From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/crypto/caam/error.c | 393 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 393 insertions(+) create mode 100644 drivers/crypto/caam/error.c (limited to 'drivers/crypto/caam/error.c') diff --git a/drivers/crypto/caam/error.c b/drivers/crypto/caam/error.c new file mode 100644 index 000000000..72db90176 --- /dev/null +++ b/drivers/crypto/caam/error.c @@ -0,0 +1,393 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * CAAM Error Reporting + * + * Copyright 2009-2011 Freescale Semiconductor, Inc. + */ + +#include "compat.h" +#include "regs.h" +#include "desc.h" +#include "error.h" + +#ifdef DEBUG +#include + +void caam_dump_sg(const char *prefix_str, int prefix_type, + int rowsize, int groupsize, struct scatterlist *sg, + size_t tlen, bool ascii) +{ + struct scatterlist *it; + void *it_page; + size_t len; + void *buf; + + for (it = sg; it && tlen > 0 ; it = sg_next(it)) { + /* + * make sure the scatterlist's page + * has a valid virtual memory mapping + */ + it_page = kmap_atomic(sg_page(it)); + if (unlikely(!it_page)) { + pr_err("caam_dump_sg: kmap failed\n"); + return; + } + + buf = it_page + it->offset; + len = min_t(size_t, tlen, it->length); + print_hex_dump_debug(prefix_str, prefix_type, rowsize, + groupsize, buf, len, ascii); + tlen -= len; + + kunmap_atomic(it_page); + } +} +#else +void caam_dump_sg(const char *prefix_str, int prefix_type, + int rowsize, int groupsize, struct scatterlist *sg, + size_t tlen, bool ascii) +{} +#endif /* DEBUG */ +EXPORT_SYMBOL(caam_dump_sg); + +bool caam_little_end; +EXPORT_SYMBOL(caam_little_end); + +bool caam_imx; +EXPORT_SYMBOL(caam_imx); + +size_t caam_ptr_sz; +EXPORT_SYMBOL(caam_ptr_sz); + +static const struct { + u8 value; + const char *error_text; +} desc_error_list[] = { + { 0x00, "No error." }, + { 0x01, "SGT Length Error. The descriptor is trying to read more data than is contained in the SGT table." }, + { 0x02, "SGT Null Entry Error." }, + { 0x03, "Job Ring Control Error. There is a bad value in the Job Ring Control register." }, + { 0x04, "Invalid Descriptor Command. The Descriptor Command field is invalid." }, + { 0x05, "Reserved." }, + { 0x06, "Invalid KEY Command" }, + { 0x07, "Invalid LOAD Command" }, + { 0x08, "Invalid STORE Command" }, + { 0x09, "Invalid OPERATION Command" }, + { 0x0A, "Invalid FIFO LOAD Command" }, + { 0x0B, "Invalid FIFO STORE Command" }, + { 0x0C, "Invalid MOVE/MOVE_LEN Command" }, + { 0x0D, "Invalid JUMP Command. A nonlocal JUMP Command is invalid because the target is not a Job Header Command, or the jump is from a Trusted Descriptor to a Job Descriptor, or because the target Descriptor contains a Shared Descriptor." }, + { 0x0E, "Invalid MATH Command" }, + { 0x0F, "Invalid SIGNATURE Command" }, + { 0x10, "Invalid Sequence Command. A SEQ IN PTR OR SEQ OUT PTR Command is invalid or a SEQ KEY, SEQ LOAD, SEQ FIFO LOAD, or SEQ FIFO STORE decremented the input or output sequence length below 0. This error may result if a built-in PROTOCOL Command has encountered a malformed PDU." }, + { 0x11, "Skip data type invalid. The type must be 0xE or 0xF."}, + { 0x12, "Shared Descriptor Header Error" }, + { 0x13, "Header Error. Invalid length or parity, or certain other problems." }, + { 0x14, "Burster Error. Burster has gotten to an illegal state" }, + { 0x15, "Context Register Length Error. The descriptor is trying to read or write past the end of the Context Register. A SEQ LOAD or SEQ STORE with the VLF bit set was executed with too large a length in the variable length register (VSOL for SEQ STORE or VSIL for SEQ LOAD)." }, + { 0x16, "DMA Error" }, + { 0x17, "Reserved." }, + { 0x1A, "Job failed due to JR reset" }, + { 0x1B, "Job failed due to Fail Mode" }, + { 0x1C, "DECO Watchdog timer timeout error" }, + { 0x1D, "DECO tried to copy a key from another DECO but the other DECO's Key Registers were locked" }, + { 0x1E, "DECO attempted to copy data from a DECO that had an unmasked Descriptor error" }, + { 0x1F, "LIODN error. DECO was trying to share from itself or from another DECO but the two Non-SEQ LIODN values didn't match or the 'shared from' DECO's Descriptor required that the SEQ LIODNs be the same and they aren't." }, + { 0x20, "DECO has completed a reset initiated via the DRR register" }, + { 0x21, "Nonce error. When using EKT (CCM) key encryption option in the FIFO STORE Command, the Nonce counter reached its maximum value and this encryption mode can no longer be used." }, + { 0x22, "Meta data is too large (> 511 bytes) for TLS decap (input frame; block ciphers) and IPsec decap (output frame, when doing the next header byte update) and DCRC (output frame)." }, + { 0x23, "Read Input Frame error" }, + { 0x24, "JDKEK, TDKEK or TDSK not loaded error" }, + { 0x80, "DNR (do not run) error" }, + { 0x81, "undefined protocol command" }, + { 0x82, "invalid setting in PDB" }, + { 0x83, "Anti-replay LATE error" }, + { 0x84, "Anti-replay REPLAY error" }, + { 0x85, "Sequence number overflow" }, + { 0x86, "Sigver invalid signature" }, + { 0x87, "DSA Sign Illegal test descriptor" }, + { 0x88, "Protocol Format Error - A protocol has seen an error in the format of data received. When running RSA, this means that formatting with random padding was used, and did not follow the form: 0x00, 0x02, 8-to-N bytes of non-zero pad, 0x00, F data." }, + { 0x89, "Protocol Size Error - A protocol has seen an error in size. When running RSA, pdb size N < (size of F) when no formatting is used; or pdb size N < (F + 11) when formatting is used." }, + { 0xC1, "Blob Command error: Undefined mode" }, + { 0xC2, "Blob Command error: Secure Memory Blob mode error" }, + { 0xC4, "Blob Command error: Black Blob key or input size error" }, + { 0xC5, "Blob Command error: Invalid key destination" }, + { 0xC8, "Blob Command error: Trusted/Secure mode error" }, + { 0xF0, "IPsec TTL or hop limit field either came in as 0, or was decremented to 0" }, + { 0xF1, "3GPP HFN matches or exceeds the Threshold" }, +}; + +static const struct { + u8 value; + const char *error_text; +} qi_error_list[] = { + { 0x00, "No error" }, + { 0x1F, "Job terminated by FQ or ICID flush" }, + { 0x20, "FD format error"}, + { 0x21, "FD command format error"}, + { 0x23, "FL format error"}, + { 0x25, "CRJD specified in FD, but not enabled in FLC"}, + { 0x30, "Max. buffer size too small"}, + { 0x31, "DHR exceeds max. buffer size (allocate mode, S/G format)"}, + { 0x32, "SGT exceeds max. buffer size (allocate mode, S/G format"}, + { 0x33, "Size over/underflow (allocate mode)"}, + { 0x34, "Size over/underflow (reuse mode)"}, + { 0x35, "Length exceeds max. short length (allocate mode, S/G/ format)"}, + { 0x36, "Memory footprint exceeds max. value (allocate mode, S/G/ format)"}, + { 0x41, "SBC frame format not supported (allocate mode)"}, + { 0x42, "Pool 0 invalid / pool 1 size < pool 0 size (allocate mode)"}, + { 0x43, "Annotation output enabled but ASAR = 0 (allocate mode)"}, + { 0x44, "Unsupported or reserved frame format or SGHR = 1 (reuse mode)"}, + { 0x45, "DHR correction underflow (reuse mode, single buffer format)"}, + { 0x46, "Annotation length exceeds offset (reuse mode)"}, + { 0x48, "Annotation output enabled but ASA limited by ASAR (reuse mode)"}, + { 0x49, "Data offset correction exceeds input frame data length (reuse mode)"}, + { 0x4B, "Annotation output enabled but ASA cannot be expanded (frame list)"}, + { 0x51, "Unsupported IF reuse mode"}, + { 0x52, "Unsupported FL use mode"}, + { 0x53, "Unsupported RJD use mode"}, + { 0x54, "Unsupported inline descriptor use mode"}, + { 0xC0, "Table buffer pool 0 depletion"}, + { 0xC1, "Table buffer pool 1 depletion"}, + { 0xC2, "Data buffer pool 0 depletion, no OF allocated"}, + { 0xC3, "Data buffer pool 1 depletion, no OF allocated"}, + { 0xC4, "Data buffer pool 0 depletion, partial OF allocated"}, + { 0xC5, "Data buffer pool 1 depletion, partial OF allocated"}, + { 0xD0, "FLC read error"}, + { 0xD1, "FL read error"}, + { 0xD2, "FL write error"}, + { 0xD3, "OF SGT write error"}, + { 0xD4, "PTA read error"}, + { 0xD5, "PTA write error"}, + { 0xD6, "OF SGT F-bit write error"}, + { 0xD7, "ASA write error"}, + { 0xE1, "FLC[ICR]=0 ICID error"}, + { 0xE2, "FLC[ICR]=1 ICID error"}, + { 0xE4, "source of ICID flush not trusted (BDI = 0)"}, +}; + +static const char * const cha_id_list[] = { + "", + "AES", + "DES", + "ARC4", + "MDHA", + "RNG", + "SNOW f8", + "Kasumi f8/9", + "PKHA", + "CRCA", + "SNOW f9", + "ZUCE", + "ZUCA", +}; + +static const char * const err_id_list[] = { + "No error.", + "Mode error.", + "Data size error.", + "Key size error.", + "PKHA A memory size error.", + "PKHA B memory size error.", + "Data arrived out of sequence error.", + "PKHA divide-by-zero error.", + "PKHA modulus even error.", + "DES key parity error.", + "ICV check failed.", + "Hardware error.", + "Unsupported CCM AAD size.", + "Class 1 CHA is not reset", + "Invalid CHA combination was selected", + "Invalid CHA selected.", +}; + +static const char * const rng_err_id_list[] = { + "", + "", + "", + "Instantiate", + "Not instantiated", + "Test instantiate", + "Prediction resistance", + "Prediction resistance and test request", + "Uninstantiate", + "Secure key generation", + "", + "Hardware error", + "Continuous check" +}; + +static int report_ccb_status(struct device *jrdev, const u32 status, + const char *error) +{ + u8 cha_id = (status & JRSTA_CCBERR_CHAID_MASK) >> + JRSTA_CCBERR_CHAID_SHIFT; + u8 err_id = status & JRSTA_CCBERR_ERRID_MASK; + u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >> + JRSTA_DECOERR_INDEX_SHIFT; + char *idx_str; + const char *cha_str = "unidentified cha_id value 0x"; + char cha_err_code[3] = { 0 }; + const char *err_str = "unidentified err_id value 0x"; + char err_err_code[3] = { 0 }; + + if (status & JRSTA_DECOERR_JUMP) + idx_str = "jump tgt desc idx"; + else + idx_str = "desc idx"; + + if (cha_id < ARRAY_SIZE(cha_id_list)) + cha_str = cha_id_list[cha_id]; + else + snprintf(cha_err_code, sizeof(cha_err_code), "%02x", cha_id); + + if ((cha_id << JRSTA_CCBERR_CHAID_SHIFT) == JRSTA_CCBERR_CHAID_RNG && + err_id < ARRAY_SIZE(rng_err_id_list) && + strlen(rng_err_id_list[err_id])) { + /* RNG-only error */ + err_str = rng_err_id_list[err_id]; + } else { + err_str = err_id_list[err_id]; + } + + /* + * CCB ICV check failures are part of normal operation life; + * we leave the upper layers to do what they want with them. + */ + if (err_id == JRSTA_CCBERR_ERRID_ICVCHK) + return -EBADMSG; + + dev_err_ratelimited(jrdev, "%08x: %s: %s %d: %s%s: %s%s\n", status, + error, idx_str, idx, cha_str, cha_err_code, + err_str, err_err_code); + + return -EINVAL; +} + +static int report_jump_status(struct device *jrdev, const u32 status, + const char *error) +{ + dev_err(jrdev, "%08x: %s: %s() not implemented\n", + status, error, __func__); + + return -EINVAL; +} + +static int report_deco_status(struct device *jrdev, const u32 status, + const char *error) +{ + u8 err_id = status & JRSTA_DECOERR_ERROR_MASK; + u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >> + JRSTA_DECOERR_INDEX_SHIFT; + char *idx_str; + const char *err_str = "unidentified error value 0x"; + char err_err_code[3] = { 0 }; + int i; + + if (status & JRSTA_DECOERR_JUMP) + idx_str = "jump tgt desc idx"; + else + idx_str = "desc idx"; + + for (i = 0; i < ARRAY_SIZE(desc_error_list); i++) + if (desc_error_list[i].value == err_id) + break; + + if (i != ARRAY_SIZE(desc_error_list) && desc_error_list[i].error_text) + err_str = desc_error_list[i].error_text; + else + snprintf(err_err_code, sizeof(err_err_code), "%02x", err_id); + + dev_err(jrdev, "%08x: %s: %s %d: %s%s\n", + status, error, idx_str, idx, err_str, err_err_code); + + return -EINVAL; +} + +static int report_qi_status(struct device *qidev, const u32 status, + const char *error) +{ + u8 err_id = status & JRSTA_QIERR_ERROR_MASK; + const char *err_str = "unidentified error value 0x"; + char err_err_code[3] = { 0 }; + int i; + + for (i = 0; i < ARRAY_SIZE(qi_error_list); i++) + if (qi_error_list[i].value == err_id) + break; + + if (i != ARRAY_SIZE(qi_error_list) && qi_error_list[i].error_text) + err_str = qi_error_list[i].error_text; + else + snprintf(err_err_code, sizeof(err_err_code), "%02x", err_id); + + dev_err(qidev, "%08x: %s: %s%s\n", + status, error, err_str, err_err_code); + + return -EINVAL; +} + +static int report_jr_status(struct device *jrdev, const u32 status, + const char *error) +{ + dev_err(jrdev, "%08x: %s: %s() not implemented\n", + status, error, __func__); + + return -EINVAL; +} + +static int report_cond_code_status(struct device *jrdev, const u32 status, + const char *error) +{ + dev_err(jrdev, "%08x: %s: %s() not implemented\n", + status, error, __func__); + + return -EINVAL; +} + +int caam_strstatus(struct device *jrdev, u32 status, bool qi_v2) +{ + static const struct stat_src { + int (*report_ssed)(struct device *jrdev, const u32 status, + const char *error); + const char *error; + } status_src[16] = { + { NULL, "No error" }, + { NULL, NULL }, + { report_ccb_status, "CCB" }, + { report_jump_status, "Jump" }, + { report_deco_status, "DECO" }, + { report_qi_status, "Queue Manager Interface" }, + { report_jr_status, "Job Ring" }, + { report_cond_code_status, "Condition Code" }, + { NULL, NULL }, + { NULL, NULL }, + { NULL, NULL }, + { NULL, NULL }, + { NULL, NULL }, + { NULL, NULL }, + { NULL, NULL }, + { NULL, NULL }, + }; + u32 ssrc = status >> JRSTA_SSRC_SHIFT; + const char *error = status_src[ssrc].error; + + /* + * If there is an error handling function, call it to report the error. + * Otherwise print the error source name. + */ + if (status_src[ssrc].report_ssed) + return status_src[ssrc].report_ssed(jrdev, status, error); + + if (error) + dev_err(jrdev, "%d: %s\n", ssrc, error); + else + dev_err(jrdev, "%d: unknown error source\n", ssrc); + + return -EINVAL; +} +EXPORT_SYMBOL(caam_strstatus); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("FSL CAAM error reporting"); +MODULE_AUTHOR("Freescale Semiconductor"); -- cgit v1.2.3