, NULL, 0, genpll_sw_clk, + ARRAY_SIZE(genpll_sw_clk)); +} +CLK_OF_DECLARE(ns2_genpll_sw_clk, "brcm,ns2-genpll-sw", + ns2_genpll_sw_clk_init); + +static const struct iproc_pll_ctrl lcpll_ddr = { + .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL, + .aon = AON_VAL(0x0, 2, 1, 0), + .reset = RESET_VAL(0x4, 2, 1), + .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4), + .ndiv_int = REG_VAL(0x8, 4, 10), + .pdiv = REG_VAL(0x8, 0, 4), + .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc), + .status = REG_VAL(0x0, 0, 1), +}; + +static const struct iproc_clk_ctrl lcpll_ddr_clk[] = { + /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined + * in NS2. However, it doesn't appear to be used anywhere, so setting + * it to 0. + */ + [BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK] = { + .channel = BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 18, 12, 0), + .mdiv = REG_VAL(0x14, 0, 8), + }, + [BCM_NS2_LCPLL_DDR_DDR_CLK] = { + .channel = BCM_NS2_LCPLL_DDR_DDR_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 19, 13, 0), + .mdiv = REG_VAL(0x14, 8, 8), + }, + [BCM_NS2_LCPLL_DDR_CH2_UNUSED] = { + .channel = BCM_NS2_LCPLL_DDR_CH2_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 20, 14, 0), + .mdiv = REG_VAL(0x10, 0, 8), + }, + [BCM_NS2_LCPLL_DDR_CH3_UNUSED] = { + .channel = BCM_NS2_LCPLL_DDR_CH3_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 21, 15, 0), + .mdiv = REG_VAL(0x10, 8, 8), + }, + [BCM_NS2_LCPLL_DDR_CH4_UNUSED] = { + .channel = BCM_NS2_LCPLL_DDR_CH4_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 22, 16, 0), + .mdiv = REG_VAL(0x10, 16, 8), + }, + [BCM_NS2_LCPLL_DDR_CH5_UNUSED] = { + .channel = BCM_NS2_LCPLL_DDR_CH5_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 23, 17, 0), + .mdiv = REG_VAL(0x10, 24, 8), + }, +}; + +static void __init ns2_lcpll_ddr_clk_init(struct device_node *node) +{ + iproc_pll_clk_setup(node, &lcpll_ddr, NULL, 0, lcpll_ddr_clk, + ARRAY_SIZE(lcpll_ddr_clk)); +} +CLK_OF_DECLARE(ns2_lcpll_ddr_clk, "brcm,ns2-lcpll-ddr", + ns2_lcpll_ddr_clk_init); + +static const struct iproc_pll_ctrl lcpll_ports = { + .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL, + .aon = AON_VAL(0x0, 2, 5, 4), + .reset = RESET_VAL(0x4, 2, 1), + .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4), + .ndiv_int = REG_VAL(0x8, 4, 10), + .pdiv = REG_VAL(0x8, 0, 4), + .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc), + .status = REG_VAL(0x0, 0, 1), +}; + +static const struct iproc_clk_ctrl lcpll_ports_clk[] = { + /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined + * in NS2. However, it doesn't appear to be used anywhere, so setting + * it to 0. + */ + [BCM_NS2_LCPLL_PORTS_WAN_CLK] = { + .channel = BCM_NS2_LCPLL_PORTS_WAN_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 18, 12, 0), + .mdiv = REG_VAL(0x14, 0, 8), + }, + [BCM_NS2_LCPLL_PORTS_RGMII_CLK] = { + .channel = BCM_NS2_LCPLL_PORTS_RGMII_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 19, 13, 0), + .mdiv = REG_VAL(0x14, 8, 8), + }, + [BCM_NS2_LCPLL_PORTS_CH2_UNUSED] = { + .channel = BCM_NS2_LCPLL_PORTS_CH2_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 20, 14, 0), + .mdiv = REG_VAL(0x10, 0, 8), + }, + [BCM_NS2_LCPLL_PORTS_CH3_UNUSED] = { + .channel = BCM_NS2_LCPLL_PORTS_CH3_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 21, 15, 0), + .mdiv = REG_VAL(0x10, 8, 8), + }, + [BCM_NS2_LCPLL_PORTS_CH4_UNUSED] = { + .channel = BCM_NS2_LCPLL_PORTS_CH4_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 22, 16, 0), + .mdiv = REG_VAL(0x10, 16, 8), + }, + [BCM_NS2_LCPLL_PORTS_CH5_UNUSED] = { + .channel = BCM_NS2_LCPLL_PORTS_CH5_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 23, 17, 0), + .mdiv = REG_VAL(0x10, 24, 8), + }, +}; + +static void __init ns2_lcpll_ports_clk_init(struct device_node *node) +{ + iproc_pll_clk_setup(node, &lcpll_ports, NULL, 0, lcpll_ports_clk, + ARRAY_SIZE(lcpll_ports_clk)); +} +CLK_OF_DECLARE(ns2_lcpll_ports_clk, "brcm,ns2-lcpll-ports", + ns2_lcpll_ports_clk_init); -- cgit v1.2.3